drm/i915: Skip some timing checks on BXT/GLK DSI transcoders

commit 20c2dbff342aec13bf93c2f6c951da198916a455 upstream.

Apparently some BXT/GLK systems have DSI panels whose timings
don't agree with

drm/i915: Skip some timing checks on BXT/GLK DSI transcoders

commit 20c2dbff342aec13bf93c2f6c951da198916a455 upstream.

Apparently some BXT/GLK systems have DSI panels whose timings
don't agree with the normal cpu transcoder hblank>=32 limitation.
This is perhaps fine as there are no specific hblank/etc. limits
listed for the BXT/GLK DSI transcoders.

Move those checks out from the global intel_mode_valid() into
into connector specific .mode_valid() hooks, skipping BXT/GLK
DSI connectors. We'll leave the basic [hv]display/[hv]total
checks in intel_mode_valid() as those seem like sensible upper
limits regardless of the transcoder used.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9720
Fixes: 8f4b1068e7fc ("drm/i915: Check some transcoder timing minimum limits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit e0ef2daa8ca8ce4dbc2fd0959e383b753a87fd7d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

drm/i915/lvds: switch to drm_edid_read_switcheroo()

Use drm_edid_read_switcheroo() to switch from struct edid to struct
drm_edid.

Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Jani Nik

drm/i915/lvds: switch to drm_edid_read_switcheroo()

Use drm_edid_read_switcheroo() to switch from struct edid to struct
drm_edid.

Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/429cd6f23366cb4cace4fa13cf92ad068aca64dd.1685437501.git.jani.nikula@intel.com

show more ...

drm/i915/display: Add new member to configure PCON color conversion

The decision to use DFP output format conversion capabilities should be
during compute_config phase.

This patch adds new member t

drm/i915/display: Add new member to configure PCON color conversion

The decision to use DFP output format conversion capabilities should be
during compute_config phase.

This patch adds new member to crtc_state to represent the final
output_format to the sink. In case of a DFP this can be different than
the output_format, as per the format conversion done via the PCON.

This will help to store only the format conversion capabilities of the
DP device in intel_dp->dfp, and use crtc_state to compute and store the
configuration for color/format conversion for a given mode.

v2: modified the new member to crtc_state to represent the final
output_format that eaches the sink, after possible conversion by
PCON kind of devices. (Ville)

v3: Addressed comments from Ville:
-Added comments to clarify difference between sink_format and
output_format.
-Corrected the order of setting sink_format and output_format.
-Added readout for sink_format in get_pipe_config hooks.

v4: Set sink_format for intel_sdvo too. (Ville)

v5: Rebased.

v6: Fixed condition to go for YCbCr420 format for dp and hdmi. (Ville)

v7: Fix the condition to set sink_format for HDMI.
Set hdmi output_format simply as sink_format. (Ville)

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v3)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427125605.487769-2-ankit.k.nautiyal@intel.com

show more ...

drm/i915: Namespace pfit registers properly

Give the PFIT_CONTROL bits a consistent namespace.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/p

drm/i915: Namespace pfit registers properly

Give the PFIT_CONTROL bits a consistent namespace.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418175528.13117-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

show more ...

drm/i915/pps: split out PPS regs to a separate file

Clean up i915_reg.h by splitting out PPS regs to
display/intel_pps_regs.h.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nirmoy

drm/i915/pps: split out PPS regs to a separate file

Clean up i915_reg.h by splitting out PPS regs to
display/intel_pps_regs.h.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/80d66ee6d7e56153a0ab25640ac2dad239b1ef6e.1678973282.git.jani.nikula@intel.com

show more ...

drm/i915: s/PIPECONF/TRANSCONF/

Rename PIPECONF to TRANSCONF to make it clear what it actually
applies to.

While the usual convention is to pick the earliers name I think
in this case it's more cle

drm/i915: s/PIPECONF/TRANSCONF/

Rename PIPECONF to TRANSCONF to make it clear what it actually
applies to.

While the usual convention is to pick the earliers name I think
in this case it's more clear to use the later name. Especially
as even the register offset is in the wrong range (0x70000 vs.
0x60000) and thus makes it look like this is per-pipe.

There is one place in gvt that's doing something with TRANSCONF
while iterating with for_each_pipe(). So that might not be doing
the right thing for TRANSCODER_EDP, dunno. Not knowing what it
does I left it as is to avoid breakage.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230213225258.2127-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

show more ...

drm/i915/lvds: s/pipe_config/crtc_state/

Call the crtc state 'crtc_state' rather than 'pipe_config',
as is the modern style.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https

drm/i915/lvds: s/pipe_config/crtc_state/

Call the crtc state 'crtc_state' rather than 'pipe_config',
as is the modern style.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

show more ...

drm/i915/lvds: s/intel_encoder/encoder/ etc.

Get rid of some of the annoying aliasing drm_ vs.
intel_ encoder/connector variables. Just prefer the
intel_ types.

Signed-off-by: Ville Syrjälä <ville.

drm/i915/lvds: s/intel_encoder/encoder/ etc.

Get rid of some of the annoying aliasing drm_ vs.
intel_ encoder/connector variables. Just prefer the
intel_ types.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

show more ...

drm/i915/lvds: s/dev_priv/i915/

Do the customary s/dev_priv/i915/ rename and aliasing
'dev' pointer removal. Though various register definitions
still depend on the magic 'dev_priv' variable so not

drm/i915/lvds: s/dev_priv/i915/

Do the customary s/dev_priv/i915/ rename and aliasing
'dev' pointer removal. Though various register definitions
still depend on the magic 'dev_priv' variable so not
a 100% conversion.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

show more ...

drm/i915/lvds: Fix whitespace

Replace some stray spaces with tabs.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.89

drm/i915/lvds: Fix whitespace

Replace some stray spaces with tabs.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

show more ...

drm/i915/lvds: Extract intel_lvds_regs.h

Extract the integrated LVDS port register definitions
into their own header file.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https:/

drm/i915/lvds: Extract intel_lvds_regs.h

Extract the integrated LVDS port register definitions
into their own header file.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

show more ...

drm/i915/lvds: Use REG_BIT() & co.

Use REG_BIT() & co. for the LVDS port register.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2

drm/i915/lvds: Use REG_BIT() & co.

Use REG_BIT() & co. for the LVDS port register.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

show more ...

drm/i915/lvds: Use intel_de_rmw()

Replace the hand rolled rmw stuff with intel_de_rmw().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/m

drm/i915/lvds: Use intel_de_rmw()

Replace the hand rolled rmw stuff with intel_de_rmw().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

show more ...

drm/i915/lvds: Split long lines

Split some overly long lines.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-2-

drm/i915/lvds: Split long lines

Split some overly long lines.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

show more ...

drm/i915/panel: move panel fixed EDID to struct intel_panel

It's a bit confusing to have two cached EDIDs in struct intel_connector
with slightly different purposes. Make the distinction a bit clear

drm/i915/panel: move panel fixed EDID to struct intel_panel

It's a bit confusing to have two cached EDIDs in struct intel_connector
with slightly different purposes. Make the distinction a bit clearer by
moving the EDID cached for eDP and LVDS panels at connector init time to
struct intel_panel, and name it fixed_edid. That's what it is, a fixed
EDID for the panels.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/328350ef918638928a8286cdbab3107c8258332d.1674643465.git.jani.nikula@intel.com

show more ...

drm/i915/bios: convert intel_bios_init_panel() to drm_edid

Try to use struct drm_edid where possible, even if having to fall back
to looking into struct edid down low via drm_edid_raw().

v2: Rebase

drm/i915/bios: convert intel_bios_init_panel() to drm_edid

Try to use struct drm_edid where possible, even if having to fall back
to looking into struct edid down low via drm_edid_raw().

v2: Rebase

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/897807d62f74f690a173ecd405e25c6ccdd63b98.1674643465.git.jani.nikula@intel.com

show more ...

drm/i915/edid: convert DP, HDMI and LVDS to drm_edid

Convert all the connectors that use cached connector edid and
detect_edid to drm_edid.

Since drm_get_edid() calls drm_connector_update_edid_prop

drm/i915/edid: convert DP, HDMI and LVDS to drm_edid

Convert all the connectors that use cached connector edid and
detect_edid to drm_edid.

Since drm_get_edid() calls drm_connector_update_edid_property() while
drm_edid_read*() do not, we need to call drm_edid_connector_update()
separately, in part due to the EDID caching behaviour in HDMI and
DP. Especially DP depends on the details parsed from EDID. (The big
behavioural change conflating EDID reading with parsing and property
update was done in commit 5186421cbfe2 ("drm: Introduce epoch counter to
drm_connector"))

v6: Rebase on drm_edid_connector_add_modes()

v5: Fix potential uninitialized var use (kernel test robot <lkp@intel.com>)

v4: Call drm_edid_connector_update() after reading HDMI/DP EDID

v3: Don't leak vga switcheroo EDID in LVDS init (Ville)

v2: Don't leak opregion fallback EDID (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/eabb4de932841b38b34cc2818ea9fbf7c10224fd.1674643465.git.jani.nikula@intel.com

show more ...

drm/i915: Do panel VBT init early if the VBT declares an explicit panel type

Lots of ADL machines out there with bogus VBTs that declare
two eDP child devices. In order for those to work we need to

drm/i915: Do panel VBT init early if the VBT declares an explicit panel type

Lots of ADL machines out there with bogus VBTs that declare
two eDP child devices. In order for those to work we need to
figure out which power sequencer to use before we try the EDID
read. So let's do the panel VBT init early if we can, falling
back to the post-EDID init otherwise.

The post-EDID init panel_type=0xff approach of assuming the
power sequencer should already be enabled doesn't really work
with multiple eDP panels, and currently we just end up using
the same power sequencer for both eDP ports, which at least
confuses the wakeref tracking, and potentially also causes us
to toggle the VDD for the panel when we should not.

Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125173156.31689-3-ville.syrjala@linux.intel.com

show more ...

drm/i915: stop including i915_irq.h from i915_trace.h

Turns out many of the files that need i915_reg.h get it implicitly via
{display/intel_de.h, gt/intel_context.h} -> i915_trace.h -> i915_irq.h
->

drm/i915: stop including i915_irq.h from i915_trace.h

Turns out many of the files that need i915_reg.h get it implicitly via
{display/intel_de.h, gt/intel_context.h} -> i915_trace.h -> i915_irq.h
-> i915_reg.h. Since i915_trace.h doesn't actually need i915_irq.h,
makes sense to drop it, but that requires adding quite a few new
includes all over the place.

Prefer including i915_reg.h where needed instead of adding another
implicit include, because eventually we'll want to split up i915_reg.h
and only include the specific registers at each place.

Also some places actually needed i915_irq.h too.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e78a2e0ac1bffaf5af3b5ccc21dff05e6518cef.1668008071.git.jani.nikula@intel.com

show more ...

drm/i915: Simplify intel_panel_add_edid_alt_fixed_modes()

Since commit a5810f551d0a ("drm/i915: Allow more varied alternate
fixed modes for panels") intel_panel_add_edid_alt_fixed_modes()
no longer

drm/i915: Simplify intel_panel_add_edid_alt_fixed_modes()

Since commit a5810f551d0a ("drm/i915: Allow more varied alternate
fixed modes for panels") intel_panel_add_edid_alt_fixed_modes()
no longer considers vrr vs. drrs separately. So no reason to
pass them as separate parameters either.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927180615.25476-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit eb89e83c152b122a94e79527d63cb7c79823c37e)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

drm/i915/display: remove drm_device aliases

drm_device pointers are unwelcome.

Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by

drm/i915/display: remove drm_device aliases

drm_device pointers are unwelcome.

Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006204844.2831303-1-andrzej.hajda@intel.com

show more ...

drm/i915: Allow alternate fixed modes always for LVDS

As with eDP let's stop considering the VBTs DRRS knobs and
just always accept all otherwise suitable EDID modes. This
appears to be how Windows

drm/i915: Allow alternate fixed modes always for LVDS

As with eDP let's stop considering the VBTs DRRS knobs and
just always accept all otherwise suitable EDID modes. This
appears to be how Windows does it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927180615.25476-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

show more ...

drm/i915: Simplify intel_panel_add_edid_alt_fixed_modes()

Since commit a5810f551d0a ("drm/i915: Allow more varied alternate
fixed modes for panels") intel_panel_add_edid_alt_fixed_modes()
no longer

drm/i915: Simplify intel_panel_add_edid_alt_fixed_modes()

Since commit a5810f551d0a ("drm/i915: Allow more varied alternate
fixed modes for panels") intel_panel_add_edid_alt_fixed_modes()
no longer considers vrr vs. drrs separately. So no reason to
pass them as separate parameters either.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927180615.25476-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

show more ...

drm/i915: Clean up connector->*_allowed setup

All the connectors are zero initialized so no need to clear
the *_allowed flags we don't support. Only leave the ones we want
to set. And while at it sw

drm/i915: Clean up connector->*_allowed setup

All the connectors are zero initialized so no need to clear
the *_allowed flags we don't support. Only leave the ones we want
to set. And while at it switch to booleans instead of ints.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

show more ...

drm/i915: Extract intel_attach_scaling_mode_property()

Consolidate the scaling_mode property setup into a single
place.

The one slight complicateion here is that GMCH platforms can't
do the CENTER

drm/i915: Extract intel_attach_scaling_mode_property()

Consolidate the scaling_mode property setup into a single
place.

The one slight complicateion here is that GMCH platforms can't
do the CENTER mode except on the LVDS port. But we can deal with
that by just checking the connector type.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-12-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

show more ...