1config DM_ETH 2 bool "Enable Driver Model for Ethernet drivers" 3 depends on DM 4 help 5 Enable driver model for Ethernet. 6 7 The eth_*() interface will be implemented by the UC_ETH class 8 This is currently implemented in net/eth.c 9 Look in include/net.h for details. 10 11config PHYLIB 12 bool "Ethernet PHY (physical media interface) support" 13 help 14 Enable Ethernet PHY (physical media interface) support. 15 16config RTL8211X_PHY_FORCE_MASTER 17 bool "Ethernet PHY RTL8211x: force 1000BASE-T master mode" 18 depends on PHYLIB 19 help 20 Force master mode for 1000BASE-T on RTl8211x PHYs (except for RTL8211F). 21 This can work around link stability and data corruption issues on gigabit 22 links which can occur in slave mode on certain PHYs, e.g. on the 23 RTL8211C(L). 24 25 Please note that two directly connected devices (i.e. via crossover cable) 26 will not be able to establish a link between each other if they both force 27 master mode. Multiple devices forcing master mode when connected by a 28 network switch do not pose a problem as the switch configures its affected 29 ports into slave mode. 30 31 This option only affects gigabit links. If you must establish a direct 32 connection between two devices which both force master mode, try forcing 33 the link speed to 100MBit/s. 34 35 If unsure, say N. 36 37menuconfig NETDEVICES 38 bool "Network device support" 39 depends on NET 40 default y if DM_ETH 41 help 42 You must select Y to enable any network device support 43 Generally if you have any networking support this is a given 44 45 If unsure, say Y 46 47if NETDEVICES 48 49config AG7XXX 50 bool "Atheros AG7xxx Ethernet MAC support" 51 depends on DM_ETH && ARCH_ATH79 52 select PHYLIB 53 help 54 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is 55 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips. 56 57 58config ALTERA_TSE 59 bool "Altera Triple-Speed Ethernet MAC support" 60 depends on DM_ETH 61 select PHYLIB 62 help 63 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC. 64 Please find details on the "Triple-Speed Ethernet MegaCore Function 65 Resource Center" of Altera. 66 67config E1000 68 bool "Intel PRO/1000 Gigabit Ethernet support" 69 help 70 This driver supports Intel(R) PRO/1000 gigabit ethernet family of 71 adapters. For more information on how to identify your adapter, go 72 to the Adapter & Driver ID Guide at: 73 74 <http://support.intel.com/support/network/adapter/pro100/21397.htm> 75 76config E1000_SPI_GENERIC 77 bool "Allow access to the Intel 8257x SPI bus" 78 depends on E1000 79 help 80 Allow generic access to the SPI bus on the Intel 8257x, for 81 example with the "sspi" command. 82 83config E1000_SPI 84 bool "Enable SPI bus utility code" 85 depends on E1000 86 help 87 Utility code for direct access to the SPI bus on Intel 8257x. 88 This does not do anything useful unless you set at least one 89 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC. 90 91config CMD_E1000 92 bool "Enable the e1000 command" 93 depends on E1000 94 help 95 This enables the 'e1000' management command for E1000 devices. When 96 used on devices with SPI support you can reprogram the EEPROM from 97 U-Boot. 98 99config ETH_SANDBOX 100 depends on DM_ETH && SANDBOX 101 default y 102 bool "Sandbox: Mocked Ethernet driver" 103 help 104 This driver simply responds with fake ARP replies and ping 105 replies that are used to verify network stack functionality 106 107 This driver is particularly useful in the test/dm/eth.c tests 108 109config ETH_SANDBOX_RAW 110 depends on DM_ETH && SANDBOX 111 default y 112 bool "Sandbox: Bridge to Linux Raw Sockets" 113 help 114 This driver is a bridge from the bottom of the network stack 115 in U-Boot to the RAW AF_PACKET API in Linux. This allows real 116 network traffic to be tested from within sandbox. See 117 board/sandbox/README.sandbox for more details. 118 119config ETH_DESIGNWARE 120 bool "Synopsys Designware Ethernet MAC" 121 select PHYLIB 122 help 123 This MAC is present in SoCs from various vendors. It supports 124 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to 125 provide the PHY (physical media interface). 126 127config ETHOC 128 bool "OpenCores 10/100 Mbps Ethernet MAC" 129 help 130 This MAC is present in OpenRISC and Xtensa XTFPGA boards. 131 132config MVPP2 133 bool "Marvell Armada 375 network interface support" 134 depends on ARMADA_375 135 select PHYLIB 136 help 137 This driver supports the network interface units in the 138 Marvell ARMADA 375 SoC. 139 140config PCH_GBE 141 bool "Intel Platform Controller Hub EG20T GMAC driver" 142 depends on DM_ETH && DM_PCI 143 select PHYLIB 144 help 145 This MAC is present in Intel Platform Controller Hub EG20T. It 146 supports 10/100/1000 Mbps operation. 147 148config RTL8139 149 bool "Realtek 8139 series Ethernet controller driver" 150 help 151 This driver supports Realtek 8139 series fast ethernet family of 152 PCI chipsets/adapters. 153 154config RTL8169 155 bool "Realtek 8169 series Ethernet controller driver" 156 help 157 This driver supports Realtek 8169 series gigabit ethernet family of 158 PCI/PCIe chipsets/adapters. 159 160config SUN8I_EMAC 161 bool "Allwinner Sun8i Ethernet MAC support" 162 depends on DM_ETH 163 select PHYLIB 164 help 165 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC. 166 It can be found in H3/A64/A83T based SoCs and compatible with both 167 External and Internal PHY's. 168 169config XILINX_AXIEMAC 170 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) 171 select PHYLIB 172 select MII 173 bool "Xilinx AXI Ethernet" 174 help 175 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. 176 177config XILINX_EMACLITE 178 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) 179 select PHYLIB 180 select MII 181 bool "Xilinx Ethernetlite" 182 help 183 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. 184 185config ZYNQ_GEM 186 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP) 187 select PHYLIB 188 bool "Xilinx Ethernet GEM" 189 help 190 This MAC is present in Xilinx Zynq and ZynqMP SoCs. 191 192config PIC32_ETH 193 bool "Microchip PIC32 Ethernet Support" 194 depends on DM_ETH && MACH_PIC32 195 select PHYLIB 196 help 197 This driver implements 10/100 Mbps Ethernet and MAC layer for 198 Microchip PIC32 microcontrollers. 199 200endif # NETDEVICES 201