xref: /openbmc/u-boot/drivers/spi/Kconfig (revision dd1a1ec2)
1menuconfig SPI
2	bool "SPI Support"
3
4if SPI
5
6config DM_SPI
7	bool "Enable Driver Model for SPI drivers"
8	depends on DM
9	help
10	  Enable driver model for SPI. The SPI slave interface
11	  (spi_setup_slave(), spi_xfer(), etc.) is then implemented by
12	  the SPI uclass. Drivers provide methods to access the SPI
13	  buses that they control. The uclass interface is defined in
14	  include/spi.h. The existing spi_slave structure is attached
15	  as 'parent data' to every slave on each bus. Slaves
16	  typically use driver-private data instead of extending the
17	  spi_slave structure.
18
19config SPI_MEM
20	bool "SPI memory extension"
21	help
22	  Enable this option if you want to enable the SPI memory extension.
23	  This extension is meant to simplify interaction with SPI memories
24	  by providing an high-level interface to send memory-like commands.
25
26if DM_SPI
27
28config ALTERA_SPI
29	bool "Altera SPI driver"
30	help
31	  Enable the Altera SPI driver. This driver can be used to
32	  access the SPI NOR flash on platforms embedding this Altera
33	  IP core. Please find details on the "Embedded Peripherals IP
34	  User Guide" of Altera.
35
36config ATCSPI200_SPI
37	bool "Andestech ATCSPI200 SPI driver"
38	help
39	  Enable the Andestech ATCSPI200 SPI driver. This driver can be
40	  used to access the SPI flash on AE3XX and AE250 platforms embedding
41	  this Andestech IP core.
42
43config ATH79_SPI
44	bool "Atheros SPI driver"
45	depends on ARCH_ATH79
46	help
47	  Enable the Atheros ar7xxx/ar9xxx SoC SPI driver, it was used
48	  to access SPI NOR flash and other SPI peripherals. This driver
49	  uses driver model and requires a device tree binding to operate.
50	  please refer to doc/device-tree-bindings/spi/spi-ath79.txt.
51
52config ATMEL_SPI
53	bool "Atmel SPI driver"
54	default y if ARCH_AT91
55	help
56	  This enables driver for the Atmel SPI Controller, present on
57	  many AT91 (ARM) chips. This driver can be used to access
58	  the SPI Flash, such as AT25DF321.
59
60config BCM63XX_HSSPI
61	bool "BCM63XX HSSPI driver"
62	depends on ARCH_BMIPS
63	help
64	  Enable the BCM6328 HSSPI driver. This driver can be used to
65	  access the SPI NOR flash on platforms embedding this Broadcom
66	  SPI core.
67
68config BCM63XX_SPI
69	bool "BCM6348 SPI driver"
70	depends on ARCH_BMIPS
71	help
72	  Enable the BCM6348/BCM6358 SPI driver. This driver can be used to
73	  access the SPI NOR flash on platforms embedding these Broadcom
74	  SPI cores.
75
76config BCMSTB_SPI
77	bool "BCMSTB SPI driver"
78	help
79	  Enable the Broadcom set-top box SPI driver. This driver can
80	  be used to access the SPI flash on platforms embedding this
81	  Broadcom SPI core.
82
83config CADENCE_QSPI
84	bool "Cadence QSPI driver"
85	help
86	  Enable the Cadence Quad-SPI (QSPI) driver. This driver can be
87	  used to access the SPI NOR flash on platforms embedding this
88	  Cadence IP core.
89
90config DESIGNWARE_SPI
91	bool "Designware SPI driver"
92	help
93	  Enable the Designware SPI driver. This driver can be used to
94	  access the SPI NOR flash on platforms embedding this Designware
95	  IP core.
96
97config EXYNOS_SPI
98	bool "Samsung Exynos SPI driver"
99	help
100	  Enable the Samsung Exynos SPI driver. This driver can be used to
101	  access the SPI NOR flash on platforms embedding this Samsung
102	  Exynos IP core.
103
104config FSL_DSPI
105	bool "Freescale DSPI driver"
106	help
107	  Enable the Freescale DSPI driver. This driver can be used to
108	  access the SPI NOR flash and SPI Data flash on platforms embedding
109	  this Freescale DSPI IP core. LS102xA and Colibri VF50/VF61 platforms
110	  use this driver.
111
112config ICH_SPI
113	bool "Intel ICH SPI driver"
114	imply SPI_FLASH_BAR
115	help
116	  Enable the Intel ICH SPI driver. This driver can be used to
117	  access the SPI NOR flash on platforms embedding this Intel
118	  ICH IP core.
119
120config MESON_SPIFC
121	bool "Amlogic Meson SPI Flash Controller driver"
122	depends on ARCH_MESON
123	help
124	  Enable the Amlogic Meson SPI Flash Controller SPIFC) driver.
125	  This driver can be used to access the SPI NOR flash chips on
126	  Amlogic Meson SoCs.
127
128config MPC8XX_SPI
129	bool "MPC8XX SPI Driver"
130	depends on MPC8xx
131	help
132	  Enable support for SPI on MPC8XX
133
134config MT7621_SPI
135	bool "MediaTek MT7621 SPI driver"
136	depends on ARCH_MT7620
137	help
138	  Enable the MT7621 SPI driver. This driver can be used to access
139	  the SPI NOR flash on platforms embedding this Ralink / MediaTek
140	  SPI core, like MT7621/7628/7688.
141
142config MTK_QSPI
143	bool "Mediatek QSPI driver"
144	imply SPI_FLASH_BAR
145	help
146	  Enable the Mediatek QSPI driver. This driver can be
147	  used to access the SPI NOR flash on platforms embedding this
148	  Mediatek QSPI IP core.
149
150config MVEBU_A3700_SPI
151	bool "Marvell Armada 3700 SPI driver"
152	select CLK_ARMADA_3720
153	help
154	  Enable the Marvell Armada 3700 SPI driver. This driver can be
155	  used to access the SPI NOR flash on platforms embedding this
156	  Marvell IP core.
157
158config PIC32_SPI
159	bool "Microchip PIC32 SPI driver"
160	depends on MACH_PIC32
161	help
162	  Enable the Microchip PIC32 SPI driver. This driver can be used
163	  to access the SPI NOR flash, MMC-over-SPI on platforms based on
164	  Microchip PIC32 family devices.
165
166config PL022_SPI
167	bool "ARM AMBA PL022 SSP controller driver"
168	depends on ARM
169	help
170	  This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP
171	  controller. If you have an embedded system with an AMBA(R)
172	  bus and a PL022 controller, say Y or M here.
173
174config RENESAS_RPC_SPI
175	bool "Renesas RPC SPI driver"
176	depends on RCAR_GEN3
177	imply SPI_FLASH_BAR
178	help
179	  Enable the Renesas RPC SPI driver, used to access SPI NOR flash
180	  on Renesas RCar Gen3 SoCs. This uses driver model and requires a
181	  device tree binding to operate.
182
183config ROCKCHIP_SPI
184	bool "Rockchip SPI driver"
185	help
186	  Enable the Rockchip SPI driver, used to access SPI NOR flash and
187	  other SPI peripherals (such as the Chrome OS EC) on Rockchip SoCs.
188	  This uses driver model and requires a device tree binding to
189	  operate.
190
191config SANDBOX_SPI
192	bool "Sandbox SPI driver"
193	depends on SANDBOX && DM
194	help
195	  Enable SPI support for sandbox. This is an emulation of a real SPI
196	  bus. Devices can be attached to the bus using the device tree
197	  which specifies the driver to use. As an example, see this device
198	  tree fragment from sandbox.dts. It shows that the SPI bus has a
199	  single flash device on chip select 0 which is emulated by the driver
200	  for "sandbox,spi-flash", which is in drivers/mtd/spi/sandbox.c.
201
202	  spi@0 {
203		#address-cells = <1>;
204		#size-cells = <0>;
205		reg = <0>;
206		compatible = "sandbox,spi";
207		cs-gpios = <0>, <&gpio_a 0>;
208		flash@0 {
209			reg = <0>;
210			compatible = "spansion,m25p16", "sandbox,spi-flash";
211			spi-max-frequency = <40000000>;
212			sandbox,filename = "spi.bin";
213		};
214	  };
215
216config SPI_SUNXI
217	bool "Allwinner SoC SPI controllers"
218	help
219	  Enable the Allwinner SoC SPi controller driver.
220
221	  Same controller driver can reuse in all Allwinner SoC variants.
222
223config STM32_QSPI
224	bool "STM32F7 QSPI driver"
225	depends on STM32F7
226	imply SPI_FLASH_BAR
227	help
228	  Enable the STM32F7 Quad-SPI (QSPI) driver. This driver can be
229	  used to access the SPI NOR flash chips on platforms embedding
230	  this ST IP core.
231
232config TEGRA114_SPI
233	bool "nVidia Tegra114 SPI driver"
234	help
235	  Enable the nVidia Tegra114 SPI driver. This driver can be used to
236	  access the SPI NOR flash on platforms embedding this nVidia Tegra114
237	  IP core.
238
239	  This controller is different than the older SoCs SPI controller and
240	  also register interface get changed with this controller.
241
242config TEGRA20_SFLASH
243	bool "nVidia Tegra20 Serial Flash controller driver"
244	help
245	  Enable the nVidia Tegra20 Serial Flash controller driver. This driver
246	  can be used to access the SPI NOR flash on platforms embedding this
247	  nVidia Tegra20 IP core.
248
249config TEGRA20_SLINK
250	bool "nVidia Tegra20/Tegra30 SLINK driver"
251	help
252	  Enable the nVidia Tegra20/Tegra30 SLINK driver. This driver can
253	  be used to access the SPI NOR flash on platforms embedding this
254	  nVidia Tegra20/Tegra30 IP cores.
255
256config TEGRA210_QSPI
257	bool "nVidia Tegra210 QSPI driver"
258	help
259	  Enable the Tegra Quad-SPI (QSPI) driver for T210. This driver
260	  be used to access SPI chips on platforms embedding this
261	  NVIDIA Tegra210 IP core.
262
263config XILINX_SPI
264	bool "Xilinx SPI driver"
265	help
266	  Enable the Xilinx SPI driver from the Xilinx EDK. This SPI
267	  controller support 8 bit SPI transfers only, with or w/o FIFO.
268	  For more info on Xilinx SPI Register Definitions and Overview
269	  see driver file - drivers/spi/xilinx_spi.c
270
271config ZYNQ_SPI
272	bool "Zynq SPI driver"
273	depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
274	help
275	  Enable the Zynq SPI driver. This driver can be used to
276	  access the SPI NOR flash on platforms embedding this Zynq
277	  SPI IP core.
278
279config ZYNQ_QSPI
280	bool "Zynq QSPI driver"
281	depends on ARCH_ZYNQ
282	imply SPI_FLASH_BAR
283	help
284	  Enable the Zynq Quad-SPI (QSPI) driver. This driver can be
285	  used to access the SPI NOR flash on platforms embedding this
286	  Zynq QSPI IP core. This IP is used to connect the flash in
287	  4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel.
288
289config ZYNQMP_GQSPI
290	bool "Configure ZynqMP Generic QSPI"
291	depends on ARCH_ZYNQMP || ARCH_VERSAL
292	help
293	  This option is used to enable ZynqMP QSPI controller driver which
294	  is used to communicate with qspi flash devices.
295
296endif # if DM_SPI
297
298config SOFT_SPI
299	bool "Soft SPI driver"
300	help
301	 Enable Soft SPI driver. This driver is to use GPIO simulate
302	 the SPI protocol.
303
304config MSCC_BB_SPI
305	bool "MSCC bitbang SPI driver"
306	depends on SOC_VCOREIII
307	help
308	  Enable MSCC bitbang SPI driver. This driver can be used on
309	  MSCC SOCs.
310
311config CF_SPI
312	bool "ColdFire SPI driver"
313	help
314	  Enable the ColdFire SPI driver. This driver can be used on
315	  some m68k SoCs.
316
317config FSL_ESPI
318	bool "Freescale eSPI driver"
319	help
320	  Enable the Freescale eSPI driver. This driver can be used to
321	  access the SPI interface and SPI NOR flash on platforms embedding
322	  this Freescale eSPI IP core.
323
324config FSL_QSPI
325	bool "Freescale QSPI driver"
326	imply SPI_FLASH_BAR
327	help
328	  Enable the Freescale Quad-SPI (QSPI) driver. This driver can be
329	  used to access the SPI NOR flash on platforms embedding this
330	  Freescale IP core.
331
332config DAVINCI_SPI
333	bool "Davinci & Keystone SPI driver"
334	depends on ARCH_DAVINCI || ARCH_KEYSTONE
335	help
336	  Enable the Davinci SPI driver
337
338config SH_SPI
339	bool "SuperH SPI driver"
340	help
341	  Enable the SuperH SPI controller driver. This driver can be used
342	  on various SuperH SoCs, such as SH7757.
343
344config SH_QSPI
345	bool "Renesas Quad SPI driver"
346	help
347	  Enable the Renesas Quad SPI controller driver. This driver can be
348	  used on Renesas SoCs.
349
350config TI_QSPI
351	bool "TI QSPI driver"
352	help
353	  Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
354	  This driver support spi flash single, quad and memory reads.
355
356config KIRKWOOD_SPI
357	bool "Marvell Kirkwood SPI Driver"
358	help
359	  Enable support for SPI on various Marvell SoCs, such as
360	  Kirkwood and Armada 375.
361
362config LPC32XX_SSP
363	bool "LPC32XX SPI Driver"
364	help
365	  Enable support for SPI on LPC32xx
366
367config MPC8XXX_SPI
368	bool "MPC8XXX SPI Driver"
369	help
370	  Enable support for SPI on the MPC8XXX PowerPC SoCs.
371
372config MXC_SPI
373	bool "MXC SPI Driver"
374	help
375	  Enable the MXC SPI controller driver. This driver can be used
376	  on various i.MX SoCs such as i.MX31/35/51/6/7.
377
378config MXS_SPI
379	bool "MXS SPI Driver"
380	help
381	  Enable the MXS SPI controller driver. This driver can be used
382	  on the i.MX23 and i.MX28 SoCs.
383
384config OMAP3_SPI
385	bool "McSPI driver for OMAP"
386	help
387	  SPI master controller for OMAP24XX and later Multichannel SPI
388	  (McSPI). This driver be used to access SPI chips on platforms
389	  embedding this OMAP3 McSPI IP core.
390
391endif # menu "SPI Support"
392