drm/connector: Fix typo in output format

The HDMI specification mentions YCbCr everywhere, but our enums have
YCrCb. Let's rename it to match.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Revie

drm/connector: Fix typo in output format

The HDMI specification mentions YCbCr everywhere, but our enums have
YCrCb. Let's rename it to match.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-5-maxime@cerno.tech

show more ...

drm/komeda: Enable new product D32 support

D32 is simple version of D71, the difference is:
- Only has one pipeline
- Drop the periph block and merge it to GCU

v2: Rebase.
v3: Isolate the block cou

drm/komeda: Enable new product D32 support

D32 is simple version of D71, the difference is:
- Only has one pipeline
- Drop the periph block and merge it to GCU

v2: Rebase.
v3: Isolate the block counting fix to a new patch

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084828.19664-3-james.qian.wang@arm.com

show more ...

drm/komeda: Adds gamma and color-transform support for DOU-IPS

Adds gamma and color-transform support for DOU-IPS.
Adds two caps members fgamma_coeffs and ctm_coeffs to komeda_improc_state.
If color

drm/komeda: Adds gamma and color-transform support for DOU-IPS

Adds gamma and color-transform support for DOU-IPS.
Adds two caps members fgamma_coeffs and ctm_coeffs to komeda_improc_state.
If color management changed, set gamma and color-transform accordingly.

v5: Rebase with drm-misc-next

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112110927.20931-5-james.qian.wang@arm.com

show more ...

drm/komeda: Dump SC_ENH_* registers from scaler block

Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: h

drm/komeda: Dump SC_ENH_* registers from scaler block

Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015105936.50039-1-mihail.atanassov@arm.com

show more ...

drm/komeda: Adds output-color format support

Sets output color format according to the connector formats and
display supported formats. Default value is RGB444 and only force
YUV format which must b

drm/komeda: Adds output-color format support

Sets output color format according to the connector formats and
display supported formats. Default value is RGB444 and only force
YUV format which must be YUV.

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015091019.26021-1-lowry.li@arm.com

show more ...

drm/komeda: Set output color depth for output

Set color_depth according to connector->bpc.

Changes since v1:
- Fixed min_bpc is effectively set but not used in
komeda_crtc_get_color_config().

Cha

drm/komeda: Set output color depth for output

Set color_depth according to connector->bpc.

Changes since v1:
- Fixed min_bpc is effectively set but not used in
komeda_crtc_get_color_config().

Changes since v2:
- Align the code.

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191012065030.12691-1-lowry.li@arm.com

show more ...

drm/komeda: Adds layer horizontal input size limitation check for D71

Adds maximum line size check according to the AFBC decoder limitation
and special Line size limitation(2046) for format: YUV420_

drm/komeda: Adds layer horizontal input size limitation check for D71

Adds maximum line size check according to the AFBC decoder limitation
and special Line size limitation(2046) for format: YUV420_10BIT and X0L2.

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924080022.19250-3-lowry.li@arm.com

show more ...

drm/komeda: Add line size support

On D71, we are using the global line size. From D32, every
component have a line size register to indicate the fifo size.

So this patch is to set line size support

drm/komeda: Add line size support

On D71, we are using the global line size. From D32, every
component have a line size register to indicate the fifo size.

So this patch is to set line size support and do the line size
check.

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924080022.19250-2-lowry.li@arm.com

show more ...

drm/komeda: Adds register dump support for gcu, lup and dou

Adds to support register dump on lpu and dou of pipeline and gcu on D71

Changes since v1:
- For a constant format without additional argu

drm/komeda: Adds register dump support for gcu, lup and dou

Adds to support register dump on lpu and dou of pipeline and gcu on D71

Changes since v1:
- For a constant format without additional arguments, use seq_puts()
instead of seq_printf().

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190917112525.25490-1-lowry.li@arm.com

show more ...

drm/komeda: Enable dual-link support

Komeda HW can support dual-link which splits display frame to two halves
(left/link0, right/link1) and output them by two output links.
Due to the halved pixel r

drm/komeda: Enable dual-link support

Komeda HW can support dual-link which splits display frame to two halves
(left/link0, right/link1) and output them by two output links.
Due to the halved pixel rate of each link, the pxlclk of dual-link can be
reduced two times compare with single-link.

For enabling dual-link:
- The DT need to configure two output-links for the pipeline node.
- Komeda enable dual-link when both link0 and link1 have been connected.

Example of how the pipeline node will look like for dual-link setup

pipe0: pipeline@0 {
clocks = <&fpgaosc2>;
clock-names = "pxclk";
reg = <0>;

#address-cells = <1>;
#size-cells = <0>;

port@0 {
reg = <0>;

#address-cells = <1>;
#size-cells = <0>;
dp0_pipe0_link0: endpoint@0 {
reg = <0>;
remote-endpoint = <&dlink_connector_in0>;

};
dp0_pipe0_link1: endpoint@1 {
reg = <1>;
remote-endpoint = <&dlink_connector_in1>;
};
};
};

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618081013.13638-3-james.qian.wang@arm.com

show more ...

drm/komeda: Use drm_display_mode "crtc_" prefixed hardware timings

struct drm_display_mode contains two copies of timings.
- plain timings.
- hardware timings, the ones with "crtc_" prefix.
Accordin

drm/komeda: Use drm_display_mode "crtc_" prefixed hardware timings

struct drm_display_mode contains two copies of timings.
- plain timings.
- hardware timings, the ones with "crtc_" prefix.
According to the definition, update komeda to use the hardware timing.

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618081013.13638-2-james.qian.wang@arm.com

show more ...

drm/komeda: Add new component komeda_splitter

Similar to Layer Split, but Splitter is used for writeback, which splits
the compiz result to two half parts and then feed them to two scalers.

v2: Reb

drm/komeda: Add new component komeda_splitter

Similar to Layer Split, but Splitter is used for writeback, which splits
the compiz result to two half parts and then feed them to two scalers.

v2: Rebase

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>

show more ...

drm/komeda: Refine function to_d71_input_id

Since the component_state->input[i] is only valid when it is active, the
content of input[i] is undefined if it is inactive. The user must check the
state

drm/komeda: Refine function to_d71_input_id

Since the component_state->input[i] is only valid when it is active, the
content of input[i] is undefined if it is inactive. The user must check the
state->active_inputs with input index firstly before using state->input[i].
Refine the function to_d71_input_id and directly move such check into it.
Simplify the using and avoid problem that caller forget the valid check.

Depends on:
- https://patchwork.freedesktop.org/series/60856/

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>

show more ...

drm/komeda: Add split support for scaler

To achieve same caling effect compare with none split, the texel
calculation need to use the same scaling ratio before split, so add
"total_xxx" to pipeline

drm/komeda: Add split support for scaler

To achieve same caling effect compare with none split, the texel
calculation need to use the same scaling ratio before split, so add
"total_xxx" to pipeline to describe the hsize/vsize before split.
Update pipeline and d71_scaler_update accordingly.

v2: Rebase and addressed Liviu's comments

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

show more ...

drm/komeda: Add component komeda_merger

Introduce a new component komeda_merger, because D71 HW supports to split
a whole image to two half parts and does the scaling independently. Merger
merges tw

drm/komeda: Add component komeda_merger

Introduce a new component komeda_merger, because D71 HW supports to split
a whole image to two half parts and does the scaling independently. Merger
merges two separate results to one, and output it to compositor or wb_layer
For this patch:
- Add the definition of komeda_merger/merger_state
- Report and initialize komeda_merger according to the D71 HW.

v2: Rebase

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

show more ...

drm/komeda: Rename main engine clk name "mclk" to "aclk"

To avoid confusion, unify the driver main engine clk name "mclk" to
the spec name "aclk".

Signed-off-by: James Qian Wang (Arm Technology Chi

drm/komeda: Rename main engine clk name "mclk" to "aclk"

To avoid confusion, unify the driver main engine clk name "mclk" to
the spec name "aclk".

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

show more ...

drm/komeda: Add format support for Y0L2, P010, YUV420_8/10BIT

- Y0L2 and P010 are block (tiled) format, Update the kemeda logic to
compatible with such block format.
- Since DRM introduced a general

drm/komeda: Add format support for Y0L2, P010, YUV420_8/10BIT

- Y0L2 and P010 are block (tiled) format, Update the kemeda logic to
compatible with such block format.
- Since DRM introduced a general block information to drm_format_info,
the format_caps->tiled_size no long needed, delete it.
- Build some fb utils functions for code sharing.

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

show more ...

drm/komeda: Adds SMMU support

Adds iommu_connect and disconnect for SMMU support, and configures
TBU translation once SMMU has been attached to the display device.

Signed-off-by: Lowry Li (Arm Tech

drm/komeda: Adds SMMU support

Adds iommu_connect and disconnect for SMMU support, and configures
TBU translation once SMMU has been attached to the display device.

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
[fixed checking of error code returned by dp_wait_cond() and removed
extraneous DRM_ERROR() calls]
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

show more ...

drm/komeda: Enable color-encoding (YUV format) support

Adds color-encoding properties if layer can support YUV format.
Updates HW YUV-RGB matrix state according to the color-encoding
properties.

Si

drm/komeda: Enable color-encoding (YUV format) support

Adds color-encoding properties if layer can support YUV format.
Updates HW YUV-RGB matrix state according to the color-encoding
properties.

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

show more ...

drm/komeda: Update HW up-sampling on D71

Updates HW up-sampling method according to the format type.

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (

drm/komeda: Update HW up-sampling on D71

Updates HW up-sampling method according to the format type.

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

show more ...

drm/komeda: Clear enable bit in CU_INPUTx_CONTROL

Besides clearing the input ID to zero, D71 compiz also has input
enable bit in CU_INPUTx_CONTROL which need to be cleared.

Signed-off-by: Lowry Li

drm/komeda: Clear enable bit in CU_INPUTx_CONTROL

Besides clearing the input ID to zero, D71 compiz also has input
enable bit in CU_INPUTx_CONTROL which need to be cleared.

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

show more ...

drm/komeda: Add image enhancement support

Besides scaling, Arm display scaler also can support image enhancement.
For support it, Add a new property "img_enhancement" to plane, then user
can turn on

drm/komeda: Add image enhancement support

Besides scaling, Arm display scaler also can support image enhancement.
For support it, Add a new property "img_enhancement" to plane, then user
can turn on/off it by this property, and kernel follow user's requirement
to maitain the state and enable/disable the real HW image enhancement.

v2: Rebase and rename "needs_img_enhancement" to "en_img_enhancement"

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

show more ...

drm/komeda: Add engine clock requirement check for the downscaling

For downscaling there is a restriction, the downscaling needed engine
clock can not acceed the real engine clock, and the clock req

drm/komeda: Add engine clock requirement check for the downscaling

For downscaling there is a restriction, the downscaling needed engine
clock can not acceed the real engine clock, and the clock requirement
mostly depend on the specific HW, to solve this problem:
1. Add a pipeline func - downscaling_clk_check for CORE to query the real
HW if downscaling can be supported.
2. Add new property clock ratio which is the ratio of:
(mclk << 32) / pxlclk
then User driver can use this ratio to do the clock check to avoid post
an invalid downscaling to kernel.

v2: Rebase and Delete debug print

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

show more ...

drm/komeda: Implement D71 scaler support

1. Add scaler component and initialize it according to D71 HW.
2. Implement d71_scaler_update/disable/dump

v2:
- Correct a typo
- Constify component_funcs:

drm/komeda: Implement D71 scaler support

1. Add scaler component and initialize it according to D71 HW.
2. Implement d71_scaler_update/disable/dump

v2:
- Correct a typo
- Constify component_funcs: d71_scaler_funcs

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

show more ...

drm/komeda: Added AFBC support for komeda driver

For supporting AFBC:
1. Check if the user requested modifier can be supported by display HW.
2. Check the obj->size with AFBC's requirement.
3. Confi

drm/komeda: Added AFBC support for komeda driver

For supporting AFBC:
1. Check if the user requested modifier can be supported by display HW.
2. Check the obj->size with AFBC's requirement.
3. Configure HW according to the modifier (afbc features)

This patch depends on:
- https://patchwork.freedesktop.org/series/59915/
- https://patchwork.freedesktop.org/series/59000/

v2: Rebase and addressed Ayan's comments

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

show more ...