1 /* 2 * (C) Copyright 2015 3 * (C) Copyright 2014 4 * Heiko Schocher, DENX Software Engineering, hs@denx.de. 5 * 6 * Based on: 7 * Copyright (C) 2012 Freescale Semiconductor, Inc. 8 * 9 * Configuration settings for the Freescale i.MX6Q SabreSD board. 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 #ifndef __ARISTAINETOS_COMMON_CONFIG_H 14 #define __ARISTAINETOS_COMMON_CONFIG_H 15 16 #include "mx6_common.h" 17 18 #define CONFIG_MACH_TYPE 4501 19 #define CONFIG_MMCROOT "/dev/mmcblk0p1" 20 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) 21 22 /* Size of malloc() pool */ 23 #define CONFIG_SYS_MALLOC_LEN (64 * SZ_1M) 24 25 #define CONFIG_BOARD_EARLY_INIT_F 26 27 #define CONFIG_MXC_UART 28 29 /* MMC Configs */ 30 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 31 32 #define CONFIG_CMD_PING 33 #define CONFIG_CMD_DHCP 34 #define CONFIG_CMD_MII 35 #define CONFIG_FEC_MXC 36 #define CONFIG_MII 37 #define IMX_FEC_BASE ENET_BASE_ADDR 38 #define CONFIG_ETHPRIME "FEC" 39 #define CONFIG_FEC_MXC_PHYADDR 0 40 41 #define CONFIG_PHYLIB 42 #define CONFIG_PHY_MICREL 43 44 #define CONFIG_CMD_SF 45 #define CONFIG_SPI_FLASH_MTD 46 #define CONFIG_MXC_SPI 47 #define CONFIG_SF_DEFAULT_SPEED 20000000 48 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 49 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN 50 51 /* Command definition */ 52 #define CONFIG_CMD_BMODE 53 54 #define CONFIG_EXTRA_ENV_SETTINGS \ 55 "script=u-boot.scr\0" \ 56 "fit_file=/boot/system.itb\0" \ 57 "loadaddr=0x12000000\0" \ 58 "fit_addr_r=0x14000000\0" \ 59 "uboot=/boot/u-boot.imx\0" \ 60 "uboot_sz=d0000\0" \ 61 "rescue_sys_addr=f0000\0" \ 62 "rescue_sys_length=f10000\0" \ 63 "panel=lb07wv8\0" \ 64 "splashpos=m,m\0" \ 65 "console=" CONFIG_CONSOLE_DEV "\0" \ 66 "fdt_high=0xffffffff\0" \ 67 "initrd_high=0xffffffff\0" \ 68 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 69 "set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \ 70 "default ${board_type}\0" \ 71 "get_env=mw ${loadaddr} 0 0x20000;" \ 72 "mmc rescan;" \ 73 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \ 74 "env import -t ${loadaddr}\0" \ 75 "default_env=mw ${loadaddr} 0 0x20000;" \ 76 "env export -t ${loadaddr} serial# ethaddr eth1addr " \ 77 "board_type panel;" \ 78 "env default -a;" \ 79 "env import -t ${loadaddr}\0" \ 80 "loadbootscript=" \ 81 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 82 "bootscript=echo Running bootscript from mmc ...; " \ 83 "source\0" \ 84 "mmcpart=1\0" \ 85 "mmcdev=0\0" \ 86 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ 87 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 88 "root=${mmcroot}\0" \ 89 "mmcboot=echo Booting from mmc ...; " \ 90 "run mmcargs addmtd addmisc set_fit_default;" \ 91 "bootm ${fit_addr_r}\0" \ 92 "mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ 93 "${fit_file}\0" \ 94 "mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ 95 "${uboot}\0" \ 96 "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \ 97 "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \ 98 "setexpr uboot_maxsize ${uboot_sz} - 400;" \ 99 "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \ 100 "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \ 101 "sf write ${loadaddr} 400 ${filesize};" \ 102 "sf read ${cmp_buf} 400 ${uboot_sz};" \ 103 "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \ 104 "ubiboot=echo Booting from ubi ...; " \ 105 "run ubiargs addmtd addmisc set_fit_default;" \ 106 "bootm ${fit_addr_r}\0" \ 107 "rescueargs=setenv bootargs console=${console},${baudrate} " \ 108 "root=/dev/ram rw\0 " \ 109 "rescueboot=echo Booting rescue system from NOR ...; " \ 110 "run rescueargs addmtd addmisc set_fit_default;" \ 111 "bootm ${fit_addr_r}\0" \ 112 "rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \ 113 "${rescue_sys_length}; imi ${fit_addr_r}\0" \ 114 CONFIG_EXTRA_ENV_BOARD_SETTINGS 115 116 #define CONFIG_BOOTCOMMAND \ 117 "mmc dev ${mmcdev};" \ 118 "if mmc rescan; then " \ 119 "if run loadbootscript; then " \ 120 "run bootscript; " \ 121 "else " \ 122 "if run mmc_load_fit; then " \ 123 "run mmcboot; " \ 124 "else " \ 125 "if run ubifs_load_fit; then " \ 126 "run ubiboot; " \ 127 "else " \ 128 "if run rescue_load_fit; then " \ 129 "run rescueboot; " \ 130 "else " \ 131 "echo RESCUE SYSTEM BOOT " \ 132 "FAILURE;" \ 133 "fi; " \ 134 "fi; " \ 135 "fi; " \ 136 "fi; " \ 137 "else " \ 138 "if run ubifs_load_fit; then " \ 139 "run ubiboot; " \ 140 "else " \ 141 "if run rescue_load_fit; then " \ 142 "run rescueboot; " \ 143 "else " \ 144 "echo RESCUE SYSTEM BOOT FAILURE;" \ 145 "fi; " \ 146 "fi; " \ 147 "fi" 148 149 #define CONFIG_ARP_TIMEOUT 200UL 150 151 /* Print Buffer Size */ 152 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 153 154 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM 155 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000) 156 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 157 158 #define CONFIG_STACKSIZE (128 * 1024) 159 160 /* Physical Memory Map */ 161 #define CONFIG_NR_DRAM_BANKS 1 162 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 163 164 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 165 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 166 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 167 168 #define CONFIG_SYS_INIT_SP_OFFSET \ 169 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 170 #define CONFIG_SYS_INIT_SP_ADDR \ 171 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 172 173 /* Environment organization */ 174 #define CONFIG_ENV_SIZE (12 * 1024) 175 #define CONFIG_ENV_IS_IN_SPI_FLASH 176 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 177 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS 178 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS 179 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 180 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 181 #define CONFIG_ENV_SECT_SIZE (0x010000) 182 #define CONFIG_ENV_OFFSET (0x0d0000) 183 #define CONFIG_ENV_OFFSET_REDUND (0x0e0000) 184 185 #define CONFIG_SYS_FSL_USDHC_NUM 2 186 187 /* I2C */ 188 #define CONFIG_CMD_I2C 189 #define CONFIG_SYS_I2C 190 #define CONFIG_SYS_I2C_MXC 191 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 192 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 193 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 194 #define CONFIG_SYS_I2C_SPEED 100000 195 #define CONFIG_SYS_I2C_SLAVE 0x7f 196 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x00} } 197 198 /* NAND stuff */ 199 #define CONFIG_CMD_NAND 200 #define CONFIG_CMD_NAND_TRIMFFS 201 #define CONFIG_NAND_MXS 202 #define CONFIG_SYS_MAX_NAND_DEVICE 1 203 #define CONFIG_SYS_NAND_BASE 0x40000000 204 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 205 #define CONFIG_SYS_NAND_ONFI_DETECTION 206 207 /* DMA stuff, needed for GPMI/MXS NAND support */ 208 #define CONFIG_APBH_DMA 209 #define CONFIG_APBH_DMA_BURST 210 #define CONFIG_APBH_DMA_BURST8 211 212 /* RTC */ 213 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 214 #define CONFIG_SYS_RTC_BUS_NUM 2 215 #define CONFIG_RTC_M41T11 216 #define CONFIG_CMD_DATE 217 218 /* USB Configs */ 219 #define CONFIG_CMD_USB 220 #define CONFIG_USB_EHCI 221 #define CONFIG_USB_EHCI_MX6 222 #define CONFIG_USB_STORAGE 223 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 224 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ 225 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 226 #define CONFIG_MXC_USB_FLAGS 0 227 228 /* UBI support */ 229 #define CONFIG_LZO 230 #define CONFIG_CMD_MTDPARTS 231 #define CONFIG_MTD_PARTITIONS 232 #define CONFIG_MTD_DEVICE 233 #define CONFIG_RBTREE 234 #define CONFIG_CMD_UBI 235 #define CONFIG_CMD_UBIFS 236 237 #define CONFIG_MTD_UBI_FASTMAP 238 #define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT 1 239 240 #define CONFIG_HW_WATCHDOG 241 #define CONFIG_IMX_WATCHDOG 242 243 /* Framebuffer */ 244 #define CONFIG_VIDEO 245 #define CONFIG_VIDEO_IPUV3 246 /* check this console not needed, after test remove it */ 247 #define CONFIG_CFB_CONSOLE 248 #define CONFIG_VGA_AS_SINGLE_DEVICE 249 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 250 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 251 #define CONFIG_VIDEO_BMP_RLE8 252 #define CONFIG_SPLASH_SCREEN 253 #define CONFIG_SPLASH_SCREEN_ALIGN 254 #define CONFIG_BMP_16BPP 255 #define CONFIG_VIDEO_LOGO 256 #define CONFIG_VIDEO_BMP_LOGO 257 #define CONFIG_IPUV3_CLK 198000000 258 #define CONFIG_IMX_VIDEO_SKIP 259 260 #define CONFIG_CMD_BMP 261 262 #define CONFIG_PWM_IMX 263 #define CONFIG_IMX6_PWM_PER_CLK 66000000 264 265 #endif /* __ARISTAINETOS_COMMON_CONFIG_H */ 266