xref: /openbmc/u-boot/board/udoo/udoo_spl.c (revision 2399e401)
1 /*
2  * Copyright (C) 2015 Udoo
3  * Author: Tungyi Lin <tungyilin1127@gmail.com>
4  *         Richard Hu <hakahu@gmail.com>
5  * Based on board/wandboard/spl.c
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8 
9 #include <asm/arch/clock.h>
10 #include <asm/arch/imx-regs.h>
11 #include <asm/arch/iomux.h>
12 #include <asm/arch/mx6-pins.h>
13 #include <linux/errno.h>
14 #include <asm/gpio.h>
15 #include <asm/imx-common/iomux-v3.h>
16 #include <asm/imx-common/video.h>
17 #include <mmc.h>
18 #include <fsl_esdhc.h>
19 #include <asm/arch/crm_regs.h>
20 #include <asm/io.h>
21 #include <asm/arch/sys_proto.h>
22 #include <spl.h>
23 
24 DECLARE_GLOBAL_DATA_PTR;
25 
26 #if defined(CONFIG_SPL_BUILD)
27 #include <asm/arch/mx6-ddr.h>
28 
29 /*
30  * Driving strength:
31  *   0x30 == 40 Ohm
32  *   0x28 == 48 Ohm
33  */
34 #define IMX6DQ_DRIVE_STRENGTH		0x30
35 #define IMX6SDL_DRIVE_STRENGTH	0x28
36 
37 /* configure MX6Q/DUAL mmdc DDR io registers */
38 static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = {
39 	.dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH,
40 	.dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH,
41 	.dram_cas = IMX6DQ_DRIVE_STRENGTH,
42 	.dram_ras = IMX6DQ_DRIVE_STRENGTH,
43 	.dram_reset = IMX6DQ_DRIVE_STRENGTH,
44 	.dram_sdcke0 = IMX6DQ_DRIVE_STRENGTH,
45 	.dram_sdcke1 = IMX6DQ_DRIVE_STRENGTH,
46 	.dram_sdba2 = 0x00000000,
47 	.dram_sdodt0 = IMX6DQ_DRIVE_STRENGTH,
48 	.dram_sdodt1 = IMX6DQ_DRIVE_STRENGTH,
49 	.dram_sdqs0 = IMX6DQ_DRIVE_STRENGTH,
50 	.dram_sdqs1 = IMX6DQ_DRIVE_STRENGTH,
51 	.dram_sdqs2 = IMX6DQ_DRIVE_STRENGTH,
52 	.dram_sdqs3 = IMX6DQ_DRIVE_STRENGTH,
53 	.dram_sdqs4 = IMX6DQ_DRIVE_STRENGTH,
54 	.dram_sdqs5 = IMX6DQ_DRIVE_STRENGTH,
55 	.dram_sdqs6 = IMX6DQ_DRIVE_STRENGTH,
56 	.dram_sdqs7 = IMX6DQ_DRIVE_STRENGTH,
57 	.dram_dqm0 = IMX6DQ_DRIVE_STRENGTH,
58 	.dram_dqm1 = IMX6DQ_DRIVE_STRENGTH,
59 	.dram_dqm2 = IMX6DQ_DRIVE_STRENGTH,
60 	.dram_dqm3 = IMX6DQ_DRIVE_STRENGTH,
61 	.dram_dqm4 = IMX6DQ_DRIVE_STRENGTH,
62 	.dram_dqm5 = IMX6DQ_DRIVE_STRENGTH,
63 	.dram_dqm6 = IMX6DQ_DRIVE_STRENGTH,
64 	.dram_dqm7 = IMX6DQ_DRIVE_STRENGTH,
65 };
66 
67 /* configure MX6Q/DUAL mmdc GRP io registers */
68 static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = {
69 	.grp_ddr_type = 0x000c0000,
70 	.grp_ddrmode_ctl = 0x00020000,
71 	.grp_ddrpke = 0x00000000,
72 	.grp_addds = IMX6DQ_DRIVE_STRENGTH,
73 	.grp_ctlds = IMX6DQ_DRIVE_STRENGTH,
74 	.grp_ddrmode = 0x00020000,
75 	.grp_b0ds = IMX6DQ_DRIVE_STRENGTH,
76 	.grp_b1ds = IMX6DQ_DRIVE_STRENGTH,
77 	.grp_b2ds = IMX6DQ_DRIVE_STRENGTH,
78 	.grp_b3ds = IMX6DQ_DRIVE_STRENGTH,
79 	.grp_b4ds = IMX6DQ_DRIVE_STRENGTH,
80 	.grp_b5ds = IMX6DQ_DRIVE_STRENGTH,
81 	.grp_b6ds = IMX6DQ_DRIVE_STRENGTH,
82 	.grp_b7ds = IMX6DQ_DRIVE_STRENGTH,
83 };
84 
85 /* configure MX6SOLO/DUALLITE mmdc DDR io registers */
86 struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = {
87 	.dram_sdclk_0 = IMX6SDL_DRIVE_STRENGTH,
88 	.dram_sdclk_1 = IMX6SDL_DRIVE_STRENGTH,
89 	.dram_cas = IMX6SDL_DRIVE_STRENGTH,
90 	.dram_ras = IMX6SDL_DRIVE_STRENGTH,
91 	.dram_reset = IMX6SDL_DRIVE_STRENGTH,
92 	.dram_sdcke0 = IMX6SDL_DRIVE_STRENGTH,
93 	.dram_sdcke1 = IMX6SDL_DRIVE_STRENGTH,
94 	.dram_sdba2 = 0x00000000,
95 	.dram_sdodt0 = IMX6SDL_DRIVE_STRENGTH,
96 	.dram_sdodt1 = IMX6SDL_DRIVE_STRENGTH,
97 	.dram_sdqs0 = IMX6SDL_DRIVE_STRENGTH,
98 	.dram_sdqs1 = IMX6SDL_DRIVE_STRENGTH,
99 	.dram_sdqs2 = IMX6SDL_DRIVE_STRENGTH,
100 	.dram_sdqs3 = IMX6SDL_DRIVE_STRENGTH,
101 	.dram_sdqs4 = IMX6SDL_DRIVE_STRENGTH,
102 	.dram_sdqs5 = IMX6SDL_DRIVE_STRENGTH,
103 	.dram_sdqs6 = IMX6SDL_DRIVE_STRENGTH,
104 	.dram_sdqs7 = IMX6SDL_DRIVE_STRENGTH,
105 	.dram_dqm0 = IMX6SDL_DRIVE_STRENGTH,
106 	.dram_dqm1 = IMX6SDL_DRIVE_STRENGTH,
107 	.dram_dqm2 = IMX6SDL_DRIVE_STRENGTH,
108 	.dram_dqm3 = IMX6SDL_DRIVE_STRENGTH,
109 	.dram_dqm4 = IMX6SDL_DRIVE_STRENGTH,
110 	.dram_dqm5 = IMX6SDL_DRIVE_STRENGTH,
111 	.dram_dqm6 = IMX6SDL_DRIVE_STRENGTH,
112 	.dram_dqm7 = IMX6SDL_DRIVE_STRENGTH,
113 };
114 
115 /* configure MX6SOLO/DUALLITE mmdc GRP io registers */
116 struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
117 	.grp_ddr_type = 0x000c0000,
118 	.grp_ddrmode_ctl = 0x00020000,
119 	.grp_ddrpke = 0x00000000,
120 	.grp_addds = IMX6SDL_DRIVE_STRENGTH,
121 	.grp_ctlds = IMX6SDL_DRIVE_STRENGTH,
122 	.grp_ddrmode = 0x00020000,
123 	.grp_b0ds = IMX6SDL_DRIVE_STRENGTH,
124 	.grp_b1ds = IMX6SDL_DRIVE_STRENGTH,
125 	.grp_b2ds = IMX6SDL_DRIVE_STRENGTH,
126 	.grp_b3ds = IMX6SDL_DRIVE_STRENGTH,
127 	.grp_b4ds = IMX6SDL_DRIVE_STRENGTH,
128 	.grp_b5ds = IMX6SDL_DRIVE_STRENGTH,
129 	.grp_b6ds = IMX6SDL_DRIVE_STRENGTH,
130 	.grp_b7ds = IMX6SDL_DRIVE_STRENGTH,
131 };
132 
133 /* MT41K128M16JT-125 */
134 static struct mx6_ddr3_cfg mt41k128m16jt_125 = {
135 	/* quad = 1066, duallite = 800 */
136 	.mem_speed = 1066,
137 	.density = 2,
138 	.width = 16,
139 	.banks = 8,
140 	.rowaddr = 14,
141 	.coladdr = 10,
142 	.pagesz = 2,
143 	.trcd = 1375,
144 	.trcmin = 4875,
145 	.trasmin = 3500,
146 	.SRT = 0,
147 };
148 
149 static struct mx6_mmdc_calibration mx6q_1g_mmdc_calib = {
150 	.p0_mpwldectrl0 = 0x00350035,
151 	.p0_mpwldectrl1 = 0x001F001F,
152 	.p1_mpwldectrl0 = 0x00010001,
153 	.p1_mpwldectrl1 = 0x00010001,
154 	.p0_mpdgctrl0 = 0x43510360,
155 	.p0_mpdgctrl1 = 0x0342033F,
156 	.p1_mpdgctrl0 = 0x033F033F,
157 	.p1_mpdgctrl1 = 0x03290266,
158 	.p0_mprddlctl = 0x4B3E4141,
159 	.p1_mprddlctl = 0x47413B4A,
160 	.p0_mpwrdlctl = 0x42404843,
161 	.p1_mpwrdlctl = 0x4C3F4C45,
162 };
163 
164 static struct mx6_mmdc_calibration mx6dl_1g_mmdc_calib = {
165 	.p0_mpwldectrl0 = 0x002F0038,
166 	.p0_mpwldectrl1 = 0x001F001F,
167 	.p1_mpwldectrl0 = 0x001F001F,
168 	.p1_mpwldectrl1 = 0x001F001F,
169 	.p0_mpdgctrl0 = 0x425C0251,
170 	.p0_mpdgctrl1 = 0x021B021E,
171 	.p1_mpdgctrl0 = 0x021B021E,
172 	.p1_mpdgctrl1 = 0x01730200,
173 	.p0_mprddlctl = 0x45474C45,
174 	.p1_mprddlctl = 0x44464744,
175 	.p0_mpwrdlctl = 0x3F3F3336,
176 	.p1_mpwrdlctl = 0x32383630,
177 };
178 
179 /* DDR 64bit 1GB */
180 static struct mx6_ddr_sysinfo mem_qdl = {
181 	.dsize = 2,
182 	.cs1_mirror = 0,
183 	/* config for full 4GB range so that get_mem_size() works */
184 	.cs_density = 32,
185 	.ncs = 1,
186 	.bi_on = 1,
187 	/* quad = 2, duallite = 1 */
188 	.rtt_nom = 2,
189 	/* quad = 2, duallite = 1 */
190 	.rtt_wr = 2,
191 	.ralat = 5,
192 	.walat = 0,
193 	.mif3_mode = 3,
194 	.rst_to_cke = 0x23,
195 	.sde_to_rst = 0x10,
196 	.refsel = 1,	/* Refresh cycles at 32KHz */
197 	.refr = 7,	/* 8 refresh commands per refresh cycle */
198 };
199 
200 static void ccgr_init(void)
201 {
202 	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
203 
204 	/* set the default clock gate to save power */
205 	writel(0x00C03F3F, &ccm->CCGR0);
206 	writel(0x0030FC03, &ccm->CCGR1);
207 	writel(0x0FFFC000, &ccm->CCGR2);
208 	writel(0x3FF00000, &ccm->CCGR3);
209 	writel(0x00FFF300, &ccm->CCGR4);
210 	writel(0x0F0000C3, &ccm->CCGR5);
211 	writel(0x000003FF, &ccm->CCGR6);
212 }
213 
214 static void gpr_init(void)
215 {
216 	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
217 
218 	/* enable AXI cache for VDOA/VPU/IPU */
219 	writel(0xF00000FF, &iomux->gpr[4]);
220 	/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
221 	writel(0x007F007F, &iomux->gpr[6]);
222 	writel(0x007F007F, &iomux->gpr[7]);
223 }
224 
225 static void spl_dram_init(void)
226 {
227 	if (is_cpu_type(MXC_CPU_MX6DL)) {
228 		mt41k128m16jt_125.mem_speed = 800;
229 		mem_qdl.rtt_nom = 1;
230 		mem_qdl.rtt_wr = 1;
231 
232 		mx6sdl_dram_iocfg(64, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
233 		mx6_dram_cfg(&mem_qdl, &mx6dl_1g_mmdc_calib, &mt41k128m16jt_125);
234 	} else if (is_cpu_type(MXC_CPU_MX6Q)) {
235 		mt41k128m16jt_125.mem_speed = 1066;
236 		mem_qdl.rtt_nom = 2;
237 		mem_qdl.rtt_wr = 2;
238 
239 		mx6dq_dram_iocfg(64, &mx6dq_ddr_ioregs, &mx6dq_grp_ioregs);
240 		mx6_dram_cfg(&mem_qdl, &mx6q_1g_mmdc_calib, &mt41k128m16jt_125);
241 	}
242 
243 	udelay(100);
244 }
245 
246 void board_init_f(ulong dummy)
247 {
248 	ccgr_init();
249 
250 	/* setup AIPS and disable watchdog */
251 	arch_cpu_init();
252 
253 	gpr_init();
254 
255 	/* iomux */
256 	board_early_init_f();
257 
258 	/* setup GP timer */
259 	timer_init();
260 
261 	/* UART clocks enabled and gd valid - init serial console */
262 	preloader_console_init();
263 
264 	/* DDR initialization */
265 	spl_dram_init();
266 
267 	/* Clear the BSS. */
268 	memset(__bss_start, 0, __bss_end - __bss_start);
269 
270 	/* load/boot image from boot device */
271 	board_init_r(NULL, 0);
272 }
273 #endif
274