Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31 |
|
#
f5402fff |
| 28-May-2023 |
Adam Ford <aford173@gmail.com> |
arm64: dts: imx8mn-beacon: Migrate sound card to simple-audio-card
Instead of using a custom glue layer connecting the wm8962 CODEC to the SAI3 sound-dai, migrate the sound card to simple-audio-card
arm64: dts: imx8mn-beacon: Migrate sound card to simple-audio-card
Instead of using a custom glue layer connecting the wm8962 CODEC to the SAI3 sound-dai, migrate the sound card to simple-audio-card.
Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
#
9bf2e534 |
| 28-May-2023 |
Adam Ford <aford173@gmail.com> |
arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
The final production baseboard had a different chip select than earlier prototype boards. When the newer board was released, the SPI stopped working bec
arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
The final production baseboard had a different chip select than earlier prototype boards. When the newer board was released, the SPI stopped working because the wrong pin was used in the device tree and conflicted with the UART RTS. Fix the pinmux for production boards.
Fixes: 36ca3c8ccb53 ("arm64: dts: imx: Add Beacon i.MX8M Nano development kit") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v6.1.30, v6.1.29, v6.1.28 |
|
#
6bc3ea47 |
| 07-May-2023 |
Adam Ford <aford173@gmail.com> |
arm64: dts: imx8mn-beacon: Add support for OV5640 Camera
The baseboard has a very specific pinout for the TD Next 5640 camera which uses an OV5640 sensor. Enable it as part of the deveopment kit ba
arm64: dts: imx8mn-beacon: Add support for OV5640 Camera
The baseboard has a very specific pinout for the TD Next 5640 camera which uses an OV5640 sensor. Enable it as part of the deveopment kit baseboard instead of an overlay.
Enable the camera with the following media-ctl -l "'ov5640 1-0010':0 -> 'csis-32e30000.mipi-csi':0 [1]" media-ctl -v -V "'ov5640 1-0010':0 [fmt:UYVY8_1X16/640x480 field:none]" media-ctl -v -V "'crossbar':0 [fmt:UYVY8_1X16/640x480 field:none]" media-ctl -v -V "'mxc_isi.0':0 [fmt:UYVY8_1X16/640x480 field:none]"
Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44 |
|
#
33597c62 |
| 26-May-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: fsl: adjust whitespace around '='
Fix whitespace coding style: use single space instead of tabs or multiple spaces around '=' sign in property assignment. No functional changes (same DT
arm64: dts: fsl: adjust whitespace around '='
Fix whitespace coding style: use single space instead of tabs or multiple spaces around '=' sign in property assignment. No functional changes (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36 |
|
#
5446ff1a |
| 26-Apr-2022 |
Adam Ford <aford173@gmail.com> |
arm64: dts: imx8mn-beacon: Enable RTS-CTS on UART3
There is a header for a DB9 serial port, but any attempts to use hardware handshaking fail. Enable RTS and CTS pin muxing and enable handshaking i
arm64: dts: imx8mn-beacon: Enable RTS-CTS on UART3
There is a header for a DB9 serial port, but any attempts to use hardware handshaking fail. Enable RTS and CTS pin muxing and enable handshaking in the uart node.
Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
Revision tags: v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14 |
|
#
38c0b949 |
| 18-Oct-2021 |
Geert Uytterhoeven <geert+renesas@glider.be> |
arm64: dts: imx: imx8mn-beacon: Drop undocumented clock-names reference
The wlf,wm8962 Device Tree bindings do not specify a clock-names property. Drop it.
Signed-off-by: Geert Uytterhoeven <geert
arm64: dts: imx: imx8mn-beacon: Drop undocumented clock-names reference
The wlf,wm8962 Device Tree bindings do not specify a clock-names property. Drop it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|
#
9cada4a0 |
| 26-Apr-2022 |
Adam Ford <aford173@gmail.com> |
arm64: dts: imx8mn-beacon: Enable RTS-CTS on UART3
commit 5446ff1a67160ad92d9aae9530846aa54750be36 upstream.
There is a header for a DB9 serial port, but any attempts to use hardware handshaking fa
arm64: dts: imx8mn-beacon: Enable RTS-CTS on UART3
commit 5446ff1a67160ad92d9aae9530846aa54750be36 upstream.
There is a header for a DB9 serial port, but any attempts to use hardware handshaking fail. Enable RTS and CTS pin muxing and enable handshaking in the uart node.
Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
9cada4a0 |
| 26-Apr-2022 |
Adam Ford <aford173@gmail.com> |
arm64: dts: imx8mn-beacon: Enable RTS-CTS on UART3
commit 5446ff1a67160ad92d9aae9530846aa54750be36 upstream.
There is a header for a DB9 serial port, but any attempts to use hardware handshaking fa
arm64: dts: imx8mn-beacon: Enable RTS-CTS on UART3
commit 5446ff1a67160ad92d9aae9530846aa54750be36 upstream.
There is a header for a DB9 serial port, but any attempts to use hardware handshaking fail. Enable RTS and CTS pin muxing and enable handshaking in the uart node.
Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10 |
|
#
36ca3c8c |
| 07-Nov-2020 |
Adam Ford <aford173@gmail.com> |
arm64: dts: imx: Add Beacon i.MX8M Nano development kit
Beacon Embeddedworks is launching a development kit based on the i.MX8M Nano SoC. The kit consists of a System on Module (SOM) + baseboard.
arm64: dts: imx: Add Beacon i.MX8M Nano development kit
Beacon Embeddedworks is launching a development kit based on the i.MX8M Nano SoC. The kit consists of a System on Module (SOM) + baseboard. The SOM has the SoC, eMMC, and Ethernet. The baseboard has an wm8962 audio CODEC, a PDM microphone, and a single USB OTG.
The baseboard is capable of two different, mutually exclusive video outputs, so the common items are in the baseboard file. When the video becomes available, LVDS output will be added to this kit file, and a second kit file will be added to support HDMI.
Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|