1 /* 2 * (C) Copyright 2015 3 * (C) Copyright 2014 4 * Heiko Schocher, DENX Software Engineering, hs@denx.de. 5 * 6 * Based on: 7 * Copyright (C) 2012 Freescale Semiconductor, Inc. 8 * 9 * Configuration settings for the Freescale i.MX6Q SabreSD board. 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 #ifndef __ARISTAINETOS_COMMON_CONFIG_H 14 #define __ARISTAINETOS_COMMON_CONFIG_H 15 16 #include "mx6_common.h" 17 18 #define CONFIG_MACH_TYPE 4501 19 #define CONFIG_MMCROOT "/dev/mmcblk0p1" 20 21 /* Size of malloc() pool */ 22 #define CONFIG_SYS_MALLOC_LEN (64 * SZ_1M) 23 24 #define CONFIG_BOARD_EARLY_INIT_F 25 26 #define CONFIG_MXC_UART 27 28 /* MMC Configs */ 29 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 30 31 #define CONFIG_FEC_MXC 32 #define CONFIG_MII 33 #define IMX_FEC_BASE ENET_BASE_ADDR 34 #define CONFIG_ETHPRIME "FEC" 35 #define CONFIG_FEC_MXC_PHYADDR 0 36 37 #define CONFIG_PHYLIB 38 #define CONFIG_PHY_MICREL 39 40 #define CONFIG_SPI_FLASH_MTD 41 #define CONFIG_MXC_SPI 42 #define CONFIG_SF_DEFAULT_SPEED 20000000 43 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 44 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN 45 46 /* Command definition */ 47 #define CONFIG_CMD_BMODE 48 49 #define CONFIG_EXTRA_ENV_SETTINGS \ 50 "script=u-boot.scr\0" \ 51 "fit_file=/boot/system.itb\0" \ 52 "loadaddr=0x12000000\0" \ 53 "fit_addr_r=0x14000000\0" \ 54 "uboot=/boot/u-boot.imx\0" \ 55 "uboot_sz=d0000\0" \ 56 "rescue_sys_addr=f0000\0" \ 57 "rescue_sys_length=f10000\0" \ 58 "panel=lb07wv8\0" \ 59 "splashpos=m,m\0" \ 60 "console=" CONSOLE_DEV "\0" \ 61 "fdt_high=0xffffffff\0" \ 62 "initrd_high=0xffffffff\0" \ 63 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 64 "set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \ 65 "default ${board_type}\0" \ 66 "get_env=mw ${loadaddr} 0 0x20000;" \ 67 "mmc rescan;" \ 68 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \ 69 "env import -t ${loadaddr}\0" \ 70 "default_env=mw ${loadaddr} 0 0x20000;" \ 71 "env export -t ${loadaddr} serial# ethaddr eth1addr " \ 72 "board_type panel;" \ 73 "env default -a;" \ 74 "env import -t ${loadaddr}\0" \ 75 "loadbootscript=" \ 76 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 77 "bootscript=echo Running bootscript from mmc ...; " \ 78 "source\0" \ 79 "mmcpart=1\0" \ 80 "mmcdev=0\0" \ 81 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ 82 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 83 "root=${mmcroot}\0" \ 84 "mmcboot=echo Booting from mmc ...; " \ 85 "run mmcargs addmtd addmisc set_fit_default;" \ 86 "bootm ${fit_addr_r}\0" \ 87 "mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ 88 "${fit_file}\0" \ 89 "mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ 90 "${uboot}\0" \ 91 "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \ 92 "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \ 93 "setexpr uboot_maxsize ${uboot_sz} - 400;" \ 94 "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \ 95 "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \ 96 "sf write ${loadaddr} 400 ${filesize};" \ 97 "sf read ${cmp_buf} 400 ${uboot_sz};" \ 98 "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \ 99 "ubiboot=echo Booting from ubi ...; " \ 100 "run ubiargs addmtd addmisc set_fit_default;" \ 101 "bootm ${fit_addr_r}\0" \ 102 "rescueargs=setenv bootargs console=${console},${baudrate} " \ 103 "root=/dev/ram rw\0 " \ 104 "rescueboot=echo Booting rescue system from NOR ...; " \ 105 "run rescueargs addmtd addmisc set_fit_default;" \ 106 "bootm ${fit_addr_r}\0" \ 107 "rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \ 108 "${rescue_sys_length}; imi ${fit_addr_r}\0" \ 109 CONFIG_EXTRA_ENV_BOARD_SETTINGS 110 111 #define CONFIG_BOOTCOMMAND \ 112 "mmc dev ${mmcdev};" \ 113 "if mmc rescan; then " \ 114 "if run loadbootscript; then " \ 115 "run bootscript; " \ 116 "else " \ 117 "if run mmc_load_fit; then " \ 118 "run mmcboot; " \ 119 "else " \ 120 "if run ubifs_load_fit; then " \ 121 "run ubiboot; " \ 122 "else " \ 123 "if run rescue_load_fit; then " \ 124 "run rescueboot; " \ 125 "else " \ 126 "echo RESCUE SYSTEM BOOT " \ 127 "FAILURE;" \ 128 "fi; " \ 129 "fi; " \ 130 "fi; " \ 131 "fi; " \ 132 "else " \ 133 "if run ubifs_load_fit; then " \ 134 "run ubiboot; " \ 135 "else " \ 136 "if run rescue_load_fit; then " \ 137 "run rescueboot; " \ 138 "else " \ 139 "echo RESCUE SYSTEM BOOT FAILURE;" \ 140 "fi; " \ 141 "fi; " \ 142 "fi" 143 144 #define CONFIG_ARP_TIMEOUT 200UL 145 146 /* Print Buffer Size */ 147 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 148 149 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM 150 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000) 151 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 152 153 #define CONFIG_STACKSIZE (128 * 1024) 154 155 /* Physical Memory Map */ 156 #define CONFIG_NR_DRAM_BANKS 1 157 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 158 159 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 160 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 161 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 162 163 #define CONFIG_SYS_INIT_SP_OFFSET \ 164 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 165 #define CONFIG_SYS_INIT_SP_ADDR \ 166 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 167 168 /* Environment organization */ 169 #define CONFIG_ENV_SIZE (12 * 1024) 170 #define CONFIG_ENV_IS_IN_SPI_FLASH 171 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 172 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS 173 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS 174 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 175 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 176 #define CONFIG_ENV_SECT_SIZE (0x010000) 177 #define CONFIG_ENV_OFFSET (0x0d0000) 178 #define CONFIG_ENV_OFFSET_REDUND (0x0e0000) 179 180 #define CONFIG_SYS_FSL_USDHC_NUM 2 181 182 /* I2C */ 183 #define CONFIG_SYS_I2C 184 #define CONFIG_SYS_I2C_MXC 185 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 186 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 187 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 188 #define CONFIG_SYS_I2C_SPEED 100000 189 #define CONFIG_SYS_I2C_SLAVE 0x7f 190 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x00} } 191 192 /* NAND stuff */ 193 #define CONFIG_CMD_NAND 194 #define CONFIG_CMD_NAND_TRIMFFS 195 #define CONFIG_NAND_MXS 196 #define CONFIG_SYS_MAX_NAND_DEVICE 1 197 #define CONFIG_SYS_NAND_BASE 0x40000000 198 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 199 #define CONFIG_SYS_NAND_ONFI_DETECTION 200 201 /* DMA stuff, needed for GPMI/MXS NAND support */ 202 #define CONFIG_APBH_DMA 203 #define CONFIG_APBH_DMA_BURST 204 #define CONFIG_APBH_DMA_BURST8 205 206 /* RTC */ 207 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 208 #define CONFIG_SYS_RTC_BUS_NUM 2 209 #define CONFIG_RTC_M41T11 210 #define CONFIG_CMD_DATE 211 212 /* USB Configs */ 213 #define CONFIG_USB_EHCI 214 #define CONFIG_USB_EHCI_MX6 215 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 216 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ 217 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 218 #define CONFIG_MXC_USB_FLAGS 0 219 220 /* UBI support */ 221 #define CONFIG_LZO 222 #define CONFIG_CMD_MTDPARTS 223 #define CONFIG_MTD_PARTITIONS 224 #define CONFIG_MTD_DEVICE 225 #define CONFIG_RBTREE 226 #define CONFIG_CMD_UBIFS 227 228 #define CONFIG_HW_WATCHDOG 229 #define CONFIG_IMX_WATCHDOG 230 231 /* Framebuffer */ 232 #define CONFIG_VIDEO_IPUV3 233 /* check this console not needed, after test remove it */ 234 #define CONFIG_VIDEO_BMP_RLE8 235 #define CONFIG_SPLASH_SCREEN 236 #define CONFIG_SPLASH_SCREEN_ALIGN 237 #define CONFIG_BMP_16BPP 238 #define CONFIG_VIDEO_LOGO 239 #define CONFIG_VIDEO_BMP_LOGO 240 #define CONFIG_IPUV3_CLK 198000000 241 #define CONFIG_IMX_VIDEO_SKIP 242 243 #define CONFIG_CMD_BMP 244 245 #define CONFIG_PWM_IMX 246 #define CONFIG_IMX6_PWM_PER_CLK 66000000 247 248 #endif /* __ARISTAINETOS_COMMON_CONFIG_H */ 249