1config DM_ETH 2 bool "Enable Driver Model for Ethernet drivers" 3 depends on DM 4 help 5 Enable driver model for Ethernet. 6 7 The eth_*() interface will be implemented by the UC_ETH class 8 This is currently implemented in net/eth.c 9 Look in include/net.h for details. 10 11config PHYLIB 12 bool "Ethernet PHY (physical media interface) support" 13 help 14 Enable Ethernet PHY (physical media interface) support. 15 16config RTL8211X_PHY_FORCE_MASTER 17 bool "Ethernet PHY RTL8211x: force 1000BASE-T master mode" 18 depends on PHYLIB 19 help 20 Force master mode for 1000BASE-T on RTl8211x PHYs (except for RTL8211F). 21 This can work around link stability and data corruption issues on gigabit 22 links which can occur in slave mode on certain PHYs, e.g. on the 23 RTL8211C(L). 24 25 Please note that two directly connected devices (i.e. via crossover cable) 26 will not be able to establish a link between each other if they both force 27 master mode. Multiple devices forcing master mode when connected by a 28 network switch do not pose a problem as the switch configures its affected 29 ports into slave mode. 30 31 This option only affects gigabit links. If you must establish a direct 32 connection between two devices which both force master mode, try forcing 33 the link speed to 100MBit/s. 34 35 If unsure, say N. 36 37menuconfig NETDEVICES 38 bool "Network device support" 39 depends on NET 40 default y if DM_ETH 41 help 42 You must select Y to enable any network device support 43 Generally if you have any networking support this is a given 44 45 If unsure, say Y 46 47if NETDEVICES 48 49config AG7XXX 50 bool "Atheros AG7xxx Ethernet MAC support" 51 depends on DM_ETH && ARCH_ATH79 52 select PHYLIB 53 help 54 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is 55 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips. 56 57 58config ALTERA_TSE 59 bool "Altera Triple-Speed Ethernet MAC support" 60 depends on DM_ETH 61 select PHYLIB 62 help 63 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC. 64 Please find details on the "Triple-Speed Ethernet MegaCore Function 65 Resource Center" of Altera. 66 67config E1000 68 bool "Intel PRO/1000 Gigabit Ethernet support" 69 help 70 This driver supports Intel(R) PRO/1000 gigabit ethernet family of 71 adapters. For more information on how to identify your adapter, go 72 to the Adapter & Driver ID Guide at: 73 74 <http://support.intel.com/support/network/adapter/pro100/21397.htm> 75 76config E1000_SPI_GENERIC 77 bool "Allow access to the Intel 8257x SPI bus" 78 depends on E1000 79 help 80 Allow generic access to the SPI bus on the Intel 8257x, for 81 example with the "sspi" command. 82 83config E1000_SPI 84 bool "Enable SPI bus utility code" 85 depends on E1000 86 help 87 Utility code for direct access to the SPI bus on Intel 8257x. 88 This does not do anything useful unless you set at least one 89 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC. 90 91config CMD_E1000 92 bool "Enable the e1000 command" 93 depends on E1000 94 help 95 This enables the 'e1000' management command for E1000 devices. When 96 used on devices with SPI support you can reprogram the EEPROM from 97 U-Boot. 98 99config ETH_SANDBOX 100 depends on DM_ETH && SANDBOX 101 default y 102 bool "Sandbox: Mocked Ethernet driver" 103 help 104 This driver simply responds with fake ARP replies and ping 105 replies that are used to verify network stack functionality 106 107 This driver is particularly useful in the test/dm/eth.c tests 108 109config ETH_SANDBOX_RAW 110 depends on DM_ETH && SANDBOX 111 default y 112 bool "Sandbox: Bridge to Linux Raw Sockets" 113 help 114 This driver is a bridge from the bottom of the network stack 115 in U-Boot to the RAW AF_PACKET API in Linux. This allows real 116 network traffic to be tested from within sandbox. See 117 board/sandbox/README.sandbox for more details. 118 119config ETH_DESIGNWARE 120 bool "Synopsys Designware Ethernet MAC" 121 select PHYLIB 122 help 123 This MAC is present in SoCs from various vendors. It supports 124 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to 125 provide the PHY (physical media interface). 126 127config MVPP2 128 bool "Marvell Armada 375 network interface support" 129 depends on ARMADA_375 130 select PHYLIB 131 help 132 This driver supports the network interface units in the 133 Marvell ARMADA 375 SoC. 134 135config PCH_GBE 136 bool "Intel Platform Controller Hub EG20T GMAC driver" 137 depends on DM_ETH && DM_PCI 138 select PHYLIB 139 help 140 This MAC is present in Intel Platform Controller Hub EG20T. It 141 supports 10/100/1000 Mbps operation. 142 143config RTL8139 144 bool "Realtek 8139 series Ethernet controller driver" 145 help 146 This driver supports Realtek 8139 series fast ethernet family of 147 PCI chipsets/adapters. 148 149config RTL8169 150 bool "Realtek 8169 series Ethernet controller driver" 151 help 152 This driver supports Realtek 8169 series gigabit ethernet family of 153 PCI/PCIe chipsets/adapters. 154 155config SUN8I_EMAC 156 bool "Allwinner Sun8i Ethernet MAC support" 157 depends on DM_ETH 158 select PHYLIB 159 help 160 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC. 161 It can be found in H3/A64/A83T based SoCs and compatible with both 162 External and Internal PHY's. 163 164config XILINX_AXIEMAC 165 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) 166 select PHYLIB 167 select MII 168 bool "Xilinx AXI Ethernet" 169 help 170 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. 171 172config XILINX_EMACLITE 173 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) 174 select PHYLIB 175 select MII 176 bool "Xilinx Ethernetlite" 177 help 178 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. 179 180config ZYNQ_GEM 181 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP) 182 select PHYLIB 183 bool "Xilinx Ethernet GEM" 184 help 185 This MAC is present in Xilinx Zynq and ZynqMP SoCs. 186 187config PIC32_ETH 188 bool "Microchip PIC32 Ethernet Support" 189 depends on DM_ETH && MACH_PIC32 190 select PHYLIB 191 help 192 This driver implements 10/100 Mbps Ethernet and MAC layer for 193 Microchip PIC32 microcontrollers. 194 195endif # NETDEVICES 196