1 /* 2 * Copyright (c) 2014 The Chromium OS Authors. 3 * 4 * Part of this file is adapted from coreboot 5 * src/arch/x86/include/arch/cpu.h and 6 * src/arch/x86/lib/cpu.c 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef _ASM_CPU_H 12 #define _ASM_CPU_H 13 14 enum { 15 X86_VENDOR_INVALID = 0, 16 X86_VENDOR_INTEL, 17 X86_VENDOR_CYRIX, 18 X86_VENDOR_AMD, 19 X86_VENDOR_UMC, 20 X86_VENDOR_NEXGEN, 21 X86_VENDOR_CENTAUR, 22 X86_VENDOR_RISE, 23 X86_VENDOR_TRANSMETA, 24 X86_VENDOR_NSC, 25 X86_VENDOR_SIS, 26 X86_VENDOR_ANY = 0xfe, 27 X86_VENDOR_UNKNOWN = 0xff 28 }; 29 30 /* Global descriptor table (GDT) bits */ 31 enum { 32 GDT_4KB = 1ULL << 55, 33 GDT_32BIT = 1ULL << 54, 34 GDT_LONG = 1ULL << 53, 35 GDT_PRESENT = 1ULL << 47, 36 GDT_NOTSYS = 1ULL << 44, 37 GDT_CODE = 1ULL << 43, 38 GDT_LIMIT_LOW_SHIFT = 0, 39 GDT_LIMIT_LOW_MASK = 0xffff, 40 GDT_LIMIT_HIGH_SHIFT = 48, 41 GDT_LIMIT_HIGH_MASK = 0xf, 42 GDT_BASE_LOW_SHIFT = 16, 43 GDT_BASE_LOW_MASK = 0xffff, 44 GDT_BASE_HIGH_SHIFT = 56, 45 GDT_BASE_HIGH_MASK = 0xf, 46 }; 47 48 /* 49 * System controllers in an x86 system. We mostly need to just find these and 50 * use them on PCI. At some point these might have their own uclass (e.g. 51 * UCLASS_VIDEO for the GMA device). 52 */ 53 enum { 54 X86_NONE, 55 X86_SYSCON_ME, /* Intel Management Engine */ 56 X86_SYSCON_GMA, /* Intel Graphics Media Accelerator */ 57 X86_SYSCON_PINCONF, /* Intel x86 pin configuration */ 58 }; 59 60 struct cpuid_result { 61 uint32_t eax; 62 uint32_t ebx; 63 uint32_t ecx; 64 uint32_t edx; 65 }; 66 67 /* 68 * Generic CPUID function 69 */ 70 static inline struct cpuid_result cpuid(int op) 71 { 72 struct cpuid_result result; 73 asm volatile( 74 "mov %%ebx, %%edi;" 75 "cpuid;" 76 "mov %%ebx, %%esi;" 77 "mov %%edi, %%ebx;" 78 : "=a" (result.eax), 79 "=S" (result.ebx), 80 "=c" (result.ecx), 81 "=d" (result.edx) 82 : "0" (op) 83 : "edi"); 84 return result; 85 } 86 87 /* 88 * Generic Extended CPUID function 89 */ 90 static inline struct cpuid_result cpuid_ext(int op, unsigned ecx) 91 { 92 struct cpuid_result result; 93 asm volatile( 94 "mov %%ebx, %%edi;" 95 "cpuid;" 96 "mov %%ebx, %%esi;" 97 "mov %%edi, %%ebx;" 98 : "=a" (result.eax), 99 "=S" (result.ebx), 100 "=c" (result.ecx), 101 "=d" (result.edx) 102 : "0" (op), "2" (ecx) 103 : "edi"); 104 return result; 105 } 106 107 /* 108 * CPUID functions returning a single datum 109 */ 110 static inline unsigned int cpuid_eax(unsigned int op) 111 { 112 unsigned int eax; 113 114 __asm__("mov %%ebx, %%edi;" 115 "cpuid;" 116 "mov %%edi, %%ebx;" 117 : "=a" (eax) 118 : "0" (op) 119 : "ecx", "edx", "edi"); 120 return eax; 121 } 122 123 static inline unsigned int cpuid_ebx(unsigned int op) 124 { 125 unsigned int eax, ebx; 126 127 __asm__("mov %%ebx, %%edi;" 128 "cpuid;" 129 "mov %%ebx, %%esi;" 130 "mov %%edi, %%ebx;" 131 : "=a" (eax), "=S" (ebx) 132 : "0" (op) 133 : "ecx", "edx", "edi"); 134 return ebx; 135 } 136 137 static inline unsigned int cpuid_ecx(unsigned int op) 138 { 139 unsigned int eax, ecx; 140 141 __asm__("mov %%ebx, %%edi;" 142 "cpuid;" 143 "mov %%edi, %%ebx;" 144 : "=a" (eax), "=c" (ecx) 145 : "0" (op) 146 : "edx", "edi"); 147 return ecx; 148 } 149 150 static inline unsigned int cpuid_edx(unsigned int op) 151 { 152 unsigned int eax, edx; 153 154 __asm__("mov %%ebx, %%edi;" 155 "cpuid;" 156 "mov %%edi, %%ebx;" 157 : "=a" (eax), "=d" (edx) 158 : "0" (op) 159 : "ecx", "edi"); 160 return edx; 161 } 162 163 /* Standard macro to see if a specific flag is changeable */ 164 static inline int flag_is_changeable_p(uint32_t flag) 165 { 166 uint32_t f1, f2; 167 168 asm( 169 "pushfl\n\t" 170 "pushfl\n\t" 171 "popl %0\n\t" 172 "movl %0,%1\n\t" 173 "xorl %2,%0\n\t" 174 "pushl %0\n\t" 175 "popfl\n\t" 176 "pushfl\n\t" 177 "popl %0\n\t" 178 "popfl\n\t" 179 : "=&r" (f1), "=&r" (f2) 180 : "ir" (flag)); 181 return ((f1^f2) & flag) != 0; 182 } 183 184 static inline void mfence(void) 185 { 186 __asm__ __volatile__("mfence" : : : "memory"); 187 } 188 189 /** 190 * cpu_enable_paging_pae() - Enable PAE-paging 191 * 192 * @cr3: Value to set in cr3 (PDPT or PML4T) 193 */ 194 void cpu_enable_paging_pae(ulong cr3); 195 196 /** 197 * cpu_disable_paging_pae() - Disable paging and PAE 198 */ 199 void cpu_disable_paging_pae(void); 200 201 /** 202 * cpu_has_64bit() - Check if the CPU has 64-bit support 203 * 204 * @return 1 if this CPU supports long mode (64-bit), 0 if not 205 */ 206 int cpu_has_64bit(void); 207 208 /** 209 * cpu_vendor_name() - Get CPU vendor name 210 * 211 * @vendor: CPU vendor enumeration number 212 * 213 * @return: Address to hold the CPU vendor name string 214 */ 215 const char *cpu_vendor_name(int vendor); 216 217 #define CPU_MAX_NAME_LEN 49 218 219 /** 220 * cpu_get_name() - Get the name of the current cpu 221 * 222 * @name: Place to put name, which must be CPU_MAX_NAME_LEN bytes including 223 * @return pointer to name, which will likely be a few bytes after the start 224 * of @name 225 * \0 terminator 226 */ 227 char *cpu_get_name(char *name); 228 229 /** 230 * cpu_call64() - Jump to a 64-bit Linux kernel (internal function) 231 * 232 * The kernel is uncompressed and the 64-bit entry point is expected to be 233 * at @target. 234 * 235 * This function is used internally - see cpu_jump_to_64bit() for a more 236 * useful function. 237 * 238 * @pgtable: Address of 24KB area containing the page table 239 * @setup_base: Pointer to the setup.bin information for the kernel 240 * @target: Pointer to the start of the kernel image 241 */ 242 void cpu_call64(ulong pgtable, ulong setup_base, ulong target); 243 244 /** 245 * cpu_call32() - Jump to a 32-bit entry point 246 * 247 * @code_seg32: 32-bit code segment to use (GDT offset, e.g. 0x20) 248 * @target: Pointer to the start of the 32-bit U-Boot image/entry point 249 * @table: Pointer to start of info table to pass to U-Boot 250 */ 251 void cpu_call32(ulong code_seg32, ulong target, ulong table); 252 253 /** 254 * cpu_jump_to_64bit() - Jump to a 64-bit Linux kernel 255 * 256 * The kernel is uncompressed and the 64-bit entry point is expected to be 257 * at @target. 258 * 259 * @setup_base: Pointer to the setup.bin information for the kernel 260 * @target: Pointer to the start of the kernel image 261 */ 262 int cpu_jump_to_64bit(ulong setup_base, ulong target); 263 264 /** 265 * cpu_get_family_model() - Get the family and model for the CPU 266 * 267 * @return the CPU ID masked with 0x0fff0ff0 268 */ 269 u32 cpu_get_family_model(void); 270 271 /** 272 * cpu_get_stepping() - Get the stepping value for the CPU 273 * 274 * @return the CPU ID masked with 0xf 275 */ 276 u32 cpu_get_stepping(void); 277 278 /** 279 * cpu_run_reference_code() - Run the platform reference code 280 * 281 * Some platforms require a binary blob to be executed once SDRAM is 282 * available. This is used to set up various platform features, such as the 283 * platform controller hub (PCH). This function should be implemented by the 284 * CPU-specific code. 285 * 286 * @return 0 on success, -ve on failure 287 */ 288 int cpu_run_reference_code(void); 289 290 #endif 291