1menu "SPI Support" 2 3config DM_SPI 4 bool "Enable Driver Model for SPI drivers" 5 depends on DM 6 help 7 Enable driver model for SPI. The SPI slave interface 8 (spi_setup_slave(), spi_xfer(), etc.) is then implemented by 9 the SPI uclass. Drivers provide methods to access the SPI 10 buses that they control. The uclass interface is defined in 11 include/spi.h. The existing spi_slave structure is attached 12 as 'parent data' to every slave on each bus. Slaves 13 typically use driver-private data instead of extending the 14 spi_slave structure. 15 16if DM_SPI 17 18config ALTERA_SPI 19 bool "Altera SPI driver" 20 help 21 Enable the Altera SPI driver. This driver can be used to 22 access the SPI NOR flash on platforms embedding this Altera 23 IP core. Please find details on the "Embedded Peripherals IP 24 User Guide" of Altera. 25 26config ATH79_SPI 27 bool "Atheros SPI driver" 28 depends on ARCH_ATH79 29 help 30 Enable the Atheros ar7xxx/ar9xxx SoC SPI driver, it was used 31 to access SPI NOR flash and other SPI peripherals. This driver 32 uses driver model and requires a device tree binding to operate. 33 please refer to doc/device-tree-bindings/spi/spi-ath79.txt. 34 35config ATMEL_SPI 36 bool "Atmel SPI driver" 37 depends on ARCH_AT91 38 help 39 This enables driver for the Atmel SPI Controller, present on 40 many AT91 (ARM) chips. This driver can be used to access 41 the SPI Flash, such as AT25DF321. 42 43config CADENCE_QSPI 44 bool "Cadence QSPI driver" 45 help 46 Enable the Cadence Quad-SPI (QSPI) driver. This driver can be 47 used to access the SPI NOR flash on platforms embedding this 48 Cadence IP core. 49 50config DESIGNWARE_SPI 51 bool "Designware SPI driver" 52 help 53 Enable the Designware SPI driver. This driver can be used to 54 access the SPI NOR flash on platforms embedding this Designware 55 IP core. 56 57config EXYNOS_SPI 58 bool "Samsung Exynos SPI driver" 59 help 60 Enable the Samsung Exynos SPI driver. This driver can be used to 61 access the SPI NOR flash on platforms embedding this Samsung 62 Exynos IP core. 63 64config FSL_DSPI 65 bool "Freescale DSPI driver" 66 help 67 Enable the Freescale DSPI driver. This driver can be used to 68 access the SPI NOR flash and SPI Data flash on platforms embedding 69 this Freescale DSPI IP core. LS102xA and Colibri VF50/VF61 platforms 70 use this driver. 71 72config ICH_SPI 73 bool "Intel ICH SPI driver" 74 help 75 Enable the Intel ICH SPI driver. This driver can be used to 76 access the SPI NOR flash on platforms embedding this Intel 77 ICH IP core. 78 79config MVEBU_A3700_SPI 80 bool "Marvell Armada 3700 SPI driver" 81 help 82 Enable the Marvell Armada 3700 SPI driver. This driver can be 83 used to access the SPI NOR flash on platforms embedding this 84 Marvell IP core. 85 86config PIC32_SPI 87 bool "Microchip PIC32 SPI driver" 88 depends on MACH_PIC32 89 help 90 Enable the Microchip PIC32 SPI driver. This driver can be used 91 to access the SPI NOR flash, MMC-over-SPI on platforms based on 92 Microchip PIC32 family devices. 93 94config ROCKCHIP_SPI 95 bool "Rockchip SPI driver" 96 help 97 Enable the Rockchip SPI driver, used to access SPI NOR flash and 98 other SPI peripherals (such as the Chrome OS EC) on Rockchip SoCs. 99 This uses driver model and requires a device tree binding to 100 operate. 101 102config SANDBOX_SPI 103 bool "Sandbox SPI driver" 104 depends on SANDBOX && DM 105 help 106 Enable SPI support for sandbox. This is an emulation of a real SPI 107 bus. Devices can be attached to the bus using the device tree 108 which specifies the driver to use. As an example, see this device 109 tree fragment from sandbox.dts. It shows that the SPI bus has a 110 single flash device on chip select 0 which is emulated by the driver 111 for "sandbox,spi-flash", which is in drivers/mtd/spi/sandbox.c. 112 113 spi@0 { 114 #address-cells = <1>; 115 #size-cells = <0>; 116 reg = <0>; 117 compatible = "sandbox,spi"; 118 cs-gpios = <0>, <&gpio_a 0>; 119 flash@0 { 120 reg = <0>; 121 compatible = "spansion,m25p16", "sandbox,spi-flash"; 122 spi-max-frequency = <40000000>; 123 sandbox,filename = "spi.bin"; 124 }; 125 }; 126 127config STM32_QSPI 128 bool "STM32F7 QSPI driver" 129 depends on STM32F7 130 help 131 Enable the STM32F7 Quad-SPI (QSPI) driver. This driver can be 132 used to access the SPI NOR flash chips on platforms embedding 133 this ST IP core. 134 135config TEGRA114_SPI 136 bool "nVidia Tegra114 SPI driver" 137 help 138 Enable the nVidia Tegra114 SPI driver. This driver can be used to 139 access the SPI NOR flash on platforms embedding this nVidia Tegra114 140 IP core. 141 142 This controller is different than the older SoCs SPI controller and 143 also register interface get changed with this controller. 144 145config TEGRA20_SFLASH 146 bool "nVidia Tegra20 Serial Flash controller driver" 147 help 148 Enable the nVidia Tegra20 Serial Flash controller driver. This driver 149 can be used to access the SPI NOR flash on platforms embedding this 150 nVidia Tegra20 IP core. 151 152config TEGRA20_SLINK 153 bool "nVidia Tegra20/Tegra30 SLINK driver" 154 help 155 Enable the nVidia Tegra20/Tegra30 SLINK driver. This driver can 156 be used to access the SPI NOR flash on platforms embedding this 157 nVidia Tegra20/Tegra30 IP cores. 158 159config TEGRA210_QSPI 160 bool "nVidia Tegra210 QSPI driver" 161 help 162 Enable the Tegra Quad-SPI (QSPI) driver for T210. This driver 163 be used to access SPI chips on platforms embedding this 164 NVIDIA Tegra210 IP core. 165 166config XILINX_SPI 167 bool "Xilinx SPI driver" 168 help 169 Enable the Xilinx SPI driver from the Xilinx EDK. This SPI 170 controller support 8 bit SPI transfers only, with or w/o FIFO. 171 For more info on Xilinx SPI Register Definitions and Overview 172 see driver file - drivers/spi/xilinx_spi.c 173 174config ZYNQ_SPI 175 bool "Zynq SPI driver" 176 depends on ARCH_ZYNQ || ARCH_ZYNQMP 177 help 178 Enable the Zynq SPI driver. This driver can be used to 179 access the SPI NOR flash on platforms embedding this Zynq 180 SPI IP core. 181 182config ZYNQ_QSPI 183 bool "Zynq QSPI driver" 184 depends on ARCH_ZYNQ 185 help 186 Enable the Zynq Quad-SPI (QSPI) driver. This driver can be 187 used to access the SPI NOR flash on platforms embedding this 188 Zynq QSPI IP core. This IP is used to connect the flash in 189 4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel. 190 191endif # if DM_SPI 192 193config SOFT_SPI 194 bool "Soft SPI driver" 195 help 196 Enable Soft SPI driver. This driver is to use GPIO simulate 197 the SPI protocol. 198 199config FSL_ESPI 200 bool "Freescale eSPI driver" 201 help 202 Enable the Freescale eSPI driver. This driver can be used to 203 access the SPI interface and SPI NOR flash on platforms embedding 204 this Freescale eSPI IP core. 205 206config FSL_QSPI 207 bool "Freescale QSPI driver" 208 help 209 Enable the Freescale Quad-SPI (QSPI) driver. This driver can be 210 used to access the SPI NOR flash on platforms embedding this 211 Freescale IP core. 212 213config TI_QSPI 214 bool "TI QSPI driver" 215 help 216 Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms. 217 This driver support spi flash single, quad and memory reads. 218 219config MPC8XX_SPI 220 bool "MPC8XX SPI Driver" 221 depends on 8xx 222 help 223 Enable support for SPI on MPC8XX 224 225config OMAP3_SPI 226 bool "McSPI driver for OMAP" 227 help 228 SPI master controller for OMAP24XX and later Multichannel SPI 229 (McSPI). This driver be used to access SPI chips on platforms 230 embedding this OMAP3 McSPI IP core. 231 232endmenu # menu "SPI Support" 233