1config DM_ETH 2 bool "Enable Driver Model for Ethernet drivers" 3 depends on DM 4 help 5 Enable driver model for Ethernet. 6 7 The eth_*() interface will be implemented by the UC_ETH class 8 This is currently implemented in net/eth.c 9 Look in include/net.h for details. 10 11config PHYLIB 12 bool "Ethernet PHY (physical media interface) support" 13 help 14 Enable Ethernet PHY (physical media interface) support. 15 16config RTL8211X_PHY_FORCE_MASTER 17 bool "Ethernet PHY RTL8211x: force 1000BASE-T master mode" 18 depends on PHYLIB 19 help 20 Force master mode for 1000BASE-T on RTl8211x PHYs (except for RTL8211F). 21 This can work around link stability and data corruption issues on gigabit 22 links which can occur in slave mode on certain PHYs, e.g. on the 23 RTL8211C(L). 24 25 Please note that two directly connected devices (i.e. via crossover cable) 26 will not be able to establish a link between each other if they both force 27 master mode. Multiple devices forcing master mode when connected by a 28 network switch do not pose a problem as the switch configures its affected 29 ports into slave mode. 30 31 This option only affects gigabit links. If you must establish a direct 32 connection between two devices which both force master mode, try forcing 33 the link speed to 100MBit/s. 34 35 If unsure, say N. 36 37menuconfig NETDEVICES 38 bool "Network device support" 39 depends on NET 40 default y if DM_ETH 41 help 42 You must select Y to enable any network device support 43 Generally if you have any networking support this is a given 44 45 If unsure, say Y 46 47if NETDEVICES 48 49config ALTERA_TSE 50 bool "Altera Triple-Speed Ethernet MAC support" 51 depends on DM_ETH 52 select PHYLIB 53 help 54 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC. 55 Please find details on the "Triple-Speed Ethernet MegaCore Function 56 Resource Center" of Altera. 57 58config E1000 59 bool "Intel PRO/1000 Gigabit Ethernet support" 60 help 61 This driver supports Intel(R) PRO/1000 gigabit ethernet family of 62 adapters. For more information on how to identify your adapter, go 63 to the Adapter & Driver ID Guide at: 64 65 <http://support.intel.com/support/network/adapter/pro100/21397.htm> 66 67config E1000_SPI_GENERIC 68 bool "Allow access to the Intel 8257x SPI bus" 69 depends on E1000 70 help 71 Allow generic access to the SPI bus on the Intel 8257x, for 72 example with the "sspi" command. 73 74config E1000_SPI 75 bool "Enable SPI bus utility code" 76 depends on E1000 77 help 78 Utility code for direct access to the SPI bus on Intel 8257x. 79 This does not do anything useful unless you set at least one 80 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC. 81 82config CMD_E1000 83 bool "Enable the e1000 command" 84 depends on E1000 85 help 86 This enables the 'e1000' management command for E1000 devices. When 87 used on devices with SPI support you can reprogram the EEPROM from 88 U-Boot. 89 90config ETH_SANDBOX 91 depends on DM_ETH && SANDBOX 92 default y 93 bool "Sandbox: Mocked Ethernet driver" 94 help 95 This driver simply responds with fake ARP replies and ping 96 replies that are used to verify network stack functionality 97 98 This driver is particularly useful in the test/dm/eth.c tests 99 100config ETH_SANDBOX_RAW 101 depends on DM_ETH && SANDBOX 102 default y 103 bool "Sandbox: Bridge to Linux Raw Sockets" 104 help 105 This driver is a bridge from the bottom of the network stack 106 in U-Boot to the RAW AF_PACKET API in Linux. This allows real 107 network traffic to be tested from within sandbox. See 108 board/sandbox/README.sandbox for more details. 109 110config ETH_DESIGNWARE 111 bool "Synopsys Designware Ethernet MAC" 112 select PHYLIB 113 help 114 This MAC is present in SoCs from various vendors. It supports 115 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to 116 provide the PHY (physical media interface). 117 118config PCH_GBE 119 bool "Intel Platform Controller Hub EG20T GMAC driver" 120 depends on DM_ETH && DM_PCI 121 select PHYLIB 122 help 123 This MAC is present in Intel Platform Controller Hub EG20T. It 124 supports 10/100/1000 Mbps operation. 125 126config RTL8139 127 bool "Realtek 8139 series Ethernet controller driver" 128 help 129 This driver supports Realtek 8139 series fast ethernet family of 130 PCI chipsets/adapters. 131 132config RTL8169 133 bool "Realtek 8169 series Ethernet controller driver" 134 help 135 This driver supports Realtek 8169 series gigabit ethernet family of 136 PCI/PCIe chipsets/adapters. 137 138config XILINX_AXIEMAC 139 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) 140 select PHYLIB 141 select MII 142 bool "Xilinx AXI Ethernet" 143 help 144 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. 145 146config XILINX_EMACLITE 147 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) 148 select PHYLIB 149 select MII 150 bool "Xilinx Ethernetlite" 151 help 152 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. 153 154config ZYNQ_GEM 155 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP) 156 select PHYLIB 157 bool "Xilinx Ethernet GEM" 158 help 159 This MAC is present in Xilinx Zynq and ZynqMP SoCs. 160 161config PIC32_ETH 162 bool "Microchip PIC32 Ethernet Support" 163 depends on DM_ETH && MACH_PIC32 164 select PHYLIB 165 help 166 This driver implements 10/100 Mbps Ethernet and MAC layer for 167 Microchip PIC32 microcontrollers. 168 169endif # NETDEVICES 170