1 /* 2 * (C) Copyright 2015 3 * (C) Copyright 2014 4 * Heiko Schocher, DENX Software Engineering, hs@denx.de. 5 * 6 * Based on: 7 * Copyright (C) 2012 Freescale Semiconductor, Inc. 8 * 9 * Configuration settings for the Freescale i.MX6Q SabreSD board. 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 #ifndef __ARISTAINETOS_COMMON_CONFIG_H 14 #define __ARISTAINETOS_COMMON_CONFIG_H 15 16 #include "mx6_common.h" 17 18 #define CONFIG_MACH_TYPE 4501 19 #define CONFIG_MMCROOT "/dev/mmcblk0p1" 20 21 /* Size of malloc() pool */ 22 #define CONFIG_SYS_MALLOC_LEN (64 * SZ_1M) 23 24 #define CONFIG_MXC_UART 25 26 /* MMC Configs */ 27 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 28 29 #define CONFIG_FEC_MXC 30 #define CONFIG_MII 31 #define IMX_FEC_BASE ENET_BASE_ADDR 32 #define CONFIG_ETHPRIME "FEC" 33 #define CONFIG_FEC_MXC_PHYADDR 0 34 35 #define CONFIG_PHYLIB 36 #define CONFIG_PHY_MICREL 37 38 #define CONFIG_SPI_FLASH_MTD 39 #define CONFIG_MXC_SPI 40 #define CONFIG_SF_DEFAULT_SPEED 20000000 41 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 42 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN 43 44 #define CONFIG_EXTRA_ENV_SETTINGS \ 45 "script=u-boot.scr\0" \ 46 "fit_file=/boot/system.itb\0" \ 47 "loadaddr=0x12000000\0" \ 48 "fit_addr_r=0x14000000\0" \ 49 "uboot=/boot/u-boot.imx\0" \ 50 "uboot_sz=d0000\0" \ 51 "rescue_sys_addr=f0000\0" \ 52 "rescue_sys_length=f10000\0" \ 53 "panel=lb07wv8\0" \ 54 "splashpos=m,m\0" \ 55 "console=" CONSOLE_DEV "\0" \ 56 "fdt_high=0xffffffff\0" \ 57 "initrd_high=0xffffffff\0" \ 58 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 59 "set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \ 60 "default ${board_type}\0" \ 61 "get_env=mw ${loadaddr} 0 0x20000;" \ 62 "mmc rescan;" \ 63 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \ 64 "env import -t ${loadaddr}\0" \ 65 "default_env=mw ${loadaddr} 0 0x20000;" \ 66 "env export -t ${loadaddr} serial# ethaddr eth1addr " \ 67 "board_type panel;" \ 68 "env default -a;" \ 69 "env import -t ${loadaddr}\0" \ 70 "loadbootscript=" \ 71 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 72 "bootscript=echo Running bootscript from mmc ...; " \ 73 "source\0" \ 74 "mmcpart=1\0" \ 75 "mmcdev=0\0" \ 76 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ 77 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 78 "root=${mmcroot}\0" \ 79 "mmcboot=echo Booting from mmc ...; " \ 80 "run mmcargs addmtd addmisc set_fit_default;" \ 81 "bootm ${fit_addr_r}\0" \ 82 "mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ 83 "${fit_file}\0" \ 84 "mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ 85 "${uboot}\0" \ 86 "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \ 87 "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \ 88 "setexpr uboot_maxsize ${uboot_sz} - 400;" \ 89 "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \ 90 "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \ 91 "sf write ${loadaddr} 400 ${filesize};" \ 92 "sf read ${cmp_buf} 400 ${uboot_sz};" \ 93 "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \ 94 "ubiboot=echo Booting from ubi ...; " \ 95 "run ubiargs addmtd addmisc set_fit_default;" \ 96 "bootm ${fit_addr_r}\0" \ 97 "rescueargs=setenv bootargs console=${console},${baudrate} " \ 98 "root=/dev/ram rw\0 " \ 99 "rescueboot=echo Booting rescue system from NOR ...; " \ 100 "run rescueargs addmtd addmisc set_fit_default;" \ 101 "bootm ${fit_addr_r}\0" \ 102 "rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \ 103 "${rescue_sys_length}; imi ${fit_addr_r}\0" \ 104 CONFIG_EXTRA_ENV_BOARD_SETTINGS 105 106 #define CONFIG_BOOTCOMMAND \ 107 "mmc dev ${mmcdev};" \ 108 "if mmc rescan; then " \ 109 "if run loadbootscript; then " \ 110 "run bootscript; " \ 111 "else " \ 112 "if run mmc_load_fit; then " \ 113 "run mmcboot; " \ 114 "else " \ 115 "if run ubifs_load_fit; then " \ 116 "run ubiboot; " \ 117 "else " \ 118 "if run rescue_load_fit; then " \ 119 "run rescueboot; " \ 120 "else " \ 121 "echo RESCUE SYSTEM BOOT " \ 122 "FAILURE;" \ 123 "fi; " \ 124 "fi; " \ 125 "fi; " \ 126 "fi; " \ 127 "else " \ 128 "if run ubifs_load_fit; then " \ 129 "run ubiboot; " \ 130 "else " \ 131 "if run rescue_load_fit; then " \ 132 "run rescueboot; " \ 133 "else " \ 134 "echo RESCUE SYSTEM BOOT FAILURE;" \ 135 "fi; " \ 136 "fi; " \ 137 "fi" 138 139 #define CONFIG_ARP_TIMEOUT 200UL 140 141 /* Print Buffer Size */ 142 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 143 144 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM 145 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000) 146 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 147 148 /* Physical Memory Map */ 149 #define CONFIG_NR_DRAM_BANKS 1 150 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 151 152 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 153 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 154 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 155 156 #define CONFIG_SYS_INIT_SP_OFFSET \ 157 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 158 #define CONFIG_SYS_INIT_SP_ADDR \ 159 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 160 161 /* Environment organization */ 162 #define CONFIG_ENV_SIZE (12 * 1024) 163 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 164 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS 165 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS 166 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 167 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 168 #define CONFIG_ENV_SECT_SIZE (0x010000) 169 #define CONFIG_ENV_OFFSET (0x0d0000) 170 #define CONFIG_ENV_OFFSET_REDUND (0x0e0000) 171 172 #define CONFIG_SYS_FSL_USDHC_NUM 2 173 174 /* I2C */ 175 #define CONFIG_SYS_I2C 176 #define CONFIG_SYS_I2C_MXC 177 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 178 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 179 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 180 #define CONFIG_SYS_I2C_SPEED 100000 181 #define CONFIG_SYS_I2C_SLAVE 0x7f 182 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x00} } 183 184 /* NAND stuff */ 185 #define CONFIG_CMD_NAND 186 #define CONFIG_CMD_NAND_TRIMFFS 187 #define CONFIG_NAND_MXS 188 #define CONFIG_SYS_MAX_NAND_DEVICE 1 189 #define CONFIG_SYS_NAND_BASE 0x40000000 190 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 191 #define CONFIG_SYS_NAND_ONFI_DETECTION 192 193 /* DMA stuff, needed for GPMI/MXS NAND support */ 194 #define CONFIG_APBH_DMA 195 #define CONFIG_APBH_DMA_BURST 196 #define CONFIG_APBH_DMA_BURST8 197 198 /* RTC */ 199 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 200 #define CONFIG_SYS_RTC_BUS_NUM 2 201 #define CONFIG_RTC_M41T11 202 203 /* USB Configs */ 204 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 205 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ 206 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 207 #define CONFIG_MXC_USB_FLAGS 0 208 209 /* UBI support */ 210 #define CONFIG_MTD_PARTITIONS 211 #define CONFIG_MTD_DEVICE 212 213 #define CONFIG_HW_WATCHDOG 214 #define CONFIG_IMX_WATCHDOG 215 216 /* Framebuffer */ 217 #define CONFIG_VIDEO_IPUV3 218 /* check this console not needed, after test remove it */ 219 #define CONFIG_VIDEO_BMP_RLE8 220 #define CONFIG_SPLASH_SCREEN 221 #define CONFIG_SPLASH_SCREEN_ALIGN 222 #define CONFIG_BMP_16BPP 223 #define CONFIG_VIDEO_LOGO 224 #define CONFIG_VIDEO_BMP_LOGO 225 #define CONFIG_IPUV3_CLK 198000000 226 #define CONFIG_IMX_VIDEO_SKIP 227 228 #define CONFIG_PWM_IMX 229 #define CONFIG_IMX6_PWM_PER_CLK 66000000 230 231 #endif /* __ARISTAINETOS_COMMON_CONFIG_H */ 232