1 /* 2 * (C) Copyright 2015 3 * (C) Copyright 2014 4 * Heiko Schocher, DENX Software Engineering, hs@denx.de. 5 * 6 * Based on: 7 * Copyright (C) 2012 Freescale Semiconductor, Inc. 8 * 9 * Configuration settings for the Freescale i.MX6Q SabreSD board. 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 #ifndef __ARISTAINETOS_COMMON_CONFIG_H 14 #define __ARISTAINETOS_COMMON_CONFIG_H 15 16 #include "mx6_common.h" 17 18 #define CONFIG_MACH_TYPE 4501 19 #define CONFIG_MMCROOT "/dev/mmcblk0p1" 20 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) 21 22 /* Size of malloc() pool */ 23 #define CONFIG_SYS_MALLOC_LEN (64 * SZ_1M) 24 25 #define CONFIG_BOARD_EARLY_INIT_F 26 27 #define CONFIG_MXC_UART 28 29 /* MMC Configs */ 30 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 31 32 #define CONFIG_CMD_PING 33 #define CONFIG_CMD_DHCP 34 #define CONFIG_CMD_MII 35 #define CONFIG_FEC_MXC 36 #define CONFIG_MII 37 #define IMX_FEC_BASE ENET_BASE_ADDR 38 #define CONFIG_ETHPRIME "FEC" 39 #define CONFIG_FEC_MXC_PHYADDR 0 40 41 #define CONFIG_PHYLIB 42 #define CONFIG_PHY_MICREL 43 44 #define CONFIG_CMD_SF 45 #define CONFIG_SPI_FLASH_MTD 46 #define CONFIG_SPI_FLASH_STMICRO 47 #define CONFIG_MXC_SPI 48 #define CONFIG_SF_DEFAULT_SPEED 20000000 49 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 50 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN 51 52 /* Command definition */ 53 #define CONFIG_CMD_BMODE 54 55 #define CONFIG_EXTRA_ENV_SETTINGS \ 56 "script=u-boot.scr\0" \ 57 "fit_file=/boot/system.itb\0" \ 58 "loadaddr=0x12000000\0" \ 59 "fit_addr_r=0x14000000\0" \ 60 "uboot=/boot/u-boot.imx\0" \ 61 "uboot_sz=d0000\0" \ 62 "rescue_sys_addr=f0000\0" \ 63 "rescue_sys_length=f10000\0" \ 64 "panel=lb07wv8\0" \ 65 "splashpos=m,m\0" \ 66 "console=" CONFIG_CONSOLE_DEV "\0" \ 67 "fdt_high=0xffffffff\0" \ 68 "initrd_high=0xffffffff\0" \ 69 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 70 "set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \ 71 "default ${board_type}\0" \ 72 "get_env=mw ${loadaddr} 0 0x20000;" \ 73 "mmc rescan;" \ 74 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \ 75 "env import -t ${loadaddr}\0" \ 76 "default_env=mw ${loadaddr} 0 0x20000;" \ 77 "env export -t ${loadaddr} serial# ethaddr eth1addr " \ 78 "board_type panel;" \ 79 "env default -a;" \ 80 "env import -t ${loadaddr}\0" \ 81 "loadbootscript=" \ 82 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 83 "bootscript=echo Running bootscript from mmc ...; " \ 84 "source\0" \ 85 "mmcpart=1\0" \ 86 "mmcdev=0\0" \ 87 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ 88 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 89 "root=${mmcroot}\0" \ 90 "mmcboot=echo Booting from mmc ...; " \ 91 "run mmcargs addmtd addmisc set_fit_default;" \ 92 "bootm ${fit_addr_r}\0" \ 93 "mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ 94 "${fit_file}\0" \ 95 "mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ 96 "${uboot}\0" \ 97 "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \ 98 "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \ 99 "setexpr uboot_maxsize ${uboot_sz} - 400;" \ 100 "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \ 101 "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \ 102 "sf write ${loadaddr} 400 ${filesize};" \ 103 "sf read ${cmp_buf} 400 ${uboot_sz};" \ 104 "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \ 105 "ubiboot=echo Booting from ubi ...; " \ 106 "run ubiargs addmtd addmisc set_fit_default;" \ 107 "bootm ${fit_addr_r}\0" \ 108 "rescueargs=setenv bootargs console=${console},${baudrate} " \ 109 "root=/dev/ram rw\0 " \ 110 "rescueboot=echo Booting rescue system from NOR ...; " \ 111 "run rescueargs addmtd addmisc set_fit_default;" \ 112 "bootm ${fit_addr_r}\0" \ 113 "rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \ 114 "${rescue_sys_length}; imi ${fit_addr_r}\0" \ 115 CONFIG_EXTRA_ENV_BOARD_SETTINGS 116 117 #define CONFIG_BOOTCOMMAND \ 118 "mmc dev ${mmcdev};" \ 119 "if mmc rescan; then " \ 120 "if run loadbootscript; then " \ 121 "run bootscript; " \ 122 "else " \ 123 "if run mmc_load_fit; then " \ 124 "run mmcboot; " \ 125 "else " \ 126 "if run ubifs_load_fit; then " \ 127 "run ubiboot; " \ 128 "else " \ 129 "if run rescue_load_fit; then " \ 130 "run rescueboot; " \ 131 "else " \ 132 "echo RESCUE SYSTEM BOOT " \ 133 "FAILURE;" \ 134 "fi; " \ 135 "fi; " \ 136 "fi; " \ 137 "fi; " \ 138 "else " \ 139 "if run ubifs_load_fit; then " \ 140 "run ubiboot; " \ 141 "else " \ 142 "if run rescue_load_fit; then " \ 143 "run rescueboot; " \ 144 "else " \ 145 "echo RESCUE SYSTEM BOOT FAILURE;" \ 146 "fi; " \ 147 "fi; " \ 148 "fi" 149 150 #define CONFIG_ARP_TIMEOUT 200UL 151 152 /* Print Buffer Size */ 153 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 154 155 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM 156 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000) 157 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 158 159 #define CONFIG_STACKSIZE (128 * 1024) 160 161 /* Physical Memory Map */ 162 #define CONFIG_NR_DRAM_BANKS 1 163 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 164 165 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 166 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 167 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 168 169 #define CONFIG_SYS_INIT_SP_OFFSET \ 170 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 171 #define CONFIG_SYS_INIT_SP_ADDR \ 172 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 173 174 /* Environment organization */ 175 #define CONFIG_ENV_SIZE (12 * 1024) 176 #define CONFIG_ENV_IS_IN_SPI_FLASH 177 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 178 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS 179 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS 180 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 181 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 182 #define CONFIG_ENV_SECT_SIZE (0x010000) 183 #define CONFIG_ENV_OFFSET (0x0d0000) 184 #define CONFIG_ENV_OFFSET_REDUND (0x0e0000) 185 186 #define CONFIG_SYS_FSL_USDHC_NUM 2 187 188 /* I2C */ 189 #define CONFIG_CMD_I2C 190 #define CONFIG_SYS_I2C 191 #define CONFIG_SYS_I2C_MXC 192 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 193 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 194 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 195 #define CONFIG_SYS_I2C_SPEED 100000 196 #define CONFIG_SYS_I2C_SLAVE 0x7f 197 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x00} } 198 199 /* NAND stuff */ 200 #define CONFIG_CMD_NAND 201 #define CONFIG_CMD_NAND_TRIMFFS 202 #define CONFIG_NAND_MXS 203 #define CONFIG_SYS_MAX_NAND_DEVICE 1 204 #define CONFIG_SYS_NAND_BASE 0x40000000 205 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 206 #define CONFIG_SYS_NAND_ONFI_DETECTION 207 208 /* DMA stuff, needed for GPMI/MXS NAND support */ 209 #define CONFIG_APBH_DMA 210 #define CONFIG_APBH_DMA_BURST 211 #define CONFIG_APBH_DMA_BURST8 212 213 /* RTC */ 214 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 215 #define CONFIG_SYS_RTC_BUS_NUM 2 216 #define CONFIG_RTC_M41T11 217 #define CONFIG_CMD_DATE 218 219 /* USB Configs */ 220 #define CONFIG_CMD_USB 221 #define CONFIG_USB_EHCI 222 #define CONFIG_USB_EHCI_MX6 223 #define CONFIG_USB_STORAGE 224 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 225 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ 226 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 227 #define CONFIG_MXC_USB_FLAGS 0 228 229 /* UBI support */ 230 #define CONFIG_LZO 231 #define CONFIG_CMD_MTDPARTS 232 #define CONFIG_MTD_PARTITIONS 233 #define CONFIG_MTD_DEVICE 234 #define CONFIG_RBTREE 235 #define CONFIG_CMD_UBI 236 #define CONFIG_CMD_UBIFS 237 238 #define CONFIG_MTD_UBI_FASTMAP 239 #define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT 1 240 241 #define CONFIG_HW_WATCHDOG 242 #define CONFIG_IMX_WATCHDOG 243 244 #define CONFIG_FIT 245 246 /* Framebuffer */ 247 #define CONFIG_VIDEO 248 #define CONFIG_VIDEO_IPUV3 249 /* check this console not needed, after test remove it */ 250 #define CONFIG_CFB_CONSOLE 251 #define CONFIG_VGA_AS_SINGLE_DEVICE 252 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 253 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 254 #define CONFIG_VIDEO_BMP_RLE8 255 #define CONFIG_SPLASH_SCREEN 256 #define CONFIG_SPLASH_SCREEN_ALIGN 257 #define CONFIG_BMP_16BPP 258 #define CONFIG_VIDEO_LOGO 259 #define CONFIG_VIDEO_BMP_LOGO 260 #define CONFIG_IPUV3_CLK 198000000 261 #define CONFIG_IMX_VIDEO_SKIP 262 263 #define CONFIG_CMD_BMP 264 265 #define CONFIG_PWM_IMX 266 #define CONFIG_IMX6_PWM_PER_CLK 66000000 267 268 #endif /* __ARISTAINETOS_COMMON_CONFIG_H */ 269