1source "drivers/net/phy/Kconfig" 2 3config DM_ETH 4 bool "Enable Driver Model for Ethernet drivers" 5 depends on DM 6 help 7 Enable driver model for Ethernet. 8 9 The eth_*() interface will be implemented by the UC_ETH class 10 This is currently implemented in net/eth.c 11 Look in include/net.h for details. 12 13menuconfig NETDEVICES 14 bool "Network device support" 15 depends on NET 16 default y if DM_ETH 17 help 18 You must select Y to enable any network device support 19 Generally if you have any networking support this is a given 20 21 If unsure, say Y 22 23if NETDEVICES 24 25config PHY_GIGE 26 bool "Enable GbE PHY status parsing and configuration" 27 help 28 Enables support for parsing the status output and for 29 configuring GbE PHYs (affects the inner workings of some 30 commands and miiphyutil.c). 31 32config AG7XXX 33 bool "Atheros AG7xxx Ethernet MAC support" 34 depends on DM_ETH && ARCH_ATH79 35 select PHYLIB 36 help 37 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is 38 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips. 39 40 41config ALTERA_TSE 42 bool "Altera Triple-Speed Ethernet MAC support" 43 depends on DM_ETH 44 select PHYLIB 45 help 46 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC. 47 Please find details on the "Triple-Speed Ethernet MegaCore Function 48 Resource Center" of Altera. 49 50config BCM_SF2_ETH 51 bool "Broadcom SF2 (Starfighter2) Ethernet support" 52 select PHYLIB 53 help 54 This is an abstract framework which provides a generic interface 55 to MAC and DMA management for multiple Broadcom SoCs such as 56 Cygnus, NSP and bcm28155_ap platforms. 57 58config BCM_SF2_ETH_DEFAULT_PORT 59 int "Broadcom SF2 (Starfighter2) Ethernet default port number" 60 depends on BCM_SF2_ETH 61 default 0 62 help 63 Default port number for the Starfighter2 ethernet driver. 64 65config BCM_SF2_ETH_GMAC 66 bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support" 67 depends on BCM_SF2_ETH 68 help 69 This flag enables the ethernet support for Broadcom platforms with 70 GMAC such as Cygnus. This driver is based on the framework provided 71 by the BCM_SF2_ETH driver. 72 Say Y to any bcmcygnus based platforms. 73 74config DWC_ETH_QOS 75 bool "Synopsys DWC Ethernet QOS device support" 76 depends on DM_ETH 77 select PHYLIB 78 help 79 This driver supports the Synopsys Designware Ethernet QOS (Quality 80 Of Service) IP block. The IP supports many options for bus type, 81 clocking/reset structure, and feature list. This driver currently 82 supports the specific configuration used in NVIDIA's Tegra186 chip, 83 but should be extensible to other combinations quite easily. 84 85config E1000 86 bool "Intel PRO/1000 Gigabit Ethernet support" 87 help 88 This driver supports Intel(R) PRO/1000 gigabit ethernet family of 89 adapters. For more information on how to identify your adapter, go 90 to the Adapter & Driver ID Guide at: 91 92 <http://support.intel.com/support/network/adapter/pro100/21397.htm> 93 94config E1000_SPI_GENERIC 95 bool "Allow access to the Intel 8257x SPI bus" 96 depends on E1000 97 help 98 Allow generic access to the SPI bus on the Intel 8257x, for 99 example with the "sspi" command. 100 101config E1000_SPI 102 bool "Enable SPI bus utility code" 103 depends on E1000 104 help 105 Utility code for direct access to the SPI bus on Intel 8257x. 106 This does not do anything useful unless you set at least one 107 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC. 108 109config CMD_E1000 110 bool "Enable the e1000 command" 111 depends on E1000 112 help 113 This enables the 'e1000' management command for E1000 devices. When 114 used on devices with SPI support you can reprogram the EEPROM from 115 U-Boot. 116 117config ETH_SANDBOX 118 depends on DM_ETH && SANDBOX 119 default y 120 bool "Sandbox: Mocked Ethernet driver" 121 help 122 This driver simply responds with fake ARP replies and ping 123 replies that are used to verify network stack functionality 124 125 This driver is particularly useful in the test/dm/eth.c tests 126 127config ETH_SANDBOX_RAW 128 depends on DM_ETH && SANDBOX 129 default y 130 bool "Sandbox: Bridge to Linux Raw Sockets" 131 help 132 This driver is a bridge from the bottom of the network stack 133 in U-Boot to the RAW AF_PACKET API in Linux. This allows real 134 network traffic to be tested from within sandbox. See 135 board/sandbox/README.sandbox for more details. 136 137config ETH_DESIGNWARE 138 bool "Synopsys Designware Ethernet MAC" 139 select PHYLIB 140 help 141 This MAC is present in SoCs from various vendors. It supports 142 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to 143 provide the PHY (physical media interface). 144 145config ETHOC 146 bool "OpenCores 10/100 Mbps Ethernet MAC" 147 help 148 This MAC is present in OpenRISC and Xtensa XTFPGA boards. 149 150config FEC_MXC 151 bool "FEC Ethernet controller" 152 depends on MX5 || MX6 153 help 154 This driver supports the 10/100 Fast Ethernet controller for 155 NXP i.MX processors. 156 157config FTMAC100 158 bool "Ftmac100 Ethernet Support" 159 help 160 This MAC is present in Andestech SoCs. 161 162config MVPP2 163 bool "Marvell Armada 375/7K/8K network interface support" 164 depends on ARMADA_375 || ARMADA_8K 165 select PHYLIB 166 help 167 This driver supports the network interface units in the 168 Marvell ARMADA 375, 7K and 8K SoCs. 169 170config MACB 171 bool "Cadence MACB/GEM Ethernet Interface" 172 depends on DM_ETH 173 select PHYLIB 174 help 175 The Cadence MACB ethernet interface is found on many Atmel 176 AT91 and SAMA5 parts. This driver also supports the Cadence 177 GEM (Gigabit Ethernet MAC) found in some ARM SoC devices. 178 Say Y to include support for the MACB/GEM chip. 179 180config PCH_GBE 181 bool "Intel Platform Controller Hub EG20T GMAC driver" 182 depends on DM_ETH && DM_PCI 183 select PHYLIB 184 help 185 This MAC is present in Intel Platform Controller Hub EG20T. It 186 supports 10/100/1000 Mbps operation. 187 188config RGMII 189 bool "Enable RGMII" 190 help 191 Enable the support of the Reduced Gigabit Media-Independent 192 Interface (RGMII). 193 194config RTL8139 195 bool "Realtek 8139 series Ethernet controller driver" 196 help 197 This driver supports Realtek 8139 series fast ethernet family of 198 PCI chipsets/adapters. 199 200config RTL8169 201 bool "Realtek 8169 series Ethernet controller driver" 202 help 203 This driver supports Realtek 8169 series gigabit ethernet family of 204 PCI/PCIe chipsets/adapters. 205 206config SUN7I_GMAC 207 bool "Enable Allwinner GMAC Ethernet support" 208 help 209 Enable the support for Sun7i GMAC Ethernet controller 210 211config SUN4I_EMAC 212 bool "Allwinner Sun4i Ethernet MAC support" 213 depends on DM_ETH 214 help 215 This driver supports the Allwinner based SUN4I Ethernet MAC. 216 217config SUN8I_EMAC 218 bool "Allwinner Sun8i Ethernet MAC support" 219 depends on DM_ETH 220 select PHYLIB 221 select PHY_GIGE 222 help 223 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC. 224 It can be found in H3/A64/A83T based SoCs and compatible with both 225 External and Internal PHYs. 226 227config XILINX_AXIEMAC 228 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) 229 select PHYLIB 230 select MII 231 bool "Xilinx AXI Ethernet" 232 help 233 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. 234 235config XILINX_EMACLITE 236 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS) 237 select PHYLIB 238 select MII 239 bool "Xilinx Ethernetlite" 240 help 241 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. 242 243config ZYNQ_GEM 244 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP) 245 select PHYLIB 246 bool "Xilinx Ethernet GEM" 247 help 248 This MAC is present in Xilinx Zynq and ZynqMP SoCs. 249 250config PIC32_ETH 251 bool "Microchip PIC32 Ethernet Support" 252 depends on DM_ETH && MACH_PIC32 253 select PHYLIB 254 help 255 This driver implements 10/100 Mbps Ethernet and MAC layer for 256 Microchip PIC32 microcontrollers. 257 258config GMAC_ROCKCHIP 259 bool "Rockchip Synopsys Designware Ethernet MAC" 260 depends on DM_ETH && ETH_DESIGNWARE 261 help 262 This driver provides Rockchip SoCs network support based on the 263 Synopsys Designware driver. 264 265config RENESAS_RAVB 266 bool "Renesas Ethernet AVB MAC" 267 depends on DM_ETH && RCAR_GEN3 268 select PHYLIB 269 help 270 This driver implements support for the Ethernet AVB block in 271 Renesas M3 and H3 SoCs. 272 273config MPC8XX_FEC 274 bool "Fast Ethernet Controller on MPC8XX" 275 depends on 8xx 276 select MII 277 help 278 This driver implements support for the Fast Ethernet Controller 279 on MPC8XX 280 281config ETHER_ON_FEC1 282 bool "FEC1" 283 depends on MPC8XX_FEC 284 default y 285 286config FEC1_PHY 287 int "FEC1 PHY" 288 depends on ETHER_ON_FEC1 289 default -1 290 help 291 Define to the hardcoded PHY address which corresponds 292 to the given FEC; i. e. 293 #define CONFIG_FEC1_PHY 4 294 means that the PHY with address 4 is connected to FEC1 295 296 When set to -1, means to probe for first available. 297 298config PHY_NORXERR 299 bool "PHY_NORXERR" 300 depends on ETHER_ON_FEC1 301 default n 302 help 303 The PHY does not have a RXERR line (RMII only). 304 (so program the FEC to ignore it). 305 306config ETHER_ON_FEC2 307 bool "FEC2" 308 depends on MPC8XX_FEC && MPC885 309 default y 310 311config FEC2_PHY 312 int "FEC2 PHY" 313 depends on ETHER_ON_FEC2 314 default -1 315 help 316 Define to the hardcoded PHY address which corresponds 317 to the given FEC; i. e. 318 #define CONFIG_FEC1_PHY 4 319 means that the PHY with address 4 is connected to FEC1 320 321 When set to -1, means to probe for first available. 322 323config FEC2_PHY_NORXERR 324 bool "PHY_NORXERR" 325 depends on ETHER_ON_FEC2 326 default n 327 help 328 The PHY does not have a RXERR line (RMII only). 329 (so program the FEC to ignore it). 330 331endif # NETDEVICES 332