1 /* 2 * LPC32xx Ethernet MAC interface driver 3 * 4 * (C) Copyright 2014 DENX Software Engineering GmbH 5 * Written-by: Albert ARIBAUD - 3ADEV <albert.aribaud@3adev.fr> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #include <common.h> 11 #include <net.h> 12 #include <malloc.h> 13 #include <miiphy.h> 14 #include <asm/io.h> 15 #include <asm/errno.h> 16 #include <asm/types.h> 17 #include <asm/system.h> 18 #include <asm/byteorder.h> 19 #include <asm/arch/cpu.h> 20 #include <asm/arch/config.h> 21 22 /* 23 * Notes: 24 * 25 * 1. Unless specified otherwise, all references to tables or paragraphs 26 * are to UM10326, "LPC32x0 and LPC32x0/01 User manual". 27 * 28 * 2. Only bitfield masks/values which are actually used by the driver 29 * are defined. 30 */ 31 32 /* a single RX descriptor. The controller has an array of these */ 33 struct lpc32xx_eth_rxdesc { 34 u32 packet; /* Receive packet pointer */ 35 u32 control; /* Descriptor command status */ 36 }; 37 38 #define LPC32XX_ETH_RX_DESC_SIZE (sizeof(struct lpc32xx_eth_rxdesc)) 39 40 /* RX control bitfields/masks (see Table 330) */ 41 #define LPC32XX_ETH_RX_CTRL_SIZE_MASK 0x000007FF 42 #define LPC32XX_ETH_RX_CTRL_UNUSED 0x7FFFF800 43 #define LPC32XX_ETH_RX_CTRL_INTERRUPT 0x80000000 44 45 /* a single RX status. The controller has an array of these */ 46 struct lpc32xx_eth_rxstat { 47 u32 statusinfo; /* Transmit Descriptor status */ 48 u32 statushashcrc; /* Transmit Descriptor CRCs */ 49 }; 50 51 #define LPC32XX_ETH_RX_STAT_SIZE (sizeof(struct lpc32xx_eth_rxstat)) 52 53 /* RX statusinfo bitfields/masks (see Table 333) */ 54 #define RX_STAT_RXSIZE 0x000007FF 55 /* Helper: OR of all errors except RANGE */ 56 #define RX_STAT_ERRORS 0x1B800000 57 58 /* a single TX descriptor. The controller has an array of these */ 59 struct lpc32xx_eth_txdesc { 60 u32 packet; /* Transmit packet pointer */ 61 u32 control; /* Descriptor control */ 62 }; 63 64 #define LPC32XX_ETH_TX_DESC_SIZE (sizeof(struct lpc32xx_eth_txdesc)) 65 66 /* TX control bitfields/masks (see Table 335) */ 67 #define TX_CTRL_TXSIZE 0x000007FF 68 #define TX_CTRL_LAST 0x40000000 69 70 /* a single TX status. The controller has an array of these */ 71 struct lpc32xx_eth_txstat { 72 u32 statusinfo; /* Transmit Descriptor status */ 73 }; 74 75 #define LPC32XX_ETH_TX_STAT_SIZE (sizeof(struct lpc32xx_eth_txstat)) 76 77 /* Ethernet MAC interface registers (see Table 283) */ 78 struct lpc32xx_eth_registers { 79 /* MAC registers - 0x3106_0000 to 0x3106_01FC */ 80 u32 mac1; /* MAC configuration register 1 */ 81 u32 mac2; /* MAC configuration register 2 */ 82 u32 ipgt; /* Back-to-back Inter-Packet Gap reg. */ 83 u32 ipgr; /* Non-back-to-back IPG register */ 84 u32 clrt; /* Collision Window / Retry register */ 85 u32 maxf; /* Maximum Frame register */ 86 u32 supp; /* Phy Support register */ 87 u32 test; 88 u32 mcfg; /* MII management configuration reg. */ 89 u32 mcmd; /* MII management command register */ 90 u32 madr; /* MII management address register */ 91 u32 mwtd; /* MII management wite data register */ 92 u32 mrdd; /* MII management read data register */ 93 u32 mind; /* MII management indicators register */ 94 u32 reserved1[2]; 95 u32 sa0; /* Station address register 0 */ 96 u32 sa1; /* Station address register 1 */ 97 u32 sa2; /* Station address register 2 */ 98 u32 reserved2[45]; 99 /* Control registers */ 100 u32 command; 101 u32 status; 102 u32 rxdescriptor; 103 u32 rxstatus; 104 u32 rxdescriptornumber; /* actually, number MINUS ONE */ 105 u32 rxproduceindex; /* head of rx desc fifo */ 106 u32 rxconsumeindex; /* tail of rx desc fifo */ 107 u32 txdescriptor; 108 u32 txstatus; 109 u32 txdescriptornumber; /* actually, number MINUS ONE */ 110 u32 txproduceindex; /* head of rx desc fifo */ 111 u32 txconsumeindex; /* tail of rx desc fifo */ 112 u32 reserved3[10]; 113 u32 tsv0; /* Transmit status vector register 0 */ 114 u32 tsv1; /* Transmit status vector register 1 */ 115 u32 rsv; /* Receive status vector register */ 116 u32 reserved4[3]; 117 u32 flowcontrolcounter; 118 u32 flowcontrolstatus; 119 u32 reserved5[34]; 120 /* RX filter registers - 0x3106_0200 to 0x3106_0FDC */ 121 u32 rxfilterctrl; 122 u32 rxfilterwolstatus; 123 u32 rxfilterwolclear; 124 u32 reserved6; 125 u32 hashfilterl; 126 u32 hashfilterh; 127 u32 reserved7[882]; 128 /* Module control registers - 0x3106_0FE0 to 0x3106_0FF8 */ 129 u32 intstatus; /* Interrupt status register */ 130 u32 intenable; 131 u32 intclear; 132 u32 intset; 133 u32 reserved8; 134 u32 powerdown; 135 u32 reserved9; 136 }; 137 138 /* MAC1 register bitfields/masks and offsets (see Table 283) */ 139 #define MAC1_RECV_ENABLE 0x00000001 140 #define MAC1_PASS_ALL_RX_FRAMES 0x00000002 141 #define MAC1_SOFT_RESET 0x00008000 142 /* Helper: general reset */ 143 #define MAC1_RESETS 0x0000CF00 144 145 /* MAC2 register bitfields/masks and offsets (see Table 284) */ 146 #define MAC2_FULL_DUPLEX 0x00000001 147 #define MAC2_CRC_ENABLE 0x00000010 148 #define MAC2_PAD_CRC_ENABLE 0x00000020 149 150 /* SUPP register bitfields/masks and offsets (see Table 290) */ 151 #define SUPP_SPEED 0x00000100 152 153 /* MCFG register bitfields/masks and offsets (see Table 292) */ 154 #define MCFG_CLOCK_SELECT_MASK 0x0000001C 155 /* divide clock by 28 (see Table 293) */ 156 #define MCFG_CLOCK_SELECT_DIV28 0x0000001C 157 158 /* MADR register bitfields/masks and offsets (see Table 295) */ 159 #define MADR_REG_MASK 0x0000001F 160 #define MADR_PHY_MASK 0x00001F00 161 #define MADR_REG_OFFSET 0 162 #define MADR_PHY_OFFSET 8 163 164 /* MIND register bitfields/masks (see Table 298) */ 165 #define MIND_BUSY 0x00000001 166 167 /* COMMAND register bitfields/masks and offsets (see Table 283) */ 168 #define COMMAND_RXENABLE 0x00000001 169 #define COMMAND_TXENABLE 0x00000002 170 #define COMMAND_PASSRUNTFRAME 0x00000040 171 #define COMMAND_FULL_DUPLEX 0x00000400 172 /* Helper: general reset */ 173 #define COMMAND_RESETS 0x0000001C 174 175 /* STATUS register bitfields/masks and offsets (see Table 283) */ 176 #define STATUS_RXSTATUS 0x00000001 177 #define STATUS_TXSTATUS 0x00000002 178 179 /* RXFILTERCTRL register bitfields/masks (see Table 319) */ 180 #define RXFILTERCTRL_ACCEPTBROADCAST 0x00000002 181 #define RXFILTERCTRL_ACCEPTPERFECT 0x00000020 182 183 /* Buffers and descriptors */ 184 185 #define ATTRS(n) __aligned(n) 186 187 #define TX_BUF_COUNT 4 188 #define RX_BUF_COUNT 4 189 190 struct lpc32xx_eth_buffers { 191 ATTRS(4) struct lpc32xx_eth_txdesc tx_desc[TX_BUF_COUNT]; 192 ATTRS(4) struct lpc32xx_eth_txstat tx_stat[TX_BUF_COUNT]; 193 ATTRS(PKTALIGN) u8 tx_buf[TX_BUF_COUNT*PKTSIZE_ALIGN]; 194 ATTRS(4) struct lpc32xx_eth_rxdesc rx_desc[RX_BUF_COUNT]; 195 ATTRS(8) struct lpc32xx_eth_rxstat rx_stat[RX_BUF_COUNT]; 196 ATTRS(PKTALIGN) u8 rx_buf[RX_BUF_COUNT*PKTSIZE_ALIGN]; 197 }; 198 199 /* port device data struct */ 200 struct lpc32xx_eth_device { 201 struct eth_device dev; 202 struct lpc32xx_eth_registers *regs; 203 struct lpc32xx_eth_buffers *bufs; 204 }; 205 206 #define LPC32XX_ETH_DEVICE_SIZE (sizeof(struct lpc32xx_eth_device)) 207 208 /* generic macros */ 209 #define to_lpc32xx_eth(_d) container_of(_d, struct lpc32xx_eth_device, dev) 210 211 /* timeout for MII polling */ 212 #define MII_TIMEOUT 10000000 213 214 /* limits for PHY and register addresses */ 215 #define MII_MAX_REG (MADR_REG_MASK >> MADR_REG_OFFSET) 216 217 #define MII_MAX_PHY (MADR_PHY_MASK >> MADR_PHY_OFFSET) 218 219 DECLARE_GLOBAL_DATA_PTR; 220 221 #if defined(CONFIG_PHYLIB) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII) 222 /* 223 * mii_reg_read - miiphy_read callback function. 224 * 225 * Returns 16bit phy register value, or 0xffff on error 226 */ 227 static int mii_reg_read(const char *devname, u8 phy_adr, u8 reg_ofs, u16 *data) 228 { 229 struct eth_device *dev = eth_get_dev_by_name(devname); 230 struct lpc32xx_eth_device *dlpc32xx_eth = to_lpc32xx_eth(dev); 231 struct lpc32xx_eth_registers *regs = dlpc32xx_eth->regs; 232 u32 mind_reg; 233 u32 timeout; 234 235 /* check parameters */ 236 if (phy_adr > MII_MAX_PHY) { 237 printf("%s:%u: Invalid PHY address %d\n", 238 __func__, __LINE__, phy_adr); 239 return -EFAULT; 240 } 241 if (reg_ofs > MII_MAX_REG) { 242 printf("%s:%u: Invalid register offset %d\n", 243 __func__, __LINE__, reg_ofs); 244 return -EFAULT; 245 } 246 247 /* write the phy and reg addressse into the MII address reg */ 248 writel((phy_adr << MADR_PHY_OFFSET) | (reg_ofs << MADR_REG_OFFSET), 249 ®s->madr); 250 251 /* write 1 to the MII command register to cause a read */ 252 writel(1, ®s->mcmd); 253 254 /* wait till the MII is not busy */ 255 timeout = MII_TIMEOUT; 256 do { 257 /* read MII indicators register */ 258 mind_reg = readl(®s->mind); 259 if (--timeout == 0) 260 break; 261 } while (mind_reg & MIND_BUSY); 262 263 /* write 0 to the MII command register to finish the read */ 264 writel(0, ®s->mcmd); 265 266 if (timeout == 0) { 267 printf("%s:%u: MII busy timeout\n", __func__, __LINE__); 268 return -EFAULT; 269 } 270 271 *data = (u16) readl(®s->mrdd); 272 273 debug("%s:(adr %d, off %d) => %04x\n", __func__, phy_adr, 274 reg_ofs, *data); 275 276 return 0; 277 } 278 279 /* 280 * mii_reg_write - imiiphy_write callback function. 281 * 282 * Returns 0 if write succeed, -EINVAL on bad parameters 283 * -ETIME on timeout 284 */ 285 static int mii_reg_write(const char *devname, u8 phy_adr, u8 reg_ofs, u16 data) 286 { 287 struct eth_device *dev = eth_get_dev_by_name(devname); 288 struct lpc32xx_eth_device *dlpc32xx_eth = to_lpc32xx_eth(dev); 289 struct lpc32xx_eth_registers *regs = dlpc32xx_eth->regs; 290 u32 mind_reg; 291 u32 timeout; 292 293 /* check parameters */ 294 if (phy_adr > MII_MAX_PHY) { 295 printf("%s:%u: Invalid PHY address %d\n", 296 __func__, __LINE__, phy_adr); 297 return -EFAULT; 298 } 299 if (reg_ofs > MII_MAX_REG) { 300 printf("%s:%u: Invalid register offset %d\n", 301 __func__, __LINE__, reg_ofs); 302 return -EFAULT; 303 } 304 305 /* wait till the MII is not busy */ 306 timeout = MII_TIMEOUT; 307 do { 308 /* read MII indicators register */ 309 mind_reg = readl(®s->mind); 310 if (--timeout == 0) 311 break; 312 } while (mind_reg & MIND_BUSY); 313 314 if (timeout == 0) { 315 printf("%s:%u: MII busy timeout\n", __func__, 316 __LINE__); 317 return -EFAULT; 318 } 319 320 /* write the phy and reg addressse into the MII address reg */ 321 writel((phy_adr << MADR_PHY_OFFSET) | (reg_ofs << MADR_REG_OFFSET), 322 ®s->madr); 323 324 /* write data to the MII write register */ 325 writel(data, ®s->mwtd); 326 327 /*debug("%s:(adr %d, off %d) <= %04x\n", __func__, phy_adr, 328 reg_ofs, data);*/ 329 330 return 0; 331 } 332 #endif 333 334 #if defined(CONFIG_PHYLIB) 335 int lpc32xx_eth_phy_read(struct mii_dev *bus, int phy_addr, int dev_addr, 336 int reg_addr) 337 { 338 u16 data; 339 int ret; 340 ret = mii_reg_read(bus->name, phy_addr, reg_addr, &data); 341 if (ret) 342 return ret; 343 return data; 344 } 345 346 int lpc32xx_eth_phy_write(struct mii_dev *bus, int phy_addr, int dev_addr, 347 int reg_addr, u16 data) 348 { 349 return mii_reg_write(bus->name, phy_addr, reg_addr, data); 350 } 351 #endif 352 353 /* 354 * Locate buffers in SRAM at 0x00001000 to avoid cache issues and 355 * maximize throughput. 356 */ 357 358 #define LPC32XX_ETH_BUFS 0x00001000 359 360 static struct lpc32xx_eth_device lpc32xx_eth = { 361 .regs = (struct lpc32xx_eth_registers *)LPC32XX_ETH_BASE, 362 .bufs = (struct lpc32xx_eth_buffers *)LPC32XX_ETH_BUFS 363 }; 364 365 #define TX_TIMEOUT 10000 366 367 static int lpc32xx_eth_send(struct eth_device *dev, void *dataptr, int datasize) 368 { 369 struct lpc32xx_eth_device *lpc32xx_eth_device = 370 container_of(dev, struct lpc32xx_eth_device, dev); 371 struct lpc32xx_eth_registers *regs = lpc32xx_eth_device->regs; 372 struct lpc32xx_eth_buffers *bufs = lpc32xx_eth_device->bufs; 373 int timeout, tx_index; 374 375 /* time out if transmit descriptor array remains full too long */ 376 timeout = TX_TIMEOUT; 377 while ((readl(®s->status) & STATUS_TXSTATUS) && 378 (readl(®s->txconsumeindex) 379 == readl(®s->txproduceindex))) { 380 if (timeout-- == 0) 381 return -1; 382 } 383 384 /* determine next transmit packet index to use */ 385 tx_index = readl(®s->txproduceindex); 386 387 /* set up transmit packet */ 388 writel((u32)dataptr, &bufs->tx_desc[tx_index].packet); 389 writel(TX_CTRL_LAST | ((datasize - 1) & TX_CTRL_TXSIZE), 390 &bufs->tx_desc[tx_index].control); 391 writel(0, &bufs->tx_stat[tx_index].statusinfo); 392 393 /* pass transmit packet to DMA engine */ 394 tx_index = (tx_index + 1) % TX_BUF_COUNT; 395 writel(tx_index, ®s->txproduceindex); 396 397 /* transmission succeeded */ 398 return 0; 399 } 400 401 #define RX_TIMEOUT 1000000 402 403 static int lpc32xx_eth_recv(struct eth_device *dev) 404 { 405 struct lpc32xx_eth_device *lpc32xx_eth_device = 406 container_of(dev, struct lpc32xx_eth_device, dev); 407 struct lpc32xx_eth_registers *regs = lpc32xx_eth_device->regs; 408 struct lpc32xx_eth_buffers *bufs = lpc32xx_eth_device->bufs; 409 int timeout, rx_index; 410 411 /* time out if receive descriptor array remains empty too long */ 412 timeout = RX_TIMEOUT; 413 while (readl(®s->rxproduceindex) == readl(®s->rxconsumeindex)) { 414 if (timeout-- == 0) 415 return -1; 416 } 417 418 /* determine next receive packet index to use */ 419 rx_index = readl(®s->rxconsumeindex); 420 421 /* if data was valid, pass it on */ 422 if (!(bufs->rx_stat[rx_index].statusinfo & RX_STAT_ERRORS)) { 423 net_process_received_packet( 424 &(bufs->rx_buf[rx_index * PKTSIZE_ALIGN]), 425 (bufs->rx_stat[rx_index].statusinfo 426 & RX_STAT_RXSIZE) + 1); 427 } 428 429 /* pass receive slot back to DMA engine */ 430 rx_index = (rx_index + 1) % RX_BUF_COUNT; 431 writel(rx_index, ®s->rxconsumeindex); 432 433 /* reception successful */ 434 return 0; 435 } 436 437 static int lpc32xx_eth_write_hwaddr(struct eth_device *dev) 438 { 439 struct lpc32xx_eth_device *lpc32xx_eth_device = 440 container_of(dev, struct lpc32xx_eth_device, dev); 441 struct lpc32xx_eth_registers *regs = lpc32xx_eth_device->regs; 442 443 /* Save station address */ 444 writel((unsigned long) (dev->enetaddr[0] | 445 (dev->enetaddr[1] << 8)), ®s->sa2); 446 writel((unsigned long) (dev->enetaddr[2] | 447 (dev->enetaddr[3] << 8)), ®s->sa1); 448 writel((unsigned long) (dev->enetaddr[4] | 449 (dev->enetaddr[5] << 8)), ®s->sa0); 450 451 return 0; 452 } 453 454 static int lpc32xx_eth_init(struct eth_device *dev) 455 { 456 struct lpc32xx_eth_device *lpc32xx_eth_device = 457 container_of(dev, struct lpc32xx_eth_device, dev); 458 struct lpc32xx_eth_registers *regs = lpc32xx_eth_device->regs; 459 struct lpc32xx_eth_buffers *bufs = lpc32xx_eth_device->bufs; 460 int index; 461 462 /* Release SOFT reset to let MII talk to PHY */ 463 clrbits_le32(®s->mac1, MAC1_SOFT_RESET); 464 465 /* Configure Full/Half Duplex mode */ 466 if (miiphy_duplex(dev->name, CONFIG_PHY_ADDR) == FULL) { 467 setbits_le32(®s->mac2, MAC2_FULL_DUPLEX); 468 setbits_le32(®s->command, COMMAND_FULL_DUPLEX); 469 writel(0x15, ®s->ipgt); 470 } else { 471 writel(0x12, ®s->ipgt); 472 } 473 474 /* Configure 100MBit/10MBit mode */ 475 if (miiphy_speed(dev->name, CONFIG_PHY_ADDR) == _100BASET) 476 writel(SUPP_SPEED, ®s->supp); 477 else 478 writel(0, ®s->supp); 479 480 /* Initial MAC initialization */ 481 writel(MAC1_PASS_ALL_RX_FRAMES, ®s->mac1); 482 writel(MAC2_PAD_CRC_ENABLE | MAC2_CRC_ENABLE, ®s->mac2); 483 writel(PKTSIZE_ALIGN, ®s->maxf); 484 485 /* Retries: 15 (0xF). Collision window: 57 (0x37). */ 486 writel(0x370F, ®s->clrt); 487 488 /* Set IP gap pt 2 to default 0x12 but pt 1 to non-default 0 */ 489 writel(0x0012, ®s->ipgr); 490 491 /* pass runt (smaller than 64 bytes) frames */ 492 writel(COMMAND_PASSRUNTFRAME, ®s->command); 493 494 /* Save station address */ 495 writel((unsigned long) (dev->enetaddr[0] | 496 (dev->enetaddr[1] << 8)), ®s->sa2); 497 writel((unsigned long) (dev->enetaddr[2] | 498 (dev->enetaddr[3] << 8)), ®s->sa1); 499 writel((unsigned long) (dev->enetaddr[4] | 500 (dev->enetaddr[5] << 8)), ®s->sa0); 501 502 /* set up transmit buffers */ 503 for (index = 0; index < TX_BUF_COUNT; index++) { 504 bufs->tx_desc[index].control = 0; 505 bufs->tx_stat[index].statusinfo = 0; 506 } 507 writel((u32)(&bufs->tx_desc), (u32 *)®s->txdescriptor); 508 writel((u32)(&bufs->tx_stat), ®s->txstatus); 509 writel(TX_BUF_COUNT-1, ®s->txdescriptornumber); 510 511 /* set up receive buffers */ 512 for (index = 0; index < RX_BUF_COUNT; index++) { 513 bufs->rx_desc[index].packet = 514 (u32) (bufs->rx_buf+index*PKTSIZE_ALIGN); 515 bufs->rx_desc[index].control = PKTSIZE_ALIGN - 1; 516 bufs->rx_stat[index].statusinfo = 0; 517 bufs->rx_stat[index].statushashcrc = 0; 518 } 519 writel((u32)(&bufs->rx_desc), ®s->rxdescriptor); 520 writel((u32)(&bufs->rx_stat), ®s->rxstatus); 521 writel(RX_BUF_COUNT-1, ®s->rxdescriptornumber); 522 523 /* Enable broadcast and matching address packets */ 524 writel(RXFILTERCTRL_ACCEPTBROADCAST | 525 RXFILTERCTRL_ACCEPTPERFECT, ®s->rxfilterctrl); 526 527 /* Clear and disable interrupts */ 528 writel(0xFFFF, ®s->intclear); 529 writel(0, ®s->intenable); 530 531 /* Enable receive and transmit mode of MAC ethernet core */ 532 setbits_le32(®s->command, COMMAND_RXENABLE | COMMAND_TXENABLE); 533 setbits_le32(®s->mac1, MAC1_RECV_ENABLE); 534 535 /* 536 * Perform a 'dummy' first send to work around Ethernet.1 537 * erratum (see ES_LPC3250 rev. 9 dated 1 June 2011). 538 * Use zeroed "index" variable as the dummy. 539 */ 540 541 index = 0; 542 lpc32xx_eth_send(dev, &index, 4); 543 544 return 0; 545 } 546 547 static int lpc32xx_eth_halt(struct eth_device *dev) 548 { 549 struct lpc32xx_eth_device *lpc32xx_eth_device = 550 container_of(dev, struct lpc32xx_eth_device, dev); 551 struct lpc32xx_eth_registers *regs = lpc32xx_eth_device->regs; 552 553 /* Reset all MAC logic */ 554 writel(MAC1_RESETS, ®s->mac1); 555 writel(COMMAND_RESETS, ®s->command); 556 /* Let reset condition settle */ 557 udelay(2000); 558 559 return 0; 560 } 561 562 #if defined(CONFIG_PHYLIB) 563 int lpc32xx_eth_phylib_init(struct eth_device *dev, int phyid) 564 { 565 struct mii_dev *bus; 566 struct phy_device *phydev; 567 int ret; 568 569 bus = mdio_alloc(); 570 if (!bus) { 571 printf("mdio_alloc failed\n"); 572 return -ENOMEM; 573 } 574 bus->read = lpc32xx_eth_phy_read; 575 bus->write = lpc32xx_eth_phy_write; 576 sprintf(bus->name, dev->name); 577 578 ret = mdio_register(bus); 579 if (ret) { 580 printf("mdio_register failed\n"); 581 free(bus); 582 return -ENOMEM; 583 } 584 585 phydev = phy_connect(bus, phyid, dev, PHY_INTERFACE_MODE_MII); 586 if (!phydev) { 587 printf("phy_connect failed\n"); 588 return -ENODEV; 589 } 590 591 phy_config(phydev); 592 phy_startup(phydev); 593 594 return 0; 595 } 596 #endif 597 598 int lpc32xx_eth_initialize(bd_t *bis) 599 { 600 struct eth_device *dev = &lpc32xx_eth.dev; 601 struct lpc32xx_eth_registers *regs = lpc32xx_eth.regs; 602 603 /* 604 * Set RMII management clock rate. With HCLK at 104 MHz and 605 * a divider of 28, this will be 3.72 MHz. 606 */ 607 608 writel(MCFG_CLOCK_SELECT_DIV28, ®s->mcfg); 609 610 /* Reset all MAC logic */ 611 writel(MAC1_RESETS, ®s->mac1); 612 writel(COMMAND_RESETS, ®s->command); 613 614 /* wait 10 ms for the whole I/F to reset */ 615 udelay(10000); 616 617 /* must be less than sizeof(dev->name) */ 618 strcpy(dev->name, "eth0"); 619 620 dev->init = (void *)lpc32xx_eth_init; 621 dev->halt = (void *)lpc32xx_eth_halt; 622 dev->send = (void *)lpc32xx_eth_send; 623 dev->recv = (void *)lpc32xx_eth_recv; 624 dev->write_hwaddr = (void *)lpc32xx_eth_write_hwaddr; 625 626 /* Release SOFT reset to let MII talk to PHY */ 627 clrbits_le32(®s->mac1, MAC1_SOFT_RESET); 628 629 /* register driver before talking to phy */ 630 eth_register(dev); 631 632 #if defined(CONFIG_PHYLIB) 633 lpc32xx_eth_phylib_init(dev, 0); 634 #elif defined(CONFIG_MII) || defined(CONFIG_CMD_MII) 635 miiphy_register(dev->name, mii_reg_read, mii_reg_write); 636 #endif 637 638 return 0; 639 } 640