xref: /openbmc/u-boot/arch/arm/cpu/armv7/ls102xa/Kconfig (revision 0f347a00)
1config ARCH_LS1021A
2	bool
3	select SYS_FSL_DDR_BE if SYS_FSL_DDR
4	select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR
5	select SYS_FSL_ERRATUM_A008378
6	select SYS_FSL_ERRATUM_A008407
7	select SYS_FSL_ERRATUM_A008997
8	select SYS_FSL_ERRATUM_A009007
9	select SYS_FSL_ERRATUM_A009008
10	select SYS_FSL_ERRATUM_A009663
11	select SYS_FSL_ERRATUM_A009798
12	select SYS_FSL_ERRATUM_A009942
13	select SYS_FSL_ERRATUM_A010315
14	select SYS_FSL_HAS_CCI400
15	select SYS_FSL_HAS_DDR3 if SYS_FSL_DDR
16	select SYS_FSL_HAS_DDR4 if SYS_FSL_DDR
17	select SYS_FSL_HAS_SEC
18	select SYS_FSL_SEC_COMPAT_5
19	select SYS_FSL_SEC_LE
20	select SYS_FSL_SRDS_1
21	select SYS_HAS_SERDES
22	imply CMD_PCI
23	imply SCSI
24	imply SCSI_AHCI
25
26menu "LS102xA architecture"
27	depends on ARCH_LS1021A
28
29config FSL_PCIE_COMPAT
30	string "PCIe compatible of Kernel DT"
31	depends on PCIE_LAYERSCAPE
32	default "fsl,ls1021a-pcie" if ARCH_LS1021A
33	help
34	  This compatible is used to find pci controller node in Kernel DT
35	  to complete fixup.
36
37config LS1_DEEP_SLEEP
38	bool "Deep sleep"
39	depends on ARCH_LS1021A
40
41config MAX_CPUS
42	int "Maximum number of CPUs permitted for LS102xA"
43	depends on ARCH_LS1021A
44	default 2
45	help
46	  Set this number to the maximum number of possible CPUs in the SoC.
47	  SoCs may have multiple clusters with each cluster may have multiple
48	  ports. If some ports are reserved but higher ports are used for
49	  cores, count the reserved ports. This will allocate enough memory
50	  in spin table to properly handle all cores.
51
52config SECURE_BOOT
53	bool	"Secure Boot"
54	help
55		Enable Freescale Secure Boot feature. Normally selected
56		by defconfig. If unsure, do not change.
57
58config SYS_CCI400_OFFSET
59	hex "Offset for CCI400 base"
60	depends on SYS_FSL_HAS_CCI400
61	default 0x180000
62	help
63	  Offset for CCI400 base.
64	  CCI400 base addr = CCSRBAR + CCI400_OFFSET
65
66config SYS_FSL_ERRATUM_A008997
67	bool
68	help
69	  Workaround for USB PHY erratum A008997
70
71config SYS_FSL_ERRATUM_A009007
72	bool
73	help
74	  Workaround for USB PHY erratum A009007
75
76config SYS_FSL_ERRATUM_A009008
77	bool
78	help
79	  Workaround for USB PHY erratum A009008
80
81config SYS_FSL_ERRATUM_A009798
82	bool
83	help
84	  Workaround for USB PHY erratum A009798
85
86config SYS_FSL_ERRATUM_A010315
87	bool "Workaround for PCIe erratum A010315"
88
89config SYS_FSL_HAS_CCI400
90	bool
91
92config SYS_FSL_SRDS_1
93	bool
94
95config SYS_FSL_SRDS_2
96	bool
97
98config SYS_HAS_SERDES
99	bool
100
101config SYS_FSL_IFC_BANK_COUNT
102	int "Maximum banks of Integrated flash controller"
103	depends on ARCH_LS1021A
104	default 8
105
106config SYS_FSL_ERRATUM_A008407
107	bool
108
109endmenu
110