1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2018 Toradex AG 4 * 5 * Configuration settings for the Colibri iMX6ULL module. 6 * 7 * based on colibri_imx7.h 8 */ 9 10 #ifndef __COLIBRI_IMX6ULL_CONFIG_H 11 #define __COLIBRI_IMX6ULL_CONFIG_H 12 13 #include "mx6_common.h" 14 #define CONFIG_IOMUX_LPSR 15 16 /* #define CONFIG_DBG_MONITOR*/ 17 #define PHYS_SDRAM_SIZE SZ_512M 18 19 /* Size of malloc() pool */ 20 #define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) 21 22 /* Network */ 23 #define CONFIG_MII 24 #define CONFIG_FEC_XCV_TYPE RMII 25 #define CONFIG_ETHPRIME "FEC" 26 #define CONFIG_FEC_MXC_PHYADDR 0 27 28 #define CONFIG_IP_DEFRAG 29 #define CONFIG_TFTP_BLOCKSIZE 16352 30 #define CONFIG_TFTP_TSIZE 31 32 /* ENET1 */ 33 #define IMX_FEC_BASE ENET2_BASE_ADDR 34 35 /* MMC Config*/ 36 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 37 #define CONFIG_SYS_FSL_USDHC_NUM 1 38 39 #undef CONFIG_BOOTM_PLAN9 40 #undef CONFIG_BOOTM_RTEMS 41 42 /* I2C configs */ 43 #define CONFIG_SYS_I2C_SPEED 100000 44 45 #define CONFIG_IPADDR 192.168.10.2 46 #define CONFIG_NETMASK 255.255.255.0 47 #define CONFIG_SERVERIP 192.168.10.1 48 49 #define FDT_FILE "imx6ull-colibri${variant}-${fdt_board}.dtb" 50 51 #define MEM_LAYOUT_ENV_SETTINGS \ 52 "bootm_size=0x10000000\0" \ 53 "fdt_addr_r=0x82000000\0" \ 54 "fdt_high=0xffffffff\0" \ 55 "initrd_high=0xffffffff\0" \ 56 "kernel_addr_r=0x81000000\0" \ 57 "pxefile_addr_r=0x87100000\0" \ 58 "ramdisk_addr_r=0x82100000\0" \ 59 "scriptaddr=0x87000000\0" 60 61 #define NFS_BOOTCMD \ 62 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ 63 "nfsboot=run setup; " \ 64 "setenv bootargs ${defargs} ${nfsargs} " \ 65 "${setupargs} ${vidargs}; echo Booting from NFS...;" \ 66 "dhcp ${kernel_addr_r} && " \ 67 "tftp ${fdt_addr_r} " FDT_FILE " && " \ 68 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 69 70 #define SD_BOOTCMD \ 71 "sdargs=root=/dev/mmcblk0p2 ro rootwait\0" \ 72 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \ 73 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \ 74 "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \ 75 "load mmc 0:1 ${fdt_addr_r} " FDT_FILE " && " \ 76 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 77 78 #define UBI_BOOTCMD \ 79 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \ 80 "ubi.fm_autoconvert=1\0" \ 81 "ubiboot=run setup; " \ 82 "setenv bootargs ${defargs} ${ubiargs} " \ 83 "${setupargs} ${vidargs}; echo Booting from NAND...; " \ 84 "ubi part ubi &&" \ 85 "ubi read ${kernel_addr_r} kernel && " \ 86 "ubi read ${fdt_addr_r} dtb && " \ 87 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 88 89 #define CONFIG_BOOTCOMMAND "run ubiboot; " \ 90 "setenv fdtfile " FDT_FILE " && run distro_bootcmd;" 91 92 #define BOOT_TARGET_DEVICES(func) \ 93 func(MMC, mmc, 0) \ 94 func(USB, usb, 0) \ 95 func(DHCP, dhcp, na) 96 #include <config_distro_bootcmd.h> 97 98 #define DFU_ALT_NAND_INFO "imx6ull-bcb part 0,1;u-boot1 part 0,2;u-boot2 part 0,3;u-boot-env part 0,4;ubi partubi 0,5" 99 100 #define CONFIG_EXTRA_ENV_SETTINGS \ 101 BOOTENV \ 102 MEM_LAYOUT_ENV_SETTINGS \ 103 NFS_BOOTCMD \ 104 SD_BOOTCMD \ 105 UBI_BOOTCMD \ 106 "console=ttymxc0\0" \ 107 "defargs=user_debug=30\0" \ 108 "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \ 109 "fdt_board=eval-v3\0" \ 110 "fdt_fixup=;\0" \ 111 "ip_dyn=yes\0" \ 112 "kernel_file=zImage\0" \ 113 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ 114 "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ 115 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ 116 "${board}/flash_eth.img && source ${loadaddr}\0" \ 117 "setsdupdate=mmc rescan && setenv interface mmc && " \ 118 "fatload ${interface} 0:1 ${loadaddr} " \ 119 "${board}/flash_blk.img && source ${loadaddr}\0" \ 120 "setup=setenv setupargs " \ 121 "console=tty1 console=${console}" \ 122 ",${baudrate}n8 ${memargs} consoleblank=0\0" \ 123 "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \ 124 "setusbupdate=usb start && setenv interface usb && " \ 125 "fatload ${interface} 0:1 ${loadaddr} " \ 126 "${board}/flash_blk.img && source ${loadaddr}\0" \ 127 "splashpos=m,m\0" \ 128 "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \ 129 "vidargs=video=mxsfb:640x480-16@60" 130 131 #define CONFIG_SYS_MEMTEST_START 0x80000000 132 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x08000000) 133 134 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 135 136 /* Physical Memory Map */ 137 #define CONFIG_NR_DRAM_BANKS 1 138 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 139 140 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 141 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 142 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 143 144 #define CONFIG_SYS_INIT_SP_OFFSET \ 145 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 146 #define CONFIG_SYS_INIT_SP_ADDR \ 147 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 148 149 #if defined(CONFIG_ENV_IS_IN_NAND) 150 #define CONFIG_ENV_SECT_SIZE (128 * 1024) 151 #define CONFIG_ENV_OFFSET (28 * CONFIG_ENV_SECT_SIZE) 152 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 153 #endif 154 155 /* NAND stuff */ 156 #define CONFIG_SYS_MAX_NAND_DEVICE 1 157 /* used to initialize CONFIG_SYS_NAND_BASE_LIST which is unused */ 158 #define CONFIG_SYS_NAND_BASE -1 159 #define CONFIG_SYS_NAND_ONFI_DETECTION 160 #define CONFIG_SYS_NAND_USE_FLASH_BBT 161 162 /* USB Configs */ 163 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 164 165 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 166 #define CONFIG_MXC_USB_FLAGS 0 167 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 168 169 #define CONFIG_IMX_THERMAL 170 171 #define CONFIG_USBD_HS 172 173 /* USB Device Firmware Update support */ 174 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M 175 #define DFU_DEFAULT_POLL_TIMEOUT 300 176 177 #ifdef CONFIG_VIDEO 178 #define CONFIG_VIDEO_MXS 179 #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR 180 #define CONFIG_VIDEO_LOGO 181 #define CONFIG_SPLASH_SCREEN 182 #define CONFIG_SPLASH_SCREEN_ALIGN 183 #define CONFIG_BMP_16BPP 184 #define CONFIG_VIDEO_BMP_RLE8 185 #define CONFIG_VIDEO_BMP_LOGO 186 #endif 187 188 #endif 189