1source "drivers/net/phy/Kconfig" 2 3config DM_ETH 4 bool "Enable Driver Model for Ethernet drivers" 5 depends on DM 6 help 7 Enable driver model for Ethernet. 8 9 The eth_*() interface will be implemented by the UC_ETH class 10 This is currently implemented in net/eth.c 11 Look in include/net.h for details. 12 13menuconfig NETDEVICES 14 bool "Network device support" 15 depends on NET 16 default y if DM_ETH 17 help 18 You must select Y to enable any network device support 19 Generally if you have any networking support this is a given 20 21 If unsure, say Y 22 23if NETDEVICES 24 25config PHY_GIGE 26 bool "Enable GbE PHY status parsing and configuration" 27 help 28 Enables support for parsing the status output and for 29 configuring GbE PHYs (affects the inner workings of some 30 commands and miiphyutil.c). 31 32config AG7XXX 33 bool "Atheros AG7xxx Ethernet MAC support" 34 depends on DM_ETH && ARCH_ATH79 35 select PHYLIB 36 help 37 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is 38 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips. 39 40 41config ALTERA_TSE 42 bool "Altera Triple-Speed Ethernet MAC support" 43 depends on DM_ETH 44 select PHYLIB 45 help 46 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC. 47 Please find details on the "Triple-Speed Ethernet MegaCore Function 48 Resource Center" of Altera. 49 50config BCM_SF2_ETH 51 bool "Broadcom SF2 (Starfighter2) Ethernet support" 52 select PHYLIB 53 help 54 This is an abstract framework which provides a generic interface 55 to MAC and DMA management for multiple Broadcom SoCs such as 56 Cygnus, NSP and bcm28155_ap platforms. 57 58config BCM_SF2_ETH_DEFAULT_PORT 59 int "Broadcom SF2 (Starfighter2) Ethernet default port number" 60 depends on BCM_SF2_ETH 61 default 0 62 help 63 Default port number for the Starfighter2 ethernet driver. 64 65config BCM_SF2_ETH_GMAC 66 bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support" 67 depends on BCM_SF2_ETH 68 help 69 This flag enables the ethernet support for Broadcom platforms with 70 GMAC such as Cygnus. This driver is based on the framework provided 71 by the BCM_SF2_ETH driver. 72 Say Y to any bcmcygnus based platforms. 73 74config DWC_ETH_QOS 75 bool "Synopsys DWC Ethernet QOS device support" 76 depends on DM_ETH 77 select PHYLIB 78 help 79 This driver supports the Synopsys Designware Ethernet QOS (Quality 80 Of Service) IP block. The IP supports many options for bus type, 81 clocking/reset structure, and feature list. This driver currently 82 supports the specific configuration used in NVIDIA's Tegra186 chip, 83 but should be extensible to other combinations quite easily. 84 85config E1000 86 bool "Intel PRO/1000 Gigabit Ethernet support" 87 help 88 This driver supports Intel(R) PRO/1000 gigabit ethernet family of 89 adapters. For more information on how to identify your adapter, go 90 to the Adapter & Driver ID Guide at: 91 92 <http://support.intel.com/support/network/adapter/pro100/21397.htm> 93 94config E1000_SPI_GENERIC 95 bool "Allow access to the Intel 8257x SPI bus" 96 depends on E1000 97 help 98 Allow generic access to the SPI bus on the Intel 8257x, for 99 example with the "sspi" command. 100 101config E1000_SPI 102 bool "Enable SPI bus utility code" 103 depends on E1000 104 help 105 Utility code for direct access to the SPI bus on Intel 8257x. 106 This does not do anything useful unless you set at least one 107 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC. 108 109config CMD_E1000 110 bool "Enable the e1000 command" 111 depends on E1000 112 help 113 This enables the 'e1000' management command for E1000 devices. When 114 used on devices with SPI support you can reprogram the EEPROM from 115 U-Boot. 116 117config ETH_SANDBOX 118 depends on DM_ETH && SANDBOX 119 default y 120 bool "Sandbox: Mocked Ethernet driver" 121 help 122 This driver simply responds with fake ARP replies and ping 123 replies that are used to verify network stack functionality 124 125 This driver is particularly useful in the test/dm/eth.c tests 126 127config ETH_SANDBOX_RAW 128 depends on DM_ETH && SANDBOX 129 default y 130 bool "Sandbox: Bridge to Linux Raw Sockets" 131 help 132 This driver is a bridge from the bottom of the network stack 133 in U-Boot to the RAW AF_PACKET API in Linux. This allows real 134 network traffic to be tested from within sandbox. See 135 board/sandbox/README.sandbox for more details. 136 137config ETH_DESIGNWARE 138 bool "Synopsys Designware Ethernet MAC" 139 select PHYLIB 140 help 141 This MAC is present in SoCs from various vendors. It supports 142 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to 143 provide the PHY (physical media interface). 144 145config ETHOC 146 bool "OpenCores 10/100 Mbps Ethernet MAC" 147 help 148 This MAC is present in OpenRISC and Xtensa XTFPGA boards. 149 150config FEC_MXC 151 bool "FEC Ethernet controller" 152 depends on MX5 || MX6 153 help 154 This driver supports the 10/100 Fast Ethernet controller for 155 NXP i.MX processors. 156 157config FTMAC100 158 bool "Ftmac100 Ethernet Support" 159 help 160 This MAC is present in Andestech SoCs. 161 162config MVNETA 163 bool "Marvell Armada 385 network interface support" 164 depends on ARMADA_XP || ARMADA_38X 165 select PHYLIB 166 help 167 This driver supports the network interface units in the 168 Marvell ARMADA XP and 38X SoCs 169 170config MVPP2 171 bool "Marvell Armada 375/7K/8K network interface support" 172 depends on ARMADA_375 || ARMADA_8K 173 select PHYLIB 174 help 175 This driver supports the network interface units in the 176 Marvell ARMADA 375, 7K and 8K SoCs. 177 178config MACB 179 bool "Cadence MACB/GEM Ethernet Interface" 180 depends on DM_ETH 181 select PHYLIB 182 help 183 The Cadence MACB ethernet interface is found on many Atmel 184 AT91 and SAMA5 parts. This driver also supports the Cadence 185 GEM (Gigabit Ethernet MAC) found in some ARM SoC devices. 186 Say Y to include support for the MACB/GEM chip. 187 188config PCH_GBE 189 bool "Intel Platform Controller Hub EG20T GMAC driver" 190 depends on DM_ETH && DM_PCI 191 select PHYLIB 192 help 193 This MAC is present in Intel Platform Controller Hub EG20T. It 194 supports 10/100/1000 Mbps operation. 195 196config RGMII 197 bool "Enable RGMII" 198 help 199 Enable the support of the Reduced Gigabit Media-Independent 200 Interface (RGMII). 201 202config RTL8139 203 bool "Realtek 8139 series Ethernet controller driver" 204 help 205 This driver supports Realtek 8139 series fast ethernet family of 206 PCI chipsets/adapters. 207 208config RTL8169 209 bool "Realtek 8169 series Ethernet controller driver" 210 help 211 This driver supports Realtek 8169 series gigabit ethernet family of 212 PCI/PCIe chipsets/adapters. 213 214config SUN7I_GMAC 215 bool "Enable Allwinner GMAC Ethernet support" 216 help 217 Enable the support for Sun7i GMAC Ethernet controller 218 219config SUN4I_EMAC 220 bool "Allwinner Sun4i Ethernet MAC support" 221 depends on DM_ETH 222 help 223 This driver supports the Allwinner based SUN4I Ethernet MAC. 224 225config SUN8I_EMAC 226 bool "Allwinner Sun8i Ethernet MAC support" 227 depends on DM_ETH 228 select PHYLIB 229 select PHY_GIGE 230 help 231 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC. 232 It can be found in H3/A64/A83T based SoCs and compatible with both 233 External and Internal PHYs. 234 235config XILINX_AXIEMAC 236 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) 237 select PHYLIB 238 select MII 239 bool "Xilinx AXI Ethernet" 240 help 241 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. 242 243config XILINX_EMACLITE 244 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS) 245 select PHYLIB 246 select MII 247 bool "Xilinx Ethernetlite" 248 help 249 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. 250 251config ZYNQ_GEM 252 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP) 253 select PHYLIB 254 bool "Xilinx Ethernet GEM" 255 help 256 This MAC is present in Xilinx Zynq and ZynqMP SoCs. 257 258config PIC32_ETH 259 bool "Microchip PIC32 Ethernet Support" 260 depends on DM_ETH && MACH_PIC32 261 select PHYLIB 262 help 263 This driver implements 10/100 Mbps Ethernet and MAC layer for 264 Microchip PIC32 microcontrollers. 265 266config GMAC_ROCKCHIP 267 bool "Rockchip Synopsys Designware Ethernet MAC" 268 depends on DM_ETH && ETH_DESIGNWARE 269 help 270 This driver provides Rockchip SoCs network support based on the 271 Synopsys Designware driver. 272 273config RENESAS_RAVB 274 bool "Renesas Ethernet AVB MAC" 275 depends on DM_ETH && RCAR_GEN3 276 select PHYLIB 277 help 278 This driver implements support for the Ethernet AVB block in 279 Renesas M3 and H3 SoCs. 280 281config MPC8XX_FEC 282 bool "Fast Ethernet Controller on MPC8XX" 283 depends on 8xx 284 select MII 285 help 286 This driver implements support for the Fast Ethernet Controller 287 on MPC8XX 288 289config ETHER_ON_FEC1 290 bool "FEC1" 291 depends on MPC8XX_FEC 292 default y 293 294config FEC1_PHY 295 int "FEC1 PHY" 296 depends on ETHER_ON_FEC1 297 default -1 298 help 299 Define to the hardcoded PHY address which corresponds 300 to the given FEC; i. e. 301 #define CONFIG_FEC1_PHY 4 302 means that the PHY with address 4 is connected to FEC1 303 304 When set to -1, means to probe for first available. 305 306config PHY_NORXERR 307 bool "PHY_NORXERR" 308 depends on ETHER_ON_FEC1 309 default n 310 help 311 The PHY does not have a RXERR line (RMII only). 312 (so program the FEC to ignore it). 313 314config ETHER_ON_FEC2 315 bool "FEC2" 316 depends on MPC8XX_FEC && MPC885 317 default y 318 319config FEC2_PHY 320 int "FEC2 PHY" 321 depends on ETHER_ON_FEC2 322 default -1 323 help 324 Define to the hardcoded PHY address which corresponds 325 to the given FEC; i. e. 326 #define CONFIG_FEC1_PHY 4 327 means that the PHY with address 4 is connected to FEC1 328 329 When set to -1, means to probe for first available. 330 331config FEC2_PHY_NORXERR 332 bool "PHY_NORXERR" 333 depends on ETHER_ON_FEC2 334 default n 335 help 336 The PHY does not have a RXERR line (RMII only). 337 (so program the FEC to ignore it). 338 339endif # NETDEVICES 340