1/*
2 * Support for CompuLab CL-SOM-AM57x System-on-Module
3 *
4 * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
5 * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License version 2 as published by
9 * the Free Software Foundation.
10 */
11
12/dts-v1/;
13
14#include <dt-bindings/gpio/gpio.h>
15#include <dt-bindings/interrupt-controller/irq.h>
16#include "dra74x.dtsi"
17
18/ {
19	model = "CompuLab CL-SOM-AM57x";
20	compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
21
22	memory@0 {
23		device_type = "memory";
24		reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */
25	};
26
27	leds {
28		compatible = "gpio-leds";
29		pinctrl-names = "default";
30		pinctrl-0 = <&leds_pins_default>;
31
32		led0 {
33			label = "cl-som-am57x:green";
34			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
35			linux,default-trigger = "heartbeat";
36			default-state = "off";
37		};
38	};
39
40	vdd_3v3: fixedregulator-vdd_3v3 {
41		compatible = "regulator-fixed";
42		regulator-name = "vdd_3v3";
43		regulator-min-microvolt = <3300000>;
44		regulator-max-microvolt = <3300000>;
45	};
46
47	ads7846reg: fixedregulator-ads7846-reg {
48		compatible = "regulator-fixed";
49		regulator-name = "ads7846-reg";
50		regulator-min-microvolt = <3300000>;
51		regulator-max-microvolt = <3300000>;
52	};
53
54	sound0: sound0 {
55		compatible = "simple-audio-card";
56		simple-audio-card,name = "CL-SOM-AM57x-Sound-Card";
57		simple-audio-card,format = "i2s";
58		simple-audio-card,bitclock-master = <&dailink0_master>;
59		simple-audio-card,frame-master = <&dailink0_master>;
60		simple-audio-card,widgets =
61					"Headphone", "Headphone Jack",
62					"Microphone", "Microphone Jack",
63					"Line", "Line Jack";
64		simple-audio-card,routing =
65					"Headphone Jack", "RHPOUT",
66					"Headphone Jack", "LHPOUT",
67					"LLINEIN", "Line Jack",
68					"MICIN", "Mic Bias",
69					"Mic Bias", "Microphone Jack";
70
71		dailink0_master: simple-audio-card,cpu {
72			sound-dai = <&mcasp3>;
73		};
74
75		simple-audio-card,codec {
76			sound-dai = <&wm8731>;
77			system-clock-frequency = <12000000>;
78		};
79	};
80};
81
82&dra7_pmx_core {
83	leds_pins_default: leds_pins_default {
84		pinctrl-single,pins = <
85			DRA7XX_CORE_IOPAD(0x347c, PIN_OUTPUT | MUX_MODE14)	/* gpmc_a15.gpio2_5 */
86		>;
87	};
88
89	i2c1_pins_default: i2c1_pins_default {
90		pinctrl-single,pins = <
91			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda.sda */
92			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl.scl */
93		>;
94	};
95
96	i2c3_pins_default: i2c3_pins_default {
97		pinctrl-single,pins = <
98			DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10)	/* mcasp1_aclkx.i2c3_sda */
99			DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsx.i2c3_scl */
100		>;
101	};
102
103	i2c4_pins_default: i2c4_pins_default {
104		pinctrl-single,pins = <
105			DRA7XX_CORE_IOPAD(0x36ac, PIN_INPUT| MUX_MODE10)	/* mcasp1_acl.i2c4_sda */
106			DRA7XX_CORE_IOPAD(0x36b0, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsr.i2c4_scl */
107		>;
108	};
109
110	tps659038_pins_default: tps659038_pins_default {
111		pinctrl-single,pins = <
112			DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
113		>;
114	};
115
116	mmc2_pins_default: mmc2_pins_default {
117		pinctrl-single,pins = <
118			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
119			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
120			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
121			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
122			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
123			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
124			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
125			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
126			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
127			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
128		>;
129	};
130
131	qspi1_pins: pinmux_qspi1_pins {
132		pinctrl-single,pins = <
133			DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1)	/* gpmc_a13.qspi1_rtclk */
134			DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1)	/* gpmc_a16.qspi1_d0 */
135			DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1)	/* gpmc_a17.qspi1_d1 */
136			DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1)	/* qpmc_a18.qspi1_sclk */
137			DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_cs2.qspi1_cs0 */
138			DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_cs3.qspi1_cs1 */
139		>;
140	};
141
142	cpsw_pins_default: cpsw_pins_default {
143		pinctrl-single,pins = <
144			/* Slave at addr 0x0 */
145			DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_tclk */
146			DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_tctl */
147			DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td3 */
148			DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td2 */
149			DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td1 */
150			DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td0 */
151			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rclk */
152			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rctl */
153			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd3 */
154			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd2 */
155			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd1 */
156			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd0 */
157
158			/* Slave at addr 0x1 */
159			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_tclk */
160			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
161			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
162			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
163			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
164			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
165			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
166			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
167			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
168			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
169			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
170			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
171		>;
172	};
173
174	cpsw_pins_sleep: cpsw_pins_sleep {
175		pinctrl-single,pins = <
176			/* Slave 1 */
177			DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
178			DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
179			DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
180			DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
181			DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
182			DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
183			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
184			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
185			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
186			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
187			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
188			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
189
190			/* Slave 2 */
191			DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
192			DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
193			DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
194			DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
195			DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
196			DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
197			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
198			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
199			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
200			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
201			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
202			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
203		>;
204	};
205
206	davinci_mdio_pins_default: davinci_mdio_pins_default {
207		pinctrl-single,pins = <
208			/* MDIO */
209			DRA7XX_CORE_IOPAD(0x3590, PIN_OUTPUT_PULLUP | MUX_MODE3)/* vin2a_d10.mdio_mclk */
210			DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT_PULLUP | MUX_MODE3)	/* vin2a_d11.mdio_d */
211		>;
212	};
213
214	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
215		pinctrl-single,pins = <
216			DRA7XX_CORE_IOPAD(0x3590, PIN_INPUT | MUX_MODE15)
217			DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT | MUX_MODE15)
218		>;
219	};
220
221	ads7846_pins: pinmux_ads7846_pins {
222		pinctrl-single,pins = <
223			DRA7XX_CORE_IOPAD(0x3464, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpmc_a9.gpio1_31 */
224		>;
225	};
226
227	mcasp3_pins_default: mcasp3_pins_default {
228		pinctrl-single,pins = <
229			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
230			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
231			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
232			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
233		>;
234	};
235
236	mcasp3_pins_sleep: mcasp3_pins_sleep {
237		pinctrl-single,pins = <
238			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
239			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
240			DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
241			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
242		>;
243	};
244};
245
246&i2c1 {
247	status = "okay";
248	pinctrl-names = "default";
249	pinctrl-0 = <&i2c1_pins_default>;
250	clock-frequency = <400000>;
251};
252
253&i2c3 {
254	status = "okay";
255	pinctrl-names = "default";
256	pinctrl-0 = <&i2c3_pins_default>;
257	clock-frequency = <400000>;
258};
259
260&i2c4 {
261	status = "okay";
262	pinctrl-names = "default";
263	pinctrl-0 = <&i2c4_pins_default>;
264	clock-frequency = <400000>;
265
266	tps659038: tps659038@58 {
267		compatible = "ti,tps659038";
268		reg = <0x58>;
269		interrupt-parent = <&gpio1>;
270		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
271
272		pinctrl-names = "default";
273		pinctrl-0 = <&tps659038_pins_default>;
274
275		#interrupt-cells = <2>;
276		interrupt-controller;
277
278		ti,system-power-controller;
279
280		tps659038_pmic {
281			compatible = "ti,tps659038-pmic";
282
283			regulators {
284				smps12_reg: smps12 {
285					/* VDD_MPU */
286					regulator-name = "smps12";
287					regulator-min-microvolt = < 850000>;
288					regulator-max-microvolt = <1250000>;
289					regulator-always-on;
290					regulator-boot-on;
291				};
292
293				smps3_reg: smps3 {
294					/* VDD_DDR */
295					regulator-name = "smps3";
296					regulator-min-microvolt = <1500000>;
297					regulator-max-microvolt = <1500000>;
298					regulator-always-on;
299					regulator-boot-on;
300				};
301
302				smps45_reg: smps45 {
303					/* VDD_DSPEVE */
304					regulator-name = "smps45";
305					regulator-min-microvolt = < 850000>;
306					regulator-max-microvolt = <1250000>;
307					regulator-always-on;
308					regulator-boot-on;
309				};
310
311				smps6_reg: smps6 {
312					/* VDD_GPU */
313					regulator-name = "smps6";
314					regulator-min-microvolt = < 850000>;
315					regulator-max-microvolt = <1250000>;
316					regulator-always-on;
317					regulator-boot-on;
318				};
319
320				smps7_reg: smps7 {
321					/* VDD_CORE */
322					regulator-name = "smps7";
323					regulator-min-microvolt = < 850000>;
324					regulator-max-microvolt = <1160000>;
325					regulator-always-on;
326					regulator-boot-on;
327				};
328
329				smps8_reg: smps8 {
330					/* VDD_IVA */
331					regulator-name = "smps8";
332					regulator-min-microvolt = < 850000>;
333					regulator-max-microvolt = <1250000>;
334					regulator-always-on;
335					regulator-boot-on;
336				};
337
338				smps9_reg: smps9 {
339					/* PMIC_3V3 */
340					regulator-name = "smps9";
341					regulator-min-microvolt = <3300000>;
342					regulator-max-microvolt = <3300000>;
343					regulator-always-on;
344					regulator-boot-on;
345				};
346
347
348				ldo1_reg: ldo1 {
349					/* VDD_SD / VDDSHV8  */
350					regulator-name = "ldo1";
351					regulator-min-microvolt = <1800000>;
352					regulator-max-microvolt = <3300000>;
353					regulator-boot-on;
354					regulator-always-on;
355				};
356
357				ldo2_reg: ldo2 {
358					/* VDD_1V8 */
359					regulator-name = "ldo2";
360					regulator-min-microvolt = <1800000>;
361					regulator-max-microvolt = <1800000>;
362					regulator-always-on;
363					regulator-boot-on;
364				};
365
366				ldo3_reg: ldo3 {
367					/* VDDA_1V8_PHYA - supplies VDDA_SATA, VDDA_USB1/2/3 */
368					regulator-name = "ldo3";
369					regulator-min-microvolt = <1800000>;
370					regulator-max-microvolt = <1800000>;
371					regulator-always-on;
372					regulator-boot-on;
373				};
374
375				ldo4_reg: ldo4 {
376					/* VDDA_1V8_PHYB - supplies VDDA_HDMI, VDDA_PCIE/0/1 */
377					regulator-name = "ldo4";
378					regulator-min-microvolt = <1800000>;
379					regulator-max-microvolt = <1800000>;
380					regulator-always-on;
381					regulator-boot-on;
382				};
383
384				ldo9_reg: ldo9 {
385					/* VDD_RTC */
386					regulator-name = "ldo9";
387					regulator-min-microvolt = <1050000>;
388					regulator-max-microvolt = <1050000>;
389					regulator-always-on;
390					regulator-boot-on;
391				};
392
393				ldoln_reg: ldoln {
394					/* VDDA_1V8_PLL */
395					regulator-name = "ldoln";
396					regulator-min-microvolt = <1800000>;
397					regulator-max-microvolt = <1800000>;
398					regulator-always-on;
399					regulator-boot-on;
400				};
401
402				ldousb_reg: ldousb {
403					/* VDDA_3V_USB: VDDA_USBHS33 */
404					regulator-name = "ldousb";
405					regulator-min-microvolt = <3300000>;
406					regulator-max-microvolt = <3300000>;
407					regulator-always-on;
408					regulator-boot-on;
409				};
410
411				/* regen1 not used */
412			};
413		};
414
415		tps659038_pwr_button: tps659038_pwr_button {
416			compatible = "ti,palmas-pwrbutton";
417			interrupt-parent = <&tps659038>;
418			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
419			wakeup-source;
420			ti,palmas-long-press-seconds = <12>;
421		};
422
423		tps659038_gpio: tps659038_gpio {
424			compatible = "ti,palmas-gpio";
425			gpio-controller;
426			#gpio-cells = <2>;
427		};
428	};
429
430	rtc0: rtc@56 {
431		compatible = "emmicro,em3027";
432		reg = <0x56>;
433	};
434
435	eeprom_module: atmel@50 {
436		compatible = "atmel,24c08";
437		reg = <0x50>;
438		pagesize = <16>;
439	};
440
441	wm8731: wm8731@1a {
442		#sound-dai-cells = <0>;
443		compatible = "wlf,wm8731";
444		reg = <0x1a>;
445		status = "okay";
446	};
447};
448
449&cpu0 {
450	cpu0-supply = <&smps12_reg>;
451	voltage-tolerance = <1>;
452};
453
454&sata {
455	status = "okay";
456};
457
458&mailbox5 {
459	status = "okay";
460	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
461		status = "okay";
462	};
463	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
464		status = "okay";
465	};
466};
467
468&mailbox6 {
469	status = "okay";
470	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
471		status = "okay";
472	};
473	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
474		status = "okay";
475	};
476};
477
478&mmc2 {
479	status = "okay";
480
481	pinctrl-names = "default";
482	pinctrl-0 = <&mmc2_pins_default>;
483
484	vmmc-supply = <&vdd_3v3>;
485	bus-width = <8>;
486	ti,non-removable;
487	cap-mmc-dual-data-rate;
488};
489
490&qspi {
491	status = "okay";
492	pinctrl-names = "default";
493	pinctrl-0 = <&qspi1_pins>;
494
495	spi-max-frequency = <48000000>;
496
497	spi_flash: spi_flash@0 {
498		#address-cells = <1>;
499		#size-cells = <1>;
500		compatible = "spansion,m25p80", "jedec,spi-nor";
501		reg = <0>;				/* CS0 */
502		spi-max-frequency = <48000000>;
503
504		partition@0 {
505			label = "uboot";
506			reg = <0x0 0xc0000>;
507		};
508
509		partition@c0000 {
510			label = "uboot environment";
511			reg = <0xc0000 0x40000>;
512		};
513
514		partition@100000 {
515			label = "reserved";
516			reg = <0x100000 0x0>;
517		};
518	};
519
520	/* touch controller */
521	ads7846@0 {
522		pinctrl-names = "default";
523		pinctrl-0 = <&ads7846_pins>;
524
525		compatible = "ti,ads7846";
526		vcc-supply = <&ads7846reg>;
527
528		reg = <1>;                              /* CS1 */
529		spi-max-frequency = <1500000>;
530
531		interrupt-parent = <&gpio1>;
532		interrupts = <31 0>;
533		pendown-gpio = <&gpio1 31 0>;
534
535
536		ti,x-min = /bits/ 16 <0x0>;
537		ti,x-max = /bits/ 16 <0x0fff>;
538		ti,y-min = /bits/ 16 <0x0>;
539		ti,y-max = /bits/ 16 <0x0fff>;
540
541		ti,x-plate-ohms = /bits/ 16 <180>;
542		ti,pressure-max = /bits/ 16 <255>;
543
544		ti,debounce-max = /bits/ 16 <30>;
545		ti,debounce-tol = /bits/ 16 <10>;
546		ti,debounce-rep = /bits/ 16 <1>;
547
548		wakeup-source;
549	};
550};
551
552&mac {
553	status = "okay";
554	pinctrl-names = "default", "sleep";
555	pinctrl-0 = <&cpsw_pins_default>;
556	pinctrl-1 = <&cpsw_pins_sleep>;
557	dual_emac;
558};
559
560&cpsw_emac0 {
561	phy_id = <&davinci_mdio>, <0>;
562	phy-mode = "rgmii-txid";
563	dual_emac_res_vlan = <0>;
564};
565
566&cpsw_emac1 {
567	phy_id = <&davinci_mdio>, <1>;
568	phy-mode = "rgmii-txid";
569	dual_emac_res_vlan = <1>;
570};
571
572&davinci_mdio {
573	pinctrl-names = "default", "sleep";
574	pinctrl-0 = <&davinci_mdio_pins_default>;
575	pinctrl-1 = <&davinci_mdio_pins_sleep>;
576};
577
578&usb2_phy1 {
579	phy-supply = <&ldousb_reg>;
580};
581
582&usb2_phy2 {
583	phy-supply = <&ldousb_reg>;
584};
585
586&usb1 {
587	dr_mode = "host";
588};
589
590&usb2 {
591	dr_mode = "host";
592};
593
594&mcasp3 {
595	#sound-dai-cells = <0>;
596	pinctrl-names = "default", "sleep";
597	pinctrl-0 = <&mcasp3_pins_default>;
598	pinctrl-1 = <&mcasp3_pins_sleep>;
599	status = "okay";
600
601	op-mode = <0>;	/* MCASP_IIS_MODE */
602	tdm-slots = <2>;
603	/* 4 serializers */
604	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
605		1 2 0 0
606	>;
607};
608
609&gpio3 {
610	status = "okay";
611	ti,no-reset-on-init;
612};
613
614&gpio2 {
615	status = "okay";
616	ti,no-reset-on-init;
617};
618