1 #ifndef __SERIAL_H__ 2 #define __SERIAL_H__ 3 4 #include <post.h> 5 6 struct serial_device { 7 /* enough bytes to match alignment of following func pointer */ 8 char name[16]; 9 10 int (*start)(void); 11 int (*stop)(void); 12 void (*setbrg)(void); 13 int (*getc)(void); 14 int (*tstc)(void); 15 void (*putc)(const char c); 16 void (*puts)(const char *s); 17 #if CONFIG_POST & CONFIG_SYS_POST_UART 18 void (*loop)(int); 19 #endif 20 struct serial_device *next; 21 }; 22 23 void default_serial_puts(const char *s); 24 25 extern struct serial_device serial_smc_device; 26 extern struct serial_device serial_scc_device; 27 extern struct serial_device *default_serial_console(void); 28 29 #if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \ 30 defined(CONFIG_MPC86xx) || \ 31 defined(CONFIG_TEGRA) || defined(CONFIG_SYS_COREBOOT) || \ 32 defined(CONFIG_MICROBLAZE) 33 extern struct serial_device serial0_device; 34 extern struct serial_device serial1_device; 35 #endif 36 37 extern struct serial_device eserial1_device; 38 extern struct serial_device eserial2_device; 39 extern struct serial_device eserial3_device; 40 extern struct serial_device eserial4_device; 41 extern struct serial_device eserial5_device; 42 extern struct serial_device eserial6_device; 43 44 extern void serial_register(struct serial_device *); 45 extern void serial_initialize(void); 46 extern void serial_stdio_init(void); 47 extern int serial_assign(const char *name); 48 extern void serial_reinit_all(void); 49 50 /* For usbtty */ 51 #ifdef CONFIG_USB_TTY 52 53 extern int usbtty_getc(void); 54 extern void usbtty_putc(const char c); 55 extern void usbtty_puts(const char *str); 56 extern int usbtty_tstc(void); 57 58 #else 59 60 /* stubs */ 61 #define usbtty_getc() 0 62 #define usbtty_putc(a) 63 #define usbtty_puts(a) 64 #define usbtty_tstc() 0 65 66 #endif /* CONFIG_USB_TTY */ 67 68 struct udevice; 69 70 enum serial_par { 71 SERIAL_PAR_NONE, 72 SERIAL_PAR_ODD, 73 SERIAL_PAR_EVEN 74 }; 75 76 #define SERIAL_PAR_SHIFT 0 77 #define SERIAL_PAR_MASK (0x03 << SERIAL_PAR_SHIFT) 78 #define SERIAL_SET_PARITY(parity) \ 79 ((parity << SERIAL_PAR_SHIFT) & SERIAL_PAR_MASK) 80 #define SERIAL_GET_PARITY(config) \ 81 ((config & SERIAL_PAR_MASK) >> SERIAL_PAR_SHIFT) 82 83 enum serial_bits { 84 SERIAL_5_BITS, 85 SERIAL_6_BITS, 86 SERIAL_7_BITS, 87 SERIAL_8_BITS 88 }; 89 90 #define SERIAL_BITS_SHIFT 2 91 #define SERIAL_BITS_MASK (0x3 << SERIAL_BITS_SHIFT) 92 #define SERIAL_SET_BITS(bits) \ 93 ((bits << SERIAL_BITS_SHIFT) & SERIAL_BITS_MASK) 94 #define SERIAL_GET_BITS(config) \ 95 ((config & SERIAL_BITS_MASK) >> SERIAL_BITS_SHIFT) 96 97 enum serial_stop { 98 SERIAL_HALF_STOP, /* 0.5 stop bit */ 99 SERIAL_ONE_STOP, /* 1 stop bit */ 100 SERIAL_ONE_HALF_STOP, /* 1.5 stop bit */ 101 SERIAL_TWO_STOP /* 2 stop bit */ 102 }; 103 104 #define SERIAL_STOP_SHIFT 4 105 #define SERIAL_STOP_MASK (0x3 << SERIAL_STOP_SHIFT) 106 #define SERIAL_SET_STOP(stop) \ 107 ((stop << SERIAL_STOP_SHIFT) & SERIAL_STOP_MASK) 108 #define SERIAL_GET_STOP(config) \ 109 ((config & SERIAL_STOP_MASK) >> SERIAL_STOP_SHIFT) 110 111 #define SERIAL_CONFIG(par, bits, stop) \ 112 (par << SERIAL_PAR_SHIFT | \ 113 bits << SERIAL_BITS_SHIFT | \ 114 stop << SERIAL_STOP_SHIFT) 115 116 #define SERIAL_DEFAULT_CONFIG \ 117 (SERIAL_PAR_NONE << SERIAL_PAR_SHIFT | \ 118 SERIAL_8_BITS << SERIAL_BITS_SHIFT | \ 119 SERIAL_ONE_STOP << SERIAL_STOP_SHIFT) 120 121 enum serial_chip_type { 122 SERIAL_CHIP_UNKNOWN = -1, 123 SERIAL_CHIP_16550_COMPATIBLE, 124 }; 125 126 enum adr_space_type { 127 SERIAL_ADDRESS_SPACE_MEMORY = 0, 128 SERIAL_ADDRESS_SPACE_IO, 129 }; 130 131 /** 132 * struct serial_device_info - structure to hold serial device info 133 * 134 * @type: type of the UART chip 135 * @addr_space: address space to access the registers 136 * @addr: physical address of the registers 137 * @reg_width: size (in bytes) of the IO accesses to the registers 138 * @reg_offset: offset to apply to the @addr from the start of the registers 139 * @reg_shift: quantity to shift the register offsets by 140 * @baudrate: baud rate 141 */ 142 struct serial_device_info { 143 enum serial_chip_type type; 144 enum adr_space_type addr_space; 145 ulong addr; 146 u8 reg_width; 147 u8 reg_offset; 148 u8 reg_shift; 149 unsigned int baudrate; 150 }; 151 152 #define SERIAL_DEFAULT_ADDRESS 0xBADACCE5 153 154 /** 155 * struct struct dm_serial_ops - Driver model serial operations 156 * 157 * The uclass interface is implemented by all serial devices which use 158 * driver model. 159 */ 160 struct dm_serial_ops { 161 /** 162 * setbrg() - Set up the baud rate generator 163 * 164 * Adjust baud rate divisors to set up a new baud rate for this 165 * device. Not all devices will support all rates. If the rate 166 * cannot be supported, the driver is free to select the nearest 167 * available rate. or return -EINVAL if this is not possible. 168 * 169 * @dev: Device pointer 170 * @baudrate: New baud rate to use 171 * @return 0 if OK, -ve on error 172 */ 173 int (*setbrg)(struct udevice *dev, int baudrate); 174 /** 175 * getc() - Read a character and return it 176 * 177 * If no character is available, this should return -EAGAIN without 178 * waiting. 179 * 180 * @dev: Device pointer 181 * @return character (0..255), -ve on error 182 */ 183 int (*getc)(struct udevice *dev); 184 /** 185 * putc() - Write a character 186 * 187 * @dev: Device pointer 188 * @ch: character to write 189 * @return 0 if OK, -ve on error 190 */ 191 int (*putc)(struct udevice *dev, const char ch); 192 /** 193 * pending() - Check if input/output characters are waiting 194 * 195 * This can be used to return an indication of the number of waiting 196 * characters if the driver knows this (e.g. by looking at the FIFO 197 * level). It is acceptable to return 1 if an indeterminant number 198 * of characters is waiting. 199 * 200 * This method is optional. 201 * 202 * @dev: Device pointer 203 * @input: true to check input characters, false for output 204 * @return number of waiting characters, 0 for none, -ve on error 205 */ 206 int (*pending)(struct udevice *dev, bool input); 207 /** 208 * clear() - Clear the serial FIFOs/holding registers 209 * 210 * This method is optional. 211 * 212 * This quickly clears any input/output characters from the UART. 213 * If this is not possible, but characters still exist, then it 214 * is acceptable to return -EAGAIN (try again) or -EINVAL (not 215 * supported). 216 * 217 * @dev: Device pointer 218 * @return 0 if OK, -ve on error 219 */ 220 int (*clear)(struct udevice *dev); 221 #if CONFIG_POST & CONFIG_SYS_POST_UART 222 /** 223 * loop() - Control serial device loopback mode 224 * 225 * @dev: Device pointer 226 * @on: 1 to turn loopback on, 0 to turn if off 227 */ 228 int (*loop)(struct udevice *dev, int on); 229 #endif 230 231 /** 232 * getconfig() - Get the uart configuration 233 * (parity, 5/6/7/8 bits word length, stop bits) 234 * 235 * Get a current config for this device. 236 * 237 * @dev: Device pointer 238 * @parity: parity to use 239 * @bits: bits number to use 240 * @stop: stop bits number to use 241 * @return 0 if OK, -ve on error 242 */ 243 int (*getconfig)(struct udevice *dev, uint *serial_config); 244 /** 245 * setconfig() - Set up the uart configuration 246 * (parity, 5/6/7/8 bits word length, stop bits) 247 * 248 * Set up a new config for this device. 249 * 250 * @dev: Device pointer 251 * @serial_config: number of bits, parity and number of stopbits to use 252 * @return 0 if OK, -ve on error 253 */ 254 int (*setconfig)(struct udevice *dev, uint serial_config); 255 /** 256 * getinfo() - Get serial device information 257 * 258 * @dev: Device pointer 259 * @info: struct serial_device_info to fill 260 */ 261 int (*getinfo)(struct udevice *dev, struct serial_device_info *info); 262 }; 263 264 /** 265 * struct serial_dev_priv - information about a device used by the uclass 266 * 267 * @sdev: stdio device attached to this uart 268 * 269 * @buf: Pointer to the RX buffer 270 * @rd_ptr: Read pointer in the RX buffer 271 * @wr_ptr: Write pointer in the RX buffer 272 */ 273 struct serial_dev_priv { 274 struct stdio_dev *sdev; 275 276 char *buf; 277 int rd_ptr; 278 int wr_ptr; 279 }; 280 281 /* Access the serial operations for a device */ 282 #define serial_get_ops(dev) ((struct dm_serial_ops *)(dev)->driver->ops) 283 284 void atmel_serial_initialize(void); 285 void mcf_serial_initialize(void); 286 void mpc85xx_serial_initialize(void); 287 void mxc_serial_initialize(void); 288 void ns16550_serial_initialize(void); 289 void pl01x_serial_initialize(void); 290 void pxa_serial_initialize(void); 291 void sh_serial_initialize(void); 292 293 #endif 294