|
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63 |
|
| #
13079557 |
| 25-Aug-2022 |
Wolfram Sang <wsa+renesas@sang-engineering.com> |
arm64: dts: renesas: r8a774a1: Put I2C aliases to board files
I2C aliases are not a property of a SoC. They belong to board files
where they are named accordingly in the schematics.
Signed-off-by:
arm64: dts: renesas: r8a774a1: Put I2C aliases to board files
I2C aliases are not a property of a SoC. They belong to board files
where they are named accordingly in the schematics.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220825071022.7864-7-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
|
Revision tags: v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39 |
|
| #
5cf12ac9 |
| 11-May-2022 |
Geert Uytterhoeven <geert+renesas@glider.be> |
arm64: dts: renesas: Rename numbered regulators
Numbered regulators are prone to conflicts, causing silent overwrites
(see e.g. [1]).
Make conflicts less likely to happen by renaming all numbered r
arm64: dts: renesas: Rename numbered regulators
Numbered regulators are prone to conflicts, causing silent overwrites
(see e.g. [1]).
Make conflicts less likely to happen by renaming all numbered regulators
to names reflecting the regulator's purposes.
[1] commit 45f5d5a9e34d3fe4 ("arm64: dts: renesas: r8a77995: draak: Fix
backlight regulator name").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b90dfeb834c4d7dabd22bf03396f33df58f54507.1652264651.git.geert+renesas@glider.be
show more ...
|
|
Revision tags: v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26 |
|
| #
48d8ee5b |
| 24-Feb-2022 |
Geert Uytterhoeven <geert+renesas@glider.be> |
arm64: dts: renesas: Align GPIO hog names with dtschema
Dtschema expects GPIO hogs to end with a "hog" suffix.
Also, the convention for node names is to use hyphens, not underscores.
Signed-off-by:
arm64: dts: renesas: Align GPIO hog names with dtschema
Dtschema expects GPIO hogs to end with a "hog" suffix.
Also, the convention for node names is to use hyphens, not underscores.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/baee4b9980576ffbab24122fce7147c9cbc2ea59.1645705998.git.geert+renesas@glider.be
show more ...
|
|
Revision tags: v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20 |
|
| #
d765a4f3 |
| 01-Mar-2021 |
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> |
arm64: dts: renesas: Add mmc aliases into board dts files
After the commit 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS
for drivers that existed in v4.14"), the order of /dev/mmcblkN
was not fi
arm64: dts: renesas: Add mmc aliases into board dts files
After the commit 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS
for drivers that existed in v4.14"), the order of /dev/mmcblkN
was not fixed in some SoCs which have multiple sdhi controllers.
So, we were hard to use an sdhi device as rootfs by using
the kernel parameter like "root=/dev/mmcblkNpM".
According to the discussion on a mainling list [1], we can add
mmc aliases to fix the issue. So, add such aliases into Renesas
arm64 board dts files. Notes that mmc0 is an eMMC channel if
available.
[1]
https://lore.kernel.org/linux-arm-kernel/CAPDyKFptyEQNJu8cqzMt2WRFZcwEdjDiytMBp96nkoZyprTgmA@mail.gmail.com/
Fixes: 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.14")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1614596786-22326-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
|
Revision tags: v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14 |
|
| #
d68c9edf |
| 19-Jan-2021 |
Wolfram Sang <wsa+renesas@sang-engineering.com> |
arm64: dts: renesas: Disable SD functions for plain eMMC
Some SDHI instances are solely used for eMMC. Disable SD and SDIO
for faster initialization.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-e
arm64: dts: renesas: Disable SD functions for plain eMMC
Some SDHI instances are solely used for eMMC. Disable SD and SDIO
for faster initialization.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Adam Ford <aford173@gmail.com> (beacon)
Link: https://lore.kernel.org/r/20210119133322.87289-1-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
| #
e6d95f35 |
| 01-Mar-2021 |
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> |
arm64: dts: renesas: Add mmc aliases into board dts files
[ Upstream commit d765a4f302cc046ca23453ba990d21120ceadbbd ]
After the commit 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS
for drivers
arm64: dts: renesas: Add mmc aliases into board dts files
[ Upstream commit d765a4f302cc046ca23453ba990d21120ceadbbd ]
After the commit 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS
for drivers that existed in v4.14"), the order of /dev/mmcblkN
was not fixed in some SoCs which have multiple sdhi controllers.
So, we were hard to use an sdhi device as rootfs by using
the kernel parameter like "root=/dev/mmcblkNpM".
According to the discussion on a mainling list [1], we can add
mmc aliases to fix the issue. So, add such aliases into Renesas
arm64 board dts files. Notes that mmc0 is an eMMC channel if
available.
[1]
https://lore.kernel.org/linux-arm-kernel/CAPDyKFptyEQNJu8cqzMt2WRFZcwEdjDiytMBp96nkoZyprTgmA@mail.gmail.com/
Fixes: 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.14")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1614596786-22326-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51 |
|
| #
deadcd50 |
| 08-Jul-2020 |
Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> |
arm64: dts: renesas: Add HiHope RZ/G2H main board support
Basic support for the HiHope RZ/G2H main board:
- Memory,
- Main crystal,
- Serial console
- eMMC
Signed-off-by: Marian-Cristian Ro
arm64: dts: renesas: Add HiHope RZ/G2H main board support
Basic support for the HiHope RZ/G2H main board:
- Memory,
- Main crystal,
- Serial console
- eMMC
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594230511-24790-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
|
Revision tags: v5.4.50, v5.7.7, v5.4.49, v5.7.6 |
|
| #
99167613 |
| 24-Jun-2020 |
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> |
arm64: dts: renesas: hihope-common: Separate out Rev.2.0 specific into hihope-rev2.dtsi file
Separate out Rev.2.0 specific hardware changes into hihope-rev2.dtsi
file so that hihope-common.dtsi can
arm64: dts: renesas: hihope-common: Separate out Rev.2.0 specific into hihope-rev2.dtsi file
Separate out Rev.2.0 specific hardware changes into hihope-rev2.dtsi
file so that hihope-common.dtsi can be used by all the variants for
RZ/G2M[N] boards.
LED node names have been updated according to Rev.4.0 schematics.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1593004330-5039-4-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
|
Revision tags: v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4 |
|
| #
36f06212 |
| 13-Dec-2019 |
Geert Uytterhoeven <geert+renesas@glider.be> |
arm64: dts: renesas: Group tuples in regulator-gpio states properties
To improve human readability and enable automatic validation, the tuples
in the "states" properties of device nodes compatible w
arm64: dts: renesas: Group tuples in regulator-gpio states properties
To improve human readability and enable automatic validation, the tuples
in the "states" properties of device nodes compatible with
"regulator-gpio" should be grouped, as reported by "make dtbs_check":
$ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dt.yaml: regulator-vccq-sdhi0: states:0: Additional items are not allowed (1800000, 0 were unexpected)
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dt.yaml: regulator-vccq-sdhi0: states:0: [3300000, 1, 1800000, 0] is too long
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dt.yaml: regulator-vccq-sdhi3: states:0: Additional items are not allowed (1800000, 0 were unexpected)
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dt.yaml: regulator-vccq-sdhi3: states:0: [3300000, 1, 1800000, 0] is too long
...
Fix this by grouping the tuples using angle brackets.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191213164115.3697-6-geert+renesas@glider.be
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
show more ...
|
|
Revision tags: v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3 |
|
| #
fbdcdb9c |
| 02-Oct-2019 |
Biju Das <biju.das@bp.renesas.com> |
arm64: dts: renesas: hihope-common: Move du clk properties out of common dtsi
RZ/G2N board is pin compatible with RZ/G2M board. However on the SoC
side RZ/G2N uses DU3 where as RZ/G2M uses DU2 for t
arm64: dts: renesas: hihope-common: Move du clk properties out of common dtsi
RZ/G2N board is pin compatible with RZ/G2M board. However on the SoC
side RZ/G2N uses DU3 where as RZ/G2M uses DU2 for the DPAD. In order to
reuse the common dtsi for both the boards, it is required to move du clock
properties from common dtsi to board specific dts.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/1570029619-43238-2-git-send-email-biju.das@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
| #
a3813258 |
| 04-Oct-2019 |
Biju Das <biju.das@bp.renesas.com> |
arm64: dts: renesas: r8a774a1: Remove audio port node
This patch removes audio port node from SoC device tree and
fixes the below dtb warning
Warning (unit_address_vs_reg): /soc/sound@ec500000/
arm64: dts: renesas: r8a774a1: Remove audio port node
This patch removes audio port node from SoC device tree and
fixes the below dtb warning
Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property
Fixes: e2f04248fcd4 ("arm64: dts: renesas: r8a774a1: Add audio support")
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Link: https://lore.kernel.org/r/1570200761-884-1-git-send-email-biju.das@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
|
Revision tags: v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12 |
|
| #
ae688e17 |
| 30-Aug-2019 |
Fabrizio Castro <fabrizio.castro@bp.renesas.com> |
arm64: dts: renesas: hihope-common: Fix eMMC status
SDHI3 got accidentally disabled while adding USB 2.0 support,
this patch fixes it.
Fixes: 734d277f412a ("arm64: dts: renesas: hihope-common: Add
arm64: dts: renesas: hihope-common: Fix eMMC status
SDHI3 got accidentally disabled while adding USB 2.0 support,
this patch fixes it.
Fixes: 734d277f412a ("arm64: dts: renesas: hihope-common: Add USB 2.0 support")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
|
Revision tags: v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2 |
|
| #
e77ad88d |
| 15-Jul-2019 |
Fabrizio Castro <fabrizio.castro@bp.renesas.com> |
arm64: dts: renesas: hihope-common: Add HDMI audio support
This patch adds support for HDMI audio to the device tree
common to the HiHope RZ/G2M and the HiHope RZ/G2N.
Signed-off-by: Fabrizio Castr
arm64: dts: renesas: hihope-common: Add HDMI audio support
This patch adds support for HDMI audio to the device tree
common to the HiHope RZ/G2M and the HiHope RZ/G2N.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
|
Revision tags: v5.2.1, v5.2 |
|
| #
176f936a |
| 05-Jul-2019 |
Biju Das <biju.das@bp.renesas.com> |
arm64: dts: renesas: hihope-common: Add WLAN support
This patch enables WLAN support for the HiHope RZ/G2[MN] boards.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterho
arm64: dts: renesas: hihope-common: Add WLAN support
This patch enables WLAN support for the HiHope RZ/G2[MN] boards.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
| #
d112c209 |
| 05-Jul-2019 |
Biju Das <biju.das@bp.renesas.com> |
arm64: dts: renesas: hihope-common: Add BT support
This patch enables BT support for the HiHope RZ/G2[MN] boards.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven
arm64: dts: renesas: hihope-common: Add BT support
This patch enables BT support for the HiHope RZ/G2[MN] boards.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
| #
cd3e43be |
| 05-Jul-2019 |
Biju Das <biju.das@bp.renesas.com> |
arm64: dts: renesas: hihope-common: Add PCA9654 I/O expander
Enable PCA9654 GPIO expander, so that we can configure its GPIOs later.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by:
arm64: dts: renesas: hihope-common: Add PCA9654 I/O expander
Enable PCA9654 GPIO expander, so that we can configure its GPIOs later.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
show more ...
|
|
Revision tags: v5.1.16, v5.1.15, v5.1.14, v5.1.13 |
|
| #
f6130381 |
| 19-Jun-2019 |
Fabrizio Castro <fabrizio.castro@bp.renesas.com> |
arm64: dts: renesas: hihope-common: Remove "label" from LEDs
Remove "label" properties from the LEDs device tree nodes, since
we don't have nice labels on the PCB.
Signed-off-by: Fabrizio Castro <f
arm64: dts: renesas: hihope-common: Remove "label" from LEDs
Remove "label" properties from the LEDs device tree nodes, since
we don't have nice labels on the PCB.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
|
Revision tags: v5.1.12 |
|
| #
89d6adc6 |
| 18-Jun-2019 |
Fabrizio Castro <fabrizio.castro@bp.renesas.com> |
arm64: dts: renesas: hihope-common: Add HDMI support
Add HDMI support to the HiHope RZ/G2[MN] mother board common
dtsi.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: Lau
arm64: dts: renesas: hihope-common: Add HDMI support
Add HDMI support to the HiHope RZ/G2[MN] mother board common
dtsi.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
|
Revision tags: v5.1.11, v5.1.10 |
|
| #
1485b635 |
| 14-Jun-2019 |
Fabrizio Castro <fabrizio.castro@bp.renesas.com> |
arm64: dts: renesas: hihope-common: Add LEDs support
This patch adds LEDs support to the HiHope RZ/G2[MN] Main Board
common device tree.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.c
arm64: dts: renesas: hihope-common: Add LEDs support
This patch adds LEDs support to the HiHope RZ/G2[MN] Main Board
common device tree.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
| #
3ba27637 |
| 14-Jun-2019 |
Biju Das <biju.das@bp.renesas.com> |
arm64: dts: renesas: hihope-common: Enable USB3.0
This patch enables USB3.0 host/peripheral device node for the HiHope
RZ/G2M board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by:
arm64: dts: renesas: hihope-common: Enable USB3.0
This patch enables USB3.0 host/peripheral device node for the HiHope
RZ/G2M board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
| #
734d277f |
| 11-Jun-2019 |
Fabrizio Castro <fabrizio.castro@bp.renesas.com> |
arm64: dts: renesas: hihope-common: Add USB 2.0 support
Add USB 2.0 support to the HiHope RZ/G2M.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+
arm64: dts: renesas: hihope-common: Add USB 2.0 support
Add USB 2.0 support to the HiHope RZ/G2M.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
|
Revision tags: v5.1.9, v5.1.8 |
|
| #
015a7507 |
| 07-Jun-2019 |
Fabrizio Castro <fabrizio.castro@bp.renesas.com> |
arm64: dts: renesas: hihope-common: Add uSD and eMMC
This patch adds uSD and eMMC support to the HiHope RZ/G2M
board.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Ge
arm64: dts: renesas: hihope-common: Add uSD and eMMC
This patch adds uSD and eMMC support to the HiHope RZ/G2M
board.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
| #
736a291d |
| 11-Jun-2019 |
Biju Das <biju.das@bp.renesas.com> |
arm64: dts: renesas: hihope-common: Add RWDT support
Enable RWDT and use 60 seconds as default timeout.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+rene
arm64: dts: renesas: hihope-common: Add RWDT support
Enable RWDT and use 60 seconds as default timeout.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
| #
61e0505b |
| 07-Jun-2019 |
Biju Das <biju.das@bp.renesas.com> |
arm64: dts: renesas: hihope-common: Declare pcie bus clock
Declare pcie bus clock, since it is generated on the HiHope RZ/G2M main
board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-
arm64: dts: renesas: hihope-common: Declare pcie bus clock
Declare pcie bus clock, since it is generated on the HiHope RZ/G2M main
board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|
|
Revision tags: v5.1.7, v5.1.6 |
|
| #
7433f1fb |
| 30-May-2019 |
Biju Das <biju.das@bp.renesas.com> |
arm64: dts: renesas: Add HiHope RZ/G2M sub board support
The HiHope RZ/G2M sub board sits below the HiHope RZ/G2M main board.
This patch also adds ethernet support along with a dtsi common to
both H
arm64: dts: renesas: Add HiHope RZ/G2M sub board support
The HiHope RZ/G2M sub board sits below the HiHope RZ/G2M main board.
This patch also adds ethernet support along with a dtsi common to
both HiHope RZ/G2M and RZ/G2N sub boards.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
show more ...
|