1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
4 * Andreas Heppel <aheppel@sysgo.de>
5 *
6 * (C) Copyright 2002
7 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
8 * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
9 */
10
11 /*
12 * PCI routines
13 */
14
15 #include <common.h>
16 #include <bootretry.h>
17 #include <cli.h>
18 #include <command.h>
19 #include <console.h>
20 #include <dm.h>
21 #include <asm/processor.h>
22 #include <asm/io.h>
23 #include <pci.h>
24
25 struct pci_reg_info {
26 const char *name;
27 enum pci_size_t size;
28 u8 offset;
29 };
30
pci_byte_size(enum pci_size_t size)31 static int pci_byte_size(enum pci_size_t size)
32 {
33 switch (size) {
34 case PCI_SIZE_8:
35 return 1;
36 case PCI_SIZE_16:
37 return 2;
38 case PCI_SIZE_32:
39 default:
40 return 4;
41 }
42 }
43
pci_field_width(enum pci_size_t size)44 static int pci_field_width(enum pci_size_t size)
45 {
46 return pci_byte_size(size) * 2;
47 }
48
49 #ifdef CONFIG_DM_PCI
pci_show_regs(struct udevice * dev,struct pci_reg_info * regs)50 static void pci_show_regs(struct udevice *dev, struct pci_reg_info *regs)
51 {
52 for (; regs->name; regs++) {
53 unsigned long val;
54
55 dm_pci_read_config(dev, regs->offset, &val, regs->size);
56 printf(" %s =%*s%#.*lx\n", regs->name,
57 (int)(28 - strlen(regs->name)), "",
58 pci_field_width(regs->size), val);
59 }
60 }
61 #else
pci_read_config(pci_dev_t dev,int offset,enum pci_size_t size)62 static unsigned long pci_read_config(pci_dev_t dev, int offset,
63 enum pci_size_t size)
64 {
65 u32 val32;
66 u16 val16;
67 u8 val8;
68
69 switch (size) {
70 case PCI_SIZE_8:
71 pci_read_config_byte(dev, offset, &val8);
72 return val8;
73 case PCI_SIZE_16:
74 pci_read_config_word(dev, offset, &val16);
75 return val16;
76 case PCI_SIZE_32:
77 default:
78 pci_read_config_dword(dev, offset, &val32);
79 return val32;
80 }
81 }
82
pci_show_regs(pci_dev_t dev,struct pci_reg_info * regs)83 static void pci_show_regs(pci_dev_t dev, struct pci_reg_info *regs)
84 {
85 for (; regs->name; regs++) {
86 printf(" %s =%*s%#.*lx\n", regs->name,
87 (int)(28 - strlen(regs->name)), "",
88 pci_field_width(regs->size),
89 pci_read_config(dev, regs->offset, regs->size));
90 }
91 }
92 #endif
93
94 #ifdef CONFIG_DM_PCI
pci_bar_show(struct udevice * dev)95 int pci_bar_show(struct udevice *dev)
96 {
97 u8 header_type;
98 int bar_cnt, bar_id, mem_type;
99 bool is_64, is_io;
100 u32 base_low, base_high;
101 u32 size_low, size_high;
102 u64 base, size;
103 u32 reg_addr;
104 int prefetchable;
105
106 dm_pci_read_config8(dev, PCI_HEADER_TYPE, &header_type);
107
108 if (header_type == PCI_HEADER_TYPE_CARDBUS) {
109 printf("CardBus doesn't support BARs\n");
110 return -ENOSYS;
111 }
112
113 bar_cnt = (header_type == PCI_HEADER_TYPE_NORMAL) ? 6 : 2;
114
115 printf("ID Base Size Width Type\n");
116 printf("----------------------------------------------------------\n");
117
118 bar_id = 0;
119 reg_addr = PCI_BASE_ADDRESS_0;
120 while (bar_cnt) {
121 dm_pci_read_config32(dev, reg_addr, &base_low);
122 dm_pci_write_config32(dev, reg_addr, 0xffffffff);
123 dm_pci_read_config32(dev, reg_addr, &size_low);
124 dm_pci_write_config32(dev, reg_addr, base_low);
125 reg_addr += 4;
126
127 base = base_low & ~0xf;
128 size = size_low & ~0xf;
129 base_high = 0x0;
130 size_high = 0xffffffff;
131 is_64 = 0;
132 prefetchable = base_low & PCI_BASE_ADDRESS_MEM_PREFETCH;
133 is_io = base_low & PCI_BASE_ADDRESS_SPACE_IO;
134 mem_type = base_low & PCI_BASE_ADDRESS_MEM_TYPE_MASK;
135
136 if (mem_type == PCI_BASE_ADDRESS_MEM_TYPE_64) {
137 dm_pci_read_config32(dev, reg_addr, &base_high);
138 dm_pci_write_config32(dev, reg_addr, 0xffffffff);
139 dm_pci_read_config32(dev, reg_addr, &size_high);
140 dm_pci_write_config32(dev, reg_addr, base_high);
141 bar_cnt--;
142 reg_addr += 4;
143 is_64 = 1;
144 }
145
146 base = base | ((u64)base_high << 32);
147 size = size | ((u64)size_high << 32);
148
149 if ((!is_64 && size_low) || (is_64 && size)) {
150 size = ~size + 1;
151 printf(" %d %#016llx %#016llx %d %s %s\n",
152 bar_id, (unsigned long long)base,
153 (unsigned long long)size, is_64 ? 64 : 32,
154 is_io ? "I/O" : "MEM",
155 prefetchable ? "Prefetchable" : "");
156 }
157
158 bar_id++;
159 bar_cnt--;
160 }
161
162 return 0;
163 }
164 #endif
165
166 static struct pci_reg_info regs_start[] = {
167 { "vendor ID", PCI_SIZE_16, PCI_VENDOR_ID },
168 { "device ID", PCI_SIZE_16, PCI_DEVICE_ID },
169 { "command register ID", PCI_SIZE_16, PCI_COMMAND },
170 { "status register", PCI_SIZE_16, PCI_STATUS },
171 { "revision ID", PCI_SIZE_8, PCI_REVISION_ID },
172 {},
173 };
174
175 static struct pci_reg_info regs_rest[] = {
176 { "sub class code", PCI_SIZE_8, PCI_CLASS_SUB_CODE },
177 { "programming interface", PCI_SIZE_8, PCI_CLASS_PROG },
178 { "cache line", PCI_SIZE_8, PCI_CACHE_LINE_SIZE },
179 { "latency time", PCI_SIZE_8, PCI_LATENCY_TIMER },
180 { "header type", PCI_SIZE_8, PCI_HEADER_TYPE },
181 { "BIST", PCI_SIZE_8, PCI_BIST },
182 { "base address 0", PCI_SIZE_32, PCI_BASE_ADDRESS_0 },
183 {},
184 };
185
186 static struct pci_reg_info regs_normal[] = {
187 { "base address 1", PCI_SIZE_32, PCI_BASE_ADDRESS_1 },
188 { "base address 2", PCI_SIZE_32, PCI_BASE_ADDRESS_2 },
189 { "base address 3", PCI_SIZE_32, PCI_BASE_ADDRESS_3 },
190 { "base address 4", PCI_SIZE_32, PCI_BASE_ADDRESS_4 },
191 { "base address 5", PCI_SIZE_32, PCI_BASE_ADDRESS_5 },
192 { "cardBus CIS pointer", PCI_SIZE_32, PCI_CARDBUS_CIS },
193 { "sub system vendor ID", PCI_SIZE_16, PCI_SUBSYSTEM_VENDOR_ID },
194 { "sub system ID", PCI_SIZE_16, PCI_SUBSYSTEM_ID },
195 { "expansion ROM base address", PCI_SIZE_32, PCI_ROM_ADDRESS },
196 { "interrupt line", PCI_SIZE_8, PCI_INTERRUPT_LINE },
197 { "interrupt pin", PCI_SIZE_8, PCI_INTERRUPT_PIN },
198 { "min Grant", PCI_SIZE_8, PCI_MIN_GNT },
199 { "max Latency", PCI_SIZE_8, PCI_MAX_LAT },
200 {},
201 };
202
203 static struct pci_reg_info regs_bridge[] = {
204 { "base address 1", PCI_SIZE_32, PCI_BASE_ADDRESS_1 },
205 { "primary bus number", PCI_SIZE_8, PCI_PRIMARY_BUS },
206 { "secondary bus number", PCI_SIZE_8, PCI_SECONDARY_BUS },
207 { "subordinate bus number", PCI_SIZE_8, PCI_SUBORDINATE_BUS },
208 { "secondary latency timer", PCI_SIZE_8, PCI_SEC_LATENCY_TIMER },
209 { "IO base", PCI_SIZE_8, PCI_IO_BASE },
210 { "IO limit", PCI_SIZE_8, PCI_IO_LIMIT },
211 { "secondary status", PCI_SIZE_16, PCI_SEC_STATUS },
212 { "memory base", PCI_SIZE_16, PCI_MEMORY_BASE },
213 { "memory limit", PCI_SIZE_16, PCI_MEMORY_LIMIT },
214 { "prefetch memory base", PCI_SIZE_16, PCI_PREF_MEMORY_BASE },
215 { "prefetch memory limit", PCI_SIZE_16, PCI_PREF_MEMORY_LIMIT },
216 { "prefetch memory base upper", PCI_SIZE_32, PCI_PREF_BASE_UPPER32 },
217 { "prefetch memory limit upper", PCI_SIZE_32, PCI_PREF_LIMIT_UPPER32 },
218 { "IO base upper 16 bits", PCI_SIZE_16, PCI_IO_BASE_UPPER16 },
219 { "IO limit upper 16 bits", PCI_SIZE_16, PCI_IO_LIMIT_UPPER16 },
220 { "expansion ROM base address", PCI_SIZE_32, PCI_ROM_ADDRESS1 },
221 { "interrupt line", PCI_SIZE_8, PCI_INTERRUPT_LINE },
222 { "interrupt pin", PCI_SIZE_8, PCI_INTERRUPT_PIN },
223 { "bridge control", PCI_SIZE_16, PCI_BRIDGE_CONTROL },
224 {},
225 };
226
227 static struct pci_reg_info regs_cardbus[] = {
228 { "capabilities", PCI_SIZE_8, PCI_CB_CAPABILITY_LIST },
229 { "secondary status", PCI_SIZE_16, PCI_CB_SEC_STATUS },
230 { "primary bus number", PCI_SIZE_8, PCI_CB_PRIMARY_BUS },
231 { "CardBus number", PCI_SIZE_8, PCI_CB_CARD_BUS },
232 { "subordinate bus number", PCI_SIZE_8, PCI_CB_SUBORDINATE_BUS },
233 { "CardBus latency timer", PCI_SIZE_8, PCI_CB_LATENCY_TIMER },
234 { "CardBus memory base 0", PCI_SIZE_32, PCI_CB_MEMORY_BASE_0 },
235 { "CardBus memory limit 0", PCI_SIZE_32, PCI_CB_MEMORY_LIMIT_0 },
236 { "CardBus memory base 1", PCI_SIZE_32, PCI_CB_MEMORY_BASE_1 },
237 { "CardBus memory limit 1", PCI_SIZE_32, PCI_CB_MEMORY_LIMIT_1 },
238 { "CardBus IO base 0", PCI_SIZE_16, PCI_CB_IO_BASE_0 },
239 { "CardBus IO base high 0", PCI_SIZE_16, PCI_CB_IO_BASE_0_HI },
240 { "CardBus IO limit 0", PCI_SIZE_16, PCI_CB_IO_LIMIT_0 },
241 { "CardBus IO limit high 0", PCI_SIZE_16, PCI_CB_IO_LIMIT_0_HI },
242 { "CardBus IO base 1", PCI_SIZE_16, PCI_CB_IO_BASE_1 },
243 { "CardBus IO base high 1", PCI_SIZE_16, PCI_CB_IO_BASE_1_HI },
244 { "CardBus IO limit 1", PCI_SIZE_16, PCI_CB_IO_LIMIT_1 },
245 { "CardBus IO limit high 1", PCI_SIZE_16, PCI_CB_IO_LIMIT_1_HI },
246 { "interrupt line", PCI_SIZE_8, PCI_INTERRUPT_LINE },
247 { "interrupt pin", PCI_SIZE_8, PCI_INTERRUPT_PIN },
248 { "bridge control", PCI_SIZE_16, PCI_CB_BRIDGE_CONTROL },
249 { "subvendor ID", PCI_SIZE_16, PCI_CB_SUBSYSTEM_VENDOR_ID },
250 { "subdevice ID", PCI_SIZE_16, PCI_CB_SUBSYSTEM_ID },
251 { "PC Card 16bit base address", PCI_SIZE_32, PCI_CB_LEGACY_MODE_BASE },
252 {},
253 };
254
255 /**
256 * pci_header_show() - Show the header of the specified PCI device.
257 *
258 * @dev: Bus+Device+Function number
259 */
260 #ifdef CONFIG_DM_PCI
pci_header_show(struct udevice * dev)261 void pci_header_show(struct udevice *dev)
262 #else
263 void pci_header_show(pci_dev_t dev)
264 #endif
265 {
266 #ifdef CONFIG_DM_PCI
267 unsigned long class, header_type;
268
269 dm_pci_read_config(dev, PCI_CLASS_CODE, &class, PCI_SIZE_8);
270 dm_pci_read_config(dev, PCI_HEADER_TYPE, &header_type, PCI_SIZE_8);
271 #else
272 u8 class, header_type;
273
274 pci_read_config_byte(dev, PCI_CLASS_CODE, &class);
275 pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
276 #endif
277 pci_show_regs(dev, regs_start);
278 printf(" class code = 0x%.2x (%s)\n", (int)class,
279 pci_class_str(class));
280 pci_show_regs(dev, regs_rest);
281
282 switch (header_type & 0x03) {
283 case PCI_HEADER_TYPE_NORMAL: /* "normal" PCI device */
284 pci_show_regs(dev, regs_normal);
285 break;
286 case PCI_HEADER_TYPE_BRIDGE: /* PCI-to-PCI bridge */
287 pci_show_regs(dev, regs_bridge);
288 break;
289 case PCI_HEADER_TYPE_CARDBUS: /* PCI-to-CardBus bridge */
290 pci_show_regs(dev, regs_cardbus);
291 break;
292
293 default:
294 printf("unknown header\n");
295 break;
296 }
297 }
298
pciinfo_header(int busnum,bool short_listing)299 void pciinfo_header(int busnum, bool short_listing)
300 {
301 printf("Scanning PCI devices on bus %d\n", busnum);
302
303 if (short_listing) {
304 printf("BusDevFun VendorId DeviceId Device Class Sub-Class\n");
305 printf("_____________________________________________________________\n");
306 }
307 }
308
309 #ifdef CONFIG_DM_PCI
310 /**
311 * pci_header_show_brief() - Show the short-form PCI device header
312 *
313 * Reads and prints the header of the specified PCI device in short form.
314 *
315 * @dev: PCI device to show
316 */
pci_header_show_brief(struct udevice * dev)317 static void pci_header_show_brief(struct udevice *dev)
318 {
319 ulong vendor, device;
320 ulong class, subclass;
321
322 dm_pci_read_config(dev, PCI_VENDOR_ID, &vendor, PCI_SIZE_16);
323 dm_pci_read_config(dev, PCI_DEVICE_ID, &device, PCI_SIZE_16);
324 dm_pci_read_config(dev, PCI_CLASS_CODE, &class, PCI_SIZE_8);
325 dm_pci_read_config(dev, PCI_CLASS_SUB_CODE, &subclass, PCI_SIZE_8);
326
327 printf("0x%.4lx 0x%.4lx %-23s 0x%.2lx\n",
328 vendor, device,
329 pci_class_str(class), subclass);
330 }
331
pciinfo(struct udevice * bus,bool short_listing)332 static void pciinfo(struct udevice *bus, bool short_listing)
333 {
334 struct udevice *dev;
335
336 pciinfo_header(bus->seq, short_listing);
337
338 for (device_find_first_child(bus, &dev);
339 dev;
340 device_find_next_child(&dev)) {
341 struct pci_child_platdata *pplat;
342
343 pplat = dev_get_parent_platdata(dev);
344 if (short_listing) {
345 printf("%02x.%02x.%02x ", bus->seq,
346 PCI_DEV(pplat->devfn), PCI_FUNC(pplat->devfn));
347 pci_header_show_brief(dev);
348 } else {
349 printf("\nFound PCI device %02x.%02x.%02x:\n", bus->seq,
350 PCI_DEV(pplat->devfn), PCI_FUNC(pplat->devfn));
351 pci_header_show(dev);
352 }
353 }
354 }
355
356 #else
357
358 /**
359 * pci_header_show_brief() - Show the short-form PCI device header
360 *
361 * Reads and prints the header of the specified PCI device in short form.
362 *
363 * @dev: Bus+Device+Function number
364 */
pci_header_show_brief(pci_dev_t dev)365 void pci_header_show_brief(pci_dev_t dev)
366 {
367 u16 vendor, device;
368 u8 class, subclass;
369
370 pci_read_config_word(dev, PCI_VENDOR_ID, &vendor);
371 pci_read_config_word(dev, PCI_DEVICE_ID, &device);
372 pci_read_config_byte(dev, PCI_CLASS_CODE, &class);
373 pci_read_config_byte(dev, PCI_CLASS_SUB_CODE, &subclass);
374
375 printf("0x%.4x 0x%.4x %-23s 0x%.2x\n",
376 vendor, device,
377 pci_class_str(class), subclass);
378 }
379
380 /**
381 * pciinfo() - Show a list of devices on the PCI bus
382 *
383 * Show information about devices on PCI bus. Depending on @short_pci_listing
384 * the output will be more or less exhaustive.
385 *
386 * @bus_num: The number of the bus to be scanned
387 * @short_pci_listing: true to use short form, showing only a brief header
388 * for each device
389 */
pciinfo(int bus_num,int short_pci_listing)390 void pciinfo(int bus_num, int short_pci_listing)
391 {
392 struct pci_controller *hose = pci_bus_to_hose(bus_num);
393 int device;
394 int function;
395 unsigned char header_type;
396 unsigned short vendor_id;
397 pci_dev_t dev;
398 int ret;
399
400 if (!hose)
401 return;
402
403 pciinfo_header(bus_num, short_pci_listing);
404
405 for (device = 0; device < PCI_MAX_PCI_DEVICES; device++) {
406 header_type = 0;
407 vendor_id = 0;
408 for (function = 0; function < PCI_MAX_PCI_FUNCTIONS;
409 function++) {
410 /*
411 * If this is not a multi-function device, we skip
412 * the rest.
413 */
414 if (function && !(header_type & 0x80))
415 break;
416
417 dev = PCI_BDF(bus_num, device, function);
418
419 if (pci_skip_dev(hose, dev))
420 continue;
421
422 ret = pci_read_config_word(dev, PCI_VENDOR_ID,
423 &vendor_id);
424 if (ret)
425 goto error;
426 if ((vendor_id == 0xFFFF) || (vendor_id == 0x0000))
427 continue;
428
429 if (!function) {
430 pci_read_config_byte(dev, PCI_HEADER_TYPE,
431 &header_type);
432 }
433
434 if (short_pci_listing) {
435 printf("%02x.%02x.%02x ", bus_num, device,
436 function);
437 pci_header_show_brief(dev);
438 } else {
439 printf("\nFound PCI device %02x.%02x.%02x:\n",
440 bus_num, device, function);
441 pci_header_show(dev);
442 }
443 }
444 }
445
446 return;
447 error:
448 printf("Cannot read bus configuration: %d\n", ret);
449 }
450 #endif
451
452 /**
453 * get_pci_dev() - Convert the "bus.device.function" identifier into a number
454 *
455 * @name: Device string in the form "bus.device.function" where each is in hex
456 * @return encoded pci_dev_t or -1 if the string was invalid
457 */
get_pci_dev(char * name)458 static pci_dev_t get_pci_dev(char *name)
459 {
460 char cnum[12];
461 int len, i, iold, n;
462 int bdfs[3] = {0,0,0};
463
464 len = strlen(name);
465 if (len > 8)
466 return -1;
467 for (i = 0, iold = 0, n = 0; i < len; i++) {
468 if (name[i] == '.') {
469 memcpy(cnum, &name[iold], i - iold);
470 cnum[i - iold] = '\0';
471 bdfs[n++] = simple_strtoul(cnum, NULL, 16);
472 iold = i + 1;
473 }
474 }
475 strcpy(cnum, &name[iold]);
476 if (n == 0)
477 n = 1;
478 bdfs[n] = simple_strtoul(cnum, NULL, 16);
479
480 return PCI_BDF(bdfs[0], bdfs[1], bdfs[2]);
481 }
482
483 #ifdef CONFIG_DM_PCI
pci_cfg_display(struct udevice * dev,ulong addr,enum pci_size_t size,ulong length)484 static int pci_cfg_display(struct udevice *dev, ulong addr,
485 enum pci_size_t size, ulong length)
486 #else
487 static int pci_cfg_display(pci_dev_t bdf, ulong addr, enum pci_size_t size,
488 ulong length)
489 #endif
490 {
491 #define DISP_LINE_LEN 16
492 ulong i, nbytes, linebytes;
493 int byte_size;
494 int rc = 0;
495
496 byte_size = pci_byte_size(size);
497 if (length == 0)
498 length = 0x40 / byte_size; /* Standard PCI config space */
499
500 /* Print the lines.
501 * once, and all accesses are with the specified bus width.
502 */
503 nbytes = length * byte_size;
504 do {
505 printf("%08lx:", addr);
506 linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
507 for (i = 0; i < linebytes; i += byte_size) {
508 unsigned long val;
509
510 #ifdef CONFIG_DM_PCI
511 dm_pci_read_config(dev, addr, &val, size);
512 #else
513 val = pci_read_config(bdf, addr, size);
514 #endif
515 printf(" %0*lx", pci_field_width(size), val);
516 addr += byte_size;
517 }
518 printf("\n");
519 nbytes -= linebytes;
520 if (ctrlc()) {
521 rc = 1;
522 break;
523 }
524 } while (nbytes > 0);
525
526 return (rc);
527 }
528
529 #ifndef CONFIG_DM_PCI
pci_cfg_write(pci_dev_t bdf,ulong addr,ulong size,ulong value)530 static int pci_cfg_write (pci_dev_t bdf, ulong addr, ulong size, ulong value)
531 {
532 if (size == 4) {
533 pci_write_config_dword(bdf, addr, value);
534 }
535 else if (size == 2) {
536 ushort val = value & 0xffff;
537 pci_write_config_word(bdf, addr, val);
538 }
539 else {
540 u_char val = value & 0xff;
541 pci_write_config_byte(bdf, addr, val);
542 }
543 return 0;
544 }
545 #endif
546
547 #ifdef CONFIG_DM_PCI
pci_cfg_modify(struct udevice * dev,ulong addr,ulong size,ulong value,int incrflag)548 static int pci_cfg_modify(struct udevice *dev, ulong addr, ulong size,
549 ulong value, int incrflag)
550 #else
551 static int pci_cfg_modify(pci_dev_t bdf, ulong addr, ulong size, ulong value,
552 int incrflag)
553 #endif
554 {
555 ulong i;
556 int nbytes;
557 ulong val;
558
559 /* Print the address, followed by value. Then accept input for
560 * the next value. A non-converted value exits.
561 */
562 do {
563 printf("%08lx:", addr);
564 #ifdef CONFIG_DM_PCI
565 dm_pci_read_config(dev, addr, &val, size);
566 #else
567 val = pci_read_config(bdf, addr, size);
568 #endif
569 printf(" %0*lx", pci_field_width(size), val);
570
571 nbytes = cli_readline(" ? ");
572 if (nbytes == 0 || (nbytes == 1 && console_buffer[0] == '-')) {
573 /* <CR> pressed as only input, don't modify current
574 * location and move to next. "-" pressed will go back.
575 */
576 if (incrflag)
577 addr += nbytes ? -size : size;
578 nbytes = 1;
579 /* good enough to not time out */
580 bootretry_reset_cmd_timeout();
581 }
582 #ifdef CONFIG_BOOT_RETRY_TIME
583 else if (nbytes == -2) {
584 break; /* timed out, exit the command */
585 }
586 #endif
587 else {
588 char *endp;
589 i = simple_strtoul(console_buffer, &endp, 16);
590 nbytes = endp - console_buffer;
591 if (nbytes) {
592 /* good enough to not time out
593 */
594 bootretry_reset_cmd_timeout();
595 #ifdef CONFIG_DM_PCI
596 dm_pci_write_config(dev, addr, i, size);
597 #else
598 pci_cfg_write(bdf, addr, size, i);
599 #endif
600 if (incrflag)
601 addr += size;
602 }
603 }
604 } while (nbytes);
605
606 return 0;
607 }
608
609 #ifdef CONFIG_DM_PCI
610 static const struct pci_flag_info {
611 uint flag;
612 const char *name;
613 } pci_flag_info[] = {
614 { PCI_REGION_IO, "io" },
615 { PCI_REGION_PREFETCH, "prefetch" },
616 { PCI_REGION_SYS_MEMORY, "sysmem" },
617 { PCI_REGION_RO, "readonly" },
618 { PCI_REGION_IO, "io" },
619 };
620
pci_show_regions(struct udevice * bus)621 static void pci_show_regions(struct udevice *bus)
622 {
623 struct pci_controller *hose = dev_get_uclass_priv(bus);
624 const struct pci_region *reg;
625 int i, j;
626
627 if (!hose) {
628 printf("Bus '%s' is not a PCI controller\n", bus->name);
629 return;
630 }
631
632 printf("# %-16s %-16s %-16s %s\n", "Bus start", "Phys start", "Size",
633 "Flags");
634 for (i = 0, reg = hose->regions; i < hose->region_count; i++, reg++) {
635 printf("%d %#016llx %#016llx %#016llx ", i,
636 (unsigned long long)reg->bus_start,
637 (unsigned long long)reg->phys_start,
638 (unsigned long long)reg->size);
639 if (!(reg->flags & PCI_REGION_TYPE))
640 printf("mem ");
641 for (j = 0; j < ARRAY_SIZE(pci_flag_info); j++) {
642 if (reg->flags & pci_flag_info[j].flag)
643 printf("%s ", pci_flag_info[j].name);
644 }
645 printf("\n");
646 }
647 }
648 #endif
649
650 /* PCI Configuration Space access commands
651 *
652 * Syntax:
653 * pci display[.b, .w, .l] bus.device.function} [addr] [len]
654 * pci next[.b, .w, .l] bus.device.function [addr]
655 * pci modify[.b, .w, .l] bus.device.function [addr]
656 * pci write[.b, .w, .l] bus.device.function addr value
657 */
do_pci(cmd_tbl_t * cmdtp,int flag,int argc,char * const argv[])658 static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
659 {
660 ulong addr = 0, value = 0, cmd_size = 0;
661 enum pci_size_t size = PCI_SIZE_32;
662 #ifdef CONFIG_DM_PCI
663 struct udevice *dev, *bus;
664 #else
665 pci_dev_t dev;
666 #endif
667 int busnum = 0;
668 pci_dev_t bdf = 0;
669 char cmd = 's';
670 int ret = 0;
671
672 if (argc > 1)
673 cmd = argv[1][0];
674
675 switch (cmd) {
676 case 'd': /* display */
677 case 'n': /* next */
678 case 'm': /* modify */
679 case 'w': /* write */
680 /* Check for a size specification. */
681 cmd_size = cmd_get_data_size(argv[1], 4);
682 size = (cmd_size == 4) ? PCI_SIZE_32 : cmd_size - 1;
683 if (argc > 3)
684 addr = simple_strtoul(argv[3], NULL, 16);
685 if (argc > 4)
686 value = simple_strtoul(argv[4], NULL, 16);
687 case 'h': /* header */
688 #ifdef CONFIG_DM_PCI
689 case 'b': /* bars */
690 #endif
691 if (argc < 3)
692 goto usage;
693 if ((bdf = get_pci_dev(argv[2])) == -1)
694 return 1;
695 break;
696 #if defined(CONFIG_DM_PCI)
697 case 'e':
698 pci_init();
699 return 0;
700 #endif
701 case 'r': /* no break */
702 default: /* scan bus */
703 value = 1; /* short listing */
704 if (argc > 1) {
705 if (cmd != 'r' && argv[argc-1][0] == 'l') {
706 value = 0;
707 argc--;
708 }
709 if (argc > 1)
710 busnum = simple_strtoul(argv[1], NULL, 16);
711 }
712 #ifdef CONFIG_DM_PCI
713 ret = uclass_get_device_by_seq(UCLASS_PCI, busnum, &bus);
714 if (ret) {
715 printf("No such bus\n");
716 return CMD_RET_FAILURE;
717 }
718 if (cmd == 'r')
719 pci_show_regions(bus);
720 else
721 pciinfo(bus, value);
722 #else
723 pciinfo(busnum, value);
724 #endif
725 return 0;
726 }
727
728 #ifdef CONFIG_DM_PCI
729 ret = dm_pci_bus_find_bdf(bdf, &dev);
730 if (ret) {
731 printf("No such device\n");
732 return CMD_RET_FAILURE;
733 }
734 #else
735 dev = bdf;
736 #endif
737
738 switch (argv[1][0]) {
739 case 'h': /* header */
740 pci_header_show(dev);
741 break;
742 case 'd': /* display */
743 return pci_cfg_display(dev, addr, size, value);
744 case 'n': /* next */
745 if (argc < 4)
746 goto usage;
747 ret = pci_cfg_modify(dev, addr, size, value, 0);
748 break;
749 case 'm': /* modify */
750 if (argc < 4)
751 goto usage;
752 ret = pci_cfg_modify(dev, addr, size, value, 1);
753 break;
754 case 'w': /* write */
755 if (argc < 5)
756 goto usage;
757 #ifdef CONFIG_DM_PCI
758 ret = dm_pci_write_config(dev, addr, value, size);
759 #else
760 ret = pci_cfg_write(dev, addr, size, value);
761 #endif
762 break;
763 #ifdef CONFIG_DM_PCI
764
765 case 'b': /* bars */
766 return pci_bar_show(dev);
767 #endif
768 default:
769 ret = CMD_RET_USAGE;
770 break;
771 }
772
773 return ret;
774 usage:
775 return CMD_RET_USAGE;
776 }
777
778 /***************************************************/
779
780 #ifdef CONFIG_SYS_LONGHELP
781 static char pci_help_text[] =
782 "[bus] [long]\n"
783 " - short or long list of PCI devices on bus 'bus'\n"
784 #if defined(CONFIG_DM_PCI)
785 "pci enum\n"
786 " - Enumerate PCI buses\n"
787 #endif
788 "pci header b.d.f\n"
789 " - show header of PCI device 'bus.device.function'\n"
790 #ifdef CONFIG_DM_PCI
791 "pci bar b.d.f\n"
792 " - show BARs base and size for device b.d.f'\n"
793 "pci regions\n"
794 " - show PCI regions\n"
795 #endif
796 "pci display[.b, .w, .l] b.d.f [address] [# of objects]\n"
797 " - display PCI configuration space (CFG)\n"
798 "pci next[.b, .w, .l] b.d.f address\n"
799 " - modify, read and keep CFG address\n"
800 "pci modify[.b, .w, .l] b.d.f address\n"
801 " - modify, auto increment CFG address\n"
802 "pci write[.b, .w, .l] b.d.f address value\n"
803 " - write to CFG address";
804 #endif
805
806 U_BOOT_CMD(
807 pci, 5, 1, do_pci,
808 "list and access PCI Configuration Space", pci_help_text
809 );
810