1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2015
4  * (C) Copyright 2014
5  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
6  *
7  * Based on:
8  * Copyright (C) 2012 Freescale Semiconductor, Inc.
9  *
10  * Configuration settings for the Freescale i.MX6Q SabreSD board.
11  */
12 #ifndef __ARISTAINETOS_COMMON_CONFIG_H
13 #define __ARISTAINETOS_COMMON_CONFIG_H
14 
15 #include "mx6_common.h"
16 
17 #define CONFIG_MACH_TYPE	4501
18 #define CONFIG_MMCROOT		"/dev/mmcblk0p1"
19 
20 /* Size of malloc() pool */
21 #define CONFIG_SYS_MALLOC_LEN		(64 * SZ_1M)
22 
23 #define CONFIG_MXC_UART
24 
25 /* MMC Configs */
26 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
27 
28 #define CONFIG_FEC_MXC
29 #define CONFIG_MII
30 #define IMX_FEC_BASE			ENET_BASE_ADDR
31 #define CONFIG_ETHPRIME			"FEC"
32 #define CONFIG_FEC_MXC_PHYADDR		0
33 
34 #define CONFIG_SPI_FLASH_MTD
35 #define CONFIG_SF_DEFAULT_SPEED		20000000
36 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
37 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
38 
39 #define CONFIG_EXTRA_ENV_SETTINGS \
40 	"script=u-boot.scr\0" \
41 	"fit_file=/boot/system.itb\0" \
42 	"loadaddr=0x12000000\0" \
43 	"fit_addr_r=0x14000000\0" \
44 	"uboot=/boot/u-boot.imx\0" \
45 	"uboot_sz=d0000\0" \
46 	"rescue_sys_addr=f0000\0" \
47 	"rescue_sys_length=f10000\0" \
48 	"panel=lb07wv8\0" \
49 	"splashpos=m,m\0" \
50 	"console=" CONSOLE_DEV "\0" \
51 	"fdt_high=0xffffffff\0"	  \
52 	"initrd_high=0xffffffff\0" \
53 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
54 	"set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
55 		"default ${board_type}\0" \
56 	"get_env=mw ${loadaddr} 0 0x20000;" \
57 		"mmc rescan;" \
58 		"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
59 		"env import -t ${loadaddr}\0" \
60 	"default_env=mw ${loadaddr} 0 0x20000;" \
61 		"env export -t ${loadaddr} serial# ethaddr eth1addr " \
62 		"board_type panel;" \
63 		"env default -a;" \
64 		"env import -t ${loadaddr}\0" \
65 	"loadbootscript=" \
66 		"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
67 	"bootscript=echo Running bootscript from mmc ...; " \
68 		"source\0" \
69 	"mmcpart=1\0" \
70 	"mmcdev=0\0" \
71 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
72 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
73 		"root=${mmcroot}\0" \
74 	"mmcboot=echo Booting from mmc ...; " \
75 		"run mmcargs addmtd addmisc set_fit_default;" \
76 		"bootm ${fit_addr_r}\0" \
77 	"mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
78 		"${fit_file}\0" \
79 	"mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
80 		"${uboot}\0" \
81 	"mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
82 		"setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
83 		"setexpr uboot_maxsize ${uboot_sz} - 400;" \
84 		"mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
85 		"run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
86 		"sf write ${loadaddr} 400 ${filesize};" \
87 		"sf read ${cmp_buf} 400 ${uboot_sz};" \
88 		"cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
89 	"ubiboot=echo Booting from ubi ...; " \
90 		"run ubiargs addmtd addmisc set_fit_default;" \
91 		"bootm ${fit_addr_r}\0" \
92 	"rescueargs=setenv bootargs console=${console},${baudrate} " \
93 		"root=/dev/ram rw\0 " \
94 	"rescueboot=echo Booting rescue system from NOR ...; " \
95 		"run rescueargs addmtd addmisc set_fit_default;" \
96 		"bootm ${fit_addr_r}\0" \
97 	"rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
98 		"${rescue_sys_length}; imi ${fit_addr_r}\0" \
99 	CONFIG_EXTRA_ENV_BOARD_SETTINGS
100 
101 #define CONFIG_BOOTCOMMAND \
102 	"mmc dev ${mmcdev};" \
103 	"if mmc rescan; then " \
104 		"if run loadbootscript; then " \
105 			"run bootscript; " \
106 		"else " \
107 			"if run mmc_load_fit; then " \
108 				"run mmcboot; " \
109 			"else " \
110 				"if run ubifs_load_fit; then " \
111 					"run ubiboot; " \
112 				"else " \
113 					"if run rescue_load_fit; then " \
114 						"run rescueboot; " \
115 					"else " \
116 						"echo RESCUE SYSTEM BOOT " \
117 							"FAILURE;" \
118 					"fi; " \
119 				"fi; " \
120 			"fi; " \
121 		"fi; " \
122 	"else " \
123 		"if run ubifs_load_fit; then " \
124 			"run ubiboot; " \
125 		"else " \
126 			"if run rescue_load_fit; then " \
127 				"run rescueboot; " \
128 			"else " \
129 				"echo RESCUE SYSTEM BOOT FAILURE;" \
130 			"fi; " \
131 		"fi; " \
132 	"fi"
133 
134 #define CONFIG_ARP_TIMEOUT		200UL
135 
136 #define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
137 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x100000)
138 #define CONFIG_SYS_MEMTEST_SCRATCH	0x10800000
139 
140 /* Physical Memory Map */
141 #define CONFIG_NR_DRAM_BANKS		1
142 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
143 
144 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
145 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
146 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
147 
148 #define CONFIG_SYS_INIT_SP_OFFSET \
149 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
150 #define CONFIG_SYS_INIT_SP_ADDR \
151 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
152 
153 /* Environment organization */
154 #define CONFIG_ENV_SIZE			(12 * 1024)
155 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
156 #define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
157 #define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
158 #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
159 #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
160 #define CONFIG_ENV_SECT_SIZE		(0x010000)
161 #define CONFIG_ENV_OFFSET		(0x0d0000)
162 #define CONFIG_ENV_OFFSET_REDUND	(0x0e0000)
163 
164 #define CONFIG_SYS_FSL_USDHC_NUM	2
165 
166 /* I2C */
167 #define CONFIG_SYS_I2C
168 #define CONFIG_SYS_I2C_MXC
169 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
170 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
171 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
172 #define CONFIG_SYS_I2C_SPEED		100000
173 #define CONFIG_SYS_I2C_SLAVE		0x7f
174 #define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x00} }
175 
176 /* NAND stuff */
177 #define CONFIG_SYS_MAX_NAND_DEVICE	1
178 #define CONFIG_SYS_NAND_BASE		0x40000000
179 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
180 #define CONFIG_SYS_NAND_ONFI_DETECTION
181 
182 /* DMA stuff, needed for GPMI/MXS NAND support */
183 
184 /* RTC */
185 #define CONFIG_SYS_I2C_RTC_ADDR	0x68
186 #define CONFIG_SYS_RTC_BUS_NUM	2
187 #define CONFIG_RTC_M41T11
188 
189 /* USB Configs */
190 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
191 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
192 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
193 #define CONFIG_MXC_USB_FLAGS	0
194 
195 /* UBI support */
196 #define CONFIG_MTD_PARTITIONS
197 #define CONFIG_MTD_DEVICE
198 
199 #define CONFIG_HW_WATCHDOG
200 #define CONFIG_IMX_WATCHDOG
201 
202 /* Framebuffer */
203 #define CONFIG_VIDEO_IPUV3
204 /* check this console not needed, after test remove it */
205 #define CONFIG_VIDEO_BMP_RLE8
206 #define CONFIG_SPLASH_SCREEN
207 #define CONFIG_SPLASH_SCREEN_ALIGN
208 #define CONFIG_BMP_16BPP
209 #define CONFIG_VIDEO_LOGO
210 #define CONFIG_VIDEO_BMP_LOGO
211 #define CONFIG_IMX_VIDEO_SKIP
212 
213 #define CONFIG_PWM_IMX
214 #define CONFIG_IMX6_PWM_PER_CLK	66000000
215 
216 #endif /* __ARISTAINETOS_COMMON_CONFIG_H */
217