1source "drivers/net/phy/Kconfig" 2 3config DM_ETH 4 bool "Enable Driver Model for Ethernet drivers" 5 depends on DM 6 help 7 Enable driver model for Ethernet. 8 9 The eth_*() interface will be implemented by the UC_ETH class 10 This is currently implemented in net/eth.c 11 Look in include/net.h for details. 12 13menuconfig NETDEVICES 14 bool "Network device support" 15 depends on NET 16 default y if DM_ETH 17 help 18 You must select Y to enable any network device support 19 Generally if you have any networking support this is a given 20 21 If unsure, say Y 22 23if NETDEVICES 24 25config AG7XXX 26 bool "Atheros AG7xxx Ethernet MAC support" 27 depends on DM_ETH && ARCH_ATH79 28 select PHYLIB 29 help 30 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is 31 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips. 32 33 34config ALTERA_TSE 35 bool "Altera Triple-Speed Ethernet MAC support" 36 depends on DM_ETH 37 select PHYLIB 38 help 39 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC. 40 Please find details on the "Triple-Speed Ethernet MegaCore Function 41 Resource Center" of Altera. 42 43config DWC_ETH_QOS 44 bool "Synopsys DWC Ethernet QOS device support" 45 depends on DM_ETH 46 select PHYLIB 47 help 48 This driver supports the Synopsys Designware Ethernet QOS (Quality 49 Of Service) IP block. The IP supports many options for bus type, 50 clocking/reset structure, and feature list. This driver currently 51 supports the specific configuration used in NVIDIA's Tegra186 chip, 52 but should be extensible to other combinations quite easily. 53 54config E1000 55 bool "Intel PRO/1000 Gigabit Ethernet support" 56 help 57 This driver supports Intel(R) PRO/1000 gigabit ethernet family of 58 adapters. For more information on how to identify your adapter, go 59 to the Adapter & Driver ID Guide at: 60 61 <http://support.intel.com/support/network/adapter/pro100/21397.htm> 62 63config E1000_SPI_GENERIC 64 bool "Allow access to the Intel 8257x SPI bus" 65 depends on E1000 66 help 67 Allow generic access to the SPI bus on the Intel 8257x, for 68 example with the "sspi" command. 69 70config E1000_SPI 71 bool "Enable SPI bus utility code" 72 depends on E1000 73 help 74 Utility code for direct access to the SPI bus on Intel 8257x. 75 This does not do anything useful unless you set at least one 76 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC. 77 78config CMD_E1000 79 bool "Enable the e1000 command" 80 depends on E1000 81 help 82 This enables the 'e1000' management command for E1000 devices. When 83 used on devices with SPI support you can reprogram the EEPROM from 84 U-Boot. 85 86config ETH_SANDBOX 87 depends on DM_ETH && SANDBOX 88 default y 89 bool "Sandbox: Mocked Ethernet driver" 90 help 91 This driver simply responds with fake ARP replies and ping 92 replies that are used to verify network stack functionality 93 94 This driver is particularly useful in the test/dm/eth.c tests 95 96config ETH_SANDBOX_RAW 97 depends on DM_ETH && SANDBOX 98 default y 99 bool "Sandbox: Bridge to Linux Raw Sockets" 100 help 101 This driver is a bridge from the bottom of the network stack 102 in U-Boot to the RAW AF_PACKET API in Linux. This allows real 103 network traffic to be tested from within sandbox. See 104 board/sandbox/README.sandbox for more details. 105 106config ETH_DESIGNWARE 107 bool "Synopsys Designware Ethernet MAC" 108 select PHYLIB 109 help 110 This MAC is present in SoCs from various vendors. It supports 111 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to 112 provide the PHY (physical media interface). 113 114config ETHOC 115 bool "OpenCores 10/100 Mbps Ethernet MAC" 116 help 117 This MAC is present in OpenRISC and Xtensa XTFPGA boards. 118 119config FEC_MXC 120 bool "FEC Ethernet controller" 121 depends on MX5 || MX6 122 help 123 This driver supports the 10/100 Fast Ethernet controller for 124 NXP i.MX processors. 125 126config MVPP2 127 bool "Marvell Armada 375/7K/8K network interface support" 128 depends on ARMADA_375 || ARMADA_8K 129 select PHYLIB 130 help 131 This driver supports the network interface units in the 132 Marvell ARMADA 375, 7K and 8K SoCs. 133 134config MACB 135 bool "Cadence MACB/GEM Ethernet Interface" 136 depends on DM_ETH 137 select PHYLIB 138 help 139 The Cadence MACB ethernet interface is found on many Atmel 140 AT91 and SAMA5 parts. This driver also supports the Cadence 141 GEM (Gigabit Ethernet MAC) found in some ARM SoC devices. 142 Say Y to include support for the MACB/GEM chip. 143 144config PCH_GBE 145 bool "Intel Platform Controller Hub EG20T GMAC driver" 146 depends on DM_ETH && DM_PCI 147 select PHYLIB 148 help 149 This MAC is present in Intel Platform Controller Hub EG20T. It 150 supports 10/100/1000 Mbps operation. 151 152config RTL8139 153 bool "Realtek 8139 series Ethernet controller driver" 154 help 155 This driver supports Realtek 8139 series fast ethernet family of 156 PCI chipsets/adapters. 157 158config RTL8169 159 bool "Realtek 8169 series Ethernet controller driver" 160 help 161 This driver supports Realtek 8169 series gigabit ethernet family of 162 PCI/PCIe chipsets/adapters. 163 164config SUN8I_EMAC 165 bool "Allwinner Sun8i Ethernet MAC support" 166 depends on DM_ETH 167 select PHYLIB 168 help 169 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC. 170 It can be found in H3/A64/A83T based SoCs and compatible with both 171 External and Internal PHYs. 172 173config XILINX_AXIEMAC 174 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) 175 select PHYLIB 176 select MII 177 bool "Xilinx AXI Ethernet" 178 help 179 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. 180 181config XILINX_EMACLITE 182 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS) 183 select PHYLIB 184 select MII 185 bool "Xilinx Ethernetlite" 186 help 187 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. 188 189config ZYNQ_GEM 190 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP) 191 select PHYLIB 192 bool "Xilinx Ethernet GEM" 193 help 194 This MAC is present in Xilinx Zynq and ZynqMP SoCs. 195 196config PIC32_ETH 197 bool "Microchip PIC32 Ethernet Support" 198 depends on DM_ETH && MACH_PIC32 199 select PHYLIB 200 help 201 This driver implements 10/100 Mbps Ethernet and MAC layer for 202 Microchip PIC32 microcontrollers. 203 204config GMAC_ROCKCHIP 205 bool "Rockchip Synopsys Designware Ethernet MAC" 206 depends on DM_ETH && ETH_DESIGNWARE 207 help 208 This driver provides Rockchip SoCs network support based on the 209 Synopsys Designware driver. 210 211endif # NETDEVICES 212