1c609719bSwdenk# 2eca3aeb3SWolfgang Denk# (C) Copyright 2000 - 2013 3c609719bSwdenk# Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4c609719bSwdenk# 5eca3aeb3SWolfgang Denk# SPDX-License-Identifier: GPL-2.0+ 6c609719bSwdenk# 7c609719bSwdenk 8c609719bSwdenkSummary: 9c609719bSwdenk======== 10c609719bSwdenk 1124ee89b9SwdenkThis directory contains the source code for U-Boot, a boot loader for 12e86e5a07SwdenkEmbedded boards based on PowerPC, ARM, MIPS and several other 13e86e5a07Swdenkprocessors, which can be installed in a boot ROM and used to 14e86e5a07Swdenkinitialize and test the hardware or to download and run application 15e86e5a07Swdenkcode. 16c609719bSwdenk 17c609719bSwdenkThe development of U-Boot is closely related to Linux: some parts of 1824ee89b9Swdenkthe source code originate in the Linux source tree, we have some 1924ee89b9Swdenkheader files in common, and special provision has been made to 20c609719bSwdenksupport booting of Linux images. 21c609719bSwdenk 22c609719bSwdenkSome attention has been paid to make this software easily 23c609719bSwdenkconfigurable and extendable. For instance, all monitor commands are 24c609719bSwdenkimplemented with the same call interface, so that it's very easy to 25c609719bSwdenkadd new commands. Also, instead of permanently adding rarely used 26c609719bSwdenkcode (for instance hardware test utilities) to the monitor, you can 27c609719bSwdenkload and run it dynamically. 28c609719bSwdenk 29c609719bSwdenk 30c609719bSwdenkStatus: 31c609719bSwdenk======= 32c609719bSwdenk 33c609719bSwdenkIn general, all boards for which a configuration option exists in the 34c609719bSwdenkMakefile have been tested to some extent and can be considered 35c609719bSwdenk"working". In fact, many of them are used in production systems. 36c609719bSwdenk 37c609719bSwdenkIn case of problems see the CHANGELOG and CREDITS files to find out 3827af930eSAlbert ARIBAUDwho contributed the specific port. The boards.cfg file lists board 39218ca724SWolfgang Denkmaintainers. 40c609719bSwdenk 41adb9d851SRobert P. J. DayNote: There is no CHANGELOG file in the actual U-Boot source tree; 42adb9d851SRobert P. J. Dayit can be created dynamically from the Git log using: 43adb9d851SRobert P. J. Day 44adb9d851SRobert P. J. Day make CHANGELOG 45adb9d851SRobert P. J. Day 46c609719bSwdenk 47c609719bSwdenkWhere to get help: 48c609719bSwdenk================== 49c609719bSwdenk 50c609719bSwdenkIn case you have questions about, problems with or contributions for 51c609719bSwdenkU-Boot you should send a message to the U-Boot mailing list at 520c32565fSPeter Tyser<u-boot@lists.denx.de>. There is also an archive of previous traffic 530c32565fSPeter Tyseron the mailing list - please search the archive before asking FAQ's. 540c32565fSPeter TyserPlease see http://lists.denx.de/pipermail/u-boot and 550c32565fSPeter Tyserhttp://dir.gmane.org/gmane.comp.boot-loaders.u-boot 56c609719bSwdenk 57c609719bSwdenk 58218ca724SWolfgang DenkWhere to get source code: 59218ca724SWolfgang Denk========================= 60218ca724SWolfgang Denk 61218ca724SWolfgang DenkThe U-Boot source code is maintained in the git repository at 62218ca724SWolfgang Denkgit://www.denx.de/git/u-boot.git ; you can browse it online at 63218ca724SWolfgang Denkhttp://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=summary 64218ca724SWolfgang Denk 65218ca724SWolfgang DenkThe "snapshot" links on this page allow you to download tarballs of 6611ccc33fSMarcel Ziswilerany version you might be interested in. Official releases are also 67218ca724SWolfgang Denkavailable for FTP download from the ftp://ftp.denx.de/pub/u-boot/ 68218ca724SWolfgang Denkdirectory. 69218ca724SWolfgang Denk 70d4ee711dSAnatolij GustschinPre-built (and tested) images are available from 71218ca724SWolfgang Denkftp://ftp.denx.de/pub/u-boot/images/ 72218ca724SWolfgang Denk 73218ca724SWolfgang Denk 74c609719bSwdenkWhere we come from: 75c609719bSwdenk=================== 76c609719bSwdenk 77c609719bSwdenk- start from 8xxrom sources 7824ee89b9Swdenk- create PPCBoot project (http://sourceforge.net/projects/ppcboot) 79c609719bSwdenk- clean up code 80c609719bSwdenk- make it easier to add custom boards 81c609719bSwdenk- make it possible to add other [PowerPC] CPUs 82c609719bSwdenk- extend functions, especially: 83c609719bSwdenk * Provide extended interface to Linux boot loader 84c609719bSwdenk * S-Record download 85c609719bSwdenk * network boot 8611ccc33fSMarcel Ziswiler * PCMCIA / CompactFlash / ATA disk / SCSI ... boot 8724ee89b9Swdenk- create ARMBoot project (http://sourceforge.net/projects/armboot) 88c609719bSwdenk- add other CPU families (starting with ARM) 8924ee89b9Swdenk- create U-Boot project (http://sourceforge.net/projects/u-boot) 900d28f34bSMagnus Lilja- current project page: see http://www.denx.de/wiki/U-Boot 9124ee89b9Swdenk 9224ee89b9Swdenk 9324ee89b9SwdenkNames and Spelling: 9424ee89b9Swdenk=================== 9524ee89b9Swdenk 9624ee89b9SwdenkThe "official" name of this project is "Das U-Boot". The spelling 9724ee89b9Swdenk"U-Boot" shall be used in all written text (documentation, comments 9824ee89b9Swdenkin source files etc.). Example: 9924ee89b9Swdenk 10024ee89b9Swdenk This is the README file for the U-Boot project. 10124ee89b9Swdenk 10224ee89b9SwdenkFile names etc. shall be based on the string "u-boot". Examples: 10324ee89b9Swdenk 10424ee89b9Swdenk include/asm-ppc/u-boot.h 10524ee89b9Swdenk 10624ee89b9Swdenk #include <asm/u-boot.h> 10724ee89b9Swdenk 10824ee89b9SwdenkVariable names, preprocessor constants etc. shall be either based on 10924ee89b9Swdenkthe string "u_boot" or on "U_BOOT". Example: 11024ee89b9Swdenk 11124ee89b9Swdenk U_BOOT_VERSION u_boot_logo 11224ee89b9Swdenk IH_OS_U_BOOT u_boot_hush_start 113c609719bSwdenk 114c609719bSwdenk 11593f19cc0SwdenkVersioning: 11693f19cc0Swdenk=========== 11793f19cc0Swdenk 118360d883aSThomas WeberStarting with the release in October 2008, the names of the releases 119360d883aSThomas Weberwere changed from numerical release numbers without deeper meaning 120360d883aSThomas Weberinto a time stamp based numbering. Regular releases are identified by 121360d883aSThomas Webernames consisting of the calendar year and month of the release date. 122360d883aSThomas WeberAdditional fields (if present) indicate release candidates or bug fix 123360d883aSThomas Weberreleases in "stable" maintenance trees. 12493f19cc0Swdenk 125360d883aSThomas WeberExamples: 126360d883aSThomas Weber U-Boot v2009.11 - Release November 2009 127360d883aSThomas Weber U-Boot v2009.11.1 - Release 1 in version November 2009 stable tree 128360d883aSThomas Weber U-Boot v2010.09-rc1 - Release candiate 1 for September 2010 release 12993f19cc0Swdenk 13093f19cc0Swdenk 131c609719bSwdenkDirectory Hierarchy: 132c609719bSwdenk==================== 133c609719bSwdenk 1348d321b81SPeter Tyser/arch Architecture specific files 1356eae68e4SMasahiro Yamada /arc Files generic to ARC architecture 1366eae68e4SMasahiro Yamada /cpu CPU specific files 1376eae68e4SMasahiro Yamada /arc700 Files specific to ARC 700 CPUs 1386eae68e4SMasahiro Yamada /lib Architecture specific library files 1398d321b81SPeter Tyser /arm Files generic to ARM architecture 1408d321b81SPeter Tyser /cpu CPU specific files 1418d321b81SPeter Tyser /arm720t Files specific to ARM 720 CPUs 1428d321b81SPeter Tyser /arm920t Files specific to ARM 920 CPUs 1436eb0921aSAndreas Bießmann /at91 Files specific to Atmel AT91RM9200 CPU 1448d321b81SPeter Tyser /imx Files specific to Freescale MC9328 i.MX CPUs 1458d321b81SPeter Tyser /s3c24x0 Files specific to Samsung S3C24X0 CPUs 1468d321b81SPeter Tyser /arm926ejs Files specific to ARM 926 CPUs 1478d321b81SPeter Tyser /arm1136 Files specific to ARM 1136 CPUs 1488d321b81SPeter Tyser /pxa Files specific to Intel XScale PXA CPUs 1498d321b81SPeter Tyser /sa1100 Files specific to Intel StrongARM SA1100 CPUs 1508d321b81SPeter Tyser /lib Architecture specific library files 1518d321b81SPeter Tyser /avr32 Files generic to AVR32 architecture 1528d321b81SPeter Tyser /cpu CPU specific files 1538d321b81SPeter Tyser /lib Architecture specific library files 1548d321b81SPeter Tyser /blackfin Files generic to Analog Devices Blackfin architecture 1558d321b81SPeter Tyser /cpu CPU specific files 1568d321b81SPeter Tyser /lib Architecture specific library files 1578d321b81SPeter Tyser /m68k Files generic to m68k architecture 1588d321b81SPeter Tyser /cpu CPU specific files 1598d321b81SPeter Tyser /mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs 1608d321b81SPeter Tyser /mcf5227x Files specific to Freescale ColdFire MCF5227x CPUs 1618d321b81SPeter Tyser /mcf532x Files specific to Freescale ColdFire MCF5329 CPUs 1628d321b81SPeter Tyser /mcf5445x Files specific to Freescale ColdFire MCF5445x CPUs 1638d321b81SPeter Tyser /mcf547x_8x Files specific to Freescale ColdFire MCF547x_8x CPUs 1648d321b81SPeter Tyser /lib Architecture specific library files 1658d321b81SPeter Tyser /microblaze Files generic to microblaze architecture 1668d321b81SPeter Tyser /cpu CPU specific files 1678d321b81SPeter Tyser /lib Architecture specific library files 1688d321b81SPeter Tyser /mips Files generic to MIPS architecture 1698d321b81SPeter Tyser /cpu CPU specific files 17092bbd64eSDaniel Schwierzeck /mips32 Files specific to MIPS32 CPUs 1716eae68e4SMasahiro Yamada /mips64 Files specific to MIPS64 CPUs 1728d321b81SPeter Tyser /lib Architecture specific library files 173afc1ce82SMacpaul Lin /nds32 Files generic to NDS32 architecture 174afc1ce82SMacpaul Lin /cpu CPU specific files 175afc1ce82SMacpaul Lin /n1213 Files specific to Andes Technology N1213 CPUs 176afc1ce82SMacpaul Lin /lib Architecture specific library files 1778d321b81SPeter Tyser /nios2 Files generic to Altera NIOS2 architecture 1788d321b81SPeter Tyser /cpu CPU specific files 1798d321b81SPeter Tyser /lib Architecture specific library files 18033c7731bSRobert P. J. Day /openrisc Files generic to OpenRISC architecture 18133c7731bSRobert P. J. Day /cpu CPU specific files 18233c7731bSRobert P. J. Day /lib Architecture specific library files 183a47a12beSStefan Roese /powerpc Files generic to PowerPC architecture 1848d321b81SPeter Tyser /cpu CPU specific files 1858d321b81SPeter Tyser /74xx_7xx Files specific to Freescale MPC74xx and 7xx CPUs 1868d321b81SPeter Tyser /mpc5xx Files specific to Freescale MPC5xx CPUs 1878d321b81SPeter Tyser /mpc5xxx Files specific to Freescale MPC5xxx CPUs 1888d321b81SPeter Tyser /mpc8xx Files specific to Freescale MPC8xx CPUs 1898d321b81SPeter Tyser /mpc824x Files specific to Freescale MPC824x CPUs 1908d321b81SPeter Tyser /mpc8260 Files specific to Freescale MPC8260 CPUs 1918d321b81SPeter Tyser /mpc85xx Files specific to Freescale MPC85xx CPUs 1928d321b81SPeter Tyser /ppc4xx Files specific to AMCC PowerPC 4xx CPUs 1938d321b81SPeter Tyser /lib Architecture specific library files 1948d321b81SPeter Tyser /sh Files generic to SH architecture 1958d321b81SPeter Tyser /cpu CPU specific files 1968d321b81SPeter Tyser /sh2 Files specific to sh2 CPUs 1978d321b81SPeter Tyser /sh3 Files specific to sh3 CPUs 1988d321b81SPeter Tyser /sh4 Files specific to sh4 CPUs 1998d321b81SPeter Tyser /lib Architecture specific library files 2008d321b81SPeter Tyser /sparc Files generic to SPARC architecture 2018d321b81SPeter Tyser /cpu CPU specific files 2028d321b81SPeter Tyser /leon2 Files specific to Gaisler LEON2 SPARC CPU 2038d321b81SPeter Tyser /leon3 Files specific to Gaisler LEON3 SPARC CPU 2048d321b81SPeter Tyser /lib Architecture specific library files 20533c7731bSRobert P. J. Day /x86 Files generic to x86 architecture 20633c7731bSRobert P. J. Day /cpu CPU specific files 20733c7731bSRobert P. J. Day /lib Architecture specific library files 2088d321b81SPeter Tyser/api Machine/arch independent API for external apps 2098d321b81SPeter Tyser/board Board dependent files 2108d321b81SPeter Tyser/common Misc architecture independent functions 2118d321b81SPeter Tyser/disk Code for disk drive partition handling 2128d321b81SPeter Tyser/doc Documentation (don't expect too much) 2138d321b81SPeter Tyser/drivers Commonly used device drivers 21433c7731bSRobert P. J. Day/dts Contains Makefile for building internal U-Boot fdt. 2158d321b81SPeter Tyser/examples Example code for standalone applications, etc. 2168d321b81SPeter Tyser/fs Filesystem code (cramfs, ext2, jffs2, etc.) 2178d321b81SPeter Tyser/include Header Files 2188d321b81SPeter Tyser/lib Files generic to all architectures 2198d321b81SPeter Tyser /libfdt Library files to support flattened device trees 2208d321b81SPeter Tyser /lzma Library files to support LZMA decompression 2218d321b81SPeter Tyser /lzo Library files to support LZO decompression 2228d321b81SPeter Tyser/net Networking code 2238d321b81SPeter Tyser/post Power On Self Test 22433c7731bSRobert P. J. Day/spl Secondary Program Loader framework 2258d321b81SPeter Tyser/tools Tools to build S-Record or U-Boot images, etc. 226c609719bSwdenk 227c609719bSwdenkSoftware Configuration: 228c609719bSwdenk======================= 229c609719bSwdenk 230c609719bSwdenkConfiguration is usually done using C preprocessor defines; the 231c609719bSwdenkrationale behind that is to avoid dead code whenever possible. 232c609719bSwdenk 233c609719bSwdenkThere are two classes of configuration variables: 234c609719bSwdenk 235c609719bSwdenk* Configuration _OPTIONS_: 236c609719bSwdenk These are selectable by the user and have names beginning with 237c609719bSwdenk "CONFIG_". 238c609719bSwdenk 239c609719bSwdenk* Configuration _SETTINGS_: 240c609719bSwdenk These depend on the hardware etc. and should not be meddled with if 241c609719bSwdenk you don't know what you're doing; they have names beginning with 2426d0f6bcfSJean-Christophe PLAGNIOL-VILLARD "CONFIG_SYS_". 243c609719bSwdenk 244c609719bSwdenkLater we will add a configuration tool - probably similar to or even 245c609719bSwdenkidentical to what's used for the Linux kernel. Right now, we have to 246c609719bSwdenkdo the configuration by hand, which means creating some symbolic 247c609719bSwdenklinks and editing some configuration files. We use the TQM8xxL boards 248c609719bSwdenkas an example here. 249c609719bSwdenk 250c609719bSwdenk 251c609719bSwdenkSelection of Processor Architecture and Board Type: 252c609719bSwdenk--------------------------------------------------- 253c609719bSwdenk 254c609719bSwdenkFor all supported boards there are ready-to-use default 255c609719bSwdenkconfigurations available; just type "make <board_name>_config". 256c609719bSwdenk 257c609719bSwdenkExample: For a TQM823L module type: 258c609719bSwdenk 259c609719bSwdenk cd u-boot 260c609719bSwdenk make TQM823L_config 261c609719bSwdenk 26211ccc33fSMarcel ZiswilerFor the Cogent platform, you need to specify the CPU type as well; 263c609719bSwdenke.g. "make cogent_mpc8xx_config". And also configure the cogent 264c609719bSwdenkdirectory according to the instructions in cogent/README. 265c609719bSwdenk 266c609719bSwdenk 26775b3c3aaSSimon GlassSandbox Environment: 26875b3c3aaSSimon Glass-------------------- 26975b3c3aaSSimon Glass 27075b3c3aaSSimon GlassU-Boot can be built natively to run on a Linux host using the 'sandbox' 27175b3c3aaSSimon Glassboard. This allows feature development which is not board- or architecture- 27275b3c3aaSSimon Glassspecific to be undertaken on a native platform. The sandbox is also used to 27375b3c3aaSSimon Glassrun some of U-Boot's tests. 27475b3c3aaSSimon Glass 27575b3c3aaSSimon GlassSee board/sandbox/sandbox/README.sandbox for more details. 27675b3c3aaSSimon Glass 27775b3c3aaSSimon Glass 278c609719bSwdenkConfiguration Options: 279c609719bSwdenk---------------------- 280c609719bSwdenk 281c609719bSwdenkConfiguration depends on the combination of board and CPU type; all 282c609719bSwdenksuch information is kept in a configuration file 283c609719bSwdenk"include/configs/<board_name>.h". 284c609719bSwdenk 285c609719bSwdenkExample: For a TQM823L module, all configuration settings are in 286c609719bSwdenk"include/configs/TQM823L.h". 287c609719bSwdenk 288c609719bSwdenk 2897f6c2cbcSwdenkMany of the options are named exactly as the corresponding Linux 2907f6c2cbcSwdenkkernel configuration options. The intention is to make it easier to 2917f6c2cbcSwdenkbuild a config tool - later. 2927f6c2cbcSwdenk 2937f6c2cbcSwdenk 294c609719bSwdenkThe following options need to be configured: 295c609719bSwdenk 2962628114eSKim Phillips- CPU Type: Define exactly one, e.g. CONFIG_MPC85XX. 297c609719bSwdenk 2982628114eSKim Phillips- Board Type: Define exactly one, e.g. CONFIG_MPC8540ADS. 2996ccec449SWolfgang Denk 3006ccec449SWolfgang Denk- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined) 30109ea0de0SHaavard Skinnemoen Define exactly one, e.g. CONFIG_ATSTK1002 302c609719bSwdenk 303c609719bSwdenk- CPU Module Type: (if CONFIG_COGENT is defined) 304c609719bSwdenk Define exactly one of 305c609719bSwdenk CONFIG_CMA286_60_OLD 306c609719bSwdenk--- FIXME --- not tested yet: 307c609719bSwdenk CONFIG_CMA286_60, CONFIG_CMA286_21, CONFIG_CMA286_60P, 308c609719bSwdenk CONFIG_CMA287_23, CONFIG_CMA287_50 309c609719bSwdenk 310c609719bSwdenk- Motherboard Type: (if CONFIG_COGENT is defined) 311c609719bSwdenk Define exactly one of 312c609719bSwdenk CONFIG_CMA101, CONFIG_CMA102 313c609719bSwdenk 314c609719bSwdenk- Motherboard I/O Modules: (if CONFIG_COGENT is defined) 315c609719bSwdenk Define one or more of 316c609719bSwdenk CONFIG_CMA302 317c609719bSwdenk 318c609719bSwdenk- Motherboard Options: (if CONFIG_CMA101 or CONFIG_CMA102 are defined) 319c609719bSwdenk Define one or more of 320c609719bSwdenk CONFIG_LCD_HEARTBEAT - update a character position on 32111ccc33fSMarcel Ziswiler the LCD display every second with 322c609719bSwdenk a "rotator" |\-/|\-/ 323c609719bSwdenk 324cf946c6dSLei Wen- Marvell Family Member 325cf946c6dSLei Wen CONFIG_SYS_MVFS - define it if you want to enable 326cf946c6dSLei Wen multiple fs option at one time 327cf946c6dSLei Wen for marvell soc family 328cf946c6dSLei Wen 329c609719bSwdenk- MPC824X Family Member (if CONFIG_MPC824X is defined) 330c609719bSwdenk Define exactly one of 331c609719bSwdenk CONFIG_MPC8240, CONFIG_MPC8245 332c609719bSwdenk 33311ccc33fSMarcel Ziswiler- 8xx CPU Options: (if using an MPC8xx CPU) 33466ca92a5Swdenk CONFIG_8xx_GCLK_FREQ - deprecated: CPU clock if 33566ca92a5Swdenk get_gclk_freq() cannot work 3365da627a4Swdenk e.g. if there is no 32KHz 3375da627a4Swdenk reference PIT/RTC clock 33866ca92a5Swdenk CONFIG_8xx_OSCLK - PLL input clock (either EXTCLK 33966ca92a5Swdenk or XTAL/EXTAL) 340c609719bSwdenk 34166ca92a5Swdenk- 859/866/885 CPU options: (if using a MPC859 or MPC866 or MPC885 CPU): 3426d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_8xx_CPUCLK_MIN 3436d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_8xx_CPUCLK_MAX 34466ca92a5Swdenk CONFIG_8xx_CPUCLK_DEFAULT 34575d1ea7fSwdenk See doc/README.MPC866 34675d1ea7fSwdenk 3476d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_MEASURE_CPUCLK 34875d1ea7fSwdenk 34975d1ea7fSwdenk Define this to measure the actual CPU clock instead 35075d1ea7fSwdenk of relying on the correctness of the configured 35175d1ea7fSwdenk values. Mostly useful for board bringup to make sure 35275d1ea7fSwdenk the PLL is locked at the intended frequency. Note 35375d1ea7fSwdenk that this requires a (stable) reference clock (32 kHz 3546d0f6bcfSJean-Christophe PLAGNIOL-VILLARD RTC clock or CONFIG_SYS_8XX_XIN) 35575d1ea7fSwdenk 356506f3918SHeiko Schocher CONFIG_SYS_DELAYED_ICACHE 357506f3918SHeiko Schocher 358506f3918SHeiko Schocher Define this option if you want to enable the 359506f3918SHeiko Schocher ICache only when Code runs from RAM. 360506f3918SHeiko Schocher 36166412c63SKumar Gala- 85xx CPU Options: 362ffd06e02SYork Sun CONFIG_SYS_PPC64 363ffd06e02SYork Sun 364ffd06e02SYork Sun Specifies that the core is a 64-bit PowerPC implementation (implements 365ffd06e02SYork Sun the "64" category of the Power ISA). This is necessary for ePAPR 366ffd06e02SYork Sun compliance, among other possible reasons. 367ffd06e02SYork Sun 36866412c63SKumar Gala CONFIG_SYS_FSL_TBCLK_DIV 36966412c63SKumar Gala 37066412c63SKumar Gala Defines the core time base clock divider ratio compared to the 37166412c63SKumar Gala system clock. On most PQ3 devices this is 8, on newer QorIQ 37266412c63SKumar Gala devices it can be 16 or 32. The ratio varies from SoC to Soc. 37366412c63SKumar Gala 3748f29084aSKumar Gala CONFIG_SYS_FSL_PCIE_COMPAT 3758f29084aSKumar Gala 3768f29084aSKumar Gala Defines the string to utilize when trying to match PCIe device 3778f29084aSKumar Gala tree nodes for the given platform. 3788f29084aSKumar Gala 379afa6b551SPrabhakar Kushwaha CONFIG_SYS_PPC_E500_DEBUG_TLB 380afa6b551SPrabhakar Kushwaha 381afa6b551SPrabhakar Kushwaha Enables a temporary TLB entry to be used during boot to work 382afa6b551SPrabhakar Kushwaha around limitations in e500v1 and e500v2 external debugger 383afa6b551SPrabhakar Kushwaha support. This reduces the portions of the boot code where 384afa6b551SPrabhakar Kushwaha breakpoints and single stepping do not work. The value of this 385afa6b551SPrabhakar Kushwaha symbol should be set to the TLB1 entry to be used for this 386afa6b551SPrabhakar Kushwaha purpose. 387afa6b551SPrabhakar Kushwaha 38833eee330SScott Wood CONFIG_SYS_FSL_ERRATUM_A004510 38933eee330SScott Wood 39033eee330SScott Wood Enables a workaround for erratum A004510. If set, 39133eee330SScott Wood then CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV and 39233eee330SScott Wood CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY must be set. 39333eee330SScott Wood 39433eee330SScott Wood CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 39533eee330SScott Wood CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 (optional) 39633eee330SScott Wood 39733eee330SScott Wood Defines one or two SoC revisions (low 8 bits of SVR) 39833eee330SScott Wood for which the A004510 workaround should be applied. 39933eee330SScott Wood 40033eee330SScott Wood The rest of SVR is either not relevant to the decision 40133eee330SScott Wood of whether the erratum is present (e.g. p2040 versus 40233eee330SScott Wood p2041) or is implied by the build target, which controls 40333eee330SScott Wood whether CONFIG_SYS_FSL_ERRATUM_A004510 is set. 40433eee330SScott Wood 40533eee330SScott Wood See Freescale App Note 4493 for more information about 40633eee330SScott Wood this erratum. 40733eee330SScott Wood 40874fa22edSPrabhakar Kushwaha CONFIG_A003399_NOR_WORKAROUND 40974fa22edSPrabhakar Kushwaha Enables a workaround for IFC erratum A003399. It is only 41074fa22edSPrabhakar Kushwaha requred during NOR boot. 41174fa22edSPrabhakar Kushwaha 41233eee330SScott Wood CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 41333eee330SScott Wood 41433eee330SScott Wood This is the value to write into CCSR offset 0x18600 41533eee330SScott Wood according to the A004510 workaround. 41633eee330SScott Wood 41764501c66SPriyanka Jain CONFIG_SYS_FSL_DSP_DDR_ADDR 41864501c66SPriyanka Jain This value denotes start offset of DDR memory which is 41964501c66SPriyanka Jain connected exclusively to the DSP cores. 42064501c66SPriyanka Jain 421765b0bdbSPriyanka Jain CONFIG_SYS_FSL_DSP_M2_RAM_ADDR 422765b0bdbSPriyanka Jain This value denotes start offset of M2 memory 423765b0bdbSPriyanka Jain which is directly connected to the DSP core. 424765b0bdbSPriyanka Jain 42564501c66SPriyanka Jain CONFIG_SYS_FSL_DSP_M3_RAM_ADDR 42664501c66SPriyanka Jain This value denotes start offset of M3 memory which is directly 42764501c66SPriyanka Jain connected to the DSP core. 42864501c66SPriyanka Jain 429765b0bdbSPriyanka Jain CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 430765b0bdbSPriyanka Jain This value denotes start offset of DSP CCSR space. 431765b0bdbSPriyanka Jain 432b135991aSPriyanka Jain CONFIG_SYS_FSL_SINGLE_SOURCE_CLK 433b135991aSPriyanka Jain Single Source Clock is clocking mode present in some of FSL SoC's. 434b135991aSPriyanka Jain In this mode, a single differential clock is used to supply 435b135991aSPriyanka Jain clocks to the sysclock, ddrclock and usbclock. 436b135991aSPriyanka Jain 437fb4a2409SAneesh Bansal CONFIG_SYS_CPC_REINIT_F 438fb4a2409SAneesh Bansal This CONFIG is defined when the CPC is configured as SRAM at the 439fb4a2409SAneesh Bansal time of U-boot entry and is required to be re-initialized. 440fb4a2409SAneesh Bansal 441aade2004STang Yuantian CONFIG_DEEP_SLEEP 442aade2004STang Yuantian Inidcates this SoC supports deep sleep feature. If deep sleep is 443aade2004STang Yuantian supported, core will start to execute uboot when wakes up. 444aade2004STang Yuantian 4456cb461b4SDaniel Schwierzeck- Generic CPU options: 4462a1680e3SYork Sun CONFIG_SYS_GENERIC_GLOBAL_DATA 4472a1680e3SYork Sun Defines global data is initialized in generic board board_init_f(). 4482a1680e3SYork Sun If this macro is defined, global data is created and cleared in 4492a1680e3SYork Sun generic board board_init_f(). Without this macro, architecture/board 4502a1680e3SYork Sun should initialize global data before calling board_init_f(). 4512a1680e3SYork Sun 4526cb461b4SDaniel Schwierzeck CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN 4536cb461b4SDaniel Schwierzeck 4546cb461b4SDaniel Schwierzeck Defines the endianess of the CPU. Implementation of those 4556cb461b4SDaniel Schwierzeck values is arch specific. 4566cb461b4SDaniel Schwierzeck 4575614e71bSYork Sun CONFIG_SYS_FSL_DDR 4585614e71bSYork Sun Freescale DDR driver in use. This type of DDR controller is 4595614e71bSYork Sun found in mpc83xx, mpc85xx, mpc86xx as well as some ARM core 4605614e71bSYork Sun SoCs. 4615614e71bSYork Sun 4625614e71bSYork Sun CONFIG_SYS_FSL_DDR_ADDR 4635614e71bSYork Sun Freescale DDR memory-mapped register base. 4645614e71bSYork Sun 4655614e71bSYork Sun CONFIG_SYS_FSL_DDR_EMU 4665614e71bSYork Sun Specify emulator support for DDR. Some DDR features such as 4675614e71bSYork Sun deskew training are not available. 4685614e71bSYork Sun 4695614e71bSYork Sun CONFIG_SYS_FSL_DDRC_GEN1 4705614e71bSYork Sun Freescale DDR1 controller. 4715614e71bSYork Sun 4725614e71bSYork Sun CONFIG_SYS_FSL_DDRC_GEN2 4735614e71bSYork Sun Freescale DDR2 controller. 4745614e71bSYork Sun 4755614e71bSYork Sun CONFIG_SYS_FSL_DDRC_GEN3 4765614e71bSYork Sun Freescale DDR3 controller. 4775614e71bSYork Sun 47834e026f9SYork Sun CONFIG_SYS_FSL_DDRC_GEN4 47934e026f9SYork Sun Freescale DDR4 controller. 48034e026f9SYork Sun 4819ac4ffbdSYork Sun CONFIG_SYS_FSL_DDRC_ARM_GEN3 4829ac4ffbdSYork Sun Freescale DDR3 controller for ARM-based SoCs. 4839ac4ffbdSYork Sun 4845614e71bSYork Sun CONFIG_SYS_FSL_DDR1 4855614e71bSYork Sun Board config to use DDR1. It can be enabled for SoCs with 4865614e71bSYork Sun Freescale DDR1 or DDR2 controllers, depending on the board 4875614e71bSYork Sun implemetation. 4885614e71bSYork Sun 4895614e71bSYork Sun CONFIG_SYS_FSL_DDR2 4905614e71bSYork Sun Board config to use DDR2. It can be eanbeld for SoCs with 4915614e71bSYork Sun Freescale DDR2 or DDR3 controllers, depending on the board 4925614e71bSYork Sun implementation. 4935614e71bSYork Sun 4945614e71bSYork Sun CONFIG_SYS_FSL_DDR3 4955614e71bSYork Sun Board config to use DDR3. It can be enabled for SoCs with 49634e026f9SYork Sun Freescale DDR3 or DDR3L controllers. 49734e026f9SYork Sun 49834e026f9SYork Sun CONFIG_SYS_FSL_DDR3L 49934e026f9SYork Sun Board config to use DDR3L. It can be enabled for SoCs with 50034e026f9SYork Sun DDR3L controllers. 50134e026f9SYork Sun 50234e026f9SYork Sun CONFIG_SYS_FSL_DDR4 50334e026f9SYork Sun Board config to use DDR4. It can be enabled for SoCs with 50434e026f9SYork Sun DDR4 controllers. 5055614e71bSYork Sun 5061b4175d6SPrabhakar Kushwaha CONFIG_SYS_FSL_IFC_BE 5071b4175d6SPrabhakar Kushwaha Defines the IFC controller register space as Big Endian 5081b4175d6SPrabhakar Kushwaha 5091b4175d6SPrabhakar Kushwaha CONFIG_SYS_FSL_IFC_LE 5101b4175d6SPrabhakar Kushwaha Defines the IFC controller register space as Little Endian 5111b4175d6SPrabhakar Kushwaha 512690e4258SPrabhakar Kushwaha CONFIG_SYS_FSL_PBL_PBI 513690e4258SPrabhakar Kushwaha It enables addition of RCW (Power on reset configuration) in built image. 514690e4258SPrabhakar Kushwaha Please refer doc/README.pblimage for more details 515690e4258SPrabhakar Kushwaha 516690e4258SPrabhakar Kushwaha CONFIG_SYS_FSL_PBL_RCW 517690e4258SPrabhakar Kushwaha It adds PBI(pre-boot instructions) commands in u-boot build image. 518690e4258SPrabhakar Kushwaha PBI commands can be used to configure SoC before it starts the execution. 519690e4258SPrabhakar Kushwaha Please refer doc/README.pblimage for more details 520690e4258SPrabhakar Kushwaha 52189ad7be8SPrabhakar Kushwaha CONFIG_SPL_FSL_PBL 52289ad7be8SPrabhakar Kushwaha It adds a target to create boot binary having SPL binary in PBI format 52389ad7be8SPrabhakar Kushwaha concatenated with u-boot binary. 52489ad7be8SPrabhakar Kushwaha 5254e5b1bd0SYork Sun CONFIG_SYS_FSL_DDR_BE 5264e5b1bd0SYork Sun Defines the DDR controller register space as Big Endian 5274e5b1bd0SYork Sun 5284e5b1bd0SYork Sun CONFIG_SYS_FSL_DDR_LE 5294e5b1bd0SYork Sun Defines the DDR controller register space as Little Endian 5304e5b1bd0SYork Sun 5316b9e309aSYork Sun CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 5326b9e309aSYork Sun Physical address from the view of DDR controllers. It is the 5336b9e309aSYork Sun same as CONFIG_SYS_DDR_SDRAM_BASE for all Power SoCs. But 5346b9e309aSYork Sun it could be different for ARM SoCs. 5356b9e309aSYork Sun 5366b1e1254SYork Sun CONFIG_SYS_FSL_DDR_INTLV_256B 5376b1e1254SYork Sun DDR controller interleaving on 256-byte. This is a special 5386b1e1254SYork Sun interleaving mode, handled by Dickens for Freescale layerscape 5396b1e1254SYork Sun SoCs with ARM core. 5406b1e1254SYork Sun 5410b953ffcSMarkus Klotzbuecher- Intel Monahans options: 5426d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO 5430b953ffcSMarkus Klotzbuecher 5440b953ffcSMarkus Klotzbuecher Defines the Monahans run mode to oscillator 5450b953ffcSMarkus Klotzbuecher ratio. Valid values are 8, 16, 24, 31. The core 5460b953ffcSMarkus Klotzbuecher frequency is this value multiplied by 13 MHz. 5470b953ffcSMarkus Klotzbuecher 5486d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO 5490b953ffcSMarkus Klotzbuecher 5500b953ffcSMarkus Klotzbuecher Defines the Monahans turbo mode to oscillator 5510b953ffcSMarkus Klotzbuecher ratio. Valid values are 1 (default if undefined) and 5520b953ffcSMarkus Klotzbuecher 2. The core frequency as calculated above is multiplied 5530b953ffcSMarkus Klotzbuecher by this value. 5540b953ffcSMarkus Klotzbuecher 55592bbd64eSDaniel Schwierzeck- MIPS CPU options: 55692bbd64eSDaniel Schwierzeck CONFIG_SYS_INIT_SP_OFFSET 55792bbd64eSDaniel Schwierzeck 55892bbd64eSDaniel Schwierzeck Offset relative to CONFIG_SYS_SDRAM_BASE for initial stack 55992bbd64eSDaniel Schwierzeck pointer. This is needed for the temporary stack before 56092bbd64eSDaniel Schwierzeck relocation. 56192bbd64eSDaniel Schwierzeck 56292bbd64eSDaniel Schwierzeck CONFIG_SYS_MIPS_CACHE_MODE 56392bbd64eSDaniel Schwierzeck 56492bbd64eSDaniel Schwierzeck Cache operation mode for the MIPS CPU. 56592bbd64eSDaniel Schwierzeck See also arch/mips/include/asm/mipsregs.h. 56692bbd64eSDaniel Schwierzeck Possible values are: 56792bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_NO_WA 56892bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_WA 56992bbd64eSDaniel Schwierzeck CONF_CM_UNCACHED 57092bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_NONCOHERENT 57192bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_CE 57292bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_COW 57392bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_CUW 57492bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_ACCELERATED 57592bbd64eSDaniel Schwierzeck 57692bbd64eSDaniel Schwierzeck CONFIG_SYS_XWAY_EBU_BOOTCFG 57792bbd64eSDaniel Schwierzeck 57892bbd64eSDaniel Schwierzeck Special option for Lantiq XWAY SoCs for booting from NOR flash. 57992bbd64eSDaniel Schwierzeck See also arch/mips/cpu/mips32/start.S. 58092bbd64eSDaniel Schwierzeck 58192bbd64eSDaniel Schwierzeck CONFIG_XWAY_SWAP_BYTES 58292bbd64eSDaniel Schwierzeck 58392bbd64eSDaniel Schwierzeck Enable compilation of tools/xway-swap-bytes needed for Lantiq 58492bbd64eSDaniel Schwierzeck XWAY SoCs for booting from NOR flash. The U-Boot image needs to 58592bbd64eSDaniel Schwierzeck be swapped if a flash programmer is used. 58692bbd64eSDaniel Schwierzeck 587b67d8816SChristian Riesch- ARM options: 588b67d8816SChristian Riesch CONFIG_SYS_EXCEPTION_VECTORS_HIGH 589b67d8816SChristian Riesch 590b67d8816SChristian Riesch Select high exception vectors of the ARM core, e.g., do not 591b67d8816SChristian Riesch clear the V bit of the c1 register of CP15. 592b67d8816SChristian Riesch 5935356f545SAneesh V CONFIG_SYS_THUMB_BUILD 5945356f545SAneesh V 5955356f545SAneesh V Use this flag to build U-Boot using the Thumb instruction 5965356f545SAneesh V set for ARM architectures. Thumb instruction set provides 5975356f545SAneesh V better code density. For ARM architectures that support 5985356f545SAneesh V Thumb2 this flag will result in Thumb2 code generated by 5995356f545SAneesh V GCC. 6005356f545SAneesh V 601c5d4752cSStephen Warren CONFIG_ARM_ERRATA_716044 6020678587fSStephen Warren CONFIG_ARM_ERRATA_742230 6030678587fSStephen Warren CONFIG_ARM_ERRATA_743622 6040678587fSStephen Warren CONFIG_ARM_ERRATA_751472 605f71cbfe3SNitin Garg CONFIG_ARM_ERRATA_794072 606b7588e3bSNitin Garg CONFIG_ARM_ERRATA_761320 6070678587fSStephen Warren 6080678587fSStephen Warren If set, the workarounds for these ARM errata are applied early 6090678587fSStephen Warren during U-Boot startup. Note that these options force the 6100678587fSStephen Warren workarounds to be applied; no CPU-type/version detection 6110678587fSStephen Warren exists, unlike the similar options in the Linux kernel. Do not 6120678587fSStephen Warren set these options unless they apply! 6130678587fSStephen Warren 614795659dcSStephen Warren- CPU timer options: 615795659dcSStephen Warren CONFIG_SYS_HZ 616795659dcSStephen Warren 617795659dcSStephen Warren The frequency of the timer returned by get_timer(). 618795659dcSStephen Warren get_timer() must operate in milliseconds and this CONFIG 619795659dcSStephen Warren option must be set to 1000. 620795659dcSStephen Warren 6215da627a4Swdenk- Linux Kernel Interface: 622c609719bSwdenk CONFIG_CLOCKS_IN_MHZ 623c609719bSwdenk 624c609719bSwdenk U-Boot stores all clock information in Hz 625c609719bSwdenk internally. For binary compatibility with older Linux 626c609719bSwdenk kernels (which expect the clocks passed in the 627c609719bSwdenk bd_info data to be in MHz) the environment variable 628c609719bSwdenk "clocks_in_mhz" can be defined so that U-Boot 629c609719bSwdenk converts clock data to MHZ before passing it to the 630c609719bSwdenk Linux kernel. 631c609719bSwdenk When CONFIG_CLOCKS_IN_MHZ is defined, a definition of 632c609719bSwdenk "clocks_in_mhz=1" is automatically included in the 633c609719bSwdenk default environment. 634c609719bSwdenk 6355da627a4Swdenk CONFIG_MEMSIZE_IN_BYTES [relevant for MIPS only] 6365da627a4Swdenk 63711ccc33fSMarcel Ziswiler When transferring memsize parameter to linux, some versions 6385da627a4Swdenk expect it to be in bytes, others in MB. 6395da627a4Swdenk Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes. 6405da627a4Swdenk 641fec6d9eeSGerald Van Baren CONFIG_OF_LIBFDT 642f57f70aaSWolfgang Denk 643f57f70aaSWolfgang Denk New kernel versions are expecting firmware settings to be 644213bf8c8SGerald Van Baren passed using flattened device trees (based on open firmware 645213bf8c8SGerald Van Baren concepts). 646213bf8c8SGerald Van Baren 647213bf8c8SGerald Van Baren CONFIG_OF_LIBFDT 648213bf8c8SGerald Van Baren * New libfdt-based support 649213bf8c8SGerald Van Baren * Adds the "fdt" command 6503bb342fcSKim Phillips * The bootm command automatically updates the fdt 651213bf8c8SGerald Van Baren 652b55ae402SMarcel Ziswiler OF_CPU - The proper name of the cpus node (only required for 653b55ae402SMarcel Ziswiler MPC512X and MPC5xxx based boards). 654b55ae402SMarcel Ziswiler OF_SOC - The proper name of the soc node (only required for 655b55ae402SMarcel Ziswiler MPC512X and MPC5xxx based boards). 656f57f70aaSWolfgang Denk OF_TBCLK - The timebase frequency. 657c2871f03SKumar Gala OF_STDOUT_PATH - The path to the console device 658f57f70aaSWolfgang Denk 65911ccc33fSMarcel Ziswiler boards with QUICC Engines require OF_QE to set UCC MAC 66011ccc33fSMarcel Ziswiler addresses 6613bb342fcSKim Phillips 6624e253137SKumar Gala CONFIG_OF_BOARD_SETUP 6634e253137SKumar Gala 6644e253137SKumar Gala Board code has addition modification that it wants to make 6654e253137SKumar Gala to the flat device tree before handing it off to the kernel 6666705d81eSwdenk 6670267768eSMatthew McClintock CONFIG_OF_BOOT_CPU 6680267768eSMatthew McClintock 66911ccc33fSMarcel Ziswiler This define fills in the correct boot CPU in the boot 6700267768eSMatthew McClintock param header, the default value is zero if undefined. 6710267768eSMatthew McClintock 6723887c3fbSHeiko Schocher CONFIG_OF_IDE_FIXUP 6733887c3fbSHeiko Schocher 6743887c3fbSHeiko Schocher U-Boot can detect if an IDE device is present or not. 6753887c3fbSHeiko Schocher If not, and this new config option is activated, U-Boot 6763887c3fbSHeiko Schocher removes the ATA node from the DTS before booting Linux, 6773887c3fbSHeiko Schocher so the Linux IDE driver does not probe the device and 6783887c3fbSHeiko Schocher crash. This is needed for buggy hardware (uc101) where 6793887c3fbSHeiko Schocher no pull down resistor is connected to the signal IDE5V_DD7. 6803887c3fbSHeiko Schocher 6817eb29398SIgor Grinberg CONFIG_MACH_TYPE [relevant for ARM only][mandatory] 6827eb29398SIgor Grinberg 6837eb29398SIgor Grinberg This setting is mandatory for all boards that have only one 6847eb29398SIgor Grinberg machine type and must be used to specify the machine type 6857eb29398SIgor Grinberg number as it appears in the ARM machine registry 6867eb29398SIgor Grinberg (see http://www.arm.linux.org.uk/developer/machines/). 6877eb29398SIgor Grinberg Only boards that have multiple machine types supported 6887eb29398SIgor Grinberg in a single configuration file and the machine type is 6897eb29398SIgor Grinberg runtime discoverable, do not have to use this setting. 6907eb29398SIgor Grinberg 6910b2f4ecaSNiklaus Giger- vxWorks boot parameters: 6920b2f4ecaSNiklaus Giger 6930b2f4ecaSNiklaus Giger bootvx constructs a valid bootline using the following 6940b2f4ecaSNiklaus Giger environments variables: bootfile, ipaddr, serverip, hostname. 6950b2f4ecaSNiklaus Giger It loads the vxWorks image pointed bootfile. 6960b2f4ecaSNiklaus Giger 6970b2f4ecaSNiklaus Giger CONFIG_SYS_VXWORKS_BOOT_DEVICE - The vxworks device name 6980b2f4ecaSNiklaus Giger CONFIG_SYS_VXWORKS_MAC_PTR - Ethernet 6 byte MA -address 6990b2f4ecaSNiklaus Giger CONFIG_SYS_VXWORKS_SERVERNAME - Name of the server 7000b2f4ecaSNiklaus Giger CONFIG_SYS_VXWORKS_BOOT_ADDR - Address of boot parameters 7010b2f4ecaSNiklaus Giger 7020b2f4ecaSNiklaus Giger CONFIG_SYS_VXWORKS_ADD_PARAMS 7030b2f4ecaSNiklaus Giger 7040b2f4ecaSNiklaus Giger Add it at the end of the bootline. E.g "u=username pw=secret" 7050b2f4ecaSNiklaus Giger 7060b2f4ecaSNiklaus Giger Note: If a "bootargs" environment is defined, it will overwride 7070b2f4ecaSNiklaus Giger the defaults discussed just above. 7080b2f4ecaSNiklaus Giger 7092c451f78SAneesh V- Cache Configuration: 7102c451f78SAneesh V CONFIG_SYS_ICACHE_OFF - Do not enable instruction cache in U-Boot 7112c451f78SAneesh V CONFIG_SYS_DCACHE_OFF - Do not enable data cache in U-Boot 7122c451f78SAneesh V CONFIG_SYS_L2CACHE_OFF- Do not enable L2 cache in U-Boot 7132c451f78SAneesh V 71493bc2193SAneesh V- Cache Configuration for ARM: 71593bc2193SAneesh V CONFIG_SYS_L2_PL310 - Enable support for ARM PL310 L2 cache 71693bc2193SAneesh V controller 71793bc2193SAneesh V CONFIG_SYS_PL310_BASE - Physical base address of PL310 71893bc2193SAneesh V controller register space 71993bc2193SAneesh V 7206705d81eSwdenk- Serial Ports: 72148d0192fSAndreas Engel CONFIG_PL010_SERIAL 7226705d81eSwdenk 7236705d81eSwdenk Define this if you want support for Amba PrimeCell PL010 UARTs. 7246705d81eSwdenk 72548d0192fSAndreas Engel CONFIG_PL011_SERIAL 7266705d81eSwdenk 7276705d81eSwdenk Define this if you want support for Amba PrimeCell PL011 UARTs. 7286705d81eSwdenk 7296705d81eSwdenk CONFIG_PL011_CLOCK 7306705d81eSwdenk 7316705d81eSwdenk If you have Amba PrimeCell PL011 UARTs, set this variable to 7326705d81eSwdenk the clock speed of the UARTs. 7336705d81eSwdenk 7346705d81eSwdenk CONFIG_PL01x_PORTS 7356705d81eSwdenk 7366705d81eSwdenk If you have Amba PrimeCell PL010 or PL011 UARTs on your board, 7376705d81eSwdenk define this to a list of base addresses for each (supported) 7386705d81eSwdenk port. See e.g. include/configs/versatile.h 7396705d81eSwdenk 740910f1ae3SJohn Rigby CONFIG_PL011_SERIAL_RLCR 741910f1ae3SJohn Rigby 742910f1ae3SJohn Rigby Some vendor versions of PL011 serial ports (e.g. ST-Ericsson U8500) 743910f1ae3SJohn Rigby have separate receive and transmit line control registers. Set 744910f1ae3SJohn Rigby this variable to initialize the extra register. 745910f1ae3SJohn Rigby 746910f1ae3SJohn Rigby CONFIG_PL011_SERIAL_FLUSH_ON_INIT 747910f1ae3SJohn Rigby 748910f1ae3SJohn Rigby On some platforms (e.g. U8500) U-Boot is loaded by a second stage 749910f1ae3SJohn Rigby boot loader that has already initialized the UART. Define this 750910f1ae3SJohn Rigby variable to flush the UART at init time. 751910f1ae3SJohn Rigby 752d57dee57SKaricheri, Muralidharan CONFIG_SERIAL_HW_FLOW_CONTROL 753d57dee57SKaricheri, Muralidharan 754d57dee57SKaricheri, Muralidharan Define this variable to enable hw flow control in serial driver. 755d57dee57SKaricheri, Muralidharan Current user of this option is drivers/serial/nsl16550.c driver 7566705d81eSwdenk 757c609719bSwdenk- Console Interface: 758c609719bSwdenk Depending on board, define exactly one serial port 759c609719bSwdenk (like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2, 760c609719bSwdenk CONFIG_8xx_CONS_SCC1, ...), or switch off the serial 761c609719bSwdenk console by defining CONFIG_8xx_CONS_NONE 762c609719bSwdenk 763c609719bSwdenk Note: if CONFIG_8xx_CONS_NONE is defined, the serial 764c609719bSwdenk port routines must be defined elsewhere 765c609719bSwdenk (i.e. serial_init(), serial_getc(), ...) 766c609719bSwdenk 767c609719bSwdenk CONFIG_CFB_CONSOLE 768c609719bSwdenk Enables console device for a color framebuffer. Needs following 769c53043b7SWolfgang Denk defines (cf. smiLynxEM, i8042) 770c609719bSwdenk VIDEO_FB_LITTLE_ENDIAN graphic memory organisation 771c609719bSwdenk (default big endian) 772c609719bSwdenk VIDEO_HW_RECTFILL graphic chip supports 773c609719bSwdenk rectangle fill 774c609719bSwdenk (cf. smiLynxEM) 775c609719bSwdenk VIDEO_HW_BITBLT graphic chip supports 776c609719bSwdenk bit-blit (cf. smiLynxEM) 777c609719bSwdenk VIDEO_VISIBLE_COLS visible pixel columns 778c609719bSwdenk (cols=pitch) 779c609719bSwdenk VIDEO_VISIBLE_ROWS visible pixel rows 780c609719bSwdenk VIDEO_PIXEL_SIZE bytes per pixel 781c609719bSwdenk VIDEO_DATA_FORMAT graphic data format 782c609719bSwdenk (0-5, cf. cfb_console.c) 783c609719bSwdenk VIDEO_FB_ADRS framebuffer address 784c609719bSwdenk VIDEO_KBD_INIT_FCT keyboard int fct 785c609719bSwdenk (i.e. i8042_kbd_init()) 786c609719bSwdenk VIDEO_TSTC_FCT test char fct 787c609719bSwdenk (i.e. i8042_tstc) 788c609719bSwdenk VIDEO_GETC_FCT get char fct 789c609719bSwdenk (i.e. i8042_getc) 790c609719bSwdenk CONFIG_CONSOLE_CURSOR cursor drawing on/off 791c609719bSwdenk (requires blink timer 792c609719bSwdenk cf. i8042.c) 7936d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_CONSOLE_BLINK_COUNT blink interval (cf. i8042.c) 794c609719bSwdenk CONFIG_CONSOLE_TIME display time/date info in 795c609719bSwdenk upper right corner 796602ad3b3SJon Loeliger (requires CONFIG_CMD_DATE) 797c609719bSwdenk CONFIG_VIDEO_LOGO display Linux logo in 798c609719bSwdenk upper left corner 799a6c7ad2fSwdenk CONFIG_VIDEO_BMP_LOGO use bmp_logo.h instead of 800a6c7ad2fSwdenk linux_logo.h for logo. 801a6c7ad2fSwdenk Requires CONFIG_VIDEO_LOGO 802c609719bSwdenk CONFIG_CONSOLE_EXTRA_INFO 80311ccc33fSMarcel Ziswiler additional board info beside 804c609719bSwdenk the logo 805c609719bSwdenk 80633a35bbbSPali Rohár When CONFIG_CFB_CONSOLE_ANSI is defined, console will support 80733a35bbbSPali Rohár a limited number of ANSI escape sequences (cursor control, 80833a35bbbSPali Rohár erase functions and limited graphics rendition control). 80933a35bbbSPali Rohár 810c609719bSwdenk When CONFIG_CFB_CONSOLE is defined, video console is 811c609719bSwdenk default i/o. Serial console can be forced with 812c609719bSwdenk environment 'console=serial'. 813c609719bSwdenk 814a3ad8e26Swdenk When CONFIG_SILENT_CONSOLE is defined, all console 815a3ad8e26Swdenk messages (by U-Boot and Linux!) can be silenced with 816a3ad8e26Swdenk the "silent" environment variable. See 817a3ad8e26Swdenk doc/README.silent for more information. 818a3ad8e26Swdenk 81945ae2546SHeiko Schocher CONFIG_SYS_CONSOLE_BG_COL: define the backgroundcolor, default 82045ae2546SHeiko Schocher is 0x00. 82145ae2546SHeiko Schocher CONFIG_SYS_CONSOLE_FG_COL: define the foregroundcolor, default 82245ae2546SHeiko Schocher is 0xa0. 82345ae2546SHeiko Schocher 824c609719bSwdenk- Console Baudrate: 825c609719bSwdenk CONFIG_BAUDRATE - in bps 826c609719bSwdenk Select one of the baudrates listed in 8276d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_BAUDRATE_TABLE, see below. 8286d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_BRGCLK_PRESCALE, baudrate prescale 829c609719bSwdenk 830c92fac91SHeiko Schocher- Console Rx buffer length 831c92fac91SHeiko Schocher With CONFIG_SYS_SMC_RXBUFLEN it is possible to define 832c92fac91SHeiko Schocher the maximum receive buffer length for the SMC. 8332b3f12c2SHeiko Schocher This option is actual only for 82xx and 8xx possible. 834c92fac91SHeiko Schocher If using CONFIG_SYS_SMC_RXBUFLEN also CONFIG_SYS_MAXIDLE 835c92fac91SHeiko Schocher must be defined, to setup the maximum idle timeout for 836c92fac91SHeiko Schocher the SMC. 837c92fac91SHeiko Schocher 8389558b48aSGraeme Russ- Pre-Console Buffer: 8399558b48aSGraeme Russ Prior to the console being initialised (i.e. serial UART 8409558b48aSGraeme Russ initialised etc) all console output is silently discarded. 8419558b48aSGraeme Russ Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to 8429558b48aSGraeme Russ buffer any console messages prior to the console being 8439558b48aSGraeme Russ initialised to a buffer of size CONFIG_PRE_CON_BUF_SZ 8449558b48aSGraeme Russ bytes located at CONFIG_PRE_CON_BUF_ADDR. The buffer is 8459558b48aSGraeme Russ a circular buffer, so if more than CONFIG_PRE_CON_BUF_SZ 8469558b48aSGraeme Russ bytes are output before the console is initialised, the 8479558b48aSGraeme Russ earlier bytes are discarded. 8489558b48aSGraeme Russ 8499558b48aSGraeme Russ 'Sane' compilers will generate smaller code if 8509558b48aSGraeme Russ CONFIG_PRE_CON_BUF_SZ is a power of 2 8519558b48aSGraeme Russ 852046a37bdSSonny Rao- Safe printf() functions 853046a37bdSSonny Rao Define CONFIG_SYS_VSNPRINTF to compile in safe versions of 854046a37bdSSonny Rao the printf() functions. These are defined in 855046a37bdSSonny Rao include/vsprintf.h and include snprintf(), vsnprintf() and 856046a37bdSSonny Rao so on. Code size increase is approximately 300-500 bytes. 857046a37bdSSonny Rao If this option is not given then these functions will 858046a37bdSSonny Rao silently discard their buffer size argument - this means 859046a37bdSSonny Rao you are not getting any overflow checking in this case. 860046a37bdSSonny Rao 861c609719bSwdenk- Boot Delay: CONFIG_BOOTDELAY - in seconds 862c609719bSwdenk Delay before automatically booting the default image; 863c609719bSwdenk set to -1 to disable autoboot. 86493d7212fSJoe Hershberger set to -2 to autoboot with no delay and not check for abort 86593d7212fSJoe Hershberger (even when CONFIG_ZERO_BOOTDELAY_CHECK is defined). 866c609719bSwdenk 867c609719bSwdenk See doc/README.autoboot for these options that 868c609719bSwdenk work with CONFIG_BOOTDELAY. None are required. 869c609719bSwdenk CONFIG_BOOT_RETRY_TIME 870c609719bSwdenk CONFIG_BOOT_RETRY_MIN 871c609719bSwdenk CONFIG_AUTOBOOT_KEYED 872c609719bSwdenk CONFIG_AUTOBOOT_PROMPT 873c609719bSwdenk CONFIG_AUTOBOOT_DELAY_STR 874c609719bSwdenk CONFIG_AUTOBOOT_STOP_STR 875c609719bSwdenk CONFIG_AUTOBOOT_DELAY_STR2 876c609719bSwdenk CONFIG_AUTOBOOT_STOP_STR2 877c609719bSwdenk CONFIG_ZERO_BOOTDELAY_CHECK 878c609719bSwdenk CONFIG_RESET_TO_RETRY 879c609719bSwdenk 880c609719bSwdenk- Autoboot Command: 881c609719bSwdenk CONFIG_BOOTCOMMAND 882c609719bSwdenk Only needed when CONFIG_BOOTDELAY is enabled; 883c609719bSwdenk define a command string that is automatically executed 884c609719bSwdenk when no character is read on the console interface 885c609719bSwdenk within "Boot Delay" after reset. 886c609719bSwdenk 887c609719bSwdenk CONFIG_BOOTARGS 888c609719bSwdenk This can be used to pass arguments to the bootm 889c609719bSwdenk command. The value of CONFIG_BOOTARGS goes into the 890c609719bSwdenk environment value "bootargs". 891c609719bSwdenk 892c609719bSwdenk CONFIG_RAMBOOT and CONFIG_NFSBOOT 893c609719bSwdenk The value of these goes into the environment as 894c609719bSwdenk "ramboot" and "nfsboot" respectively, and can be used 895c609719bSwdenk as a convenience, when switching between booting from 89611ccc33fSMarcel Ziswiler RAM and NFS. 897c609719bSwdenk 898eda0ba38SHeiko Schocher- Bootcount: 899eda0ba38SHeiko Schocher CONFIG_BOOTCOUNT_LIMIT 900eda0ba38SHeiko Schocher Implements a mechanism for detecting a repeating reboot 901eda0ba38SHeiko Schocher cycle, see: 902eda0ba38SHeiko Schocher http://www.denx.de/wiki/view/DULG/UBootBootCountLimit 903eda0ba38SHeiko Schocher 904eda0ba38SHeiko Schocher CONFIG_BOOTCOUNT_ENV 905eda0ba38SHeiko Schocher If no softreset save registers are found on the hardware 906eda0ba38SHeiko Schocher "bootcount" is stored in the environment. To prevent a 907eda0ba38SHeiko Schocher saveenv on all reboots, the environment variable 908eda0ba38SHeiko Schocher "upgrade_available" is used. If "upgrade_available" is 909eda0ba38SHeiko Schocher 0, "bootcount" is always 0, if "upgrade_available" is 910eda0ba38SHeiko Schocher 1 "bootcount" is incremented in the environment. 911eda0ba38SHeiko Schocher So the Userspace Applikation must set the "upgrade_available" 912eda0ba38SHeiko Schocher and "bootcount" variable to 0, if a boot was successfully. 913eda0ba38SHeiko Schocher 914c609719bSwdenk- Pre-Boot Commands: 915c609719bSwdenk CONFIG_PREBOOT 916c609719bSwdenk 917c609719bSwdenk When this option is #defined, the existence of the 918c609719bSwdenk environment variable "preboot" will be checked 919c609719bSwdenk immediately before starting the CONFIG_BOOTDELAY 920c609719bSwdenk countdown and/or running the auto-boot command resp. 921c609719bSwdenk entering interactive mode. 922c609719bSwdenk 923c609719bSwdenk This feature is especially useful when "preboot" is 924c609719bSwdenk automatically generated or modified. For an example 925c609719bSwdenk see the LWMON board specific code: here "preboot" is 926c609719bSwdenk modified when the user holds down a certain 927c609719bSwdenk combination of keys on the (special) keyboard when 928c609719bSwdenk booting the systems 929c609719bSwdenk 930c609719bSwdenk- Serial Download Echo Mode: 931c609719bSwdenk CONFIG_LOADS_ECHO 932c609719bSwdenk If defined to 1, all characters received during a 933c609719bSwdenk serial download (using the "loads" command) are 934c609719bSwdenk echoed back. This might be needed by some terminal 935c609719bSwdenk emulations (like "cu"), but may as well just take 936c609719bSwdenk time on others. This setting #define's the initial 937c609719bSwdenk value of the "loads_echo" environment variable. 938c609719bSwdenk 939602ad3b3SJon Loeliger- Kgdb Serial Baudrate: (if CONFIG_CMD_KGDB is defined) 940c609719bSwdenk CONFIG_KGDB_BAUDRATE 941c609719bSwdenk Select one of the baudrates listed in 9426d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_BAUDRATE_TABLE, see below. 943c609719bSwdenk 944c609719bSwdenk- Monitor Functions: 945602ad3b3SJon Loeliger Monitor commands can be included or excluded 946602ad3b3SJon Loeliger from the build by using the #include files 947c6c621bdSStephen Warren <config_cmd_all.h> and #undef'ing unwanted 948c6c621bdSStephen Warren commands, or using <config_cmd_default.h> 949602ad3b3SJon Loeliger and augmenting with additional #define's 950602ad3b3SJon Loeliger for wanted commands. 951c609719bSwdenk 952602ad3b3SJon Loeliger The default command configuration includes all commands 953602ad3b3SJon Loeliger except those marked below with a "*". 954602ad3b3SJon Loeliger 955b401b73dSMarek Vasut CONFIG_CMD_AES AES 128 CBC encrypt/decrypt 956602ad3b3SJon Loeliger CONFIG_CMD_ASKENV * ask for env variable 957602ad3b3SJon Loeliger CONFIG_CMD_BDI bdinfo 958602ad3b3SJon Loeliger CONFIG_CMD_BEDBUG * Include BedBug Debugger 959602ad3b3SJon Loeliger CONFIG_CMD_BMP * BMP support 960602ad3b3SJon Loeliger CONFIG_CMD_BSP * Board specific commands 961602ad3b3SJon Loeliger CONFIG_CMD_BOOTD bootd 962602ad3b3SJon Loeliger CONFIG_CMD_CACHE * icache, dcache 96308d0d6f3SMichal Simek CONFIG_CMD_CLK * clock command support 964602ad3b3SJon Loeliger CONFIG_CMD_CONSOLE coninfo 965710b9938SMike Frysinger CONFIG_CMD_CRC32 * crc32 966602ad3b3SJon Loeliger CONFIG_CMD_DATE * support for RTC, date/time... 967602ad3b3SJon Loeliger CONFIG_CMD_DHCP * DHCP support 968602ad3b3SJon Loeliger CONFIG_CMD_DIAG * Diagnostics 969a7c93104SPeter Tyser CONFIG_CMD_DS4510 * ds4510 I2C gpio commands 970a7c93104SPeter Tyser CONFIG_CMD_DS4510_INFO * ds4510 I2C info command 971a7c93104SPeter Tyser CONFIG_CMD_DS4510_MEM * ds4510 I2C eeprom/sram commansd 972a7c93104SPeter Tyser CONFIG_CMD_DS4510_RST * ds4510 I2C rst command 973602ad3b3SJon Loeliger CONFIG_CMD_DTT * Digital Therm and Thermostat 974602ad3b3SJon Loeliger CONFIG_CMD_ECHO echo arguments 975246c6922SPeter Tyser CONFIG_CMD_EDITENV edit env variable 976602ad3b3SJon Loeliger CONFIG_CMD_EEPROM * EEPROM read/write support 977602ad3b3SJon Loeliger CONFIG_CMD_ELF * bootelf, bootvx 9785e2b3e0cSJoe Hershberger CONFIG_CMD_ENV_CALLBACK * display details about env callbacks 979fffad71bSJoe Hershberger CONFIG_CMD_ENV_FLAGS * display details about env flags 98088733e2cSAndrew Ruder CONFIG_CMD_ENV_EXISTS * check existence of env variable 9810c79cda0SMike Frysinger CONFIG_CMD_EXPORTENV * export the environment 98203e2ecf6SStephen Warren CONFIG_CMD_EXT2 * ext2 command support 98303e2ecf6SStephen Warren CONFIG_CMD_EXT4 * ext4 command support 98416f4d933SStephen Warren CONFIG_CMD_FS_GENERIC * filesystem commands (e.g. load, ls) 98516f4d933SStephen Warren that work for multiple fs types 986bdab39d3SMike Frysinger CONFIG_CMD_SAVEENV saveenv 987602ad3b3SJon Loeliger CONFIG_CMD_FDC * Floppy Disk Support 98803e2ecf6SStephen Warren CONFIG_CMD_FAT * FAT command support 989602ad3b3SJon Loeliger CONFIG_CMD_FLASH flinfo, erase, protect 990602ad3b3SJon Loeliger CONFIG_CMD_FPGA FPGA device initialization support 9914d98b5c8SVincent Stehlé CONFIG_CMD_FUSE * Device fuse support 99253fdc7efSAnton Staaf CONFIG_CMD_GETTIME * Get time since boot 993a641b979SMike Frysinger CONFIG_CMD_GO * the 'go' command (exec code) 994a000b795SKim Phillips CONFIG_CMD_GREPENV * search environment 995bf36c5d5SSimon Glass CONFIG_CMD_HASH * calculate hash / digest 996602ad3b3SJon Loeliger CONFIG_CMD_HWFLOW * RTS/CTS hw flow control 997602ad3b3SJon Loeliger CONFIG_CMD_I2C * I2C serial bus support 998602ad3b3SJon Loeliger CONFIG_CMD_IDE * IDE harddisk support 999602ad3b3SJon Loeliger CONFIG_CMD_IMI iminfo 10008fdf1e0fSVipin Kumar CONFIG_CMD_IMLS List all images found in NOR flash 10014d98b5c8SVincent Stehlé CONFIG_CMD_IMLS_NAND * List all images found in NAND flash 1002602ad3b3SJon Loeliger CONFIG_CMD_IMMAP * IMMR dump support 1003aa53233aSSimon Glass CONFIG_CMD_IOTRACE * I/O tracing for debugging 10040c79cda0SMike Frysinger CONFIG_CMD_IMPORTENV * import an environment 1005c167cc02SJoe Hershberger CONFIG_CMD_INI * import data from an ini file into the env 1006602ad3b3SJon Loeliger CONFIG_CMD_IRQ * irqinfo 1007602ad3b3SJon Loeliger CONFIG_CMD_ITEST Integer/string test of 2 values 1008602ad3b3SJon Loeliger CONFIG_CMD_JFFS2 * JFFS2 Support 1009602ad3b3SJon Loeliger CONFIG_CMD_KGDB * kgdb 10104d98b5c8SVincent Stehlé CONFIG_CMD_LDRINFO * ldrinfo (display Blackfin loader) 1011d22c338eSJoe Hershberger CONFIG_CMD_LINK_LOCAL * link-local IP address auto-configuration 1012d22c338eSJoe Hershberger (169.254.*.*) 1013602ad3b3SJon Loeliger CONFIG_CMD_LOADB loadb 1014602ad3b3SJon Loeliger CONFIG_CMD_LOADS loads 10154d98b5c8SVincent Stehlé CONFIG_CMD_MD5SUM * print md5 message digest 101602c9aa1dSRobin Getz (requires CONFIG_CMD_MEMORY and CONFIG_MD5) 101715a33e49SSimon Glass CONFIG_CMD_MEMINFO * Display detailed memory information 1018602ad3b3SJon Loeliger CONFIG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, 1019a2681707SWolfgang Denk loop, loopw 10204d98b5c8SVincent Stehlé CONFIG_CMD_MEMTEST * mtest 1021602ad3b3SJon Loeliger CONFIG_CMD_MISC Misc functions like sleep etc 1022602ad3b3SJon Loeliger CONFIG_CMD_MMC * MMC memory mapped support 1023602ad3b3SJon Loeliger CONFIG_CMD_MII * MII utility commands 102468d7d651SStefan Roese CONFIG_CMD_MTDPARTS * MTD partition support 1025602ad3b3SJon Loeliger CONFIG_CMD_NAND * NAND support 1026602ad3b3SJon Loeliger CONFIG_CMD_NET bootp, tftpboot, rarpboot 10274d98b5c8SVincent Stehlé CONFIG_CMD_NFS NFS support 1028e92739d3SPeter Tyser CONFIG_CMD_PCA953X * PCA953x I2C gpio commands 1029e92739d3SPeter Tyser CONFIG_CMD_PCA953X_INFO * PCA953x I2C gpio info command 1030602ad3b3SJon Loeliger CONFIG_CMD_PCI * pciinfo 1031602ad3b3SJon Loeliger CONFIG_CMD_PCMCIA * PCMCIA support 1032602ad3b3SJon Loeliger CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network 1033602ad3b3SJon Loeliger host 1034602ad3b3SJon Loeliger CONFIG_CMD_PORTIO * Port I/O 1035ff048ea9SKenneth Waters CONFIG_CMD_READ * Read raw data from partition 1036602ad3b3SJon Loeliger CONFIG_CMD_REGINFO * Register dump 1037602ad3b3SJon Loeliger CONFIG_CMD_RUN run command in env variable 1038d304931fSSimon Glass CONFIG_CMD_SANDBOX * sb command to access sandbox features 1039602ad3b3SJon Loeliger CONFIG_CMD_SAVES * save S record dump 1040602ad3b3SJon Loeliger CONFIG_CMD_SCSI * SCSI Support 1041602ad3b3SJon Loeliger CONFIG_CMD_SDRAM * print SDRAM configuration information 1042602ad3b3SJon Loeliger (requires CONFIG_CMD_I2C) 1043602ad3b3SJon Loeliger CONFIG_CMD_SETGETDCR Support for DCR Register access 1044602ad3b3SJon Loeliger (4xx only) 1045f61ec45eSEric Nelson CONFIG_CMD_SF * Read/write/erase SPI NOR flash 10464d98b5c8SVincent Stehlé CONFIG_CMD_SHA1SUM * print sha1 memory digest 104702c9aa1dSRobin Getz (requires CONFIG_CMD_MEMORY) 10487d861d95SBob Liu CONFIG_CMD_SOFTSWITCH * Soft switch setting command for BF60x 104974de7aefSWolfgang Denk CONFIG_CMD_SOURCE "source" command Support 1050602ad3b3SJon Loeliger CONFIG_CMD_SPI * SPI serial bus support 10517a83af07SLuca Ceresoli CONFIG_CMD_TFTPSRV * TFTP transfer in server mode 10521fb7cd49SSimon Glass CONFIG_CMD_TFTPPUT * TFTP put command (upload) 1053da83bcd7SJoe Hershberger CONFIG_CMD_TIME * run command and report execution time (ARM specific) 1054da83bcd7SJoe Hershberger CONFIG_CMD_TIMER * access to the system tick timer 1055602ad3b3SJon Loeliger CONFIG_CMD_USB * USB support 1056602ad3b3SJon Loeliger CONFIG_CMD_CDP * Cisco Discover Protocol support 1057c8339f51SMarek Vasut CONFIG_CMD_MFSL * Microblaze FSL support 10584d98b5c8SVincent Stehlé CONFIG_CMD_XIMG Load part of Multi Image 105989c8230dSPrzemyslaw Marczak CONFIG_CMD_UUID * Generate random UUID or GUID string 1060c609719bSwdenk 1061c609719bSwdenk EXAMPLE: If you want all functions except of network 1062c609719bSwdenk support you can write: 1063c609719bSwdenk 1064602ad3b3SJon Loeliger #include "config_cmd_all.h" 1065602ad3b3SJon Loeliger #undef CONFIG_CMD_NET 1066c609719bSwdenk 1067213bf8c8SGerald Van Baren Other Commands: 1068213bf8c8SGerald Van Baren fdt (flattened device tree) command: CONFIG_OF_LIBFDT 1069c609719bSwdenk 1070c609719bSwdenk Note: Don't enable the "icache" and "dcache" commands 1071602ad3b3SJon Loeliger (configuration option CONFIG_CMD_CACHE) unless you know 1072c609719bSwdenk what you (and your U-Boot users) are doing. Data 1073c609719bSwdenk cache cannot be enabled on systems like the 8xx or 1074c609719bSwdenk 8260 (where accesses to the IMMR region must be 1075c609719bSwdenk uncached), and it cannot be disabled on all other 1076c609719bSwdenk systems where we (mis-) use the data cache to hold an 1077c609719bSwdenk initial stack and some data. 1078c609719bSwdenk 1079c609719bSwdenk 1080c609719bSwdenk XXX - this list needs to get updated! 1081c609719bSwdenk 1082a5ecbe62SWolfgang Denk- Regular expression support: 1083a5ecbe62SWolfgang Denk CONFIG_REGEX 1084a5ecbe62SWolfgang Denk If this variable is defined, U-Boot is linked against 1085a5ecbe62SWolfgang Denk the SLRE (Super Light Regular Expression) library, 1086a5ecbe62SWolfgang Denk which adds regex support to some commands, as for 1087a5ecbe62SWolfgang Denk example "env grep" and "setexpr". 1088a5ecbe62SWolfgang Denk 108945ba8077SSimon Glass- Device tree: 109045ba8077SSimon Glass CONFIG_OF_CONTROL 109145ba8077SSimon Glass If this variable is defined, U-Boot will use a device tree 109245ba8077SSimon Glass to configure its devices, instead of relying on statically 109345ba8077SSimon Glass compiled #defines in the board file. This option is 109445ba8077SSimon Glass experimental and only available on a few boards. The device 109545ba8077SSimon Glass tree is available in the global data as gd->fdt_blob. 109645ba8077SSimon Glass 10972c0f79e4SSimon Glass U-Boot needs to get its device tree from somewhere. This can 10982c0f79e4SSimon Glass be done using one of the two options below: 1099bbb0b128SSimon Glass 1100bbb0b128SSimon Glass CONFIG_OF_EMBED 1101bbb0b128SSimon Glass If this variable is defined, U-Boot will embed a device tree 1102bbb0b128SSimon Glass binary in its image. This device tree file should be in the 1103bbb0b128SSimon Glass board directory and called <soc>-<board>.dts. The binary file 1104bbb0b128SSimon Glass is then picked up in board_init_f() and made available through 1105bbb0b128SSimon Glass the global data structure as gd->blob. 110645ba8077SSimon Glass 11072c0f79e4SSimon Glass CONFIG_OF_SEPARATE 11082c0f79e4SSimon Glass If this variable is defined, U-Boot will build a device tree 11092c0f79e4SSimon Glass binary. It will be called u-boot.dtb. Architecture-specific 11102c0f79e4SSimon Glass code will locate it at run-time. Generally this works by: 11112c0f79e4SSimon Glass 11122c0f79e4SSimon Glass cat u-boot.bin u-boot.dtb >image.bin 11132c0f79e4SSimon Glass 11142c0f79e4SSimon Glass and in fact, U-Boot does this for you, creating a file called 11152c0f79e4SSimon Glass u-boot-dtb.bin which is useful in the common case. You can 11162c0f79e4SSimon Glass still use the individual files if you need something more 11172c0f79e4SSimon Glass exotic. 11182c0f79e4SSimon Glass 1119c609719bSwdenk- Watchdog: 1120c609719bSwdenk CONFIG_WATCHDOG 1121c609719bSwdenk If this variable is defined, it enables watchdog 11226abe6fb6SDetlev Zundel support for the SoC. There must be support in the SoC 11236abe6fb6SDetlev Zundel specific code for a watchdog. For the 8xx and 8260 11246abe6fb6SDetlev Zundel CPUs, the SIU Watchdog feature is enabled in the SYPCR 11256abe6fb6SDetlev Zundel register. When supported for a specific SoC is 11266abe6fb6SDetlev Zundel available, then no further board specific code should 11276abe6fb6SDetlev Zundel be needed to use it. 11286abe6fb6SDetlev Zundel 11296abe6fb6SDetlev Zundel CONFIG_HW_WATCHDOG 11306abe6fb6SDetlev Zundel When using a watchdog circuitry external to the used 11316abe6fb6SDetlev Zundel SoC, then define this variable and provide board 11326abe6fb6SDetlev Zundel specific code for the "hw_watchdog_reset" function. 1133c609719bSwdenk 1134c1551ea8Sstroese- U-Boot Version: 1135c1551ea8Sstroese CONFIG_VERSION_VARIABLE 1136c1551ea8Sstroese If this variable is defined, an environment variable 1137c1551ea8Sstroese named "ver" is created by U-Boot showing the U-Boot 1138c1551ea8Sstroese version as printed by the "version" command. 1139a1ea8e51SBenoît Thébaudeau Any change to this variable will be reverted at the 1140a1ea8e51SBenoît Thébaudeau next reset. 1141c1551ea8Sstroese 1142c609719bSwdenk- Real-Time Clock: 1143c609719bSwdenk 1144602ad3b3SJon Loeliger When CONFIG_CMD_DATE is selected, the type of the RTC 1145c609719bSwdenk has to be selected, too. Define exactly one of the 1146c609719bSwdenk following options: 1147c609719bSwdenk 1148c609719bSwdenk CONFIG_RTC_MPC8xx - use internal RTC of MPC8xx 1149c609719bSwdenk CONFIG_RTC_PCF8563 - use Philips PCF8563 RTC 11504e8b7544SFabio Estevam CONFIG_RTC_MC13XXX - use MC13783 or MC13892 RTC 1151c609719bSwdenk CONFIG_RTC_MC146818 - use MC146818 RTC 11521cb8e980Swdenk CONFIG_RTC_DS1307 - use Maxim, Inc. DS1307 RTC 1153c609719bSwdenk CONFIG_RTC_DS1337 - use Maxim, Inc. DS1337 RTC 11547f70e853Swdenk CONFIG_RTC_DS1338 - use Maxim, Inc. DS1338 RTC 11553bac3513Swdenk CONFIG_RTC_DS164x - use Dallas DS164x RTC 11569536dfccSTor Krill CONFIG_RTC_ISL1208 - use Intersil ISL1208 RTC 11574c0d4c3bSwdenk CONFIG_RTC_MAX6900 - use Maxim, Inc. MAX6900 RTC 11586d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_RTC_DS1337_NOOSC - Turn off the OSC output for DS1337 115971d19f30SHeiko Schocher CONFIG_SYS_RV3029_TCR - enable trickle charger on 116071d19f30SHeiko Schocher RV3029 RTC. 1161c609719bSwdenk 1162b37c7e5eSwdenk Note that if the RTC uses I2C, then the I2C interface 1163b37c7e5eSwdenk must also be configured. See I2C Support, below. 1164b37c7e5eSwdenk 1165e92739d3SPeter Tyser- GPIO Support: 1166e92739d3SPeter Tyser CONFIG_PCA953X - use NXP's PCA953X series I2C GPIO 1167e92739d3SPeter Tyser 11685dec49caSChris Packham The CONFIG_SYS_I2C_PCA953X_WIDTH option specifies a list of 11695dec49caSChris Packham chip-ngpio pairs that tell the PCA953X driver the number of 11705dec49caSChris Packham pins supported by a particular chip. 11715dec49caSChris Packham 1172e92739d3SPeter Tyser Note that if the GPIO device uses I2C, then the I2C interface 1173e92739d3SPeter Tyser must also be configured. See I2C Support, below. 1174e92739d3SPeter Tyser 1175aa53233aSSimon Glass- I/O tracing: 1176aa53233aSSimon Glass When CONFIG_IO_TRACE is selected, U-Boot intercepts all I/O 1177aa53233aSSimon Glass accesses and can checksum them or write a list of them out 1178aa53233aSSimon Glass to memory. See the 'iotrace' command for details. This is 1179aa53233aSSimon Glass useful for testing device drivers since it can confirm that 1180aa53233aSSimon Glass the driver behaves the same way before and after a code 1181aa53233aSSimon Glass change. Currently this is supported on sandbox and arm. To 1182aa53233aSSimon Glass add support for your architecture, add '#include <iotrace.h>' 1183aa53233aSSimon Glass to the bottom of arch/<arch>/include/asm/io.h and test. 1184aa53233aSSimon Glass 1185aa53233aSSimon Glass Example output from the 'iotrace stats' command is below. 1186aa53233aSSimon Glass Note that if the trace buffer is exhausted, the checksum will 1187aa53233aSSimon Glass still continue to operate. 1188aa53233aSSimon Glass 1189aa53233aSSimon Glass iotrace is enabled 1190aa53233aSSimon Glass Start: 10000000 (buffer start address) 1191aa53233aSSimon Glass Size: 00010000 (buffer size) 1192aa53233aSSimon Glass Offset: 00000120 (current buffer offset) 1193aa53233aSSimon Glass Output: 10000120 (start + offset) 1194aa53233aSSimon Glass Count: 00000018 (number of trace records) 1195aa53233aSSimon Glass CRC32: 9526fb66 (CRC32 of all trace records) 1196aa53233aSSimon Glass 1197c609719bSwdenk- Timestamp Support: 1198c609719bSwdenk 1199c609719bSwdenk When CONFIG_TIMESTAMP is selected, the timestamp 1200c609719bSwdenk (date and time) of an image is printed by image 1201c609719bSwdenk commands like bootm or iminfo. This option is 1202602ad3b3SJon Loeliger automatically enabled when you select CONFIG_CMD_DATE . 1203c609719bSwdenk 1204923c46f9SKarl O. Pinc- Partition Labels (disklabels) Supported: 1205923c46f9SKarl O. Pinc Zero or more of the following: 1206923c46f9SKarl O. Pinc CONFIG_MAC_PARTITION Apple's MacOS partition table. 1207923c46f9SKarl O. Pinc CONFIG_DOS_PARTITION MS Dos partition table, traditional on the 1208923c46f9SKarl O. Pinc Intel architecture, USB sticks, etc. 1209923c46f9SKarl O. Pinc CONFIG_ISO_PARTITION ISO partition table, used on CDROM etc. 1210923c46f9SKarl O. Pinc CONFIG_EFI_PARTITION GPT partition table, common when EFI is the 1211923c46f9SKarl O. Pinc bootloader. Note 2TB partition limit; see 1212923c46f9SKarl O. Pinc disk/part_efi.c 1213923c46f9SKarl O. Pinc CONFIG_MTD_PARTITIONS Memory Technology Device partition table. 1214c609719bSwdenk 1215602ad3b3SJon Loeliger If IDE or SCSI support is enabled (CONFIG_CMD_IDE or 1216218ca724SWolfgang Denk CONFIG_CMD_SCSI) you must configure support for at 1217923c46f9SKarl O. Pinc least one non-MTD partition type as well. 1218c609719bSwdenk 1219c609719bSwdenk- IDE Reset method: 12204d13cbadSwdenk CONFIG_IDE_RESET_ROUTINE - this is defined in several 12214d13cbadSwdenk board configurations files but used nowhere! 1222c609719bSwdenk 12234d13cbadSwdenk CONFIG_IDE_RESET - is this is defined, IDE Reset will 12244d13cbadSwdenk be performed by calling the function 12254d13cbadSwdenk ide_set_reset(int reset) 12264d13cbadSwdenk which has to be defined in a board specific file 1227c609719bSwdenk 1228c609719bSwdenk- ATAPI Support: 1229c609719bSwdenk CONFIG_ATAPI 1230c609719bSwdenk 1231c609719bSwdenk Set this to enable ATAPI support. 1232c609719bSwdenk 1233c40b2956Swdenk- LBA48 Support 1234c40b2956Swdenk CONFIG_LBA48 1235c40b2956Swdenk 1236c40b2956Swdenk Set this to enable support for disks larger than 137GB 12374b142febSHeiko Schocher Also look at CONFIG_SYS_64BIT_LBA. 1238c40b2956Swdenk Whithout these , LBA48 support uses 32bit variables and will 'only' 1239c40b2956Swdenk support disks up to 2.1TB. 1240c40b2956Swdenk 12416d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_64BIT_LBA: 1242c40b2956Swdenk When enabled, makes the IDE subsystem use 64bit sector addresses. 1243c40b2956Swdenk Default is 32bit. 1244c40b2956Swdenk 1245c609719bSwdenk- SCSI Support: 1246c609719bSwdenk At the moment only there is only support for the 1247c609719bSwdenk SYM53C8XX SCSI controller; define 1248c609719bSwdenk CONFIG_SCSI_SYM53C8XX to enable it. 1249c609719bSwdenk 12506d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SCSI_MAX_LUN [8], CONFIG_SYS_SCSI_MAX_SCSI_ID [7] and 12516d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SCSI_MAX_DEVICE [CONFIG_SYS_SCSI_MAX_SCSI_ID * 12526d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SCSI_MAX_LUN] can be adjusted to define the 1253c609719bSwdenk maximum numbers of LUNs, SCSI ID's and target 1254c609719bSwdenk devices. 12556d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz) 1256c609719bSwdenk 1257447c031bSStefan Reinauer The environment variable 'scsidevs' is set to the number of 1258447c031bSStefan Reinauer SCSI devices found during the last scan. 1259447c031bSStefan Reinauer 1260c609719bSwdenk- NETWORK Support (PCI): 1261682011ffSwdenk CONFIG_E1000 1262ce5207e1SKyle Moffett Support for Intel 8254x/8257x gigabit chips. 1263ce5207e1SKyle Moffett 1264ce5207e1SKyle Moffett CONFIG_E1000_SPI 1265ce5207e1SKyle Moffett Utility code for direct access to the SPI bus on Intel 8257x. 1266ce5207e1SKyle Moffett This does not do anything useful unless you set at least one 1267ce5207e1SKyle Moffett of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC. 1268ce5207e1SKyle Moffett 1269ce5207e1SKyle Moffett CONFIG_E1000_SPI_GENERIC 1270ce5207e1SKyle Moffett Allow generic access to the SPI bus on the Intel 8257x, for 1271ce5207e1SKyle Moffett example with the "sspi" command. 1272ce5207e1SKyle Moffett 1273ce5207e1SKyle Moffett CONFIG_CMD_E1000 1274ce5207e1SKyle Moffett Management command for E1000 devices. When used on devices 1275ce5207e1SKyle Moffett with SPI support you can reprogram the EEPROM from U-Boot. 1276682011ffSwdenk 1277ac3315c2SAndre Schwarz CONFIG_E1000_FALLBACK_MAC 127811ccc33fSMarcel Ziswiler default MAC for empty EEPROM after production. 1279ac3315c2SAndre Schwarz 1280c609719bSwdenk CONFIG_EEPRO100 1281c609719bSwdenk Support for Intel 82557/82559/82559ER chips. 128211ccc33fSMarcel Ziswiler Optional CONFIG_EEPRO100_SROM_WRITE enables EEPROM 1283c609719bSwdenk write routine for first time initialisation. 1284c609719bSwdenk 1285c609719bSwdenk CONFIG_TULIP 1286c609719bSwdenk Support for Digital 2114x chips. 1287c609719bSwdenk Optional CONFIG_TULIP_SELECT_MEDIA for board specific 1288c609719bSwdenk modem chip initialisation (KS8761/QS6611). 1289c609719bSwdenk 1290c609719bSwdenk CONFIG_NATSEMI 1291c609719bSwdenk Support for National dp83815 chips. 1292c609719bSwdenk 1293c609719bSwdenk CONFIG_NS8382X 1294c609719bSwdenk Support for National dp8382[01] gigabit chips. 1295c609719bSwdenk 129645219c46Swdenk- NETWORK Support (other): 129745219c46Swdenk 1298c041e9d2SJens Scharsig CONFIG_DRIVER_AT91EMAC 1299c041e9d2SJens Scharsig Support for AT91RM9200 EMAC. 1300c041e9d2SJens Scharsig 1301c041e9d2SJens Scharsig CONFIG_RMII 1302c041e9d2SJens Scharsig Define this to use reduced MII inteface 1303c041e9d2SJens Scharsig 1304c041e9d2SJens Scharsig CONFIG_DRIVER_AT91EMAC_QUIET 1305c041e9d2SJens Scharsig If this defined, the driver is quiet. 1306c041e9d2SJens Scharsig The driver doen't show link status messages. 1307c041e9d2SJens Scharsig 1308efdd7319SRob Herring CONFIG_CALXEDA_XGMAC 1309efdd7319SRob Herring Support for the Calxeda XGMAC device 1310efdd7319SRob Herring 13113bb46d23SAshok CONFIG_LAN91C96 131245219c46Swdenk Support for SMSC's LAN91C96 chips. 131345219c46Swdenk 131445219c46Swdenk CONFIG_LAN91C96_BASE 131545219c46Swdenk Define this to hold the physical address 131645219c46Swdenk of the LAN91C96's I/O space 131745219c46Swdenk 131845219c46Swdenk CONFIG_LAN91C96_USE_32_BIT 131945219c46Swdenk Define this to enable 32 bit addressing 132045219c46Swdenk 13213bb46d23SAshok CONFIG_SMC91111 1322f39748aeSwdenk Support for SMSC's LAN91C111 chip 1323f39748aeSwdenk 1324f39748aeSwdenk CONFIG_SMC91111_BASE 1325f39748aeSwdenk Define this to hold the physical address 1326f39748aeSwdenk of the device (I/O space) 1327f39748aeSwdenk 1328f39748aeSwdenk CONFIG_SMC_USE_32_BIT 1329f39748aeSwdenk Define this if data bus is 32 bits 1330f39748aeSwdenk 1331f39748aeSwdenk CONFIG_SMC_USE_IOFUNCS 1332f39748aeSwdenk Define this to use i/o functions instead of macros 1333f39748aeSwdenk (some hardware wont work with macros) 1334f39748aeSwdenk 1335dc02badaSHeiko Schocher CONFIG_DRIVER_TI_EMAC 1336dc02badaSHeiko Schocher Support for davinci emac 1337dc02badaSHeiko Schocher 1338dc02badaSHeiko Schocher CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT 1339dc02badaSHeiko Schocher Define this if you have more then 3 PHYs. 1340dc02badaSHeiko Schocher 1341b3dbf4a5SMacpaul Lin CONFIG_FTGMAC100 1342b3dbf4a5SMacpaul Lin Support for Faraday's FTGMAC100 Gigabit SoC Ethernet 1343b3dbf4a5SMacpaul Lin 1344b3dbf4a5SMacpaul Lin CONFIG_FTGMAC100_EGIGA 1345b3dbf4a5SMacpaul Lin Define this to use GE link update with gigabit PHY. 1346b3dbf4a5SMacpaul Lin Define this if FTGMAC100 is connected to gigabit PHY. 1347b3dbf4a5SMacpaul Lin If your system has 10/100 PHY only, it might not occur 1348b3dbf4a5SMacpaul Lin wrong behavior. Because PHY usually return timeout or 1349b3dbf4a5SMacpaul Lin useless data when polling gigabit status and gigabit 1350b3dbf4a5SMacpaul Lin control registers. This behavior won't affect the 1351b3dbf4a5SMacpaul Lin correctnessof 10/100 link speed update. 1352b3dbf4a5SMacpaul Lin 1353c2fff331SMike Rapoport CONFIG_SMC911X 1354557b377dSJens Gehrlein Support for SMSC's LAN911x and LAN921x chips 1355557b377dSJens Gehrlein 1356c2fff331SMike Rapoport CONFIG_SMC911X_BASE 1357557b377dSJens Gehrlein Define this to hold the physical address 1358557b377dSJens Gehrlein of the device (I/O space) 1359557b377dSJens Gehrlein 1360c2fff331SMike Rapoport CONFIG_SMC911X_32_BIT 1361557b377dSJens Gehrlein Define this if data bus is 32 bits 1362557b377dSJens Gehrlein 1363c2fff331SMike Rapoport CONFIG_SMC911X_16_BIT 1364557b377dSJens Gehrlein Define this if data bus is 16 bits. If your processor 1365557b377dSJens Gehrlein automatically converts one 32 bit word to two 16 bit 1366c2fff331SMike Rapoport words you may also try CONFIG_SMC911X_32_BIT. 1367557b377dSJens Gehrlein 13683d0075faSYoshihiro Shimoda CONFIG_SH_ETHER 13693d0075faSYoshihiro Shimoda Support for Renesas on-chip Ethernet controller 13703d0075faSYoshihiro Shimoda 13713d0075faSYoshihiro Shimoda CONFIG_SH_ETHER_USE_PORT 13723d0075faSYoshihiro Shimoda Define the number of ports to be used 13733d0075faSYoshihiro Shimoda 13743d0075faSYoshihiro Shimoda CONFIG_SH_ETHER_PHY_ADDR 13753d0075faSYoshihiro Shimoda Define the ETH PHY's address 13763d0075faSYoshihiro Shimoda 137768260aabSYoshihiro Shimoda CONFIG_SH_ETHER_CACHE_WRITEBACK 137868260aabSYoshihiro Shimoda If this option is set, the driver enables cache flush. 137968260aabSYoshihiro Shimoda 1380b2f97cf2SHeiko Schocher- PWM Support: 1381b2f97cf2SHeiko Schocher CONFIG_PWM_IMX 1382b2f97cf2SHeiko Schocher Support for PWM modul on the imx6. 1383b2f97cf2SHeiko Schocher 13845e124724SVadim Bendebury- TPM Support: 138590899cc0SChe-liang Chiou CONFIG_TPM 138690899cc0SChe-liang Chiou Support TPM devices. 138790899cc0SChe-liang Chiou 13881b393db5STom Wai-Hong Tam CONFIG_TPM_TIS_I2C 13891b393db5STom Wai-Hong Tam Support for i2c bus TPM devices. Only one device 13901b393db5STom Wai-Hong Tam per system is supported at this time. 13911b393db5STom Wai-Hong Tam 13921b393db5STom Wai-Hong Tam CONFIG_TPM_TIS_I2C_BUS_NUMBER 13931b393db5STom Wai-Hong Tam Define the the i2c bus number for the TPM device 13941b393db5STom Wai-Hong Tam 13951b393db5STom Wai-Hong Tam CONFIG_TPM_TIS_I2C_SLAVE_ADDRESS 13961b393db5STom Wai-Hong Tam Define the TPM's address on the i2c bus 13971b393db5STom Wai-Hong Tam 13981b393db5STom Wai-Hong Tam CONFIG_TPM_TIS_I2C_BURST_LIMITATION 13991b393db5STom Wai-Hong Tam Define the burst count bytes upper limit 14001b393db5STom Wai-Hong Tam 1401c01939c7SDirk Eibach CONFIG_TPM_ATMEL_TWI 1402c01939c7SDirk Eibach Support for Atmel TWI TPM device. Requires I2C support. 1403c01939c7SDirk Eibach 140490899cc0SChe-liang Chiou CONFIG_TPM_TIS_LPC 14055e124724SVadim Bendebury Support for generic parallel port TPM devices. Only one device 14065e124724SVadim Bendebury per system is supported at this time. 14075e124724SVadim Bendebury 14085e124724SVadim Bendebury CONFIG_TPM_TIS_BASE_ADDRESS 14095e124724SVadim Bendebury Base address where the generic TPM device is mapped 14105e124724SVadim Bendebury to. Contemporary x86 systems usually map it at 14115e124724SVadim Bendebury 0xfed40000. 14125e124724SVadim Bendebury 1413be6c1529SReinhard Pfau CONFIG_CMD_TPM 1414be6c1529SReinhard Pfau Add tpm monitor functions. 1415be6c1529SReinhard Pfau Requires CONFIG_TPM. If CONFIG_TPM_AUTH_SESSIONS is set, also 1416be6c1529SReinhard Pfau provides monitor access to authorized functions. 1417be6c1529SReinhard Pfau 1418be6c1529SReinhard Pfau CONFIG_TPM 1419be6c1529SReinhard Pfau Define this to enable the TPM support library which provides 1420be6c1529SReinhard Pfau functional interfaces to some TPM commands. 1421be6c1529SReinhard Pfau Requires support for a TPM device. 1422be6c1529SReinhard Pfau 1423be6c1529SReinhard Pfau CONFIG_TPM_AUTH_SESSIONS 1424be6c1529SReinhard Pfau Define this to enable authorized functions in the TPM library. 1425be6c1529SReinhard Pfau Requires CONFIG_TPM and CONFIG_SHA1. 1426be6c1529SReinhard Pfau 1427c609719bSwdenk- USB Support: 1428c609719bSwdenk At the moment only the UHCI host controller is 14294d13cbadSwdenk supported (PIP405, MIP405, MPC5200); define 1430c609719bSwdenk CONFIG_USB_UHCI to enable it. 1431c609719bSwdenk define CONFIG_USB_KEYBOARD to enable the USB Keyboard 143230d56faeSwdenk and define CONFIG_USB_STORAGE to enable the USB 1433c609719bSwdenk storage devices. 1434c609719bSwdenk Note: 1435c609719bSwdenk Supported are USB Keyboards and USB Floppy drives 1436c609719bSwdenk (TEAC FD-05PUB). 14374d13cbadSwdenk MPC5200 USB requires additional defines: 14384d13cbadSwdenk CONFIG_USB_CLOCK 14394d13cbadSwdenk for 528 MHz Clock: 0x0001bbbb 1440307ecb6dSEric Millbrandt CONFIG_PSC3_USB 1441307ecb6dSEric Millbrandt for USB on PSC3 14424d13cbadSwdenk CONFIG_USB_CONFIG 14434d13cbadSwdenk for differential drivers: 0x00001000 14444d13cbadSwdenk for single ended drivers: 0x00005000 1445307ecb6dSEric Millbrandt for differential drivers on PSC3: 0x00000100 1446307ecb6dSEric Millbrandt for single ended drivers on PSC3: 0x00004100 14476d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_USB_EVENT_POLL 1448fdcfaa1bSZhang Wei May be defined to allow interrupt polling 1449fdcfaa1bSZhang Wei instead of using asynchronous interrupts 14504d13cbadSwdenk 14519ab4ce22SSimon Glass CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the 14529ab4ce22SSimon Glass txfilltuning field in the EHCI controller on reset. 14539ab4ce22SSimon Glass 145416c8d5e7SWolfgang Denk- USB Device: 145516c8d5e7SWolfgang Denk Define the below if you wish to use the USB console. 145616c8d5e7SWolfgang Denk Once firmware is rebuilt from a serial console issue the 145716c8d5e7SWolfgang Denk command "setenv stdin usbtty; setenv stdout usbtty" and 145811ccc33fSMarcel Ziswiler attach your USB cable. The Unix command "dmesg" should print 145916c8d5e7SWolfgang Denk it has found a new device. The environment variable usbtty 146016c8d5e7SWolfgang Denk can be set to gserial or cdc_acm to enable your device to 146116c8d5e7SWolfgang Denk appear to a USB host as a Linux gserial device or a 146216c8d5e7SWolfgang Denk Common Device Class Abstract Control Model serial device. 146316c8d5e7SWolfgang Denk If you select usbtty = gserial you should be able to enumerate 146416c8d5e7SWolfgang Denk a Linux host by 146516c8d5e7SWolfgang Denk # modprobe usbserial vendor=0xVendorID product=0xProductID 146616c8d5e7SWolfgang Denk else if using cdc_acm, simply setting the environment 146716c8d5e7SWolfgang Denk variable usbtty to be cdc_acm should suffice. The following 146816c8d5e7SWolfgang Denk might be defined in YourBoardName.h 146916c8d5e7SWolfgang Denk 147016c8d5e7SWolfgang Denk CONFIG_USB_DEVICE 147116c8d5e7SWolfgang Denk Define this to build a UDC device 147216c8d5e7SWolfgang Denk 147316c8d5e7SWolfgang Denk CONFIG_USB_TTY 147416c8d5e7SWolfgang Denk Define this to have a tty type of device available to 147516c8d5e7SWolfgang Denk talk to the UDC device 147616c8d5e7SWolfgang Denk 1477f9da0f89SVipin KUMAR CONFIG_USBD_HS 1478f9da0f89SVipin KUMAR Define this to enable the high speed support for usb 1479f9da0f89SVipin KUMAR device and usbtty. If this feature is enabled, a routine 1480f9da0f89SVipin KUMAR int is_usbd_high_speed(void) 1481f9da0f89SVipin KUMAR also needs to be defined by the driver to dynamically poll 1482f9da0f89SVipin KUMAR whether the enumeration has succeded at high speed or full 1483f9da0f89SVipin KUMAR speed. 1484f9da0f89SVipin KUMAR 14856d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_CONSOLE_IS_IN_ENV 148616c8d5e7SWolfgang Denk Define this if you want stdin, stdout &/or stderr to 148716c8d5e7SWolfgang Denk be set to usbtty. 148816c8d5e7SWolfgang Denk 148916c8d5e7SWolfgang Denk mpc8xx: 14906d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_USB_EXTC_CLK 0xBLAH 149116c8d5e7SWolfgang Denk Derive USB clock from external clock "blah" 14926d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_USB_EXTC_CLK 0x02 149316c8d5e7SWolfgang Denk 14946d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_USB_BRG_CLK 0xBLAH 149516c8d5e7SWolfgang Denk Derive USB clock from brgclk 14966d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_USB_BRG_CLK 0x04 149716c8d5e7SWolfgang Denk 149816c8d5e7SWolfgang Denk If you have a USB-IF assigned VendorID then you may wish to 149916c8d5e7SWolfgang Denk define your own vendor specific values either in BoardName.h 150016c8d5e7SWolfgang Denk or directly in usbd_vendor_info.h. If you don't define 150116c8d5e7SWolfgang Denk CONFIG_USBD_MANUFACTURER, CONFIG_USBD_PRODUCT_NAME, 150216c8d5e7SWolfgang Denk CONFIG_USBD_VENDORID and CONFIG_USBD_PRODUCTID, then U-Boot 150316c8d5e7SWolfgang Denk should pretend to be a Linux device to it's target host. 150416c8d5e7SWolfgang Denk 150516c8d5e7SWolfgang Denk CONFIG_USBD_MANUFACTURER 150616c8d5e7SWolfgang Denk Define this string as the name of your company for 150716c8d5e7SWolfgang Denk - CONFIG_USBD_MANUFACTURER "my company" 150816c8d5e7SWolfgang Denk 150916c8d5e7SWolfgang Denk CONFIG_USBD_PRODUCT_NAME 151016c8d5e7SWolfgang Denk Define this string as the name of your product 151116c8d5e7SWolfgang Denk - CONFIG_USBD_PRODUCT_NAME "acme usb device" 151216c8d5e7SWolfgang Denk 151316c8d5e7SWolfgang Denk CONFIG_USBD_VENDORID 151416c8d5e7SWolfgang Denk Define this as your assigned Vendor ID from the USB 151516c8d5e7SWolfgang Denk Implementors Forum. This *must* be a genuine Vendor ID 151616c8d5e7SWolfgang Denk to avoid polluting the USB namespace. 151716c8d5e7SWolfgang Denk - CONFIG_USBD_VENDORID 0xFFFF 151816c8d5e7SWolfgang Denk 151916c8d5e7SWolfgang Denk CONFIG_USBD_PRODUCTID 152016c8d5e7SWolfgang Denk Define this as the unique Product ID 152116c8d5e7SWolfgang Denk for your device 152216c8d5e7SWolfgang Denk - CONFIG_USBD_PRODUCTID 0xFFFF 1523c609719bSwdenk 1524d70a560fSIgor Grinberg- ULPI Layer Support: 1525d70a560fSIgor Grinberg The ULPI (UTMI Low Pin (count) Interface) PHYs are supported via 1526d70a560fSIgor Grinberg the generic ULPI layer. The generic layer accesses the ULPI PHY 1527d70a560fSIgor Grinberg via the platform viewport, so you need both the genric layer and 1528d70a560fSIgor Grinberg the viewport enabled. Currently only Chipidea/ARC based 1529d70a560fSIgor Grinberg viewport is supported. 1530d70a560fSIgor Grinberg To enable the ULPI layer support, define CONFIG_USB_ULPI and 1531d70a560fSIgor Grinberg CONFIG_USB_ULPI_VIEWPORT in your board configuration file. 15326d365ea0SLucas Stach If your ULPI phy needs a different reference clock than the 15336d365ea0SLucas Stach standard 24 MHz then you have to define CONFIG_ULPI_REF_CLK to 15346d365ea0SLucas Stach the appropriate value in Hz. 1535c609719bSwdenk 1536c609719bSwdenk- MMC Support: 1537c609719bSwdenk The MMC controller on the Intel PXA is supported. To 1538c609719bSwdenk enable this define CONFIG_MMC. The MMC can be 1539c609719bSwdenk accessed from the boot prompt by mapping the device 1540c609719bSwdenk to physical memory similar to flash. Command line is 1541602ad3b3SJon Loeliger enabled with CONFIG_CMD_MMC. The MMC driver also works with 1542602ad3b3SJon Loeliger the FAT fs. This is enabled with CONFIG_CMD_FAT. 1543c609719bSwdenk 1544afb35666SYoshihiro Shimoda CONFIG_SH_MMCIF 1545afb35666SYoshihiro Shimoda Support for Renesas on-chip MMCIF controller 1546afb35666SYoshihiro Shimoda 1547afb35666SYoshihiro Shimoda CONFIG_SH_MMCIF_ADDR 1548afb35666SYoshihiro Shimoda Define the base address of MMCIF registers 1549afb35666SYoshihiro Shimoda 1550afb35666SYoshihiro Shimoda CONFIG_SH_MMCIF_CLK 1551afb35666SYoshihiro Shimoda Define the clock frequency for MMCIF 1552afb35666SYoshihiro Shimoda 15531fd93c6eSPierre Aubert CONFIG_GENERIC_MMC 15541fd93c6eSPierre Aubert Enable the generic MMC driver 15551fd93c6eSPierre Aubert 15561fd93c6eSPierre Aubert CONFIG_SUPPORT_EMMC_BOOT 15571fd93c6eSPierre Aubert Enable some additional features of the eMMC boot partitions. 15581fd93c6eSPierre Aubert 15591fd93c6eSPierre Aubert CONFIG_SUPPORT_EMMC_RPMB 15601fd93c6eSPierre Aubert Enable the commands for reading, writing and programming the 15611fd93c6eSPierre Aubert key for the Replay Protection Memory Block partition in eMMC. 15621fd93c6eSPierre Aubert 1563b3ba6e94STom Rini- USB Device Firmware Update (DFU) class support: 1564b3ba6e94STom Rini CONFIG_DFU_FUNCTION 1565b3ba6e94STom Rini This enables the USB portion of the DFU USB class 1566b3ba6e94STom Rini 1567b3ba6e94STom Rini CONFIG_CMD_DFU 1568b3ba6e94STom Rini This enables the command "dfu" which is used to have 1569b3ba6e94STom Rini U-Boot create a DFU class device via USB. This command 1570b3ba6e94STom Rini requires that the "dfu_alt_info" environment variable be 1571b3ba6e94STom Rini set and define the alt settings to expose to the host. 1572b3ba6e94STom Rini 1573b3ba6e94STom Rini CONFIG_DFU_MMC 1574b3ba6e94STom Rini This enables support for exposing (e)MMC devices via DFU. 1575b3ba6e94STom Rini 1576c6631764SPantelis Antoniou CONFIG_DFU_NAND 1577c6631764SPantelis Antoniou This enables support for exposing NAND devices via DFU. 1578c6631764SPantelis Antoniou 1579a9479f04SAfzal Mohammed CONFIG_DFU_RAM 1580a9479f04SAfzal Mohammed This enables support for exposing RAM via DFU. 1581a9479f04SAfzal Mohammed Note: DFU spec refer to non-volatile memory usage, but 1582a9479f04SAfzal Mohammed allow usages beyond the scope of spec - here RAM usage, 1583a9479f04SAfzal Mohammed one that would help mostly the developer. 1584a9479f04SAfzal Mohammed 1585e7e75c70SHeiko Schocher CONFIG_SYS_DFU_DATA_BUF_SIZE 1586e7e75c70SHeiko Schocher Dfu transfer uses a buffer before writing data to the 1587e7e75c70SHeiko Schocher raw storage device. Make the size (in bytes) of this buffer 1588e7e75c70SHeiko Schocher configurable. The size of this buffer is also configurable 1589e7e75c70SHeiko Schocher through the "dfu_bufsiz" environment variable. 1590e7e75c70SHeiko Schocher 1591ea2453d5SPantelis Antoniou CONFIG_SYS_DFU_MAX_FILE_SIZE 1592ea2453d5SPantelis Antoniou When updating files rather than the raw storage device, 1593ea2453d5SPantelis Antoniou we use a static buffer to copy the file into and then write 1594ea2453d5SPantelis Antoniou the buffer once we've been given the whole file. Define 1595ea2453d5SPantelis Antoniou this to the maximum filesize (in bytes) for the buffer. 1596ea2453d5SPantelis Antoniou Default is 4 MiB if undefined. 1597ea2453d5SPantelis Antoniou 1598001a8319SHeiko Schocher DFU_DEFAULT_POLL_TIMEOUT 1599001a8319SHeiko Schocher Poll timeout [ms], is the timeout a device can send to the 1600001a8319SHeiko Schocher host. The host must wait for this timeout before sending 1601001a8319SHeiko Schocher a subsequent DFU_GET_STATUS request to the device. 1602001a8319SHeiko Schocher 1603001a8319SHeiko Schocher DFU_MANIFEST_POLL_TIMEOUT 1604001a8319SHeiko Schocher Poll timeout [ms], which the device sends to the host when 1605001a8319SHeiko Schocher entering dfuMANIFEST state. Host waits this timeout, before 1606001a8319SHeiko Schocher sending again an USB request to the device. 1607001a8319SHeiko Schocher 16083aab70afSSebastian Siewior- USB Device Android Fastboot support: 16093aab70afSSebastian Siewior CONFIG_CMD_FASTBOOT 16103aab70afSSebastian Siewior This enables the command "fastboot" which enables the Android 16113aab70afSSebastian Siewior fastboot mode for the platform's USB device. Fastboot is a USB 16123aab70afSSebastian Siewior protocol for downloading images, flashing and device control 16133aab70afSSebastian Siewior used on Android devices. 16143aab70afSSebastian Siewior See doc/README.android-fastboot for more information. 16153aab70afSSebastian Siewior 16163aab70afSSebastian Siewior CONFIG_ANDROID_BOOT_IMAGE 16173aab70afSSebastian Siewior This enables support for booting images which use the Android 16183aab70afSSebastian Siewior image format header. 16193aab70afSSebastian Siewior 16203aab70afSSebastian Siewior CONFIG_USB_FASTBOOT_BUF_ADDR 16213aab70afSSebastian Siewior The fastboot protocol requires a large memory buffer for 16223aab70afSSebastian Siewior downloads. Define this to the starting RAM address to use for 16233aab70afSSebastian Siewior downloaded images. 16243aab70afSSebastian Siewior 16253aab70afSSebastian Siewior CONFIG_USB_FASTBOOT_BUF_SIZE 16263aab70afSSebastian Siewior The fastboot protocol requires a large memory buffer for 16273aab70afSSebastian Siewior downloads. This buffer should be as large as possible for a 16283aab70afSSebastian Siewior platform. Define this to the size available RAM for fastboot. 16293aab70afSSebastian Siewior 16306705d81eSwdenk- Journaling Flash filesystem support: 16316705d81eSwdenk CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE, 16326705d81eSwdenk CONFIG_JFFS2_NAND_DEV 16336705d81eSwdenk Define these for a default partition on a NAND device 16346705d81eSwdenk 16356d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_JFFS2_FIRST_SECTOR, 16366d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_JFFS2_FIRST_BANK, CONFIG_SYS_JFFS2_NUM_BANKS 16376705d81eSwdenk Define these for a default partition on a NOR device 16386705d81eSwdenk 16396d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_JFFS_CUSTOM_PART 16406705d81eSwdenk Define this to create an own partition. You have to provide a 16416705d81eSwdenk function struct part_info* jffs2_part_info(int part_num) 16426705d81eSwdenk 16436705d81eSwdenk If you define only one JFFS2 partition you may also want to 16446d0f6bcfSJean-Christophe PLAGNIOL-VILLARD #define CONFIG_SYS_JFFS_SINGLE_PART 1 16456705d81eSwdenk to disable the command chpart. This is the default when you 16466705d81eSwdenk have not defined a custom partition 16476705d81eSwdenk 1648c30a15e5SDonggeun Kim- FAT(File Allocation Table) filesystem write function support: 1649c30a15e5SDonggeun Kim CONFIG_FAT_WRITE 1650656f4c65SDonggeun Kim 1651656f4c65SDonggeun Kim Define this to enable support for saving memory data as a 1652656f4c65SDonggeun Kim file in FAT formatted partition. 1653656f4c65SDonggeun Kim 1654656f4c65SDonggeun Kim This will also enable the command "fatwrite" enabling the 1655656f4c65SDonggeun Kim user to write files to FAT. 1656c30a15e5SDonggeun Kim 165784cd9327SGabe BlackCBFS (Coreboot Filesystem) support 165884cd9327SGabe Black CONFIG_CMD_CBFS 165984cd9327SGabe Black 166084cd9327SGabe Black Define this to enable support for reading from a Coreboot 166184cd9327SGabe Black filesystem. Available commands are cbfsinit, cbfsinfo, cbfsls 166284cd9327SGabe Black and cbfsload. 166384cd9327SGabe Black 16644f0d1a2aSSiva Durga Prasad Paladugu- FAT(File Allocation Table) filesystem cluster size: 16654f0d1a2aSSiva Durga Prasad Paladugu CONFIG_FS_FAT_MAX_CLUSTSIZE 16664f0d1a2aSSiva Durga Prasad Paladugu 16674f0d1a2aSSiva Durga Prasad Paladugu Define the max cluster size for fat operations else 16684f0d1a2aSSiva Durga Prasad Paladugu a default value of 65536 will be defined. 16694f0d1a2aSSiva Durga Prasad Paladugu 1670c609719bSwdenk- Keyboard Support: 1671c609719bSwdenk CONFIG_ISA_KEYBOARD 1672c609719bSwdenk 1673c609719bSwdenk Define this to enable standard (PC-Style) keyboard 1674c609719bSwdenk support 1675c609719bSwdenk 1676c609719bSwdenk CONFIG_I8042_KBD 1677c609719bSwdenk Standard PC keyboard driver with US (is default) and 1678c609719bSwdenk GERMAN key layout (switch via environment 'keymap=de') support. 1679c609719bSwdenk Export function i8042_kbd_init, i8042_tstc and i8042_getc 1680c609719bSwdenk for cfb_console. Supports cursor blinking. 1681c609719bSwdenk 1682713cb680SHung-ying Tyan CONFIG_CROS_EC_KEYB 1683713cb680SHung-ying Tyan Enables a Chrome OS keyboard using the CROS_EC interface. 1684713cb680SHung-ying Tyan This uses CROS_EC to communicate with a second microcontroller 1685713cb680SHung-ying Tyan which provides key scans on request. 1686713cb680SHung-ying Tyan 1687c609719bSwdenk- Video support: 1688c609719bSwdenk CONFIG_VIDEO 1689c609719bSwdenk 1690c609719bSwdenk Define this to enable video support (for output to 1691c609719bSwdenk video). 1692c609719bSwdenk 1693c609719bSwdenk CONFIG_VIDEO_CT69000 1694c609719bSwdenk 1695c609719bSwdenk Enable Chips & Technologies 69000 Video chip 1696c609719bSwdenk 1697c609719bSwdenk CONFIG_VIDEO_SMI_LYNXEM 1698eeb1b77bSwdenk Enable Silicon Motion SMI 712/710/810 Video chip. The 1699eeb1b77bSwdenk video output is selected via environment 'videoout' 1700eeb1b77bSwdenk (1 = LCD and 2 = CRT). If videoout is undefined, CRT is 1701eeb1b77bSwdenk assumed. 1702c609719bSwdenk 1703eeb1b77bSwdenk For the CT69000 and SMI_LYNXEM drivers, videomode is 170411ccc33fSMarcel Ziswiler selected via environment 'videomode'. Two different ways 1705eeb1b77bSwdenk are possible: 1706eeb1b77bSwdenk - "videomode=num" 'num' is a standard LiLo mode numbers. 1707eeb1b77bSwdenk Following standard modes are supported (* is default): 1708eeb1b77bSwdenk 1709eeb1b77bSwdenk Colors 640x480 800x600 1024x768 1152x864 1280x1024 1710eeb1b77bSwdenk -------------+--------------------------------------------- 1711eeb1b77bSwdenk 8 bits | 0x301* 0x303 0x305 0x161 0x307 1712eeb1b77bSwdenk 15 bits | 0x310 0x313 0x316 0x162 0x319 1713eeb1b77bSwdenk 16 bits | 0x311 0x314 0x317 0x163 0x31A 1714eeb1b77bSwdenk 24 bits | 0x312 0x315 0x318 ? 0x31B 1715eeb1b77bSwdenk -------------+--------------------------------------------- 1716c609719bSwdenk (i.e. setenv videomode 317; saveenv; reset;) 1717c609719bSwdenk 1718eeb1b77bSwdenk - "videomode=bootargs" all the video parameters are parsed 17197817cb20SMarcel Ziswiler from the bootargs. (See drivers/video/videomodes.c) 1720eeb1b77bSwdenk 1721eeb1b77bSwdenk 1722a6c7ad2fSwdenk CONFIG_VIDEO_SED13806 1723a6c7ad2fSwdenk Enable Epson SED13806 driver. This driver supports 8bpp 1724a6c7ad2fSwdenk and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP 1725a6c7ad2fSwdenk or CONFIG_VIDEO_SED13806_16BPP 1726a6c7ad2fSwdenk 17277d3053fbSTimur Tabi CONFIG_FSL_DIU_FB 17287d3053fbSTimur Tabi Enable the Freescale DIU video driver. Reference boards for 17297d3053fbSTimur Tabi SOCs that have a DIU should define this macro to enable DIU 17307d3053fbSTimur Tabi support, and should also define these other macros: 17317d3053fbSTimur Tabi 17327d3053fbSTimur Tabi CONFIG_SYS_DIU_ADDR 17337d3053fbSTimur Tabi CONFIG_VIDEO 17347d3053fbSTimur Tabi CONFIG_CMD_BMP 17357d3053fbSTimur Tabi CONFIG_CFB_CONSOLE 17367d3053fbSTimur Tabi CONFIG_VIDEO_SW_CURSOR 17377d3053fbSTimur Tabi CONFIG_VGA_AS_SINGLE_DEVICE 17387d3053fbSTimur Tabi CONFIG_VIDEO_LOGO 17397d3053fbSTimur Tabi CONFIG_VIDEO_BMP_LOGO 17407d3053fbSTimur Tabi 1741ba8e76bdSTimur Tabi The DIU driver will look for the 'video-mode' environment 1742ba8e76bdSTimur Tabi variable, and if defined, enable the DIU as a console during 1743ba8e76bdSTimur Tabi boot. See the documentation file README.video for a 1744ba8e76bdSTimur Tabi description of this variable. 17457d3053fbSTimur Tabi 1746058d59b0SSimon Glass CONFIG_VIDEO_VGA 1747058d59b0SSimon Glass 1748058d59b0SSimon Glass Enable the VGA video / BIOS for x86. The alternative if you 1749058d59b0SSimon Glass are using coreboot is to use the coreboot frame buffer 1750058d59b0SSimon Glass driver. 1751058d59b0SSimon Glass 1752058d59b0SSimon Glass 1753682011ffSwdenk- Keyboard Support: 1754682011ffSwdenk CONFIG_KEYBOARD 1755682011ffSwdenk 1756682011ffSwdenk Define this to enable a custom keyboard support. 1757682011ffSwdenk This simply calls drv_keyboard_init() which must be 1758682011ffSwdenk defined in your board-specific files. 1759682011ffSwdenk The only board using this so far is RBC823. 1760a6c7ad2fSwdenk 1761c609719bSwdenk- LCD Support: CONFIG_LCD 1762c609719bSwdenk 1763c609719bSwdenk Define this to enable LCD support (for output to LCD 1764c609719bSwdenk display); also select one of the supported displays 1765c609719bSwdenk by defining one of these: 1766c609719bSwdenk 176739cf4804SStelian Pop CONFIG_ATMEL_LCD: 176839cf4804SStelian Pop 176939cf4804SStelian Pop HITACHI TX09D70VM1CCA, 3.5", 240x320. 177039cf4804SStelian Pop 1771fd3103bbSwdenk CONFIG_NEC_NL6448AC33: 1772c609719bSwdenk 1773fd3103bbSwdenk NEC NL6448AC33-18. Active, color, single scan. 1774c609719bSwdenk 1775fd3103bbSwdenk CONFIG_NEC_NL6448BC20 1776c609719bSwdenk 1777fd3103bbSwdenk NEC NL6448BC20-08. 6.5", 640x480. 1778fd3103bbSwdenk Active, color, single scan. 1779fd3103bbSwdenk 1780fd3103bbSwdenk CONFIG_NEC_NL6448BC33_54 1781fd3103bbSwdenk 1782fd3103bbSwdenk NEC NL6448BC33-54. 10.4", 640x480. 1783c609719bSwdenk Active, color, single scan. 1784c609719bSwdenk 1785c609719bSwdenk CONFIG_SHARP_16x9 1786c609719bSwdenk 1787c609719bSwdenk Sharp 320x240. Active, color, single scan. 1788c609719bSwdenk It isn't 16x9, and I am not sure what it is. 1789c609719bSwdenk 1790c609719bSwdenk CONFIG_SHARP_LQ64D341 1791c609719bSwdenk 1792c609719bSwdenk Sharp LQ64D341 display, 640x480. 1793c609719bSwdenk Active, color, single scan. 1794c609719bSwdenk 1795c609719bSwdenk CONFIG_HLD1045 1796c609719bSwdenk 1797c609719bSwdenk HLD1045 display, 640x480. 1798c609719bSwdenk Active, color, single scan. 1799c609719bSwdenk 1800c609719bSwdenk CONFIG_OPTREX_BW 1801c609719bSwdenk 1802c609719bSwdenk Optrex CBL50840-2 NF-FW 99 22 M5 1803c609719bSwdenk or 1804c609719bSwdenk Hitachi LMG6912RPFC-00T 1805c609719bSwdenk or 1806c609719bSwdenk Hitachi SP14Q002 1807c609719bSwdenk 1808c609719bSwdenk 320x240. Black & white. 1809c609719bSwdenk 1810c609719bSwdenk Normally display is black on white background; define 18116d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_WHITE_ON_BLACK to get it inverted. 1812c609719bSwdenk 1813676d319eSSimon Glass CONFIG_LCD_ALIGNMENT 1814676d319eSSimon Glass 1815676d319eSSimon Glass Normally the LCD is page-aligned (tyically 4KB). If this is 1816676d319eSSimon Glass defined then the LCD will be aligned to this value instead. 1817676d319eSSimon Glass For ARM it is sometimes useful to use MMU_SECTION_SIZE 1818676d319eSSimon Glass here, since it is cheaper to change data cache settings on 1819676d319eSSimon Glass a per-section basis. 1820676d319eSSimon Glass 18210d89efefSSimon Glass CONFIG_CONSOLE_SCROLL_LINES 18220d89efefSSimon Glass 18230d89efefSSimon Glass When the console need to be scrolled, this is the number of 18240d89efefSSimon Glass lines to scroll by. It defaults to 1. Increasing this makes 18250d89efefSSimon Glass the console jump but can help speed up operation when scrolling 18260d89efefSSimon Glass is slow. 1827676d319eSSimon Glass 182845d7f525STom Wai-Hong Tam CONFIG_LCD_BMP_RLE8 182945d7f525STom Wai-Hong Tam 183045d7f525STom Wai-Hong Tam Support drawing of RLE8-compressed bitmaps on the LCD. 183145d7f525STom Wai-Hong Tam 1832735987c5STom Wai-Hong Tam CONFIG_I2C_EDID 1833735987c5STom Wai-Hong Tam 1834735987c5STom Wai-Hong Tam Enables an 'i2c edid' command which can read EDID 1835735987c5STom Wai-Hong Tam information over I2C from an attached LCD display. 1836735987c5STom Wai-Hong Tam 18377152b1d0Swdenk- Splash Screen Support: CONFIG_SPLASH_SCREEN 1838d791b1dcSwdenk 1839d791b1dcSwdenk If this option is set, the environment is checked for 1840d791b1dcSwdenk a variable "splashimage". If found, the usual display 1841d791b1dcSwdenk of logo, copyright and system information on the LCD 1842e94d2cd9Swdenk is suppressed and the BMP image at the address 1843d791b1dcSwdenk specified in "splashimage" is loaded instead. The 1844d791b1dcSwdenk console is redirected to the "nulldev", too. This 1845d791b1dcSwdenk allows for a "silent" boot where a splash screen is 1846d791b1dcSwdenk loaded very quickly after power-on. 1847d791b1dcSwdenk 1848c0880485SNikita Kiryanov CONFIG_SPLASHIMAGE_GUARD 1849c0880485SNikita Kiryanov 1850c0880485SNikita Kiryanov If this option is set, then U-Boot will prevent the environment 1851c0880485SNikita Kiryanov variable "splashimage" from being set to a problematic address 18521551df35STom Rini (see README.displaying-bmps). 1853c0880485SNikita Kiryanov This option is useful for targets where, due to alignment 1854c0880485SNikita Kiryanov restrictions, an improperly aligned BMP image will cause a data 1855c0880485SNikita Kiryanov abort. If you think you will not have problems with unaligned 1856c0880485SNikita Kiryanov accesses (for example because your toolchain prevents them) 1857c0880485SNikita Kiryanov there is no need to set this option. 1858c0880485SNikita Kiryanov 18591ca298ceSMatthias Weisser CONFIG_SPLASH_SCREEN_ALIGN 18601ca298ceSMatthias Weisser 18611ca298ceSMatthias Weisser If this option is set the splash image can be freely positioned 18621ca298ceSMatthias Weisser on the screen. Environment variable "splashpos" specifies the 18631ca298ceSMatthias Weisser position as "x,y". If a positive number is given it is used as 18641ca298ceSMatthias Weisser number of pixel from left/top. If a negative number is given it 18651ca298ceSMatthias Weisser is used as number of pixel from right/bottom. You can also 18661ca298ceSMatthias Weisser specify 'm' for centering the image. 18671ca298ceSMatthias Weisser 18681ca298ceSMatthias Weisser Example: 18691ca298ceSMatthias Weisser setenv splashpos m,m 18701ca298ceSMatthias Weisser => image at center of screen 18711ca298ceSMatthias Weisser 18721ca298ceSMatthias Weisser setenv splashpos 30,20 18731ca298ceSMatthias Weisser => image at x = 30 and y = 20 18741ca298ceSMatthias Weisser 18751ca298ceSMatthias Weisser setenv splashpos -10,m 18761ca298ceSMatthias Weisser => vertically centered image 18771ca298ceSMatthias Weisser at x = dspWidth - bmpWidth - 9 18781ca298ceSMatthias Weisser 187998f4a3dfSStefan Roese- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP 188098f4a3dfSStefan Roese 188198f4a3dfSStefan Roese If this option is set, additionally to standard BMP 188298f4a3dfSStefan Roese images, gzipped BMP images can be displayed via the 188398f4a3dfSStefan Roese splashscreen support or the bmp command. 188498f4a3dfSStefan Roese 1885d5011762SAnatolij Gustschin- Run length encoded BMP image (RLE8) support: CONFIG_VIDEO_BMP_RLE8 1886d5011762SAnatolij Gustschin 1887d5011762SAnatolij Gustschin If this option is set, 8-bit RLE compressed BMP images 1888d5011762SAnatolij Gustschin can be displayed via the splashscreen support or the 1889d5011762SAnatolij Gustschin bmp command. 1890d5011762SAnatolij Gustschin 1891f2b96dfbSLei Wen- Do compresssing for memory range: 1892f2b96dfbSLei Wen CONFIG_CMD_ZIP 1893f2b96dfbSLei Wen 1894f2b96dfbSLei Wen If this option is set, it would use zlib deflate method 1895f2b96dfbSLei Wen to compress the specified memory at its best effort. 1896f2b96dfbSLei Wen 1897c29fdfc1Swdenk- Compression support: 18988ef70478SKees Cook CONFIG_GZIP 18998ef70478SKees Cook 19008ef70478SKees Cook Enabled by default to support gzip compressed images. 19018ef70478SKees Cook 1902c29fdfc1Swdenk CONFIG_BZIP2 1903c29fdfc1Swdenk 1904c29fdfc1Swdenk If this option is set, support for bzip2 compressed 1905c29fdfc1Swdenk images is included. If not, only uncompressed and gzip 1906c29fdfc1Swdenk compressed images are supported. 1907c29fdfc1Swdenk 1908c29fdfc1Swdenk NOTE: the bzip2 algorithm requires a lot of RAM, so 19096d0f6bcfSJean-Christophe PLAGNIOL-VILLARD the malloc area (as defined by CONFIG_SYS_MALLOC_LEN) should 1910c29fdfc1Swdenk be at least 4MB. 1911d791b1dcSwdenk 1912fc9c1727SLuigi 'Comio' Mantellini CONFIG_LZMA 1913fc9c1727SLuigi 'Comio' Mantellini 1914fc9c1727SLuigi 'Comio' Mantellini If this option is set, support for lzma compressed 1915fc9c1727SLuigi 'Comio' Mantellini images is included. 1916fc9c1727SLuigi 'Comio' Mantellini 1917fc9c1727SLuigi 'Comio' Mantellini Note: The LZMA algorithm adds between 2 and 4KB of code and it 1918fc9c1727SLuigi 'Comio' Mantellini requires an amount of dynamic memory that is given by the 1919fc9c1727SLuigi 'Comio' Mantellini formula: 1920fc9c1727SLuigi 'Comio' Mantellini 1921fc9c1727SLuigi 'Comio' Mantellini (1846 + 768 << (lc + lp)) * sizeof(uint16) 1922fc9c1727SLuigi 'Comio' Mantellini 1923fc9c1727SLuigi 'Comio' Mantellini Where lc and lp stand for, respectively, Literal context bits 1924fc9c1727SLuigi 'Comio' Mantellini and Literal pos bits. 1925fc9c1727SLuigi 'Comio' Mantellini 1926fc9c1727SLuigi 'Comio' Mantellini This value is upper-bounded by 14MB in the worst case. Anyway, 1927fc9c1727SLuigi 'Comio' Mantellini for a ~4MB large kernel image, we have lc=3 and lp=0 for a 1928fc9c1727SLuigi 'Comio' Mantellini total amount of (1846 + 768 << (3 + 0)) * 2 = ~41KB... that is 1929fc9c1727SLuigi 'Comio' Mantellini a very small buffer. 1930fc9c1727SLuigi 'Comio' Mantellini 1931fc9c1727SLuigi 'Comio' Mantellini Use the lzmainfo tool to determinate the lc and lp values and 1932fc9c1727SLuigi 'Comio' Mantellini then calculate the amount of needed dynamic memory (ensuring 19336d0f6bcfSJean-Christophe PLAGNIOL-VILLARD the appropriate CONFIG_SYS_MALLOC_LEN value). 1934fc9c1727SLuigi 'Comio' Mantellini 19358ef70478SKees Cook CONFIG_LZO 19368ef70478SKees Cook 19378ef70478SKees Cook If this option is set, support for LZO compressed images 19388ef70478SKees Cook is included. 19398ef70478SKees Cook 194017ea1177Swdenk- MII/PHY support: 194117ea1177Swdenk CONFIG_PHY_ADDR 194217ea1177Swdenk 194317ea1177Swdenk The address of PHY on MII bus. 194417ea1177Swdenk 194517ea1177Swdenk CONFIG_PHY_CLOCK_FREQ (ppc4xx) 194617ea1177Swdenk 194717ea1177Swdenk The clock frequency of the MII bus 194817ea1177Swdenk 194917ea1177Swdenk CONFIG_PHY_GIGE 195017ea1177Swdenk 195117ea1177Swdenk If this option is set, support for speed/duplex 195211ccc33fSMarcel Ziswiler detection of gigabit PHY is included. 195317ea1177Swdenk 195417ea1177Swdenk CONFIG_PHY_RESET_DELAY 195517ea1177Swdenk 195617ea1177Swdenk Some PHY like Intel LXT971A need extra delay after 195717ea1177Swdenk reset before any MII register access is possible. 195817ea1177Swdenk For such PHY, set this option to the usec delay 195917ea1177Swdenk required. (minimum 300usec for LXT971A) 196017ea1177Swdenk 196117ea1177Swdenk CONFIG_PHY_CMD_DELAY (ppc4xx) 196217ea1177Swdenk 196317ea1177Swdenk Some PHY like Intel LXT971A need extra delay after 196417ea1177Swdenk command issued before MII status register can be read 196517ea1177Swdenk 1966c609719bSwdenk- Ethernet address: 1967c609719bSwdenk CONFIG_ETHADDR 1968c68a05feSrichardretanubun CONFIG_ETH1ADDR 1969c609719bSwdenk CONFIG_ETH2ADDR 1970c609719bSwdenk CONFIG_ETH3ADDR 1971c68a05feSrichardretanubun CONFIG_ETH4ADDR 1972c68a05feSrichardretanubun CONFIG_ETH5ADDR 1973c609719bSwdenk 197411ccc33fSMarcel Ziswiler Define a default value for Ethernet address to use 197511ccc33fSMarcel Ziswiler for the respective Ethernet interface, in case this 1976c609719bSwdenk is not determined automatically. 1977c609719bSwdenk 1978c609719bSwdenk- IP address: 1979c609719bSwdenk CONFIG_IPADDR 1980c609719bSwdenk 1981c609719bSwdenk Define a default value for the IP address to use for 198211ccc33fSMarcel Ziswiler the default Ethernet interface, in case this is not 1983c609719bSwdenk determined through e.g. bootp. 19841ebcd654SWolfgang Denk (Environment variable "ipaddr") 1985c609719bSwdenk 1986c609719bSwdenk- Server IP address: 1987c609719bSwdenk CONFIG_SERVERIP 1988c609719bSwdenk 1989c609719bSwdenk Defines a default value for the IP address of a TFTP 1990c609719bSwdenk server to contact when using the "tftboot" command. 19911ebcd654SWolfgang Denk (Environment variable "serverip") 1992c609719bSwdenk 199397cfe861SRobin Getz CONFIG_KEEP_SERVERADDR 199497cfe861SRobin Getz 199597cfe861SRobin Getz Keeps the server's MAC address, in the env 'serveraddr' 199697cfe861SRobin Getz for passing to bootargs (like Linux's netconsole option) 199797cfe861SRobin Getz 19981ebcd654SWolfgang Denk- Gateway IP address: 19991ebcd654SWolfgang Denk CONFIG_GATEWAYIP 20001ebcd654SWolfgang Denk 20011ebcd654SWolfgang Denk Defines a default value for the IP address of the 20021ebcd654SWolfgang Denk default router where packets to other networks are 20031ebcd654SWolfgang Denk sent to. 20041ebcd654SWolfgang Denk (Environment variable "gatewayip") 20051ebcd654SWolfgang Denk 20061ebcd654SWolfgang Denk- Subnet mask: 20071ebcd654SWolfgang Denk CONFIG_NETMASK 20081ebcd654SWolfgang Denk 20091ebcd654SWolfgang Denk Defines a default value for the subnet mask (or 20101ebcd654SWolfgang Denk routing prefix) which is used to determine if an IP 20111ebcd654SWolfgang Denk address belongs to the local subnet or needs to be 20121ebcd654SWolfgang Denk forwarded through a router. 20131ebcd654SWolfgang Denk (Environment variable "netmask") 20141ebcd654SWolfgang Denk 201553a5c424SDavid Updegraff- Multicast TFTP Mode: 201653a5c424SDavid Updegraff CONFIG_MCAST_TFTP 201753a5c424SDavid Updegraff 201853a5c424SDavid Updegraff Defines whether you want to support multicast TFTP as per 201953a5c424SDavid Updegraff rfc-2090; for example to work with atftp. Lets lots of targets 202011ccc33fSMarcel Ziswiler tftp down the same boot image concurrently. Note: the Ethernet 202153a5c424SDavid Updegraff driver in use must provide a function: mcast() to join/leave a 202253a5c424SDavid Updegraff multicast group. 202353a5c424SDavid Updegraff 2024c609719bSwdenk- BOOTP Recovery Mode: 2025c609719bSwdenk CONFIG_BOOTP_RANDOM_DELAY 2026c609719bSwdenk 2027c609719bSwdenk If you have many targets in a network that try to 2028c609719bSwdenk boot using BOOTP, you may want to avoid that all 2029c609719bSwdenk systems send out BOOTP requests at precisely the same 2030c609719bSwdenk moment (which would happen for instance at recovery 2031c609719bSwdenk from a power failure, when all systems will try to 2032c609719bSwdenk boot, thus flooding the BOOTP server. Defining 2033c609719bSwdenk CONFIG_BOOTP_RANDOM_DELAY causes a random delay to be 2034c609719bSwdenk inserted before sending out BOOTP requests. The 20356c33c785SWolfgang Denk following delays are inserted then: 2036c609719bSwdenk 2037c609719bSwdenk 1st BOOTP request: delay 0 ... 1 sec 2038c609719bSwdenk 2nd BOOTP request: delay 0 ... 2 sec 2039c609719bSwdenk 3rd BOOTP request: delay 0 ... 4 sec 2040c609719bSwdenk 4th and following 2041c609719bSwdenk BOOTP requests: delay 0 ... 8 sec 2042c609719bSwdenk 2043fe389a82Sstroese- DHCP Advanced Options: 20441fe80d79SJon Loeliger You can fine tune the DHCP functionality by defining 20451fe80d79SJon Loeliger CONFIG_BOOTP_* symbols: 2046fe389a82Sstroese 20471fe80d79SJon Loeliger CONFIG_BOOTP_SUBNETMASK 20481fe80d79SJon Loeliger CONFIG_BOOTP_GATEWAY 20491fe80d79SJon Loeliger CONFIG_BOOTP_HOSTNAME 20501fe80d79SJon Loeliger CONFIG_BOOTP_NISDOMAIN 20511fe80d79SJon Loeliger CONFIG_BOOTP_BOOTPATH 20521fe80d79SJon Loeliger CONFIG_BOOTP_BOOTFILESIZE 20531fe80d79SJon Loeliger CONFIG_BOOTP_DNS 20541fe80d79SJon Loeliger CONFIG_BOOTP_DNS2 20551fe80d79SJon Loeliger CONFIG_BOOTP_SEND_HOSTNAME 20561fe80d79SJon Loeliger CONFIG_BOOTP_NTPSERVER 20571fe80d79SJon Loeliger CONFIG_BOOTP_TIMEOFFSET 20581fe80d79SJon Loeliger CONFIG_BOOTP_VENDOREX 20592c00e099SJoe Hershberger CONFIG_BOOTP_MAY_FAIL 2060fe389a82Sstroese 20615d110f0aSWilson Callan CONFIG_BOOTP_SERVERIP - TFTP server will be the serverip 20625d110f0aSWilson Callan environment variable, not the BOOTP server. 2063fe389a82Sstroese 20642c00e099SJoe Hershberger CONFIG_BOOTP_MAY_FAIL - If the DHCP server is not found 20652c00e099SJoe Hershberger after the configured retry count, the call will fail 20662c00e099SJoe Hershberger instead of starting over. This can be used to fail over 20672c00e099SJoe Hershberger to Link-local IP address configuration if the DHCP server 20682c00e099SJoe Hershberger is not available. 20692c00e099SJoe Hershberger 2070fe389a82Sstroese CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS 2071fe389a82Sstroese serverip from a DHCP server, it is possible that more 2072fe389a82Sstroese than one DNS serverip is offered to the client. 2073fe389a82Sstroese If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS 2074fe389a82Sstroese serverip will be stored in the additional environment 2075fe389a82Sstroese variable "dnsip2". The first DNS serverip is always 2076fe389a82Sstroese stored in the variable "dnsip", when CONFIG_BOOTP_DNS 20771fe80d79SJon Loeliger is defined. 2078fe389a82Sstroese 2079fe389a82Sstroese CONFIG_BOOTP_SEND_HOSTNAME - Some DHCP servers are capable 2080fe389a82Sstroese to do a dynamic update of a DNS server. To do this, they 2081fe389a82Sstroese need the hostname of the DHCP requester. 20825d110f0aSWilson Callan If CONFIG_BOOTP_SEND_HOSTNAME is defined, the content 20831fe80d79SJon Loeliger of the "hostname" environment variable is passed as 20841fe80d79SJon Loeliger option 12 to the DHCP server. 2085fe389a82Sstroese 2086d9a2f416SAras Vaichas CONFIG_BOOTP_DHCP_REQUEST_DELAY 2087d9a2f416SAras Vaichas 2088d9a2f416SAras Vaichas A 32bit value in microseconds for a delay between 2089d9a2f416SAras Vaichas receiving a "DHCP Offer" and sending the "DHCP Request". 2090d9a2f416SAras Vaichas This fixes a problem with certain DHCP servers that don't 2091d9a2f416SAras Vaichas respond 100% of the time to a "DHCP request". E.g. On an 2092d9a2f416SAras Vaichas AT91RM9200 processor running at 180MHz, this delay needed 2093d9a2f416SAras Vaichas to be *at least* 15,000 usec before a Windows Server 2003 2094d9a2f416SAras Vaichas DHCP server would reply 100% of the time. I recommend at 2095d9a2f416SAras Vaichas least 50,000 usec to be safe. The alternative is to hope 2096d9a2f416SAras Vaichas that one of the retries will be successful but note that 2097d9a2f416SAras Vaichas the DHCP timeout and retry process takes a longer than 2098d9a2f416SAras Vaichas this delay. 2099d9a2f416SAras Vaichas 2100d22c338eSJoe Hershberger - Link-local IP address negotiation: 2101d22c338eSJoe Hershberger Negotiate with other link-local clients on the local network 2102d22c338eSJoe Hershberger for an address that doesn't require explicit configuration. 2103d22c338eSJoe Hershberger This is especially useful if a DHCP server cannot be guaranteed 2104d22c338eSJoe Hershberger to exist in all environments that the device must operate. 2105d22c338eSJoe Hershberger 2106d22c338eSJoe Hershberger See doc/README.link-local for more information. 2107d22c338eSJoe Hershberger 2108a3d991bdSwdenk - CDP Options: 2109a3d991bdSwdenk CONFIG_CDP_DEVICE_ID 2110a3d991bdSwdenk 2111a3d991bdSwdenk The device id used in CDP trigger frames. 2112a3d991bdSwdenk 2113a3d991bdSwdenk CONFIG_CDP_DEVICE_ID_PREFIX 2114a3d991bdSwdenk 2115a3d991bdSwdenk A two character string which is prefixed to the MAC address 2116a3d991bdSwdenk of the device. 2117a3d991bdSwdenk 2118a3d991bdSwdenk CONFIG_CDP_PORT_ID 2119a3d991bdSwdenk 2120a3d991bdSwdenk A printf format string which contains the ascii name of 2121a3d991bdSwdenk the port. Normally is set to "eth%d" which sets 212211ccc33fSMarcel Ziswiler eth0 for the first Ethernet, eth1 for the second etc. 2123a3d991bdSwdenk 2124a3d991bdSwdenk CONFIG_CDP_CAPABILITIES 2125a3d991bdSwdenk 2126a3d991bdSwdenk A 32bit integer which indicates the device capabilities; 2127a3d991bdSwdenk 0x00000010 for a normal host which does not forwards. 2128a3d991bdSwdenk 2129a3d991bdSwdenk CONFIG_CDP_VERSION 2130a3d991bdSwdenk 2131a3d991bdSwdenk An ascii string containing the version of the software. 2132a3d991bdSwdenk 2133a3d991bdSwdenk CONFIG_CDP_PLATFORM 2134a3d991bdSwdenk 2135a3d991bdSwdenk An ascii string containing the name of the platform. 2136a3d991bdSwdenk 2137a3d991bdSwdenk CONFIG_CDP_TRIGGER 2138a3d991bdSwdenk 2139a3d991bdSwdenk A 32bit integer sent on the trigger. 2140a3d991bdSwdenk 2141a3d991bdSwdenk CONFIG_CDP_POWER_CONSUMPTION 2142a3d991bdSwdenk 2143a3d991bdSwdenk A 16bit integer containing the power consumption of the 2144a3d991bdSwdenk device in .1 of milliwatts. 2145a3d991bdSwdenk 2146a3d991bdSwdenk CONFIG_CDP_APPLIANCE_VLAN_TYPE 2147a3d991bdSwdenk 2148a3d991bdSwdenk A byte containing the id of the VLAN. 2149a3d991bdSwdenk 2150c609719bSwdenk- Status LED: CONFIG_STATUS_LED 2151c609719bSwdenk 2152c609719bSwdenk Several configurations allow to display the current 2153c609719bSwdenk status using a LED. For instance, the LED will blink 2154c609719bSwdenk fast while running U-Boot code, stop blinking as 2155c609719bSwdenk soon as a reply to a BOOTP request was received, and 2156c609719bSwdenk start blinking slow once the Linux kernel is running 2157c609719bSwdenk (supported by a status LED driver in the Linux 2158c609719bSwdenk kernel). Defining CONFIG_STATUS_LED enables this 2159c609719bSwdenk feature in U-Boot. 2160c609719bSwdenk 21611df7bbbaSIgor Grinberg Additional options: 21621df7bbbaSIgor Grinberg 21631df7bbbaSIgor Grinberg CONFIG_GPIO_LED 21641df7bbbaSIgor Grinberg The status LED can be connected to a GPIO pin. 21651df7bbbaSIgor Grinberg In such cases, the gpio_led driver can be used as a 21661df7bbbaSIgor Grinberg status LED backend implementation. Define CONFIG_GPIO_LED 21671df7bbbaSIgor Grinberg to include the gpio_led driver in the U-Boot binary. 21681df7bbbaSIgor Grinberg 21699dfdcdfeSIgor Grinberg CONFIG_GPIO_LED_INVERTED_TABLE 21709dfdcdfeSIgor Grinberg Some GPIO connected LEDs may have inverted polarity in which 21719dfdcdfeSIgor Grinberg case the GPIO high value corresponds to LED off state and 21729dfdcdfeSIgor Grinberg GPIO low value corresponds to LED on state. 21739dfdcdfeSIgor Grinberg In such cases CONFIG_GPIO_LED_INVERTED_TABLE may be defined 21749dfdcdfeSIgor Grinberg with a list of GPIO LEDs that have inverted polarity. 21759dfdcdfeSIgor Grinberg 2176c609719bSwdenk- CAN Support: CONFIG_CAN_DRIVER 2177c609719bSwdenk 2178c609719bSwdenk Defining CONFIG_CAN_DRIVER enables CAN driver support 2179c609719bSwdenk on those systems that support this (optional) 2180c609719bSwdenk feature, like the TQM8xxL modules. 2181c609719bSwdenk 21823f4978c7SHeiko Schocher- I2C Support: CONFIG_SYS_I2C 2183c609719bSwdenk 21843f4978c7SHeiko Schocher This enable the NEW i2c subsystem, and will allow you to use 21853f4978c7SHeiko Schocher i2c commands at the u-boot command line (as long as you set 21863f4978c7SHeiko Schocher CONFIG_CMD_I2C in CONFIG_COMMANDS) and communicate with i2c 21873f4978c7SHeiko Schocher based realtime clock chips or other i2c devices. See 21883f4978c7SHeiko Schocher common/cmd_i2c.c for a description of the command line 21893f4978c7SHeiko Schocher interface. 21903f4978c7SHeiko Schocher 21913f4978c7SHeiko Schocher ported i2c driver to the new framework: 2192ea818dbbSHeiko Schocher - drivers/i2c/soft_i2c.c: 2193ea818dbbSHeiko Schocher - activate first bus with CONFIG_SYS_I2C_SOFT define 2194ea818dbbSHeiko Schocher CONFIG_SYS_I2C_SOFT_SPEED and CONFIG_SYS_I2C_SOFT_SLAVE 2195ea818dbbSHeiko Schocher for defining speed and slave address 2196ea818dbbSHeiko Schocher - activate second bus with I2C_SOFT_DECLARATIONS2 define 2197ea818dbbSHeiko Schocher CONFIG_SYS_I2C_SOFT_SPEED_2 and CONFIG_SYS_I2C_SOFT_SLAVE_2 2198ea818dbbSHeiko Schocher for defining speed and slave address 2199ea818dbbSHeiko Schocher - activate third bus with I2C_SOFT_DECLARATIONS3 define 2200ea818dbbSHeiko Schocher CONFIG_SYS_I2C_SOFT_SPEED_3 and CONFIG_SYS_I2C_SOFT_SLAVE_3 2201ea818dbbSHeiko Schocher for defining speed and slave address 2202ea818dbbSHeiko Schocher - activate fourth bus with I2C_SOFT_DECLARATIONS4 define 2203ea818dbbSHeiko Schocher CONFIG_SYS_I2C_SOFT_SPEED_4 and CONFIG_SYS_I2C_SOFT_SLAVE_4 2204ea818dbbSHeiko Schocher for defining speed and slave address 22053f4978c7SHeiko Schocher 220600f792e0SHeiko Schocher - drivers/i2c/fsl_i2c.c: 220700f792e0SHeiko Schocher - activate i2c driver with CONFIG_SYS_I2C_FSL 220800f792e0SHeiko Schocher define CONFIG_SYS_FSL_I2C_OFFSET for setting the register 220900f792e0SHeiko Schocher offset CONFIG_SYS_FSL_I2C_SPEED for the i2c speed and 221000f792e0SHeiko Schocher CONFIG_SYS_FSL_I2C_SLAVE for the slave addr of the first 221100f792e0SHeiko Schocher bus. 221200f792e0SHeiko Schocher - If your board supports a second fsl i2c bus, define 221300f792e0SHeiko Schocher CONFIG_SYS_FSL_I2C2_OFFSET for the register offset 221400f792e0SHeiko Schocher CONFIG_SYS_FSL_I2C2_SPEED for the speed and 221500f792e0SHeiko Schocher CONFIG_SYS_FSL_I2C2_SLAVE for the slave address of the 221600f792e0SHeiko Schocher second bus. 221700f792e0SHeiko Schocher 22181f2ba722SSimon Glass - drivers/i2c/tegra_i2c.c: 22191f2ba722SSimon Glass - activate this driver with CONFIG_SYS_I2C_TEGRA 22201f2ba722SSimon Glass - This driver adds 4 i2c buses with a fix speed from 22211f2ba722SSimon Glass 100000 and the slave addr 0! 22221f2ba722SSimon Glass 2223880540deSDirk Eibach - drivers/i2c/ppc4xx_i2c.c 2224880540deSDirk Eibach - activate this driver with CONFIG_SYS_I2C_PPC4XX 2225880540deSDirk Eibach - CONFIG_SYS_I2C_PPC4XX_CH0 activate hardware channel 0 2226880540deSDirk Eibach - CONFIG_SYS_I2C_PPC4XX_CH1 activate hardware channel 1 2227880540deSDirk Eibach 2228fac96408Strem - drivers/i2c/i2c_mxc.c 2229fac96408Strem - activate this driver with CONFIG_SYS_I2C_MXC 2230fac96408Strem - define speed for bus 1 with CONFIG_SYS_MXC_I2C1_SPEED 2231fac96408Strem - define slave for bus 1 with CONFIG_SYS_MXC_I2C1_SLAVE 2232fac96408Strem - define speed for bus 2 with CONFIG_SYS_MXC_I2C2_SPEED 2233fac96408Strem - define slave for bus 2 with CONFIG_SYS_MXC_I2C2_SLAVE 2234fac96408Strem - define speed for bus 3 with CONFIG_SYS_MXC_I2C3_SPEED 2235fac96408Strem - define slave for bus 3 with CONFIG_SYS_MXC_I2C3_SLAVE 2236fac96408Strem If thoses defines are not set, default value is 100000 2237fac96408Strem for speed, and 0 for slave. 2238fac96408Strem 22391086bfa9SNobuhiro Iwamatsu - drivers/i2c/rcar_i2c.c: 22401086bfa9SNobuhiro Iwamatsu - activate this driver with CONFIG_SYS_I2C_RCAR 22411086bfa9SNobuhiro Iwamatsu - This driver adds 4 i2c buses 22421086bfa9SNobuhiro Iwamatsu 22431086bfa9SNobuhiro Iwamatsu - CONFIG_SYS_RCAR_I2C0_BASE for setting the register channel 0 22441086bfa9SNobuhiro Iwamatsu - CONFIG_SYS_RCAR_I2C0_SPEED for for the speed channel 0 22451086bfa9SNobuhiro Iwamatsu - CONFIG_SYS_RCAR_I2C1_BASE for setting the register channel 1 22461086bfa9SNobuhiro Iwamatsu - CONFIG_SYS_RCAR_I2C1_SPEED for for the speed channel 1 22471086bfa9SNobuhiro Iwamatsu - CONFIG_SYS_RCAR_I2C2_BASE for setting the register channel 2 22481086bfa9SNobuhiro Iwamatsu - CONFIG_SYS_RCAR_I2C2_SPEED for for the speed channel 2 22491086bfa9SNobuhiro Iwamatsu - CONFIG_SYS_RCAR_I2C3_BASE for setting the register channel 3 22501086bfa9SNobuhiro Iwamatsu - CONFIG_SYS_RCAR_I2C3_SPEED for for the speed channel 3 22511086bfa9SNobuhiro Iwamatsu - CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS for number of i2c buses 22521086bfa9SNobuhiro Iwamatsu 22532035d77dSNobuhiro Iwamatsu - drivers/i2c/sh_i2c.c: 22542035d77dSNobuhiro Iwamatsu - activate this driver with CONFIG_SYS_I2C_SH 22552035d77dSNobuhiro Iwamatsu - This driver adds from 2 to 5 i2c buses 22562035d77dSNobuhiro Iwamatsu 22572035d77dSNobuhiro Iwamatsu - CONFIG_SYS_I2C_SH_BASE0 for setting the register channel 0 22582035d77dSNobuhiro Iwamatsu - CONFIG_SYS_I2C_SH_SPEED0 for for the speed channel 0 22592035d77dSNobuhiro Iwamatsu - CONFIG_SYS_I2C_SH_BASE1 for setting the register channel 1 22602035d77dSNobuhiro Iwamatsu - CONFIG_SYS_I2C_SH_SPEED1 for for the speed channel 1 22612035d77dSNobuhiro Iwamatsu - CONFIG_SYS_I2C_SH_BASE2 for setting the register channel 2 22622035d77dSNobuhiro Iwamatsu - CONFIG_SYS_I2C_SH_SPEED2 for for the speed channel 2 22632035d77dSNobuhiro Iwamatsu - CONFIG_SYS_I2C_SH_BASE3 for setting the register channel 3 22642035d77dSNobuhiro Iwamatsu - CONFIG_SYS_I2C_SH_SPEED3 for for the speed channel 3 22652035d77dSNobuhiro Iwamatsu - CONFIG_SYS_I2C_SH_BASE4 for setting the register channel 4 22662035d77dSNobuhiro Iwamatsu - CONFIG_SYS_I2C_SH_SPEED4 for for the speed channel 4 22672035d77dSNobuhiro Iwamatsu - CONFIG_SYS_I2C_SH_BASE5 for setting the register channel 5 22682035d77dSNobuhiro Iwamatsu - CONFIG_SYS_I2C_SH_SPEED5 for for the speed channel 5 22692035d77dSNobuhiro Iwamatsu - CONFIF_SYS_I2C_SH_NUM_CONTROLLERS for nummber of i2c buses 22702035d77dSNobuhiro Iwamatsu 22716789e84eSHeiko Schocher - drivers/i2c/omap24xx_i2c.c 22726789e84eSHeiko Schocher - activate this driver with CONFIG_SYS_I2C_OMAP24XX 22736789e84eSHeiko Schocher - CONFIG_SYS_OMAP24_I2C_SPEED speed channel 0 22746789e84eSHeiko Schocher - CONFIG_SYS_OMAP24_I2C_SLAVE slave addr channel 0 22756789e84eSHeiko Schocher - CONFIG_SYS_OMAP24_I2C_SPEED1 speed channel 1 22766789e84eSHeiko Schocher - CONFIG_SYS_OMAP24_I2C_SLAVE1 slave addr channel 1 22776789e84eSHeiko Schocher - CONFIG_SYS_OMAP24_I2C_SPEED2 speed channel 2 22786789e84eSHeiko Schocher - CONFIG_SYS_OMAP24_I2C_SLAVE2 slave addr channel 2 22796789e84eSHeiko Schocher - CONFIG_SYS_OMAP24_I2C_SPEED3 speed channel 3 22806789e84eSHeiko Schocher - CONFIG_SYS_OMAP24_I2C_SLAVE3 slave addr channel 3 22816789e84eSHeiko Schocher - CONFIG_SYS_OMAP24_I2C_SPEED4 speed channel 4 22826789e84eSHeiko Schocher - CONFIG_SYS_OMAP24_I2C_SLAVE4 slave addr channel 4 22836789e84eSHeiko Schocher 22840bdffe71SHeiko Schocher - drivers/i2c/zynq_i2c.c 22850bdffe71SHeiko Schocher - activate this driver with CONFIG_SYS_I2C_ZYNQ 22860bdffe71SHeiko Schocher - set CONFIG_SYS_I2C_ZYNQ_SPEED for speed setting 22870bdffe71SHeiko Schocher - set CONFIG_SYS_I2C_ZYNQ_SLAVE for slave addr 22880bdffe71SHeiko Schocher 2289e717fc6dSNaveen Krishna Ch - drivers/i2c/s3c24x0_i2c.c: 2290e717fc6dSNaveen Krishna Ch - activate this driver with CONFIG_SYS_I2C_S3C24X0 2291e717fc6dSNaveen Krishna Ch - This driver adds i2c buses (11 for Exynos5250, Exynos5420 2292e717fc6dSNaveen Krishna Ch 9 i2c buses for Exynos4 and 1 for S3C24X0 SoCs from Samsung) 2293e717fc6dSNaveen Krishna Ch with a fix speed from 100000 and the slave addr 0! 2294e717fc6dSNaveen Krishna Ch 2295b46226bdSDirk Eibach - drivers/i2c/ihs_i2c.c 2296b46226bdSDirk Eibach - activate this driver with CONFIG_SYS_I2C_IHS 2297b46226bdSDirk Eibach - CONFIG_SYS_I2C_IHS_CH0 activate hardware channel 0 2298b46226bdSDirk Eibach - CONFIG_SYS_I2C_IHS_SPEED_0 speed channel 0 2299b46226bdSDirk Eibach - CONFIG_SYS_I2C_IHS_SLAVE_0 slave addr channel 0 2300b46226bdSDirk Eibach - CONFIG_SYS_I2C_IHS_CH1 activate hardware channel 1 2301b46226bdSDirk Eibach - CONFIG_SYS_I2C_IHS_SPEED_1 speed channel 1 2302b46226bdSDirk Eibach - CONFIG_SYS_I2C_IHS_SLAVE_1 slave addr channel 1 2303b46226bdSDirk Eibach - CONFIG_SYS_I2C_IHS_CH2 activate hardware channel 2 2304b46226bdSDirk Eibach - CONFIG_SYS_I2C_IHS_SPEED_2 speed channel 2 2305b46226bdSDirk Eibach - CONFIG_SYS_I2C_IHS_SLAVE_2 slave addr channel 2 2306b46226bdSDirk Eibach - CONFIG_SYS_I2C_IHS_CH3 activate hardware channel 3 2307b46226bdSDirk Eibach - CONFIG_SYS_I2C_IHS_SPEED_3 speed channel 3 2308b46226bdSDirk Eibach - CONFIG_SYS_I2C_IHS_SLAVE_3 slave addr channel 3 2309b46226bdSDirk Eibach 23103f4978c7SHeiko Schocher additional defines: 23113f4978c7SHeiko Schocher 23123f4978c7SHeiko Schocher CONFIG_SYS_NUM_I2C_BUSES 23133f4978c7SHeiko Schocher Hold the number of i2c busses you want to use. If you 23143f4978c7SHeiko Schocher don't use/have i2c muxes on your i2c bus, this 23153f4978c7SHeiko Schocher is equal to CONFIG_SYS_NUM_I2C_ADAPTERS, and you can 23163f4978c7SHeiko Schocher omit this define. 23173f4978c7SHeiko Schocher 23183f4978c7SHeiko Schocher CONFIG_SYS_I2C_DIRECT_BUS 23193f4978c7SHeiko Schocher define this, if you don't use i2c muxes on your hardware. 23203f4978c7SHeiko Schocher if CONFIG_SYS_I2C_MAX_HOPS is not defined or == 0 you can 23213f4978c7SHeiko Schocher omit this define. 23223f4978c7SHeiko Schocher 23233f4978c7SHeiko Schocher CONFIG_SYS_I2C_MAX_HOPS 23243f4978c7SHeiko Schocher define how many muxes are maximal consecutively connected 23253f4978c7SHeiko Schocher on one i2c bus. If you not use i2c muxes, omit this 23263f4978c7SHeiko Schocher define. 23273f4978c7SHeiko Schocher 23283f4978c7SHeiko Schocher CONFIG_SYS_I2C_BUSES 23293f4978c7SHeiko Schocher hold a list of busses you want to use, only used if 23303f4978c7SHeiko Schocher CONFIG_SYS_I2C_DIRECT_BUS is not defined, for example 23313f4978c7SHeiko Schocher a board with CONFIG_SYS_I2C_MAX_HOPS = 1 and 23323f4978c7SHeiko Schocher CONFIG_SYS_NUM_I2C_BUSES = 9: 23333f4978c7SHeiko Schocher 23343f4978c7SHeiko Schocher CONFIG_SYS_I2C_BUSES {{0, {I2C_NULL_HOP}}, \ 23353f4978c7SHeiko Schocher {0, {{I2C_MUX_PCA9547, 0x70, 1}}}, \ 23363f4978c7SHeiko Schocher {0, {{I2C_MUX_PCA9547, 0x70, 2}}}, \ 23373f4978c7SHeiko Schocher {0, {{I2C_MUX_PCA9547, 0x70, 3}}}, \ 23383f4978c7SHeiko Schocher {0, {{I2C_MUX_PCA9547, 0x70, 4}}}, \ 23393f4978c7SHeiko Schocher {0, {{I2C_MUX_PCA9547, 0x70, 5}}}, \ 23403f4978c7SHeiko Schocher {1, {I2C_NULL_HOP}}, \ 23413f4978c7SHeiko Schocher {1, {{I2C_MUX_PCA9544, 0x72, 1}}}, \ 23423f4978c7SHeiko Schocher {1, {{I2C_MUX_PCA9544, 0x72, 2}}}, \ 23433f4978c7SHeiko Schocher } 23443f4978c7SHeiko Schocher 23453f4978c7SHeiko Schocher which defines 23463f4978c7SHeiko Schocher bus 0 on adapter 0 without a mux 2347ea818dbbSHeiko Schocher bus 1 on adapter 0 with a PCA9547 on address 0x70 port 1 2348ea818dbbSHeiko Schocher bus 2 on adapter 0 with a PCA9547 on address 0x70 port 2 2349ea818dbbSHeiko Schocher bus 3 on adapter 0 with a PCA9547 on address 0x70 port 3 2350ea818dbbSHeiko Schocher bus 4 on adapter 0 with a PCA9547 on address 0x70 port 4 2351ea818dbbSHeiko Schocher bus 5 on adapter 0 with a PCA9547 on address 0x70 port 5 23523f4978c7SHeiko Schocher bus 6 on adapter 1 without a mux 2353ea818dbbSHeiko Schocher bus 7 on adapter 1 with a PCA9544 on address 0x72 port 1 2354ea818dbbSHeiko Schocher bus 8 on adapter 1 with a PCA9544 on address 0x72 port 2 23553f4978c7SHeiko Schocher 23563f4978c7SHeiko Schocher If you do not have i2c muxes on your board, omit this define. 23573f4978c7SHeiko Schocher 2358ea818dbbSHeiko Schocher- Legacy I2C Support: CONFIG_HARD_I2C 23593f4978c7SHeiko Schocher 23603f4978c7SHeiko Schocher NOTE: It is intended to move drivers to CONFIG_SYS_I2C which 23613f4978c7SHeiko Schocher provides the following compelling advantages: 23623f4978c7SHeiko Schocher 23633f4978c7SHeiko Schocher - more than one i2c adapter is usable 23643f4978c7SHeiko Schocher - approved multibus support 23653f4978c7SHeiko Schocher - better i2c mux support 23663f4978c7SHeiko Schocher 23673f4978c7SHeiko Schocher ** Please consider updating your I2C driver now. ** 23683f4978c7SHeiko Schocher 2369ea818dbbSHeiko Schocher These enable legacy I2C serial bus commands. Defining 2370ea818dbbSHeiko Schocher CONFIG_HARD_I2C will include the appropriate I2C driver 2371ea818dbbSHeiko Schocher for the selected CPU. 2372c609719bSwdenk 2373b37c7e5eSwdenk This will allow you to use i2c commands at the u-boot 2374602ad3b3SJon Loeliger command line (as long as you set CONFIG_CMD_I2C in 2375b37c7e5eSwdenk CONFIG_COMMANDS) and communicate with i2c based realtime 2376b37c7e5eSwdenk clock chips. See common/cmd_i2c.c for a description of the 2377c609719bSwdenk command line interface. 2378c609719bSwdenk 2379bb99ad6dSBen Warren CONFIG_HARD_I2C selects a hardware I2C controller. 2380c609719bSwdenk 2381b37c7e5eSwdenk There are several other quantities that must also be 2382ea818dbbSHeiko Schocher defined when you define CONFIG_HARD_I2C. 2383c609719bSwdenk 23846d0f6bcfSJean-Christophe PLAGNIOL-VILLARD In both cases you will need to define CONFIG_SYS_I2C_SPEED 2385b37c7e5eSwdenk to be the frequency (in Hz) at which you wish your i2c bus 23866d0f6bcfSJean-Christophe PLAGNIOL-VILLARD to run and CONFIG_SYS_I2C_SLAVE to be the address of this node (ie 238711ccc33fSMarcel Ziswiler the CPU's i2c node address). 2388c609719bSwdenk 23898d321b81SPeter Tyser Now, the u-boot i2c code for the mpc8xx 2390a47a12beSStefan Roese (arch/powerpc/cpu/mpc8xx/i2c.c) sets the CPU up as a master node 23918d321b81SPeter Tyser and so its address should therefore be cleared to 0 (See, 23928d321b81SPeter Tyser eg, MPC823e User's Manual p.16-473). So, set 23938d321b81SPeter Tyser CONFIG_SYS_I2C_SLAVE to 0. 2394b37c7e5eSwdenk 23955da71efaSEric Millbrandt CONFIG_SYS_I2C_INIT_MPC5XXX 23965da71efaSEric Millbrandt 23975da71efaSEric Millbrandt When a board is reset during an i2c bus transfer 23985da71efaSEric Millbrandt chips might think that the current transfer is still 23995da71efaSEric Millbrandt in progress. Reset the slave devices by sending start 24005da71efaSEric Millbrandt commands until the slave device responds. 24015da71efaSEric Millbrandt 2402b37c7e5eSwdenk That's all that's required for CONFIG_HARD_I2C. 2403b37c7e5eSwdenk 2404ea818dbbSHeiko Schocher If you use the software i2c interface (CONFIG_SYS_I2C_SOFT) 2405b37c7e5eSwdenk then the following macros need to be defined (examples are 2406b37c7e5eSwdenk from include/configs/lwmon.h): 2407c609719bSwdenk 2408c609719bSwdenk I2C_INIT 2409c609719bSwdenk 2410b37c7e5eSwdenk (Optional). Any commands necessary to enable the I2C 2411c609719bSwdenk controller or configure ports. 2412c609719bSwdenk 2413b37c7e5eSwdenk eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) 2414b37c7e5eSwdenk 2415c609719bSwdenk I2C_PORT 2416c609719bSwdenk 2417c609719bSwdenk (Only for MPC8260 CPU). The I/O port to use (the code 2418c609719bSwdenk assumes both bits are on the same port). Valid values 2419c609719bSwdenk are 0..3 for ports A..D. 2420c609719bSwdenk 2421c609719bSwdenk I2C_ACTIVE 2422c609719bSwdenk 2423c609719bSwdenk The code necessary to make the I2C data line active 2424c609719bSwdenk (driven). If the data line is open collector, this 2425c609719bSwdenk define can be null. 2426c609719bSwdenk 2427b37c7e5eSwdenk eg: #define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) 2428b37c7e5eSwdenk 2429c609719bSwdenk I2C_TRISTATE 2430c609719bSwdenk 2431c609719bSwdenk The code necessary to make the I2C data line tri-stated 2432c609719bSwdenk (inactive). If the data line is open collector, this 2433c609719bSwdenk define can be null. 2434c609719bSwdenk 2435b37c7e5eSwdenk eg: #define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) 2436b37c7e5eSwdenk 2437c609719bSwdenk I2C_READ 2438c609719bSwdenk 2439472d5460SYork Sun Code that returns true if the I2C data line is high, 2440472d5460SYork Sun false if it is low. 2441c609719bSwdenk 2442b37c7e5eSwdenk eg: #define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) 2443b37c7e5eSwdenk 2444c609719bSwdenk I2C_SDA(bit) 2445c609719bSwdenk 2446472d5460SYork Sun If <bit> is true, sets the I2C data line high. If it 2447472d5460SYork Sun is false, it clears it (low). 2448c609719bSwdenk 2449b37c7e5eSwdenk eg: #define I2C_SDA(bit) \ 2450b37c7e5eSwdenk if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ 2451b37c7e5eSwdenk else immr->im_cpm.cp_pbdat &= ~PB_SDA 2452b37c7e5eSwdenk 2453c609719bSwdenk I2C_SCL(bit) 2454c609719bSwdenk 2455472d5460SYork Sun If <bit> is true, sets the I2C clock line high. If it 2456472d5460SYork Sun is false, it clears it (low). 2457c609719bSwdenk 2458b37c7e5eSwdenk eg: #define I2C_SCL(bit) \ 2459b37c7e5eSwdenk if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ 2460b37c7e5eSwdenk else immr->im_cpm.cp_pbdat &= ~PB_SCL 2461b37c7e5eSwdenk 2462c609719bSwdenk I2C_DELAY 2463c609719bSwdenk 2464c609719bSwdenk This delay is invoked four times per clock cycle so this 2465c609719bSwdenk controls the rate of data transfer. The data rate thus 2466b37c7e5eSwdenk is 1 / (I2C_DELAY * 4). Often defined to be something 2467b37c7e5eSwdenk like: 2468b37c7e5eSwdenk 2469b37c7e5eSwdenk #define I2C_DELAY udelay(2) 2470c609719bSwdenk 2471793b5726SMike Frysinger CONFIG_SOFT_I2C_GPIO_SCL / CONFIG_SOFT_I2C_GPIO_SDA 2472793b5726SMike Frysinger 2473793b5726SMike Frysinger If your arch supports the generic GPIO framework (asm/gpio.h), 2474793b5726SMike Frysinger then you may alternatively define the two GPIOs that are to be 2475793b5726SMike Frysinger used as SCL / SDA. Any of the previous I2C_xxx macros will 2476793b5726SMike Frysinger have GPIO-based defaults assigned to them as appropriate. 2477793b5726SMike Frysinger 2478793b5726SMike Frysinger You should define these to the GPIO value as given directly to 2479793b5726SMike Frysinger the generic GPIO functions. 2480793b5726SMike Frysinger 24816d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_I2C_INIT_BOARD 248247cd00faSwdenk 248347cd00faSwdenk When a board is reset during an i2c bus transfer 248447cd00faSwdenk chips might think that the current transfer is still 248547cd00faSwdenk in progress. On some boards it is possible to access 248647cd00faSwdenk the i2c SCLK line directly, either by using the 248747cd00faSwdenk processor pin as a GPIO or by having a second pin 248847cd00faSwdenk connected to the bus. If this option is defined a 248947cd00faSwdenk custom i2c_init_board() routine in boards/xxx/board.c 249047cd00faSwdenk is run early in the boot sequence. 249147cd00faSwdenk 249226a33504SRichard Retanubun CONFIG_SYS_I2C_BOARD_LATE_INIT 249326a33504SRichard Retanubun 249426a33504SRichard Retanubun An alternative to CONFIG_SYS_I2C_INIT_BOARD. If this option is 249526a33504SRichard Retanubun defined a custom i2c_board_late_init() routine in 249626a33504SRichard Retanubun boards/xxx/board.c is run AFTER the operations in i2c_init() 249726a33504SRichard Retanubun is completed. This callpoint can be used to unreset i2c bus 249826a33504SRichard Retanubun using CPU i2c controller register accesses for CPUs whose i2c 249926a33504SRichard Retanubun controller provide such a method. It is called at the end of 250026a33504SRichard Retanubun i2c_init() to allow i2c_init operations to setup the i2c bus 250126a33504SRichard Retanubun controller on the CPU (e.g. setting bus speed & slave address). 250226a33504SRichard Retanubun 250317ea1177Swdenk CONFIG_I2CFAST (PPC405GP|PPC405EP only) 250417ea1177Swdenk 250517ea1177Swdenk This option enables configuration of bi_iic_fast[] flags 250617ea1177Swdenk in u-boot bd_info structure based on u-boot environment 250717ea1177Swdenk variable "i2cfast". (see also i2cfast) 250817ea1177Swdenk 2509bb99ad6dSBen Warren CONFIG_I2C_MULTI_BUS 2510bb99ad6dSBen Warren 2511bb99ad6dSBen Warren This option allows the use of multiple I2C buses, each of which 2512bb99ad6dSBen Warren must have a controller. At any point in time, only one bus is 2513bb99ad6dSBen Warren active. To switch to a different bus, use the 'i2c dev' command. 2514bb99ad6dSBen Warren Note that bus numbering is zero-based. 2515bb99ad6dSBen Warren 25166d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_I2C_NOPROBES 2517bb99ad6dSBen Warren 2518bb99ad6dSBen Warren This option specifies a list of I2C devices that will be skipped 25190f89c54bSPeter Tyser when the 'i2c probe' command is issued. If CONFIG_I2C_MULTI_BUS 25200f89c54bSPeter Tyser is set, specify a list of bus-device pairs. Otherwise, specify 25210f89c54bSPeter Tyser a 1D array of device addresses 2522bb99ad6dSBen Warren 2523bb99ad6dSBen Warren e.g. 2524bb99ad6dSBen Warren #undef CONFIG_I2C_MULTI_BUS 25256d0f6bcfSJean-Christophe PLAGNIOL-VILLARD #define CONFIG_SYS_I2C_NOPROBES {0x50,0x68} 2526bb99ad6dSBen Warren 2527bb99ad6dSBen Warren will skip addresses 0x50 and 0x68 on a board with one I2C bus 2528bb99ad6dSBen Warren 2529bb99ad6dSBen Warren #define CONFIG_I2C_MULTI_BUS 25306d0f6bcfSJean-Christophe PLAGNIOL-VILLARD #define CONFIG_SYS_I2C_MULTI_NOPROBES {{0,0x50},{0,0x68},{1,0x54}} 2531bb99ad6dSBen Warren 2532bb99ad6dSBen Warren will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1 2533bb99ad6dSBen Warren 25346d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SPD_BUS_NUM 2535be5e6181STimur Tabi 2536be5e6181STimur Tabi If defined, then this indicates the I2C bus number for DDR SPD. 2537be5e6181STimur Tabi If not defined, then U-Boot assumes that SPD is on I2C bus 0. 2538be5e6181STimur Tabi 25396d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_RTC_BUS_NUM 25400dc018ecSStefan Roese 25410dc018ecSStefan Roese If defined, then this indicates the I2C bus number for the RTC. 25420dc018ecSStefan Roese If not defined, then U-Boot assumes that RTC is on I2C bus 0. 25430dc018ecSStefan Roese 25446d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_DTT_BUS_NUM 25450dc018ecSStefan Roese 25460dc018ecSStefan Roese If defined, then this indicates the I2C bus number for the DTT. 25470dc018ecSStefan Roese If not defined, then U-Boot assumes that DTT is on I2C bus 0. 25480dc018ecSStefan Roese 25496d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_I2C_DTT_ADDR: 25509ebbb54fSVictor Gallardo 25519ebbb54fSVictor Gallardo If defined, specifies the I2C address of the DTT device. 25529ebbb54fSVictor Gallardo If not defined, then U-Boot uses predefined value for 25539ebbb54fSVictor Gallardo specified DTT device. 25549ebbb54fSVictor Gallardo 25552ac6985aSAndrew Dyer CONFIG_SOFT_I2C_READ_REPEATED_START 25562ac6985aSAndrew Dyer 25572ac6985aSAndrew Dyer defining this will force the i2c_read() function in 25582ac6985aSAndrew Dyer the soft_i2c driver to perform an I2C repeated start 25592ac6985aSAndrew Dyer between writing the address pointer and reading the 25602ac6985aSAndrew Dyer data. If this define is omitted the default behaviour 25612ac6985aSAndrew Dyer of doing a stop-start sequence will be used. Most I2C 25622ac6985aSAndrew Dyer devices can use either method, but some require one or 25632ac6985aSAndrew Dyer the other. 2564be5e6181STimur Tabi 2565c609719bSwdenk- SPI Support: CONFIG_SPI 2566c609719bSwdenk 2567c609719bSwdenk Enables SPI driver (so far only tested with 2568c609719bSwdenk SPI EEPROM, also an instance works with Crystal A/D and 2569c609719bSwdenk D/As on the SACSng board) 2570c609719bSwdenk 25716639562eSYoshihiro Shimoda CONFIG_SH_SPI 25726639562eSYoshihiro Shimoda 25736639562eSYoshihiro Shimoda Enables the driver for SPI controller on SuperH. Currently 25746639562eSYoshihiro Shimoda only SH7757 is supported. 25756639562eSYoshihiro Shimoda 2576c609719bSwdenk CONFIG_SPI_X 2577c609719bSwdenk 2578c609719bSwdenk Enables extended (16-bit) SPI EEPROM addressing. 2579c609719bSwdenk (symmetrical to CONFIG_I2C_X) 2580c609719bSwdenk 2581c609719bSwdenk CONFIG_SOFT_SPI 2582c609719bSwdenk 2583c609719bSwdenk Enables a software (bit-bang) SPI driver rather than 2584c609719bSwdenk using hardware support. This is a general purpose 2585c609719bSwdenk driver that only requires three general I/O port pins 2586c609719bSwdenk (two outputs, one input) to function. If this is 2587c609719bSwdenk defined, the board configuration must define several 2588c609719bSwdenk SPI configuration items (port pins to use, etc). For 2589c609719bSwdenk an example, see include/configs/sacsng.h. 2590c609719bSwdenk 259104a9e118SBen Warren CONFIG_HARD_SPI 259204a9e118SBen Warren 259304a9e118SBen Warren Enables a hardware SPI driver for general-purpose reads 259404a9e118SBen Warren and writes. As with CONFIG_SOFT_SPI, the board configuration 259504a9e118SBen Warren must define a list of chip-select function pointers. 259604a9e118SBen Warren Currently supported on some MPC8xxx processors. For an 259704a9e118SBen Warren example, see include/configs/mpc8349emds.h. 259804a9e118SBen Warren 259938254f45SGuennadi Liakhovetski CONFIG_MXC_SPI 260038254f45SGuennadi Liakhovetski 260138254f45SGuennadi Liakhovetski Enables the driver for the SPI controllers on i.MX and MXC 26022e3cd1cdSFabio Estevam SoCs. Currently i.MX31/35/51 are supported. 260338254f45SGuennadi Liakhovetski 26040133502eSMatthias Fuchs- FPGA Support: CONFIG_FPGA 26050133502eSMatthias Fuchs 26060133502eSMatthias Fuchs Enables FPGA subsystem. 26070133502eSMatthias Fuchs 26080133502eSMatthias Fuchs CONFIG_FPGA_<vendor> 26090133502eSMatthias Fuchs 26100133502eSMatthias Fuchs Enables support for specific chip vendors. 26110133502eSMatthias Fuchs (ALTERA, XILINX) 26120133502eSMatthias Fuchs 26130133502eSMatthias Fuchs CONFIG_FPGA_<family> 26140133502eSMatthias Fuchs 26150133502eSMatthias Fuchs Enables support for FPGA family. 26160133502eSMatthias Fuchs (SPARTAN2, SPARTAN3, VIRTEX2, CYCLONE2, ACEX1K, ACEX) 26170133502eSMatthias Fuchs 26180133502eSMatthias Fuchs CONFIG_FPGA_COUNT 2619c609719bSwdenk 2620c609719bSwdenk Specify the number of FPGA devices to support. 2621c609719bSwdenk 262264e809afSSiva Durga Prasad Paladugu CONFIG_CMD_FPGA_LOADMK 262364e809afSSiva Durga Prasad Paladugu 262464e809afSSiva Durga Prasad Paladugu Enable support for fpga loadmk command 262564e809afSSiva Durga Prasad Paladugu 262667193864SMichal Simek CONFIG_CMD_FPGA_LOADP 262767193864SMichal Simek 262867193864SMichal Simek Enable support for fpga loadp command - load partial bitstream 262967193864SMichal Simek 263067193864SMichal Simek CONFIG_CMD_FPGA_LOADBP 263167193864SMichal Simek 263267193864SMichal Simek Enable support for fpga loadbp command - load partial bitstream 263367193864SMichal Simek (Xilinx only) 263467193864SMichal Simek 26356d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_PROG_FEEDBACK 2636c609719bSwdenk 2637c609719bSwdenk Enable printing of hash marks during FPGA configuration. 2638c609719bSwdenk 26396d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_CHECK_BUSY 2640c609719bSwdenk 2641c609719bSwdenk Enable checks on FPGA configuration interface busy 2642c609719bSwdenk status by the configuration function. This option 2643c609719bSwdenk will require a board or device specific function to 2644c609719bSwdenk be written. 2645c609719bSwdenk 2646c609719bSwdenk CONFIG_FPGA_DELAY 2647c609719bSwdenk 2648c609719bSwdenk If defined, a function that provides delays in the FPGA 2649c609719bSwdenk configuration driver. 2650c609719bSwdenk 26516d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_CHECK_CTRLC 2652c609719bSwdenk Allow Control-C to interrupt FPGA configuration 2653c609719bSwdenk 26546d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_CHECK_ERROR 2655c609719bSwdenk 2656c609719bSwdenk Check for configuration errors during FPGA bitfile 2657c609719bSwdenk loading. For example, abort during Virtex II 2658c609719bSwdenk configuration if the INIT_B line goes low (which 2659c609719bSwdenk indicated a CRC error). 2660c609719bSwdenk 26616d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_WAIT_INIT 2662c609719bSwdenk 2663c609719bSwdenk Maximum time to wait for the INIT_B line to deassert 2664c609719bSwdenk after PROB_B has been deasserted during a Virtex II 2665c609719bSwdenk FPGA configuration sequence. The default time is 500 266611ccc33fSMarcel Ziswiler ms. 2667c609719bSwdenk 26686d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_WAIT_BUSY 2669c609719bSwdenk 2670c609719bSwdenk Maximum time to wait for BUSY to deassert during 267111ccc33fSMarcel Ziswiler Virtex II FPGA configuration. The default is 5 ms. 2672c609719bSwdenk 26736d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_WAIT_CONFIG 2674c609719bSwdenk 2675c609719bSwdenk Time to wait after FPGA configuration. The default is 267611ccc33fSMarcel Ziswiler 200 ms. 2677c609719bSwdenk 2678c609719bSwdenk- Configuration Management: 2679c609719bSwdenk CONFIG_IDENT_STRING 2680c609719bSwdenk 2681c609719bSwdenk If defined, this string will be added to the U-Boot 2682c609719bSwdenk version information (U_BOOT_VERSION) 2683c609719bSwdenk 2684c609719bSwdenk- Vendor Parameter Protection: 2685c609719bSwdenk 2686c609719bSwdenk U-Boot considers the values of the environment 2687c609719bSwdenk variables "serial#" (Board Serial Number) and 26887152b1d0Swdenk "ethaddr" (Ethernet Address) to be parameters that 2689c609719bSwdenk are set once by the board vendor / manufacturer, and 2690c609719bSwdenk protects these variables from casual modification by 2691c609719bSwdenk the user. Once set, these variables are read-only, 2692c609719bSwdenk and write or delete attempts are rejected. You can 269311ccc33fSMarcel Ziswiler change this behaviour: 2694c609719bSwdenk 2695c609719bSwdenk If CONFIG_ENV_OVERWRITE is #defined in your config 2696c609719bSwdenk file, the write protection for vendor parameters is 269747cd00faSwdenk completely disabled. Anybody can change or delete 2698c609719bSwdenk these parameters. 2699c609719bSwdenk 2700c609719bSwdenk Alternatively, if you #define _both_ CONFIG_ETHADDR 2701c609719bSwdenk _and_ CONFIG_OVERWRITE_ETHADDR_ONCE, a default 270211ccc33fSMarcel Ziswiler Ethernet address is installed in the environment, 2703c609719bSwdenk which can be changed exactly ONCE by the user. [The 2704c609719bSwdenk serial# is unaffected by this, i. e. it remains 2705c609719bSwdenk read-only.] 2706c609719bSwdenk 27072598090bSJoe Hershberger The same can be accomplished in a more flexible way 27082598090bSJoe Hershberger for any variable by configuring the type of access 27092598090bSJoe Hershberger to allow for those variables in the ".flags" variable 27102598090bSJoe Hershberger or define CONFIG_ENV_FLAGS_LIST_STATIC. 27112598090bSJoe Hershberger 2712c609719bSwdenk- Protected RAM: 2713c609719bSwdenk CONFIG_PRAM 2714c609719bSwdenk 2715c609719bSwdenk Define this variable to enable the reservation of 2716c609719bSwdenk "protected RAM", i. e. RAM which is not overwritten 2717c609719bSwdenk by U-Boot. Define CONFIG_PRAM to hold the number of 2718c609719bSwdenk kB you want to reserve for pRAM. You can overwrite 2719c609719bSwdenk this default value by defining an environment 2720c609719bSwdenk variable "pram" to the number of kB you want to 2721c609719bSwdenk reserve. Note that the board info structure will 2722c609719bSwdenk still show the full amount of RAM. If pRAM is 2723c609719bSwdenk reserved, a new environment variable "mem" will 2724c609719bSwdenk automatically be defined to hold the amount of 2725c609719bSwdenk remaining RAM in a form that can be passed as boot 2726c609719bSwdenk argument to Linux, for instance like that: 2727c609719bSwdenk 2728fe126d8bSWolfgang Denk setenv bootargs ... mem=\${mem} 2729c609719bSwdenk saveenv 2730c609719bSwdenk 2731c609719bSwdenk This way you can tell Linux not to use this memory, 2732c609719bSwdenk either, which results in a memory region that will 2733c609719bSwdenk not be affected by reboots. 2734c609719bSwdenk 2735c609719bSwdenk *WARNING* If your board configuration uses automatic 2736c609719bSwdenk detection of the RAM size, you must make sure that 2737c609719bSwdenk this memory test is non-destructive. So far, the 2738c609719bSwdenk following board configurations are known to be 2739c609719bSwdenk "pRAM-clean": 2740c609719bSwdenk 27411b0757ecSWolfgang Denk IVMS8, IVML24, SPD8xx, TQM8xxL, 27421b0757ecSWolfgang Denk HERMES, IP860, RPXlite, LWMON, 2743544d97e9SWolfgang Denk FLAGADM, TQM8260 2744c609719bSwdenk 274540fef049SGabe Black- Access to physical memory region (> 4GB) 274640fef049SGabe Black Some basic support is provided for operations on memory not 274740fef049SGabe Black normally accessible to U-Boot - e.g. some architectures 274840fef049SGabe Black support access to more than 4GB of memory on 32-bit 274940fef049SGabe Black machines using physical address extension or similar. 275040fef049SGabe Black Define CONFIG_PHYSMEM to access this basic support, which 275140fef049SGabe Black currently only supports clearing the memory. 275240fef049SGabe Black 2753c609719bSwdenk- Error Recovery: 2754c609719bSwdenk CONFIG_PANIC_HANG 2755c609719bSwdenk 2756c609719bSwdenk Define this variable to stop the system in case of a 2757c609719bSwdenk fatal error, so that you have to reset it manually. 2758c609719bSwdenk This is probably NOT a good idea for an embedded 275911ccc33fSMarcel Ziswiler system where you want the system to reboot 2760c609719bSwdenk automatically as fast as possible, but it may be 2761c609719bSwdenk useful during development since you can try to debug 2762c609719bSwdenk the conditions that lead to the situation. 2763c609719bSwdenk 2764c609719bSwdenk CONFIG_NET_RETRY_COUNT 2765c609719bSwdenk 2766c609719bSwdenk This variable defines the number of retries for 2767c609719bSwdenk network operations like ARP, RARP, TFTP, or BOOTP 2768c609719bSwdenk before giving up the operation. If not defined, a 2769c609719bSwdenk default value of 5 is used. 2770c609719bSwdenk 277140cb90eeSGuennadi Liakhovetski CONFIG_ARP_TIMEOUT 277240cb90eeSGuennadi Liakhovetski 277340cb90eeSGuennadi Liakhovetski Timeout waiting for an ARP reply in milliseconds. 277440cb90eeSGuennadi Liakhovetski 277548a3e999STetsuyuki Kobayashi CONFIG_NFS_TIMEOUT 277648a3e999STetsuyuki Kobayashi 277748a3e999STetsuyuki Kobayashi Timeout in milliseconds used in NFS protocol. 277848a3e999STetsuyuki Kobayashi If you encounter "ERROR: Cannot umount" in nfs command, 277948a3e999STetsuyuki Kobayashi try longer timeout such as 278048a3e999STetsuyuki Kobayashi #define CONFIG_NFS_TIMEOUT 10000UL 278148a3e999STetsuyuki Kobayashi 2782c609719bSwdenk- Command Interpreter: 27838078f1a5SWolfgang Denk CONFIG_AUTO_COMPLETE 278404a85b3bSwdenk 278504a85b3bSwdenk Enable auto completion of commands using TAB. 278604a85b3bSwdenk 27878078f1a5SWolfgang Denk Note that this feature has NOT been implemented yet 27888078f1a5SWolfgang Denk for the "hush" shell. 27898078f1a5SWolfgang Denk 27908078f1a5SWolfgang Denk 27916d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_HUSH_PARSER 2792c609719bSwdenk 2793c609719bSwdenk Define this variable to enable the "hush" shell (from 2794c609719bSwdenk Busybox) as command line interpreter, thus enabling 2795c609719bSwdenk powerful command line syntax like 2796c609719bSwdenk if...then...else...fi conditionals or `&&' and '||' 2797c609719bSwdenk constructs ("shell scripts"). 2798c609719bSwdenk 2799c609719bSwdenk If undefined, you get the old, much simpler behaviour 2800c609719bSwdenk with a somewhat smaller memory footprint. 2801c609719bSwdenk 2802c609719bSwdenk 28036d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PROMPT_HUSH_PS2 2804c609719bSwdenk 2805c609719bSwdenk This defines the secondary prompt string, which is 2806c609719bSwdenk printed when the command interpreter needs more input 2807c609719bSwdenk to complete a command. Usually "> ". 2808c609719bSwdenk 2809c609719bSwdenk Note: 2810c609719bSwdenk 2811c609719bSwdenk In the current implementation, the local variables 2812c609719bSwdenk space and global environment variables space are 2813c609719bSwdenk separated. Local variables are those you define by 28143b57fe0aSwdenk simply typing `name=value'. To access a local 2815c609719bSwdenk variable later on, you have write `$name' or 28163b57fe0aSwdenk `${name}'; to execute the contents of a variable 28173b57fe0aSwdenk directly type `$name' at the command prompt. 2818c609719bSwdenk 2819c609719bSwdenk Global environment variables are those you use 2820c609719bSwdenk setenv/printenv to work with. To run a command stored 2821c609719bSwdenk in such a variable, you need to use the run command, 2822c609719bSwdenk and you must not use the '$' sign to access them. 2823c609719bSwdenk 2824c609719bSwdenk To store commands and special characters in a 2825c609719bSwdenk variable, please use double quotation marks 2826c609719bSwdenk surrounding the whole text of the variable, instead 2827c609719bSwdenk of the backslashes before semicolons and special 2828c609719bSwdenk symbols. 2829c609719bSwdenk 2830aa0c71acSWolfgang Denk- Commandline Editing and History: 2831aa0c71acSWolfgang Denk CONFIG_CMDLINE_EDITING 2832aa0c71acSWolfgang Denk 283311ccc33fSMarcel Ziswiler Enable editing and History functions for interactive 2834aa0c71acSWolfgang Denk commandline input operations 2835aa0c71acSWolfgang Denk 2836a8c7c708Swdenk- Default Environment: 2837c609719bSwdenk CONFIG_EXTRA_ENV_SETTINGS 2838c609719bSwdenk 2839c609719bSwdenk Define this to contain any number of null terminated 2840c609719bSwdenk strings (variable = value pairs) that will be part of 28417152b1d0Swdenk the default environment compiled into the boot image. 28422262cfeeSwdenk 2843c609719bSwdenk For example, place something like this in your 2844c609719bSwdenk board's config file: 2845c609719bSwdenk 2846c609719bSwdenk #define CONFIG_EXTRA_ENV_SETTINGS \ 2847c609719bSwdenk "myvar1=value1\0" \ 2848c609719bSwdenk "myvar2=value2\0" 2849c609719bSwdenk 2850c609719bSwdenk Warning: This method is based on knowledge about the 2851c609719bSwdenk internal format how the environment is stored by the 28522262cfeeSwdenk U-Boot code. This is NOT an official, exported 2853c609719bSwdenk interface! Although it is unlikely that this format 28547152b1d0Swdenk will change soon, there is no guarantee either. 2855c609719bSwdenk You better know what you are doing here. 2856c609719bSwdenk 2857c609719bSwdenk Note: overly (ab)use of the default environment is 2858c609719bSwdenk discouraged. Make sure to check other ways to preset 285974de7aefSWolfgang Denk the environment like the "source" command or the 2860c609719bSwdenk boot command first. 2861c609719bSwdenk 28625e724ca2SStephen Warren CONFIG_ENV_VARS_UBOOT_CONFIG 28635e724ca2SStephen Warren 28645e724ca2SStephen Warren Define this in order to add variables describing the 28655e724ca2SStephen Warren U-Boot build configuration to the default environment. 28665e724ca2SStephen Warren These will be named arch, cpu, board, vendor, and soc. 28675e724ca2SStephen Warren 28685e724ca2SStephen Warren Enabling this option will cause the following to be defined: 28695e724ca2SStephen Warren 28705e724ca2SStephen Warren - CONFIG_SYS_ARCH 28715e724ca2SStephen Warren - CONFIG_SYS_CPU 28725e724ca2SStephen Warren - CONFIG_SYS_BOARD 28735e724ca2SStephen Warren - CONFIG_SYS_VENDOR 28745e724ca2SStephen Warren - CONFIG_SYS_SOC 28755e724ca2SStephen Warren 28767e27f89fSTom Rini CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 28777e27f89fSTom Rini 28787e27f89fSTom Rini Define this in order to add variables describing certain 28797e27f89fSTom Rini run-time determined information about the hardware to the 28807e27f89fSTom Rini environment. These will be named board_name, board_rev. 28817e27f89fSTom Rini 288206fd8538SSimon Glass CONFIG_DELAY_ENVIRONMENT 288306fd8538SSimon Glass 288406fd8538SSimon Glass Normally the environment is loaded when the board is 288506fd8538SSimon Glass intialised so that it is available to U-Boot. This inhibits 288606fd8538SSimon Glass that so that the environment is not available until 288706fd8538SSimon Glass explicitly loaded later by U-Boot code. With CONFIG_OF_CONTROL 288806fd8538SSimon Glass this is instead controlled by the value of 288906fd8538SSimon Glass /config/load-environment. 289006fd8538SSimon Glass 2891a8c7c708Swdenk- DataFlash Support: 28922abbe075Swdenk CONFIG_HAS_DATAFLASH 28932abbe075Swdenk 28942abbe075Swdenk Defining this option enables DataFlash features and 28952abbe075Swdenk allows to read/write in Dataflash via the standard 28962abbe075Swdenk commands cp, md... 28972abbe075Swdenk 2898f61ec45eSEric Nelson- Serial Flash support 2899f61ec45eSEric Nelson CONFIG_CMD_SF 2900f61ec45eSEric Nelson 2901f61ec45eSEric Nelson Defining this option enables SPI flash commands 2902f61ec45eSEric Nelson 'sf probe/read/write/erase/update'. 2903f61ec45eSEric Nelson 2904f61ec45eSEric Nelson Usage requires an initial 'probe' to define the serial 2905f61ec45eSEric Nelson flash parameters, followed by read/write/erase/update 2906f61ec45eSEric Nelson commands. 2907f61ec45eSEric Nelson 2908f61ec45eSEric Nelson The following defaults may be provided by the platform 2909f61ec45eSEric Nelson to handle the common case when only a single serial 2910f61ec45eSEric Nelson flash is present on the system. 2911f61ec45eSEric Nelson 2912f61ec45eSEric Nelson CONFIG_SF_DEFAULT_BUS Bus identifier 2913f61ec45eSEric Nelson CONFIG_SF_DEFAULT_CS Chip-select 2914f61ec45eSEric Nelson CONFIG_SF_DEFAULT_MODE (see include/spi.h) 2915f61ec45eSEric Nelson CONFIG_SF_DEFAULT_SPEED in Hz 2916f61ec45eSEric Nelson 291724007273SSimon Glass CONFIG_CMD_SF_TEST 291824007273SSimon Glass 291924007273SSimon Glass Define this option to include a destructive SPI flash 292024007273SSimon Glass test ('sf test'). 292124007273SSimon Glass 29221dcd6d03SJagannadha Sutradharudu Teki CONFIG_SPI_FLASH_BAR Ban/Extended Addr Reg 29231dcd6d03SJagannadha Sutradharudu Teki 29241dcd6d03SJagannadha Sutradharudu Teki Define this option to use the Bank addr/Extended addr 29251dcd6d03SJagannadha Sutradharudu Teki support on SPI flashes which has size > 16Mbytes. 29261dcd6d03SJagannadha Sutradharudu Teki 2927b902e07cSJagannadha Sutradharudu Teki CONFIG_SF_DUAL_FLASH Dual flash memories 2928b902e07cSJagannadha Sutradharudu Teki 2929b902e07cSJagannadha Sutradharudu Teki Define this option to use dual flash support where two flash 2930b902e07cSJagannadha Sutradharudu Teki memories can be connected with a given cs line. 2931b902e07cSJagannadha Sutradharudu Teki currently Xilinx Zynq qspi support these type of connections. 2932b902e07cSJagannadha Sutradharudu Teki 2933*562f8df1SHeiko Schocher CONFIG_SYS_SPI_ST_ENABLE_WP_PIN 2934*562f8df1SHeiko Schocher enable the W#/Vpp signal to disable writing to the status 2935*562f8df1SHeiko Schocher register on ST MICRON flashes like the N25Q128. 2936*562f8df1SHeiko Schocher The status register write enable/disable bit, combined with 2937*562f8df1SHeiko Schocher the W#/VPP signal provides hardware data protection for the 2938*562f8df1SHeiko Schocher device as follows: When the enable/disable bit is set to 1, 2939*562f8df1SHeiko Schocher and the W#/VPP signal is driven LOW, the status register 2940*562f8df1SHeiko Schocher nonvolatile bits become read-only and the WRITE STATUS REGISTER 2941*562f8df1SHeiko Schocher operation will not execute. The only way to exit this 2942*562f8df1SHeiko Schocher hardware-protected mode is to drive W#/VPP HIGH. 2943*562f8df1SHeiko Schocher 29443f85ce27Swdenk- SystemACE Support: 29453f85ce27Swdenk CONFIG_SYSTEMACE 29463f85ce27Swdenk 29473f85ce27Swdenk Adding this option adds support for Xilinx SystemACE 29483f85ce27Swdenk chips attached via some sort of local bus. The address 294911ccc33fSMarcel Ziswiler of the chip must also be defined in the 29506d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SYSTEMACE_BASE macro. For example: 29513f85ce27Swdenk 29523f85ce27Swdenk #define CONFIG_SYSTEMACE 29536d0f6bcfSJean-Christophe PLAGNIOL-VILLARD #define CONFIG_SYS_SYSTEMACE_BASE 0xf0000000 29543f85ce27Swdenk 29553f85ce27Swdenk When SystemACE support is added, the "ace" device type 29563f85ce27Swdenk becomes available to the fat commands, i.e. fatls. 29573f85ce27Swdenk 2958ecb0ccd9SWolfgang Denk- TFTP Fixed UDP Port: 2959ecb0ccd9SWolfgang Denk CONFIG_TFTP_PORT 2960ecb0ccd9SWolfgang Denk 296128cb9375SWolfgang Denk If this is defined, the environment variable tftpsrcp 2962ecb0ccd9SWolfgang Denk is used to supply the TFTP UDP source port value. 296328cb9375SWolfgang Denk If tftpsrcp isn't defined, the normal pseudo-random port 2964ecb0ccd9SWolfgang Denk number generator is used. 2965ecb0ccd9SWolfgang Denk 296628cb9375SWolfgang Denk Also, the environment variable tftpdstp is used to supply 296728cb9375SWolfgang Denk the TFTP UDP destination port value. If tftpdstp isn't 296828cb9375SWolfgang Denk defined, the normal port 69 is used. 296928cb9375SWolfgang Denk 297028cb9375SWolfgang Denk The purpose for tftpsrcp is to allow a TFTP server to 2971ecb0ccd9SWolfgang Denk blindly start the TFTP transfer using the pre-configured 2972ecb0ccd9SWolfgang Denk target IP address and UDP port. This has the effect of 2973ecb0ccd9SWolfgang Denk "punching through" the (Windows XP) firewall, allowing 2974ecb0ccd9SWolfgang Denk the remainder of the TFTP transfer to proceed normally. 2975ecb0ccd9SWolfgang Denk A better solution is to properly configure the firewall, 2976ecb0ccd9SWolfgang Denk but sometimes that is not allowed. 2977ecb0ccd9SWolfgang Denk 2978bf36c5d5SSimon Glass- Hashing support: 2979bf36c5d5SSimon Glass CONFIG_CMD_HASH 2980bf36c5d5SSimon Glass 2981bf36c5d5SSimon Glass This enables a generic 'hash' command which can produce 2982bf36c5d5SSimon Glass hashes / digests from a few algorithms (e.g. SHA1, SHA256). 2983bf36c5d5SSimon Glass 2984bf36c5d5SSimon Glass CONFIG_HASH_VERIFY 2985bf36c5d5SSimon Glass 2986bf36c5d5SSimon Glass Enable the hash verify command (hash -v). This adds to code 2987bf36c5d5SSimon Glass size a little. 2988bf36c5d5SSimon Glass 2989bf36c5d5SSimon Glass CONFIG_SHA1 - support SHA1 hashing 2990bf36c5d5SSimon Glass CONFIG_SHA256 - support SHA256 hashing 2991bf36c5d5SSimon Glass 2992bf36c5d5SSimon Glass Note: There is also a sha1sum command, which should perhaps 2993bf36c5d5SSimon Glass be deprecated in favour of 'hash sha1'. 2994bf36c5d5SSimon Glass 2995a11f1873SRobert Winkler- Freescale i.MX specific commands: 2996a11f1873SRobert Winkler CONFIG_CMD_HDMIDETECT 2997a11f1873SRobert Winkler This enables 'hdmidet' command which returns true if an 2998a11f1873SRobert Winkler HDMI monitor is detected. This command is i.MX 6 specific. 2999a11f1873SRobert Winkler 3000a11f1873SRobert Winkler CONFIG_CMD_BMODE 3001a11f1873SRobert Winkler This enables the 'bmode' (bootmode) command for forcing 3002a11f1873SRobert Winkler a boot from specific media. 3003a11f1873SRobert Winkler 3004a11f1873SRobert Winkler This is useful for forcing the ROM's usb downloader to 3005a11f1873SRobert Winkler activate upon a watchdog reset which is nice when iterating 3006a11f1873SRobert Winkler on U-Boot. Using the reset button or running bmode normal 3007a11f1873SRobert Winkler will set it back to normal. This command currently 3008a11f1873SRobert Winkler supports i.MX53 and i.MX6. 3009a11f1873SRobert Winkler 301019c402afSSimon Glass- Signing support: 301119c402afSSimon Glass CONFIG_RSA 301219c402afSSimon Glass 301319c402afSSimon Glass This enables the RSA algorithm used for FIT image verification 30148bf2aad7SDetlev Zundel in U-Boot. See doc/uImage.FIT/signature.txt for more information. 301519c402afSSimon Glass 301619c402afSSimon Glass The signing part is build into mkimage regardless of this 301719c402afSSimon Glass option. 301819c402afSSimon Glass 30199e50c406SHeiko Schocher- bootcount support: 30209e50c406SHeiko Schocher CONFIG_BOOTCOUNT_LIMIT 30219e50c406SHeiko Schocher 30229e50c406SHeiko Schocher This enables the bootcounter support, see: 30239e50c406SHeiko Schocher http://www.denx.de/wiki/DULG/UBootBootCountLimit 30249e50c406SHeiko Schocher 30259e50c406SHeiko Schocher CONFIG_AT91SAM9XE 30269e50c406SHeiko Schocher enable special bootcounter support on at91sam9xe based boards. 30279e50c406SHeiko Schocher CONFIG_BLACKFIN 30289e50c406SHeiko Schocher enable special bootcounter support on blackfin based boards. 30299e50c406SHeiko Schocher CONFIG_SOC_DA8XX 30309e50c406SHeiko Schocher enable special bootcounter support on da850 based boards. 30319e50c406SHeiko Schocher CONFIG_BOOTCOUNT_RAM 30329e50c406SHeiko Schocher enable support for the bootcounter in RAM 30339e50c406SHeiko Schocher CONFIG_BOOTCOUNT_I2C 30349e50c406SHeiko Schocher enable support for the bootcounter on an i2c (like RTC) device. 30359e50c406SHeiko Schocher CONFIG_SYS_I2C_RTC_ADDR = i2c chip address 30369e50c406SHeiko Schocher CONFIG_SYS_BOOTCOUNT_ADDR = i2c addr which is used for 30379e50c406SHeiko Schocher the bootcounter. 30389e50c406SHeiko Schocher CONFIG_BOOTCOUNT_ALEN = address len 303919c402afSSimon Glass 3040a8c7c708Swdenk- Show boot progress: 3041c609719bSwdenk CONFIG_SHOW_BOOT_PROGRESS 3042c609719bSwdenk 3043c609719bSwdenk Defining this option allows to add some board- 3044c609719bSwdenk specific code (calling a user-provided function 3045c609719bSwdenk "show_boot_progress(int)") that enables you to show 3046c609719bSwdenk the system's boot progress on some display (for 3047c609719bSwdenk example, some LED's) on your board. At the moment, 3048c609719bSwdenk the following checkpoints are implemented: 3049c609719bSwdenk 30503a608ca0SSimon Glass- Detailed boot stage timing 30513a608ca0SSimon Glass CONFIG_BOOTSTAGE 30523a608ca0SSimon Glass Define this option to get detailed timing of each stage 30533a608ca0SSimon Glass of the boot process. 30543a608ca0SSimon Glass 30553a608ca0SSimon Glass CONFIG_BOOTSTAGE_USER_COUNT 30563a608ca0SSimon Glass This is the number of available user bootstage records. 30573a608ca0SSimon Glass Each time you call bootstage_mark(BOOTSTAGE_ID_ALLOC, ...) 30583a608ca0SSimon Glass a new ID will be allocated from this stash. If you exceed 30593a608ca0SSimon Glass the limit, recording will stop. 30603a608ca0SSimon Glass 30613a608ca0SSimon Glass CONFIG_BOOTSTAGE_REPORT 30623a608ca0SSimon Glass Define this to print a report before boot, similar to this: 30633a608ca0SSimon Glass 30643a608ca0SSimon Glass Timer summary in microseconds: 30653a608ca0SSimon Glass Mark Elapsed Stage 30663a608ca0SSimon Glass 0 0 reset 30673a608ca0SSimon Glass 3,575,678 3,575,678 board_init_f start 30683a608ca0SSimon Glass 3,575,695 17 arch_cpu_init A9 30693a608ca0SSimon Glass 3,575,777 82 arch_cpu_init done 30703a608ca0SSimon Glass 3,659,598 83,821 board_init_r start 30713a608ca0SSimon Glass 3,910,375 250,777 main_loop 30723a608ca0SSimon Glass 29,916,167 26,005,792 bootm_start 30733a608ca0SSimon Glass 30,361,327 445,160 start_kernel 30743a608ca0SSimon Glass 30752eba38cfSSimon Glass CONFIG_CMD_BOOTSTAGE 30762eba38cfSSimon Glass Add a 'bootstage' command which supports printing a report 30772eba38cfSSimon Glass and un/stashing of bootstage data. 30782eba38cfSSimon Glass 307994fd1316SSimon Glass CONFIG_BOOTSTAGE_FDT 308094fd1316SSimon Glass Stash the bootstage information in the FDT. A root 'bootstage' 308194fd1316SSimon Glass node is created with each bootstage id as a child. Each child 308294fd1316SSimon Glass has a 'name' property and either 'mark' containing the 308394fd1316SSimon Glass mark time in microsecond, or 'accum' containing the 308494fd1316SSimon Glass accumulated time for that bootstage id in microseconds. 308594fd1316SSimon Glass For example: 308694fd1316SSimon Glass 308794fd1316SSimon Glass bootstage { 308894fd1316SSimon Glass 154 { 308994fd1316SSimon Glass name = "board_init_f"; 309094fd1316SSimon Glass mark = <3575678>; 309194fd1316SSimon Glass }; 309294fd1316SSimon Glass 170 { 309394fd1316SSimon Glass name = "lcd"; 309494fd1316SSimon Glass accum = <33482>; 309594fd1316SSimon Glass }; 309694fd1316SSimon Glass }; 309794fd1316SSimon Glass 309894fd1316SSimon Glass Code in the Linux kernel can find this in /proc/devicetree. 309994fd1316SSimon Glass 31001372cce2SMarian BalakowiczLegacy uImage format: 31011372cce2SMarian Balakowicz 3102c609719bSwdenk Arg Where When 3103c609719bSwdenk 1 common/cmd_bootm.c before attempting to boot an image 3104c609719bSwdenk -1 common/cmd_bootm.c Image header has bad magic number 3105c609719bSwdenk 2 common/cmd_bootm.c Image header has correct magic number 3106c609719bSwdenk -2 common/cmd_bootm.c Image header has bad checksum 3107c609719bSwdenk 3 common/cmd_bootm.c Image header has correct checksum 3108c609719bSwdenk -3 common/cmd_bootm.c Image data has bad checksum 3109c609719bSwdenk 4 common/cmd_bootm.c Image data has correct checksum 3110c609719bSwdenk -4 common/cmd_bootm.c Image is for unsupported architecture 3111c609719bSwdenk 5 common/cmd_bootm.c Architecture check OK 31121372cce2SMarian Balakowicz -5 common/cmd_bootm.c Wrong Image Type (not kernel, multi) 3113c609719bSwdenk 6 common/cmd_bootm.c Image Type check OK 3114c609719bSwdenk -6 common/cmd_bootm.c gunzip uncompression error 3115c609719bSwdenk -7 common/cmd_bootm.c Unimplemented compression type 3116c609719bSwdenk 7 common/cmd_bootm.c Uncompression OK 31171372cce2SMarian Balakowicz 8 common/cmd_bootm.c No uncompress/copy overwrite error 3118c609719bSwdenk -9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX) 31191372cce2SMarian Balakowicz 31201372cce2SMarian Balakowicz 9 common/image.c Start initial ramdisk verification 31211372cce2SMarian Balakowicz -10 common/image.c Ramdisk header has bad magic number 31221372cce2SMarian Balakowicz -11 common/image.c Ramdisk header has bad checksum 31231372cce2SMarian Balakowicz 10 common/image.c Ramdisk header is OK 31241372cce2SMarian Balakowicz -12 common/image.c Ramdisk data has bad checksum 31251372cce2SMarian Balakowicz 11 common/image.c Ramdisk data has correct checksum 31261372cce2SMarian Balakowicz 12 common/image.c Ramdisk verification complete, start loading 312711ccc33fSMarcel Ziswiler -13 common/image.c Wrong Image Type (not PPC Linux ramdisk) 31281372cce2SMarian Balakowicz 13 common/image.c Start multifile image verification 31291372cce2SMarian Balakowicz 14 common/image.c No initial ramdisk, no multifile, continue. 31301372cce2SMarian Balakowicz 3131ea0364f1SPeter Tyser 15 arch/<arch>/lib/bootm.c All preparation done, transferring control to OS 3132c609719bSwdenk 3133a47a12beSStefan Roese -30 arch/powerpc/lib/board.c Fatal error, hang the system 313463e73c9aSwdenk -31 post/post.c POST test failed, detected by post_output_backlog() 313563e73c9aSwdenk -32 post/post.c POST test failed, detected by post_run_single() 313663e73c9aSwdenk 3137566a494fSHeiko Schocher 34 common/cmd_doc.c before loading a Image from a DOC device 3138566a494fSHeiko Schocher -35 common/cmd_doc.c Bad usage of "doc" command 3139566a494fSHeiko Schocher 35 common/cmd_doc.c correct usage of "doc" command 3140566a494fSHeiko Schocher -36 common/cmd_doc.c No boot device 3141566a494fSHeiko Schocher 36 common/cmd_doc.c correct boot device 3142566a494fSHeiko Schocher -37 common/cmd_doc.c Unknown Chip ID on boot device 3143566a494fSHeiko Schocher 37 common/cmd_doc.c correct chip ID found, device available 3144566a494fSHeiko Schocher -38 common/cmd_doc.c Read Error on boot device 3145566a494fSHeiko Schocher 38 common/cmd_doc.c reading Image header from DOC device OK 3146566a494fSHeiko Schocher -39 common/cmd_doc.c Image header has bad magic number 3147566a494fSHeiko Schocher 39 common/cmd_doc.c Image header has correct magic number 3148566a494fSHeiko Schocher -40 common/cmd_doc.c Error reading Image from DOC device 3149566a494fSHeiko Schocher 40 common/cmd_doc.c Image header has correct magic number 3150566a494fSHeiko Schocher 41 common/cmd_ide.c before loading a Image from a IDE device 3151566a494fSHeiko Schocher -42 common/cmd_ide.c Bad usage of "ide" command 3152566a494fSHeiko Schocher 42 common/cmd_ide.c correct usage of "ide" command 3153566a494fSHeiko Schocher -43 common/cmd_ide.c No boot device 3154566a494fSHeiko Schocher 43 common/cmd_ide.c boot device found 3155566a494fSHeiko Schocher -44 common/cmd_ide.c Device not available 3156566a494fSHeiko Schocher 44 common/cmd_ide.c Device available 3157566a494fSHeiko Schocher -45 common/cmd_ide.c wrong partition selected 3158566a494fSHeiko Schocher 45 common/cmd_ide.c partition selected 3159566a494fSHeiko Schocher -46 common/cmd_ide.c Unknown partition table 3160566a494fSHeiko Schocher 46 common/cmd_ide.c valid partition table found 3161566a494fSHeiko Schocher -47 common/cmd_ide.c Invalid partition type 3162566a494fSHeiko Schocher 47 common/cmd_ide.c correct partition type 3163566a494fSHeiko Schocher -48 common/cmd_ide.c Error reading Image Header on boot device 3164566a494fSHeiko Schocher 48 common/cmd_ide.c reading Image Header from IDE device OK 3165566a494fSHeiko Schocher -49 common/cmd_ide.c Image header has bad magic number 3166566a494fSHeiko Schocher 49 common/cmd_ide.c Image header has correct magic number 3167566a494fSHeiko Schocher -50 common/cmd_ide.c Image header has bad checksum 3168566a494fSHeiko Schocher 50 common/cmd_ide.c Image header has correct checksum 3169566a494fSHeiko Schocher -51 common/cmd_ide.c Error reading Image from IDE device 3170566a494fSHeiko Schocher 51 common/cmd_ide.c reading Image from IDE device OK 3171566a494fSHeiko Schocher 52 common/cmd_nand.c before loading a Image from a NAND device 3172566a494fSHeiko Schocher -53 common/cmd_nand.c Bad usage of "nand" command 3173566a494fSHeiko Schocher 53 common/cmd_nand.c correct usage of "nand" command 3174566a494fSHeiko Schocher -54 common/cmd_nand.c No boot device 3175566a494fSHeiko Schocher 54 common/cmd_nand.c boot device found 3176566a494fSHeiko Schocher -55 common/cmd_nand.c Unknown Chip ID on boot device 3177566a494fSHeiko Schocher 55 common/cmd_nand.c correct chip ID found, device available 3178566a494fSHeiko Schocher -56 common/cmd_nand.c Error reading Image Header on boot device 3179566a494fSHeiko Schocher 56 common/cmd_nand.c reading Image Header from NAND device OK 3180566a494fSHeiko Schocher -57 common/cmd_nand.c Image header has bad magic number 3181566a494fSHeiko Schocher 57 common/cmd_nand.c Image header has correct magic number 3182566a494fSHeiko Schocher -58 common/cmd_nand.c Error reading Image from NAND device 3183566a494fSHeiko Schocher 58 common/cmd_nand.c reading Image from NAND device OK 3184c609719bSwdenk 3185566a494fSHeiko Schocher -60 common/env_common.c Environment has a bad CRC, using default 3186c609719bSwdenk 3187566a494fSHeiko Schocher 64 net/eth.c starting with Ethernet configuration. 3188566a494fSHeiko Schocher -64 net/eth.c no Ethernet found. 3189566a494fSHeiko Schocher 65 net/eth.c Ethernet found. 3190206c60cbSwdenk 3191566a494fSHeiko Schocher -80 common/cmd_net.c usage wrong 3192566a494fSHeiko Schocher 80 common/cmd_net.c before calling NetLoop() 319311ccc33fSMarcel Ziswiler -81 common/cmd_net.c some error in NetLoop() occurred 3194566a494fSHeiko Schocher 81 common/cmd_net.c NetLoop() back without error 3195566a494fSHeiko Schocher -82 common/cmd_net.c size == 0 (File with size 0 loaded) 3196566a494fSHeiko Schocher 82 common/cmd_net.c trying automatic boot 319774de7aefSWolfgang Denk 83 common/cmd_net.c running "source" command 319874de7aefSWolfgang Denk -83 common/cmd_net.c some error in automatic boot or "source" command 3199566a494fSHeiko Schocher 84 common/cmd_net.c end without errors 3200c609719bSwdenk 32011372cce2SMarian BalakowiczFIT uImage format: 32021372cce2SMarian Balakowicz 32031372cce2SMarian Balakowicz Arg Where When 32041372cce2SMarian Balakowicz 100 common/cmd_bootm.c Kernel FIT Image has correct format 32051372cce2SMarian Balakowicz -100 common/cmd_bootm.c Kernel FIT Image has incorrect format 32061372cce2SMarian Balakowicz 101 common/cmd_bootm.c No Kernel subimage unit name, using configuration 32071372cce2SMarian Balakowicz -101 common/cmd_bootm.c Can't get configuration for kernel subimage 32081372cce2SMarian Balakowicz 102 common/cmd_bootm.c Kernel unit name specified 32091372cce2SMarian Balakowicz -103 common/cmd_bootm.c Can't get kernel subimage node offset 3210f773bea8SMarian Balakowicz 103 common/cmd_bootm.c Found configuration node 32111372cce2SMarian Balakowicz 104 common/cmd_bootm.c Got kernel subimage node offset 32121372cce2SMarian Balakowicz -104 common/cmd_bootm.c Kernel subimage hash verification failed 32131372cce2SMarian Balakowicz 105 common/cmd_bootm.c Kernel subimage hash verification OK 32141372cce2SMarian Balakowicz -105 common/cmd_bootm.c Kernel subimage is for unsupported architecture 32151372cce2SMarian Balakowicz 106 common/cmd_bootm.c Architecture check OK 321611ccc33fSMarcel Ziswiler -106 common/cmd_bootm.c Kernel subimage has wrong type 321711ccc33fSMarcel Ziswiler 107 common/cmd_bootm.c Kernel subimage type OK 32181372cce2SMarian Balakowicz -107 common/cmd_bootm.c Can't get kernel subimage data/size 32191372cce2SMarian Balakowicz 108 common/cmd_bootm.c Got kernel subimage data/size 32201372cce2SMarian Balakowicz -108 common/cmd_bootm.c Wrong image type (not legacy, FIT) 32211372cce2SMarian Balakowicz -109 common/cmd_bootm.c Can't get kernel subimage type 32221372cce2SMarian Balakowicz -110 common/cmd_bootm.c Can't get kernel subimage comp 32231372cce2SMarian Balakowicz -111 common/cmd_bootm.c Can't get kernel subimage os 32241372cce2SMarian Balakowicz -112 common/cmd_bootm.c Can't get kernel subimage load address 32251372cce2SMarian Balakowicz -113 common/cmd_bootm.c Image uncompress/copy overwrite error 32261372cce2SMarian Balakowicz 32271372cce2SMarian Balakowicz 120 common/image.c Start initial ramdisk verification 32281372cce2SMarian Balakowicz -120 common/image.c Ramdisk FIT image has incorrect format 32291372cce2SMarian Balakowicz 121 common/image.c Ramdisk FIT image has correct format 323011ccc33fSMarcel Ziswiler 122 common/image.c No ramdisk subimage unit name, using configuration 32311372cce2SMarian Balakowicz -122 common/image.c Can't get configuration for ramdisk subimage 32321372cce2SMarian Balakowicz 123 common/image.c Ramdisk unit name specified 32331372cce2SMarian Balakowicz -124 common/image.c Can't get ramdisk subimage node offset 32341372cce2SMarian Balakowicz 125 common/image.c Got ramdisk subimage node offset 32351372cce2SMarian Balakowicz -125 common/image.c Ramdisk subimage hash verification failed 32361372cce2SMarian Balakowicz 126 common/image.c Ramdisk subimage hash verification OK 32371372cce2SMarian Balakowicz -126 common/image.c Ramdisk subimage for unsupported architecture 32381372cce2SMarian Balakowicz 127 common/image.c Architecture check OK 32391372cce2SMarian Balakowicz -127 common/image.c Can't get ramdisk subimage data/size 32401372cce2SMarian Balakowicz 128 common/image.c Got ramdisk subimage data/size 32411372cce2SMarian Balakowicz 129 common/image.c Can't get ramdisk load address 32421372cce2SMarian Balakowicz -129 common/image.c Got ramdisk load address 32431372cce2SMarian Balakowicz 324411ccc33fSMarcel Ziswiler -130 common/cmd_doc.c Incorrect FIT image format 32451372cce2SMarian Balakowicz 131 common/cmd_doc.c FIT image format OK 32461372cce2SMarian Balakowicz 324711ccc33fSMarcel Ziswiler -140 common/cmd_ide.c Incorrect FIT image format 32481372cce2SMarian Balakowicz 141 common/cmd_ide.c FIT image format OK 32491372cce2SMarian Balakowicz 325011ccc33fSMarcel Ziswiler -150 common/cmd_nand.c Incorrect FIT image format 32511372cce2SMarian Balakowicz 151 common/cmd_nand.c FIT image format OK 32521372cce2SMarian Balakowicz 325321d29f7fSHeiko Schocher- legacy image format: 325421d29f7fSHeiko Schocher CONFIG_IMAGE_FORMAT_LEGACY 325521d29f7fSHeiko Schocher enables the legacy image format support in U-Boot. 325621d29f7fSHeiko Schocher 325721d29f7fSHeiko Schocher Default: 325821d29f7fSHeiko Schocher enabled if CONFIG_FIT_SIGNATURE is not defined. 325921d29f7fSHeiko Schocher 326021d29f7fSHeiko Schocher CONFIG_DISABLE_IMAGE_LEGACY 326121d29f7fSHeiko Schocher disable the legacy image format 326221d29f7fSHeiko Schocher 326321d29f7fSHeiko Schocher This define is introduced, as the legacy image format is 326421d29f7fSHeiko Schocher enabled per default for backward compatibility. 326521d29f7fSHeiko Schocher 3266d95f6ec7SGabe Black- FIT image support: 3267d95f6ec7SGabe Black CONFIG_FIT 3268d95f6ec7SGabe Black Enable support for the FIT uImage format. 3269d95f6ec7SGabe Black 3270d95f6ec7SGabe Black CONFIG_FIT_BEST_MATCH 3271d95f6ec7SGabe Black When no configuration is explicitly selected, default to the 3272d95f6ec7SGabe Black one whose fdt's compatibility field best matches that of 3273d95f6ec7SGabe Black U-Boot itself. A match is considered "best" if it matches the 3274d95f6ec7SGabe Black most specific compatibility entry of U-Boot's fdt's root node. 3275d95f6ec7SGabe Black The order of entries in the configuration's fdt is ignored. 3276d95f6ec7SGabe Black 32773e569a6bSSimon Glass CONFIG_FIT_SIGNATURE 32783e569a6bSSimon Glass This option enables signature verification of FIT uImages, 32793e569a6bSSimon Glass using a hash signed and verified using RSA. See 32803e569a6bSSimon Glass doc/uImage.FIT/signature.txt for more details. 32813e569a6bSSimon Glass 328221d29f7fSHeiko Schocher WARNING: When relying on signed FIT images with required 328321d29f7fSHeiko Schocher signature check the legacy image format is default 328421d29f7fSHeiko Schocher disabled. If a board need legacy image format support 328521d29f7fSHeiko Schocher enable this through CONFIG_IMAGE_FORMAT_LEGACY 328621d29f7fSHeiko Schocher 32879a4f479bSDirk Eibach CONFIG_FIT_DISABLE_SHA256 32889a4f479bSDirk Eibach Supporting SHA256 hashes has quite an impact on binary size. 32899a4f479bSDirk Eibach For constrained systems sha256 hash support can be disabled 32909a4f479bSDirk Eibach with this option. 32919a4f479bSDirk Eibach 32924cf2609bSWolfgang Denk- Standalone program support: 32934cf2609bSWolfgang Denk CONFIG_STANDALONE_LOAD_ADDR 32944cf2609bSWolfgang Denk 32956feff899SWolfgang Denk This option defines a board specific value for the 32966feff899SWolfgang Denk address where standalone program gets loaded, thus 32976feff899SWolfgang Denk overwriting the architecture dependent default 32984cf2609bSWolfgang Denk settings. 32994cf2609bSWolfgang Denk 33004cf2609bSWolfgang Denk- Frame Buffer Address: 33014cf2609bSWolfgang Denk CONFIG_FB_ADDR 33024cf2609bSWolfgang Denk 33034cf2609bSWolfgang Denk Define CONFIG_FB_ADDR if you want to use specific 330444a53b57SWolfgang Denk address for frame buffer. This is typically the case 330544a53b57SWolfgang Denk when using a graphics controller has separate video 330644a53b57SWolfgang Denk memory. U-Boot will then place the frame buffer at 330744a53b57SWolfgang Denk the given address instead of dynamically reserving it 330844a53b57SWolfgang Denk in system RAM by calling lcd_setmem(), which grabs 330944a53b57SWolfgang Denk the memory for the frame buffer depending on the 331044a53b57SWolfgang Denk configured panel size. 33114cf2609bSWolfgang Denk 33124cf2609bSWolfgang Denk Please see board_init_f function. 33134cf2609bSWolfgang Denk 3314cccfc2abSDetlev Zundel- Automatic software updates via TFTP server 3315cccfc2abSDetlev Zundel CONFIG_UPDATE_TFTP 3316cccfc2abSDetlev Zundel CONFIG_UPDATE_TFTP_CNT_MAX 3317cccfc2abSDetlev Zundel CONFIG_UPDATE_TFTP_MSEC_MAX 3318cccfc2abSDetlev Zundel 3319cccfc2abSDetlev Zundel These options enable and control the auto-update feature; 3320cccfc2abSDetlev Zundel for a more detailed description refer to doc/README.update. 3321cccfc2abSDetlev Zundel 3322cccfc2abSDetlev Zundel- MTD Support (mtdparts command, UBI support) 3323cccfc2abSDetlev Zundel CONFIG_MTD_DEVICE 3324cccfc2abSDetlev Zundel 3325cccfc2abSDetlev Zundel Adds the MTD device infrastructure from the Linux kernel. 3326cccfc2abSDetlev Zundel Needed for mtdparts command support. 3327cccfc2abSDetlev Zundel 3328cccfc2abSDetlev Zundel CONFIG_MTD_PARTITIONS 3329cccfc2abSDetlev Zundel 3330cccfc2abSDetlev Zundel Adds the MTD partitioning infrastructure from the Linux 3331cccfc2abSDetlev Zundel kernel. Needed for UBI support. 3332cccfc2abSDetlev Zundel 333370c219cdSJoe Hershberger- UBI support 333470c219cdSJoe Hershberger CONFIG_CMD_UBI 333570c219cdSJoe Hershberger 333670c219cdSJoe Hershberger Adds commands for interacting with MTD partitions formatted 333770c219cdSJoe Hershberger with the UBI flash translation layer 333870c219cdSJoe Hershberger 333970c219cdSJoe Hershberger Requires also defining CONFIG_RBTREE 334070c219cdSJoe Hershberger 3341147162daSJoe Hershberger CONFIG_UBI_SILENCE_MSG 3342147162daSJoe Hershberger 3343147162daSJoe Hershberger Make the verbose messages from UBI stop printing. This leaves 3344147162daSJoe Hershberger warnings and errors enabled. 3345147162daSJoe Hershberger 334670c219cdSJoe Hershberger- UBIFS support 334770c219cdSJoe Hershberger CONFIG_CMD_UBIFS 334870c219cdSJoe Hershberger 334970c219cdSJoe Hershberger Adds commands for interacting with UBI volumes formatted as 335070c219cdSJoe Hershberger UBIFS. UBIFS is read-only in u-boot. 335170c219cdSJoe Hershberger 335270c219cdSJoe Hershberger Requires UBI support as well as CONFIG_LZO 335370c219cdSJoe Hershberger 3354147162daSJoe Hershberger CONFIG_UBIFS_SILENCE_MSG 3355147162daSJoe Hershberger 3356147162daSJoe Hershberger Make the verbose messages from UBIFS stop printing. This leaves 3357147162daSJoe Hershberger warnings and errors enabled. 3358147162daSJoe Hershberger 33596a11cf48SDaniel Schwierzeck- SPL framework 33606a11cf48SDaniel Schwierzeck CONFIG_SPL 33616a11cf48SDaniel Schwierzeck Enable building of SPL globally. 33626a11cf48SDaniel Schwierzeck 336395579793STom Rini CONFIG_SPL_LDSCRIPT 336495579793STom Rini LDSCRIPT for linking the SPL binary. 336595579793STom Rini 33666ebc3461SAlbert ARIBAUD CONFIG_SPL_MAX_FOOTPRINT 33676ebc3461SAlbert ARIBAUD Maximum size in memory allocated to the SPL, BSS included. 33686ebc3461SAlbert ARIBAUD When defined, the linker checks that the actual memory 33696ebc3461SAlbert ARIBAUD used by SPL from _start to __bss_end does not exceed it. 33708960af8bSAlbert ARIBAUD CONFIG_SPL_MAX_FOOTPRINT and CONFIG_SPL_BSS_MAX_SIZE 33716ebc3461SAlbert ARIBAUD must not be both defined at the same time. 33726ebc3461SAlbert ARIBAUD 337395579793STom Rini CONFIG_SPL_MAX_SIZE 33746ebc3461SAlbert ARIBAUD Maximum size of the SPL image (text, data, rodata, and 33756ebc3461SAlbert ARIBAUD linker lists sections), BSS excluded. 33766ebc3461SAlbert ARIBAUD When defined, the linker checks that the actual size does 33776ebc3461SAlbert ARIBAUD not exceed it. 337895579793STom Rini 33796a11cf48SDaniel Schwierzeck CONFIG_SPL_TEXT_BASE 33806a11cf48SDaniel Schwierzeck TEXT_BASE for linking the SPL binary. 33816a11cf48SDaniel Schwierzeck 338294a45bb1SScott Wood CONFIG_SPL_RELOC_TEXT_BASE 338394a45bb1SScott Wood Address to relocate to. If unspecified, this is equal to 338494a45bb1SScott Wood CONFIG_SPL_TEXT_BASE (i.e. no relocation is done). 338594a45bb1SScott Wood 338695579793STom Rini CONFIG_SPL_BSS_START_ADDR 338795579793STom Rini Link address for the BSS within the SPL binary. 338895579793STom Rini 338995579793STom Rini CONFIG_SPL_BSS_MAX_SIZE 33906ebc3461SAlbert ARIBAUD Maximum size in memory allocated to the SPL BSS. 33916ebc3461SAlbert ARIBAUD When defined, the linker checks that the actual memory used 33926ebc3461SAlbert ARIBAUD by SPL from __bss_start to __bss_end does not exceed it. 33938960af8bSAlbert ARIBAUD CONFIG_SPL_MAX_FOOTPRINT and CONFIG_SPL_BSS_MAX_SIZE 33946ebc3461SAlbert ARIBAUD must not be both defined at the same time. 339595579793STom Rini 339695579793STom Rini CONFIG_SPL_STACK 339795579793STom Rini Adress of the start of the stack SPL will use 339895579793STom Rini 339994a45bb1SScott Wood CONFIG_SPL_RELOC_STACK 340094a45bb1SScott Wood Adress of the start of the stack SPL will use after 340194a45bb1SScott Wood relocation. If unspecified, this is equal to 340294a45bb1SScott Wood CONFIG_SPL_STACK. 340394a45bb1SScott Wood 340495579793STom Rini CONFIG_SYS_SPL_MALLOC_START 340595579793STom Rini Starting address of the malloc pool used in SPL. 340695579793STom Rini 340795579793STom Rini CONFIG_SYS_SPL_MALLOC_SIZE 340895579793STom Rini The size of the malloc pool used in SPL. 34096a11cf48SDaniel Schwierzeck 341047f7bcaeSTom Rini CONFIG_SPL_FRAMEWORK 341147f7bcaeSTom Rini Enable the SPL framework under common/. This framework 341247f7bcaeSTom Rini supports MMC, NAND and YMODEM loading of U-Boot and NAND 341347f7bcaeSTom Rini NAND loading of the Linux Kernel. 341447f7bcaeSTom Rini 34159607faf2STom Rini CONFIG_SPL_OS_BOOT 34169607faf2STom Rini Enable booting directly to an OS from SPL. 34179607faf2STom Rini See also: doc/README.falcon 34189607faf2STom Rini 3419861a86f4STom Rini CONFIG_SPL_DISPLAY_PRINT 3420861a86f4STom Rini For ARM, enable an optional function to print more information 3421861a86f4STom Rini about the running system. 3422861a86f4STom Rini 34234b919725SScott Wood CONFIG_SPL_INIT_MINIMAL 34244b919725SScott Wood Arch init code should be built for a very small image 34254b919725SScott Wood 34266a11cf48SDaniel Schwierzeck CONFIG_SPL_LIBCOMMON_SUPPORT 34276a11cf48SDaniel Schwierzeck Support for common/libcommon.o in SPL binary 34286a11cf48SDaniel Schwierzeck 34296a11cf48SDaniel Schwierzeck CONFIG_SPL_LIBDISK_SUPPORT 34306a11cf48SDaniel Schwierzeck Support for disk/libdisk.o in SPL binary 34316a11cf48SDaniel Schwierzeck 34326a11cf48SDaniel Schwierzeck CONFIG_SPL_I2C_SUPPORT 34336a11cf48SDaniel Schwierzeck Support for drivers/i2c/libi2c.o in SPL binary 34346a11cf48SDaniel Schwierzeck 34356a11cf48SDaniel Schwierzeck CONFIG_SPL_GPIO_SUPPORT 34366a11cf48SDaniel Schwierzeck Support for drivers/gpio/libgpio.o in SPL binary 34376a11cf48SDaniel Schwierzeck 34386a11cf48SDaniel Schwierzeck CONFIG_SPL_MMC_SUPPORT 34396a11cf48SDaniel Schwierzeck Support for drivers/mmc/libmmc.o in SPL binary 34406a11cf48SDaniel Schwierzeck 344195579793STom Rini CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR, 344295579793STom Rini CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS, 344395579793STom Rini CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 344495579793STom Rini Address, size and partition on the MMC to load U-Boot from 344595579793STom Rini when the MMC is being used in raw mode. 344695579793STom Rini 34472b75b0adSPeter Korsgaard CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 34482b75b0adSPeter Korsgaard Sector to load kernel uImage from when MMC is being 34492b75b0adSPeter Korsgaard used in raw mode (for Falcon mode) 34502b75b0adSPeter Korsgaard 34512b75b0adSPeter Korsgaard CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR, 34522b75b0adSPeter Korsgaard CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 34532b75b0adSPeter Korsgaard Sector and number of sectors to load kernel argument 34542b75b0adSPeter Korsgaard parameters from when MMC is being used in raw mode 34552b75b0adSPeter Korsgaard (for falcon mode) 34562b75b0adSPeter Korsgaard 345795579793STom Rini CONFIG_SPL_FAT_SUPPORT 345895579793STom Rini Support for fs/fat/libfat.o in SPL binary 345995579793STom Rini 346095579793STom Rini CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME 346195579793STom Rini Filename to read to load U-Boot when reading from FAT 346295579793STom Rini 34637ad2cc79SPeter Korsgaard CONFIG_SPL_FAT_LOAD_KERNEL_NAME 34647ad2cc79SPeter Korsgaard Filename to read to load kernel uImage when reading 34657ad2cc79SPeter Korsgaard from FAT (for Falcon mode) 34667ad2cc79SPeter Korsgaard 34677ad2cc79SPeter Korsgaard CONFIG_SPL_FAT_LOAD_ARGS_NAME 34687ad2cc79SPeter Korsgaard Filename to read to load kernel argument parameters 34697ad2cc79SPeter Korsgaard when reading from FAT (for Falcon mode) 34707ad2cc79SPeter Korsgaard 347106f60ae3SScott Wood CONFIG_SPL_MPC83XX_WAIT_FOR_NAND 347206f60ae3SScott Wood Set this for NAND SPL on PPC mpc83xx targets, so that 347306f60ae3SScott Wood start.S waits for the rest of the SPL to load before 347406f60ae3SScott Wood continuing (the hardware starts execution after just 347506f60ae3SScott Wood loading the first page rather than the full 4K). 347606f60ae3SScott Wood 3477651fcf60SPrabhakar Kushwaha CONFIG_SPL_SKIP_RELOCATE 3478651fcf60SPrabhakar Kushwaha Avoid SPL relocation 3479651fcf60SPrabhakar Kushwaha 34806f2f01b9SScott Wood CONFIG_SPL_NAND_BASE 34816f2f01b9SScott Wood Include nand_base.c in the SPL. Requires 34826f2f01b9SScott Wood CONFIG_SPL_NAND_DRIVERS. 34836f2f01b9SScott Wood 34846f2f01b9SScott Wood CONFIG_SPL_NAND_DRIVERS 34856f2f01b9SScott Wood SPL uses normal NAND drivers, not minimal drivers. 34866f2f01b9SScott Wood 34876f2f01b9SScott Wood CONFIG_SPL_NAND_ECC 34886f2f01b9SScott Wood Include standard software ECC in the SPL 34896f2f01b9SScott Wood 349095579793STom Rini CONFIG_SPL_NAND_SIMPLE 34917d4b7955SScott Wood Support for NAND boot using simple NAND drivers that 34927d4b7955SScott Wood expose the cmd_ctrl() interface. 349395579793STom Rini 34946dd3b566STom Rini CONFIG_SPL_MTD_SUPPORT 34956dd3b566STom Rini Support for the MTD subsystem within SPL. Useful for 34966dd3b566STom Rini environment on NAND support within SPL. 34976dd3b566STom Rini 3498bb0dc108SYing Zhang CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 3499bb0dc108SYing Zhang Set for the SPL on PPC mpc8xxx targets, support for 35005614e71bSYork Sun drivers/ddr/fsl/libddr.o in SPL binary. 3501bb0dc108SYing Zhang 35027c8eea59SYing Zhang CONFIG_SPL_COMMON_INIT_DDR 35037c8eea59SYing Zhang Set for common ddr init with serial presence detect in 35047c8eea59SYing Zhang SPL binary. 35057c8eea59SYing Zhang 350695579793STom Rini CONFIG_SYS_NAND_5_ADDR_CYCLE, CONFIG_SYS_NAND_PAGE_COUNT, 350795579793STom Rini CONFIG_SYS_NAND_PAGE_SIZE, CONFIG_SYS_NAND_OOBSIZE, 350895579793STom Rini CONFIG_SYS_NAND_BLOCK_SIZE, CONFIG_SYS_NAND_BAD_BLOCK_POS, 350995579793STom Rini CONFIG_SYS_NAND_ECCPOS, CONFIG_SYS_NAND_ECCSIZE, 351095579793STom Rini CONFIG_SYS_NAND_ECCBYTES 351195579793STom Rini Defines the size and behavior of the NAND that SPL uses 35127d4b7955SScott Wood to read U-Boot 351395579793STom Rini 3514fbe76ae4SPrabhakar Kushwaha CONFIG_SPL_NAND_BOOT 3515fbe76ae4SPrabhakar Kushwaha Add support NAND boot 3516fbe76ae4SPrabhakar Kushwaha 351795579793STom Rini CONFIG_SYS_NAND_U_BOOT_OFFS 35187d4b7955SScott Wood Location in NAND to read U-Boot from 35197d4b7955SScott Wood 35207d4b7955SScott Wood CONFIG_SYS_NAND_U_BOOT_DST 35217d4b7955SScott Wood Location in memory to load U-Boot to 35227d4b7955SScott Wood 35237d4b7955SScott Wood CONFIG_SYS_NAND_U_BOOT_SIZE 35247d4b7955SScott Wood Size of image to load 352595579793STom Rini 352695579793STom Rini CONFIG_SYS_NAND_U_BOOT_START 35277d4b7955SScott Wood Entry point in loaded image to jump to 352895579793STom Rini 352995579793STom Rini CONFIG_SYS_NAND_HW_ECC_OOBFIRST 353095579793STom Rini Define this if you need to first read the OOB and then the 353195579793STom Rini data. This is used for example on davinci plattforms. 353295579793STom Rini 353395579793STom Rini CONFIG_SPL_OMAP3_ID_NAND 353495579793STom Rini Support for an OMAP3-specific set of functions to return the 353595579793STom Rini ID and MFR of the first attached NAND chip, if present. 353695579793STom Rini 35376a11cf48SDaniel Schwierzeck CONFIG_SPL_SERIAL_SUPPORT 35386a11cf48SDaniel Schwierzeck Support for drivers/serial/libserial.o in SPL binary 35396a11cf48SDaniel Schwierzeck 35406a11cf48SDaniel Schwierzeck CONFIG_SPL_SPI_FLASH_SUPPORT 35416a11cf48SDaniel Schwierzeck Support for drivers/mtd/spi/libspi_flash.o in SPL binary 35426a11cf48SDaniel Schwierzeck 35436a11cf48SDaniel Schwierzeck CONFIG_SPL_SPI_SUPPORT 35446a11cf48SDaniel Schwierzeck Support for drivers/spi/libspi.o in SPL binary 35456a11cf48SDaniel Schwierzeck 3546c57b953dSPavel Machek CONFIG_SPL_RAM_DEVICE 3547c57b953dSPavel Machek Support for running image already present in ram, in SPL binary 3548c57b953dSPavel Machek 35496a11cf48SDaniel Schwierzeck CONFIG_SPL_LIBGENERIC_SUPPORT 35506a11cf48SDaniel Schwierzeck Support for lib/libgeneric.o in SPL binary 35511372cce2SMarian Balakowicz 3552ba1bee43SYing Zhang CONFIG_SPL_ENV_SUPPORT 3553ba1bee43SYing Zhang Support for the environment operating in SPL binary 3554ba1bee43SYing Zhang 3555ba1bee43SYing Zhang CONFIG_SPL_NET_SUPPORT 3556ba1bee43SYing Zhang Support for the net/libnet.o in SPL binary. 3557ba1bee43SYing Zhang It conflicts with SPL env from storage medium specified by 3558ba1bee43SYing Zhang CONFIG_ENV_IS_xxx but CONFIG_ENV_IS_NOWHERE 3559ba1bee43SYing Zhang 356074752baaSScott Wood CONFIG_SPL_PAD_TO 35616113d3f2SBenoît Thébaudeau Image offset to which the SPL should be padded before appending 35626113d3f2SBenoît Thébaudeau the SPL payload. By default, this is defined as 35636113d3f2SBenoît Thébaudeau CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined. 35646113d3f2SBenoît Thébaudeau CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL 35656113d3f2SBenoît Thébaudeau payload without any padding, or >= CONFIG_SPL_MAX_SIZE. 356674752baaSScott Wood 3567ca2fca22SScott Wood CONFIG_SPL_TARGET 3568ca2fca22SScott Wood Final target image containing SPL and payload. Some SPLs 3569ca2fca22SScott Wood use an arch-specific makefile fragment instead, for 3570ca2fca22SScott Wood example if more than one image needs to be produced. 3571ca2fca22SScott Wood 357287ebee39SSimon Glass CONFIG_FIT_SPL_PRINT 357387ebee39SSimon Glass Printing information about a FIT image adds quite a bit of 357487ebee39SSimon Glass code to SPL. So this is normally disabled in SPL. Use this 357587ebee39SSimon Glass option to re-enable it. This will affect the output of the 357687ebee39SSimon Glass bootm command when booting a FIT image. 357787ebee39SSimon Glass 35783aa29de0SYing Zhang- TPL framework 35793aa29de0SYing Zhang CONFIG_TPL 35803aa29de0SYing Zhang Enable building of TPL globally. 35813aa29de0SYing Zhang 35823aa29de0SYing Zhang CONFIG_TPL_PAD_TO 35833aa29de0SYing Zhang Image offset to which the TPL should be padded before appending 35843aa29de0SYing Zhang the TPL payload. By default, this is defined as 35853aa29de0SYing Zhang CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined. 35863aa29de0SYing Zhang CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL 35873aa29de0SYing Zhang payload without any padding, or >= CONFIG_SPL_MAX_SIZE. 35883aa29de0SYing Zhang 3589c609719bSwdenkModem Support: 3590c609719bSwdenk-------------- 3591c609719bSwdenk 3592566e5cf4SWolfgang Denk[so far only for SMDK2400 boards] 3593c609719bSwdenk 359411ccc33fSMarcel Ziswiler- Modem support enable: 3595c609719bSwdenk CONFIG_MODEM_SUPPORT 3596c609719bSwdenk 3597c609719bSwdenk- RTS/CTS Flow control enable: 3598c609719bSwdenk CONFIG_HWFLOW 3599c609719bSwdenk 3600c609719bSwdenk- Modem debug support: 3601c609719bSwdenk CONFIG_MODEM_SUPPORT_DEBUG 3602c609719bSwdenk 3603c609719bSwdenk Enables debugging stuff (char screen[1024], dbg()) 3604c609719bSwdenk for modem support. Useful only with BDI2000. 3605c609719bSwdenk 3606a8c7c708Swdenk- Interrupt support (PPC): 3607a8c7c708Swdenk 3608a8c7c708Swdenk There are common interrupt_init() and timer_interrupt() 3609a8c7c708Swdenk for all PPC archs. interrupt_init() calls interrupt_init_cpu() 361011ccc33fSMarcel Ziswiler for CPU specific initialization. interrupt_init_cpu() 3611a8c7c708Swdenk should set decrementer_count to appropriate value. If 361211ccc33fSMarcel Ziswiler CPU resets decrementer automatically after interrupt 3613a8c7c708Swdenk (ppc4xx) it should set decrementer_count to zero. 361411ccc33fSMarcel Ziswiler timer_interrupt() calls timer_interrupt_cpu() for CPU 3615a8c7c708Swdenk specific handling. If board has watchdog / status_led 3616a8c7c708Swdenk / other_activity_monitor it works automatically from 3617a8c7c708Swdenk general timer_interrupt(). 3618a8c7c708Swdenk 3619c609719bSwdenk- General: 3620c609719bSwdenk 3621c609719bSwdenk In the target system modem support is enabled when a 3622c609719bSwdenk specific key (key combination) is pressed during 3623c609719bSwdenk power-on. Otherwise U-Boot will boot normally 362411ccc33fSMarcel Ziswiler (autoboot). The key_pressed() function is called from 3625c609719bSwdenk board_init(). Currently key_pressed() is a dummy 3626c609719bSwdenk function, returning 1 and thus enabling modem 3627c609719bSwdenk initialization. 3628c609719bSwdenk 3629c609719bSwdenk If there are no modem init strings in the 3630c609719bSwdenk environment, U-Boot proceed to autoboot; the 3631c609719bSwdenk previous output (banner, info printfs) will be 363211ccc33fSMarcel Ziswiler suppressed, though. 3633c609719bSwdenk 3634c609719bSwdenk See also: doc/README.Modem 3635c609719bSwdenk 36369660e442SHelmut RaigerBoard initialization settings: 36379660e442SHelmut Raiger------------------------------ 36389660e442SHelmut Raiger 36399660e442SHelmut RaigerDuring Initialization u-boot calls a number of board specific functions 36409660e442SHelmut Raigerto allow the preparation of board specific prerequisites, e.g. pin setup 36419660e442SHelmut Raigerbefore drivers are initialized. To enable these callbacks the 36429660e442SHelmut Raigerfollowing configuration macros have to be defined. Currently this is 36439660e442SHelmut Raigerarchitecture specific, so please check arch/your_architecture/lib/board.c 36449660e442SHelmut Raigertypically in board_init_f() and board_init_r(). 36459660e442SHelmut Raiger 36469660e442SHelmut Raiger- CONFIG_BOARD_EARLY_INIT_F: Call board_early_init_f() 36479660e442SHelmut Raiger- CONFIG_BOARD_EARLY_INIT_R: Call board_early_init_r() 36489660e442SHelmut Raiger- CONFIG_BOARD_LATE_INIT: Call board_late_init() 36499660e442SHelmut Raiger- CONFIG_BOARD_POSTCLK_INIT: Call board_postclk_init() 3650c609719bSwdenk 3651c609719bSwdenkConfiguration Settings: 3652c609719bSwdenk----------------------- 3653c609719bSwdenk 36544d1fd7f1SYork Sun- CONFIG_SYS_SUPPORT_64BIT_DATA: Defined automatically if compiled as 64-bit. 36554d1fd7f1SYork Sun Optionally it can be defined to support 64-bit memory commands. 36564d1fd7f1SYork Sun 36576d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_LONGHELP: Defined when you want long help messages included; 3658c609719bSwdenk undefine this when you're short of memory. 3659c609719bSwdenk 36602fb2604dSPeter Tyser- CONFIG_SYS_HELP_CMD_WIDTH: Defined when you want to override the default 36612fb2604dSPeter Tyser width of the commands listed in the 'help' command output. 36622fb2604dSPeter Tyser 36636d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PROMPT: This is what U-Boot prints on the console to 3664c609719bSwdenk prompt for user input. 3665c609719bSwdenk 36666d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CBSIZE: Buffer size for input from the Console 3667c609719bSwdenk 36686d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PBSIZE: Buffer size for Console output 3669c609719bSwdenk 36706d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAXARGS: max. Number of arguments accepted for monitor commands 3671c609719bSwdenk 36726d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_BARGSIZE: Buffer size for Boot Arguments which are passed to 3673c609719bSwdenk the application (usually a Linux kernel) when it is 3674c609719bSwdenk booted 3675c609719bSwdenk 36766d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_BAUDRATE_TABLE: 3677c609719bSwdenk List of legal baudrate settings for this board. 3678c609719bSwdenk 36796d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CONSOLE_INFO_QUIET 3680c609719bSwdenk Suppress display of console information at boot. 3681c609719bSwdenk 36826d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CONSOLE_IS_IN_ENV 3683c609719bSwdenk If the board specific function 3684c609719bSwdenk extern int overwrite_console (void); 3685c609719bSwdenk returns 1, the stdin, stderr and stdout are switched to the 3686c609719bSwdenk serial port, else the settings in the environment are used. 3687c609719bSwdenk 36886d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 3689c609719bSwdenk Enable the call to overwrite_console(). 3690c609719bSwdenk 36916d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CONSOLE_ENV_OVERWRITE 3692c609719bSwdenk Enable overwrite of previous console environment settings. 3693c609719bSwdenk 36946d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END: 3695c609719bSwdenk Begin and End addresses of the area used by the 3696c609719bSwdenk simple memory test. 3697c609719bSwdenk 36986d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_ALT_MEMTEST: 3699c609719bSwdenk Enable an alternate, more extensive memory test. 3700c609719bSwdenk 37016d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MEMTEST_SCRATCH: 37025f535fe1Swdenk Scratch address used by the alternate memory test 37035f535fe1Swdenk You only need to set this if address zero isn't writeable 37045f535fe1Swdenk 37056d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MEM_TOP_HIDE (PPC only): 37066d0f6bcfSJean-Christophe PLAGNIOL-VILLARD If CONFIG_SYS_MEM_TOP_HIDE is defined in the board config header, 370714f73ca6SStefan Roese this specified memory area will get subtracted from the top 370811ccc33fSMarcel Ziswiler (end) of RAM and won't get "touched" at all by U-Boot. By 370914f73ca6SStefan Roese fixing up gd->ram_size the Linux kernel should gets passed 371014f73ca6SStefan Roese the now "corrected" memory size and won't touch it either. 371114f73ca6SStefan Roese This should work for arch/ppc and arch/powerpc. Only Linux 37125e12e75dSStefan Roese board ports in arch/powerpc with bootwrapper support that 371314f73ca6SStefan Roese recalculate the memory size from the SDRAM controller setup 37145e12e75dSStefan Roese will have to get fixed in Linux additionally. 371514f73ca6SStefan Roese 371614f73ca6SStefan Roese This option can be used as a workaround for the 440EPx/GRx 371714f73ca6SStefan Roese CHIP 11 errata where the last 256 bytes in SDRAM shouldn't 371814f73ca6SStefan Roese be touched. 371914f73ca6SStefan Roese 372014f73ca6SStefan Roese WARNING: Please make sure that this value is a multiple of 372114f73ca6SStefan Roese the Linux page size (normally 4k). If this is not the case, 372214f73ca6SStefan Roese then the end address of the Linux memory will be located at a 372314f73ca6SStefan Roese non page size aligned address and this could cause major 372414f73ca6SStefan Roese problems. 372514f73ca6SStefan Roese 37266d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_LOADS_BAUD_CHANGE: 3727c609719bSwdenk Enable temporary baudrate change while serial download 3728c609719bSwdenk 37296d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SDRAM_BASE: 3730c609719bSwdenk Physical start address of SDRAM. _Must_ be 0 here. 3731c609719bSwdenk 37326d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MBIO_BASE: 3733c609719bSwdenk Physical start address of Motherboard I/O (if using a 3734c609719bSwdenk Cogent motherboard) 3735c609719bSwdenk 37366d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_BASE: 3737c609719bSwdenk Physical start address of Flash memory. 3738c609719bSwdenk 37396d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MONITOR_BASE: 3740c609719bSwdenk Physical start address of boot monitor code (set by 3741c609719bSwdenk make config files to be same as the text base address 374214d0a02aSWolfgang Denk (CONFIG_SYS_TEXT_BASE) used when linking) - same as 37436d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FLASH_BASE when booting from flash. 3744c609719bSwdenk 37456d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MONITOR_LEN: 37463b57fe0aSwdenk Size of memory reserved for monitor code, used to 37473b57fe0aSwdenk determine _at_compile_time_ (!) if the environment is 37483b57fe0aSwdenk embedded within the U-Boot image, or in a separate 37493b57fe0aSwdenk flash sector. 3750c609719bSwdenk 37516d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MALLOC_LEN: 3752c609719bSwdenk Size of DRAM reserved for malloc() use. 3753c609719bSwdenk 37546d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_BOOTM_LEN: 375515940c9aSStefan Roese Normally compressed uImages are limited to an 375615940c9aSStefan Roese uncompressed size of 8 MBytes. If this is not enough, 37576d0f6bcfSJean-Christophe PLAGNIOL-VILLARD you can define CONFIG_SYS_BOOTM_LEN in your board config file 375815940c9aSStefan Roese to adjust this setting to your needs. 3759c609719bSwdenk 37606d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_BOOTMAPSZ: 3761c609719bSwdenk Maximum size of memory mapped by the startup code of 3762c609719bSwdenk the Linux kernel; all data that must be processed by 37637d721e34SBartlomiej Sieka the Linux kernel (bd_info, boot arguments, FDT blob if 37647d721e34SBartlomiej Sieka used) must be put below this limit, unless "bootm_low" 37651bce2aebSRobert P. J. Day environment variable is defined and non-zero. In such case 37667d721e34SBartlomiej Sieka all data for the Linux kernel must be between "bootm_low" 3767c3624e6eSGrant Likely and "bootm_low" + CONFIG_SYS_BOOTMAPSZ. The environment 3768c3624e6eSGrant Likely variable "bootm_mapsize" will override the value of 3769c3624e6eSGrant Likely CONFIG_SYS_BOOTMAPSZ. If CONFIG_SYS_BOOTMAPSZ is undefined, 3770c3624e6eSGrant Likely then the value in "bootm_size" will be used instead. 3771c609719bSwdenk 3772fca43cc8SJohn Rigby- CONFIG_SYS_BOOT_RAMDISK_HIGH: 3773fca43cc8SJohn Rigby Enable initrd_high functionality. If defined then the 3774fca43cc8SJohn Rigby initrd_high feature is enabled and the bootm ramdisk subcommand 3775fca43cc8SJohn Rigby is enabled. 3776fca43cc8SJohn Rigby 3777fca43cc8SJohn Rigby- CONFIG_SYS_BOOT_GET_CMDLINE: 3778fca43cc8SJohn Rigby Enables allocating and saving kernel cmdline in space between 3779fca43cc8SJohn Rigby "bootm_low" and "bootm_low" + BOOTMAPSZ. 3780fca43cc8SJohn Rigby 3781fca43cc8SJohn Rigby- CONFIG_SYS_BOOT_GET_KBD: 3782fca43cc8SJohn Rigby Enables allocating and saving a kernel copy of the bd_info in 3783fca43cc8SJohn Rigby space between "bootm_low" and "bootm_low" + BOOTMAPSZ. 3784fca43cc8SJohn Rigby 37856d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAX_FLASH_BANKS: 3786c609719bSwdenk Max number of Flash memory banks 3787c609719bSwdenk 37886d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAX_FLASH_SECT: 3789c609719bSwdenk Max number of sectors on a Flash chip 3790c609719bSwdenk 37916d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_ERASE_TOUT: 3792c609719bSwdenk Timeout for Flash erase operations (in ms) 3793c609719bSwdenk 37946d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_WRITE_TOUT: 3795c609719bSwdenk Timeout for Flash write operations (in ms) 3796c609719bSwdenk 37976d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_LOCK_TOUT 37988564acf9Swdenk Timeout for Flash set sector lock bit operation (in ms) 37998564acf9Swdenk 38006d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_UNLOCK_TOUT 38018564acf9Swdenk Timeout for Flash clear lock bits operation (in ms) 38028564acf9Swdenk 38036d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_PROTECTION 38048564acf9Swdenk If defined, hardware flash sectors protection is used 38058564acf9Swdenk instead of U-Boot software protection. 38068564acf9Swdenk 38076d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_DIRECT_FLASH_TFTP: 3808c609719bSwdenk 3809c609719bSwdenk Enable TFTP transfers directly to flash memory; 3810c609719bSwdenk without this option such a download has to be 3811c609719bSwdenk performed in two steps: (1) download to RAM, and (2) 3812c609719bSwdenk copy from RAM to flash. 3813c609719bSwdenk 3814c609719bSwdenk The two-step approach is usually more reliable, since 3815c609719bSwdenk you can check if the download worked before you erase 381611ccc33fSMarcel Ziswiler the flash, but in some situations (when system RAM is 381711ccc33fSMarcel Ziswiler too limited to allow for a temporary copy of the 3818c609719bSwdenk downloaded image) this option may be very useful. 3819c609719bSwdenk 38206d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_CFI: 3821c609719bSwdenk Define if the flash driver uses extra elements in the 38225653fc33Swdenk common flash structure for storing flash geometry. 38235653fc33Swdenk 382400b1883aSJean-Christophe PLAGNIOL-VILLARD- CONFIG_FLASH_CFI_DRIVER 38255653fc33Swdenk This option also enables the building of the cfi_flash driver 38265653fc33Swdenk in the drivers directory 382753cf9435Sstroese 382891809ed5SPiotr Ziecik- CONFIG_FLASH_CFI_MTD 382991809ed5SPiotr Ziecik This option enables the building of the cfi_mtd driver 383091809ed5SPiotr Ziecik in the drivers directory. The driver exports CFI flash 383191809ed5SPiotr Ziecik to the MTD layer. 383291809ed5SPiotr Ziecik 38336d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_USE_BUFFER_WRITE 383496ef831fSGuennadi Liakhovetski Use buffered writes to flash. 383596ef831fSGuennadi Liakhovetski 383696ef831fSGuennadi Liakhovetski- CONFIG_FLASH_SPANSION_S29WS_N 383796ef831fSGuennadi Liakhovetski s29ws-n MirrorBit flash has non-standard addresses for buffered 383896ef831fSGuennadi Liakhovetski write commands. 383996ef831fSGuennadi Liakhovetski 38406d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_QUIET_TEST 38415568e613SStefan Roese If this option is defined, the common CFI flash doesn't 38425568e613SStefan Roese print it's warning upon not recognized FLASH banks. This 38435568e613SStefan Roese is useful, if some of the configured banks are only 38445568e613SStefan Roese optionally available. 38455568e613SStefan Roese 38469a042e9cSJerry Van Baren- CONFIG_FLASH_SHOW_PROGRESS 38479a042e9cSJerry Van Baren If defined (must be an integer), print out countdown 38489a042e9cSJerry Van Baren digits and dots. Recommended value: 45 (9..1) for 80 38499a042e9cSJerry Van Baren column displays, 15 (3..1) for 40 column displays. 38509a042e9cSJerry Van Baren 3851352ef3f1SStefan Roese- CONFIG_FLASH_VERIFY 3852352ef3f1SStefan Roese If defined, the content of the flash (destination) is compared 3853352ef3f1SStefan Roese against the source after the write operation. An error message 3854352ef3f1SStefan Roese will be printed when the contents are not identical. 3855352ef3f1SStefan Roese Please note that this option is useless in nearly all cases, 3856352ef3f1SStefan Roese since such flash programming errors usually are detected earlier 3857352ef3f1SStefan Roese while unprotecting/erasing/programming. Please only enable 3858352ef3f1SStefan Roese this option if you really know what you are doing. 3859352ef3f1SStefan Roese 38606d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_RX_ETH_BUFFER: 386111ccc33fSMarcel Ziswiler Defines the number of Ethernet receive buffers. On some 386211ccc33fSMarcel Ziswiler Ethernet controllers it is recommended to set this value 386353cf9435Sstroese to 8 or even higher (EEPRO100 or 405 EMAC), since all 386453cf9435Sstroese buffers can be full shortly after enabling the interface 386511ccc33fSMarcel Ziswiler on high Ethernet traffic. 386653cf9435Sstroese Defaults to 4 if not defined. 3867c609719bSwdenk 3868ea882bafSWolfgang Denk- CONFIG_ENV_MAX_ENTRIES 3869ea882bafSWolfgang Denk 3870ea882bafSWolfgang Denk Maximum number of entries in the hash table that is used 3871ea882bafSWolfgang Denk internally to store the environment settings. The default 3872ea882bafSWolfgang Denk setting is supposed to be generous and should work in most 3873ea882bafSWolfgang Denk cases. This setting can be used to tune behaviour; see 3874ea882bafSWolfgang Denk lib/hashtable.c for details. 3875ea882bafSWolfgang Denk 38762598090bSJoe Hershberger- CONFIG_ENV_FLAGS_LIST_DEFAULT 38772598090bSJoe Hershberger- CONFIG_ENV_FLAGS_LIST_STATIC 38781bce2aebSRobert P. J. Day Enable validation of the values given to environment variables when 38792598090bSJoe Hershberger calling env set. Variables can be restricted to only decimal, 38802598090bSJoe Hershberger hexadecimal, or boolean. If CONFIG_CMD_NET is also defined, 38812598090bSJoe Hershberger the variables can also be restricted to IP address or MAC address. 38822598090bSJoe Hershberger 38832598090bSJoe Hershberger The format of the list is: 38842598090bSJoe Hershberger type_attribute = [s|d|x|b|i|m] 3885267541f7SJoe Hershberger access_atribute = [a|r|o|c] 3886267541f7SJoe Hershberger attributes = type_attribute[access_atribute] 38872598090bSJoe Hershberger entry = variable_name[:attributes] 38882598090bSJoe Hershberger list = entry[,list] 38892598090bSJoe Hershberger 38902598090bSJoe Hershberger The type attributes are: 38912598090bSJoe Hershberger s - String (default) 38922598090bSJoe Hershberger d - Decimal 38932598090bSJoe Hershberger x - Hexadecimal 38942598090bSJoe Hershberger b - Boolean ([1yYtT|0nNfF]) 38952598090bSJoe Hershberger i - IP address 38962598090bSJoe Hershberger m - MAC address 38972598090bSJoe Hershberger 3898267541f7SJoe Hershberger The access attributes are: 3899267541f7SJoe Hershberger a - Any (default) 3900267541f7SJoe Hershberger r - Read-only 3901267541f7SJoe Hershberger o - Write-once 3902267541f7SJoe Hershberger c - Change-default 3903267541f7SJoe Hershberger 39042598090bSJoe Hershberger - CONFIG_ENV_FLAGS_LIST_DEFAULT 39052598090bSJoe Hershberger Define this to a list (string) to define the ".flags" 39062598090bSJoe Hershberger envirnoment variable in the default or embedded environment. 39072598090bSJoe Hershberger 39082598090bSJoe Hershberger - CONFIG_ENV_FLAGS_LIST_STATIC 39092598090bSJoe Hershberger Define this to a list (string) to define validation that 39102598090bSJoe Hershberger should be done if an entry is not found in the ".flags" 39112598090bSJoe Hershberger environment variable. To override a setting in the static 39122598090bSJoe Hershberger list, simply add an entry for the same variable name to the 39132598090bSJoe Hershberger ".flags" variable. 39142598090bSJoe Hershberger 3915267541f7SJoe Hershberger- CONFIG_ENV_ACCESS_IGNORE_FORCE 3916267541f7SJoe Hershberger If defined, don't allow the -f switch to env set override variable 3917267541f7SJoe Hershberger access flags. 3918267541f7SJoe Hershberger 39195c1a7ea6SSimon Glass- CONFIG_SYS_GENERIC_BOARD 39205c1a7ea6SSimon Glass This selects the architecture-generic board system instead of the 39215c1a7ea6SSimon Glass architecture-specific board files. It is intended to move boards 39225c1a7ea6SSimon Glass to this new framework over time. Defining this will disable the 39235c1a7ea6SSimon Glass arch/foo/lib/board.c file and use common/board_f.c and 39245c1a7ea6SSimon Glass common/board_r.c instead. To use this option your architecture 39255c1a7ea6SSimon Glass must support it (i.e. must define __HAVE_ARCH_GENERIC_BOARD in 39265c1a7ea6SSimon Glass its config.mk file). If you find problems enabling this option on 39275c1a7ea6SSimon Glass your board please report the problem and send patches! 39285c1a7ea6SSimon Glass 39290b1b60c7SLokesh Vutla- CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only) 39300b1b60c7SLokesh Vutla This is set by OMAP boards for the max time that reset should 39310b1b60c7SLokesh Vutla be asserted. See doc/README.omap-reset-time for details on how 39320b1b60c7SLokesh Vutla the value can be calulated on a given board. 3933632efa74SSimon Glass 3934c609719bSwdenkThe following definitions that deal with the placement and management 3935c609719bSwdenkof environment data (variable area); in general, we support the 3936c609719bSwdenkfollowing configurations: 3937c609719bSwdenk 3938c3eb3fe4SMike Frysinger- CONFIG_BUILD_ENVCRC: 3939c3eb3fe4SMike Frysinger 3940c3eb3fe4SMike Frysinger Builds up envcrc with the target environment so that external utils 3941c3eb3fe4SMike Frysinger may easily extract it and embed it in final U-Boot images. 3942c3eb3fe4SMike Frysinger 39435a1aceb0SJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_FLASH: 3944c609719bSwdenk 3945c609719bSwdenk Define this if the environment is in flash memory. 3946c609719bSwdenk 3947c609719bSwdenk a) The environment occupies one whole flash sector, which is 3948c609719bSwdenk "embedded" in the text segment with the U-Boot code. This 3949c609719bSwdenk happens usually with "bottom boot sector" or "top boot 3950c609719bSwdenk sector" type flash chips, which have several smaller 3951c609719bSwdenk sectors at the start or the end. For instance, such a 3952c609719bSwdenk layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In 3953c609719bSwdenk such a case you would place the environment in one of the 3954c609719bSwdenk 4 kB sectors - with U-Boot code before and after it. With 3955c609719bSwdenk "top boot sector" type flash chips, you would put the 3956c609719bSwdenk environment in one of the last sectors, leaving a gap 3957c609719bSwdenk between U-Boot and the environment. 3958c609719bSwdenk 39590e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_OFFSET: 3960c609719bSwdenk 3961c609719bSwdenk Offset of environment data (variable area) to the 3962c609719bSwdenk beginning of flash memory; for instance, with bottom boot 3963c609719bSwdenk type flash chips the second sector can be used: the offset 3964c609719bSwdenk for this sector is given here. 3965c609719bSwdenk 39666d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE. 3967c609719bSwdenk 39680e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_ADDR: 3969c609719bSwdenk 3970c609719bSwdenk This is just another way to specify the start address of 3971c609719bSwdenk the flash sector containing the environment (instead of 39720e8d1586SJean-Christophe PLAGNIOL-VILLARD CONFIG_ENV_OFFSET). 3973c609719bSwdenk 39740e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SECT_SIZE: 3975c609719bSwdenk 3976c609719bSwdenk Size of the sector containing the environment. 3977c609719bSwdenk 3978c609719bSwdenk 3979c609719bSwdenk b) Sometimes flash chips have few, equal sized, BIG sectors. 3980c609719bSwdenk In such a case you don't want to spend a whole sector for 3981c609719bSwdenk the environment. 3982c609719bSwdenk 39830e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SIZE: 3984c609719bSwdenk 39855a1aceb0SJean-Christophe PLAGNIOL-VILLARD If you use this in combination with CONFIG_ENV_IS_IN_FLASH 39860e8d1586SJean-Christophe PLAGNIOL-VILLARD and CONFIG_ENV_SECT_SIZE, you can specify to use only a part 3987c609719bSwdenk of this flash sector for the environment. This saves 3988c609719bSwdenk memory for the RAM copy of the environment. 3989c609719bSwdenk 3990c609719bSwdenk It may also save flash memory if you decide to use this 3991c609719bSwdenk when your environment is "embedded" within U-Boot code, 3992c609719bSwdenk since then the remainder of the flash sector could be used 3993c609719bSwdenk for U-Boot code. It should be pointed out that this is 3994c609719bSwdenk STRONGLY DISCOURAGED from a robustness point of view: 3995c609719bSwdenk updating the environment in flash makes it always 3996c609719bSwdenk necessary to erase the WHOLE sector. If something goes 3997c609719bSwdenk wrong before the contents has been restored from a copy in 3998c609719bSwdenk RAM, your target system will be dead. 3999c609719bSwdenk 40000e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_ADDR_REDUND 40010e8d1586SJean-Christophe PLAGNIOL-VILLARD CONFIG_ENV_SIZE_REDUND 4002c609719bSwdenk 4003c609719bSwdenk These settings describe a second storage area used to hold 400411ccc33fSMarcel Ziswiler a redundant copy of the environment data, so that there is 40053e38691eSwdenk a valid backup copy in case there is a power failure during 4006c609719bSwdenk a "saveenv" operation. 4007c609719bSwdenk 4008c609719bSwdenkBE CAREFUL! Any changes to the flash layout, and some changes to the 4009c609719bSwdenksource code will make it necessary to adapt <board>/u-boot.lds* 4010c609719bSwdenkaccordingly! 4011c609719bSwdenk 4012c609719bSwdenk 40139314cee6SJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_NVRAM: 4014c609719bSwdenk 4015c609719bSwdenk Define this if you have some non-volatile memory device 4016c609719bSwdenk (NVRAM, battery buffered SRAM) which you want to use for the 4017c609719bSwdenk environment. 4018c609719bSwdenk 40190e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_ADDR: 40200e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SIZE: 4021c609719bSwdenk 402211ccc33fSMarcel Ziswiler These two #defines are used to determine the memory area you 4023c609719bSwdenk want to use for environment. It is assumed that this memory 4024c609719bSwdenk can just be read and written to, without any special 4025c609719bSwdenk provision. 4026c609719bSwdenk 4027c609719bSwdenkBE CAREFUL! The first access to the environment happens quite early 4028c609719bSwdenkin U-Boot initalization (when we try to get the setting of for the 402911ccc33fSMarcel Ziswilerconsole baudrate). You *MUST* have mapped your NVRAM area then, or 4030c609719bSwdenkU-Boot will hang. 4031c609719bSwdenk 4032c609719bSwdenkPlease note that even with NVRAM we still use a copy of the 4033c609719bSwdenkenvironment in RAM: we could work on NVRAM directly, but we want to 4034c609719bSwdenkkeep settings there always unmodified except somebody uses "saveenv" 4035c609719bSwdenkto save the current settings. 4036c609719bSwdenk 4037c609719bSwdenk 4038bb1f8b4fSJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_EEPROM: 4039c609719bSwdenk 4040c609719bSwdenk Use this if you have an EEPROM or similar serial access 4041c609719bSwdenk device and a driver for it. 4042c609719bSwdenk 40430e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_OFFSET: 40440e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SIZE: 4045c609719bSwdenk 4046c609719bSwdenk These two #defines specify the offset and size of the 4047c609719bSwdenk environment area within the total memory of your EEPROM. 4048c609719bSwdenk 40496d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_I2C_EEPROM_ADDR: 4050c609719bSwdenk If defined, specified the chip address of the EEPROM device. 4051c609719bSwdenk The default address is zero. 4052c609719bSwdenk 40536d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_EEPROM_PAGE_WRITE_BITS: 4054c609719bSwdenk If defined, the number of bits used to address bytes in a 4055c609719bSwdenk single page in the EEPROM device. A 64 byte page, for example 4056c609719bSwdenk would require six bits. 4057c609719bSwdenk 40586d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS: 4059c609719bSwdenk If defined, the number of milliseconds to delay between 4060c609719bSwdenk page writes. The default is zero milliseconds. 4061c609719bSwdenk 40626d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_I2C_EEPROM_ADDR_LEN: 4063c609719bSwdenk The length in bytes of the EEPROM memory array address. Note 4064c609719bSwdenk that this is NOT the chip address length! 4065c609719bSwdenk 40666d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW: 40675cf91d6bSwdenk EEPROM chips that implement "address overflow" are ones 40685cf91d6bSwdenk like Catalyst 24WC04/08/16 which has 9/10/11 bits of 40695cf91d6bSwdenk address and the extra bits end up in the "chip address" bit 40705cf91d6bSwdenk slots. This makes a 24WC08 (1Kbyte) chip look like four 256 40715cf91d6bSwdenk byte chips. 40725cf91d6bSwdenk 40735cf91d6bSwdenk Note that we consider the length of the address field to 40745cf91d6bSwdenk still be one byte because the extra address bits are hidden 40755cf91d6bSwdenk in the chip address. 40765cf91d6bSwdenk 40776d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_EEPROM_SIZE: 4078c609719bSwdenk The size in bytes of the EEPROM device. 4079c609719bSwdenk 4080548738b4SHeiko Schocher - CONFIG_ENV_EEPROM_IS_ON_I2C 4081548738b4SHeiko Schocher define this, if you have I2C and SPI activated, and your 4082548738b4SHeiko Schocher EEPROM, which holds the environment, is on the I2C bus. 4083548738b4SHeiko Schocher 4084548738b4SHeiko Schocher - CONFIG_I2C_ENV_EEPROM_BUS 4085548738b4SHeiko Schocher if you have an Environment on an EEPROM reached over 4086548738b4SHeiko Schocher I2C muxes, you can define here, how to reach this 4087548738b4SHeiko Schocher EEPROM. For example: 4088548738b4SHeiko Schocher 4089ea818dbbSHeiko Schocher #define CONFIG_I2C_ENV_EEPROM_BUS 1 4090548738b4SHeiko Schocher 4091548738b4SHeiko Schocher EEPROM which holds the environment, is reached over 4092548738b4SHeiko Schocher a pca9547 i2c mux with address 0x70, channel 3. 4093c609719bSwdenk 4094057c849cSJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_DATAFLASH: 40955779d8d9Swdenk 40965779d8d9Swdenk Define this if you have a DataFlash memory device which you 40975779d8d9Swdenk want to use for the environment. 40985779d8d9Swdenk 40990e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_OFFSET: 41000e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_ADDR: 41010e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SIZE: 41025779d8d9Swdenk 41035779d8d9Swdenk These three #defines specify the offset and size of the 41045779d8d9Swdenk environment area within the total memory of your DataFlash placed 41055779d8d9Swdenk at the specified address. 41065779d8d9Swdenk 4107bd83b592SWu, Josh- CONFIG_ENV_IS_IN_SPI_FLASH: 4108bd83b592SWu, Josh 4109bd83b592SWu, Josh Define this if you have a SPI Flash memory device which you 4110bd83b592SWu, Josh want to use for the environment. 4111bd83b592SWu, Josh 4112bd83b592SWu, Josh - CONFIG_ENV_OFFSET: 4113bd83b592SWu, Josh - CONFIG_ENV_SIZE: 4114bd83b592SWu, Josh 4115bd83b592SWu, Josh These two #defines specify the offset and size of the 4116bd83b592SWu, Josh environment area within the SPI Flash. CONFIG_ENV_OFFSET must be 4117bd83b592SWu, Josh aligned to an erase sector boundary. 4118bd83b592SWu, Josh 4119bd83b592SWu, Josh - CONFIG_ENV_SECT_SIZE: 4120bd83b592SWu, Josh 4121bd83b592SWu, Josh Define the SPI flash's sector size. 4122bd83b592SWu, Josh 4123bd83b592SWu, Josh - CONFIG_ENV_OFFSET_REDUND (optional): 4124bd83b592SWu, Josh 4125bd83b592SWu, Josh This setting describes a second storage area of CONFIG_ENV_SIZE 4126bd83b592SWu, Josh size used to hold a redundant copy of the environment data, so 4127bd83b592SWu, Josh that there is a valid backup copy in case there is a power failure 4128bd83b592SWu, Josh during a "saveenv" operation. CONFIG_ENV_OFFSET_RENDUND must be 4129bd83b592SWu, Josh aligned to an erase sector boundary. 4130bd83b592SWu, Josh 4131bd83b592SWu, Josh - CONFIG_ENV_SPI_BUS (optional): 4132bd83b592SWu, Josh - CONFIG_ENV_SPI_CS (optional): 4133bd83b592SWu, Josh 4134bd83b592SWu, Josh Define the SPI bus and chip select. If not defined they will be 0. 4135bd83b592SWu, Josh 4136bd83b592SWu, Josh - CONFIG_ENV_SPI_MAX_HZ (optional): 4137bd83b592SWu, Josh 4138bd83b592SWu, Josh Define the SPI max work clock. If not defined then use 1MHz. 4139bd83b592SWu, Josh 4140bd83b592SWu, Josh - CONFIG_ENV_SPI_MODE (optional): 4141bd83b592SWu, Josh 4142bd83b592SWu, Josh Define the SPI work mode. If not defined then use SPI_MODE_3. 4143bd83b592SWu, Josh 41440a85a9e7SLiu Gang- CONFIG_ENV_IS_IN_REMOTE: 41450a85a9e7SLiu Gang 41460a85a9e7SLiu Gang Define this if you have a remote memory space which you 41470a85a9e7SLiu Gang want to use for the local device's environment. 41480a85a9e7SLiu Gang 41490a85a9e7SLiu Gang - CONFIG_ENV_ADDR: 41500a85a9e7SLiu Gang - CONFIG_ENV_SIZE: 41510a85a9e7SLiu Gang 41520a85a9e7SLiu Gang These two #defines specify the address and size of the 41530a85a9e7SLiu Gang environment area within the remote memory space. The 41540a85a9e7SLiu Gang local device can get the environment from remote memory 4155fc54c7faSLiu Gang space by SRIO or PCIE links. 41560a85a9e7SLiu Gang 41570a85a9e7SLiu GangBE CAREFUL! For some special cases, the local device can not use 41580a85a9e7SLiu Gang"saveenv" command. For example, the local device will get the 4159fc54c7faSLiu Gangenvironment stored in a remote NOR flash by SRIO or PCIE link, 4160fc54c7faSLiu Gangbut it can not erase, write this NOR flash by SRIO or PCIE interface. 41610a85a9e7SLiu Gang 416251bfee19SJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_NAND: 416313a5695bSwdenk 416413a5695bSwdenk Define this if you have a NAND device which you want to use 416513a5695bSwdenk for the environment. 416613a5695bSwdenk 41670e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_OFFSET: 41680e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SIZE: 416913a5695bSwdenk 417013a5695bSwdenk These two #defines specify the offset and size of the environment 4171fdd813deSScott Wood area within the first NAND device. CONFIG_ENV_OFFSET must be 4172fdd813deSScott Wood aligned to an erase block boundary. 41735779d8d9Swdenk 4174fdd813deSScott Wood - CONFIG_ENV_OFFSET_REDUND (optional): 4175e443c944SMarkus Klotzbuecher 41760e8d1586SJean-Christophe PLAGNIOL-VILLARD This setting describes a second storage area of CONFIG_ENV_SIZE 4177fdd813deSScott Wood size used to hold a redundant copy of the environment data, so 4178fdd813deSScott Wood that there is a valid backup copy in case there is a power failure 4179fdd813deSScott Wood during a "saveenv" operation. CONFIG_ENV_OFFSET_RENDUND must be 4180fdd813deSScott Wood aligned to an erase block boundary. 4181e443c944SMarkus Klotzbuecher 4182fdd813deSScott Wood - CONFIG_ENV_RANGE (optional): 4183fdd813deSScott Wood 4184fdd813deSScott Wood Specifies the length of the region in which the environment 4185fdd813deSScott Wood can be written. This should be a multiple of the NAND device's 4186fdd813deSScott Wood block size. Specifying a range with more erase blocks than 4187fdd813deSScott Wood are needed to hold CONFIG_ENV_SIZE allows bad blocks within 4188fdd813deSScott Wood the range to be avoided. 4189fdd813deSScott Wood 4190fdd813deSScott Wood - CONFIG_ENV_OFFSET_OOB (optional): 4191fdd813deSScott Wood 4192fdd813deSScott Wood Enables support for dynamically retrieving the offset of the 4193fdd813deSScott Wood environment from block zero's out-of-band data. The 4194fdd813deSScott Wood "nand env.oob" command can be used to record this offset. 4195fdd813deSScott Wood Currently, CONFIG_ENV_OFFSET_REDUND is not supported when 4196fdd813deSScott Wood using CONFIG_ENV_OFFSET_OOB. 4197e443c944SMarkus Klotzbuecher 4198b74ab737SGuennadi Liakhovetski- CONFIG_NAND_ENV_DST 4199b74ab737SGuennadi Liakhovetski 4200b74ab737SGuennadi Liakhovetski Defines address in RAM to which the nand_spl code should copy the 4201b74ab737SGuennadi Liakhovetski environment. If redundant environment is used, it will be copied to 4202b74ab737SGuennadi Liakhovetski CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE. 4203b74ab737SGuennadi Liakhovetski 42042b74433fSJoe Hershberger- CONFIG_ENV_IS_IN_UBI: 42052b74433fSJoe Hershberger 42062b74433fSJoe Hershberger Define this if you have an UBI volume that you want to use for the 42072b74433fSJoe Hershberger environment. This has the benefit of wear-leveling the environment 42082b74433fSJoe Hershberger accesses, which is important on NAND. 42092b74433fSJoe Hershberger 42102b74433fSJoe Hershberger - CONFIG_ENV_UBI_PART: 42112b74433fSJoe Hershberger 42122b74433fSJoe Hershberger Define this to a string that is the mtd partition containing the UBI. 42132b74433fSJoe Hershberger 42142b74433fSJoe Hershberger - CONFIG_ENV_UBI_VOLUME: 42152b74433fSJoe Hershberger 42162b74433fSJoe Hershberger Define this to the name of the volume that you want to store the 42172b74433fSJoe Hershberger environment in. 42182b74433fSJoe Hershberger 4219785881f7SJoe Hershberger - CONFIG_ENV_UBI_VOLUME_REDUND: 4220785881f7SJoe Hershberger 4221785881f7SJoe Hershberger Define this to the name of another volume to store a second copy of 4222785881f7SJoe Hershberger the environment in. This will enable redundant environments in UBI. 4223785881f7SJoe Hershberger It is assumed that both volumes are in the same MTD partition. 4224785881f7SJoe Hershberger 42252b74433fSJoe Hershberger - CONFIG_UBI_SILENCE_MSG 42262b74433fSJoe Hershberger - CONFIG_UBIFS_SILENCE_MSG 42272b74433fSJoe Hershberger 42282b74433fSJoe Hershberger You will probably want to define these to avoid a really noisy system 42292b74433fSJoe Hershberger when storing the env in UBI. 42302b74433fSJoe Hershberger 4231d1db76f1SWu, Josh- CONFIG_ENV_IS_IN_FAT: 4232d1db76f1SWu, Josh Define this if you want to use the FAT file system for the environment. 4233d1db76f1SWu, Josh 4234d1db76f1SWu, Josh - FAT_ENV_INTERFACE: 4235d1db76f1SWu, Josh 4236d1db76f1SWu, Josh Define this to a string that is the name of the block device. 4237d1db76f1SWu, Josh 4238d1db76f1SWu, Josh - FAT_ENV_DEV_AND_PART: 4239d1db76f1SWu, Josh 4240d1db76f1SWu, Josh Define this to a string to specify the partition of the device. It can 4241d1db76f1SWu, Josh be as following: 4242d1db76f1SWu, Josh 4243d1db76f1SWu, Josh "D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1) 4244d1db76f1SWu, Josh - "D:P": device D partition P. Error occurs if device D has no 4245d1db76f1SWu, Josh partition table. 4246d1db76f1SWu, Josh - "D:0": device D. 4247d1db76f1SWu, Josh - "D" or "D:": device D partition 1 if device D has partition 4248d1db76f1SWu, Josh table, or the whole device D if has no partition 4249d1db76f1SWu, Josh table. 4250d1db76f1SWu, Josh - "D:auto": first partition in device D with bootable flag set. 4251d1db76f1SWu, Josh If none, first valid paratition in device D. If no 4252d1db76f1SWu, Josh partition table then means device D. 4253d1db76f1SWu, Josh 4254d1db76f1SWu, Josh - FAT_ENV_FILE: 4255d1db76f1SWu, Josh 4256d1db76f1SWu, Josh It's a string of the FAT file name. This file use to store the 4257d1db76f1SWu, Josh envrionment. 4258d1db76f1SWu, Josh 4259d1db76f1SWu, Josh - CONFIG_FAT_WRITE: 4260d1db76f1SWu, Josh This should be defined. Otherwise it cannot save the envrionment file. 4261d1db76f1SWu, Josh 426206e4ae5fSStephen Warren- CONFIG_ENV_IS_IN_MMC: 426306e4ae5fSStephen Warren 426406e4ae5fSStephen Warren Define this if you have an MMC device which you want to use for the 426506e4ae5fSStephen Warren environment. 426606e4ae5fSStephen Warren 426706e4ae5fSStephen Warren - CONFIG_SYS_MMC_ENV_DEV: 426806e4ae5fSStephen Warren 426906e4ae5fSStephen Warren Specifies which MMC device the environment is stored in. 427006e4ae5fSStephen Warren 427106e4ae5fSStephen Warren - CONFIG_SYS_MMC_ENV_PART (optional): 427206e4ae5fSStephen Warren 427306e4ae5fSStephen Warren Specifies which MMC partition the environment is stored in. If not 427406e4ae5fSStephen Warren set, defaults to partition 0, the user area. Common values might be 427506e4ae5fSStephen Warren 1 (first MMC boot partition), 2 (second MMC boot partition). 427606e4ae5fSStephen Warren 427706e4ae5fSStephen Warren - CONFIG_ENV_OFFSET: 427806e4ae5fSStephen Warren - CONFIG_ENV_SIZE: 427906e4ae5fSStephen Warren 428006e4ae5fSStephen Warren These two #defines specify the offset and size of the environment 428106e4ae5fSStephen Warren area within the specified MMC device. 428206e4ae5fSStephen Warren 42835c088ee8SStephen Warren If offset is positive (the usual case), it is treated as relative to 42845c088ee8SStephen Warren the start of the MMC partition. If offset is negative, it is treated 42855c088ee8SStephen Warren as relative to the end of the MMC partition. This can be useful if 42865c088ee8SStephen Warren your board may be fitted with different MMC devices, which have 42875c088ee8SStephen Warren different sizes for the MMC partitions, and you always want the 42885c088ee8SStephen Warren environment placed at the very end of the partition, to leave the 42895c088ee8SStephen Warren maximum possible space before it, to store other data. 42905c088ee8SStephen Warren 429106e4ae5fSStephen Warren These two values are in units of bytes, but must be aligned to an 429206e4ae5fSStephen Warren MMC sector boundary. 429306e4ae5fSStephen Warren 429406e4ae5fSStephen Warren - CONFIG_ENV_OFFSET_REDUND (optional): 429506e4ae5fSStephen Warren 429606e4ae5fSStephen Warren Specifies a second storage area, of CONFIG_ENV_SIZE size, used to 429706e4ae5fSStephen Warren hold a redundant copy of the environment data. This provides a 429806e4ae5fSStephen Warren valid backup copy in case the other copy is corrupted, e.g. due 429906e4ae5fSStephen Warren to a power failure during a "saveenv" operation. 430006e4ae5fSStephen Warren 43015c088ee8SStephen Warren This value may also be positive or negative; this is handled in the 43025c088ee8SStephen Warren same way as CONFIG_ENV_OFFSET. 43035c088ee8SStephen Warren 430406e4ae5fSStephen Warren This value is also in units of bytes, but must also be aligned to 430506e4ae5fSStephen Warren an MMC sector boundary. 430606e4ae5fSStephen Warren 430706e4ae5fSStephen Warren - CONFIG_ENV_SIZE_REDUND (optional): 430806e4ae5fSStephen Warren 430906e4ae5fSStephen Warren This value need not be set, even when CONFIG_ENV_OFFSET_REDUND is 431006e4ae5fSStephen Warren set. If this value is set, it must be set to the same value as 431106e4ae5fSStephen Warren CONFIG_ENV_SIZE. 431206e4ae5fSStephen Warren 43136d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SPI_INIT_OFFSET 4314c609719bSwdenk 4315c609719bSwdenk Defines offset to the initial SPI buffer area in DPRAM. The 4316c609719bSwdenk area is used at an early stage (ROM part) if the environment 4317c609719bSwdenk is configured to reside in the SPI EEPROM: We need a 520 byte 4318c609719bSwdenk scratch DPRAM area. It is used between the two initialization 4319c609719bSwdenk calls (spi_init_f() and spi_init_r()). A value of 0xB00 seems 4320c609719bSwdenk to be a good choice since it makes it far enough from the 4321c609719bSwdenk start of the data area as well as from the stack pointer. 4322c609719bSwdenk 4323e881cb56SBruce AdlerPlease note that the environment is read-only until the monitor 4324c609719bSwdenkhas been relocated to RAM and a RAM copy of the environment has been 4325cdb74977SWolfgang Denkcreated; also, when using EEPROM you will have to use getenv_f() 4326c609719bSwdenkuntil then to read environment variables. 4327c609719bSwdenk 432885ec0bccSwdenkThe environment is protected by a CRC32 checksum. Before the monitor 432985ec0bccSwdenkis relocated into RAM, as a result of a bad CRC you will be working 433085ec0bccSwdenkwith the compiled-in default environment - *silently*!!! [This is 433185ec0bccSwdenknecessary, because the first environment variable we need is the 433285ec0bccSwdenk"baudrate" setting for the console - if we have a bad CRC, we don't 433385ec0bccSwdenkhave any device yet where we could complain.] 4334c609719bSwdenk 4335c609719bSwdenkNote: once the monitor has been relocated, then it will complain if 4336c609719bSwdenkthe default environment is used; a new CRC is computed as soon as you 433785ec0bccSwdenkuse the "saveenv" command to store a valid environment. 4338c609719bSwdenk 43396d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FAULT_ECHO_LINK_DOWN: 4340fc3e2165Swdenk Echo the inverted Ethernet link state to the fault LED. 4341fc3e2165Swdenk 43426d0f6bcfSJean-Christophe PLAGNIOL-VILLARD Note: If this option is active, then CONFIG_SYS_FAULT_MII_ADDR 4343fc3e2165Swdenk also needs to be defined. 4344fc3e2165Swdenk 43456d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FAULT_MII_ADDR: 4346fc3e2165Swdenk MII address of the PHY to check for the Ethernet link state. 4347c609719bSwdenk 4348f5675aa5SRon Madrid- CONFIG_NS16550_MIN_FUNCTIONS: 4349f5675aa5SRon Madrid Define this if you desire to only have use of the NS16550_init 4350f5675aa5SRon Madrid and NS16550_putc functions for the serial driver located at 4351f5675aa5SRon Madrid drivers/serial/ns16550.c. This option is useful for saving 4352f5675aa5SRon Madrid space for already greatly restricted images, including but not 4353f5675aa5SRon Madrid limited to NAND_SPL configurations. 4354f5675aa5SRon Madrid 4355b2b92f53SSimon Glass- CONFIG_DISPLAY_BOARDINFO 4356b2b92f53SSimon Glass Display information about the board that U-Boot is running on 4357b2b92f53SSimon Glass when U-Boot starts up. The board function checkboard() is called 4358b2b92f53SSimon Glass to do this. 4359b2b92f53SSimon Glass 4360e2e3e2b1SSimon Glass- CONFIG_DISPLAY_BOARDINFO_LATE 4361e2e3e2b1SSimon Glass Similar to the previous option, but display this information 4362e2e3e2b1SSimon Glass later, once stdio is running and output goes to the LCD, if 4363e2e3e2b1SSimon Glass present. 4364e2e3e2b1SSimon Glass 4365c609719bSwdenkLow Level (hardware related) configuration options: 4366dc7c9a1aSwdenk--------------------------------------------------- 4367c609719bSwdenk 43686d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CACHELINE_SIZE: 4369c609719bSwdenk Cache Line Size of the CPU. 4370c609719bSwdenk 43716d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_DEFAULT_IMMR: 4372c609719bSwdenk Default address of the IMMR after system reset. 43732535d602Swdenk 43742535d602Swdenk Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU, 43752535d602Swdenk and RPXsuper) to be able to adjust the position of 43762535d602Swdenk the IMMR register after a reset. 4377c609719bSwdenk 4378e46fedfeSTimur Tabi- CONFIG_SYS_CCSRBAR_DEFAULT: 4379e46fedfeSTimur Tabi Default (power-on reset) physical address of CCSR on Freescale 4380e46fedfeSTimur Tabi PowerPC SOCs. 4381e46fedfeSTimur Tabi 4382e46fedfeSTimur Tabi- CONFIG_SYS_CCSRBAR: 4383e46fedfeSTimur Tabi Virtual address of CCSR. On a 32-bit build, this is typically 4384e46fedfeSTimur Tabi the same value as CONFIG_SYS_CCSRBAR_DEFAULT. 4385e46fedfeSTimur Tabi 4386e46fedfeSTimur Tabi CONFIG_SYS_DEFAULT_IMMR must also be set to this value, 4387e46fedfeSTimur Tabi for cross-platform code that uses that macro instead. 4388e46fedfeSTimur Tabi 4389e46fedfeSTimur Tabi- CONFIG_SYS_CCSRBAR_PHYS: 4390e46fedfeSTimur Tabi Physical address of CCSR. CCSR can be relocated to a new 4391e46fedfeSTimur Tabi physical address, if desired. In this case, this macro should 4392e46fedfeSTimur Tabi be set to that address. Otherwise, it should be set to the 4393e46fedfeSTimur Tabi same value as CONFIG_SYS_CCSRBAR_DEFAULT. For example, CCSR 4394e46fedfeSTimur Tabi is typically relocated on 36-bit builds. It is recommended 4395e46fedfeSTimur Tabi that this macro be defined via the _HIGH and _LOW macros: 4396e46fedfeSTimur Tabi 4397e46fedfeSTimur Tabi #define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH 4398e46fedfeSTimur Tabi * 1ull) << 32 | CONFIG_SYS_CCSRBAR_PHYS_LOW) 4399e46fedfeSTimur Tabi 4400e46fedfeSTimur Tabi- CONFIG_SYS_CCSRBAR_PHYS_HIGH: 4401e46fedfeSTimur Tabi Bits 33-36 of CONFIG_SYS_CCSRBAR_PHYS. This value is typically 4402e46fedfeSTimur Tabi either 0 (32-bit build) or 0xF (36-bit build). This macro is 4403e46fedfeSTimur Tabi used in assembly code, so it must not contain typecasts or 4404e46fedfeSTimur Tabi integer size suffixes (e.g. "ULL"). 4405e46fedfeSTimur Tabi 4406e46fedfeSTimur Tabi- CONFIG_SYS_CCSRBAR_PHYS_LOW: 4407e46fedfeSTimur Tabi Lower 32-bits of CONFIG_SYS_CCSRBAR_PHYS. This macro is 4408e46fedfeSTimur Tabi used in assembly code, so it must not contain typecasts or 4409e46fedfeSTimur Tabi integer size suffixes (e.g. "ULL"). 4410e46fedfeSTimur Tabi 4411e46fedfeSTimur Tabi- CONFIG_SYS_CCSR_DO_NOT_RELOCATE: 4412e46fedfeSTimur Tabi If this macro is defined, then CONFIG_SYS_CCSRBAR_PHYS will be 4413e46fedfeSTimur Tabi forced to a value that ensures that CCSR is not relocated. 4414e46fedfeSTimur Tabi 44157f6c2cbcSwdenk- Floppy Disk Support: 44166d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FDC_DRIVE_NUMBER 44177f6c2cbcSwdenk 44187f6c2cbcSwdenk the default drive number (default value 0) 44197f6c2cbcSwdenk 44206d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_ISA_IO_STRIDE 44217f6c2cbcSwdenk 442211ccc33fSMarcel Ziswiler defines the spacing between FDC chipset registers 44237f6c2cbcSwdenk (default value 1) 44247f6c2cbcSwdenk 44256d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_ISA_IO_OFFSET 44267f6c2cbcSwdenk 44277f6c2cbcSwdenk defines the offset of register from address. It 44287f6c2cbcSwdenk depends on which part of the data bus is connected to 442911ccc33fSMarcel Ziswiler the FDC chipset. (default value 0) 44307f6c2cbcSwdenk 44316d0f6bcfSJean-Christophe PLAGNIOL-VILLARD If CONFIG_SYS_ISA_IO_STRIDE CONFIG_SYS_ISA_IO_OFFSET and 44326d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FDC_DRIVE_NUMBER are undefined, they take their 44337f6c2cbcSwdenk default value. 44347f6c2cbcSwdenk 44356d0f6bcfSJean-Christophe PLAGNIOL-VILLARD if CONFIG_SYS_FDC_HW_INIT is defined, then the function 44367f6c2cbcSwdenk fdc_hw_init() is called at the beginning of the FDC 44377f6c2cbcSwdenk setup. fdc_hw_init() must be provided by the board 44387f6c2cbcSwdenk source code. It is used to make hardware dependant 44397f6c2cbcSwdenk initializations. 44407f6c2cbcSwdenk 44410abddf82SMacpaul Lin- CONFIG_IDE_AHB: 44420abddf82SMacpaul Lin Most IDE controllers were designed to be connected with PCI 44430abddf82SMacpaul Lin interface. Only few of them were designed for AHB interface. 44440abddf82SMacpaul Lin When software is doing ATA command and data transfer to 44450abddf82SMacpaul Lin IDE devices through IDE-AHB controller, some additional 44460abddf82SMacpaul Lin registers accessing to these kind of IDE-AHB controller 44470abddf82SMacpaul Lin is requierd. 44480abddf82SMacpaul Lin 44496d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_IMMR: Physical address of the Internal Memory. 445025d6712aSwdenk DO NOT CHANGE unless you know exactly what you're 445125d6712aSwdenk doing! (11-4) [MPC8xx/82xx systems only] 4452c609719bSwdenk 44536d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_INIT_RAM_ADDR: 4454c609719bSwdenk 44557152b1d0Swdenk Start address of memory area that can be used for 4456c609719bSwdenk initial data and stack; please note that this must be 4457c609719bSwdenk writable memory that is working WITHOUT special 4458c609719bSwdenk initialization, i. e. you CANNOT use normal RAM which 4459c609719bSwdenk will become available only after programming the 4460c609719bSwdenk memory controller and running certain initialization 4461c609719bSwdenk sequences. 4462c609719bSwdenk 4463c609719bSwdenk U-Boot uses the following memory types: 4464c609719bSwdenk - MPC8xx and MPC8260: IMMR (internal memory of the CPU) 4465c609719bSwdenk - MPC824X: data cache 4466c609719bSwdenk - PPC4xx: data cache 4467c609719bSwdenk 44686d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_GBL_DATA_OFFSET: 4469c609719bSwdenk 4470c609719bSwdenk Offset of the initial data structure in the memory 44716d0f6bcfSJean-Christophe PLAGNIOL-VILLARD area defined by CONFIG_SYS_INIT_RAM_ADDR. Usually 44726d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_GBL_DATA_OFFSET is chosen such that the initial 4473c609719bSwdenk data is located at the end of the available space 4474553f0982SWolfgang Denk (sometimes written as (CONFIG_SYS_INIT_RAM_SIZE - 44756d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_INIT_DATA_SIZE), and the initial stack is just 44766d0f6bcfSJean-Christophe PLAGNIOL-VILLARD below that area (growing from (CONFIG_SYS_INIT_RAM_ADDR + 44776d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_GBL_DATA_OFFSET) downward. 4478c609719bSwdenk 4479c609719bSwdenk Note: 4480c609719bSwdenk On the MPC824X (or other systems that use the data 4481c609719bSwdenk cache for initial memory) the address chosen for 44826d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_INIT_RAM_ADDR is basically arbitrary - it must 4483c609719bSwdenk point to an otherwise UNUSED address space between 4484c609719bSwdenk the top of RAM and the start of the PCI space. 4485c609719bSwdenk 44866d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SIUMCR: SIU Module Configuration (11-6) 4487c609719bSwdenk 44886d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SYPCR: System Protection Control (11-9) 4489c609719bSwdenk 44906d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_TBSCR: Time Base Status and Control (11-26) 4491c609719bSwdenk 44926d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PISCR: Periodic Interrupt Status and Control (11-31) 4493c609719bSwdenk 44946d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PLPRCR: PLL, Low-Power, and Reset Control Register (15-30) 4495c609719bSwdenk 44966d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SCCR: System Clock and reset Control Register (15-27) 4497c609719bSwdenk 44986d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_OR_TIMING_SDRAM: 4499c609719bSwdenk SDRAM timing 4500c609719bSwdenk 45016d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAMR_PTA: 4502c609719bSwdenk periodic timer for refresh 4503c609719bSwdenk 45046d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_DER: Debug Event Register (37-47) 4505c609719bSwdenk 45066d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- FLASH_BASE0_PRELIM, FLASH_BASE1_PRELIM, CONFIG_SYS_REMAP_OR_AM, 45076d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PRELIM_OR_AM, CONFIG_SYS_OR_TIMING_FLASH, CONFIG_SYS_OR0_REMAP, 45086d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR1_REMAP, CONFIG_SYS_OR1_PRELIM, 45096d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_BR1_PRELIM: 4510c609719bSwdenk Memory Controller Definitions: BR0/1 and OR0/1 (FLASH) 4511c609719bSwdenk 4512c609719bSwdenk- SDRAM_BASE2_PRELIM, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE, 45136d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_OR_TIMING_SDRAM, CONFIG_SYS_OR2_PRELIM, CONFIG_SYS_BR2_PRELIM, 45146d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_OR3_PRELIM, CONFIG_SYS_BR3_PRELIM: 4515c609719bSwdenk Memory Controller Definitions: BR2/3 and OR2/3 (SDRAM) 4516c609719bSwdenk 45176d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAMR_PTA, CONFIG_SYS_MPTPR_2BK_4K, CONFIG_SYS_MPTPR_1BK_4K, CONFIG_SYS_MPTPR_2BK_8K, 45186d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_MPTPR_1BK_8K, CONFIG_SYS_MAMR_8COL, CONFIG_SYS_MAMR_9COL: 4519c609719bSwdenk Machine Mode Register and Memory Periodic Timer 4520c609719bSwdenk Prescaler definitions (SDRAM timing) 4521c609719bSwdenk 45226d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_I2C_UCODE_PATCH, CONFIG_SYS_I2C_DPMEM_OFFSET [0x1FC0]: 4523c609719bSwdenk enable I2C microcode relocation patch (MPC8xx); 4524c609719bSwdenk define relocation offset in DPRAM [DSP2] 4525c609719bSwdenk 45266d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SMC_UCODE_PATCH, CONFIG_SYS_SMC_DPMEM_OFFSET [0x1FC0]: 4527b423d055SHeiko Schocher enable SMC microcode relocation patch (MPC8xx); 4528b423d055SHeiko Schocher define relocation offset in DPRAM [SMC1] 4529b423d055SHeiko Schocher 45306d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SPI_UCODE_PATCH, CONFIG_SYS_SPI_DPMEM_OFFSET [0x1FC0]: 4531c609719bSwdenk enable SPI microcode relocation patch (MPC8xx); 4532c609719bSwdenk define relocation offset in DPRAM [SCC4] 4533c609719bSwdenk 45346d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_USE_OSCCLK: 4535c609719bSwdenk Use OSCM clock mode on MBX8xx board. Be careful, 4536c609719bSwdenk wrong setting might damage your board. Read 4537c609719bSwdenk doc/README.MBX before setting this variable! 4538c609719bSwdenk 45396d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CPM_POST_WORD_ADDR: (MPC8xx, MPC8260 only) 4540ea909b76Swdenk Offset of the bootmode word in DPRAM used by post 4541ea909b76Swdenk (Power On Self Tests). This definition overrides 4542ea909b76Swdenk #define'd default value in commproc.h resp. 4543ea909b76Swdenk cpm_8260.h. 4544ea909b76Swdenk 45456d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PCI_SLV_MEM_LOCAL, CONFIG_SYS_PCI_SLV_MEM_BUS, CONFIG_SYS_PICMR0_MASK_ATTRIB, 45466d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PCI_MSTR0_LOCAL, CONFIG_SYS_PCIMSK0_MASK, CONFIG_SYS_PCI_MSTR1_LOCAL, 45476d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PCIMSK1_MASK, CONFIG_SYS_PCI_MSTR_MEM_LOCAL, CONFIG_SYS_PCI_MSTR_MEM_BUS, 45486d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_CPU_PCI_MEM_START, CONFIG_SYS_PCI_MSTR_MEM_SIZE, CONFIG_SYS_POCMR0_MASK_ATTRIB, 45496d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL, CONFIG_SYS_PCI_MSTR_MEMIO_BUS, CPU_PCI_MEMIO_START, 45506d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PCI_MSTR_MEMIO_SIZE, CONFIG_SYS_POCMR1_MASK_ATTRIB, CONFIG_SYS_PCI_MSTR_IO_LOCAL, 45516d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PCI_MSTR_IO_BUS, CONFIG_SYS_CPU_PCI_IO_START, CONFIG_SYS_PCI_MSTR_IO_SIZE, 45526d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_POCMR2_MASK_ATTRIB: (MPC826x only) 4553a47a12beSStefan Roese Overrides the default PCI memory map in arch/powerpc/cpu/mpc8260/pci.c if set. 45545d232d0eSwdenk 45559cacf4fcSDirk Eibach- CONFIG_PCI_DISABLE_PCIE: 45569cacf4fcSDirk Eibach Disable PCI-Express on systems where it is supported but not 45579cacf4fcSDirk Eibach required. 45589cacf4fcSDirk Eibach 455969fd2d3bSAndrew Sharp- CONFIG_PCI_ENUM_ONLY 456069fd2d3bSAndrew Sharp Only scan through and get the devices on the busses. 456169fd2d3bSAndrew Sharp Don't do any setup work, presumably because someone or 456269fd2d3bSAndrew Sharp something has already done it, and we don't need to do it 456369fd2d3bSAndrew Sharp a second time. Useful for platforms that are pre-booted 456469fd2d3bSAndrew Sharp by coreboot or similar. 456569fd2d3bSAndrew Sharp 4566842033e6SGabor Juhos- CONFIG_PCI_INDIRECT_BRIDGE: 4567842033e6SGabor Juhos Enable support for indirect PCI bridges. 4568842033e6SGabor Juhos 4569a09b9b68SKumar Gala- CONFIG_SYS_SRIO: 4570a09b9b68SKumar Gala Chip has SRIO or not 4571a09b9b68SKumar Gala 4572a09b9b68SKumar Gala- CONFIG_SRIO1: 4573a09b9b68SKumar Gala Board has SRIO 1 port available 4574a09b9b68SKumar Gala 4575a09b9b68SKumar Gala- CONFIG_SRIO2: 4576a09b9b68SKumar Gala Board has SRIO 2 port available 4577a09b9b68SKumar Gala 4578c8b28152SLiu Gang- CONFIG_SRIO_PCIE_BOOT_MASTER 4579c8b28152SLiu Gang Board can support master function for Boot from SRIO and PCIE 4580c8b28152SLiu Gang 4581a09b9b68SKumar Gala- CONFIG_SYS_SRIOn_MEM_VIRT: 4582a09b9b68SKumar Gala Virtual Address of SRIO port 'n' memory region 4583a09b9b68SKumar Gala 4584a09b9b68SKumar Gala- CONFIG_SYS_SRIOn_MEM_PHYS: 4585a09b9b68SKumar Gala Physical Address of SRIO port 'n' memory region 4586a09b9b68SKumar Gala 4587a09b9b68SKumar Gala- CONFIG_SYS_SRIOn_MEM_SIZE: 4588a09b9b68SKumar Gala Size of SRIO port 'n' memory region 4589a09b9b68SKumar Gala 459066bd1846SFabio Estevam- CONFIG_SYS_NAND_BUSWIDTH_16BIT 459166bd1846SFabio Estevam Defined to tell the NAND controller that the NAND chip is using 459266bd1846SFabio Estevam a 16 bit bus. 459366bd1846SFabio Estevam Not all NAND drivers use this symbol. 4594a430e916SFabio Estevam Example of drivers that use it: 459566bd1846SFabio Estevam - drivers/mtd/nand/ndfc.c 4596a430e916SFabio Estevam - drivers/mtd/nand/mxc_nand.c 4597eced4626SAlex Waterman 4598eced4626SAlex Waterman- CONFIG_SYS_NDFC_EBC0_CFG 4599eced4626SAlex Waterman Sets the EBC0_CFG register for the NDFC. If not defined 4600eced4626SAlex Waterman a default value will be used. 4601eced4626SAlex Waterman 4602bb99ad6dSBen Warren- CONFIG_SPD_EEPROM 4603218ca724SWolfgang Denk Get DDR timing information from an I2C EEPROM. Common 4604218ca724SWolfgang Denk with pluggable memory modules such as SODIMMs 4605218ca724SWolfgang Denk 4606bb99ad6dSBen Warren SPD_EEPROM_ADDRESS 4607bb99ad6dSBen Warren I2C address of the SPD EEPROM 4608bb99ad6dSBen Warren 46096d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SPD_BUS_NUM 4610218ca724SWolfgang Denk If SPD EEPROM is on an I2C bus other than the first 4611218ca724SWolfgang Denk one, specify here. Note that the value must resolve 4612218ca724SWolfgang Denk to something your driver can deal with. 4613bb99ad6dSBen Warren 46141b3e3c4fSYork Sun- CONFIG_SYS_DDR_RAW_TIMING 46151b3e3c4fSYork Sun Get DDR timing information from other than SPD. Common with 46161b3e3c4fSYork Sun soldered DDR chips onboard without SPD. DDR raw timing 46171b3e3c4fSYork Sun parameters are extracted from datasheet and hard-coded into 46181b3e3c4fSYork Sun header files or board specific files. 46191b3e3c4fSYork Sun 46206f5e1dc5SYork Sun- CONFIG_FSL_DDR_INTERACTIVE 46216f5e1dc5SYork Sun Enable interactive DDR debugging. See doc/README.fsl-ddr. 46226f5e1dc5SYork Sun 46236d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_83XX_DDR_USES_CS0 4624218ca724SWolfgang Denk Only for 83xx systems. If specified, then DDR should 4625218ca724SWolfgang Denk be configured using CS0 and CS1 instead of CS2 and CS3. 46262ad6b513STimur Tabi 4627c26e454dSwdenk- CONFIG_ETHER_ON_FEC[12] 4628c26e454dSwdenk Define to enable FEC[12] on a 8xx series processor. 4629c26e454dSwdenk 4630c26e454dSwdenk- CONFIG_FEC[12]_PHY 4631c26e454dSwdenk Define to the hardcoded PHY address which corresponds 46326e592385Swdenk to the given FEC; i. e. 4633c26e454dSwdenk #define CONFIG_FEC1_PHY 4 4634c26e454dSwdenk means that the PHY with address 4 is connected to FEC1 4635c26e454dSwdenk 4636c26e454dSwdenk When set to -1, means to probe for first available. 4637c26e454dSwdenk 4638c26e454dSwdenk- CONFIG_FEC[12]_PHY_NORXERR 4639c26e454dSwdenk The PHY does not have a RXERR line (RMII only). 4640c26e454dSwdenk (so program the FEC to ignore it). 4641c26e454dSwdenk 4642c26e454dSwdenk- CONFIG_RMII 4643c26e454dSwdenk Enable RMII mode for all FECs. 4644c26e454dSwdenk Note that this is a global option, we can't 4645c26e454dSwdenk have one FEC in standard MII mode and another in RMII mode. 4646c26e454dSwdenk 46475cf91d6bSwdenk- CONFIG_CRC32_VERIFY 46485cf91d6bSwdenk Add a verify option to the crc32 command. 46495cf91d6bSwdenk The syntax is: 46505cf91d6bSwdenk 46515cf91d6bSwdenk => crc32 -v <address> <count> <crc32> 46525cf91d6bSwdenk 46535cf91d6bSwdenk Where address/count indicate a memory area 46545cf91d6bSwdenk and crc32 is the correct crc32 which the 46555cf91d6bSwdenk area should have. 46565cf91d6bSwdenk 465756523f12Swdenk- CONFIG_LOOPW 465856523f12Swdenk Add the "loopw" memory command. This only takes effect if 4659602ad3b3SJon Loeliger the memory commands are activated globally (CONFIG_CMD_MEM). 466056523f12Swdenk 46617b466641Sstroese- CONFIG_MX_CYCLIC 46627b466641Sstroese Add the "mdc" and "mwc" memory commands. These are cyclic 46637b466641Sstroese "md/mw" commands. 46647b466641Sstroese Examples: 46657b466641Sstroese 46667b466641Sstroese => mdc.b 10 4 500 46677b466641Sstroese This command will print 4 bytes (10,11,12,13) each 500 ms. 46687b466641Sstroese 46697b466641Sstroese => mwc.l 100 12345678 10 46707b466641Sstroese This command will write 12345678 to address 100 all 10 ms. 46717b466641Sstroese 46727b466641Sstroese This only takes effect if the memory commands are activated 4673602ad3b3SJon Loeliger globally (CONFIG_CMD_MEM). 46747b466641Sstroese 46758aa1a2d1Swdenk- CONFIG_SKIP_LOWLEVEL_INIT 4676afc1ce82SMacpaul Lin [ARM, NDS32, MIPS only] If this variable is defined, then certain 4677e03f3169SWolfgang Denk low level initializations (like setting up the memory 4678e03f3169SWolfgang Denk controller) are omitted and/or U-Boot does not 4679e03f3169SWolfgang Denk relocate itself into RAM. 46808aa1a2d1Swdenk 4681e03f3169SWolfgang Denk Normally this variable MUST NOT be defined. The only 4682e03f3169SWolfgang Denk exception is when U-Boot is loaded (to RAM) by some 4683e03f3169SWolfgang Denk other boot loader or by a debugger which performs 4684e03f3169SWolfgang Denk these initializations itself. 46858aa1a2d1Swdenk 4686401bb30bSAneesh V- CONFIG_SPL_BUILD 4687df81238bSMagnus Lilja Modifies the behaviour of start.S when compiling a loader 4688df81238bSMagnus Lilja that is executed before the actual U-Boot. E.g. when 4689df81238bSMagnus Lilja compiling a NAND SPL. 4690400558b5Swdenk 46913aa29de0SYing Zhang- CONFIG_TPL_BUILD 46923aa29de0SYing Zhang Modifies the behaviour of start.S when compiling a loader 46933aa29de0SYing Zhang that is executed after the SPL and before the actual U-Boot. 46943aa29de0SYing Zhang It is loaded by the SPL. 46953aa29de0SYing Zhang 46965df572f0SYing Zhang- CONFIG_SYS_MPC85XX_NO_RESETVEC 46975df572f0SYing Zhang Only for 85xx systems. If this variable is specified, the section 46985df572f0SYing Zhang .resetvec is not kept and the section .bootpg is placed in the 46995df572f0SYing Zhang previous 4k of the .text section. 47005df572f0SYing Zhang 47014213fc29SSimon Glass- CONFIG_ARCH_MAP_SYSMEM 47024213fc29SSimon Glass Generally U-Boot (and in particular the md command) uses 47034213fc29SSimon Glass effective address. It is therefore not necessary to regard 47044213fc29SSimon Glass U-Boot address as virtual addresses that need to be translated 47054213fc29SSimon Glass to physical addresses. However, sandbox requires this, since 47064213fc29SSimon Glass it maintains its own little RAM buffer which contains all 47074213fc29SSimon Glass addressable memory. This option causes some memory accesses 47084213fc29SSimon Glass to be mapped through map_sysmem() / unmap_sysmem(). 47094213fc29SSimon Glass 4710d8834a13SMatthias Weisser- CONFIG_USE_ARCH_MEMCPY 4711d8834a13SMatthias Weisser CONFIG_USE_ARCH_MEMSET 4712d8834a13SMatthias Weisser If these options are used a optimized version of memcpy/memset will 4713d8834a13SMatthias Weisser be used if available. These functions may be faster under some 4714d8834a13SMatthias Weisser conditions but may increase the binary size. 4715d8834a13SMatthias Weisser 4716588a13f7SSimon Glass- CONFIG_X86_RESET_VECTOR 4717588a13f7SSimon Glass If defined, the x86 reset vector code is included. This is not 4718588a13f7SSimon Glass needed when U-Boot is running from Coreboot. 4719b16f521aSGabe Black 4720fc33705eSMark Jackson- CONFIG_SYS_MPUCLK 4721fc33705eSMark Jackson Defines the MPU clock speed (in MHz). 4722fc33705eSMark Jackson 4723fc33705eSMark Jackson NOTE : currently only supported on AM335x platforms. 47245b5ece9eSGabe Black 472516678eb4SHeiko Schocher- CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC: 472616678eb4SHeiko Schocher Enables the RTC32K OSC on AM33xx based plattforms 472716678eb4SHeiko Schocher 4728999d7d32SKaricheri, Muralidharan- CONFIG_SYS_NAND_NO_SUBPAGE_WRITE 4729999d7d32SKaricheri, Muralidharan Option to disable subpage write in NAND driver 4730999d7d32SKaricheri, Muralidharan driver that uses this: 4731999d7d32SKaricheri, Muralidharan drivers/mtd/nand/davinci_nand.c 4732999d7d32SKaricheri, Muralidharan 4733f2717b47STimur TabiFreescale QE/FMAN Firmware Support: 4734f2717b47STimur Tabi----------------------------------- 4735f2717b47STimur Tabi 4736f2717b47STimur TabiThe Freescale QUICCEngine (QE) and Frame Manager (FMAN) both support the 4737f2717b47STimur Tabiloading of "firmware", which is encoded in the QE firmware binary format. 4738f2717b47STimur TabiThis firmware often needs to be loaded during U-Boot booting, so macros 4739f2717b47STimur Tabiare used to identify the storage device (NOR flash, SPI, etc) and the address 4740f2717b47STimur Tabiwithin that device. 4741f2717b47STimur Tabi 4742dcf1d774SZhao Qiang- CONFIG_SYS_FMAN_FW_ADDR 4743dcf1d774SZhao Qiang The address in the storage device where the FMAN microcode is located. The 4744dcf1d774SZhao Qiang meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro 4745dcf1d774SZhao Qiang is also specified. 4746dcf1d774SZhao Qiang 4747dcf1d774SZhao Qiang- CONFIG_SYS_QE_FW_ADDR 4748dcf1d774SZhao Qiang The address in the storage device where the QE microcode is located. The 4749f2717b47STimur Tabi meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro 4750f2717b47STimur Tabi is also specified. 4751f2717b47STimur Tabi 4752f2717b47STimur Tabi- CONFIG_SYS_QE_FMAN_FW_LENGTH 4753f2717b47STimur Tabi The maximum possible size of the firmware. The firmware binary format 4754f2717b47STimur Tabi has a field that specifies the actual size of the firmware, but it 4755f2717b47STimur Tabi might not be possible to read any part of the firmware unless some 4756f2717b47STimur Tabi local storage is allocated to hold the entire firmware first. 4757f2717b47STimur Tabi 4758f2717b47STimur Tabi- CONFIG_SYS_QE_FMAN_FW_IN_NOR 4759f2717b47STimur Tabi Specifies that QE/FMAN firmware is located in NOR flash, mapped as 4760f2717b47STimur Tabi normal addressable memory via the LBC. CONFIG_SYS_FMAN_FW_ADDR is the 4761f2717b47STimur Tabi virtual address in NOR flash. 4762f2717b47STimur Tabi 4763f2717b47STimur Tabi- CONFIG_SYS_QE_FMAN_FW_IN_NAND 4764f2717b47STimur Tabi Specifies that QE/FMAN firmware is located in NAND flash. 4765f2717b47STimur Tabi CONFIG_SYS_FMAN_FW_ADDR is the offset within NAND flash. 4766f2717b47STimur Tabi 4767f2717b47STimur Tabi- CONFIG_SYS_QE_FMAN_FW_IN_MMC 4768f2717b47STimur Tabi Specifies that QE/FMAN firmware is located on the primary SD/MMC 4769f2717b47STimur Tabi device. CONFIG_SYS_FMAN_FW_ADDR is the byte offset on that device. 4770f2717b47STimur Tabi 4771f2717b47STimur Tabi- CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH 4772f2717b47STimur Tabi Specifies that QE/FMAN firmware is located on the primary SPI 4773f2717b47STimur Tabi device. CONFIG_SYS_FMAN_FW_ADDR is the byte offset on that device. 4774f2717b47STimur Tabi 4775292dc6c5SLiu Gang- CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 4776292dc6c5SLiu Gang Specifies that QE/FMAN firmware is located in the remote (master) 4777292dc6c5SLiu Gang memory space. CONFIG_SYS_FMAN_FW_ADDR is a virtual address which 4778fc54c7faSLiu Gang can be mapped from slave TLB->slave LAW->slave SRIO or PCIE outbound 4779fc54c7faSLiu Gang window->master inbound window->master LAW->the ucode address in 4780fc54c7faSLiu Gang master's memory space. 4781f2717b47STimur Tabi 4782b940ca64SJ. German RiveraFreescale Layerscape Management Complex Firmware Support: 4783b940ca64SJ. German Rivera--------------------------------------------------------- 4784b940ca64SJ. German RiveraThe Freescale Layerscape Management Complex (MC) supports the loading of 4785b940ca64SJ. German Rivera"firmware". 4786b940ca64SJ. German RiveraThis firmware often needs to be loaded during U-Boot booting, so macros 4787b940ca64SJ. German Riveraare used to identify the storage device (NOR flash, SPI, etc) and the address 4788b940ca64SJ. German Riverawithin that device. 4789b940ca64SJ. German Rivera 4790b940ca64SJ. German Rivera- CONFIG_FSL_MC_ENET 4791b940ca64SJ. German Rivera Enable the MC driver for Layerscape SoCs. 4792b940ca64SJ. German Rivera 4793b940ca64SJ. German Rivera- CONFIG_SYS_LS_MC_FW_ADDR 4794b940ca64SJ. German Rivera The address in the storage device where the firmware is located. The 4795b940ca64SJ. German Rivera meaning of this address depends on which CONFIG_SYS_LS_MC_FW_IN_xxx macro 4796b940ca64SJ. German Rivera is also specified. 4797b940ca64SJ. German Rivera 4798b940ca64SJ. German Rivera- CONFIG_SYS_LS_MC_FW_LENGTH 4799b940ca64SJ. German Rivera The maximum possible size of the firmware. The firmware binary format 4800b940ca64SJ. German Rivera has a field that specifies the actual size of the firmware, but it 4801b940ca64SJ. German Rivera might not be possible to read any part of the firmware unless some 4802b940ca64SJ. German Rivera local storage is allocated to hold the entire firmware first. 4803b940ca64SJ. German Rivera 4804b940ca64SJ. German Rivera- CONFIG_SYS_LS_MC_FW_IN_NOR 4805b940ca64SJ. German Rivera Specifies that MC firmware is located in NOR flash, mapped as 4806b940ca64SJ. German Rivera normal addressable memory via the LBC. CONFIG_SYS_LS_MC_FW_ADDR is the 4807b940ca64SJ. German Rivera virtual address in NOR flash. 4808b940ca64SJ. German Rivera 4809c609719bSwdenkBuilding the Software: 4810c609719bSwdenk====================== 4811c609719bSwdenk 4812218ca724SWolfgang DenkBuilding U-Boot has been tested in several native build environments 4813218ca724SWolfgang Denkand in many different cross environments. Of course we cannot support 4814218ca724SWolfgang Denkall possibly existing versions of cross development tools in all 4815218ca724SWolfgang Denk(potentially obsolete) versions. In case of tool chain problems we 4816218ca724SWolfgang Denkrecommend to use the ELDK (see http://www.denx.de/wiki/DULG/ELDK) 4817218ca724SWolfgang Denkwhich is extensively used to build and test U-Boot. 4818c609719bSwdenk 4819218ca724SWolfgang DenkIf you are not using a native environment, it is assumed that you 4820218ca724SWolfgang Denkhave GNU cross compiling tools available in your path. In this case, 4821218ca724SWolfgang Denkyou must set the environment variable CROSS_COMPILE in your shell. 4822218ca724SWolfgang DenkNote that no changes to the Makefile or any other source files are 4823218ca724SWolfgang Denknecessary. For example using the ELDK on a 4xx CPU, please enter: 4824c609719bSwdenk 4825218ca724SWolfgang Denk $ CROSS_COMPILE=ppc_4xx- 4826218ca724SWolfgang Denk $ export CROSS_COMPILE 4827c609719bSwdenk 48282f8d396bSPeter TyserNote: If you wish to generate Windows versions of the utilities in 48292f8d396bSPeter Tyser the tools directory you can use the MinGW toolchain 48302f8d396bSPeter Tyser (http://www.mingw.org). Set your HOST tools to the MinGW 48312f8d396bSPeter Tyser toolchain and execute 'make tools'. For example: 48322f8d396bSPeter Tyser 48332f8d396bSPeter Tyser $ make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools 48342f8d396bSPeter Tyser 48352f8d396bSPeter Tyser Binaries such as tools/mkimage.exe will be created which can 48362f8d396bSPeter Tyser be executed on computers running Windows. 48372f8d396bSPeter Tyser 4838c609719bSwdenkU-Boot is intended to be simple to build. After installing the 4839c609719bSwdenksources you must configure U-Boot for one specific board type. This 4840c609719bSwdenkis done by typing: 4841c609719bSwdenk 4842c609719bSwdenk make NAME_config 4843c609719bSwdenk 4844218ca724SWolfgang Denkwhere "NAME_config" is the name of one of the existing configu- 48454d675ae6SMichael Jonesrations; see boards.cfg for supported names. 484654387ac9Swdenk 4847c609719bSwdenkNote: for some board special configuration names may exist; check if 4848c609719bSwdenk additional information is available from the board vendor; for 48492729af9dSwdenk instance, the TQM823L systems are available without (standard) 48502729af9dSwdenk or with LCD support. You can select such additional "features" 485111ccc33fSMarcel Ziswiler when choosing the configuration, i. e. 4852c609719bSwdenk 48532729af9dSwdenk make TQM823L_config 48542729af9dSwdenk - will configure for a plain TQM823L, i. e. no LCD support 4855c609719bSwdenk 4856c609719bSwdenk make TQM823L_LCD_config 4857c609719bSwdenk - will configure for a TQM823L with U-Boot console on LCD 4858c609719bSwdenk 4859c609719bSwdenk etc. 4860c609719bSwdenk 4861c609719bSwdenk 4862c609719bSwdenkFinally, type "make all", and you should get some working U-Boot 48637152b1d0Swdenkimages ready for download to / installation on your system: 4864c609719bSwdenk 4865c609719bSwdenk- "u-boot.bin" is a raw binary image 4866c609719bSwdenk- "u-boot" is an image in ELF binary format 4867c609719bSwdenk- "u-boot.srec" is in Motorola S-Record format 4868c609719bSwdenk 4869baf31249SMarian BalakowiczBy default the build is performed locally and the objects are saved 4870baf31249SMarian Balakowiczin the source directory. One of the two methods can be used to change 4871baf31249SMarian Balakowiczthis behavior and build U-Boot to some external directory: 4872baf31249SMarian Balakowicz 4873baf31249SMarian Balakowicz1. Add O= to the make command line invocations: 4874baf31249SMarian Balakowicz 4875baf31249SMarian Balakowicz make O=/tmp/build distclean 4876baf31249SMarian Balakowicz make O=/tmp/build NAME_config 4877baf31249SMarian Balakowicz make O=/tmp/build all 4878baf31249SMarian Balakowicz 4879baf31249SMarian Balakowicz2. Set environment variable BUILD_DIR to point to the desired location: 4880baf31249SMarian Balakowicz 4881baf31249SMarian Balakowicz export BUILD_DIR=/tmp/build 4882baf31249SMarian Balakowicz make distclean 4883baf31249SMarian Balakowicz make NAME_config 4884baf31249SMarian Balakowicz make all 4885baf31249SMarian Balakowicz 4886baf31249SMarian BalakowiczNote that the command line "O=" setting overrides the BUILD_DIR environment 4887baf31249SMarian Balakowiczvariable. 4888baf31249SMarian Balakowicz 4889c609719bSwdenk 4890c609719bSwdenkPlease be aware that the Makefiles assume you are using GNU make, so 4891c609719bSwdenkfor instance on NetBSD you might need to use "gmake" instead of 4892c609719bSwdenknative "make". 4893c609719bSwdenk 4894c609719bSwdenk 4895c609719bSwdenkIf the system board that you have is not listed, then you will need 4896c609719bSwdenkto port U-Boot to your hardware platform. To do this, follow these 4897c609719bSwdenksteps: 4898c609719bSwdenk 4899c609719bSwdenk1. Add a new configuration option for your board to the toplevel 49004d675ae6SMichael Jones "boards.cfg" file, using the existing entries as examples. 49014d675ae6SMichael Jones Follow the instructions there to keep the boards in order. 4902c609719bSwdenk2. Create a new directory to hold your board specific code. Add any 490385ec0bccSwdenk files you need. In your board directory, you will need at least 490485ec0bccSwdenk the "Makefile", a "<board>.c", "flash.c" and "u-boot.lds". 490585ec0bccSwdenk3. Create a new configuration file "include/configs/<board>.h" for 490685ec0bccSwdenk your board 4907c609719bSwdenk3. If you're porting U-Boot to a new CPU, then also create a new 4908c609719bSwdenk directory to hold your CPU specific code. Add any files you need. 490985ec0bccSwdenk4. Run "make <board>_config" with your new name. 4910c609719bSwdenk5. Type "make", and you should get a working "u-boot.srec" file 4911c609719bSwdenk to be installed on your target system. 491285ec0bccSwdenk6. Debug and solve any problems that might arise. 4913c609719bSwdenk [Of course, this last step is much harder than it sounds.] 4914c609719bSwdenk 4915c609719bSwdenk 4916c609719bSwdenkTesting of U-Boot Modifications, Ports to New Hardware, etc.: 4917c609719bSwdenk============================================================== 4918c609719bSwdenk 4919c609719bSwdenkIf you have modified U-Boot sources (for instance added a new board 4920c609719bSwdenkor support for new devices, a new CPU, etc.) you are expected to 4921c609719bSwdenkprovide feedback to the other developers. The feedback normally takes 4922c609719bSwdenkthe form of a "patch", i. e. a context diff against a certain (latest 4923218ca724SWolfgang Denkofficial or latest in the git repository) version of U-Boot sources. 4924c609719bSwdenk 4925c609719bSwdenkBut before you submit such a patch, please verify that your modifi- 4926c609719bSwdenkcation did not break existing code. At least make sure that *ALL* of 4927c609719bSwdenkthe supported boards compile WITHOUT ANY compiler warnings. To do so, 4928c609719bSwdenkjust run the "MAKEALL" script, which will configure and build U-Boot 4929c609719bSwdenkfor ALL supported system. Be warned, this will take a while. You can 49307152b1d0Swdenkselect which (cross) compiler to use by passing a `CROSS_COMPILE' 4931218ca724SWolfgang Denkenvironment variable to the script, i. e. to use the ELDK cross tools 4932218ca724SWolfgang Denkyou can type 4933c609719bSwdenk 4934c609719bSwdenk CROSS_COMPILE=ppc_8xx- MAKEALL 4935c609719bSwdenk 4936c609719bSwdenkor to build on a native PowerPC system you can type 4937c609719bSwdenk 4938c609719bSwdenk CROSS_COMPILE=' ' MAKEALL 4939c609719bSwdenk 4940218ca724SWolfgang DenkWhen using the MAKEALL script, the default behaviour is to build 4941218ca724SWolfgang DenkU-Boot in the source directory. This location can be changed by 4942218ca724SWolfgang Denksetting the BUILD_DIR environment variable. Also, for each target 4943218ca724SWolfgang Denkbuilt, the MAKEALL script saves two log files (<target>.ERR and 4944218ca724SWolfgang Denk<target>.MAKEALL) in the <source dir>/LOG directory. This default 4945218ca724SWolfgang Denklocation can be changed by setting the MAKEALL_LOGDIR environment 4946218ca724SWolfgang Denkvariable. For example: 4947baf31249SMarian Balakowicz 4948baf31249SMarian Balakowicz export BUILD_DIR=/tmp/build 4949baf31249SMarian Balakowicz export MAKEALL_LOGDIR=/tmp/log 4950baf31249SMarian Balakowicz CROSS_COMPILE=ppc_8xx- MAKEALL 4951baf31249SMarian Balakowicz 4952218ca724SWolfgang DenkWith the above settings build objects are saved in the /tmp/build, 4953218ca724SWolfgang Denklog files are saved in the /tmp/log and the source tree remains clean 4954218ca724SWolfgang Denkduring the whole build process. 4955baf31249SMarian Balakowicz 4956baf31249SMarian Balakowicz 4957c609719bSwdenkSee also "U-Boot Porting Guide" below. 4958c609719bSwdenk 4959c609719bSwdenk 4960c609719bSwdenkMonitor Commands - Overview: 4961c609719bSwdenk============================ 4962c609719bSwdenk 4963c609719bSwdenkgo - start application at address 'addr' 4964c609719bSwdenkrun - run commands in an environment variable 4965c609719bSwdenkbootm - boot application image from memory 4966c609719bSwdenkbootp - boot image via network using BootP/TFTP protocol 496744f074c7SMarek Vasutbootz - boot zImage from memory 4968c609719bSwdenktftpboot- boot image via network using TFTP protocol 4969c609719bSwdenk and env variables "ipaddr" and "serverip" 4970c609719bSwdenk (and eventually "gatewayip") 49711fb7cd49SSimon Glasstftpput - upload a file via network using TFTP protocol 4972c609719bSwdenkrarpboot- boot image via network using RARP/TFTP protocol 4973c609719bSwdenkdiskboot- boot from IDE devicebootd - boot default, i.e., run 'bootcmd' 4974c609719bSwdenkloads - load S-Record file over serial line 4975c609719bSwdenkloadb - load binary file over serial line (kermit mode) 4976c609719bSwdenkmd - memory display 4977c609719bSwdenkmm - memory modify (auto-incrementing) 4978c609719bSwdenknm - memory modify (constant address) 4979c609719bSwdenkmw - memory write (fill) 4980c609719bSwdenkcp - memory copy 4981c609719bSwdenkcmp - memory compare 4982c609719bSwdenkcrc32 - checksum calculation 49830f89c54bSPeter Tyseri2c - I2C sub-system 4984c609719bSwdenksspi - SPI utility commands 4985c609719bSwdenkbase - print or set address offset 4986c609719bSwdenkprintenv- print environment variables 4987c609719bSwdenksetenv - set environment variables 4988c609719bSwdenksaveenv - save environment variables to persistent storage 4989c609719bSwdenkprotect - enable or disable FLASH write protection 4990c609719bSwdenkerase - erase FLASH memory 4991c609719bSwdenkflinfo - print FLASH memory information 499210635afaSKarl O. Pincnand - NAND memory operations (see doc/README.nand) 4993c609719bSwdenkbdinfo - print Board Info structure 4994c609719bSwdenkiminfo - print header information for application image 4995c609719bSwdenkconinfo - print console devices and informations 4996c609719bSwdenkide - IDE sub-system 4997c609719bSwdenkloop - infinite loop on address range 499856523f12Swdenkloopw - infinite write loop on address range 4999c609719bSwdenkmtest - simple RAM test 5000c609719bSwdenkicache - enable or disable instruction cache 5001c609719bSwdenkdcache - enable or disable data cache 5002c609719bSwdenkreset - Perform RESET of the CPU 5003c609719bSwdenkecho - echo args to console 5004c609719bSwdenkversion - print monitor version 5005c609719bSwdenkhelp - print online help 5006c609719bSwdenk? - alias for 'help' 5007c609719bSwdenk 5008c609719bSwdenk 5009c609719bSwdenkMonitor Commands - Detailed Description: 5010c609719bSwdenk======================================== 5011c609719bSwdenk 5012c609719bSwdenkTODO. 5013c609719bSwdenk 5014c609719bSwdenkFor now: just type "help <command>". 5015c609719bSwdenk 5016c609719bSwdenk 5017c609719bSwdenkEnvironment Variables: 5018c609719bSwdenk====================== 5019c609719bSwdenk 5020c609719bSwdenkU-Boot supports user configuration using Environment Variables which 5021c609719bSwdenkcan be made persistent by saving to Flash memory. 5022c609719bSwdenk 5023c609719bSwdenkEnvironment Variables are set using "setenv", printed using 5024c609719bSwdenk"printenv", and saved to Flash using "saveenv". Using "setenv" 5025c609719bSwdenkwithout a value can be used to delete a variable from the 5026c609719bSwdenkenvironment. As long as you don't save the environment you are 5027c609719bSwdenkworking with an in-memory copy. In case the Flash area containing the 5028c609719bSwdenkenvironment is erased by accident, a default environment is provided. 5029c609719bSwdenk 5030c96f86eeSWolfgang DenkSome configuration options can be set using Environment Variables. 5031c96f86eeSWolfgang Denk 5032c96f86eeSWolfgang DenkList of environment variables (most likely not complete): 5033c609719bSwdenk 5034c609719bSwdenk baudrate - see CONFIG_BAUDRATE 5035c609719bSwdenk 5036c609719bSwdenk bootdelay - see CONFIG_BOOTDELAY 5037c609719bSwdenk 5038c609719bSwdenk bootcmd - see CONFIG_BOOTCOMMAND 5039c609719bSwdenk 5040c609719bSwdenk bootargs - Boot arguments when booting an RTOS image 5041c609719bSwdenk 5042c609719bSwdenk bootfile - Name of the image to load with TFTP 5043c609719bSwdenk 50447d721e34SBartlomiej Sieka bootm_low - Memory range available for image processing in the bootm 50457d721e34SBartlomiej Sieka command can be restricted. This variable is given as 50467d721e34SBartlomiej Sieka a hexadecimal number and defines lowest address allowed 50477d721e34SBartlomiej Sieka for use by the bootm command. See also "bootm_size" 50487d721e34SBartlomiej Sieka environment variable. Address defined by "bootm_low" is 50497d721e34SBartlomiej Sieka also the base of the initial memory mapping for the Linux 5050c3624e6eSGrant Likely kernel -- see the description of CONFIG_SYS_BOOTMAPSZ and 5051c3624e6eSGrant Likely bootm_mapsize. 5052c3624e6eSGrant Likely 5053c3624e6eSGrant Likely bootm_mapsize - Size of the initial memory mapping for the Linux kernel. 5054c3624e6eSGrant Likely This variable is given as a hexadecimal number and it 5055c3624e6eSGrant Likely defines the size of the memory region starting at base 5056c3624e6eSGrant Likely address bootm_low that is accessible by the Linux kernel 5057c3624e6eSGrant Likely during early boot. If unset, CONFIG_SYS_BOOTMAPSZ is used 5058c3624e6eSGrant Likely as the default value if it is defined, and bootm_size is 5059c3624e6eSGrant Likely used otherwise. 50607d721e34SBartlomiej Sieka 50617d721e34SBartlomiej Sieka bootm_size - Memory range available for image processing in the bootm 50627d721e34SBartlomiej Sieka command can be restricted. This variable is given as 50637d721e34SBartlomiej Sieka a hexadecimal number and defines the size of the region 50647d721e34SBartlomiej Sieka allowed for use by the bootm command. See also "bootm_low" 50657d721e34SBartlomiej Sieka environment variable. 50667d721e34SBartlomiej Sieka 50674bae9090SBartlomiej Sieka updatefile - Location of the software update file on a TFTP server, used 50684bae9090SBartlomiej Sieka by the automatic software update feature. Please refer to 50694bae9090SBartlomiej Sieka documentation in doc/README.update for more details. 50704bae9090SBartlomiej Sieka 5071c609719bSwdenk autoload - if set to "no" (any string beginning with 'n'), 5072c609719bSwdenk "bootp" will just load perform a lookup of the 5073c609719bSwdenk configuration from the BOOTP server, but not try to 5074c609719bSwdenk load any image using TFTP 5075c609719bSwdenk 5076c609719bSwdenk autostart - if set to "yes", an image loaded using the "bootp", 5077c609719bSwdenk "rarpboot", "tftpboot" or "diskboot" commands will 5078c609719bSwdenk be automatically started (by internally calling 5079c609719bSwdenk "bootm") 5080c609719bSwdenk 50814a6fd34bSwdenk If set to "no", a standalone image passed to the 50824a6fd34bSwdenk "bootm" command will be copied to the load address 50834a6fd34bSwdenk (and eventually uncompressed), but NOT be started. 50844a6fd34bSwdenk This can be used to load and uncompress arbitrary 50854a6fd34bSwdenk data. 50864a6fd34bSwdenk 5087a28afca5SDavid A. Long fdt_high - if set this restricts the maximum address that the 5088a28afca5SDavid A. Long flattened device tree will be copied into upon boot. 5089fa34f6b2SShawn Guo For example, if you have a system with 1 GB memory 5090fa34f6b2SShawn Guo at physical address 0x10000000, while Linux kernel 5091fa34f6b2SShawn Guo only recognizes the first 704 MB as low memory, you 5092fa34f6b2SShawn Guo may need to set fdt_high as 0x3C000000 to have the 5093fa34f6b2SShawn Guo device tree blob be copied to the maximum address 5094fa34f6b2SShawn Guo of the 704 MB low memory, so that Linux kernel can 5095fa34f6b2SShawn Guo access it during the boot procedure. 5096fa34f6b2SShawn Guo 5097a28afca5SDavid A. Long If this is set to the special value 0xFFFFFFFF then 5098a28afca5SDavid A. Long the fdt will not be copied at all on boot. For this 5099a28afca5SDavid A. Long to work it must reside in writable memory, have 5100a28afca5SDavid A. Long sufficient padding on the end of it for u-boot to 5101a28afca5SDavid A. Long add the information it needs into it, and the memory 5102a28afca5SDavid A. Long must be accessible by the kernel. 5103a28afca5SDavid A. Long 5104eea63e05SSimon Glass fdtcontroladdr- if set this is the address of the control flattened 5105eea63e05SSimon Glass device tree used by U-Boot when CONFIG_OF_CONTROL is 5106eea63e05SSimon Glass defined. 5107eea63e05SSimon Glass 510817ea1177Swdenk i2cfast - (PPC405GP|PPC405EP only) 510917ea1177Swdenk if set to 'y' configures Linux I2C driver for fast 511017ea1177Swdenk mode (400kHZ). This environment variable is used in 511117ea1177Swdenk initialization code. So, for changes to be effective 511217ea1177Swdenk it must be saved and board must be reset. 511317ea1177Swdenk 5114c609719bSwdenk initrd_high - restrict positioning of initrd images: 5115c609719bSwdenk If this variable is not set, initrd images will be 5116c609719bSwdenk copied to the highest possible address in RAM; this 5117c609719bSwdenk is usually what you want since it allows for 5118c609719bSwdenk maximum initrd size. If for some reason you want to 5119c609719bSwdenk make sure that the initrd image is loaded below the 51206d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_BOOTMAPSZ limit, you can set this environment 5121c609719bSwdenk variable to a value of "no" or "off" or "0". 5122c609719bSwdenk Alternatively, you can set it to a maximum upper 5123c609719bSwdenk address to use (U-Boot will still check that it 5124c609719bSwdenk does not overwrite the U-Boot stack and data). 5125c609719bSwdenk 5126c609719bSwdenk For instance, when you have a system with 16 MB 51277152b1d0Swdenk RAM, and want to reserve 4 MB from use by Linux, 5128c609719bSwdenk you can do this by adding "mem=12M" to the value of 5129c609719bSwdenk the "bootargs" variable. However, now you must make 51307152b1d0Swdenk sure that the initrd image is placed in the first 5131c609719bSwdenk 12 MB as well - this can be done with 5132c609719bSwdenk 5133c609719bSwdenk setenv initrd_high 00c00000 5134c609719bSwdenk 513538b99261Swdenk If you set initrd_high to 0xFFFFFFFF, this is an 513638b99261Swdenk indication to U-Boot that all addresses are legal 513738b99261Swdenk for the Linux kernel, including addresses in flash 513838b99261Swdenk memory. In this case U-Boot will NOT COPY the 513938b99261Swdenk ramdisk at all. This may be useful to reduce the 514038b99261Swdenk boot time on your system, but requires that this 514138b99261Swdenk feature is supported by your Linux kernel. 514238b99261Swdenk 5143c609719bSwdenk ipaddr - IP address; needed for tftpboot command 5144c609719bSwdenk 5145c609719bSwdenk loadaddr - Default load address for commands like "bootp", 5146dc7c9a1aSwdenk "rarpboot", "tftpboot", "loadb" or "diskboot" 5147c609719bSwdenk 5148c609719bSwdenk loads_echo - see CONFIG_LOADS_ECHO 5149c609719bSwdenk 5150c609719bSwdenk serverip - TFTP server IP address; needed for tftpboot command 5151c609719bSwdenk 5152c609719bSwdenk bootretry - see CONFIG_BOOT_RETRY_TIME 5153c609719bSwdenk 5154c609719bSwdenk bootdelaykey - see CONFIG_AUTOBOOT_DELAY_STR 5155c609719bSwdenk 5156c609719bSwdenk bootstopkey - see CONFIG_AUTOBOOT_STOP_STR 5157c609719bSwdenk 5158e2a53458SMike Frysinger ethprime - controls which interface is used first. 5159a3d991bdSwdenk 5160e2a53458SMike Frysinger ethact - controls which interface is currently active. 5161e2a53458SMike Frysinger For example you can do the following 5162a3d991bdSwdenk 516348690d80SHeiko Schocher => setenv ethact FEC 516448690d80SHeiko Schocher => ping 192.168.0.1 # traffic sent on FEC 516548690d80SHeiko Schocher => setenv ethact SCC 516648690d80SHeiko Schocher => ping 10.0.0.1 # traffic sent on SCC 5167a3d991bdSwdenk 5168e1692577SMatthias Fuchs ethrotate - When set to "no" U-Boot does not go through all 5169e1692577SMatthias Fuchs available network interfaces. 5170e1692577SMatthias Fuchs It just stays at the currently selected interface. 5171e1692577SMatthias Fuchs 5172a3d991bdSwdenk netretry - When set to "no" each network operation will 5173a3d991bdSwdenk either succeed or fail without retrying. 51746e592385Swdenk When set to "once" the network operation will 51756e592385Swdenk fail when all the available network interfaces 51766e592385Swdenk are tried once without success. 5177a3d991bdSwdenk Useful on scripts which control the retry operation 5178a3d991bdSwdenk themselves. 5179a3d991bdSwdenk 5180b4e2f89dSJean-Christophe PLAGNIOL-VILLARD npe_ucode - set load address for the NPE microcode 5181a1cf027aSJean-Christophe PLAGNIOL-VILLARD 51828d51aacdSSimon Glass silent_linux - If set then linux will be told to boot silently, by 51838d51aacdSSimon Glass changing the console to be empty. If "yes" it will be 51848d51aacdSSimon Glass made silent. If "no" it will not be made silent. If 51858d51aacdSSimon Glass unset, then it will be made silent if the U-Boot console 51868d51aacdSSimon Glass is silent. 51878d51aacdSSimon Glass 518828cb9375SWolfgang Denk tftpsrcport - If this is set, the value is used for TFTP's 5189ecb0ccd9SWolfgang Denk UDP source port. 5190ecb0ccd9SWolfgang Denk 519128cb9375SWolfgang Denk tftpdstport - If this is set, the value is used for TFTP's UDP 519228cb9375SWolfgang Denk destination port instead of the Well Know Port 69. 519328cb9375SWolfgang Denk 5194c96f86eeSWolfgang Denk tftpblocksize - Block size to use for TFTP transfers; if not set, 5195c96f86eeSWolfgang Denk we use the TFTP server's default block size 5196c96f86eeSWolfgang Denk 5197c96f86eeSWolfgang Denk tftptimeout - Retransmission timeout for TFTP packets (in milli- 5198c96f86eeSWolfgang Denk seconds, minimum value is 1000 = 1 second). Defines 5199c96f86eeSWolfgang Denk when a packet is considered to be lost so it has to 5200c96f86eeSWolfgang Denk be retransmitted. The default is 5000 = 5 seconds. 5201c96f86eeSWolfgang Denk Lowering this value may make downloads succeed 5202c96f86eeSWolfgang Denk faster in networks with high packet loss rates or 5203c96f86eeSWolfgang Denk with unreliable TFTP servers. 5204c96f86eeSWolfgang Denk 5205a3d991bdSwdenk vlan - When set to a value < 4095 the traffic over 520611ccc33fSMarcel Ziswiler Ethernet is encapsulated/received over 802.1q 5207a3d991bdSwdenk VLAN tagged frames. 5208c609719bSwdenk 5209dc0b7b0eSJason HobbsThe following image location variables contain the location of images 5210dc0b7b0eSJason Hobbsused in booting. The "Image" column gives the role of the image and is 5211dc0b7b0eSJason Hobbsnot an environment variable name. The other columns are environment 5212dc0b7b0eSJason Hobbsvariable names. "File Name" gives the name of the file on a TFTP 5213dc0b7b0eSJason Hobbsserver, "RAM Address" gives the location in RAM the image will be 5214dc0b7b0eSJason Hobbsloaded to, and "Flash Location" gives the image's address in NOR 5215dc0b7b0eSJason Hobbsflash or offset in NAND flash. 5216dc0b7b0eSJason Hobbs 5217dc0b7b0eSJason Hobbs*Note* - these variables don't have to be defined for all boards, some 5218dc0b7b0eSJason Hobbsboards currenlty use other variables for these purposes, and some 5219dc0b7b0eSJason Hobbsboards use these variables for other purposes. 5220dc0b7b0eSJason Hobbs 5221dc0b7b0eSJason HobbsImage File Name RAM Address Flash Location 5222dc0b7b0eSJason Hobbs----- --------- ----------- -------------- 5223dc0b7b0eSJason Hobbsu-boot u-boot u-boot_addr_r u-boot_addr 5224dc0b7b0eSJason HobbsLinux kernel bootfile kernel_addr_r kernel_addr 5225dc0b7b0eSJason Hobbsdevice tree blob fdtfile fdt_addr_r fdt_addr 5226dc0b7b0eSJason Hobbsramdisk ramdiskfile ramdisk_addr_r ramdisk_addr 5227dc0b7b0eSJason Hobbs 5228c609719bSwdenkThe following environment variables may be used and automatically 5229c609719bSwdenkupdated by the network boot commands ("bootp" and "rarpboot"), 5230c609719bSwdenkdepending the information provided by your boot server: 5231c609719bSwdenk 5232c609719bSwdenk bootfile - see above 5233c609719bSwdenk dnsip - IP address of your Domain Name Server 5234fe389a82Sstroese dnsip2 - IP address of your secondary Domain Name Server 5235c609719bSwdenk gatewayip - IP address of the Gateway (Router) to use 5236c609719bSwdenk hostname - Target hostname 5237c609719bSwdenk ipaddr - see above 5238c609719bSwdenk netmask - Subnet Mask 5239c609719bSwdenk rootpath - Pathname of the root filesystem on the NFS server 5240c609719bSwdenk serverip - see above 5241c609719bSwdenk 5242c609719bSwdenk 5243c609719bSwdenkThere are two special Environment Variables: 5244c609719bSwdenk 5245c609719bSwdenk serial# - contains hardware identification information such 5246c609719bSwdenk as type string and/or serial number 5247c609719bSwdenk ethaddr - Ethernet address 5248c609719bSwdenk 5249c609719bSwdenkThese variables can be set only once (usually during manufacturing of 5250c609719bSwdenkthe board). U-Boot refuses to delete or overwrite these variables 5251c609719bSwdenkonce they have been set once. 5252c609719bSwdenk 5253c609719bSwdenk 5254c1551ea8SstroeseFurther special Environment Variables: 5255c1551ea8Sstroese 5256c1551ea8Sstroese ver - Contains the U-Boot version string as printed 5257c1551ea8Sstroese with the "version" command. This variable is 5258c1551ea8Sstroese readonly (see CONFIG_VERSION_VARIABLE). 5259c1551ea8Sstroese 5260c1551ea8Sstroese 5261c609719bSwdenkPlease note that changes to some configuration parameters may take 5262c609719bSwdenkonly effect after the next boot (yes, that's just like Windoze :-). 5263c609719bSwdenk 5264c609719bSwdenk 5265170ab110SJoe HershbergerCallback functions for environment variables: 5266170ab110SJoe Hershberger--------------------------------------------- 5267170ab110SJoe Hershberger 5268170ab110SJoe HershbergerFor some environment variables, the behavior of u-boot needs to change 5269170ab110SJoe Hershbergerwhen their values are changed. This functionailty allows functions to 5270170ab110SJoe Hershbergerbe associated with arbitrary variables. On creation, overwrite, or 5271170ab110SJoe Hershbergerdeletion, the callback will provide the opportunity for some side 5272170ab110SJoe Hershbergereffect to happen or for the change to be rejected. 5273170ab110SJoe Hershberger 5274170ab110SJoe HershbergerThe callbacks are named and associated with a function using the 5275170ab110SJoe HershbergerU_BOOT_ENV_CALLBACK macro in your board or driver code. 5276170ab110SJoe Hershberger 5277170ab110SJoe HershbergerThese callbacks are associated with variables in one of two ways. The 5278170ab110SJoe Hershbergerstatic list can be added to by defining CONFIG_ENV_CALLBACK_LIST_STATIC 5279170ab110SJoe Hershbergerin the board configuration to a string that defines a list of 5280170ab110SJoe Hershbergerassociations. The list must be in the following format: 5281170ab110SJoe Hershberger 5282170ab110SJoe Hershberger entry = variable_name[:callback_name] 5283170ab110SJoe Hershberger list = entry[,list] 5284170ab110SJoe Hershberger 5285170ab110SJoe HershbergerIf the callback name is not specified, then the callback is deleted. 5286170ab110SJoe HershbergerSpaces are also allowed anywhere in the list. 5287170ab110SJoe Hershberger 5288170ab110SJoe HershbergerCallbacks can also be associated by defining the ".callbacks" variable 5289170ab110SJoe Hershbergerwith the same list format above. Any association in ".callbacks" will 5290170ab110SJoe Hershbergeroverride any association in the static list. You can define 5291170ab110SJoe HershbergerCONFIG_ENV_CALLBACK_LIST_DEFAULT to a list (string) to define the 5292170ab110SJoe Hershberger".callbacks" envirnoment variable in the default or embedded environment. 5293170ab110SJoe Hershberger 5294170ab110SJoe Hershberger 5295f07771ccSwdenkCommand Line Parsing: 5296f07771ccSwdenk===================== 5297f07771ccSwdenk 5298f07771ccSwdenkThere are two different command line parsers available with U-Boot: 52997152b1d0Swdenkthe old "simple" one, and the much more powerful "hush" shell: 5300f07771ccSwdenk 5301f07771ccSwdenkOld, simple command line parser: 5302f07771ccSwdenk-------------------------------- 5303f07771ccSwdenk 5304f07771ccSwdenk- supports environment variables (through setenv / saveenv commands) 5305f07771ccSwdenk- several commands on one line, separated by ';' 5306fe126d8bSWolfgang Denk- variable substitution using "... ${name} ..." syntax 5307f07771ccSwdenk- special characters ('$', ';') can be escaped by prefixing with '\', 5308f07771ccSwdenk for example: 5309fe126d8bSWolfgang Denk setenv bootcmd bootm \${address} 5310f07771ccSwdenk- You can also escape text by enclosing in single apostrophes, for example: 5311f07771ccSwdenk setenv addip 'setenv bootargs $bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off' 5312f07771ccSwdenk 5313f07771ccSwdenkHush shell: 5314f07771ccSwdenk----------- 5315f07771ccSwdenk 5316f07771ccSwdenk- similar to Bourne shell, with control structures like 5317f07771ccSwdenk if...then...else...fi, for...do...done; while...do...done, 5318f07771ccSwdenk until...do...done, ... 5319f07771ccSwdenk- supports environment ("global") variables (through setenv / saveenv 5320f07771ccSwdenk commands) and local shell variables (through standard shell syntax 5321f07771ccSwdenk "name=value"); only environment variables can be used with "run" 5322f07771ccSwdenk command 5323f07771ccSwdenk 5324f07771ccSwdenkGeneral rules: 5325f07771ccSwdenk-------------- 5326f07771ccSwdenk 5327f07771ccSwdenk(1) If a command line (or an environment variable executed by a "run" 5328f07771ccSwdenk command) contains several commands separated by semicolon, and 5329f07771ccSwdenk one of these commands fails, then the remaining commands will be 5330f07771ccSwdenk executed anyway. 5331f07771ccSwdenk 5332f07771ccSwdenk(2) If you execute several variables with one call to run (i. e. 533311ccc33fSMarcel Ziswiler calling run with a list of variables as arguments), any failing 5334f07771ccSwdenk command will cause "run" to terminate, i. e. the remaining 5335f07771ccSwdenk variables are not executed. 5336f07771ccSwdenk 5337c609719bSwdenkNote for Redundant Ethernet Interfaces: 5338c609719bSwdenk======================================= 5339c609719bSwdenk 534011ccc33fSMarcel ZiswilerSome boards come with redundant Ethernet interfaces; U-Boot supports 5341c609719bSwdenksuch configurations and is capable of automatic selection of a 53427152b1d0Swdenk"working" interface when needed. MAC assignment works as follows: 5343c609719bSwdenk 5344c609719bSwdenkNetwork interfaces are numbered eth0, eth1, eth2, ... Corresponding 5345c609719bSwdenkMAC addresses can be stored in the environment as "ethaddr" (=>eth0), 5346c609719bSwdenk"eth1addr" (=>eth1), "eth2addr", ... 5347c609719bSwdenk 5348c609719bSwdenkIf the network interface stores some valid MAC address (for instance 5349c609719bSwdenkin SROM), this is used as default address if there is NO correspon- 5350c609719bSwdenkding setting in the environment; if the corresponding environment 5351c609719bSwdenkvariable is set, this overrides the settings in the card; that means: 5352c609719bSwdenk 5353c609719bSwdenko If the SROM has a valid MAC address, and there is no address in the 5354c609719bSwdenk environment, the SROM's address is used. 5355c609719bSwdenk 5356c609719bSwdenko If there is no valid address in the SROM, and a definition in the 5357c609719bSwdenk environment exists, then the value from the environment variable is 5358c609719bSwdenk used. 5359c609719bSwdenk 5360c609719bSwdenko If both the SROM and the environment contain a MAC address, and 5361c609719bSwdenk both addresses are the same, this MAC address is used. 5362c609719bSwdenk 5363c609719bSwdenko If both the SROM and the environment contain a MAC address, and the 5364c609719bSwdenk addresses differ, the value from the environment is used and a 5365c609719bSwdenk warning is printed. 5366c609719bSwdenk 5367c609719bSwdenko If neither SROM nor the environment contain a MAC address, an error 5368c609719bSwdenk is raised. 5369c609719bSwdenk 5370ecee9324SBen WarrenIf Ethernet drivers implement the 'write_hwaddr' function, valid MAC addresses 5371ecee9324SBen Warrenwill be programmed into hardware as part of the initialization process. This 5372ecee9324SBen Warrenmay be skipped by setting the appropriate 'ethmacskip' environment variable. 5373ecee9324SBen WarrenThe naming convention is as follows: 5374ecee9324SBen Warren"ethmacskip" (=>eth0), "eth1macskip" (=>eth1) etc. 5375c609719bSwdenk 5376c609719bSwdenkImage Formats: 5377c609719bSwdenk============== 5378c609719bSwdenk 53793310c549SMarian BalakowiczU-Boot is capable of booting (and performing other auxiliary operations on) 53803310c549SMarian Balakowiczimages in two formats: 53813310c549SMarian Balakowicz 53823310c549SMarian BalakowiczNew uImage format (FIT) 53833310c549SMarian Balakowicz----------------------- 53843310c549SMarian Balakowicz 53853310c549SMarian BalakowiczFlexible and powerful format based on Flattened Image Tree -- FIT (similar 53863310c549SMarian Balakowiczto Flattened Device Tree). It allows the use of images with multiple 53873310c549SMarian Balakowiczcomponents (several kernels, ramdisks, etc.), with contents protected by 53883310c549SMarian BalakowiczSHA1, MD5 or CRC32. More details are found in the doc/uImage.FIT directory. 53893310c549SMarian Balakowicz 53903310c549SMarian Balakowicz 53913310c549SMarian BalakowiczOld uImage format 53923310c549SMarian Balakowicz----------------- 53933310c549SMarian Balakowicz 53943310c549SMarian BalakowiczOld image format is based on binary files which can be basically anything, 53953310c549SMarian Balakowiczpreceded by a special header; see the definitions in include/image.h for 53963310c549SMarian Balakowiczdetails; basically, the header defines the following image properties: 5397c609719bSwdenk 5398c609719bSwdenk* Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD, 5399c609719bSwdenk 4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks, 5400f5ed9e39SPeter Tyser LynxOS, pSOS, QNX, RTEMS, INTEGRITY; 5401f5ed9e39SPeter Tyser Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS, 5402f5ed9e39SPeter Tyser INTEGRITY). 54037b64fef3SWolfgang Denk* Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86, 5404afc1ce82SMacpaul Lin IA64, MIPS, NDS32, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit; 5405afc1ce82SMacpaul Lin Currently supported: ARM, AVR32, Intel x86, MIPS, NDS32, Nios II, PowerPC). 5406c29fdfc1Swdenk* Compression Type (uncompressed, gzip, bzip2) 5407c609719bSwdenk* Load Address 5408c609719bSwdenk* Entry Point 5409c609719bSwdenk* Image Name 5410c609719bSwdenk* Image Timestamp 5411c609719bSwdenk 5412c609719bSwdenkThe header is marked by a special Magic Number, and both the header 5413c609719bSwdenkand the data portions of the image are secured against corruption by 5414c609719bSwdenkCRC32 checksums. 5415c609719bSwdenk 5416c609719bSwdenk 5417c609719bSwdenkLinux Support: 5418c609719bSwdenk============== 5419c609719bSwdenk 5420c609719bSwdenkAlthough U-Boot should support any OS or standalone application 54217152b1d0Swdenkeasily, the main focus has always been on Linux during the design of 5422c609719bSwdenkU-Boot. 5423c609719bSwdenk 5424c609719bSwdenkU-Boot includes many features that so far have been part of some 5425c609719bSwdenkspecial "boot loader" code within the Linux kernel. Also, any 5426c609719bSwdenk"initrd" images to be used are no longer part of one big Linux image; 5427c609719bSwdenkinstead, kernel and "initrd" are separate images. This implementation 54287152b1d0Swdenkserves several purposes: 5429c609719bSwdenk 5430c609719bSwdenk- the same features can be used for other OS or standalone 5431c609719bSwdenk applications (for instance: using compressed images to reduce the 5432c609719bSwdenk Flash memory footprint) 5433c609719bSwdenk 5434c609719bSwdenk- it becomes much easier to port new Linux kernel versions because 54357152b1d0Swdenk lots of low-level, hardware dependent stuff are done by U-Boot 5436c609719bSwdenk 5437c609719bSwdenk- the same Linux kernel image can now be used with different "initrd" 5438c609719bSwdenk images; of course this also means that different kernel images can 5439c609719bSwdenk be run with the same "initrd". This makes testing easier (you don't 5440c609719bSwdenk have to build a new "zImage.initrd" Linux image when you just 5441c609719bSwdenk change a file in your "initrd"). Also, a field-upgrade of the 5442c609719bSwdenk software is easier now. 5443c609719bSwdenk 5444c609719bSwdenk 5445c609719bSwdenkLinux HOWTO: 5446c609719bSwdenk============ 5447c609719bSwdenk 5448c609719bSwdenkPorting Linux to U-Boot based systems: 5449c609719bSwdenk--------------------------------------- 5450c609719bSwdenk 5451c609719bSwdenkU-Boot cannot save you from doing all the necessary modifications to 5452c609719bSwdenkconfigure the Linux device drivers for use with your target hardware 5453c609719bSwdenk(no, we don't intend to provide a full virtual machine interface to 5454c609719bSwdenkLinux :-). 5455c609719bSwdenk 5456a47a12beSStefan RoeseBut now you can ignore ALL boot loader code (in arch/powerpc/mbxboot). 5457c609719bSwdenk 5458c609719bSwdenkJust make sure your machine specific header file (for instance 5459c609719bSwdenkinclude/asm-ppc/tqm8xx.h) includes the same definition of the Board 54601dc30693SMarkus HeidelbergInformation structure as we define in include/asm-<arch>/u-boot.h, 54611dc30693SMarkus Heidelbergand make sure that your definition of IMAP_ADDR uses the same value 54626d0f6bcfSJean-Christophe PLAGNIOL-VILLARDas your U-Boot configuration in CONFIG_SYS_IMMR. 5463c609719bSwdenk 54642eb31b13SSimon GlassNote that U-Boot now has a driver model, a unified model for drivers. 54652eb31b13SSimon GlassIf you are adding a new driver, plumb it into driver model. If there 54662eb31b13SSimon Glassis no uclass available, you are encouraged to create one. See 54672eb31b13SSimon Glassdoc/driver-model. 54682eb31b13SSimon Glass 5469c609719bSwdenk 5470c609719bSwdenkConfiguring the Linux kernel: 5471c609719bSwdenk----------------------------- 5472c609719bSwdenk 5473c609719bSwdenkNo specific requirements for U-Boot. Make sure you have some root 5474c609719bSwdenkdevice (initial ramdisk, NFS) for your target system. 5475c609719bSwdenk 5476c609719bSwdenk 5477c609719bSwdenkBuilding a Linux Image: 5478c609719bSwdenk----------------------- 5479c609719bSwdenk 548024ee89b9SwdenkWith U-Boot, "normal" build targets like "zImage" or "bzImage" are 548124ee89b9Swdenknot used. If you use recent kernel source, a new build target 548224ee89b9Swdenk"uImage" will exist which automatically builds an image usable by 548324ee89b9SwdenkU-Boot. Most older kernels also have support for a "pImage" target, 548424ee89b9Swdenkwhich was introduced for our predecessor project PPCBoot and uses a 548524ee89b9Swdenk100% compatible format. 5486c609719bSwdenk 5487c609719bSwdenkExample: 5488c609719bSwdenk 5489c609719bSwdenk make TQM850L_config 5490c609719bSwdenk make oldconfig 5491c609719bSwdenk make dep 549224ee89b9Swdenk make uImage 5493c609719bSwdenk 549424ee89b9SwdenkThe "uImage" build target uses a special tool (in 'tools/mkimage') to 549524ee89b9Swdenkencapsulate a compressed Linux kernel image with header information, 549624ee89b9SwdenkCRC32 checksum etc. for use with U-Boot. This is what we are doing: 5497c609719bSwdenk 549824ee89b9Swdenk* build a standard "vmlinux" kernel image (in ELF binary format): 549924ee89b9Swdenk 550024ee89b9Swdenk* convert the kernel into a raw binary image: 550124ee89b9Swdenk 550224ee89b9Swdenk ${CROSS_COMPILE}-objcopy -O binary \ 550324ee89b9Swdenk -R .note -R .comment \ 550424ee89b9Swdenk -S vmlinux linux.bin 550524ee89b9Swdenk 550624ee89b9Swdenk* compress the binary image: 550724ee89b9Swdenk 550824ee89b9Swdenk gzip -9 linux.bin 550924ee89b9Swdenk 551024ee89b9Swdenk* package compressed binary image for U-Boot: 551124ee89b9Swdenk 551224ee89b9Swdenk mkimage -A ppc -O linux -T kernel -C gzip \ 551324ee89b9Swdenk -a 0 -e 0 -n "Linux Kernel Image" \ 551424ee89b9Swdenk -d linux.bin.gz uImage 551524ee89b9Swdenk 551624ee89b9Swdenk 551724ee89b9SwdenkThe "mkimage" tool can also be used to create ramdisk images for use 551824ee89b9Swdenkwith U-Boot, either separated from the Linux kernel image, or 551924ee89b9Swdenkcombined into one file. "mkimage" encapsulates the images with a 64 552024ee89b9Swdenkbyte header containing information about target architecture, 552124ee89b9Swdenkoperating system, image type, compression method, entry points, time 552224ee89b9Swdenkstamp, CRC32 checksums, etc. 552324ee89b9Swdenk 552424ee89b9Swdenk"mkimage" can be called in two ways: to verify existing images and 552524ee89b9Swdenkprint the header information, or to build new images. 5526c609719bSwdenk 5527c609719bSwdenkIn the first form (with "-l" option) mkimage lists the information 5528c609719bSwdenkcontained in the header of an existing U-Boot image; this includes 5529c609719bSwdenkchecksum verification: 5530c609719bSwdenk 5531c609719bSwdenk tools/mkimage -l image 5532c609719bSwdenk -l ==> list image header information 5533c609719bSwdenk 5534c609719bSwdenkThe second form (with "-d" option) is used to build a U-Boot image 5535c609719bSwdenkfrom a "data file" which is used as image payload: 5536c609719bSwdenk 5537c609719bSwdenk tools/mkimage -A arch -O os -T type -C comp -a addr -e ep \ 5538c609719bSwdenk -n name -d data_file image 5539c609719bSwdenk -A ==> set architecture to 'arch' 5540c609719bSwdenk -O ==> set operating system to 'os' 5541c609719bSwdenk -T ==> set image type to 'type' 5542c609719bSwdenk -C ==> set compression type 'comp' 5543c609719bSwdenk -a ==> set load address to 'addr' (hex) 5544c609719bSwdenk -e ==> set entry point to 'ep' (hex) 5545c609719bSwdenk -n ==> set image name to 'name' 5546c609719bSwdenk -d ==> use image data from 'datafile' 5547c609719bSwdenk 554869459791SwdenkRight now, all Linux kernels for PowerPC systems use the same load 554969459791Swdenkaddress (0x00000000), but the entry point address depends on the 555069459791Swdenkkernel version: 5551c609719bSwdenk 5552c609719bSwdenk- 2.2.x kernels have the entry point at 0x0000000C, 555324ee89b9Swdenk- 2.3.x and later kernels have the entry point at 0x00000000. 5554c609719bSwdenk 5555c609719bSwdenkSo a typical call to build a U-Boot image would read: 5556c609719bSwdenk 555724ee89b9Swdenk -> tools/mkimage -n '2.4.4 kernel for TQM850L' \ 555824ee89b9Swdenk > -A ppc -O linux -T kernel -C gzip -a 0 -e 0 \ 5559a47a12beSStefan Roese > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz \ 556024ee89b9Swdenk > examples/uImage.TQM850L 556124ee89b9Swdenk Image Name: 2.4.4 kernel for TQM850L 5562c609719bSwdenk Created: Wed Jul 19 02:34:59 2000 5563c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 5564c609719bSwdenk Data Size: 335725 Bytes = 327.86 kB = 0.32 MB 5565c609719bSwdenk Load Address: 0x00000000 556624ee89b9Swdenk Entry Point: 0x00000000 5567c609719bSwdenk 5568c609719bSwdenkTo verify the contents of the image (or check for corruption): 5569c609719bSwdenk 557024ee89b9Swdenk -> tools/mkimage -l examples/uImage.TQM850L 557124ee89b9Swdenk Image Name: 2.4.4 kernel for TQM850L 5572c609719bSwdenk Created: Wed Jul 19 02:34:59 2000 5573c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 5574c609719bSwdenk Data Size: 335725 Bytes = 327.86 kB = 0.32 MB 5575c609719bSwdenk Load Address: 0x00000000 557624ee89b9Swdenk Entry Point: 0x00000000 5577c609719bSwdenk 5578c609719bSwdenkNOTE: for embedded systems where boot time is critical you can trade 5579c609719bSwdenkspeed for memory and install an UNCOMPRESSED image instead: this 5580c609719bSwdenkneeds more space in Flash, but boots much faster since it does not 5581c609719bSwdenkneed to be uncompressed: 5582c609719bSwdenk 5583a47a12beSStefan Roese -> gunzip /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz 558424ee89b9Swdenk -> tools/mkimage -n '2.4.4 kernel for TQM850L' \ 558524ee89b9Swdenk > -A ppc -O linux -T kernel -C none -a 0 -e 0 \ 5586a47a12beSStefan Roese > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux \ 558724ee89b9Swdenk > examples/uImage.TQM850L-uncompressed 558824ee89b9Swdenk Image Name: 2.4.4 kernel for TQM850L 5589c609719bSwdenk Created: Wed Jul 19 02:34:59 2000 5590c609719bSwdenk Image Type: PowerPC Linux Kernel Image (uncompressed) 5591c609719bSwdenk Data Size: 792160 Bytes = 773.59 kB = 0.76 MB 5592c609719bSwdenk Load Address: 0x00000000 559324ee89b9Swdenk Entry Point: 0x00000000 5594c609719bSwdenk 5595c609719bSwdenk 5596c609719bSwdenkSimilar you can build U-Boot images from a 'ramdisk.image.gz' file 5597c609719bSwdenkwhen your kernel is intended to use an initial ramdisk: 5598c609719bSwdenk 5599c609719bSwdenk -> tools/mkimage -n 'Simple Ramdisk Image' \ 5600c609719bSwdenk > -A ppc -O linux -T ramdisk -C gzip \ 5601c609719bSwdenk > -d /LinuxPPC/images/SIMPLE-ramdisk.image.gz examples/simple-initrd 5602c609719bSwdenk Image Name: Simple Ramdisk Image 5603c609719bSwdenk Created: Wed Jan 12 14:01:50 2000 5604c609719bSwdenk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) 5605c609719bSwdenk Data Size: 566530 Bytes = 553.25 kB = 0.54 MB 5606c609719bSwdenk Load Address: 0x00000000 5607c609719bSwdenk Entry Point: 0x00000000 5608c609719bSwdenk 5609a804b5ceSGuilherme Maciel FerreiraThe "dumpimage" is a tool to disassemble images built by mkimage. Its "-i" 5610a804b5ceSGuilherme Maciel Ferreiraoption performs the converse operation of the mkimage's second form (the "-d" 5611a804b5ceSGuilherme Maciel Ferreiraoption). Given an image built by mkimage, the dumpimage extracts a "data file" 5612a804b5ceSGuilherme Maciel Ferreirafrom the image: 5613a804b5ceSGuilherme Maciel Ferreira 5614a804b5ceSGuilherme Maciel Ferreira tools/dumpimage -i image -p position data_file 5615a804b5ceSGuilherme Maciel Ferreira -i ==> extract from the 'image' a specific 'data_file', \ 5616a804b5ceSGuilherme Maciel Ferreira indexed by 'position' 5617a804b5ceSGuilherme Maciel Ferreira 5618c609719bSwdenk 5619c609719bSwdenkInstalling a Linux Image: 5620c609719bSwdenk------------------------- 5621c609719bSwdenk 5622c609719bSwdenkTo downloading a U-Boot image over the serial (console) interface, 5623c609719bSwdenkyou must convert the image to S-Record format: 5624c609719bSwdenk 5625c609719bSwdenk objcopy -I binary -O srec examples/image examples/image.srec 5626c609719bSwdenk 5627c609719bSwdenkThe 'objcopy' does not understand the information in the U-Boot 5628c609719bSwdenkimage header, so the resulting S-Record file will be relative to 5629c609719bSwdenkaddress 0x00000000. To load it to a given address, you need to 5630c609719bSwdenkspecify the target address as 'offset' parameter with the 'loads' 5631c609719bSwdenkcommand. 5632c609719bSwdenk 5633c609719bSwdenkExample: install the image to address 0x40100000 (which on the 5634c609719bSwdenkTQM8xxL is in the first Flash bank): 5635c609719bSwdenk 5636c609719bSwdenk => erase 40100000 401FFFFF 5637c609719bSwdenk 5638c609719bSwdenk .......... done 5639c609719bSwdenk Erased 8 sectors 5640c609719bSwdenk 5641c609719bSwdenk => loads 40100000 5642c609719bSwdenk ## Ready for S-Record download ... 5643c609719bSwdenk ~>examples/image.srec 5644c609719bSwdenk 1 2 3 4 5 6 7 8 9 10 11 12 13 ... 5645c609719bSwdenk ... 5646c609719bSwdenk 15989 15990 15991 15992 5647c609719bSwdenk [file transfer complete] 5648c609719bSwdenk [connected] 5649c609719bSwdenk ## Start Addr = 0x00000000 5650c609719bSwdenk 5651c609719bSwdenk 5652c609719bSwdenkYou can check the success of the download using the 'iminfo' command; 5653c609719bSwdenkthis includes a checksum verification so you can be sure no data 5654c609719bSwdenkcorruption happened: 5655c609719bSwdenk 5656c609719bSwdenk => imi 40100000 5657c609719bSwdenk 5658c609719bSwdenk ## Checking Image at 40100000 ... 5659c609719bSwdenk Image Name: 2.2.13 for initrd on TQM850L 5660c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 5661c609719bSwdenk Data Size: 335725 Bytes = 327 kB = 0 MB 5662c609719bSwdenk Load Address: 00000000 5663c609719bSwdenk Entry Point: 0000000c 5664c609719bSwdenk Verifying Checksum ... OK 5665c609719bSwdenk 5666c609719bSwdenk 5667c609719bSwdenkBoot Linux: 5668c609719bSwdenk----------- 5669c609719bSwdenk 5670c609719bSwdenkThe "bootm" command is used to boot an application that is stored in 5671c609719bSwdenkmemory (RAM or Flash). In case of a Linux kernel image, the contents 5672c609719bSwdenkof the "bootargs" environment variable is passed to the kernel as 5673c609719bSwdenkparameters. You can check and modify this variable using the 5674c609719bSwdenk"printenv" and "setenv" commands: 5675c609719bSwdenk 5676c609719bSwdenk 5677c609719bSwdenk => printenv bootargs 5678c609719bSwdenk bootargs=root=/dev/ram 5679c609719bSwdenk 5680c609719bSwdenk => setenv bootargs root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 5681c609719bSwdenk 5682c609719bSwdenk => printenv bootargs 5683c609719bSwdenk bootargs=root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 5684c609719bSwdenk 5685c609719bSwdenk => bootm 40020000 5686c609719bSwdenk ## Booting Linux kernel at 40020000 ... 5687c609719bSwdenk Image Name: 2.2.13 for NFS on TQM850L 5688c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 5689c609719bSwdenk Data Size: 381681 Bytes = 372 kB = 0 MB 5690c609719bSwdenk Load Address: 00000000 5691c609719bSwdenk Entry Point: 0000000c 5692c609719bSwdenk Verifying Checksum ... OK 5693c609719bSwdenk Uncompressing Kernel Image ... OK 5694c609719bSwdenk Linux version 2.2.13 (wd@denx.local.net) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 19 02:35:17 MEST 2000 5695c609719bSwdenk Boot arguments: root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 5696c609719bSwdenk time_init: decrementer frequency = 187500000/60 5697c609719bSwdenk Calibrating delay loop... 49.77 BogoMIPS 5698c609719bSwdenk Memory: 15208k available (700k kernel code, 444k data, 32k init) [c0000000,c1000000] 5699c609719bSwdenk ... 5700c609719bSwdenk 570111ccc33fSMarcel ZiswilerIf you want to boot a Linux kernel with initial RAM disk, you pass 57027152b1d0Swdenkthe memory addresses of both the kernel and the initrd image (PPBCOOT 5703c609719bSwdenkformat!) to the "bootm" command: 5704c609719bSwdenk 5705c609719bSwdenk => imi 40100000 40200000 5706c609719bSwdenk 5707c609719bSwdenk ## Checking Image at 40100000 ... 5708c609719bSwdenk Image Name: 2.2.13 for initrd on TQM850L 5709c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 5710c609719bSwdenk Data Size: 335725 Bytes = 327 kB = 0 MB 5711c609719bSwdenk Load Address: 00000000 5712c609719bSwdenk Entry Point: 0000000c 5713c609719bSwdenk Verifying Checksum ... OK 5714c609719bSwdenk 5715c609719bSwdenk ## Checking Image at 40200000 ... 5716c609719bSwdenk Image Name: Simple Ramdisk Image 5717c609719bSwdenk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) 5718c609719bSwdenk Data Size: 566530 Bytes = 553 kB = 0 MB 5719c609719bSwdenk Load Address: 00000000 5720c609719bSwdenk Entry Point: 00000000 5721c609719bSwdenk Verifying Checksum ... OK 5722c609719bSwdenk 5723c609719bSwdenk => bootm 40100000 40200000 5724c609719bSwdenk ## Booting Linux kernel at 40100000 ... 5725c609719bSwdenk Image Name: 2.2.13 for initrd on TQM850L 5726c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 5727c609719bSwdenk Data Size: 335725 Bytes = 327 kB = 0 MB 5728c609719bSwdenk Load Address: 00000000 5729c609719bSwdenk Entry Point: 0000000c 5730c609719bSwdenk Verifying Checksum ... OK 5731c609719bSwdenk Uncompressing Kernel Image ... OK 5732c609719bSwdenk ## Loading RAMDisk Image at 40200000 ... 5733c609719bSwdenk Image Name: Simple Ramdisk Image 5734c609719bSwdenk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) 5735c609719bSwdenk Data Size: 566530 Bytes = 553 kB = 0 MB 5736c609719bSwdenk Load Address: 00000000 5737c609719bSwdenk Entry Point: 00000000 5738c609719bSwdenk Verifying Checksum ... OK 5739c609719bSwdenk Loading Ramdisk ... OK 5740c609719bSwdenk Linux version 2.2.13 (wd@denx.local.net) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 19 02:32:08 MEST 2000 5741c609719bSwdenk Boot arguments: root=/dev/ram 5742c609719bSwdenk time_init: decrementer frequency = 187500000/60 5743c609719bSwdenk Calibrating delay loop... 49.77 BogoMIPS 5744c609719bSwdenk ... 5745c609719bSwdenk RAMDISK: Compressed image found at block 0 5746c609719bSwdenk VFS: Mounted root (ext2 filesystem). 5747c609719bSwdenk 5748c609719bSwdenk bash# 5749c609719bSwdenk 57500267768eSMatthew McClintockBoot Linux and pass a flat device tree: 57510267768eSMatthew McClintock----------- 57520267768eSMatthew McClintock 57530267768eSMatthew McClintockFirst, U-Boot must be compiled with the appropriate defines. See the section 57540267768eSMatthew McClintocktitled "Linux Kernel Interface" above for a more in depth explanation. The 57550267768eSMatthew McClintockfollowing is an example of how to start a kernel and pass an updated 57560267768eSMatthew McClintockflat device tree: 57570267768eSMatthew McClintock 57580267768eSMatthew McClintock=> print oftaddr 57590267768eSMatthew McClintockoftaddr=0x300000 57600267768eSMatthew McClintock=> print oft 57610267768eSMatthew McClintockoft=oftrees/mpc8540ads.dtb 57620267768eSMatthew McClintock=> tftp $oftaddr $oft 57630267768eSMatthew McClintockSpeed: 1000, full duplex 57640267768eSMatthew McClintockUsing TSEC0 device 57650267768eSMatthew McClintockTFTP from server 192.168.1.1; our IP address is 192.168.1.101 57660267768eSMatthew McClintockFilename 'oftrees/mpc8540ads.dtb'. 57670267768eSMatthew McClintockLoad address: 0x300000 57680267768eSMatthew McClintockLoading: # 57690267768eSMatthew McClintockdone 57700267768eSMatthew McClintockBytes transferred = 4106 (100a hex) 57710267768eSMatthew McClintock=> tftp $loadaddr $bootfile 57720267768eSMatthew McClintockSpeed: 1000, full duplex 57730267768eSMatthew McClintockUsing TSEC0 device 57740267768eSMatthew McClintockTFTP from server 192.168.1.1; our IP address is 192.168.1.2 57750267768eSMatthew McClintockFilename 'uImage'. 57760267768eSMatthew McClintockLoad address: 0x200000 57770267768eSMatthew McClintockLoading:############ 57780267768eSMatthew McClintockdone 57790267768eSMatthew McClintockBytes transferred = 1029407 (fb51f hex) 57800267768eSMatthew McClintock=> print loadaddr 57810267768eSMatthew McClintockloadaddr=200000 57820267768eSMatthew McClintock=> print oftaddr 57830267768eSMatthew McClintockoftaddr=0x300000 57840267768eSMatthew McClintock=> bootm $loadaddr - $oftaddr 57850267768eSMatthew McClintock## Booting image at 00200000 ... 57860267768eSMatthew McClintock Image Name: Linux-2.6.17-dirty 57870267768eSMatthew McClintock Image Type: PowerPC Linux Kernel Image (gzip compressed) 57880267768eSMatthew McClintock Data Size: 1029343 Bytes = 1005.2 kB 57890267768eSMatthew McClintock Load Address: 00000000 57900267768eSMatthew McClintock Entry Point: 00000000 57910267768eSMatthew McClintock Verifying Checksum ... OK 57920267768eSMatthew McClintock Uncompressing Kernel Image ... OK 57930267768eSMatthew McClintockBooting using flat device tree at 0x300000 57940267768eSMatthew McClintockUsing MPC85xx ADS machine description 57950267768eSMatthew McClintockMemory CAM mapping: CAM0=256Mb, CAM1=256Mb, CAM2=0Mb residual: 0Mb 57960267768eSMatthew McClintock[snip] 57970267768eSMatthew McClintock 57980267768eSMatthew McClintock 57996069ff26SwdenkMore About U-Boot Image Types: 58006069ff26Swdenk------------------------------ 58016069ff26Swdenk 58026069ff26SwdenkU-Boot supports the following image types: 58036069ff26Swdenk 58046069ff26Swdenk "Standalone Programs" are directly runnable in the environment 58056069ff26Swdenk provided by U-Boot; it is expected that (if they behave 58066069ff26Swdenk well) you can continue to work in U-Boot after return from 58076069ff26Swdenk the Standalone Program. 58086069ff26Swdenk "OS Kernel Images" are usually images of some Embedded OS which 58096069ff26Swdenk will take over control completely. Usually these programs 58106069ff26Swdenk will install their own set of exception handlers, device 58116069ff26Swdenk drivers, set up the MMU, etc. - this means, that you cannot 58126069ff26Swdenk expect to re-enter U-Boot except by resetting the CPU. 58136069ff26Swdenk "RAMDisk Images" are more or less just data blocks, and their 58146069ff26Swdenk parameters (address, size) are passed to an OS kernel that is 58156069ff26Swdenk being started. 58166069ff26Swdenk "Multi-File Images" contain several images, typically an OS 58176069ff26Swdenk (Linux) kernel image and one or more data images like 58186069ff26Swdenk RAMDisks. This construct is useful for instance when you want 58196069ff26Swdenk to boot over the network using BOOTP etc., where the boot 58206069ff26Swdenk server provides just a single image file, but you want to get 58216069ff26Swdenk for instance an OS kernel and a RAMDisk image. 58226069ff26Swdenk 58236069ff26Swdenk "Multi-File Images" start with a list of image sizes, each 58246069ff26Swdenk image size (in bytes) specified by an "uint32_t" in network 58256069ff26Swdenk byte order. This list is terminated by an "(uint32_t)0". 58266069ff26Swdenk Immediately after the terminating 0 follow the images, one by 58276069ff26Swdenk one, all aligned on "uint32_t" boundaries (size rounded up to 58286069ff26Swdenk a multiple of 4 bytes). 58296069ff26Swdenk 58306069ff26Swdenk "Firmware Images" are binary images containing firmware (like 58316069ff26Swdenk U-Boot or FPGA images) which usually will be programmed to 58326069ff26Swdenk flash memory. 58336069ff26Swdenk 58346069ff26Swdenk "Script files" are command sequences that will be executed by 58356069ff26Swdenk U-Boot's command interpreter; this feature is especially 58366069ff26Swdenk useful when you configure U-Boot to use a real shell (hush) 58376069ff26Swdenk as command interpreter. 58386069ff26Swdenk 583944f074c7SMarek VasutBooting the Linux zImage: 584044f074c7SMarek Vasut------------------------- 584144f074c7SMarek Vasut 584244f074c7SMarek VasutOn some platforms, it's possible to boot Linux zImage. This is done 584344f074c7SMarek Vasutusing the "bootz" command. The syntax of "bootz" command is the same 584444f074c7SMarek Vasutas the syntax of "bootm" command. 584544f074c7SMarek Vasut 58468ac28563STom RiniNote, defining the CONFIG_SUPPORT_RAW_INITRD allows user to supply 5847017e1f3fSMarek Vasutkernel with raw initrd images. The syntax is slightly different, the 5848017e1f3fSMarek Vasutaddress of the initrd must be augmented by it's size, in the following 5849017e1f3fSMarek Vasutformat: "<initrd addres>:<initrd size>". 5850017e1f3fSMarek Vasut 5851c609719bSwdenk 5852c609719bSwdenkStandalone HOWTO: 5853c609719bSwdenk================= 5854c609719bSwdenk 5855c609719bSwdenkOne of the features of U-Boot is that you can dynamically load and 5856c609719bSwdenkrun "standalone" applications, which can use some resources of 5857c609719bSwdenkU-Boot like console I/O functions or interrupt services. 5858c609719bSwdenk 5859c609719bSwdenkTwo simple examples are included with the sources: 5860c609719bSwdenk 5861c609719bSwdenk"Hello World" Demo: 5862c609719bSwdenk------------------- 5863c609719bSwdenk 5864c609719bSwdenk'examples/hello_world.c' contains a small "Hello World" Demo 5865c609719bSwdenkapplication; it is automatically compiled when you build U-Boot. 5866c609719bSwdenkIt's configured to run at address 0x00040004, so you can play with it 5867c609719bSwdenklike that: 5868c609719bSwdenk 5869c609719bSwdenk => loads 5870c609719bSwdenk ## Ready for S-Record download ... 5871c609719bSwdenk ~>examples/hello_world.srec 5872c609719bSwdenk 1 2 3 4 5 6 7 8 9 10 11 ... 5873c609719bSwdenk [file transfer complete] 5874c609719bSwdenk [connected] 5875c609719bSwdenk ## Start Addr = 0x00040004 5876c609719bSwdenk 5877c609719bSwdenk => go 40004 Hello World! This is a test. 5878c609719bSwdenk ## Starting application at 0x00040004 ... 5879c609719bSwdenk Hello World 5880c609719bSwdenk argc = 7 5881c609719bSwdenk argv[0] = "40004" 5882c609719bSwdenk argv[1] = "Hello" 5883c609719bSwdenk argv[2] = "World!" 5884c609719bSwdenk argv[3] = "This" 5885c609719bSwdenk argv[4] = "is" 5886c609719bSwdenk argv[5] = "a" 5887c609719bSwdenk argv[6] = "test." 5888c609719bSwdenk argv[7] = "<NULL>" 5889c609719bSwdenk Hit any key to exit ... 5890c609719bSwdenk 5891c609719bSwdenk ## Application terminated, rc = 0x0 5892c609719bSwdenk 5893c609719bSwdenkAnother example, which demonstrates how to register a CPM interrupt 5894c609719bSwdenkhandler with the U-Boot code, can be found in 'examples/timer.c'. 5895c609719bSwdenkHere, a CPM timer is set up to generate an interrupt every second. 5896c609719bSwdenkThe interrupt service routine is trivial, just printing a '.' 5897c609719bSwdenkcharacter, but this is just a demo program. The application can be 5898c609719bSwdenkcontrolled by the following keys: 5899c609719bSwdenk 5900c609719bSwdenk ? - print current values og the CPM Timer registers 5901c609719bSwdenk b - enable interrupts and start timer 5902c609719bSwdenk e - stop timer and disable interrupts 5903c609719bSwdenk q - quit application 5904c609719bSwdenk 5905c609719bSwdenk => loads 5906c609719bSwdenk ## Ready for S-Record download ... 5907c609719bSwdenk ~>examples/timer.srec 5908c609719bSwdenk 1 2 3 4 5 6 7 8 9 10 11 ... 5909c609719bSwdenk [file transfer complete] 5910c609719bSwdenk [connected] 5911c609719bSwdenk ## Start Addr = 0x00040004 5912c609719bSwdenk 5913c609719bSwdenk => go 40004 5914c609719bSwdenk ## Starting application at 0x00040004 ... 5915c609719bSwdenk TIMERS=0xfff00980 5916c609719bSwdenk Using timer 1 5917c609719bSwdenk tgcr @ 0xfff00980, tmr @ 0xfff00990, trr @ 0xfff00994, tcr @ 0xfff00998, tcn @ 0xfff0099c, ter @ 0xfff009b0 5918c609719bSwdenk 5919c609719bSwdenkHit 'b': 5920c609719bSwdenk [q, b, e, ?] Set interval 1000000 us 5921c609719bSwdenk Enabling timer 5922c609719bSwdenkHit '?': 5923c609719bSwdenk [q, b, e, ?] ........ 5924c609719bSwdenk tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0xef6, ter=0x0 5925c609719bSwdenkHit '?': 5926c609719bSwdenk [q, b, e, ?] . 5927c609719bSwdenk tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x2ad4, ter=0x0 5928c609719bSwdenkHit '?': 5929c609719bSwdenk [q, b, e, ?] . 5930c609719bSwdenk tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x1efc, ter=0x0 5931c609719bSwdenkHit '?': 5932c609719bSwdenk [q, b, e, ?] . 5933c609719bSwdenk tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x169d, ter=0x0 5934c609719bSwdenkHit 'e': 5935c609719bSwdenk [q, b, e, ?] ...Stopping timer 5936c609719bSwdenkHit 'q': 5937c609719bSwdenk [q, b, e, ?] ## Application terminated, rc = 0x0 5938c609719bSwdenk 5939c609719bSwdenk 594085ec0bccSwdenkMinicom warning: 594185ec0bccSwdenk================ 594285ec0bccSwdenk 59437152b1d0SwdenkOver time, many people have reported problems when trying to use the 594485ec0bccSwdenk"minicom" terminal emulation program for serial download. I (wd) 594585ec0bccSwdenkconsider minicom to be broken, and recommend not to use it. Under 5946f07771ccSwdenkUnix, I recommend to use C-Kermit for general purpose use (and 594785ec0bccSwdenkespecially for kermit binary protocol download ("loadb" command), and 5948e53515a2SKarl O. Pincuse "cu" for S-Record download ("loads" command). See 5949e53515a2SKarl O. Pinchttp://www.denx.de/wiki/view/DULG/SystemSetup#Section_4.3. 5950e53515a2SKarl O. Pincfor help with kermit. 5951e53515a2SKarl O. Pinc 595285ec0bccSwdenk 595352f52c14SwdenkNevertheless, if you absolutely want to use it try adding this 595452f52c14Swdenkconfiguration to your "File transfer protocols" section: 595552f52c14Swdenk 595652f52c14Swdenk Name Program Name U/D FullScr IO-Red. Multi 595752f52c14Swdenk X kermit /usr/bin/kermit -i -l %l -s Y U Y N N 595852f52c14Swdenk Y kermit /usr/bin/kermit -i -l %l -r N D Y N N 595952f52c14Swdenk 596052f52c14Swdenk 5961c609719bSwdenkNetBSD Notes: 5962c609719bSwdenk============= 5963c609719bSwdenk 5964c609719bSwdenkStarting at version 0.9.2, U-Boot supports NetBSD both as host 5965c609719bSwdenk(build U-Boot) and target system (boots NetBSD/mpc8xx). 5966c609719bSwdenk 5967c609719bSwdenkBuilding requires a cross environment; it is known to work on 5968c609719bSwdenkNetBSD/i386 with the cross-powerpc-netbsd-1.3 package (you will also 5969c609719bSwdenkneed gmake since the Makefiles are not compatible with BSD make). 5970c609719bSwdenkNote that the cross-powerpc package does not install include files; 5971c609719bSwdenkattempting to build U-Boot will fail because <machine/ansi.h> is 5972c609719bSwdenkmissing. This file has to be installed and patched manually: 5973c609719bSwdenk 5974c609719bSwdenk # cd /usr/pkg/cross/powerpc-netbsd/include 5975c609719bSwdenk # mkdir powerpc 5976c609719bSwdenk # ln -s powerpc machine 5977c609719bSwdenk # cp /usr/src/sys/arch/powerpc/include/ansi.h powerpc/ansi.h 5978c609719bSwdenk # ${EDIT} powerpc/ansi.h ## must remove __va_list, _BSD_VA_LIST 5979c609719bSwdenk 5980c609719bSwdenkNative builds *don't* work due to incompatibilities between native 5981c609719bSwdenkand U-Boot include files. 5982c609719bSwdenk 5983c609719bSwdenkBooting assumes that (the first part of) the image booted is a 5984c609719bSwdenkstage-2 loader which in turn loads and then invokes the kernel 5985c609719bSwdenkproper. Loader sources will eventually appear in the NetBSD source 5986c609719bSwdenktree (probably in sys/arc/mpc8xx/stand/u-boot_stage2/); in the 59872a8af187Swdenkmeantime, see ftp://ftp.denx.de/pub/u-boot/ppcboot_stage2.tar.gz 5988c609719bSwdenk 5989c609719bSwdenk 5990c609719bSwdenkImplementation Internals: 5991c609719bSwdenk========================= 5992c609719bSwdenk 5993c609719bSwdenkThe following is not intended to be a complete description of every 5994c609719bSwdenkimplementation detail. However, it should help to understand the 5995c609719bSwdenkinner workings of U-Boot and make it easier to port it to custom 5996c609719bSwdenkhardware. 5997c609719bSwdenk 5998c609719bSwdenk 5999c609719bSwdenkInitial Stack, Global Data: 6000c609719bSwdenk--------------------------- 6001c609719bSwdenk 6002c609719bSwdenkThe implementation of U-Boot is complicated by the fact that U-Boot 6003c609719bSwdenkstarts running out of ROM (flash memory), usually without access to 6004c609719bSwdenksystem RAM (because the memory controller is not initialized yet). 6005c609719bSwdenkThis means that we don't have writable Data or BSS segments, and BSS 6006c609719bSwdenkis not initialized as zero. To be able to get a C environment working 6007c609719bSwdenkat all, we have to allocate at least a minimal stack. Implementation 6008c609719bSwdenkoptions for this are defined and restricted by the CPU used: Some CPU 6009c609719bSwdenkmodels provide on-chip memory (like the IMMR area on MPC8xx and 6010c609719bSwdenkMPC826x processors), on others (parts of) the data cache can be 6011c609719bSwdenklocked as (mis-) used as memory, etc. 6012c609719bSwdenk 60137152b1d0Swdenk Chris Hallinan posted a good summary of these issues to the 60140668236bSWolfgang Denk U-Boot mailing list: 601543d9616cSwdenk 601643d9616cSwdenk Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)? 601743d9616cSwdenk From: "Chris Hallinan" <clh@net1plus.com> 601843d9616cSwdenk Date: Mon, 10 Feb 2003 16:43:46 -0500 (22:43 MET) 601943d9616cSwdenk ... 602043d9616cSwdenk 602143d9616cSwdenk Correct me if I'm wrong, folks, but the way I understand it 602243d9616cSwdenk is this: Using DCACHE as initial RAM for Stack, etc, does not 602343d9616cSwdenk require any physical RAM backing up the cache. The cleverness 602443d9616cSwdenk is that the cache is being used as a temporary supply of 602543d9616cSwdenk necessary storage before the SDRAM controller is setup. It's 602611ccc33fSMarcel Ziswiler beyond the scope of this list to explain the details, but you 602743d9616cSwdenk can see how this works by studying the cache architecture and 602843d9616cSwdenk operation in the architecture and processor-specific manuals. 602943d9616cSwdenk 603043d9616cSwdenk OCM is On Chip Memory, which I believe the 405GP has 4K. It 603143d9616cSwdenk is another option for the system designer to use as an 603211ccc33fSMarcel Ziswiler initial stack/RAM area prior to SDRAM being available. Either 603343d9616cSwdenk option should work for you. Using CS 4 should be fine if your 603443d9616cSwdenk board designers haven't used it for something that would 603543d9616cSwdenk cause you grief during the initial boot! It is frequently not 603643d9616cSwdenk used. 603743d9616cSwdenk 60386d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_INIT_RAM_ADDR should be somewhere that won't interfere 603943d9616cSwdenk with your processor/board/system design. The default value 604043d9616cSwdenk you will find in any recent u-boot distribution in 60418a316c9bSStefan Roese walnut.h should work for you. I'd set it to a value larger 604243d9616cSwdenk than your SDRAM module. If you have a 64MB SDRAM module, set 604343d9616cSwdenk it above 400_0000. Just make sure your board has no resources 604443d9616cSwdenk that are supposed to respond to that address! That code in 604543d9616cSwdenk start.S has been around a while and should work as is when 604643d9616cSwdenk you get the config right. 604743d9616cSwdenk 604843d9616cSwdenk -Chris Hallinan 604943d9616cSwdenk DS4.COM, Inc. 605043d9616cSwdenk 6051c609719bSwdenkIt is essential to remember this, since it has some impact on the C 6052c609719bSwdenkcode for the initialization procedures: 6053c609719bSwdenk 6054c609719bSwdenk* Initialized global data (data segment) is read-only. Do not attempt 6055c609719bSwdenk to write it. 6056c609719bSwdenk 605711ccc33fSMarcel Ziswiler* Do not use any uninitialized global data (or implicitely initialized 6058c609719bSwdenk as zero data - BSS segment) at all - this is undefined, initiali- 60597152b1d0Swdenk zation is performed later (when relocating to RAM). 6060c609719bSwdenk 6061c609719bSwdenk* Stack space is very limited. Avoid big data buffers or things like 6062c609719bSwdenk that. 6063c609719bSwdenk 6064c609719bSwdenkHaving only the stack as writable memory limits means we cannot use 6065c609719bSwdenknormal global data to share information beween the code. But it 6066c609719bSwdenkturned out that the implementation of U-Boot can be greatly 6067c609719bSwdenksimplified by making a global data structure (gd_t) available to all 6068c609719bSwdenkfunctions. We could pass a pointer to this data as argument to _all_ 6069c609719bSwdenkfunctions, but this would bloat the code. Instead we use a feature of 6070c609719bSwdenkthe GCC compiler (Global Register Variables) to share the data: we 6071c609719bSwdenkplace a pointer (gd) to the global data into a register which we 6072c609719bSwdenkreserve for this purpose. 6073c609719bSwdenk 60747152b1d0SwdenkWhen choosing a register for such a purpose we are restricted by the 6075c609719bSwdenkrelevant (E)ABI specifications for the current architecture, and by 6076c609719bSwdenkGCC's implementation. 6077c609719bSwdenk 6078c609719bSwdenkFor PowerPC, the following registers have specific use: 6079c609719bSwdenk R1: stack pointer 6080e7670f6cSWolfgang Denk R2: reserved for system use 6081c609719bSwdenk R3-R4: parameter passing and return values 6082c609719bSwdenk R5-R10: parameter passing 6083c609719bSwdenk R13: small data area pointer 6084c609719bSwdenk R30: GOT pointer 6085c609719bSwdenk R31: frame pointer 6086c609719bSwdenk 6087e6bee808SJoakim Tjernlund (U-Boot also uses R12 as internal GOT pointer. r12 6088e6bee808SJoakim Tjernlund is a volatile register so r12 needs to be reset when 6089e6bee808SJoakim Tjernlund going back and forth between asm and C) 6090c609719bSwdenk 6091e7670f6cSWolfgang Denk ==> U-Boot will use R2 to hold a pointer to the global data 6092c609719bSwdenk 6093c609719bSwdenk Note: on PPC, we could use a static initializer (since the 6094c609719bSwdenk address of the global data structure is known at compile time), 6095c609719bSwdenk but it turned out that reserving a register results in somewhat 6096c609719bSwdenk smaller code - although the code savings are not that big (on 6097c609719bSwdenk average for all boards 752 bytes for the whole U-Boot image, 6098c609719bSwdenk 624 text + 127 data). 6099c609719bSwdenk 6100c4db335cSRobin GetzOn Blackfin, the normal C ABI (except for P3) is followed as documented here: 61014c58eb55SMike Frysinger http://docs.blackfin.uclinux.org/doku.php?id=application_binary_interface 61024c58eb55SMike Frysinger 6103c4db335cSRobin Getz ==> U-Boot will use P3 to hold a pointer to the global data 61044c58eb55SMike Frysinger 6105c609719bSwdenkOn ARM, the following registers are used: 6106c609719bSwdenk 6107c609719bSwdenk R0: function argument word/integer result 6108c609719bSwdenk R1-R3: function argument word 610912eba1b4SJeroen Hofstee R9: platform specific 611012eba1b4SJeroen Hofstee R10: stack limit (used only if stack checking is enabled) 6111c609719bSwdenk R11: argument (frame) pointer 6112c609719bSwdenk R12: temporary workspace 6113c609719bSwdenk R13: stack pointer 6114c609719bSwdenk R14: link register 6115c609719bSwdenk R15: program counter 6116c609719bSwdenk 611712eba1b4SJeroen Hofstee ==> U-Boot will use R9 to hold a pointer to the global data 611812eba1b4SJeroen Hofstee 611912eba1b4SJeroen Hofstee Note: on ARM, only R_ARM_RELATIVE relocations are supported. 6120c609719bSwdenk 61210df01fd3SThomas ChouOn Nios II, the ABI is documented here: 61220df01fd3SThomas Chou http://www.altera.com/literature/hb/nios2/n2cpu_nii51016.pdf 61230df01fd3SThomas Chou 61240df01fd3SThomas Chou ==> U-Boot will use gp to hold a pointer to the global data 61250df01fd3SThomas Chou 61260df01fd3SThomas Chou Note: on Nios II, we give "-G0" option to gcc and don't use gp 61270df01fd3SThomas Chou to access small data sections, so gp is free. 61280df01fd3SThomas Chou 6129afc1ce82SMacpaul LinOn NDS32, the following registers are used: 6130afc1ce82SMacpaul Lin 6131afc1ce82SMacpaul Lin R0-R1: argument/return 6132afc1ce82SMacpaul Lin R2-R5: argument 6133afc1ce82SMacpaul Lin R15: temporary register for assembler 6134afc1ce82SMacpaul Lin R16: trampoline register 6135afc1ce82SMacpaul Lin R28: frame pointer (FP) 6136afc1ce82SMacpaul Lin R29: global pointer (GP) 6137afc1ce82SMacpaul Lin R30: link register (LP) 6138afc1ce82SMacpaul Lin R31: stack pointer (SP) 6139afc1ce82SMacpaul Lin PC: program counter (PC) 6140afc1ce82SMacpaul Lin 6141afc1ce82SMacpaul Lin ==> U-Boot will use R10 to hold a pointer to the global data 6142afc1ce82SMacpaul Lin 6143d87080b7SWolfgang DenkNOTE: DECLARE_GLOBAL_DATA_PTR must be used with file-global scope, 6144d87080b7SWolfgang Denkor current versions of GCC may "optimize" the code too much. 6145c609719bSwdenk 6146c609719bSwdenkMemory Management: 6147c609719bSwdenk------------------ 6148c609719bSwdenk 6149c609719bSwdenkU-Boot runs in system state and uses physical addresses, i.e. the 6150c609719bSwdenkMMU is not used either for address mapping nor for memory protection. 6151c609719bSwdenk 6152c609719bSwdenkThe available memory is mapped to fixed addresses using the memory 6153c609719bSwdenkcontroller. In this process, a contiguous block is formed for each 6154c609719bSwdenkmemory type (Flash, SDRAM, SRAM), even when it consists of several 6155c609719bSwdenkphysical memory banks. 6156c609719bSwdenk 6157c609719bSwdenkU-Boot is installed in the first 128 kB of the first Flash bank (on 6158c609719bSwdenkTQM8xxL modules this is the range 0x40000000 ... 0x4001FFFF). After 6159c609719bSwdenkbooting and sizing and initializing DRAM, the code relocates itself 6160c609719bSwdenkto the upper end of DRAM. Immediately below the U-Boot code some 61616d0f6bcfSJean-Christophe PLAGNIOL-VILLARDmemory is reserved for use by malloc() [see CONFIG_SYS_MALLOC_LEN 6162c609719bSwdenkconfiguration setting]. Below that, a structure with global Board 6163c609719bSwdenkInfo data is placed, followed by the stack (growing downward). 6164c609719bSwdenk 6165c609719bSwdenkAdditionally, some exception handler code is copied to the low 8 kB 6166c609719bSwdenkof DRAM (0x00000000 ... 0x00001FFF). 6167c609719bSwdenk 6168c609719bSwdenkSo a typical memory configuration with 16 MB of DRAM could look like 6169c609719bSwdenkthis: 6170c609719bSwdenk 6171c609719bSwdenk 0x0000 0000 Exception Vector code 6172c609719bSwdenk : 6173c609719bSwdenk 0x0000 1FFF 6174c609719bSwdenk 0x0000 2000 Free for Application Use 6175c609719bSwdenk : 6176c609719bSwdenk : 6177c609719bSwdenk 6178c609719bSwdenk : 6179c609719bSwdenk : 6180c609719bSwdenk 0x00FB FF20 Monitor Stack (Growing downward) 6181c609719bSwdenk 0x00FB FFAC Board Info Data and permanent copy of global data 6182c609719bSwdenk 0x00FC 0000 Malloc Arena 6183c609719bSwdenk : 6184c609719bSwdenk 0x00FD FFFF 6185c609719bSwdenk 0x00FE 0000 RAM Copy of Monitor Code 6186c609719bSwdenk ... eventually: LCD or video framebuffer 6187c609719bSwdenk ... eventually: pRAM (Protected RAM - unchanged by reset) 6188c609719bSwdenk 0x00FF FFFF [End of RAM] 6189c609719bSwdenk 6190c609719bSwdenk 6191c609719bSwdenkSystem Initialization: 6192c609719bSwdenk---------------------- 6193c609719bSwdenk 6194c609719bSwdenkIn the reset configuration, U-Boot starts at the reset entry point 619511ccc33fSMarcel Ziswiler(on most PowerPC systems at address 0x00000100). Because of the reset 6196c609719bSwdenkconfiguration for CS0# this is a mirror of the onboard Flash memory. 61977152b1d0SwdenkTo be able to re-map memory U-Boot then jumps to its link address. 6198c609719bSwdenkTo be able to implement the initialization code in C, a (small!) 6199c609719bSwdenkinitial stack is set up in the internal Dual Ported RAM (in case CPUs 6200c609719bSwdenkwhich provide such a feature like MPC8xx or MPC8260), or in a locked 6201c609719bSwdenkpart of the data cache. After that, U-Boot initializes the CPU core, 6202c609719bSwdenkthe caches and the SIU. 6203c609719bSwdenk 6204c609719bSwdenkNext, all (potentially) available memory banks are mapped using a 6205c609719bSwdenkpreliminary mapping. For example, we put them on 512 MB boundaries 6206c609719bSwdenk(multiples of 0x20000000: SDRAM on 0x00000000 and 0x20000000, Flash 6207c609719bSwdenkon 0x40000000 and 0x60000000, SRAM on 0x80000000). Then UPM A is 6208c609719bSwdenkprogrammed for SDRAM access. Using the temporary configuration, a 6209c609719bSwdenksimple memory test is run that determines the size of the SDRAM 6210c609719bSwdenkbanks. 6211c609719bSwdenk 6212c609719bSwdenkWhen there is more than one SDRAM bank, and the banks are of 62137152b1d0Swdenkdifferent size, the largest is mapped first. For equal size, the first 6214c609719bSwdenkbank (CS2#) is mapped first. The first mapping is always for address 6215c609719bSwdenk0x00000000, with any additional banks following immediately to create 6216c609719bSwdenkcontiguous memory starting from 0. 6217c609719bSwdenk 6218c609719bSwdenkThen, the monitor installs itself at the upper end of the SDRAM area 6219c609719bSwdenkand allocates memory for use by malloc() and for the global Board 6220c609719bSwdenkInfo data; also, the exception vector code is copied to the low RAM 6221c609719bSwdenkpages, and the final stack is set up. 6222c609719bSwdenk 6223c609719bSwdenkOnly after this relocation will you have a "normal" C environment; 6224c609719bSwdenkuntil that you are restricted in several ways, mostly because you are 6225c609719bSwdenkrunning from ROM, and because the code will have to be relocated to a 6226c609719bSwdenknew address in RAM. 6227c609719bSwdenk 6228c609719bSwdenk 6229c609719bSwdenkU-Boot Porting Guide: 6230c609719bSwdenk---------------------- 6231c609719bSwdenk 6232c609719bSwdenk[Based on messages by Jerry Van Baren in the U-Boot-Users mailing 62336aff3115Swdenklist, October 2002] 6234c609719bSwdenk 6235c609719bSwdenk 6236c609719bSwdenkint main(int argc, char *argv[]) 6237c609719bSwdenk{ 6238c609719bSwdenk sighandler_t no_more_time; 6239c609719bSwdenk 6240c609719bSwdenk signal(SIGALRM, no_more_time); 6241c609719bSwdenk alarm(PROJECT_DEADLINE - toSec (3 * WEEK)); 6242c609719bSwdenk 6243c609719bSwdenk if (available_money > available_manpower) { 62446c3fef28SJerry Van Baren Pay consultant to port U-Boot; 6245c609719bSwdenk return 0; 6246c609719bSwdenk } 6247c609719bSwdenk 6248c609719bSwdenk Download latest U-Boot source; 6249c609719bSwdenk 62500668236bSWolfgang Denk Subscribe to u-boot mailing list; 62516aff3115Swdenk 62526c3fef28SJerry Van Baren if (clueless) 6253c609719bSwdenk email("Hi, I am new to U-Boot, how do I get started?"); 6254c609719bSwdenk 6255c609719bSwdenk while (learning) { 6256c609719bSwdenk Read the README file in the top level directory; 62577cb22f97Swdenk Read http://www.denx.de/twiki/bin/view/DULG/Manual; 62586c3fef28SJerry Van Baren Read applicable doc/*.README; 6259c609719bSwdenk Read the source, Luke; 62606c3fef28SJerry Van Baren /* find . -name "*.[chS]" | xargs grep -i <keyword> */ 6261c609719bSwdenk } 6262c609719bSwdenk 62636c3fef28SJerry Van Baren if (available_money > toLocalCurrency ($2500)) 62646c3fef28SJerry Van Baren Buy a BDI3000; 62656c3fef28SJerry Van Baren else 6266c609719bSwdenk Add a lot of aggravation and time; 6267c609719bSwdenk 62686c3fef28SJerry Van Baren if (a similar board exists) { /* hopefully... */ 62696c3fef28SJerry Van Baren cp -a board/<similar> board/<myboard> 62706c3fef28SJerry Van Baren cp include/configs/<similar>.h include/configs/<myboard>.h 62716c3fef28SJerry Van Baren } else { 6272c609719bSwdenk Create your own board support subdirectory; 62736c3fef28SJerry Van Baren Create your own board include/configs/<myboard>.h file; 62746c3fef28SJerry Van Baren } 62756c3fef28SJerry Van Baren Edit new board/<myboard> files 62766c3fef28SJerry Van Baren Edit new include/configs/<myboard>.h 6277c609719bSwdenk 62786c3fef28SJerry Van Baren while (!accepted) { 6279c609719bSwdenk while (!running) { 6280c609719bSwdenk do { 6281c609719bSwdenk Add / modify source code; 6282c609719bSwdenk } until (compiles); 6283c609719bSwdenk Debug; 6284c609719bSwdenk if (clueless) 6285c609719bSwdenk email("Hi, I am having problems..."); 6286c609719bSwdenk } 62876c3fef28SJerry Van Baren Send patch file to the U-Boot email list; 62886c3fef28SJerry Van Baren if (reasonable critiques) 62896c3fef28SJerry Van Baren Incorporate improvements from email list code review; 62906c3fef28SJerry Van Baren else 62916c3fef28SJerry Van Baren Defend code as written; 62926c3fef28SJerry Van Baren } 6293c609719bSwdenk 6294c609719bSwdenk return 0; 6295c609719bSwdenk} 6296c609719bSwdenk 6297c609719bSwdenkvoid no_more_time (int sig) 6298c609719bSwdenk{ 6299c609719bSwdenk hire_a_guru(); 6300c609719bSwdenk} 6301c609719bSwdenk 6302c609719bSwdenk 6303c609719bSwdenkCoding Standards: 6304c609719bSwdenk----------------- 6305c609719bSwdenk 6306c609719bSwdenkAll contributions to U-Boot should conform to the Linux kernel 63072c051651SDetlev Zundelcoding style; see the file "Documentation/CodingStyle" and the script 63087ca9296eSWolfgang Denk"scripts/Lindent" in your Linux kernel source directory. 6309c609719bSwdenk 63102c051651SDetlev ZundelSource files originating from a different project (for example the 63112c051651SDetlev ZundelMTD subsystem) are generally exempt from these guidelines and are not 63122c051651SDetlev Zundelreformated to ease subsequent migration to newer versions of those 63132c051651SDetlev Zundelsources. 63142c051651SDetlev Zundel 63152c051651SDetlev ZundelPlease note that U-Boot is implemented in C (and to some small parts in 63162c051651SDetlev ZundelAssembler); no C++ is used, so please do not use C++ style comments (//) 63172c051651SDetlev Zundelin your code. 6318c609719bSwdenk 6319c178d3daSwdenkPlease also stick to the following formatting rules: 6320180d3f74Swdenk- remove any trailing white space 63217ca9296eSWolfgang Denk- use TAB characters for indentation and vertical alignment, not spaces 6322180d3f74Swdenk- make sure NOT to use DOS '\r\n' line feeds 63237ca9296eSWolfgang Denk- do not add more than 2 consecutive empty lines to source files 6324180d3f74Swdenk- do not add trailing empty lines to source files 6325180d3f74Swdenk 6326c609719bSwdenkSubmissions which do not conform to the standards may be returned 6327c609719bSwdenkwith a request to reformat the changes. 6328c609719bSwdenk 6329c609719bSwdenk 6330c609719bSwdenkSubmitting Patches: 6331c609719bSwdenk------------------- 6332c609719bSwdenk 6333c609719bSwdenkSince the number of patches for U-Boot is growing, we need to 6334c609719bSwdenkestablish some rules. Submissions which do not conform to these rules 6335c609719bSwdenkmay be rejected, even when they contain important and valuable stuff. 6336c609719bSwdenk 63370d28f34bSMagnus LiljaPlease see http://www.denx.de/wiki/U-Boot/Patches for details. 6338218ca724SWolfgang Denk 63390668236bSWolfgang DenkPatches shall be sent to the u-boot mailing list <u-boot@lists.denx.de>; 63400668236bSWolfgang Denksee http://lists.denx.de/mailman/listinfo/u-boot 63410668236bSWolfgang Denk 6342c609719bSwdenkWhen you send a patch, please include the following information with 6343c609719bSwdenkit: 6344c609719bSwdenk 6345c609719bSwdenk* For bug fixes: a description of the bug and how your patch fixes 6346c609719bSwdenk this bug. Please try to include a way of demonstrating that the 6347c609719bSwdenk patch actually fixes something. 6348c609719bSwdenk 6349c609719bSwdenk* For new features: a description of the feature and your 6350c609719bSwdenk implementation. 6351c609719bSwdenk 6352c609719bSwdenk* A CHANGELOG entry as plaintext (separate from the patch) 6353c609719bSwdenk 6354c609719bSwdenk* For major contributions, your entry to the CREDITS file 6355c609719bSwdenk 635627af930eSAlbert ARIBAUD* When you add support for a new board, don't forget to add a 635727af930eSAlbert ARIBAUD maintainer e-mail address to the boards.cfg file, too. 6358c609719bSwdenk 6359c609719bSwdenk* If your patch adds new configuration options, don't forget to 6360c609719bSwdenk document these in the README file. 6361c609719bSwdenk 6362218ca724SWolfgang Denk* The patch itself. If you are using git (which is *strongly* 6363218ca724SWolfgang Denk recommended) you can easily generate the patch using the 63647ca9296eSWolfgang Denk "git format-patch". If you then use "git send-email" to send it to 6365218ca724SWolfgang Denk the U-Boot mailing list, you will avoid most of the common problems 6366218ca724SWolfgang Denk with some other mail clients. 6367c609719bSwdenk 6368218ca724SWolfgang Denk If you cannot use git, use "diff -purN OLD NEW". If your version of 6369218ca724SWolfgang Denk diff does not support these options, then get the latest version of 6370218ca724SWolfgang Denk GNU diff. 63716dff5529Swdenk 6372218ca724SWolfgang Denk The current directory when running this command shall be the parent 6373218ca724SWolfgang Denk directory of the U-Boot source tree (i. e. please make sure that 6374218ca724SWolfgang Denk your patch includes sufficient directory information for the 6375218ca724SWolfgang Denk affected files). 6376218ca724SWolfgang Denk 6377218ca724SWolfgang Denk We prefer patches as plain text. MIME attachments are discouraged, 6378218ca724SWolfgang Denk and compressed attachments must not be used. 6379c609719bSwdenk 638052f52c14Swdenk* If one logical set of modifications affects or creates several 638152f52c14Swdenk files, all these changes shall be submitted in a SINGLE patch file. 638252f52c14Swdenk 638352f52c14Swdenk* Changesets that contain different, unrelated modifications shall be 638452f52c14Swdenk submitted as SEPARATE patches, one patch per changeset. 638552f52c14Swdenk 638652f52c14Swdenk 6387c609719bSwdenkNotes: 6388c609719bSwdenk 6389c609719bSwdenk* Before sending the patch, run the MAKEALL script on your patched 6390c609719bSwdenk source tree and make sure that no errors or warnings are reported 6391c609719bSwdenk for any of the boards. 6392c609719bSwdenk 6393c609719bSwdenk* Keep your modifications to the necessary minimum: A patch 6394c609719bSwdenk containing several unrelated changes or arbitrary reformats will be 6395c609719bSwdenk returned with a request to re-formatting / split it. 6396c609719bSwdenk 6397c609719bSwdenk* If you modify existing code, make sure that your new code does not 6398c609719bSwdenk add to the memory footprint of the code ;-) Small is beautiful! 6399c609719bSwdenk When adding new features, these should compile conditionally only 6400c609719bSwdenk (using #ifdef), and the resulting code with the new feature 6401c609719bSwdenk disabled must not need more memory than the old code without your 6402c609719bSwdenk modification. 640390dc6704Swdenk 64040668236bSWolfgang Denk* Remember that there is a size limit of 100 kB per message on the 64050668236bSWolfgang Denk u-boot mailing list. Bigger patches will be moderated. If they are 64060668236bSWolfgang Denk reasonable and not too big, they will be acknowledged. But patches 64070668236bSWolfgang Denk bigger than the size limit should be avoided. 6408