dt-bindings: Remove 'Device Tree Bindings' from end of title:

As indicated in
link: https://lore.kernel.org/all/20220822204945.GA808626-robh@kernel.org/

DT schema files should not have 'Device Tree

dt-bindings: Remove 'Device Tree Bindings' from end of title:

As indicated in
link: https://lore.kernel.org/all/20220822204945.GA808626-robh@kernel.org/

DT schema files should not have 'Device Tree Binding' as part of there
title: line. Remove this in most .yaml files, so hopefully preventing
developers copying it into new .yaml files, and being asked to remove
it.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220825020427.3460650-1-andrew@lunn.ch
Signed-off-by: Rob Herring <robh@kernel.org>

show more ...

dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators

Add bindings for Brcmstb EP voltage regulators. A new mechanism is to be
added to the Linux PCI subsystem that will allocate and tur

dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators

Add bindings for Brcmstb EP voltage regulators. A new mechanism is to be
added to the Linux PCI subsystem that will allocate and turn on/off
regulators. These are standard regulators -- vpcie12v, vpcie3v3, and
vpcie3v3aux -- placed in the DT in the bridge node under the host bridge
device.

The use of a regulator property in the PCIe EP subnode such as
"vpcie12v-supply" depends on a pending pullreq to the pci-bus.yaml
file at

https://github.com/devicetree-org/dt-schema/pull/63

Link: https://lore.kernel.org/r/20220106160332.2143-4-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map.

The "pcie" and "msi" interrupts were given the same interrupt when they are
actually different. Interrupt-map only had the INTA entry; a

dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map.

The "pcie" and "msi" interrupts were given the same interrupt when they are
actually different. Interrupt-map only had the INTA entry; add the INTB,
INTC, and INTD entries.

Link: https://lore.kernel.org/r/20220106160332.2143-3-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>

show more ...

dt-bindings: PCI: Add compatible string for Brcmstb 74[23]5 MIPs SOCs

The Broadcom STB Arm and MIPs SOCs use the same PCIe controller
HW, although the MIPs version is older.

Signed-off-by: Jim Quin

dt-bindings: PCI: Add compatible string for Brcmstb 74[23]5 MIPs SOCs

The Broadcom STB Arm and MIPs SOCs use the same PCIe controller
HW, although the MIPs version is older.

Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

show more ...

dt-bindings: PCI: brcmstb: compatible is required

The compatible property is required, make sure the binding documents it
as such.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https

dt-bindings: PCI: brcmstb: compatible is required

The compatible property is required, make sure the binding documents it
as such.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211202223609.1171452-1-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

show more ...

dt-bindings: interrupt-controller: Convert MSI controller to json-schema

Split the MSI controller bindings from the MSI binding document
into DT schema format using json-schema.

Acked-by: Marc Zyng

dt-bindings: interrupt-controller: Convert MSI controller to json-schema

Split the MSI controller bindings from the MSI binding document
into DT schema format using json-schema.

Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Link: https://lore.kernel.org/r/20210921183420.436-2-kettenis@openbsd.org
Signed-off-by: Rob Herring <robh@kernel.org>

show more ...

dt-bindings: Drop redundant minItems/maxItems

If a property has an 'items' list, then a 'minItems' or 'maxItems' with the
same size as the list is redundant and can be dropped. Note that is DT
schem

dt-bindings: Drop redundant minItems/maxItems

If a property has an 'items' list, then a 'minItems' or 'maxItems' with the
same size as the list is redundant and can be dropped. Note that is DT
schema specific behavior and not standard json-schema behavior. The tooling
will fixup the final schema adding any unspecified minItems/maxItems.

This condition is partially checked with the meta-schema already, but
only if both 'minItems' and 'maxItems' are equal to the 'items' length.
An improved meta-schema is pending.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for MMC
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210615191543.1043414-1-robh@kernel.org

show more ...

dt-bindings: PCI: brcmstb: add BCM4908 binding

BCM4908 is a SoC family with PCIe controller sharing design with the one
for STB. BCM4908 has different power management and memory controller so
few t

dt-bindings: PCI: brcmstb: add BCM4908 binding

BCM4908 is a SoC family with PCIe controller sharing design with the one
for STB. BCM4908 has different power management and memory controller so
few tweaks are required.

PERST# signal on BCM4908 is handled by an external MISC block so it
needs specifying a reset phandle.

Link: https://lore.kernel.org/r/20201210180421.7230-2-zajec5@gmail.com
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

dt-bindings: PCI: Add bindings for more Brcmstb chips

- Add compatible strings for three more Broadcom STB chips: 7278, 7216,
7211 (STB version of RPi4).
- Add new property 'brcm,scb-sizes'.
- Add

dt-bindings: PCI: Add bindings for more Brcmstb chips

- Add compatible strings for three more Broadcom STB chips: 7278, 7216,
7211 (STB version of RPi4).
- Add new property 'brcm,scb-sizes'.
- Add new property 'resets'.
- Add new property 'reset-names' for 7216 only.
- Allow 'ranges' and 'dma-ranges' to have more than one item and update
the example to show this.

Link: https://lore.kernel.org/r/20200911175232.19016-3-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>

show more ...

dt-bindings: PCI: brcmstb: New prop 'aspm-no-l0s'

For various reasons, one may want to disable the ASPM L0s
capability.

Link: https://lore.kernel.org/r/20200507201544.43432-4-james.quinlan@broadcom

dt-bindings: PCI: brcmstb: New prop 'aspm-no-l0s'

For various reasons, one may want to disable the ASPM L0s
capability.

Link: https://lore.kernel.org/r/20200507201544.43432-4-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>

show more ...

dt-bindings: PCI: Add bindings for brcmstb's PCIe device

The DT bindings description of the brcmstb PCIe device is described.
This node can only be used for now on the Raspberry Pi 4.

Signed-off-by

dt-bindings: PCI: Add bindings for brcmstb's PCIe device

The DT bindings description of the brcmstb PCIe device is described.
This node can only be used for now on the Raspberry Pi 4.

Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>

show more ...

dt-bindings: PCI: Add bindings for more Brcmstb chips

- Add compatible strings for three more Broadcom STB chips: 7278, 7216,
7211 (STB version of RPi4).
- Add new property 'brcm,s

dt-bindings: PCI: Add bindings for more Brcmstb chips

- Add compatible strings for three more Broadcom STB chips: 7278, 7216,
7211 (STB version of RPi4).
- Add new property 'brcm,scb-sizes'.
- Add new property 'resets'.
- Add new property 'reset-names' for 7216 only.
- Allow 'ranges' and 'dma-ranges' to have more than one item and update
the example to show this.

Link: https://lore.kernel.org/r/20200911175232.19016-3-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>

show more ...

dt-bindings: PCI: brcmstb: New prop 'aspm-no-l0s'

For various reasons, one may want to disable the ASPM L0s
capability.

Link: https://lore.kernel.org/r/20200507201544.43432-4-ja

dt-bindings: PCI: brcmstb: New prop 'aspm-no-l0s'

For various reasons, one may want to disable the ASPM L0s
capability.

Link: https://lore.kernel.org/r/20200507201544.43432-4-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>

show more ...

dt-bindings: PCI: Add bindings for brcmstb's PCIe device

The DT bindings description of the brcmstb PCIe device is described.
This node can only be used for now on the Raspberry Pi 4.

dt-bindings: PCI: Add bindings for brcmstb's PCIe device

The DT bindings description of the brcmstb PCIe device is described.
This node can only be used for now on the Raspberry Pi 4.

Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>

show more ...