xref: /openbmc/u-boot/arch/nds32/cpu/n1213/ag101/timer.c (revision e8f80a5a)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2009 Faraday Technology
4  * Po-Yu Chuang <ratbert@faraday-tech.com>
5  *
6  * Copyright (C) 2011 Andes Technology Corporation
7  * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
8  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
9  */
10 #ifndef CONFIG_TIMER
11 #include <common.h>
12 #include <asm/io.h>
13 #include <faraday/fttmr010.h>
14 
15 static ulong timestamp;
16 static ulong lastdec;
17 
timer_init(void)18 int timer_init(void)
19 {
20 	struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
21 	unsigned int cr;
22 
23 	debug("%s()\n", __func__);
24 
25 	/* disable timers */
26 	writel(0, &tmr->cr);
27 
28 #ifdef CONFIG_FTTMR010_EXT_CLK
29 	/* use 32768Hz oscillator for RTC, WDT, TIMER */
30 	ftpmu010_32768osc_enable();
31 #endif
32 
33 	/* setup timer */
34 	writel(TIMER_LOAD_VAL, &tmr->timer3_load);
35 	writel(TIMER_LOAD_VAL, &tmr->timer3_counter);
36 	writel(0, &tmr->timer3_match1);
37 	writel(0, &tmr->timer3_match2);
38 
39 	/* we don't want timer to issue interrupts */
40 	writel(FTTMR010_TM3_MATCH1 |
41 	       FTTMR010_TM3_MATCH2 |
42 	       FTTMR010_TM3_OVERFLOW,
43 	       &tmr->interrupt_mask);
44 
45 	cr = readl(&tmr->cr);
46 #ifdef CONFIG_FTTMR010_EXT_CLK
47 	cr |= FTTMR010_TM3_CLOCK;	/* use external clock */
48 #endif
49 	cr |= FTTMR010_TM3_ENABLE;
50 	writel(cr, &tmr->cr);
51 
52 	/* init the timestamp and lastdec value */
53 	reset_timer_masked();
54 
55 	return 0;
56 }
57 
58 /*
59  * timer without interrupts
60  */
61 
62 /*
63  * reset time
64  */
reset_timer_masked(void)65 void reset_timer_masked(void)
66 {
67 	struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
68 
69 	/* capure current decrementer value time */
70 #ifdef CONFIG_FTTMR010_EXT_CLK
71 	lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
72 #else
73 	lastdec = readl(&tmr->timer3_counter) /
74 			(CONFIG_SYS_CLK_FREQ / 2 / CONFIG_SYS_HZ);
75 #endif
76 	timestamp = 0;		/* start "advancing" time stamp from 0 */
77 
78 	debug("%s(): lastdec = %lx\n", __func__, lastdec);
79 }
80 
reset_timer(void)81 void reset_timer(void)
82 {
83 	debug("%s()\n", __func__);
84 	reset_timer_masked();
85 }
86 
87 /*
88  * return timer ticks
89  */
get_timer_masked(void)90 ulong get_timer_masked(void)
91 {
92 	struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
93 
94 	/* current tick value */
95 #ifdef CONFIG_FTTMR010_EXT_CLK
96 	ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
97 #else
98 	ulong now = readl(&tmr->timer3_counter) /
99 			(CONFIG_SYS_CLK_FREQ / 2 / CONFIG_SYS_HZ);
100 #endif
101 
102 	debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec);
103 
104 	if (lastdec >= now) {
105 		/*
106 		 * normal mode (non roll)
107 		 * move stamp fordward with absoulte diff ticks
108 		 */
109 		timestamp += lastdec - now;
110 	} else {
111 		/*
112 		 * we have overflow of the count down timer
113 		 *
114 		 * nts = ts + ld + (TLV - now)
115 		 * ts=old stamp, ld=time that passed before passing through -1
116 		 * (TLV-now) amount of time after passing though -1
117 		 * nts = new "advancing time stamp"...it could also roll and
118 		 * cause problems.
119 		 */
120 		timestamp += lastdec + TIMER_LOAD_VAL - now;
121 	}
122 
123 	lastdec = now;
124 
125 	debug("%s() returns %lx\n", __func__, timestamp);
126 
127 	return timestamp;
128 }
129 
130 /*
131  * return difference between timer ticks and base
132  */
get_timer(ulong base)133 ulong get_timer(ulong base)
134 {
135 	debug("%s(%lx)\n", __func__, base);
136 	return get_timer_masked() - base;
137 }
138 
set_timer(ulong t)139 void set_timer(ulong t)
140 {
141 	debug("%s(%lx)\n", __func__, t);
142 	timestamp = t;
143 }
144 
145 /* delay x useconds AND preserve advance timestamp value */
__udelay(unsigned long usec)146 void __udelay(unsigned long usec)
147 {
148 	struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
149 
150 #ifdef CONFIG_FTTMR010_EXT_CLK
151 	long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
152 #else
153 	long tmo = usec * ((CONFIG_SYS_CLK_FREQ / 2) / 1000) / 1000;
154 #endif
155 	unsigned long now, last = readl(&tmr->timer3_counter);
156 
157 	debug("%s(%lu)\n", __func__, usec);
158 	while (tmo > 0) {
159 		now = readl(&tmr->timer3_counter);
160 		if (now > last) /* count down timer overflow */
161 			tmo -= TIMER_LOAD_VAL + last - now;
162 		else
163 			tmo -= last - now;
164 		last = now;
165 	}
166 }
167 
168 /*
169  * This function is derived from PowerPC code (read timebase as long long).
170  * On ARM it just returns the timer value.
171  */
get_ticks(void)172 unsigned long long get_ticks(void)
173 {
174 	debug("%s()\n", __func__);
175 	return get_timer(0);
176 }
177 
178 /*
179  * This function is derived from PowerPC code (timebase clock frequency).
180  * On ARM it returns the number of timer ticks per second.
181  */
get_tbclk(void)182 ulong get_tbclk(void)
183 {
184 	debug("%s()\n", __func__);
185 #ifdef CONFIG_FTTMR010_EXT_CLK
186 	return CONFIG_SYS_HZ;
187 #else
188 	return CONFIG_SYS_CLK_FREQ;
189 #endif
190 }
191 #endif /* CONFIG_TIMER */
192