1 /* 2 * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> 3 * Andreas Heppel <aheppel@sysgo.de> 4 * 5 * (C) Copyright 2002 6 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 7 * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 /* 13 * PCI routines 14 */ 15 16 #include <common.h> 17 #include <bootretry.h> 18 #include <cli.h> 19 #include <command.h> 20 #include <console.h> 21 #include <dm.h> 22 #include <asm/processor.h> 23 #include <asm/io.h> 24 #include <pci.h> 25 26 struct pci_reg_info { 27 const char *name; 28 enum pci_size_t size; 29 u8 offset; 30 }; 31 32 static int pci_byte_size(enum pci_size_t size) 33 { 34 switch (size) { 35 case PCI_SIZE_8: 36 return 1; 37 case PCI_SIZE_16: 38 return 2; 39 case PCI_SIZE_32: 40 default: 41 return 4; 42 } 43 } 44 45 static int pci_field_width(enum pci_size_t size) 46 { 47 return pci_byte_size(size) * 2; 48 } 49 50 #ifdef CONFIG_DM_PCI 51 static void pci_show_regs(struct udevice *dev, struct pci_reg_info *regs) 52 { 53 for (; regs->name; regs++) { 54 unsigned long val; 55 56 dm_pci_read_config(dev, regs->offset, &val, regs->size); 57 printf(" %s =%*s%#.*lx\n", regs->name, 58 (int)(28 - strlen(regs->name)), "", 59 pci_field_width(regs->size), val); 60 } 61 } 62 #else 63 static unsigned long pci_read_config(pci_dev_t dev, int offset, 64 enum pci_size_t size) 65 { 66 u32 val32; 67 u16 val16; 68 u8 val8; 69 70 switch (size) { 71 case PCI_SIZE_8: 72 pci_read_config_byte(dev, offset, &val8); 73 return val8; 74 case PCI_SIZE_16: 75 pci_read_config_word(dev, offset, &val16); 76 return val16; 77 case PCI_SIZE_32: 78 default: 79 pci_read_config_dword(dev, offset, &val32); 80 return val32; 81 } 82 } 83 84 static void pci_show_regs(pci_dev_t dev, struct pci_reg_info *regs) 85 { 86 for (; regs->name; regs++) { 87 printf(" %s =%*s%#.*lx\n", regs->name, 88 (int)(28 - strlen(regs->name)), "", 89 pci_field_width(regs->size), 90 pci_read_config(dev, regs->offset, regs->size)); 91 } 92 } 93 #endif 94 95 #ifdef CONFIG_DM_PCI 96 int pci_bar_show(struct udevice *dev) 97 { 98 u8 header_type; 99 int bar_cnt, bar_id, mem_type; 100 bool is_64, is_io; 101 u32 base_low, base_high; 102 u32 size_low, size_high; 103 u64 base, size; 104 u32 reg_addr; 105 int prefetchable; 106 107 dm_pci_read_config8(dev, PCI_HEADER_TYPE, &header_type); 108 109 if (header_type == PCI_HEADER_TYPE_CARDBUS) { 110 printf("CardBus doesn't support BARs\n"); 111 return -ENOSYS; 112 } 113 114 bar_cnt = (header_type == PCI_HEADER_TYPE_NORMAL) ? 6 : 2; 115 116 printf("ID Base Size Width Type\n"); 117 printf("----------------------------------------------------------\n"); 118 119 bar_id = 0; 120 reg_addr = PCI_BASE_ADDRESS_0; 121 while (bar_cnt) { 122 dm_pci_read_config32(dev, reg_addr, &base_low); 123 dm_pci_write_config32(dev, reg_addr, 0xffffffff); 124 dm_pci_read_config32(dev, reg_addr, &size_low); 125 dm_pci_write_config32(dev, reg_addr, base_low); 126 reg_addr += 4; 127 128 base = base_low & ~0xf; 129 size = size_low & ~0xf; 130 base_high = 0x0; 131 size_high = 0xffffffff; 132 is_64 = 0; 133 prefetchable = base_low & PCI_BASE_ADDRESS_MEM_PREFETCH; 134 is_io = base_low & PCI_BASE_ADDRESS_SPACE_IO; 135 mem_type = base_low & PCI_BASE_ADDRESS_MEM_TYPE_MASK; 136 137 if (mem_type == PCI_BASE_ADDRESS_MEM_TYPE_64) { 138 dm_pci_read_config32(dev, reg_addr, &base_high); 139 dm_pci_write_config32(dev, reg_addr, 0xffffffff); 140 dm_pci_read_config32(dev, reg_addr, &size_high); 141 dm_pci_write_config32(dev, reg_addr, base_high); 142 bar_cnt--; 143 reg_addr += 4; 144 is_64 = 1; 145 } 146 147 base = base | ((u64)base_high << 32); 148 size = size | ((u64)size_high << 32); 149 150 if ((!is_64 && size_low) || (is_64 && size)) { 151 size = ~size + 1; 152 printf(" %d %#016llx %#016llx %d %s %s\n", 153 bar_id, base, size, is_64 ? 64 : 32, 154 is_io ? "I/O" : "MEM", 155 prefetchable ? "Prefetchable" : ""); 156 } 157 158 bar_id++; 159 bar_cnt--; 160 } 161 162 return 0; 163 } 164 #endif 165 166 static struct pci_reg_info regs_start[] = { 167 { "vendor ID", PCI_SIZE_16, PCI_VENDOR_ID }, 168 { "device ID", PCI_SIZE_16, PCI_DEVICE_ID }, 169 { "command register ID", PCI_SIZE_16, PCI_COMMAND }, 170 { "status register", PCI_SIZE_16, PCI_STATUS }, 171 { "revision ID", PCI_SIZE_8, PCI_REVISION_ID }, 172 {}, 173 }; 174 175 static struct pci_reg_info regs_rest[] = { 176 { "sub class code", PCI_SIZE_8, PCI_CLASS_SUB_CODE }, 177 { "programming interface", PCI_SIZE_8, PCI_CLASS_PROG }, 178 { "cache line", PCI_SIZE_8, PCI_CACHE_LINE_SIZE }, 179 { "latency time", PCI_SIZE_8, PCI_LATENCY_TIMER }, 180 { "header type", PCI_SIZE_8, PCI_HEADER_TYPE }, 181 { "BIST", PCI_SIZE_8, PCI_BIST }, 182 { "base address 0", PCI_SIZE_32, PCI_BASE_ADDRESS_0 }, 183 {}, 184 }; 185 186 static struct pci_reg_info regs_normal[] = { 187 { "base address 1", PCI_SIZE_32, PCI_BASE_ADDRESS_1 }, 188 { "base address 2", PCI_SIZE_32, PCI_BASE_ADDRESS_2 }, 189 { "base address 3", PCI_SIZE_32, PCI_BASE_ADDRESS_3 }, 190 { "base address 4", PCI_SIZE_32, PCI_BASE_ADDRESS_4 }, 191 { "base address 5", PCI_SIZE_32, PCI_BASE_ADDRESS_5 }, 192 { "cardBus CIS pointer", PCI_SIZE_32, PCI_CARDBUS_CIS }, 193 { "sub system vendor ID", PCI_SIZE_16, PCI_SUBSYSTEM_VENDOR_ID }, 194 { "sub system ID", PCI_SIZE_16, PCI_SUBSYSTEM_ID }, 195 { "expansion ROM base address", PCI_SIZE_32, PCI_ROM_ADDRESS }, 196 { "interrupt line", PCI_SIZE_8, PCI_INTERRUPT_LINE }, 197 { "interrupt pin", PCI_SIZE_8, PCI_INTERRUPT_PIN }, 198 { "min Grant", PCI_SIZE_8, PCI_MIN_GNT }, 199 { "max Latency", PCI_SIZE_8, PCI_MAX_LAT }, 200 {}, 201 }; 202 203 static struct pci_reg_info regs_bridge[] = { 204 { "base address 1", PCI_SIZE_32, PCI_BASE_ADDRESS_1 }, 205 { "primary bus number", PCI_SIZE_8, PCI_PRIMARY_BUS }, 206 { "secondary bus number", PCI_SIZE_8, PCI_SECONDARY_BUS }, 207 { "subordinate bus number", PCI_SIZE_8, PCI_SUBORDINATE_BUS }, 208 { "secondary latency timer", PCI_SIZE_8, PCI_SEC_LATENCY_TIMER }, 209 { "IO base", PCI_SIZE_8, PCI_IO_BASE }, 210 { "IO limit", PCI_SIZE_8, PCI_IO_LIMIT }, 211 { "secondary status", PCI_SIZE_16, PCI_SEC_STATUS }, 212 { "memory base", PCI_SIZE_16, PCI_MEMORY_BASE }, 213 { "memory limit", PCI_SIZE_16, PCI_MEMORY_LIMIT }, 214 { "prefetch memory base", PCI_SIZE_16, PCI_PREF_MEMORY_BASE }, 215 { "prefetch memory limit", PCI_SIZE_16, PCI_PREF_MEMORY_LIMIT }, 216 { "prefetch memory base upper", PCI_SIZE_32, PCI_PREF_BASE_UPPER32 }, 217 { "prefetch memory limit upper", PCI_SIZE_32, PCI_PREF_LIMIT_UPPER32 }, 218 { "IO base upper 16 bits", PCI_SIZE_16, PCI_IO_BASE_UPPER16 }, 219 { "IO limit upper 16 bits", PCI_SIZE_16, PCI_IO_LIMIT_UPPER16 }, 220 { "expansion ROM base address", PCI_SIZE_32, PCI_ROM_ADDRESS1 }, 221 { "interrupt line", PCI_SIZE_8, PCI_INTERRUPT_LINE }, 222 { "interrupt pin", PCI_SIZE_8, PCI_INTERRUPT_PIN }, 223 { "bridge control", PCI_SIZE_16, PCI_BRIDGE_CONTROL }, 224 {}, 225 }; 226 227 static struct pci_reg_info regs_cardbus[] = { 228 { "capabilities", PCI_SIZE_8, PCI_CB_CAPABILITY_LIST }, 229 { "secondary status", PCI_SIZE_16, PCI_CB_SEC_STATUS }, 230 { "primary bus number", PCI_SIZE_8, PCI_CB_PRIMARY_BUS }, 231 { "CardBus number", PCI_SIZE_8, PCI_CB_CARD_BUS }, 232 { "subordinate bus number", PCI_SIZE_8, PCI_CB_SUBORDINATE_BUS }, 233 { "CardBus latency timer", PCI_SIZE_8, PCI_CB_LATENCY_TIMER }, 234 { "CardBus memory base 0", PCI_SIZE_32, PCI_CB_MEMORY_BASE_0 }, 235 { "CardBus memory limit 0", PCI_SIZE_32, PCI_CB_MEMORY_LIMIT_0 }, 236 { "CardBus memory base 1", PCI_SIZE_32, PCI_CB_MEMORY_BASE_1 }, 237 { "CardBus memory limit 1", PCI_SIZE_32, PCI_CB_MEMORY_LIMIT_1 }, 238 { "CardBus IO base 0", PCI_SIZE_16, PCI_CB_IO_BASE_0 }, 239 { "CardBus IO base high 0", PCI_SIZE_16, PCI_CB_IO_BASE_0_HI }, 240 { "CardBus IO limit 0", PCI_SIZE_16, PCI_CB_IO_LIMIT_0 }, 241 { "CardBus IO limit high 0", PCI_SIZE_16, PCI_CB_IO_LIMIT_0_HI }, 242 { "CardBus IO base 1", PCI_SIZE_16, PCI_CB_IO_BASE_1 }, 243 { "CardBus IO base high 1", PCI_SIZE_16, PCI_CB_IO_BASE_1_HI }, 244 { "CardBus IO limit 1", PCI_SIZE_16, PCI_CB_IO_LIMIT_1 }, 245 { "CardBus IO limit high 1", PCI_SIZE_16, PCI_CB_IO_LIMIT_1_HI }, 246 { "interrupt line", PCI_SIZE_8, PCI_INTERRUPT_LINE }, 247 { "interrupt pin", PCI_SIZE_8, PCI_INTERRUPT_PIN }, 248 { "bridge control", PCI_SIZE_16, PCI_CB_BRIDGE_CONTROL }, 249 { "subvendor ID", PCI_SIZE_16, PCI_CB_SUBSYSTEM_VENDOR_ID }, 250 { "subdevice ID", PCI_SIZE_16, PCI_CB_SUBSYSTEM_ID }, 251 { "PC Card 16bit base address", PCI_SIZE_32, PCI_CB_LEGACY_MODE_BASE }, 252 {}, 253 }; 254 255 /** 256 * pci_header_show() - Show the header of the specified PCI device. 257 * 258 * @dev: Bus+Device+Function number 259 */ 260 #ifdef CONFIG_DM_PCI 261 void pci_header_show(struct udevice *dev) 262 #else 263 void pci_header_show(pci_dev_t dev) 264 #endif 265 { 266 #ifdef CONFIG_DM_PCI 267 unsigned long class, header_type; 268 269 dm_pci_read_config(dev, PCI_CLASS_CODE, &class, PCI_SIZE_8); 270 dm_pci_read_config(dev, PCI_HEADER_TYPE, &header_type, PCI_SIZE_8); 271 #else 272 u8 class, header_type; 273 274 pci_read_config_byte(dev, PCI_CLASS_CODE, &class); 275 pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type); 276 #endif 277 pci_show_regs(dev, regs_start); 278 printf(" class code = 0x%.2x (%s)\n", (int)class, 279 pci_class_str(class)); 280 pci_show_regs(dev, regs_rest); 281 282 switch (header_type & 0x03) { 283 case PCI_HEADER_TYPE_NORMAL: /* "normal" PCI device */ 284 pci_show_regs(dev, regs_normal); 285 break; 286 case PCI_HEADER_TYPE_BRIDGE: /* PCI-to-PCI bridge */ 287 pci_show_regs(dev, regs_bridge); 288 break; 289 case PCI_HEADER_TYPE_CARDBUS: /* PCI-to-CardBus bridge */ 290 pci_show_regs(dev, regs_cardbus); 291 break; 292 293 default: 294 printf("unknown header\n"); 295 break; 296 } 297 } 298 299 void pciinfo_header(int busnum, bool short_listing) 300 { 301 printf("Scanning PCI devices on bus %d\n", busnum); 302 303 if (short_listing) { 304 printf("BusDevFun VendorId DeviceId Device Class Sub-Class\n"); 305 printf("_____________________________________________________________\n"); 306 } 307 } 308 309 #ifdef CONFIG_DM_PCI 310 /** 311 * pci_header_show_brief() - Show the short-form PCI device header 312 * 313 * Reads and prints the header of the specified PCI device in short form. 314 * 315 * @dev: PCI device to show 316 */ 317 static void pci_header_show_brief(struct udevice *dev) 318 { 319 ulong vendor, device; 320 ulong class, subclass; 321 322 dm_pci_read_config(dev, PCI_VENDOR_ID, &vendor, PCI_SIZE_16); 323 dm_pci_read_config(dev, PCI_DEVICE_ID, &device, PCI_SIZE_16); 324 dm_pci_read_config(dev, PCI_CLASS_CODE, &class, PCI_SIZE_8); 325 dm_pci_read_config(dev, PCI_CLASS_SUB_CODE, &subclass, PCI_SIZE_8); 326 327 printf("0x%.4lx 0x%.4lx %-23s 0x%.2lx\n", 328 vendor, device, 329 pci_class_str(class), subclass); 330 } 331 332 static void pciinfo(struct udevice *bus, bool short_listing) 333 { 334 struct udevice *dev; 335 336 pciinfo_header(bus->seq, short_listing); 337 338 for (device_find_first_child(bus, &dev); 339 dev; 340 device_find_next_child(&dev)) { 341 struct pci_child_platdata *pplat; 342 343 pplat = dev_get_parent_platdata(dev); 344 if (short_listing) { 345 printf("%02x.%02x.%02x ", bus->seq, 346 PCI_DEV(pplat->devfn), PCI_FUNC(pplat->devfn)); 347 pci_header_show_brief(dev); 348 } else { 349 printf("\nFound PCI device %02x.%02x.%02x:\n", bus->seq, 350 PCI_DEV(pplat->devfn), PCI_FUNC(pplat->devfn)); 351 pci_header_show(dev); 352 } 353 } 354 } 355 356 #else 357 358 /** 359 * pci_header_show_brief() - Show the short-form PCI device header 360 * 361 * Reads and prints the header of the specified PCI device in short form. 362 * 363 * @dev: Bus+Device+Function number 364 */ 365 void pci_header_show_brief(pci_dev_t dev) 366 { 367 u16 vendor, device; 368 u8 class, subclass; 369 370 pci_read_config_word(dev, PCI_VENDOR_ID, &vendor); 371 pci_read_config_word(dev, PCI_DEVICE_ID, &device); 372 pci_read_config_byte(dev, PCI_CLASS_CODE, &class); 373 pci_read_config_byte(dev, PCI_CLASS_SUB_CODE, &subclass); 374 375 printf("0x%.4x 0x%.4x %-23s 0x%.2x\n", 376 vendor, device, 377 pci_class_str(class), subclass); 378 } 379 380 /** 381 * pciinfo() - Show a list of devices on the PCI bus 382 * 383 * Show information about devices on PCI bus. Depending on @short_pci_listing 384 * the output will be more or less exhaustive. 385 * 386 * @bus_num: The number of the bus to be scanned 387 * @short_pci_listing: true to use short form, showing only a brief header 388 * for each device 389 */ 390 void pciinfo(int bus_num, int short_pci_listing) 391 { 392 struct pci_controller *hose = pci_bus_to_hose(bus_num); 393 int device; 394 int function; 395 unsigned char header_type; 396 unsigned short vendor_id; 397 pci_dev_t dev; 398 int ret; 399 400 if (!hose) 401 return; 402 403 pciinfo_header(bus_num, short_pci_listing); 404 405 for (device = 0; device < PCI_MAX_PCI_DEVICES; device++) { 406 header_type = 0; 407 vendor_id = 0; 408 for (function = 0; function < PCI_MAX_PCI_FUNCTIONS; 409 function++) { 410 /* 411 * If this is not a multi-function device, we skip 412 * the rest. 413 */ 414 if (function && !(header_type & 0x80)) 415 break; 416 417 dev = PCI_BDF(bus_num, device, function); 418 419 if (pci_skip_dev(hose, dev)) 420 continue; 421 422 ret = pci_read_config_word(dev, PCI_VENDOR_ID, 423 &vendor_id); 424 if (ret) 425 goto error; 426 if ((vendor_id == 0xFFFF) || (vendor_id == 0x0000)) 427 continue; 428 429 if (!function) { 430 pci_read_config_byte(dev, PCI_HEADER_TYPE, 431 &header_type); 432 } 433 434 if (short_pci_listing) { 435 printf("%02x.%02x.%02x ", bus_num, device, 436 function); 437 pci_header_show_brief(dev); 438 } else { 439 printf("\nFound PCI device %02x.%02x.%02x:\n", 440 bus_num, device, function); 441 pci_header_show(dev); 442 } 443 } 444 } 445 446 return; 447 error: 448 printf("Cannot read bus configuration: %d\n", ret); 449 } 450 #endif 451 452 /** 453 * get_pci_dev() - Convert the "bus.device.function" identifier into a number 454 * 455 * @name: Device string in the form "bus.device.function" where each is in hex 456 * @return encoded pci_dev_t or -1 if the string was invalid 457 */ 458 static pci_dev_t get_pci_dev(char *name) 459 { 460 char cnum[12]; 461 int len, i, iold, n; 462 int bdfs[3] = {0,0,0}; 463 464 len = strlen(name); 465 if (len > 8) 466 return -1; 467 for (i = 0, iold = 0, n = 0; i < len; i++) { 468 if (name[i] == '.') { 469 memcpy(cnum, &name[iold], i - iold); 470 cnum[i - iold] = '\0'; 471 bdfs[n++] = simple_strtoul(cnum, NULL, 16); 472 iold = i + 1; 473 } 474 } 475 strcpy(cnum, &name[iold]); 476 if (n == 0) 477 n = 1; 478 bdfs[n] = simple_strtoul(cnum, NULL, 16); 479 480 return PCI_BDF(bdfs[0], bdfs[1], bdfs[2]); 481 } 482 483 #ifdef CONFIG_DM_PCI 484 static int pci_cfg_display(struct udevice *dev, ulong addr, 485 enum pci_size_t size, ulong length) 486 #else 487 static int pci_cfg_display(pci_dev_t bdf, ulong addr, enum pci_size_t size, 488 ulong length) 489 #endif 490 { 491 #define DISP_LINE_LEN 16 492 ulong i, nbytes, linebytes; 493 int byte_size; 494 int rc = 0; 495 496 byte_size = pci_byte_size(size); 497 if (length == 0) 498 length = 0x40 / byte_size; /* Standard PCI config space */ 499 500 /* Print the lines. 501 * once, and all accesses are with the specified bus width. 502 */ 503 nbytes = length * byte_size; 504 do { 505 printf("%08lx:", addr); 506 linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes; 507 for (i = 0; i < linebytes; i += byte_size) { 508 unsigned long val; 509 510 #ifdef CONFIG_DM_PCI 511 dm_pci_read_config(dev, addr, &val, size); 512 #else 513 val = pci_read_config(bdf, addr, size); 514 #endif 515 printf(" %0*lx", pci_field_width(size), val); 516 addr += byte_size; 517 } 518 printf("\n"); 519 nbytes -= linebytes; 520 if (ctrlc()) { 521 rc = 1; 522 break; 523 } 524 } while (nbytes > 0); 525 526 return (rc); 527 } 528 529 #ifndef CONFIG_DM_PCI 530 static int pci_cfg_write (pci_dev_t bdf, ulong addr, ulong size, ulong value) 531 { 532 if (size == 4) { 533 pci_write_config_dword(bdf, addr, value); 534 } 535 else if (size == 2) { 536 ushort val = value & 0xffff; 537 pci_write_config_word(bdf, addr, val); 538 } 539 else { 540 u_char val = value & 0xff; 541 pci_write_config_byte(bdf, addr, val); 542 } 543 return 0; 544 } 545 #endif 546 547 #ifdef CONFIG_DM_PCI 548 static int pci_cfg_modify(struct udevice *dev, ulong addr, ulong size, 549 ulong value, int incrflag) 550 #else 551 static int pci_cfg_modify(pci_dev_t bdf, ulong addr, ulong size, ulong value, 552 int incrflag) 553 #endif 554 { 555 ulong i; 556 int nbytes; 557 ulong val; 558 559 /* Print the address, followed by value. Then accept input for 560 * the next value. A non-converted value exits. 561 */ 562 do { 563 printf("%08lx:", addr); 564 #ifdef CONFIG_DM_PCI 565 dm_pci_read_config(dev, addr, &val, size); 566 #else 567 val = pci_read_config(bdf, addr, size); 568 #endif 569 printf(" %0*lx", pci_field_width(size), val); 570 571 nbytes = cli_readline(" ? "); 572 if (nbytes == 0 || (nbytes == 1 && console_buffer[0] == '-')) { 573 /* <CR> pressed as only input, don't modify current 574 * location and move to next. "-" pressed will go back. 575 */ 576 if (incrflag) 577 addr += nbytes ? -size : size; 578 nbytes = 1; 579 /* good enough to not time out */ 580 bootretry_reset_cmd_timeout(); 581 } 582 #ifdef CONFIG_BOOT_RETRY_TIME 583 else if (nbytes == -2) { 584 break; /* timed out, exit the command */ 585 } 586 #endif 587 else { 588 char *endp; 589 i = simple_strtoul(console_buffer, &endp, 16); 590 nbytes = endp - console_buffer; 591 if (nbytes) { 592 /* good enough to not time out 593 */ 594 bootretry_reset_cmd_timeout(); 595 #ifdef CONFIG_DM_PCI 596 dm_pci_write_config(dev, addr, i, size); 597 #else 598 pci_cfg_write(bdf, addr, size, i); 599 #endif 600 if (incrflag) 601 addr += size; 602 } 603 } 604 } while (nbytes); 605 606 return 0; 607 } 608 609 #ifdef CONFIG_DM_PCI 610 static const struct pci_flag_info { 611 uint flag; 612 const char *name; 613 } pci_flag_info[] = { 614 { PCI_REGION_IO, "io" }, 615 { PCI_REGION_PREFETCH, "prefetch" }, 616 { PCI_REGION_SYS_MEMORY, "sysmem" }, 617 { PCI_REGION_RO, "readonly" }, 618 { PCI_REGION_IO, "io" }, 619 }; 620 621 static void pci_show_regions(struct udevice *bus) 622 { 623 struct pci_controller *hose = dev_get_uclass_priv(bus); 624 const struct pci_region *reg; 625 int i, j; 626 627 if (!hose) { 628 printf("Bus '%s' is not a PCI controller\n", bus->name); 629 return; 630 } 631 632 printf("# %-16s %-16s %-16s %s\n", "Bus start", "Phys start", "Size", 633 "Flags"); 634 for (i = 0, reg = hose->regions; i < hose->region_count; i++, reg++) { 635 printf("%d %#016llx %#016llx %#016llx ", i, 636 (unsigned long long)reg->bus_start, 637 (unsigned long long)reg->phys_start, 638 (unsigned long long)reg->size); 639 if (!(reg->flags & PCI_REGION_TYPE)) 640 printf("mem "); 641 for (j = 0; j < ARRAY_SIZE(pci_flag_info); j++) { 642 if (reg->flags & pci_flag_info[j].flag) 643 printf("%s ", pci_flag_info[j].name); 644 } 645 printf("\n"); 646 } 647 } 648 #endif 649 650 /* PCI Configuration Space access commands 651 * 652 * Syntax: 653 * pci display[.b, .w, .l] bus.device.function} [addr] [len] 654 * pci next[.b, .w, .l] bus.device.function [addr] 655 * pci modify[.b, .w, .l] bus.device.function [addr] 656 * pci write[.b, .w, .l] bus.device.function addr value 657 */ 658 static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 659 { 660 ulong addr = 0, value = 0, cmd_size = 0; 661 enum pci_size_t size = PCI_SIZE_32; 662 #ifdef CONFIG_DM_PCI 663 struct udevice *dev, *bus; 664 #else 665 pci_dev_t dev; 666 #endif 667 int busnum = 0; 668 pci_dev_t bdf = 0; 669 char cmd = 's'; 670 int ret = 0; 671 672 if (argc > 1) 673 cmd = argv[1][0]; 674 675 switch (cmd) { 676 case 'd': /* display */ 677 case 'n': /* next */ 678 case 'm': /* modify */ 679 case 'w': /* write */ 680 /* Check for a size specification. */ 681 cmd_size = cmd_get_data_size(argv[1], 4); 682 size = (cmd_size == 4) ? PCI_SIZE_32 : cmd_size - 1; 683 if (argc > 3) 684 addr = simple_strtoul(argv[3], NULL, 16); 685 if (argc > 4) 686 value = simple_strtoul(argv[4], NULL, 16); 687 case 'h': /* header */ 688 #ifdef CONFIG_DM_PCI 689 case 'b': /* bars */ 690 #endif 691 if (argc < 3) 692 goto usage; 693 if ((bdf = get_pci_dev(argv[2])) == -1) 694 return 1; 695 break; 696 #if defined(CONFIG_CMD_PCI_ENUM) || defined(CONFIG_DM_PCI) 697 case 'e': 698 pci_init(); 699 return 0; 700 #endif 701 case 'r': /* no break */ 702 default: /* scan bus */ 703 value = 1; /* short listing */ 704 if (argc > 1) { 705 if (cmd != 'r' && argv[argc-1][0] == 'l') { 706 value = 0; 707 argc--; 708 } 709 if (argc > 1) 710 busnum = simple_strtoul(argv[1], NULL, 16); 711 } 712 #ifdef CONFIG_DM_PCI 713 ret = uclass_get_device_by_seq(UCLASS_PCI, busnum, &bus); 714 if (ret) { 715 printf("No such bus\n"); 716 return CMD_RET_FAILURE; 717 } 718 if (cmd == 'r') 719 pci_show_regions(bus); 720 else 721 pciinfo(bus, value); 722 #else 723 pciinfo(busnum, value); 724 #endif 725 return 0; 726 } 727 728 #ifdef CONFIG_DM_PCI 729 ret = dm_pci_bus_find_bdf(bdf, &dev); 730 if (ret) { 731 printf("No such device\n"); 732 return CMD_RET_FAILURE; 733 } 734 #else 735 dev = bdf; 736 #endif 737 738 switch (argv[1][0]) { 739 case 'h': /* header */ 740 pci_header_show(dev); 741 break; 742 case 'd': /* display */ 743 return pci_cfg_display(dev, addr, size, value); 744 case 'n': /* next */ 745 if (argc < 4) 746 goto usage; 747 ret = pci_cfg_modify(dev, addr, size, value, 0); 748 break; 749 case 'm': /* modify */ 750 if (argc < 4) 751 goto usage; 752 ret = pci_cfg_modify(dev, addr, size, value, 1); 753 break; 754 case 'w': /* write */ 755 if (argc < 5) 756 goto usage; 757 #ifdef CONFIG_DM_PCI 758 ret = dm_pci_write_config(dev, addr, value, size); 759 #else 760 ret = pci_cfg_write(dev, addr, size, value); 761 #endif 762 break; 763 #ifdef CONFIG_DM_PCI 764 765 case 'b': /* bars */ 766 return pci_bar_show(dev); 767 #endif 768 default: 769 ret = CMD_RET_USAGE; 770 break; 771 } 772 773 return ret; 774 usage: 775 return CMD_RET_USAGE; 776 } 777 778 /***************************************************/ 779 780 #ifdef CONFIG_SYS_LONGHELP 781 static char pci_help_text[] = 782 "[bus] [long]\n" 783 " - short or long list of PCI devices on bus 'bus'\n" 784 #if defined(CONFIG_CMD_PCI_ENUM) || defined(CONFIG_DM_PCI) 785 "pci enum\n" 786 " - Enumerate PCI buses\n" 787 #endif 788 "pci header b.d.f\n" 789 " - show header of PCI device 'bus.device.function'\n" 790 #ifdef CONFIG_DM_PCI 791 "pci bar b.d.f\n" 792 " - show BARs base and size for device b.d.f'\n" 793 "pci regions\n" 794 " - show PCI regions\n" 795 #endif 796 "pci display[.b, .w, .l] b.d.f [address] [# of objects]\n" 797 " - display PCI configuration space (CFG)\n" 798 "pci next[.b, .w, .l] b.d.f address\n" 799 " - modify, read and keep CFG address\n" 800 "pci modify[.b, .w, .l] b.d.f address\n" 801 " - modify, auto increment CFG address\n" 802 "pci write[.b, .w, .l] b.d.f address value\n" 803 " - write to CFG address"; 804 #endif 805 806 U_BOOT_CMD( 807 pci, 5, 1, do_pci, 808 "list and access PCI Configuration Space", pci_help_text 809 ); 810