xref: /openbmc/u-boot/drivers/timer/Kconfig (revision 24109bba)
1menu "Timer Support"
2
3config TIMER
4	bool "Enable driver model for timer drivers"
5	depends on DM
6	help
7	  Enable driver model for timer access. It uses the same API as
8	  lib/time.c, but now implemented by the uclass. The first timer
9	  will be used. The timer is usually a 32 bits free-running up
10	  counter. There may be no real tick, and no timer interrupt.
11
12config SPL_TIMER
13	bool "Enable driver model for timer drivers in SPL"
14	depends on TIMER && SPL
15	help
16	  Enable support for timer drivers in SPL. These can be used to get
17	  a timer value when in SPL, or perhaps for implementing a delay
18	  function. This enables the drivers in drivers/timer as part of an
19	  SPL build.
20
21config TPL_TIMER
22	bool "Enable driver model for timer drivers in TPL"
23	depends on TIMER && TPL
24	help
25	  Enable support for timer drivers in TPL. These can be used to get
26	  a timer value when in TPL, or perhaps for implementing a delay
27	  function. This enables the drivers in drivers/timer as part of an
28	  TPL build.
29
30config TIMER_EARLY
31	bool "Allow timer to be used early in U-Boot"
32	depends on TIMER
33	# initr_bootstage() requires a timer and is called before initr_dm()
34	# so only the early timer is available
35	default y if X86 && BOOTSTAGE
36	help
37	  In some cases the timer must be accessible before driver model is
38	  active. Examples include when using CONFIG_TRACE to trace U-Boot's
39	  execution before driver model is set up. Enable this option to
40	  use an early timer. These functions must be supported by your timer
41	  driver: timer_early_get_count() and timer_early_get_rate().
42
43config ALTERA_TIMER
44	bool "Altera timer support"
45	depends on TIMER
46	help
47	  Select this to enable a timer for Altera devices. Please find
48	  details on the "Embedded Peripherals IP User Guide" of Altera.
49
50config ATMEL_PIT_TIMER
51	bool "Atmel periodic interval timer support"
52	depends on TIMER
53	help
54	  Select this to enable a periodic interval timer for Atmel devices,
55	  it is designed to offer maximum accuracy and efficient management,
56	  even for systems with long response time.
57
58config CADENCE_TTC_TIMER
59	bool "Cadence TTC (Triple Timer Counter)"
60	depends on TIMER
61	help
62	  Enables support for the cadence ttc driver. This driver is present
63	  on Xilinx Zynq and ZynqMP SoCs.
64
65config DESIGNWARE_APB_TIMER
66	bool "Designware APB Timer"
67	depends on TIMER
68	help
69	  Enables support for the Designware APB Timer driver. This timer is
70	  present on Altera SoCFPGA SoCs.
71
72config SANDBOX_TIMER
73	bool "Sandbox timer support"
74	depends on SANDBOX && TIMER
75	help
76	  Select this to enable an emulated timer for sandbox. It gets
77	  time from host os.
78
79config X86_TSC_TIMER
80	bool "x86 Time-Stamp Counter (TSC) timer support"
81	depends on TIMER && X86
82	help
83	  Select this to enable Time-Stamp Counter (TSC) timer for x86.
84
85config X86_TSC_TIMER_EARLY_FREQ
86	int "x86 TSC timer frequency in MHz when used as the early timer"
87	depends on X86_TSC_TIMER
88	default 1000
89	help
90	  Sets the estimated CPU frequency in MHz when TSC is used as the
91	  early timer and the frequency can neither be calibrated via some
92	  hardware ways, nor got from device tree at the time when device
93	  tree is not available yet.
94
95config OMAP_TIMER
96	bool "Omap timer support"
97	depends on TIMER
98	help
99	  Select this to enable an timer for Omap devices.
100
101config AST_TIMER
102	bool "Aspeed ast2400/ast2500 timer support"
103	depends on TIMER
104	default y if ARCH_ASPEED
105	help
106	  Select this to enable timer for Aspeed ast2400/ast2500 devices.
107	  This is a simple sys timer driver, it is compatible with lib/time.c,
108	  but does not support any interrupts. Even though SoC has 8 hardware
109	  counters, they are all treated as a single device by this driver.
110	  This is mostly because they all share several registers which
111	  makes it difficult to completely separate them.
112
113config STI_TIMER
114	bool "STi timer support"
115	depends on TIMER
116	default y if ARCH_STI
117	help
118	  Select this to enable a timer for STi devices.
119
120config ARC_TIMER
121	bool "ARC timer support"
122	depends on TIMER && ARC && CLK
123	help
124	  Select this to enable built-in ARC timers.
125	  ARC cores may have up to 2 built-in timers: timer0 and timer1,
126	  usually at least one of them exists. Either of them is supported
127	  in U-Boot.
128
129config AG101P_TIMER
130	bool "AG101P timer support"
131	depends on TIMER && NDS32
132	help
133	  Select this to enable a timer for AG01P devices.
134
135config ATCPIT100_TIMER
136	bool "ATCPIT100 timer support"
137	depends on TIMER
138	help
139	  Select this to enable a ATCPIT100 timer which will be embeded
140		in AE3XX, AE250 boards.
141
142config ROCKCHIP_TIMER
143        bool "Rockchip timer support"
144	depends on TIMER
145	help
146	  Select this to enable support for the timer found on
147	  Rockchip devices.
148
149config STM32_TIMER
150        bool "STM32 timer support"
151	depends on TIMER
152	help
153	  Select this to enable support for the timer found on
154	  STM32 devices.
155
156config MPC83XX_TIMER
157        bool "MPC83xx timer support"
158	depends on TIMER
159	help
160	  Select this to enable support for the timer found on
161	  devices based on the MPC83xx family of SoCs.
162
163endmenu
164