1 /* 2 * LPC32xx Ethernet MAC interface driver 3 * 4 * (C) Copyright 2014 DENX Software Engineering GmbH 5 * Written-by: Albert ARIBAUD - 3ADEV <albert.aribaud@3adev.fr> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #include <common.h> 11 #include <net.h> 12 #include <malloc.h> 13 #include <miiphy.h> 14 #include <asm/io.h> 15 #include <asm/errno.h> 16 #include <asm/types.h> 17 #include <asm/system.h> 18 #include <asm/byteorder.h> 19 #include <asm/arch/cpu.h> 20 #include <asm/arch/config.h> 21 22 /* 23 * Notes: 24 * 25 * 1. Unless specified otherwise, all references to tables or paragraphs 26 * are to UM10326, "LPC32x0 and LPC32x0/01 User manual". 27 * 28 * 2. Only bitfield masks/values which are actually used by the driver 29 * are defined. 30 */ 31 32 /* a single RX descriptor. The controller has an array of these */ 33 struct lpc32xx_eth_rxdesc { 34 u32 packet; /* Receive packet pointer */ 35 u32 control; /* Descriptor command status */ 36 }; 37 38 #define LPC32XX_ETH_RX_DESC_SIZE (sizeof(struct lpc32xx_eth_rxdesc)) 39 40 /* RX control bitfields/masks (see Table 330) */ 41 #define LPC32XX_ETH_RX_CTRL_SIZE_MASK 0x000007FF 42 #define LPC32XX_ETH_RX_CTRL_UNUSED 0x7FFFF800 43 #define LPC32XX_ETH_RX_CTRL_INTERRUPT 0x80000000 44 45 /* a single RX status. The controller has an array of these */ 46 struct lpc32xx_eth_rxstat { 47 u32 statusinfo; /* Transmit Descriptor status */ 48 u32 statushashcrc; /* Transmit Descriptor CRCs */ 49 }; 50 51 #define LPC32XX_ETH_RX_STAT_SIZE (sizeof(struct lpc32xx_eth_rxstat)) 52 53 /* RX statusinfo bitfields/masks (see Table 333) */ 54 #define RX_STAT_RXSIZE 0x000007FF 55 /* Helper: OR of all errors except RANGE */ 56 #define RX_STAT_ERRORS 0x1B800000 57 58 /* a single TX descriptor. The controller has an array of these */ 59 struct lpc32xx_eth_txdesc { 60 u32 packet; /* Transmit packet pointer */ 61 u32 control; /* Descriptor control */ 62 }; 63 64 #define LPC32XX_ETH_TX_DESC_SIZE (sizeof(struct lpc32xx_eth_txdesc)) 65 66 /* TX control bitfields/masks (see Table 335) */ 67 #define TX_CTRL_TXSIZE 0x000007FF 68 #define TX_CTRL_LAST 0x40000000 69 70 /* a single TX status. The controller has an array of these */ 71 struct lpc32xx_eth_txstat { 72 u32 statusinfo; /* Transmit Descriptor status */ 73 }; 74 75 #define LPC32XX_ETH_TX_STAT_SIZE (sizeof(struct lpc32xx_eth_txstat)) 76 77 /* Ethernet MAC interface registers (see Table 283) */ 78 struct lpc32xx_eth_registers { 79 /* MAC registers - 0x3106_0000 to 0x3106_01FC */ 80 u32 mac1; /* MAC configuration register 1 */ 81 u32 mac2; /* MAC configuration register 2 */ 82 u32 ipgt; /* Back-to-back Inter-Packet Gap reg. */ 83 u32 ipgr; /* Non-back-to-back IPG register */ 84 u32 clrt; /* Collision Window / Retry register */ 85 u32 maxf; /* Maximum Frame register */ 86 u32 supp; /* Phy Support register */ 87 u32 test; 88 u32 mcfg; /* MII management configuration reg. */ 89 u32 mcmd; /* MII management command register */ 90 u32 madr; /* MII management address register */ 91 u32 mwtd; /* MII management wite data register */ 92 u32 mrdd; /* MII management read data register */ 93 u32 mind; /* MII management indicators register */ 94 u32 reserved1[2]; 95 u32 sa0; /* Station address register 0 */ 96 u32 sa1; /* Station address register 1 */ 97 u32 sa2; /* Station address register 2 */ 98 u32 reserved2[45]; 99 /* Control registers */ 100 u32 command; 101 u32 status; 102 u32 rxdescriptor; 103 u32 rxstatus; 104 u32 rxdescriptornumber; /* actually, number MINUS ONE */ 105 u32 rxproduceindex; /* head of rx desc fifo */ 106 u32 rxconsumeindex; /* tail of rx desc fifo */ 107 u32 txdescriptor; 108 u32 txstatus; 109 u32 txdescriptornumber; /* actually, number MINUS ONE */ 110 u32 txproduceindex; /* head of rx desc fifo */ 111 u32 txconsumeindex; /* tail of rx desc fifo */ 112 u32 reserved3[10]; 113 u32 tsv0; /* Transmit status vector register 0 */ 114 u32 tsv1; /* Transmit status vector register 1 */ 115 u32 rsv; /* Receive status vector register */ 116 u32 reserved4[3]; 117 u32 flowcontrolcounter; 118 u32 flowcontrolstatus; 119 u32 reserved5[34]; 120 /* RX filter registers - 0x3106_0200 to 0x3106_0FDC */ 121 u32 rxfilterctrl; 122 u32 rxfilterwolstatus; 123 u32 rxfilterwolclear; 124 u32 reserved6; 125 u32 hashfilterl; 126 u32 hashfilterh; 127 u32 reserved7[882]; 128 /* Module control registers - 0x3106_0FE0 to 0x3106_0FF8 */ 129 u32 intstatus; /* Interrupt status register */ 130 u32 intenable; 131 u32 intclear; 132 u32 intset; 133 u32 reserved8; 134 u32 powerdown; 135 u32 reserved9; 136 }; 137 138 /* MAC1 register bitfields/masks and offsets (see Table 283) */ 139 #define MAC1_RECV_ENABLE 0x00000001 140 #define MAC1_PASS_ALL_RX_FRAMES 0x00000002 141 #define MAC1_SOFT_RESET 0x00008000 142 /* Helper: general reset */ 143 #define MAC1_RESETS 0x0000CF00 144 145 /* MAC2 register bitfields/masks and offsets (see Table 284) */ 146 #define MAC2_FULL_DUPLEX 0x00000001 147 #define MAC2_CRC_ENABLE 0x00000010 148 #define MAC2_PAD_CRC_ENABLE 0x00000020 149 150 /* SUPP register bitfields/masks and offsets (see Table 290) */ 151 #define SUPP_SPEED 0x00000100 152 153 /* MCFG register bitfields/masks and offsets (see Table 292) */ 154 #define MCFG_RESET_MII_MGMT 0x00008000 155 /* divide clock by 28 (see Table 293) */ 156 #define MCFG_CLOCK_SELECT_DIV28 0x0000001C 157 158 /* MADR register bitfields/masks and offsets (see Table 295) */ 159 #define MADR_REG_MASK 0x0000001F 160 #define MADR_PHY_MASK 0x00001F00 161 #define MADR_REG_OFFSET 0 162 #define MADR_PHY_OFFSET 8 163 164 /* MIND register bitfields/masks (see Table 298) */ 165 #define MIND_BUSY 0x00000001 166 167 /* COMMAND register bitfields/masks and offsets (see Table 283) */ 168 #define COMMAND_RXENABLE 0x00000001 169 #define COMMAND_TXENABLE 0x00000002 170 #define COMMAND_PASSRUNTFRAME 0x00000040 171 #define COMMAND_RMII 0x00000200 172 #define COMMAND_FULL_DUPLEX 0x00000400 173 /* Helper: general reset */ 174 #define COMMAND_RESETS 0x00000038 175 176 /* STATUS register bitfields/masks and offsets (see Table 283) */ 177 #define STATUS_RXSTATUS 0x00000001 178 #define STATUS_TXSTATUS 0x00000002 179 180 /* RXFILTERCTRL register bitfields/masks (see Table 319) */ 181 #define RXFILTERCTRL_ACCEPTBROADCAST 0x00000002 182 #define RXFILTERCTRL_ACCEPTPERFECT 0x00000020 183 184 /* Buffers and descriptors */ 185 186 #define ATTRS(n) __aligned(n) 187 188 #define TX_BUF_COUNT 4 189 #define RX_BUF_COUNT 4 190 191 struct lpc32xx_eth_buffers { 192 ATTRS(4) struct lpc32xx_eth_txdesc tx_desc[TX_BUF_COUNT]; 193 ATTRS(4) struct lpc32xx_eth_txstat tx_stat[TX_BUF_COUNT]; 194 ATTRS(PKTALIGN) u8 tx_buf[TX_BUF_COUNT*PKTSIZE_ALIGN]; 195 ATTRS(4) struct lpc32xx_eth_rxdesc rx_desc[RX_BUF_COUNT]; 196 ATTRS(8) struct lpc32xx_eth_rxstat rx_stat[RX_BUF_COUNT]; 197 ATTRS(PKTALIGN) u8 rx_buf[RX_BUF_COUNT*PKTSIZE_ALIGN]; 198 }; 199 200 /* port device data struct */ 201 struct lpc32xx_eth_device { 202 struct eth_device dev; 203 struct lpc32xx_eth_registers *regs; 204 struct lpc32xx_eth_buffers *bufs; 205 bool phy_rmii; 206 }; 207 208 #define LPC32XX_ETH_DEVICE_SIZE (sizeof(struct lpc32xx_eth_device)) 209 210 /* generic macros */ 211 #define to_lpc32xx_eth(_d) container_of(_d, struct lpc32xx_eth_device, dev) 212 213 /* timeout for MII polling */ 214 #define MII_TIMEOUT 10000000 215 216 /* limits for PHY and register addresses */ 217 #define MII_MAX_REG (MADR_REG_MASK >> MADR_REG_OFFSET) 218 219 #define MII_MAX_PHY (MADR_PHY_MASK >> MADR_PHY_OFFSET) 220 221 DECLARE_GLOBAL_DATA_PTR; 222 223 #if defined(CONFIG_PHYLIB) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII) 224 /* 225 * mii_reg_read - miiphy_read callback function. 226 * 227 * Returns 16bit phy register value, or 0xffff on error 228 */ 229 static int mii_reg_read(struct mii_dev *bus, int phy_adr, int devad, 230 int reg_ofs) 231 { 232 u16 data = 0; 233 struct eth_device *dev = eth_get_dev_by_name(bus->name); 234 struct lpc32xx_eth_device *dlpc32xx_eth = to_lpc32xx_eth(dev); 235 struct lpc32xx_eth_registers *regs = dlpc32xx_eth->regs; 236 u32 mind_reg; 237 u32 timeout; 238 239 /* check parameters */ 240 if (phy_adr > MII_MAX_PHY) { 241 printf("%s:%u: Invalid PHY address %d\n", 242 __func__, __LINE__, phy_adr); 243 return -EFAULT; 244 } 245 if (reg_ofs > MII_MAX_REG) { 246 printf("%s:%u: Invalid register offset %d\n", 247 __func__, __LINE__, reg_ofs); 248 return -EFAULT; 249 } 250 251 /* write the phy and reg addressse into the MII address reg */ 252 writel((phy_adr << MADR_PHY_OFFSET) | (reg_ofs << MADR_REG_OFFSET), 253 ®s->madr); 254 255 /* write 1 to the MII command register to cause a read */ 256 writel(1, ®s->mcmd); 257 258 /* wait till the MII is not busy */ 259 timeout = MII_TIMEOUT; 260 do { 261 /* read MII indicators register */ 262 mind_reg = readl(®s->mind); 263 if (--timeout == 0) 264 break; 265 } while (mind_reg & MIND_BUSY); 266 267 /* write 0 to the MII command register to finish the read */ 268 writel(0, ®s->mcmd); 269 270 if (timeout == 0) { 271 printf("%s:%u: MII busy timeout\n", __func__, __LINE__); 272 return -EFAULT; 273 } 274 275 data = (u16) readl(®s->mrdd); 276 277 debug("%s:(adr %d, off %d) => %04x\n", __func__, phy_adr, 278 reg_ofs, data); 279 280 return data; 281 } 282 283 /* 284 * mii_reg_write - imiiphy_write callback function. 285 * 286 * Returns 0 if write succeed, -EINVAL on bad parameters 287 * -ETIME on timeout 288 */ 289 static int mii_reg_write(struct mii_dev *bus, int phy_adr, int devad, 290 int reg_ofs, u16 data) 291 { 292 struct eth_device *dev = eth_get_dev_by_name(bus->name); 293 struct lpc32xx_eth_device *dlpc32xx_eth = to_lpc32xx_eth(dev); 294 struct lpc32xx_eth_registers *regs = dlpc32xx_eth->regs; 295 u32 mind_reg; 296 u32 timeout; 297 298 /* check parameters */ 299 if (phy_adr > MII_MAX_PHY) { 300 printf("%s:%u: Invalid PHY address %d\n", 301 __func__, __LINE__, phy_adr); 302 return -EFAULT; 303 } 304 if (reg_ofs > MII_MAX_REG) { 305 printf("%s:%u: Invalid register offset %d\n", 306 __func__, __LINE__, reg_ofs); 307 return -EFAULT; 308 } 309 310 /* write the phy and reg addressse into the MII address reg */ 311 writel((phy_adr << MADR_PHY_OFFSET) | (reg_ofs << MADR_REG_OFFSET), 312 ®s->madr); 313 314 /* write data to the MII write register */ 315 writel(data, ®s->mwtd); 316 317 /* wait till the MII is not busy */ 318 timeout = MII_TIMEOUT; 319 do { 320 /* read MII indicators register */ 321 mind_reg = readl(®s->mind); 322 if (--timeout == 0) 323 break; 324 } while (mind_reg & MIND_BUSY); 325 326 if (timeout == 0) { 327 printf("%s:%u: MII busy timeout\n", __func__, 328 __LINE__); 329 return -EFAULT; 330 } 331 332 /*debug("%s:(adr %d, off %d) <= %04x\n", __func__, phy_adr, 333 reg_ofs, data);*/ 334 335 return 0; 336 } 337 #endif 338 339 /* 340 * Provide default Ethernet buffers base address if target did not. 341 * Locate buffers in SRAM at 0x00001000 to avoid cache issues and 342 * maximize throughput. 343 */ 344 #if !defined(CONFIG_LPC32XX_ETH_BUFS_BASE) 345 #define CONFIG_LPC32XX_ETH_BUFS_BASE 0x00001000 346 #endif 347 348 static struct lpc32xx_eth_device lpc32xx_eth = { 349 .regs = (struct lpc32xx_eth_registers *)LPC32XX_ETH_BASE, 350 .bufs = (struct lpc32xx_eth_buffers *)CONFIG_LPC32XX_ETH_BUFS_BASE, 351 #if defined(CONFIG_RMII) 352 .phy_rmii = true, 353 #endif 354 }; 355 356 #define TX_TIMEOUT 10000 357 358 static int lpc32xx_eth_send(struct eth_device *dev, void *dataptr, int datasize) 359 { 360 struct lpc32xx_eth_device *lpc32xx_eth_device = 361 container_of(dev, struct lpc32xx_eth_device, dev); 362 struct lpc32xx_eth_registers *regs = lpc32xx_eth_device->regs; 363 struct lpc32xx_eth_buffers *bufs = lpc32xx_eth_device->bufs; 364 int timeout, tx_index; 365 366 /* time out if transmit descriptor array remains full too long */ 367 timeout = TX_TIMEOUT; 368 while ((readl(®s->status) & STATUS_TXSTATUS) && 369 (readl(®s->txconsumeindex) 370 == readl(®s->txproduceindex))) { 371 if (timeout-- == 0) 372 return -1; 373 } 374 375 /* determine next transmit packet index to use */ 376 tx_index = readl(®s->txproduceindex); 377 378 /* set up transmit packet */ 379 writel((u32)dataptr, &bufs->tx_desc[tx_index].packet); 380 writel(TX_CTRL_LAST | ((datasize - 1) & TX_CTRL_TXSIZE), 381 &bufs->tx_desc[tx_index].control); 382 writel(0, &bufs->tx_stat[tx_index].statusinfo); 383 384 /* pass transmit packet to DMA engine */ 385 tx_index = (tx_index + 1) % TX_BUF_COUNT; 386 writel(tx_index, ®s->txproduceindex); 387 388 /* transmission succeeded */ 389 return 0; 390 } 391 392 #define RX_TIMEOUT 1000000 393 394 static int lpc32xx_eth_recv(struct eth_device *dev) 395 { 396 struct lpc32xx_eth_device *lpc32xx_eth_device = 397 container_of(dev, struct lpc32xx_eth_device, dev); 398 struct lpc32xx_eth_registers *regs = lpc32xx_eth_device->regs; 399 struct lpc32xx_eth_buffers *bufs = lpc32xx_eth_device->bufs; 400 int timeout, rx_index; 401 402 /* time out if receive descriptor array remains empty too long */ 403 timeout = RX_TIMEOUT; 404 while (readl(®s->rxproduceindex) == readl(®s->rxconsumeindex)) { 405 if (timeout-- == 0) 406 return -1; 407 } 408 409 /* determine next receive packet index to use */ 410 rx_index = readl(®s->rxconsumeindex); 411 412 /* if data was valid, pass it on */ 413 if (!(bufs->rx_stat[rx_index].statusinfo & RX_STAT_ERRORS)) { 414 net_process_received_packet( 415 &(bufs->rx_buf[rx_index * PKTSIZE_ALIGN]), 416 (bufs->rx_stat[rx_index].statusinfo 417 & RX_STAT_RXSIZE) + 1); 418 } 419 420 /* pass receive slot back to DMA engine */ 421 rx_index = (rx_index + 1) % RX_BUF_COUNT; 422 writel(rx_index, ®s->rxconsumeindex); 423 424 /* reception successful */ 425 return 0; 426 } 427 428 static int lpc32xx_eth_write_hwaddr(struct eth_device *dev) 429 { 430 struct lpc32xx_eth_device *lpc32xx_eth_device = 431 container_of(dev, struct lpc32xx_eth_device, dev); 432 struct lpc32xx_eth_registers *regs = lpc32xx_eth_device->regs; 433 434 /* Save station address */ 435 writel((unsigned long) (dev->enetaddr[0] | 436 (dev->enetaddr[1] << 8)), ®s->sa2); 437 writel((unsigned long) (dev->enetaddr[2] | 438 (dev->enetaddr[3] << 8)), ®s->sa1); 439 writel((unsigned long) (dev->enetaddr[4] | 440 (dev->enetaddr[5] << 8)), ®s->sa0); 441 442 return 0; 443 } 444 445 static int lpc32xx_eth_init(struct eth_device *dev) 446 { 447 struct lpc32xx_eth_device *lpc32xx_eth_device = 448 container_of(dev, struct lpc32xx_eth_device, dev); 449 struct lpc32xx_eth_registers *regs = lpc32xx_eth_device->regs; 450 struct lpc32xx_eth_buffers *bufs = lpc32xx_eth_device->bufs; 451 int index; 452 453 /* Initial MAC initialization */ 454 writel(MAC1_PASS_ALL_RX_FRAMES, ®s->mac1); 455 writel(MAC2_PAD_CRC_ENABLE | MAC2_CRC_ENABLE, ®s->mac2); 456 writel(PKTSIZE_ALIGN, ®s->maxf); 457 458 /* Retries: 15 (0xF). Collision window: 57 (0x37). */ 459 writel(0x370F, ®s->clrt); 460 461 /* Set IP gap pt 2 to default 0x12 but pt 1 to non-default 0 */ 462 writel(0x0012, ®s->ipgr); 463 464 /* pass runt (smaller than 64 bytes) frames */ 465 if (lpc32xx_eth_device->phy_rmii) 466 writel(COMMAND_PASSRUNTFRAME | COMMAND_RMII, ®s->command); 467 else 468 writel(COMMAND_PASSRUNTFRAME, ®s->command); 469 470 /* Configure Full/Half Duplex mode */ 471 if (miiphy_duplex(dev->name, CONFIG_PHY_ADDR) == FULL) { 472 setbits_le32(®s->mac2, MAC2_FULL_DUPLEX); 473 setbits_le32(®s->command, COMMAND_FULL_DUPLEX); 474 writel(0x15, ®s->ipgt); 475 } else { 476 writel(0x12, ®s->ipgt); 477 } 478 479 /* Configure 100MBit/10MBit mode */ 480 if (miiphy_speed(dev->name, CONFIG_PHY_ADDR) == _100BASET) 481 writel(SUPP_SPEED, ®s->supp); 482 else 483 writel(0, ®s->supp); 484 485 /* Save station address */ 486 writel((unsigned long) (dev->enetaddr[0] | 487 (dev->enetaddr[1] << 8)), ®s->sa2); 488 writel((unsigned long) (dev->enetaddr[2] | 489 (dev->enetaddr[3] << 8)), ®s->sa1); 490 writel((unsigned long) (dev->enetaddr[4] | 491 (dev->enetaddr[5] << 8)), ®s->sa0); 492 493 /* set up transmit buffers */ 494 for (index = 0; index < TX_BUF_COUNT; index++) { 495 bufs->tx_desc[index].control = 0; 496 bufs->tx_stat[index].statusinfo = 0; 497 } 498 writel((u32)(&bufs->tx_desc), (u32 *)®s->txdescriptor); 499 writel((u32)(&bufs->tx_stat), ®s->txstatus); 500 writel(TX_BUF_COUNT-1, ®s->txdescriptornumber); 501 502 /* set up receive buffers */ 503 for (index = 0; index < RX_BUF_COUNT; index++) { 504 bufs->rx_desc[index].packet = 505 (u32) (bufs->rx_buf+index*PKTSIZE_ALIGN); 506 bufs->rx_desc[index].control = PKTSIZE_ALIGN - 1; 507 bufs->rx_stat[index].statusinfo = 0; 508 bufs->rx_stat[index].statushashcrc = 0; 509 } 510 writel((u32)(&bufs->rx_desc), ®s->rxdescriptor); 511 writel((u32)(&bufs->rx_stat), ®s->rxstatus); 512 writel(RX_BUF_COUNT-1, ®s->rxdescriptornumber); 513 514 /* Enable broadcast and matching address packets */ 515 writel(RXFILTERCTRL_ACCEPTBROADCAST | 516 RXFILTERCTRL_ACCEPTPERFECT, ®s->rxfilterctrl); 517 518 /* Clear and disable interrupts */ 519 writel(0xFFFF, ®s->intclear); 520 writel(0, ®s->intenable); 521 522 /* Enable receive and transmit mode of MAC ethernet core */ 523 setbits_le32(®s->command, COMMAND_RXENABLE | COMMAND_TXENABLE); 524 setbits_le32(®s->mac1, MAC1_RECV_ENABLE); 525 526 /* 527 * Perform a 'dummy' first send to work around Ethernet.1 528 * erratum (see ES_LPC3250 rev. 9 dated 1 June 2011). 529 * Use zeroed "index" variable as the dummy. 530 */ 531 532 index = 0; 533 lpc32xx_eth_send(dev, &index, 4); 534 535 return 0; 536 } 537 538 static int lpc32xx_eth_halt(struct eth_device *dev) 539 { 540 struct lpc32xx_eth_device *lpc32xx_eth_device = 541 container_of(dev, struct lpc32xx_eth_device, dev); 542 struct lpc32xx_eth_registers *regs = lpc32xx_eth_device->regs; 543 544 /* Reset all MAC logic */ 545 writel(MAC1_RESETS, ®s->mac1); 546 writel(COMMAND_RESETS, ®s->command); 547 /* Let reset condition settle */ 548 udelay(2000); 549 550 return 0; 551 } 552 553 #if defined(CONFIG_PHYLIB) 554 int lpc32xx_eth_phylib_init(struct eth_device *dev, int phyid) 555 { 556 struct lpc32xx_eth_device *lpc32xx_eth_device = 557 container_of(dev, struct lpc32xx_eth_device, dev); 558 struct mii_dev *bus; 559 struct phy_device *phydev; 560 int ret; 561 562 bus = mdio_alloc(); 563 if (!bus) { 564 printf("mdio_alloc failed\n"); 565 return -ENOMEM; 566 } 567 bus->read = mii_reg_read; 568 bus->write = mii_reg_write; 569 strcpy(bus->name, dev->name); 570 571 ret = mdio_register(bus); 572 if (ret) { 573 printf("mdio_register failed\n"); 574 free(bus); 575 return -ENOMEM; 576 } 577 578 if (lpc32xx_eth_device->phy_rmii) 579 phydev = phy_connect(bus, phyid, dev, PHY_INTERFACE_MODE_RMII); 580 else 581 phydev = phy_connect(bus, phyid, dev, PHY_INTERFACE_MODE_MII); 582 583 if (!phydev) { 584 printf("phy_connect failed\n"); 585 return -ENODEV; 586 } 587 588 phy_config(phydev); 589 phy_startup(phydev); 590 591 return 0; 592 } 593 #endif 594 595 int lpc32xx_eth_initialize(bd_t *bis) 596 { 597 struct eth_device *dev = &lpc32xx_eth.dev; 598 struct lpc32xx_eth_registers *regs = lpc32xx_eth.regs; 599 600 /* 601 * Set RMII management clock rate. With HCLK at 104 MHz and 602 * a divider of 28, this will be 3.72 MHz. 603 */ 604 writel(MCFG_RESET_MII_MGMT, ®s->mcfg); 605 writel(MCFG_CLOCK_SELECT_DIV28, ®s->mcfg); 606 607 /* Reset all MAC logic */ 608 writel(MAC1_RESETS, ®s->mac1); 609 writel(COMMAND_RESETS, ®s->command); 610 611 /* wait 10 ms for the whole I/F to reset */ 612 udelay(10000); 613 614 /* must be less than sizeof(dev->name) */ 615 strcpy(dev->name, "eth0"); 616 617 dev->init = (void *)lpc32xx_eth_init; 618 dev->halt = (void *)lpc32xx_eth_halt; 619 dev->send = (void *)lpc32xx_eth_send; 620 dev->recv = (void *)lpc32xx_eth_recv; 621 dev->write_hwaddr = (void *)lpc32xx_eth_write_hwaddr; 622 623 /* Release SOFT reset to let MII talk to PHY */ 624 clrbits_le32(®s->mac1, MAC1_SOFT_RESET); 625 626 /* register driver before talking to phy */ 627 eth_register(dev); 628 629 #if defined(CONFIG_PHYLIB) 630 lpc32xx_eth_phylib_init(dev, CONFIG_PHY_ADDR); 631 #elif defined(CONFIG_MII) || defined(CONFIG_CMD_MII) 632 int retval; 633 struct mii_dev *mdiodev = mdio_alloc(); 634 if (!mdiodev) 635 return -ENOMEM; 636 strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN); 637 mdiodev->read = mii_reg_read; 638 mdiodev->write = mii_reg_write; 639 640 retval = mdio_register(mdiodev); 641 if (retval < 0) 642 return retval; 643 #endif 644 645 return 0; 646 } 647