clk: ti: change ti_clk_register[_omap_hw]() API

The ti_clk_register() and ti_clk_register_omap_hw() functions are always
called with the parameter of type "struct device" set to NULL, since the
func

clk: ti: change ti_clk_register[_omap_hw]() API

The ti_clk_register() and ti_clk_register_omap_hw() functions are always
called with the parameter of type "struct device" set to NULL, since the
functions from which they are called always have a parameter of type
"struct device_node". Replacing "struct device" type parameter with
"struct device_node" will allow you to register a TI clock to the common
clock framework by taking advantage of the facilities provided by the
"struct device_node" type. Further, adding the "of_" prefix to the name
of these functions explicitly binds them to the "struct device_node"
type.

The patch has been tested on a Beaglebone board.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221113181147.1626585-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE

Based on the normalized pattern:

this program is free software you can redistribute it and/or modify it
under the

treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE

Based on the normalized pattern:

this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license version 2 as
published by the free software foundation this program is distributed
as is without any warranty of any kind whether express or implied
without even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference.

Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

clk: ti: composite: Prefer kcalloc over open coded arithmetic

As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially

clk: ti: composite: Prefer kcalloc over open coded arithmetic

As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.

So, use the purpose specific kcalloc() function instead of the argument
size * count in the kzalloc() function.

[1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments

Signed-off-by: Len Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20210904131714.2312-1-len.baker@gmx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: ti: Update component clocks to use ti_dt_clk_name()

Let's update all the TI component clocks to use ti_dt_clk_name() instead
of devicetree node name if available.

Signed-off-by: Tony Lindgren

clk: ti: Update component clocks to use ti_dt_clk_name()

Let's update all the TI component clocks to use ti_dt_clk_name() instead
of devicetree node name if available.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220204071449.16762-9-tony@atomide.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: ti: composite: fix memory leak

The parent_names is never released for a component clock definition,
causing some memory leak. Fix by releasing it once it is no longer
needed.

Reported-by: Tomi

clk: ti: composite: fix memory leak

The parent_names is never released for a component clock definition,
causing some memory leak. Fix by releasing it once it is no longer
needed.

Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lkml.kernel.org/r/20200429131341.4697-2-t-kristo@ti.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: Convert to using %pOFn instead of device_node.name

In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Cc: Eugeniy P

clk: Convert to using %pOFn instead of device_node.name

In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: ti: Drop legacy clk-3xxx-legacy code

We have now had omap3 booting in device tree only mode for a while
and all this code is unused.

Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony

clk: ti: Drop legacy clk-3xxx-legacy code

We have now had omap3 booting in device tree only mode for a while
and all this code is unused.

Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

show more ...

clk: ti: convert retry_init param to use void data type

User data should be void type, as the core framework doesn't need to
know what is passed through.

Signed-off-by: Tero Kristo <t-kristo@ti.com

clk: ti: convert retry_init param to use void data type

User data should be void type, as the core framework doesn't need to
know what is passed through.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: ti: enforce const types on string arrays

Constant string arrays should use const char * const instead of just
const char *. Change the implementations using these to proper type.

Signed-off-by

clk: ti: enforce const types on string arrays

Constant string arrays should use const char * const instead of just
const char *. Change the implementations using these to proper type.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>

show more ...

clk: ti: use automatic clock alias generation framework

Generate clock aliases automatically for all TI clock drivers.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@ato

clk: ti: use automatic clock alias generation framework

Generate clock aliases automatically for all TI clock drivers.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>

show more ...

clk: ti: Update for of_clk_get_parent_count() returning unsigned int

Change the types here to unsigned int instead of int and update
the checks for == 0 instead < 1 to be more explicit about what's

clk: ti: Update for of_clk_get_parent_count() returning unsigned int

Change the types here to unsigned int instead of int and update
the checks for == 0 instead < 1 to be more explicit about what's
going on now that of_clk_get_parent_count() has changed return
types.

Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: move the common clock's to_clk_*(_hw) macros to clk-provider.h

to_clk_*(_hw) macros have been repeatedly defined in many places.
This patch moves all the to_clk_*(_hw) definitions in the common

clk: move the common clock's to_clk_*(_hw) macros to clk-provider.h

to_clk_*(_hw) macros have been repeatedly defined in many places.
This patch moves all the to_clk_*(_hw) definitions in the common
clock framework to public header clk-provider.h, and drop the local
definitions.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: ti: make use of of_clk_parent_fill helper function

Use of_clk_parent_fill to fill in the parent clock names' array.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Tero Kristo

clk: ti: make use of of_clk_parent_fill helper function

Use of_clk_parent_fill to fill in the parent clock names' array.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: don't use __initconst for non-const arrays

The statement

static const char *name[];

defines a modifiable array of pointers to constant chars. That is

*name[0] = 'f';

is forbidden, but

n

clk: don't use __initconst for non-const arrays

The statement

static const char *name[];

defines a modifiable array of pointers to constant chars. That is

*name[0] = 'f';

is forbidden, but

name[0] = "f";

is not. So marking an array that is defined as above with __initconst is
wrong. Either an additional const must be added such that the whole
definition reads:

static const char *const name[] __initconst;

or where this is not possible __initdata must be used.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Turquette <mturquette@linaro.org>

show more ...

clk: omap: compile legacy omap3 clocks conditionally

The 'ARM: OMAP3: legacy clock data move under clk driver' patch series
causes build errors when CONFIG_OMAP3 is not set:

drivers/clk/ti/dpll.c:

clk: omap: compile legacy omap3 clocks conditionally

The 'ARM: OMAP3: legacy clock data move under clk driver' patch series
causes build errors when CONFIG_OMAP3 is not set:

drivers/clk/ti/dpll.c: In function 'ti_clk_register_dpll':
drivers/clk/ti/dpll.c:199:31: error: 'omap3_dpll_ck_ops' undeclared (first use in this function)
const struct clk_ops *ops = &omap3_dpll_ck_ops;
^
drivers/clk/ti/dpll.c:199:31: note: each undeclared identifier is reported only once for each function it appears in
drivers/clk/ti/dpll.c:259:10: error: 'omap3_dpll_per_ck_ops' undeclared (first use in this function)
ops = &omap3_dpll_per_ck_ops;
^

drivers/built-in.o: In function `ti_clk_register_gate':
drivers/clk/ti/gate.c:179: undefined reference to `clkhwops_omap3430es2_dss_usbhost_wait'
drivers/clk/ti/gate.c:179: undefined reference to `clkhwops_am35xx_ipss_module_wait'
-in.o: In function `ti_clk_register_interface':
drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_omap3430es2_iclk_hsotgusb_wait'
drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_omap3430es2_iclk_dss_usbhost_wait'
drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_omap3430es2_iclk_ssi_wait'
drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_am35xx_ipss_wait'
drivers/built-in.o: In function `ti_clk_register_composite':
:(.text+0x3da768): undefined reference to `ti_clk_build_component_gate'

In order to fix that problem, this patch makes the omap3 legacy code
compiled only when both CONFIG_OMAP3 and CONFIG_ATAGS are set.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>

show more ...

clk: ti: composite: add support for legacy composite clock init

Legacy clock data is initialized slightly differently compared to
DT clocks, thus add support for this.

Signed-off-by: Tero Kristo <t

clk: ti: composite: add support for legacy composite clock init

Legacy clock data is initialized slightly differently compared to
DT clocks, thus add support for this.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>

show more ...

clk: ti: add support for basic mux clock

ti,mux-clock provides now a binding for basic mux support. This is just
using the basic clock type.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: T

clk: ti: add support for basic mux clock

ti,mux-clock provides now a binding for basic mux support. This is just
using the basic clock type.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

show more ...

CLK: ti: add support for ti divider-clock

This patch adds support for TI divider clock binding, which simply uses
the basic clock divider to provide the features needed.

Signed-off-by: Tero Kristo

CLK: ti: add support for ti divider-clock

This patch adds support for TI divider clock binding, which simply uses
the basic clock divider to provide the features needed.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

show more ...

clk: ti: add composite clock support

This is a multipurpose clock node, which contains support for multiple
sub-clocks. Uses basic composite clock type to implement the actual
functionality, and TI

clk: ti: add composite clock support

This is a multipurpose clock node, which contains support for multiple
sub-clocks. Uses basic composite clock type to implement the actual
functionality, and TI specific gate, mux and divider clocks.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

show more ...

clk: ti: composite: fix memory leak

The parent_names is never released for a component clock definition,
causing some memory leak. Fix by releasing it once it is no longer
needed.

clk: ti: composite: fix memory leak

The parent_names is never released for a component clock definition,
causing some memory leak. Fix by releasing it once it is no longer
needed.

Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lkml.kernel.org/r/20200429131341.4697-2-t-kristo@ti.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: Convert to using %pOFn instead of device_node.name

In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

clk: Convert to using %pOFn instead of device_node.name

In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: ti: Drop legacy clk-3xxx-legacy code

We have now had omap3 booting in device tree only mode for a while
and all this code is unused.

Acked-by: Tero Kristo <t-kristo@ti.com>

clk: ti: Drop legacy clk-3xxx-legacy code

We have now had omap3 booting in device tree only mode for a while
and all this code is unused.

Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

show more ...

clk: ti: convert retry_init param to use void data type

User data should be void type, as the core framework doesn't need to
know what is passed through.

Signed-off-by: Tero Kri

clk: ti: convert retry_init param to use void data type

User data should be void type, as the core framework doesn't need to
know what is passed through.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: ti: enforce const types on string arrays

Constant string arrays should use const char * const instead of just
const char *. Change the implementations using these to proper type.

clk: ti: enforce const types on string arrays

Constant string arrays should use const char * const instead of just
const char *. Change the implementations using these to proper type.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>

show more ...

clk: ti: use automatic clock alias generation framework

Generate clock aliases automatically for all TI clock drivers.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Ton

clk: ti: use automatic clock alias generation framework

Generate clock aliases automatically for all TI clock drivers.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>

show more ...