1 /*
2 * Driver for NAND support, Rick Bronson
3 * borrowed heavily from:
4 * (c) 1999 Machine Vision Holdings, Inc.
5 * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
6 *
7 * Ported 'dynenv' to 'nand env.oob' command
8 * (C) 2010 Nanometrics, Inc.
9 * 'dynenv' -- Dynamic environment offset in NAND OOB
10 * (C) Copyright 2006-2007 OpenMoko, Inc.
11 * Added 16-bit nand support
12 * (C) 2004 Texas Instruments
13 *
14 * Copyright 2010, 2012 Freescale Semiconductor
15 * The portions of this file whose copyright is held by Freescale and which
16 * are not considered a derived work of GPL v2-only code may be distributed
17 * and/or modified under the terms of the GNU General Public License as
18 * published by the Free Software Foundation; either version 2 of the
19 * License, or (at your option) any later version.
20 */
21
22 #include <common.h>
23 #include <linux/mtd/mtd.h>
24 #include <command.h>
25 #include <console.h>
26 #include <watchdog.h>
27 #include <malloc.h>
28 #include <asm/byteorder.h>
29 #include <jffs2/jffs2.h>
30 #include <nand.h>
31
32 #if defined(CONFIG_CMD_MTDPARTS)
33
34 /* partition handling routines */
35 int mtdparts_init(void);
36 int id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *dev_num);
37 int find_dev_and_part(const char *id, struct mtd_device **dev,
38 u8 *part_num, struct part_info **part);
39 #endif
40
nand_dump(struct mtd_info * mtd,ulong off,int only_oob,int repeat)41 static int nand_dump(struct mtd_info *mtd, ulong off, int only_oob,
42 int repeat)
43 {
44 int i;
45 u_char *datbuf, *oobbuf, *p;
46 static loff_t last;
47 int ret = 0;
48
49 if (repeat)
50 off = last + mtd->writesize;
51
52 last = off;
53
54 datbuf = memalign(ARCH_DMA_MINALIGN, mtd->writesize);
55 if (!datbuf) {
56 puts("No memory for page buffer\n");
57 return 1;
58 }
59
60 oobbuf = memalign(ARCH_DMA_MINALIGN, mtd->oobsize);
61 if (!oobbuf) {
62 puts("No memory for page buffer\n");
63 ret = 1;
64 goto free_dat;
65 }
66 off &= ~(mtd->writesize - 1);
67 loff_t addr = (loff_t) off;
68 struct mtd_oob_ops ops;
69 memset(&ops, 0, sizeof(ops));
70 ops.datbuf = datbuf;
71 ops.oobbuf = oobbuf;
72 ops.len = mtd->writesize;
73 ops.ooblen = mtd->oobsize;
74 ops.mode = MTD_OPS_RAW;
75 i = mtd_read_oob(mtd, addr, &ops);
76 if (i < 0) {
77 printf("Error (%d) reading page %08lx\n", i, off);
78 ret = 1;
79 goto free_all;
80 }
81 printf("Page %08lx dump:\n", off);
82
83 if (!only_oob) {
84 i = mtd->writesize >> 4;
85 p = datbuf;
86
87 while (i--) {
88 printf("\t%02x %02x %02x %02x %02x %02x %02x %02x"
89 " %02x %02x %02x %02x %02x %02x %02x %02x\n",
90 p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7],
91 p[8], p[9], p[10], p[11], p[12], p[13], p[14],
92 p[15]);
93 p += 16;
94 }
95 }
96
97 puts("OOB:\n");
98 i = mtd->oobsize >> 3;
99 p = oobbuf;
100 while (i--) {
101 printf("\t%02x %02x %02x %02x %02x %02x %02x %02x\n",
102 p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]);
103 p += 8;
104 }
105
106 free_all:
107 free(oobbuf);
108 free_dat:
109 free(datbuf);
110
111 return ret;
112 }
113
114 /* ------------------------------------------------------------------------- */
115
set_dev(int dev)116 static int set_dev(int dev)
117 {
118 struct mtd_info *mtd = get_nand_dev_by_index(dev);
119
120 if (!mtd)
121 return -ENODEV;
122
123 if (nand_curr_device == dev)
124 return 0;
125
126 printf("Device %d: %s", dev, mtd->name);
127 puts("... is now current device\n");
128 nand_curr_device = dev;
129
130 #ifdef CONFIG_SYS_NAND_SELECT_DEVICE
131 board_nand_select_device(mtd_to_nand(mtd), dev);
132 #endif
133
134 return 0;
135 }
136
137 #ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
print_status(ulong start,ulong end,ulong erasesize,int status)138 static void print_status(ulong start, ulong end, ulong erasesize, int status)
139 {
140 /*
141 * Micron NAND flash (e.g. MT29F4G08ABADAH4) BLOCK LOCK READ STATUS is
142 * not the same as others. Instead of bit 1 being lock, it is
143 * #lock_tight. To make the driver support either format, ignore bit 1
144 * and use only bit 0 and bit 2.
145 */
146 printf("%08lx - %08lx: %08lx blocks %s%s%s\n",
147 start,
148 end - 1,
149 (end - start) / erasesize,
150 ((status & NAND_LOCK_STATUS_TIGHT) ? "TIGHT " : ""),
151 (!(status & NAND_LOCK_STATUS_UNLOCK) ? "LOCK " : ""),
152 ((status & NAND_LOCK_STATUS_UNLOCK) ? "UNLOCK " : ""));
153 }
154
do_nand_status(struct mtd_info * mtd)155 static void do_nand_status(struct mtd_info *mtd)
156 {
157 ulong block_start = 0;
158 ulong off;
159 int last_status = -1;
160
161 struct nand_chip *nand_chip = mtd_to_nand(mtd);
162 /* check the WP bit */
163 nand_chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
164 printf("device is %swrite protected\n",
165 (nand_chip->read_byte(mtd) & 0x80 ?
166 "NOT " : ""));
167
168 for (off = 0; off < mtd->size; off += mtd->erasesize) {
169 int s = nand_get_lock_status(mtd, off);
170
171 /* print message only if status has changed */
172 if (s != last_status && off != 0) {
173 print_status(block_start, off, mtd->erasesize,
174 last_status);
175 block_start = off;
176 }
177 last_status = s;
178 }
179 /* Print the last block info */
180 print_status(block_start, off, mtd->erasesize, last_status);
181 }
182 #endif
183
184 #ifdef CONFIG_ENV_OFFSET_OOB
185 unsigned long nand_env_oob_offset;
186
do_nand_env_oob(cmd_tbl_t * cmdtp,int argc,char * const argv[])187 int do_nand_env_oob(cmd_tbl_t *cmdtp, int argc, char *const argv[])
188 {
189 int ret;
190 uint32_t oob_buf[ENV_OFFSET_SIZE/sizeof(uint32_t)];
191 struct mtd_info *mtd = get_nand_dev_by_index(0);
192 char *cmd = argv[1];
193
194 if (CONFIG_SYS_MAX_NAND_DEVICE == 0 || !mtd) {
195 puts("no devices available\n");
196 return 1;
197 }
198
199 set_dev(0);
200
201 if (!strcmp(cmd, "get")) {
202 ret = get_nand_env_oob(mtd, &nand_env_oob_offset);
203 if (ret)
204 return 1;
205
206 printf("0x%08lx\n", nand_env_oob_offset);
207 } else if (!strcmp(cmd, "set")) {
208 loff_t addr;
209 loff_t maxsize;
210 struct mtd_oob_ops ops;
211 int idx = 0;
212
213 if (argc < 3)
214 goto usage;
215
216 mtd = get_nand_dev_by_index(idx);
217 /* We don't care about size, or maxsize. */
218 if (mtd_arg_off(argv[2], &idx, &addr, &maxsize, &maxsize,
219 MTD_DEV_TYPE_NAND, mtd->size)) {
220 puts("Offset or partition name expected\n");
221 return 1;
222 }
223 if (set_dev(idx)) {
224 puts("Offset or partition name expected\n");
225 return 1;
226 }
227
228 if (idx != 0) {
229 puts("Partition not on first NAND device\n");
230 return 1;
231 }
232
233 if (mtd->oobavail < ENV_OFFSET_SIZE) {
234 printf("Insufficient available OOB bytes:\n"
235 "%d OOB bytes available but %d required for "
236 "env.oob support\n",
237 mtd->oobavail, ENV_OFFSET_SIZE);
238 return 1;
239 }
240
241 if ((addr & (mtd->erasesize - 1)) != 0) {
242 printf("Environment offset must be block-aligned\n");
243 return 1;
244 }
245
246 ops.datbuf = NULL;
247 ops.mode = MTD_OOB_AUTO;
248 ops.ooboffs = 0;
249 ops.ooblen = ENV_OFFSET_SIZE;
250 ops.oobbuf = (void *) oob_buf;
251
252 oob_buf[0] = ENV_OOB_MARKER;
253 oob_buf[1] = addr / mtd->erasesize;
254
255 ret = mtd->write_oob(mtd, ENV_OFFSET_SIZE, &ops);
256 if (ret) {
257 printf("Error writing OOB block 0\n");
258 return ret;
259 }
260
261 ret = get_nand_env_oob(mtd, &nand_env_oob_offset);
262 if (ret) {
263 printf("Error reading env offset in OOB\n");
264 return ret;
265 }
266
267 if (addr != nand_env_oob_offset) {
268 printf("Verification of env offset in OOB failed: "
269 "0x%08llx expected but got 0x%08lx\n",
270 (unsigned long long)addr, nand_env_oob_offset);
271 return 1;
272 }
273 } else {
274 goto usage;
275 }
276
277 return ret;
278
279 usage:
280 return CMD_RET_USAGE;
281 }
282
283 #endif
284
nand_print_and_set_info(int idx)285 static void nand_print_and_set_info(int idx)
286 {
287 struct mtd_info *mtd;
288 struct nand_chip *chip;
289
290 mtd = get_nand_dev_by_index(idx);
291 if (!mtd)
292 return;
293
294 chip = mtd_to_nand(mtd);
295 printf("Device %d: ", idx);
296 if (chip->numchips > 1)
297 printf("%dx ", chip->numchips);
298 printf("%s, sector size %u KiB\n",
299 mtd->name, mtd->erasesize >> 10);
300 printf(" Page size %8d b\n", mtd->writesize);
301 printf(" OOB size %8d b\n", mtd->oobsize);
302 printf(" Erase size %8d b\n", mtd->erasesize);
303 printf(" subpagesize %8d b\n", chip->subpagesize);
304 printf(" options 0x%08x\n", chip->options);
305 printf(" bbt options 0x%08x\n", chip->bbt_options);
306
307 /* Set geometry info */
308 env_set_hex("nand_writesize", mtd->writesize);
309 env_set_hex("nand_oobsize", mtd->oobsize);
310 env_set_hex("nand_erasesize", mtd->erasesize);
311 }
312
raw_access(struct mtd_info * mtd,ulong addr,loff_t off,ulong count,int read,int no_verify)313 static int raw_access(struct mtd_info *mtd, ulong addr, loff_t off,
314 ulong count, int read, int no_verify)
315 {
316 int ret = 0;
317
318 while (count--) {
319 /* Raw access */
320 mtd_oob_ops_t ops = {
321 .datbuf = (u8 *)addr,
322 .oobbuf = ((u8 *)addr) + mtd->writesize,
323 .len = mtd->writesize,
324 .ooblen = mtd->oobsize,
325 .mode = MTD_OPS_RAW
326 };
327
328 if (read) {
329 ret = mtd_read_oob(mtd, off, &ops);
330 } else {
331 ret = mtd_write_oob(mtd, off, &ops);
332 if (!ret && !no_verify)
333 ret = nand_verify_page_oob(mtd, &ops, off);
334 }
335
336 if (ret) {
337 printf("%s: error at offset %llx, ret %d\n",
338 __func__, (long long)off, ret);
339 break;
340 }
341
342 addr += mtd->writesize + mtd->oobsize;
343 off += mtd->writesize;
344 }
345
346 return ret;
347 }
348
349 /* Adjust a chip/partition size down for bad blocks so we don't
350 * read/write past the end of a chip/partition by accident.
351 */
adjust_size_for_badblocks(loff_t * size,loff_t offset,int dev)352 static void adjust_size_for_badblocks(loff_t *size, loff_t offset, int dev)
353 {
354 /* We grab the nand info object here fresh because this is usually
355 * called after arg_off_size() which can change the value of dev.
356 */
357 struct mtd_info *mtd = get_nand_dev_by_index(dev);
358 loff_t maxoffset = offset + *size;
359 int badblocks = 0;
360
361 /* count badblocks in NAND from offset to offset + size */
362 for (; offset < maxoffset; offset += mtd->erasesize) {
363 if (nand_block_isbad(mtd, offset))
364 badblocks++;
365 }
366 /* adjust size if any bad blocks found */
367 if (badblocks) {
368 *size -= badblocks * mtd->erasesize;
369 printf("size adjusted to 0x%llx (%d bad blocks)\n",
370 (unsigned long long)*size, badblocks);
371 }
372 }
373
do_nand(cmd_tbl_t * cmdtp,int flag,int argc,char * const argv[])374 static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
375 {
376 int i, ret = 0;
377 ulong addr;
378 loff_t off, size, maxsize;
379 char *cmd, *s;
380 struct mtd_info *mtd;
381 #ifdef CONFIG_SYS_NAND_QUIET
382 int quiet = CONFIG_SYS_NAND_QUIET;
383 #else
384 int quiet = 0;
385 #endif
386 const char *quiet_str = env_get("quiet");
387 int dev = nand_curr_device;
388 int repeat = flag & CMD_FLAG_REPEAT;
389
390 /* at least two arguments please */
391 if (argc < 2)
392 goto usage;
393
394 if (quiet_str)
395 quiet = simple_strtoul(quiet_str, NULL, 0) != 0;
396
397 cmd = argv[1];
398
399 /* Only "dump" is repeatable. */
400 if (repeat && strcmp(cmd, "dump"))
401 return 0;
402
403 if (strcmp(cmd, "info") == 0) {
404
405 putc('\n');
406 for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
407 nand_print_and_set_info(i);
408 return 0;
409 }
410
411 if (strcmp(cmd, "device") == 0) {
412 if (argc < 3) {
413 putc('\n');
414 if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE)
415 puts("no devices available\n");
416 else
417 nand_print_and_set_info(dev);
418 return 0;
419 }
420
421 dev = (int)simple_strtoul(argv[2], NULL, 10);
422 set_dev(dev);
423
424 return 0;
425 }
426
427 #ifdef CONFIG_ENV_OFFSET_OOB
428 /* this command operates only on the first nand device */
429 if (strcmp(cmd, "env.oob") == 0)
430 return do_nand_env_oob(cmdtp, argc - 1, argv + 1);
431 #endif
432
433 /* The following commands operate on the current device, unless
434 * overridden by a partition specifier. Note that if somehow the
435 * current device is invalid, it will have to be changed to a valid
436 * one before these commands can run, even if a partition specifier
437 * for another device is to be used.
438 */
439 mtd = get_nand_dev_by_index(dev);
440 if (!mtd) {
441 puts("\nno devices available\n");
442 return 1;
443 }
444
445 if (strcmp(cmd, "bad") == 0) {
446 printf("\nDevice %d bad blocks:\n", dev);
447 for (off = 0; off < mtd->size; off += mtd->erasesize)
448 if (nand_block_isbad(mtd, off))
449 printf(" %08llx\n", (unsigned long long)off);
450 return 0;
451 }
452
453 /*
454 * Syntax is:
455 * 0 1 2 3 4
456 * nand erase [clean] [off size]
457 */
458 if (strncmp(cmd, "erase", 5) == 0 || strncmp(cmd, "scrub", 5) == 0) {
459 nand_erase_options_t opts;
460 /* "clean" at index 2 means request to write cleanmarker */
461 int clean = argc > 2 && !strcmp("clean", argv[2]);
462 int scrub_yes = argc > 2 && !strcmp("-y", argv[2]);
463 int o = (clean || scrub_yes) ? 3 : 2;
464 int scrub = !strncmp(cmd, "scrub", 5);
465 int spread = 0;
466 int args = 2;
467 const char *scrub_warn =
468 "Warning: "
469 "scrub option will erase all factory set bad blocks!\n"
470 " "
471 "There is no reliable way to recover them.\n"
472 " "
473 "Use this command only for testing purposes if you\n"
474 " "
475 "are sure of what you are doing!\n"
476 "\nReally scrub this NAND flash? <y/N>\n";
477
478 if (cmd[5] != 0) {
479 if (!strcmp(&cmd[5], ".spread")) {
480 spread = 1;
481 } else if (!strcmp(&cmd[5], ".part")) {
482 args = 1;
483 } else if (!strcmp(&cmd[5], ".chip")) {
484 args = 0;
485 } else {
486 goto usage;
487 }
488 }
489
490 /*
491 * Don't allow missing arguments to cause full chip/partition
492 * erases -- easy to do accidentally, e.g. with a misspelled
493 * variable name.
494 */
495 if (argc != o + args)
496 goto usage;
497
498 printf("\nNAND %s: ", cmd);
499 /* skip first two or three arguments, look for offset and size */
500 if (mtd_arg_off_size(argc - o, argv + o, &dev, &off, &size,
501 &maxsize, MTD_DEV_TYPE_NAND,
502 mtd->size) != 0)
503 return 1;
504
505 if (set_dev(dev))
506 return 1;
507
508 mtd = get_nand_dev_by_index(dev);
509
510 memset(&opts, 0, sizeof(opts));
511 opts.offset = off;
512 opts.length = size;
513 opts.jffs2 = clean;
514 opts.quiet = quiet;
515 opts.spread = spread;
516
517 if (scrub) {
518 if (scrub_yes) {
519 opts.scrub = 1;
520 } else {
521 puts(scrub_warn);
522 if (confirm_yesno()) {
523 opts.scrub = 1;
524 } else {
525 puts("scrub aborted\n");
526 return 1;
527 }
528 }
529 }
530 ret = nand_erase_opts(mtd, &opts);
531 printf("%s\n", ret ? "ERROR" : "OK");
532
533 return ret == 0 ? 0 : 1;
534 }
535
536 if (strncmp(cmd, "dump", 4) == 0) {
537 if (argc < 3)
538 goto usage;
539
540 off = (int)simple_strtoul(argv[2], NULL, 16);
541 ret = nand_dump(mtd, off, !strcmp(&cmd[4], ".oob"), repeat);
542
543 return ret == 0 ? 1 : 0;
544 }
545
546 if (strncmp(cmd, "read", 4) == 0 || strncmp(cmd, "write", 5) == 0) {
547 size_t rwsize;
548 ulong pagecount = 1;
549 int read;
550 int raw = 0;
551 int no_verify = 0;
552
553 if (argc < 4)
554 goto usage;
555
556 addr = (ulong)simple_strtoul(argv[2], NULL, 16);
557
558 read = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */
559 printf("\nNAND %s: ", read ? "read" : "write");
560
561 s = strchr(cmd, '.');
562
563 if (s && !strncmp(s, ".raw", 4)) {
564 raw = 1;
565
566 if (!strcmp(s, ".raw.noverify"))
567 no_verify = 1;
568
569 if (mtd_arg_off(argv[3], &dev, &off, &size, &maxsize,
570 MTD_DEV_TYPE_NAND,
571 mtd->size))
572 return 1;
573
574 if (set_dev(dev))
575 return 1;
576
577 mtd = get_nand_dev_by_index(dev);
578
579 if (argc > 4 && !str2long(argv[4], &pagecount)) {
580 printf("'%s' is not a number\n", argv[4]);
581 return 1;
582 }
583
584 if (pagecount * mtd->writesize > size) {
585 puts("Size exceeds partition or device limit\n");
586 return -1;
587 }
588
589 rwsize = pagecount * (mtd->writesize + mtd->oobsize);
590 } else {
591 if (mtd_arg_off_size(argc - 3, argv + 3, &dev, &off,
592 &size, &maxsize,
593 MTD_DEV_TYPE_NAND,
594 mtd->size) != 0)
595 return 1;
596
597 if (set_dev(dev))
598 return 1;
599
600 /* size is unspecified */
601 if (argc < 5)
602 adjust_size_for_badblocks(&size, off, dev);
603 rwsize = size;
604 }
605
606 mtd = get_nand_dev_by_index(dev);
607
608 if (!s || !strcmp(s, ".jffs2") ||
609 !strcmp(s, ".e") || !strcmp(s, ".i")) {
610 if (read)
611 ret = nand_read_skip_bad(mtd, off, &rwsize,
612 NULL, maxsize,
613 (u_char *)addr);
614 else
615 ret = nand_write_skip_bad(mtd, off, &rwsize,
616 NULL, maxsize,
617 (u_char *)addr,
618 WITH_WR_VERIFY);
619 #ifdef CONFIG_CMD_NAND_TRIMFFS
620 } else if (!strcmp(s, ".trimffs")) {
621 if (read) {
622 printf("Unknown nand command suffix '%s'\n", s);
623 return 1;
624 }
625 ret = nand_write_skip_bad(mtd, off, &rwsize, NULL,
626 maxsize, (u_char *)addr,
627 WITH_DROP_FFS | WITH_WR_VERIFY);
628 #endif
629 } else if (!strcmp(s, ".oob")) {
630 /* out-of-band data */
631 mtd_oob_ops_t ops = {
632 .oobbuf = (u8 *)addr,
633 .ooblen = rwsize,
634 .mode = MTD_OPS_RAW
635 };
636
637 if (read)
638 ret = mtd_read_oob(mtd, off, &ops);
639 else
640 ret = mtd_write_oob(mtd, off, &ops);
641 } else if (raw) {
642 ret = raw_access(mtd, addr, off, pagecount, read,
643 no_verify);
644 } else {
645 printf("Unknown nand command suffix '%s'.\n", s);
646 return 1;
647 }
648
649 printf(" %zu bytes %s: %s\n", rwsize,
650 read ? "read" : "written", ret ? "ERROR" : "OK");
651
652 return ret == 0 ? 0 : 1;
653 }
654
655 #ifdef CONFIG_CMD_NAND_TORTURE
656 if (strcmp(cmd, "torture") == 0) {
657 loff_t endoff;
658 unsigned int failed = 0, passed = 0;
659
660 if (argc < 3)
661 goto usage;
662
663 if (!str2off(argv[2], &off)) {
664 puts("Offset is not a valid number\n");
665 return 1;
666 }
667
668 size = mtd->erasesize;
669 if (argc > 3) {
670 if (!str2off(argv[3], &size)) {
671 puts("Size is not a valid number\n");
672 return 1;
673 }
674 }
675
676 endoff = off + size;
677 if (endoff > mtd->size) {
678 puts("Arguments beyond end of NAND\n");
679 return 1;
680 }
681
682 off = round_down(off, mtd->erasesize);
683 endoff = round_up(endoff, mtd->erasesize);
684 size = endoff - off;
685 printf("\nNAND torture: device %d offset 0x%llx size 0x%llx (block size 0x%x)\n",
686 dev, off, size, mtd->erasesize);
687 while (off < endoff) {
688 ret = nand_torture(mtd, off);
689 if (ret) {
690 failed++;
691 printf(" block at 0x%llx failed\n", off);
692 } else {
693 passed++;
694 }
695 off += mtd->erasesize;
696 }
697 printf(" Passed: %u, failed: %u\n", passed, failed);
698 return failed != 0;
699 }
700 #endif
701
702 if (strcmp(cmd, "markbad") == 0) {
703 argc -= 2;
704 argv += 2;
705
706 if (argc <= 0)
707 goto usage;
708
709 while (argc > 0) {
710 addr = simple_strtoul(*argv, NULL, 16);
711
712 if (mtd_block_markbad(mtd, addr)) {
713 printf("block 0x%08lx NOT marked "
714 "as bad! ERROR %d\n",
715 addr, ret);
716 ret = 1;
717 } else {
718 printf("block 0x%08lx successfully "
719 "marked as bad\n",
720 addr);
721 }
722 --argc;
723 ++argv;
724 }
725 return ret;
726 }
727
728 if (strcmp(cmd, "biterr") == 0) {
729 /* todo */
730 return 1;
731 }
732
733 #ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
734 if (strcmp(cmd, "lock") == 0) {
735 int tight = 0;
736 int status = 0;
737 if (argc == 3) {
738 if (!strcmp("tight", argv[2]))
739 tight = 1;
740 if (!strcmp("status", argv[2]))
741 status = 1;
742 }
743 if (status) {
744 do_nand_status(mtd);
745 } else {
746 if (!nand_lock(mtd, tight)) {
747 puts("NAND flash successfully locked\n");
748 } else {
749 puts("Error locking NAND flash\n");
750 return 1;
751 }
752 }
753 return 0;
754 }
755
756 if (strncmp(cmd, "unlock", 5) == 0) {
757 int allexcept = 0;
758
759 s = strchr(cmd, '.');
760
761 if (s && !strcmp(s, ".allexcept"))
762 allexcept = 1;
763
764 if (mtd_arg_off_size(argc - 2, argv + 2, &dev, &off, &size,
765 &maxsize, MTD_DEV_TYPE_NAND,
766 mtd->size) < 0)
767 return 1;
768
769 if (set_dev(dev))
770 return 1;
771
772 mtd = get_nand_dev_by_index(dev);
773
774 if (!nand_unlock(mtd, off, size, allexcept)) {
775 puts("NAND flash successfully unlocked\n");
776 } else {
777 puts("Error unlocking NAND flash, "
778 "write and erase will probably fail\n");
779 return 1;
780 }
781 return 0;
782 }
783 #endif
784
785 usage:
786 return CMD_RET_USAGE;
787 }
788
789 #ifdef CONFIG_SYS_LONGHELP
790 static char nand_help_text[] =
791 "info - show available NAND devices\n"
792 "nand device [dev] - show or set current device\n"
793 "nand read - addr off|partition size\n"
794 "nand write - addr off|partition size\n"
795 " read/write 'size' bytes starting at offset 'off'\n"
796 " to/from memory address 'addr', skipping bad blocks.\n"
797 "nand read.raw - addr off|partition [count]\n"
798 "nand write.raw[.noverify] - addr off|partition [count]\n"
799 " Use read.raw/write.raw to avoid ECC and access the flash as-is.\n"
800 #ifdef CONFIG_CMD_NAND_TRIMFFS
801 "nand write.trimffs - addr off|partition size\n"
802 " write 'size' bytes starting at offset 'off' from memory address\n"
803 " 'addr', skipping bad blocks and dropping any pages at the end\n"
804 " of eraseblocks that contain only 0xFF\n"
805 #endif
806 "nand erase[.spread] [clean] off size - erase 'size' bytes "
807 "from offset 'off'\n"
808 " With '.spread', erase enough for given file size, otherwise,\n"
809 " 'size' includes skipped bad blocks.\n"
810 "nand erase.part [clean] partition - erase entire mtd partition'\n"
811 "nand erase.chip [clean] - erase entire chip'\n"
812 "nand bad - show bad blocks\n"
813 "nand dump[.oob] off - dump page\n"
814 #ifdef CONFIG_CMD_NAND_TORTURE
815 "nand torture off - torture one block at offset\n"
816 "nand torture off [size] - torture blocks from off to off+size\n"
817 #endif
818 "nand scrub [-y] off size | scrub.part partition | scrub.chip\n"
819 " really clean NAND erasing bad blocks (UNSAFE)\n"
820 "nand markbad off [...] - mark bad block(s) at offset (UNSAFE)\n"
821 "nand biterr off - make a bit error at offset (UNSAFE)"
822 #ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
823 "\n"
824 "nand lock [tight] [status]\n"
825 " bring nand to lock state or display locked pages\n"
826 "nand unlock[.allexcept] [offset] [size] - unlock section"
827 #endif
828 #ifdef CONFIG_ENV_OFFSET_OOB
829 "\n"
830 "nand env.oob - environment offset in OOB of block 0 of"
831 " first device.\n"
832 "nand env.oob set off|partition - set enviromnent offset\n"
833 "nand env.oob get - get environment offset"
834 #endif
835 "";
836 #endif
837
838 U_BOOT_CMD(
839 nand, CONFIG_SYS_MAXARGS, 1, do_nand,
840 "NAND sub-system", nand_help_text
841 );
842
nand_load_image(cmd_tbl_t * cmdtp,struct mtd_info * mtd,ulong offset,ulong addr,char * cmd)843 static int nand_load_image(cmd_tbl_t *cmdtp, struct mtd_info *mtd,
844 ulong offset, ulong addr, char *cmd)
845 {
846 int r;
847 char *s;
848 size_t cnt;
849 #if defined(CONFIG_IMAGE_FORMAT_LEGACY)
850 image_header_t *hdr;
851 #endif
852 #if defined(CONFIG_FIT)
853 const void *fit_hdr = NULL;
854 #endif
855
856 s = strchr(cmd, '.');
857 if (s != NULL &&
858 (strcmp(s, ".jffs2") && strcmp(s, ".e") && strcmp(s, ".i"))) {
859 printf("Unknown nand load suffix '%s'\n", s);
860 bootstage_error(BOOTSTAGE_ID_NAND_SUFFIX);
861 return 1;
862 }
863
864 printf("\nLoading from %s, offset 0x%lx\n", mtd->name, offset);
865
866 cnt = mtd->writesize;
867 r = nand_read_skip_bad(mtd, offset, &cnt, NULL, mtd->size,
868 (u_char *)addr);
869 if (r) {
870 puts("** Read error\n");
871 bootstage_error(BOOTSTAGE_ID_NAND_HDR_READ);
872 return 1;
873 }
874 bootstage_mark(BOOTSTAGE_ID_NAND_HDR_READ);
875
876 switch (genimg_get_format ((void *)addr)) {
877 #if defined(CONFIG_IMAGE_FORMAT_LEGACY)
878 case IMAGE_FORMAT_LEGACY:
879 hdr = (image_header_t *)addr;
880
881 bootstage_mark(BOOTSTAGE_ID_NAND_TYPE);
882 image_print_contents (hdr);
883
884 cnt = image_get_image_size (hdr);
885 break;
886 #endif
887 #if defined(CONFIG_FIT)
888 case IMAGE_FORMAT_FIT:
889 fit_hdr = (const void *)addr;
890 puts ("Fit image detected...\n");
891
892 cnt = fit_get_size (fit_hdr);
893 break;
894 #endif
895 default:
896 bootstage_error(BOOTSTAGE_ID_NAND_TYPE);
897 puts ("** Unknown image type\n");
898 return 1;
899 }
900 bootstage_mark(BOOTSTAGE_ID_NAND_TYPE);
901
902 r = nand_read_skip_bad(mtd, offset, &cnt, NULL, mtd->size,
903 (u_char *)addr);
904 if (r) {
905 puts("** Read error\n");
906 bootstage_error(BOOTSTAGE_ID_NAND_READ);
907 return 1;
908 }
909 bootstage_mark(BOOTSTAGE_ID_NAND_READ);
910
911 #if defined(CONFIG_FIT)
912 /* This cannot be done earlier, we need complete FIT image in RAM first */
913 if (genimg_get_format ((void *)addr) == IMAGE_FORMAT_FIT) {
914 if (!fit_check_format (fit_hdr)) {
915 bootstage_error(BOOTSTAGE_ID_NAND_FIT_READ);
916 puts ("** Bad FIT image format\n");
917 return 1;
918 }
919 bootstage_mark(BOOTSTAGE_ID_NAND_FIT_READ_OK);
920 fit_print_contents (fit_hdr);
921 }
922 #endif
923
924 /* Loading ok, update default load address */
925
926 load_addr = addr;
927
928 return bootm_maybe_autostart(cmdtp, cmd);
929 }
930
do_nandboot(cmd_tbl_t * cmdtp,int flag,int argc,char * const argv[])931 static int do_nandboot(cmd_tbl_t *cmdtp, int flag, int argc,
932 char * const argv[])
933 {
934 char *boot_device = NULL;
935 int idx;
936 ulong addr, offset = 0;
937 struct mtd_info *mtd;
938 #if defined(CONFIG_CMD_MTDPARTS)
939 struct mtd_device *dev;
940 struct part_info *part;
941 u8 pnum;
942
943 if (argc >= 2) {
944 char *p = (argc == 2) ? argv[1] : argv[2];
945 if (!(str2long(p, &addr)) && (mtdparts_init() == 0) &&
946 (find_dev_and_part(p, &dev, &pnum, &part) == 0)) {
947 if (dev->id->type != MTD_DEV_TYPE_NAND) {
948 puts("Not a NAND device\n");
949 return 1;
950 }
951 if (argc > 3)
952 goto usage;
953 if (argc == 3)
954 addr = simple_strtoul(argv[1], NULL, 16);
955 else
956 addr = CONFIG_SYS_LOAD_ADDR;
957
958 mtd = get_nand_dev_by_index(dev->id->num);
959 return nand_load_image(cmdtp, mtd, part->offset,
960 addr, argv[0]);
961 }
962 }
963 #endif
964
965 bootstage_mark(BOOTSTAGE_ID_NAND_PART);
966 switch (argc) {
967 case 1:
968 addr = CONFIG_SYS_LOAD_ADDR;
969 boot_device = env_get("bootdevice");
970 break;
971 case 2:
972 addr = simple_strtoul(argv[1], NULL, 16);
973 boot_device = env_get("bootdevice");
974 break;
975 case 3:
976 addr = simple_strtoul(argv[1], NULL, 16);
977 boot_device = argv[2];
978 break;
979 case 4:
980 addr = simple_strtoul(argv[1], NULL, 16);
981 boot_device = argv[2];
982 offset = simple_strtoul(argv[3], NULL, 16);
983 break;
984 default:
985 #if defined(CONFIG_CMD_MTDPARTS)
986 usage:
987 #endif
988 bootstage_error(BOOTSTAGE_ID_NAND_SUFFIX);
989 return CMD_RET_USAGE;
990 }
991 bootstage_mark(BOOTSTAGE_ID_NAND_SUFFIX);
992
993 if (!boot_device) {
994 puts("\n** No boot device **\n");
995 bootstage_error(BOOTSTAGE_ID_NAND_BOOT_DEVICE);
996 return 1;
997 }
998 bootstage_mark(BOOTSTAGE_ID_NAND_BOOT_DEVICE);
999
1000 idx = simple_strtoul(boot_device, NULL, 16);
1001
1002 mtd = get_nand_dev_by_index(idx);
1003 if (!mtd) {
1004 printf("\n** Device %d not available\n", idx);
1005 bootstage_error(BOOTSTAGE_ID_NAND_AVAILABLE);
1006 return 1;
1007 }
1008 bootstage_mark(BOOTSTAGE_ID_NAND_AVAILABLE);
1009
1010 return nand_load_image(cmdtp, mtd, offset, addr, argv[0]);
1011 }
1012
1013 U_BOOT_CMD(nboot, 4, 1, do_nandboot,
1014 "boot from NAND device",
1015 "[partition] | [[[loadAddr] dev] offset]"
1016 );
1017