1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Copyright (C) 2010 Freescale Semiconductor, Inc.
4 * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
5 */
6
7 #include <common.h>
8 #include <i2c.h>
9 #include <linux/libfdt.h>
10 #include <fdt_support.h>
11 #include <pci.h>
12 #include <mpc83xx.h>
13 #include <netdev.h>
14 #include <asm/io.h>
15 #include <asm/fsl_serdes.h>
16 #include <asm/fsl_mpc83xx_serdes.h>
17
checkboard(void)18 int checkboard(void)
19 {
20 printf("Board: MPC8308 P1M\n");
21
22 return 0;
23 }
24
25 static struct pci_region pcie_regions_0[] = {
26 {
27 .bus_start = CONFIG_SYS_PCIE1_MEM_BASE,
28 .phys_start = CONFIG_SYS_PCIE1_MEM_PHYS,
29 .size = CONFIG_SYS_PCIE1_MEM_SIZE,
30 .flags = PCI_REGION_MEM,
31 },
32 {
33 .bus_start = CONFIG_SYS_PCIE1_IO_BASE,
34 .phys_start = CONFIG_SYS_PCIE1_IO_PHYS,
35 .size = CONFIG_SYS_PCIE1_IO_SIZE,
36 .flags = PCI_REGION_IO,
37 },
38 };
39
pci_init_board(void)40 void pci_init_board(void)
41 {
42 immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
43 sysconf83xx_t *sysconf = &immr->sysconf;
44 law83xx_t *pcie_law = sysconf->pcielaw;
45 struct pci_region *pcie_reg[] = { pcie_regions_0 };
46
47 fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX,
48 FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
49
50 /* Deassert the resets in the control register */
51 out_be32(&sysconf->pecr1, 0xE0008000);
52 udelay(2000);
53
54 /* Configure PCI Express Local Access Windows */
55 out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR);
56 out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB);
57
58 mpc83xx_pcie_init(1, pcie_reg);
59 }
60
61 #if defined(CONFIG_OF_BOARD_SETUP)
ft_board_setup(void * blob,bd_t * bd)62 int ft_board_setup(void *blob, bd_t *bd)
63 {
64 ft_cpu_setup(blob, bd);
65 fsl_fdt_fixup_dr_usb(blob, bd);
66
67 return 0;
68 }
69 #endif
70
board_eth_init(bd_t * bis)71 int board_eth_init(bd_t *bis)
72 {
73 int rv, num_if = 0;
74
75 /* Initialize TSECs first */
76 rv = cpu_eth_init(bis);
77 if (rv >= 0)
78 num_if += rv;
79 else
80 printf("ERROR: failed to initialize TSECs.\n");
81
82 rv = pci_eth_init(bis);
83 if (rv >= 0)
84 num_if += rv;
85 else
86 printf("ERROR: failed to initialize PCI Ethernet.\n");
87
88 return num_if;
89 }
90