1 /* 2 * Copyright (C) ARM Ltd 2015 3 * 4 * Author: Liviu Dudau <Liviu.Dudau@arm.com> 5 * 6 * SPDX-Licence-Identifier: GPL-2.0+ 7 */ 8 9 #include <common.h> 10 #include <asm/io.h> 11 #include <linux/bitops.h> 12 #include <pci_ids.h> 13 #include "pcie.h" 14 15 /* XpressRICH3 support */ 16 #define XR3_CONFIG_BASE 0x7ff30000 17 #define XR3_RESET_BASE 0x7ff20000 18 19 #define XR3_PCI_ECAM_START 0x40000000 20 #define XR3_PCI_ECAM_SIZE 28 /* as power of 2 = 0x10000000 */ 21 #define XR3_PCI_IOSPACE_START 0x5f800000 22 #define XR3_PCI_IOSPACE_SIZE 23 /* as power of 2 = 0x800000 */ 23 #define XR3_PCI_MEMSPACE_START 0x50000000 24 #define XR3_PCI_MEMSPACE_SIZE 27 /* as power of 2 = 0x8000000 */ 25 #define XR3_PCI_MEMSPACE64_START 0x4000000000 26 #define XR3_PCI_MEMSPACE64_SIZE 33 /* as power of 2 = 0x200000000 */ 27 28 #define JUNO_V2M_MSI_START 0x2c1c0000 29 #define JUNO_V2M_MSI_SIZE 12 /* as power of 2 = 4096 */ 30 31 #define XR3PCI_BASIC_STATUS 0x18 32 #define XR3PCI_BS_GEN_MASK (0xf << 8) 33 #define XR3PCI_BS_LINK_MASK 0xff 34 35 #define XR3PCI_VIRTCHAN_CREDITS 0x90 36 #define XR3PCI_BRIDGE_PCI_IDS 0x9c 37 #define XR3PCI_PEX_SPC2 0xd8 38 39 #define XR3PCI_ATR_PCIE_WIN0 0x600 40 #define XR3PCI_ATR_PCIE_WIN1 0x700 41 #define XR3PCI_ATR_AXI4_SLV0 0x800 42 43 #define XR3PCI_ATR_TABLE_SIZE 0x20 44 #define XR3PCI_ATR_SRC_ADDR_LOW 0x0 45 #define XR3PCI_ATR_SRC_ADDR_HIGH 0x4 46 #define XR3PCI_ATR_TRSL_ADDR_LOW 0x8 47 #define XR3PCI_ATR_TRSL_ADDR_HIGH 0xc 48 #define XR3PCI_ATR_TRSL_PARAM 0x10 49 50 /* IDs used in the XR3PCI_ATR_TRSL_PARAM */ 51 #define XR3PCI_ATR_TRSLID_AXIDEVICE (0x420004) 52 #define XR3PCI_ATR_TRSLID_AXIMEMORY (0x4e0004) /* Write-through, read/write allocate */ 53 #define XR3PCI_ATR_TRSLID_PCIE_CONF (0x000001) 54 #define XR3PCI_ATR_TRSLID_PCIE_IO (0x020000) 55 #define XR3PCI_ATR_TRSLID_PCIE_MEMORY (0x000000) 56 57 #define XR3PCI_ECAM_OFFSET(b, d, o) (((b) << 20) | \ 58 (PCI_SLOT(d) << 15) | \ 59 (PCI_FUNC(d) << 12) | o) 60 61 #define JUNO_RESET_CTRL 0x1004 62 #define JUNO_RESET_CTRL_PHY BIT(0) 63 #define JUNO_RESET_CTRL_RC BIT(1) 64 65 #define JUNO_RESET_STATUS 0x1008 66 #define JUNO_RESET_STATUS_PLL BIT(0) 67 #define JUNO_RESET_STATUS_PHY BIT(1) 68 #define JUNO_RESET_STATUS_RC BIT(2) 69 #define JUNO_RESET_STATUS_MASK (JUNO_RESET_STATUS_PLL | \ 70 JUNO_RESET_STATUS_PHY | \ 71 JUNO_RESET_STATUS_RC) 72 73 void xr3pci_set_atr_entry(unsigned long base, unsigned long src_addr, 74 unsigned long trsl_addr, int window_size, 75 int trsl_param) 76 { 77 /* X3PCI_ATR_SRC_ADDR_LOW: 78 - bit 0: enable entry, 79 - bits 1-6: ATR window size: total size in bytes: 2^(ATR_WSIZE + 1) 80 - bits 7-11: reserved 81 - bits 12-31: start of source address 82 */ 83 writel((u32)(src_addr & 0xfffff000) | (window_size - 1) << 1 | 1, 84 base + XR3PCI_ATR_SRC_ADDR_LOW); 85 writel((u32)(src_addr >> 32), base + XR3PCI_ATR_SRC_ADDR_HIGH); 86 writel((u32)(trsl_addr & 0xfffff000), base + XR3PCI_ATR_TRSL_ADDR_LOW); 87 writel((u32)(trsl_addr >> 32), base + XR3PCI_ATR_TRSL_ADDR_HIGH); 88 writel(trsl_param, base + XR3PCI_ATR_TRSL_PARAM); 89 90 debug("ATR entry: 0x%010lx %s 0x%010lx [0x%010llx] (param: 0x%06x)\n", 91 src_addr, (trsl_param & 0x400000) ? "<-" : "->", trsl_addr, 92 ((u64)1) << window_size, trsl_param); 93 } 94 95 void xr3pci_setup_atr(void) 96 { 97 /* setup PCIe to CPU address translation tables */ 98 unsigned long base = XR3_CONFIG_BASE + XR3PCI_ATR_PCIE_WIN0; 99 100 /* forward all writes from PCIe to GIC V2M (used for MSI) */ 101 xr3pci_set_atr_entry(base, JUNO_V2M_MSI_START, JUNO_V2M_MSI_START, 102 JUNO_V2M_MSI_SIZE, XR3PCI_ATR_TRSLID_AXIDEVICE); 103 104 base += XR3PCI_ATR_TABLE_SIZE; 105 106 /* PCIe devices can write anywhere in memory */ 107 xr3pci_set_atr_entry(base, PHYS_SDRAM_1, PHYS_SDRAM_1, 108 31 /* grant access to all RAM under 4GB */, 109 XR3PCI_ATR_TRSLID_AXIMEMORY); 110 base += XR3PCI_ATR_TABLE_SIZE; 111 xr3pci_set_atr_entry(base, PHYS_SDRAM_2, PHYS_SDRAM_2, 112 XR3_PCI_MEMSPACE64_SIZE, 113 XR3PCI_ATR_TRSLID_AXIMEMORY); 114 115 116 /* setup CPU to PCIe address translation table */ 117 base = XR3_CONFIG_BASE + XR3PCI_ATR_AXI4_SLV0; 118 119 /* setup ECAM space to bus configuration interface */ 120 xr3pci_set_atr_entry(base, XR3_PCI_ECAM_START, 0, XR3_PCI_ECAM_SIZE, 121 XR3PCI_ATR_TRSLID_PCIE_CONF); 122 123 base += XR3PCI_ATR_TABLE_SIZE; 124 125 /* setup IO space translation */ 126 xr3pci_set_atr_entry(base, XR3_PCI_IOSPACE_START, XR3_PCI_IOSPACE_START, 127 XR3_PCI_IOSPACE_SIZE, XR3PCI_ATR_TRSLID_PCIE_IO); 128 129 base += XR3PCI_ATR_TABLE_SIZE; 130 131 /* setup 32bit MEM space translation */ 132 xr3pci_set_atr_entry(base, XR3_PCI_MEMSPACE_START, XR3_PCI_MEMSPACE_START, 133 XR3_PCI_MEMSPACE_SIZE, XR3PCI_ATR_TRSLID_PCIE_MEMORY); 134 135 base += XR3PCI_ATR_TABLE_SIZE; 136 137 /* setup 64bit MEM space translation */ 138 xr3pci_set_atr_entry(base, XR3_PCI_MEMSPACE64_START, XR3_PCI_MEMSPACE64_START, 139 XR3_PCI_MEMSPACE64_SIZE, XR3PCI_ATR_TRSLID_PCIE_MEMORY); 140 } 141 142 void xr3pci_init(void) 143 { 144 u32 val; 145 int timeout = 200; 146 147 /* Initialise the XpressRICH3 PCIe host bridge */ 148 149 /* add credits */ 150 writel(0x00f0b818, XR3_CONFIG_BASE + XR3PCI_VIRTCHAN_CREDITS); 151 writel(0x1, XR3_CONFIG_BASE + XR3PCI_VIRTCHAN_CREDITS + 4); 152 /* allow ECRC */ 153 writel(0x6006, XR3_CONFIG_BASE + XR3PCI_PEX_SPC2); 154 /* setup the correct class code for the host bridge */ 155 writel(PCI_CLASS_BRIDGE_PCI << 16, XR3_CONFIG_BASE + XR3PCI_BRIDGE_PCI_IDS); 156 157 /* reset phy and root complex */ 158 writel(JUNO_RESET_CTRL_PHY | JUNO_RESET_CTRL_RC, 159 XR3_RESET_BASE + JUNO_RESET_CTRL); 160 161 do { 162 mdelay(1); 163 val = readl(XR3_RESET_BASE + JUNO_RESET_STATUS); 164 } while (--timeout && 165 (val & JUNO_RESET_STATUS_MASK) != JUNO_RESET_STATUS_MASK); 166 167 if (!timeout) { 168 printf("PCI XR3 Root complex reset timed out\n"); 169 return; 170 } 171 172 /* Wait for the link to train */ 173 mdelay(20); 174 timeout = 20; 175 176 do { 177 mdelay(1); 178 val = readl(XR3_CONFIG_BASE + XR3PCI_BASIC_STATUS); 179 } while (--timeout && !(val & XR3PCI_BS_LINK_MASK)); 180 181 if (!(val & XR3PCI_BS_LINK_MASK)) { 182 printf("Failed to negotiate a link!\n"); 183 return; 184 } 185 186 printf("PCIe XR3 Host Bridge enabled: x%d link (Gen %d)\n", 187 val & XR3PCI_BS_LINK_MASK, (val & XR3PCI_BS_GEN_MASK) >> 8); 188 189 xr3pci_setup_atr(); 190 } 191 192 void vexpress64_pcie_init(void) 193 { 194 xr3pci_init(); 195 } 196