xref: /openbmc/u-boot/arch/nds32/cpu/n1213/ag101/timer.c (revision 2482e3c8)
1 /*
2  * (C) Copyright 2009 Faraday Technology
3  * Po-Yu Chuang <ratbert@faraday-tech.com>
4  *
5  * Copyright (C) 2011 Andes Technology Corporation
6  * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
7  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
8  *
9  * See file CREDITS for list of people who contributed to this
10  * project.
11  *
12  * This program is free software; you can redistribute it and/or modify
13  * it under the terms of the GNU General Public License as published by
14  * the Free Software Foundation; either version 2 of the License, or
15  * (at your option) any later version.
16  *
17  * This program is distributed in the hope that it will be useful,
18  * but WITHOUT ANY WARRANTY; without even the implied warranty of
19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
20  * GNU General Public License for more details.
21  *
22  * You should have received a copy of the GNU General Public License
23  * along with this program; if not, write to the Free Software
24  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25  */
26 
27 #include <common.h>
28 #include <asm/io.h>
29 #include <faraday/fttmr010.h>
30 
31 static ulong timestamp;
32 static ulong lastdec;
33 
34 int timer_init(void)
35 {
36 	static struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
37 	unsigned int cr;
38 
39 	debug("%s()\n", __func__);
40 
41 	/* disable timers */
42 	writel(0, &tmr->cr);
43 
44 #ifdef CONFIG_FTTMR010_EXT_CLK
45 	/* use 32768Hz oscillator for RTC, WDT, TIMER */
46 	ftpmu010_32768osc_enable();
47 #endif
48 
49 	/* setup timer */
50 	writel(TIMER_LOAD_VAL, &tmr->timer3_load);
51 	writel(TIMER_LOAD_VAL, &tmr->timer3_counter);
52 	writel(0, &tmr->timer3_match1);
53 	writel(0, &tmr->timer3_match2);
54 
55 	/* we don't want timer to issue interrupts */
56 	writel(FTTMR010_TM3_MATCH1 |
57 	       FTTMR010_TM3_MATCH2 |
58 	       FTTMR010_TM3_OVERFLOW,
59 	       &tmr->interrupt_mask);
60 
61 	cr = readl(&tmr->cr);
62 #ifdef CONFIG_FTTMR010_EXT_CLK
63 	cr |= FTTMR010_TM3_CLOCK;	/* use external clock */
64 #endif
65 	cr |= FTTMR010_TM3_ENABLE;
66 	writel(cr, &tmr->cr);
67 
68 	/* init the timestamp and lastdec value */
69 	reset_timer_masked();
70 
71 	return 0;
72 }
73 
74 /*
75  * timer without interrupts
76  */
77 
78 /*
79  * reset time
80  */
81 void reset_timer_masked(void)
82 {
83 	static struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
84 
85 	/* capure current decrementer value time */
86 #ifdef CONFIG_FTTMR010_EXT_CLK
87 	lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
88 #else
89 	lastdec = readl(&tmr->timer3_counter) / (CONFIG_SYS_CLK_FREQ / 2);
90 #endif
91 	timestamp = 0;		/* start "advancing" time stamp from 0 */
92 
93 	debug("%s(): lastdec = %lx\n", __func__, lastdec);
94 }
95 
96 void reset_timer(void)
97 {
98 	debug("%s()\n", __func__);
99 	reset_timer_masked();
100 }
101 
102 /*
103  * return timer ticks
104  */
105 ulong get_timer_masked(void)
106 {
107 	static struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
108 
109 	/* current tick value */
110 #ifdef CONFIG_FTTMR010_EXT_CLK
111 	ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
112 #else
113 	ulong now = readl(&tmr->timer3_counter) / \
114 			(CONFIG_SYS_CLK_FREQ / 2 / 1024);
115 #endif
116 
117 	debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec);
118 
119 	if (lastdec >= now) {
120 		/*
121 		 * normal mode (non roll)
122 		 * move stamp fordward with absoulte diff ticks
123 		 */
124 		timestamp += lastdec - now;
125 	} else {
126 		/*
127 		 * we have overflow of the count down timer
128 		 *
129 		 * nts = ts + ld + (TLV - now)
130 		 * ts=old stamp, ld=time that passed before passing through -1
131 		 * (TLV-now) amount of time after passing though -1
132 		 * nts = new "advancing time stamp"...it could also roll and
133 		 * cause problems.
134 		 */
135 		timestamp += lastdec + TIMER_LOAD_VAL - now;
136 	}
137 
138 	lastdec = now;
139 
140 	debug("%s() returns %lx\n", __func__, timestamp);
141 
142 	return timestamp;
143 }
144 
145 /*
146  * return difference between timer ticks and base
147  */
148 ulong get_timer(ulong base)
149 {
150 	debug("%s(%lx)\n", __func__, base);
151 	return get_timer_masked() - base;
152 }
153 
154 void set_timer(ulong t)
155 {
156 	debug("%s(%lx)\n", __func__, t);
157 	timestamp = t;
158 }
159 
160 /* delay x useconds AND preserve advance timestamp value */
161 void __udelay(unsigned long usec)
162 {
163 	static struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
164 
165 #ifdef CONFIG_FTTMR010_EXT_CLK
166 	long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
167 #else
168 	long tmo = usec * ((CONFIG_SYS_CLK_FREQ / 2) / 1000) / 1000;
169 #endif
170 	unsigned long now, last = readl(&tmr->timer3_counter);
171 
172 	debug("%s(%lu)\n", __func__, usec);
173 	while (tmo > 0) {
174 		now = readl(&tmr->timer3_counter);
175 		if (now > last) /* count down timer overflow */
176 			tmo -= TIMER_LOAD_VAL + last - now;
177 		else
178 			tmo -= last - now;
179 		last = now;
180 	}
181 }
182 
183 /*
184  * This function is derived from PowerPC code (read timebase as long long).
185  * On ARM it just returns the timer value.
186  */
187 unsigned long long get_ticks(void)
188 {
189 	debug("%s()\n", __func__);
190 	return get_timer(0);
191 }
192 
193 /*
194  * This function is derived from PowerPC code (timebase clock frequency).
195  * On ARM it returns the number of timer ticks per second.
196  */
197 ulong get_tbclk(void)
198 {
199 	debug("%s()\n", __func__);
200 #ifdef CONFIG_FTTMR010_EXT_CLK
201 	return CONFIG_SYS_HZ;
202 #else
203 	return CONFIG_SYS_CLK_FREQ;
204 #endif
205 }
206