1config DM_ETH 2 bool "Enable Driver Model for Ethernet drivers" 3 depends on DM 4 help 5 Enable driver model for Ethernet. 6 7 The eth_*() interface will be implemented by the UC_ETH class 8 This is currently implemented in net/eth.c 9 Look in include/net.h for details. 10 11config PHYLIB 12 bool "Ethernet PHY (physical media interface) support" 13 help 14 Enable Ethernet PHY (physical media interface) support. 15 16menuconfig NETDEVICES 17 bool "Network device support" 18 depends on NET 19 default y if DM_ETH 20 help 21 You must select Y to enable any network device support 22 Generally if you have any networking support this is a given 23 24 If unsure, say Y 25 26if NETDEVICES 27 28config ALTERA_TSE 29 bool "Altera Triple-Speed Ethernet MAC support" 30 depends on DM_ETH 31 select PHYLIB 32 help 33 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC. 34 Please find details on the "Triple-Speed Ethernet MegaCore Function 35 Resource Center" of Altera. 36 37config E1000 38 bool "Intel PRO/1000 Gigabit Ethernet support" 39 help 40 This driver supports Intel(R) PRO/1000 gigabit ethernet family of 41 adapters. For more information on how to identify your adapter, go 42 to the Adapter & Driver ID Guide at: 43 44 <http://support.intel.com/support/network/adapter/pro100/21397.htm> 45 46config E1000_SPI_GENERIC 47 bool "Allow access to the Intel 8257x SPI bus" 48 depends on E1000 49 help 50 Allow generic access to the SPI bus on the Intel 8257x, for 51 example with the "sspi" command. 52 53config E1000_SPI 54 bool "Enable SPI bus utility code" 55 depends on E1000 56 help 57 Utility code for direct access to the SPI bus on Intel 8257x. 58 This does not do anything useful unless you set at least one 59 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC. 60 61config CMD_E1000 62 bool "Enable the e1000 command" 63 depends on E1000 64 help 65 This enables the 'e1000' management command for E1000 devices. When 66 used on devices with SPI support you can reprogram the EEPROM from 67 U-Boot. 68 69config ETH_SANDBOX 70 depends on DM_ETH && SANDBOX 71 default y 72 bool "Sandbox: Mocked Ethernet driver" 73 help 74 This driver simply responds with fake ARP replies and ping 75 replies that are used to verify network stack functionality 76 77 This driver is particularly useful in the test/dm/eth.c tests 78 79config ETH_SANDBOX_RAW 80 depends on DM_ETH && SANDBOX 81 default y 82 bool "Sandbox: Bridge to Linux Raw Sockets" 83 help 84 This driver is a bridge from the bottom of the network stack 85 in U-Boot to the RAW AF_PACKET API in Linux. This allows real 86 network traffic to be tested from within sandbox. See 87 board/sandbox/README.sandbox for more details. 88 89config ETH_DESIGNWARE 90 bool "Synopsys Designware Ethernet MAC" 91 select PHYLIB 92 help 93 This MAC is present in SoCs from various vendors. It supports 94 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to 95 provide the PHY (physical media interface). 96 97config PCH_GBE 98 bool "Intel Platform Controller Hub EG20T GMAC driver" 99 depends on DM_ETH && DM_PCI 100 select PHYLIB 101 help 102 This MAC is present in Intel Platform Controller Hub EG20T. It 103 supports 10/100/1000 Mbps operation. 104 105config ZYNQ_GEM 106 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP) 107 select PHYLIB 108 bool "Xilinx Ethernet GEM" 109 help 110 This MAC is present in Xilinx Zynq and ZynqMP SoCs. 111 112endif # NETDEVICES 113