1 /* 2 * ARM PrimeCell MultiMedia Card Interface - PL180 3 * 4 * Copyright (C) ST-Ericsson SA 2010 5 * 6 * Author: Ulf Hansson <ulf.hansson@stericsson.com> 7 * Author: Martin Lundholm <martin.xa.lundholm@stericsson.com> 8 * Ported to drivers/mmc/ by: Matt Waddel <matt.waddel@linaro.org> 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 /* #define DEBUG */ 14 15 #include <asm/io.h> 16 #include "common.h" 17 #include <errno.h> 18 #include <mmc.h> 19 #include "arm_pl180_mmci.h" 20 #include <malloc.h> 21 22 static int wait_for_command_end(struct mmc *dev, struct mmc_cmd *cmd) 23 { 24 u32 hoststatus, statusmask; 25 struct pl180_mmc_host *host = dev->priv; 26 27 statusmask = SDI_STA_CTIMEOUT | SDI_STA_CCRCFAIL; 28 if ((cmd->resp_type & MMC_RSP_PRESENT)) 29 statusmask |= SDI_STA_CMDREND; 30 else 31 statusmask |= SDI_STA_CMDSENT; 32 33 do 34 hoststatus = readl(&host->base->status) & statusmask; 35 while (!hoststatus); 36 37 writel(statusmask, &host->base->status_clear); 38 if (hoststatus & SDI_STA_CTIMEOUT) { 39 debug("CMD%d time out\n", cmd->cmdidx); 40 return -ETIMEDOUT; 41 } else if ((hoststatus & SDI_STA_CCRCFAIL) && 42 (cmd->resp_type & MMC_RSP_CRC)) { 43 printf("CMD%d CRC error\n", cmd->cmdidx); 44 return -EILSEQ; 45 } 46 47 if (cmd->resp_type & MMC_RSP_PRESENT) { 48 cmd->response[0] = readl(&host->base->response0); 49 cmd->response[1] = readl(&host->base->response1); 50 cmd->response[2] = readl(&host->base->response2); 51 cmd->response[3] = readl(&host->base->response3); 52 debug("CMD%d response[0]:0x%08X, response[1]:0x%08X, " 53 "response[2]:0x%08X, response[3]:0x%08X\n", 54 cmd->cmdidx, cmd->response[0], cmd->response[1], 55 cmd->response[2], cmd->response[3]); 56 } 57 58 return 0; 59 } 60 61 /* send command to the mmc card and wait for results */ 62 static int do_command(struct mmc *dev, struct mmc_cmd *cmd) 63 { 64 int result; 65 u32 sdi_cmd = 0; 66 struct pl180_mmc_host *host = dev->priv; 67 68 sdi_cmd = ((cmd->cmdidx & SDI_CMD_CMDINDEX_MASK) | SDI_CMD_CPSMEN); 69 70 if (cmd->resp_type) { 71 sdi_cmd |= SDI_CMD_WAITRESP; 72 if (cmd->resp_type & MMC_RSP_136) 73 sdi_cmd |= SDI_CMD_LONGRESP; 74 } 75 76 writel((u32)cmd->cmdarg, &host->base->argument); 77 udelay(COMMAND_REG_DELAY); 78 writel(sdi_cmd, &host->base->command); 79 result = wait_for_command_end(dev, cmd); 80 81 /* After CMD2 set RCA to a none zero value. */ 82 if ((result == 0) && (cmd->cmdidx == MMC_CMD_ALL_SEND_CID)) 83 dev->rca = 10; 84 85 /* After CMD3 open drain is switched off and push pull is used. */ 86 if ((result == 0) && (cmd->cmdidx == MMC_CMD_SET_RELATIVE_ADDR)) { 87 u32 sdi_pwr = readl(&host->base->power) & ~SDI_PWR_OPD; 88 writel(sdi_pwr, &host->base->power); 89 } 90 91 return result; 92 } 93 94 static int read_bytes(struct mmc *dev, u32 *dest, u32 blkcount, u32 blksize) 95 { 96 u32 *tempbuff = dest; 97 u64 xfercount = blkcount * blksize; 98 struct pl180_mmc_host *host = dev->priv; 99 u32 status, status_err; 100 101 debug("read_bytes: blkcount=%u blksize=%u\n", blkcount, blksize); 102 103 status = readl(&host->base->status); 104 status_err = status & (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT | 105 SDI_STA_RXOVERR); 106 while ((!status_err) && (xfercount >= sizeof(u32))) { 107 if (status & SDI_STA_RXDAVL) { 108 *(tempbuff) = readl(&host->base->fifo); 109 tempbuff++; 110 xfercount -= sizeof(u32); 111 } 112 status = readl(&host->base->status); 113 status_err = status & (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT | 114 SDI_STA_RXOVERR); 115 } 116 117 status_err = status & 118 (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT | SDI_STA_DBCKEND | 119 SDI_STA_RXOVERR); 120 while (!status_err) { 121 status = readl(&host->base->status); 122 status_err = status & 123 (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT | SDI_STA_DBCKEND | 124 SDI_STA_RXOVERR); 125 } 126 127 if (status & SDI_STA_DTIMEOUT) { 128 printf("Read data timed out, xfercount: %llu, status: 0x%08X\n", 129 xfercount, status); 130 return -ETIMEDOUT; 131 } else if (status & SDI_STA_DCRCFAIL) { 132 printf("Read data bytes CRC error: 0x%x\n", status); 133 return -EILSEQ; 134 } else if (status & SDI_STA_RXOVERR) { 135 printf("Read data RX overflow error\n"); 136 return -EIO; 137 } 138 139 writel(SDI_ICR_MASK, &host->base->status_clear); 140 141 if (xfercount) { 142 printf("Read data error, xfercount: %llu\n", xfercount); 143 return -ENOBUFS; 144 } 145 146 return 0; 147 } 148 149 static int write_bytes(struct mmc *dev, u32 *src, u32 blkcount, u32 blksize) 150 { 151 u32 *tempbuff = src; 152 int i; 153 u64 xfercount = blkcount * blksize; 154 struct pl180_mmc_host *host = dev->priv; 155 u32 status, status_err; 156 157 debug("write_bytes: blkcount=%u blksize=%u\n", blkcount, blksize); 158 159 status = readl(&host->base->status); 160 status_err = status & (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT); 161 while (!status_err && xfercount) { 162 if (status & SDI_STA_TXFIFOBW) { 163 if (xfercount >= SDI_FIFO_BURST_SIZE * sizeof(u32)) { 164 for (i = 0; i < SDI_FIFO_BURST_SIZE; i++) 165 writel(*(tempbuff + i), 166 &host->base->fifo); 167 tempbuff += SDI_FIFO_BURST_SIZE; 168 xfercount -= SDI_FIFO_BURST_SIZE * sizeof(u32); 169 } else { 170 while (xfercount >= sizeof(u32)) { 171 writel(*(tempbuff), &host->base->fifo); 172 tempbuff++; 173 xfercount -= sizeof(u32); 174 } 175 } 176 } 177 status = readl(&host->base->status); 178 status_err = status & (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT); 179 } 180 181 status_err = status & 182 (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT | SDI_STA_DBCKEND); 183 while (!status_err) { 184 status = readl(&host->base->status); 185 status_err = status & 186 (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT | SDI_STA_DBCKEND); 187 } 188 189 if (status & SDI_STA_DTIMEOUT) { 190 printf("Write data timed out, xfercount:%llu,status:0x%08X\n", 191 xfercount, status); 192 return -ETIMEDOUT; 193 } else if (status & SDI_STA_DCRCFAIL) { 194 printf("Write data CRC error\n"); 195 return -EILSEQ; 196 } 197 198 writel(SDI_ICR_MASK, &host->base->status_clear); 199 200 if (xfercount) { 201 printf("Write data error, xfercount:%llu", xfercount); 202 return -ENOBUFS; 203 } 204 205 return 0; 206 } 207 208 static int do_data_transfer(struct mmc *dev, 209 struct mmc_cmd *cmd, 210 struct mmc_data *data) 211 { 212 int error = -ETIMEDOUT; 213 struct pl180_mmc_host *host = dev->priv; 214 u32 blksz = 0; 215 u32 data_ctrl = 0; 216 u32 data_len = (u32) (data->blocks * data->blocksize); 217 218 if (!host->version2) { 219 blksz = (ffs(data->blocksize) - 1); 220 data_ctrl |= ((blksz << 4) & SDI_DCTRL_DBLKSIZE_MASK); 221 } else { 222 blksz = data->blocksize; 223 data_ctrl |= (blksz << SDI_DCTRL_DBLOCKSIZE_V2_SHIFT); 224 } 225 data_ctrl |= SDI_DCTRL_DTEN | SDI_DCTRL_BUSYMODE; 226 227 writel(SDI_DTIMER_DEFAULT, &host->base->datatimer); 228 writel(data_len, &host->base->datalength); 229 udelay(DATA_REG_DELAY); 230 231 if (data->flags & MMC_DATA_READ) { 232 data_ctrl |= SDI_DCTRL_DTDIR_IN; 233 writel(data_ctrl, &host->base->datactrl); 234 235 error = do_command(dev, cmd); 236 if (error) 237 return error; 238 239 error = read_bytes(dev, (u32 *)data->dest, (u32)data->blocks, 240 (u32)data->blocksize); 241 } else if (data->flags & MMC_DATA_WRITE) { 242 error = do_command(dev, cmd); 243 if (error) 244 return error; 245 246 writel(data_ctrl, &host->base->datactrl); 247 error = write_bytes(dev, (u32 *)data->src, (u32)data->blocks, 248 (u32)data->blocksize); 249 } 250 251 return error; 252 } 253 254 static int host_request(struct mmc *dev, 255 struct mmc_cmd *cmd, 256 struct mmc_data *data) 257 { 258 int result; 259 260 if (data) 261 result = do_data_transfer(dev, cmd, data); 262 else 263 result = do_command(dev, cmd); 264 265 return result; 266 } 267 268 /* MMC uses open drain drivers in the enumeration phase */ 269 static int mmc_host_reset(struct mmc *dev) 270 { 271 struct pl180_mmc_host *host = dev->priv; 272 273 writel(host->pwr_init, &host->base->power); 274 275 return 0; 276 } 277 278 static int host_set_ios(struct mmc *dev) 279 { 280 struct pl180_mmc_host *host = dev->priv; 281 u32 sdi_clkcr; 282 283 sdi_clkcr = readl(&host->base->clock); 284 285 /* Ramp up the clock rate */ 286 if (dev->clock) { 287 u32 clkdiv = 0; 288 u32 tmp_clock; 289 290 if (dev->clock >= dev->cfg->f_max) { 291 clkdiv = 0; 292 dev->clock = dev->cfg->f_max; 293 } else { 294 clkdiv = (host->clock_in / dev->clock) - 2; 295 } 296 297 tmp_clock = host->clock_in / (clkdiv + 2); 298 while (tmp_clock > dev->clock) { 299 clkdiv++; 300 tmp_clock = host->clock_in / (clkdiv + 2); 301 } 302 303 if (clkdiv > SDI_CLKCR_CLKDIV_MASK) 304 clkdiv = SDI_CLKCR_CLKDIV_MASK; 305 306 tmp_clock = host->clock_in / (clkdiv + 2); 307 dev->clock = tmp_clock; 308 sdi_clkcr &= ~(SDI_CLKCR_CLKDIV_MASK); 309 sdi_clkcr |= clkdiv; 310 } 311 312 /* Set the bus width */ 313 if (dev->bus_width) { 314 u32 buswidth = 0; 315 316 switch (dev->bus_width) { 317 case 1: 318 buswidth |= SDI_CLKCR_WIDBUS_1; 319 break; 320 case 4: 321 buswidth |= SDI_CLKCR_WIDBUS_4; 322 break; 323 case 8: 324 buswidth |= SDI_CLKCR_WIDBUS_8; 325 break; 326 default: 327 printf("Invalid bus width: %d\n", dev->bus_width); 328 break; 329 } 330 sdi_clkcr &= ~(SDI_CLKCR_WIDBUS_MASK); 331 sdi_clkcr |= buswidth; 332 } 333 334 writel(sdi_clkcr, &host->base->clock); 335 udelay(CLK_CHANGE_DELAY); 336 337 return 0; 338 } 339 340 static const struct mmc_ops arm_pl180_mmci_ops = { 341 .send_cmd = host_request, 342 .set_ios = host_set_ios, 343 .init = mmc_host_reset, 344 }; 345 346 /* 347 * mmc_host_init - initialize the mmc controller. 348 * Set initial clock and power for mmc slot. 349 * Initialize mmc struct and register with mmc framework. 350 */ 351 int arm_pl180_mmci_init(struct pl180_mmc_host *host) 352 { 353 struct mmc *mmc; 354 u32 sdi_u32; 355 356 writel(host->pwr_init, &host->base->power); 357 writel(host->clkdiv_init, &host->base->clock); 358 udelay(CLK_CHANGE_DELAY); 359 360 /* Disable mmc interrupts */ 361 sdi_u32 = readl(&host->base->mask0) & ~SDI_MASK0_MASK; 362 writel(sdi_u32, &host->base->mask0); 363 364 host->cfg.name = host->name; 365 host->cfg.ops = &arm_pl180_mmci_ops; 366 /* TODO remove the duplicates */ 367 host->cfg.host_caps = host->caps; 368 host->cfg.voltages = host->voltages; 369 host->cfg.f_min = host->clock_min; 370 host->cfg.f_max = host->clock_max; 371 if (host->b_max != 0) 372 host->cfg.b_max = host->b_max; 373 else 374 host->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; 375 376 mmc = mmc_create(&host->cfg, host); 377 if (mmc == NULL) 378 return -1; 379 380 debug("registered mmc interface number is:%d\n", mmc->block_dev.devnum); 381 382 return 0; 383 } 384