1c609719bSwdenk# 2b75190deSWolfgang Denk# (C) Copyright 2000 - 2012 3c609719bSwdenk# Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4c609719bSwdenk# 5c609719bSwdenk# See file CREDITS for list of people who contributed to this 6c609719bSwdenk# project. 7c609719bSwdenk# 8c609719bSwdenk# This program is free software; you can redistribute it and/or 9c609719bSwdenk# modify it under the terms of the GNU General Public License as 10c609719bSwdenk# published by the Free Software Foundation; either version 2 of 11c609719bSwdenk# the License, or (at your option) any later version. 12c609719bSwdenk# 13c609719bSwdenk# This program is distributed in the hope that it will be useful, 14c609719bSwdenk# but WITHOUT ANY WARRANTY; without even the implied warranty of 15c609719bSwdenk# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16c609719bSwdenk# GNU General Public License for more details. 17c609719bSwdenk# 18c609719bSwdenk# You should have received a copy of the GNU General Public License 19c609719bSwdenk# along with this program; if not, write to the Free Software 20c609719bSwdenk# Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21c609719bSwdenk# MA 02111-1307 USA 22c609719bSwdenk# 23c609719bSwdenk 24c609719bSwdenkSummary: 25c609719bSwdenk======== 26c609719bSwdenk 2724ee89b9SwdenkThis directory contains the source code for U-Boot, a boot loader for 28e86e5a07SwdenkEmbedded boards based on PowerPC, ARM, MIPS and several other 29e86e5a07Swdenkprocessors, which can be installed in a boot ROM and used to 30e86e5a07Swdenkinitialize and test the hardware or to download and run application 31e86e5a07Swdenkcode. 32c609719bSwdenk 33c609719bSwdenkThe development of U-Boot is closely related to Linux: some parts of 3424ee89b9Swdenkthe source code originate in the Linux source tree, we have some 3524ee89b9Swdenkheader files in common, and special provision has been made to 36c609719bSwdenksupport booting of Linux images. 37c609719bSwdenk 38c609719bSwdenkSome attention has been paid to make this software easily 39c609719bSwdenkconfigurable and extendable. For instance, all monitor commands are 40c609719bSwdenkimplemented with the same call interface, so that it's very easy to 41c609719bSwdenkadd new commands. Also, instead of permanently adding rarely used 42c609719bSwdenkcode (for instance hardware test utilities) to the monitor, you can 43c609719bSwdenkload and run it dynamically. 44c609719bSwdenk 45c609719bSwdenk 46c609719bSwdenkStatus: 47c609719bSwdenk======= 48c609719bSwdenk 49c609719bSwdenkIn general, all boards for which a configuration option exists in the 50c609719bSwdenkMakefile have been tested to some extent and can be considered 51c609719bSwdenk"working". In fact, many of them are used in production systems. 52c609719bSwdenk 53c609719bSwdenkIn case of problems see the CHANGELOG and CREDITS files to find out 54218ca724SWolfgang Denkwho contributed the specific port. The MAINTAINERS file lists board 55218ca724SWolfgang Denkmaintainers. 56c609719bSwdenk 57adb9d851SRobert P. J. DayNote: There is no CHANGELOG file in the actual U-Boot source tree; 58adb9d851SRobert P. J. Dayit can be created dynamically from the Git log using: 59adb9d851SRobert P. J. Day 60adb9d851SRobert P. J. Day make CHANGELOG 61adb9d851SRobert P. J. Day 62c609719bSwdenk 63c609719bSwdenkWhere to get help: 64c609719bSwdenk================== 65c609719bSwdenk 66c609719bSwdenkIn case you have questions about, problems with or contributions for 67c609719bSwdenkU-Boot you should send a message to the U-Boot mailing list at 680c32565fSPeter Tyser<u-boot@lists.denx.de>. There is also an archive of previous traffic 690c32565fSPeter Tyseron the mailing list - please search the archive before asking FAQ's. 700c32565fSPeter TyserPlease see http://lists.denx.de/pipermail/u-boot and 710c32565fSPeter Tyserhttp://dir.gmane.org/gmane.comp.boot-loaders.u-boot 72c609719bSwdenk 73c609719bSwdenk 74218ca724SWolfgang DenkWhere to get source code: 75218ca724SWolfgang Denk========================= 76218ca724SWolfgang Denk 77218ca724SWolfgang DenkThe U-Boot source code is maintained in the git repository at 78218ca724SWolfgang Denkgit://www.denx.de/git/u-boot.git ; you can browse it online at 79218ca724SWolfgang Denkhttp://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=summary 80218ca724SWolfgang Denk 81218ca724SWolfgang DenkThe "snapshot" links on this page allow you to download tarballs of 8211ccc33fSMarcel Ziswilerany version you might be interested in. Official releases are also 83218ca724SWolfgang Denkavailable for FTP download from the ftp://ftp.denx.de/pub/u-boot/ 84218ca724SWolfgang Denkdirectory. 85218ca724SWolfgang Denk 86d4ee711dSAnatolij GustschinPre-built (and tested) images are available from 87218ca724SWolfgang Denkftp://ftp.denx.de/pub/u-boot/images/ 88218ca724SWolfgang Denk 89218ca724SWolfgang Denk 90c609719bSwdenkWhere we come from: 91c609719bSwdenk=================== 92c609719bSwdenk 93c609719bSwdenk- start from 8xxrom sources 9424ee89b9Swdenk- create PPCBoot project (http://sourceforge.net/projects/ppcboot) 95c609719bSwdenk- clean up code 96c609719bSwdenk- make it easier to add custom boards 97c609719bSwdenk- make it possible to add other [PowerPC] CPUs 98c609719bSwdenk- extend functions, especially: 99c609719bSwdenk * Provide extended interface to Linux boot loader 100c609719bSwdenk * S-Record download 101c609719bSwdenk * network boot 10211ccc33fSMarcel Ziswiler * PCMCIA / CompactFlash / ATA disk / SCSI ... boot 10324ee89b9Swdenk- create ARMBoot project (http://sourceforge.net/projects/armboot) 104c609719bSwdenk- add other CPU families (starting with ARM) 10524ee89b9Swdenk- create U-Boot project (http://sourceforge.net/projects/u-boot) 1060d28f34bSMagnus Lilja- current project page: see http://www.denx.de/wiki/U-Boot 10724ee89b9Swdenk 10824ee89b9Swdenk 10924ee89b9SwdenkNames and Spelling: 11024ee89b9Swdenk=================== 11124ee89b9Swdenk 11224ee89b9SwdenkThe "official" name of this project is "Das U-Boot". The spelling 11324ee89b9Swdenk"U-Boot" shall be used in all written text (documentation, comments 11424ee89b9Swdenkin source files etc.). Example: 11524ee89b9Swdenk 11624ee89b9Swdenk This is the README file for the U-Boot project. 11724ee89b9Swdenk 11824ee89b9SwdenkFile names etc. shall be based on the string "u-boot". Examples: 11924ee89b9Swdenk 12024ee89b9Swdenk include/asm-ppc/u-boot.h 12124ee89b9Swdenk 12224ee89b9Swdenk #include <asm/u-boot.h> 12324ee89b9Swdenk 12424ee89b9SwdenkVariable names, preprocessor constants etc. shall be either based on 12524ee89b9Swdenkthe string "u_boot" or on "U_BOOT". Example: 12624ee89b9Swdenk 12724ee89b9Swdenk U_BOOT_VERSION u_boot_logo 12824ee89b9Swdenk IH_OS_U_BOOT u_boot_hush_start 129c609719bSwdenk 130c609719bSwdenk 13193f19cc0SwdenkVersioning: 13293f19cc0Swdenk=========== 13393f19cc0Swdenk 134360d883aSThomas WeberStarting with the release in October 2008, the names of the releases 135360d883aSThomas Weberwere changed from numerical release numbers without deeper meaning 136360d883aSThomas Weberinto a time stamp based numbering. Regular releases are identified by 137360d883aSThomas Webernames consisting of the calendar year and month of the release date. 138360d883aSThomas WeberAdditional fields (if present) indicate release candidates or bug fix 139360d883aSThomas Weberreleases in "stable" maintenance trees. 14093f19cc0Swdenk 141360d883aSThomas WeberExamples: 142360d883aSThomas Weber U-Boot v2009.11 - Release November 2009 143360d883aSThomas Weber U-Boot v2009.11.1 - Release 1 in version November 2009 stable tree 144360d883aSThomas Weber U-Boot v2010.09-rc1 - Release candiate 1 for September 2010 release 14593f19cc0Swdenk 14693f19cc0Swdenk 147c609719bSwdenkDirectory Hierarchy: 148c609719bSwdenk==================== 149c609719bSwdenk 1508d321b81SPeter Tyser/arch Architecture specific files 1518d321b81SPeter Tyser /arm Files generic to ARM architecture 1528d321b81SPeter Tyser /cpu CPU specific files 1538d321b81SPeter Tyser /arm720t Files specific to ARM 720 CPUs 1548d321b81SPeter Tyser /arm920t Files specific to ARM 920 CPUs 1556eb0921aSAndreas Bießmann /at91 Files specific to Atmel AT91RM9200 CPU 1568d321b81SPeter Tyser /imx Files specific to Freescale MC9328 i.MX CPUs 1578d321b81SPeter Tyser /s3c24x0 Files specific to Samsung S3C24X0 CPUs 1588d321b81SPeter Tyser /arm925t Files specific to ARM 925 CPUs 1598d321b81SPeter Tyser /arm926ejs Files specific to ARM 926 CPUs 1608d321b81SPeter Tyser /arm1136 Files specific to ARM 1136 CPUs 1618d321b81SPeter Tyser /ixp Files specific to Intel XScale IXP CPUs 1628d321b81SPeter Tyser /pxa Files specific to Intel XScale PXA CPUs 1638d321b81SPeter Tyser /s3c44b0 Files specific to Samsung S3C44B0 CPUs 1648d321b81SPeter Tyser /sa1100 Files specific to Intel StrongARM SA1100 CPUs 1658d321b81SPeter Tyser /lib Architecture specific library files 1668d321b81SPeter Tyser /avr32 Files generic to AVR32 architecture 1678d321b81SPeter Tyser /cpu CPU specific files 1688d321b81SPeter Tyser /lib Architecture specific library files 1698d321b81SPeter Tyser /blackfin Files generic to Analog Devices Blackfin architecture 1708d321b81SPeter Tyser /cpu CPU specific files 1718d321b81SPeter Tyser /lib Architecture specific library files 172fea25720SGraeme Russ /x86 Files generic to x86 architecture 1738d321b81SPeter Tyser /cpu CPU specific files 1748d321b81SPeter Tyser /lib Architecture specific library files 1758d321b81SPeter Tyser /m68k Files generic to m68k architecture 1768d321b81SPeter Tyser /cpu CPU specific files 1778d321b81SPeter Tyser /mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs 1788d321b81SPeter Tyser /mcf5227x Files specific to Freescale ColdFire MCF5227x CPUs 1798d321b81SPeter Tyser /mcf532x Files specific to Freescale ColdFire MCF5329 CPUs 1808d321b81SPeter Tyser /mcf5445x Files specific to Freescale ColdFire MCF5445x CPUs 1818d321b81SPeter Tyser /mcf547x_8x Files specific to Freescale ColdFire MCF547x_8x CPUs 1828d321b81SPeter Tyser /lib Architecture specific library files 1838d321b81SPeter Tyser /microblaze Files generic to microblaze architecture 1848d321b81SPeter Tyser /cpu CPU specific files 1858d321b81SPeter Tyser /lib Architecture specific library files 1868d321b81SPeter Tyser /mips Files generic to MIPS architecture 1878d321b81SPeter Tyser /cpu CPU specific files 18892bbd64eSDaniel Schwierzeck /mips32 Files specific to MIPS32 CPUs 18980421fccSXiangfu Liu /xburst Files specific to Ingenic XBurst CPUs 1908d321b81SPeter Tyser /lib Architecture specific library files 191afc1ce82SMacpaul Lin /nds32 Files generic to NDS32 architecture 192afc1ce82SMacpaul Lin /cpu CPU specific files 193afc1ce82SMacpaul Lin /n1213 Files specific to Andes Technology N1213 CPUs 194afc1ce82SMacpaul Lin /lib Architecture specific library files 1958d321b81SPeter Tyser /nios2 Files generic to Altera NIOS2 architecture 1968d321b81SPeter Tyser /cpu CPU specific files 1978d321b81SPeter Tyser /lib Architecture specific library files 198a47a12beSStefan Roese /powerpc Files generic to PowerPC architecture 1998d321b81SPeter Tyser /cpu CPU specific files 2008d321b81SPeter Tyser /74xx_7xx Files specific to Freescale MPC74xx and 7xx CPUs 2018d321b81SPeter Tyser /mpc5xx Files specific to Freescale MPC5xx CPUs 2028d321b81SPeter Tyser /mpc5xxx Files specific to Freescale MPC5xxx CPUs 2038d321b81SPeter Tyser /mpc8xx Files specific to Freescale MPC8xx CPUs 2048d321b81SPeter Tyser /mpc824x Files specific to Freescale MPC824x CPUs 2058d321b81SPeter Tyser /mpc8260 Files specific to Freescale MPC8260 CPUs 2068d321b81SPeter Tyser /mpc85xx Files specific to Freescale MPC85xx CPUs 2078d321b81SPeter Tyser /ppc4xx Files specific to AMCC PowerPC 4xx CPUs 2088d321b81SPeter Tyser /lib Architecture specific library files 2098d321b81SPeter Tyser /sh Files generic to SH architecture 2108d321b81SPeter Tyser /cpu CPU specific files 2118d321b81SPeter Tyser /sh2 Files specific to sh2 CPUs 2128d321b81SPeter Tyser /sh3 Files specific to sh3 CPUs 2138d321b81SPeter Tyser /sh4 Files specific to sh4 CPUs 2148d321b81SPeter Tyser /lib Architecture specific library files 2158d321b81SPeter Tyser /sparc Files generic to SPARC architecture 2168d321b81SPeter Tyser /cpu CPU specific files 2178d321b81SPeter Tyser /leon2 Files specific to Gaisler LEON2 SPARC CPU 2188d321b81SPeter Tyser /leon3 Files specific to Gaisler LEON3 SPARC CPU 2198d321b81SPeter Tyser /lib Architecture specific library files 2208d321b81SPeter Tyser/api Machine/arch independent API for external apps 2218d321b81SPeter Tyser/board Board dependent files 2228d321b81SPeter Tyser/common Misc architecture independent functions 2238d321b81SPeter Tyser/disk Code for disk drive partition handling 2248d321b81SPeter Tyser/doc Documentation (don't expect too much) 2258d321b81SPeter Tyser/drivers Commonly used device drivers 2268d321b81SPeter Tyser/examples Example code for standalone applications, etc. 2278d321b81SPeter Tyser/fs Filesystem code (cramfs, ext2, jffs2, etc.) 2288d321b81SPeter Tyser/include Header Files 2298d321b81SPeter Tyser/lib Files generic to all architectures 2308d321b81SPeter Tyser /libfdt Library files to support flattened device trees 2318d321b81SPeter Tyser /lzma Library files to support LZMA decompression 2328d321b81SPeter Tyser /lzo Library files to support LZO decompression 2338d321b81SPeter Tyser/net Networking code 2348d321b81SPeter Tyser/post Power On Self Test 2358d321b81SPeter Tyser/rtc Real Time Clock drivers 2368d321b81SPeter Tyser/tools Tools to build S-Record or U-Boot images, etc. 237c609719bSwdenk 238c609719bSwdenkSoftware Configuration: 239c609719bSwdenk======================= 240c609719bSwdenk 241c609719bSwdenkConfiguration is usually done using C preprocessor defines; the 242c609719bSwdenkrationale behind that is to avoid dead code whenever possible. 243c609719bSwdenk 244c609719bSwdenkThere are two classes of configuration variables: 245c609719bSwdenk 246c609719bSwdenk* Configuration _OPTIONS_: 247c609719bSwdenk These are selectable by the user and have names beginning with 248c609719bSwdenk "CONFIG_". 249c609719bSwdenk 250c609719bSwdenk* Configuration _SETTINGS_: 251c609719bSwdenk These depend on the hardware etc. and should not be meddled with if 252c609719bSwdenk you don't know what you're doing; they have names beginning with 2536d0f6bcfSJean-Christophe PLAGNIOL-VILLARD "CONFIG_SYS_". 254c609719bSwdenk 255c609719bSwdenkLater we will add a configuration tool - probably similar to or even 256c609719bSwdenkidentical to what's used for the Linux kernel. Right now, we have to 257c609719bSwdenkdo the configuration by hand, which means creating some symbolic 258c609719bSwdenklinks and editing some configuration files. We use the TQM8xxL boards 259c609719bSwdenkas an example here. 260c609719bSwdenk 261c609719bSwdenk 262c609719bSwdenkSelection of Processor Architecture and Board Type: 263c609719bSwdenk--------------------------------------------------- 264c609719bSwdenk 265c609719bSwdenkFor all supported boards there are ready-to-use default 266c609719bSwdenkconfigurations available; just type "make <board_name>_config". 267c609719bSwdenk 268c609719bSwdenkExample: For a TQM823L module type: 269c609719bSwdenk 270c609719bSwdenk cd u-boot 271c609719bSwdenk make TQM823L_config 272c609719bSwdenk 27311ccc33fSMarcel ZiswilerFor the Cogent platform, you need to specify the CPU type as well; 274c609719bSwdenke.g. "make cogent_mpc8xx_config". And also configure the cogent 275c609719bSwdenkdirectory according to the instructions in cogent/README. 276c609719bSwdenk 277c609719bSwdenk 278c609719bSwdenkConfiguration Options: 279c609719bSwdenk---------------------- 280c609719bSwdenk 281c609719bSwdenkConfiguration depends on the combination of board and CPU type; all 282c609719bSwdenksuch information is kept in a configuration file 283c609719bSwdenk"include/configs/<board_name>.h". 284c609719bSwdenk 285c609719bSwdenkExample: For a TQM823L module, all configuration settings are in 286c609719bSwdenk"include/configs/TQM823L.h". 287c609719bSwdenk 288c609719bSwdenk 2897f6c2cbcSwdenkMany of the options are named exactly as the corresponding Linux 2907f6c2cbcSwdenkkernel configuration options. The intention is to make it easier to 2917f6c2cbcSwdenkbuild a config tool - later. 2927f6c2cbcSwdenk 2937f6c2cbcSwdenk 294c609719bSwdenkThe following options need to be configured: 295c609719bSwdenk 2962628114eSKim Phillips- CPU Type: Define exactly one, e.g. CONFIG_MPC85XX. 297c609719bSwdenk 2982628114eSKim Phillips- Board Type: Define exactly one, e.g. CONFIG_MPC8540ADS. 2996ccec449SWolfgang Denk 3006ccec449SWolfgang Denk- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined) 30109ea0de0SHaavard Skinnemoen Define exactly one, e.g. CONFIG_ATSTK1002 302c609719bSwdenk 303c609719bSwdenk- CPU Module Type: (if CONFIG_COGENT is defined) 304c609719bSwdenk Define exactly one of 305c609719bSwdenk CONFIG_CMA286_60_OLD 306c609719bSwdenk--- FIXME --- not tested yet: 307c609719bSwdenk CONFIG_CMA286_60, CONFIG_CMA286_21, CONFIG_CMA286_60P, 308c609719bSwdenk CONFIG_CMA287_23, CONFIG_CMA287_50 309c609719bSwdenk 310c609719bSwdenk- Motherboard Type: (if CONFIG_COGENT is defined) 311c609719bSwdenk Define exactly one of 312c609719bSwdenk CONFIG_CMA101, CONFIG_CMA102 313c609719bSwdenk 314c609719bSwdenk- Motherboard I/O Modules: (if CONFIG_COGENT is defined) 315c609719bSwdenk Define one or more of 316c609719bSwdenk CONFIG_CMA302 317c609719bSwdenk 318c609719bSwdenk- Motherboard Options: (if CONFIG_CMA101 or CONFIG_CMA102 are defined) 319c609719bSwdenk Define one or more of 320c609719bSwdenk CONFIG_LCD_HEARTBEAT - update a character position on 32111ccc33fSMarcel Ziswiler the LCD display every second with 322c609719bSwdenk a "rotator" |\-/|\-/ 323c609719bSwdenk 3242535d602Swdenk- Board flavour: (if CONFIG_MPC8260ADS is defined) 3252535d602Swdenk CONFIG_ADSTYPE 3262535d602Swdenk Possible values are: 3276d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_8260ADS - original MPC8260ADS 3286d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_8266ADS - MPC8266ADS 3296d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PQ2FADS - PQ2FADS-ZU or PQ2FADS-VR 3306d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_8272ADS - MPC8272ADS 3312535d602Swdenk 332cf946c6dSLei Wen- Marvell Family Member 333cf946c6dSLei Wen CONFIG_SYS_MVFS - define it if you want to enable 334cf946c6dSLei Wen multiple fs option at one time 335cf946c6dSLei Wen for marvell soc family 336cf946c6dSLei Wen 337c609719bSwdenk- MPC824X Family Member (if CONFIG_MPC824X is defined) 338c609719bSwdenk Define exactly one of 339c609719bSwdenk CONFIG_MPC8240, CONFIG_MPC8245 340c609719bSwdenk 34111ccc33fSMarcel Ziswiler- 8xx CPU Options: (if using an MPC8xx CPU) 34266ca92a5Swdenk CONFIG_8xx_GCLK_FREQ - deprecated: CPU clock if 34366ca92a5Swdenk get_gclk_freq() cannot work 3445da627a4Swdenk e.g. if there is no 32KHz 3455da627a4Swdenk reference PIT/RTC clock 34666ca92a5Swdenk CONFIG_8xx_OSCLK - PLL input clock (either EXTCLK 34766ca92a5Swdenk or XTAL/EXTAL) 348c609719bSwdenk 34966ca92a5Swdenk- 859/866/885 CPU options: (if using a MPC859 or MPC866 or MPC885 CPU): 3506d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_8xx_CPUCLK_MIN 3516d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_8xx_CPUCLK_MAX 35266ca92a5Swdenk CONFIG_8xx_CPUCLK_DEFAULT 35375d1ea7fSwdenk See doc/README.MPC866 35475d1ea7fSwdenk 3556d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_MEASURE_CPUCLK 35675d1ea7fSwdenk 35775d1ea7fSwdenk Define this to measure the actual CPU clock instead 35875d1ea7fSwdenk of relying on the correctness of the configured 35975d1ea7fSwdenk values. Mostly useful for board bringup to make sure 36075d1ea7fSwdenk the PLL is locked at the intended frequency. Note 36175d1ea7fSwdenk that this requires a (stable) reference clock (32 kHz 3626d0f6bcfSJean-Christophe PLAGNIOL-VILLARD RTC clock or CONFIG_SYS_8XX_XIN) 36375d1ea7fSwdenk 364506f3918SHeiko Schocher CONFIG_SYS_DELAYED_ICACHE 365506f3918SHeiko Schocher 366506f3918SHeiko Schocher Define this option if you want to enable the 367506f3918SHeiko Schocher ICache only when Code runs from RAM. 368506f3918SHeiko Schocher 36966412c63SKumar Gala- 85xx CPU Options: 370ffd06e02SYork Sun CONFIG_SYS_PPC64 371ffd06e02SYork Sun 372ffd06e02SYork Sun Specifies that the core is a 64-bit PowerPC implementation (implements 373ffd06e02SYork Sun the "64" category of the Power ISA). This is necessary for ePAPR 374ffd06e02SYork Sun compliance, among other possible reasons. 375ffd06e02SYork Sun 37666412c63SKumar Gala CONFIG_SYS_FSL_TBCLK_DIV 37766412c63SKumar Gala 37866412c63SKumar Gala Defines the core time base clock divider ratio compared to the 37966412c63SKumar Gala system clock. On most PQ3 devices this is 8, on newer QorIQ 38066412c63SKumar Gala devices it can be 16 or 32. The ratio varies from SoC to Soc. 38166412c63SKumar Gala 3828f29084aSKumar Gala CONFIG_SYS_FSL_PCIE_COMPAT 3838f29084aSKumar Gala 3848f29084aSKumar Gala Defines the string to utilize when trying to match PCIe device 3858f29084aSKumar Gala tree nodes for the given platform. 3868f29084aSKumar Gala 387afa6b551SPrabhakar Kushwaha CONFIG_SYS_PPC_E500_DEBUG_TLB 388afa6b551SPrabhakar Kushwaha 389afa6b551SPrabhakar Kushwaha Enables a temporary TLB entry to be used during boot to work 390afa6b551SPrabhakar Kushwaha around limitations in e500v1 and e500v2 external debugger 391afa6b551SPrabhakar Kushwaha support. This reduces the portions of the boot code where 392afa6b551SPrabhakar Kushwaha breakpoints and single stepping do not work. The value of this 393afa6b551SPrabhakar Kushwaha symbol should be set to the TLB1 entry to be used for this 394afa6b551SPrabhakar Kushwaha purpose. 395afa6b551SPrabhakar Kushwaha 39633eee330SScott Wood CONFIG_SYS_FSL_ERRATUM_A004510 39733eee330SScott Wood 39833eee330SScott Wood Enables a workaround for erratum A004510. If set, 39933eee330SScott Wood then CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV and 40033eee330SScott Wood CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY must be set. 40133eee330SScott Wood 40233eee330SScott Wood CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 40333eee330SScott Wood CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 (optional) 40433eee330SScott Wood 40533eee330SScott Wood Defines one or two SoC revisions (low 8 bits of SVR) 40633eee330SScott Wood for which the A004510 workaround should be applied. 40733eee330SScott Wood 40833eee330SScott Wood The rest of SVR is either not relevant to the decision 40933eee330SScott Wood of whether the erratum is present (e.g. p2040 versus 41033eee330SScott Wood p2041) or is implied by the build target, which controls 41133eee330SScott Wood whether CONFIG_SYS_FSL_ERRATUM_A004510 is set. 41233eee330SScott Wood 41333eee330SScott Wood See Freescale App Note 4493 for more information about 41433eee330SScott Wood this erratum. 41533eee330SScott Wood 41674fa22edSPrabhakar Kushwaha CONFIG_A003399_NOR_WORKAROUND 41774fa22edSPrabhakar Kushwaha Enables a workaround for IFC erratum A003399. It is only 41874fa22edSPrabhakar Kushwaha requred during NOR boot. 41974fa22edSPrabhakar Kushwaha 42033eee330SScott Wood CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 42133eee330SScott Wood 42233eee330SScott Wood This is the value to write into CCSR offset 0x18600 42333eee330SScott Wood according to the A004510 workaround. 42433eee330SScott Wood 425765b0bdbSPriyanka Jain CONFIG_SYS_FSL_DSP_M2_RAM_ADDR 426765b0bdbSPriyanka Jain This value denotes start offset of M2 memory 427765b0bdbSPriyanka Jain which is directly connected to the DSP core. 428765b0bdbSPriyanka Jain 429765b0bdbSPriyanka Jain CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 430765b0bdbSPriyanka Jain This value denotes start offset of DSP CCSR space. 431765b0bdbSPriyanka Jain 4326cb461b4SDaniel Schwierzeck- Generic CPU options: 4336cb461b4SDaniel Schwierzeck CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN 4346cb461b4SDaniel Schwierzeck 4356cb461b4SDaniel Schwierzeck Defines the endianess of the CPU. Implementation of those 4366cb461b4SDaniel Schwierzeck values is arch specific. 4376cb461b4SDaniel Schwierzeck 4380b953ffcSMarkus Klotzbuecher- Intel Monahans options: 4396d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO 4400b953ffcSMarkus Klotzbuecher 4410b953ffcSMarkus Klotzbuecher Defines the Monahans run mode to oscillator 4420b953ffcSMarkus Klotzbuecher ratio. Valid values are 8, 16, 24, 31. The core 4430b953ffcSMarkus Klotzbuecher frequency is this value multiplied by 13 MHz. 4440b953ffcSMarkus Klotzbuecher 4456d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO 4460b953ffcSMarkus Klotzbuecher 4470b953ffcSMarkus Klotzbuecher Defines the Monahans turbo mode to oscillator 4480b953ffcSMarkus Klotzbuecher ratio. Valid values are 1 (default if undefined) and 4490b953ffcSMarkus Klotzbuecher 2. The core frequency as calculated above is multiplied 4500b953ffcSMarkus Klotzbuecher by this value. 4510b953ffcSMarkus Klotzbuecher 45292bbd64eSDaniel Schwierzeck- MIPS CPU options: 45392bbd64eSDaniel Schwierzeck CONFIG_SYS_INIT_SP_OFFSET 45492bbd64eSDaniel Schwierzeck 45592bbd64eSDaniel Schwierzeck Offset relative to CONFIG_SYS_SDRAM_BASE for initial stack 45692bbd64eSDaniel Schwierzeck pointer. This is needed for the temporary stack before 45792bbd64eSDaniel Schwierzeck relocation. 45892bbd64eSDaniel Schwierzeck 45992bbd64eSDaniel Schwierzeck CONFIG_SYS_MIPS_CACHE_MODE 46092bbd64eSDaniel Schwierzeck 46192bbd64eSDaniel Schwierzeck Cache operation mode for the MIPS CPU. 46292bbd64eSDaniel Schwierzeck See also arch/mips/include/asm/mipsregs.h. 46392bbd64eSDaniel Schwierzeck Possible values are: 46492bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_NO_WA 46592bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_WA 46692bbd64eSDaniel Schwierzeck CONF_CM_UNCACHED 46792bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_NONCOHERENT 46892bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_CE 46992bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_COW 47092bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_CUW 47192bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_ACCELERATED 47292bbd64eSDaniel Schwierzeck 47392bbd64eSDaniel Schwierzeck CONFIG_SYS_XWAY_EBU_BOOTCFG 47492bbd64eSDaniel Schwierzeck 47592bbd64eSDaniel Schwierzeck Special option for Lantiq XWAY SoCs for booting from NOR flash. 47692bbd64eSDaniel Schwierzeck See also arch/mips/cpu/mips32/start.S. 47792bbd64eSDaniel Schwierzeck 47892bbd64eSDaniel Schwierzeck CONFIG_XWAY_SWAP_BYTES 47992bbd64eSDaniel Schwierzeck 48092bbd64eSDaniel Schwierzeck Enable compilation of tools/xway-swap-bytes needed for Lantiq 48192bbd64eSDaniel Schwierzeck XWAY SoCs for booting from NOR flash. The U-Boot image needs to 48292bbd64eSDaniel Schwierzeck be swapped if a flash programmer is used. 48392bbd64eSDaniel Schwierzeck 484b67d8816SChristian Riesch- ARM options: 485b67d8816SChristian Riesch CONFIG_SYS_EXCEPTION_VECTORS_HIGH 486b67d8816SChristian Riesch 487b67d8816SChristian Riesch Select high exception vectors of the ARM core, e.g., do not 488b67d8816SChristian Riesch clear the V bit of the c1 register of CP15. 489b67d8816SChristian Riesch 4905356f545SAneesh V CONFIG_SYS_THUMB_BUILD 4915356f545SAneesh V 4925356f545SAneesh V Use this flag to build U-Boot using the Thumb instruction 4935356f545SAneesh V set for ARM architectures. Thumb instruction set provides 4945356f545SAneesh V better code density. For ARM architectures that support 4955356f545SAneesh V Thumb2 this flag will result in Thumb2 code generated by 4965356f545SAneesh V GCC. 4975356f545SAneesh V 498c5d4752cSStephen Warren CONFIG_ARM_ERRATA_716044 4990678587fSStephen Warren CONFIG_ARM_ERRATA_742230 5000678587fSStephen Warren CONFIG_ARM_ERRATA_743622 5010678587fSStephen Warren CONFIG_ARM_ERRATA_751472 5020678587fSStephen Warren 5030678587fSStephen Warren If set, the workarounds for these ARM errata are applied early 5040678587fSStephen Warren during U-Boot startup. Note that these options force the 5050678587fSStephen Warren workarounds to be applied; no CPU-type/version detection 5060678587fSStephen Warren exists, unlike the similar options in the Linux kernel. Do not 5070678587fSStephen Warren set these options unless they apply! 5080678587fSStephen Warren 509795659dcSStephen Warren- CPU timer options: 510795659dcSStephen Warren CONFIG_SYS_HZ 511795659dcSStephen Warren 512795659dcSStephen Warren The frequency of the timer returned by get_timer(). 513795659dcSStephen Warren get_timer() must operate in milliseconds and this CONFIG 514795659dcSStephen Warren option must be set to 1000. 515795659dcSStephen Warren 5165da627a4Swdenk- Linux Kernel Interface: 517c609719bSwdenk CONFIG_CLOCKS_IN_MHZ 518c609719bSwdenk 519c609719bSwdenk U-Boot stores all clock information in Hz 520c609719bSwdenk internally. For binary compatibility with older Linux 521c609719bSwdenk kernels (which expect the clocks passed in the 522c609719bSwdenk bd_info data to be in MHz) the environment variable 523c609719bSwdenk "clocks_in_mhz" can be defined so that U-Boot 524c609719bSwdenk converts clock data to MHZ before passing it to the 525c609719bSwdenk Linux kernel. 526c609719bSwdenk When CONFIG_CLOCKS_IN_MHZ is defined, a definition of 527c609719bSwdenk "clocks_in_mhz=1" is automatically included in the 528c609719bSwdenk default environment. 529c609719bSwdenk 5305da627a4Swdenk CONFIG_MEMSIZE_IN_BYTES [relevant for MIPS only] 5315da627a4Swdenk 53211ccc33fSMarcel Ziswiler When transferring memsize parameter to linux, some versions 5335da627a4Swdenk expect it to be in bytes, others in MB. 5345da627a4Swdenk Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes. 5355da627a4Swdenk 536fec6d9eeSGerald Van Baren CONFIG_OF_LIBFDT 537f57f70aaSWolfgang Denk 538f57f70aaSWolfgang Denk New kernel versions are expecting firmware settings to be 539213bf8c8SGerald Van Baren passed using flattened device trees (based on open firmware 540213bf8c8SGerald Van Baren concepts). 541213bf8c8SGerald Van Baren 542213bf8c8SGerald Van Baren CONFIG_OF_LIBFDT 543213bf8c8SGerald Van Baren * New libfdt-based support 544213bf8c8SGerald Van Baren * Adds the "fdt" command 5453bb342fcSKim Phillips * The bootm command automatically updates the fdt 546213bf8c8SGerald Van Baren 547b55ae402SMarcel Ziswiler OF_CPU - The proper name of the cpus node (only required for 548b55ae402SMarcel Ziswiler MPC512X and MPC5xxx based boards). 549b55ae402SMarcel Ziswiler OF_SOC - The proper name of the soc node (only required for 550b55ae402SMarcel Ziswiler MPC512X and MPC5xxx based boards). 551f57f70aaSWolfgang Denk OF_TBCLK - The timebase frequency. 552c2871f03SKumar Gala OF_STDOUT_PATH - The path to the console device 553f57f70aaSWolfgang Denk 55411ccc33fSMarcel Ziswiler boards with QUICC Engines require OF_QE to set UCC MAC 55511ccc33fSMarcel Ziswiler addresses 5563bb342fcSKim Phillips 5574e253137SKumar Gala CONFIG_OF_BOARD_SETUP 5584e253137SKumar Gala 5594e253137SKumar Gala Board code has addition modification that it wants to make 5604e253137SKumar Gala to the flat device tree before handing it off to the kernel 5616705d81eSwdenk 5620267768eSMatthew McClintock CONFIG_OF_BOOT_CPU 5630267768eSMatthew McClintock 56411ccc33fSMarcel Ziswiler This define fills in the correct boot CPU in the boot 5650267768eSMatthew McClintock param header, the default value is zero if undefined. 5660267768eSMatthew McClintock 5673887c3fbSHeiko Schocher CONFIG_OF_IDE_FIXUP 5683887c3fbSHeiko Schocher 5693887c3fbSHeiko Schocher U-Boot can detect if an IDE device is present or not. 5703887c3fbSHeiko Schocher If not, and this new config option is activated, U-Boot 5713887c3fbSHeiko Schocher removes the ATA node from the DTS before booting Linux, 5723887c3fbSHeiko Schocher so the Linux IDE driver does not probe the device and 5733887c3fbSHeiko Schocher crash. This is needed for buggy hardware (uc101) where 5743887c3fbSHeiko Schocher no pull down resistor is connected to the signal IDE5V_DD7. 5753887c3fbSHeiko Schocher 5767eb29398SIgor Grinberg CONFIG_MACH_TYPE [relevant for ARM only][mandatory] 5777eb29398SIgor Grinberg 5787eb29398SIgor Grinberg This setting is mandatory for all boards that have only one 5797eb29398SIgor Grinberg machine type and must be used to specify the machine type 5807eb29398SIgor Grinberg number as it appears in the ARM machine registry 5817eb29398SIgor Grinberg (see http://www.arm.linux.org.uk/developer/machines/). 5827eb29398SIgor Grinberg Only boards that have multiple machine types supported 5837eb29398SIgor Grinberg in a single configuration file and the machine type is 5847eb29398SIgor Grinberg runtime discoverable, do not have to use this setting. 5857eb29398SIgor Grinberg 5860b2f4ecaSNiklaus Giger- vxWorks boot parameters: 5870b2f4ecaSNiklaus Giger 5880b2f4ecaSNiklaus Giger bootvx constructs a valid bootline using the following 5890b2f4ecaSNiklaus Giger environments variables: bootfile, ipaddr, serverip, hostname. 5900b2f4ecaSNiklaus Giger It loads the vxWorks image pointed bootfile. 5910b2f4ecaSNiklaus Giger 5920b2f4ecaSNiklaus Giger CONFIG_SYS_VXWORKS_BOOT_DEVICE - The vxworks device name 5930b2f4ecaSNiklaus Giger CONFIG_SYS_VXWORKS_MAC_PTR - Ethernet 6 byte MA -address 5940b2f4ecaSNiklaus Giger CONFIG_SYS_VXWORKS_SERVERNAME - Name of the server 5950b2f4ecaSNiklaus Giger CONFIG_SYS_VXWORKS_BOOT_ADDR - Address of boot parameters 5960b2f4ecaSNiklaus Giger 5970b2f4ecaSNiklaus Giger CONFIG_SYS_VXWORKS_ADD_PARAMS 5980b2f4ecaSNiklaus Giger 5990b2f4ecaSNiklaus Giger Add it at the end of the bootline. E.g "u=username pw=secret" 6000b2f4ecaSNiklaus Giger 6010b2f4ecaSNiklaus Giger Note: If a "bootargs" environment is defined, it will overwride 6020b2f4ecaSNiklaus Giger the defaults discussed just above. 6030b2f4ecaSNiklaus Giger 6042c451f78SAneesh V- Cache Configuration: 6052c451f78SAneesh V CONFIG_SYS_ICACHE_OFF - Do not enable instruction cache in U-Boot 6062c451f78SAneesh V CONFIG_SYS_DCACHE_OFF - Do not enable data cache in U-Boot 6072c451f78SAneesh V CONFIG_SYS_L2CACHE_OFF- Do not enable L2 cache in U-Boot 6082c451f78SAneesh V 60993bc2193SAneesh V- Cache Configuration for ARM: 61093bc2193SAneesh V CONFIG_SYS_L2_PL310 - Enable support for ARM PL310 L2 cache 61193bc2193SAneesh V controller 61293bc2193SAneesh V CONFIG_SYS_PL310_BASE - Physical base address of PL310 61393bc2193SAneesh V controller register space 61493bc2193SAneesh V 6156705d81eSwdenk- Serial Ports: 61648d0192fSAndreas Engel CONFIG_PL010_SERIAL 6176705d81eSwdenk 6186705d81eSwdenk Define this if you want support for Amba PrimeCell PL010 UARTs. 6196705d81eSwdenk 62048d0192fSAndreas Engel CONFIG_PL011_SERIAL 6216705d81eSwdenk 6226705d81eSwdenk Define this if you want support for Amba PrimeCell PL011 UARTs. 6236705d81eSwdenk 6246705d81eSwdenk CONFIG_PL011_CLOCK 6256705d81eSwdenk 6266705d81eSwdenk If you have Amba PrimeCell PL011 UARTs, set this variable to 6276705d81eSwdenk the clock speed of the UARTs. 6286705d81eSwdenk 6296705d81eSwdenk CONFIG_PL01x_PORTS 6306705d81eSwdenk 6316705d81eSwdenk If you have Amba PrimeCell PL010 or PL011 UARTs on your board, 6326705d81eSwdenk define this to a list of base addresses for each (supported) 6336705d81eSwdenk port. See e.g. include/configs/versatile.h 6346705d81eSwdenk 635910f1ae3SJohn Rigby CONFIG_PL011_SERIAL_RLCR 636910f1ae3SJohn Rigby 637910f1ae3SJohn Rigby Some vendor versions of PL011 serial ports (e.g. ST-Ericsson U8500) 638910f1ae3SJohn Rigby have separate receive and transmit line control registers. Set 639910f1ae3SJohn Rigby this variable to initialize the extra register. 640910f1ae3SJohn Rigby 641910f1ae3SJohn Rigby CONFIG_PL011_SERIAL_FLUSH_ON_INIT 642910f1ae3SJohn Rigby 643910f1ae3SJohn Rigby On some platforms (e.g. U8500) U-Boot is loaded by a second stage 644910f1ae3SJohn Rigby boot loader that has already initialized the UART. Define this 645910f1ae3SJohn Rigby variable to flush the UART at init time. 646910f1ae3SJohn Rigby 6476705d81eSwdenk 648c609719bSwdenk- Console Interface: 649c609719bSwdenk Depending on board, define exactly one serial port 650c609719bSwdenk (like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2, 651c609719bSwdenk CONFIG_8xx_CONS_SCC1, ...), or switch off the serial 652c609719bSwdenk console by defining CONFIG_8xx_CONS_NONE 653c609719bSwdenk 654c609719bSwdenk Note: if CONFIG_8xx_CONS_NONE is defined, the serial 655c609719bSwdenk port routines must be defined elsewhere 656c609719bSwdenk (i.e. serial_init(), serial_getc(), ...) 657c609719bSwdenk 658c609719bSwdenk CONFIG_CFB_CONSOLE 659c609719bSwdenk Enables console device for a color framebuffer. Needs following 660c53043b7SWolfgang Denk defines (cf. smiLynxEM, i8042) 661c609719bSwdenk VIDEO_FB_LITTLE_ENDIAN graphic memory organisation 662c609719bSwdenk (default big endian) 663c609719bSwdenk VIDEO_HW_RECTFILL graphic chip supports 664c609719bSwdenk rectangle fill 665c609719bSwdenk (cf. smiLynxEM) 666c609719bSwdenk VIDEO_HW_BITBLT graphic chip supports 667c609719bSwdenk bit-blit (cf. smiLynxEM) 668c609719bSwdenk VIDEO_VISIBLE_COLS visible pixel columns 669c609719bSwdenk (cols=pitch) 670c609719bSwdenk VIDEO_VISIBLE_ROWS visible pixel rows 671c609719bSwdenk VIDEO_PIXEL_SIZE bytes per pixel 672c609719bSwdenk VIDEO_DATA_FORMAT graphic data format 673c609719bSwdenk (0-5, cf. cfb_console.c) 674c609719bSwdenk VIDEO_FB_ADRS framebuffer address 675c609719bSwdenk VIDEO_KBD_INIT_FCT keyboard int fct 676c609719bSwdenk (i.e. i8042_kbd_init()) 677c609719bSwdenk VIDEO_TSTC_FCT test char fct 678c609719bSwdenk (i.e. i8042_tstc) 679c609719bSwdenk VIDEO_GETC_FCT get char fct 680c609719bSwdenk (i.e. i8042_getc) 681c609719bSwdenk CONFIG_CONSOLE_CURSOR cursor drawing on/off 682c609719bSwdenk (requires blink timer 683c609719bSwdenk cf. i8042.c) 6846d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_CONSOLE_BLINK_COUNT blink interval (cf. i8042.c) 685c609719bSwdenk CONFIG_CONSOLE_TIME display time/date info in 686c609719bSwdenk upper right corner 687602ad3b3SJon Loeliger (requires CONFIG_CMD_DATE) 688c609719bSwdenk CONFIG_VIDEO_LOGO display Linux logo in 689c609719bSwdenk upper left corner 690a6c7ad2fSwdenk CONFIG_VIDEO_BMP_LOGO use bmp_logo.h instead of 691a6c7ad2fSwdenk linux_logo.h for logo. 692a6c7ad2fSwdenk Requires CONFIG_VIDEO_LOGO 693c609719bSwdenk CONFIG_CONSOLE_EXTRA_INFO 69411ccc33fSMarcel Ziswiler additional board info beside 695c609719bSwdenk the logo 696c609719bSwdenk 69733a35bbbSPali Rohár When CONFIG_CFB_CONSOLE_ANSI is defined, console will support 69833a35bbbSPali Rohár a limited number of ANSI escape sequences (cursor control, 69933a35bbbSPali Rohár erase functions and limited graphics rendition control). 70033a35bbbSPali Rohár 701c609719bSwdenk When CONFIG_CFB_CONSOLE is defined, video console is 702c609719bSwdenk default i/o. Serial console can be forced with 703c609719bSwdenk environment 'console=serial'. 704c609719bSwdenk 705a3ad8e26Swdenk When CONFIG_SILENT_CONSOLE is defined, all console 706a3ad8e26Swdenk messages (by U-Boot and Linux!) can be silenced with 707a3ad8e26Swdenk the "silent" environment variable. See 708a3ad8e26Swdenk doc/README.silent for more information. 709a3ad8e26Swdenk 710c609719bSwdenk- Console Baudrate: 711c609719bSwdenk CONFIG_BAUDRATE - in bps 712c609719bSwdenk Select one of the baudrates listed in 7136d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_BAUDRATE_TABLE, see below. 7146d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_BRGCLK_PRESCALE, baudrate prescale 715c609719bSwdenk 716c92fac91SHeiko Schocher- Console Rx buffer length 717c92fac91SHeiko Schocher With CONFIG_SYS_SMC_RXBUFLEN it is possible to define 718c92fac91SHeiko Schocher the maximum receive buffer length for the SMC. 7192b3f12c2SHeiko Schocher This option is actual only for 82xx and 8xx possible. 720c92fac91SHeiko Schocher If using CONFIG_SYS_SMC_RXBUFLEN also CONFIG_SYS_MAXIDLE 721c92fac91SHeiko Schocher must be defined, to setup the maximum idle timeout for 722c92fac91SHeiko Schocher the SMC. 723c92fac91SHeiko Schocher 7249558b48aSGraeme Russ- Pre-Console Buffer: 7259558b48aSGraeme Russ Prior to the console being initialised (i.e. serial UART 7269558b48aSGraeme Russ initialised etc) all console output is silently discarded. 7279558b48aSGraeme Russ Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to 7289558b48aSGraeme Russ buffer any console messages prior to the console being 7299558b48aSGraeme Russ initialised to a buffer of size CONFIG_PRE_CON_BUF_SZ 7309558b48aSGraeme Russ bytes located at CONFIG_PRE_CON_BUF_ADDR. The buffer is 7319558b48aSGraeme Russ a circular buffer, so if more than CONFIG_PRE_CON_BUF_SZ 7329558b48aSGraeme Russ bytes are output before the console is initialised, the 7339558b48aSGraeme Russ earlier bytes are discarded. 7349558b48aSGraeme Russ 7359558b48aSGraeme Russ 'Sane' compilers will generate smaller code if 7369558b48aSGraeme Russ CONFIG_PRE_CON_BUF_SZ is a power of 2 7379558b48aSGraeme Russ 738046a37bdSSonny Rao- Safe printf() functions 739046a37bdSSonny Rao Define CONFIG_SYS_VSNPRINTF to compile in safe versions of 740046a37bdSSonny Rao the printf() functions. These are defined in 741046a37bdSSonny Rao include/vsprintf.h and include snprintf(), vsnprintf() and 742046a37bdSSonny Rao so on. Code size increase is approximately 300-500 bytes. 743046a37bdSSonny Rao If this option is not given then these functions will 744046a37bdSSonny Rao silently discard their buffer size argument - this means 745046a37bdSSonny Rao you are not getting any overflow checking in this case. 746046a37bdSSonny Rao 747c609719bSwdenk- Boot Delay: CONFIG_BOOTDELAY - in seconds 748c609719bSwdenk Delay before automatically booting the default image; 749c609719bSwdenk set to -1 to disable autoboot. 75093d7212fSJoe Hershberger set to -2 to autoboot with no delay and not check for abort 75193d7212fSJoe Hershberger (even when CONFIG_ZERO_BOOTDELAY_CHECK is defined). 752c609719bSwdenk 753c609719bSwdenk See doc/README.autoboot for these options that 754c609719bSwdenk work with CONFIG_BOOTDELAY. None are required. 755c609719bSwdenk CONFIG_BOOT_RETRY_TIME 756c609719bSwdenk CONFIG_BOOT_RETRY_MIN 757c609719bSwdenk CONFIG_AUTOBOOT_KEYED 758c609719bSwdenk CONFIG_AUTOBOOT_PROMPT 759c609719bSwdenk CONFIG_AUTOBOOT_DELAY_STR 760c609719bSwdenk CONFIG_AUTOBOOT_STOP_STR 761c609719bSwdenk CONFIG_AUTOBOOT_DELAY_STR2 762c609719bSwdenk CONFIG_AUTOBOOT_STOP_STR2 763c609719bSwdenk CONFIG_ZERO_BOOTDELAY_CHECK 764c609719bSwdenk CONFIG_RESET_TO_RETRY 765c609719bSwdenk 766c609719bSwdenk- Autoboot Command: 767c609719bSwdenk CONFIG_BOOTCOMMAND 768c609719bSwdenk Only needed when CONFIG_BOOTDELAY is enabled; 769c609719bSwdenk define a command string that is automatically executed 770c609719bSwdenk when no character is read on the console interface 771c609719bSwdenk within "Boot Delay" after reset. 772c609719bSwdenk 773c609719bSwdenk CONFIG_BOOTARGS 774c609719bSwdenk This can be used to pass arguments to the bootm 775c609719bSwdenk command. The value of CONFIG_BOOTARGS goes into the 776c609719bSwdenk environment value "bootargs". 777c609719bSwdenk 778c609719bSwdenk CONFIG_RAMBOOT and CONFIG_NFSBOOT 779c609719bSwdenk The value of these goes into the environment as 780c609719bSwdenk "ramboot" and "nfsboot" respectively, and can be used 781c609719bSwdenk as a convenience, when switching between booting from 78211ccc33fSMarcel Ziswiler RAM and NFS. 783c609719bSwdenk 784c609719bSwdenk- Pre-Boot Commands: 785c609719bSwdenk CONFIG_PREBOOT 786c609719bSwdenk 787c609719bSwdenk When this option is #defined, the existence of the 788c609719bSwdenk environment variable "preboot" will be checked 789c609719bSwdenk immediately before starting the CONFIG_BOOTDELAY 790c609719bSwdenk countdown and/or running the auto-boot command resp. 791c609719bSwdenk entering interactive mode. 792c609719bSwdenk 793c609719bSwdenk This feature is especially useful when "preboot" is 794c609719bSwdenk automatically generated or modified. For an example 795c609719bSwdenk see the LWMON board specific code: here "preboot" is 796c609719bSwdenk modified when the user holds down a certain 797c609719bSwdenk combination of keys on the (special) keyboard when 798c609719bSwdenk booting the systems 799c609719bSwdenk 800c609719bSwdenk- Serial Download Echo Mode: 801c609719bSwdenk CONFIG_LOADS_ECHO 802c609719bSwdenk If defined to 1, all characters received during a 803c609719bSwdenk serial download (using the "loads" command) are 804c609719bSwdenk echoed back. This might be needed by some terminal 805c609719bSwdenk emulations (like "cu"), but may as well just take 806c609719bSwdenk time on others. This setting #define's the initial 807c609719bSwdenk value of the "loads_echo" environment variable. 808c609719bSwdenk 809602ad3b3SJon Loeliger- Kgdb Serial Baudrate: (if CONFIG_CMD_KGDB is defined) 810c609719bSwdenk CONFIG_KGDB_BAUDRATE 811c609719bSwdenk Select one of the baudrates listed in 8126d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_BAUDRATE_TABLE, see below. 813c609719bSwdenk 814c609719bSwdenk- Monitor Functions: 815602ad3b3SJon Loeliger Monitor commands can be included or excluded 816602ad3b3SJon Loeliger from the build by using the #include files 817c6c621bdSStephen Warren <config_cmd_all.h> and #undef'ing unwanted 818c6c621bdSStephen Warren commands, or using <config_cmd_default.h> 819602ad3b3SJon Loeliger and augmenting with additional #define's 820602ad3b3SJon Loeliger for wanted commands. 821c609719bSwdenk 822602ad3b3SJon Loeliger The default command configuration includes all commands 823602ad3b3SJon Loeliger except those marked below with a "*". 824602ad3b3SJon Loeliger 825602ad3b3SJon Loeliger CONFIG_CMD_ASKENV * ask for env variable 826602ad3b3SJon Loeliger CONFIG_CMD_BDI bdinfo 827602ad3b3SJon Loeliger CONFIG_CMD_BEDBUG * Include BedBug Debugger 828602ad3b3SJon Loeliger CONFIG_CMD_BMP * BMP support 829602ad3b3SJon Loeliger CONFIG_CMD_BSP * Board specific commands 830602ad3b3SJon Loeliger CONFIG_CMD_BOOTD bootd 831602ad3b3SJon Loeliger CONFIG_CMD_CACHE * icache, dcache 832602ad3b3SJon Loeliger CONFIG_CMD_CONSOLE coninfo 833710b9938SMike Frysinger CONFIG_CMD_CRC32 * crc32 834602ad3b3SJon Loeliger CONFIG_CMD_DATE * support for RTC, date/time... 835602ad3b3SJon Loeliger CONFIG_CMD_DHCP * DHCP support 836602ad3b3SJon Loeliger CONFIG_CMD_DIAG * Diagnostics 837a7c93104SPeter Tyser CONFIG_CMD_DS4510 * ds4510 I2C gpio commands 838a7c93104SPeter Tyser CONFIG_CMD_DS4510_INFO * ds4510 I2C info command 839a7c93104SPeter Tyser CONFIG_CMD_DS4510_MEM * ds4510 I2C eeprom/sram commansd 840a7c93104SPeter Tyser CONFIG_CMD_DS4510_RST * ds4510 I2C rst command 841602ad3b3SJon Loeliger CONFIG_CMD_DTT * Digital Therm and Thermostat 842602ad3b3SJon Loeliger CONFIG_CMD_ECHO echo arguments 843246c6922SPeter Tyser CONFIG_CMD_EDITENV edit env variable 844602ad3b3SJon Loeliger CONFIG_CMD_EEPROM * EEPROM read/write support 845602ad3b3SJon Loeliger CONFIG_CMD_ELF * bootelf, bootvx 8465e2b3e0cSJoe Hershberger CONFIG_CMD_ENV_CALLBACK * display details about env callbacks 847fffad71bSJoe Hershberger CONFIG_CMD_ENV_FLAGS * display details about env flags 8480c79cda0SMike Frysinger CONFIG_CMD_EXPORTENV * export the environment 84903e2ecf6SStephen Warren CONFIG_CMD_EXT2 * ext2 command support 85003e2ecf6SStephen Warren CONFIG_CMD_EXT4 * ext4 command support 851bdab39d3SMike Frysinger CONFIG_CMD_SAVEENV saveenv 852602ad3b3SJon Loeliger CONFIG_CMD_FDC * Floppy Disk Support 85303e2ecf6SStephen Warren CONFIG_CMD_FAT * FAT command support 854602ad3b3SJon Loeliger CONFIG_CMD_FDOS * Dos diskette Support 855602ad3b3SJon Loeliger CONFIG_CMD_FLASH flinfo, erase, protect 856602ad3b3SJon Loeliger CONFIG_CMD_FPGA FPGA device initialization support 857ccca7dfdSBenoît Thébaudeau CONFIG_CMD_FUSE Device fuse support 85853fdc7efSAnton Staaf CONFIG_CMD_GETTIME * Get time since boot 859a641b979SMike Frysinger CONFIG_CMD_GO * the 'go' command (exec code) 860a000b795SKim Phillips CONFIG_CMD_GREPENV * search environment 861bf36c5d5SSimon Glass CONFIG_CMD_HASH * calculate hash / digest 862602ad3b3SJon Loeliger CONFIG_CMD_HWFLOW * RTS/CTS hw flow control 863602ad3b3SJon Loeliger CONFIG_CMD_I2C * I2C serial bus support 864602ad3b3SJon Loeliger CONFIG_CMD_IDE * IDE harddisk support 865602ad3b3SJon Loeliger CONFIG_CMD_IMI iminfo 8668fdf1e0fSVipin Kumar CONFIG_CMD_IMLS List all images found in NOR flash 8678fdf1e0fSVipin Kumar CONFIG_CMD_IMLS_NAND List all images found in NAND flash 868602ad3b3SJon Loeliger CONFIG_CMD_IMMAP * IMMR dump support 8690c79cda0SMike Frysinger CONFIG_CMD_IMPORTENV * import an environment 870c167cc02SJoe Hershberger CONFIG_CMD_INI * import data from an ini file into the env 871602ad3b3SJon Loeliger CONFIG_CMD_IRQ * irqinfo 872602ad3b3SJon Loeliger CONFIG_CMD_ITEST Integer/string test of 2 values 873602ad3b3SJon Loeliger CONFIG_CMD_JFFS2 * JFFS2 Support 874602ad3b3SJon Loeliger CONFIG_CMD_KGDB * kgdb 8751ba7fd25SMike Frysinger CONFIG_CMD_LDRINFO ldrinfo (display Blackfin loader) 876d22c338eSJoe Hershberger CONFIG_CMD_LINK_LOCAL * link-local IP address auto-configuration 877d22c338eSJoe Hershberger (169.254.*.*) 878602ad3b3SJon Loeliger CONFIG_CMD_LOADB loadb 879602ad3b3SJon Loeliger CONFIG_CMD_LOADS loads 88002c9aa1dSRobin Getz CONFIG_CMD_MD5SUM print md5 message digest 88102c9aa1dSRobin Getz (requires CONFIG_CMD_MEMORY and CONFIG_MD5) 88215a33e49SSimon Glass CONFIG_CMD_MEMINFO * Display detailed memory information 883602ad3b3SJon Loeliger CONFIG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, 884a2681707SWolfgang Denk loop, loopw 885a2681707SWolfgang Denk CONFIG_CMD_MEMTEST mtest 886602ad3b3SJon Loeliger CONFIG_CMD_MISC Misc functions like sleep etc 887602ad3b3SJon Loeliger CONFIG_CMD_MMC * MMC memory mapped support 888602ad3b3SJon Loeliger CONFIG_CMD_MII * MII utility commands 88968d7d651SStefan Roese CONFIG_CMD_MTDPARTS * MTD partition support 890602ad3b3SJon Loeliger CONFIG_CMD_NAND * NAND support 891602ad3b3SJon Loeliger CONFIG_CMD_NET bootp, tftpboot, rarpboot 892e92739d3SPeter Tyser CONFIG_CMD_PCA953X * PCA953x I2C gpio commands 893e92739d3SPeter Tyser CONFIG_CMD_PCA953X_INFO * PCA953x I2C gpio info command 894602ad3b3SJon Loeliger CONFIG_CMD_PCI * pciinfo 895602ad3b3SJon Loeliger CONFIG_CMD_PCMCIA * PCMCIA support 896602ad3b3SJon Loeliger CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network 897602ad3b3SJon Loeliger host 898602ad3b3SJon Loeliger CONFIG_CMD_PORTIO * Port I/O 899ff048ea9SKenneth Waters CONFIG_CMD_READ * Read raw data from partition 900602ad3b3SJon Loeliger CONFIG_CMD_REGINFO * Register dump 901602ad3b3SJon Loeliger CONFIG_CMD_RUN run command in env variable 902d304931fSSimon Glass CONFIG_CMD_SANDBOX * sb command to access sandbox features 903602ad3b3SJon Loeliger CONFIG_CMD_SAVES * save S record dump 904602ad3b3SJon Loeliger CONFIG_CMD_SCSI * SCSI Support 905602ad3b3SJon Loeliger CONFIG_CMD_SDRAM * print SDRAM configuration information 906602ad3b3SJon Loeliger (requires CONFIG_CMD_I2C) 907602ad3b3SJon Loeliger CONFIG_CMD_SETGETDCR Support for DCR Register access 908602ad3b3SJon Loeliger (4xx only) 909f61ec45eSEric Nelson CONFIG_CMD_SF * Read/write/erase SPI NOR flash 910c6b1ee66SAlexander Holler CONFIG_CMD_SHA1SUM print sha1 memory digest 91102c9aa1dSRobin Getz (requires CONFIG_CMD_MEMORY) 9127d861d95SBob Liu CONFIG_CMD_SOFTSWITCH * Soft switch setting command for BF60x 91374de7aefSWolfgang Denk CONFIG_CMD_SOURCE "source" command Support 914602ad3b3SJon Loeliger CONFIG_CMD_SPI * SPI serial bus support 9157a83af07SLuca Ceresoli CONFIG_CMD_TFTPSRV * TFTP transfer in server mode 9161fb7cd49SSimon Glass CONFIG_CMD_TFTPPUT * TFTP put command (upload) 917da83bcd7SJoe Hershberger CONFIG_CMD_TIME * run command and report execution time (ARM specific) 918da83bcd7SJoe Hershberger CONFIG_CMD_TIMER * access to the system tick timer 919602ad3b3SJon Loeliger CONFIG_CMD_USB * USB support 920602ad3b3SJon Loeliger CONFIG_CMD_CDP * Cisco Discover Protocol support 921c8339f51SMarek Vasut CONFIG_CMD_MFSL * Microblaze FSL support 922c609719bSwdenk 923c609719bSwdenk 924c609719bSwdenk EXAMPLE: If you want all functions except of network 925c609719bSwdenk support you can write: 926c609719bSwdenk 927602ad3b3SJon Loeliger #include "config_cmd_all.h" 928602ad3b3SJon Loeliger #undef CONFIG_CMD_NET 929c609719bSwdenk 930213bf8c8SGerald Van Baren Other Commands: 931213bf8c8SGerald Van Baren fdt (flattened device tree) command: CONFIG_OF_LIBFDT 932c609719bSwdenk 933c609719bSwdenk Note: Don't enable the "icache" and "dcache" commands 934602ad3b3SJon Loeliger (configuration option CONFIG_CMD_CACHE) unless you know 935c609719bSwdenk what you (and your U-Boot users) are doing. Data 936c609719bSwdenk cache cannot be enabled on systems like the 8xx or 937c609719bSwdenk 8260 (where accesses to the IMMR region must be 938c609719bSwdenk uncached), and it cannot be disabled on all other 939c609719bSwdenk systems where we (mis-) use the data cache to hold an 940c609719bSwdenk initial stack and some data. 941c609719bSwdenk 942c609719bSwdenk 943c609719bSwdenk XXX - this list needs to get updated! 944c609719bSwdenk 945a5ecbe62SWolfgang Denk- Regular expression support: 946a5ecbe62SWolfgang Denk CONFIG_REGEX 947a5ecbe62SWolfgang Denk If this variable is defined, U-Boot is linked against 948a5ecbe62SWolfgang Denk the SLRE (Super Light Regular Expression) library, 949a5ecbe62SWolfgang Denk which adds regex support to some commands, as for 950a5ecbe62SWolfgang Denk example "env grep" and "setexpr". 951a5ecbe62SWolfgang Denk 95245ba8077SSimon Glass- Device tree: 95345ba8077SSimon Glass CONFIG_OF_CONTROL 95445ba8077SSimon Glass If this variable is defined, U-Boot will use a device tree 95545ba8077SSimon Glass to configure its devices, instead of relying on statically 95645ba8077SSimon Glass compiled #defines in the board file. This option is 95745ba8077SSimon Glass experimental and only available on a few boards. The device 95845ba8077SSimon Glass tree is available in the global data as gd->fdt_blob. 95945ba8077SSimon Glass 9602c0f79e4SSimon Glass U-Boot needs to get its device tree from somewhere. This can 9612c0f79e4SSimon Glass be done using one of the two options below: 962bbb0b128SSimon Glass 963bbb0b128SSimon Glass CONFIG_OF_EMBED 964bbb0b128SSimon Glass If this variable is defined, U-Boot will embed a device tree 965bbb0b128SSimon Glass binary in its image. This device tree file should be in the 966bbb0b128SSimon Glass board directory and called <soc>-<board>.dts. The binary file 967bbb0b128SSimon Glass is then picked up in board_init_f() and made available through 968bbb0b128SSimon Glass the global data structure as gd->blob. 96945ba8077SSimon Glass 9702c0f79e4SSimon Glass CONFIG_OF_SEPARATE 9712c0f79e4SSimon Glass If this variable is defined, U-Boot will build a device tree 9722c0f79e4SSimon Glass binary. It will be called u-boot.dtb. Architecture-specific 9732c0f79e4SSimon Glass code will locate it at run-time. Generally this works by: 9742c0f79e4SSimon Glass 9752c0f79e4SSimon Glass cat u-boot.bin u-boot.dtb >image.bin 9762c0f79e4SSimon Glass 9772c0f79e4SSimon Glass and in fact, U-Boot does this for you, creating a file called 9782c0f79e4SSimon Glass u-boot-dtb.bin which is useful in the common case. You can 9792c0f79e4SSimon Glass still use the individual files if you need something more 9802c0f79e4SSimon Glass exotic. 9812c0f79e4SSimon Glass 982c609719bSwdenk- Watchdog: 983c609719bSwdenk CONFIG_WATCHDOG 984c609719bSwdenk If this variable is defined, it enables watchdog 9856abe6fb6SDetlev Zundel support for the SoC. There must be support in the SoC 9866abe6fb6SDetlev Zundel specific code for a watchdog. For the 8xx and 8260 9876abe6fb6SDetlev Zundel CPUs, the SIU Watchdog feature is enabled in the SYPCR 9886abe6fb6SDetlev Zundel register. When supported for a specific SoC is 9896abe6fb6SDetlev Zundel available, then no further board specific code should 9906abe6fb6SDetlev Zundel be needed to use it. 9916abe6fb6SDetlev Zundel 9926abe6fb6SDetlev Zundel CONFIG_HW_WATCHDOG 9936abe6fb6SDetlev Zundel When using a watchdog circuitry external to the used 9946abe6fb6SDetlev Zundel SoC, then define this variable and provide board 9956abe6fb6SDetlev Zundel specific code for the "hw_watchdog_reset" function. 996c609719bSwdenk 997c1551ea8Sstroese- U-Boot Version: 998c1551ea8Sstroese CONFIG_VERSION_VARIABLE 999c1551ea8Sstroese If this variable is defined, an environment variable 1000c1551ea8Sstroese named "ver" is created by U-Boot showing the U-Boot 1001c1551ea8Sstroese version as printed by the "version" command. 1002a1ea8e51SBenoît Thébaudeau Any change to this variable will be reverted at the 1003a1ea8e51SBenoît Thébaudeau next reset. 1004c1551ea8Sstroese 1005c609719bSwdenk- Real-Time Clock: 1006c609719bSwdenk 1007602ad3b3SJon Loeliger When CONFIG_CMD_DATE is selected, the type of the RTC 1008c609719bSwdenk has to be selected, too. Define exactly one of the 1009c609719bSwdenk following options: 1010c609719bSwdenk 1011c609719bSwdenk CONFIG_RTC_MPC8xx - use internal RTC of MPC8xx 1012c609719bSwdenk CONFIG_RTC_PCF8563 - use Philips PCF8563 RTC 10134e8b7544SFabio Estevam CONFIG_RTC_MC13XXX - use MC13783 or MC13892 RTC 1014c609719bSwdenk CONFIG_RTC_MC146818 - use MC146818 RTC 10151cb8e980Swdenk CONFIG_RTC_DS1307 - use Maxim, Inc. DS1307 RTC 1016c609719bSwdenk CONFIG_RTC_DS1337 - use Maxim, Inc. DS1337 RTC 10177f70e853Swdenk CONFIG_RTC_DS1338 - use Maxim, Inc. DS1338 RTC 10183bac3513Swdenk CONFIG_RTC_DS164x - use Dallas DS164x RTC 10199536dfccSTor Krill CONFIG_RTC_ISL1208 - use Intersil ISL1208 RTC 10204c0d4c3bSwdenk CONFIG_RTC_MAX6900 - use Maxim, Inc. MAX6900 RTC 10216d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_RTC_DS1337_NOOSC - Turn off the OSC output for DS1337 102271d19f30SHeiko Schocher CONFIG_SYS_RV3029_TCR - enable trickle charger on 102371d19f30SHeiko Schocher RV3029 RTC. 1024c609719bSwdenk 1025b37c7e5eSwdenk Note that if the RTC uses I2C, then the I2C interface 1026b37c7e5eSwdenk must also be configured. See I2C Support, below. 1027b37c7e5eSwdenk 1028e92739d3SPeter Tyser- GPIO Support: 1029e92739d3SPeter Tyser CONFIG_PCA953X - use NXP's PCA953X series I2C GPIO 1030e92739d3SPeter Tyser CONFIG_PCA953X_INFO - enable pca953x info command 1031e92739d3SPeter Tyser 10325dec49caSChris Packham The CONFIG_SYS_I2C_PCA953X_WIDTH option specifies a list of 10335dec49caSChris Packham chip-ngpio pairs that tell the PCA953X driver the number of 10345dec49caSChris Packham pins supported by a particular chip. 10355dec49caSChris Packham 1036e92739d3SPeter Tyser Note that if the GPIO device uses I2C, then the I2C interface 1037e92739d3SPeter Tyser must also be configured. See I2C Support, below. 1038e92739d3SPeter Tyser 1039c609719bSwdenk- Timestamp Support: 1040c609719bSwdenk 1041c609719bSwdenk When CONFIG_TIMESTAMP is selected, the timestamp 1042c609719bSwdenk (date and time) of an image is printed by image 1043c609719bSwdenk commands like bootm or iminfo. This option is 1044602ad3b3SJon Loeliger automatically enabled when you select CONFIG_CMD_DATE . 1045c609719bSwdenk 1046923c46f9SKarl O. Pinc- Partition Labels (disklabels) Supported: 1047923c46f9SKarl O. Pinc Zero or more of the following: 1048923c46f9SKarl O. Pinc CONFIG_MAC_PARTITION Apple's MacOS partition table. 1049923c46f9SKarl O. Pinc CONFIG_DOS_PARTITION MS Dos partition table, traditional on the 1050923c46f9SKarl O. Pinc Intel architecture, USB sticks, etc. 1051923c46f9SKarl O. Pinc CONFIG_ISO_PARTITION ISO partition table, used on CDROM etc. 1052923c46f9SKarl O. Pinc CONFIG_EFI_PARTITION GPT partition table, common when EFI is the 1053923c46f9SKarl O. Pinc bootloader. Note 2TB partition limit; see 1054923c46f9SKarl O. Pinc disk/part_efi.c 1055923c46f9SKarl O. Pinc CONFIG_MTD_PARTITIONS Memory Technology Device partition table. 1056c609719bSwdenk 1057602ad3b3SJon Loeliger If IDE or SCSI support is enabled (CONFIG_CMD_IDE or 1058218ca724SWolfgang Denk CONFIG_CMD_SCSI) you must configure support for at 1059923c46f9SKarl O. Pinc least one non-MTD partition type as well. 1060c609719bSwdenk 1061c609719bSwdenk- IDE Reset method: 10624d13cbadSwdenk CONFIG_IDE_RESET_ROUTINE - this is defined in several 10634d13cbadSwdenk board configurations files but used nowhere! 1064c609719bSwdenk 10654d13cbadSwdenk CONFIG_IDE_RESET - is this is defined, IDE Reset will 10664d13cbadSwdenk be performed by calling the function 10674d13cbadSwdenk ide_set_reset(int reset) 10684d13cbadSwdenk which has to be defined in a board specific file 1069c609719bSwdenk 1070c609719bSwdenk- ATAPI Support: 1071c609719bSwdenk CONFIG_ATAPI 1072c609719bSwdenk 1073c609719bSwdenk Set this to enable ATAPI support. 1074c609719bSwdenk 1075c40b2956Swdenk- LBA48 Support 1076c40b2956Swdenk CONFIG_LBA48 1077c40b2956Swdenk 1078c40b2956Swdenk Set this to enable support for disks larger than 137GB 10794b142febSHeiko Schocher Also look at CONFIG_SYS_64BIT_LBA. 1080c40b2956Swdenk Whithout these , LBA48 support uses 32bit variables and will 'only' 1081c40b2956Swdenk support disks up to 2.1TB. 1082c40b2956Swdenk 10836d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_64BIT_LBA: 1084c40b2956Swdenk When enabled, makes the IDE subsystem use 64bit sector addresses. 1085c40b2956Swdenk Default is 32bit. 1086c40b2956Swdenk 1087c609719bSwdenk- SCSI Support: 1088c609719bSwdenk At the moment only there is only support for the 1089c609719bSwdenk SYM53C8XX SCSI controller; define 1090c609719bSwdenk CONFIG_SCSI_SYM53C8XX to enable it. 1091c609719bSwdenk 10926d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SCSI_MAX_LUN [8], CONFIG_SYS_SCSI_MAX_SCSI_ID [7] and 10936d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SCSI_MAX_DEVICE [CONFIG_SYS_SCSI_MAX_SCSI_ID * 10946d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SCSI_MAX_LUN] can be adjusted to define the 1095c609719bSwdenk maximum numbers of LUNs, SCSI ID's and target 1096c609719bSwdenk devices. 10976d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz) 1098c609719bSwdenk 1099447c031bSStefan Reinauer The environment variable 'scsidevs' is set to the number of 1100447c031bSStefan Reinauer SCSI devices found during the last scan. 1101447c031bSStefan Reinauer 1102c609719bSwdenk- NETWORK Support (PCI): 1103682011ffSwdenk CONFIG_E1000 1104ce5207e1SKyle Moffett Support for Intel 8254x/8257x gigabit chips. 1105ce5207e1SKyle Moffett 1106ce5207e1SKyle Moffett CONFIG_E1000_SPI 1107ce5207e1SKyle Moffett Utility code for direct access to the SPI bus on Intel 8257x. 1108ce5207e1SKyle Moffett This does not do anything useful unless you set at least one 1109ce5207e1SKyle Moffett of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC. 1110ce5207e1SKyle Moffett 1111ce5207e1SKyle Moffett CONFIG_E1000_SPI_GENERIC 1112ce5207e1SKyle Moffett Allow generic access to the SPI bus on the Intel 8257x, for 1113ce5207e1SKyle Moffett example with the "sspi" command. 1114ce5207e1SKyle Moffett 1115ce5207e1SKyle Moffett CONFIG_CMD_E1000 1116ce5207e1SKyle Moffett Management command for E1000 devices. When used on devices 1117ce5207e1SKyle Moffett with SPI support you can reprogram the EEPROM from U-Boot. 1118682011ffSwdenk 1119ac3315c2SAndre Schwarz CONFIG_E1000_FALLBACK_MAC 112011ccc33fSMarcel Ziswiler default MAC for empty EEPROM after production. 1121ac3315c2SAndre Schwarz 1122c609719bSwdenk CONFIG_EEPRO100 1123c609719bSwdenk Support for Intel 82557/82559/82559ER chips. 112411ccc33fSMarcel Ziswiler Optional CONFIG_EEPRO100_SROM_WRITE enables EEPROM 1125c609719bSwdenk write routine for first time initialisation. 1126c609719bSwdenk 1127c609719bSwdenk CONFIG_TULIP 1128c609719bSwdenk Support for Digital 2114x chips. 1129c609719bSwdenk Optional CONFIG_TULIP_SELECT_MEDIA for board specific 1130c609719bSwdenk modem chip initialisation (KS8761/QS6611). 1131c609719bSwdenk 1132c609719bSwdenk CONFIG_NATSEMI 1133c609719bSwdenk Support for National dp83815 chips. 1134c609719bSwdenk 1135c609719bSwdenk CONFIG_NS8382X 1136c609719bSwdenk Support for National dp8382[01] gigabit chips. 1137c609719bSwdenk 113845219c46Swdenk- NETWORK Support (other): 113945219c46Swdenk 1140c041e9d2SJens Scharsig CONFIG_DRIVER_AT91EMAC 1141c041e9d2SJens Scharsig Support for AT91RM9200 EMAC. 1142c041e9d2SJens Scharsig 1143c041e9d2SJens Scharsig CONFIG_RMII 1144c041e9d2SJens Scharsig Define this to use reduced MII inteface 1145c041e9d2SJens Scharsig 1146c041e9d2SJens Scharsig CONFIG_DRIVER_AT91EMAC_QUIET 1147c041e9d2SJens Scharsig If this defined, the driver is quiet. 1148c041e9d2SJens Scharsig The driver doen't show link status messages. 1149c041e9d2SJens Scharsig 1150efdd7319SRob Herring CONFIG_CALXEDA_XGMAC 1151efdd7319SRob Herring Support for the Calxeda XGMAC device 1152efdd7319SRob Herring 11533bb46d23SAshok CONFIG_LAN91C96 115445219c46Swdenk Support for SMSC's LAN91C96 chips. 115545219c46Swdenk 115645219c46Swdenk CONFIG_LAN91C96_BASE 115745219c46Swdenk Define this to hold the physical address 115845219c46Swdenk of the LAN91C96's I/O space 115945219c46Swdenk 116045219c46Swdenk CONFIG_LAN91C96_USE_32_BIT 116145219c46Swdenk Define this to enable 32 bit addressing 116245219c46Swdenk 11633bb46d23SAshok CONFIG_SMC91111 1164f39748aeSwdenk Support for SMSC's LAN91C111 chip 1165f39748aeSwdenk 1166f39748aeSwdenk CONFIG_SMC91111_BASE 1167f39748aeSwdenk Define this to hold the physical address 1168f39748aeSwdenk of the device (I/O space) 1169f39748aeSwdenk 1170f39748aeSwdenk CONFIG_SMC_USE_32_BIT 1171f39748aeSwdenk Define this if data bus is 32 bits 1172f39748aeSwdenk 1173f39748aeSwdenk CONFIG_SMC_USE_IOFUNCS 1174f39748aeSwdenk Define this to use i/o functions instead of macros 1175f39748aeSwdenk (some hardware wont work with macros) 1176f39748aeSwdenk 1177dc02badaSHeiko Schocher CONFIG_DRIVER_TI_EMAC 1178dc02badaSHeiko Schocher Support for davinci emac 1179dc02badaSHeiko Schocher 1180dc02badaSHeiko Schocher CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT 1181dc02badaSHeiko Schocher Define this if you have more then 3 PHYs. 1182dc02badaSHeiko Schocher 1183b3dbf4a5SMacpaul Lin CONFIG_FTGMAC100 1184b3dbf4a5SMacpaul Lin Support for Faraday's FTGMAC100 Gigabit SoC Ethernet 1185b3dbf4a5SMacpaul Lin 1186b3dbf4a5SMacpaul Lin CONFIG_FTGMAC100_EGIGA 1187b3dbf4a5SMacpaul Lin Define this to use GE link update with gigabit PHY. 1188b3dbf4a5SMacpaul Lin Define this if FTGMAC100 is connected to gigabit PHY. 1189b3dbf4a5SMacpaul Lin If your system has 10/100 PHY only, it might not occur 1190b3dbf4a5SMacpaul Lin wrong behavior. Because PHY usually return timeout or 1191b3dbf4a5SMacpaul Lin useless data when polling gigabit status and gigabit 1192b3dbf4a5SMacpaul Lin control registers. This behavior won't affect the 1193b3dbf4a5SMacpaul Lin correctnessof 10/100 link speed update. 1194b3dbf4a5SMacpaul Lin 1195c2fff331SMike Rapoport CONFIG_SMC911X 1196557b377dSJens Gehrlein Support for SMSC's LAN911x and LAN921x chips 1197557b377dSJens Gehrlein 1198c2fff331SMike Rapoport CONFIG_SMC911X_BASE 1199557b377dSJens Gehrlein Define this to hold the physical address 1200557b377dSJens Gehrlein of the device (I/O space) 1201557b377dSJens Gehrlein 1202c2fff331SMike Rapoport CONFIG_SMC911X_32_BIT 1203557b377dSJens Gehrlein Define this if data bus is 32 bits 1204557b377dSJens Gehrlein 1205c2fff331SMike Rapoport CONFIG_SMC911X_16_BIT 1206557b377dSJens Gehrlein Define this if data bus is 16 bits. If your processor 1207557b377dSJens Gehrlein automatically converts one 32 bit word to two 16 bit 1208c2fff331SMike Rapoport words you may also try CONFIG_SMC911X_32_BIT. 1209557b377dSJens Gehrlein 12103d0075faSYoshihiro Shimoda CONFIG_SH_ETHER 12113d0075faSYoshihiro Shimoda Support for Renesas on-chip Ethernet controller 12123d0075faSYoshihiro Shimoda 12133d0075faSYoshihiro Shimoda CONFIG_SH_ETHER_USE_PORT 12143d0075faSYoshihiro Shimoda Define the number of ports to be used 12153d0075faSYoshihiro Shimoda 12163d0075faSYoshihiro Shimoda CONFIG_SH_ETHER_PHY_ADDR 12173d0075faSYoshihiro Shimoda Define the ETH PHY's address 12183d0075faSYoshihiro Shimoda 121968260aabSYoshihiro Shimoda CONFIG_SH_ETHER_CACHE_WRITEBACK 122068260aabSYoshihiro Shimoda If this option is set, the driver enables cache flush. 122168260aabSYoshihiro Shimoda 12225e124724SVadim Bendebury- TPM Support: 122390899cc0SChe-liang Chiou CONFIG_TPM 122490899cc0SChe-liang Chiou Support TPM devices. 122590899cc0SChe-liang Chiou 12261b393db5STom Wai-Hong Tam CONFIG_TPM_TIS_I2C 12271b393db5STom Wai-Hong Tam Support for i2c bus TPM devices. Only one device 12281b393db5STom Wai-Hong Tam per system is supported at this time. 12291b393db5STom Wai-Hong Tam 12301b393db5STom Wai-Hong Tam CONFIG_TPM_TIS_I2C_BUS_NUMBER 12311b393db5STom Wai-Hong Tam Define the the i2c bus number for the TPM device 12321b393db5STom Wai-Hong Tam 12331b393db5STom Wai-Hong Tam CONFIG_TPM_TIS_I2C_SLAVE_ADDRESS 12341b393db5STom Wai-Hong Tam Define the TPM's address on the i2c bus 12351b393db5STom Wai-Hong Tam 12361b393db5STom Wai-Hong Tam CONFIG_TPM_TIS_I2C_BURST_LIMITATION 12371b393db5STom Wai-Hong Tam Define the burst count bytes upper limit 12381b393db5STom Wai-Hong Tam 123990899cc0SChe-liang Chiou CONFIG_TPM_TIS_LPC 12405e124724SVadim Bendebury Support for generic parallel port TPM devices. Only one device 12415e124724SVadim Bendebury per system is supported at this time. 12425e124724SVadim Bendebury 12435e124724SVadim Bendebury CONFIG_TPM_TIS_BASE_ADDRESS 12445e124724SVadim Bendebury Base address where the generic TPM device is mapped 12455e124724SVadim Bendebury to. Contemporary x86 systems usually map it at 12465e124724SVadim Bendebury 0xfed40000. 12475e124724SVadim Bendebury 1248c609719bSwdenk- USB Support: 1249c609719bSwdenk At the moment only the UHCI host controller is 12504d13cbadSwdenk supported (PIP405, MIP405, MPC5200); define 1251c609719bSwdenk CONFIG_USB_UHCI to enable it. 1252c609719bSwdenk define CONFIG_USB_KEYBOARD to enable the USB Keyboard 125330d56faeSwdenk and define CONFIG_USB_STORAGE to enable the USB 1254c609719bSwdenk storage devices. 1255c609719bSwdenk Note: 1256c609719bSwdenk Supported are USB Keyboards and USB Floppy drives 1257c609719bSwdenk (TEAC FD-05PUB). 12584d13cbadSwdenk MPC5200 USB requires additional defines: 12594d13cbadSwdenk CONFIG_USB_CLOCK 12604d13cbadSwdenk for 528 MHz Clock: 0x0001bbbb 1261307ecb6dSEric Millbrandt CONFIG_PSC3_USB 1262307ecb6dSEric Millbrandt for USB on PSC3 12634d13cbadSwdenk CONFIG_USB_CONFIG 12644d13cbadSwdenk for differential drivers: 0x00001000 12654d13cbadSwdenk for single ended drivers: 0x00005000 1266307ecb6dSEric Millbrandt for differential drivers on PSC3: 0x00000100 1267307ecb6dSEric Millbrandt for single ended drivers on PSC3: 0x00004100 12686d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_USB_EVENT_POLL 1269fdcfaa1bSZhang Wei May be defined to allow interrupt polling 1270fdcfaa1bSZhang Wei instead of using asynchronous interrupts 12714d13cbadSwdenk 12729ab4ce22SSimon Glass CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the 12739ab4ce22SSimon Glass txfilltuning field in the EHCI controller on reset. 12749ab4ce22SSimon Glass 1275aa155058SKuo-Jung Su CONFIG_USB_HUB_MIN_POWER_ON_DELAY defines the minimum 1276aa155058SKuo-Jung Su interval for usb hub power-on delay.(minimum 100msec) 1277aa155058SKuo-Jung Su 127816c8d5e7SWolfgang Denk- USB Device: 127916c8d5e7SWolfgang Denk Define the below if you wish to use the USB console. 128016c8d5e7SWolfgang Denk Once firmware is rebuilt from a serial console issue the 128116c8d5e7SWolfgang Denk command "setenv stdin usbtty; setenv stdout usbtty" and 128211ccc33fSMarcel Ziswiler attach your USB cable. The Unix command "dmesg" should print 128316c8d5e7SWolfgang Denk it has found a new device. The environment variable usbtty 128416c8d5e7SWolfgang Denk can be set to gserial or cdc_acm to enable your device to 128516c8d5e7SWolfgang Denk appear to a USB host as a Linux gserial device or a 128616c8d5e7SWolfgang Denk Common Device Class Abstract Control Model serial device. 128716c8d5e7SWolfgang Denk If you select usbtty = gserial you should be able to enumerate 128816c8d5e7SWolfgang Denk a Linux host by 128916c8d5e7SWolfgang Denk # modprobe usbserial vendor=0xVendorID product=0xProductID 129016c8d5e7SWolfgang Denk else if using cdc_acm, simply setting the environment 129116c8d5e7SWolfgang Denk variable usbtty to be cdc_acm should suffice. The following 129216c8d5e7SWolfgang Denk might be defined in YourBoardName.h 129316c8d5e7SWolfgang Denk 129416c8d5e7SWolfgang Denk CONFIG_USB_DEVICE 129516c8d5e7SWolfgang Denk Define this to build a UDC device 129616c8d5e7SWolfgang Denk 129716c8d5e7SWolfgang Denk CONFIG_USB_TTY 129816c8d5e7SWolfgang Denk Define this to have a tty type of device available to 129916c8d5e7SWolfgang Denk talk to the UDC device 130016c8d5e7SWolfgang Denk 1301f9da0f89SVipin KUMAR CONFIG_USBD_HS 1302f9da0f89SVipin KUMAR Define this to enable the high speed support for usb 1303f9da0f89SVipin KUMAR device and usbtty. If this feature is enabled, a routine 1304f9da0f89SVipin KUMAR int is_usbd_high_speed(void) 1305f9da0f89SVipin KUMAR also needs to be defined by the driver to dynamically poll 1306f9da0f89SVipin KUMAR whether the enumeration has succeded at high speed or full 1307f9da0f89SVipin KUMAR speed. 1308f9da0f89SVipin KUMAR 13096d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_CONSOLE_IS_IN_ENV 131016c8d5e7SWolfgang Denk Define this if you want stdin, stdout &/or stderr to 131116c8d5e7SWolfgang Denk be set to usbtty. 131216c8d5e7SWolfgang Denk 131316c8d5e7SWolfgang Denk mpc8xx: 13146d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_USB_EXTC_CLK 0xBLAH 131516c8d5e7SWolfgang Denk Derive USB clock from external clock "blah" 13166d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_USB_EXTC_CLK 0x02 131716c8d5e7SWolfgang Denk 13186d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_USB_BRG_CLK 0xBLAH 131916c8d5e7SWolfgang Denk Derive USB clock from brgclk 13206d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_USB_BRG_CLK 0x04 132116c8d5e7SWolfgang Denk 132216c8d5e7SWolfgang Denk If you have a USB-IF assigned VendorID then you may wish to 132316c8d5e7SWolfgang Denk define your own vendor specific values either in BoardName.h 132416c8d5e7SWolfgang Denk or directly in usbd_vendor_info.h. If you don't define 132516c8d5e7SWolfgang Denk CONFIG_USBD_MANUFACTURER, CONFIG_USBD_PRODUCT_NAME, 132616c8d5e7SWolfgang Denk CONFIG_USBD_VENDORID and CONFIG_USBD_PRODUCTID, then U-Boot 132716c8d5e7SWolfgang Denk should pretend to be a Linux device to it's target host. 132816c8d5e7SWolfgang Denk 132916c8d5e7SWolfgang Denk CONFIG_USBD_MANUFACTURER 133016c8d5e7SWolfgang Denk Define this string as the name of your company for 133116c8d5e7SWolfgang Denk - CONFIG_USBD_MANUFACTURER "my company" 133216c8d5e7SWolfgang Denk 133316c8d5e7SWolfgang Denk CONFIG_USBD_PRODUCT_NAME 133416c8d5e7SWolfgang Denk Define this string as the name of your product 133516c8d5e7SWolfgang Denk - CONFIG_USBD_PRODUCT_NAME "acme usb device" 133616c8d5e7SWolfgang Denk 133716c8d5e7SWolfgang Denk CONFIG_USBD_VENDORID 133816c8d5e7SWolfgang Denk Define this as your assigned Vendor ID from the USB 133916c8d5e7SWolfgang Denk Implementors Forum. This *must* be a genuine Vendor ID 134016c8d5e7SWolfgang Denk to avoid polluting the USB namespace. 134116c8d5e7SWolfgang Denk - CONFIG_USBD_VENDORID 0xFFFF 134216c8d5e7SWolfgang Denk 134316c8d5e7SWolfgang Denk CONFIG_USBD_PRODUCTID 134416c8d5e7SWolfgang Denk Define this as the unique Product ID 134516c8d5e7SWolfgang Denk for your device 134616c8d5e7SWolfgang Denk - CONFIG_USBD_PRODUCTID 0xFFFF 1347c609719bSwdenk 1348d70a560fSIgor Grinberg- ULPI Layer Support: 1349d70a560fSIgor Grinberg The ULPI (UTMI Low Pin (count) Interface) PHYs are supported via 1350d70a560fSIgor Grinberg the generic ULPI layer. The generic layer accesses the ULPI PHY 1351d70a560fSIgor Grinberg via the platform viewport, so you need both the genric layer and 1352d70a560fSIgor Grinberg the viewport enabled. Currently only Chipidea/ARC based 1353d70a560fSIgor Grinberg viewport is supported. 1354d70a560fSIgor Grinberg To enable the ULPI layer support, define CONFIG_USB_ULPI and 1355d70a560fSIgor Grinberg CONFIG_USB_ULPI_VIEWPORT in your board configuration file. 13566d365ea0SLucas Stach If your ULPI phy needs a different reference clock than the 13576d365ea0SLucas Stach standard 24 MHz then you have to define CONFIG_ULPI_REF_CLK to 13586d365ea0SLucas Stach the appropriate value in Hz. 1359c609719bSwdenk 1360c609719bSwdenk- MMC Support: 1361c609719bSwdenk The MMC controller on the Intel PXA is supported. To 1362c609719bSwdenk enable this define CONFIG_MMC. The MMC can be 1363c609719bSwdenk accessed from the boot prompt by mapping the device 1364c609719bSwdenk to physical memory similar to flash. Command line is 1365602ad3b3SJon Loeliger enabled with CONFIG_CMD_MMC. The MMC driver also works with 1366602ad3b3SJon Loeliger the FAT fs. This is enabled with CONFIG_CMD_FAT. 1367c609719bSwdenk 1368afb35666SYoshihiro Shimoda CONFIG_SH_MMCIF 1369afb35666SYoshihiro Shimoda Support for Renesas on-chip MMCIF controller 1370afb35666SYoshihiro Shimoda 1371afb35666SYoshihiro Shimoda CONFIG_SH_MMCIF_ADDR 1372afb35666SYoshihiro Shimoda Define the base address of MMCIF registers 1373afb35666SYoshihiro Shimoda 1374afb35666SYoshihiro Shimoda CONFIG_SH_MMCIF_CLK 1375afb35666SYoshihiro Shimoda Define the clock frequency for MMCIF 1376afb35666SYoshihiro Shimoda 1377b3ba6e94STom Rini- USB Device Firmware Update (DFU) class support: 1378b3ba6e94STom Rini CONFIG_DFU_FUNCTION 1379b3ba6e94STom Rini This enables the USB portion of the DFU USB class 1380b3ba6e94STom Rini 1381b3ba6e94STom Rini CONFIG_CMD_DFU 1382b3ba6e94STom Rini This enables the command "dfu" which is used to have 1383b3ba6e94STom Rini U-Boot create a DFU class device via USB. This command 1384b3ba6e94STom Rini requires that the "dfu_alt_info" environment variable be 1385b3ba6e94STom Rini set and define the alt settings to expose to the host. 1386b3ba6e94STom Rini 1387b3ba6e94STom Rini CONFIG_DFU_MMC 1388b3ba6e94STom Rini This enables support for exposing (e)MMC devices via DFU. 1389b3ba6e94STom Rini 1390c6631764SPantelis Antoniou CONFIG_DFU_NAND 1391c6631764SPantelis Antoniou This enables support for exposing NAND devices via DFU. 1392c6631764SPantelis Antoniou 1393ea2453d5SPantelis Antoniou CONFIG_SYS_DFU_MAX_FILE_SIZE 1394ea2453d5SPantelis Antoniou When updating files rather than the raw storage device, 1395ea2453d5SPantelis Antoniou we use a static buffer to copy the file into and then write 1396ea2453d5SPantelis Antoniou the buffer once we've been given the whole file. Define 1397ea2453d5SPantelis Antoniou this to the maximum filesize (in bytes) for the buffer. 1398ea2453d5SPantelis Antoniou Default is 4 MiB if undefined. 1399ea2453d5SPantelis Antoniou 14006705d81eSwdenk- Journaling Flash filesystem support: 14016705d81eSwdenk CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE, 14026705d81eSwdenk CONFIG_JFFS2_NAND_DEV 14036705d81eSwdenk Define these for a default partition on a NAND device 14046705d81eSwdenk 14056d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_JFFS2_FIRST_SECTOR, 14066d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_JFFS2_FIRST_BANK, CONFIG_SYS_JFFS2_NUM_BANKS 14076705d81eSwdenk Define these for a default partition on a NOR device 14086705d81eSwdenk 14096d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_JFFS_CUSTOM_PART 14106705d81eSwdenk Define this to create an own partition. You have to provide a 14116705d81eSwdenk function struct part_info* jffs2_part_info(int part_num) 14126705d81eSwdenk 14136705d81eSwdenk If you define only one JFFS2 partition you may also want to 14146d0f6bcfSJean-Christophe PLAGNIOL-VILLARD #define CONFIG_SYS_JFFS_SINGLE_PART 1 14156705d81eSwdenk to disable the command chpart. This is the default when you 14166705d81eSwdenk have not defined a custom partition 14176705d81eSwdenk 1418c30a15e5SDonggeun Kim- FAT(File Allocation Table) filesystem write function support: 1419c30a15e5SDonggeun Kim CONFIG_FAT_WRITE 1420656f4c65SDonggeun Kim 1421656f4c65SDonggeun Kim Define this to enable support for saving memory data as a 1422656f4c65SDonggeun Kim file in FAT formatted partition. 1423656f4c65SDonggeun Kim 1424656f4c65SDonggeun Kim This will also enable the command "fatwrite" enabling the 1425656f4c65SDonggeun Kim user to write files to FAT. 1426c30a15e5SDonggeun Kim 142784cd9327SGabe BlackCBFS (Coreboot Filesystem) support 142884cd9327SGabe Black CONFIG_CMD_CBFS 142984cd9327SGabe Black 143084cd9327SGabe Black Define this to enable support for reading from a Coreboot 143184cd9327SGabe Black filesystem. Available commands are cbfsinit, cbfsinfo, cbfsls 143284cd9327SGabe Black and cbfsload. 143384cd9327SGabe Black 1434c609719bSwdenk- Keyboard Support: 1435c609719bSwdenk CONFIG_ISA_KEYBOARD 1436c609719bSwdenk 1437c609719bSwdenk Define this to enable standard (PC-Style) keyboard 1438c609719bSwdenk support 1439c609719bSwdenk 1440c609719bSwdenk CONFIG_I8042_KBD 1441c609719bSwdenk Standard PC keyboard driver with US (is default) and 1442c609719bSwdenk GERMAN key layout (switch via environment 'keymap=de') support. 1443c609719bSwdenk Export function i8042_kbd_init, i8042_tstc and i8042_getc 1444c609719bSwdenk for cfb_console. Supports cursor blinking. 1445c609719bSwdenk 1446c609719bSwdenk- Video support: 1447c609719bSwdenk CONFIG_VIDEO 1448c609719bSwdenk 1449c609719bSwdenk Define this to enable video support (for output to 1450c609719bSwdenk video). 1451c609719bSwdenk 1452c609719bSwdenk CONFIG_VIDEO_CT69000 1453c609719bSwdenk 1454c609719bSwdenk Enable Chips & Technologies 69000 Video chip 1455c609719bSwdenk 1456c609719bSwdenk CONFIG_VIDEO_SMI_LYNXEM 1457eeb1b77bSwdenk Enable Silicon Motion SMI 712/710/810 Video chip. The 1458eeb1b77bSwdenk video output is selected via environment 'videoout' 1459eeb1b77bSwdenk (1 = LCD and 2 = CRT). If videoout is undefined, CRT is 1460eeb1b77bSwdenk assumed. 1461c609719bSwdenk 1462eeb1b77bSwdenk For the CT69000 and SMI_LYNXEM drivers, videomode is 146311ccc33fSMarcel Ziswiler selected via environment 'videomode'. Two different ways 1464eeb1b77bSwdenk are possible: 1465eeb1b77bSwdenk - "videomode=num" 'num' is a standard LiLo mode numbers. 1466eeb1b77bSwdenk Following standard modes are supported (* is default): 1467eeb1b77bSwdenk 1468eeb1b77bSwdenk Colors 640x480 800x600 1024x768 1152x864 1280x1024 1469eeb1b77bSwdenk -------------+--------------------------------------------- 1470eeb1b77bSwdenk 8 bits | 0x301* 0x303 0x305 0x161 0x307 1471eeb1b77bSwdenk 15 bits | 0x310 0x313 0x316 0x162 0x319 1472eeb1b77bSwdenk 16 bits | 0x311 0x314 0x317 0x163 0x31A 1473eeb1b77bSwdenk 24 bits | 0x312 0x315 0x318 ? 0x31B 1474eeb1b77bSwdenk -------------+--------------------------------------------- 1475c609719bSwdenk (i.e. setenv videomode 317; saveenv; reset;) 1476c609719bSwdenk 1477eeb1b77bSwdenk - "videomode=bootargs" all the video parameters are parsed 14787817cb20SMarcel Ziswiler from the bootargs. (See drivers/video/videomodes.c) 1479eeb1b77bSwdenk 1480eeb1b77bSwdenk 1481a6c7ad2fSwdenk CONFIG_VIDEO_SED13806 1482a6c7ad2fSwdenk Enable Epson SED13806 driver. This driver supports 8bpp 1483a6c7ad2fSwdenk and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP 1484a6c7ad2fSwdenk or CONFIG_VIDEO_SED13806_16BPP 1485a6c7ad2fSwdenk 14867d3053fbSTimur Tabi CONFIG_FSL_DIU_FB 14877d3053fbSTimur Tabi Enable the Freescale DIU video driver. Reference boards for 14887d3053fbSTimur Tabi SOCs that have a DIU should define this macro to enable DIU 14897d3053fbSTimur Tabi support, and should also define these other macros: 14907d3053fbSTimur Tabi 14917d3053fbSTimur Tabi CONFIG_SYS_DIU_ADDR 14927d3053fbSTimur Tabi CONFIG_VIDEO 14937d3053fbSTimur Tabi CONFIG_CMD_BMP 14947d3053fbSTimur Tabi CONFIG_CFB_CONSOLE 14957d3053fbSTimur Tabi CONFIG_VIDEO_SW_CURSOR 14967d3053fbSTimur Tabi CONFIG_VGA_AS_SINGLE_DEVICE 14977d3053fbSTimur Tabi CONFIG_VIDEO_LOGO 14987d3053fbSTimur Tabi CONFIG_VIDEO_BMP_LOGO 14997d3053fbSTimur Tabi 1500ba8e76bdSTimur Tabi The DIU driver will look for the 'video-mode' environment 1501ba8e76bdSTimur Tabi variable, and if defined, enable the DIU as a console during 1502ba8e76bdSTimur Tabi boot. See the documentation file README.video for a 1503ba8e76bdSTimur Tabi description of this variable. 15047d3053fbSTimur Tabi 1505058d59b0SSimon Glass CONFIG_VIDEO_VGA 1506058d59b0SSimon Glass 1507058d59b0SSimon Glass Enable the VGA video / BIOS for x86. The alternative if you 1508058d59b0SSimon Glass are using coreboot is to use the coreboot frame buffer 1509058d59b0SSimon Glass driver. 1510058d59b0SSimon Glass 1511058d59b0SSimon Glass 1512682011ffSwdenk- Keyboard Support: 1513682011ffSwdenk CONFIG_KEYBOARD 1514682011ffSwdenk 1515682011ffSwdenk Define this to enable a custom keyboard support. 1516682011ffSwdenk This simply calls drv_keyboard_init() which must be 1517682011ffSwdenk defined in your board-specific files. 1518682011ffSwdenk The only board using this so far is RBC823. 1519a6c7ad2fSwdenk 1520c609719bSwdenk- LCD Support: CONFIG_LCD 1521c609719bSwdenk 1522c609719bSwdenk Define this to enable LCD support (for output to LCD 1523c609719bSwdenk display); also select one of the supported displays 1524c609719bSwdenk by defining one of these: 1525c609719bSwdenk 152639cf4804SStelian Pop CONFIG_ATMEL_LCD: 152739cf4804SStelian Pop 152839cf4804SStelian Pop HITACHI TX09D70VM1CCA, 3.5", 240x320. 152939cf4804SStelian Pop 1530fd3103bbSwdenk CONFIG_NEC_NL6448AC33: 1531c609719bSwdenk 1532fd3103bbSwdenk NEC NL6448AC33-18. Active, color, single scan. 1533c609719bSwdenk 1534fd3103bbSwdenk CONFIG_NEC_NL6448BC20 1535c609719bSwdenk 1536fd3103bbSwdenk NEC NL6448BC20-08. 6.5", 640x480. 1537fd3103bbSwdenk Active, color, single scan. 1538fd3103bbSwdenk 1539fd3103bbSwdenk CONFIG_NEC_NL6448BC33_54 1540fd3103bbSwdenk 1541fd3103bbSwdenk NEC NL6448BC33-54. 10.4", 640x480. 1542c609719bSwdenk Active, color, single scan. 1543c609719bSwdenk 1544c609719bSwdenk CONFIG_SHARP_16x9 1545c609719bSwdenk 1546c609719bSwdenk Sharp 320x240. Active, color, single scan. 1547c609719bSwdenk It isn't 16x9, and I am not sure what it is. 1548c609719bSwdenk 1549c609719bSwdenk CONFIG_SHARP_LQ64D341 1550c609719bSwdenk 1551c609719bSwdenk Sharp LQ64D341 display, 640x480. 1552c609719bSwdenk Active, color, single scan. 1553c609719bSwdenk 1554c609719bSwdenk CONFIG_HLD1045 1555c609719bSwdenk 1556c609719bSwdenk HLD1045 display, 640x480. 1557c609719bSwdenk Active, color, single scan. 1558c609719bSwdenk 1559c609719bSwdenk CONFIG_OPTREX_BW 1560c609719bSwdenk 1561c609719bSwdenk Optrex CBL50840-2 NF-FW 99 22 M5 1562c609719bSwdenk or 1563c609719bSwdenk Hitachi LMG6912RPFC-00T 1564c609719bSwdenk or 1565c609719bSwdenk Hitachi SP14Q002 1566c609719bSwdenk 1567c609719bSwdenk 320x240. Black & white. 1568c609719bSwdenk 1569c609719bSwdenk Normally display is black on white background; define 15706d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_WHITE_ON_BLACK to get it inverted. 1571c609719bSwdenk 1572676d319eSSimon Glass CONFIG_LCD_ALIGNMENT 1573676d319eSSimon Glass 1574676d319eSSimon Glass Normally the LCD is page-aligned (tyically 4KB). If this is 1575676d319eSSimon Glass defined then the LCD will be aligned to this value instead. 1576676d319eSSimon Glass For ARM it is sometimes useful to use MMU_SECTION_SIZE 1577676d319eSSimon Glass here, since it is cheaper to change data cache settings on 1578676d319eSSimon Glass a per-section basis. 1579676d319eSSimon Glass 15800d89efefSSimon Glass CONFIG_CONSOLE_SCROLL_LINES 15810d89efefSSimon Glass 15820d89efefSSimon Glass When the console need to be scrolled, this is the number of 15830d89efefSSimon Glass lines to scroll by. It defaults to 1. Increasing this makes 15840d89efefSSimon Glass the console jump but can help speed up operation when scrolling 15850d89efefSSimon Glass is slow. 1586676d319eSSimon Glass 158745d7f525STom Wai-Hong Tam CONFIG_LCD_BMP_RLE8 158845d7f525STom Wai-Hong Tam 158945d7f525STom Wai-Hong Tam Support drawing of RLE8-compressed bitmaps on the LCD. 159045d7f525STom Wai-Hong Tam 1591735987c5STom Wai-Hong Tam CONFIG_I2C_EDID 1592735987c5STom Wai-Hong Tam 1593735987c5STom Wai-Hong Tam Enables an 'i2c edid' command which can read EDID 1594735987c5STom Wai-Hong Tam information over I2C from an attached LCD display. 1595735987c5STom Wai-Hong Tam 15967152b1d0Swdenk- Splash Screen Support: CONFIG_SPLASH_SCREEN 1597d791b1dcSwdenk 1598d791b1dcSwdenk If this option is set, the environment is checked for 1599d791b1dcSwdenk a variable "splashimage". If found, the usual display 1600d791b1dcSwdenk of logo, copyright and system information on the LCD 1601e94d2cd9Swdenk is suppressed and the BMP image at the address 1602d791b1dcSwdenk specified in "splashimage" is loaded instead. The 1603d791b1dcSwdenk console is redirected to the "nulldev", too. This 1604d791b1dcSwdenk allows for a "silent" boot where a splash screen is 1605d791b1dcSwdenk loaded very quickly after power-on. 1606d791b1dcSwdenk 1607c0880485SNikita Kiryanov CONFIG_SPLASHIMAGE_GUARD 1608c0880485SNikita Kiryanov 1609c0880485SNikita Kiryanov If this option is set, then U-Boot will prevent the environment 1610c0880485SNikita Kiryanov variable "splashimage" from being set to a problematic address 1611c0880485SNikita Kiryanov (see README.displaying-bmps and README.arm-unaligned-accesses). 1612c0880485SNikita Kiryanov This option is useful for targets where, due to alignment 1613c0880485SNikita Kiryanov restrictions, an improperly aligned BMP image will cause a data 1614c0880485SNikita Kiryanov abort. If you think you will not have problems with unaligned 1615c0880485SNikita Kiryanov accesses (for example because your toolchain prevents them) 1616c0880485SNikita Kiryanov there is no need to set this option. 1617c0880485SNikita Kiryanov 16181ca298ceSMatthias Weisser CONFIG_SPLASH_SCREEN_ALIGN 16191ca298ceSMatthias Weisser 16201ca298ceSMatthias Weisser If this option is set the splash image can be freely positioned 16211ca298ceSMatthias Weisser on the screen. Environment variable "splashpos" specifies the 16221ca298ceSMatthias Weisser position as "x,y". If a positive number is given it is used as 16231ca298ceSMatthias Weisser number of pixel from left/top. If a negative number is given it 16241ca298ceSMatthias Weisser is used as number of pixel from right/bottom. You can also 16251ca298ceSMatthias Weisser specify 'm' for centering the image. 16261ca298ceSMatthias Weisser 16271ca298ceSMatthias Weisser Example: 16281ca298ceSMatthias Weisser setenv splashpos m,m 16291ca298ceSMatthias Weisser => image at center of screen 16301ca298ceSMatthias Weisser 16311ca298ceSMatthias Weisser setenv splashpos 30,20 16321ca298ceSMatthias Weisser => image at x = 30 and y = 20 16331ca298ceSMatthias Weisser 16341ca298ceSMatthias Weisser setenv splashpos -10,m 16351ca298ceSMatthias Weisser => vertically centered image 16361ca298ceSMatthias Weisser at x = dspWidth - bmpWidth - 9 16371ca298ceSMatthias Weisser 1638581bb419SNikita Kiryanov CONFIG_SPLASH_SCREEN_PREPARE 1639581bb419SNikita Kiryanov 1640581bb419SNikita Kiryanov If this option is set then the board_splash_screen_prepare() 1641581bb419SNikita Kiryanov function, which must be defined in your code, is called as part 1642581bb419SNikita Kiryanov of the splash screen display sequence. It gives the board an 1643581bb419SNikita Kiryanov opportunity to prepare the splash image data before it is 1644581bb419SNikita Kiryanov processed and sent to the frame buffer by U-Boot. 1645581bb419SNikita Kiryanov 164698f4a3dfSStefan Roese- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP 164798f4a3dfSStefan Roese 164898f4a3dfSStefan Roese If this option is set, additionally to standard BMP 164998f4a3dfSStefan Roese images, gzipped BMP images can be displayed via the 165098f4a3dfSStefan Roese splashscreen support or the bmp command. 165198f4a3dfSStefan Roese 1652d5011762SAnatolij Gustschin- Run length encoded BMP image (RLE8) support: CONFIG_VIDEO_BMP_RLE8 1653d5011762SAnatolij Gustschin 1654d5011762SAnatolij Gustschin If this option is set, 8-bit RLE compressed BMP images 1655d5011762SAnatolij Gustschin can be displayed via the splashscreen support or the 1656d5011762SAnatolij Gustschin bmp command. 1657d5011762SAnatolij Gustschin 1658f2b96dfbSLei Wen- Do compresssing for memory range: 1659f2b96dfbSLei Wen CONFIG_CMD_ZIP 1660f2b96dfbSLei Wen 1661f2b96dfbSLei Wen If this option is set, it would use zlib deflate method 1662f2b96dfbSLei Wen to compress the specified memory at its best effort. 1663f2b96dfbSLei Wen 1664c29fdfc1Swdenk- Compression support: 1665c29fdfc1Swdenk CONFIG_BZIP2 1666c29fdfc1Swdenk 1667c29fdfc1Swdenk If this option is set, support for bzip2 compressed 1668c29fdfc1Swdenk images is included. If not, only uncompressed and gzip 1669c29fdfc1Swdenk compressed images are supported. 1670c29fdfc1Swdenk 1671c29fdfc1Swdenk NOTE: the bzip2 algorithm requires a lot of RAM, so 16726d0f6bcfSJean-Christophe PLAGNIOL-VILLARD the malloc area (as defined by CONFIG_SYS_MALLOC_LEN) should 1673c29fdfc1Swdenk be at least 4MB. 1674d791b1dcSwdenk 1675fc9c1727SLuigi 'Comio' Mantellini CONFIG_LZMA 1676fc9c1727SLuigi 'Comio' Mantellini 1677fc9c1727SLuigi 'Comio' Mantellini If this option is set, support for lzma compressed 1678fc9c1727SLuigi 'Comio' Mantellini images is included. 1679fc9c1727SLuigi 'Comio' Mantellini 1680fc9c1727SLuigi 'Comio' Mantellini Note: The LZMA algorithm adds between 2 and 4KB of code and it 1681fc9c1727SLuigi 'Comio' Mantellini requires an amount of dynamic memory that is given by the 1682fc9c1727SLuigi 'Comio' Mantellini formula: 1683fc9c1727SLuigi 'Comio' Mantellini 1684fc9c1727SLuigi 'Comio' Mantellini (1846 + 768 << (lc + lp)) * sizeof(uint16) 1685fc9c1727SLuigi 'Comio' Mantellini 1686fc9c1727SLuigi 'Comio' Mantellini Where lc and lp stand for, respectively, Literal context bits 1687fc9c1727SLuigi 'Comio' Mantellini and Literal pos bits. 1688fc9c1727SLuigi 'Comio' Mantellini 1689fc9c1727SLuigi 'Comio' Mantellini This value is upper-bounded by 14MB in the worst case. Anyway, 1690fc9c1727SLuigi 'Comio' Mantellini for a ~4MB large kernel image, we have lc=3 and lp=0 for a 1691fc9c1727SLuigi 'Comio' Mantellini total amount of (1846 + 768 << (3 + 0)) * 2 = ~41KB... that is 1692fc9c1727SLuigi 'Comio' Mantellini a very small buffer. 1693fc9c1727SLuigi 'Comio' Mantellini 1694fc9c1727SLuigi 'Comio' Mantellini Use the lzmainfo tool to determinate the lc and lp values and 1695fc9c1727SLuigi 'Comio' Mantellini then calculate the amount of needed dynamic memory (ensuring 16966d0f6bcfSJean-Christophe PLAGNIOL-VILLARD the appropriate CONFIG_SYS_MALLOC_LEN value). 1697fc9c1727SLuigi 'Comio' Mantellini 169817ea1177Swdenk- MII/PHY support: 169917ea1177Swdenk CONFIG_PHY_ADDR 170017ea1177Swdenk 170117ea1177Swdenk The address of PHY on MII bus. 170217ea1177Swdenk 170317ea1177Swdenk CONFIG_PHY_CLOCK_FREQ (ppc4xx) 170417ea1177Swdenk 170517ea1177Swdenk The clock frequency of the MII bus 170617ea1177Swdenk 170717ea1177Swdenk CONFIG_PHY_GIGE 170817ea1177Swdenk 170917ea1177Swdenk If this option is set, support for speed/duplex 171011ccc33fSMarcel Ziswiler detection of gigabit PHY is included. 171117ea1177Swdenk 171217ea1177Swdenk CONFIG_PHY_RESET_DELAY 171317ea1177Swdenk 171417ea1177Swdenk Some PHY like Intel LXT971A need extra delay after 171517ea1177Swdenk reset before any MII register access is possible. 171617ea1177Swdenk For such PHY, set this option to the usec delay 171717ea1177Swdenk required. (minimum 300usec for LXT971A) 171817ea1177Swdenk 171917ea1177Swdenk CONFIG_PHY_CMD_DELAY (ppc4xx) 172017ea1177Swdenk 172117ea1177Swdenk Some PHY like Intel LXT971A need extra delay after 172217ea1177Swdenk command issued before MII status register can be read 172317ea1177Swdenk 1724c609719bSwdenk- Ethernet address: 1725c609719bSwdenk CONFIG_ETHADDR 1726c68a05feSrichardretanubun CONFIG_ETH1ADDR 1727c609719bSwdenk CONFIG_ETH2ADDR 1728c609719bSwdenk CONFIG_ETH3ADDR 1729c68a05feSrichardretanubun CONFIG_ETH4ADDR 1730c68a05feSrichardretanubun CONFIG_ETH5ADDR 1731c609719bSwdenk 173211ccc33fSMarcel Ziswiler Define a default value for Ethernet address to use 173311ccc33fSMarcel Ziswiler for the respective Ethernet interface, in case this 1734c609719bSwdenk is not determined automatically. 1735c609719bSwdenk 1736c609719bSwdenk- IP address: 1737c609719bSwdenk CONFIG_IPADDR 1738c609719bSwdenk 1739c609719bSwdenk Define a default value for the IP address to use for 174011ccc33fSMarcel Ziswiler the default Ethernet interface, in case this is not 1741c609719bSwdenk determined through e.g. bootp. 17421ebcd654SWolfgang Denk (Environment variable "ipaddr") 1743c609719bSwdenk 1744c609719bSwdenk- Server IP address: 1745c609719bSwdenk CONFIG_SERVERIP 1746c609719bSwdenk 1747c609719bSwdenk Defines a default value for the IP address of a TFTP 1748c609719bSwdenk server to contact when using the "tftboot" command. 17491ebcd654SWolfgang Denk (Environment variable "serverip") 1750c609719bSwdenk 175197cfe861SRobin Getz CONFIG_KEEP_SERVERADDR 175297cfe861SRobin Getz 175397cfe861SRobin Getz Keeps the server's MAC address, in the env 'serveraddr' 175497cfe861SRobin Getz for passing to bootargs (like Linux's netconsole option) 175597cfe861SRobin Getz 17561ebcd654SWolfgang Denk- Gateway IP address: 17571ebcd654SWolfgang Denk CONFIG_GATEWAYIP 17581ebcd654SWolfgang Denk 17591ebcd654SWolfgang Denk Defines a default value for the IP address of the 17601ebcd654SWolfgang Denk default router where packets to other networks are 17611ebcd654SWolfgang Denk sent to. 17621ebcd654SWolfgang Denk (Environment variable "gatewayip") 17631ebcd654SWolfgang Denk 17641ebcd654SWolfgang Denk- Subnet mask: 17651ebcd654SWolfgang Denk CONFIG_NETMASK 17661ebcd654SWolfgang Denk 17671ebcd654SWolfgang Denk Defines a default value for the subnet mask (or 17681ebcd654SWolfgang Denk routing prefix) which is used to determine if an IP 17691ebcd654SWolfgang Denk address belongs to the local subnet or needs to be 17701ebcd654SWolfgang Denk forwarded through a router. 17711ebcd654SWolfgang Denk (Environment variable "netmask") 17721ebcd654SWolfgang Denk 177353a5c424SDavid Updegraff- Multicast TFTP Mode: 177453a5c424SDavid Updegraff CONFIG_MCAST_TFTP 177553a5c424SDavid Updegraff 177653a5c424SDavid Updegraff Defines whether you want to support multicast TFTP as per 177753a5c424SDavid Updegraff rfc-2090; for example to work with atftp. Lets lots of targets 177811ccc33fSMarcel Ziswiler tftp down the same boot image concurrently. Note: the Ethernet 177953a5c424SDavid Updegraff driver in use must provide a function: mcast() to join/leave a 178053a5c424SDavid Updegraff multicast group. 178153a5c424SDavid Updegraff 1782c609719bSwdenk- BOOTP Recovery Mode: 1783c609719bSwdenk CONFIG_BOOTP_RANDOM_DELAY 1784c609719bSwdenk 1785c609719bSwdenk If you have many targets in a network that try to 1786c609719bSwdenk boot using BOOTP, you may want to avoid that all 1787c609719bSwdenk systems send out BOOTP requests at precisely the same 1788c609719bSwdenk moment (which would happen for instance at recovery 1789c609719bSwdenk from a power failure, when all systems will try to 1790c609719bSwdenk boot, thus flooding the BOOTP server. Defining 1791c609719bSwdenk CONFIG_BOOTP_RANDOM_DELAY causes a random delay to be 1792c609719bSwdenk inserted before sending out BOOTP requests. The 17936c33c785SWolfgang Denk following delays are inserted then: 1794c609719bSwdenk 1795c609719bSwdenk 1st BOOTP request: delay 0 ... 1 sec 1796c609719bSwdenk 2nd BOOTP request: delay 0 ... 2 sec 1797c609719bSwdenk 3rd BOOTP request: delay 0 ... 4 sec 1798c609719bSwdenk 4th and following 1799c609719bSwdenk BOOTP requests: delay 0 ... 8 sec 1800c609719bSwdenk 1801fe389a82Sstroese- DHCP Advanced Options: 18021fe80d79SJon Loeliger You can fine tune the DHCP functionality by defining 18031fe80d79SJon Loeliger CONFIG_BOOTP_* symbols: 1804fe389a82Sstroese 18051fe80d79SJon Loeliger CONFIG_BOOTP_SUBNETMASK 18061fe80d79SJon Loeliger CONFIG_BOOTP_GATEWAY 18071fe80d79SJon Loeliger CONFIG_BOOTP_HOSTNAME 18081fe80d79SJon Loeliger CONFIG_BOOTP_NISDOMAIN 18091fe80d79SJon Loeliger CONFIG_BOOTP_BOOTPATH 18101fe80d79SJon Loeliger CONFIG_BOOTP_BOOTFILESIZE 18111fe80d79SJon Loeliger CONFIG_BOOTP_DNS 18121fe80d79SJon Loeliger CONFIG_BOOTP_DNS2 18131fe80d79SJon Loeliger CONFIG_BOOTP_SEND_HOSTNAME 18141fe80d79SJon Loeliger CONFIG_BOOTP_NTPSERVER 18151fe80d79SJon Loeliger CONFIG_BOOTP_TIMEOFFSET 18161fe80d79SJon Loeliger CONFIG_BOOTP_VENDOREX 18172c00e099SJoe Hershberger CONFIG_BOOTP_MAY_FAIL 1818fe389a82Sstroese 18195d110f0aSWilson Callan CONFIG_BOOTP_SERVERIP - TFTP server will be the serverip 18205d110f0aSWilson Callan environment variable, not the BOOTP server. 1821fe389a82Sstroese 18222c00e099SJoe Hershberger CONFIG_BOOTP_MAY_FAIL - If the DHCP server is not found 18232c00e099SJoe Hershberger after the configured retry count, the call will fail 18242c00e099SJoe Hershberger instead of starting over. This can be used to fail over 18252c00e099SJoe Hershberger to Link-local IP address configuration if the DHCP server 18262c00e099SJoe Hershberger is not available. 18272c00e099SJoe Hershberger 1828fe389a82Sstroese CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS 1829fe389a82Sstroese serverip from a DHCP server, it is possible that more 1830fe389a82Sstroese than one DNS serverip is offered to the client. 1831fe389a82Sstroese If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS 1832fe389a82Sstroese serverip will be stored in the additional environment 1833fe389a82Sstroese variable "dnsip2". The first DNS serverip is always 1834fe389a82Sstroese stored in the variable "dnsip", when CONFIG_BOOTP_DNS 18351fe80d79SJon Loeliger is defined. 1836fe389a82Sstroese 1837fe389a82Sstroese CONFIG_BOOTP_SEND_HOSTNAME - Some DHCP servers are capable 1838fe389a82Sstroese to do a dynamic update of a DNS server. To do this, they 1839fe389a82Sstroese need the hostname of the DHCP requester. 18405d110f0aSWilson Callan If CONFIG_BOOTP_SEND_HOSTNAME is defined, the content 18411fe80d79SJon Loeliger of the "hostname" environment variable is passed as 18421fe80d79SJon Loeliger option 12 to the DHCP server. 1843fe389a82Sstroese 1844d9a2f416SAras Vaichas CONFIG_BOOTP_DHCP_REQUEST_DELAY 1845d9a2f416SAras Vaichas 1846d9a2f416SAras Vaichas A 32bit value in microseconds for a delay between 1847d9a2f416SAras Vaichas receiving a "DHCP Offer" and sending the "DHCP Request". 1848d9a2f416SAras Vaichas This fixes a problem with certain DHCP servers that don't 1849d9a2f416SAras Vaichas respond 100% of the time to a "DHCP request". E.g. On an 1850d9a2f416SAras Vaichas AT91RM9200 processor running at 180MHz, this delay needed 1851d9a2f416SAras Vaichas to be *at least* 15,000 usec before a Windows Server 2003 1852d9a2f416SAras Vaichas DHCP server would reply 100% of the time. I recommend at 1853d9a2f416SAras Vaichas least 50,000 usec to be safe. The alternative is to hope 1854d9a2f416SAras Vaichas that one of the retries will be successful but note that 1855d9a2f416SAras Vaichas the DHCP timeout and retry process takes a longer than 1856d9a2f416SAras Vaichas this delay. 1857d9a2f416SAras Vaichas 1858d22c338eSJoe Hershberger - Link-local IP address negotiation: 1859d22c338eSJoe Hershberger Negotiate with other link-local clients on the local network 1860d22c338eSJoe Hershberger for an address that doesn't require explicit configuration. 1861d22c338eSJoe Hershberger This is especially useful if a DHCP server cannot be guaranteed 1862d22c338eSJoe Hershberger to exist in all environments that the device must operate. 1863d22c338eSJoe Hershberger 1864d22c338eSJoe Hershberger See doc/README.link-local for more information. 1865d22c338eSJoe Hershberger 1866a3d991bdSwdenk - CDP Options: 1867a3d991bdSwdenk CONFIG_CDP_DEVICE_ID 1868a3d991bdSwdenk 1869a3d991bdSwdenk The device id used in CDP trigger frames. 1870a3d991bdSwdenk 1871a3d991bdSwdenk CONFIG_CDP_DEVICE_ID_PREFIX 1872a3d991bdSwdenk 1873a3d991bdSwdenk A two character string which is prefixed to the MAC address 1874a3d991bdSwdenk of the device. 1875a3d991bdSwdenk 1876a3d991bdSwdenk CONFIG_CDP_PORT_ID 1877a3d991bdSwdenk 1878a3d991bdSwdenk A printf format string which contains the ascii name of 1879a3d991bdSwdenk the port. Normally is set to "eth%d" which sets 188011ccc33fSMarcel Ziswiler eth0 for the first Ethernet, eth1 for the second etc. 1881a3d991bdSwdenk 1882a3d991bdSwdenk CONFIG_CDP_CAPABILITIES 1883a3d991bdSwdenk 1884a3d991bdSwdenk A 32bit integer which indicates the device capabilities; 1885a3d991bdSwdenk 0x00000010 for a normal host which does not forwards. 1886a3d991bdSwdenk 1887a3d991bdSwdenk CONFIG_CDP_VERSION 1888a3d991bdSwdenk 1889a3d991bdSwdenk An ascii string containing the version of the software. 1890a3d991bdSwdenk 1891a3d991bdSwdenk CONFIG_CDP_PLATFORM 1892a3d991bdSwdenk 1893a3d991bdSwdenk An ascii string containing the name of the platform. 1894a3d991bdSwdenk 1895a3d991bdSwdenk CONFIG_CDP_TRIGGER 1896a3d991bdSwdenk 1897a3d991bdSwdenk A 32bit integer sent on the trigger. 1898a3d991bdSwdenk 1899a3d991bdSwdenk CONFIG_CDP_POWER_CONSUMPTION 1900a3d991bdSwdenk 1901a3d991bdSwdenk A 16bit integer containing the power consumption of the 1902a3d991bdSwdenk device in .1 of milliwatts. 1903a3d991bdSwdenk 1904a3d991bdSwdenk CONFIG_CDP_APPLIANCE_VLAN_TYPE 1905a3d991bdSwdenk 1906a3d991bdSwdenk A byte containing the id of the VLAN. 1907a3d991bdSwdenk 1908c609719bSwdenk- Status LED: CONFIG_STATUS_LED 1909c609719bSwdenk 1910c609719bSwdenk Several configurations allow to display the current 1911c609719bSwdenk status using a LED. For instance, the LED will blink 1912c609719bSwdenk fast while running U-Boot code, stop blinking as 1913c609719bSwdenk soon as a reply to a BOOTP request was received, and 1914c609719bSwdenk start blinking slow once the Linux kernel is running 1915c609719bSwdenk (supported by a status LED driver in the Linux 1916c609719bSwdenk kernel). Defining CONFIG_STATUS_LED enables this 1917c609719bSwdenk feature in U-Boot. 1918c609719bSwdenk 1919c609719bSwdenk- CAN Support: CONFIG_CAN_DRIVER 1920c609719bSwdenk 1921c609719bSwdenk Defining CONFIG_CAN_DRIVER enables CAN driver support 1922c609719bSwdenk on those systems that support this (optional) 1923c609719bSwdenk feature, like the TQM8xxL modules. 1924c609719bSwdenk 1925c609719bSwdenk- I2C Support: CONFIG_HARD_I2C | CONFIG_SOFT_I2C 1926c609719bSwdenk 1927b37c7e5eSwdenk These enable I2C serial bus commands. Defining either of 1928b37c7e5eSwdenk (but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will 192911ccc33fSMarcel Ziswiler include the appropriate I2C driver for the selected CPU. 1930c609719bSwdenk 1931b37c7e5eSwdenk This will allow you to use i2c commands at the u-boot 1932602ad3b3SJon Loeliger command line (as long as you set CONFIG_CMD_I2C in 1933b37c7e5eSwdenk CONFIG_COMMANDS) and communicate with i2c based realtime 1934b37c7e5eSwdenk clock chips. See common/cmd_i2c.c for a description of the 1935c609719bSwdenk command line interface. 1936c609719bSwdenk 1937bb99ad6dSBen Warren CONFIG_HARD_I2C selects a hardware I2C controller. 1938c609719bSwdenk 1939b37c7e5eSwdenk CONFIG_SOFT_I2C configures u-boot to use a software (aka 1940b37c7e5eSwdenk bit-banging) driver instead of CPM or similar hardware 1941b37c7e5eSwdenk support for I2C. 1942c609719bSwdenk 1943b37c7e5eSwdenk There are several other quantities that must also be 1944b37c7e5eSwdenk defined when you define CONFIG_HARD_I2C or CONFIG_SOFT_I2C. 1945c609719bSwdenk 19466d0f6bcfSJean-Christophe PLAGNIOL-VILLARD In both cases you will need to define CONFIG_SYS_I2C_SPEED 1947b37c7e5eSwdenk to be the frequency (in Hz) at which you wish your i2c bus 19486d0f6bcfSJean-Christophe PLAGNIOL-VILLARD to run and CONFIG_SYS_I2C_SLAVE to be the address of this node (ie 194911ccc33fSMarcel Ziswiler the CPU's i2c node address). 1950c609719bSwdenk 19518d321b81SPeter Tyser Now, the u-boot i2c code for the mpc8xx 1952a47a12beSStefan Roese (arch/powerpc/cpu/mpc8xx/i2c.c) sets the CPU up as a master node 19538d321b81SPeter Tyser and so its address should therefore be cleared to 0 (See, 19548d321b81SPeter Tyser eg, MPC823e User's Manual p.16-473). So, set 19558d321b81SPeter Tyser CONFIG_SYS_I2C_SLAVE to 0. 1956b37c7e5eSwdenk 19575da71efaSEric Millbrandt CONFIG_SYS_I2C_INIT_MPC5XXX 19585da71efaSEric Millbrandt 19595da71efaSEric Millbrandt When a board is reset during an i2c bus transfer 19605da71efaSEric Millbrandt chips might think that the current transfer is still 19615da71efaSEric Millbrandt in progress. Reset the slave devices by sending start 19625da71efaSEric Millbrandt commands until the slave device responds. 19635da71efaSEric Millbrandt 1964b37c7e5eSwdenk That's all that's required for CONFIG_HARD_I2C. 1965b37c7e5eSwdenk 1966b37c7e5eSwdenk If you use the software i2c interface (CONFIG_SOFT_I2C) 1967b37c7e5eSwdenk then the following macros need to be defined (examples are 1968b37c7e5eSwdenk from include/configs/lwmon.h): 1969c609719bSwdenk 1970c609719bSwdenk I2C_INIT 1971c609719bSwdenk 1972b37c7e5eSwdenk (Optional). Any commands necessary to enable the I2C 1973c609719bSwdenk controller or configure ports. 1974c609719bSwdenk 1975b37c7e5eSwdenk eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) 1976b37c7e5eSwdenk 1977c609719bSwdenk I2C_PORT 1978c609719bSwdenk 1979c609719bSwdenk (Only for MPC8260 CPU). The I/O port to use (the code 1980c609719bSwdenk assumes both bits are on the same port). Valid values 1981c609719bSwdenk are 0..3 for ports A..D. 1982c609719bSwdenk 1983c609719bSwdenk I2C_ACTIVE 1984c609719bSwdenk 1985c609719bSwdenk The code necessary to make the I2C data line active 1986c609719bSwdenk (driven). If the data line is open collector, this 1987c609719bSwdenk define can be null. 1988c609719bSwdenk 1989b37c7e5eSwdenk eg: #define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) 1990b37c7e5eSwdenk 1991c609719bSwdenk I2C_TRISTATE 1992c609719bSwdenk 1993c609719bSwdenk The code necessary to make the I2C data line tri-stated 1994c609719bSwdenk (inactive). If the data line is open collector, this 1995c609719bSwdenk define can be null. 1996c609719bSwdenk 1997b37c7e5eSwdenk eg: #define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) 1998b37c7e5eSwdenk 1999c609719bSwdenk I2C_READ 2000c609719bSwdenk 2001472d5460SYork Sun Code that returns true if the I2C data line is high, 2002472d5460SYork Sun false if it is low. 2003c609719bSwdenk 2004b37c7e5eSwdenk eg: #define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) 2005b37c7e5eSwdenk 2006c609719bSwdenk I2C_SDA(bit) 2007c609719bSwdenk 2008472d5460SYork Sun If <bit> is true, sets the I2C data line high. If it 2009472d5460SYork Sun is false, it clears it (low). 2010c609719bSwdenk 2011b37c7e5eSwdenk eg: #define I2C_SDA(bit) \ 2012b37c7e5eSwdenk if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ 2013b37c7e5eSwdenk else immr->im_cpm.cp_pbdat &= ~PB_SDA 2014b37c7e5eSwdenk 2015c609719bSwdenk I2C_SCL(bit) 2016c609719bSwdenk 2017472d5460SYork Sun If <bit> is true, sets the I2C clock line high. If it 2018472d5460SYork Sun is false, it clears it (low). 2019c609719bSwdenk 2020b37c7e5eSwdenk eg: #define I2C_SCL(bit) \ 2021b37c7e5eSwdenk if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ 2022b37c7e5eSwdenk else immr->im_cpm.cp_pbdat &= ~PB_SCL 2023b37c7e5eSwdenk 2024c609719bSwdenk I2C_DELAY 2025c609719bSwdenk 2026c609719bSwdenk This delay is invoked four times per clock cycle so this 2027c609719bSwdenk controls the rate of data transfer. The data rate thus 2028b37c7e5eSwdenk is 1 / (I2C_DELAY * 4). Often defined to be something 2029b37c7e5eSwdenk like: 2030b37c7e5eSwdenk 2031b37c7e5eSwdenk #define I2C_DELAY udelay(2) 2032c609719bSwdenk 2033793b5726SMike Frysinger CONFIG_SOFT_I2C_GPIO_SCL / CONFIG_SOFT_I2C_GPIO_SDA 2034793b5726SMike Frysinger 2035793b5726SMike Frysinger If your arch supports the generic GPIO framework (asm/gpio.h), 2036793b5726SMike Frysinger then you may alternatively define the two GPIOs that are to be 2037793b5726SMike Frysinger used as SCL / SDA. Any of the previous I2C_xxx macros will 2038793b5726SMike Frysinger have GPIO-based defaults assigned to them as appropriate. 2039793b5726SMike Frysinger 2040793b5726SMike Frysinger You should define these to the GPIO value as given directly to 2041793b5726SMike Frysinger the generic GPIO functions. 2042793b5726SMike Frysinger 20436d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_I2C_INIT_BOARD 204447cd00faSwdenk 204547cd00faSwdenk When a board is reset during an i2c bus transfer 204647cd00faSwdenk chips might think that the current transfer is still 204747cd00faSwdenk in progress. On some boards it is possible to access 204847cd00faSwdenk the i2c SCLK line directly, either by using the 204947cd00faSwdenk processor pin as a GPIO or by having a second pin 205047cd00faSwdenk connected to the bus. If this option is defined a 205147cd00faSwdenk custom i2c_init_board() routine in boards/xxx/board.c 205247cd00faSwdenk is run early in the boot sequence. 205347cd00faSwdenk 205426a33504SRichard Retanubun CONFIG_SYS_I2C_BOARD_LATE_INIT 205526a33504SRichard Retanubun 205626a33504SRichard Retanubun An alternative to CONFIG_SYS_I2C_INIT_BOARD. If this option is 205726a33504SRichard Retanubun defined a custom i2c_board_late_init() routine in 205826a33504SRichard Retanubun boards/xxx/board.c is run AFTER the operations in i2c_init() 205926a33504SRichard Retanubun is completed. This callpoint can be used to unreset i2c bus 206026a33504SRichard Retanubun using CPU i2c controller register accesses for CPUs whose i2c 206126a33504SRichard Retanubun controller provide such a method. It is called at the end of 206226a33504SRichard Retanubun i2c_init() to allow i2c_init operations to setup the i2c bus 206326a33504SRichard Retanubun controller on the CPU (e.g. setting bus speed & slave address). 206426a33504SRichard Retanubun 206517ea1177Swdenk CONFIG_I2CFAST (PPC405GP|PPC405EP only) 206617ea1177Swdenk 206717ea1177Swdenk This option enables configuration of bi_iic_fast[] flags 206817ea1177Swdenk in u-boot bd_info structure based on u-boot environment 206917ea1177Swdenk variable "i2cfast". (see also i2cfast) 207017ea1177Swdenk 2071bb99ad6dSBen Warren CONFIG_I2C_MULTI_BUS 2072bb99ad6dSBen Warren 2073bb99ad6dSBen Warren This option allows the use of multiple I2C buses, each of which 2074bb99ad6dSBen Warren must have a controller. At any point in time, only one bus is 2075bb99ad6dSBen Warren active. To switch to a different bus, use the 'i2c dev' command. 2076bb99ad6dSBen Warren Note that bus numbering is zero-based. 2077bb99ad6dSBen Warren 20786d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_I2C_NOPROBES 2079bb99ad6dSBen Warren 2080bb99ad6dSBen Warren This option specifies a list of I2C devices that will be skipped 20810f89c54bSPeter Tyser when the 'i2c probe' command is issued. If CONFIG_I2C_MULTI_BUS 20820f89c54bSPeter Tyser is set, specify a list of bus-device pairs. Otherwise, specify 20830f89c54bSPeter Tyser a 1D array of device addresses 2084bb99ad6dSBen Warren 2085bb99ad6dSBen Warren e.g. 2086bb99ad6dSBen Warren #undef CONFIG_I2C_MULTI_BUS 20876d0f6bcfSJean-Christophe PLAGNIOL-VILLARD #define CONFIG_SYS_I2C_NOPROBES {0x50,0x68} 2088bb99ad6dSBen Warren 2089bb99ad6dSBen Warren will skip addresses 0x50 and 0x68 on a board with one I2C bus 2090bb99ad6dSBen Warren 2091bb99ad6dSBen Warren #define CONFIG_I2C_MULTI_BUS 20926d0f6bcfSJean-Christophe PLAGNIOL-VILLARD #define CONFIG_SYS_I2C_MULTI_NOPROBES {{0,0x50},{0,0x68},{1,0x54}} 2093bb99ad6dSBen Warren 2094bb99ad6dSBen Warren will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1 2095bb99ad6dSBen Warren 20966d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SPD_BUS_NUM 2097be5e6181STimur Tabi 2098be5e6181STimur Tabi If defined, then this indicates the I2C bus number for DDR SPD. 2099be5e6181STimur Tabi If not defined, then U-Boot assumes that SPD is on I2C bus 0. 2100be5e6181STimur Tabi 21016d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_RTC_BUS_NUM 21020dc018ecSStefan Roese 21030dc018ecSStefan Roese If defined, then this indicates the I2C bus number for the RTC. 21040dc018ecSStefan Roese If not defined, then U-Boot assumes that RTC is on I2C bus 0. 21050dc018ecSStefan Roese 21066d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_DTT_BUS_NUM 21070dc018ecSStefan Roese 21080dc018ecSStefan Roese If defined, then this indicates the I2C bus number for the DTT. 21090dc018ecSStefan Roese If not defined, then U-Boot assumes that DTT is on I2C bus 0. 21100dc018ecSStefan Roese 21116d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_I2C_DTT_ADDR: 21129ebbb54fSVictor Gallardo 21139ebbb54fSVictor Gallardo If defined, specifies the I2C address of the DTT device. 21149ebbb54fSVictor Gallardo If not defined, then U-Boot uses predefined value for 21159ebbb54fSVictor Gallardo specified DTT device. 21169ebbb54fSVictor Gallardo 2117be5e6181STimur Tabi CONFIG_FSL_I2C 2118be5e6181STimur Tabi 2119be5e6181STimur Tabi Define this option if you want to use Freescale's I2C driver in 21207817cb20SMarcel Ziswiler drivers/i2c/fsl_i2c.c. 2121be5e6181STimur Tabi 212267b23a32SHeiko Schocher CONFIG_I2C_MUX 212367b23a32SHeiko Schocher 212467b23a32SHeiko Schocher Define this option if you have I2C devices reached over 1 .. n 212567b23a32SHeiko Schocher I2C Muxes like the pca9544a. This option addes a new I2C 212667b23a32SHeiko Schocher Command "i2c bus [muxtype:muxaddr:muxchannel]" which adds a 212767b23a32SHeiko Schocher new I2C Bus to the existing I2C Busses. If you select the 212867b23a32SHeiko Schocher new Bus with "i2c dev", u-bbot sends first the commandos for 212967b23a32SHeiko Schocher the muxes to activate this new "bus". 213067b23a32SHeiko Schocher 213167b23a32SHeiko Schocher CONFIG_I2C_MULTI_BUS must be also defined, to use this 213267b23a32SHeiko Schocher feature! 213367b23a32SHeiko Schocher 213467b23a32SHeiko Schocher Example: 213567b23a32SHeiko Schocher Adding a new I2C Bus reached over 2 pca9544a muxes 213667b23a32SHeiko Schocher The First mux with address 70 and channel 6 213767b23a32SHeiko Schocher The Second mux with address 71 and channel 4 213867b23a32SHeiko Schocher 213967b23a32SHeiko Schocher => i2c bus pca9544a:70:6:pca9544a:71:4 214067b23a32SHeiko Schocher 214167b23a32SHeiko Schocher Use the "i2c bus" command without parameter, to get a list 214267b23a32SHeiko Schocher of I2C Busses with muxes: 214367b23a32SHeiko Schocher 214467b23a32SHeiko Schocher => i2c bus 214567b23a32SHeiko Schocher Busses reached over muxes: 214667b23a32SHeiko Schocher Bus ID: 2 214767b23a32SHeiko Schocher reached over Mux(es): 214867b23a32SHeiko Schocher pca9544a@70 ch: 4 214967b23a32SHeiko Schocher Bus ID: 3 215067b23a32SHeiko Schocher reached over Mux(es): 215167b23a32SHeiko Schocher pca9544a@70 ch: 6 215267b23a32SHeiko Schocher pca9544a@71 ch: 4 215367b23a32SHeiko Schocher => 215467b23a32SHeiko Schocher 215567b23a32SHeiko Schocher If you now switch to the new I2C Bus 3 with "i2c dev 3" 2156f9a78b8dSMichael Jones u-boot first sends the command to the mux@70 to enable 2157f9a78b8dSMichael Jones channel 6, and then the command to the mux@71 to enable 215867b23a32SHeiko Schocher the channel 4. 215967b23a32SHeiko Schocher 216067b23a32SHeiko Schocher After that, you can use the "normal" i2c commands as 2161f9a78b8dSMichael Jones usual to communicate with your I2C devices behind 216267b23a32SHeiko Schocher the 2 muxes. 216367b23a32SHeiko Schocher 216467b23a32SHeiko Schocher This option is actually implemented for the bitbanging 216567b23a32SHeiko Schocher algorithm in common/soft_i2c.c and for the Hardware I2C 216667b23a32SHeiko Schocher Bus on the MPC8260. But it should be not so difficult 216767b23a32SHeiko Schocher to add this option to other architectures. 216867b23a32SHeiko Schocher 21692ac6985aSAndrew Dyer CONFIG_SOFT_I2C_READ_REPEATED_START 21702ac6985aSAndrew Dyer 21712ac6985aSAndrew Dyer defining this will force the i2c_read() function in 21722ac6985aSAndrew Dyer the soft_i2c driver to perform an I2C repeated start 21732ac6985aSAndrew Dyer between writing the address pointer and reading the 21742ac6985aSAndrew Dyer data. If this define is omitted the default behaviour 21752ac6985aSAndrew Dyer of doing a stop-start sequence will be used. Most I2C 21762ac6985aSAndrew Dyer devices can use either method, but some require one or 21772ac6985aSAndrew Dyer the other. 2178be5e6181STimur Tabi 2179c609719bSwdenk- SPI Support: CONFIG_SPI 2180c609719bSwdenk 2181c609719bSwdenk Enables SPI driver (so far only tested with 2182c609719bSwdenk SPI EEPROM, also an instance works with Crystal A/D and 2183c609719bSwdenk D/As on the SACSng board) 2184c609719bSwdenk 21856639562eSYoshihiro Shimoda CONFIG_SH_SPI 21866639562eSYoshihiro Shimoda 21876639562eSYoshihiro Shimoda Enables the driver for SPI controller on SuperH. Currently 21886639562eSYoshihiro Shimoda only SH7757 is supported. 21896639562eSYoshihiro Shimoda 2190c609719bSwdenk CONFIG_SPI_X 2191c609719bSwdenk 2192c609719bSwdenk Enables extended (16-bit) SPI EEPROM addressing. 2193c609719bSwdenk (symmetrical to CONFIG_I2C_X) 2194c609719bSwdenk 2195c609719bSwdenk CONFIG_SOFT_SPI 2196c609719bSwdenk 2197c609719bSwdenk Enables a software (bit-bang) SPI driver rather than 2198c609719bSwdenk using hardware support. This is a general purpose 2199c609719bSwdenk driver that only requires three general I/O port pins 2200c609719bSwdenk (two outputs, one input) to function. If this is 2201c609719bSwdenk defined, the board configuration must define several 2202c609719bSwdenk SPI configuration items (port pins to use, etc). For 2203c609719bSwdenk an example, see include/configs/sacsng.h. 2204c609719bSwdenk 220504a9e118SBen Warren CONFIG_HARD_SPI 220604a9e118SBen Warren 220704a9e118SBen Warren Enables a hardware SPI driver for general-purpose reads 220804a9e118SBen Warren and writes. As with CONFIG_SOFT_SPI, the board configuration 220904a9e118SBen Warren must define a list of chip-select function pointers. 221004a9e118SBen Warren Currently supported on some MPC8xxx processors. For an 221104a9e118SBen Warren example, see include/configs/mpc8349emds.h. 221204a9e118SBen Warren 221338254f45SGuennadi Liakhovetski CONFIG_MXC_SPI 221438254f45SGuennadi Liakhovetski 221538254f45SGuennadi Liakhovetski Enables the driver for the SPI controllers on i.MX and MXC 22162e3cd1cdSFabio Estevam SoCs. Currently i.MX31/35/51 are supported. 221738254f45SGuennadi Liakhovetski 22180133502eSMatthias Fuchs- FPGA Support: CONFIG_FPGA 22190133502eSMatthias Fuchs 22200133502eSMatthias Fuchs Enables FPGA subsystem. 22210133502eSMatthias Fuchs 22220133502eSMatthias Fuchs CONFIG_FPGA_<vendor> 22230133502eSMatthias Fuchs 22240133502eSMatthias Fuchs Enables support for specific chip vendors. 22250133502eSMatthias Fuchs (ALTERA, XILINX) 22260133502eSMatthias Fuchs 22270133502eSMatthias Fuchs CONFIG_FPGA_<family> 22280133502eSMatthias Fuchs 22290133502eSMatthias Fuchs Enables support for FPGA family. 22300133502eSMatthias Fuchs (SPARTAN2, SPARTAN3, VIRTEX2, CYCLONE2, ACEX1K, ACEX) 22310133502eSMatthias Fuchs 22320133502eSMatthias Fuchs CONFIG_FPGA_COUNT 2233c609719bSwdenk 2234c609719bSwdenk Specify the number of FPGA devices to support. 2235c609719bSwdenk 22366d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_PROG_FEEDBACK 2237c609719bSwdenk 2238c609719bSwdenk Enable printing of hash marks during FPGA configuration. 2239c609719bSwdenk 22406d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_CHECK_BUSY 2241c609719bSwdenk 2242c609719bSwdenk Enable checks on FPGA configuration interface busy 2243c609719bSwdenk status by the configuration function. This option 2244c609719bSwdenk will require a board or device specific function to 2245c609719bSwdenk be written. 2246c609719bSwdenk 2247c609719bSwdenk CONFIG_FPGA_DELAY 2248c609719bSwdenk 2249c609719bSwdenk If defined, a function that provides delays in the FPGA 2250c609719bSwdenk configuration driver. 2251c609719bSwdenk 22526d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_CHECK_CTRLC 2253c609719bSwdenk Allow Control-C to interrupt FPGA configuration 2254c609719bSwdenk 22556d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_CHECK_ERROR 2256c609719bSwdenk 2257c609719bSwdenk Check for configuration errors during FPGA bitfile 2258c609719bSwdenk loading. For example, abort during Virtex II 2259c609719bSwdenk configuration if the INIT_B line goes low (which 2260c609719bSwdenk indicated a CRC error). 2261c609719bSwdenk 22626d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_WAIT_INIT 2263c609719bSwdenk 2264c609719bSwdenk Maximum time to wait for the INIT_B line to deassert 2265c609719bSwdenk after PROB_B has been deasserted during a Virtex II 2266c609719bSwdenk FPGA configuration sequence. The default time is 500 226711ccc33fSMarcel Ziswiler ms. 2268c609719bSwdenk 22696d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_WAIT_BUSY 2270c609719bSwdenk 2271c609719bSwdenk Maximum time to wait for BUSY to deassert during 227211ccc33fSMarcel Ziswiler Virtex II FPGA configuration. The default is 5 ms. 2273c609719bSwdenk 22746d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_WAIT_CONFIG 2275c609719bSwdenk 2276c609719bSwdenk Time to wait after FPGA configuration. The default is 227711ccc33fSMarcel Ziswiler 200 ms. 2278c609719bSwdenk 2279c609719bSwdenk- Configuration Management: 2280c609719bSwdenk CONFIG_IDENT_STRING 2281c609719bSwdenk 2282c609719bSwdenk If defined, this string will be added to the U-Boot 2283c609719bSwdenk version information (U_BOOT_VERSION) 2284c609719bSwdenk 2285c609719bSwdenk- Vendor Parameter Protection: 2286c609719bSwdenk 2287c609719bSwdenk U-Boot considers the values of the environment 2288c609719bSwdenk variables "serial#" (Board Serial Number) and 22897152b1d0Swdenk "ethaddr" (Ethernet Address) to be parameters that 2290c609719bSwdenk are set once by the board vendor / manufacturer, and 2291c609719bSwdenk protects these variables from casual modification by 2292c609719bSwdenk the user. Once set, these variables are read-only, 2293c609719bSwdenk and write or delete attempts are rejected. You can 229411ccc33fSMarcel Ziswiler change this behaviour: 2295c609719bSwdenk 2296c609719bSwdenk If CONFIG_ENV_OVERWRITE is #defined in your config 2297c609719bSwdenk file, the write protection for vendor parameters is 229847cd00faSwdenk completely disabled. Anybody can change or delete 2299c609719bSwdenk these parameters. 2300c609719bSwdenk 2301c609719bSwdenk Alternatively, if you #define _both_ CONFIG_ETHADDR 2302c609719bSwdenk _and_ CONFIG_OVERWRITE_ETHADDR_ONCE, a default 230311ccc33fSMarcel Ziswiler Ethernet address is installed in the environment, 2304c609719bSwdenk which can be changed exactly ONCE by the user. [The 2305c609719bSwdenk serial# is unaffected by this, i. e. it remains 2306c609719bSwdenk read-only.] 2307c609719bSwdenk 23082598090bSJoe Hershberger The same can be accomplished in a more flexible way 23092598090bSJoe Hershberger for any variable by configuring the type of access 23102598090bSJoe Hershberger to allow for those variables in the ".flags" variable 23112598090bSJoe Hershberger or define CONFIG_ENV_FLAGS_LIST_STATIC. 23122598090bSJoe Hershberger 2313c609719bSwdenk- Protected RAM: 2314c609719bSwdenk CONFIG_PRAM 2315c609719bSwdenk 2316c609719bSwdenk Define this variable to enable the reservation of 2317c609719bSwdenk "protected RAM", i. e. RAM which is not overwritten 2318c609719bSwdenk by U-Boot. Define CONFIG_PRAM to hold the number of 2319c609719bSwdenk kB you want to reserve for pRAM. You can overwrite 2320c609719bSwdenk this default value by defining an environment 2321c609719bSwdenk variable "pram" to the number of kB you want to 2322c609719bSwdenk reserve. Note that the board info structure will 2323c609719bSwdenk still show the full amount of RAM. If pRAM is 2324c609719bSwdenk reserved, a new environment variable "mem" will 2325c609719bSwdenk automatically be defined to hold the amount of 2326c609719bSwdenk remaining RAM in a form that can be passed as boot 2327c609719bSwdenk argument to Linux, for instance like that: 2328c609719bSwdenk 2329fe126d8bSWolfgang Denk setenv bootargs ... mem=\${mem} 2330c609719bSwdenk saveenv 2331c609719bSwdenk 2332c609719bSwdenk This way you can tell Linux not to use this memory, 2333c609719bSwdenk either, which results in a memory region that will 2334c609719bSwdenk not be affected by reboots. 2335c609719bSwdenk 2336c609719bSwdenk *WARNING* If your board configuration uses automatic 2337c609719bSwdenk detection of the RAM size, you must make sure that 2338c609719bSwdenk this memory test is non-destructive. So far, the 2339c609719bSwdenk following board configurations are known to be 2340c609719bSwdenk "pRAM-clean": 2341c609719bSwdenk 23421b0757ecSWolfgang Denk IVMS8, IVML24, SPD8xx, TQM8xxL, 23431b0757ecSWolfgang Denk HERMES, IP860, RPXlite, LWMON, 2344544d97e9SWolfgang Denk FLAGADM, TQM8260 2345c609719bSwdenk 234640fef049SGabe Black- Access to physical memory region (> 4GB) 234740fef049SGabe Black Some basic support is provided for operations on memory not 234840fef049SGabe Black normally accessible to U-Boot - e.g. some architectures 234940fef049SGabe Black support access to more than 4GB of memory on 32-bit 235040fef049SGabe Black machines using physical address extension or similar. 235140fef049SGabe Black Define CONFIG_PHYSMEM to access this basic support, which 235240fef049SGabe Black currently only supports clearing the memory. 235340fef049SGabe Black 2354c609719bSwdenk- Error Recovery: 2355c609719bSwdenk CONFIG_PANIC_HANG 2356c609719bSwdenk 2357c609719bSwdenk Define this variable to stop the system in case of a 2358c609719bSwdenk fatal error, so that you have to reset it manually. 2359c609719bSwdenk This is probably NOT a good idea for an embedded 236011ccc33fSMarcel Ziswiler system where you want the system to reboot 2361c609719bSwdenk automatically as fast as possible, but it may be 2362c609719bSwdenk useful during development since you can try to debug 2363c609719bSwdenk the conditions that lead to the situation. 2364c609719bSwdenk 2365c609719bSwdenk CONFIG_NET_RETRY_COUNT 2366c609719bSwdenk 2367c609719bSwdenk This variable defines the number of retries for 2368c609719bSwdenk network operations like ARP, RARP, TFTP, or BOOTP 2369c609719bSwdenk before giving up the operation. If not defined, a 2370c609719bSwdenk default value of 5 is used. 2371c609719bSwdenk 237240cb90eeSGuennadi Liakhovetski CONFIG_ARP_TIMEOUT 237340cb90eeSGuennadi Liakhovetski 237440cb90eeSGuennadi Liakhovetski Timeout waiting for an ARP reply in milliseconds. 237540cb90eeSGuennadi Liakhovetski 237648a3e999STetsuyuki Kobayashi CONFIG_NFS_TIMEOUT 237748a3e999STetsuyuki Kobayashi 237848a3e999STetsuyuki Kobayashi Timeout in milliseconds used in NFS protocol. 237948a3e999STetsuyuki Kobayashi If you encounter "ERROR: Cannot umount" in nfs command, 238048a3e999STetsuyuki Kobayashi try longer timeout such as 238148a3e999STetsuyuki Kobayashi #define CONFIG_NFS_TIMEOUT 10000UL 238248a3e999STetsuyuki Kobayashi 2383c609719bSwdenk- Command Interpreter: 23848078f1a5SWolfgang Denk CONFIG_AUTO_COMPLETE 238504a85b3bSwdenk 238604a85b3bSwdenk Enable auto completion of commands using TAB. 238704a85b3bSwdenk 23888078f1a5SWolfgang Denk Note that this feature has NOT been implemented yet 23898078f1a5SWolfgang Denk for the "hush" shell. 23908078f1a5SWolfgang Denk 23918078f1a5SWolfgang Denk 23926d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_HUSH_PARSER 2393c609719bSwdenk 2394c609719bSwdenk Define this variable to enable the "hush" shell (from 2395c609719bSwdenk Busybox) as command line interpreter, thus enabling 2396c609719bSwdenk powerful command line syntax like 2397c609719bSwdenk if...then...else...fi conditionals or `&&' and '||' 2398c609719bSwdenk constructs ("shell scripts"). 2399c609719bSwdenk 2400c609719bSwdenk If undefined, you get the old, much simpler behaviour 2401c609719bSwdenk with a somewhat smaller memory footprint. 2402c609719bSwdenk 2403c609719bSwdenk 24046d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PROMPT_HUSH_PS2 2405c609719bSwdenk 2406c609719bSwdenk This defines the secondary prompt string, which is 2407c609719bSwdenk printed when the command interpreter needs more input 2408c609719bSwdenk to complete a command. Usually "> ". 2409c609719bSwdenk 2410c609719bSwdenk Note: 2411c609719bSwdenk 2412c609719bSwdenk In the current implementation, the local variables 2413c609719bSwdenk space and global environment variables space are 2414c609719bSwdenk separated. Local variables are those you define by 24153b57fe0aSwdenk simply typing `name=value'. To access a local 2416c609719bSwdenk variable later on, you have write `$name' or 24173b57fe0aSwdenk `${name}'; to execute the contents of a variable 24183b57fe0aSwdenk directly type `$name' at the command prompt. 2419c609719bSwdenk 2420c609719bSwdenk Global environment variables are those you use 2421c609719bSwdenk setenv/printenv to work with. To run a command stored 2422c609719bSwdenk in such a variable, you need to use the run command, 2423c609719bSwdenk and you must not use the '$' sign to access them. 2424c609719bSwdenk 2425c609719bSwdenk To store commands and special characters in a 2426c609719bSwdenk variable, please use double quotation marks 2427c609719bSwdenk surrounding the whole text of the variable, instead 2428c609719bSwdenk of the backslashes before semicolons and special 2429c609719bSwdenk symbols. 2430c609719bSwdenk 2431aa0c71acSWolfgang Denk- Commandline Editing and History: 2432aa0c71acSWolfgang Denk CONFIG_CMDLINE_EDITING 2433aa0c71acSWolfgang Denk 243411ccc33fSMarcel Ziswiler Enable editing and History functions for interactive 2435aa0c71acSWolfgang Denk commandline input operations 2436aa0c71acSWolfgang Denk 2437a8c7c708Swdenk- Default Environment: 2438c609719bSwdenk CONFIG_EXTRA_ENV_SETTINGS 2439c609719bSwdenk 2440c609719bSwdenk Define this to contain any number of null terminated 2441c609719bSwdenk strings (variable = value pairs) that will be part of 24427152b1d0Swdenk the default environment compiled into the boot image. 24432262cfeeSwdenk 2444c609719bSwdenk For example, place something like this in your 2445c609719bSwdenk board's config file: 2446c609719bSwdenk 2447c609719bSwdenk #define CONFIG_EXTRA_ENV_SETTINGS \ 2448c609719bSwdenk "myvar1=value1\0" \ 2449c609719bSwdenk "myvar2=value2\0" 2450c609719bSwdenk 2451c609719bSwdenk Warning: This method is based on knowledge about the 2452c609719bSwdenk internal format how the environment is stored by the 24532262cfeeSwdenk U-Boot code. This is NOT an official, exported 2454c609719bSwdenk interface! Although it is unlikely that this format 24557152b1d0Swdenk will change soon, there is no guarantee either. 2456c609719bSwdenk You better know what you are doing here. 2457c609719bSwdenk 2458c609719bSwdenk Note: overly (ab)use of the default environment is 2459c609719bSwdenk discouraged. Make sure to check other ways to preset 246074de7aefSWolfgang Denk the environment like the "source" command or the 2461c609719bSwdenk boot command first. 2462c609719bSwdenk 24635e724ca2SStephen Warren CONFIG_ENV_VARS_UBOOT_CONFIG 24645e724ca2SStephen Warren 24655e724ca2SStephen Warren Define this in order to add variables describing the 24665e724ca2SStephen Warren U-Boot build configuration to the default environment. 24675e724ca2SStephen Warren These will be named arch, cpu, board, vendor, and soc. 24685e724ca2SStephen Warren 24695e724ca2SStephen Warren Enabling this option will cause the following to be defined: 24705e724ca2SStephen Warren 24715e724ca2SStephen Warren - CONFIG_SYS_ARCH 24725e724ca2SStephen Warren - CONFIG_SYS_CPU 24735e724ca2SStephen Warren - CONFIG_SYS_BOARD 24745e724ca2SStephen Warren - CONFIG_SYS_VENDOR 24755e724ca2SStephen Warren - CONFIG_SYS_SOC 24765e724ca2SStephen Warren 24777e27f89fSTom Rini CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 24787e27f89fSTom Rini 24797e27f89fSTom Rini Define this in order to add variables describing certain 24807e27f89fSTom Rini run-time determined information about the hardware to the 24817e27f89fSTom Rini environment. These will be named board_name, board_rev. 24827e27f89fSTom Rini 248306fd8538SSimon Glass CONFIG_DELAY_ENVIRONMENT 248406fd8538SSimon Glass 248506fd8538SSimon Glass Normally the environment is loaded when the board is 248606fd8538SSimon Glass intialised so that it is available to U-Boot. This inhibits 248706fd8538SSimon Glass that so that the environment is not available until 248806fd8538SSimon Glass explicitly loaded later by U-Boot code. With CONFIG_OF_CONTROL 248906fd8538SSimon Glass this is instead controlled by the value of 249006fd8538SSimon Glass /config/load-environment. 249106fd8538SSimon Glass 2492a8c7c708Swdenk- DataFlash Support: 24932abbe075Swdenk CONFIG_HAS_DATAFLASH 24942abbe075Swdenk 24952abbe075Swdenk Defining this option enables DataFlash features and 24962abbe075Swdenk allows to read/write in Dataflash via the standard 24972abbe075Swdenk commands cp, md... 24982abbe075Swdenk 2499f61ec45eSEric Nelson- Serial Flash support 2500f61ec45eSEric Nelson CONFIG_CMD_SF 2501f61ec45eSEric Nelson 2502f61ec45eSEric Nelson Defining this option enables SPI flash commands 2503f61ec45eSEric Nelson 'sf probe/read/write/erase/update'. 2504f61ec45eSEric Nelson 2505f61ec45eSEric Nelson Usage requires an initial 'probe' to define the serial 2506f61ec45eSEric Nelson flash parameters, followed by read/write/erase/update 2507f61ec45eSEric Nelson commands. 2508f61ec45eSEric Nelson 2509f61ec45eSEric Nelson The following defaults may be provided by the platform 2510f61ec45eSEric Nelson to handle the common case when only a single serial 2511f61ec45eSEric Nelson flash is present on the system. 2512f61ec45eSEric Nelson 2513f61ec45eSEric Nelson CONFIG_SF_DEFAULT_BUS Bus identifier 2514f61ec45eSEric Nelson CONFIG_SF_DEFAULT_CS Chip-select 2515f61ec45eSEric Nelson CONFIG_SF_DEFAULT_MODE (see include/spi.h) 2516f61ec45eSEric Nelson CONFIG_SF_DEFAULT_SPEED in Hz 2517f61ec45eSEric Nelson 251824007273SSimon Glass CONFIG_CMD_SF_TEST 251924007273SSimon Glass 252024007273SSimon Glass Define this option to include a destructive SPI flash 252124007273SSimon Glass test ('sf test'). 252224007273SSimon Glass 25233f85ce27Swdenk- SystemACE Support: 25243f85ce27Swdenk CONFIG_SYSTEMACE 25253f85ce27Swdenk 25263f85ce27Swdenk Adding this option adds support for Xilinx SystemACE 25273f85ce27Swdenk chips attached via some sort of local bus. The address 252811ccc33fSMarcel Ziswiler of the chip must also be defined in the 25296d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SYSTEMACE_BASE macro. For example: 25303f85ce27Swdenk 25313f85ce27Swdenk #define CONFIG_SYSTEMACE 25326d0f6bcfSJean-Christophe PLAGNIOL-VILLARD #define CONFIG_SYS_SYSTEMACE_BASE 0xf0000000 25333f85ce27Swdenk 25343f85ce27Swdenk When SystemACE support is added, the "ace" device type 25353f85ce27Swdenk becomes available to the fat commands, i.e. fatls. 25363f85ce27Swdenk 2537ecb0ccd9SWolfgang Denk- TFTP Fixed UDP Port: 2538ecb0ccd9SWolfgang Denk CONFIG_TFTP_PORT 2539ecb0ccd9SWolfgang Denk 254028cb9375SWolfgang Denk If this is defined, the environment variable tftpsrcp 2541ecb0ccd9SWolfgang Denk is used to supply the TFTP UDP source port value. 254228cb9375SWolfgang Denk If tftpsrcp isn't defined, the normal pseudo-random port 2543ecb0ccd9SWolfgang Denk number generator is used. 2544ecb0ccd9SWolfgang Denk 254528cb9375SWolfgang Denk Also, the environment variable tftpdstp is used to supply 254628cb9375SWolfgang Denk the TFTP UDP destination port value. If tftpdstp isn't 254728cb9375SWolfgang Denk defined, the normal port 69 is used. 254828cb9375SWolfgang Denk 254928cb9375SWolfgang Denk The purpose for tftpsrcp is to allow a TFTP server to 2550ecb0ccd9SWolfgang Denk blindly start the TFTP transfer using the pre-configured 2551ecb0ccd9SWolfgang Denk target IP address and UDP port. This has the effect of 2552ecb0ccd9SWolfgang Denk "punching through" the (Windows XP) firewall, allowing 2553ecb0ccd9SWolfgang Denk the remainder of the TFTP transfer to proceed normally. 2554ecb0ccd9SWolfgang Denk A better solution is to properly configure the firewall, 2555ecb0ccd9SWolfgang Denk but sometimes that is not allowed. 2556ecb0ccd9SWolfgang Denk 2557bf36c5d5SSimon Glass- Hashing support: 2558bf36c5d5SSimon Glass CONFIG_CMD_HASH 2559bf36c5d5SSimon Glass 2560bf36c5d5SSimon Glass This enables a generic 'hash' command which can produce 2561bf36c5d5SSimon Glass hashes / digests from a few algorithms (e.g. SHA1, SHA256). 2562bf36c5d5SSimon Glass 2563bf36c5d5SSimon Glass CONFIG_HASH_VERIFY 2564bf36c5d5SSimon Glass 2565bf36c5d5SSimon Glass Enable the hash verify command (hash -v). This adds to code 2566bf36c5d5SSimon Glass size a little. 2567bf36c5d5SSimon Glass 2568bf36c5d5SSimon Glass CONFIG_SHA1 - support SHA1 hashing 2569bf36c5d5SSimon Glass CONFIG_SHA256 - support SHA256 hashing 2570bf36c5d5SSimon Glass 2571bf36c5d5SSimon Glass Note: There is also a sha1sum command, which should perhaps 2572bf36c5d5SSimon Glass be deprecated in favour of 'hash sha1'. 2573bf36c5d5SSimon Glass 2574a8c7c708Swdenk- Show boot progress: 2575c609719bSwdenk CONFIG_SHOW_BOOT_PROGRESS 2576c609719bSwdenk 2577c609719bSwdenk Defining this option allows to add some board- 2578c609719bSwdenk specific code (calling a user-provided function 2579c609719bSwdenk "show_boot_progress(int)") that enables you to show 2580c609719bSwdenk the system's boot progress on some display (for 2581c609719bSwdenk example, some LED's) on your board. At the moment, 2582c609719bSwdenk the following checkpoints are implemented: 2583c609719bSwdenk 25843a608ca0SSimon Glass- Detailed boot stage timing 25853a608ca0SSimon Glass CONFIG_BOOTSTAGE 25863a608ca0SSimon Glass Define this option to get detailed timing of each stage 25873a608ca0SSimon Glass of the boot process. 25883a608ca0SSimon Glass 25893a608ca0SSimon Glass CONFIG_BOOTSTAGE_USER_COUNT 25903a608ca0SSimon Glass This is the number of available user bootstage records. 25913a608ca0SSimon Glass Each time you call bootstage_mark(BOOTSTAGE_ID_ALLOC, ...) 25923a608ca0SSimon Glass a new ID will be allocated from this stash. If you exceed 25933a608ca0SSimon Glass the limit, recording will stop. 25943a608ca0SSimon Glass 25953a608ca0SSimon Glass CONFIG_BOOTSTAGE_REPORT 25963a608ca0SSimon Glass Define this to print a report before boot, similar to this: 25973a608ca0SSimon Glass 25983a608ca0SSimon Glass Timer summary in microseconds: 25993a608ca0SSimon Glass Mark Elapsed Stage 26003a608ca0SSimon Glass 0 0 reset 26013a608ca0SSimon Glass 3,575,678 3,575,678 board_init_f start 26023a608ca0SSimon Glass 3,575,695 17 arch_cpu_init A9 26033a608ca0SSimon Glass 3,575,777 82 arch_cpu_init done 26043a608ca0SSimon Glass 3,659,598 83,821 board_init_r start 26053a608ca0SSimon Glass 3,910,375 250,777 main_loop 26063a608ca0SSimon Glass 29,916,167 26,005,792 bootm_start 26073a608ca0SSimon Glass 30,361,327 445,160 start_kernel 26083a608ca0SSimon Glass 26092eba38cfSSimon Glass CONFIG_CMD_BOOTSTAGE 26102eba38cfSSimon Glass Add a 'bootstage' command which supports printing a report 26112eba38cfSSimon Glass and un/stashing of bootstage data. 26122eba38cfSSimon Glass 261394fd1316SSimon Glass CONFIG_BOOTSTAGE_FDT 261494fd1316SSimon Glass Stash the bootstage information in the FDT. A root 'bootstage' 261594fd1316SSimon Glass node is created with each bootstage id as a child. Each child 261694fd1316SSimon Glass has a 'name' property and either 'mark' containing the 261794fd1316SSimon Glass mark time in microsecond, or 'accum' containing the 261894fd1316SSimon Glass accumulated time for that bootstage id in microseconds. 261994fd1316SSimon Glass For example: 262094fd1316SSimon Glass 262194fd1316SSimon Glass bootstage { 262294fd1316SSimon Glass 154 { 262394fd1316SSimon Glass name = "board_init_f"; 262494fd1316SSimon Glass mark = <3575678>; 262594fd1316SSimon Glass }; 262694fd1316SSimon Glass 170 { 262794fd1316SSimon Glass name = "lcd"; 262894fd1316SSimon Glass accum = <33482>; 262994fd1316SSimon Glass }; 263094fd1316SSimon Glass }; 263194fd1316SSimon Glass 263294fd1316SSimon Glass Code in the Linux kernel can find this in /proc/devicetree. 263394fd1316SSimon Glass 26341372cce2SMarian BalakowiczLegacy uImage format: 26351372cce2SMarian Balakowicz 2636c609719bSwdenk Arg Where When 2637c609719bSwdenk 1 common/cmd_bootm.c before attempting to boot an image 2638c609719bSwdenk -1 common/cmd_bootm.c Image header has bad magic number 2639c609719bSwdenk 2 common/cmd_bootm.c Image header has correct magic number 2640c609719bSwdenk -2 common/cmd_bootm.c Image header has bad checksum 2641c609719bSwdenk 3 common/cmd_bootm.c Image header has correct checksum 2642c609719bSwdenk -3 common/cmd_bootm.c Image data has bad checksum 2643c609719bSwdenk 4 common/cmd_bootm.c Image data has correct checksum 2644c609719bSwdenk -4 common/cmd_bootm.c Image is for unsupported architecture 2645c609719bSwdenk 5 common/cmd_bootm.c Architecture check OK 26461372cce2SMarian Balakowicz -5 common/cmd_bootm.c Wrong Image Type (not kernel, multi) 2647c609719bSwdenk 6 common/cmd_bootm.c Image Type check OK 2648c609719bSwdenk -6 common/cmd_bootm.c gunzip uncompression error 2649c609719bSwdenk -7 common/cmd_bootm.c Unimplemented compression type 2650c609719bSwdenk 7 common/cmd_bootm.c Uncompression OK 26511372cce2SMarian Balakowicz 8 common/cmd_bootm.c No uncompress/copy overwrite error 2652c609719bSwdenk -9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX) 26531372cce2SMarian Balakowicz 26541372cce2SMarian Balakowicz 9 common/image.c Start initial ramdisk verification 26551372cce2SMarian Balakowicz -10 common/image.c Ramdisk header has bad magic number 26561372cce2SMarian Balakowicz -11 common/image.c Ramdisk header has bad checksum 26571372cce2SMarian Balakowicz 10 common/image.c Ramdisk header is OK 26581372cce2SMarian Balakowicz -12 common/image.c Ramdisk data has bad checksum 26591372cce2SMarian Balakowicz 11 common/image.c Ramdisk data has correct checksum 26601372cce2SMarian Balakowicz 12 common/image.c Ramdisk verification complete, start loading 266111ccc33fSMarcel Ziswiler -13 common/image.c Wrong Image Type (not PPC Linux ramdisk) 26621372cce2SMarian Balakowicz 13 common/image.c Start multifile image verification 26631372cce2SMarian Balakowicz 14 common/image.c No initial ramdisk, no multifile, continue. 26641372cce2SMarian Balakowicz 2665ea0364f1SPeter Tyser 15 arch/<arch>/lib/bootm.c All preparation done, transferring control to OS 2666c609719bSwdenk 2667a47a12beSStefan Roese -30 arch/powerpc/lib/board.c Fatal error, hang the system 266863e73c9aSwdenk -31 post/post.c POST test failed, detected by post_output_backlog() 266963e73c9aSwdenk -32 post/post.c POST test failed, detected by post_run_single() 267063e73c9aSwdenk 2671566a494fSHeiko Schocher 34 common/cmd_doc.c before loading a Image from a DOC device 2672566a494fSHeiko Schocher -35 common/cmd_doc.c Bad usage of "doc" command 2673566a494fSHeiko Schocher 35 common/cmd_doc.c correct usage of "doc" command 2674566a494fSHeiko Schocher -36 common/cmd_doc.c No boot device 2675566a494fSHeiko Schocher 36 common/cmd_doc.c correct boot device 2676566a494fSHeiko Schocher -37 common/cmd_doc.c Unknown Chip ID on boot device 2677566a494fSHeiko Schocher 37 common/cmd_doc.c correct chip ID found, device available 2678566a494fSHeiko Schocher -38 common/cmd_doc.c Read Error on boot device 2679566a494fSHeiko Schocher 38 common/cmd_doc.c reading Image header from DOC device OK 2680566a494fSHeiko Schocher -39 common/cmd_doc.c Image header has bad magic number 2681566a494fSHeiko Schocher 39 common/cmd_doc.c Image header has correct magic number 2682566a494fSHeiko Schocher -40 common/cmd_doc.c Error reading Image from DOC device 2683566a494fSHeiko Schocher 40 common/cmd_doc.c Image header has correct magic number 2684566a494fSHeiko Schocher 41 common/cmd_ide.c before loading a Image from a IDE device 2685566a494fSHeiko Schocher -42 common/cmd_ide.c Bad usage of "ide" command 2686566a494fSHeiko Schocher 42 common/cmd_ide.c correct usage of "ide" command 2687566a494fSHeiko Schocher -43 common/cmd_ide.c No boot device 2688566a494fSHeiko Schocher 43 common/cmd_ide.c boot device found 2689566a494fSHeiko Schocher -44 common/cmd_ide.c Device not available 2690566a494fSHeiko Schocher 44 common/cmd_ide.c Device available 2691566a494fSHeiko Schocher -45 common/cmd_ide.c wrong partition selected 2692566a494fSHeiko Schocher 45 common/cmd_ide.c partition selected 2693566a494fSHeiko Schocher -46 common/cmd_ide.c Unknown partition table 2694566a494fSHeiko Schocher 46 common/cmd_ide.c valid partition table found 2695566a494fSHeiko Schocher -47 common/cmd_ide.c Invalid partition type 2696566a494fSHeiko Schocher 47 common/cmd_ide.c correct partition type 2697566a494fSHeiko Schocher -48 common/cmd_ide.c Error reading Image Header on boot device 2698566a494fSHeiko Schocher 48 common/cmd_ide.c reading Image Header from IDE device OK 2699566a494fSHeiko Schocher -49 common/cmd_ide.c Image header has bad magic number 2700566a494fSHeiko Schocher 49 common/cmd_ide.c Image header has correct magic number 2701566a494fSHeiko Schocher -50 common/cmd_ide.c Image header has bad checksum 2702566a494fSHeiko Schocher 50 common/cmd_ide.c Image header has correct checksum 2703566a494fSHeiko Schocher -51 common/cmd_ide.c Error reading Image from IDE device 2704566a494fSHeiko Schocher 51 common/cmd_ide.c reading Image from IDE device OK 2705566a494fSHeiko Schocher 52 common/cmd_nand.c before loading a Image from a NAND device 2706566a494fSHeiko Schocher -53 common/cmd_nand.c Bad usage of "nand" command 2707566a494fSHeiko Schocher 53 common/cmd_nand.c correct usage of "nand" command 2708566a494fSHeiko Schocher -54 common/cmd_nand.c No boot device 2709566a494fSHeiko Schocher 54 common/cmd_nand.c boot device found 2710566a494fSHeiko Schocher -55 common/cmd_nand.c Unknown Chip ID on boot device 2711566a494fSHeiko Schocher 55 common/cmd_nand.c correct chip ID found, device available 2712566a494fSHeiko Schocher -56 common/cmd_nand.c Error reading Image Header on boot device 2713566a494fSHeiko Schocher 56 common/cmd_nand.c reading Image Header from NAND device OK 2714566a494fSHeiko Schocher -57 common/cmd_nand.c Image header has bad magic number 2715566a494fSHeiko Schocher 57 common/cmd_nand.c Image header has correct magic number 2716566a494fSHeiko Schocher -58 common/cmd_nand.c Error reading Image from NAND device 2717566a494fSHeiko Schocher 58 common/cmd_nand.c reading Image from NAND device OK 2718c609719bSwdenk 2719566a494fSHeiko Schocher -60 common/env_common.c Environment has a bad CRC, using default 2720c609719bSwdenk 2721566a494fSHeiko Schocher 64 net/eth.c starting with Ethernet configuration. 2722566a494fSHeiko Schocher -64 net/eth.c no Ethernet found. 2723566a494fSHeiko Schocher 65 net/eth.c Ethernet found. 2724206c60cbSwdenk 2725566a494fSHeiko Schocher -80 common/cmd_net.c usage wrong 2726566a494fSHeiko Schocher 80 common/cmd_net.c before calling NetLoop() 272711ccc33fSMarcel Ziswiler -81 common/cmd_net.c some error in NetLoop() occurred 2728566a494fSHeiko Schocher 81 common/cmd_net.c NetLoop() back without error 2729566a494fSHeiko Schocher -82 common/cmd_net.c size == 0 (File with size 0 loaded) 2730566a494fSHeiko Schocher 82 common/cmd_net.c trying automatic boot 273174de7aefSWolfgang Denk 83 common/cmd_net.c running "source" command 273274de7aefSWolfgang Denk -83 common/cmd_net.c some error in automatic boot or "source" command 2733566a494fSHeiko Schocher 84 common/cmd_net.c end without errors 2734c609719bSwdenk 27351372cce2SMarian BalakowiczFIT uImage format: 27361372cce2SMarian Balakowicz 27371372cce2SMarian Balakowicz Arg Where When 27381372cce2SMarian Balakowicz 100 common/cmd_bootm.c Kernel FIT Image has correct format 27391372cce2SMarian Balakowicz -100 common/cmd_bootm.c Kernel FIT Image has incorrect format 27401372cce2SMarian Balakowicz 101 common/cmd_bootm.c No Kernel subimage unit name, using configuration 27411372cce2SMarian Balakowicz -101 common/cmd_bootm.c Can't get configuration for kernel subimage 27421372cce2SMarian Balakowicz 102 common/cmd_bootm.c Kernel unit name specified 27431372cce2SMarian Balakowicz -103 common/cmd_bootm.c Can't get kernel subimage node offset 2744f773bea8SMarian Balakowicz 103 common/cmd_bootm.c Found configuration node 27451372cce2SMarian Balakowicz 104 common/cmd_bootm.c Got kernel subimage node offset 27461372cce2SMarian Balakowicz -104 common/cmd_bootm.c Kernel subimage hash verification failed 27471372cce2SMarian Balakowicz 105 common/cmd_bootm.c Kernel subimage hash verification OK 27481372cce2SMarian Balakowicz -105 common/cmd_bootm.c Kernel subimage is for unsupported architecture 27491372cce2SMarian Balakowicz 106 common/cmd_bootm.c Architecture check OK 275011ccc33fSMarcel Ziswiler -106 common/cmd_bootm.c Kernel subimage has wrong type 275111ccc33fSMarcel Ziswiler 107 common/cmd_bootm.c Kernel subimage type OK 27521372cce2SMarian Balakowicz -107 common/cmd_bootm.c Can't get kernel subimage data/size 27531372cce2SMarian Balakowicz 108 common/cmd_bootm.c Got kernel subimage data/size 27541372cce2SMarian Balakowicz -108 common/cmd_bootm.c Wrong image type (not legacy, FIT) 27551372cce2SMarian Balakowicz -109 common/cmd_bootm.c Can't get kernel subimage type 27561372cce2SMarian Balakowicz -110 common/cmd_bootm.c Can't get kernel subimage comp 27571372cce2SMarian Balakowicz -111 common/cmd_bootm.c Can't get kernel subimage os 27581372cce2SMarian Balakowicz -112 common/cmd_bootm.c Can't get kernel subimage load address 27591372cce2SMarian Balakowicz -113 common/cmd_bootm.c Image uncompress/copy overwrite error 27601372cce2SMarian Balakowicz 27611372cce2SMarian Balakowicz 120 common/image.c Start initial ramdisk verification 27621372cce2SMarian Balakowicz -120 common/image.c Ramdisk FIT image has incorrect format 27631372cce2SMarian Balakowicz 121 common/image.c Ramdisk FIT image has correct format 276411ccc33fSMarcel Ziswiler 122 common/image.c No ramdisk subimage unit name, using configuration 27651372cce2SMarian Balakowicz -122 common/image.c Can't get configuration for ramdisk subimage 27661372cce2SMarian Balakowicz 123 common/image.c Ramdisk unit name specified 27671372cce2SMarian Balakowicz -124 common/image.c Can't get ramdisk subimage node offset 27681372cce2SMarian Balakowicz 125 common/image.c Got ramdisk subimage node offset 27691372cce2SMarian Balakowicz -125 common/image.c Ramdisk subimage hash verification failed 27701372cce2SMarian Balakowicz 126 common/image.c Ramdisk subimage hash verification OK 27711372cce2SMarian Balakowicz -126 common/image.c Ramdisk subimage for unsupported architecture 27721372cce2SMarian Balakowicz 127 common/image.c Architecture check OK 27731372cce2SMarian Balakowicz -127 common/image.c Can't get ramdisk subimage data/size 27741372cce2SMarian Balakowicz 128 common/image.c Got ramdisk subimage data/size 27751372cce2SMarian Balakowicz 129 common/image.c Can't get ramdisk load address 27761372cce2SMarian Balakowicz -129 common/image.c Got ramdisk load address 27771372cce2SMarian Balakowicz 277811ccc33fSMarcel Ziswiler -130 common/cmd_doc.c Incorrect FIT image format 27791372cce2SMarian Balakowicz 131 common/cmd_doc.c FIT image format OK 27801372cce2SMarian Balakowicz 278111ccc33fSMarcel Ziswiler -140 common/cmd_ide.c Incorrect FIT image format 27821372cce2SMarian Balakowicz 141 common/cmd_ide.c FIT image format OK 27831372cce2SMarian Balakowicz 278411ccc33fSMarcel Ziswiler -150 common/cmd_nand.c Incorrect FIT image format 27851372cce2SMarian Balakowicz 151 common/cmd_nand.c FIT image format OK 27861372cce2SMarian Balakowicz 2787d95f6ec7SGabe Black- FIT image support: 2788d95f6ec7SGabe Black CONFIG_FIT 2789d95f6ec7SGabe Black Enable support for the FIT uImage format. 2790d95f6ec7SGabe Black 2791d95f6ec7SGabe Black CONFIG_FIT_BEST_MATCH 2792d95f6ec7SGabe Black When no configuration is explicitly selected, default to the 2793d95f6ec7SGabe Black one whose fdt's compatibility field best matches that of 2794d95f6ec7SGabe Black U-Boot itself. A match is considered "best" if it matches the 2795d95f6ec7SGabe Black most specific compatibility entry of U-Boot's fdt's root node. 2796d95f6ec7SGabe Black The order of entries in the configuration's fdt is ignored. 2797d95f6ec7SGabe Black 27984cf2609bSWolfgang Denk- Standalone program support: 27994cf2609bSWolfgang Denk CONFIG_STANDALONE_LOAD_ADDR 28004cf2609bSWolfgang Denk 28016feff899SWolfgang Denk This option defines a board specific value for the 28026feff899SWolfgang Denk address where standalone program gets loaded, thus 28036feff899SWolfgang Denk overwriting the architecture dependent default 28044cf2609bSWolfgang Denk settings. 28054cf2609bSWolfgang Denk 28064cf2609bSWolfgang Denk- Frame Buffer Address: 28074cf2609bSWolfgang Denk CONFIG_FB_ADDR 28084cf2609bSWolfgang Denk 28094cf2609bSWolfgang Denk Define CONFIG_FB_ADDR if you want to use specific 281044a53b57SWolfgang Denk address for frame buffer. This is typically the case 281144a53b57SWolfgang Denk when using a graphics controller has separate video 281244a53b57SWolfgang Denk memory. U-Boot will then place the frame buffer at 281344a53b57SWolfgang Denk the given address instead of dynamically reserving it 281444a53b57SWolfgang Denk in system RAM by calling lcd_setmem(), which grabs 281544a53b57SWolfgang Denk the memory for the frame buffer depending on the 281644a53b57SWolfgang Denk configured panel size. 28174cf2609bSWolfgang Denk 28184cf2609bSWolfgang Denk Please see board_init_f function. 28194cf2609bSWolfgang Denk 2820cccfc2abSDetlev Zundel- Automatic software updates via TFTP server 2821cccfc2abSDetlev Zundel CONFIG_UPDATE_TFTP 2822cccfc2abSDetlev Zundel CONFIG_UPDATE_TFTP_CNT_MAX 2823cccfc2abSDetlev Zundel CONFIG_UPDATE_TFTP_MSEC_MAX 2824cccfc2abSDetlev Zundel 2825cccfc2abSDetlev Zundel These options enable and control the auto-update feature; 2826cccfc2abSDetlev Zundel for a more detailed description refer to doc/README.update. 2827cccfc2abSDetlev Zundel 2828cccfc2abSDetlev Zundel- MTD Support (mtdparts command, UBI support) 2829cccfc2abSDetlev Zundel CONFIG_MTD_DEVICE 2830cccfc2abSDetlev Zundel 2831cccfc2abSDetlev Zundel Adds the MTD device infrastructure from the Linux kernel. 2832cccfc2abSDetlev Zundel Needed for mtdparts command support. 2833cccfc2abSDetlev Zundel 2834cccfc2abSDetlev Zundel CONFIG_MTD_PARTITIONS 2835cccfc2abSDetlev Zundel 2836cccfc2abSDetlev Zundel Adds the MTD partitioning infrastructure from the Linux 2837cccfc2abSDetlev Zundel kernel. Needed for UBI support. 2838cccfc2abSDetlev Zundel 283970c219cdSJoe Hershberger- UBI support 284070c219cdSJoe Hershberger CONFIG_CMD_UBI 284170c219cdSJoe Hershberger 284270c219cdSJoe Hershberger Adds commands for interacting with MTD partitions formatted 284370c219cdSJoe Hershberger with the UBI flash translation layer 284470c219cdSJoe Hershberger 284570c219cdSJoe Hershberger Requires also defining CONFIG_RBTREE 284670c219cdSJoe Hershberger 2847147162daSJoe Hershberger CONFIG_UBI_SILENCE_MSG 2848147162daSJoe Hershberger 2849147162daSJoe Hershberger Make the verbose messages from UBI stop printing. This leaves 2850147162daSJoe Hershberger warnings and errors enabled. 2851147162daSJoe Hershberger 285270c219cdSJoe Hershberger- UBIFS support 285370c219cdSJoe Hershberger CONFIG_CMD_UBIFS 285470c219cdSJoe Hershberger 285570c219cdSJoe Hershberger Adds commands for interacting with UBI volumes formatted as 285670c219cdSJoe Hershberger UBIFS. UBIFS is read-only in u-boot. 285770c219cdSJoe Hershberger 285870c219cdSJoe Hershberger Requires UBI support as well as CONFIG_LZO 285970c219cdSJoe Hershberger 2860147162daSJoe Hershberger CONFIG_UBIFS_SILENCE_MSG 2861147162daSJoe Hershberger 2862147162daSJoe Hershberger Make the verbose messages from UBIFS stop printing. This leaves 2863147162daSJoe Hershberger warnings and errors enabled. 2864147162daSJoe Hershberger 28656a11cf48SDaniel Schwierzeck- SPL framework 28666a11cf48SDaniel Schwierzeck CONFIG_SPL 28676a11cf48SDaniel Schwierzeck Enable building of SPL globally. 28686a11cf48SDaniel Schwierzeck 286995579793STom Rini CONFIG_SPL_LDSCRIPT 287095579793STom Rini LDSCRIPT for linking the SPL binary. 287195579793STom Rini 28726ebc3461SAlbert ARIBAUD CONFIG_SPL_MAX_FOOTPRINT 28736ebc3461SAlbert ARIBAUD Maximum size in memory allocated to the SPL, BSS included. 28746ebc3461SAlbert ARIBAUD When defined, the linker checks that the actual memory 28756ebc3461SAlbert ARIBAUD used by SPL from _start to __bss_end does not exceed it. 28768960af8bSAlbert ARIBAUD CONFIG_SPL_MAX_FOOTPRINT and CONFIG_SPL_BSS_MAX_SIZE 28776ebc3461SAlbert ARIBAUD must not be both defined at the same time. 28786ebc3461SAlbert ARIBAUD 287995579793STom Rini CONFIG_SPL_MAX_SIZE 28806ebc3461SAlbert ARIBAUD Maximum size of the SPL image (text, data, rodata, and 28816ebc3461SAlbert ARIBAUD linker lists sections), BSS excluded. 28826ebc3461SAlbert ARIBAUD When defined, the linker checks that the actual size does 28836ebc3461SAlbert ARIBAUD not exceed it. 288495579793STom Rini 28856a11cf48SDaniel Schwierzeck CONFIG_SPL_TEXT_BASE 28866a11cf48SDaniel Schwierzeck TEXT_BASE for linking the SPL binary. 28876a11cf48SDaniel Schwierzeck 288894a45bb1SScott Wood CONFIG_SPL_RELOC_TEXT_BASE 288994a45bb1SScott Wood Address to relocate to. If unspecified, this is equal to 289094a45bb1SScott Wood CONFIG_SPL_TEXT_BASE (i.e. no relocation is done). 289194a45bb1SScott Wood 289295579793STom Rini CONFIG_SPL_BSS_START_ADDR 289395579793STom Rini Link address for the BSS within the SPL binary. 289495579793STom Rini 289595579793STom Rini CONFIG_SPL_BSS_MAX_SIZE 28966ebc3461SAlbert ARIBAUD Maximum size in memory allocated to the SPL BSS. 28976ebc3461SAlbert ARIBAUD When defined, the linker checks that the actual memory used 28986ebc3461SAlbert ARIBAUD by SPL from __bss_start to __bss_end does not exceed it. 28998960af8bSAlbert ARIBAUD CONFIG_SPL_MAX_FOOTPRINT and CONFIG_SPL_BSS_MAX_SIZE 29006ebc3461SAlbert ARIBAUD must not be both defined at the same time. 290195579793STom Rini 290295579793STom Rini CONFIG_SPL_STACK 290395579793STom Rini Adress of the start of the stack SPL will use 290495579793STom Rini 290594a45bb1SScott Wood CONFIG_SPL_RELOC_STACK 290694a45bb1SScott Wood Adress of the start of the stack SPL will use after 290794a45bb1SScott Wood relocation. If unspecified, this is equal to 290894a45bb1SScott Wood CONFIG_SPL_STACK. 290994a45bb1SScott Wood 291095579793STom Rini CONFIG_SYS_SPL_MALLOC_START 291195579793STom Rini Starting address of the malloc pool used in SPL. 291295579793STom Rini 291395579793STom Rini CONFIG_SYS_SPL_MALLOC_SIZE 291495579793STom Rini The size of the malloc pool used in SPL. 29156a11cf48SDaniel Schwierzeck 291647f7bcaeSTom Rini CONFIG_SPL_FRAMEWORK 291747f7bcaeSTom Rini Enable the SPL framework under common/. This framework 291847f7bcaeSTom Rini supports MMC, NAND and YMODEM loading of U-Boot and NAND 291947f7bcaeSTom Rini NAND loading of the Linux Kernel. 292047f7bcaeSTom Rini 2921861a86f4STom Rini CONFIG_SPL_DISPLAY_PRINT 2922861a86f4STom Rini For ARM, enable an optional function to print more information 2923861a86f4STom Rini about the running system. 2924861a86f4STom Rini 29254b919725SScott Wood CONFIG_SPL_INIT_MINIMAL 29264b919725SScott Wood Arch init code should be built for a very small image 29274b919725SScott Wood 29286a11cf48SDaniel Schwierzeck CONFIG_SPL_LIBCOMMON_SUPPORT 29296a11cf48SDaniel Schwierzeck Support for common/libcommon.o in SPL binary 29306a11cf48SDaniel Schwierzeck 29316a11cf48SDaniel Schwierzeck CONFIG_SPL_LIBDISK_SUPPORT 29326a11cf48SDaniel Schwierzeck Support for disk/libdisk.o in SPL binary 29336a11cf48SDaniel Schwierzeck 29346a11cf48SDaniel Schwierzeck CONFIG_SPL_I2C_SUPPORT 29356a11cf48SDaniel Schwierzeck Support for drivers/i2c/libi2c.o in SPL binary 29366a11cf48SDaniel Schwierzeck 29376a11cf48SDaniel Schwierzeck CONFIG_SPL_GPIO_SUPPORT 29386a11cf48SDaniel Schwierzeck Support for drivers/gpio/libgpio.o in SPL binary 29396a11cf48SDaniel Schwierzeck 29406a11cf48SDaniel Schwierzeck CONFIG_SPL_MMC_SUPPORT 29416a11cf48SDaniel Schwierzeck Support for drivers/mmc/libmmc.o in SPL binary 29426a11cf48SDaniel Schwierzeck 294395579793STom Rini CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR, 294495579793STom Rini CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS, 294595579793STom Rini CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 294695579793STom Rini Address, size and partition on the MMC to load U-Boot from 294795579793STom Rini when the MMC is being used in raw mode. 294895579793STom Rini 29492b75b0adSPeter Korsgaard CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 29502b75b0adSPeter Korsgaard Sector to load kernel uImage from when MMC is being 29512b75b0adSPeter Korsgaard used in raw mode (for Falcon mode) 29522b75b0adSPeter Korsgaard 29532b75b0adSPeter Korsgaard CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR, 29542b75b0adSPeter Korsgaard CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 29552b75b0adSPeter Korsgaard Sector and number of sectors to load kernel argument 29562b75b0adSPeter Korsgaard parameters from when MMC is being used in raw mode 29572b75b0adSPeter Korsgaard (for falcon mode) 29582b75b0adSPeter Korsgaard 295995579793STom Rini CONFIG_SPL_FAT_SUPPORT 296095579793STom Rini Support for fs/fat/libfat.o in SPL binary 296195579793STom Rini 296295579793STom Rini CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME 296395579793STom Rini Filename to read to load U-Boot when reading from FAT 296495579793STom Rini 29657ad2cc79SPeter Korsgaard CONFIG_SPL_FAT_LOAD_KERNEL_NAME 29667ad2cc79SPeter Korsgaard Filename to read to load kernel uImage when reading 29677ad2cc79SPeter Korsgaard from FAT (for Falcon mode) 29687ad2cc79SPeter Korsgaard 29697ad2cc79SPeter Korsgaard CONFIG_SPL_FAT_LOAD_ARGS_NAME 29707ad2cc79SPeter Korsgaard Filename to read to load kernel argument parameters 29717ad2cc79SPeter Korsgaard when reading from FAT (for Falcon mode) 29727ad2cc79SPeter Korsgaard 297306f60ae3SScott Wood CONFIG_SPL_MPC83XX_WAIT_FOR_NAND 297406f60ae3SScott Wood Set this for NAND SPL on PPC mpc83xx targets, so that 297506f60ae3SScott Wood start.S waits for the rest of the SPL to load before 297606f60ae3SScott Wood continuing (the hardware starts execution after just 297706f60ae3SScott Wood loading the first page rather than the full 4K). 297806f60ae3SScott Wood 29796f2f01b9SScott Wood CONFIG_SPL_NAND_BASE 29806f2f01b9SScott Wood Include nand_base.c in the SPL. Requires 29816f2f01b9SScott Wood CONFIG_SPL_NAND_DRIVERS. 29826f2f01b9SScott Wood 29836f2f01b9SScott Wood CONFIG_SPL_NAND_DRIVERS 29846f2f01b9SScott Wood SPL uses normal NAND drivers, not minimal drivers. 29856f2f01b9SScott Wood 29866f2f01b9SScott Wood CONFIG_SPL_NAND_ECC 29876f2f01b9SScott Wood Include standard software ECC in the SPL 29886f2f01b9SScott Wood 298995579793STom Rini CONFIG_SPL_NAND_SIMPLE 29907d4b7955SScott Wood Support for NAND boot using simple NAND drivers that 29917d4b7955SScott Wood expose the cmd_ctrl() interface. 299295579793STom Rini 299395579793STom Rini CONFIG_SYS_NAND_5_ADDR_CYCLE, CONFIG_SYS_NAND_PAGE_COUNT, 299495579793STom Rini CONFIG_SYS_NAND_PAGE_SIZE, CONFIG_SYS_NAND_OOBSIZE, 299595579793STom Rini CONFIG_SYS_NAND_BLOCK_SIZE, CONFIG_SYS_NAND_BAD_BLOCK_POS, 299695579793STom Rini CONFIG_SYS_NAND_ECCPOS, CONFIG_SYS_NAND_ECCSIZE, 299795579793STom Rini CONFIG_SYS_NAND_ECCBYTES 299895579793STom Rini Defines the size and behavior of the NAND that SPL uses 29997d4b7955SScott Wood to read U-Boot 300095579793STom Rini 300195579793STom Rini CONFIG_SYS_NAND_U_BOOT_OFFS 30027d4b7955SScott Wood Location in NAND to read U-Boot from 30037d4b7955SScott Wood 30047d4b7955SScott Wood CONFIG_SYS_NAND_U_BOOT_DST 30057d4b7955SScott Wood Location in memory to load U-Boot to 30067d4b7955SScott Wood 30077d4b7955SScott Wood CONFIG_SYS_NAND_U_BOOT_SIZE 30087d4b7955SScott Wood Size of image to load 300995579793STom Rini 301095579793STom Rini CONFIG_SYS_NAND_U_BOOT_START 30117d4b7955SScott Wood Entry point in loaded image to jump to 301295579793STom Rini 301395579793STom Rini CONFIG_SYS_NAND_HW_ECC_OOBFIRST 301495579793STom Rini Define this if you need to first read the OOB and then the 301595579793STom Rini data. This is used for example on davinci plattforms. 301695579793STom Rini 301795579793STom Rini CONFIG_SPL_OMAP3_ID_NAND 301895579793STom Rini Support for an OMAP3-specific set of functions to return the 301995579793STom Rini ID and MFR of the first attached NAND chip, if present. 302095579793STom Rini 30216a11cf48SDaniel Schwierzeck CONFIG_SPL_SERIAL_SUPPORT 30226a11cf48SDaniel Schwierzeck Support for drivers/serial/libserial.o in SPL binary 30236a11cf48SDaniel Schwierzeck 30246a11cf48SDaniel Schwierzeck CONFIG_SPL_SPI_FLASH_SUPPORT 30256a11cf48SDaniel Schwierzeck Support for drivers/mtd/spi/libspi_flash.o in SPL binary 30266a11cf48SDaniel Schwierzeck 30276a11cf48SDaniel Schwierzeck CONFIG_SPL_SPI_SUPPORT 30286a11cf48SDaniel Schwierzeck Support for drivers/spi/libspi.o in SPL binary 30296a11cf48SDaniel Schwierzeck 3030c57b953dSPavel Machek CONFIG_SPL_RAM_DEVICE 3031c57b953dSPavel Machek Support for running image already present in ram, in SPL binary 3032c57b953dSPavel Machek 30336a11cf48SDaniel Schwierzeck CONFIG_SPL_LIBGENERIC_SUPPORT 30346a11cf48SDaniel Schwierzeck Support for lib/libgeneric.o in SPL binary 30351372cce2SMarian Balakowicz 303674752baaSScott Wood CONFIG_SPL_PAD_TO 30376113d3f2SBenoît Thébaudeau Image offset to which the SPL should be padded before appending 30386113d3f2SBenoît Thébaudeau the SPL payload. By default, this is defined as 30396113d3f2SBenoît Thébaudeau CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined. 30406113d3f2SBenoît Thébaudeau CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL 30416113d3f2SBenoît Thébaudeau payload without any padding, or >= CONFIG_SPL_MAX_SIZE. 304274752baaSScott Wood 3043ca2fca22SScott Wood CONFIG_SPL_TARGET 3044ca2fca22SScott Wood Final target image containing SPL and payload. Some SPLs 3045ca2fca22SScott Wood use an arch-specific makefile fragment instead, for 3046ca2fca22SScott Wood example if more than one image needs to be produced. 3047ca2fca22SScott Wood 304887ebee39SSimon Glass CONFIG_FIT_SPL_PRINT 304987ebee39SSimon Glass Printing information about a FIT image adds quite a bit of 305087ebee39SSimon Glass code to SPL. So this is normally disabled in SPL. Use this 305187ebee39SSimon Glass option to re-enable it. This will affect the output of the 305287ebee39SSimon Glass bootm command when booting a FIT image. 305387ebee39SSimon Glass 3054c609719bSwdenkModem Support: 3055c609719bSwdenk-------------- 3056c609719bSwdenk 3057566e5cf4SWolfgang Denk[so far only for SMDK2400 boards] 3058c609719bSwdenk 305911ccc33fSMarcel Ziswiler- Modem support enable: 3060c609719bSwdenk CONFIG_MODEM_SUPPORT 3061c609719bSwdenk 3062c609719bSwdenk- RTS/CTS Flow control enable: 3063c609719bSwdenk CONFIG_HWFLOW 3064c609719bSwdenk 3065c609719bSwdenk- Modem debug support: 3066c609719bSwdenk CONFIG_MODEM_SUPPORT_DEBUG 3067c609719bSwdenk 3068c609719bSwdenk Enables debugging stuff (char screen[1024], dbg()) 3069c609719bSwdenk for modem support. Useful only with BDI2000. 3070c609719bSwdenk 3071a8c7c708Swdenk- Interrupt support (PPC): 3072a8c7c708Swdenk 3073a8c7c708Swdenk There are common interrupt_init() and timer_interrupt() 3074a8c7c708Swdenk for all PPC archs. interrupt_init() calls interrupt_init_cpu() 307511ccc33fSMarcel Ziswiler for CPU specific initialization. interrupt_init_cpu() 3076a8c7c708Swdenk should set decrementer_count to appropriate value. If 307711ccc33fSMarcel Ziswiler CPU resets decrementer automatically after interrupt 3078a8c7c708Swdenk (ppc4xx) it should set decrementer_count to zero. 307911ccc33fSMarcel Ziswiler timer_interrupt() calls timer_interrupt_cpu() for CPU 3080a8c7c708Swdenk specific handling. If board has watchdog / status_led 3081a8c7c708Swdenk / other_activity_monitor it works automatically from 3082a8c7c708Swdenk general timer_interrupt(). 3083a8c7c708Swdenk 3084c609719bSwdenk- General: 3085c609719bSwdenk 3086c609719bSwdenk In the target system modem support is enabled when a 3087c609719bSwdenk specific key (key combination) is pressed during 3088c609719bSwdenk power-on. Otherwise U-Boot will boot normally 308911ccc33fSMarcel Ziswiler (autoboot). The key_pressed() function is called from 3090c609719bSwdenk board_init(). Currently key_pressed() is a dummy 3091c609719bSwdenk function, returning 1 and thus enabling modem 3092c609719bSwdenk initialization. 3093c609719bSwdenk 3094c609719bSwdenk If there are no modem init strings in the 3095c609719bSwdenk environment, U-Boot proceed to autoboot; the 3096c609719bSwdenk previous output (banner, info printfs) will be 309711ccc33fSMarcel Ziswiler suppressed, though. 3098c609719bSwdenk 3099c609719bSwdenk See also: doc/README.Modem 3100c609719bSwdenk 31019660e442SHelmut RaigerBoard initialization settings: 31029660e442SHelmut Raiger------------------------------ 31039660e442SHelmut Raiger 31049660e442SHelmut RaigerDuring Initialization u-boot calls a number of board specific functions 31059660e442SHelmut Raigerto allow the preparation of board specific prerequisites, e.g. pin setup 31069660e442SHelmut Raigerbefore drivers are initialized. To enable these callbacks the 31079660e442SHelmut Raigerfollowing configuration macros have to be defined. Currently this is 31089660e442SHelmut Raigerarchitecture specific, so please check arch/your_architecture/lib/board.c 31099660e442SHelmut Raigertypically in board_init_f() and board_init_r(). 31109660e442SHelmut Raiger 31119660e442SHelmut Raiger- CONFIG_BOARD_EARLY_INIT_F: Call board_early_init_f() 31129660e442SHelmut Raiger- CONFIG_BOARD_EARLY_INIT_R: Call board_early_init_r() 31139660e442SHelmut Raiger- CONFIG_BOARD_LATE_INIT: Call board_late_init() 31149660e442SHelmut Raiger- CONFIG_BOARD_POSTCLK_INIT: Call board_postclk_init() 3115c609719bSwdenk 3116c609719bSwdenkConfiguration Settings: 3117c609719bSwdenk----------------------- 3118c609719bSwdenk 31196d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_LONGHELP: Defined when you want long help messages included; 3120c609719bSwdenk undefine this when you're short of memory. 3121c609719bSwdenk 31222fb2604dSPeter Tyser- CONFIG_SYS_HELP_CMD_WIDTH: Defined when you want to override the default 31232fb2604dSPeter Tyser width of the commands listed in the 'help' command output. 31242fb2604dSPeter Tyser 31256d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PROMPT: This is what U-Boot prints on the console to 3126c609719bSwdenk prompt for user input. 3127c609719bSwdenk 31286d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CBSIZE: Buffer size for input from the Console 3129c609719bSwdenk 31306d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PBSIZE: Buffer size for Console output 3131c609719bSwdenk 31326d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAXARGS: max. Number of arguments accepted for monitor commands 3133c609719bSwdenk 31346d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_BARGSIZE: Buffer size for Boot Arguments which are passed to 3135c609719bSwdenk the application (usually a Linux kernel) when it is 3136c609719bSwdenk booted 3137c609719bSwdenk 31386d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_BAUDRATE_TABLE: 3139c609719bSwdenk List of legal baudrate settings for this board. 3140c609719bSwdenk 31416d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CONSOLE_INFO_QUIET 3142c609719bSwdenk Suppress display of console information at boot. 3143c609719bSwdenk 31446d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CONSOLE_IS_IN_ENV 3145c609719bSwdenk If the board specific function 3146c609719bSwdenk extern int overwrite_console (void); 3147c609719bSwdenk returns 1, the stdin, stderr and stdout are switched to the 3148c609719bSwdenk serial port, else the settings in the environment are used. 3149c609719bSwdenk 31506d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 3151c609719bSwdenk Enable the call to overwrite_console(). 3152c609719bSwdenk 31536d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CONSOLE_ENV_OVERWRITE 3154c609719bSwdenk Enable overwrite of previous console environment settings. 3155c609719bSwdenk 31566d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END: 3157c609719bSwdenk Begin and End addresses of the area used by the 3158c609719bSwdenk simple memory test. 3159c609719bSwdenk 31606d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_ALT_MEMTEST: 3161c609719bSwdenk Enable an alternate, more extensive memory test. 3162c609719bSwdenk 31636d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MEMTEST_SCRATCH: 31645f535fe1Swdenk Scratch address used by the alternate memory test 31655f535fe1Swdenk You only need to set this if address zero isn't writeable 31665f535fe1Swdenk 31676d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MEM_TOP_HIDE (PPC only): 31686d0f6bcfSJean-Christophe PLAGNIOL-VILLARD If CONFIG_SYS_MEM_TOP_HIDE is defined in the board config header, 316914f73ca6SStefan Roese this specified memory area will get subtracted from the top 317011ccc33fSMarcel Ziswiler (end) of RAM and won't get "touched" at all by U-Boot. By 317114f73ca6SStefan Roese fixing up gd->ram_size the Linux kernel should gets passed 317214f73ca6SStefan Roese the now "corrected" memory size and won't touch it either. 317314f73ca6SStefan Roese This should work for arch/ppc and arch/powerpc. Only Linux 31745e12e75dSStefan Roese board ports in arch/powerpc with bootwrapper support that 317514f73ca6SStefan Roese recalculate the memory size from the SDRAM controller setup 31765e12e75dSStefan Roese will have to get fixed in Linux additionally. 317714f73ca6SStefan Roese 317814f73ca6SStefan Roese This option can be used as a workaround for the 440EPx/GRx 317914f73ca6SStefan Roese CHIP 11 errata where the last 256 bytes in SDRAM shouldn't 318014f73ca6SStefan Roese be touched. 318114f73ca6SStefan Roese 318214f73ca6SStefan Roese WARNING: Please make sure that this value is a multiple of 318314f73ca6SStefan Roese the Linux page size (normally 4k). If this is not the case, 318414f73ca6SStefan Roese then the end address of the Linux memory will be located at a 318514f73ca6SStefan Roese non page size aligned address and this could cause major 318614f73ca6SStefan Roese problems. 318714f73ca6SStefan Roese 31886d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_LOADS_BAUD_CHANGE: 3189c609719bSwdenk Enable temporary baudrate change while serial download 3190c609719bSwdenk 31916d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SDRAM_BASE: 3192c609719bSwdenk Physical start address of SDRAM. _Must_ be 0 here. 3193c609719bSwdenk 31946d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MBIO_BASE: 3195c609719bSwdenk Physical start address of Motherboard I/O (if using a 3196c609719bSwdenk Cogent motherboard) 3197c609719bSwdenk 31986d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_BASE: 3199c609719bSwdenk Physical start address of Flash memory. 3200c609719bSwdenk 32016d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MONITOR_BASE: 3202c609719bSwdenk Physical start address of boot monitor code (set by 3203c609719bSwdenk make config files to be same as the text base address 320414d0a02aSWolfgang Denk (CONFIG_SYS_TEXT_BASE) used when linking) - same as 32056d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FLASH_BASE when booting from flash. 3206c609719bSwdenk 32076d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MONITOR_LEN: 32083b57fe0aSwdenk Size of memory reserved for monitor code, used to 32093b57fe0aSwdenk determine _at_compile_time_ (!) if the environment is 32103b57fe0aSwdenk embedded within the U-Boot image, or in a separate 32113b57fe0aSwdenk flash sector. 3212c609719bSwdenk 32136d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MALLOC_LEN: 3214c609719bSwdenk Size of DRAM reserved for malloc() use. 3215c609719bSwdenk 32166d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_BOOTM_LEN: 321715940c9aSStefan Roese Normally compressed uImages are limited to an 321815940c9aSStefan Roese uncompressed size of 8 MBytes. If this is not enough, 32196d0f6bcfSJean-Christophe PLAGNIOL-VILLARD you can define CONFIG_SYS_BOOTM_LEN in your board config file 322015940c9aSStefan Roese to adjust this setting to your needs. 3221c609719bSwdenk 32226d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_BOOTMAPSZ: 3223c609719bSwdenk Maximum size of memory mapped by the startup code of 3224c609719bSwdenk the Linux kernel; all data that must be processed by 32257d721e34SBartlomiej Sieka the Linux kernel (bd_info, boot arguments, FDT blob if 32267d721e34SBartlomiej Sieka used) must be put below this limit, unless "bootm_low" 32277d721e34SBartlomiej Sieka enviroment variable is defined and non-zero. In such case 32287d721e34SBartlomiej Sieka all data for the Linux kernel must be between "bootm_low" 3229c3624e6eSGrant Likely and "bootm_low" + CONFIG_SYS_BOOTMAPSZ. The environment 3230c3624e6eSGrant Likely variable "bootm_mapsize" will override the value of 3231c3624e6eSGrant Likely CONFIG_SYS_BOOTMAPSZ. If CONFIG_SYS_BOOTMAPSZ is undefined, 3232c3624e6eSGrant Likely then the value in "bootm_size" will be used instead. 3233c609719bSwdenk 3234fca43cc8SJohn Rigby- CONFIG_SYS_BOOT_RAMDISK_HIGH: 3235fca43cc8SJohn Rigby Enable initrd_high functionality. If defined then the 3236fca43cc8SJohn Rigby initrd_high feature is enabled and the bootm ramdisk subcommand 3237fca43cc8SJohn Rigby is enabled. 3238fca43cc8SJohn Rigby 3239fca43cc8SJohn Rigby- CONFIG_SYS_BOOT_GET_CMDLINE: 3240fca43cc8SJohn Rigby Enables allocating and saving kernel cmdline in space between 3241fca43cc8SJohn Rigby "bootm_low" and "bootm_low" + BOOTMAPSZ. 3242fca43cc8SJohn Rigby 3243fca43cc8SJohn Rigby- CONFIG_SYS_BOOT_GET_KBD: 3244fca43cc8SJohn Rigby Enables allocating and saving a kernel copy of the bd_info in 3245fca43cc8SJohn Rigby space between "bootm_low" and "bootm_low" + BOOTMAPSZ. 3246fca43cc8SJohn Rigby 32476d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAX_FLASH_BANKS: 3248c609719bSwdenk Max number of Flash memory banks 3249c609719bSwdenk 32506d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAX_FLASH_SECT: 3251c609719bSwdenk Max number of sectors on a Flash chip 3252c609719bSwdenk 32536d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_ERASE_TOUT: 3254c609719bSwdenk Timeout for Flash erase operations (in ms) 3255c609719bSwdenk 32566d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_WRITE_TOUT: 3257c609719bSwdenk Timeout for Flash write operations (in ms) 3258c609719bSwdenk 32596d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_LOCK_TOUT 32608564acf9Swdenk Timeout for Flash set sector lock bit operation (in ms) 32618564acf9Swdenk 32626d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_UNLOCK_TOUT 32638564acf9Swdenk Timeout for Flash clear lock bits operation (in ms) 32648564acf9Swdenk 32656d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_PROTECTION 32668564acf9Swdenk If defined, hardware flash sectors protection is used 32678564acf9Swdenk instead of U-Boot software protection. 32688564acf9Swdenk 32696d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_DIRECT_FLASH_TFTP: 3270c609719bSwdenk 3271c609719bSwdenk Enable TFTP transfers directly to flash memory; 3272c609719bSwdenk without this option such a download has to be 3273c609719bSwdenk performed in two steps: (1) download to RAM, and (2) 3274c609719bSwdenk copy from RAM to flash. 3275c609719bSwdenk 3276c609719bSwdenk The two-step approach is usually more reliable, since 3277c609719bSwdenk you can check if the download worked before you erase 327811ccc33fSMarcel Ziswiler the flash, but in some situations (when system RAM is 327911ccc33fSMarcel Ziswiler too limited to allow for a temporary copy of the 3280c609719bSwdenk downloaded image) this option may be very useful. 3281c609719bSwdenk 32826d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_CFI: 3283c609719bSwdenk Define if the flash driver uses extra elements in the 32845653fc33Swdenk common flash structure for storing flash geometry. 32855653fc33Swdenk 328600b1883aSJean-Christophe PLAGNIOL-VILLARD- CONFIG_FLASH_CFI_DRIVER 32875653fc33Swdenk This option also enables the building of the cfi_flash driver 32885653fc33Swdenk in the drivers directory 328953cf9435Sstroese 329091809ed5SPiotr Ziecik- CONFIG_FLASH_CFI_MTD 329191809ed5SPiotr Ziecik This option enables the building of the cfi_mtd driver 329291809ed5SPiotr Ziecik in the drivers directory. The driver exports CFI flash 329391809ed5SPiotr Ziecik to the MTD layer. 329491809ed5SPiotr Ziecik 32956d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_USE_BUFFER_WRITE 329696ef831fSGuennadi Liakhovetski Use buffered writes to flash. 329796ef831fSGuennadi Liakhovetski 329896ef831fSGuennadi Liakhovetski- CONFIG_FLASH_SPANSION_S29WS_N 329996ef831fSGuennadi Liakhovetski s29ws-n MirrorBit flash has non-standard addresses for buffered 330096ef831fSGuennadi Liakhovetski write commands. 330196ef831fSGuennadi Liakhovetski 33026d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_QUIET_TEST 33035568e613SStefan Roese If this option is defined, the common CFI flash doesn't 33045568e613SStefan Roese print it's warning upon not recognized FLASH banks. This 33055568e613SStefan Roese is useful, if some of the configured banks are only 33065568e613SStefan Roese optionally available. 33075568e613SStefan Roese 33089a042e9cSJerry Van Baren- CONFIG_FLASH_SHOW_PROGRESS 33099a042e9cSJerry Van Baren If defined (must be an integer), print out countdown 33109a042e9cSJerry Van Baren digits and dots. Recommended value: 45 (9..1) for 80 33119a042e9cSJerry Van Baren column displays, 15 (3..1) for 40 column displays. 33129a042e9cSJerry Van Baren 3313352ef3f1SStefan Roese- CONFIG_FLASH_VERIFY 3314352ef3f1SStefan Roese If defined, the content of the flash (destination) is compared 3315352ef3f1SStefan Roese against the source after the write operation. An error message 3316352ef3f1SStefan Roese will be printed when the contents are not identical. 3317352ef3f1SStefan Roese Please note that this option is useless in nearly all cases, 3318352ef3f1SStefan Roese since such flash programming errors usually are detected earlier 3319352ef3f1SStefan Roese while unprotecting/erasing/programming. Please only enable 3320352ef3f1SStefan Roese this option if you really know what you are doing. 3321352ef3f1SStefan Roese 33226d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_RX_ETH_BUFFER: 332311ccc33fSMarcel Ziswiler Defines the number of Ethernet receive buffers. On some 332411ccc33fSMarcel Ziswiler Ethernet controllers it is recommended to set this value 332553cf9435Sstroese to 8 or even higher (EEPRO100 or 405 EMAC), since all 332653cf9435Sstroese buffers can be full shortly after enabling the interface 332711ccc33fSMarcel Ziswiler on high Ethernet traffic. 332853cf9435Sstroese Defaults to 4 if not defined. 3329c609719bSwdenk 3330ea882bafSWolfgang Denk- CONFIG_ENV_MAX_ENTRIES 3331ea882bafSWolfgang Denk 3332ea882bafSWolfgang Denk Maximum number of entries in the hash table that is used 3333ea882bafSWolfgang Denk internally to store the environment settings. The default 3334ea882bafSWolfgang Denk setting is supposed to be generous and should work in most 3335ea882bafSWolfgang Denk cases. This setting can be used to tune behaviour; see 3336ea882bafSWolfgang Denk lib/hashtable.c for details. 3337ea882bafSWolfgang Denk 33382598090bSJoe Hershberger- CONFIG_ENV_FLAGS_LIST_DEFAULT 33392598090bSJoe Hershberger- CONFIG_ENV_FLAGS_LIST_STATIC 33402598090bSJoe Hershberger Enable validation of the values given to enviroment variables when 33412598090bSJoe Hershberger calling env set. Variables can be restricted to only decimal, 33422598090bSJoe Hershberger hexadecimal, or boolean. If CONFIG_CMD_NET is also defined, 33432598090bSJoe Hershberger the variables can also be restricted to IP address or MAC address. 33442598090bSJoe Hershberger 33452598090bSJoe Hershberger The format of the list is: 33462598090bSJoe Hershberger type_attribute = [s|d|x|b|i|m] 3347267541f7SJoe Hershberger access_atribute = [a|r|o|c] 3348267541f7SJoe Hershberger attributes = type_attribute[access_atribute] 33492598090bSJoe Hershberger entry = variable_name[:attributes] 33502598090bSJoe Hershberger list = entry[,list] 33512598090bSJoe Hershberger 33522598090bSJoe Hershberger The type attributes are: 33532598090bSJoe Hershberger s - String (default) 33542598090bSJoe Hershberger d - Decimal 33552598090bSJoe Hershberger x - Hexadecimal 33562598090bSJoe Hershberger b - Boolean ([1yYtT|0nNfF]) 33572598090bSJoe Hershberger i - IP address 33582598090bSJoe Hershberger m - MAC address 33592598090bSJoe Hershberger 3360267541f7SJoe Hershberger The access attributes are: 3361267541f7SJoe Hershberger a - Any (default) 3362267541f7SJoe Hershberger r - Read-only 3363267541f7SJoe Hershberger o - Write-once 3364267541f7SJoe Hershberger c - Change-default 3365267541f7SJoe Hershberger 33662598090bSJoe Hershberger - CONFIG_ENV_FLAGS_LIST_DEFAULT 33672598090bSJoe Hershberger Define this to a list (string) to define the ".flags" 33682598090bSJoe Hershberger envirnoment variable in the default or embedded environment. 33692598090bSJoe Hershberger 33702598090bSJoe Hershberger - CONFIG_ENV_FLAGS_LIST_STATIC 33712598090bSJoe Hershberger Define this to a list (string) to define validation that 33722598090bSJoe Hershberger should be done if an entry is not found in the ".flags" 33732598090bSJoe Hershberger environment variable. To override a setting in the static 33742598090bSJoe Hershberger list, simply add an entry for the same variable name to the 33752598090bSJoe Hershberger ".flags" variable. 33762598090bSJoe Hershberger 3377267541f7SJoe Hershberger- CONFIG_ENV_ACCESS_IGNORE_FORCE 3378267541f7SJoe Hershberger If defined, don't allow the -f switch to env set override variable 3379267541f7SJoe Hershberger access flags. 3380267541f7SJoe Hershberger 33815c1a7ea6SSimon Glass- CONFIG_SYS_GENERIC_BOARD 33825c1a7ea6SSimon Glass This selects the architecture-generic board system instead of the 33835c1a7ea6SSimon Glass architecture-specific board files. It is intended to move boards 33845c1a7ea6SSimon Glass to this new framework over time. Defining this will disable the 33855c1a7ea6SSimon Glass arch/foo/lib/board.c file and use common/board_f.c and 33865c1a7ea6SSimon Glass common/board_r.c instead. To use this option your architecture 33875c1a7ea6SSimon Glass must support it (i.e. must define __HAVE_ARCH_GENERIC_BOARD in 33885c1a7ea6SSimon Glass its config.mk file). If you find problems enabling this option on 33895c1a7ea6SSimon Glass your board please report the problem and send patches! 33905c1a7ea6SSimon Glass 3391632efa74SSimon Glass- CONFIG_SYS_SYM_OFFSETS 3392632efa74SSimon Glass This is set by architectures that use offsets for link symbols 3393632efa74SSimon Glass instead of absolute values. So bss_start is obtained using an 3394632efa74SSimon Glass offset _bss_start_ofs from CONFIG_SYS_TEXT_BASE, rather than 3395632efa74SSimon Glass directly. You should not need to touch this setting. 3396632efa74SSimon Glass 33970b1b60c7SLokesh Vutla- CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only) 33980b1b60c7SLokesh Vutla This is set by OMAP boards for the max time that reset should 33990b1b60c7SLokesh Vutla be asserted. See doc/README.omap-reset-time for details on how 34000b1b60c7SLokesh Vutla the value can be calulated on a given board. 3401632efa74SSimon Glass 3402c609719bSwdenkThe following definitions that deal with the placement and management 3403c609719bSwdenkof environment data (variable area); in general, we support the 3404c609719bSwdenkfollowing configurations: 3405c609719bSwdenk 3406c3eb3fe4SMike Frysinger- CONFIG_BUILD_ENVCRC: 3407c3eb3fe4SMike Frysinger 3408c3eb3fe4SMike Frysinger Builds up envcrc with the target environment so that external utils 3409c3eb3fe4SMike Frysinger may easily extract it and embed it in final U-Boot images. 3410c3eb3fe4SMike Frysinger 34115a1aceb0SJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_FLASH: 3412c609719bSwdenk 3413c609719bSwdenk Define this if the environment is in flash memory. 3414c609719bSwdenk 3415c609719bSwdenk a) The environment occupies one whole flash sector, which is 3416c609719bSwdenk "embedded" in the text segment with the U-Boot code. This 3417c609719bSwdenk happens usually with "bottom boot sector" or "top boot 3418c609719bSwdenk sector" type flash chips, which have several smaller 3419c609719bSwdenk sectors at the start or the end. For instance, such a 3420c609719bSwdenk layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In 3421c609719bSwdenk such a case you would place the environment in one of the 3422c609719bSwdenk 4 kB sectors - with U-Boot code before and after it. With 3423c609719bSwdenk "top boot sector" type flash chips, you would put the 3424c609719bSwdenk environment in one of the last sectors, leaving a gap 3425c609719bSwdenk between U-Boot and the environment. 3426c609719bSwdenk 34270e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_OFFSET: 3428c609719bSwdenk 3429c609719bSwdenk Offset of environment data (variable area) to the 3430c609719bSwdenk beginning of flash memory; for instance, with bottom boot 3431c609719bSwdenk type flash chips the second sector can be used: the offset 3432c609719bSwdenk for this sector is given here. 3433c609719bSwdenk 34346d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE. 3435c609719bSwdenk 34360e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_ADDR: 3437c609719bSwdenk 3438c609719bSwdenk This is just another way to specify the start address of 3439c609719bSwdenk the flash sector containing the environment (instead of 34400e8d1586SJean-Christophe PLAGNIOL-VILLARD CONFIG_ENV_OFFSET). 3441c609719bSwdenk 34420e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SECT_SIZE: 3443c609719bSwdenk 3444c609719bSwdenk Size of the sector containing the environment. 3445c609719bSwdenk 3446c609719bSwdenk 3447c609719bSwdenk b) Sometimes flash chips have few, equal sized, BIG sectors. 3448c609719bSwdenk In such a case you don't want to spend a whole sector for 3449c609719bSwdenk the environment. 3450c609719bSwdenk 34510e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SIZE: 3452c609719bSwdenk 34535a1aceb0SJean-Christophe PLAGNIOL-VILLARD If you use this in combination with CONFIG_ENV_IS_IN_FLASH 34540e8d1586SJean-Christophe PLAGNIOL-VILLARD and CONFIG_ENV_SECT_SIZE, you can specify to use only a part 3455c609719bSwdenk of this flash sector for the environment. This saves 3456c609719bSwdenk memory for the RAM copy of the environment. 3457c609719bSwdenk 3458c609719bSwdenk It may also save flash memory if you decide to use this 3459c609719bSwdenk when your environment is "embedded" within U-Boot code, 3460c609719bSwdenk since then the remainder of the flash sector could be used 3461c609719bSwdenk for U-Boot code. It should be pointed out that this is 3462c609719bSwdenk STRONGLY DISCOURAGED from a robustness point of view: 3463c609719bSwdenk updating the environment in flash makes it always 3464c609719bSwdenk necessary to erase the WHOLE sector. If something goes 3465c609719bSwdenk wrong before the contents has been restored from a copy in 3466c609719bSwdenk RAM, your target system will be dead. 3467c609719bSwdenk 34680e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_ADDR_REDUND 34690e8d1586SJean-Christophe PLAGNIOL-VILLARD CONFIG_ENV_SIZE_REDUND 3470c609719bSwdenk 3471c609719bSwdenk These settings describe a second storage area used to hold 347211ccc33fSMarcel Ziswiler a redundant copy of the environment data, so that there is 34733e38691eSwdenk a valid backup copy in case there is a power failure during 3474c609719bSwdenk a "saveenv" operation. 3475c609719bSwdenk 3476c609719bSwdenkBE CAREFUL! Any changes to the flash layout, and some changes to the 3477c609719bSwdenksource code will make it necessary to adapt <board>/u-boot.lds* 3478c609719bSwdenkaccordingly! 3479c609719bSwdenk 3480c609719bSwdenk 34819314cee6SJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_NVRAM: 3482c609719bSwdenk 3483c609719bSwdenk Define this if you have some non-volatile memory device 3484c609719bSwdenk (NVRAM, battery buffered SRAM) which you want to use for the 3485c609719bSwdenk environment. 3486c609719bSwdenk 34870e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_ADDR: 34880e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SIZE: 3489c609719bSwdenk 349011ccc33fSMarcel Ziswiler These two #defines are used to determine the memory area you 3491c609719bSwdenk want to use for environment. It is assumed that this memory 3492c609719bSwdenk can just be read and written to, without any special 3493c609719bSwdenk provision. 3494c609719bSwdenk 3495c609719bSwdenkBE CAREFUL! The first access to the environment happens quite early 3496c609719bSwdenkin U-Boot initalization (when we try to get the setting of for the 349711ccc33fSMarcel Ziswilerconsole baudrate). You *MUST* have mapped your NVRAM area then, or 3498c609719bSwdenkU-Boot will hang. 3499c609719bSwdenk 3500c609719bSwdenkPlease note that even with NVRAM we still use a copy of the 3501c609719bSwdenkenvironment in RAM: we could work on NVRAM directly, but we want to 3502c609719bSwdenkkeep settings there always unmodified except somebody uses "saveenv" 3503c609719bSwdenkto save the current settings. 3504c609719bSwdenk 3505c609719bSwdenk 3506bb1f8b4fSJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_EEPROM: 3507c609719bSwdenk 3508c609719bSwdenk Use this if you have an EEPROM or similar serial access 3509c609719bSwdenk device and a driver for it. 3510c609719bSwdenk 35110e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_OFFSET: 35120e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SIZE: 3513c609719bSwdenk 3514c609719bSwdenk These two #defines specify the offset and size of the 3515c609719bSwdenk environment area within the total memory of your EEPROM. 3516c609719bSwdenk 35176d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_I2C_EEPROM_ADDR: 3518c609719bSwdenk If defined, specified the chip address of the EEPROM device. 3519c609719bSwdenk The default address is zero. 3520c609719bSwdenk 35216d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_EEPROM_PAGE_WRITE_BITS: 3522c609719bSwdenk If defined, the number of bits used to address bytes in a 3523c609719bSwdenk single page in the EEPROM device. A 64 byte page, for example 3524c609719bSwdenk would require six bits. 3525c609719bSwdenk 35266d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS: 3527c609719bSwdenk If defined, the number of milliseconds to delay between 3528c609719bSwdenk page writes. The default is zero milliseconds. 3529c609719bSwdenk 35306d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_I2C_EEPROM_ADDR_LEN: 3531c609719bSwdenk The length in bytes of the EEPROM memory array address. Note 3532c609719bSwdenk that this is NOT the chip address length! 3533c609719bSwdenk 35346d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW: 35355cf91d6bSwdenk EEPROM chips that implement "address overflow" are ones 35365cf91d6bSwdenk like Catalyst 24WC04/08/16 which has 9/10/11 bits of 35375cf91d6bSwdenk address and the extra bits end up in the "chip address" bit 35385cf91d6bSwdenk slots. This makes a 24WC08 (1Kbyte) chip look like four 256 35395cf91d6bSwdenk byte chips. 35405cf91d6bSwdenk 35415cf91d6bSwdenk Note that we consider the length of the address field to 35425cf91d6bSwdenk still be one byte because the extra address bits are hidden 35435cf91d6bSwdenk in the chip address. 35445cf91d6bSwdenk 35456d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_EEPROM_SIZE: 3546c609719bSwdenk The size in bytes of the EEPROM device. 3547c609719bSwdenk 3548548738b4SHeiko Schocher - CONFIG_ENV_EEPROM_IS_ON_I2C 3549548738b4SHeiko Schocher define this, if you have I2C and SPI activated, and your 3550548738b4SHeiko Schocher EEPROM, which holds the environment, is on the I2C bus. 3551548738b4SHeiko Schocher 3552548738b4SHeiko Schocher - CONFIG_I2C_ENV_EEPROM_BUS 3553548738b4SHeiko Schocher if you have an Environment on an EEPROM reached over 3554548738b4SHeiko Schocher I2C muxes, you can define here, how to reach this 3555548738b4SHeiko Schocher EEPROM. For example: 3556548738b4SHeiko Schocher 3557548738b4SHeiko Schocher #define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0" 3558548738b4SHeiko Schocher 3559548738b4SHeiko Schocher EEPROM which holds the environment, is reached over 3560548738b4SHeiko Schocher a pca9547 i2c mux with address 0x70, channel 3. 3561c609719bSwdenk 3562057c849cSJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_DATAFLASH: 35635779d8d9Swdenk 35645779d8d9Swdenk Define this if you have a DataFlash memory device which you 35655779d8d9Swdenk want to use for the environment. 35665779d8d9Swdenk 35670e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_OFFSET: 35680e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_ADDR: 35690e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SIZE: 35705779d8d9Swdenk 35715779d8d9Swdenk These three #defines specify the offset and size of the 35725779d8d9Swdenk environment area within the total memory of your DataFlash placed 35735779d8d9Swdenk at the specified address. 35745779d8d9Swdenk 35750a85a9e7SLiu Gang- CONFIG_ENV_IS_IN_REMOTE: 35760a85a9e7SLiu Gang 35770a85a9e7SLiu Gang Define this if you have a remote memory space which you 35780a85a9e7SLiu Gang want to use for the local device's environment. 35790a85a9e7SLiu Gang 35800a85a9e7SLiu Gang - CONFIG_ENV_ADDR: 35810a85a9e7SLiu Gang - CONFIG_ENV_SIZE: 35820a85a9e7SLiu Gang 35830a85a9e7SLiu Gang These two #defines specify the address and size of the 35840a85a9e7SLiu Gang environment area within the remote memory space. The 35850a85a9e7SLiu Gang local device can get the environment from remote memory 3586fc54c7faSLiu Gang space by SRIO or PCIE links. 35870a85a9e7SLiu Gang 35880a85a9e7SLiu GangBE CAREFUL! For some special cases, the local device can not use 35890a85a9e7SLiu Gang"saveenv" command. For example, the local device will get the 3590fc54c7faSLiu Gangenvironment stored in a remote NOR flash by SRIO or PCIE link, 3591fc54c7faSLiu Gangbut it can not erase, write this NOR flash by SRIO or PCIE interface. 35920a85a9e7SLiu Gang 359351bfee19SJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_NAND: 359413a5695bSwdenk 359513a5695bSwdenk Define this if you have a NAND device which you want to use 359613a5695bSwdenk for the environment. 359713a5695bSwdenk 35980e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_OFFSET: 35990e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SIZE: 360013a5695bSwdenk 360113a5695bSwdenk These two #defines specify the offset and size of the environment 3602fdd813deSScott Wood area within the first NAND device. CONFIG_ENV_OFFSET must be 3603fdd813deSScott Wood aligned to an erase block boundary. 36045779d8d9Swdenk 3605fdd813deSScott Wood - CONFIG_ENV_OFFSET_REDUND (optional): 3606e443c944SMarkus Klotzbuecher 36070e8d1586SJean-Christophe PLAGNIOL-VILLARD This setting describes a second storage area of CONFIG_ENV_SIZE 3608fdd813deSScott Wood size used to hold a redundant copy of the environment data, so 3609fdd813deSScott Wood that there is a valid backup copy in case there is a power failure 3610fdd813deSScott Wood during a "saveenv" operation. CONFIG_ENV_OFFSET_RENDUND must be 3611fdd813deSScott Wood aligned to an erase block boundary. 3612e443c944SMarkus Klotzbuecher 3613fdd813deSScott Wood - CONFIG_ENV_RANGE (optional): 3614fdd813deSScott Wood 3615fdd813deSScott Wood Specifies the length of the region in which the environment 3616fdd813deSScott Wood can be written. This should be a multiple of the NAND device's 3617fdd813deSScott Wood block size. Specifying a range with more erase blocks than 3618fdd813deSScott Wood are needed to hold CONFIG_ENV_SIZE allows bad blocks within 3619fdd813deSScott Wood the range to be avoided. 3620fdd813deSScott Wood 3621fdd813deSScott Wood - CONFIG_ENV_OFFSET_OOB (optional): 3622fdd813deSScott Wood 3623fdd813deSScott Wood Enables support for dynamically retrieving the offset of the 3624fdd813deSScott Wood environment from block zero's out-of-band data. The 3625fdd813deSScott Wood "nand env.oob" command can be used to record this offset. 3626fdd813deSScott Wood Currently, CONFIG_ENV_OFFSET_REDUND is not supported when 3627fdd813deSScott Wood using CONFIG_ENV_OFFSET_OOB. 3628e443c944SMarkus Klotzbuecher 3629b74ab737SGuennadi Liakhovetski- CONFIG_NAND_ENV_DST 3630b74ab737SGuennadi Liakhovetski 3631b74ab737SGuennadi Liakhovetski Defines address in RAM to which the nand_spl code should copy the 3632b74ab737SGuennadi Liakhovetski environment. If redundant environment is used, it will be copied to 3633b74ab737SGuennadi Liakhovetski CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE. 3634b74ab737SGuennadi Liakhovetski 36352b74433fSJoe Hershberger- CONFIG_ENV_IS_IN_UBI: 36362b74433fSJoe Hershberger 36372b74433fSJoe Hershberger Define this if you have an UBI volume that you want to use for the 36382b74433fSJoe Hershberger environment. This has the benefit of wear-leveling the environment 36392b74433fSJoe Hershberger accesses, which is important on NAND. 36402b74433fSJoe Hershberger 36412b74433fSJoe Hershberger - CONFIG_ENV_UBI_PART: 36422b74433fSJoe Hershberger 36432b74433fSJoe Hershberger Define this to a string that is the mtd partition containing the UBI. 36442b74433fSJoe Hershberger 36452b74433fSJoe Hershberger - CONFIG_ENV_UBI_VOLUME: 36462b74433fSJoe Hershberger 36472b74433fSJoe Hershberger Define this to the name of the volume that you want to store the 36482b74433fSJoe Hershberger environment in. 36492b74433fSJoe Hershberger 3650785881f7SJoe Hershberger - CONFIG_ENV_UBI_VOLUME_REDUND: 3651785881f7SJoe Hershberger 3652785881f7SJoe Hershberger Define this to the name of another volume to store a second copy of 3653785881f7SJoe Hershberger the environment in. This will enable redundant environments in UBI. 3654785881f7SJoe Hershberger It is assumed that both volumes are in the same MTD partition. 3655785881f7SJoe Hershberger 36562b74433fSJoe Hershberger - CONFIG_UBI_SILENCE_MSG 36572b74433fSJoe Hershberger - CONFIG_UBIFS_SILENCE_MSG 36582b74433fSJoe Hershberger 36592b74433fSJoe Hershberger You will probably want to define these to avoid a really noisy system 36602b74433fSJoe Hershberger when storing the env in UBI. 36612b74433fSJoe Hershberger 366206e4ae5fSStephen Warren- CONFIG_ENV_IS_IN_MMC: 366306e4ae5fSStephen Warren 366406e4ae5fSStephen Warren Define this if you have an MMC device which you want to use for the 366506e4ae5fSStephen Warren environment. 366606e4ae5fSStephen Warren 366706e4ae5fSStephen Warren - CONFIG_SYS_MMC_ENV_DEV: 366806e4ae5fSStephen Warren 366906e4ae5fSStephen Warren Specifies which MMC device the environment is stored in. 367006e4ae5fSStephen Warren 367106e4ae5fSStephen Warren - CONFIG_SYS_MMC_ENV_PART (optional): 367206e4ae5fSStephen Warren 367306e4ae5fSStephen Warren Specifies which MMC partition the environment is stored in. If not 367406e4ae5fSStephen Warren set, defaults to partition 0, the user area. Common values might be 367506e4ae5fSStephen Warren 1 (first MMC boot partition), 2 (second MMC boot partition). 367606e4ae5fSStephen Warren 367706e4ae5fSStephen Warren - CONFIG_ENV_OFFSET: 367806e4ae5fSStephen Warren - CONFIG_ENV_SIZE: 367906e4ae5fSStephen Warren 368006e4ae5fSStephen Warren These two #defines specify the offset and size of the environment 368106e4ae5fSStephen Warren area within the specified MMC device. 368206e4ae5fSStephen Warren 36835c088ee8SStephen Warren If offset is positive (the usual case), it is treated as relative to 36845c088ee8SStephen Warren the start of the MMC partition. If offset is negative, it is treated 36855c088ee8SStephen Warren as relative to the end of the MMC partition. This can be useful if 36865c088ee8SStephen Warren your board may be fitted with different MMC devices, which have 36875c088ee8SStephen Warren different sizes for the MMC partitions, and you always want the 36885c088ee8SStephen Warren environment placed at the very end of the partition, to leave the 36895c088ee8SStephen Warren maximum possible space before it, to store other data. 36905c088ee8SStephen Warren 369106e4ae5fSStephen Warren These two values are in units of bytes, but must be aligned to an 369206e4ae5fSStephen Warren MMC sector boundary. 369306e4ae5fSStephen Warren 369406e4ae5fSStephen Warren - CONFIG_ENV_OFFSET_REDUND (optional): 369506e4ae5fSStephen Warren 369606e4ae5fSStephen Warren Specifies a second storage area, of CONFIG_ENV_SIZE size, used to 369706e4ae5fSStephen Warren hold a redundant copy of the environment data. This provides a 369806e4ae5fSStephen Warren valid backup copy in case the other copy is corrupted, e.g. due 369906e4ae5fSStephen Warren to a power failure during a "saveenv" operation. 370006e4ae5fSStephen Warren 37015c088ee8SStephen Warren This value may also be positive or negative; this is handled in the 37025c088ee8SStephen Warren same way as CONFIG_ENV_OFFSET. 37035c088ee8SStephen Warren 370406e4ae5fSStephen Warren This value is also in units of bytes, but must also be aligned to 370506e4ae5fSStephen Warren an MMC sector boundary. 370606e4ae5fSStephen Warren 370706e4ae5fSStephen Warren - CONFIG_ENV_SIZE_REDUND (optional): 370806e4ae5fSStephen Warren 370906e4ae5fSStephen Warren This value need not be set, even when CONFIG_ENV_OFFSET_REDUND is 371006e4ae5fSStephen Warren set. If this value is set, it must be set to the same value as 371106e4ae5fSStephen Warren CONFIG_ENV_SIZE. 371206e4ae5fSStephen Warren 37136d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SPI_INIT_OFFSET 3714c609719bSwdenk 3715c609719bSwdenk Defines offset to the initial SPI buffer area in DPRAM. The 3716c609719bSwdenk area is used at an early stage (ROM part) if the environment 3717c609719bSwdenk is configured to reside in the SPI EEPROM: We need a 520 byte 3718c609719bSwdenk scratch DPRAM area. It is used between the two initialization 3719c609719bSwdenk calls (spi_init_f() and spi_init_r()). A value of 0xB00 seems 3720c609719bSwdenk to be a good choice since it makes it far enough from the 3721c609719bSwdenk start of the data area as well as from the stack pointer. 3722c609719bSwdenk 3723e881cb56SBruce AdlerPlease note that the environment is read-only until the monitor 3724c609719bSwdenkhas been relocated to RAM and a RAM copy of the environment has been 3725cdb74977SWolfgang Denkcreated; also, when using EEPROM you will have to use getenv_f() 3726c609719bSwdenkuntil then to read environment variables. 3727c609719bSwdenk 372885ec0bccSwdenkThe environment is protected by a CRC32 checksum. Before the monitor 372985ec0bccSwdenkis relocated into RAM, as a result of a bad CRC you will be working 373085ec0bccSwdenkwith the compiled-in default environment - *silently*!!! [This is 373185ec0bccSwdenknecessary, because the first environment variable we need is the 373285ec0bccSwdenk"baudrate" setting for the console - if we have a bad CRC, we don't 373385ec0bccSwdenkhave any device yet where we could complain.] 3734c609719bSwdenk 3735c609719bSwdenkNote: once the monitor has been relocated, then it will complain if 3736c609719bSwdenkthe default environment is used; a new CRC is computed as soon as you 373785ec0bccSwdenkuse the "saveenv" command to store a valid environment. 3738c609719bSwdenk 37396d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FAULT_ECHO_LINK_DOWN: 3740fc3e2165Swdenk Echo the inverted Ethernet link state to the fault LED. 3741fc3e2165Swdenk 37426d0f6bcfSJean-Christophe PLAGNIOL-VILLARD Note: If this option is active, then CONFIG_SYS_FAULT_MII_ADDR 3743fc3e2165Swdenk also needs to be defined. 3744fc3e2165Swdenk 37456d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FAULT_MII_ADDR: 3746fc3e2165Swdenk MII address of the PHY to check for the Ethernet link state. 3747c609719bSwdenk 3748f5675aa5SRon Madrid- CONFIG_NS16550_MIN_FUNCTIONS: 3749f5675aa5SRon Madrid Define this if you desire to only have use of the NS16550_init 3750f5675aa5SRon Madrid and NS16550_putc functions for the serial driver located at 3751f5675aa5SRon Madrid drivers/serial/ns16550.c. This option is useful for saving 3752f5675aa5SRon Madrid space for already greatly restricted images, including but not 3753f5675aa5SRon Madrid limited to NAND_SPL configurations. 3754f5675aa5SRon Madrid 3755b2b92f53SSimon Glass- CONFIG_DISPLAY_BOARDINFO 3756b2b92f53SSimon Glass Display information about the board that U-Boot is running on 3757b2b92f53SSimon Glass when U-Boot starts up. The board function checkboard() is called 3758b2b92f53SSimon Glass to do this. 3759b2b92f53SSimon Glass 3760e2e3e2b1SSimon Glass- CONFIG_DISPLAY_BOARDINFO_LATE 3761e2e3e2b1SSimon Glass Similar to the previous option, but display this information 3762e2e3e2b1SSimon Glass later, once stdio is running and output goes to the LCD, if 3763e2e3e2b1SSimon Glass present. 3764e2e3e2b1SSimon Glass 3765c609719bSwdenkLow Level (hardware related) configuration options: 3766dc7c9a1aSwdenk--------------------------------------------------- 3767c609719bSwdenk 37686d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CACHELINE_SIZE: 3769c609719bSwdenk Cache Line Size of the CPU. 3770c609719bSwdenk 37716d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_DEFAULT_IMMR: 3772c609719bSwdenk Default address of the IMMR after system reset. 37732535d602Swdenk 37742535d602Swdenk Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU, 37752535d602Swdenk and RPXsuper) to be able to adjust the position of 37762535d602Swdenk the IMMR register after a reset. 3777c609719bSwdenk 3778e46fedfeSTimur Tabi- CONFIG_SYS_CCSRBAR_DEFAULT: 3779e46fedfeSTimur Tabi Default (power-on reset) physical address of CCSR on Freescale 3780e46fedfeSTimur Tabi PowerPC SOCs. 3781e46fedfeSTimur Tabi 3782e46fedfeSTimur Tabi- CONFIG_SYS_CCSRBAR: 3783e46fedfeSTimur Tabi Virtual address of CCSR. On a 32-bit build, this is typically 3784e46fedfeSTimur Tabi the same value as CONFIG_SYS_CCSRBAR_DEFAULT. 3785e46fedfeSTimur Tabi 3786e46fedfeSTimur Tabi CONFIG_SYS_DEFAULT_IMMR must also be set to this value, 3787e46fedfeSTimur Tabi for cross-platform code that uses that macro instead. 3788e46fedfeSTimur Tabi 3789e46fedfeSTimur Tabi- CONFIG_SYS_CCSRBAR_PHYS: 3790e46fedfeSTimur Tabi Physical address of CCSR. CCSR can be relocated to a new 3791e46fedfeSTimur Tabi physical address, if desired. In this case, this macro should 3792e46fedfeSTimur Tabi be set to that address. Otherwise, it should be set to the 3793e46fedfeSTimur Tabi same value as CONFIG_SYS_CCSRBAR_DEFAULT. For example, CCSR 3794e46fedfeSTimur Tabi is typically relocated on 36-bit builds. It is recommended 3795e46fedfeSTimur Tabi that this macro be defined via the _HIGH and _LOW macros: 3796e46fedfeSTimur Tabi 3797e46fedfeSTimur Tabi #define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH 3798e46fedfeSTimur Tabi * 1ull) << 32 | CONFIG_SYS_CCSRBAR_PHYS_LOW) 3799e46fedfeSTimur Tabi 3800e46fedfeSTimur Tabi- CONFIG_SYS_CCSRBAR_PHYS_HIGH: 3801e46fedfeSTimur Tabi Bits 33-36 of CONFIG_SYS_CCSRBAR_PHYS. This value is typically 3802e46fedfeSTimur Tabi either 0 (32-bit build) or 0xF (36-bit build). This macro is 3803e46fedfeSTimur Tabi used in assembly code, so it must not contain typecasts or 3804e46fedfeSTimur Tabi integer size suffixes (e.g. "ULL"). 3805e46fedfeSTimur Tabi 3806e46fedfeSTimur Tabi- CONFIG_SYS_CCSRBAR_PHYS_LOW: 3807e46fedfeSTimur Tabi Lower 32-bits of CONFIG_SYS_CCSRBAR_PHYS. This macro is 3808e46fedfeSTimur Tabi used in assembly code, so it must not contain typecasts or 3809e46fedfeSTimur Tabi integer size suffixes (e.g. "ULL"). 3810e46fedfeSTimur Tabi 3811e46fedfeSTimur Tabi- CONFIG_SYS_CCSR_DO_NOT_RELOCATE: 3812e46fedfeSTimur Tabi If this macro is defined, then CONFIG_SYS_CCSRBAR_PHYS will be 3813e46fedfeSTimur Tabi forced to a value that ensures that CCSR is not relocated. 3814e46fedfeSTimur Tabi 38157f6c2cbcSwdenk- Floppy Disk Support: 38166d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FDC_DRIVE_NUMBER 38177f6c2cbcSwdenk 38187f6c2cbcSwdenk the default drive number (default value 0) 38197f6c2cbcSwdenk 38206d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_ISA_IO_STRIDE 38217f6c2cbcSwdenk 382211ccc33fSMarcel Ziswiler defines the spacing between FDC chipset registers 38237f6c2cbcSwdenk (default value 1) 38247f6c2cbcSwdenk 38256d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_ISA_IO_OFFSET 38267f6c2cbcSwdenk 38277f6c2cbcSwdenk defines the offset of register from address. It 38287f6c2cbcSwdenk depends on which part of the data bus is connected to 382911ccc33fSMarcel Ziswiler the FDC chipset. (default value 0) 38307f6c2cbcSwdenk 38316d0f6bcfSJean-Christophe PLAGNIOL-VILLARD If CONFIG_SYS_ISA_IO_STRIDE CONFIG_SYS_ISA_IO_OFFSET and 38326d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FDC_DRIVE_NUMBER are undefined, they take their 38337f6c2cbcSwdenk default value. 38347f6c2cbcSwdenk 38356d0f6bcfSJean-Christophe PLAGNIOL-VILLARD if CONFIG_SYS_FDC_HW_INIT is defined, then the function 38367f6c2cbcSwdenk fdc_hw_init() is called at the beginning of the FDC 38377f6c2cbcSwdenk setup. fdc_hw_init() must be provided by the board 38387f6c2cbcSwdenk source code. It is used to make hardware dependant 38397f6c2cbcSwdenk initializations. 38407f6c2cbcSwdenk 38410abddf82SMacpaul Lin- CONFIG_IDE_AHB: 38420abddf82SMacpaul Lin Most IDE controllers were designed to be connected with PCI 38430abddf82SMacpaul Lin interface. Only few of them were designed for AHB interface. 38440abddf82SMacpaul Lin When software is doing ATA command and data transfer to 38450abddf82SMacpaul Lin IDE devices through IDE-AHB controller, some additional 38460abddf82SMacpaul Lin registers accessing to these kind of IDE-AHB controller 38470abddf82SMacpaul Lin is requierd. 38480abddf82SMacpaul Lin 38496d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_IMMR: Physical address of the Internal Memory. 385025d6712aSwdenk DO NOT CHANGE unless you know exactly what you're 385125d6712aSwdenk doing! (11-4) [MPC8xx/82xx systems only] 3852c609719bSwdenk 38536d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_INIT_RAM_ADDR: 3854c609719bSwdenk 38557152b1d0Swdenk Start address of memory area that can be used for 3856c609719bSwdenk initial data and stack; please note that this must be 3857c609719bSwdenk writable memory that is working WITHOUT special 3858c609719bSwdenk initialization, i. e. you CANNOT use normal RAM which 3859c609719bSwdenk will become available only after programming the 3860c609719bSwdenk memory controller and running certain initialization 3861c609719bSwdenk sequences. 3862c609719bSwdenk 3863c609719bSwdenk U-Boot uses the following memory types: 3864c609719bSwdenk - MPC8xx and MPC8260: IMMR (internal memory of the CPU) 3865c609719bSwdenk - MPC824X: data cache 3866c609719bSwdenk - PPC4xx: data cache 3867c609719bSwdenk 38686d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_GBL_DATA_OFFSET: 3869c609719bSwdenk 3870c609719bSwdenk Offset of the initial data structure in the memory 38716d0f6bcfSJean-Christophe PLAGNIOL-VILLARD area defined by CONFIG_SYS_INIT_RAM_ADDR. Usually 38726d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_GBL_DATA_OFFSET is chosen such that the initial 3873c609719bSwdenk data is located at the end of the available space 3874553f0982SWolfgang Denk (sometimes written as (CONFIG_SYS_INIT_RAM_SIZE - 38756d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_INIT_DATA_SIZE), and the initial stack is just 38766d0f6bcfSJean-Christophe PLAGNIOL-VILLARD below that area (growing from (CONFIG_SYS_INIT_RAM_ADDR + 38776d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_GBL_DATA_OFFSET) downward. 3878c609719bSwdenk 3879c609719bSwdenk Note: 3880c609719bSwdenk On the MPC824X (or other systems that use the data 3881c609719bSwdenk cache for initial memory) the address chosen for 38826d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_INIT_RAM_ADDR is basically arbitrary - it must 3883c609719bSwdenk point to an otherwise UNUSED address space between 3884c609719bSwdenk the top of RAM and the start of the PCI space. 3885c609719bSwdenk 38866d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SIUMCR: SIU Module Configuration (11-6) 3887c609719bSwdenk 38886d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SYPCR: System Protection Control (11-9) 3889c609719bSwdenk 38906d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_TBSCR: Time Base Status and Control (11-26) 3891c609719bSwdenk 38926d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PISCR: Periodic Interrupt Status and Control (11-31) 3893c609719bSwdenk 38946d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PLPRCR: PLL, Low-Power, and Reset Control Register (15-30) 3895c609719bSwdenk 38966d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SCCR: System Clock and reset Control Register (15-27) 3897c609719bSwdenk 38986d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_OR_TIMING_SDRAM: 3899c609719bSwdenk SDRAM timing 3900c609719bSwdenk 39016d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAMR_PTA: 3902c609719bSwdenk periodic timer for refresh 3903c609719bSwdenk 39046d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_DER: Debug Event Register (37-47) 3905c609719bSwdenk 39066d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- FLASH_BASE0_PRELIM, FLASH_BASE1_PRELIM, CONFIG_SYS_REMAP_OR_AM, 39076d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PRELIM_OR_AM, CONFIG_SYS_OR_TIMING_FLASH, CONFIG_SYS_OR0_REMAP, 39086d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR1_REMAP, CONFIG_SYS_OR1_PRELIM, 39096d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_BR1_PRELIM: 3910c609719bSwdenk Memory Controller Definitions: BR0/1 and OR0/1 (FLASH) 3911c609719bSwdenk 3912c609719bSwdenk- SDRAM_BASE2_PRELIM, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE, 39136d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_OR_TIMING_SDRAM, CONFIG_SYS_OR2_PRELIM, CONFIG_SYS_BR2_PRELIM, 39146d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_OR3_PRELIM, CONFIG_SYS_BR3_PRELIM: 3915c609719bSwdenk Memory Controller Definitions: BR2/3 and OR2/3 (SDRAM) 3916c609719bSwdenk 39176d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAMR_PTA, CONFIG_SYS_MPTPR_2BK_4K, CONFIG_SYS_MPTPR_1BK_4K, CONFIG_SYS_MPTPR_2BK_8K, 39186d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_MPTPR_1BK_8K, CONFIG_SYS_MAMR_8COL, CONFIG_SYS_MAMR_9COL: 3919c609719bSwdenk Machine Mode Register and Memory Periodic Timer 3920c609719bSwdenk Prescaler definitions (SDRAM timing) 3921c609719bSwdenk 39226d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_I2C_UCODE_PATCH, CONFIG_SYS_I2C_DPMEM_OFFSET [0x1FC0]: 3923c609719bSwdenk enable I2C microcode relocation patch (MPC8xx); 3924c609719bSwdenk define relocation offset in DPRAM [DSP2] 3925c609719bSwdenk 39266d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SMC_UCODE_PATCH, CONFIG_SYS_SMC_DPMEM_OFFSET [0x1FC0]: 3927b423d055SHeiko Schocher enable SMC microcode relocation patch (MPC8xx); 3928b423d055SHeiko Schocher define relocation offset in DPRAM [SMC1] 3929b423d055SHeiko Schocher 39306d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SPI_UCODE_PATCH, CONFIG_SYS_SPI_DPMEM_OFFSET [0x1FC0]: 3931c609719bSwdenk enable SPI microcode relocation patch (MPC8xx); 3932c609719bSwdenk define relocation offset in DPRAM [SCC4] 3933c609719bSwdenk 39346d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_USE_OSCCLK: 3935c609719bSwdenk Use OSCM clock mode on MBX8xx board. Be careful, 3936c609719bSwdenk wrong setting might damage your board. Read 3937c609719bSwdenk doc/README.MBX before setting this variable! 3938c609719bSwdenk 39396d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CPM_POST_WORD_ADDR: (MPC8xx, MPC8260 only) 3940ea909b76Swdenk Offset of the bootmode word in DPRAM used by post 3941ea909b76Swdenk (Power On Self Tests). This definition overrides 3942ea909b76Swdenk #define'd default value in commproc.h resp. 3943ea909b76Swdenk cpm_8260.h. 3944ea909b76Swdenk 39456d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PCI_SLV_MEM_LOCAL, CONFIG_SYS_PCI_SLV_MEM_BUS, CONFIG_SYS_PICMR0_MASK_ATTRIB, 39466d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PCI_MSTR0_LOCAL, CONFIG_SYS_PCIMSK0_MASK, CONFIG_SYS_PCI_MSTR1_LOCAL, 39476d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PCIMSK1_MASK, CONFIG_SYS_PCI_MSTR_MEM_LOCAL, CONFIG_SYS_PCI_MSTR_MEM_BUS, 39486d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_CPU_PCI_MEM_START, CONFIG_SYS_PCI_MSTR_MEM_SIZE, CONFIG_SYS_POCMR0_MASK_ATTRIB, 39496d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL, CONFIG_SYS_PCI_MSTR_MEMIO_BUS, CPU_PCI_MEMIO_START, 39506d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PCI_MSTR_MEMIO_SIZE, CONFIG_SYS_POCMR1_MASK_ATTRIB, CONFIG_SYS_PCI_MSTR_IO_LOCAL, 39516d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PCI_MSTR_IO_BUS, CONFIG_SYS_CPU_PCI_IO_START, CONFIG_SYS_PCI_MSTR_IO_SIZE, 39526d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_POCMR2_MASK_ATTRIB: (MPC826x only) 3953a47a12beSStefan Roese Overrides the default PCI memory map in arch/powerpc/cpu/mpc8260/pci.c if set. 39545d232d0eSwdenk 39559cacf4fcSDirk Eibach- CONFIG_PCI_DISABLE_PCIE: 39569cacf4fcSDirk Eibach Disable PCI-Express on systems where it is supported but not 39579cacf4fcSDirk Eibach required. 39589cacf4fcSDirk Eibach 395969fd2d3bSAndrew Sharp- CONFIG_PCI_ENUM_ONLY 396069fd2d3bSAndrew Sharp Only scan through and get the devices on the busses. 396169fd2d3bSAndrew Sharp Don't do any setup work, presumably because someone or 396269fd2d3bSAndrew Sharp something has already done it, and we don't need to do it 396369fd2d3bSAndrew Sharp a second time. Useful for platforms that are pre-booted 396469fd2d3bSAndrew Sharp by coreboot or similar. 396569fd2d3bSAndrew Sharp 3966842033e6SGabor Juhos- CONFIG_PCI_INDIRECT_BRIDGE: 3967842033e6SGabor Juhos Enable support for indirect PCI bridges. 3968842033e6SGabor Juhos 3969a09b9b68SKumar Gala- CONFIG_SYS_SRIO: 3970a09b9b68SKumar Gala Chip has SRIO or not 3971a09b9b68SKumar Gala 3972a09b9b68SKumar Gala- CONFIG_SRIO1: 3973a09b9b68SKumar Gala Board has SRIO 1 port available 3974a09b9b68SKumar Gala 3975a09b9b68SKumar Gala- CONFIG_SRIO2: 3976a09b9b68SKumar Gala Board has SRIO 2 port available 3977a09b9b68SKumar Gala 3978c8b28152SLiu Gang- CONFIG_SRIO_PCIE_BOOT_MASTER 3979c8b28152SLiu Gang Board can support master function for Boot from SRIO and PCIE 3980c8b28152SLiu Gang 3981a09b9b68SKumar Gala- CONFIG_SYS_SRIOn_MEM_VIRT: 3982a09b9b68SKumar Gala Virtual Address of SRIO port 'n' memory region 3983a09b9b68SKumar Gala 3984a09b9b68SKumar Gala- CONFIG_SYS_SRIOn_MEM_PHYS: 3985a09b9b68SKumar Gala Physical Address of SRIO port 'n' memory region 3986a09b9b68SKumar Gala 3987a09b9b68SKumar Gala- CONFIG_SYS_SRIOn_MEM_SIZE: 3988a09b9b68SKumar Gala Size of SRIO port 'n' memory region 3989a09b9b68SKumar Gala 399066bd1846SFabio Estevam- CONFIG_SYS_NAND_BUSWIDTH_16BIT 399166bd1846SFabio Estevam Defined to tell the NAND controller that the NAND chip is using 399266bd1846SFabio Estevam a 16 bit bus. 399366bd1846SFabio Estevam Not all NAND drivers use this symbol. 3994a430e916SFabio Estevam Example of drivers that use it: 399566bd1846SFabio Estevam - drivers/mtd/nand/ndfc.c 3996a430e916SFabio Estevam - drivers/mtd/nand/mxc_nand.c 3997eced4626SAlex Waterman 3998eced4626SAlex Waterman- CONFIG_SYS_NDFC_EBC0_CFG 3999eced4626SAlex Waterman Sets the EBC0_CFG register for the NDFC. If not defined 4000eced4626SAlex Waterman a default value will be used. 4001eced4626SAlex Waterman 4002bb99ad6dSBen Warren- CONFIG_SPD_EEPROM 4003218ca724SWolfgang Denk Get DDR timing information from an I2C EEPROM. Common 4004218ca724SWolfgang Denk with pluggable memory modules such as SODIMMs 4005218ca724SWolfgang Denk 4006bb99ad6dSBen Warren SPD_EEPROM_ADDRESS 4007bb99ad6dSBen Warren I2C address of the SPD EEPROM 4008bb99ad6dSBen Warren 40096d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SPD_BUS_NUM 4010218ca724SWolfgang Denk If SPD EEPROM is on an I2C bus other than the first 4011218ca724SWolfgang Denk one, specify here. Note that the value must resolve 4012218ca724SWolfgang Denk to something your driver can deal with. 4013bb99ad6dSBen Warren 40141b3e3c4fSYork Sun- CONFIG_SYS_DDR_RAW_TIMING 40151b3e3c4fSYork Sun Get DDR timing information from other than SPD. Common with 40161b3e3c4fSYork Sun soldered DDR chips onboard without SPD. DDR raw timing 40171b3e3c4fSYork Sun parameters are extracted from datasheet and hard-coded into 40181b3e3c4fSYork Sun header files or board specific files. 40191b3e3c4fSYork Sun 40206f5e1dc5SYork Sun- CONFIG_FSL_DDR_INTERACTIVE 40216f5e1dc5SYork Sun Enable interactive DDR debugging. See doc/README.fsl-ddr. 40226f5e1dc5SYork Sun 40236d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_83XX_DDR_USES_CS0 4024218ca724SWolfgang Denk Only for 83xx systems. If specified, then DDR should 4025218ca724SWolfgang Denk be configured using CS0 and CS1 instead of CS2 and CS3. 40262ad6b513STimur Tabi 4027c26e454dSwdenk- CONFIG_ETHER_ON_FEC[12] 4028c26e454dSwdenk Define to enable FEC[12] on a 8xx series processor. 4029c26e454dSwdenk 4030c26e454dSwdenk- CONFIG_FEC[12]_PHY 4031c26e454dSwdenk Define to the hardcoded PHY address which corresponds 40326e592385Swdenk to the given FEC; i. e. 4033c26e454dSwdenk #define CONFIG_FEC1_PHY 4 4034c26e454dSwdenk means that the PHY with address 4 is connected to FEC1 4035c26e454dSwdenk 4036c26e454dSwdenk When set to -1, means to probe for first available. 4037c26e454dSwdenk 4038c26e454dSwdenk- CONFIG_FEC[12]_PHY_NORXERR 4039c26e454dSwdenk The PHY does not have a RXERR line (RMII only). 4040c26e454dSwdenk (so program the FEC to ignore it). 4041c26e454dSwdenk 4042c26e454dSwdenk- CONFIG_RMII 4043c26e454dSwdenk Enable RMII mode for all FECs. 4044c26e454dSwdenk Note that this is a global option, we can't 4045c26e454dSwdenk have one FEC in standard MII mode and another in RMII mode. 4046c26e454dSwdenk 40475cf91d6bSwdenk- CONFIG_CRC32_VERIFY 40485cf91d6bSwdenk Add a verify option to the crc32 command. 40495cf91d6bSwdenk The syntax is: 40505cf91d6bSwdenk 40515cf91d6bSwdenk => crc32 -v <address> <count> <crc32> 40525cf91d6bSwdenk 40535cf91d6bSwdenk Where address/count indicate a memory area 40545cf91d6bSwdenk and crc32 is the correct crc32 which the 40555cf91d6bSwdenk area should have. 40565cf91d6bSwdenk 405756523f12Swdenk- CONFIG_LOOPW 405856523f12Swdenk Add the "loopw" memory command. This only takes effect if 4059602ad3b3SJon Loeliger the memory commands are activated globally (CONFIG_CMD_MEM). 406056523f12Swdenk 40617b466641Sstroese- CONFIG_MX_CYCLIC 40627b466641Sstroese Add the "mdc" and "mwc" memory commands. These are cyclic 40637b466641Sstroese "md/mw" commands. 40647b466641Sstroese Examples: 40657b466641Sstroese 40667b466641Sstroese => mdc.b 10 4 500 40677b466641Sstroese This command will print 4 bytes (10,11,12,13) each 500 ms. 40687b466641Sstroese 40697b466641Sstroese => mwc.l 100 12345678 10 40707b466641Sstroese This command will write 12345678 to address 100 all 10 ms. 40717b466641Sstroese 40727b466641Sstroese This only takes effect if the memory commands are activated 4073602ad3b3SJon Loeliger globally (CONFIG_CMD_MEM). 40747b466641Sstroese 40758aa1a2d1Swdenk- CONFIG_SKIP_LOWLEVEL_INIT 4076afc1ce82SMacpaul Lin [ARM, NDS32, MIPS only] If this variable is defined, then certain 4077e03f3169SWolfgang Denk low level initializations (like setting up the memory 4078e03f3169SWolfgang Denk controller) are omitted and/or U-Boot does not 4079e03f3169SWolfgang Denk relocate itself into RAM. 40808aa1a2d1Swdenk 4081e03f3169SWolfgang Denk Normally this variable MUST NOT be defined. The only 4082e03f3169SWolfgang Denk exception is when U-Boot is loaded (to RAM) by some 4083e03f3169SWolfgang Denk other boot loader or by a debugger which performs 4084e03f3169SWolfgang Denk these initializations itself. 40858aa1a2d1Swdenk 4086401bb30bSAneesh V- CONFIG_SPL_BUILD 4087df81238bSMagnus Lilja Modifies the behaviour of start.S when compiling a loader 4088df81238bSMagnus Lilja that is executed before the actual U-Boot. E.g. when 4089df81238bSMagnus Lilja compiling a NAND SPL. 4090400558b5Swdenk 4091*5df572f0SYing Zhang- CONFIG_SYS_MPC85XX_NO_RESETVEC 4092*5df572f0SYing Zhang Only for 85xx systems. If this variable is specified, the section 4093*5df572f0SYing Zhang .resetvec is not kept and the section .bootpg is placed in the 4094*5df572f0SYing Zhang previous 4k of the .text section. 4095*5df572f0SYing Zhang 40964213fc29SSimon Glass- CONFIG_ARCH_MAP_SYSMEM 40974213fc29SSimon Glass Generally U-Boot (and in particular the md command) uses 40984213fc29SSimon Glass effective address. It is therefore not necessary to regard 40994213fc29SSimon Glass U-Boot address as virtual addresses that need to be translated 41004213fc29SSimon Glass to physical addresses. However, sandbox requires this, since 41014213fc29SSimon Glass it maintains its own little RAM buffer which contains all 41024213fc29SSimon Glass addressable memory. This option causes some memory accesses 41034213fc29SSimon Glass to be mapped through map_sysmem() / unmap_sysmem(). 41044213fc29SSimon Glass 4105d8834a13SMatthias Weisser- CONFIG_USE_ARCH_MEMCPY 4106d8834a13SMatthias Weisser CONFIG_USE_ARCH_MEMSET 4107d8834a13SMatthias Weisser If these options are used a optimized version of memcpy/memset will 4108d8834a13SMatthias Weisser be used if available. These functions may be faster under some 4109d8834a13SMatthias Weisser conditions but may increase the binary size. 4110d8834a13SMatthias Weisser 4111588a13f7SSimon Glass- CONFIG_X86_RESET_VECTOR 4112588a13f7SSimon Glass If defined, the x86 reset vector code is included. This is not 4113588a13f7SSimon Glass needed when U-Boot is running from Coreboot. 4114b16f521aSGabe Black 4115fc33705eSMark Jackson- CONFIG_SYS_MPUCLK 4116fc33705eSMark Jackson Defines the MPU clock speed (in MHz). 4117fc33705eSMark Jackson 4118fc33705eSMark Jackson NOTE : currently only supported on AM335x platforms. 41195b5ece9eSGabe Black 4120f2717b47STimur TabiFreescale QE/FMAN Firmware Support: 4121f2717b47STimur Tabi----------------------------------- 4122f2717b47STimur Tabi 4123f2717b47STimur TabiThe Freescale QUICCEngine (QE) and Frame Manager (FMAN) both support the 4124f2717b47STimur Tabiloading of "firmware", which is encoded in the QE firmware binary format. 4125f2717b47STimur TabiThis firmware often needs to be loaded during U-Boot booting, so macros 4126f2717b47STimur Tabiare used to identify the storage device (NOR flash, SPI, etc) and the address 4127f2717b47STimur Tabiwithin that device. 4128f2717b47STimur Tabi 4129f2717b47STimur Tabi- CONFIG_SYS_QE_FMAN_FW_ADDR 4130f2717b47STimur Tabi The address in the storage device where the firmware is located. The 4131f2717b47STimur Tabi meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro 4132f2717b47STimur Tabi is also specified. 4133f2717b47STimur Tabi 4134f2717b47STimur Tabi- CONFIG_SYS_QE_FMAN_FW_LENGTH 4135f2717b47STimur Tabi The maximum possible size of the firmware. The firmware binary format 4136f2717b47STimur Tabi has a field that specifies the actual size of the firmware, but it 4137f2717b47STimur Tabi might not be possible to read any part of the firmware unless some 4138f2717b47STimur Tabi local storage is allocated to hold the entire firmware first. 4139f2717b47STimur Tabi 4140f2717b47STimur Tabi- CONFIG_SYS_QE_FMAN_FW_IN_NOR 4141f2717b47STimur Tabi Specifies that QE/FMAN firmware is located in NOR flash, mapped as 4142f2717b47STimur Tabi normal addressable memory via the LBC. CONFIG_SYS_FMAN_FW_ADDR is the 4143f2717b47STimur Tabi virtual address in NOR flash. 4144f2717b47STimur Tabi 4145f2717b47STimur Tabi- CONFIG_SYS_QE_FMAN_FW_IN_NAND 4146f2717b47STimur Tabi Specifies that QE/FMAN firmware is located in NAND flash. 4147f2717b47STimur Tabi CONFIG_SYS_FMAN_FW_ADDR is the offset within NAND flash. 4148f2717b47STimur Tabi 4149f2717b47STimur Tabi- CONFIG_SYS_QE_FMAN_FW_IN_MMC 4150f2717b47STimur Tabi Specifies that QE/FMAN firmware is located on the primary SD/MMC 4151f2717b47STimur Tabi device. CONFIG_SYS_FMAN_FW_ADDR is the byte offset on that device. 4152f2717b47STimur Tabi 4153f2717b47STimur Tabi- CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH 4154f2717b47STimur Tabi Specifies that QE/FMAN firmware is located on the primary SPI 4155f2717b47STimur Tabi device. CONFIG_SYS_FMAN_FW_ADDR is the byte offset on that device. 4156f2717b47STimur Tabi 4157292dc6c5SLiu Gang- CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 4158292dc6c5SLiu Gang Specifies that QE/FMAN firmware is located in the remote (master) 4159292dc6c5SLiu Gang memory space. CONFIG_SYS_FMAN_FW_ADDR is a virtual address which 4160fc54c7faSLiu Gang can be mapped from slave TLB->slave LAW->slave SRIO or PCIE outbound 4161fc54c7faSLiu Gang window->master inbound window->master LAW->the ucode address in 4162fc54c7faSLiu Gang master's memory space. 4163f2717b47STimur Tabi 4164c609719bSwdenkBuilding the Software: 4165c609719bSwdenk====================== 4166c609719bSwdenk 4167218ca724SWolfgang DenkBuilding U-Boot has been tested in several native build environments 4168218ca724SWolfgang Denkand in many different cross environments. Of course we cannot support 4169218ca724SWolfgang Denkall possibly existing versions of cross development tools in all 4170218ca724SWolfgang Denk(potentially obsolete) versions. In case of tool chain problems we 4171218ca724SWolfgang Denkrecommend to use the ELDK (see http://www.denx.de/wiki/DULG/ELDK) 4172218ca724SWolfgang Denkwhich is extensively used to build and test U-Boot. 4173c609719bSwdenk 4174218ca724SWolfgang DenkIf you are not using a native environment, it is assumed that you 4175218ca724SWolfgang Denkhave GNU cross compiling tools available in your path. In this case, 4176218ca724SWolfgang Denkyou must set the environment variable CROSS_COMPILE in your shell. 4177218ca724SWolfgang DenkNote that no changes to the Makefile or any other source files are 4178218ca724SWolfgang Denknecessary. For example using the ELDK on a 4xx CPU, please enter: 4179c609719bSwdenk 4180218ca724SWolfgang Denk $ CROSS_COMPILE=ppc_4xx- 4181218ca724SWolfgang Denk $ export CROSS_COMPILE 4182c609719bSwdenk 41832f8d396bSPeter TyserNote: If you wish to generate Windows versions of the utilities in 41842f8d396bSPeter Tyser the tools directory you can use the MinGW toolchain 41852f8d396bSPeter Tyser (http://www.mingw.org). Set your HOST tools to the MinGW 41862f8d396bSPeter Tyser toolchain and execute 'make tools'. For example: 41872f8d396bSPeter Tyser 41882f8d396bSPeter Tyser $ make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools 41892f8d396bSPeter Tyser 41902f8d396bSPeter Tyser Binaries such as tools/mkimage.exe will be created which can 41912f8d396bSPeter Tyser be executed on computers running Windows. 41922f8d396bSPeter Tyser 4193c609719bSwdenkU-Boot is intended to be simple to build. After installing the 4194c609719bSwdenksources you must configure U-Boot for one specific board type. This 4195c609719bSwdenkis done by typing: 4196c609719bSwdenk 4197c609719bSwdenk make NAME_config 4198c609719bSwdenk 4199218ca724SWolfgang Denkwhere "NAME_config" is the name of one of the existing configu- 42004d675ae6SMichael Jonesrations; see boards.cfg for supported names. 420154387ac9Swdenk 4202c609719bSwdenkNote: for some board special configuration names may exist; check if 4203c609719bSwdenk additional information is available from the board vendor; for 42042729af9dSwdenk instance, the TQM823L systems are available without (standard) 42052729af9dSwdenk or with LCD support. You can select such additional "features" 420611ccc33fSMarcel Ziswiler when choosing the configuration, i. e. 4207c609719bSwdenk 42082729af9dSwdenk make TQM823L_config 42092729af9dSwdenk - will configure for a plain TQM823L, i. e. no LCD support 4210c609719bSwdenk 4211c609719bSwdenk make TQM823L_LCD_config 4212c609719bSwdenk - will configure for a TQM823L with U-Boot console on LCD 4213c609719bSwdenk 4214c609719bSwdenk etc. 4215c609719bSwdenk 4216c609719bSwdenk 4217c609719bSwdenkFinally, type "make all", and you should get some working U-Boot 42187152b1d0Swdenkimages ready for download to / installation on your system: 4219c609719bSwdenk 4220c609719bSwdenk- "u-boot.bin" is a raw binary image 4221c609719bSwdenk- "u-boot" is an image in ELF binary format 4222c609719bSwdenk- "u-boot.srec" is in Motorola S-Record format 4223c609719bSwdenk 4224baf31249SMarian BalakowiczBy default the build is performed locally and the objects are saved 4225baf31249SMarian Balakowiczin the source directory. One of the two methods can be used to change 4226baf31249SMarian Balakowiczthis behavior and build U-Boot to some external directory: 4227baf31249SMarian Balakowicz 4228baf31249SMarian Balakowicz1. Add O= to the make command line invocations: 4229baf31249SMarian Balakowicz 4230baf31249SMarian Balakowicz make O=/tmp/build distclean 4231baf31249SMarian Balakowicz make O=/tmp/build NAME_config 4232baf31249SMarian Balakowicz make O=/tmp/build all 4233baf31249SMarian Balakowicz 4234baf31249SMarian Balakowicz2. Set environment variable BUILD_DIR to point to the desired location: 4235baf31249SMarian Balakowicz 4236baf31249SMarian Balakowicz export BUILD_DIR=/tmp/build 4237baf31249SMarian Balakowicz make distclean 4238baf31249SMarian Balakowicz make NAME_config 4239baf31249SMarian Balakowicz make all 4240baf31249SMarian Balakowicz 4241baf31249SMarian BalakowiczNote that the command line "O=" setting overrides the BUILD_DIR environment 4242baf31249SMarian Balakowiczvariable. 4243baf31249SMarian Balakowicz 4244c609719bSwdenk 4245c609719bSwdenkPlease be aware that the Makefiles assume you are using GNU make, so 4246c609719bSwdenkfor instance on NetBSD you might need to use "gmake" instead of 4247c609719bSwdenknative "make". 4248c609719bSwdenk 4249c609719bSwdenk 4250c609719bSwdenkIf the system board that you have is not listed, then you will need 4251c609719bSwdenkto port U-Boot to your hardware platform. To do this, follow these 4252c609719bSwdenksteps: 4253c609719bSwdenk 4254c609719bSwdenk1. Add a new configuration option for your board to the toplevel 42554d675ae6SMichael Jones "boards.cfg" file, using the existing entries as examples. 42564d675ae6SMichael Jones Follow the instructions there to keep the boards in order. 4257c609719bSwdenk2. Create a new directory to hold your board specific code. Add any 425885ec0bccSwdenk files you need. In your board directory, you will need at least 425985ec0bccSwdenk the "Makefile", a "<board>.c", "flash.c" and "u-boot.lds". 426085ec0bccSwdenk3. Create a new configuration file "include/configs/<board>.h" for 426185ec0bccSwdenk your board 4262c609719bSwdenk3. If you're porting U-Boot to a new CPU, then also create a new 4263c609719bSwdenk directory to hold your CPU specific code. Add any files you need. 426485ec0bccSwdenk4. Run "make <board>_config" with your new name. 4265c609719bSwdenk5. Type "make", and you should get a working "u-boot.srec" file 4266c609719bSwdenk to be installed on your target system. 426785ec0bccSwdenk6. Debug and solve any problems that might arise. 4268c609719bSwdenk [Of course, this last step is much harder than it sounds.] 4269c609719bSwdenk 4270c609719bSwdenk 4271c609719bSwdenkTesting of U-Boot Modifications, Ports to New Hardware, etc.: 4272c609719bSwdenk============================================================== 4273c609719bSwdenk 4274c609719bSwdenkIf you have modified U-Boot sources (for instance added a new board 4275c609719bSwdenkor support for new devices, a new CPU, etc.) you are expected to 4276c609719bSwdenkprovide feedback to the other developers. The feedback normally takes 4277c609719bSwdenkthe form of a "patch", i. e. a context diff against a certain (latest 4278218ca724SWolfgang Denkofficial or latest in the git repository) version of U-Boot sources. 4279c609719bSwdenk 4280c609719bSwdenkBut before you submit such a patch, please verify that your modifi- 4281c609719bSwdenkcation did not break existing code. At least make sure that *ALL* of 4282c609719bSwdenkthe supported boards compile WITHOUT ANY compiler warnings. To do so, 4283c609719bSwdenkjust run the "MAKEALL" script, which will configure and build U-Boot 4284c609719bSwdenkfor ALL supported system. Be warned, this will take a while. You can 42857152b1d0Swdenkselect which (cross) compiler to use by passing a `CROSS_COMPILE' 4286218ca724SWolfgang Denkenvironment variable to the script, i. e. to use the ELDK cross tools 4287218ca724SWolfgang Denkyou can type 4288c609719bSwdenk 4289c609719bSwdenk CROSS_COMPILE=ppc_8xx- MAKEALL 4290c609719bSwdenk 4291c609719bSwdenkor to build on a native PowerPC system you can type 4292c609719bSwdenk 4293c609719bSwdenk CROSS_COMPILE=' ' MAKEALL 4294c609719bSwdenk 4295218ca724SWolfgang DenkWhen using the MAKEALL script, the default behaviour is to build 4296218ca724SWolfgang DenkU-Boot in the source directory. This location can be changed by 4297218ca724SWolfgang Denksetting the BUILD_DIR environment variable. Also, for each target 4298218ca724SWolfgang Denkbuilt, the MAKEALL script saves two log files (<target>.ERR and 4299218ca724SWolfgang Denk<target>.MAKEALL) in the <source dir>/LOG directory. This default 4300218ca724SWolfgang Denklocation can be changed by setting the MAKEALL_LOGDIR environment 4301218ca724SWolfgang Denkvariable. For example: 4302baf31249SMarian Balakowicz 4303baf31249SMarian Balakowicz export BUILD_DIR=/tmp/build 4304baf31249SMarian Balakowicz export MAKEALL_LOGDIR=/tmp/log 4305baf31249SMarian Balakowicz CROSS_COMPILE=ppc_8xx- MAKEALL 4306baf31249SMarian Balakowicz 4307218ca724SWolfgang DenkWith the above settings build objects are saved in the /tmp/build, 4308218ca724SWolfgang Denklog files are saved in the /tmp/log and the source tree remains clean 4309218ca724SWolfgang Denkduring the whole build process. 4310baf31249SMarian Balakowicz 4311baf31249SMarian Balakowicz 4312c609719bSwdenkSee also "U-Boot Porting Guide" below. 4313c609719bSwdenk 4314c609719bSwdenk 4315c609719bSwdenkMonitor Commands - Overview: 4316c609719bSwdenk============================ 4317c609719bSwdenk 4318c609719bSwdenkgo - start application at address 'addr' 4319c609719bSwdenkrun - run commands in an environment variable 4320c609719bSwdenkbootm - boot application image from memory 4321c609719bSwdenkbootp - boot image via network using BootP/TFTP protocol 432244f074c7SMarek Vasutbootz - boot zImage from memory 4323c609719bSwdenktftpboot- boot image via network using TFTP protocol 4324c609719bSwdenk and env variables "ipaddr" and "serverip" 4325c609719bSwdenk (and eventually "gatewayip") 43261fb7cd49SSimon Glasstftpput - upload a file via network using TFTP protocol 4327c609719bSwdenkrarpboot- boot image via network using RARP/TFTP protocol 4328c609719bSwdenkdiskboot- boot from IDE devicebootd - boot default, i.e., run 'bootcmd' 4329c609719bSwdenkloads - load S-Record file over serial line 4330c609719bSwdenkloadb - load binary file over serial line (kermit mode) 4331c609719bSwdenkmd - memory display 4332c609719bSwdenkmm - memory modify (auto-incrementing) 4333c609719bSwdenknm - memory modify (constant address) 4334c609719bSwdenkmw - memory write (fill) 4335c609719bSwdenkcp - memory copy 4336c609719bSwdenkcmp - memory compare 4337c609719bSwdenkcrc32 - checksum calculation 43380f89c54bSPeter Tyseri2c - I2C sub-system 4339c609719bSwdenksspi - SPI utility commands 4340c609719bSwdenkbase - print or set address offset 4341c609719bSwdenkprintenv- print environment variables 4342c609719bSwdenksetenv - set environment variables 4343c609719bSwdenksaveenv - save environment variables to persistent storage 4344c609719bSwdenkprotect - enable or disable FLASH write protection 4345c609719bSwdenkerase - erase FLASH memory 4346c609719bSwdenkflinfo - print FLASH memory information 434710635afaSKarl O. Pincnand - NAND memory operations (see doc/README.nand) 4348c609719bSwdenkbdinfo - print Board Info structure 4349c609719bSwdenkiminfo - print header information for application image 4350c609719bSwdenkconinfo - print console devices and informations 4351c609719bSwdenkide - IDE sub-system 4352c609719bSwdenkloop - infinite loop on address range 435356523f12Swdenkloopw - infinite write loop on address range 4354c609719bSwdenkmtest - simple RAM test 4355c609719bSwdenkicache - enable or disable instruction cache 4356c609719bSwdenkdcache - enable or disable data cache 4357c609719bSwdenkreset - Perform RESET of the CPU 4358c609719bSwdenkecho - echo args to console 4359c609719bSwdenkversion - print monitor version 4360c609719bSwdenkhelp - print online help 4361c609719bSwdenk? - alias for 'help' 4362c609719bSwdenk 4363c609719bSwdenk 4364c609719bSwdenkMonitor Commands - Detailed Description: 4365c609719bSwdenk======================================== 4366c609719bSwdenk 4367c609719bSwdenkTODO. 4368c609719bSwdenk 4369c609719bSwdenkFor now: just type "help <command>". 4370c609719bSwdenk 4371c609719bSwdenk 4372c609719bSwdenkEnvironment Variables: 4373c609719bSwdenk====================== 4374c609719bSwdenk 4375c609719bSwdenkU-Boot supports user configuration using Environment Variables which 4376c609719bSwdenkcan be made persistent by saving to Flash memory. 4377c609719bSwdenk 4378c609719bSwdenkEnvironment Variables are set using "setenv", printed using 4379c609719bSwdenk"printenv", and saved to Flash using "saveenv". Using "setenv" 4380c609719bSwdenkwithout a value can be used to delete a variable from the 4381c609719bSwdenkenvironment. As long as you don't save the environment you are 4382c609719bSwdenkworking with an in-memory copy. In case the Flash area containing the 4383c609719bSwdenkenvironment is erased by accident, a default environment is provided. 4384c609719bSwdenk 4385c96f86eeSWolfgang DenkSome configuration options can be set using Environment Variables. 4386c96f86eeSWolfgang Denk 4387c96f86eeSWolfgang DenkList of environment variables (most likely not complete): 4388c609719bSwdenk 4389c609719bSwdenk baudrate - see CONFIG_BAUDRATE 4390c609719bSwdenk 4391c609719bSwdenk bootdelay - see CONFIG_BOOTDELAY 4392c609719bSwdenk 4393c609719bSwdenk bootcmd - see CONFIG_BOOTCOMMAND 4394c609719bSwdenk 4395c609719bSwdenk bootargs - Boot arguments when booting an RTOS image 4396c609719bSwdenk 4397c609719bSwdenk bootfile - Name of the image to load with TFTP 4398c609719bSwdenk 43997d721e34SBartlomiej Sieka bootm_low - Memory range available for image processing in the bootm 44007d721e34SBartlomiej Sieka command can be restricted. This variable is given as 44017d721e34SBartlomiej Sieka a hexadecimal number and defines lowest address allowed 44027d721e34SBartlomiej Sieka for use by the bootm command. See also "bootm_size" 44037d721e34SBartlomiej Sieka environment variable. Address defined by "bootm_low" is 44047d721e34SBartlomiej Sieka also the base of the initial memory mapping for the Linux 4405c3624e6eSGrant Likely kernel -- see the description of CONFIG_SYS_BOOTMAPSZ and 4406c3624e6eSGrant Likely bootm_mapsize. 4407c3624e6eSGrant Likely 4408c3624e6eSGrant Likely bootm_mapsize - Size of the initial memory mapping for the Linux kernel. 4409c3624e6eSGrant Likely This variable is given as a hexadecimal number and it 4410c3624e6eSGrant Likely defines the size of the memory region starting at base 4411c3624e6eSGrant Likely address bootm_low that is accessible by the Linux kernel 4412c3624e6eSGrant Likely during early boot. If unset, CONFIG_SYS_BOOTMAPSZ is used 4413c3624e6eSGrant Likely as the default value if it is defined, and bootm_size is 4414c3624e6eSGrant Likely used otherwise. 44157d721e34SBartlomiej Sieka 44167d721e34SBartlomiej Sieka bootm_size - Memory range available for image processing in the bootm 44177d721e34SBartlomiej Sieka command can be restricted. This variable is given as 44187d721e34SBartlomiej Sieka a hexadecimal number and defines the size of the region 44197d721e34SBartlomiej Sieka allowed for use by the bootm command. See also "bootm_low" 44207d721e34SBartlomiej Sieka environment variable. 44217d721e34SBartlomiej Sieka 44224bae9090SBartlomiej Sieka updatefile - Location of the software update file on a TFTP server, used 44234bae9090SBartlomiej Sieka by the automatic software update feature. Please refer to 44244bae9090SBartlomiej Sieka documentation in doc/README.update for more details. 44254bae9090SBartlomiej Sieka 4426c609719bSwdenk autoload - if set to "no" (any string beginning with 'n'), 4427c609719bSwdenk "bootp" will just load perform a lookup of the 4428c609719bSwdenk configuration from the BOOTP server, but not try to 4429c609719bSwdenk load any image using TFTP 4430c609719bSwdenk 4431c609719bSwdenk autostart - if set to "yes", an image loaded using the "bootp", 4432c609719bSwdenk "rarpboot", "tftpboot" or "diskboot" commands will 4433c609719bSwdenk be automatically started (by internally calling 4434c609719bSwdenk "bootm") 4435c609719bSwdenk 44364a6fd34bSwdenk If set to "no", a standalone image passed to the 44374a6fd34bSwdenk "bootm" command will be copied to the load address 44384a6fd34bSwdenk (and eventually uncompressed), but NOT be started. 44394a6fd34bSwdenk This can be used to load and uncompress arbitrary 44404a6fd34bSwdenk data. 44414a6fd34bSwdenk 4442a28afca5SDavid A. Long fdt_high - if set this restricts the maximum address that the 4443a28afca5SDavid A. Long flattened device tree will be copied into upon boot. 4444fa34f6b2SShawn Guo For example, if you have a system with 1 GB memory 4445fa34f6b2SShawn Guo at physical address 0x10000000, while Linux kernel 4446fa34f6b2SShawn Guo only recognizes the first 704 MB as low memory, you 4447fa34f6b2SShawn Guo may need to set fdt_high as 0x3C000000 to have the 4448fa34f6b2SShawn Guo device tree blob be copied to the maximum address 4449fa34f6b2SShawn Guo of the 704 MB low memory, so that Linux kernel can 4450fa34f6b2SShawn Guo access it during the boot procedure. 4451fa34f6b2SShawn Guo 4452a28afca5SDavid A. Long If this is set to the special value 0xFFFFFFFF then 4453a28afca5SDavid A. Long the fdt will not be copied at all on boot. For this 4454a28afca5SDavid A. Long to work it must reside in writable memory, have 4455a28afca5SDavid A. Long sufficient padding on the end of it for u-boot to 4456a28afca5SDavid A. Long add the information it needs into it, and the memory 4457a28afca5SDavid A. Long must be accessible by the kernel. 4458a28afca5SDavid A. Long 4459eea63e05SSimon Glass fdtcontroladdr- if set this is the address of the control flattened 4460eea63e05SSimon Glass device tree used by U-Boot when CONFIG_OF_CONTROL is 4461eea63e05SSimon Glass defined. 4462eea63e05SSimon Glass 446317ea1177Swdenk i2cfast - (PPC405GP|PPC405EP only) 446417ea1177Swdenk if set to 'y' configures Linux I2C driver for fast 446517ea1177Swdenk mode (400kHZ). This environment variable is used in 446617ea1177Swdenk initialization code. So, for changes to be effective 446717ea1177Swdenk it must be saved and board must be reset. 446817ea1177Swdenk 4469c609719bSwdenk initrd_high - restrict positioning of initrd images: 4470c609719bSwdenk If this variable is not set, initrd images will be 4471c609719bSwdenk copied to the highest possible address in RAM; this 4472c609719bSwdenk is usually what you want since it allows for 4473c609719bSwdenk maximum initrd size. If for some reason you want to 4474c609719bSwdenk make sure that the initrd image is loaded below the 44756d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_BOOTMAPSZ limit, you can set this environment 4476c609719bSwdenk variable to a value of "no" or "off" or "0". 4477c609719bSwdenk Alternatively, you can set it to a maximum upper 4478c609719bSwdenk address to use (U-Boot will still check that it 4479c609719bSwdenk does not overwrite the U-Boot stack and data). 4480c609719bSwdenk 4481c609719bSwdenk For instance, when you have a system with 16 MB 44827152b1d0Swdenk RAM, and want to reserve 4 MB from use by Linux, 4483c609719bSwdenk you can do this by adding "mem=12M" to the value of 4484c609719bSwdenk the "bootargs" variable. However, now you must make 44857152b1d0Swdenk sure that the initrd image is placed in the first 4486c609719bSwdenk 12 MB as well - this can be done with 4487c609719bSwdenk 4488c609719bSwdenk setenv initrd_high 00c00000 4489c609719bSwdenk 449038b99261Swdenk If you set initrd_high to 0xFFFFFFFF, this is an 449138b99261Swdenk indication to U-Boot that all addresses are legal 449238b99261Swdenk for the Linux kernel, including addresses in flash 449338b99261Swdenk memory. In this case U-Boot will NOT COPY the 449438b99261Swdenk ramdisk at all. This may be useful to reduce the 449538b99261Swdenk boot time on your system, but requires that this 449638b99261Swdenk feature is supported by your Linux kernel. 449738b99261Swdenk 4498c609719bSwdenk ipaddr - IP address; needed for tftpboot command 4499c609719bSwdenk 4500c609719bSwdenk loadaddr - Default load address for commands like "bootp", 4501dc7c9a1aSwdenk "rarpboot", "tftpboot", "loadb" or "diskboot" 4502c609719bSwdenk 4503c609719bSwdenk loads_echo - see CONFIG_LOADS_ECHO 4504c609719bSwdenk 4505c609719bSwdenk serverip - TFTP server IP address; needed for tftpboot command 4506c609719bSwdenk 4507c609719bSwdenk bootretry - see CONFIG_BOOT_RETRY_TIME 4508c609719bSwdenk 4509c609719bSwdenk bootdelaykey - see CONFIG_AUTOBOOT_DELAY_STR 4510c609719bSwdenk 4511c609719bSwdenk bootstopkey - see CONFIG_AUTOBOOT_STOP_STR 4512c609719bSwdenk 4513e2a53458SMike Frysinger ethprime - controls which interface is used first. 4514a3d991bdSwdenk 4515e2a53458SMike Frysinger ethact - controls which interface is currently active. 4516e2a53458SMike Frysinger For example you can do the following 4517a3d991bdSwdenk 451848690d80SHeiko Schocher => setenv ethact FEC 451948690d80SHeiko Schocher => ping 192.168.0.1 # traffic sent on FEC 452048690d80SHeiko Schocher => setenv ethact SCC 452148690d80SHeiko Schocher => ping 10.0.0.1 # traffic sent on SCC 4522a3d991bdSwdenk 4523e1692577SMatthias Fuchs ethrotate - When set to "no" U-Boot does not go through all 4524e1692577SMatthias Fuchs available network interfaces. 4525e1692577SMatthias Fuchs It just stays at the currently selected interface. 4526e1692577SMatthias Fuchs 4527a3d991bdSwdenk netretry - When set to "no" each network operation will 4528a3d991bdSwdenk either succeed or fail without retrying. 45296e592385Swdenk When set to "once" the network operation will 45306e592385Swdenk fail when all the available network interfaces 45316e592385Swdenk are tried once without success. 4532a3d991bdSwdenk Useful on scripts which control the retry operation 4533a3d991bdSwdenk themselves. 4534a3d991bdSwdenk 4535b4e2f89dSJean-Christophe PLAGNIOL-VILLARD npe_ucode - set load address for the NPE microcode 4536a1cf027aSJean-Christophe PLAGNIOL-VILLARD 453728cb9375SWolfgang Denk tftpsrcport - If this is set, the value is used for TFTP's 4538ecb0ccd9SWolfgang Denk UDP source port. 4539ecb0ccd9SWolfgang Denk 454028cb9375SWolfgang Denk tftpdstport - If this is set, the value is used for TFTP's UDP 454128cb9375SWolfgang Denk destination port instead of the Well Know Port 69. 454228cb9375SWolfgang Denk 4543c96f86eeSWolfgang Denk tftpblocksize - Block size to use for TFTP transfers; if not set, 4544c96f86eeSWolfgang Denk we use the TFTP server's default block size 4545c96f86eeSWolfgang Denk 4546c96f86eeSWolfgang Denk tftptimeout - Retransmission timeout for TFTP packets (in milli- 4547c96f86eeSWolfgang Denk seconds, minimum value is 1000 = 1 second). Defines 4548c96f86eeSWolfgang Denk when a packet is considered to be lost so it has to 4549c96f86eeSWolfgang Denk be retransmitted. The default is 5000 = 5 seconds. 4550c96f86eeSWolfgang Denk Lowering this value may make downloads succeed 4551c96f86eeSWolfgang Denk faster in networks with high packet loss rates or 4552c96f86eeSWolfgang Denk with unreliable TFTP servers. 4553c96f86eeSWolfgang Denk 4554a3d991bdSwdenk vlan - When set to a value < 4095 the traffic over 455511ccc33fSMarcel Ziswiler Ethernet is encapsulated/received over 802.1q 4556a3d991bdSwdenk VLAN tagged frames. 4557c609719bSwdenk 4558dc0b7b0eSJason HobbsThe following image location variables contain the location of images 4559dc0b7b0eSJason Hobbsused in booting. The "Image" column gives the role of the image and is 4560dc0b7b0eSJason Hobbsnot an environment variable name. The other columns are environment 4561dc0b7b0eSJason Hobbsvariable names. "File Name" gives the name of the file on a TFTP 4562dc0b7b0eSJason Hobbsserver, "RAM Address" gives the location in RAM the image will be 4563dc0b7b0eSJason Hobbsloaded to, and "Flash Location" gives the image's address in NOR 4564dc0b7b0eSJason Hobbsflash or offset in NAND flash. 4565dc0b7b0eSJason Hobbs 4566dc0b7b0eSJason Hobbs*Note* - these variables don't have to be defined for all boards, some 4567dc0b7b0eSJason Hobbsboards currenlty use other variables for these purposes, and some 4568dc0b7b0eSJason Hobbsboards use these variables for other purposes. 4569dc0b7b0eSJason Hobbs 4570dc0b7b0eSJason HobbsImage File Name RAM Address Flash Location 4571dc0b7b0eSJason Hobbs----- --------- ----------- -------------- 4572dc0b7b0eSJason Hobbsu-boot u-boot u-boot_addr_r u-boot_addr 4573dc0b7b0eSJason HobbsLinux kernel bootfile kernel_addr_r kernel_addr 4574dc0b7b0eSJason Hobbsdevice tree blob fdtfile fdt_addr_r fdt_addr 4575dc0b7b0eSJason Hobbsramdisk ramdiskfile ramdisk_addr_r ramdisk_addr 4576dc0b7b0eSJason Hobbs 4577c609719bSwdenkThe following environment variables may be used and automatically 4578c609719bSwdenkupdated by the network boot commands ("bootp" and "rarpboot"), 4579c609719bSwdenkdepending the information provided by your boot server: 4580c609719bSwdenk 4581c609719bSwdenk bootfile - see above 4582c609719bSwdenk dnsip - IP address of your Domain Name Server 4583fe389a82Sstroese dnsip2 - IP address of your secondary Domain Name Server 4584c609719bSwdenk gatewayip - IP address of the Gateway (Router) to use 4585c609719bSwdenk hostname - Target hostname 4586c609719bSwdenk ipaddr - see above 4587c609719bSwdenk netmask - Subnet Mask 4588c609719bSwdenk rootpath - Pathname of the root filesystem on the NFS server 4589c609719bSwdenk serverip - see above 4590c609719bSwdenk 4591c609719bSwdenk 4592c609719bSwdenkThere are two special Environment Variables: 4593c609719bSwdenk 4594c609719bSwdenk serial# - contains hardware identification information such 4595c609719bSwdenk as type string and/or serial number 4596c609719bSwdenk ethaddr - Ethernet address 4597c609719bSwdenk 4598c609719bSwdenkThese variables can be set only once (usually during manufacturing of 4599c609719bSwdenkthe board). U-Boot refuses to delete or overwrite these variables 4600c609719bSwdenkonce they have been set once. 4601c609719bSwdenk 4602c609719bSwdenk 4603c1551ea8SstroeseFurther special Environment Variables: 4604c1551ea8Sstroese 4605c1551ea8Sstroese ver - Contains the U-Boot version string as printed 4606c1551ea8Sstroese with the "version" command. This variable is 4607c1551ea8Sstroese readonly (see CONFIG_VERSION_VARIABLE). 4608c1551ea8Sstroese 4609c1551ea8Sstroese 4610c609719bSwdenkPlease note that changes to some configuration parameters may take 4611c609719bSwdenkonly effect after the next boot (yes, that's just like Windoze :-). 4612c609719bSwdenk 4613c609719bSwdenk 4614170ab110SJoe HershbergerCallback functions for environment variables: 4615170ab110SJoe Hershberger--------------------------------------------- 4616170ab110SJoe Hershberger 4617170ab110SJoe HershbergerFor some environment variables, the behavior of u-boot needs to change 4618170ab110SJoe Hershbergerwhen their values are changed. This functionailty allows functions to 4619170ab110SJoe Hershbergerbe associated with arbitrary variables. On creation, overwrite, or 4620170ab110SJoe Hershbergerdeletion, the callback will provide the opportunity for some side 4621170ab110SJoe Hershbergereffect to happen or for the change to be rejected. 4622170ab110SJoe Hershberger 4623170ab110SJoe HershbergerThe callbacks are named and associated with a function using the 4624170ab110SJoe HershbergerU_BOOT_ENV_CALLBACK macro in your board or driver code. 4625170ab110SJoe Hershberger 4626170ab110SJoe HershbergerThese callbacks are associated with variables in one of two ways. The 4627170ab110SJoe Hershbergerstatic list can be added to by defining CONFIG_ENV_CALLBACK_LIST_STATIC 4628170ab110SJoe Hershbergerin the board configuration to a string that defines a list of 4629170ab110SJoe Hershbergerassociations. The list must be in the following format: 4630170ab110SJoe Hershberger 4631170ab110SJoe Hershberger entry = variable_name[:callback_name] 4632170ab110SJoe Hershberger list = entry[,list] 4633170ab110SJoe Hershberger 4634170ab110SJoe HershbergerIf the callback name is not specified, then the callback is deleted. 4635170ab110SJoe HershbergerSpaces are also allowed anywhere in the list. 4636170ab110SJoe Hershberger 4637170ab110SJoe HershbergerCallbacks can also be associated by defining the ".callbacks" variable 4638170ab110SJoe Hershbergerwith the same list format above. Any association in ".callbacks" will 4639170ab110SJoe Hershbergeroverride any association in the static list. You can define 4640170ab110SJoe HershbergerCONFIG_ENV_CALLBACK_LIST_DEFAULT to a list (string) to define the 4641170ab110SJoe Hershberger".callbacks" envirnoment variable in the default or embedded environment. 4642170ab110SJoe Hershberger 4643170ab110SJoe Hershberger 4644f07771ccSwdenkCommand Line Parsing: 4645f07771ccSwdenk===================== 4646f07771ccSwdenk 4647f07771ccSwdenkThere are two different command line parsers available with U-Boot: 46487152b1d0Swdenkthe old "simple" one, and the much more powerful "hush" shell: 4649f07771ccSwdenk 4650f07771ccSwdenkOld, simple command line parser: 4651f07771ccSwdenk-------------------------------- 4652f07771ccSwdenk 4653f07771ccSwdenk- supports environment variables (through setenv / saveenv commands) 4654f07771ccSwdenk- several commands on one line, separated by ';' 4655fe126d8bSWolfgang Denk- variable substitution using "... ${name} ..." syntax 4656f07771ccSwdenk- special characters ('$', ';') can be escaped by prefixing with '\', 4657f07771ccSwdenk for example: 4658fe126d8bSWolfgang Denk setenv bootcmd bootm \${address} 4659f07771ccSwdenk- You can also escape text by enclosing in single apostrophes, for example: 4660f07771ccSwdenk setenv addip 'setenv bootargs $bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off' 4661f07771ccSwdenk 4662f07771ccSwdenkHush shell: 4663f07771ccSwdenk----------- 4664f07771ccSwdenk 4665f07771ccSwdenk- similar to Bourne shell, with control structures like 4666f07771ccSwdenk if...then...else...fi, for...do...done; while...do...done, 4667f07771ccSwdenk until...do...done, ... 4668f07771ccSwdenk- supports environment ("global") variables (through setenv / saveenv 4669f07771ccSwdenk commands) and local shell variables (through standard shell syntax 4670f07771ccSwdenk "name=value"); only environment variables can be used with "run" 4671f07771ccSwdenk command 4672f07771ccSwdenk 4673f07771ccSwdenkGeneral rules: 4674f07771ccSwdenk-------------- 4675f07771ccSwdenk 4676f07771ccSwdenk(1) If a command line (or an environment variable executed by a "run" 4677f07771ccSwdenk command) contains several commands separated by semicolon, and 4678f07771ccSwdenk one of these commands fails, then the remaining commands will be 4679f07771ccSwdenk executed anyway. 4680f07771ccSwdenk 4681f07771ccSwdenk(2) If you execute several variables with one call to run (i. e. 468211ccc33fSMarcel Ziswiler calling run with a list of variables as arguments), any failing 4683f07771ccSwdenk command will cause "run" to terminate, i. e. the remaining 4684f07771ccSwdenk variables are not executed. 4685f07771ccSwdenk 4686c609719bSwdenkNote for Redundant Ethernet Interfaces: 4687c609719bSwdenk======================================= 4688c609719bSwdenk 468911ccc33fSMarcel ZiswilerSome boards come with redundant Ethernet interfaces; U-Boot supports 4690c609719bSwdenksuch configurations and is capable of automatic selection of a 46917152b1d0Swdenk"working" interface when needed. MAC assignment works as follows: 4692c609719bSwdenk 4693c609719bSwdenkNetwork interfaces are numbered eth0, eth1, eth2, ... Corresponding 4694c609719bSwdenkMAC addresses can be stored in the environment as "ethaddr" (=>eth0), 4695c609719bSwdenk"eth1addr" (=>eth1), "eth2addr", ... 4696c609719bSwdenk 4697c609719bSwdenkIf the network interface stores some valid MAC address (for instance 4698c609719bSwdenkin SROM), this is used as default address if there is NO correspon- 4699c609719bSwdenkding setting in the environment; if the corresponding environment 4700c609719bSwdenkvariable is set, this overrides the settings in the card; that means: 4701c609719bSwdenk 4702c609719bSwdenko If the SROM has a valid MAC address, and there is no address in the 4703c609719bSwdenk environment, the SROM's address is used. 4704c609719bSwdenk 4705c609719bSwdenko If there is no valid address in the SROM, and a definition in the 4706c609719bSwdenk environment exists, then the value from the environment variable is 4707c609719bSwdenk used. 4708c609719bSwdenk 4709c609719bSwdenko If both the SROM and the environment contain a MAC address, and 4710c609719bSwdenk both addresses are the same, this MAC address is used. 4711c609719bSwdenk 4712c609719bSwdenko If both the SROM and the environment contain a MAC address, and the 4713c609719bSwdenk addresses differ, the value from the environment is used and a 4714c609719bSwdenk warning is printed. 4715c609719bSwdenk 4716c609719bSwdenko If neither SROM nor the environment contain a MAC address, an error 4717c609719bSwdenk is raised. 4718c609719bSwdenk 4719ecee9324SBen WarrenIf Ethernet drivers implement the 'write_hwaddr' function, valid MAC addresses 4720ecee9324SBen Warrenwill be programmed into hardware as part of the initialization process. This 4721ecee9324SBen Warrenmay be skipped by setting the appropriate 'ethmacskip' environment variable. 4722ecee9324SBen WarrenThe naming convention is as follows: 4723ecee9324SBen Warren"ethmacskip" (=>eth0), "eth1macskip" (=>eth1) etc. 4724c609719bSwdenk 4725c609719bSwdenkImage Formats: 4726c609719bSwdenk============== 4727c609719bSwdenk 47283310c549SMarian BalakowiczU-Boot is capable of booting (and performing other auxiliary operations on) 47293310c549SMarian Balakowiczimages in two formats: 47303310c549SMarian Balakowicz 47313310c549SMarian BalakowiczNew uImage format (FIT) 47323310c549SMarian Balakowicz----------------------- 47333310c549SMarian Balakowicz 47343310c549SMarian BalakowiczFlexible and powerful format based on Flattened Image Tree -- FIT (similar 47353310c549SMarian Balakowiczto Flattened Device Tree). It allows the use of images with multiple 47363310c549SMarian Balakowiczcomponents (several kernels, ramdisks, etc.), with contents protected by 47373310c549SMarian BalakowiczSHA1, MD5 or CRC32. More details are found in the doc/uImage.FIT directory. 47383310c549SMarian Balakowicz 47393310c549SMarian Balakowicz 47403310c549SMarian BalakowiczOld uImage format 47413310c549SMarian Balakowicz----------------- 47423310c549SMarian Balakowicz 47433310c549SMarian BalakowiczOld image format is based on binary files which can be basically anything, 47443310c549SMarian Balakowiczpreceded by a special header; see the definitions in include/image.h for 47453310c549SMarian Balakowiczdetails; basically, the header defines the following image properties: 4746c609719bSwdenk 4747c609719bSwdenk* Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD, 4748c609719bSwdenk 4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks, 4749f5ed9e39SPeter Tyser LynxOS, pSOS, QNX, RTEMS, INTEGRITY; 4750f5ed9e39SPeter Tyser Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS, 4751f5ed9e39SPeter Tyser INTEGRITY). 47527b64fef3SWolfgang Denk* Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86, 4753afc1ce82SMacpaul Lin IA64, MIPS, NDS32, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit; 4754afc1ce82SMacpaul Lin Currently supported: ARM, AVR32, Intel x86, MIPS, NDS32, Nios II, PowerPC). 4755c29fdfc1Swdenk* Compression Type (uncompressed, gzip, bzip2) 4756c609719bSwdenk* Load Address 4757c609719bSwdenk* Entry Point 4758c609719bSwdenk* Image Name 4759c609719bSwdenk* Image Timestamp 4760c609719bSwdenk 4761c609719bSwdenkThe header is marked by a special Magic Number, and both the header 4762c609719bSwdenkand the data portions of the image are secured against corruption by 4763c609719bSwdenkCRC32 checksums. 4764c609719bSwdenk 4765c609719bSwdenk 4766c609719bSwdenkLinux Support: 4767c609719bSwdenk============== 4768c609719bSwdenk 4769c609719bSwdenkAlthough U-Boot should support any OS or standalone application 47707152b1d0Swdenkeasily, the main focus has always been on Linux during the design of 4771c609719bSwdenkU-Boot. 4772c609719bSwdenk 4773c609719bSwdenkU-Boot includes many features that so far have been part of some 4774c609719bSwdenkspecial "boot loader" code within the Linux kernel. Also, any 4775c609719bSwdenk"initrd" images to be used are no longer part of one big Linux image; 4776c609719bSwdenkinstead, kernel and "initrd" are separate images. This implementation 47777152b1d0Swdenkserves several purposes: 4778c609719bSwdenk 4779c609719bSwdenk- the same features can be used for other OS or standalone 4780c609719bSwdenk applications (for instance: using compressed images to reduce the 4781c609719bSwdenk Flash memory footprint) 4782c609719bSwdenk 4783c609719bSwdenk- it becomes much easier to port new Linux kernel versions because 47847152b1d0Swdenk lots of low-level, hardware dependent stuff are done by U-Boot 4785c609719bSwdenk 4786c609719bSwdenk- the same Linux kernel image can now be used with different "initrd" 4787c609719bSwdenk images; of course this also means that different kernel images can 4788c609719bSwdenk be run with the same "initrd". This makes testing easier (you don't 4789c609719bSwdenk have to build a new "zImage.initrd" Linux image when you just 4790c609719bSwdenk change a file in your "initrd"). Also, a field-upgrade of the 4791c609719bSwdenk software is easier now. 4792c609719bSwdenk 4793c609719bSwdenk 4794c609719bSwdenkLinux HOWTO: 4795c609719bSwdenk============ 4796c609719bSwdenk 4797c609719bSwdenkPorting Linux to U-Boot based systems: 4798c609719bSwdenk--------------------------------------- 4799c609719bSwdenk 4800c609719bSwdenkU-Boot cannot save you from doing all the necessary modifications to 4801c609719bSwdenkconfigure the Linux device drivers for use with your target hardware 4802c609719bSwdenk(no, we don't intend to provide a full virtual machine interface to 4803c609719bSwdenkLinux :-). 4804c609719bSwdenk 4805a47a12beSStefan RoeseBut now you can ignore ALL boot loader code (in arch/powerpc/mbxboot). 4806c609719bSwdenk 4807c609719bSwdenkJust make sure your machine specific header file (for instance 4808c609719bSwdenkinclude/asm-ppc/tqm8xx.h) includes the same definition of the Board 48091dc30693SMarkus HeidelbergInformation structure as we define in include/asm-<arch>/u-boot.h, 48101dc30693SMarkus Heidelbergand make sure that your definition of IMAP_ADDR uses the same value 48116d0f6bcfSJean-Christophe PLAGNIOL-VILLARDas your U-Boot configuration in CONFIG_SYS_IMMR. 4812c609719bSwdenk 4813c609719bSwdenk 4814c609719bSwdenkConfiguring the Linux kernel: 4815c609719bSwdenk----------------------------- 4816c609719bSwdenk 4817c609719bSwdenkNo specific requirements for U-Boot. Make sure you have some root 4818c609719bSwdenkdevice (initial ramdisk, NFS) for your target system. 4819c609719bSwdenk 4820c609719bSwdenk 4821c609719bSwdenkBuilding a Linux Image: 4822c609719bSwdenk----------------------- 4823c609719bSwdenk 482424ee89b9SwdenkWith U-Boot, "normal" build targets like "zImage" or "bzImage" are 482524ee89b9Swdenknot used. If you use recent kernel source, a new build target 482624ee89b9Swdenk"uImage" will exist which automatically builds an image usable by 482724ee89b9SwdenkU-Boot. Most older kernels also have support for a "pImage" target, 482824ee89b9Swdenkwhich was introduced for our predecessor project PPCBoot and uses a 482924ee89b9Swdenk100% compatible format. 4830c609719bSwdenk 4831c609719bSwdenkExample: 4832c609719bSwdenk 4833c609719bSwdenk make TQM850L_config 4834c609719bSwdenk make oldconfig 4835c609719bSwdenk make dep 483624ee89b9Swdenk make uImage 4837c609719bSwdenk 483824ee89b9SwdenkThe "uImage" build target uses a special tool (in 'tools/mkimage') to 483924ee89b9Swdenkencapsulate a compressed Linux kernel image with header information, 484024ee89b9SwdenkCRC32 checksum etc. for use with U-Boot. This is what we are doing: 4841c609719bSwdenk 484224ee89b9Swdenk* build a standard "vmlinux" kernel image (in ELF binary format): 484324ee89b9Swdenk 484424ee89b9Swdenk* convert the kernel into a raw binary image: 484524ee89b9Swdenk 484624ee89b9Swdenk ${CROSS_COMPILE}-objcopy -O binary \ 484724ee89b9Swdenk -R .note -R .comment \ 484824ee89b9Swdenk -S vmlinux linux.bin 484924ee89b9Swdenk 485024ee89b9Swdenk* compress the binary image: 485124ee89b9Swdenk 485224ee89b9Swdenk gzip -9 linux.bin 485324ee89b9Swdenk 485424ee89b9Swdenk* package compressed binary image for U-Boot: 485524ee89b9Swdenk 485624ee89b9Swdenk mkimage -A ppc -O linux -T kernel -C gzip \ 485724ee89b9Swdenk -a 0 -e 0 -n "Linux Kernel Image" \ 485824ee89b9Swdenk -d linux.bin.gz uImage 485924ee89b9Swdenk 486024ee89b9Swdenk 486124ee89b9SwdenkThe "mkimage" tool can also be used to create ramdisk images for use 486224ee89b9Swdenkwith U-Boot, either separated from the Linux kernel image, or 486324ee89b9Swdenkcombined into one file. "mkimage" encapsulates the images with a 64 486424ee89b9Swdenkbyte header containing information about target architecture, 486524ee89b9Swdenkoperating system, image type, compression method, entry points, time 486624ee89b9Swdenkstamp, CRC32 checksums, etc. 486724ee89b9Swdenk 486824ee89b9Swdenk"mkimage" can be called in two ways: to verify existing images and 486924ee89b9Swdenkprint the header information, or to build new images. 4870c609719bSwdenk 4871c609719bSwdenkIn the first form (with "-l" option) mkimage lists the information 4872c609719bSwdenkcontained in the header of an existing U-Boot image; this includes 4873c609719bSwdenkchecksum verification: 4874c609719bSwdenk 4875c609719bSwdenk tools/mkimage -l image 4876c609719bSwdenk -l ==> list image header information 4877c609719bSwdenk 4878c609719bSwdenkThe second form (with "-d" option) is used to build a U-Boot image 4879c609719bSwdenkfrom a "data file" which is used as image payload: 4880c609719bSwdenk 4881c609719bSwdenk tools/mkimage -A arch -O os -T type -C comp -a addr -e ep \ 4882c609719bSwdenk -n name -d data_file image 4883c609719bSwdenk -A ==> set architecture to 'arch' 4884c609719bSwdenk -O ==> set operating system to 'os' 4885c609719bSwdenk -T ==> set image type to 'type' 4886c609719bSwdenk -C ==> set compression type 'comp' 4887c609719bSwdenk -a ==> set load address to 'addr' (hex) 4888c609719bSwdenk -e ==> set entry point to 'ep' (hex) 4889c609719bSwdenk -n ==> set image name to 'name' 4890c609719bSwdenk -d ==> use image data from 'datafile' 4891c609719bSwdenk 489269459791SwdenkRight now, all Linux kernels for PowerPC systems use the same load 489369459791Swdenkaddress (0x00000000), but the entry point address depends on the 489469459791Swdenkkernel version: 4895c609719bSwdenk 4896c609719bSwdenk- 2.2.x kernels have the entry point at 0x0000000C, 489724ee89b9Swdenk- 2.3.x and later kernels have the entry point at 0x00000000. 4898c609719bSwdenk 4899c609719bSwdenkSo a typical call to build a U-Boot image would read: 4900c609719bSwdenk 490124ee89b9Swdenk -> tools/mkimage -n '2.4.4 kernel for TQM850L' \ 490224ee89b9Swdenk > -A ppc -O linux -T kernel -C gzip -a 0 -e 0 \ 4903a47a12beSStefan Roese > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz \ 490424ee89b9Swdenk > examples/uImage.TQM850L 490524ee89b9Swdenk Image Name: 2.4.4 kernel for TQM850L 4906c609719bSwdenk Created: Wed Jul 19 02:34:59 2000 4907c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 4908c609719bSwdenk Data Size: 335725 Bytes = 327.86 kB = 0.32 MB 4909c609719bSwdenk Load Address: 0x00000000 491024ee89b9Swdenk Entry Point: 0x00000000 4911c609719bSwdenk 4912c609719bSwdenkTo verify the contents of the image (or check for corruption): 4913c609719bSwdenk 491424ee89b9Swdenk -> tools/mkimage -l examples/uImage.TQM850L 491524ee89b9Swdenk Image Name: 2.4.4 kernel for TQM850L 4916c609719bSwdenk Created: Wed Jul 19 02:34:59 2000 4917c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 4918c609719bSwdenk Data Size: 335725 Bytes = 327.86 kB = 0.32 MB 4919c609719bSwdenk Load Address: 0x00000000 492024ee89b9Swdenk Entry Point: 0x00000000 4921c609719bSwdenk 4922c609719bSwdenkNOTE: for embedded systems where boot time is critical you can trade 4923c609719bSwdenkspeed for memory and install an UNCOMPRESSED image instead: this 4924c609719bSwdenkneeds more space in Flash, but boots much faster since it does not 4925c609719bSwdenkneed to be uncompressed: 4926c609719bSwdenk 4927a47a12beSStefan Roese -> gunzip /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz 492824ee89b9Swdenk -> tools/mkimage -n '2.4.4 kernel for TQM850L' \ 492924ee89b9Swdenk > -A ppc -O linux -T kernel -C none -a 0 -e 0 \ 4930a47a12beSStefan Roese > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux \ 493124ee89b9Swdenk > examples/uImage.TQM850L-uncompressed 493224ee89b9Swdenk Image Name: 2.4.4 kernel for TQM850L 4933c609719bSwdenk Created: Wed Jul 19 02:34:59 2000 4934c609719bSwdenk Image Type: PowerPC Linux Kernel Image (uncompressed) 4935c609719bSwdenk Data Size: 792160 Bytes = 773.59 kB = 0.76 MB 4936c609719bSwdenk Load Address: 0x00000000 493724ee89b9Swdenk Entry Point: 0x00000000 4938c609719bSwdenk 4939c609719bSwdenk 4940c609719bSwdenkSimilar you can build U-Boot images from a 'ramdisk.image.gz' file 4941c609719bSwdenkwhen your kernel is intended to use an initial ramdisk: 4942c609719bSwdenk 4943c609719bSwdenk -> tools/mkimage -n 'Simple Ramdisk Image' \ 4944c609719bSwdenk > -A ppc -O linux -T ramdisk -C gzip \ 4945c609719bSwdenk > -d /LinuxPPC/images/SIMPLE-ramdisk.image.gz examples/simple-initrd 4946c609719bSwdenk Image Name: Simple Ramdisk Image 4947c609719bSwdenk Created: Wed Jan 12 14:01:50 2000 4948c609719bSwdenk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) 4949c609719bSwdenk Data Size: 566530 Bytes = 553.25 kB = 0.54 MB 4950c609719bSwdenk Load Address: 0x00000000 4951c609719bSwdenk Entry Point: 0x00000000 4952c609719bSwdenk 4953c609719bSwdenk 4954c609719bSwdenkInstalling a Linux Image: 4955c609719bSwdenk------------------------- 4956c609719bSwdenk 4957c609719bSwdenkTo downloading a U-Boot image over the serial (console) interface, 4958c609719bSwdenkyou must convert the image to S-Record format: 4959c609719bSwdenk 4960c609719bSwdenk objcopy -I binary -O srec examples/image examples/image.srec 4961c609719bSwdenk 4962c609719bSwdenkThe 'objcopy' does not understand the information in the U-Boot 4963c609719bSwdenkimage header, so the resulting S-Record file will be relative to 4964c609719bSwdenkaddress 0x00000000. To load it to a given address, you need to 4965c609719bSwdenkspecify the target address as 'offset' parameter with the 'loads' 4966c609719bSwdenkcommand. 4967c609719bSwdenk 4968c609719bSwdenkExample: install the image to address 0x40100000 (which on the 4969c609719bSwdenkTQM8xxL is in the first Flash bank): 4970c609719bSwdenk 4971c609719bSwdenk => erase 40100000 401FFFFF 4972c609719bSwdenk 4973c609719bSwdenk .......... done 4974c609719bSwdenk Erased 8 sectors 4975c609719bSwdenk 4976c609719bSwdenk => loads 40100000 4977c609719bSwdenk ## Ready for S-Record download ... 4978c609719bSwdenk ~>examples/image.srec 4979c609719bSwdenk 1 2 3 4 5 6 7 8 9 10 11 12 13 ... 4980c609719bSwdenk ... 4981c609719bSwdenk 15989 15990 15991 15992 4982c609719bSwdenk [file transfer complete] 4983c609719bSwdenk [connected] 4984c609719bSwdenk ## Start Addr = 0x00000000 4985c609719bSwdenk 4986c609719bSwdenk 4987c609719bSwdenkYou can check the success of the download using the 'iminfo' command; 4988c609719bSwdenkthis includes a checksum verification so you can be sure no data 4989c609719bSwdenkcorruption happened: 4990c609719bSwdenk 4991c609719bSwdenk => imi 40100000 4992c609719bSwdenk 4993c609719bSwdenk ## Checking Image at 40100000 ... 4994c609719bSwdenk Image Name: 2.2.13 for initrd on TQM850L 4995c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 4996c609719bSwdenk Data Size: 335725 Bytes = 327 kB = 0 MB 4997c609719bSwdenk Load Address: 00000000 4998c609719bSwdenk Entry Point: 0000000c 4999c609719bSwdenk Verifying Checksum ... OK 5000c609719bSwdenk 5001c609719bSwdenk 5002c609719bSwdenkBoot Linux: 5003c609719bSwdenk----------- 5004c609719bSwdenk 5005c609719bSwdenkThe "bootm" command is used to boot an application that is stored in 5006c609719bSwdenkmemory (RAM or Flash). In case of a Linux kernel image, the contents 5007c609719bSwdenkof the "bootargs" environment variable is passed to the kernel as 5008c609719bSwdenkparameters. You can check and modify this variable using the 5009c609719bSwdenk"printenv" and "setenv" commands: 5010c609719bSwdenk 5011c609719bSwdenk 5012c609719bSwdenk => printenv bootargs 5013c609719bSwdenk bootargs=root=/dev/ram 5014c609719bSwdenk 5015c609719bSwdenk => setenv bootargs root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 5016c609719bSwdenk 5017c609719bSwdenk => printenv bootargs 5018c609719bSwdenk bootargs=root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 5019c609719bSwdenk 5020c609719bSwdenk => bootm 40020000 5021c609719bSwdenk ## Booting Linux kernel at 40020000 ... 5022c609719bSwdenk Image Name: 2.2.13 for NFS on TQM850L 5023c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 5024c609719bSwdenk Data Size: 381681 Bytes = 372 kB = 0 MB 5025c609719bSwdenk Load Address: 00000000 5026c609719bSwdenk Entry Point: 0000000c 5027c609719bSwdenk Verifying Checksum ... OK 5028c609719bSwdenk Uncompressing Kernel Image ... OK 5029c609719bSwdenk Linux version 2.2.13 (wd@denx.local.net) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 19 02:35:17 MEST 2000 5030c609719bSwdenk Boot arguments: root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 5031c609719bSwdenk time_init: decrementer frequency = 187500000/60 5032c609719bSwdenk Calibrating delay loop... 49.77 BogoMIPS 5033c609719bSwdenk Memory: 15208k available (700k kernel code, 444k data, 32k init) [c0000000,c1000000] 5034c609719bSwdenk ... 5035c609719bSwdenk 503611ccc33fSMarcel ZiswilerIf you want to boot a Linux kernel with initial RAM disk, you pass 50377152b1d0Swdenkthe memory addresses of both the kernel and the initrd image (PPBCOOT 5038c609719bSwdenkformat!) to the "bootm" command: 5039c609719bSwdenk 5040c609719bSwdenk => imi 40100000 40200000 5041c609719bSwdenk 5042c609719bSwdenk ## Checking Image at 40100000 ... 5043c609719bSwdenk Image Name: 2.2.13 for initrd on TQM850L 5044c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 5045c609719bSwdenk Data Size: 335725 Bytes = 327 kB = 0 MB 5046c609719bSwdenk Load Address: 00000000 5047c609719bSwdenk Entry Point: 0000000c 5048c609719bSwdenk Verifying Checksum ... OK 5049c609719bSwdenk 5050c609719bSwdenk ## Checking Image at 40200000 ... 5051c609719bSwdenk Image Name: Simple Ramdisk Image 5052c609719bSwdenk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) 5053c609719bSwdenk Data Size: 566530 Bytes = 553 kB = 0 MB 5054c609719bSwdenk Load Address: 00000000 5055c609719bSwdenk Entry Point: 00000000 5056c609719bSwdenk Verifying Checksum ... OK 5057c609719bSwdenk 5058c609719bSwdenk => bootm 40100000 40200000 5059c609719bSwdenk ## Booting Linux kernel at 40100000 ... 5060c609719bSwdenk Image Name: 2.2.13 for initrd on TQM850L 5061c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 5062c609719bSwdenk Data Size: 335725 Bytes = 327 kB = 0 MB 5063c609719bSwdenk Load Address: 00000000 5064c609719bSwdenk Entry Point: 0000000c 5065c609719bSwdenk Verifying Checksum ... OK 5066c609719bSwdenk Uncompressing Kernel Image ... OK 5067c609719bSwdenk ## Loading RAMDisk Image at 40200000 ... 5068c609719bSwdenk Image Name: Simple Ramdisk Image 5069c609719bSwdenk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) 5070c609719bSwdenk Data Size: 566530 Bytes = 553 kB = 0 MB 5071c609719bSwdenk Load Address: 00000000 5072c609719bSwdenk Entry Point: 00000000 5073c609719bSwdenk Verifying Checksum ... OK 5074c609719bSwdenk Loading Ramdisk ... OK 5075c609719bSwdenk Linux version 2.2.13 (wd@denx.local.net) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 19 02:32:08 MEST 2000 5076c609719bSwdenk Boot arguments: root=/dev/ram 5077c609719bSwdenk time_init: decrementer frequency = 187500000/60 5078c609719bSwdenk Calibrating delay loop... 49.77 BogoMIPS 5079c609719bSwdenk ... 5080c609719bSwdenk RAMDISK: Compressed image found at block 0 5081c609719bSwdenk VFS: Mounted root (ext2 filesystem). 5082c609719bSwdenk 5083c609719bSwdenk bash# 5084c609719bSwdenk 50850267768eSMatthew McClintockBoot Linux and pass a flat device tree: 50860267768eSMatthew McClintock----------- 50870267768eSMatthew McClintock 50880267768eSMatthew McClintockFirst, U-Boot must be compiled with the appropriate defines. See the section 50890267768eSMatthew McClintocktitled "Linux Kernel Interface" above for a more in depth explanation. The 50900267768eSMatthew McClintockfollowing is an example of how to start a kernel and pass an updated 50910267768eSMatthew McClintockflat device tree: 50920267768eSMatthew McClintock 50930267768eSMatthew McClintock=> print oftaddr 50940267768eSMatthew McClintockoftaddr=0x300000 50950267768eSMatthew McClintock=> print oft 50960267768eSMatthew McClintockoft=oftrees/mpc8540ads.dtb 50970267768eSMatthew McClintock=> tftp $oftaddr $oft 50980267768eSMatthew McClintockSpeed: 1000, full duplex 50990267768eSMatthew McClintockUsing TSEC0 device 51000267768eSMatthew McClintockTFTP from server 192.168.1.1; our IP address is 192.168.1.101 51010267768eSMatthew McClintockFilename 'oftrees/mpc8540ads.dtb'. 51020267768eSMatthew McClintockLoad address: 0x300000 51030267768eSMatthew McClintockLoading: # 51040267768eSMatthew McClintockdone 51050267768eSMatthew McClintockBytes transferred = 4106 (100a hex) 51060267768eSMatthew McClintock=> tftp $loadaddr $bootfile 51070267768eSMatthew McClintockSpeed: 1000, full duplex 51080267768eSMatthew McClintockUsing TSEC0 device 51090267768eSMatthew McClintockTFTP from server 192.168.1.1; our IP address is 192.168.1.2 51100267768eSMatthew McClintockFilename 'uImage'. 51110267768eSMatthew McClintockLoad address: 0x200000 51120267768eSMatthew McClintockLoading:############ 51130267768eSMatthew McClintockdone 51140267768eSMatthew McClintockBytes transferred = 1029407 (fb51f hex) 51150267768eSMatthew McClintock=> print loadaddr 51160267768eSMatthew McClintockloadaddr=200000 51170267768eSMatthew McClintock=> print oftaddr 51180267768eSMatthew McClintockoftaddr=0x300000 51190267768eSMatthew McClintock=> bootm $loadaddr - $oftaddr 51200267768eSMatthew McClintock## Booting image at 00200000 ... 51210267768eSMatthew McClintock Image Name: Linux-2.6.17-dirty 51220267768eSMatthew McClintock Image Type: PowerPC Linux Kernel Image (gzip compressed) 51230267768eSMatthew McClintock Data Size: 1029343 Bytes = 1005.2 kB 51240267768eSMatthew McClintock Load Address: 00000000 51250267768eSMatthew McClintock Entry Point: 00000000 51260267768eSMatthew McClintock Verifying Checksum ... OK 51270267768eSMatthew McClintock Uncompressing Kernel Image ... OK 51280267768eSMatthew McClintockBooting using flat device tree at 0x300000 51290267768eSMatthew McClintockUsing MPC85xx ADS machine description 51300267768eSMatthew McClintockMemory CAM mapping: CAM0=256Mb, CAM1=256Mb, CAM2=0Mb residual: 0Mb 51310267768eSMatthew McClintock[snip] 51320267768eSMatthew McClintock 51330267768eSMatthew McClintock 51346069ff26SwdenkMore About U-Boot Image Types: 51356069ff26Swdenk------------------------------ 51366069ff26Swdenk 51376069ff26SwdenkU-Boot supports the following image types: 51386069ff26Swdenk 51396069ff26Swdenk "Standalone Programs" are directly runnable in the environment 51406069ff26Swdenk provided by U-Boot; it is expected that (if they behave 51416069ff26Swdenk well) you can continue to work in U-Boot after return from 51426069ff26Swdenk the Standalone Program. 51436069ff26Swdenk "OS Kernel Images" are usually images of some Embedded OS which 51446069ff26Swdenk will take over control completely. Usually these programs 51456069ff26Swdenk will install their own set of exception handlers, device 51466069ff26Swdenk drivers, set up the MMU, etc. - this means, that you cannot 51476069ff26Swdenk expect to re-enter U-Boot except by resetting the CPU. 51486069ff26Swdenk "RAMDisk Images" are more or less just data blocks, and their 51496069ff26Swdenk parameters (address, size) are passed to an OS kernel that is 51506069ff26Swdenk being started. 51516069ff26Swdenk "Multi-File Images" contain several images, typically an OS 51526069ff26Swdenk (Linux) kernel image and one or more data images like 51536069ff26Swdenk RAMDisks. This construct is useful for instance when you want 51546069ff26Swdenk to boot over the network using BOOTP etc., where the boot 51556069ff26Swdenk server provides just a single image file, but you want to get 51566069ff26Swdenk for instance an OS kernel and a RAMDisk image. 51576069ff26Swdenk 51586069ff26Swdenk "Multi-File Images" start with a list of image sizes, each 51596069ff26Swdenk image size (in bytes) specified by an "uint32_t" in network 51606069ff26Swdenk byte order. This list is terminated by an "(uint32_t)0". 51616069ff26Swdenk Immediately after the terminating 0 follow the images, one by 51626069ff26Swdenk one, all aligned on "uint32_t" boundaries (size rounded up to 51636069ff26Swdenk a multiple of 4 bytes). 51646069ff26Swdenk 51656069ff26Swdenk "Firmware Images" are binary images containing firmware (like 51666069ff26Swdenk U-Boot or FPGA images) which usually will be programmed to 51676069ff26Swdenk flash memory. 51686069ff26Swdenk 51696069ff26Swdenk "Script files" are command sequences that will be executed by 51706069ff26Swdenk U-Boot's command interpreter; this feature is especially 51716069ff26Swdenk useful when you configure U-Boot to use a real shell (hush) 51726069ff26Swdenk as command interpreter. 51736069ff26Swdenk 517444f074c7SMarek VasutBooting the Linux zImage: 517544f074c7SMarek Vasut------------------------- 517644f074c7SMarek Vasut 517744f074c7SMarek VasutOn some platforms, it's possible to boot Linux zImage. This is done 517844f074c7SMarek Vasutusing the "bootz" command. The syntax of "bootz" command is the same 517944f074c7SMarek Vasutas the syntax of "bootm" command. 518044f074c7SMarek Vasut 51818ac28563STom RiniNote, defining the CONFIG_SUPPORT_RAW_INITRD allows user to supply 5182017e1f3fSMarek Vasutkernel with raw initrd images. The syntax is slightly different, the 5183017e1f3fSMarek Vasutaddress of the initrd must be augmented by it's size, in the following 5184017e1f3fSMarek Vasutformat: "<initrd addres>:<initrd size>". 5185017e1f3fSMarek Vasut 5186c609719bSwdenk 5187c609719bSwdenkStandalone HOWTO: 5188c609719bSwdenk================= 5189c609719bSwdenk 5190c609719bSwdenkOne of the features of U-Boot is that you can dynamically load and 5191c609719bSwdenkrun "standalone" applications, which can use some resources of 5192c609719bSwdenkU-Boot like console I/O functions or interrupt services. 5193c609719bSwdenk 5194c609719bSwdenkTwo simple examples are included with the sources: 5195c609719bSwdenk 5196c609719bSwdenk"Hello World" Demo: 5197c609719bSwdenk------------------- 5198c609719bSwdenk 5199c609719bSwdenk'examples/hello_world.c' contains a small "Hello World" Demo 5200c609719bSwdenkapplication; it is automatically compiled when you build U-Boot. 5201c609719bSwdenkIt's configured to run at address 0x00040004, so you can play with it 5202c609719bSwdenklike that: 5203c609719bSwdenk 5204c609719bSwdenk => loads 5205c609719bSwdenk ## Ready for S-Record download ... 5206c609719bSwdenk ~>examples/hello_world.srec 5207c609719bSwdenk 1 2 3 4 5 6 7 8 9 10 11 ... 5208c609719bSwdenk [file transfer complete] 5209c609719bSwdenk [connected] 5210c609719bSwdenk ## Start Addr = 0x00040004 5211c609719bSwdenk 5212c609719bSwdenk => go 40004 Hello World! This is a test. 5213c609719bSwdenk ## Starting application at 0x00040004 ... 5214c609719bSwdenk Hello World 5215c609719bSwdenk argc = 7 5216c609719bSwdenk argv[0] = "40004" 5217c609719bSwdenk argv[1] = "Hello" 5218c609719bSwdenk argv[2] = "World!" 5219c609719bSwdenk argv[3] = "This" 5220c609719bSwdenk argv[4] = "is" 5221c609719bSwdenk argv[5] = "a" 5222c609719bSwdenk argv[6] = "test." 5223c609719bSwdenk argv[7] = "<NULL>" 5224c609719bSwdenk Hit any key to exit ... 5225c609719bSwdenk 5226c609719bSwdenk ## Application terminated, rc = 0x0 5227c609719bSwdenk 5228c609719bSwdenkAnother example, which demonstrates how to register a CPM interrupt 5229c609719bSwdenkhandler with the U-Boot code, can be found in 'examples/timer.c'. 5230c609719bSwdenkHere, a CPM timer is set up to generate an interrupt every second. 5231c609719bSwdenkThe interrupt service routine is trivial, just printing a '.' 5232c609719bSwdenkcharacter, but this is just a demo program. The application can be 5233c609719bSwdenkcontrolled by the following keys: 5234c609719bSwdenk 5235c609719bSwdenk ? - print current values og the CPM Timer registers 5236c609719bSwdenk b - enable interrupts and start timer 5237c609719bSwdenk e - stop timer and disable interrupts 5238c609719bSwdenk q - quit application 5239c609719bSwdenk 5240c609719bSwdenk => loads 5241c609719bSwdenk ## Ready for S-Record download ... 5242c609719bSwdenk ~>examples/timer.srec 5243c609719bSwdenk 1 2 3 4 5 6 7 8 9 10 11 ... 5244c609719bSwdenk [file transfer complete] 5245c609719bSwdenk [connected] 5246c609719bSwdenk ## Start Addr = 0x00040004 5247c609719bSwdenk 5248c609719bSwdenk => go 40004 5249c609719bSwdenk ## Starting application at 0x00040004 ... 5250c609719bSwdenk TIMERS=0xfff00980 5251c609719bSwdenk Using timer 1 5252c609719bSwdenk tgcr @ 0xfff00980, tmr @ 0xfff00990, trr @ 0xfff00994, tcr @ 0xfff00998, tcn @ 0xfff0099c, ter @ 0xfff009b0 5253c609719bSwdenk 5254c609719bSwdenkHit 'b': 5255c609719bSwdenk [q, b, e, ?] Set interval 1000000 us 5256c609719bSwdenk Enabling timer 5257c609719bSwdenkHit '?': 5258c609719bSwdenk [q, b, e, ?] ........ 5259c609719bSwdenk tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0xef6, ter=0x0 5260c609719bSwdenkHit '?': 5261c609719bSwdenk [q, b, e, ?] . 5262c609719bSwdenk tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x2ad4, ter=0x0 5263c609719bSwdenkHit '?': 5264c609719bSwdenk [q, b, e, ?] . 5265c609719bSwdenk tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x1efc, ter=0x0 5266c609719bSwdenkHit '?': 5267c609719bSwdenk [q, b, e, ?] . 5268c609719bSwdenk tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x169d, ter=0x0 5269c609719bSwdenkHit 'e': 5270c609719bSwdenk [q, b, e, ?] ...Stopping timer 5271c609719bSwdenkHit 'q': 5272c609719bSwdenk [q, b, e, ?] ## Application terminated, rc = 0x0 5273c609719bSwdenk 5274c609719bSwdenk 527585ec0bccSwdenkMinicom warning: 527685ec0bccSwdenk================ 527785ec0bccSwdenk 52787152b1d0SwdenkOver time, many people have reported problems when trying to use the 527985ec0bccSwdenk"minicom" terminal emulation program for serial download. I (wd) 528085ec0bccSwdenkconsider minicom to be broken, and recommend not to use it. Under 5281f07771ccSwdenkUnix, I recommend to use C-Kermit for general purpose use (and 528285ec0bccSwdenkespecially for kermit binary protocol download ("loadb" command), and 5283e53515a2SKarl O. Pincuse "cu" for S-Record download ("loads" command). See 5284e53515a2SKarl O. Pinchttp://www.denx.de/wiki/view/DULG/SystemSetup#Section_4.3. 5285e53515a2SKarl O. Pincfor help with kermit. 5286e53515a2SKarl O. Pinc 528785ec0bccSwdenk 528852f52c14SwdenkNevertheless, if you absolutely want to use it try adding this 528952f52c14Swdenkconfiguration to your "File transfer protocols" section: 529052f52c14Swdenk 529152f52c14Swdenk Name Program Name U/D FullScr IO-Red. Multi 529252f52c14Swdenk X kermit /usr/bin/kermit -i -l %l -s Y U Y N N 529352f52c14Swdenk Y kermit /usr/bin/kermit -i -l %l -r N D Y N N 529452f52c14Swdenk 529552f52c14Swdenk 5296c609719bSwdenkNetBSD Notes: 5297c609719bSwdenk============= 5298c609719bSwdenk 5299c609719bSwdenkStarting at version 0.9.2, U-Boot supports NetBSD both as host 5300c609719bSwdenk(build U-Boot) and target system (boots NetBSD/mpc8xx). 5301c609719bSwdenk 5302c609719bSwdenkBuilding requires a cross environment; it is known to work on 5303c609719bSwdenkNetBSD/i386 with the cross-powerpc-netbsd-1.3 package (you will also 5304c609719bSwdenkneed gmake since the Makefiles are not compatible with BSD make). 5305c609719bSwdenkNote that the cross-powerpc package does not install include files; 5306c609719bSwdenkattempting to build U-Boot will fail because <machine/ansi.h> is 5307c609719bSwdenkmissing. This file has to be installed and patched manually: 5308c609719bSwdenk 5309c609719bSwdenk # cd /usr/pkg/cross/powerpc-netbsd/include 5310c609719bSwdenk # mkdir powerpc 5311c609719bSwdenk # ln -s powerpc machine 5312c609719bSwdenk # cp /usr/src/sys/arch/powerpc/include/ansi.h powerpc/ansi.h 5313c609719bSwdenk # ${EDIT} powerpc/ansi.h ## must remove __va_list, _BSD_VA_LIST 5314c609719bSwdenk 5315c609719bSwdenkNative builds *don't* work due to incompatibilities between native 5316c609719bSwdenkand U-Boot include files. 5317c609719bSwdenk 5318c609719bSwdenkBooting assumes that (the first part of) the image booted is a 5319c609719bSwdenkstage-2 loader which in turn loads and then invokes the kernel 5320c609719bSwdenkproper. Loader sources will eventually appear in the NetBSD source 5321c609719bSwdenktree (probably in sys/arc/mpc8xx/stand/u-boot_stage2/); in the 53222a8af187Swdenkmeantime, see ftp://ftp.denx.de/pub/u-boot/ppcboot_stage2.tar.gz 5323c609719bSwdenk 5324c609719bSwdenk 5325c609719bSwdenkImplementation Internals: 5326c609719bSwdenk========================= 5327c609719bSwdenk 5328c609719bSwdenkThe following is not intended to be a complete description of every 5329c609719bSwdenkimplementation detail. However, it should help to understand the 5330c609719bSwdenkinner workings of U-Boot and make it easier to port it to custom 5331c609719bSwdenkhardware. 5332c609719bSwdenk 5333c609719bSwdenk 5334c609719bSwdenkInitial Stack, Global Data: 5335c609719bSwdenk--------------------------- 5336c609719bSwdenk 5337c609719bSwdenkThe implementation of U-Boot is complicated by the fact that U-Boot 5338c609719bSwdenkstarts running out of ROM (flash memory), usually without access to 5339c609719bSwdenksystem RAM (because the memory controller is not initialized yet). 5340c609719bSwdenkThis means that we don't have writable Data or BSS segments, and BSS 5341c609719bSwdenkis not initialized as zero. To be able to get a C environment working 5342c609719bSwdenkat all, we have to allocate at least a minimal stack. Implementation 5343c609719bSwdenkoptions for this are defined and restricted by the CPU used: Some CPU 5344c609719bSwdenkmodels provide on-chip memory (like the IMMR area on MPC8xx and 5345c609719bSwdenkMPC826x processors), on others (parts of) the data cache can be 5346c609719bSwdenklocked as (mis-) used as memory, etc. 5347c609719bSwdenk 53487152b1d0Swdenk Chris Hallinan posted a good summary of these issues to the 53490668236bSWolfgang Denk U-Boot mailing list: 535043d9616cSwdenk 535143d9616cSwdenk Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)? 535243d9616cSwdenk From: "Chris Hallinan" <clh@net1plus.com> 535343d9616cSwdenk Date: Mon, 10 Feb 2003 16:43:46 -0500 (22:43 MET) 535443d9616cSwdenk ... 535543d9616cSwdenk 535643d9616cSwdenk Correct me if I'm wrong, folks, but the way I understand it 535743d9616cSwdenk is this: Using DCACHE as initial RAM for Stack, etc, does not 535843d9616cSwdenk require any physical RAM backing up the cache. The cleverness 535943d9616cSwdenk is that the cache is being used as a temporary supply of 536043d9616cSwdenk necessary storage before the SDRAM controller is setup. It's 536111ccc33fSMarcel Ziswiler beyond the scope of this list to explain the details, but you 536243d9616cSwdenk can see how this works by studying the cache architecture and 536343d9616cSwdenk operation in the architecture and processor-specific manuals. 536443d9616cSwdenk 536543d9616cSwdenk OCM is On Chip Memory, which I believe the 405GP has 4K. It 536643d9616cSwdenk is another option for the system designer to use as an 536711ccc33fSMarcel Ziswiler initial stack/RAM area prior to SDRAM being available. Either 536843d9616cSwdenk option should work for you. Using CS 4 should be fine if your 536943d9616cSwdenk board designers haven't used it for something that would 537043d9616cSwdenk cause you grief during the initial boot! It is frequently not 537143d9616cSwdenk used. 537243d9616cSwdenk 53736d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_INIT_RAM_ADDR should be somewhere that won't interfere 537443d9616cSwdenk with your processor/board/system design. The default value 537543d9616cSwdenk you will find in any recent u-boot distribution in 53768a316c9bSStefan Roese walnut.h should work for you. I'd set it to a value larger 537743d9616cSwdenk than your SDRAM module. If you have a 64MB SDRAM module, set 537843d9616cSwdenk it above 400_0000. Just make sure your board has no resources 537943d9616cSwdenk that are supposed to respond to that address! That code in 538043d9616cSwdenk start.S has been around a while and should work as is when 538143d9616cSwdenk you get the config right. 538243d9616cSwdenk 538343d9616cSwdenk -Chris Hallinan 538443d9616cSwdenk DS4.COM, Inc. 538543d9616cSwdenk 5386c609719bSwdenkIt is essential to remember this, since it has some impact on the C 5387c609719bSwdenkcode for the initialization procedures: 5388c609719bSwdenk 5389c609719bSwdenk* Initialized global data (data segment) is read-only. Do not attempt 5390c609719bSwdenk to write it. 5391c609719bSwdenk 539211ccc33fSMarcel Ziswiler* Do not use any uninitialized global data (or implicitely initialized 5393c609719bSwdenk as zero data - BSS segment) at all - this is undefined, initiali- 53947152b1d0Swdenk zation is performed later (when relocating to RAM). 5395c609719bSwdenk 5396c609719bSwdenk* Stack space is very limited. Avoid big data buffers or things like 5397c609719bSwdenk that. 5398c609719bSwdenk 5399c609719bSwdenkHaving only the stack as writable memory limits means we cannot use 5400c609719bSwdenknormal global data to share information beween the code. But it 5401c609719bSwdenkturned out that the implementation of U-Boot can be greatly 5402c609719bSwdenksimplified by making a global data structure (gd_t) available to all 5403c609719bSwdenkfunctions. We could pass a pointer to this data as argument to _all_ 5404c609719bSwdenkfunctions, but this would bloat the code. Instead we use a feature of 5405c609719bSwdenkthe GCC compiler (Global Register Variables) to share the data: we 5406c609719bSwdenkplace a pointer (gd) to the global data into a register which we 5407c609719bSwdenkreserve for this purpose. 5408c609719bSwdenk 54097152b1d0SwdenkWhen choosing a register for such a purpose we are restricted by the 5410c609719bSwdenkrelevant (E)ABI specifications for the current architecture, and by 5411c609719bSwdenkGCC's implementation. 5412c609719bSwdenk 5413c609719bSwdenkFor PowerPC, the following registers have specific use: 5414c609719bSwdenk R1: stack pointer 5415e7670f6cSWolfgang Denk R2: reserved for system use 5416c609719bSwdenk R3-R4: parameter passing and return values 5417c609719bSwdenk R5-R10: parameter passing 5418c609719bSwdenk R13: small data area pointer 5419c609719bSwdenk R30: GOT pointer 5420c609719bSwdenk R31: frame pointer 5421c609719bSwdenk 5422e6bee808SJoakim Tjernlund (U-Boot also uses R12 as internal GOT pointer. r12 5423e6bee808SJoakim Tjernlund is a volatile register so r12 needs to be reset when 5424e6bee808SJoakim Tjernlund going back and forth between asm and C) 5425c609719bSwdenk 5426e7670f6cSWolfgang Denk ==> U-Boot will use R2 to hold a pointer to the global data 5427c609719bSwdenk 5428c609719bSwdenk Note: on PPC, we could use a static initializer (since the 5429c609719bSwdenk address of the global data structure is known at compile time), 5430c609719bSwdenk but it turned out that reserving a register results in somewhat 5431c609719bSwdenk smaller code - although the code savings are not that big (on 5432c609719bSwdenk average for all boards 752 bytes for the whole U-Boot image, 5433c609719bSwdenk 624 text + 127 data). 5434c609719bSwdenk 5435c4db335cSRobin GetzOn Blackfin, the normal C ABI (except for P3) is followed as documented here: 54364c58eb55SMike Frysinger http://docs.blackfin.uclinux.org/doku.php?id=application_binary_interface 54374c58eb55SMike Frysinger 5438c4db335cSRobin Getz ==> U-Boot will use P3 to hold a pointer to the global data 54394c58eb55SMike Frysinger 5440c609719bSwdenkOn ARM, the following registers are used: 5441c609719bSwdenk 5442c609719bSwdenk R0: function argument word/integer result 5443c609719bSwdenk R1-R3: function argument word 5444c609719bSwdenk R9: GOT pointer 5445c609719bSwdenk R10: stack limit (used only if stack checking if enabled) 5446c609719bSwdenk R11: argument (frame) pointer 5447c609719bSwdenk R12: temporary workspace 5448c609719bSwdenk R13: stack pointer 5449c609719bSwdenk R14: link register 5450c609719bSwdenk R15: program counter 5451c609719bSwdenk 5452c609719bSwdenk ==> U-Boot will use R8 to hold a pointer to the global data 5453c609719bSwdenk 54540df01fd3SThomas ChouOn Nios II, the ABI is documented here: 54550df01fd3SThomas Chou http://www.altera.com/literature/hb/nios2/n2cpu_nii51016.pdf 54560df01fd3SThomas Chou 54570df01fd3SThomas Chou ==> U-Boot will use gp to hold a pointer to the global data 54580df01fd3SThomas Chou 54590df01fd3SThomas Chou Note: on Nios II, we give "-G0" option to gcc and don't use gp 54600df01fd3SThomas Chou to access small data sections, so gp is free. 54610df01fd3SThomas Chou 5462afc1ce82SMacpaul LinOn NDS32, the following registers are used: 5463afc1ce82SMacpaul Lin 5464afc1ce82SMacpaul Lin R0-R1: argument/return 5465afc1ce82SMacpaul Lin R2-R5: argument 5466afc1ce82SMacpaul Lin R15: temporary register for assembler 5467afc1ce82SMacpaul Lin R16: trampoline register 5468afc1ce82SMacpaul Lin R28: frame pointer (FP) 5469afc1ce82SMacpaul Lin R29: global pointer (GP) 5470afc1ce82SMacpaul Lin R30: link register (LP) 5471afc1ce82SMacpaul Lin R31: stack pointer (SP) 5472afc1ce82SMacpaul Lin PC: program counter (PC) 5473afc1ce82SMacpaul Lin 5474afc1ce82SMacpaul Lin ==> U-Boot will use R10 to hold a pointer to the global data 5475afc1ce82SMacpaul Lin 5476d87080b7SWolfgang DenkNOTE: DECLARE_GLOBAL_DATA_PTR must be used with file-global scope, 5477d87080b7SWolfgang Denkor current versions of GCC may "optimize" the code too much. 5478c609719bSwdenk 5479c609719bSwdenkMemory Management: 5480c609719bSwdenk------------------ 5481c609719bSwdenk 5482c609719bSwdenkU-Boot runs in system state and uses physical addresses, i.e. the 5483c609719bSwdenkMMU is not used either for address mapping nor for memory protection. 5484c609719bSwdenk 5485c609719bSwdenkThe available memory is mapped to fixed addresses using the memory 5486c609719bSwdenkcontroller. In this process, a contiguous block is formed for each 5487c609719bSwdenkmemory type (Flash, SDRAM, SRAM), even when it consists of several 5488c609719bSwdenkphysical memory banks. 5489c609719bSwdenk 5490c609719bSwdenkU-Boot is installed in the first 128 kB of the first Flash bank (on 5491c609719bSwdenkTQM8xxL modules this is the range 0x40000000 ... 0x4001FFFF). After 5492c609719bSwdenkbooting and sizing and initializing DRAM, the code relocates itself 5493c609719bSwdenkto the upper end of DRAM. Immediately below the U-Boot code some 54946d0f6bcfSJean-Christophe PLAGNIOL-VILLARDmemory is reserved for use by malloc() [see CONFIG_SYS_MALLOC_LEN 5495c609719bSwdenkconfiguration setting]. Below that, a structure with global Board 5496c609719bSwdenkInfo data is placed, followed by the stack (growing downward). 5497c609719bSwdenk 5498c609719bSwdenkAdditionally, some exception handler code is copied to the low 8 kB 5499c609719bSwdenkof DRAM (0x00000000 ... 0x00001FFF). 5500c609719bSwdenk 5501c609719bSwdenkSo a typical memory configuration with 16 MB of DRAM could look like 5502c609719bSwdenkthis: 5503c609719bSwdenk 5504c609719bSwdenk 0x0000 0000 Exception Vector code 5505c609719bSwdenk : 5506c609719bSwdenk 0x0000 1FFF 5507c609719bSwdenk 0x0000 2000 Free for Application Use 5508c609719bSwdenk : 5509c609719bSwdenk : 5510c609719bSwdenk 5511c609719bSwdenk : 5512c609719bSwdenk : 5513c609719bSwdenk 0x00FB FF20 Monitor Stack (Growing downward) 5514c609719bSwdenk 0x00FB FFAC Board Info Data and permanent copy of global data 5515c609719bSwdenk 0x00FC 0000 Malloc Arena 5516c609719bSwdenk : 5517c609719bSwdenk 0x00FD FFFF 5518c609719bSwdenk 0x00FE 0000 RAM Copy of Monitor Code 5519c609719bSwdenk ... eventually: LCD or video framebuffer 5520c609719bSwdenk ... eventually: pRAM (Protected RAM - unchanged by reset) 5521c609719bSwdenk 0x00FF FFFF [End of RAM] 5522c609719bSwdenk 5523c609719bSwdenk 5524c609719bSwdenkSystem Initialization: 5525c609719bSwdenk---------------------- 5526c609719bSwdenk 5527c609719bSwdenkIn the reset configuration, U-Boot starts at the reset entry point 552811ccc33fSMarcel Ziswiler(on most PowerPC systems at address 0x00000100). Because of the reset 5529c609719bSwdenkconfiguration for CS0# this is a mirror of the onboard Flash memory. 55307152b1d0SwdenkTo be able to re-map memory U-Boot then jumps to its link address. 5531c609719bSwdenkTo be able to implement the initialization code in C, a (small!) 5532c609719bSwdenkinitial stack is set up in the internal Dual Ported RAM (in case CPUs 5533c609719bSwdenkwhich provide such a feature like MPC8xx or MPC8260), or in a locked 5534c609719bSwdenkpart of the data cache. After that, U-Boot initializes the CPU core, 5535c609719bSwdenkthe caches and the SIU. 5536c609719bSwdenk 5537c609719bSwdenkNext, all (potentially) available memory banks are mapped using a 5538c609719bSwdenkpreliminary mapping. For example, we put them on 512 MB boundaries 5539c609719bSwdenk(multiples of 0x20000000: SDRAM on 0x00000000 and 0x20000000, Flash 5540c609719bSwdenkon 0x40000000 and 0x60000000, SRAM on 0x80000000). Then UPM A is 5541c609719bSwdenkprogrammed for SDRAM access. Using the temporary configuration, a 5542c609719bSwdenksimple memory test is run that determines the size of the SDRAM 5543c609719bSwdenkbanks. 5544c609719bSwdenk 5545c609719bSwdenkWhen there is more than one SDRAM bank, and the banks are of 55467152b1d0Swdenkdifferent size, the largest is mapped first. For equal size, the first 5547c609719bSwdenkbank (CS2#) is mapped first. The first mapping is always for address 5548c609719bSwdenk0x00000000, with any additional banks following immediately to create 5549c609719bSwdenkcontiguous memory starting from 0. 5550c609719bSwdenk 5551c609719bSwdenkThen, the monitor installs itself at the upper end of the SDRAM area 5552c609719bSwdenkand allocates memory for use by malloc() and for the global Board 5553c609719bSwdenkInfo data; also, the exception vector code is copied to the low RAM 5554c609719bSwdenkpages, and the final stack is set up. 5555c609719bSwdenk 5556c609719bSwdenkOnly after this relocation will you have a "normal" C environment; 5557c609719bSwdenkuntil that you are restricted in several ways, mostly because you are 5558c609719bSwdenkrunning from ROM, and because the code will have to be relocated to a 5559c609719bSwdenknew address in RAM. 5560c609719bSwdenk 5561c609719bSwdenk 5562c609719bSwdenkU-Boot Porting Guide: 5563c609719bSwdenk---------------------- 5564c609719bSwdenk 5565c609719bSwdenk[Based on messages by Jerry Van Baren in the U-Boot-Users mailing 55666aff3115Swdenklist, October 2002] 5567c609719bSwdenk 5568c609719bSwdenk 5569c609719bSwdenkint main(int argc, char *argv[]) 5570c609719bSwdenk{ 5571c609719bSwdenk sighandler_t no_more_time; 5572c609719bSwdenk 5573c609719bSwdenk signal(SIGALRM, no_more_time); 5574c609719bSwdenk alarm(PROJECT_DEADLINE - toSec (3 * WEEK)); 5575c609719bSwdenk 5576c609719bSwdenk if (available_money > available_manpower) { 55776c3fef28SJerry Van Baren Pay consultant to port U-Boot; 5578c609719bSwdenk return 0; 5579c609719bSwdenk } 5580c609719bSwdenk 5581c609719bSwdenk Download latest U-Boot source; 5582c609719bSwdenk 55830668236bSWolfgang Denk Subscribe to u-boot mailing list; 55846aff3115Swdenk 55856c3fef28SJerry Van Baren if (clueless) 5586c609719bSwdenk email("Hi, I am new to U-Boot, how do I get started?"); 5587c609719bSwdenk 5588c609719bSwdenk while (learning) { 5589c609719bSwdenk Read the README file in the top level directory; 55907cb22f97Swdenk Read http://www.denx.de/twiki/bin/view/DULG/Manual; 55916c3fef28SJerry Van Baren Read applicable doc/*.README; 5592c609719bSwdenk Read the source, Luke; 55936c3fef28SJerry Van Baren /* find . -name "*.[chS]" | xargs grep -i <keyword> */ 5594c609719bSwdenk } 5595c609719bSwdenk 55966c3fef28SJerry Van Baren if (available_money > toLocalCurrency ($2500)) 55976c3fef28SJerry Van Baren Buy a BDI3000; 55986c3fef28SJerry Van Baren else 5599c609719bSwdenk Add a lot of aggravation and time; 5600c609719bSwdenk 56016c3fef28SJerry Van Baren if (a similar board exists) { /* hopefully... */ 56026c3fef28SJerry Van Baren cp -a board/<similar> board/<myboard> 56036c3fef28SJerry Van Baren cp include/configs/<similar>.h include/configs/<myboard>.h 56046c3fef28SJerry Van Baren } else { 5605c609719bSwdenk Create your own board support subdirectory; 56066c3fef28SJerry Van Baren Create your own board include/configs/<myboard>.h file; 56076c3fef28SJerry Van Baren } 56086c3fef28SJerry Van Baren Edit new board/<myboard> files 56096c3fef28SJerry Van Baren Edit new include/configs/<myboard>.h 5610c609719bSwdenk 56116c3fef28SJerry Van Baren while (!accepted) { 5612c609719bSwdenk while (!running) { 5613c609719bSwdenk do { 5614c609719bSwdenk Add / modify source code; 5615c609719bSwdenk } until (compiles); 5616c609719bSwdenk Debug; 5617c609719bSwdenk if (clueless) 5618c609719bSwdenk email("Hi, I am having problems..."); 5619c609719bSwdenk } 56206c3fef28SJerry Van Baren Send patch file to the U-Boot email list; 56216c3fef28SJerry Van Baren if (reasonable critiques) 56226c3fef28SJerry Van Baren Incorporate improvements from email list code review; 56236c3fef28SJerry Van Baren else 56246c3fef28SJerry Van Baren Defend code as written; 56256c3fef28SJerry Van Baren } 5626c609719bSwdenk 5627c609719bSwdenk return 0; 5628c609719bSwdenk} 5629c609719bSwdenk 5630c609719bSwdenkvoid no_more_time (int sig) 5631c609719bSwdenk{ 5632c609719bSwdenk hire_a_guru(); 5633c609719bSwdenk} 5634c609719bSwdenk 5635c609719bSwdenk 5636c609719bSwdenkCoding Standards: 5637c609719bSwdenk----------------- 5638c609719bSwdenk 5639c609719bSwdenkAll contributions to U-Boot should conform to the Linux kernel 56402c051651SDetlev Zundelcoding style; see the file "Documentation/CodingStyle" and the script 56417ca9296eSWolfgang Denk"scripts/Lindent" in your Linux kernel source directory. 5642c609719bSwdenk 56432c051651SDetlev ZundelSource files originating from a different project (for example the 56442c051651SDetlev ZundelMTD subsystem) are generally exempt from these guidelines and are not 56452c051651SDetlev Zundelreformated to ease subsequent migration to newer versions of those 56462c051651SDetlev Zundelsources. 56472c051651SDetlev Zundel 56482c051651SDetlev ZundelPlease note that U-Boot is implemented in C (and to some small parts in 56492c051651SDetlev ZundelAssembler); no C++ is used, so please do not use C++ style comments (//) 56502c051651SDetlev Zundelin your code. 5651c609719bSwdenk 5652c178d3daSwdenkPlease also stick to the following formatting rules: 5653180d3f74Swdenk- remove any trailing white space 56547ca9296eSWolfgang Denk- use TAB characters for indentation and vertical alignment, not spaces 5655180d3f74Swdenk- make sure NOT to use DOS '\r\n' line feeds 56567ca9296eSWolfgang Denk- do not add more than 2 consecutive empty lines to source files 5657180d3f74Swdenk- do not add trailing empty lines to source files 5658180d3f74Swdenk 5659c609719bSwdenkSubmissions which do not conform to the standards may be returned 5660c609719bSwdenkwith a request to reformat the changes. 5661c609719bSwdenk 5662c609719bSwdenk 5663c609719bSwdenkSubmitting Patches: 5664c609719bSwdenk------------------- 5665c609719bSwdenk 5666c609719bSwdenkSince the number of patches for U-Boot is growing, we need to 5667c609719bSwdenkestablish some rules. Submissions which do not conform to these rules 5668c609719bSwdenkmay be rejected, even when they contain important and valuable stuff. 5669c609719bSwdenk 56700d28f34bSMagnus LiljaPlease see http://www.denx.de/wiki/U-Boot/Patches for details. 5671218ca724SWolfgang Denk 56720668236bSWolfgang DenkPatches shall be sent to the u-boot mailing list <u-boot@lists.denx.de>; 56730668236bSWolfgang Denksee http://lists.denx.de/mailman/listinfo/u-boot 56740668236bSWolfgang Denk 5675c609719bSwdenkWhen you send a patch, please include the following information with 5676c609719bSwdenkit: 5677c609719bSwdenk 5678c609719bSwdenk* For bug fixes: a description of the bug and how your patch fixes 5679c609719bSwdenk this bug. Please try to include a way of demonstrating that the 5680c609719bSwdenk patch actually fixes something. 5681c609719bSwdenk 5682c609719bSwdenk* For new features: a description of the feature and your 5683c609719bSwdenk implementation. 5684c609719bSwdenk 5685c609719bSwdenk* A CHANGELOG entry as plaintext (separate from the patch) 5686c609719bSwdenk 5687c609719bSwdenk* For major contributions, your entry to the CREDITS file 5688c609719bSwdenk 5689c609719bSwdenk* When you add support for a new board, don't forget to add this 56907ca9296eSWolfgang Denk board to the MAINTAINERS file, too. 5691c609719bSwdenk 5692c609719bSwdenk* If your patch adds new configuration options, don't forget to 5693c609719bSwdenk document these in the README file. 5694c609719bSwdenk 5695218ca724SWolfgang Denk* The patch itself. If you are using git (which is *strongly* 5696218ca724SWolfgang Denk recommended) you can easily generate the patch using the 56977ca9296eSWolfgang Denk "git format-patch". If you then use "git send-email" to send it to 5698218ca724SWolfgang Denk the U-Boot mailing list, you will avoid most of the common problems 5699218ca724SWolfgang Denk with some other mail clients. 5700c609719bSwdenk 5701218ca724SWolfgang Denk If you cannot use git, use "diff -purN OLD NEW". If your version of 5702218ca724SWolfgang Denk diff does not support these options, then get the latest version of 5703218ca724SWolfgang Denk GNU diff. 57046dff5529Swdenk 5705218ca724SWolfgang Denk The current directory when running this command shall be the parent 5706218ca724SWolfgang Denk directory of the U-Boot source tree (i. e. please make sure that 5707218ca724SWolfgang Denk your patch includes sufficient directory information for the 5708218ca724SWolfgang Denk affected files). 5709218ca724SWolfgang Denk 5710218ca724SWolfgang Denk We prefer patches as plain text. MIME attachments are discouraged, 5711218ca724SWolfgang Denk and compressed attachments must not be used. 5712c609719bSwdenk 571352f52c14Swdenk* If one logical set of modifications affects or creates several 571452f52c14Swdenk files, all these changes shall be submitted in a SINGLE patch file. 571552f52c14Swdenk 571652f52c14Swdenk* Changesets that contain different, unrelated modifications shall be 571752f52c14Swdenk submitted as SEPARATE patches, one patch per changeset. 571852f52c14Swdenk 571952f52c14Swdenk 5720c609719bSwdenkNotes: 5721c609719bSwdenk 5722c609719bSwdenk* Before sending the patch, run the MAKEALL script on your patched 5723c609719bSwdenk source tree and make sure that no errors or warnings are reported 5724c609719bSwdenk for any of the boards. 5725c609719bSwdenk 5726c609719bSwdenk* Keep your modifications to the necessary minimum: A patch 5727c609719bSwdenk containing several unrelated changes or arbitrary reformats will be 5728c609719bSwdenk returned with a request to re-formatting / split it. 5729c609719bSwdenk 5730c609719bSwdenk* If you modify existing code, make sure that your new code does not 5731c609719bSwdenk add to the memory footprint of the code ;-) Small is beautiful! 5732c609719bSwdenk When adding new features, these should compile conditionally only 5733c609719bSwdenk (using #ifdef), and the resulting code with the new feature 5734c609719bSwdenk disabled must not need more memory than the old code without your 5735c609719bSwdenk modification. 573690dc6704Swdenk 57370668236bSWolfgang Denk* Remember that there is a size limit of 100 kB per message on the 57380668236bSWolfgang Denk u-boot mailing list. Bigger patches will be moderated. If they are 57390668236bSWolfgang Denk reasonable and not too big, they will be acknowledged. But patches 57400668236bSWolfgang Denk bigger than the size limit should be avoided. 5741