1c609719bSwdenk# 2b75190deSWolfgang Denk# (C) Copyright 2000 - 2012 3c609719bSwdenk# Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4c609719bSwdenk# 5c609719bSwdenk# See file CREDITS for list of people who contributed to this 6c609719bSwdenk# project. 7c609719bSwdenk# 8c609719bSwdenk# This program is free software; you can redistribute it and/or 9c609719bSwdenk# modify it under the terms of the GNU General Public License as 10c609719bSwdenk# published by the Free Software Foundation; either version 2 of 11c609719bSwdenk# the License, or (at your option) any later version. 12c609719bSwdenk# 13c609719bSwdenk# This program is distributed in the hope that it will be useful, 14c609719bSwdenk# but WITHOUT ANY WARRANTY; without even the implied warranty of 15c609719bSwdenk# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16c609719bSwdenk# GNU General Public License for more details. 17c609719bSwdenk# 18c609719bSwdenk# You should have received a copy of the GNU General Public License 19c609719bSwdenk# along with this program; if not, write to the Free Software 20c609719bSwdenk# Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21c609719bSwdenk# MA 02111-1307 USA 22c609719bSwdenk# 23c609719bSwdenk 24c609719bSwdenkSummary: 25c609719bSwdenk======== 26c609719bSwdenk 2724ee89b9SwdenkThis directory contains the source code for U-Boot, a boot loader for 28e86e5a07SwdenkEmbedded boards based on PowerPC, ARM, MIPS and several other 29e86e5a07Swdenkprocessors, which can be installed in a boot ROM and used to 30e86e5a07Swdenkinitialize and test the hardware or to download and run application 31e86e5a07Swdenkcode. 32c609719bSwdenk 33c609719bSwdenkThe development of U-Boot is closely related to Linux: some parts of 3424ee89b9Swdenkthe source code originate in the Linux source tree, we have some 3524ee89b9Swdenkheader files in common, and special provision has been made to 36c609719bSwdenksupport booting of Linux images. 37c609719bSwdenk 38c609719bSwdenkSome attention has been paid to make this software easily 39c609719bSwdenkconfigurable and extendable. For instance, all monitor commands are 40c609719bSwdenkimplemented with the same call interface, so that it's very easy to 41c609719bSwdenkadd new commands. Also, instead of permanently adding rarely used 42c609719bSwdenkcode (for instance hardware test utilities) to the monitor, you can 43c609719bSwdenkload and run it dynamically. 44c609719bSwdenk 45c609719bSwdenk 46c609719bSwdenkStatus: 47c609719bSwdenk======= 48c609719bSwdenk 49c609719bSwdenkIn general, all boards for which a configuration option exists in the 50c609719bSwdenkMakefile have been tested to some extent and can be considered 51c609719bSwdenk"working". In fact, many of them are used in production systems. 52c609719bSwdenk 53c609719bSwdenkIn case of problems see the CHANGELOG and CREDITS files to find out 54218ca724SWolfgang Denkwho contributed the specific port. The MAINTAINERS file lists board 55218ca724SWolfgang Denkmaintainers. 56c609719bSwdenk 57adb9d851SRobert P. J. DayNote: There is no CHANGELOG file in the actual U-Boot source tree; 58adb9d851SRobert P. J. Dayit can be created dynamically from the Git log using: 59adb9d851SRobert P. J. Day 60adb9d851SRobert P. J. Day make CHANGELOG 61adb9d851SRobert P. J. Day 62c609719bSwdenk 63c609719bSwdenkWhere to get help: 64c609719bSwdenk================== 65c609719bSwdenk 66c609719bSwdenkIn case you have questions about, problems with or contributions for 67c609719bSwdenkU-Boot you should send a message to the U-Boot mailing list at 680c32565fSPeter Tyser<u-boot@lists.denx.de>. There is also an archive of previous traffic 690c32565fSPeter Tyseron the mailing list - please search the archive before asking FAQ's. 700c32565fSPeter TyserPlease see http://lists.denx.de/pipermail/u-boot and 710c32565fSPeter Tyserhttp://dir.gmane.org/gmane.comp.boot-loaders.u-boot 72c609719bSwdenk 73c609719bSwdenk 74218ca724SWolfgang DenkWhere to get source code: 75218ca724SWolfgang Denk========================= 76218ca724SWolfgang Denk 77218ca724SWolfgang DenkThe U-Boot source code is maintained in the git repository at 78218ca724SWolfgang Denkgit://www.denx.de/git/u-boot.git ; you can browse it online at 79218ca724SWolfgang Denkhttp://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=summary 80218ca724SWolfgang Denk 81218ca724SWolfgang DenkThe "snapshot" links on this page allow you to download tarballs of 8211ccc33fSMarcel Ziswilerany version you might be interested in. Official releases are also 83218ca724SWolfgang Denkavailable for FTP download from the ftp://ftp.denx.de/pub/u-boot/ 84218ca724SWolfgang Denkdirectory. 85218ca724SWolfgang Denk 86d4ee711dSAnatolij GustschinPre-built (and tested) images are available from 87218ca724SWolfgang Denkftp://ftp.denx.de/pub/u-boot/images/ 88218ca724SWolfgang Denk 89218ca724SWolfgang Denk 90c609719bSwdenkWhere we come from: 91c609719bSwdenk=================== 92c609719bSwdenk 93c609719bSwdenk- start from 8xxrom sources 9424ee89b9Swdenk- create PPCBoot project (http://sourceforge.net/projects/ppcboot) 95c609719bSwdenk- clean up code 96c609719bSwdenk- make it easier to add custom boards 97c609719bSwdenk- make it possible to add other [PowerPC] CPUs 98c609719bSwdenk- extend functions, especially: 99c609719bSwdenk * Provide extended interface to Linux boot loader 100c609719bSwdenk * S-Record download 101c609719bSwdenk * network boot 10211ccc33fSMarcel Ziswiler * PCMCIA / CompactFlash / ATA disk / SCSI ... boot 10324ee89b9Swdenk- create ARMBoot project (http://sourceforge.net/projects/armboot) 104c609719bSwdenk- add other CPU families (starting with ARM) 10524ee89b9Swdenk- create U-Boot project (http://sourceforge.net/projects/u-boot) 1060d28f34bSMagnus Lilja- current project page: see http://www.denx.de/wiki/U-Boot 10724ee89b9Swdenk 10824ee89b9Swdenk 10924ee89b9SwdenkNames and Spelling: 11024ee89b9Swdenk=================== 11124ee89b9Swdenk 11224ee89b9SwdenkThe "official" name of this project is "Das U-Boot". The spelling 11324ee89b9Swdenk"U-Boot" shall be used in all written text (documentation, comments 11424ee89b9Swdenkin source files etc.). Example: 11524ee89b9Swdenk 11624ee89b9Swdenk This is the README file for the U-Boot project. 11724ee89b9Swdenk 11824ee89b9SwdenkFile names etc. shall be based on the string "u-boot". Examples: 11924ee89b9Swdenk 12024ee89b9Swdenk include/asm-ppc/u-boot.h 12124ee89b9Swdenk 12224ee89b9Swdenk #include <asm/u-boot.h> 12324ee89b9Swdenk 12424ee89b9SwdenkVariable names, preprocessor constants etc. shall be either based on 12524ee89b9Swdenkthe string "u_boot" or on "U_BOOT". Example: 12624ee89b9Swdenk 12724ee89b9Swdenk U_BOOT_VERSION u_boot_logo 12824ee89b9Swdenk IH_OS_U_BOOT u_boot_hush_start 129c609719bSwdenk 130c609719bSwdenk 13193f19cc0SwdenkVersioning: 13293f19cc0Swdenk=========== 13393f19cc0Swdenk 134360d883aSThomas WeberStarting with the release in October 2008, the names of the releases 135360d883aSThomas Weberwere changed from numerical release numbers without deeper meaning 136360d883aSThomas Weberinto a time stamp based numbering. Regular releases are identified by 137360d883aSThomas Webernames consisting of the calendar year and month of the release date. 138360d883aSThomas WeberAdditional fields (if present) indicate release candidates or bug fix 139360d883aSThomas Weberreleases in "stable" maintenance trees. 14093f19cc0Swdenk 141360d883aSThomas WeberExamples: 142360d883aSThomas Weber U-Boot v2009.11 - Release November 2009 143360d883aSThomas Weber U-Boot v2009.11.1 - Release 1 in version November 2009 stable tree 144360d883aSThomas Weber U-Boot v2010.09-rc1 - Release candiate 1 for September 2010 release 14593f19cc0Swdenk 14693f19cc0Swdenk 147c609719bSwdenkDirectory Hierarchy: 148c609719bSwdenk==================== 149c609719bSwdenk 1508d321b81SPeter Tyser/arch Architecture specific files 1518d321b81SPeter Tyser /arm Files generic to ARM architecture 1528d321b81SPeter Tyser /cpu CPU specific files 1538d321b81SPeter Tyser /arm720t Files specific to ARM 720 CPUs 1548d321b81SPeter Tyser /arm920t Files specific to ARM 920 CPUs 1556eb0921aSAndreas Bießmann /at91 Files specific to Atmel AT91RM9200 CPU 1568d321b81SPeter Tyser /imx Files specific to Freescale MC9328 i.MX CPUs 1578d321b81SPeter Tyser /s3c24x0 Files specific to Samsung S3C24X0 CPUs 1588d321b81SPeter Tyser /arm925t Files specific to ARM 925 CPUs 1598d321b81SPeter Tyser /arm926ejs Files specific to ARM 926 CPUs 1608d321b81SPeter Tyser /arm1136 Files specific to ARM 1136 CPUs 1618d321b81SPeter Tyser /ixp Files specific to Intel XScale IXP CPUs 1628d321b81SPeter Tyser /pxa Files specific to Intel XScale PXA CPUs 1638d321b81SPeter Tyser /s3c44b0 Files specific to Samsung S3C44B0 CPUs 1648d321b81SPeter Tyser /sa1100 Files specific to Intel StrongARM SA1100 CPUs 1658d321b81SPeter Tyser /lib Architecture specific library files 1668d321b81SPeter Tyser /avr32 Files generic to AVR32 architecture 1678d321b81SPeter Tyser /cpu CPU specific files 1688d321b81SPeter Tyser /lib Architecture specific library files 1698d321b81SPeter Tyser /blackfin Files generic to Analog Devices Blackfin architecture 1708d321b81SPeter Tyser /cpu CPU specific files 1718d321b81SPeter Tyser /lib Architecture specific library files 172fea25720SGraeme Russ /x86 Files generic to x86 architecture 1738d321b81SPeter Tyser /cpu CPU specific files 1748d321b81SPeter Tyser /lib Architecture specific library files 1758d321b81SPeter Tyser /m68k Files generic to m68k architecture 1768d321b81SPeter Tyser /cpu CPU specific files 1778d321b81SPeter Tyser /mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs 1788d321b81SPeter Tyser /mcf5227x Files specific to Freescale ColdFire MCF5227x CPUs 1798d321b81SPeter Tyser /mcf532x Files specific to Freescale ColdFire MCF5329 CPUs 1808d321b81SPeter Tyser /mcf5445x Files specific to Freescale ColdFire MCF5445x CPUs 1818d321b81SPeter Tyser /mcf547x_8x Files specific to Freescale ColdFire MCF547x_8x CPUs 1828d321b81SPeter Tyser /lib Architecture specific library files 1838d321b81SPeter Tyser /microblaze Files generic to microblaze architecture 1848d321b81SPeter Tyser /cpu CPU specific files 1858d321b81SPeter Tyser /lib Architecture specific library files 1868d321b81SPeter Tyser /mips Files generic to MIPS architecture 1878d321b81SPeter Tyser /cpu CPU specific files 18892bbd64eSDaniel Schwierzeck /mips32 Files specific to MIPS32 CPUs 18980421fccSXiangfu Liu /xburst Files specific to Ingenic XBurst CPUs 1908d321b81SPeter Tyser /lib Architecture specific library files 191afc1ce82SMacpaul Lin /nds32 Files generic to NDS32 architecture 192afc1ce82SMacpaul Lin /cpu CPU specific files 193afc1ce82SMacpaul Lin /n1213 Files specific to Andes Technology N1213 CPUs 194afc1ce82SMacpaul Lin /lib Architecture specific library files 1958d321b81SPeter Tyser /nios2 Files generic to Altera NIOS2 architecture 1968d321b81SPeter Tyser /cpu CPU specific files 1978d321b81SPeter Tyser /lib Architecture specific library files 198a47a12beSStefan Roese /powerpc Files generic to PowerPC architecture 1998d321b81SPeter Tyser /cpu CPU specific files 2008d321b81SPeter Tyser /74xx_7xx Files specific to Freescale MPC74xx and 7xx CPUs 2018d321b81SPeter Tyser /mpc5xx Files specific to Freescale MPC5xx CPUs 2028d321b81SPeter Tyser /mpc5xxx Files specific to Freescale MPC5xxx CPUs 2038d321b81SPeter Tyser /mpc8xx Files specific to Freescale MPC8xx CPUs 2048d321b81SPeter Tyser /mpc8220 Files specific to Freescale MPC8220 CPUs 2058d321b81SPeter Tyser /mpc824x Files specific to Freescale MPC824x CPUs 2068d321b81SPeter Tyser /mpc8260 Files specific to Freescale MPC8260 CPUs 2078d321b81SPeter Tyser /mpc85xx Files specific to Freescale MPC85xx CPUs 2088d321b81SPeter Tyser /ppc4xx Files specific to AMCC PowerPC 4xx CPUs 2098d321b81SPeter Tyser /lib Architecture specific library files 2108d321b81SPeter Tyser /sh Files generic to SH architecture 2118d321b81SPeter Tyser /cpu CPU specific files 2128d321b81SPeter Tyser /sh2 Files specific to sh2 CPUs 2138d321b81SPeter Tyser /sh3 Files specific to sh3 CPUs 2148d321b81SPeter Tyser /sh4 Files specific to sh4 CPUs 2158d321b81SPeter Tyser /lib Architecture specific library files 2168d321b81SPeter Tyser /sparc Files generic to SPARC architecture 2178d321b81SPeter Tyser /cpu CPU specific files 2188d321b81SPeter Tyser /leon2 Files specific to Gaisler LEON2 SPARC CPU 2198d321b81SPeter Tyser /leon3 Files specific to Gaisler LEON3 SPARC CPU 2208d321b81SPeter Tyser /lib Architecture specific library files 2218d321b81SPeter Tyser/api Machine/arch independent API for external apps 2228d321b81SPeter Tyser/board Board dependent files 2238d321b81SPeter Tyser/common Misc architecture independent functions 2248d321b81SPeter Tyser/disk Code for disk drive partition handling 2258d321b81SPeter Tyser/doc Documentation (don't expect too much) 2268d321b81SPeter Tyser/drivers Commonly used device drivers 2278d321b81SPeter Tyser/examples Example code for standalone applications, etc. 2288d321b81SPeter Tyser/fs Filesystem code (cramfs, ext2, jffs2, etc.) 2298d321b81SPeter Tyser/include Header Files 2308d321b81SPeter Tyser/lib Files generic to all architectures 2318d321b81SPeter Tyser /libfdt Library files to support flattened device trees 2328d321b81SPeter Tyser /lzma Library files to support LZMA decompression 2338d321b81SPeter Tyser /lzo Library files to support LZO decompression 2348d321b81SPeter Tyser/net Networking code 2358d321b81SPeter Tyser/post Power On Self Test 2368d321b81SPeter Tyser/rtc Real Time Clock drivers 2378d321b81SPeter Tyser/tools Tools to build S-Record or U-Boot images, etc. 238c609719bSwdenk 239c609719bSwdenkSoftware Configuration: 240c609719bSwdenk======================= 241c609719bSwdenk 242c609719bSwdenkConfiguration is usually done using C preprocessor defines; the 243c609719bSwdenkrationale behind that is to avoid dead code whenever possible. 244c609719bSwdenk 245c609719bSwdenkThere are two classes of configuration variables: 246c609719bSwdenk 247c609719bSwdenk* Configuration _OPTIONS_: 248c609719bSwdenk These are selectable by the user and have names beginning with 249c609719bSwdenk "CONFIG_". 250c609719bSwdenk 251c609719bSwdenk* Configuration _SETTINGS_: 252c609719bSwdenk These depend on the hardware etc. and should not be meddled with if 253c609719bSwdenk you don't know what you're doing; they have names beginning with 2546d0f6bcfSJean-Christophe PLAGNIOL-VILLARD "CONFIG_SYS_". 255c609719bSwdenk 256c609719bSwdenkLater we will add a configuration tool - probably similar to or even 257c609719bSwdenkidentical to what's used for the Linux kernel. Right now, we have to 258c609719bSwdenkdo the configuration by hand, which means creating some symbolic 259c609719bSwdenklinks and editing some configuration files. We use the TQM8xxL boards 260c609719bSwdenkas an example here. 261c609719bSwdenk 262c609719bSwdenk 263c609719bSwdenkSelection of Processor Architecture and Board Type: 264c609719bSwdenk--------------------------------------------------- 265c609719bSwdenk 266c609719bSwdenkFor all supported boards there are ready-to-use default 267c609719bSwdenkconfigurations available; just type "make <board_name>_config". 268c609719bSwdenk 269c609719bSwdenkExample: For a TQM823L module type: 270c609719bSwdenk 271c609719bSwdenk cd u-boot 272c609719bSwdenk make TQM823L_config 273c609719bSwdenk 27411ccc33fSMarcel ZiswilerFor the Cogent platform, you need to specify the CPU type as well; 275c609719bSwdenke.g. "make cogent_mpc8xx_config". And also configure the cogent 276c609719bSwdenkdirectory according to the instructions in cogent/README. 277c609719bSwdenk 278c609719bSwdenk 279c609719bSwdenkConfiguration Options: 280c609719bSwdenk---------------------- 281c609719bSwdenk 282c609719bSwdenkConfiguration depends on the combination of board and CPU type; all 283c609719bSwdenksuch information is kept in a configuration file 284c609719bSwdenk"include/configs/<board_name>.h". 285c609719bSwdenk 286c609719bSwdenkExample: For a TQM823L module, all configuration settings are in 287c609719bSwdenk"include/configs/TQM823L.h". 288c609719bSwdenk 289c609719bSwdenk 2907f6c2cbcSwdenkMany of the options are named exactly as the corresponding Linux 2917f6c2cbcSwdenkkernel configuration options. The intention is to make it easier to 2927f6c2cbcSwdenkbuild a config tool - later. 2937f6c2cbcSwdenk 2947f6c2cbcSwdenk 295c609719bSwdenkThe following options need to be configured: 296c609719bSwdenk 2972628114eSKim Phillips- CPU Type: Define exactly one, e.g. CONFIG_MPC85XX. 298c609719bSwdenk 2992628114eSKim Phillips- Board Type: Define exactly one, e.g. CONFIG_MPC8540ADS. 3006ccec449SWolfgang Denk 3016ccec449SWolfgang Denk- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined) 30209ea0de0SHaavard Skinnemoen Define exactly one, e.g. CONFIG_ATSTK1002 303c609719bSwdenk 304c609719bSwdenk- CPU Module Type: (if CONFIG_COGENT is defined) 305c609719bSwdenk Define exactly one of 306c609719bSwdenk CONFIG_CMA286_60_OLD 307c609719bSwdenk--- FIXME --- not tested yet: 308c609719bSwdenk CONFIG_CMA286_60, CONFIG_CMA286_21, CONFIG_CMA286_60P, 309c609719bSwdenk CONFIG_CMA287_23, CONFIG_CMA287_50 310c609719bSwdenk 311c609719bSwdenk- Motherboard Type: (if CONFIG_COGENT is defined) 312c609719bSwdenk Define exactly one of 313c609719bSwdenk CONFIG_CMA101, CONFIG_CMA102 314c609719bSwdenk 315c609719bSwdenk- Motherboard I/O Modules: (if CONFIG_COGENT is defined) 316c609719bSwdenk Define one or more of 317c609719bSwdenk CONFIG_CMA302 318c609719bSwdenk 319c609719bSwdenk- Motherboard Options: (if CONFIG_CMA101 or CONFIG_CMA102 are defined) 320c609719bSwdenk Define one or more of 321c609719bSwdenk CONFIG_LCD_HEARTBEAT - update a character position on 32211ccc33fSMarcel Ziswiler the LCD display every second with 323c609719bSwdenk a "rotator" |\-/|\-/ 324c609719bSwdenk 3252535d602Swdenk- Board flavour: (if CONFIG_MPC8260ADS is defined) 3262535d602Swdenk CONFIG_ADSTYPE 3272535d602Swdenk Possible values are: 3286d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_8260ADS - original MPC8260ADS 3296d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_8266ADS - MPC8266ADS 3306d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PQ2FADS - PQ2FADS-ZU or PQ2FADS-VR 3316d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_8272ADS - MPC8272ADS 3322535d602Swdenk 333cf946c6dSLei Wen- Marvell Family Member 334cf946c6dSLei Wen CONFIG_SYS_MVFS - define it if you want to enable 335cf946c6dSLei Wen multiple fs option at one time 336cf946c6dSLei Wen for marvell soc family 337cf946c6dSLei Wen 338c609719bSwdenk- MPC824X Family Member (if CONFIG_MPC824X is defined) 339c609719bSwdenk Define exactly one of 340c609719bSwdenk CONFIG_MPC8240, CONFIG_MPC8245 341c609719bSwdenk 34211ccc33fSMarcel Ziswiler- 8xx CPU Options: (if using an MPC8xx CPU) 34366ca92a5Swdenk CONFIG_8xx_GCLK_FREQ - deprecated: CPU clock if 34466ca92a5Swdenk get_gclk_freq() cannot work 3455da627a4Swdenk e.g. if there is no 32KHz 3465da627a4Swdenk reference PIT/RTC clock 34766ca92a5Swdenk CONFIG_8xx_OSCLK - PLL input clock (either EXTCLK 34866ca92a5Swdenk or XTAL/EXTAL) 349c609719bSwdenk 35066ca92a5Swdenk- 859/866/885 CPU options: (if using a MPC859 or MPC866 or MPC885 CPU): 3516d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_8xx_CPUCLK_MIN 3526d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_8xx_CPUCLK_MAX 35366ca92a5Swdenk CONFIG_8xx_CPUCLK_DEFAULT 35475d1ea7fSwdenk See doc/README.MPC866 35575d1ea7fSwdenk 3566d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_MEASURE_CPUCLK 35775d1ea7fSwdenk 35875d1ea7fSwdenk Define this to measure the actual CPU clock instead 35975d1ea7fSwdenk of relying on the correctness of the configured 36075d1ea7fSwdenk values. Mostly useful for board bringup to make sure 36175d1ea7fSwdenk the PLL is locked at the intended frequency. Note 36275d1ea7fSwdenk that this requires a (stable) reference clock (32 kHz 3636d0f6bcfSJean-Christophe PLAGNIOL-VILLARD RTC clock or CONFIG_SYS_8XX_XIN) 36475d1ea7fSwdenk 365506f3918SHeiko Schocher CONFIG_SYS_DELAYED_ICACHE 366506f3918SHeiko Schocher 367506f3918SHeiko Schocher Define this option if you want to enable the 368506f3918SHeiko Schocher ICache only when Code runs from RAM. 369506f3918SHeiko Schocher 37066412c63SKumar Gala- 85xx CPU Options: 371ffd06e02SYork Sun CONFIG_SYS_PPC64 372ffd06e02SYork Sun 373ffd06e02SYork Sun Specifies that the core is a 64-bit PowerPC implementation (implements 374ffd06e02SYork Sun the "64" category of the Power ISA). This is necessary for ePAPR 375ffd06e02SYork Sun compliance, among other possible reasons. 376ffd06e02SYork Sun 37766412c63SKumar Gala CONFIG_SYS_FSL_TBCLK_DIV 37866412c63SKumar Gala 37966412c63SKumar Gala Defines the core time base clock divider ratio compared to the 38066412c63SKumar Gala system clock. On most PQ3 devices this is 8, on newer QorIQ 38166412c63SKumar Gala devices it can be 16 or 32. The ratio varies from SoC to Soc. 38266412c63SKumar Gala 3838f29084aSKumar Gala CONFIG_SYS_FSL_PCIE_COMPAT 3848f29084aSKumar Gala 3858f29084aSKumar Gala Defines the string to utilize when trying to match PCIe device 3868f29084aSKumar Gala tree nodes for the given platform. 3878f29084aSKumar Gala 388afa6b551SPrabhakar Kushwaha CONFIG_SYS_PPC_E500_DEBUG_TLB 389afa6b551SPrabhakar Kushwaha 390afa6b551SPrabhakar Kushwaha Enables a temporary TLB entry to be used during boot to work 391afa6b551SPrabhakar Kushwaha around limitations in e500v1 and e500v2 external debugger 392afa6b551SPrabhakar Kushwaha support. This reduces the portions of the boot code where 393afa6b551SPrabhakar Kushwaha breakpoints and single stepping do not work. The value of this 394afa6b551SPrabhakar Kushwaha symbol should be set to the TLB1 entry to be used for this 395afa6b551SPrabhakar Kushwaha purpose. 396afa6b551SPrabhakar Kushwaha 39733eee330SScott Wood CONFIG_SYS_FSL_ERRATUM_A004510 39833eee330SScott Wood 39933eee330SScott Wood Enables a workaround for erratum A004510. If set, 40033eee330SScott Wood then CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV and 40133eee330SScott Wood CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY must be set. 40233eee330SScott Wood 40333eee330SScott Wood CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 40433eee330SScott Wood CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 (optional) 40533eee330SScott Wood 40633eee330SScott Wood Defines one or two SoC revisions (low 8 bits of SVR) 40733eee330SScott Wood for which the A004510 workaround should be applied. 40833eee330SScott Wood 40933eee330SScott Wood The rest of SVR is either not relevant to the decision 41033eee330SScott Wood of whether the erratum is present (e.g. p2040 versus 41133eee330SScott Wood p2041) or is implied by the build target, which controls 41233eee330SScott Wood whether CONFIG_SYS_FSL_ERRATUM_A004510 is set. 41333eee330SScott Wood 41433eee330SScott Wood See Freescale App Note 4493 for more information about 41533eee330SScott Wood this erratum. 41633eee330SScott Wood 41733eee330SScott Wood CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 41833eee330SScott Wood 41933eee330SScott Wood This is the value to write into CCSR offset 0x18600 42033eee330SScott Wood according to the A004510 workaround. 42133eee330SScott Wood 4226cb461b4SDaniel Schwierzeck- Generic CPU options: 4236cb461b4SDaniel Schwierzeck CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN 4246cb461b4SDaniel Schwierzeck 4256cb461b4SDaniel Schwierzeck Defines the endianess of the CPU. Implementation of those 4266cb461b4SDaniel Schwierzeck values is arch specific. 4276cb461b4SDaniel Schwierzeck 4280b953ffcSMarkus Klotzbuecher- Intel Monahans options: 4296d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO 4300b953ffcSMarkus Klotzbuecher 4310b953ffcSMarkus Klotzbuecher Defines the Monahans run mode to oscillator 4320b953ffcSMarkus Klotzbuecher ratio. Valid values are 8, 16, 24, 31. The core 4330b953ffcSMarkus Klotzbuecher frequency is this value multiplied by 13 MHz. 4340b953ffcSMarkus Klotzbuecher 4356d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO 4360b953ffcSMarkus Klotzbuecher 4370b953ffcSMarkus Klotzbuecher Defines the Monahans turbo mode to oscillator 4380b953ffcSMarkus Klotzbuecher ratio. Valid values are 1 (default if undefined) and 4390b953ffcSMarkus Klotzbuecher 2. The core frequency as calculated above is multiplied 4400b953ffcSMarkus Klotzbuecher by this value. 4410b953ffcSMarkus Klotzbuecher 44292bbd64eSDaniel Schwierzeck- MIPS CPU options: 44392bbd64eSDaniel Schwierzeck CONFIG_SYS_INIT_SP_OFFSET 44492bbd64eSDaniel Schwierzeck 44592bbd64eSDaniel Schwierzeck Offset relative to CONFIG_SYS_SDRAM_BASE for initial stack 44692bbd64eSDaniel Schwierzeck pointer. This is needed for the temporary stack before 44792bbd64eSDaniel Schwierzeck relocation. 44892bbd64eSDaniel Schwierzeck 44992bbd64eSDaniel Schwierzeck CONFIG_SYS_MIPS_CACHE_MODE 45092bbd64eSDaniel Schwierzeck 45192bbd64eSDaniel Schwierzeck Cache operation mode for the MIPS CPU. 45292bbd64eSDaniel Schwierzeck See also arch/mips/include/asm/mipsregs.h. 45392bbd64eSDaniel Schwierzeck Possible values are: 45492bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_NO_WA 45592bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_WA 45692bbd64eSDaniel Schwierzeck CONF_CM_UNCACHED 45792bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_NONCOHERENT 45892bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_CE 45992bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_COW 46092bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_CUW 46192bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_ACCELERATED 46292bbd64eSDaniel Schwierzeck 46392bbd64eSDaniel Schwierzeck CONFIG_SYS_XWAY_EBU_BOOTCFG 46492bbd64eSDaniel Schwierzeck 46592bbd64eSDaniel Schwierzeck Special option for Lantiq XWAY SoCs for booting from NOR flash. 46692bbd64eSDaniel Schwierzeck See also arch/mips/cpu/mips32/start.S. 46792bbd64eSDaniel Schwierzeck 46892bbd64eSDaniel Schwierzeck CONFIG_XWAY_SWAP_BYTES 46992bbd64eSDaniel Schwierzeck 47092bbd64eSDaniel Schwierzeck Enable compilation of tools/xway-swap-bytes needed for Lantiq 47192bbd64eSDaniel Schwierzeck XWAY SoCs for booting from NOR flash. The U-Boot image needs to 47292bbd64eSDaniel Schwierzeck be swapped if a flash programmer is used. 47392bbd64eSDaniel Schwierzeck 474b67d8816SChristian Riesch- ARM options: 475b67d8816SChristian Riesch CONFIG_SYS_EXCEPTION_VECTORS_HIGH 476b67d8816SChristian Riesch 477b67d8816SChristian Riesch Select high exception vectors of the ARM core, e.g., do not 478b67d8816SChristian Riesch clear the V bit of the c1 register of CP15. 479b67d8816SChristian Riesch 4805356f545SAneesh V CONFIG_SYS_THUMB_BUILD 4815356f545SAneesh V 4825356f545SAneesh V Use this flag to build U-Boot using the Thumb instruction 4835356f545SAneesh V set for ARM architectures. Thumb instruction set provides 4845356f545SAneesh V better code density. For ARM architectures that support 4855356f545SAneesh V Thumb2 this flag will result in Thumb2 code generated by 4865356f545SAneesh V GCC. 4875356f545SAneesh V 4885da627a4Swdenk- Linux Kernel Interface: 489c609719bSwdenk CONFIG_CLOCKS_IN_MHZ 490c609719bSwdenk 491c609719bSwdenk U-Boot stores all clock information in Hz 492c609719bSwdenk internally. For binary compatibility with older Linux 493c609719bSwdenk kernels (which expect the clocks passed in the 494c609719bSwdenk bd_info data to be in MHz) the environment variable 495c609719bSwdenk "clocks_in_mhz" can be defined so that U-Boot 496c609719bSwdenk converts clock data to MHZ before passing it to the 497c609719bSwdenk Linux kernel. 498c609719bSwdenk When CONFIG_CLOCKS_IN_MHZ is defined, a definition of 499c609719bSwdenk "clocks_in_mhz=1" is automatically included in the 500c609719bSwdenk default environment. 501c609719bSwdenk 5025da627a4Swdenk CONFIG_MEMSIZE_IN_BYTES [relevant for MIPS only] 5035da627a4Swdenk 50411ccc33fSMarcel Ziswiler When transferring memsize parameter to linux, some versions 5055da627a4Swdenk expect it to be in bytes, others in MB. 5065da627a4Swdenk Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes. 5075da627a4Swdenk 508fec6d9eeSGerald Van Baren CONFIG_OF_LIBFDT 509f57f70aaSWolfgang Denk 510f57f70aaSWolfgang Denk New kernel versions are expecting firmware settings to be 511213bf8c8SGerald Van Baren passed using flattened device trees (based on open firmware 512213bf8c8SGerald Van Baren concepts). 513213bf8c8SGerald Van Baren 514213bf8c8SGerald Van Baren CONFIG_OF_LIBFDT 515213bf8c8SGerald Van Baren * New libfdt-based support 516213bf8c8SGerald Van Baren * Adds the "fdt" command 5173bb342fcSKim Phillips * The bootm command automatically updates the fdt 518213bf8c8SGerald Van Baren 519b55ae402SMarcel Ziswiler OF_CPU - The proper name of the cpus node (only required for 520b55ae402SMarcel Ziswiler MPC512X and MPC5xxx based boards). 521b55ae402SMarcel Ziswiler OF_SOC - The proper name of the soc node (only required for 522b55ae402SMarcel Ziswiler MPC512X and MPC5xxx based boards). 523f57f70aaSWolfgang Denk OF_TBCLK - The timebase frequency. 524c2871f03SKumar Gala OF_STDOUT_PATH - The path to the console device 525f57f70aaSWolfgang Denk 52611ccc33fSMarcel Ziswiler boards with QUICC Engines require OF_QE to set UCC MAC 52711ccc33fSMarcel Ziswiler addresses 5283bb342fcSKim Phillips 5294e253137SKumar Gala CONFIG_OF_BOARD_SETUP 5304e253137SKumar Gala 5314e253137SKumar Gala Board code has addition modification that it wants to make 5324e253137SKumar Gala to the flat device tree before handing it off to the kernel 5336705d81eSwdenk 5340267768eSMatthew McClintock CONFIG_OF_BOOT_CPU 5350267768eSMatthew McClintock 53611ccc33fSMarcel Ziswiler This define fills in the correct boot CPU in the boot 5370267768eSMatthew McClintock param header, the default value is zero if undefined. 5380267768eSMatthew McClintock 5393887c3fbSHeiko Schocher CONFIG_OF_IDE_FIXUP 5403887c3fbSHeiko Schocher 5413887c3fbSHeiko Schocher U-Boot can detect if an IDE device is present or not. 5423887c3fbSHeiko Schocher If not, and this new config option is activated, U-Boot 5433887c3fbSHeiko Schocher removes the ATA node from the DTS before booting Linux, 5443887c3fbSHeiko Schocher so the Linux IDE driver does not probe the device and 5453887c3fbSHeiko Schocher crash. This is needed for buggy hardware (uc101) where 5463887c3fbSHeiko Schocher no pull down resistor is connected to the signal IDE5V_DD7. 5473887c3fbSHeiko Schocher 5487eb29398SIgor Grinberg CONFIG_MACH_TYPE [relevant for ARM only][mandatory] 5497eb29398SIgor Grinberg 5507eb29398SIgor Grinberg This setting is mandatory for all boards that have only one 5517eb29398SIgor Grinberg machine type and must be used to specify the machine type 5527eb29398SIgor Grinberg number as it appears in the ARM machine registry 5537eb29398SIgor Grinberg (see http://www.arm.linux.org.uk/developer/machines/). 5547eb29398SIgor Grinberg Only boards that have multiple machine types supported 5557eb29398SIgor Grinberg in a single configuration file and the machine type is 5567eb29398SIgor Grinberg runtime discoverable, do not have to use this setting. 5577eb29398SIgor Grinberg 5580b2f4ecaSNiklaus Giger- vxWorks boot parameters: 5590b2f4ecaSNiklaus Giger 5600b2f4ecaSNiklaus Giger bootvx constructs a valid bootline using the following 5610b2f4ecaSNiklaus Giger environments variables: bootfile, ipaddr, serverip, hostname. 5620b2f4ecaSNiklaus Giger It loads the vxWorks image pointed bootfile. 5630b2f4ecaSNiklaus Giger 5640b2f4ecaSNiklaus Giger CONFIG_SYS_VXWORKS_BOOT_DEVICE - The vxworks device name 5650b2f4ecaSNiklaus Giger CONFIG_SYS_VXWORKS_MAC_PTR - Ethernet 6 byte MA -address 5660b2f4ecaSNiklaus Giger CONFIG_SYS_VXWORKS_SERVERNAME - Name of the server 5670b2f4ecaSNiklaus Giger CONFIG_SYS_VXWORKS_BOOT_ADDR - Address of boot parameters 5680b2f4ecaSNiklaus Giger 5690b2f4ecaSNiklaus Giger CONFIG_SYS_VXWORKS_ADD_PARAMS 5700b2f4ecaSNiklaus Giger 5710b2f4ecaSNiklaus Giger Add it at the end of the bootline. E.g "u=username pw=secret" 5720b2f4ecaSNiklaus Giger 5730b2f4ecaSNiklaus Giger Note: If a "bootargs" environment is defined, it will overwride 5740b2f4ecaSNiklaus Giger the defaults discussed just above. 5750b2f4ecaSNiklaus Giger 5762c451f78SAneesh V- Cache Configuration: 5772c451f78SAneesh V CONFIG_SYS_ICACHE_OFF - Do not enable instruction cache in U-Boot 5782c451f78SAneesh V CONFIG_SYS_DCACHE_OFF - Do not enable data cache in U-Boot 5792c451f78SAneesh V CONFIG_SYS_L2CACHE_OFF- Do not enable L2 cache in U-Boot 5802c451f78SAneesh V 58193bc2193SAneesh V- Cache Configuration for ARM: 58293bc2193SAneesh V CONFIG_SYS_L2_PL310 - Enable support for ARM PL310 L2 cache 58393bc2193SAneesh V controller 58493bc2193SAneesh V CONFIG_SYS_PL310_BASE - Physical base address of PL310 58593bc2193SAneesh V controller register space 58693bc2193SAneesh V 5876705d81eSwdenk- Serial Ports: 58848d0192fSAndreas Engel CONFIG_PL010_SERIAL 5896705d81eSwdenk 5906705d81eSwdenk Define this if you want support for Amba PrimeCell PL010 UARTs. 5916705d81eSwdenk 59248d0192fSAndreas Engel CONFIG_PL011_SERIAL 5936705d81eSwdenk 5946705d81eSwdenk Define this if you want support for Amba PrimeCell PL011 UARTs. 5956705d81eSwdenk 5966705d81eSwdenk CONFIG_PL011_CLOCK 5976705d81eSwdenk 5986705d81eSwdenk If you have Amba PrimeCell PL011 UARTs, set this variable to 5996705d81eSwdenk the clock speed of the UARTs. 6006705d81eSwdenk 6016705d81eSwdenk CONFIG_PL01x_PORTS 6026705d81eSwdenk 6036705d81eSwdenk If you have Amba PrimeCell PL010 or PL011 UARTs on your board, 6046705d81eSwdenk define this to a list of base addresses for each (supported) 6056705d81eSwdenk port. See e.g. include/configs/versatile.h 6066705d81eSwdenk 607910f1ae3SJohn Rigby CONFIG_PL011_SERIAL_RLCR 608910f1ae3SJohn Rigby 609910f1ae3SJohn Rigby Some vendor versions of PL011 serial ports (e.g. ST-Ericsson U8500) 610910f1ae3SJohn Rigby have separate receive and transmit line control registers. Set 611910f1ae3SJohn Rigby this variable to initialize the extra register. 612910f1ae3SJohn Rigby 613910f1ae3SJohn Rigby CONFIG_PL011_SERIAL_FLUSH_ON_INIT 614910f1ae3SJohn Rigby 615910f1ae3SJohn Rigby On some platforms (e.g. U8500) U-Boot is loaded by a second stage 616910f1ae3SJohn Rigby boot loader that has already initialized the UART. Define this 617910f1ae3SJohn Rigby variable to flush the UART at init time. 618910f1ae3SJohn Rigby 6196705d81eSwdenk 620c609719bSwdenk- Console Interface: 621c609719bSwdenk Depending on board, define exactly one serial port 622c609719bSwdenk (like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2, 623c609719bSwdenk CONFIG_8xx_CONS_SCC1, ...), or switch off the serial 624c609719bSwdenk console by defining CONFIG_8xx_CONS_NONE 625c609719bSwdenk 626c609719bSwdenk Note: if CONFIG_8xx_CONS_NONE is defined, the serial 627c609719bSwdenk port routines must be defined elsewhere 628c609719bSwdenk (i.e. serial_init(), serial_getc(), ...) 629c609719bSwdenk 630c609719bSwdenk CONFIG_CFB_CONSOLE 631c609719bSwdenk Enables console device for a color framebuffer. Needs following 632c53043b7SWolfgang Denk defines (cf. smiLynxEM, i8042) 633c609719bSwdenk VIDEO_FB_LITTLE_ENDIAN graphic memory organisation 634c609719bSwdenk (default big endian) 635c609719bSwdenk VIDEO_HW_RECTFILL graphic chip supports 636c609719bSwdenk rectangle fill 637c609719bSwdenk (cf. smiLynxEM) 638c609719bSwdenk VIDEO_HW_BITBLT graphic chip supports 639c609719bSwdenk bit-blit (cf. smiLynxEM) 640c609719bSwdenk VIDEO_VISIBLE_COLS visible pixel columns 641c609719bSwdenk (cols=pitch) 642c609719bSwdenk VIDEO_VISIBLE_ROWS visible pixel rows 643c609719bSwdenk VIDEO_PIXEL_SIZE bytes per pixel 644c609719bSwdenk VIDEO_DATA_FORMAT graphic data format 645c609719bSwdenk (0-5, cf. cfb_console.c) 646c609719bSwdenk VIDEO_FB_ADRS framebuffer address 647c609719bSwdenk VIDEO_KBD_INIT_FCT keyboard int fct 648c609719bSwdenk (i.e. i8042_kbd_init()) 649c609719bSwdenk VIDEO_TSTC_FCT test char fct 650c609719bSwdenk (i.e. i8042_tstc) 651c609719bSwdenk VIDEO_GETC_FCT get char fct 652c609719bSwdenk (i.e. i8042_getc) 653c609719bSwdenk CONFIG_CONSOLE_CURSOR cursor drawing on/off 654c609719bSwdenk (requires blink timer 655c609719bSwdenk cf. i8042.c) 6566d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_CONSOLE_BLINK_COUNT blink interval (cf. i8042.c) 657c609719bSwdenk CONFIG_CONSOLE_TIME display time/date info in 658c609719bSwdenk upper right corner 659602ad3b3SJon Loeliger (requires CONFIG_CMD_DATE) 660c609719bSwdenk CONFIG_VIDEO_LOGO display Linux logo in 661c609719bSwdenk upper left corner 662a6c7ad2fSwdenk CONFIG_VIDEO_BMP_LOGO use bmp_logo.h instead of 663a6c7ad2fSwdenk linux_logo.h for logo. 664a6c7ad2fSwdenk Requires CONFIG_VIDEO_LOGO 665c609719bSwdenk CONFIG_CONSOLE_EXTRA_INFO 66611ccc33fSMarcel Ziswiler additional board info beside 667c609719bSwdenk the logo 668c609719bSwdenk 66933a35bbbSPali Rohár When CONFIG_CFB_CONSOLE_ANSI is defined, console will support 67033a35bbbSPali Rohár a limited number of ANSI escape sequences (cursor control, 67133a35bbbSPali Rohár erase functions and limited graphics rendition control). 67233a35bbbSPali Rohár 673c609719bSwdenk When CONFIG_CFB_CONSOLE is defined, video console is 674c609719bSwdenk default i/o. Serial console can be forced with 675c609719bSwdenk environment 'console=serial'. 676c609719bSwdenk 677a3ad8e26Swdenk When CONFIG_SILENT_CONSOLE is defined, all console 678a3ad8e26Swdenk messages (by U-Boot and Linux!) can be silenced with 679a3ad8e26Swdenk the "silent" environment variable. See 680a3ad8e26Swdenk doc/README.silent for more information. 681a3ad8e26Swdenk 682c609719bSwdenk- Console Baudrate: 683c609719bSwdenk CONFIG_BAUDRATE - in bps 684c609719bSwdenk Select one of the baudrates listed in 6856d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_BAUDRATE_TABLE, see below. 6866d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_BRGCLK_PRESCALE, baudrate prescale 687c609719bSwdenk 688c92fac91SHeiko Schocher- Console Rx buffer length 689c92fac91SHeiko Schocher With CONFIG_SYS_SMC_RXBUFLEN it is possible to define 690c92fac91SHeiko Schocher the maximum receive buffer length for the SMC. 6912b3f12c2SHeiko Schocher This option is actual only for 82xx and 8xx possible. 692c92fac91SHeiko Schocher If using CONFIG_SYS_SMC_RXBUFLEN also CONFIG_SYS_MAXIDLE 693c92fac91SHeiko Schocher must be defined, to setup the maximum idle timeout for 694c92fac91SHeiko Schocher the SMC. 695c92fac91SHeiko Schocher 6969558b48aSGraeme Russ- Pre-Console Buffer: 6979558b48aSGraeme Russ Prior to the console being initialised (i.e. serial UART 6989558b48aSGraeme Russ initialised etc) all console output is silently discarded. 6999558b48aSGraeme Russ Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to 7009558b48aSGraeme Russ buffer any console messages prior to the console being 7019558b48aSGraeme Russ initialised to a buffer of size CONFIG_PRE_CON_BUF_SZ 7029558b48aSGraeme Russ bytes located at CONFIG_PRE_CON_BUF_ADDR. The buffer is 7039558b48aSGraeme Russ a circular buffer, so if more than CONFIG_PRE_CON_BUF_SZ 7049558b48aSGraeme Russ bytes are output before the console is initialised, the 7059558b48aSGraeme Russ earlier bytes are discarded. 7069558b48aSGraeme Russ 7079558b48aSGraeme Russ 'Sane' compilers will generate smaller code if 7089558b48aSGraeme Russ CONFIG_PRE_CON_BUF_SZ is a power of 2 7099558b48aSGraeme Russ 710046a37bdSSonny Rao- Safe printf() functions 711046a37bdSSonny Rao Define CONFIG_SYS_VSNPRINTF to compile in safe versions of 712046a37bdSSonny Rao the printf() functions. These are defined in 713046a37bdSSonny Rao include/vsprintf.h and include snprintf(), vsnprintf() and 714046a37bdSSonny Rao so on. Code size increase is approximately 300-500 bytes. 715046a37bdSSonny Rao If this option is not given then these functions will 716046a37bdSSonny Rao silently discard their buffer size argument - this means 717046a37bdSSonny Rao you are not getting any overflow checking in this case. 718046a37bdSSonny Rao 719c609719bSwdenk- Boot Delay: CONFIG_BOOTDELAY - in seconds 720c609719bSwdenk Delay before automatically booting the default image; 721c609719bSwdenk set to -1 to disable autoboot. 72293d7212fSJoe Hershberger set to -2 to autoboot with no delay and not check for abort 72393d7212fSJoe Hershberger (even when CONFIG_ZERO_BOOTDELAY_CHECK is defined). 724c609719bSwdenk 725c609719bSwdenk See doc/README.autoboot for these options that 726c609719bSwdenk work with CONFIG_BOOTDELAY. None are required. 727c609719bSwdenk CONFIG_BOOT_RETRY_TIME 728c609719bSwdenk CONFIG_BOOT_RETRY_MIN 729c609719bSwdenk CONFIG_AUTOBOOT_KEYED 730c609719bSwdenk CONFIG_AUTOBOOT_PROMPT 731c609719bSwdenk CONFIG_AUTOBOOT_DELAY_STR 732c609719bSwdenk CONFIG_AUTOBOOT_STOP_STR 733c609719bSwdenk CONFIG_AUTOBOOT_DELAY_STR2 734c609719bSwdenk CONFIG_AUTOBOOT_STOP_STR2 735c609719bSwdenk CONFIG_ZERO_BOOTDELAY_CHECK 736c609719bSwdenk CONFIG_RESET_TO_RETRY 737c609719bSwdenk 738c609719bSwdenk- Autoboot Command: 739c609719bSwdenk CONFIG_BOOTCOMMAND 740c609719bSwdenk Only needed when CONFIG_BOOTDELAY is enabled; 741c609719bSwdenk define a command string that is automatically executed 742c609719bSwdenk when no character is read on the console interface 743c609719bSwdenk within "Boot Delay" after reset. 744c609719bSwdenk 745c609719bSwdenk CONFIG_BOOTARGS 746c609719bSwdenk This can be used to pass arguments to the bootm 747c609719bSwdenk command. The value of CONFIG_BOOTARGS goes into the 748c609719bSwdenk environment value "bootargs". 749c609719bSwdenk 750c609719bSwdenk CONFIG_RAMBOOT and CONFIG_NFSBOOT 751c609719bSwdenk The value of these goes into the environment as 752c609719bSwdenk "ramboot" and "nfsboot" respectively, and can be used 753c609719bSwdenk as a convenience, when switching between booting from 75411ccc33fSMarcel Ziswiler RAM and NFS. 755c609719bSwdenk 756c609719bSwdenk- Pre-Boot Commands: 757c609719bSwdenk CONFIG_PREBOOT 758c609719bSwdenk 759c609719bSwdenk When this option is #defined, the existence of the 760c609719bSwdenk environment variable "preboot" will be checked 761c609719bSwdenk immediately before starting the CONFIG_BOOTDELAY 762c609719bSwdenk countdown and/or running the auto-boot command resp. 763c609719bSwdenk entering interactive mode. 764c609719bSwdenk 765c609719bSwdenk This feature is especially useful when "preboot" is 766c609719bSwdenk automatically generated or modified. For an example 767c609719bSwdenk see the LWMON board specific code: here "preboot" is 768c609719bSwdenk modified when the user holds down a certain 769c609719bSwdenk combination of keys on the (special) keyboard when 770c609719bSwdenk booting the systems 771c609719bSwdenk 772c609719bSwdenk- Serial Download Echo Mode: 773c609719bSwdenk CONFIG_LOADS_ECHO 774c609719bSwdenk If defined to 1, all characters received during a 775c609719bSwdenk serial download (using the "loads" command) are 776c609719bSwdenk echoed back. This might be needed by some terminal 777c609719bSwdenk emulations (like "cu"), but may as well just take 778c609719bSwdenk time on others. This setting #define's the initial 779c609719bSwdenk value of the "loads_echo" environment variable. 780c609719bSwdenk 781602ad3b3SJon Loeliger- Kgdb Serial Baudrate: (if CONFIG_CMD_KGDB is defined) 782c609719bSwdenk CONFIG_KGDB_BAUDRATE 783c609719bSwdenk Select one of the baudrates listed in 7846d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_BAUDRATE_TABLE, see below. 785c609719bSwdenk 786c609719bSwdenk- Monitor Functions: 787602ad3b3SJon Loeliger Monitor commands can be included or excluded 788602ad3b3SJon Loeliger from the build by using the #include files 789c6c621bdSStephen Warren <config_cmd_all.h> and #undef'ing unwanted 790c6c621bdSStephen Warren commands, or using <config_cmd_default.h> 791602ad3b3SJon Loeliger and augmenting with additional #define's 792602ad3b3SJon Loeliger for wanted commands. 793c609719bSwdenk 794602ad3b3SJon Loeliger The default command configuration includes all commands 795602ad3b3SJon Loeliger except those marked below with a "*". 796602ad3b3SJon Loeliger 797602ad3b3SJon Loeliger CONFIG_CMD_ASKENV * ask for env variable 798602ad3b3SJon Loeliger CONFIG_CMD_BDI bdinfo 799602ad3b3SJon Loeliger CONFIG_CMD_BEDBUG * Include BedBug Debugger 800602ad3b3SJon Loeliger CONFIG_CMD_BMP * BMP support 801602ad3b3SJon Loeliger CONFIG_CMD_BSP * Board specific commands 802602ad3b3SJon Loeliger CONFIG_CMD_BOOTD bootd 803602ad3b3SJon Loeliger CONFIG_CMD_CACHE * icache, dcache 804602ad3b3SJon Loeliger CONFIG_CMD_CONSOLE coninfo 805710b9938SMike Frysinger CONFIG_CMD_CRC32 * crc32 806602ad3b3SJon Loeliger CONFIG_CMD_DATE * support for RTC, date/time... 807602ad3b3SJon Loeliger CONFIG_CMD_DHCP * DHCP support 808602ad3b3SJon Loeliger CONFIG_CMD_DIAG * Diagnostics 809a7c93104SPeter Tyser CONFIG_CMD_DS4510 * ds4510 I2C gpio commands 810a7c93104SPeter Tyser CONFIG_CMD_DS4510_INFO * ds4510 I2C info command 811a7c93104SPeter Tyser CONFIG_CMD_DS4510_MEM * ds4510 I2C eeprom/sram commansd 812a7c93104SPeter Tyser CONFIG_CMD_DS4510_RST * ds4510 I2C rst command 813602ad3b3SJon Loeliger CONFIG_CMD_DTT * Digital Therm and Thermostat 814602ad3b3SJon Loeliger CONFIG_CMD_ECHO echo arguments 815246c6922SPeter Tyser CONFIG_CMD_EDITENV edit env variable 816602ad3b3SJon Loeliger CONFIG_CMD_EEPROM * EEPROM read/write support 817602ad3b3SJon Loeliger CONFIG_CMD_ELF * bootelf, bootvx 8185e2b3e0cSJoe Hershberger CONFIG_CMD_ENV_CALLBACK * display details about env callbacks 819fffad71bSJoe Hershberger CONFIG_CMD_ENV_FLAGS * display details about env flags 8200c79cda0SMike Frysinger CONFIG_CMD_EXPORTENV * export the environment 82103e2ecf6SStephen Warren CONFIG_CMD_EXT2 * ext2 command support 82203e2ecf6SStephen Warren CONFIG_CMD_EXT4 * ext4 command support 823bdab39d3SMike Frysinger CONFIG_CMD_SAVEENV saveenv 824602ad3b3SJon Loeliger CONFIG_CMD_FDC * Floppy Disk Support 82503e2ecf6SStephen Warren CONFIG_CMD_FAT * FAT command support 826602ad3b3SJon Loeliger CONFIG_CMD_FDOS * Dos diskette Support 827602ad3b3SJon Loeliger CONFIG_CMD_FLASH flinfo, erase, protect 828602ad3b3SJon Loeliger CONFIG_CMD_FPGA FPGA device initialization support 82953fdc7efSAnton Staaf CONFIG_CMD_GETTIME * Get time since boot 830a641b979SMike Frysinger CONFIG_CMD_GO * the 'go' command (exec code) 831a000b795SKim Phillips CONFIG_CMD_GREPENV * search environment 832bf36c5d5SSimon Glass CONFIG_CMD_HASH * calculate hash / digest 833602ad3b3SJon Loeliger CONFIG_CMD_HWFLOW * RTS/CTS hw flow control 834602ad3b3SJon Loeliger CONFIG_CMD_I2C * I2C serial bus support 835602ad3b3SJon Loeliger CONFIG_CMD_IDE * IDE harddisk support 836602ad3b3SJon Loeliger CONFIG_CMD_IMI iminfo 837602ad3b3SJon Loeliger CONFIG_CMD_IMLS List all found images 838602ad3b3SJon Loeliger CONFIG_CMD_IMMAP * IMMR dump support 8390c79cda0SMike Frysinger CONFIG_CMD_IMPORTENV * import an environment 840c167cc02SJoe Hershberger CONFIG_CMD_INI * import data from an ini file into the env 841602ad3b3SJon Loeliger CONFIG_CMD_IRQ * irqinfo 842602ad3b3SJon Loeliger CONFIG_CMD_ITEST Integer/string test of 2 values 843602ad3b3SJon Loeliger CONFIG_CMD_JFFS2 * JFFS2 Support 844602ad3b3SJon Loeliger CONFIG_CMD_KGDB * kgdb 8451ba7fd25SMike Frysinger CONFIG_CMD_LDRINFO ldrinfo (display Blackfin loader) 846d22c338eSJoe Hershberger CONFIG_CMD_LINK_LOCAL * link-local IP address auto-configuration 847d22c338eSJoe Hershberger (169.254.*.*) 848602ad3b3SJon Loeliger CONFIG_CMD_LOADB loadb 849602ad3b3SJon Loeliger CONFIG_CMD_LOADS loads 85002c9aa1dSRobin Getz CONFIG_CMD_MD5SUM print md5 message digest 85102c9aa1dSRobin Getz (requires CONFIG_CMD_MEMORY and CONFIG_MD5) 852602ad3b3SJon Loeliger CONFIG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, 85356523f12Swdenk loop, loopw, mtest 854602ad3b3SJon Loeliger CONFIG_CMD_MISC Misc functions like sleep etc 855602ad3b3SJon Loeliger CONFIG_CMD_MMC * MMC memory mapped support 856602ad3b3SJon Loeliger CONFIG_CMD_MII * MII utility commands 85768d7d651SStefan Roese CONFIG_CMD_MTDPARTS * MTD partition support 858602ad3b3SJon Loeliger CONFIG_CMD_NAND * NAND support 859602ad3b3SJon Loeliger CONFIG_CMD_NET bootp, tftpboot, rarpboot 860e92739d3SPeter Tyser CONFIG_CMD_PCA953X * PCA953x I2C gpio commands 861e92739d3SPeter Tyser CONFIG_CMD_PCA953X_INFO * PCA953x I2C gpio info command 862602ad3b3SJon Loeliger CONFIG_CMD_PCI * pciinfo 863602ad3b3SJon Loeliger CONFIG_CMD_PCMCIA * PCMCIA support 864602ad3b3SJon Loeliger CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network 865602ad3b3SJon Loeliger host 866602ad3b3SJon Loeliger CONFIG_CMD_PORTIO * Port I/O 867ff048ea9SKenneth Waters CONFIG_CMD_READ * Read raw data from partition 868602ad3b3SJon Loeliger CONFIG_CMD_REGINFO * Register dump 869602ad3b3SJon Loeliger CONFIG_CMD_RUN run command in env variable 870602ad3b3SJon Loeliger CONFIG_CMD_SAVES * save S record dump 871602ad3b3SJon Loeliger CONFIG_CMD_SCSI * SCSI Support 872602ad3b3SJon Loeliger CONFIG_CMD_SDRAM * print SDRAM configuration information 873602ad3b3SJon Loeliger (requires CONFIG_CMD_I2C) 874602ad3b3SJon Loeliger CONFIG_CMD_SETGETDCR Support for DCR Register access 875602ad3b3SJon Loeliger (4xx only) 876f61ec45eSEric Nelson CONFIG_CMD_SF * Read/write/erase SPI NOR flash 877c6b1ee66SAlexander Holler CONFIG_CMD_SHA1SUM print sha1 memory digest 87802c9aa1dSRobin Getz (requires CONFIG_CMD_MEMORY) 87974de7aefSWolfgang Denk CONFIG_CMD_SOURCE "source" command Support 880602ad3b3SJon Loeliger CONFIG_CMD_SPI * SPI serial bus support 8817a83af07SLuca Ceresoli CONFIG_CMD_TFTPSRV * TFTP transfer in server mode 8821fb7cd49SSimon Glass CONFIG_CMD_TFTPPUT * TFTP put command (upload) 883da83bcd7SJoe Hershberger CONFIG_CMD_TIME * run command and report execution time (ARM specific) 884da83bcd7SJoe Hershberger CONFIG_CMD_TIMER * access to the system tick timer 885602ad3b3SJon Loeliger CONFIG_CMD_USB * USB support 886602ad3b3SJon Loeliger CONFIG_CMD_CDP * Cisco Discover Protocol support 887c8339f51SMarek Vasut CONFIG_CMD_MFSL * Microblaze FSL support 888c609719bSwdenk 889c609719bSwdenk 890c609719bSwdenk EXAMPLE: If you want all functions except of network 891c609719bSwdenk support you can write: 892c609719bSwdenk 893602ad3b3SJon Loeliger #include "config_cmd_all.h" 894602ad3b3SJon Loeliger #undef CONFIG_CMD_NET 895c609719bSwdenk 896213bf8c8SGerald Van Baren Other Commands: 897213bf8c8SGerald Van Baren fdt (flattened device tree) command: CONFIG_OF_LIBFDT 898c609719bSwdenk 899c609719bSwdenk Note: Don't enable the "icache" and "dcache" commands 900602ad3b3SJon Loeliger (configuration option CONFIG_CMD_CACHE) unless you know 901c609719bSwdenk what you (and your U-Boot users) are doing. Data 902c609719bSwdenk cache cannot be enabled on systems like the 8xx or 903c609719bSwdenk 8260 (where accesses to the IMMR region must be 904c609719bSwdenk uncached), and it cannot be disabled on all other 905c609719bSwdenk systems where we (mis-) use the data cache to hold an 906c609719bSwdenk initial stack and some data. 907c609719bSwdenk 908c609719bSwdenk 909c609719bSwdenk XXX - this list needs to get updated! 910c609719bSwdenk 91145ba8077SSimon Glass- Device tree: 91245ba8077SSimon Glass CONFIG_OF_CONTROL 91345ba8077SSimon Glass If this variable is defined, U-Boot will use a device tree 91445ba8077SSimon Glass to configure its devices, instead of relying on statically 91545ba8077SSimon Glass compiled #defines in the board file. This option is 91645ba8077SSimon Glass experimental and only available on a few boards. The device 91745ba8077SSimon Glass tree is available in the global data as gd->fdt_blob. 91845ba8077SSimon Glass 9192c0f79e4SSimon Glass U-Boot needs to get its device tree from somewhere. This can 9202c0f79e4SSimon Glass be done using one of the two options below: 921bbb0b128SSimon Glass 922bbb0b128SSimon Glass CONFIG_OF_EMBED 923bbb0b128SSimon Glass If this variable is defined, U-Boot will embed a device tree 924bbb0b128SSimon Glass binary in its image. This device tree file should be in the 925bbb0b128SSimon Glass board directory and called <soc>-<board>.dts. The binary file 926bbb0b128SSimon Glass is then picked up in board_init_f() and made available through 927bbb0b128SSimon Glass the global data structure as gd->blob. 92845ba8077SSimon Glass 9292c0f79e4SSimon Glass CONFIG_OF_SEPARATE 9302c0f79e4SSimon Glass If this variable is defined, U-Boot will build a device tree 9312c0f79e4SSimon Glass binary. It will be called u-boot.dtb. Architecture-specific 9322c0f79e4SSimon Glass code will locate it at run-time. Generally this works by: 9332c0f79e4SSimon Glass 9342c0f79e4SSimon Glass cat u-boot.bin u-boot.dtb >image.bin 9352c0f79e4SSimon Glass 9362c0f79e4SSimon Glass and in fact, U-Boot does this for you, creating a file called 9372c0f79e4SSimon Glass u-boot-dtb.bin which is useful in the common case. You can 9382c0f79e4SSimon Glass still use the individual files if you need something more 9392c0f79e4SSimon Glass exotic. 9402c0f79e4SSimon Glass 941c609719bSwdenk- Watchdog: 942c609719bSwdenk CONFIG_WATCHDOG 943c609719bSwdenk If this variable is defined, it enables watchdog 9446abe6fb6SDetlev Zundel support for the SoC. There must be support in the SoC 9456abe6fb6SDetlev Zundel specific code for a watchdog. For the 8xx and 8260 9466abe6fb6SDetlev Zundel CPUs, the SIU Watchdog feature is enabled in the SYPCR 9476abe6fb6SDetlev Zundel register. When supported for a specific SoC is 9486abe6fb6SDetlev Zundel available, then no further board specific code should 9496abe6fb6SDetlev Zundel be needed to use it. 9506abe6fb6SDetlev Zundel 9516abe6fb6SDetlev Zundel CONFIG_HW_WATCHDOG 9526abe6fb6SDetlev Zundel When using a watchdog circuitry external to the used 9536abe6fb6SDetlev Zundel SoC, then define this variable and provide board 9546abe6fb6SDetlev Zundel specific code for the "hw_watchdog_reset" function. 955c609719bSwdenk 956c1551ea8Sstroese- U-Boot Version: 957c1551ea8Sstroese CONFIG_VERSION_VARIABLE 958c1551ea8Sstroese If this variable is defined, an environment variable 959c1551ea8Sstroese named "ver" is created by U-Boot showing the U-Boot 960c1551ea8Sstroese version as printed by the "version" command. 961a1ea8e51SBenoît Thébaudeau Any change to this variable will be reverted at the 962a1ea8e51SBenoît Thébaudeau next reset. 963c1551ea8Sstroese 964c609719bSwdenk- Real-Time Clock: 965c609719bSwdenk 966602ad3b3SJon Loeliger When CONFIG_CMD_DATE is selected, the type of the RTC 967c609719bSwdenk has to be selected, too. Define exactly one of the 968c609719bSwdenk following options: 969c609719bSwdenk 970c609719bSwdenk CONFIG_RTC_MPC8xx - use internal RTC of MPC8xx 971c609719bSwdenk CONFIG_RTC_PCF8563 - use Philips PCF8563 RTC 9724e8b7544SFabio Estevam CONFIG_RTC_MC13XXX - use MC13783 or MC13892 RTC 973c609719bSwdenk CONFIG_RTC_MC146818 - use MC146818 RTC 9741cb8e980Swdenk CONFIG_RTC_DS1307 - use Maxim, Inc. DS1307 RTC 975c609719bSwdenk CONFIG_RTC_DS1337 - use Maxim, Inc. DS1337 RTC 9767f70e853Swdenk CONFIG_RTC_DS1338 - use Maxim, Inc. DS1338 RTC 9773bac3513Swdenk CONFIG_RTC_DS164x - use Dallas DS164x RTC 9789536dfccSTor Krill CONFIG_RTC_ISL1208 - use Intersil ISL1208 RTC 9794c0d4c3bSwdenk CONFIG_RTC_MAX6900 - use Maxim, Inc. MAX6900 RTC 9806d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_RTC_DS1337_NOOSC - Turn off the OSC output for DS1337 98171d19f30SHeiko Schocher CONFIG_SYS_RV3029_TCR - enable trickle charger on 98271d19f30SHeiko Schocher RV3029 RTC. 983c609719bSwdenk 984b37c7e5eSwdenk Note that if the RTC uses I2C, then the I2C interface 985b37c7e5eSwdenk must also be configured. See I2C Support, below. 986b37c7e5eSwdenk 987e92739d3SPeter Tyser- GPIO Support: 988e92739d3SPeter Tyser CONFIG_PCA953X - use NXP's PCA953X series I2C GPIO 989e92739d3SPeter Tyser CONFIG_PCA953X_INFO - enable pca953x info command 990e92739d3SPeter Tyser 9915dec49caSChris Packham The CONFIG_SYS_I2C_PCA953X_WIDTH option specifies a list of 9925dec49caSChris Packham chip-ngpio pairs that tell the PCA953X driver the number of 9935dec49caSChris Packham pins supported by a particular chip. 9945dec49caSChris Packham 995e92739d3SPeter Tyser Note that if the GPIO device uses I2C, then the I2C interface 996e92739d3SPeter Tyser must also be configured. See I2C Support, below. 997e92739d3SPeter Tyser 998c609719bSwdenk- Timestamp Support: 999c609719bSwdenk 1000c609719bSwdenk When CONFIG_TIMESTAMP is selected, the timestamp 1001c609719bSwdenk (date and time) of an image is printed by image 1002c609719bSwdenk commands like bootm or iminfo. This option is 1003602ad3b3SJon Loeliger automatically enabled when you select CONFIG_CMD_DATE . 1004c609719bSwdenk 1005923c46f9SKarl O. Pinc- Partition Labels (disklabels) Supported: 1006923c46f9SKarl O. Pinc Zero or more of the following: 1007923c46f9SKarl O. Pinc CONFIG_MAC_PARTITION Apple's MacOS partition table. 1008923c46f9SKarl O. Pinc CONFIG_DOS_PARTITION MS Dos partition table, traditional on the 1009923c46f9SKarl O. Pinc Intel architecture, USB sticks, etc. 1010923c46f9SKarl O. Pinc CONFIG_ISO_PARTITION ISO partition table, used on CDROM etc. 1011923c46f9SKarl O. Pinc CONFIG_EFI_PARTITION GPT partition table, common when EFI is the 1012923c46f9SKarl O. Pinc bootloader. Note 2TB partition limit; see 1013923c46f9SKarl O. Pinc disk/part_efi.c 1014923c46f9SKarl O. Pinc CONFIG_MTD_PARTITIONS Memory Technology Device partition table. 1015c609719bSwdenk 1016602ad3b3SJon Loeliger If IDE or SCSI support is enabled (CONFIG_CMD_IDE or 1017218ca724SWolfgang Denk CONFIG_CMD_SCSI) you must configure support for at 1018923c46f9SKarl O. Pinc least one non-MTD partition type as well. 1019c609719bSwdenk 1020c609719bSwdenk- IDE Reset method: 10214d13cbadSwdenk CONFIG_IDE_RESET_ROUTINE - this is defined in several 10224d13cbadSwdenk board configurations files but used nowhere! 1023c609719bSwdenk 10244d13cbadSwdenk CONFIG_IDE_RESET - is this is defined, IDE Reset will 10254d13cbadSwdenk be performed by calling the function 10264d13cbadSwdenk ide_set_reset(int reset) 10274d13cbadSwdenk which has to be defined in a board specific file 1028c609719bSwdenk 1029c609719bSwdenk- ATAPI Support: 1030c609719bSwdenk CONFIG_ATAPI 1031c609719bSwdenk 1032c609719bSwdenk Set this to enable ATAPI support. 1033c609719bSwdenk 1034c40b2956Swdenk- LBA48 Support 1035c40b2956Swdenk CONFIG_LBA48 1036c40b2956Swdenk 1037c40b2956Swdenk Set this to enable support for disks larger than 137GB 10384b142febSHeiko Schocher Also look at CONFIG_SYS_64BIT_LBA. 1039c40b2956Swdenk Whithout these , LBA48 support uses 32bit variables and will 'only' 1040c40b2956Swdenk support disks up to 2.1TB. 1041c40b2956Swdenk 10426d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_64BIT_LBA: 1043c40b2956Swdenk When enabled, makes the IDE subsystem use 64bit sector addresses. 1044c40b2956Swdenk Default is 32bit. 1045c40b2956Swdenk 1046c609719bSwdenk- SCSI Support: 1047c609719bSwdenk At the moment only there is only support for the 1048c609719bSwdenk SYM53C8XX SCSI controller; define 1049c609719bSwdenk CONFIG_SCSI_SYM53C8XX to enable it. 1050c609719bSwdenk 10516d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SCSI_MAX_LUN [8], CONFIG_SYS_SCSI_MAX_SCSI_ID [7] and 10526d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SCSI_MAX_DEVICE [CONFIG_SYS_SCSI_MAX_SCSI_ID * 10536d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SCSI_MAX_LUN] can be adjusted to define the 1054c609719bSwdenk maximum numbers of LUNs, SCSI ID's and target 1055c609719bSwdenk devices. 10566d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz) 1057c609719bSwdenk 1058447c031bSStefan Reinauer The environment variable 'scsidevs' is set to the number of 1059447c031bSStefan Reinauer SCSI devices found during the last scan. 1060447c031bSStefan Reinauer 1061c609719bSwdenk- NETWORK Support (PCI): 1062682011ffSwdenk CONFIG_E1000 1063ce5207e1SKyle Moffett Support for Intel 8254x/8257x gigabit chips. 1064ce5207e1SKyle Moffett 1065ce5207e1SKyle Moffett CONFIG_E1000_SPI 1066ce5207e1SKyle Moffett Utility code for direct access to the SPI bus on Intel 8257x. 1067ce5207e1SKyle Moffett This does not do anything useful unless you set at least one 1068ce5207e1SKyle Moffett of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC. 1069ce5207e1SKyle Moffett 1070ce5207e1SKyle Moffett CONFIG_E1000_SPI_GENERIC 1071ce5207e1SKyle Moffett Allow generic access to the SPI bus on the Intel 8257x, for 1072ce5207e1SKyle Moffett example with the "sspi" command. 1073ce5207e1SKyle Moffett 1074ce5207e1SKyle Moffett CONFIG_CMD_E1000 1075ce5207e1SKyle Moffett Management command for E1000 devices. When used on devices 1076ce5207e1SKyle Moffett with SPI support you can reprogram the EEPROM from U-Boot. 1077682011ffSwdenk 1078ac3315c2SAndre Schwarz CONFIG_E1000_FALLBACK_MAC 107911ccc33fSMarcel Ziswiler default MAC for empty EEPROM after production. 1080ac3315c2SAndre Schwarz 1081c609719bSwdenk CONFIG_EEPRO100 1082c609719bSwdenk Support for Intel 82557/82559/82559ER chips. 108311ccc33fSMarcel Ziswiler Optional CONFIG_EEPRO100_SROM_WRITE enables EEPROM 1084c609719bSwdenk write routine for first time initialisation. 1085c609719bSwdenk 1086c609719bSwdenk CONFIG_TULIP 1087c609719bSwdenk Support for Digital 2114x chips. 1088c609719bSwdenk Optional CONFIG_TULIP_SELECT_MEDIA for board specific 1089c609719bSwdenk modem chip initialisation (KS8761/QS6611). 1090c609719bSwdenk 1091c609719bSwdenk CONFIG_NATSEMI 1092c609719bSwdenk Support for National dp83815 chips. 1093c609719bSwdenk 1094c609719bSwdenk CONFIG_NS8382X 1095c609719bSwdenk Support for National dp8382[01] gigabit chips. 1096c609719bSwdenk 109745219c46Swdenk- NETWORK Support (other): 109845219c46Swdenk 1099c041e9d2SJens Scharsig CONFIG_DRIVER_AT91EMAC 1100c041e9d2SJens Scharsig Support for AT91RM9200 EMAC. 1101c041e9d2SJens Scharsig 1102c041e9d2SJens Scharsig CONFIG_RMII 1103c041e9d2SJens Scharsig Define this to use reduced MII inteface 1104c041e9d2SJens Scharsig 1105c041e9d2SJens Scharsig CONFIG_DRIVER_AT91EMAC_QUIET 1106c041e9d2SJens Scharsig If this defined, the driver is quiet. 1107c041e9d2SJens Scharsig The driver doen't show link status messages. 1108c041e9d2SJens Scharsig 1109efdd7319SRob Herring CONFIG_CALXEDA_XGMAC 1110efdd7319SRob Herring Support for the Calxeda XGMAC device 1111efdd7319SRob Herring 11123bb46d23SAshok CONFIG_LAN91C96 111345219c46Swdenk Support for SMSC's LAN91C96 chips. 111445219c46Swdenk 111545219c46Swdenk CONFIG_LAN91C96_BASE 111645219c46Swdenk Define this to hold the physical address 111745219c46Swdenk of the LAN91C96's I/O space 111845219c46Swdenk 111945219c46Swdenk CONFIG_LAN91C96_USE_32_BIT 112045219c46Swdenk Define this to enable 32 bit addressing 112145219c46Swdenk 11223bb46d23SAshok CONFIG_SMC91111 1123f39748aeSwdenk Support for SMSC's LAN91C111 chip 1124f39748aeSwdenk 1125f39748aeSwdenk CONFIG_SMC91111_BASE 1126f39748aeSwdenk Define this to hold the physical address 1127f39748aeSwdenk of the device (I/O space) 1128f39748aeSwdenk 1129f39748aeSwdenk CONFIG_SMC_USE_32_BIT 1130f39748aeSwdenk Define this if data bus is 32 bits 1131f39748aeSwdenk 1132f39748aeSwdenk CONFIG_SMC_USE_IOFUNCS 1133f39748aeSwdenk Define this to use i/o functions instead of macros 1134f39748aeSwdenk (some hardware wont work with macros) 1135f39748aeSwdenk 1136dc02badaSHeiko Schocher CONFIG_DRIVER_TI_EMAC 1137dc02badaSHeiko Schocher Support for davinci emac 1138dc02badaSHeiko Schocher 1139dc02badaSHeiko Schocher CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT 1140dc02badaSHeiko Schocher Define this if you have more then 3 PHYs. 1141dc02badaSHeiko Schocher 1142b3dbf4a5SMacpaul Lin CONFIG_FTGMAC100 1143b3dbf4a5SMacpaul Lin Support for Faraday's FTGMAC100 Gigabit SoC Ethernet 1144b3dbf4a5SMacpaul Lin 1145b3dbf4a5SMacpaul Lin CONFIG_FTGMAC100_EGIGA 1146b3dbf4a5SMacpaul Lin Define this to use GE link update with gigabit PHY. 1147b3dbf4a5SMacpaul Lin Define this if FTGMAC100 is connected to gigabit PHY. 1148b3dbf4a5SMacpaul Lin If your system has 10/100 PHY only, it might not occur 1149b3dbf4a5SMacpaul Lin wrong behavior. Because PHY usually return timeout or 1150b3dbf4a5SMacpaul Lin useless data when polling gigabit status and gigabit 1151b3dbf4a5SMacpaul Lin control registers. This behavior won't affect the 1152b3dbf4a5SMacpaul Lin correctnessof 10/100 link speed update. 1153b3dbf4a5SMacpaul Lin 1154c2fff331SMike Rapoport CONFIG_SMC911X 1155557b377dSJens Gehrlein Support for SMSC's LAN911x and LAN921x chips 1156557b377dSJens Gehrlein 1157c2fff331SMike Rapoport CONFIG_SMC911X_BASE 1158557b377dSJens Gehrlein Define this to hold the physical address 1159557b377dSJens Gehrlein of the device (I/O space) 1160557b377dSJens Gehrlein 1161c2fff331SMike Rapoport CONFIG_SMC911X_32_BIT 1162557b377dSJens Gehrlein Define this if data bus is 32 bits 1163557b377dSJens Gehrlein 1164c2fff331SMike Rapoport CONFIG_SMC911X_16_BIT 1165557b377dSJens Gehrlein Define this if data bus is 16 bits. If your processor 1166557b377dSJens Gehrlein automatically converts one 32 bit word to two 16 bit 1167c2fff331SMike Rapoport words you may also try CONFIG_SMC911X_32_BIT. 1168557b377dSJens Gehrlein 11693d0075faSYoshihiro Shimoda CONFIG_SH_ETHER 11703d0075faSYoshihiro Shimoda Support for Renesas on-chip Ethernet controller 11713d0075faSYoshihiro Shimoda 11723d0075faSYoshihiro Shimoda CONFIG_SH_ETHER_USE_PORT 11733d0075faSYoshihiro Shimoda Define the number of ports to be used 11743d0075faSYoshihiro Shimoda 11753d0075faSYoshihiro Shimoda CONFIG_SH_ETHER_PHY_ADDR 11763d0075faSYoshihiro Shimoda Define the ETH PHY's address 11773d0075faSYoshihiro Shimoda 117868260aabSYoshihiro Shimoda CONFIG_SH_ETHER_CACHE_WRITEBACK 117968260aabSYoshihiro Shimoda If this option is set, the driver enables cache flush. 118068260aabSYoshihiro Shimoda 11815e124724SVadim Bendebury- TPM Support: 11825e124724SVadim Bendebury CONFIG_GENERIC_LPC_TPM 11835e124724SVadim Bendebury Support for generic parallel port TPM devices. Only one device 11845e124724SVadim Bendebury per system is supported at this time. 11855e124724SVadim Bendebury 11865e124724SVadim Bendebury CONFIG_TPM_TIS_BASE_ADDRESS 11875e124724SVadim Bendebury Base address where the generic TPM device is mapped 11885e124724SVadim Bendebury to. Contemporary x86 systems usually map it at 11895e124724SVadim Bendebury 0xfed40000. 11905e124724SVadim Bendebury 1191c609719bSwdenk- USB Support: 1192c609719bSwdenk At the moment only the UHCI host controller is 11934d13cbadSwdenk supported (PIP405, MIP405, MPC5200); define 1194c609719bSwdenk CONFIG_USB_UHCI to enable it. 1195c609719bSwdenk define CONFIG_USB_KEYBOARD to enable the USB Keyboard 119630d56faeSwdenk and define CONFIG_USB_STORAGE to enable the USB 1197c609719bSwdenk storage devices. 1198c609719bSwdenk Note: 1199c609719bSwdenk Supported are USB Keyboards and USB Floppy drives 1200c609719bSwdenk (TEAC FD-05PUB). 12014d13cbadSwdenk MPC5200 USB requires additional defines: 12024d13cbadSwdenk CONFIG_USB_CLOCK 12034d13cbadSwdenk for 528 MHz Clock: 0x0001bbbb 1204307ecb6dSEric Millbrandt CONFIG_PSC3_USB 1205307ecb6dSEric Millbrandt for USB on PSC3 12064d13cbadSwdenk CONFIG_USB_CONFIG 12074d13cbadSwdenk for differential drivers: 0x00001000 12084d13cbadSwdenk for single ended drivers: 0x00005000 1209307ecb6dSEric Millbrandt for differential drivers on PSC3: 0x00000100 1210307ecb6dSEric Millbrandt for single ended drivers on PSC3: 0x00004100 12116d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_USB_EVENT_POLL 1212fdcfaa1bSZhang Wei May be defined to allow interrupt polling 1213fdcfaa1bSZhang Wei instead of using asynchronous interrupts 12144d13cbadSwdenk 12159ab4ce22SSimon Glass CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the 12169ab4ce22SSimon Glass txfilltuning field in the EHCI controller on reset. 12179ab4ce22SSimon Glass 121816c8d5e7SWolfgang Denk- USB Device: 121916c8d5e7SWolfgang Denk Define the below if you wish to use the USB console. 122016c8d5e7SWolfgang Denk Once firmware is rebuilt from a serial console issue the 122116c8d5e7SWolfgang Denk command "setenv stdin usbtty; setenv stdout usbtty" and 122211ccc33fSMarcel Ziswiler attach your USB cable. The Unix command "dmesg" should print 122316c8d5e7SWolfgang Denk it has found a new device. The environment variable usbtty 122416c8d5e7SWolfgang Denk can be set to gserial or cdc_acm to enable your device to 122516c8d5e7SWolfgang Denk appear to a USB host as a Linux gserial device or a 122616c8d5e7SWolfgang Denk Common Device Class Abstract Control Model serial device. 122716c8d5e7SWolfgang Denk If you select usbtty = gserial you should be able to enumerate 122816c8d5e7SWolfgang Denk a Linux host by 122916c8d5e7SWolfgang Denk # modprobe usbserial vendor=0xVendorID product=0xProductID 123016c8d5e7SWolfgang Denk else if using cdc_acm, simply setting the environment 123116c8d5e7SWolfgang Denk variable usbtty to be cdc_acm should suffice. The following 123216c8d5e7SWolfgang Denk might be defined in YourBoardName.h 123316c8d5e7SWolfgang Denk 123416c8d5e7SWolfgang Denk CONFIG_USB_DEVICE 123516c8d5e7SWolfgang Denk Define this to build a UDC device 123616c8d5e7SWolfgang Denk 123716c8d5e7SWolfgang Denk CONFIG_USB_TTY 123816c8d5e7SWolfgang Denk Define this to have a tty type of device available to 123916c8d5e7SWolfgang Denk talk to the UDC device 124016c8d5e7SWolfgang Denk 1241f9da0f89SVipin KUMAR CONFIG_USBD_HS 1242f9da0f89SVipin KUMAR Define this to enable the high speed support for usb 1243f9da0f89SVipin KUMAR device and usbtty. If this feature is enabled, a routine 1244f9da0f89SVipin KUMAR int is_usbd_high_speed(void) 1245f9da0f89SVipin KUMAR also needs to be defined by the driver to dynamically poll 1246f9da0f89SVipin KUMAR whether the enumeration has succeded at high speed or full 1247f9da0f89SVipin KUMAR speed. 1248f9da0f89SVipin KUMAR 12496d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_CONSOLE_IS_IN_ENV 125016c8d5e7SWolfgang Denk Define this if you want stdin, stdout &/or stderr to 125116c8d5e7SWolfgang Denk be set to usbtty. 125216c8d5e7SWolfgang Denk 125316c8d5e7SWolfgang Denk mpc8xx: 12546d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_USB_EXTC_CLK 0xBLAH 125516c8d5e7SWolfgang Denk Derive USB clock from external clock "blah" 12566d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_USB_EXTC_CLK 0x02 125716c8d5e7SWolfgang Denk 12586d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_USB_BRG_CLK 0xBLAH 125916c8d5e7SWolfgang Denk Derive USB clock from brgclk 12606d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_USB_BRG_CLK 0x04 126116c8d5e7SWolfgang Denk 126216c8d5e7SWolfgang Denk If you have a USB-IF assigned VendorID then you may wish to 126316c8d5e7SWolfgang Denk define your own vendor specific values either in BoardName.h 126416c8d5e7SWolfgang Denk or directly in usbd_vendor_info.h. If you don't define 126516c8d5e7SWolfgang Denk CONFIG_USBD_MANUFACTURER, CONFIG_USBD_PRODUCT_NAME, 126616c8d5e7SWolfgang Denk CONFIG_USBD_VENDORID and CONFIG_USBD_PRODUCTID, then U-Boot 126716c8d5e7SWolfgang Denk should pretend to be a Linux device to it's target host. 126816c8d5e7SWolfgang Denk 126916c8d5e7SWolfgang Denk CONFIG_USBD_MANUFACTURER 127016c8d5e7SWolfgang Denk Define this string as the name of your company for 127116c8d5e7SWolfgang Denk - CONFIG_USBD_MANUFACTURER "my company" 127216c8d5e7SWolfgang Denk 127316c8d5e7SWolfgang Denk CONFIG_USBD_PRODUCT_NAME 127416c8d5e7SWolfgang Denk Define this string as the name of your product 127516c8d5e7SWolfgang Denk - CONFIG_USBD_PRODUCT_NAME "acme usb device" 127616c8d5e7SWolfgang Denk 127716c8d5e7SWolfgang Denk CONFIG_USBD_VENDORID 127816c8d5e7SWolfgang Denk Define this as your assigned Vendor ID from the USB 127916c8d5e7SWolfgang Denk Implementors Forum. This *must* be a genuine Vendor ID 128016c8d5e7SWolfgang Denk to avoid polluting the USB namespace. 128116c8d5e7SWolfgang Denk - CONFIG_USBD_VENDORID 0xFFFF 128216c8d5e7SWolfgang Denk 128316c8d5e7SWolfgang Denk CONFIG_USBD_PRODUCTID 128416c8d5e7SWolfgang Denk Define this as the unique Product ID 128516c8d5e7SWolfgang Denk for your device 128616c8d5e7SWolfgang Denk - CONFIG_USBD_PRODUCTID 0xFFFF 1287c609719bSwdenk 1288d70a560fSIgor Grinberg- ULPI Layer Support: 1289d70a560fSIgor Grinberg The ULPI (UTMI Low Pin (count) Interface) PHYs are supported via 1290d70a560fSIgor Grinberg the generic ULPI layer. The generic layer accesses the ULPI PHY 1291d70a560fSIgor Grinberg via the platform viewport, so you need both the genric layer and 1292d70a560fSIgor Grinberg the viewport enabled. Currently only Chipidea/ARC based 1293d70a560fSIgor Grinberg viewport is supported. 1294d70a560fSIgor Grinberg To enable the ULPI layer support, define CONFIG_USB_ULPI and 1295d70a560fSIgor Grinberg CONFIG_USB_ULPI_VIEWPORT in your board configuration file. 12966d365ea0SLucas Stach If your ULPI phy needs a different reference clock than the 12976d365ea0SLucas Stach standard 24 MHz then you have to define CONFIG_ULPI_REF_CLK to 12986d365ea0SLucas Stach the appropriate value in Hz. 1299c609719bSwdenk 1300c609719bSwdenk- MMC Support: 1301c609719bSwdenk The MMC controller on the Intel PXA is supported. To 1302c609719bSwdenk enable this define CONFIG_MMC. The MMC can be 1303c609719bSwdenk accessed from the boot prompt by mapping the device 1304c609719bSwdenk to physical memory similar to flash. Command line is 1305602ad3b3SJon Loeliger enabled with CONFIG_CMD_MMC. The MMC driver also works with 1306602ad3b3SJon Loeliger the FAT fs. This is enabled with CONFIG_CMD_FAT. 1307c609719bSwdenk 1308afb35666SYoshihiro Shimoda CONFIG_SH_MMCIF 1309afb35666SYoshihiro Shimoda Support for Renesas on-chip MMCIF controller 1310afb35666SYoshihiro Shimoda 1311afb35666SYoshihiro Shimoda CONFIG_SH_MMCIF_ADDR 1312afb35666SYoshihiro Shimoda Define the base address of MMCIF registers 1313afb35666SYoshihiro Shimoda 1314afb35666SYoshihiro Shimoda CONFIG_SH_MMCIF_CLK 1315afb35666SYoshihiro Shimoda Define the clock frequency for MMCIF 1316afb35666SYoshihiro Shimoda 13176705d81eSwdenk- Journaling Flash filesystem support: 13186705d81eSwdenk CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE, 13196705d81eSwdenk CONFIG_JFFS2_NAND_DEV 13206705d81eSwdenk Define these for a default partition on a NAND device 13216705d81eSwdenk 13226d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_JFFS2_FIRST_SECTOR, 13236d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_JFFS2_FIRST_BANK, CONFIG_SYS_JFFS2_NUM_BANKS 13246705d81eSwdenk Define these for a default partition on a NOR device 13256705d81eSwdenk 13266d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_JFFS_CUSTOM_PART 13276705d81eSwdenk Define this to create an own partition. You have to provide a 13286705d81eSwdenk function struct part_info* jffs2_part_info(int part_num) 13296705d81eSwdenk 13306705d81eSwdenk If you define only one JFFS2 partition you may also want to 13316d0f6bcfSJean-Christophe PLAGNIOL-VILLARD #define CONFIG_SYS_JFFS_SINGLE_PART 1 13326705d81eSwdenk to disable the command chpart. This is the default when you 13336705d81eSwdenk have not defined a custom partition 13346705d81eSwdenk 1335c30a15e5SDonggeun Kim- FAT(File Allocation Table) filesystem write function support: 1336c30a15e5SDonggeun Kim CONFIG_FAT_WRITE 1337656f4c65SDonggeun Kim 1338656f4c65SDonggeun Kim Define this to enable support for saving memory data as a 1339656f4c65SDonggeun Kim file in FAT formatted partition. 1340656f4c65SDonggeun Kim 1341656f4c65SDonggeun Kim This will also enable the command "fatwrite" enabling the 1342656f4c65SDonggeun Kim user to write files to FAT. 1343c30a15e5SDonggeun Kim 134484cd9327SGabe BlackCBFS (Coreboot Filesystem) support 134584cd9327SGabe Black CONFIG_CMD_CBFS 134684cd9327SGabe Black 134784cd9327SGabe Black Define this to enable support for reading from a Coreboot 134884cd9327SGabe Black filesystem. Available commands are cbfsinit, cbfsinfo, cbfsls 134984cd9327SGabe Black and cbfsload. 135084cd9327SGabe Black 1351c609719bSwdenk- Keyboard Support: 1352c609719bSwdenk CONFIG_ISA_KEYBOARD 1353c609719bSwdenk 1354c609719bSwdenk Define this to enable standard (PC-Style) keyboard 1355c609719bSwdenk support 1356c609719bSwdenk 1357c609719bSwdenk CONFIG_I8042_KBD 1358c609719bSwdenk Standard PC keyboard driver with US (is default) and 1359c609719bSwdenk GERMAN key layout (switch via environment 'keymap=de') support. 1360c609719bSwdenk Export function i8042_kbd_init, i8042_tstc and i8042_getc 1361c609719bSwdenk for cfb_console. Supports cursor blinking. 1362c609719bSwdenk 1363c609719bSwdenk- Video support: 1364c609719bSwdenk CONFIG_VIDEO 1365c609719bSwdenk 1366c609719bSwdenk Define this to enable video support (for output to 1367c609719bSwdenk video). 1368c609719bSwdenk 1369c609719bSwdenk CONFIG_VIDEO_CT69000 1370c609719bSwdenk 1371c609719bSwdenk Enable Chips & Technologies 69000 Video chip 1372c609719bSwdenk 1373c609719bSwdenk CONFIG_VIDEO_SMI_LYNXEM 1374eeb1b77bSwdenk Enable Silicon Motion SMI 712/710/810 Video chip. The 1375eeb1b77bSwdenk video output is selected via environment 'videoout' 1376eeb1b77bSwdenk (1 = LCD and 2 = CRT). If videoout is undefined, CRT is 1377eeb1b77bSwdenk assumed. 1378c609719bSwdenk 1379eeb1b77bSwdenk For the CT69000 and SMI_LYNXEM drivers, videomode is 138011ccc33fSMarcel Ziswiler selected via environment 'videomode'. Two different ways 1381eeb1b77bSwdenk are possible: 1382eeb1b77bSwdenk - "videomode=num" 'num' is a standard LiLo mode numbers. 1383eeb1b77bSwdenk Following standard modes are supported (* is default): 1384eeb1b77bSwdenk 1385eeb1b77bSwdenk Colors 640x480 800x600 1024x768 1152x864 1280x1024 1386eeb1b77bSwdenk -------------+--------------------------------------------- 1387eeb1b77bSwdenk 8 bits | 0x301* 0x303 0x305 0x161 0x307 1388eeb1b77bSwdenk 15 bits | 0x310 0x313 0x316 0x162 0x319 1389eeb1b77bSwdenk 16 bits | 0x311 0x314 0x317 0x163 0x31A 1390eeb1b77bSwdenk 24 bits | 0x312 0x315 0x318 ? 0x31B 1391eeb1b77bSwdenk -------------+--------------------------------------------- 1392c609719bSwdenk (i.e. setenv videomode 317; saveenv; reset;) 1393c609719bSwdenk 1394eeb1b77bSwdenk - "videomode=bootargs" all the video parameters are parsed 13957817cb20SMarcel Ziswiler from the bootargs. (See drivers/video/videomodes.c) 1396eeb1b77bSwdenk 1397eeb1b77bSwdenk 1398a6c7ad2fSwdenk CONFIG_VIDEO_SED13806 1399a6c7ad2fSwdenk Enable Epson SED13806 driver. This driver supports 8bpp 1400a6c7ad2fSwdenk and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP 1401a6c7ad2fSwdenk or CONFIG_VIDEO_SED13806_16BPP 1402a6c7ad2fSwdenk 14037d3053fbSTimur Tabi CONFIG_FSL_DIU_FB 14047d3053fbSTimur Tabi Enable the Freescale DIU video driver. Reference boards for 14057d3053fbSTimur Tabi SOCs that have a DIU should define this macro to enable DIU 14067d3053fbSTimur Tabi support, and should also define these other macros: 14077d3053fbSTimur Tabi 14087d3053fbSTimur Tabi CONFIG_SYS_DIU_ADDR 14097d3053fbSTimur Tabi CONFIG_VIDEO 14107d3053fbSTimur Tabi CONFIG_CMD_BMP 14117d3053fbSTimur Tabi CONFIG_CFB_CONSOLE 14127d3053fbSTimur Tabi CONFIG_VIDEO_SW_CURSOR 14137d3053fbSTimur Tabi CONFIG_VGA_AS_SINGLE_DEVICE 14147d3053fbSTimur Tabi CONFIG_VIDEO_LOGO 14157d3053fbSTimur Tabi CONFIG_VIDEO_BMP_LOGO 14167d3053fbSTimur Tabi 1417ba8e76bdSTimur Tabi The DIU driver will look for the 'video-mode' environment 1418ba8e76bdSTimur Tabi variable, and if defined, enable the DIU as a console during 1419ba8e76bdSTimur Tabi boot. See the documentation file README.video for a 1420ba8e76bdSTimur Tabi description of this variable. 14217d3053fbSTimur Tabi 1422058d59b0SSimon Glass CONFIG_VIDEO_VGA 1423058d59b0SSimon Glass 1424058d59b0SSimon Glass Enable the VGA video / BIOS for x86. The alternative if you 1425058d59b0SSimon Glass are using coreboot is to use the coreboot frame buffer 1426058d59b0SSimon Glass driver. 1427058d59b0SSimon Glass 1428058d59b0SSimon Glass 1429682011ffSwdenk- Keyboard Support: 1430682011ffSwdenk CONFIG_KEYBOARD 1431682011ffSwdenk 1432682011ffSwdenk Define this to enable a custom keyboard support. 1433682011ffSwdenk This simply calls drv_keyboard_init() which must be 1434682011ffSwdenk defined in your board-specific files. 1435682011ffSwdenk The only board using this so far is RBC823. 1436a6c7ad2fSwdenk 1437c609719bSwdenk- LCD Support: CONFIG_LCD 1438c609719bSwdenk 1439c609719bSwdenk Define this to enable LCD support (for output to LCD 1440c609719bSwdenk display); also select one of the supported displays 1441c609719bSwdenk by defining one of these: 1442c609719bSwdenk 144339cf4804SStelian Pop CONFIG_ATMEL_LCD: 144439cf4804SStelian Pop 144539cf4804SStelian Pop HITACHI TX09D70VM1CCA, 3.5", 240x320. 144639cf4804SStelian Pop 1447fd3103bbSwdenk CONFIG_NEC_NL6448AC33: 1448c609719bSwdenk 1449fd3103bbSwdenk NEC NL6448AC33-18. Active, color, single scan. 1450c609719bSwdenk 1451fd3103bbSwdenk CONFIG_NEC_NL6448BC20 1452c609719bSwdenk 1453fd3103bbSwdenk NEC NL6448BC20-08. 6.5", 640x480. 1454fd3103bbSwdenk Active, color, single scan. 1455fd3103bbSwdenk 1456fd3103bbSwdenk CONFIG_NEC_NL6448BC33_54 1457fd3103bbSwdenk 1458fd3103bbSwdenk NEC NL6448BC33-54. 10.4", 640x480. 1459c609719bSwdenk Active, color, single scan. 1460c609719bSwdenk 1461c609719bSwdenk CONFIG_SHARP_16x9 1462c609719bSwdenk 1463c609719bSwdenk Sharp 320x240. Active, color, single scan. 1464c609719bSwdenk It isn't 16x9, and I am not sure what it is. 1465c609719bSwdenk 1466c609719bSwdenk CONFIG_SHARP_LQ64D341 1467c609719bSwdenk 1468c609719bSwdenk Sharp LQ64D341 display, 640x480. 1469c609719bSwdenk Active, color, single scan. 1470c609719bSwdenk 1471c609719bSwdenk CONFIG_HLD1045 1472c609719bSwdenk 1473c609719bSwdenk HLD1045 display, 640x480. 1474c609719bSwdenk Active, color, single scan. 1475c609719bSwdenk 1476c609719bSwdenk CONFIG_OPTREX_BW 1477c609719bSwdenk 1478c609719bSwdenk Optrex CBL50840-2 NF-FW 99 22 M5 1479c609719bSwdenk or 1480c609719bSwdenk Hitachi LMG6912RPFC-00T 1481c609719bSwdenk or 1482c609719bSwdenk Hitachi SP14Q002 1483c609719bSwdenk 1484c609719bSwdenk 320x240. Black & white. 1485c609719bSwdenk 1486c609719bSwdenk Normally display is black on white background; define 14876d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_WHITE_ON_BLACK to get it inverted. 1488c609719bSwdenk 148945d7f525STom Wai-Hong Tam CONFIG_LCD_BMP_RLE8 149045d7f525STom Wai-Hong Tam 149145d7f525STom Wai-Hong Tam Support drawing of RLE8-compressed bitmaps on the LCD. 149245d7f525STom Wai-Hong Tam 1493735987c5STom Wai-Hong Tam CONFIG_I2C_EDID 1494735987c5STom Wai-Hong Tam 1495735987c5STom Wai-Hong Tam Enables an 'i2c edid' command which can read EDID 1496735987c5STom Wai-Hong Tam information over I2C from an attached LCD display. 1497735987c5STom Wai-Hong Tam 149845d7f525STom Wai-Hong Tam 14997152b1d0Swdenk- Splash Screen Support: CONFIG_SPLASH_SCREEN 1500d791b1dcSwdenk 1501d791b1dcSwdenk If this option is set, the environment is checked for 1502d791b1dcSwdenk a variable "splashimage". If found, the usual display 1503d791b1dcSwdenk of logo, copyright and system information on the LCD 1504e94d2cd9Swdenk is suppressed and the BMP image at the address 1505d791b1dcSwdenk specified in "splashimage" is loaded instead. The 1506d791b1dcSwdenk console is redirected to the "nulldev", too. This 1507d791b1dcSwdenk allows for a "silent" boot where a splash screen is 1508d791b1dcSwdenk loaded very quickly after power-on. 1509d791b1dcSwdenk 15101ca298ceSMatthias Weisser CONFIG_SPLASH_SCREEN_ALIGN 15111ca298ceSMatthias Weisser 15121ca298ceSMatthias Weisser If this option is set the splash image can be freely positioned 15131ca298ceSMatthias Weisser on the screen. Environment variable "splashpos" specifies the 15141ca298ceSMatthias Weisser position as "x,y". If a positive number is given it is used as 15151ca298ceSMatthias Weisser number of pixel from left/top. If a negative number is given it 15161ca298ceSMatthias Weisser is used as number of pixel from right/bottom. You can also 15171ca298ceSMatthias Weisser specify 'm' for centering the image. 15181ca298ceSMatthias Weisser 15191ca298ceSMatthias Weisser Example: 15201ca298ceSMatthias Weisser setenv splashpos m,m 15211ca298ceSMatthias Weisser => image at center of screen 15221ca298ceSMatthias Weisser 15231ca298ceSMatthias Weisser setenv splashpos 30,20 15241ca298ceSMatthias Weisser => image at x = 30 and y = 20 15251ca298ceSMatthias Weisser 15261ca298ceSMatthias Weisser setenv splashpos -10,m 15271ca298ceSMatthias Weisser => vertically centered image 15281ca298ceSMatthias Weisser at x = dspWidth - bmpWidth - 9 15291ca298ceSMatthias Weisser 153098f4a3dfSStefan Roese- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP 153198f4a3dfSStefan Roese 153298f4a3dfSStefan Roese If this option is set, additionally to standard BMP 153398f4a3dfSStefan Roese images, gzipped BMP images can be displayed via the 153498f4a3dfSStefan Roese splashscreen support or the bmp command. 153598f4a3dfSStefan Roese 1536d5011762SAnatolij Gustschin- Run length encoded BMP image (RLE8) support: CONFIG_VIDEO_BMP_RLE8 1537d5011762SAnatolij Gustschin 1538d5011762SAnatolij Gustschin If this option is set, 8-bit RLE compressed BMP images 1539d5011762SAnatolij Gustschin can be displayed via the splashscreen support or the 1540d5011762SAnatolij Gustschin bmp command. 1541d5011762SAnatolij Gustschin 1542f2b96dfbSLei Wen- Do compresssing for memory range: 1543f2b96dfbSLei Wen CONFIG_CMD_ZIP 1544f2b96dfbSLei Wen 1545f2b96dfbSLei Wen If this option is set, it would use zlib deflate method 1546f2b96dfbSLei Wen to compress the specified memory at its best effort. 1547f2b96dfbSLei Wen 1548c29fdfc1Swdenk- Compression support: 1549c29fdfc1Swdenk CONFIG_BZIP2 1550c29fdfc1Swdenk 1551c29fdfc1Swdenk If this option is set, support for bzip2 compressed 1552c29fdfc1Swdenk images is included. If not, only uncompressed and gzip 1553c29fdfc1Swdenk compressed images are supported. 1554c29fdfc1Swdenk 1555c29fdfc1Swdenk NOTE: the bzip2 algorithm requires a lot of RAM, so 15566d0f6bcfSJean-Christophe PLAGNIOL-VILLARD the malloc area (as defined by CONFIG_SYS_MALLOC_LEN) should 1557c29fdfc1Swdenk be at least 4MB. 1558d791b1dcSwdenk 1559fc9c1727SLuigi 'Comio' Mantellini CONFIG_LZMA 1560fc9c1727SLuigi 'Comio' Mantellini 1561fc9c1727SLuigi 'Comio' Mantellini If this option is set, support for lzma compressed 1562fc9c1727SLuigi 'Comio' Mantellini images is included. 1563fc9c1727SLuigi 'Comio' Mantellini 1564fc9c1727SLuigi 'Comio' Mantellini Note: The LZMA algorithm adds between 2 and 4KB of code and it 1565fc9c1727SLuigi 'Comio' Mantellini requires an amount of dynamic memory that is given by the 1566fc9c1727SLuigi 'Comio' Mantellini formula: 1567fc9c1727SLuigi 'Comio' Mantellini 1568fc9c1727SLuigi 'Comio' Mantellini (1846 + 768 << (lc + lp)) * sizeof(uint16) 1569fc9c1727SLuigi 'Comio' Mantellini 1570fc9c1727SLuigi 'Comio' Mantellini Where lc and lp stand for, respectively, Literal context bits 1571fc9c1727SLuigi 'Comio' Mantellini and Literal pos bits. 1572fc9c1727SLuigi 'Comio' Mantellini 1573fc9c1727SLuigi 'Comio' Mantellini This value is upper-bounded by 14MB in the worst case. Anyway, 1574fc9c1727SLuigi 'Comio' Mantellini for a ~4MB large kernel image, we have lc=3 and lp=0 for a 1575fc9c1727SLuigi 'Comio' Mantellini total amount of (1846 + 768 << (3 + 0)) * 2 = ~41KB... that is 1576fc9c1727SLuigi 'Comio' Mantellini a very small buffer. 1577fc9c1727SLuigi 'Comio' Mantellini 1578fc9c1727SLuigi 'Comio' Mantellini Use the lzmainfo tool to determinate the lc and lp values and 1579fc9c1727SLuigi 'Comio' Mantellini then calculate the amount of needed dynamic memory (ensuring 15806d0f6bcfSJean-Christophe PLAGNIOL-VILLARD the appropriate CONFIG_SYS_MALLOC_LEN value). 1581fc9c1727SLuigi 'Comio' Mantellini 158217ea1177Swdenk- MII/PHY support: 158317ea1177Swdenk CONFIG_PHY_ADDR 158417ea1177Swdenk 158517ea1177Swdenk The address of PHY on MII bus. 158617ea1177Swdenk 158717ea1177Swdenk CONFIG_PHY_CLOCK_FREQ (ppc4xx) 158817ea1177Swdenk 158917ea1177Swdenk The clock frequency of the MII bus 159017ea1177Swdenk 159117ea1177Swdenk CONFIG_PHY_GIGE 159217ea1177Swdenk 159317ea1177Swdenk If this option is set, support for speed/duplex 159411ccc33fSMarcel Ziswiler detection of gigabit PHY is included. 159517ea1177Swdenk 159617ea1177Swdenk CONFIG_PHY_RESET_DELAY 159717ea1177Swdenk 159817ea1177Swdenk Some PHY like Intel LXT971A need extra delay after 159917ea1177Swdenk reset before any MII register access is possible. 160017ea1177Swdenk For such PHY, set this option to the usec delay 160117ea1177Swdenk required. (minimum 300usec for LXT971A) 160217ea1177Swdenk 160317ea1177Swdenk CONFIG_PHY_CMD_DELAY (ppc4xx) 160417ea1177Swdenk 160517ea1177Swdenk Some PHY like Intel LXT971A need extra delay after 160617ea1177Swdenk command issued before MII status register can be read 160717ea1177Swdenk 1608c609719bSwdenk- Ethernet address: 1609c609719bSwdenk CONFIG_ETHADDR 1610c68a05feSrichardretanubun CONFIG_ETH1ADDR 1611c609719bSwdenk CONFIG_ETH2ADDR 1612c609719bSwdenk CONFIG_ETH3ADDR 1613c68a05feSrichardretanubun CONFIG_ETH4ADDR 1614c68a05feSrichardretanubun CONFIG_ETH5ADDR 1615c609719bSwdenk 161611ccc33fSMarcel Ziswiler Define a default value for Ethernet address to use 161711ccc33fSMarcel Ziswiler for the respective Ethernet interface, in case this 1618c609719bSwdenk is not determined automatically. 1619c609719bSwdenk 1620c609719bSwdenk- IP address: 1621c609719bSwdenk CONFIG_IPADDR 1622c609719bSwdenk 1623c609719bSwdenk Define a default value for the IP address to use for 162411ccc33fSMarcel Ziswiler the default Ethernet interface, in case this is not 1625c609719bSwdenk determined through e.g. bootp. 16261ebcd654SWolfgang Denk (Environment variable "ipaddr") 1627c609719bSwdenk 1628c609719bSwdenk- Server IP address: 1629c609719bSwdenk CONFIG_SERVERIP 1630c609719bSwdenk 1631c609719bSwdenk Defines a default value for the IP address of a TFTP 1632c609719bSwdenk server to contact when using the "tftboot" command. 16331ebcd654SWolfgang Denk (Environment variable "serverip") 1634c609719bSwdenk 163597cfe861SRobin Getz CONFIG_KEEP_SERVERADDR 163697cfe861SRobin Getz 163797cfe861SRobin Getz Keeps the server's MAC address, in the env 'serveraddr' 163897cfe861SRobin Getz for passing to bootargs (like Linux's netconsole option) 163997cfe861SRobin Getz 16401ebcd654SWolfgang Denk- Gateway IP address: 16411ebcd654SWolfgang Denk CONFIG_GATEWAYIP 16421ebcd654SWolfgang Denk 16431ebcd654SWolfgang Denk Defines a default value for the IP address of the 16441ebcd654SWolfgang Denk default router where packets to other networks are 16451ebcd654SWolfgang Denk sent to. 16461ebcd654SWolfgang Denk (Environment variable "gatewayip") 16471ebcd654SWolfgang Denk 16481ebcd654SWolfgang Denk- Subnet mask: 16491ebcd654SWolfgang Denk CONFIG_NETMASK 16501ebcd654SWolfgang Denk 16511ebcd654SWolfgang Denk Defines a default value for the subnet mask (or 16521ebcd654SWolfgang Denk routing prefix) which is used to determine if an IP 16531ebcd654SWolfgang Denk address belongs to the local subnet or needs to be 16541ebcd654SWolfgang Denk forwarded through a router. 16551ebcd654SWolfgang Denk (Environment variable "netmask") 16561ebcd654SWolfgang Denk 165753a5c424SDavid Updegraff- Multicast TFTP Mode: 165853a5c424SDavid Updegraff CONFIG_MCAST_TFTP 165953a5c424SDavid Updegraff 166053a5c424SDavid Updegraff Defines whether you want to support multicast TFTP as per 166153a5c424SDavid Updegraff rfc-2090; for example to work with atftp. Lets lots of targets 166211ccc33fSMarcel Ziswiler tftp down the same boot image concurrently. Note: the Ethernet 166353a5c424SDavid Updegraff driver in use must provide a function: mcast() to join/leave a 166453a5c424SDavid Updegraff multicast group. 166553a5c424SDavid Updegraff 1666c609719bSwdenk- BOOTP Recovery Mode: 1667c609719bSwdenk CONFIG_BOOTP_RANDOM_DELAY 1668c609719bSwdenk 1669c609719bSwdenk If you have many targets in a network that try to 1670c609719bSwdenk boot using BOOTP, you may want to avoid that all 1671c609719bSwdenk systems send out BOOTP requests at precisely the same 1672c609719bSwdenk moment (which would happen for instance at recovery 1673c609719bSwdenk from a power failure, when all systems will try to 1674c609719bSwdenk boot, thus flooding the BOOTP server. Defining 1675c609719bSwdenk CONFIG_BOOTP_RANDOM_DELAY causes a random delay to be 1676c609719bSwdenk inserted before sending out BOOTP requests. The 16776c33c785SWolfgang Denk following delays are inserted then: 1678c609719bSwdenk 1679c609719bSwdenk 1st BOOTP request: delay 0 ... 1 sec 1680c609719bSwdenk 2nd BOOTP request: delay 0 ... 2 sec 1681c609719bSwdenk 3rd BOOTP request: delay 0 ... 4 sec 1682c609719bSwdenk 4th and following 1683c609719bSwdenk BOOTP requests: delay 0 ... 8 sec 1684c609719bSwdenk 1685fe389a82Sstroese- DHCP Advanced Options: 16861fe80d79SJon Loeliger You can fine tune the DHCP functionality by defining 16871fe80d79SJon Loeliger CONFIG_BOOTP_* symbols: 1688fe389a82Sstroese 16891fe80d79SJon Loeliger CONFIG_BOOTP_SUBNETMASK 16901fe80d79SJon Loeliger CONFIG_BOOTP_GATEWAY 16911fe80d79SJon Loeliger CONFIG_BOOTP_HOSTNAME 16921fe80d79SJon Loeliger CONFIG_BOOTP_NISDOMAIN 16931fe80d79SJon Loeliger CONFIG_BOOTP_BOOTPATH 16941fe80d79SJon Loeliger CONFIG_BOOTP_BOOTFILESIZE 16951fe80d79SJon Loeliger CONFIG_BOOTP_DNS 16961fe80d79SJon Loeliger CONFIG_BOOTP_DNS2 16971fe80d79SJon Loeliger CONFIG_BOOTP_SEND_HOSTNAME 16981fe80d79SJon Loeliger CONFIG_BOOTP_NTPSERVER 16991fe80d79SJon Loeliger CONFIG_BOOTP_TIMEOFFSET 17001fe80d79SJon Loeliger CONFIG_BOOTP_VENDOREX 17012c00e099SJoe Hershberger CONFIG_BOOTP_MAY_FAIL 1702fe389a82Sstroese 17035d110f0aSWilson Callan CONFIG_BOOTP_SERVERIP - TFTP server will be the serverip 17045d110f0aSWilson Callan environment variable, not the BOOTP server. 1705fe389a82Sstroese 17062c00e099SJoe Hershberger CONFIG_BOOTP_MAY_FAIL - If the DHCP server is not found 17072c00e099SJoe Hershberger after the configured retry count, the call will fail 17082c00e099SJoe Hershberger instead of starting over. This can be used to fail over 17092c00e099SJoe Hershberger to Link-local IP address configuration if the DHCP server 17102c00e099SJoe Hershberger is not available. 17112c00e099SJoe Hershberger 1712fe389a82Sstroese CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS 1713fe389a82Sstroese serverip from a DHCP server, it is possible that more 1714fe389a82Sstroese than one DNS serverip is offered to the client. 1715fe389a82Sstroese If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS 1716fe389a82Sstroese serverip will be stored in the additional environment 1717fe389a82Sstroese variable "dnsip2". The first DNS serverip is always 1718fe389a82Sstroese stored in the variable "dnsip", when CONFIG_BOOTP_DNS 17191fe80d79SJon Loeliger is defined. 1720fe389a82Sstroese 1721fe389a82Sstroese CONFIG_BOOTP_SEND_HOSTNAME - Some DHCP servers are capable 1722fe389a82Sstroese to do a dynamic update of a DNS server. To do this, they 1723fe389a82Sstroese need the hostname of the DHCP requester. 17245d110f0aSWilson Callan If CONFIG_BOOTP_SEND_HOSTNAME is defined, the content 17251fe80d79SJon Loeliger of the "hostname" environment variable is passed as 17261fe80d79SJon Loeliger option 12 to the DHCP server. 1727fe389a82Sstroese 1728d9a2f416SAras Vaichas CONFIG_BOOTP_DHCP_REQUEST_DELAY 1729d9a2f416SAras Vaichas 1730d9a2f416SAras Vaichas A 32bit value in microseconds for a delay between 1731d9a2f416SAras Vaichas receiving a "DHCP Offer" and sending the "DHCP Request". 1732d9a2f416SAras Vaichas This fixes a problem with certain DHCP servers that don't 1733d9a2f416SAras Vaichas respond 100% of the time to a "DHCP request". E.g. On an 1734d9a2f416SAras Vaichas AT91RM9200 processor running at 180MHz, this delay needed 1735d9a2f416SAras Vaichas to be *at least* 15,000 usec before a Windows Server 2003 1736d9a2f416SAras Vaichas DHCP server would reply 100% of the time. I recommend at 1737d9a2f416SAras Vaichas least 50,000 usec to be safe. The alternative is to hope 1738d9a2f416SAras Vaichas that one of the retries will be successful but note that 1739d9a2f416SAras Vaichas the DHCP timeout and retry process takes a longer than 1740d9a2f416SAras Vaichas this delay. 1741d9a2f416SAras Vaichas 1742d22c338eSJoe Hershberger - Link-local IP address negotiation: 1743d22c338eSJoe Hershberger Negotiate with other link-local clients on the local network 1744d22c338eSJoe Hershberger for an address that doesn't require explicit configuration. 1745d22c338eSJoe Hershberger This is especially useful if a DHCP server cannot be guaranteed 1746d22c338eSJoe Hershberger to exist in all environments that the device must operate. 1747d22c338eSJoe Hershberger 1748d22c338eSJoe Hershberger See doc/README.link-local for more information. 1749d22c338eSJoe Hershberger 1750a3d991bdSwdenk - CDP Options: 1751a3d991bdSwdenk CONFIG_CDP_DEVICE_ID 1752a3d991bdSwdenk 1753a3d991bdSwdenk The device id used in CDP trigger frames. 1754a3d991bdSwdenk 1755a3d991bdSwdenk CONFIG_CDP_DEVICE_ID_PREFIX 1756a3d991bdSwdenk 1757a3d991bdSwdenk A two character string which is prefixed to the MAC address 1758a3d991bdSwdenk of the device. 1759a3d991bdSwdenk 1760a3d991bdSwdenk CONFIG_CDP_PORT_ID 1761a3d991bdSwdenk 1762a3d991bdSwdenk A printf format string which contains the ascii name of 1763a3d991bdSwdenk the port. Normally is set to "eth%d" which sets 176411ccc33fSMarcel Ziswiler eth0 for the first Ethernet, eth1 for the second etc. 1765a3d991bdSwdenk 1766a3d991bdSwdenk CONFIG_CDP_CAPABILITIES 1767a3d991bdSwdenk 1768a3d991bdSwdenk A 32bit integer which indicates the device capabilities; 1769a3d991bdSwdenk 0x00000010 for a normal host which does not forwards. 1770a3d991bdSwdenk 1771a3d991bdSwdenk CONFIG_CDP_VERSION 1772a3d991bdSwdenk 1773a3d991bdSwdenk An ascii string containing the version of the software. 1774a3d991bdSwdenk 1775a3d991bdSwdenk CONFIG_CDP_PLATFORM 1776a3d991bdSwdenk 1777a3d991bdSwdenk An ascii string containing the name of the platform. 1778a3d991bdSwdenk 1779a3d991bdSwdenk CONFIG_CDP_TRIGGER 1780a3d991bdSwdenk 1781a3d991bdSwdenk A 32bit integer sent on the trigger. 1782a3d991bdSwdenk 1783a3d991bdSwdenk CONFIG_CDP_POWER_CONSUMPTION 1784a3d991bdSwdenk 1785a3d991bdSwdenk A 16bit integer containing the power consumption of the 1786a3d991bdSwdenk device in .1 of milliwatts. 1787a3d991bdSwdenk 1788a3d991bdSwdenk CONFIG_CDP_APPLIANCE_VLAN_TYPE 1789a3d991bdSwdenk 1790a3d991bdSwdenk A byte containing the id of the VLAN. 1791a3d991bdSwdenk 1792c609719bSwdenk- Status LED: CONFIG_STATUS_LED 1793c609719bSwdenk 1794c609719bSwdenk Several configurations allow to display the current 1795c609719bSwdenk status using a LED. For instance, the LED will blink 1796c609719bSwdenk fast while running U-Boot code, stop blinking as 1797c609719bSwdenk soon as a reply to a BOOTP request was received, and 1798c609719bSwdenk start blinking slow once the Linux kernel is running 1799c609719bSwdenk (supported by a status LED driver in the Linux 1800c609719bSwdenk kernel). Defining CONFIG_STATUS_LED enables this 1801c609719bSwdenk feature in U-Boot. 1802c609719bSwdenk 1803c609719bSwdenk- CAN Support: CONFIG_CAN_DRIVER 1804c609719bSwdenk 1805c609719bSwdenk Defining CONFIG_CAN_DRIVER enables CAN driver support 1806c609719bSwdenk on those systems that support this (optional) 1807c609719bSwdenk feature, like the TQM8xxL modules. 1808c609719bSwdenk 1809c609719bSwdenk- I2C Support: CONFIG_HARD_I2C | CONFIG_SOFT_I2C 1810c609719bSwdenk 1811b37c7e5eSwdenk These enable I2C serial bus commands. Defining either of 1812b37c7e5eSwdenk (but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will 181311ccc33fSMarcel Ziswiler include the appropriate I2C driver for the selected CPU. 1814c609719bSwdenk 1815b37c7e5eSwdenk This will allow you to use i2c commands at the u-boot 1816602ad3b3SJon Loeliger command line (as long as you set CONFIG_CMD_I2C in 1817b37c7e5eSwdenk CONFIG_COMMANDS) and communicate with i2c based realtime 1818b37c7e5eSwdenk clock chips. See common/cmd_i2c.c for a description of the 1819c609719bSwdenk command line interface. 1820c609719bSwdenk 1821bb99ad6dSBen Warren CONFIG_HARD_I2C selects a hardware I2C controller. 1822c609719bSwdenk 1823b37c7e5eSwdenk CONFIG_SOFT_I2C configures u-boot to use a software (aka 1824b37c7e5eSwdenk bit-banging) driver instead of CPM or similar hardware 1825b37c7e5eSwdenk support for I2C. 1826c609719bSwdenk 1827b37c7e5eSwdenk There are several other quantities that must also be 1828b37c7e5eSwdenk defined when you define CONFIG_HARD_I2C or CONFIG_SOFT_I2C. 1829c609719bSwdenk 18306d0f6bcfSJean-Christophe PLAGNIOL-VILLARD In both cases you will need to define CONFIG_SYS_I2C_SPEED 1831b37c7e5eSwdenk to be the frequency (in Hz) at which you wish your i2c bus 18326d0f6bcfSJean-Christophe PLAGNIOL-VILLARD to run and CONFIG_SYS_I2C_SLAVE to be the address of this node (ie 183311ccc33fSMarcel Ziswiler the CPU's i2c node address). 1834c609719bSwdenk 18358d321b81SPeter Tyser Now, the u-boot i2c code for the mpc8xx 1836a47a12beSStefan Roese (arch/powerpc/cpu/mpc8xx/i2c.c) sets the CPU up as a master node 18378d321b81SPeter Tyser and so its address should therefore be cleared to 0 (See, 18388d321b81SPeter Tyser eg, MPC823e User's Manual p.16-473). So, set 18398d321b81SPeter Tyser CONFIG_SYS_I2C_SLAVE to 0. 1840b37c7e5eSwdenk 18415da71efaSEric Millbrandt CONFIG_SYS_I2C_INIT_MPC5XXX 18425da71efaSEric Millbrandt 18435da71efaSEric Millbrandt When a board is reset during an i2c bus transfer 18445da71efaSEric Millbrandt chips might think that the current transfer is still 18455da71efaSEric Millbrandt in progress. Reset the slave devices by sending start 18465da71efaSEric Millbrandt commands until the slave device responds. 18475da71efaSEric Millbrandt 1848b37c7e5eSwdenk That's all that's required for CONFIG_HARD_I2C. 1849b37c7e5eSwdenk 1850b37c7e5eSwdenk If you use the software i2c interface (CONFIG_SOFT_I2C) 1851b37c7e5eSwdenk then the following macros need to be defined (examples are 1852b37c7e5eSwdenk from include/configs/lwmon.h): 1853c609719bSwdenk 1854c609719bSwdenk I2C_INIT 1855c609719bSwdenk 1856b37c7e5eSwdenk (Optional). Any commands necessary to enable the I2C 1857c609719bSwdenk controller or configure ports. 1858c609719bSwdenk 1859b37c7e5eSwdenk eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) 1860b37c7e5eSwdenk 1861c609719bSwdenk I2C_PORT 1862c609719bSwdenk 1863c609719bSwdenk (Only for MPC8260 CPU). The I/O port to use (the code 1864c609719bSwdenk assumes both bits are on the same port). Valid values 1865c609719bSwdenk are 0..3 for ports A..D. 1866c609719bSwdenk 1867c609719bSwdenk I2C_ACTIVE 1868c609719bSwdenk 1869c609719bSwdenk The code necessary to make the I2C data line active 1870c609719bSwdenk (driven). If the data line is open collector, this 1871c609719bSwdenk define can be null. 1872c609719bSwdenk 1873b37c7e5eSwdenk eg: #define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) 1874b37c7e5eSwdenk 1875c609719bSwdenk I2C_TRISTATE 1876c609719bSwdenk 1877c609719bSwdenk The code necessary to make the I2C data line tri-stated 1878c609719bSwdenk (inactive). If the data line is open collector, this 1879c609719bSwdenk define can be null. 1880c609719bSwdenk 1881b37c7e5eSwdenk eg: #define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) 1882b37c7e5eSwdenk 1883c609719bSwdenk I2C_READ 1884c609719bSwdenk 1885c609719bSwdenk Code that returns TRUE if the I2C data line is high, 1886c609719bSwdenk FALSE if it is low. 1887c609719bSwdenk 1888b37c7e5eSwdenk eg: #define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) 1889b37c7e5eSwdenk 1890c609719bSwdenk I2C_SDA(bit) 1891c609719bSwdenk 1892c609719bSwdenk If <bit> is TRUE, sets the I2C data line high. If it 1893c609719bSwdenk is FALSE, it clears it (low). 1894c609719bSwdenk 1895b37c7e5eSwdenk eg: #define I2C_SDA(bit) \ 1896b37c7e5eSwdenk if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ 1897b37c7e5eSwdenk else immr->im_cpm.cp_pbdat &= ~PB_SDA 1898b37c7e5eSwdenk 1899c609719bSwdenk I2C_SCL(bit) 1900c609719bSwdenk 1901c609719bSwdenk If <bit> is TRUE, sets the I2C clock line high. If it 1902c609719bSwdenk is FALSE, it clears it (low). 1903c609719bSwdenk 1904b37c7e5eSwdenk eg: #define I2C_SCL(bit) \ 1905b37c7e5eSwdenk if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ 1906b37c7e5eSwdenk else immr->im_cpm.cp_pbdat &= ~PB_SCL 1907b37c7e5eSwdenk 1908c609719bSwdenk I2C_DELAY 1909c609719bSwdenk 1910c609719bSwdenk This delay is invoked four times per clock cycle so this 1911c609719bSwdenk controls the rate of data transfer. The data rate thus 1912b37c7e5eSwdenk is 1 / (I2C_DELAY * 4). Often defined to be something 1913b37c7e5eSwdenk like: 1914b37c7e5eSwdenk 1915b37c7e5eSwdenk #define I2C_DELAY udelay(2) 1916c609719bSwdenk 1917793b5726SMike Frysinger CONFIG_SOFT_I2C_GPIO_SCL / CONFIG_SOFT_I2C_GPIO_SDA 1918793b5726SMike Frysinger 1919793b5726SMike Frysinger If your arch supports the generic GPIO framework (asm/gpio.h), 1920793b5726SMike Frysinger then you may alternatively define the two GPIOs that are to be 1921793b5726SMike Frysinger used as SCL / SDA. Any of the previous I2C_xxx macros will 1922793b5726SMike Frysinger have GPIO-based defaults assigned to them as appropriate. 1923793b5726SMike Frysinger 1924793b5726SMike Frysinger You should define these to the GPIO value as given directly to 1925793b5726SMike Frysinger the generic GPIO functions. 1926793b5726SMike Frysinger 19276d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_I2C_INIT_BOARD 192847cd00faSwdenk 192947cd00faSwdenk When a board is reset during an i2c bus transfer 193047cd00faSwdenk chips might think that the current transfer is still 193147cd00faSwdenk in progress. On some boards it is possible to access 193247cd00faSwdenk the i2c SCLK line directly, either by using the 193347cd00faSwdenk processor pin as a GPIO or by having a second pin 193447cd00faSwdenk connected to the bus. If this option is defined a 193547cd00faSwdenk custom i2c_init_board() routine in boards/xxx/board.c 193647cd00faSwdenk is run early in the boot sequence. 193747cd00faSwdenk 193826a33504SRichard Retanubun CONFIG_SYS_I2C_BOARD_LATE_INIT 193926a33504SRichard Retanubun 194026a33504SRichard Retanubun An alternative to CONFIG_SYS_I2C_INIT_BOARD. If this option is 194126a33504SRichard Retanubun defined a custom i2c_board_late_init() routine in 194226a33504SRichard Retanubun boards/xxx/board.c is run AFTER the operations in i2c_init() 194326a33504SRichard Retanubun is completed. This callpoint can be used to unreset i2c bus 194426a33504SRichard Retanubun using CPU i2c controller register accesses for CPUs whose i2c 194526a33504SRichard Retanubun controller provide such a method. It is called at the end of 194626a33504SRichard Retanubun i2c_init() to allow i2c_init operations to setup the i2c bus 194726a33504SRichard Retanubun controller on the CPU (e.g. setting bus speed & slave address). 194826a33504SRichard Retanubun 194917ea1177Swdenk CONFIG_I2CFAST (PPC405GP|PPC405EP only) 195017ea1177Swdenk 195117ea1177Swdenk This option enables configuration of bi_iic_fast[] flags 195217ea1177Swdenk in u-boot bd_info structure based on u-boot environment 195317ea1177Swdenk variable "i2cfast". (see also i2cfast) 195417ea1177Swdenk 1955bb99ad6dSBen Warren CONFIG_I2C_MULTI_BUS 1956bb99ad6dSBen Warren 1957bb99ad6dSBen Warren This option allows the use of multiple I2C buses, each of which 1958bb99ad6dSBen Warren must have a controller. At any point in time, only one bus is 1959bb99ad6dSBen Warren active. To switch to a different bus, use the 'i2c dev' command. 1960bb99ad6dSBen Warren Note that bus numbering is zero-based. 1961bb99ad6dSBen Warren 19626d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_I2C_NOPROBES 1963bb99ad6dSBen Warren 1964bb99ad6dSBen Warren This option specifies a list of I2C devices that will be skipped 19650f89c54bSPeter Tyser when the 'i2c probe' command is issued. If CONFIG_I2C_MULTI_BUS 19660f89c54bSPeter Tyser is set, specify a list of bus-device pairs. Otherwise, specify 19670f89c54bSPeter Tyser a 1D array of device addresses 1968bb99ad6dSBen Warren 1969bb99ad6dSBen Warren e.g. 1970bb99ad6dSBen Warren #undef CONFIG_I2C_MULTI_BUS 19716d0f6bcfSJean-Christophe PLAGNIOL-VILLARD #define CONFIG_SYS_I2C_NOPROBES {0x50,0x68} 1972bb99ad6dSBen Warren 1973bb99ad6dSBen Warren will skip addresses 0x50 and 0x68 on a board with one I2C bus 1974bb99ad6dSBen Warren 1975bb99ad6dSBen Warren #define CONFIG_I2C_MULTI_BUS 19766d0f6bcfSJean-Christophe PLAGNIOL-VILLARD #define CONFIG_SYS_I2C_MULTI_NOPROBES {{0,0x50},{0,0x68},{1,0x54}} 1977bb99ad6dSBen Warren 1978bb99ad6dSBen Warren will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1 1979bb99ad6dSBen Warren 19806d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SPD_BUS_NUM 1981be5e6181STimur Tabi 1982be5e6181STimur Tabi If defined, then this indicates the I2C bus number for DDR SPD. 1983be5e6181STimur Tabi If not defined, then U-Boot assumes that SPD is on I2C bus 0. 1984be5e6181STimur Tabi 19856d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_RTC_BUS_NUM 19860dc018ecSStefan Roese 19870dc018ecSStefan Roese If defined, then this indicates the I2C bus number for the RTC. 19880dc018ecSStefan Roese If not defined, then U-Boot assumes that RTC is on I2C bus 0. 19890dc018ecSStefan Roese 19906d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_DTT_BUS_NUM 19910dc018ecSStefan Roese 19920dc018ecSStefan Roese If defined, then this indicates the I2C bus number for the DTT. 19930dc018ecSStefan Roese If not defined, then U-Boot assumes that DTT is on I2C bus 0. 19940dc018ecSStefan Roese 19956d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_I2C_DTT_ADDR: 19969ebbb54fSVictor Gallardo 19979ebbb54fSVictor Gallardo If defined, specifies the I2C address of the DTT device. 19989ebbb54fSVictor Gallardo If not defined, then U-Boot uses predefined value for 19999ebbb54fSVictor Gallardo specified DTT device. 20009ebbb54fSVictor Gallardo 2001be5e6181STimur Tabi CONFIG_FSL_I2C 2002be5e6181STimur Tabi 2003be5e6181STimur Tabi Define this option if you want to use Freescale's I2C driver in 20047817cb20SMarcel Ziswiler drivers/i2c/fsl_i2c.c. 2005be5e6181STimur Tabi 200667b23a32SHeiko Schocher CONFIG_I2C_MUX 200767b23a32SHeiko Schocher 200867b23a32SHeiko Schocher Define this option if you have I2C devices reached over 1 .. n 200967b23a32SHeiko Schocher I2C Muxes like the pca9544a. This option addes a new I2C 201067b23a32SHeiko Schocher Command "i2c bus [muxtype:muxaddr:muxchannel]" which adds a 201167b23a32SHeiko Schocher new I2C Bus to the existing I2C Busses. If you select the 201267b23a32SHeiko Schocher new Bus with "i2c dev", u-bbot sends first the commandos for 201367b23a32SHeiko Schocher the muxes to activate this new "bus". 201467b23a32SHeiko Schocher 201567b23a32SHeiko Schocher CONFIG_I2C_MULTI_BUS must be also defined, to use this 201667b23a32SHeiko Schocher feature! 201767b23a32SHeiko Schocher 201867b23a32SHeiko Schocher Example: 201967b23a32SHeiko Schocher Adding a new I2C Bus reached over 2 pca9544a muxes 202067b23a32SHeiko Schocher The First mux with address 70 and channel 6 202167b23a32SHeiko Schocher The Second mux with address 71 and channel 4 202267b23a32SHeiko Schocher 202367b23a32SHeiko Schocher => i2c bus pca9544a:70:6:pca9544a:71:4 202467b23a32SHeiko Schocher 202567b23a32SHeiko Schocher Use the "i2c bus" command without parameter, to get a list 202667b23a32SHeiko Schocher of I2C Busses with muxes: 202767b23a32SHeiko Schocher 202867b23a32SHeiko Schocher => i2c bus 202967b23a32SHeiko Schocher Busses reached over muxes: 203067b23a32SHeiko Schocher Bus ID: 2 203167b23a32SHeiko Schocher reached over Mux(es): 203267b23a32SHeiko Schocher pca9544a@70 ch: 4 203367b23a32SHeiko Schocher Bus ID: 3 203467b23a32SHeiko Schocher reached over Mux(es): 203567b23a32SHeiko Schocher pca9544a@70 ch: 6 203667b23a32SHeiko Schocher pca9544a@71 ch: 4 203767b23a32SHeiko Schocher => 203867b23a32SHeiko Schocher 203967b23a32SHeiko Schocher If you now switch to the new I2C Bus 3 with "i2c dev 3" 2040f9a78b8dSMichael Jones u-boot first sends the command to the mux@70 to enable 2041f9a78b8dSMichael Jones channel 6, and then the command to the mux@71 to enable 204267b23a32SHeiko Schocher the channel 4. 204367b23a32SHeiko Schocher 204467b23a32SHeiko Schocher After that, you can use the "normal" i2c commands as 2045f9a78b8dSMichael Jones usual to communicate with your I2C devices behind 204667b23a32SHeiko Schocher the 2 muxes. 204767b23a32SHeiko Schocher 204867b23a32SHeiko Schocher This option is actually implemented for the bitbanging 204967b23a32SHeiko Schocher algorithm in common/soft_i2c.c and for the Hardware I2C 205067b23a32SHeiko Schocher Bus on the MPC8260. But it should be not so difficult 205167b23a32SHeiko Schocher to add this option to other architectures. 205267b23a32SHeiko Schocher 20532ac6985aSAndrew Dyer CONFIG_SOFT_I2C_READ_REPEATED_START 20542ac6985aSAndrew Dyer 20552ac6985aSAndrew Dyer defining this will force the i2c_read() function in 20562ac6985aSAndrew Dyer the soft_i2c driver to perform an I2C repeated start 20572ac6985aSAndrew Dyer between writing the address pointer and reading the 20582ac6985aSAndrew Dyer data. If this define is omitted the default behaviour 20592ac6985aSAndrew Dyer of doing a stop-start sequence will be used. Most I2C 20602ac6985aSAndrew Dyer devices can use either method, but some require one or 20612ac6985aSAndrew Dyer the other. 2062be5e6181STimur Tabi 2063c609719bSwdenk- SPI Support: CONFIG_SPI 2064c609719bSwdenk 2065c609719bSwdenk Enables SPI driver (so far only tested with 2066c609719bSwdenk SPI EEPROM, also an instance works with Crystal A/D and 2067c609719bSwdenk D/As on the SACSng board) 2068c609719bSwdenk 20696639562eSYoshihiro Shimoda CONFIG_SH_SPI 20706639562eSYoshihiro Shimoda 20716639562eSYoshihiro Shimoda Enables the driver for SPI controller on SuperH. Currently 20726639562eSYoshihiro Shimoda only SH7757 is supported. 20736639562eSYoshihiro Shimoda 2074c609719bSwdenk CONFIG_SPI_X 2075c609719bSwdenk 2076c609719bSwdenk Enables extended (16-bit) SPI EEPROM addressing. 2077c609719bSwdenk (symmetrical to CONFIG_I2C_X) 2078c609719bSwdenk 2079c609719bSwdenk CONFIG_SOFT_SPI 2080c609719bSwdenk 2081c609719bSwdenk Enables a software (bit-bang) SPI driver rather than 2082c609719bSwdenk using hardware support. This is a general purpose 2083c609719bSwdenk driver that only requires three general I/O port pins 2084c609719bSwdenk (two outputs, one input) to function. If this is 2085c609719bSwdenk defined, the board configuration must define several 2086c609719bSwdenk SPI configuration items (port pins to use, etc). For 2087c609719bSwdenk an example, see include/configs/sacsng.h. 2088c609719bSwdenk 208904a9e118SBen Warren CONFIG_HARD_SPI 209004a9e118SBen Warren 209104a9e118SBen Warren Enables a hardware SPI driver for general-purpose reads 209204a9e118SBen Warren and writes. As with CONFIG_SOFT_SPI, the board configuration 209304a9e118SBen Warren must define a list of chip-select function pointers. 209404a9e118SBen Warren Currently supported on some MPC8xxx processors. For an 209504a9e118SBen Warren example, see include/configs/mpc8349emds.h. 209604a9e118SBen Warren 209738254f45SGuennadi Liakhovetski CONFIG_MXC_SPI 209838254f45SGuennadi Liakhovetski 209938254f45SGuennadi Liakhovetski Enables the driver for the SPI controllers on i.MX and MXC 21002e3cd1cdSFabio Estevam SoCs. Currently i.MX31/35/51 are supported. 210138254f45SGuennadi Liakhovetski 21020133502eSMatthias Fuchs- FPGA Support: CONFIG_FPGA 21030133502eSMatthias Fuchs 21040133502eSMatthias Fuchs Enables FPGA subsystem. 21050133502eSMatthias Fuchs 21060133502eSMatthias Fuchs CONFIG_FPGA_<vendor> 21070133502eSMatthias Fuchs 21080133502eSMatthias Fuchs Enables support for specific chip vendors. 21090133502eSMatthias Fuchs (ALTERA, XILINX) 21100133502eSMatthias Fuchs 21110133502eSMatthias Fuchs CONFIG_FPGA_<family> 21120133502eSMatthias Fuchs 21130133502eSMatthias Fuchs Enables support for FPGA family. 21140133502eSMatthias Fuchs (SPARTAN2, SPARTAN3, VIRTEX2, CYCLONE2, ACEX1K, ACEX) 21150133502eSMatthias Fuchs 21160133502eSMatthias Fuchs CONFIG_FPGA_COUNT 2117c609719bSwdenk 2118c609719bSwdenk Specify the number of FPGA devices to support. 2119c609719bSwdenk 21206d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_PROG_FEEDBACK 2121c609719bSwdenk 2122c609719bSwdenk Enable printing of hash marks during FPGA configuration. 2123c609719bSwdenk 21246d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_CHECK_BUSY 2125c609719bSwdenk 2126c609719bSwdenk Enable checks on FPGA configuration interface busy 2127c609719bSwdenk status by the configuration function. This option 2128c609719bSwdenk will require a board or device specific function to 2129c609719bSwdenk be written. 2130c609719bSwdenk 2131c609719bSwdenk CONFIG_FPGA_DELAY 2132c609719bSwdenk 2133c609719bSwdenk If defined, a function that provides delays in the FPGA 2134c609719bSwdenk configuration driver. 2135c609719bSwdenk 21366d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_CHECK_CTRLC 2137c609719bSwdenk Allow Control-C to interrupt FPGA configuration 2138c609719bSwdenk 21396d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_CHECK_ERROR 2140c609719bSwdenk 2141c609719bSwdenk Check for configuration errors during FPGA bitfile 2142c609719bSwdenk loading. For example, abort during Virtex II 2143c609719bSwdenk configuration if the INIT_B line goes low (which 2144c609719bSwdenk indicated a CRC error). 2145c609719bSwdenk 21466d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_WAIT_INIT 2147c609719bSwdenk 2148c609719bSwdenk Maximum time to wait for the INIT_B line to deassert 2149c609719bSwdenk after PROB_B has been deasserted during a Virtex II 2150c609719bSwdenk FPGA configuration sequence. The default time is 500 215111ccc33fSMarcel Ziswiler ms. 2152c609719bSwdenk 21536d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_WAIT_BUSY 2154c609719bSwdenk 2155c609719bSwdenk Maximum time to wait for BUSY to deassert during 215611ccc33fSMarcel Ziswiler Virtex II FPGA configuration. The default is 5 ms. 2157c609719bSwdenk 21586d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_WAIT_CONFIG 2159c609719bSwdenk 2160c609719bSwdenk Time to wait after FPGA configuration. The default is 216111ccc33fSMarcel Ziswiler 200 ms. 2162c609719bSwdenk 2163c609719bSwdenk- Configuration Management: 2164c609719bSwdenk CONFIG_IDENT_STRING 2165c609719bSwdenk 2166c609719bSwdenk If defined, this string will be added to the U-Boot 2167c609719bSwdenk version information (U_BOOT_VERSION) 2168c609719bSwdenk 2169c609719bSwdenk- Vendor Parameter Protection: 2170c609719bSwdenk 2171c609719bSwdenk U-Boot considers the values of the environment 2172c609719bSwdenk variables "serial#" (Board Serial Number) and 21737152b1d0Swdenk "ethaddr" (Ethernet Address) to be parameters that 2174c609719bSwdenk are set once by the board vendor / manufacturer, and 2175c609719bSwdenk protects these variables from casual modification by 2176c609719bSwdenk the user. Once set, these variables are read-only, 2177c609719bSwdenk and write or delete attempts are rejected. You can 217811ccc33fSMarcel Ziswiler change this behaviour: 2179c609719bSwdenk 2180c609719bSwdenk If CONFIG_ENV_OVERWRITE is #defined in your config 2181c609719bSwdenk file, the write protection for vendor parameters is 218247cd00faSwdenk completely disabled. Anybody can change or delete 2183c609719bSwdenk these parameters. 2184c609719bSwdenk 2185c609719bSwdenk Alternatively, if you #define _both_ CONFIG_ETHADDR 2186c609719bSwdenk _and_ CONFIG_OVERWRITE_ETHADDR_ONCE, a default 218711ccc33fSMarcel Ziswiler Ethernet address is installed in the environment, 2188c609719bSwdenk which can be changed exactly ONCE by the user. [The 2189c609719bSwdenk serial# is unaffected by this, i. e. it remains 2190c609719bSwdenk read-only.] 2191c609719bSwdenk 21922598090bSJoe Hershberger The same can be accomplished in a more flexible way 21932598090bSJoe Hershberger for any variable by configuring the type of access 21942598090bSJoe Hershberger to allow for those variables in the ".flags" variable 21952598090bSJoe Hershberger or define CONFIG_ENV_FLAGS_LIST_STATIC. 21962598090bSJoe Hershberger 2197c609719bSwdenk- Protected RAM: 2198c609719bSwdenk CONFIG_PRAM 2199c609719bSwdenk 2200c609719bSwdenk Define this variable to enable the reservation of 2201c609719bSwdenk "protected RAM", i. e. RAM which is not overwritten 2202c609719bSwdenk by U-Boot. Define CONFIG_PRAM to hold the number of 2203c609719bSwdenk kB you want to reserve for pRAM. You can overwrite 2204c609719bSwdenk this default value by defining an environment 2205c609719bSwdenk variable "pram" to the number of kB you want to 2206c609719bSwdenk reserve. Note that the board info structure will 2207c609719bSwdenk still show the full amount of RAM. If pRAM is 2208c609719bSwdenk reserved, a new environment variable "mem" will 2209c609719bSwdenk automatically be defined to hold the amount of 2210c609719bSwdenk remaining RAM in a form that can be passed as boot 2211c609719bSwdenk argument to Linux, for instance like that: 2212c609719bSwdenk 2213fe126d8bSWolfgang Denk setenv bootargs ... mem=\${mem} 2214c609719bSwdenk saveenv 2215c609719bSwdenk 2216c609719bSwdenk This way you can tell Linux not to use this memory, 2217c609719bSwdenk either, which results in a memory region that will 2218c609719bSwdenk not be affected by reboots. 2219c609719bSwdenk 2220c609719bSwdenk *WARNING* If your board configuration uses automatic 2221c609719bSwdenk detection of the RAM size, you must make sure that 2222c609719bSwdenk this memory test is non-destructive. So far, the 2223c609719bSwdenk following board configurations are known to be 2224c609719bSwdenk "pRAM-clean": 2225c609719bSwdenk 22261b0757ecSWolfgang Denk IVMS8, IVML24, SPD8xx, TQM8xxL, 22271b0757ecSWolfgang Denk HERMES, IP860, RPXlite, LWMON, 2228544d97e9SWolfgang Denk FLAGADM, TQM8260 2229c609719bSwdenk 223040fef049SGabe Black- Access to physical memory region (> 4GB) 223140fef049SGabe Black Some basic support is provided for operations on memory not 223240fef049SGabe Black normally accessible to U-Boot - e.g. some architectures 223340fef049SGabe Black support access to more than 4GB of memory on 32-bit 223440fef049SGabe Black machines using physical address extension or similar. 223540fef049SGabe Black Define CONFIG_PHYSMEM to access this basic support, which 223640fef049SGabe Black currently only supports clearing the memory. 223740fef049SGabe Black 2238c609719bSwdenk- Error Recovery: 2239c609719bSwdenk CONFIG_PANIC_HANG 2240c609719bSwdenk 2241c609719bSwdenk Define this variable to stop the system in case of a 2242c609719bSwdenk fatal error, so that you have to reset it manually. 2243c609719bSwdenk This is probably NOT a good idea for an embedded 224411ccc33fSMarcel Ziswiler system where you want the system to reboot 2245c609719bSwdenk automatically as fast as possible, but it may be 2246c609719bSwdenk useful during development since you can try to debug 2247c609719bSwdenk the conditions that lead to the situation. 2248c609719bSwdenk 2249c609719bSwdenk CONFIG_NET_RETRY_COUNT 2250c609719bSwdenk 2251c609719bSwdenk This variable defines the number of retries for 2252c609719bSwdenk network operations like ARP, RARP, TFTP, or BOOTP 2253c609719bSwdenk before giving up the operation. If not defined, a 2254c609719bSwdenk default value of 5 is used. 2255c609719bSwdenk 225640cb90eeSGuennadi Liakhovetski CONFIG_ARP_TIMEOUT 225740cb90eeSGuennadi Liakhovetski 225840cb90eeSGuennadi Liakhovetski Timeout waiting for an ARP reply in milliseconds. 225940cb90eeSGuennadi Liakhovetski 226048a3e999STetsuyuki Kobayashi CONFIG_NFS_TIMEOUT 226148a3e999STetsuyuki Kobayashi 226248a3e999STetsuyuki Kobayashi Timeout in milliseconds used in NFS protocol. 226348a3e999STetsuyuki Kobayashi If you encounter "ERROR: Cannot umount" in nfs command, 226448a3e999STetsuyuki Kobayashi try longer timeout such as 226548a3e999STetsuyuki Kobayashi #define CONFIG_NFS_TIMEOUT 10000UL 226648a3e999STetsuyuki Kobayashi 2267c609719bSwdenk- Command Interpreter: 22688078f1a5SWolfgang Denk CONFIG_AUTO_COMPLETE 226904a85b3bSwdenk 227004a85b3bSwdenk Enable auto completion of commands using TAB. 227104a85b3bSwdenk 22728078f1a5SWolfgang Denk Note that this feature has NOT been implemented yet 22738078f1a5SWolfgang Denk for the "hush" shell. 22748078f1a5SWolfgang Denk 22758078f1a5SWolfgang Denk 22766d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_HUSH_PARSER 2277c609719bSwdenk 2278c609719bSwdenk Define this variable to enable the "hush" shell (from 2279c609719bSwdenk Busybox) as command line interpreter, thus enabling 2280c609719bSwdenk powerful command line syntax like 2281c609719bSwdenk if...then...else...fi conditionals or `&&' and '||' 2282c609719bSwdenk constructs ("shell scripts"). 2283c609719bSwdenk 2284c609719bSwdenk If undefined, you get the old, much simpler behaviour 2285c609719bSwdenk with a somewhat smaller memory footprint. 2286c609719bSwdenk 2287c609719bSwdenk 22886d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PROMPT_HUSH_PS2 2289c609719bSwdenk 2290c609719bSwdenk This defines the secondary prompt string, which is 2291c609719bSwdenk printed when the command interpreter needs more input 2292c609719bSwdenk to complete a command. Usually "> ". 2293c609719bSwdenk 2294c609719bSwdenk Note: 2295c609719bSwdenk 2296c609719bSwdenk In the current implementation, the local variables 2297c609719bSwdenk space and global environment variables space are 2298c609719bSwdenk separated. Local variables are those you define by 22993b57fe0aSwdenk simply typing `name=value'. To access a local 2300c609719bSwdenk variable later on, you have write `$name' or 23013b57fe0aSwdenk `${name}'; to execute the contents of a variable 23023b57fe0aSwdenk directly type `$name' at the command prompt. 2303c609719bSwdenk 2304c609719bSwdenk Global environment variables are those you use 2305c609719bSwdenk setenv/printenv to work with. To run a command stored 2306c609719bSwdenk in such a variable, you need to use the run command, 2307c609719bSwdenk and you must not use the '$' sign to access them. 2308c609719bSwdenk 2309c609719bSwdenk To store commands and special characters in a 2310c609719bSwdenk variable, please use double quotation marks 2311c609719bSwdenk surrounding the whole text of the variable, instead 2312c609719bSwdenk of the backslashes before semicolons and special 2313c609719bSwdenk symbols. 2314c609719bSwdenk 2315aa0c71acSWolfgang Denk- Commandline Editing and History: 2316aa0c71acSWolfgang Denk CONFIG_CMDLINE_EDITING 2317aa0c71acSWolfgang Denk 231811ccc33fSMarcel Ziswiler Enable editing and History functions for interactive 2319aa0c71acSWolfgang Denk commandline input operations 2320aa0c71acSWolfgang Denk 2321a8c7c708Swdenk- Default Environment: 2322c609719bSwdenk CONFIG_EXTRA_ENV_SETTINGS 2323c609719bSwdenk 2324c609719bSwdenk Define this to contain any number of null terminated 2325c609719bSwdenk strings (variable = value pairs) that will be part of 23267152b1d0Swdenk the default environment compiled into the boot image. 23272262cfeeSwdenk 2328c609719bSwdenk For example, place something like this in your 2329c609719bSwdenk board's config file: 2330c609719bSwdenk 2331c609719bSwdenk #define CONFIG_EXTRA_ENV_SETTINGS \ 2332c609719bSwdenk "myvar1=value1\0" \ 2333c609719bSwdenk "myvar2=value2\0" 2334c609719bSwdenk 2335c609719bSwdenk Warning: This method is based on knowledge about the 2336c609719bSwdenk internal format how the environment is stored by the 23372262cfeeSwdenk U-Boot code. This is NOT an official, exported 2338c609719bSwdenk interface! Although it is unlikely that this format 23397152b1d0Swdenk will change soon, there is no guarantee either. 2340c609719bSwdenk You better know what you are doing here. 2341c609719bSwdenk 2342c609719bSwdenk Note: overly (ab)use of the default environment is 2343c609719bSwdenk discouraged. Make sure to check other ways to preset 234474de7aefSWolfgang Denk the environment like the "source" command or the 2345c609719bSwdenk boot command first. 2346c609719bSwdenk 23475e724ca2SStephen Warren CONFIG_ENV_VARS_UBOOT_CONFIG 23485e724ca2SStephen Warren 23495e724ca2SStephen Warren Define this in order to add variables describing the 23505e724ca2SStephen Warren U-Boot build configuration to the default environment. 23515e724ca2SStephen Warren These will be named arch, cpu, board, vendor, and soc. 23525e724ca2SStephen Warren 23535e724ca2SStephen Warren Enabling this option will cause the following to be defined: 23545e724ca2SStephen Warren 23555e724ca2SStephen Warren - CONFIG_SYS_ARCH 23565e724ca2SStephen Warren - CONFIG_SYS_CPU 23575e724ca2SStephen Warren - CONFIG_SYS_BOARD 23585e724ca2SStephen Warren - CONFIG_SYS_VENDOR 23595e724ca2SStephen Warren - CONFIG_SYS_SOC 23605e724ca2SStephen Warren 23617e27f89fSTom Rini CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 23627e27f89fSTom Rini 23637e27f89fSTom Rini Define this in order to add variables describing certain 23647e27f89fSTom Rini run-time determined information about the hardware to the 23657e27f89fSTom Rini environment. These will be named board_name, board_rev. 23667e27f89fSTom Rini 2367a8c7c708Swdenk- DataFlash Support: 23682abbe075Swdenk CONFIG_HAS_DATAFLASH 23692abbe075Swdenk 23702abbe075Swdenk Defining this option enables DataFlash features and 23712abbe075Swdenk allows to read/write in Dataflash via the standard 23722abbe075Swdenk commands cp, md... 23732abbe075Swdenk 2374f61ec45eSEric Nelson- Serial Flash support 2375f61ec45eSEric Nelson CONFIG_CMD_SF 2376f61ec45eSEric Nelson 2377f61ec45eSEric Nelson Defining this option enables SPI flash commands 2378f61ec45eSEric Nelson 'sf probe/read/write/erase/update'. 2379f61ec45eSEric Nelson 2380f61ec45eSEric Nelson Usage requires an initial 'probe' to define the serial 2381f61ec45eSEric Nelson flash parameters, followed by read/write/erase/update 2382f61ec45eSEric Nelson commands. 2383f61ec45eSEric Nelson 2384f61ec45eSEric Nelson The following defaults may be provided by the platform 2385f61ec45eSEric Nelson to handle the common case when only a single serial 2386f61ec45eSEric Nelson flash is present on the system. 2387f61ec45eSEric Nelson 2388f61ec45eSEric Nelson CONFIG_SF_DEFAULT_BUS Bus identifier 2389f61ec45eSEric Nelson CONFIG_SF_DEFAULT_CS Chip-select 2390f61ec45eSEric Nelson CONFIG_SF_DEFAULT_MODE (see include/spi.h) 2391f61ec45eSEric Nelson CONFIG_SF_DEFAULT_SPEED in Hz 2392f61ec45eSEric Nelson 23933f85ce27Swdenk- SystemACE Support: 23943f85ce27Swdenk CONFIG_SYSTEMACE 23953f85ce27Swdenk 23963f85ce27Swdenk Adding this option adds support for Xilinx SystemACE 23973f85ce27Swdenk chips attached via some sort of local bus. The address 239811ccc33fSMarcel Ziswiler of the chip must also be defined in the 23996d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SYSTEMACE_BASE macro. For example: 24003f85ce27Swdenk 24013f85ce27Swdenk #define CONFIG_SYSTEMACE 24026d0f6bcfSJean-Christophe PLAGNIOL-VILLARD #define CONFIG_SYS_SYSTEMACE_BASE 0xf0000000 24033f85ce27Swdenk 24043f85ce27Swdenk When SystemACE support is added, the "ace" device type 24053f85ce27Swdenk becomes available to the fat commands, i.e. fatls. 24063f85ce27Swdenk 2407ecb0ccd9SWolfgang Denk- TFTP Fixed UDP Port: 2408ecb0ccd9SWolfgang Denk CONFIG_TFTP_PORT 2409ecb0ccd9SWolfgang Denk 241028cb9375SWolfgang Denk If this is defined, the environment variable tftpsrcp 2411ecb0ccd9SWolfgang Denk is used to supply the TFTP UDP source port value. 241228cb9375SWolfgang Denk If tftpsrcp isn't defined, the normal pseudo-random port 2413ecb0ccd9SWolfgang Denk number generator is used. 2414ecb0ccd9SWolfgang Denk 241528cb9375SWolfgang Denk Also, the environment variable tftpdstp is used to supply 241628cb9375SWolfgang Denk the TFTP UDP destination port value. If tftpdstp isn't 241728cb9375SWolfgang Denk defined, the normal port 69 is used. 241828cb9375SWolfgang Denk 241928cb9375SWolfgang Denk The purpose for tftpsrcp is to allow a TFTP server to 2420ecb0ccd9SWolfgang Denk blindly start the TFTP transfer using the pre-configured 2421ecb0ccd9SWolfgang Denk target IP address and UDP port. This has the effect of 2422ecb0ccd9SWolfgang Denk "punching through" the (Windows XP) firewall, allowing 2423ecb0ccd9SWolfgang Denk the remainder of the TFTP transfer to proceed normally. 2424ecb0ccd9SWolfgang Denk A better solution is to properly configure the firewall, 2425ecb0ccd9SWolfgang Denk but sometimes that is not allowed. 2426ecb0ccd9SWolfgang Denk 2427bf36c5d5SSimon Glass- Hashing support: 2428bf36c5d5SSimon Glass CONFIG_CMD_HASH 2429bf36c5d5SSimon Glass 2430bf36c5d5SSimon Glass This enables a generic 'hash' command which can produce 2431bf36c5d5SSimon Glass hashes / digests from a few algorithms (e.g. SHA1, SHA256). 2432bf36c5d5SSimon Glass 2433bf36c5d5SSimon Glass CONFIG_HASH_VERIFY 2434bf36c5d5SSimon Glass 2435bf36c5d5SSimon Glass Enable the hash verify command (hash -v). This adds to code 2436bf36c5d5SSimon Glass size a little. 2437bf36c5d5SSimon Glass 2438bf36c5d5SSimon Glass CONFIG_SHA1 - support SHA1 hashing 2439bf36c5d5SSimon Glass CONFIG_SHA256 - support SHA256 hashing 2440bf36c5d5SSimon Glass 2441bf36c5d5SSimon Glass Note: There is also a sha1sum command, which should perhaps 2442bf36c5d5SSimon Glass be deprecated in favour of 'hash sha1'. 2443bf36c5d5SSimon Glass 2444a8c7c708Swdenk- Show boot progress: 2445c609719bSwdenk CONFIG_SHOW_BOOT_PROGRESS 2446c609719bSwdenk 2447c609719bSwdenk Defining this option allows to add some board- 2448c609719bSwdenk specific code (calling a user-provided function 2449c609719bSwdenk "show_boot_progress(int)") that enables you to show 2450c609719bSwdenk the system's boot progress on some display (for 2451c609719bSwdenk example, some LED's) on your board. At the moment, 2452c609719bSwdenk the following checkpoints are implemented: 2453c609719bSwdenk 24543a608ca0SSimon Glass- Detailed boot stage timing 24553a608ca0SSimon Glass CONFIG_BOOTSTAGE 24563a608ca0SSimon Glass Define this option to get detailed timing of each stage 24573a608ca0SSimon Glass of the boot process. 24583a608ca0SSimon Glass 24593a608ca0SSimon Glass CONFIG_BOOTSTAGE_USER_COUNT 24603a608ca0SSimon Glass This is the number of available user bootstage records. 24613a608ca0SSimon Glass Each time you call bootstage_mark(BOOTSTAGE_ID_ALLOC, ...) 24623a608ca0SSimon Glass a new ID will be allocated from this stash. If you exceed 24633a608ca0SSimon Glass the limit, recording will stop. 24643a608ca0SSimon Glass 24653a608ca0SSimon Glass CONFIG_BOOTSTAGE_REPORT 24663a608ca0SSimon Glass Define this to print a report before boot, similar to this: 24673a608ca0SSimon Glass 24683a608ca0SSimon Glass Timer summary in microseconds: 24693a608ca0SSimon Glass Mark Elapsed Stage 24703a608ca0SSimon Glass 0 0 reset 24713a608ca0SSimon Glass 3,575,678 3,575,678 board_init_f start 24723a608ca0SSimon Glass 3,575,695 17 arch_cpu_init A9 24733a608ca0SSimon Glass 3,575,777 82 arch_cpu_init done 24743a608ca0SSimon Glass 3,659,598 83,821 board_init_r start 24753a608ca0SSimon Glass 3,910,375 250,777 main_loop 24763a608ca0SSimon Glass 29,916,167 26,005,792 bootm_start 24773a608ca0SSimon Glass 30,361,327 445,160 start_kernel 24783a608ca0SSimon Glass 24792eba38cfSSimon Glass CONFIG_CMD_BOOTSTAGE 24802eba38cfSSimon Glass Add a 'bootstage' command which supports printing a report 24812eba38cfSSimon Glass and un/stashing of bootstage data. 24822eba38cfSSimon Glass 248394fd1316SSimon Glass CONFIG_BOOTSTAGE_FDT 248494fd1316SSimon Glass Stash the bootstage information in the FDT. A root 'bootstage' 248594fd1316SSimon Glass node is created with each bootstage id as a child. Each child 248694fd1316SSimon Glass has a 'name' property and either 'mark' containing the 248794fd1316SSimon Glass mark time in microsecond, or 'accum' containing the 248894fd1316SSimon Glass accumulated time for that bootstage id in microseconds. 248994fd1316SSimon Glass For example: 249094fd1316SSimon Glass 249194fd1316SSimon Glass bootstage { 249294fd1316SSimon Glass 154 { 249394fd1316SSimon Glass name = "board_init_f"; 249494fd1316SSimon Glass mark = <3575678>; 249594fd1316SSimon Glass }; 249694fd1316SSimon Glass 170 { 249794fd1316SSimon Glass name = "lcd"; 249894fd1316SSimon Glass accum = <33482>; 249994fd1316SSimon Glass }; 250094fd1316SSimon Glass }; 250194fd1316SSimon Glass 250294fd1316SSimon Glass Code in the Linux kernel can find this in /proc/devicetree. 250394fd1316SSimon Glass 25041372cce2SMarian BalakowiczLegacy uImage format: 25051372cce2SMarian Balakowicz 2506c609719bSwdenk Arg Where When 2507c609719bSwdenk 1 common/cmd_bootm.c before attempting to boot an image 2508c609719bSwdenk -1 common/cmd_bootm.c Image header has bad magic number 2509c609719bSwdenk 2 common/cmd_bootm.c Image header has correct magic number 2510c609719bSwdenk -2 common/cmd_bootm.c Image header has bad checksum 2511c609719bSwdenk 3 common/cmd_bootm.c Image header has correct checksum 2512c609719bSwdenk -3 common/cmd_bootm.c Image data has bad checksum 2513c609719bSwdenk 4 common/cmd_bootm.c Image data has correct checksum 2514c609719bSwdenk -4 common/cmd_bootm.c Image is for unsupported architecture 2515c609719bSwdenk 5 common/cmd_bootm.c Architecture check OK 25161372cce2SMarian Balakowicz -5 common/cmd_bootm.c Wrong Image Type (not kernel, multi) 2517c609719bSwdenk 6 common/cmd_bootm.c Image Type check OK 2518c609719bSwdenk -6 common/cmd_bootm.c gunzip uncompression error 2519c609719bSwdenk -7 common/cmd_bootm.c Unimplemented compression type 2520c609719bSwdenk 7 common/cmd_bootm.c Uncompression OK 25211372cce2SMarian Balakowicz 8 common/cmd_bootm.c No uncompress/copy overwrite error 2522c609719bSwdenk -9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX) 25231372cce2SMarian Balakowicz 25241372cce2SMarian Balakowicz 9 common/image.c Start initial ramdisk verification 25251372cce2SMarian Balakowicz -10 common/image.c Ramdisk header has bad magic number 25261372cce2SMarian Balakowicz -11 common/image.c Ramdisk header has bad checksum 25271372cce2SMarian Balakowicz 10 common/image.c Ramdisk header is OK 25281372cce2SMarian Balakowicz -12 common/image.c Ramdisk data has bad checksum 25291372cce2SMarian Balakowicz 11 common/image.c Ramdisk data has correct checksum 25301372cce2SMarian Balakowicz 12 common/image.c Ramdisk verification complete, start loading 253111ccc33fSMarcel Ziswiler -13 common/image.c Wrong Image Type (not PPC Linux ramdisk) 25321372cce2SMarian Balakowicz 13 common/image.c Start multifile image verification 25331372cce2SMarian Balakowicz 14 common/image.c No initial ramdisk, no multifile, continue. 25341372cce2SMarian Balakowicz 2535ea0364f1SPeter Tyser 15 arch/<arch>/lib/bootm.c All preparation done, transferring control to OS 2536c609719bSwdenk 2537a47a12beSStefan Roese -30 arch/powerpc/lib/board.c Fatal error, hang the system 253863e73c9aSwdenk -31 post/post.c POST test failed, detected by post_output_backlog() 253963e73c9aSwdenk -32 post/post.c POST test failed, detected by post_run_single() 254063e73c9aSwdenk 2541566a494fSHeiko Schocher 34 common/cmd_doc.c before loading a Image from a DOC device 2542566a494fSHeiko Schocher -35 common/cmd_doc.c Bad usage of "doc" command 2543566a494fSHeiko Schocher 35 common/cmd_doc.c correct usage of "doc" command 2544566a494fSHeiko Schocher -36 common/cmd_doc.c No boot device 2545566a494fSHeiko Schocher 36 common/cmd_doc.c correct boot device 2546566a494fSHeiko Schocher -37 common/cmd_doc.c Unknown Chip ID on boot device 2547566a494fSHeiko Schocher 37 common/cmd_doc.c correct chip ID found, device available 2548566a494fSHeiko Schocher -38 common/cmd_doc.c Read Error on boot device 2549566a494fSHeiko Schocher 38 common/cmd_doc.c reading Image header from DOC device OK 2550566a494fSHeiko Schocher -39 common/cmd_doc.c Image header has bad magic number 2551566a494fSHeiko Schocher 39 common/cmd_doc.c Image header has correct magic number 2552566a494fSHeiko Schocher -40 common/cmd_doc.c Error reading Image from DOC device 2553566a494fSHeiko Schocher 40 common/cmd_doc.c Image header has correct magic number 2554566a494fSHeiko Schocher 41 common/cmd_ide.c before loading a Image from a IDE device 2555566a494fSHeiko Schocher -42 common/cmd_ide.c Bad usage of "ide" command 2556566a494fSHeiko Schocher 42 common/cmd_ide.c correct usage of "ide" command 2557566a494fSHeiko Schocher -43 common/cmd_ide.c No boot device 2558566a494fSHeiko Schocher 43 common/cmd_ide.c boot device found 2559566a494fSHeiko Schocher -44 common/cmd_ide.c Device not available 2560566a494fSHeiko Schocher 44 common/cmd_ide.c Device available 2561566a494fSHeiko Schocher -45 common/cmd_ide.c wrong partition selected 2562566a494fSHeiko Schocher 45 common/cmd_ide.c partition selected 2563566a494fSHeiko Schocher -46 common/cmd_ide.c Unknown partition table 2564566a494fSHeiko Schocher 46 common/cmd_ide.c valid partition table found 2565566a494fSHeiko Schocher -47 common/cmd_ide.c Invalid partition type 2566566a494fSHeiko Schocher 47 common/cmd_ide.c correct partition type 2567566a494fSHeiko Schocher -48 common/cmd_ide.c Error reading Image Header on boot device 2568566a494fSHeiko Schocher 48 common/cmd_ide.c reading Image Header from IDE device OK 2569566a494fSHeiko Schocher -49 common/cmd_ide.c Image header has bad magic number 2570566a494fSHeiko Schocher 49 common/cmd_ide.c Image header has correct magic number 2571566a494fSHeiko Schocher -50 common/cmd_ide.c Image header has bad checksum 2572566a494fSHeiko Schocher 50 common/cmd_ide.c Image header has correct checksum 2573566a494fSHeiko Schocher -51 common/cmd_ide.c Error reading Image from IDE device 2574566a494fSHeiko Schocher 51 common/cmd_ide.c reading Image from IDE device OK 2575566a494fSHeiko Schocher 52 common/cmd_nand.c before loading a Image from a NAND device 2576566a494fSHeiko Schocher -53 common/cmd_nand.c Bad usage of "nand" command 2577566a494fSHeiko Schocher 53 common/cmd_nand.c correct usage of "nand" command 2578566a494fSHeiko Schocher -54 common/cmd_nand.c No boot device 2579566a494fSHeiko Schocher 54 common/cmd_nand.c boot device found 2580566a494fSHeiko Schocher -55 common/cmd_nand.c Unknown Chip ID on boot device 2581566a494fSHeiko Schocher 55 common/cmd_nand.c correct chip ID found, device available 2582566a494fSHeiko Schocher -56 common/cmd_nand.c Error reading Image Header on boot device 2583566a494fSHeiko Schocher 56 common/cmd_nand.c reading Image Header from NAND device OK 2584566a494fSHeiko Schocher -57 common/cmd_nand.c Image header has bad magic number 2585566a494fSHeiko Schocher 57 common/cmd_nand.c Image header has correct magic number 2586566a494fSHeiko Schocher -58 common/cmd_nand.c Error reading Image from NAND device 2587566a494fSHeiko Schocher 58 common/cmd_nand.c reading Image from NAND device OK 2588c609719bSwdenk 2589566a494fSHeiko Schocher -60 common/env_common.c Environment has a bad CRC, using default 2590c609719bSwdenk 2591566a494fSHeiko Schocher 64 net/eth.c starting with Ethernet configuration. 2592566a494fSHeiko Schocher -64 net/eth.c no Ethernet found. 2593566a494fSHeiko Schocher 65 net/eth.c Ethernet found. 2594206c60cbSwdenk 2595566a494fSHeiko Schocher -80 common/cmd_net.c usage wrong 2596566a494fSHeiko Schocher 80 common/cmd_net.c before calling NetLoop() 259711ccc33fSMarcel Ziswiler -81 common/cmd_net.c some error in NetLoop() occurred 2598566a494fSHeiko Schocher 81 common/cmd_net.c NetLoop() back without error 2599566a494fSHeiko Schocher -82 common/cmd_net.c size == 0 (File with size 0 loaded) 2600566a494fSHeiko Schocher 82 common/cmd_net.c trying automatic boot 260174de7aefSWolfgang Denk 83 common/cmd_net.c running "source" command 260274de7aefSWolfgang Denk -83 common/cmd_net.c some error in automatic boot or "source" command 2603566a494fSHeiko Schocher 84 common/cmd_net.c end without errors 2604c609719bSwdenk 26051372cce2SMarian BalakowiczFIT uImage format: 26061372cce2SMarian Balakowicz 26071372cce2SMarian Balakowicz Arg Where When 26081372cce2SMarian Balakowicz 100 common/cmd_bootm.c Kernel FIT Image has correct format 26091372cce2SMarian Balakowicz -100 common/cmd_bootm.c Kernel FIT Image has incorrect format 26101372cce2SMarian Balakowicz 101 common/cmd_bootm.c No Kernel subimage unit name, using configuration 26111372cce2SMarian Balakowicz -101 common/cmd_bootm.c Can't get configuration for kernel subimage 26121372cce2SMarian Balakowicz 102 common/cmd_bootm.c Kernel unit name specified 26131372cce2SMarian Balakowicz -103 common/cmd_bootm.c Can't get kernel subimage node offset 2614f773bea8SMarian Balakowicz 103 common/cmd_bootm.c Found configuration node 26151372cce2SMarian Balakowicz 104 common/cmd_bootm.c Got kernel subimage node offset 26161372cce2SMarian Balakowicz -104 common/cmd_bootm.c Kernel subimage hash verification failed 26171372cce2SMarian Balakowicz 105 common/cmd_bootm.c Kernel subimage hash verification OK 26181372cce2SMarian Balakowicz -105 common/cmd_bootm.c Kernel subimage is for unsupported architecture 26191372cce2SMarian Balakowicz 106 common/cmd_bootm.c Architecture check OK 262011ccc33fSMarcel Ziswiler -106 common/cmd_bootm.c Kernel subimage has wrong type 262111ccc33fSMarcel Ziswiler 107 common/cmd_bootm.c Kernel subimage type OK 26221372cce2SMarian Balakowicz -107 common/cmd_bootm.c Can't get kernel subimage data/size 26231372cce2SMarian Balakowicz 108 common/cmd_bootm.c Got kernel subimage data/size 26241372cce2SMarian Balakowicz -108 common/cmd_bootm.c Wrong image type (not legacy, FIT) 26251372cce2SMarian Balakowicz -109 common/cmd_bootm.c Can't get kernel subimage type 26261372cce2SMarian Balakowicz -110 common/cmd_bootm.c Can't get kernel subimage comp 26271372cce2SMarian Balakowicz -111 common/cmd_bootm.c Can't get kernel subimage os 26281372cce2SMarian Balakowicz -112 common/cmd_bootm.c Can't get kernel subimage load address 26291372cce2SMarian Balakowicz -113 common/cmd_bootm.c Image uncompress/copy overwrite error 26301372cce2SMarian Balakowicz 26311372cce2SMarian Balakowicz 120 common/image.c Start initial ramdisk verification 26321372cce2SMarian Balakowicz -120 common/image.c Ramdisk FIT image has incorrect format 26331372cce2SMarian Balakowicz 121 common/image.c Ramdisk FIT image has correct format 263411ccc33fSMarcel Ziswiler 122 common/image.c No ramdisk subimage unit name, using configuration 26351372cce2SMarian Balakowicz -122 common/image.c Can't get configuration for ramdisk subimage 26361372cce2SMarian Balakowicz 123 common/image.c Ramdisk unit name specified 26371372cce2SMarian Balakowicz -124 common/image.c Can't get ramdisk subimage node offset 26381372cce2SMarian Balakowicz 125 common/image.c Got ramdisk subimage node offset 26391372cce2SMarian Balakowicz -125 common/image.c Ramdisk subimage hash verification failed 26401372cce2SMarian Balakowicz 126 common/image.c Ramdisk subimage hash verification OK 26411372cce2SMarian Balakowicz -126 common/image.c Ramdisk subimage for unsupported architecture 26421372cce2SMarian Balakowicz 127 common/image.c Architecture check OK 26431372cce2SMarian Balakowicz -127 common/image.c Can't get ramdisk subimage data/size 26441372cce2SMarian Balakowicz 128 common/image.c Got ramdisk subimage data/size 26451372cce2SMarian Balakowicz 129 common/image.c Can't get ramdisk load address 26461372cce2SMarian Balakowicz -129 common/image.c Got ramdisk load address 26471372cce2SMarian Balakowicz 264811ccc33fSMarcel Ziswiler -130 common/cmd_doc.c Incorrect FIT image format 26491372cce2SMarian Balakowicz 131 common/cmd_doc.c FIT image format OK 26501372cce2SMarian Balakowicz 265111ccc33fSMarcel Ziswiler -140 common/cmd_ide.c Incorrect FIT image format 26521372cce2SMarian Balakowicz 141 common/cmd_ide.c FIT image format OK 26531372cce2SMarian Balakowicz 265411ccc33fSMarcel Ziswiler -150 common/cmd_nand.c Incorrect FIT image format 26551372cce2SMarian Balakowicz 151 common/cmd_nand.c FIT image format OK 26561372cce2SMarian Balakowicz 2657d95f6ec7SGabe Black- FIT image support: 2658d95f6ec7SGabe Black CONFIG_FIT 2659d95f6ec7SGabe Black Enable support for the FIT uImage format. 2660d95f6ec7SGabe Black 2661d95f6ec7SGabe Black CONFIG_FIT_BEST_MATCH 2662d95f6ec7SGabe Black When no configuration is explicitly selected, default to the 2663d95f6ec7SGabe Black one whose fdt's compatibility field best matches that of 2664d95f6ec7SGabe Black U-Boot itself. A match is considered "best" if it matches the 2665d95f6ec7SGabe Black most specific compatibility entry of U-Boot's fdt's root node. 2666d95f6ec7SGabe Black The order of entries in the configuration's fdt is ignored. 2667d95f6ec7SGabe Black 26684cf2609bSWolfgang Denk- Standalone program support: 26694cf2609bSWolfgang Denk CONFIG_STANDALONE_LOAD_ADDR 26704cf2609bSWolfgang Denk 26716feff899SWolfgang Denk This option defines a board specific value for the 26726feff899SWolfgang Denk address where standalone program gets loaded, thus 26736feff899SWolfgang Denk overwriting the architecture dependent default 26744cf2609bSWolfgang Denk settings. 26754cf2609bSWolfgang Denk 26764cf2609bSWolfgang Denk- Frame Buffer Address: 26774cf2609bSWolfgang Denk CONFIG_FB_ADDR 26784cf2609bSWolfgang Denk 26794cf2609bSWolfgang Denk Define CONFIG_FB_ADDR if you want to use specific 26804cf2609bSWolfgang Denk address for frame buffer. 26814cf2609bSWolfgang Denk Then system will reserve the frame buffer address to 26824cf2609bSWolfgang Denk defined address instead of lcd_setmem (this function 26836feff899SWolfgang Denk grabs the memory for frame buffer by panel's size). 26844cf2609bSWolfgang Denk 26854cf2609bSWolfgang Denk Please see board_init_f function. 26864cf2609bSWolfgang Denk 2687cccfc2abSDetlev Zundel- Automatic software updates via TFTP server 2688cccfc2abSDetlev Zundel CONFIG_UPDATE_TFTP 2689cccfc2abSDetlev Zundel CONFIG_UPDATE_TFTP_CNT_MAX 2690cccfc2abSDetlev Zundel CONFIG_UPDATE_TFTP_MSEC_MAX 2691cccfc2abSDetlev Zundel 2692cccfc2abSDetlev Zundel These options enable and control the auto-update feature; 2693cccfc2abSDetlev Zundel for a more detailed description refer to doc/README.update. 2694cccfc2abSDetlev Zundel 2695cccfc2abSDetlev Zundel- MTD Support (mtdparts command, UBI support) 2696cccfc2abSDetlev Zundel CONFIG_MTD_DEVICE 2697cccfc2abSDetlev Zundel 2698cccfc2abSDetlev Zundel Adds the MTD device infrastructure from the Linux kernel. 2699cccfc2abSDetlev Zundel Needed for mtdparts command support. 2700cccfc2abSDetlev Zundel 2701cccfc2abSDetlev Zundel CONFIG_MTD_PARTITIONS 2702cccfc2abSDetlev Zundel 2703cccfc2abSDetlev Zundel Adds the MTD partitioning infrastructure from the Linux 2704cccfc2abSDetlev Zundel kernel. Needed for UBI support. 2705cccfc2abSDetlev Zundel 27066a11cf48SDaniel Schwierzeck- SPL framework 27076a11cf48SDaniel Schwierzeck CONFIG_SPL 27086a11cf48SDaniel Schwierzeck Enable building of SPL globally. 27096a11cf48SDaniel Schwierzeck 271095579793STom Rini CONFIG_SPL_LDSCRIPT 271195579793STom Rini LDSCRIPT for linking the SPL binary. 271295579793STom Rini 271395579793STom Rini CONFIG_SPL_MAX_SIZE 271495579793STom Rini Maximum binary size (text, data and rodata) of the SPL binary. 271595579793STom Rini 27166a11cf48SDaniel Schwierzeck CONFIG_SPL_TEXT_BASE 27176a11cf48SDaniel Schwierzeck TEXT_BASE for linking the SPL binary. 27186a11cf48SDaniel Schwierzeck 271994a45bb1SScott Wood CONFIG_SPL_RELOC_TEXT_BASE 272094a45bb1SScott Wood Address to relocate to. If unspecified, this is equal to 272194a45bb1SScott Wood CONFIG_SPL_TEXT_BASE (i.e. no relocation is done). 272294a45bb1SScott Wood 272395579793STom Rini CONFIG_SPL_BSS_START_ADDR 272495579793STom Rini Link address for the BSS within the SPL binary. 272595579793STom Rini 272695579793STom Rini CONFIG_SPL_BSS_MAX_SIZE 272795579793STom Rini Maximum binary size of the BSS section of the SPL binary. 272895579793STom Rini 272995579793STom Rini CONFIG_SPL_STACK 273095579793STom Rini Adress of the start of the stack SPL will use 273195579793STom Rini 273294a45bb1SScott Wood CONFIG_SPL_RELOC_STACK 273394a45bb1SScott Wood Adress of the start of the stack SPL will use after 273494a45bb1SScott Wood relocation. If unspecified, this is equal to 273594a45bb1SScott Wood CONFIG_SPL_STACK. 273694a45bb1SScott Wood 273795579793STom Rini CONFIG_SYS_SPL_MALLOC_START 273895579793STom Rini Starting address of the malloc pool used in SPL. 273995579793STom Rini 274095579793STom Rini CONFIG_SYS_SPL_MALLOC_SIZE 274195579793STom Rini The size of the malloc pool used in SPL. 27426a11cf48SDaniel Schwierzeck 274347f7bcaeSTom Rini CONFIG_SPL_FRAMEWORK 274447f7bcaeSTom Rini Enable the SPL framework under common/. This framework 274547f7bcaeSTom Rini supports MMC, NAND and YMODEM loading of U-Boot and NAND 274647f7bcaeSTom Rini NAND loading of the Linux Kernel. 274747f7bcaeSTom Rini 2748861a86f4STom Rini CONFIG_SPL_DISPLAY_PRINT 2749861a86f4STom Rini For ARM, enable an optional function to print more information 2750861a86f4STom Rini about the running system. 2751861a86f4STom Rini 27524b919725SScott Wood CONFIG_SPL_INIT_MINIMAL 27534b919725SScott Wood Arch init code should be built for a very small image 27544b919725SScott Wood 27556a11cf48SDaniel Schwierzeck CONFIG_SPL_LIBCOMMON_SUPPORT 27566a11cf48SDaniel Schwierzeck Support for common/libcommon.o in SPL binary 27576a11cf48SDaniel Schwierzeck 27586a11cf48SDaniel Schwierzeck CONFIG_SPL_LIBDISK_SUPPORT 27596a11cf48SDaniel Schwierzeck Support for disk/libdisk.o in SPL binary 27606a11cf48SDaniel Schwierzeck 27616a11cf48SDaniel Schwierzeck CONFIG_SPL_I2C_SUPPORT 27626a11cf48SDaniel Schwierzeck Support for drivers/i2c/libi2c.o in SPL binary 27636a11cf48SDaniel Schwierzeck 27646a11cf48SDaniel Schwierzeck CONFIG_SPL_GPIO_SUPPORT 27656a11cf48SDaniel Schwierzeck Support for drivers/gpio/libgpio.o in SPL binary 27666a11cf48SDaniel Schwierzeck 27676a11cf48SDaniel Schwierzeck CONFIG_SPL_MMC_SUPPORT 27686a11cf48SDaniel Schwierzeck Support for drivers/mmc/libmmc.o in SPL binary 27696a11cf48SDaniel Schwierzeck 277095579793STom Rini CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR, 277195579793STom Rini CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS, 277295579793STom Rini CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 277395579793STom Rini Address, size and partition on the MMC to load U-Boot from 277495579793STom Rini when the MMC is being used in raw mode. 277595579793STom Rini 277695579793STom Rini CONFIG_SPL_FAT_SUPPORT 277795579793STom Rini Support for fs/fat/libfat.o in SPL binary 277895579793STom Rini 277995579793STom Rini CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME 278095579793STom Rini Filename to read to load U-Boot when reading from FAT 278195579793STom Rini 27826f2f01b9SScott Wood CONFIG_SPL_NAND_BASE 27836f2f01b9SScott Wood Include nand_base.c in the SPL. Requires 27846f2f01b9SScott Wood CONFIG_SPL_NAND_DRIVERS. 27856f2f01b9SScott Wood 27866f2f01b9SScott Wood CONFIG_SPL_NAND_DRIVERS 27876f2f01b9SScott Wood SPL uses normal NAND drivers, not minimal drivers. 27886f2f01b9SScott Wood 27896f2f01b9SScott Wood CONFIG_SPL_NAND_ECC 27906f2f01b9SScott Wood Include standard software ECC in the SPL 27916f2f01b9SScott Wood 279295579793STom Rini CONFIG_SPL_NAND_SIMPLE 27937d4b7955SScott Wood Support for NAND boot using simple NAND drivers that 27947d4b7955SScott Wood expose the cmd_ctrl() interface. 279595579793STom Rini 279695579793STom Rini CONFIG_SYS_NAND_5_ADDR_CYCLE, CONFIG_SYS_NAND_PAGE_COUNT, 279795579793STom Rini CONFIG_SYS_NAND_PAGE_SIZE, CONFIG_SYS_NAND_OOBSIZE, 279895579793STom Rini CONFIG_SYS_NAND_BLOCK_SIZE, CONFIG_SYS_NAND_BAD_BLOCK_POS, 279995579793STom Rini CONFIG_SYS_NAND_ECCPOS, CONFIG_SYS_NAND_ECCSIZE, 280095579793STom Rini CONFIG_SYS_NAND_ECCBYTES 280195579793STom Rini Defines the size and behavior of the NAND that SPL uses 28027d4b7955SScott Wood to read U-Boot 280395579793STom Rini 280495579793STom Rini CONFIG_SYS_NAND_U_BOOT_OFFS 28057d4b7955SScott Wood Location in NAND to read U-Boot from 28067d4b7955SScott Wood 28077d4b7955SScott Wood CONFIG_SYS_NAND_U_BOOT_DST 28087d4b7955SScott Wood Location in memory to load U-Boot to 28097d4b7955SScott Wood 28107d4b7955SScott Wood CONFIG_SYS_NAND_U_BOOT_SIZE 28117d4b7955SScott Wood Size of image to load 281295579793STom Rini 281395579793STom Rini CONFIG_SYS_NAND_U_BOOT_START 28147d4b7955SScott Wood Entry point in loaded image to jump to 281595579793STom Rini 281695579793STom Rini CONFIG_SYS_NAND_HW_ECC_OOBFIRST 281795579793STom Rini Define this if you need to first read the OOB and then the 281895579793STom Rini data. This is used for example on davinci plattforms. 281995579793STom Rini 282095579793STom Rini CONFIG_SPL_OMAP3_ID_NAND 282195579793STom Rini Support for an OMAP3-specific set of functions to return the 282295579793STom Rini ID and MFR of the first attached NAND chip, if present. 282395579793STom Rini 28246a11cf48SDaniel Schwierzeck CONFIG_SPL_SERIAL_SUPPORT 28256a11cf48SDaniel Schwierzeck Support for drivers/serial/libserial.o in SPL binary 28266a11cf48SDaniel Schwierzeck 28276a11cf48SDaniel Schwierzeck CONFIG_SPL_SPI_FLASH_SUPPORT 28286a11cf48SDaniel Schwierzeck Support for drivers/mtd/spi/libspi_flash.o in SPL binary 28296a11cf48SDaniel Schwierzeck 28306a11cf48SDaniel Schwierzeck CONFIG_SPL_SPI_SUPPORT 28316a11cf48SDaniel Schwierzeck Support for drivers/spi/libspi.o in SPL binary 28326a11cf48SDaniel Schwierzeck 2833c57b953dSPavel Machek CONFIG_SPL_RAM_DEVICE 2834c57b953dSPavel Machek Support for running image already present in ram, in SPL binary 2835c57b953dSPavel Machek 28366a11cf48SDaniel Schwierzeck CONFIG_SPL_LIBGENERIC_SUPPORT 28376a11cf48SDaniel Schwierzeck Support for lib/libgeneric.o in SPL binary 28381372cce2SMarian Balakowicz 2839ca2fca22SScott Wood CONFIG_SPL_TARGET 2840ca2fca22SScott Wood Final target image containing SPL and payload. Some SPLs 2841ca2fca22SScott Wood use an arch-specific makefile fragment instead, for 2842ca2fca22SScott Wood example if more than one image needs to be produced. 2843ca2fca22SScott Wood 2844c609719bSwdenkModem Support: 2845c609719bSwdenk-------------- 2846c609719bSwdenk 2847566e5cf4SWolfgang Denk[so far only for SMDK2400 boards] 2848c609719bSwdenk 284911ccc33fSMarcel Ziswiler- Modem support enable: 2850c609719bSwdenk CONFIG_MODEM_SUPPORT 2851c609719bSwdenk 2852c609719bSwdenk- RTS/CTS Flow control enable: 2853c609719bSwdenk CONFIG_HWFLOW 2854c609719bSwdenk 2855c609719bSwdenk- Modem debug support: 2856c609719bSwdenk CONFIG_MODEM_SUPPORT_DEBUG 2857c609719bSwdenk 2858c609719bSwdenk Enables debugging stuff (char screen[1024], dbg()) 2859c609719bSwdenk for modem support. Useful only with BDI2000. 2860c609719bSwdenk 2861a8c7c708Swdenk- Interrupt support (PPC): 2862a8c7c708Swdenk 2863a8c7c708Swdenk There are common interrupt_init() and timer_interrupt() 2864a8c7c708Swdenk for all PPC archs. interrupt_init() calls interrupt_init_cpu() 286511ccc33fSMarcel Ziswiler for CPU specific initialization. interrupt_init_cpu() 2866a8c7c708Swdenk should set decrementer_count to appropriate value. If 286711ccc33fSMarcel Ziswiler CPU resets decrementer automatically after interrupt 2868a8c7c708Swdenk (ppc4xx) it should set decrementer_count to zero. 286911ccc33fSMarcel Ziswiler timer_interrupt() calls timer_interrupt_cpu() for CPU 2870a8c7c708Swdenk specific handling. If board has watchdog / status_led 2871a8c7c708Swdenk / other_activity_monitor it works automatically from 2872a8c7c708Swdenk general timer_interrupt(). 2873a8c7c708Swdenk 2874c609719bSwdenk- General: 2875c609719bSwdenk 2876c609719bSwdenk In the target system modem support is enabled when a 2877c609719bSwdenk specific key (key combination) is pressed during 2878c609719bSwdenk power-on. Otherwise U-Boot will boot normally 287911ccc33fSMarcel Ziswiler (autoboot). The key_pressed() function is called from 2880c609719bSwdenk board_init(). Currently key_pressed() is a dummy 2881c609719bSwdenk function, returning 1 and thus enabling modem 2882c609719bSwdenk initialization. 2883c609719bSwdenk 2884c609719bSwdenk If there are no modem init strings in the 2885c609719bSwdenk environment, U-Boot proceed to autoboot; the 2886c609719bSwdenk previous output (banner, info printfs) will be 288711ccc33fSMarcel Ziswiler suppressed, though. 2888c609719bSwdenk 2889c609719bSwdenk See also: doc/README.Modem 2890c609719bSwdenk 28919660e442SHelmut RaigerBoard initialization settings: 28929660e442SHelmut Raiger------------------------------ 28939660e442SHelmut Raiger 28949660e442SHelmut RaigerDuring Initialization u-boot calls a number of board specific functions 28959660e442SHelmut Raigerto allow the preparation of board specific prerequisites, e.g. pin setup 28969660e442SHelmut Raigerbefore drivers are initialized. To enable these callbacks the 28979660e442SHelmut Raigerfollowing configuration macros have to be defined. Currently this is 28989660e442SHelmut Raigerarchitecture specific, so please check arch/your_architecture/lib/board.c 28999660e442SHelmut Raigertypically in board_init_f() and board_init_r(). 29009660e442SHelmut Raiger 29019660e442SHelmut Raiger- CONFIG_BOARD_EARLY_INIT_F: Call board_early_init_f() 29029660e442SHelmut Raiger- CONFIG_BOARD_EARLY_INIT_R: Call board_early_init_r() 29039660e442SHelmut Raiger- CONFIG_BOARD_LATE_INIT: Call board_late_init() 29049660e442SHelmut Raiger- CONFIG_BOARD_POSTCLK_INIT: Call board_postclk_init() 2905c609719bSwdenk 2906c609719bSwdenkConfiguration Settings: 2907c609719bSwdenk----------------------- 2908c609719bSwdenk 29096d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_LONGHELP: Defined when you want long help messages included; 2910c609719bSwdenk undefine this when you're short of memory. 2911c609719bSwdenk 29122fb2604dSPeter Tyser- CONFIG_SYS_HELP_CMD_WIDTH: Defined when you want to override the default 29132fb2604dSPeter Tyser width of the commands listed in the 'help' command output. 29142fb2604dSPeter Tyser 29156d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PROMPT: This is what U-Boot prints on the console to 2916c609719bSwdenk prompt for user input. 2917c609719bSwdenk 29186d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CBSIZE: Buffer size for input from the Console 2919c609719bSwdenk 29206d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PBSIZE: Buffer size for Console output 2921c609719bSwdenk 29226d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAXARGS: max. Number of arguments accepted for monitor commands 2923c609719bSwdenk 29246d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_BARGSIZE: Buffer size for Boot Arguments which are passed to 2925c609719bSwdenk the application (usually a Linux kernel) when it is 2926c609719bSwdenk booted 2927c609719bSwdenk 29286d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_BAUDRATE_TABLE: 2929c609719bSwdenk List of legal baudrate settings for this board. 2930c609719bSwdenk 29316d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CONSOLE_INFO_QUIET 2932c609719bSwdenk Suppress display of console information at boot. 2933c609719bSwdenk 29346d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CONSOLE_IS_IN_ENV 2935c609719bSwdenk If the board specific function 2936c609719bSwdenk extern int overwrite_console (void); 2937c609719bSwdenk returns 1, the stdin, stderr and stdout are switched to the 2938c609719bSwdenk serial port, else the settings in the environment are used. 2939c609719bSwdenk 29406d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 2941c609719bSwdenk Enable the call to overwrite_console(). 2942c609719bSwdenk 29436d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CONSOLE_ENV_OVERWRITE 2944c609719bSwdenk Enable overwrite of previous console environment settings. 2945c609719bSwdenk 29466d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END: 2947c609719bSwdenk Begin and End addresses of the area used by the 2948c609719bSwdenk simple memory test. 2949c609719bSwdenk 29506d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_ALT_MEMTEST: 2951c609719bSwdenk Enable an alternate, more extensive memory test. 2952c609719bSwdenk 29536d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MEMTEST_SCRATCH: 29545f535fe1Swdenk Scratch address used by the alternate memory test 29555f535fe1Swdenk You only need to set this if address zero isn't writeable 29565f535fe1Swdenk 29576d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MEM_TOP_HIDE (PPC only): 29586d0f6bcfSJean-Christophe PLAGNIOL-VILLARD If CONFIG_SYS_MEM_TOP_HIDE is defined in the board config header, 295914f73ca6SStefan Roese this specified memory area will get subtracted from the top 296011ccc33fSMarcel Ziswiler (end) of RAM and won't get "touched" at all by U-Boot. By 296114f73ca6SStefan Roese fixing up gd->ram_size the Linux kernel should gets passed 296214f73ca6SStefan Roese the now "corrected" memory size and won't touch it either. 296314f73ca6SStefan Roese This should work for arch/ppc and arch/powerpc. Only Linux 29645e12e75dSStefan Roese board ports in arch/powerpc with bootwrapper support that 296514f73ca6SStefan Roese recalculate the memory size from the SDRAM controller setup 29665e12e75dSStefan Roese will have to get fixed in Linux additionally. 296714f73ca6SStefan Roese 296814f73ca6SStefan Roese This option can be used as a workaround for the 440EPx/GRx 296914f73ca6SStefan Roese CHIP 11 errata where the last 256 bytes in SDRAM shouldn't 297014f73ca6SStefan Roese be touched. 297114f73ca6SStefan Roese 297214f73ca6SStefan Roese WARNING: Please make sure that this value is a multiple of 297314f73ca6SStefan Roese the Linux page size (normally 4k). If this is not the case, 297414f73ca6SStefan Roese then the end address of the Linux memory will be located at a 297514f73ca6SStefan Roese non page size aligned address and this could cause major 297614f73ca6SStefan Roese problems. 297714f73ca6SStefan Roese 29786d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_TFTP_LOADADDR: 2979c609719bSwdenk Default load address for network file downloads 2980c609719bSwdenk 29816d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_LOADS_BAUD_CHANGE: 2982c609719bSwdenk Enable temporary baudrate change while serial download 2983c609719bSwdenk 29846d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SDRAM_BASE: 2985c609719bSwdenk Physical start address of SDRAM. _Must_ be 0 here. 2986c609719bSwdenk 29876d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MBIO_BASE: 2988c609719bSwdenk Physical start address of Motherboard I/O (if using a 2989c609719bSwdenk Cogent motherboard) 2990c609719bSwdenk 29916d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_BASE: 2992c609719bSwdenk Physical start address of Flash memory. 2993c609719bSwdenk 29946d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MONITOR_BASE: 2995c609719bSwdenk Physical start address of boot monitor code (set by 2996c609719bSwdenk make config files to be same as the text base address 299714d0a02aSWolfgang Denk (CONFIG_SYS_TEXT_BASE) used when linking) - same as 29986d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FLASH_BASE when booting from flash. 2999c609719bSwdenk 30006d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MONITOR_LEN: 30013b57fe0aSwdenk Size of memory reserved for monitor code, used to 30023b57fe0aSwdenk determine _at_compile_time_ (!) if the environment is 30033b57fe0aSwdenk embedded within the U-Boot image, or in a separate 30043b57fe0aSwdenk flash sector. 3005c609719bSwdenk 30066d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MALLOC_LEN: 3007c609719bSwdenk Size of DRAM reserved for malloc() use. 3008c609719bSwdenk 30096d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_BOOTM_LEN: 301015940c9aSStefan Roese Normally compressed uImages are limited to an 301115940c9aSStefan Roese uncompressed size of 8 MBytes. If this is not enough, 30126d0f6bcfSJean-Christophe PLAGNIOL-VILLARD you can define CONFIG_SYS_BOOTM_LEN in your board config file 301315940c9aSStefan Roese to adjust this setting to your needs. 3014c609719bSwdenk 30156d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_BOOTMAPSZ: 3016c609719bSwdenk Maximum size of memory mapped by the startup code of 3017c609719bSwdenk the Linux kernel; all data that must be processed by 30187d721e34SBartlomiej Sieka the Linux kernel (bd_info, boot arguments, FDT blob if 30197d721e34SBartlomiej Sieka used) must be put below this limit, unless "bootm_low" 30207d721e34SBartlomiej Sieka enviroment variable is defined and non-zero. In such case 30217d721e34SBartlomiej Sieka all data for the Linux kernel must be between "bootm_low" 3022c3624e6eSGrant Likely and "bootm_low" + CONFIG_SYS_BOOTMAPSZ. The environment 3023c3624e6eSGrant Likely variable "bootm_mapsize" will override the value of 3024c3624e6eSGrant Likely CONFIG_SYS_BOOTMAPSZ. If CONFIG_SYS_BOOTMAPSZ is undefined, 3025c3624e6eSGrant Likely then the value in "bootm_size" will be used instead. 3026c609719bSwdenk 3027fca43cc8SJohn Rigby- CONFIG_SYS_BOOT_RAMDISK_HIGH: 3028fca43cc8SJohn Rigby Enable initrd_high functionality. If defined then the 3029fca43cc8SJohn Rigby initrd_high feature is enabled and the bootm ramdisk subcommand 3030fca43cc8SJohn Rigby is enabled. 3031fca43cc8SJohn Rigby 3032fca43cc8SJohn Rigby- CONFIG_SYS_BOOT_GET_CMDLINE: 3033fca43cc8SJohn Rigby Enables allocating and saving kernel cmdline in space between 3034fca43cc8SJohn Rigby "bootm_low" and "bootm_low" + BOOTMAPSZ. 3035fca43cc8SJohn Rigby 3036fca43cc8SJohn Rigby- CONFIG_SYS_BOOT_GET_KBD: 3037fca43cc8SJohn Rigby Enables allocating and saving a kernel copy of the bd_info in 3038fca43cc8SJohn Rigby space between "bootm_low" and "bootm_low" + BOOTMAPSZ. 3039fca43cc8SJohn Rigby 30406d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAX_FLASH_BANKS: 3041c609719bSwdenk Max number of Flash memory banks 3042c609719bSwdenk 30436d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAX_FLASH_SECT: 3044c609719bSwdenk Max number of sectors on a Flash chip 3045c609719bSwdenk 30466d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_ERASE_TOUT: 3047c609719bSwdenk Timeout for Flash erase operations (in ms) 3048c609719bSwdenk 30496d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_WRITE_TOUT: 3050c609719bSwdenk Timeout for Flash write operations (in ms) 3051c609719bSwdenk 30526d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_LOCK_TOUT 30538564acf9Swdenk Timeout for Flash set sector lock bit operation (in ms) 30548564acf9Swdenk 30556d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_UNLOCK_TOUT 30568564acf9Swdenk Timeout for Flash clear lock bits operation (in ms) 30578564acf9Swdenk 30586d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_PROTECTION 30598564acf9Swdenk If defined, hardware flash sectors protection is used 30608564acf9Swdenk instead of U-Boot software protection. 30618564acf9Swdenk 30626d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_DIRECT_FLASH_TFTP: 3063c609719bSwdenk 3064c609719bSwdenk Enable TFTP transfers directly to flash memory; 3065c609719bSwdenk without this option such a download has to be 3066c609719bSwdenk performed in two steps: (1) download to RAM, and (2) 3067c609719bSwdenk copy from RAM to flash. 3068c609719bSwdenk 3069c609719bSwdenk The two-step approach is usually more reliable, since 3070c609719bSwdenk you can check if the download worked before you erase 307111ccc33fSMarcel Ziswiler the flash, but in some situations (when system RAM is 307211ccc33fSMarcel Ziswiler too limited to allow for a temporary copy of the 3073c609719bSwdenk downloaded image) this option may be very useful. 3074c609719bSwdenk 30756d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_CFI: 3076c609719bSwdenk Define if the flash driver uses extra elements in the 30775653fc33Swdenk common flash structure for storing flash geometry. 30785653fc33Swdenk 307900b1883aSJean-Christophe PLAGNIOL-VILLARD- CONFIG_FLASH_CFI_DRIVER 30805653fc33Swdenk This option also enables the building of the cfi_flash driver 30815653fc33Swdenk in the drivers directory 308253cf9435Sstroese 308391809ed5SPiotr Ziecik- CONFIG_FLASH_CFI_MTD 308491809ed5SPiotr Ziecik This option enables the building of the cfi_mtd driver 308591809ed5SPiotr Ziecik in the drivers directory. The driver exports CFI flash 308691809ed5SPiotr Ziecik to the MTD layer. 308791809ed5SPiotr Ziecik 30886d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_USE_BUFFER_WRITE 308996ef831fSGuennadi Liakhovetski Use buffered writes to flash. 309096ef831fSGuennadi Liakhovetski 309196ef831fSGuennadi Liakhovetski- CONFIG_FLASH_SPANSION_S29WS_N 309296ef831fSGuennadi Liakhovetski s29ws-n MirrorBit flash has non-standard addresses for buffered 309396ef831fSGuennadi Liakhovetski write commands. 309496ef831fSGuennadi Liakhovetski 30956d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_QUIET_TEST 30965568e613SStefan Roese If this option is defined, the common CFI flash doesn't 30975568e613SStefan Roese print it's warning upon not recognized FLASH banks. This 30985568e613SStefan Roese is useful, if some of the configured banks are only 30995568e613SStefan Roese optionally available. 31005568e613SStefan Roese 31019a042e9cSJerry Van Baren- CONFIG_FLASH_SHOW_PROGRESS 31029a042e9cSJerry Van Baren If defined (must be an integer), print out countdown 31039a042e9cSJerry Van Baren digits and dots. Recommended value: 45 (9..1) for 80 31049a042e9cSJerry Van Baren column displays, 15 (3..1) for 40 column displays. 31059a042e9cSJerry Van Baren 31066d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_RX_ETH_BUFFER: 310711ccc33fSMarcel Ziswiler Defines the number of Ethernet receive buffers. On some 310811ccc33fSMarcel Ziswiler Ethernet controllers it is recommended to set this value 310953cf9435Sstroese to 8 or even higher (EEPRO100 or 405 EMAC), since all 311053cf9435Sstroese buffers can be full shortly after enabling the interface 311111ccc33fSMarcel Ziswiler on high Ethernet traffic. 311253cf9435Sstroese Defaults to 4 if not defined. 3113c609719bSwdenk 3114ea882bafSWolfgang Denk- CONFIG_ENV_MAX_ENTRIES 3115ea882bafSWolfgang Denk 3116ea882bafSWolfgang Denk Maximum number of entries in the hash table that is used 3117ea882bafSWolfgang Denk internally to store the environment settings. The default 3118ea882bafSWolfgang Denk setting is supposed to be generous and should work in most 3119ea882bafSWolfgang Denk cases. This setting can be used to tune behaviour; see 3120ea882bafSWolfgang Denk lib/hashtable.c for details. 3121ea882bafSWolfgang Denk 31222598090bSJoe Hershberger- CONFIG_ENV_FLAGS_LIST_DEFAULT 31232598090bSJoe Hershberger- CONFIG_ENV_FLAGS_LIST_STATIC 31242598090bSJoe Hershberger Enable validation of the values given to enviroment variables when 31252598090bSJoe Hershberger calling env set. Variables can be restricted to only decimal, 31262598090bSJoe Hershberger hexadecimal, or boolean. If CONFIG_CMD_NET is also defined, 31272598090bSJoe Hershberger the variables can also be restricted to IP address or MAC address. 31282598090bSJoe Hershberger 31292598090bSJoe Hershberger The format of the list is: 31302598090bSJoe Hershberger type_attribute = [s|d|x|b|i|m] 3131*267541f7SJoe Hershberger access_atribute = [a|r|o|c] 3132*267541f7SJoe Hershberger attributes = type_attribute[access_atribute] 31332598090bSJoe Hershberger entry = variable_name[:attributes] 31342598090bSJoe Hershberger list = entry[,list] 31352598090bSJoe Hershberger 31362598090bSJoe Hershberger The type attributes are: 31372598090bSJoe Hershberger s - String (default) 31382598090bSJoe Hershberger d - Decimal 31392598090bSJoe Hershberger x - Hexadecimal 31402598090bSJoe Hershberger b - Boolean ([1yYtT|0nNfF]) 31412598090bSJoe Hershberger i - IP address 31422598090bSJoe Hershberger m - MAC address 31432598090bSJoe Hershberger 3144*267541f7SJoe Hershberger The access attributes are: 3145*267541f7SJoe Hershberger a - Any (default) 3146*267541f7SJoe Hershberger r - Read-only 3147*267541f7SJoe Hershberger o - Write-once 3148*267541f7SJoe Hershberger c - Change-default 3149*267541f7SJoe Hershberger 31502598090bSJoe Hershberger - CONFIG_ENV_FLAGS_LIST_DEFAULT 31512598090bSJoe Hershberger Define this to a list (string) to define the ".flags" 31522598090bSJoe Hershberger envirnoment variable in the default or embedded environment. 31532598090bSJoe Hershberger 31542598090bSJoe Hershberger - CONFIG_ENV_FLAGS_LIST_STATIC 31552598090bSJoe Hershberger Define this to a list (string) to define validation that 31562598090bSJoe Hershberger should be done if an entry is not found in the ".flags" 31572598090bSJoe Hershberger environment variable. To override a setting in the static 31582598090bSJoe Hershberger list, simply add an entry for the same variable name to the 31592598090bSJoe Hershberger ".flags" variable. 31602598090bSJoe Hershberger 3161*267541f7SJoe Hershberger- CONFIG_ENV_ACCESS_IGNORE_FORCE 3162*267541f7SJoe Hershberger If defined, don't allow the -f switch to env set override variable 3163*267541f7SJoe Hershberger access flags. 3164*267541f7SJoe Hershberger 3165c609719bSwdenkThe following definitions that deal with the placement and management 3166c609719bSwdenkof environment data (variable area); in general, we support the 3167c609719bSwdenkfollowing configurations: 3168c609719bSwdenk 3169c3eb3fe4SMike Frysinger- CONFIG_BUILD_ENVCRC: 3170c3eb3fe4SMike Frysinger 3171c3eb3fe4SMike Frysinger Builds up envcrc with the target environment so that external utils 3172c3eb3fe4SMike Frysinger may easily extract it and embed it in final U-Boot images. 3173c3eb3fe4SMike Frysinger 31745a1aceb0SJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_FLASH: 3175c609719bSwdenk 3176c609719bSwdenk Define this if the environment is in flash memory. 3177c609719bSwdenk 3178c609719bSwdenk a) The environment occupies one whole flash sector, which is 3179c609719bSwdenk "embedded" in the text segment with the U-Boot code. This 3180c609719bSwdenk happens usually with "bottom boot sector" or "top boot 3181c609719bSwdenk sector" type flash chips, which have several smaller 3182c609719bSwdenk sectors at the start or the end. For instance, such a 3183c609719bSwdenk layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In 3184c609719bSwdenk such a case you would place the environment in one of the 3185c609719bSwdenk 4 kB sectors - with U-Boot code before and after it. With 3186c609719bSwdenk "top boot sector" type flash chips, you would put the 3187c609719bSwdenk environment in one of the last sectors, leaving a gap 3188c609719bSwdenk between U-Boot and the environment. 3189c609719bSwdenk 31900e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_OFFSET: 3191c609719bSwdenk 3192c609719bSwdenk Offset of environment data (variable area) to the 3193c609719bSwdenk beginning of flash memory; for instance, with bottom boot 3194c609719bSwdenk type flash chips the second sector can be used: the offset 3195c609719bSwdenk for this sector is given here. 3196c609719bSwdenk 31976d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE. 3198c609719bSwdenk 31990e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_ADDR: 3200c609719bSwdenk 3201c609719bSwdenk This is just another way to specify the start address of 3202c609719bSwdenk the flash sector containing the environment (instead of 32030e8d1586SJean-Christophe PLAGNIOL-VILLARD CONFIG_ENV_OFFSET). 3204c609719bSwdenk 32050e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SECT_SIZE: 3206c609719bSwdenk 3207c609719bSwdenk Size of the sector containing the environment. 3208c609719bSwdenk 3209c609719bSwdenk 3210c609719bSwdenk b) Sometimes flash chips have few, equal sized, BIG sectors. 3211c609719bSwdenk In such a case you don't want to spend a whole sector for 3212c609719bSwdenk the environment. 3213c609719bSwdenk 32140e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SIZE: 3215c609719bSwdenk 32165a1aceb0SJean-Christophe PLAGNIOL-VILLARD If you use this in combination with CONFIG_ENV_IS_IN_FLASH 32170e8d1586SJean-Christophe PLAGNIOL-VILLARD and CONFIG_ENV_SECT_SIZE, you can specify to use only a part 3218c609719bSwdenk of this flash sector for the environment. This saves 3219c609719bSwdenk memory for the RAM copy of the environment. 3220c609719bSwdenk 3221c609719bSwdenk It may also save flash memory if you decide to use this 3222c609719bSwdenk when your environment is "embedded" within U-Boot code, 3223c609719bSwdenk since then the remainder of the flash sector could be used 3224c609719bSwdenk for U-Boot code. It should be pointed out that this is 3225c609719bSwdenk STRONGLY DISCOURAGED from a robustness point of view: 3226c609719bSwdenk updating the environment in flash makes it always 3227c609719bSwdenk necessary to erase the WHOLE sector. If something goes 3228c609719bSwdenk wrong before the contents has been restored from a copy in 3229c609719bSwdenk RAM, your target system will be dead. 3230c609719bSwdenk 32310e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_ADDR_REDUND 32320e8d1586SJean-Christophe PLAGNIOL-VILLARD CONFIG_ENV_SIZE_REDUND 3233c609719bSwdenk 3234c609719bSwdenk These settings describe a second storage area used to hold 323511ccc33fSMarcel Ziswiler a redundant copy of the environment data, so that there is 32363e38691eSwdenk a valid backup copy in case there is a power failure during 3237c609719bSwdenk a "saveenv" operation. 3238c609719bSwdenk 3239c609719bSwdenkBE CAREFUL! Any changes to the flash layout, and some changes to the 3240c609719bSwdenksource code will make it necessary to adapt <board>/u-boot.lds* 3241c609719bSwdenkaccordingly! 3242c609719bSwdenk 3243c609719bSwdenk 32449314cee6SJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_NVRAM: 3245c609719bSwdenk 3246c609719bSwdenk Define this if you have some non-volatile memory device 3247c609719bSwdenk (NVRAM, battery buffered SRAM) which you want to use for the 3248c609719bSwdenk environment. 3249c609719bSwdenk 32500e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_ADDR: 32510e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SIZE: 3252c609719bSwdenk 325311ccc33fSMarcel Ziswiler These two #defines are used to determine the memory area you 3254c609719bSwdenk want to use for environment. It is assumed that this memory 3255c609719bSwdenk can just be read and written to, without any special 3256c609719bSwdenk provision. 3257c609719bSwdenk 3258c609719bSwdenkBE CAREFUL! The first access to the environment happens quite early 3259c609719bSwdenkin U-Boot initalization (when we try to get the setting of for the 326011ccc33fSMarcel Ziswilerconsole baudrate). You *MUST* have mapped your NVRAM area then, or 3261c609719bSwdenkU-Boot will hang. 3262c609719bSwdenk 3263c609719bSwdenkPlease note that even with NVRAM we still use a copy of the 3264c609719bSwdenkenvironment in RAM: we could work on NVRAM directly, but we want to 3265c609719bSwdenkkeep settings there always unmodified except somebody uses "saveenv" 3266c609719bSwdenkto save the current settings. 3267c609719bSwdenk 3268c609719bSwdenk 3269bb1f8b4fSJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_EEPROM: 3270c609719bSwdenk 3271c609719bSwdenk Use this if you have an EEPROM or similar serial access 3272c609719bSwdenk device and a driver for it. 3273c609719bSwdenk 32740e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_OFFSET: 32750e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SIZE: 3276c609719bSwdenk 3277c609719bSwdenk These two #defines specify the offset and size of the 3278c609719bSwdenk environment area within the total memory of your EEPROM. 3279c609719bSwdenk 32806d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_I2C_EEPROM_ADDR: 3281c609719bSwdenk If defined, specified the chip address of the EEPROM device. 3282c609719bSwdenk The default address is zero. 3283c609719bSwdenk 32846d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_EEPROM_PAGE_WRITE_BITS: 3285c609719bSwdenk If defined, the number of bits used to address bytes in a 3286c609719bSwdenk single page in the EEPROM device. A 64 byte page, for example 3287c609719bSwdenk would require six bits. 3288c609719bSwdenk 32896d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS: 3290c609719bSwdenk If defined, the number of milliseconds to delay between 3291c609719bSwdenk page writes. The default is zero milliseconds. 3292c609719bSwdenk 32936d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_I2C_EEPROM_ADDR_LEN: 3294c609719bSwdenk The length in bytes of the EEPROM memory array address. Note 3295c609719bSwdenk that this is NOT the chip address length! 3296c609719bSwdenk 32976d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW: 32985cf91d6bSwdenk EEPROM chips that implement "address overflow" are ones 32995cf91d6bSwdenk like Catalyst 24WC04/08/16 which has 9/10/11 bits of 33005cf91d6bSwdenk address and the extra bits end up in the "chip address" bit 33015cf91d6bSwdenk slots. This makes a 24WC08 (1Kbyte) chip look like four 256 33025cf91d6bSwdenk byte chips. 33035cf91d6bSwdenk 33045cf91d6bSwdenk Note that we consider the length of the address field to 33055cf91d6bSwdenk still be one byte because the extra address bits are hidden 33065cf91d6bSwdenk in the chip address. 33075cf91d6bSwdenk 33086d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_EEPROM_SIZE: 3309c609719bSwdenk The size in bytes of the EEPROM device. 3310c609719bSwdenk 3311548738b4SHeiko Schocher - CONFIG_ENV_EEPROM_IS_ON_I2C 3312548738b4SHeiko Schocher define this, if you have I2C and SPI activated, and your 3313548738b4SHeiko Schocher EEPROM, which holds the environment, is on the I2C bus. 3314548738b4SHeiko Schocher 3315548738b4SHeiko Schocher - CONFIG_I2C_ENV_EEPROM_BUS 3316548738b4SHeiko Schocher if you have an Environment on an EEPROM reached over 3317548738b4SHeiko Schocher I2C muxes, you can define here, how to reach this 3318548738b4SHeiko Schocher EEPROM. For example: 3319548738b4SHeiko Schocher 3320548738b4SHeiko Schocher #define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0" 3321548738b4SHeiko Schocher 3322548738b4SHeiko Schocher EEPROM which holds the environment, is reached over 3323548738b4SHeiko Schocher a pca9547 i2c mux with address 0x70, channel 3. 3324c609719bSwdenk 3325057c849cSJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_DATAFLASH: 33265779d8d9Swdenk 33275779d8d9Swdenk Define this if you have a DataFlash memory device which you 33285779d8d9Swdenk want to use for the environment. 33295779d8d9Swdenk 33300e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_OFFSET: 33310e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_ADDR: 33320e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SIZE: 33335779d8d9Swdenk 33345779d8d9Swdenk These three #defines specify the offset and size of the 33355779d8d9Swdenk environment area within the total memory of your DataFlash placed 33365779d8d9Swdenk at the specified address. 33375779d8d9Swdenk 33380a85a9e7SLiu Gang- CONFIG_ENV_IS_IN_REMOTE: 33390a85a9e7SLiu Gang 33400a85a9e7SLiu Gang Define this if you have a remote memory space which you 33410a85a9e7SLiu Gang want to use for the local device's environment. 33420a85a9e7SLiu Gang 33430a85a9e7SLiu Gang - CONFIG_ENV_ADDR: 33440a85a9e7SLiu Gang - CONFIG_ENV_SIZE: 33450a85a9e7SLiu Gang 33460a85a9e7SLiu Gang These two #defines specify the address and size of the 33470a85a9e7SLiu Gang environment area within the remote memory space. The 33480a85a9e7SLiu Gang local device can get the environment from remote memory 3349fc54c7faSLiu Gang space by SRIO or PCIE links. 33500a85a9e7SLiu Gang 33510a85a9e7SLiu GangBE CAREFUL! For some special cases, the local device can not use 33520a85a9e7SLiu Gang"saveenv" command. For example, the local device will get the 3353fc54c7faSLiu Gangenvironment stored in a remote NOR flash by SRIO or PCIE link, 3354fc54c7faSLiu Gangbut it can not erase, write this NOR flash by SRIO or PCIE interface. 33550a85a9e7SLiu Gang 335651bfee19SJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_NAND: 335713a5695bSwdenk 335813a5695bSwdenk Define this if you have a NAND device which you want to use 335913a5695bSwdenk for the environment. 336013a5695bSwdenk 33610e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_OFFSET: 33620e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SIZE: 336313a5695bSwdenk 336413a5695bSwdenk These two #defines specify the offset and size of the environment 3365fdd813deSScott Wood area within the first NAND device. CONFIG_ENV_OFFSET must be 3366fdd813deSScott Wood aligned to an erase block boundary. 33675779d8d9Swdenk 3368fdd813deSScott Wood - CONFIG_ENV_OFFSET_REDUND (optional): 3369e443c944SMarkus Klotzbuecher 33700e8d1586SJean-Christophe PLAGNIOL-VILLARD This setting describes a second storage area of CONFIG_ENV_SIZE 3371fdd813deSScott Wood size used to hold a redundant copy of the environment data, so 3372fdd813deSScott Wood that there is a valid backup copy in case there is a power failure 3373fdd813deSScott Wood during a "saveenv" operation. CONFIG_ENV_OFFSET_RENDUND must be 3374fdd813deSScott Wood aligned to an erase block boundary. 3375e443c944SMarkus Klotzbuecher 3376fdd813deSScott Wood - CONFIG_ENV_RANGE (optional): 3377fdd813deSScott Wood 3378fdd813deSScott Wood Specifies the length of the region in which the environment 3379fdd813deSScott Wood can be written. This should be a multiple of the NAND device's 3380fdd813deSScott Wood block size. Specifying a range with more erase blocks than 3381fdd813deSScott Wood are needed to hold CONFIG_ENV_SIZE allows bad blocks within 3382fdd813deSScott Wood the range to be avoided. 3383fdd813deSScott Wood 3384fdd813deSScott Wood - CONFIG_ENV_OFFSET_OOB (optional): 3385fdd813deSScott Wood 3386fdd813deSScott Wood Enables support for dynamically retrieving the offset of the 3387fdd813deSScott Wood environment from block zero's out-of-band data. The 3388fdd813deSScott Wood "nand env.oob" command can be used to record this offset. 3389fdd813deSScott Wood Currently, CONFIG_ENV_OFFSET_REDUND is not supported when 3390fdd813deSScott Wood using CONFIG_ENV_OFFSET_OOB. 3391e443c944SMarkus Klotzbuecher 3392b74ab737SGuennadi Liakhovetski- CONFIG_NAND_ENV_DST 3393b74ab737SGuennadi Liakhovetski 3394b74ab737SGuennadi Liakhovetski Defines address in RAM to which the nand_spl code should copy the 3395b74ab737SGuennadi Liakhovetski environment. If redundant environment is used, it will be copied to 3396b74ab737SGuennadi Liakhovetski CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE. 3397b74ab737SGuennadi Liakhovetski 33986d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SPI_INIT_OFFSET 3399c609719bSwdenk 3400c609719bSwdenk Defines offset to the initial SPI buffer area in DPRAM. The 3401c609719bSwdenk area is used at an early stage (ROM part) if the environment 3402c609719bSwdenk is configured to reside in the SPI EEPROM: We need a 520 byte 3403c609719bSwdenk scratch DPRAM area. It is used between the two initialization 3404c609719bSwdenk calls (spi_init_f() and spi_init_r()). A value of 0xB00 seems 3405c609719bSwdenk to be a good choice since it makes it far enough from the 3406c609719bSwdenk start of the data area as well as from the stack pointer. 3407c609719bSwdenk 3408e881cb56SBruce AdlerPlease note that the environment is read-only until the monitor 3409c609719bSwdenkhas been relocated to RAM and a RAM copy of the environment has been 3410cdb74977SWolfgang Denkcreated; also, when using EEPROM you will have to use getenv_f() 3411c609719bSwdenkuntil then to read environment variables. 3412c609719bSwdenk 341385ec0bccSwdenkThe environment is protected by a CRC32 checksum. Before the monitor 341485ec0bccSwdenkis relocated into RAM, as a result of a bad CRC you will be working 341585ec0bccSwdenkwith the compiled-in default environment - *silently*!!! [This is 341685ec0bccSwdenknecessary, because the first environment variable we need is the 341785ec0bccSwdenk"baudrate" setting for the console - if we have a bad CRC, we don't 341885ec0bccSwdenkhave any device yet where we could complain.] 3419c609719bSwdenk 3420c609719bSwdenkNote: once the monitor has been relocated, then it will complain if 3421c609719bSwdenkthe default environment is used; a new CRC is computed as soon as you 342285ec0bccSwdenkuse the "saveenv" command to store a valid environment. 3423c609719bSwdenk 34246d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FAULT_ECHO_LINK_DOWN: 3425fc3e2165Swdenk Echo the inverted Ethernet link state to the fault LED. 3426fc3e2165Swdenk 34276d0f6bcfSJean-Christophe PLAGNIOL-VILLARD Note: If this option is active, then CONFIG_SYS_FAULT_MII_ADDR 3428fc3e2165Swdenk also needs to be defined. 3429fc3e2165Swdenk 34306d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FAULT_MII_ADDR: 3431fc3e2165Swdenk MII address of the PHY to check for the Ethernet link state. 3432c609719bSwdenk 3433f5675aa5SRon Madrid- CONFIG_NS16550_MIN_FUNCTIONS: 3434f5675aa5SRon Madrid Define this if you desire to only have use of the NS16550_init 3435f5675aa5SRon Madrid and NS16550_putc functions for the serial driver located at 3436f5675aa5SRon Madrid drivers/serial/ns16550.c. This option is useful for saving 3437f5675aa5SRon Madrid space for already greatly restricted images, including but not 3438f5675aa5SRon Madrid limited to NAND_SPL configurations. 3439f5675aa5SRon Madrid 3440c609719bSwdenkLow Level (hardware related) configuration options: 3441dc7c9a1aSwdenk--------------------------------------------------- 3442c609719bSwdenk 34436d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CACHELINE_SIZE: 3444c609719bSwdenk Cache Line Size of the CPU. 3445c609719bSwdenk 34466d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_DEFAULT_IMMR: 3447c609719bSwdenk Default address of the IMMR after system reset. 34482535d602Swdenk 34492535d602Swdenk Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU, 34502535d602Swdenk and RPXsuper) to be able to adjust the position of 34512535d602Swdenk the IMMR register after a reset. 3452c609719bSwdenk 3453e46fedfeSTimur Tabi- CONFIG_SYS_CCSRBAR_DEFAULT: 3454e46fedfeSTimur Tabi Default (power-on reset) physical address of CCSR on Freescale 3455e46fedfeSTimur Tabi PowerPC SOCs. 3456e46fedfeSTimur Tabi 3457e46fedfeSTimur Tabi- CONFIG_SYS_CCSRBAR: 3458e46fedfeSTimur Tabi Virtual address of CCSR. On a 32-bit build, this is typically 3459e46fedfeSTimur Tabi the same value as CONFIG_SYS_CCSRBAR_DEFAULT. 3460e46fedfeSTimur Tabi 3461e46fedfeSTimur Tabi CONFIG_SYS_DEFAULT_IMMR must also be set to this value, 3462e46fedfeSTimur Tabi for cross-platform code that uses that macro instead. 3463e46fedfeSTimur Tabi 3464e46fedfeSTimur Tabi- CONFIG_SYS_CCSRBAR_PHYS: 3465e46fedfeSTimur Tabi Physical address of CCSR. CCSR can be relocated to a new 3466e46fedfeSTimur Tabi physical address, if desired. In this case, this macro should 3467e46fedfeSTimur Tabi be set to that address. Otherwise, it should be set to the 3468e46fedfeSTimur Tabi same value as CONFIG_SYS_CCSRBAR_DEFAULT. For example, CCSR 3469e46fedfeSTimur Tabi is typically relocated on 36-bit builds. It is recommended 3470e46fedfeSTimur Tabi that this macro be defined via the _HIGH and _LOW macros: 3471e46fedfeSTimur Tabi 3472e46fedfeSTimur Tabi #define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH 3473e46fedfeSTimur Tabi * 1ull) << 32 | CONFIG_SYS_CCSRBAR_PHYS_LOW) 3474e46fedfeSTimur Tabi 3475e46fedfeSTimur Tabi- CONFIG_SYS_CCSRBAR_PHYS_HIGH: 3476e46fedfeSTimur Tabi Bits 33-36 of CONFIG_SYS_CCSRBAR_PHYS. This value is typically 3477e46fedfeSTimur Tabi either 0 (32-bit build) or 0xF (36-bit build). This macro is 3478e46fedfeSTimur Tabi used in assembly code, so it must not contain typecasts or 3479e46fedfeSTimur Tabi integer size suffixes (e.g. "ULL"). 3480e46fedfeSTimur Tabi 3481e46fedfeSTimur Tabi- CONFIG_SYS_CCSRBAR_PHYS_LOW: 3482e46fedfeSTimur Tabi Lower 32-bits of CONFIG_SYS_CCSRBAR_PHYS. This macro is 3483e46fedfeSTimur Tabi used in assembly code, so it must not contain typecasts or 3484e46fedfeSTimur Tabi integer size suffixes (e.g. "ULL"). 3485e46fedfeSTimur Tabi 3486e46fedfeSTimur Tabi- CONFIG_SYS_CCSR_DO_NOT_RELOCATE: 3487e46fedfeSTimur Tabi If this macro is defined, then CONFIG_SYS_CCSRBAR_PHYS will be 3488e46fedfeSTimur Tabi forced to a value that ensures that CCSR is not relocated. 3489e46fedfeSTimur Tabi 34907f6c2cbcSwdenk- Floppy Disk Support: 34916d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FDC_DRIVE_NUMBER 34927f6c2cbcSwdenk 34937f6c2cbcSwdenk the default drive number (default value 0) 34947f6c2cbcSwdenk 34956d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_ISA_IO_STRIDE 34967f6c2cbcSwdenk 349711ccc33fSMarcel Ziswiler defines the spacing between FDC chipset registers 34987f6c2cbcSwdenk (default value 1) 34997f6c2cbcSwdenk 35006d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_ISA_IO_OFFSET 35017f6c2cbcSwdenk 35027f6c2cbcSwdenk defines the offset of register from address. It 35037f6c2cbcSwdenk depends on which part of the data bus is connected to 350411ccc33fSMarcel Ziswiler the FDC chipset. (default value 0) 35057f6c2cbcSwdenk 35066d0f6bcfSJean-Christophe PLAGNIOL-VILLARD If CONFIG_SYS_ISA_IO_STRIDE CONFIG_SYS_ISA_IO_OFFSET and 35076d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FDC_DRIVE_NUMBER are undefined, they take their 35087f6c2cbcSwdenk default value. 35097f6c2cbcSwdenk 35106d0f6bcfSJean-Christophe PLAGNIOL-VILLARD if CONFIG_SYS_FDC_HW_INIT is defined, then the function 35117f6c2cbcSwdenk fdc_hw_init() is called at the beginning of the FDC 35127f6c2cbcSwdenk setup. fdc_hw_init() must be provided by the board 35137f6c2cbcSwdenk source code. It is used to make hardware dependant 35147f6c2cbcSwdenk initializations. 35157f6c2cbcSwdenk 35160abddf82SMacpaul Lin- CONFIG_IDE_AHB: 35170abddf82SMacpaul Lin Most IDE controllers were designed to be connected with PCI 35180abddf82SMacpaul Lin interface. Only few of them were designed for AHB interface. 35190abddf82SMacpaul Lin When software is doing ATA command and data transfer to 35200abddf82SMacpaul Lin IDE devices through IDE-AHB controller, some additional 35210abddf82SMacpaul Lin registers accessing to these kind of IDE-AHB controller 35220abddf82SMacpaul Lin is requierd. 35230abddf82SMacpaul Lin 35246d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_IMMR: Physical address of the Internal Memory. 352525d6712aSwdenk DO NOT CHANGE unless you know exactly what you're 352625d6712aSwdenk doing! (11-4) [MPC8xx/82xx systems only] 3527c609719bSwdenk 35286d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_INIT_RAM_ADDR: 3529c609719bSwdenk 35307152b1d0Swdenk Start address of memory area that can be used for 3531c609719bSwdenk initial data and stack; please note that this must be 3532c609719bSwdenk writable memory that is working WITHOUT special 3533c609719bSwdenk initialization, i. e. you CANNOT use normal RAM which 3534c609719bSwdenk will become available only after programming the 3535c609719bSwdenk memory controller and running certain initialization 3536c609719bSwdenk sequences. 3537c609719bSwdenk 3538c609719bSwdenk U-Boot uses the following memory types: 3539c609719bSwdenk - MPC8xx and MPC8260: IMMR (internal memory of the CPU) 3540c609719bSwdenk - MPC824X: data cache 3541c609719bSwdenk - PPC4xx: data cache 3542c609719bSwdenk 35436d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_GBL_DATA_OFFSET: 3544c609719bSwdenk 3545c609719bSwdenk Offset of the initial data structure in the memory 35466d0f6bcfSJean-Christophe PLAGNIOL-VILLARD area defined by CONFIG_SYS_INIT_RAM_ADDR. Usually 35476d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_GBL_DATA_OFFSET is chosen such that the initial 3548c609719bSwdenk data is located at the end of the available space 3549553f0982SWolfgang Denk (sometimes written as (CONFIG_SYS_INIT_RAM_SIZE - 35506d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_INIT_DATA_SIZE), and the initial stack is just 35516d0f6bcfSJean-Christophe PLAGNIOL-VILLARD below that area (growing from (CONFIG_SYS_INIT_RAM_ADDR + 35526d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_GBL_DATA_OFFSET) downward. 3553c609719bSwdenk 3554c609719bSwdenk Note: 3555c609719bSwdenk On the MPC824X (or other systems that use the data 3556c609719bSwdenk cache for initial memory) the address chosen for 35576d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_INIT_RAM_ADDR is basically arbitrary - it must 3558c609719bSwdenk point to an otherwise UNUSED address space between 3559c609719bSwdenk the top of RAM and the start of the PCI space. 3560c609719bSwdenk 35616d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SIUMCR: SIU Module Configuration (11-6) 3562c609719bSwdenk 35636d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SYPCR: System Protection Control (11-9) 3564c609719bSwdenk 35656d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_TBSCR: Time Base Status and Control (11-26) 3566c609719bSwdenk 35676d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PISCR: Periodic Interrupt Status and Control (11-31) 3568c609719bSwdenk 35696d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PLPRCR: PLL, Low-Power, and Reset Control Register (15-30) 3570c609719bSwdenk 35716d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SCCR: System Clock and reset Control Register (15-27) 3572c609719bSwdenk 35736d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_OR_TIMING_SDRAM: 3574c609719bSwdenk SDRAM timing 3575c609719bSwdenk 35766d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAMR_PTA: 3577c609719bSwdenk periodic timer for refresh 3578c609719bSwdenk 35796d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_DER: Debug Event Register (37-47) 3580c609719bSwdenk 35816d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- FLASH_BASE0_PRELIM, FLASH_BASE1_PRELIM, CONFIG_SYS_REMAP_OR_AM, 35826d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PRELIM_OR_AM, CONFIG_SYS_OR_TIMING_FLASH, CONFIG_SYS_OR0_REMAP, 35836d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR1_REMAP, CONFIG_SYS_OR1_PRELIM, 35846d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_BR1_PRELIM: 3585c609719bSwdenk Memory Controller Definitions: BR0/1 and OR0/1 (FLASH) 3586c609719bSwdenk 3587c609719bSwdenk- SDRAM_BASE2_PRELIM, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE, 35886d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_OR_TIMING_SDRAM, CONFIG_SYS_OR2_PRELIM, CONFIG_SYS_BR2_PRELIM, 35896d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_OR3_PRELIM, CONFIG_SYS_BR3_PRELIM: 3590c609719bSwdenk Memory Controller Definitions: BR2/3 and OR2/3 (SDRAM) 3591c609719bSwdenk 35926d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAMR_PTA, CONFIG_SYS_MPTPR_2BK_4K, CONFIG_SYS_MPTPR_1BK_4K, CONFIG_SYS_MPTPR_2BK_8K, 35936d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_MPTPR_1BK_8K, CONFIG_SYS_MAMR_8COL, CONFIG_SYS_MAMR_9COL: 3594c609719bSwdenk Machine Mode Register and Memory Periodic Timer 3595c609719bSwdenk Prescaler definitions (SDRAM timing) 3596c609719bSwdenk 35976d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_I2C_UCODE_PATCH, CONFIG_SYS_I2C_DPMEM_OFFSET [0x1FC0]: 3598c609719bSwdenk enable I2C microcode relocation patch (MPC8xx); 3599c609719bSwdenk define relocation offset in DPRAM [DSP2] 3600c609719bSwdenk 36016d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SMC_UCODE_PATCH, CONFIG_SYS_SMC_DPMEM_OFFSET [0x1FC0]: 3602b423d055SHeiko Schocher enable SMC microcode relocation patch (MPC8xx); 3603b423d055SHeiko Schocher define relocation offset in DPRAM [SMC1] 3604b423d055SHeiko Schocher 36056d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SPI_UCODE_PATCH, CONFIG_SYS_SPI_DPMEM_OFFSET [0x1FC0]: 3606c609719bSwdenk enable SPI microcode relocation patch (MPC8xx); 3607c609719bSwdenk define relocation offset in DPRAM [SCC4] 3608c609719bSwdenk 36096d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_USE_OSCCLK: 3610c609719bSwdenk Use OSCM clock mode on MBX8xx board. Be careful, 3611c609719bSwdenk wrong setting might damage your board. Read 3612c609719bSwdenk doc/README.MBX before setting this variable! 3613c609719bSwdenk 36146d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CPM_POST_WORD_ADDR: (MPC8xx, MPC8260 only) 3615ea909b76Swdenk Offset of the bootmode word in DPRAM used by post 3616ea909b76Swdenk (Power On Self Tests). This definition overrides 3617ea909b76Swdenk #define'd default value in commproc.h resp. 3618ea909b76Swdenk cpm_8260.h. 3619ea909b76Swdenk 36206d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PCI_SLV_MEM_LOCAL, CONFIG_SYS_PCI_SLV_MEM_BUS, CONFIG_SYS_PICMR0_MASK_ATTRIB, 36216d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PCI_MSTR0_LOCAL, CONFIG_SYS_PCIMSK0_MASK, CONFIG_SYS_PCI_MSTR1_LOCAL, 36226d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PCIMSK1_MASK, CONFIG_SYS_PCI_MSTR_MEM_LOCAL, CONFIG_SYS_PCI_MSTR_MEM_BUS, 36236d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_CPU_PCI_MEM_START, CONFIG_SYS_PCI_MSTR_MEM_SIZE, CONFIG_SYS_POCMR0_MASK_ATTRIB, 36246d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL, CONFIG_SYS_PCI_MSTR_MEMIO_BUS, CPU_PCI_MEMIO_START, 36256d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PCI_MSTR_MEMIO_SIZE, CONFIG_SYS_POCMR1_MASK_ATTRIB, CONFIG_SYS_PCI_MSTR_IO_LOCAL, 36266d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PCI_MSTR_IO_BUS, CONFIG_SYS_CPU_PCI_IO_START, CONFIG_SYS_PCI_MSTR_IO_SIZE, 36276d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_POCMR2_MASK_ATTRIB: (MPC826x only) 3628a47a12beSStefan Roese Overrides the default PCI memory map in arch/powerpc/cpu/mpc8260/pci.c if set. 36295d232d0eSwdenk 36309cacf4fcSDirk Eibach- CONFIG_PCI_DISABLE_PCIE: 36319cacf4fcSDirk Eibach Disable PCI-Express on systems where it is supported but not 36329cacf4fcSDirk Eibach required. 36339cacf4fcSDirk Eibach 363469fd2d3bSAndrew Sharp- CONFIG_PCI_ENUM_ONLY 363569fd2d3bSAndrew Sharp Only scan through and get the devices on the busses. 363669fd2d3bSAndrew Sharp Don't do any setup work, presumably because someone or 363769fd2d3bSAndrew Sharp something has already done it, and we don't need to do it 363869fd2d3bSAndrew Sharp a second time. Useful for platforms that are pre-booted 363969fd2d3bSAndrew Sharp by coreboot or similar. 364069fd2d3bSAndrew Sharp 3641a09b9b68SKumar Gala- CONFIG_SYS_SRIO: 3642a09b9b68SKumar Gala Chip has SRIO or not 3643a09b9b68SKumar Gala 3644a09b9b68SKumar Gala- CONFIG_SRIO1: 3645a09b9b68SKumar Gala Board has SRIO 1 port available 3646a09b9b68SKumar Gala 3647a09b9b68SKumar Gala- CONFIG_SRIO2: 3648a09b9b68SKumar Gala Board has SRIO 2 port available 3649a09b9b68SKumar Gala 3650a09b9b68SKumar Gala- CONFIG_SYS_SRIOn_MEM_VIRT: 3651a09b9b68SKumar Gala Virtual Address of SRIO port 'n' memory region 3652a09b9b68SKumar Gala 3653a09b9b68SKumar Gala- CONFIG_SYS_SRIOn_MEM_PHYS: 3654a09b9b68SKumar Gala Physical Address of SRIO port 'n' memory region 3655a09b9b68SKumar Gala 3656a09b9b68SKumar Gala- CONFIG_SYS_SRIOn_MEM_SIZE: 3657a09b9b68SKumar Gala Size of SRIO port 'n' memory region 3658a09b9b68SKumar Gala 3659eced4626SAlex Waterman- CONFIG_SYS_NDFC_16 3660eced4626SAlex Waterman Defined to tell the NDFC that the NAND chip is using a 3661eced4626SAlex Waterman 16 bit bus. 3662eced4626SAlex Waterman 3663eced4626SAlex Waterman- CONFIG_SYS_NDFC_EBC0_CFG 3664eced4626SAlex Waterman Sets the EBC0_CFG register for the NDFC. If not defined 3665eced4626SAlex Waterman a default value will be used. 3666eced4626SAlex Waterman 3667bb99ad6dSBen Warren- CONFIG_SPD_EEPROM 3668218ca724SWolfgang Denk Get DDR timing information from an I2C EEPROM. Common 3669218ca724SWolfgang Denk with pluggable memory modules such as SODIMMs 3670218ca724SWolfgang Denk 3671bb99ad6dSBen Warren SPD_EEPROM_ADDRESS 3672bb99ad6dSBen Warren I2C address of the SPD EEPROM 3673bb99ad6dSBen Warren 36746d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SPD_BUS_NUM 3675218ca724SWolfgang Denk If SPD EEPROM is on an I2C bus other than the first 3676218ca724SWolfgang Denk one, specify here. Note that the value must resolve 3677218ca724SWolfgang Denk to something your driver can deal with. 3678bb99ad6dSBen Warren 36791b3e3c4fSYork Sun- CONFIG_SYS_DDR_RAW_TIMING 36801b3e3c4fSYork Sun Get DDR timing information from other than SPD. Common with 36811b3e3c4fSYork Sun soldered DDR chips onboard without SPD. DDR raw timing 36821b3e3c4fSYork Sun parameters are extracted from datasheet and hard-coded into 36831b3e3c4fSYork Sun header files or board specific files. 36841b3e3c4fSYork Sun 36856f5e1dc5SYork Sun- CONFIG_FSL_DDR_INTERACTIVE 36866f5e1dc5SYork Sun Enable interactive DDR debugging. See doc/README.fsl-ddr. 36876f5e1dc5SYork Sun 36886d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_83XX_DDR_USES_CS0 3689218ca724SWolfgang Denk Only for 83xx systems. If specified, then DDR should 3690218ca724SWolfgang Denk be configured using CS0 and CS1 instead of CS2 and CS3. 36912ad6b513STimur Tabi 3692c26e454dSwdenk- CONFIG_ETHER_ON_FEC[12] 3693c26e454dSwdenk Define to enable FEC[12] on a 8xx series processor. 3694c26e454dSwdenk 3695c26e454dSwdenk- CONFIG_FEC[12]_PHY 3696c26e454dSwdenk Define to the hardcoded PHY address which corresponds 36976e592385Swdenk to the given FEC; i. e. 3698c26e454dSwdenk #define CONFIG_FEC1_PHY 4 3699c26e454dSwdenk means that the PHY with address 4 is connected to FEC1 3700c26e454dSwdenk 3701c26e454dSwdenk When set to -1, means to probe for first available. 3702c26e454dSwdenk 3703c26e454dSwdenk- CONFIG_FEC[12]_PHY_NORXERR 3704c26e454dSwdenk The PHY does not have a RXERR line (RMII only). 3705c26e454dSwdenk (so program the FEC to ignore it). 3706c26e454dSwdenk 3707c26e454dSwdenk- CONFIG_RMII 3708c26e454dSwdenk Enable RMII mode for all FECs. 3709c26e454dSwdenk Note that this is a global option, we can't 3710c26e454dSwdenk have one FEC in standard MII mode and another in RMII mode. 3711c26e454dSwdenk 37125cf91d6bSwdenk- CONFIG_CRC32_VERIFY 37135cf91d6bSwdenk Add a verify option to the crc32 command. 37145cf91d6bSwdenk The syntax is: 37155cf91d6bSwdenk 37165cf91d6bSwdenk => crc32 -v <address> <count> <crc32> 37175cf91d6bSwdenk 37185cf91d6bSwdenk Where address/count indicate a memory area 37195cf91d6bSwdenk and crc32 is the correct crc32 which the 37205cf91d6bSwdenk area should have. 37215cf91d6bSwdenk 372256523f12Swdenk- CONFIG_LOOPW 372356523f12Swdenk Add the "loopw" memory command. This only takes effect if 3724602ad3b3SJon Loeliger the memory commands are activated globally (CONFIG_CMD_MEM). 372556523f12Swdenk 37267b466641Sstroese- CONFIG_MX_CYCLIC 37277b466641Sstroese Add the "mdc" and "mwc" memory commands. These are cyclic 37287b466641Sstroese "md/mw" commands. 37297b466641Sstroese Examples: 37307b466641Sstroese 37317b466641Sstroese => mdc.b 10 4 500 37327b466641Sstroese This command will print 4 bytes (10,11,12,13) each 500 ms. 37337b466641Sstroese 37347b466641Sstroese => mwc.l 100 12345678 10 37357b466641Sstroese This command will write 12345678 to address 100 all 10 ms. 37367b466641Sstroese 37377b466641Sstroese This only takes effect if the memory commands are activated 3738602ad3b3SJon Loeliger globally (CONFIG_CMD_MEM). 37397b466641Sstroese 37408aa1a2d1Swdenk- CONFIG_SKIP_LOWLEVEL_INIT 3741afc1ce82SMacpaul Lin [ARM, NDS32, MIPS only] If this variable is defined, then certain 3742e03f3169SWolfgang Denk low level initializations (like setting up the memory 3743e03f3169SWolfgang Denk controller) are omitted and/or U-Boot does not 3744e03f3169SWolfgang Denk relocate itself into RAM. 37458aa1a2d1Swdenk 3746e03f3169SWolfgang Denk Normally this variable MUST NOT be defined. The only 3747e03f3169SWolfgang Denk exception is when U-Boot is loaded (to RAM) by some 3748e03f3169SWolfgang Denk other boot loader or by a debugger which performs 3749e03f3169SWolfgang Denk these initializations itself. 37508aa1a2d1Swdenk 3751401bb30bSAneesh V- CONFIG_SPL_BUILD 3752df81238bSMagnus Lilja Modifies the behaviour of start.S when compiling a loader 3753df81238bSMagnus Lilja that is executed before the actual U-Boot. E.g. when 3754df81238bSMagnus Lilja compiling a NAND SPL. 3755400558b5Swdenk 3756d8834a13SMatthias Weisser- CONFIG_USE_ARCH_MEMCPY 3757d8834a13SMatthias Weisser CONFIG_USE_ARCH_MEMSET 3758d8834a13SMatthias Weisser If these options are used a optimized version of memcpy/memset will 3759d8834a13SMatthias Weisser be used if available. These functions may be faster under some 3760d8834a13SMatthias Weisser conditions but may increase the binary size. 3761d8834a13SMatthias Weisser 3762b16f521aSGabe Black- CONFIG_X86_NO_RESET_VECTOR 3763b16f521aSGabe Black If defined, the x86 reset vector code is excluded. You will need 3764b16f521aSGabe Black to do this when U-Boot is running from Coreboot. 3765b16f521aSGabe Black 37665b5ece9eSGabe Black- CONFIG_X86_NO_REAL_MODE 37675b5ece9eSGabe Black If defined, x86 real mode code is omitted. This assumes a 37685b5ece9eSGabe Black 32-bit environment where such code is not needed. You will 37695b5ece9eSGabe Black need to do this when U-Boot is running from Coreboot. 37705b5ece9eSGabe Black 37715b5ece9eSGabe Black 3772f2717b47STimur TabiFreescale QE/FMAN Firmware Support: 3773f2717b47STimur Tabi----------------------------------- 3774f2717b47STimur Tabi 3775f2717b47STimur TabiThe Freescale QUICCEngine (QE) and Frame Manager (FMAN) both support the 3776f2717b47STimur Tabiloading of "firmware", which is encoded in the QE firmware binary format. 3777f2717b47STimur TabiThis firmware often needs to be loaded during U-Boot booting, so macros 3778f2717b47STimur Tabiare used to identify the storage device (NOR flash, SPI, etc) and the address 3779f2717b47STimur Tabiwithin that device. 3780f2717b47STimur Tabi 3781f2717b47STimur Tabi- CONFIG_SYS_QE_FMAN_FW_ADDR 3782f2717b47STimur Tabi The address in the storage device where the firmware is located. The 3783f2717b47STimur Tabi meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro 3784f2717b47STimur Tabi is also specified. 3785f2717b47STimur Tabi 3786f2717b47STimur Tabi- CONFIG_SYS_QE_FMAN_FW_LENGTH 3787f2717b47STimur Tabi The maximum possible size of the firmware. The firmware binary format 3788f2717b47STimur Tabi has a field that specifies the actual size of the firmware, but it 3789f2717b47STimur Tabi might not be possible to read any part of the firmware unless some 3790f2717b47STimur Tabi local storage is allocated to hold the entire firmware first. 3791f2717b47STimur Tabi 3792f2717b47STimur Tabi- CONFIG_SYS_QE_FMAN_FW_IN_NOR 3793f2717b47STimur Tabi Specifies that QE/FMAN firmware is located in NOR flash, mapped as 3794f2717b47STimur Tabi normal addressable memory via the LBC. CONFIG_SYS_FMAN_FW_ADDR is the 3795f2717b47STimur Tabi virtual address in NOR flash. 3796f2717b47STimur Tabi 3797f2717b47STimur Tabi- CONFIG_SYS_QE_FMAN_FW_IN_NAND 3798f2717b47STimur Tabi Specifies that QE/FMAN firmware is located in NAND flash. 3799f2717b47STimur Tabi CONFIG_SYS_FMAN_FW_ADDR is the offset within NAND flash. 3800f2717b47STimur Tabi 3801f2717b47STimur Tabi- CONFIG_SYS_QE_FMAN_FW_IN_MMC 3802f2717b47STimur Tabi Specifies that QE/FMAN firmware is located on the primary SD/MMC 3803f2717b47STimur Tabi device. CONFIG_SYS_FMAN_FW_ADDR is the byte offset on that device. 3804f2717b47STimur Tabi 3805f2717b47STimur Tabi- CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH 3806f2717b47STimur Tabi Specifies that QE/FMAN firmware is located on the primary SPI 3807f2717b47STimur Tabi device. CONFIG_SYS_FMAN_FW_ADDR is the byte offset on that device. 3808f2717b47STimur Tabi 3809292dc6c5SLiu Gang- CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 3810292dc6c5SLiu Gang Specifies that QE/FMAN firmware is located in the remote (master) 3811292dc6c5SLiu Gang memory space. CONFIG_SYS_FMAN_FW_ADDR is a virtual address which 3812fc54c7faSLiu Gang can be mapped from slave TLB->slave LAW->slave SRIO or PCIE outbound 3813fc54c7faSLiu Gang window->master inbound window->master LAW->the ucode address in 3814fc54c7faSLiu Gang master's memory space. 3815f2717b47STimur Tabi 3816c609719bSwdenkBuilding the Software: 3817c609719bSwdenk====================== 3818c609719bSwdenk 3819218ca724SWolfgang DenkBuilding U-Boot has been tested in several native build environments 3820218ca724SWolfgang Denkand in many different cross environments. Of course we cannot support 3821218ca724SWolfgang Denkall possibly existing versions of cross development tools in all 3822218ca724SWolfgang Denk(potentially obsolete) versions. In case of tool chain problems we 3823218ca724SWolfgang Denkrecommend to use the ELDK (see http://www.denx.de/wiki/DULG/ELDK) 3824218ca724SWolfgang Denkwhich is extensively used to build and test U-Boot. 3825c609719bSwdenk 3826218ca724SWolfgang DenkIf you are not using a native environment, it is assumed that you 3827218ca724SWolfgang Denkhave GNU cross compiling tools available in your path. In this case, 3828218ca724SWolfgang Denkyou must set the environment variable CROSS_COMPILE in your shell. 3829218ca724SWolfgang DenkNote that no changes to the Makefile or any other source files are 3830218ca724SWolfgang Denknecessary. For example using the ELDK on a 4xx CPU, please enter: 3831c609719bSwdenk 3832218ca724SWolfgang Denk $ CROSS_COMPILE=ppc_4xx- 3833218ca724SWolfgang Denk $ export CROSS_COMPILE 3834c609719bSwdenk 38352f8d396bSPeter TyserNote: If you wish to generate Windows versions of the utilities in 38362f8d396bSPeter Tyser the tools directory you can use the MinGW toolchain 38372f8d396bSPeter Tyser (http://www.mingw.org). Set your HOST tools to the MinGW 38382f8d396bSPeter Tyser toolchain and execute 'make tools'. For example: 38392f8d396bSPeter Tyser 38402f8d396bSPeter Tyser $ make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools 38412f8d396bSPeter Tyser 38422f8d396bSPeter Tyser Binaries such as tools/mkimage.exe will be created which can 38432f8d396bSPeter Tyser be executed on computers running Windows. 38442f8d396bSPeter Tyser 3845c609719bSwdenkU-Boot is intended to be simple to build. After installing the 3846c609719bSwdenksources you must configure U-Boot for one specific board type. This 3847c609719bSwdenkis done by typing: 3848c609719bSwdenk 3849c609719bSwdenk make NAME_config 3850c609719bSwdenk 3851218ca724SWolfgang Denkwhere "NAME_config" is the name of one of the existing configu- 38524d675ae6SMichael Jonesrations; see boards.cfg for supported names. 385354387ac9Swdenk 3854c609719bSwdenkNote: for some board special configuration names may exist; check if 3855c609719bSwdenk additional information is available from the board vendor; for 38562729af9dSwdenk instance, the TQM823L systems are available without (standard) 38572729af9dSwdenk or with LCD support. You can select such additional "features" 385811ccc33fSMarcel Ziswiler when choosing the configuration, i. e. 3859c609719bSwdenk 38602729af9dSwdenk make TQM823L_config 38612729af9dSwdenk - will configure for a plain TQM823L, i. e. no LCD support 3862c609719bSwdenk 3863c609719bSwdenk make TQM823L_LCD_config 3864c609719bSwdenk - will configure for a TQM823L with U-Boot console on LCD 3865c609719bSwdenk 3866c609719bSwdenk etc. 3867c609719bSwdenk 3868c609719bSwdenk 3869c609719bSwdenkFinally, type "make all", and you should get some working U-Boot 38707152b1d0Swdenkimages ready for download to / installation on your system: 3871c609719bSwdenk 3872c609719bSwdenk- "u-boot.bin" is a raw binary image 3873c609719bSwdenk- "u-boot" is an image in ELF binary format 3874c609719bSwdenk- "u-boot.srec" is in Motorola S-Record format 3875c609719bSwdenk 3876baf31249SMarian BalakowiczBy default the build is performed locally and the objects are saved 3877baf31249SMarian Balakowiczin the source directory. One of the two methods can be used to change 3878baf31249SMarian Balakowiczthis behavior and build U-Boot to some external directory: 3879baf31249SMarian Balakowicz 3880baf31249SMarian Balakowicz1. Add O= to the make command line invocations: 3881baf31249SMarian Balakowicz 3882baf31249SMarian Balakowicz make O=/tmp/build distclean 3883baf31249SMarian Balakowicz make O=/tmp/build NAME_config 3884baf31249SMarian Balakowicz make O=/tmp/build all 3885baf31249SMarian Balakowicz 3886baf31249SMarian Balakowicz2. Set environment variable BUILD_DIR to point to the desired location: 3887baf31249SMarian Balakowicz 3888baf31249SMarian Balakowicz export BUILD_DIR=/tmp/build 3889baf31249SMarian Balakowicz make distclean 3890baf31249SMarian Balakowicz make NAME_config 3891baf31249SMarian Balakowicz make all 3892baf31249SMarian Balakowicz 3893baf31249SMarian BalakowiczNote that the command line "O=" setting overrides the BUILD_DIR environment 3894baf31249SMarian Balakowiczvariable. 3895baf31249SMarian Balakowicz 3896c609719bSwdenk 3897c609719bSwdenkPlease be aware that the Makefiles assume you are using GNU make, so 3898c609719bSwdenkfor instance on NetBSD you might need to use "gmake" instead of 3899c609719bSwdenknative "make". 3900c609719bSwdenk 3901c609719bSwdenk 3902c609719bSwdenkIf the system board that you have is not listed, then you will need 3903c609719bSwdenkto port U-Boot to your hardware platform. To do this, follow these 3904c609719bSwdenksteps: 3905c609719bSwdenk 3906c609719bSwdenk1. Add a new configuration option for your board to the toplevel 39074d675ae6SMichael Jones "boards.cfg" file, using the existing entries as examples. 39084d675ae6SMichael Jones Follow the instructions there to keep the boards in order. 3909c609719bSwdenk2. Create a new directory to hold your board specific code. Add any 391085ec0bccSwdenk files you need. In your board directory, you will need at least 391185ec0bccSwdenk the "Makefile", a "<board>.c", "flash.c" and "u-boot.lds". 391285ec0bccSwdenk3. Create a new configuration file "include/configs/<board>.h" for 391385ec0bccSwdenk your board 3914c609719bSwdenk3. If you're porting U-Boot to a new CPU, then also create a new 3915c609719bSwdenk directory to hold your CPU specific code. Add any files you need. 391685ec0bccSwdenk4. Run "make <board>_config" with your new name. 3917c609719bSwdenk5. Type "make", and you should get a working "u-boot.srec" file 3918c609719bSwdenk to be installed on your target system. 391985ec0bccSwdenk6. Debug and solve any problems that might arise. 3920c609719bSwdenk [Of course, this last step is much harder than it sounds.] 3921c609719bSwdenk 3922c609719bSwdenk 3923c609719bSwdenkTesting of U-Boot Modifications, Ports to New Hardware, etc.: 3924c609719bSwdenk============================================================== 3925c609719bSwdenk 3926c609719bSwdenkIf you have modified U-Boot sources (for instance added a new board 3927c609719bSwdenkor support for new devices, a new CPU, etc.) you are expected to 3928c609719bSwdenkprovide feedback to the other developers. The feedback normally takes 3929c609719bSwdenkthe form of a "patch", i. e. a context diff against a certain (latest 3930218ca724SWolfgang Denkofficial or latest in the git repository) version of U-Boot sources. 3931c609719bSwdenk 3932c609719bSwdenkBut before you submit such a patch, please verify that your modifi- 3933c609719bSwdenkcation did not break existing code. At least make sure that *ALL* of 3934c609719bSwdenkthe supported boards compile WITHOUT ANY compiler warnings. To do so, 3935c609719bSwdenkjust run the "MAKEALL" script, which will configure and build U-Boot 3936c609719bSwdenkfor ALL supported system. Be warned, this will take a while. You can 39377152b1d0Swdenkselect which (cross) compiler to use by passing a `CROSS_COMPILE' 3938218ca724SWolfgang Denkenvironment variable to the script, i. e. to use the ELDK cross tools 3939218ca724SWolfgang Denkyou can type 3940c609719bSwdenk 3941c609719bSwdenk CROSS_COMPILE=ppc_8xx- MAKEALL 3942c609719bSwdenk 3943c609719bSwdenkor to build on a native PowerPC system you can type 3944c609719bSwdenk 3945c609719bSwdenk CROSS_COMPILE=' ' MAKEALL 3946c609719bSwdenk 3947218ca724SWolfgang DenkWhen using the MAKEALL script, the default behaviour is to build 3948218ca724SWolfgang DenkU-Boot in the source directory. This location can be changed by 3949218ca724SWolfgang Denksetting the BUILD_DIR environment variable. Also, for each target 3950218ca724SWolfgang Denkbuilt, the MAKEALL script saves two log files (<target>.ERR and 3951218ca724SWolfgang Denk<target>.MAKEALL) in the <source dir>/LOG directory. This default 3952218ca724SWolfgang Denklocation can be changed by setting the MAKEALL_LOGDIR environment 3953218ca724SWolfgang Denkvariable. For example: 3954baf31249SMarian Balakowicz 3955baf31249SMarian Balakowicz export BUILD_DIR=/tmp/build 3956baf31249SMarian Balakowicz export MAKEALL_LOGDIR=/tmp/log 3957baf31249SMarian Balakowicz CROSS_COMPILE=ppc_8xx- MAKEALL 3958baf31249SMarian Balakowicz 3959218ca724SWolfgang DenkWith the above settings build objects are saved in the /tmp/build, 3960218ca724SWolfgang Denklog files are saved in the /tmp/log and the source tree remains clean 3961218ca724SWolfgang Denkduring the whole build process. 3962baf31249SMarian Balakowicz 3963baf31249SMarian Balakowicz 3964c609719bSwdenkSee also "U-Boot Porting Guide" below. 3965c609719bSwdenk 3966c609719bSwdenk 3967c609719bSwdenkMonitor Commands - Overview: 3968c609719bSwdenk============================ 3969c609719bSwdenk 3970c609719bSwdenkgo - start application at address 'addr' 3971c609719bSwdenkrun - run commands in an environment variable 3972c609719bSwdenkbootm - boot application image from memory 3973c609719bSwdenkbootp - boot image via network using BootP/TFTP protocol 397444f074c7SMarek Vasutbootz - boot zImage from memory 3975c609719bSwdenktftpboot- boot image via network using TFTP protocol 3976c609719bSwdenk and env variables "ipaddr" and "serverip" 3977c609719bSwdenk (and eventually "gatewayip") 39781fb7cd49SSimon Glasstftpput - upload a file via network using TFTP protocol 3979c609719bSwdenkrarpboot- boot image via network using RARP/TFTP protocol 3980c609719bSwdenkdiskboot- boot from IDE devicebootd - boot default, i.e., run 'bootcmd' 3981c609719bSwdenkloads - load S-Record file over serial line 3982c609719bSwdenkloadb - load binary file over serial line (kermit mode) 3983c609719bSwdenkmd - memory display 3984c609719bSwdenkmm - memory modify (auto-incrementing) 3985c609719bSwdenknm - memory modify (constant address) 3986c609719bSwdenkmw - memory write (fill) 3987c609719bSwdenkcp - memory copy 3988c609719bSwdenkcmp - memory compare 3989c609719bSwdenkcrc32 - checksum calculation 39900f89c54bSPeter Tyseri2c - I2C sub-system 3991c609719bSwdenksspi - SPI utility commands 3992c609719bSwdenkbase - print or set address offset 3993c609719bSwdenkprintenv- print environment variables 3994c609719bSwdenksetenv - set environment variables 3995c609719bSwdenksaveenv - save environment variables to persistent storage 3996c609719bSwdenkprotect - enable or disable FLASH write protection 3997c609719bSwdenkerase - erase FLASH memory 3998c609719bSwdenkflinfo - print FLASH memory information 399910635afaSKarl O. Pincnand - NAND memory operations (see doc/README.nand) 4000c609719bSwdenkbdinfo - print Board Info structure 4001c609719bSwdenkiminfo - print header information for application image 4002c609719bSwdenkconinfo - print console devices and informations 4003c609719bSwdenkide - IDE sub-system 4004c609719bSwdenkloop - infinite loop on address range 400556523f12Swdenkloopw - infinite write loop on address range 4006c609719bSwdenkmtest - simple RAM test 4007c609719bSwdenkicache - enable or disable instruction cache 4008c609719bSwdenkdcache - enable or disable data cache 4009c609719bSwdenkreset - Perform RESET of the CPU 4010c609719bSwdenkecho - echo args to console 4011c609719bSwdenkversion - print monitor version 4012c609719bSwdenkhelp - print online help 4013c609719bSwdenk? - alias for 'help' 4014c609719bSwdenk 4015c609719bSwdenk 4016c609719bSwdenkMonitor Commands - Detailed Description: 4017c609719bSwdenk======================================== 4018c609719bSwdenk 4019c609719bSwdenkTODO. 4020c609719bSwdenk 4021c609719bSwdenkFor now: just type "help <command>". 4022c609719bSwdenk 4023c609719bSwdenk 4024c609719bSwdenkEnvironment Variables: 4025c609719bSwdenk====================== 4026c609719bSwdenk 4027c609719bSwdenkU-Boot supports user configuration using Environment Variables which 4028c609719bSwdenkcan be made persistent by saving to Flash memory. 4029c609719bSwdenk 4030c609719bSwdenkEnvironment Variables are set using "setenv", printed using 4031c609719bSwdenk"printenv", and saved to Flash using "saveenv". Using "setenv" 4032c609719bSwdenkwithout a value can be used to delete a variable from the 4033c609719bSwdenkenvironment. As long as you don't save the environment you are 4034c609719bSwdenkworking with an in-memory copy. In case the Flash area containing the 4035c609719bSwdenkenvironment is erased by accident, a default environment is provided. 4036c609719bSwdenk 4037c96f86eeSWolfgang DenkSome configuration options can be set using Environment Variables. 4038c96f86eeSWolfgang Denk 4039c96f86eeSWolfgang DenkList of environment variables (most likely not complete): 4040c609719bSwdenk 4041c609719bSwdenk baudrate - see CONFIG_BAUDRATE 4042c609719bSwdenk 4043c609719bSwdenk bootdelay - see CONFIG_BOOTDELAY 4044c609719bSwdenk 4045c609719bSwdenk bootcmd - see CONFIG_BOOTCOMMAND 4046c609719bSwdenk 4047c609719bSwdenk bootargs - Boot arguments when booting an RTOS image 4048c609719bSwdenk 4049c609719bSwdenk bootfile - Name of the image to load with TFTP 4050c609719bSwdenk 40517d721e34SBartlomiej Sieka bootm_low - Memory range available for image processing in the bootm 40527d721e34SBartlomiej Sieka command can be restricted. This variable is given as 40537d721e34SBartlomiej Sieka a hexadecimal number and defines lowest address allowed 40547d721e34SBartlomiej Sieka for use by the bootm command. See also "bootm_size" 40557d721e34SBartlomiej Sieka environment variable. Address defined by "bootm_low" is 40567d721e34SBartlomiej Sieka also the base of the initial memory mapping for the Linux 4057c3624e6eSGrant Likely kernel -- see the description of CONFIG_SYS_BOOTMAPSZ and 4058c3624e6eSGrant Likely bootm_mapsize. 4059c3624e6eSGrant Likely 4060c3624e6eSGrant Likely bootm_mapsize - Size of the initial memory mapping for the Linux kernel. 4061c3624e6eSGrant Likely This variable is given as a hexadecimal number and it 4062c3624e6eSGrant Likely defines the size of the memory region starting at base 4063c3624e6eSGrant Likely address bootm_low that is accessible by the Linux kernel 4064c3624e6eSGrant Likely during early boot. If unset, CONFIG_SYS_BOOTMAPSZ is used 4065c3624e6eSGrant Likely as the default value if it is defined, and bootm_size is 4066c3624e6eSGrant Likely used otherwise. 40677d721e34SBartlomiej Sieka 40687d721e34SBartlomiej Sieka bootm_size - Memory range available for image processing in the bootm 40697d721e34SBartlomiej Sieka command can be restricted. This variable is given as 40707d721e34SBartlomiej Sieka a hexadecimal number and defines the size of the region 40717d721e34SBartlomiej Sieka allowed for use by the bootm command. See also "bootm_low" 40727d721e34SBartlomiej Sieka environment variable. 40737d721e34SBartlomiej Sieka 40744bae9090SBartlomiej Sieka updatefile - Location of the software update file on a TFTP server, used 40754bae9090SBartlomiej Sieka by the automatic software update feature. Please refer to 40764bae9090SBartlomiej Sieka documentation in doc/README.update for more details. 40774bae9090SBartlomiej Sieka 4078c609719bSwdenk autoload - if set to "no" (any string beginning with 'n'), 4079c609719bSwdenk "bootp" will just load perform a lookup of the 4080c609719bSwdenk configuration from the BOOTP server, but not try to 4081c609719bSwdenk load any image using TFTP 4082c609719bSwdenk 4083c609719bSwdenk autostart - if set to "yes", an image loaded using the "bootp", 4084c609719bSwdenk "rarpboot", "tftpboot" or "diskboot" commands will 4085c609719bSwdenk be automatically started (by internally calling 4086c609719bSwdenk "bootm") 4087c609719bSwdenk 40884a6fd34bSwdenk If set to "no", a standalone image passed to the 40894a6fd34bSwdenk "bootm" command will be copied to the load address 40904a6fd34bSwdenk (and eventually uncompressed), but NOT be started. 40914a6fd34bSwdenk This can be used to load and uncompress arbitrary 40924a6fd34bSwdenk data. 40934a6fd34bSwdenk 4094a28afca5SDavid A. Long fdt_high - if set this restricts the maximum address that the 4095a28afca5SDavid A. Long flattened device tree will be copied into upon boot. 4096fa34f6b2SShawn Guo For example, if you have a system with 1 GB memory 4097fa34f6b2SShawn Guo at physical address 0x10000000, while Linux kernel 4098fa34f6b2SShawn Guo only recognizes the first 704 MB as low memory, you 4099fa34f6b2SShawn Guo may need to set fdt_high as 0x3C000000 to have the 4100fa34f6b2SShawn Guo device tree blob be copied to the maximum address 4101fa34f6b2SShawn Guo of the 704 MB low memory, so that Linux kernel can 4102fa34f6b2SShawn Guo access it during the boot procedure. 4103fa34f6b2SShawn Guo 4104a28afca5SDavid A. Long If this is set to the special value 0xFFFFFFFF then 4105a28afca5SDavid A. Long the fdt will not be copied at all on boot. For this 4106a28afca5SDavid A. Long to work it must reside in writable memory, have 4107a28afca5SDavid A. Long sufficient padding on the end of it for u-boot to 4108a28afca5SDavid A. Long add the information it needs into it, and the memory 4109a28afca5SDavid A. Long must be accessible by the kernel. 4110a28afca5SDavid A. Long 4111eea63e05SSimon Glass fdtcontroladdr- if set this is the address of the control flattened 4112eea63e05SSimon Glass device tree used by U-Boot when CONFIG_OF_CONTROL is 4113eea63e05SSimon Glass defined. 4114eea63e05SSimon Glass 411517ea1177Swdenk i2cfast - (PPC405GP|PPC405EP only) 411617ea1177Swdenk if set to 'y' configures Linux I2C driver for fast 411717ea1177Swdenk mode (400kHZ). This environment variable is used in 411817ea1177Swdenk initialization code. So, for changes to be effective 411917ea1177Swdenk it must be saved and board must be reset. 412017ea1177Swdenk 4121c609719bSwdenk initrd_high - restrict positioning of initrd images: 4122c609719bSwdenk If this variable is not set, initrd images will be 4123c609719bSwdenk copied to the highest possible address in RAM; this 4124c609719bSwdenk is usually what you want since it allows for 4125c609719bSwdenk maximum initrd size. If for some reason you want to 4126c609719bSwdenk make sure that the initrd image is loaded below the 41276d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_BOOTMAPSZ limit, you can set this environment 4128c609719bSwdenk variable to a value of "no" or "off" or "0". 4129c609719bSwdenk Alternatively, you can set it to a maximum upper 4130c609719bSwdenk address to use (U-Boot will still check that it 4131c609719bSwdenk does not overwrite the U-Boot stack and data). 4132c609719bSwdenk 4133c609719bSwdenk For instance, when you have a system with 16 MB 41347152b1d0Swdenk RAM, and want to reserve 4 MB from use by Linux, 4135c609719bSwdenk you can do this by adding "mem=12M" to the value of 4136c609719bSwdenk the "bootargs" variable. However, now you must make 41377152b1d0Swdenk sure that the initrd image is placed in the first 4138c609719bSwdenk 12 MB as well - this can be done with 4139c609719bSwdenk 4140c609719bSwdenk setenv initrd_high 00c00000 4141c609719bSwdenk 414238b99261Swdenk If you set initrd_high to 0xFFFFFFFF, this is an 414338b99261Swdenk indication to U-Boot that all addresses are legal 414438b99261Swdenk for the Linux kernel, including addresses in flash 414538b99261Swdenk memory. In this case U-Boot will NOT COPY the 414638b99261Swdenk ramdisk at all. This may be useful to reduce the 414738b99261Swdenk boot time on your system, but requires that this 414838b99261Swdenk feature is supported by your Linux kernel. 414938b99261Swdenk 4150c609719bSwdenk ipaddr - IP address; needed for tftpboot command 4151c609719bSwdenk 4152c609719bSwdenk loadaddr - Default load address for commands like "bootp", 4153dc7c9a1aSwdenk "rarpboot", "tftpboot", "loadb" or "diskboot" 4154c609719bSwdenk 4155c609719bSwdenk loads_echo - see CONFIG_LOADS_ECHO 4156c609719bSwdenk 4157c609719bSwdenk serverip - TFTP server IP address; needed for tftpboot command 4158c609719bSwdenk 4159c609719bSwdenk bootretry - see CONFIG_BOOT_RETRY_TIME 4160c609719bSwdenk 4161c609719bSwdenk bootdelaykey - see CONFIG_AUTOBOOT_DELAY_STR 4162c609719bSwdenk 4163c609719bSwdenk bootstopkey - see CONFIG_AUTOBOOT_STOP_STR 4164c609719bSwdenk 4165e2a53458SMike Frysinger ethprime - controls which interface is used first. 4166a3d991bdSwdenk 4167e2a53458SMike Frysinger ethact - controls which interface is currently active. 4168e2a53458SMike Frysinger For example you can do the following 4169a3d991bdSwdenk 417048690d80SHeiko Schocher => setenv ethact FEC 417148690d80SHeiko Schocher => ping 192.168.0.1 # traffic sent on FEC 417248690d80SHeiko Schocher => setenv ethact SCC 417348690d80SHeiko Schocher => ping 10.0.0.1 # traffic sent on SCC 4174a3d991bdSwdenk 4175e1692577SMatthias Fuchs ethrotate - When set to "no" U-Boot does not go through all 4176e1692577SMatthias Fuchs available network interfaces. 4177e1692577SMatthias Fuchs It just stays at the currently selected interface. 4178e1692577SMatthias Fuchs 4179a3d991bdSwdenk netretry - When set to "no" each network operation will 4180a3d991bdSwdenk either succeed or fail without retrying. 41816e592385Swdenk When set to "once" the network operation will 41826e592385Swdenk fail when all the available network interfaces 41836e592385Swdenk are tried once without success. 4184a3d991bdSwdenk Useful on scripts which control the retry operation 4185a3d991bdSwdenk themselves. 4186a3d991bdSwdenk 4187b4e2f89dSJean-Christophe PLAGNIOL-VILLARD npe_ucode - set load address for the NPE microcode 4188a1cf027aSJean-Christophe PLAGNIOL-VILLARD 418928cb9375SWolfgang Denk tftpsrcport - If this is set, the value is used for TFTP's 4190ecb0ccd9SWolfgang Denk UDP source port. 4191ecb0ccd9SWolfgang Denk 419228cb9375SWolfgang Denk tftpdstport - If this is set, the value is used for TFTP's UDP 419328cb9375SWolfgang Denk destination port instead of the Well Know Port 69. 419428cb9375SWolfgang Denk 4195c96f86eeSWolfgang Denk tftpblocksize - Block size to use for TFTP transfers; if not set, 4196c96f86eeSWolfgang Denk we use the TFTP server's default block size 4197c96f86eeSWolfgang Denk 4198c96f86eeSWolfgang Denk tftptimeout - Retransmission timeout for TFTP packets (in milli- 4199c96f86eeSWolfgang Denk seconds, minimum value is 1000 = 1 second). Defines 4200c96f86eeSWolfgang Denk when a packet is considered to be lost so it has to 4201c96f86eeSWolfgang Denk be retransmitted. The default is 5000 = 5 seconds. 4202c96f86eeSWolfgang Denk Lowering this value may make downloads succeed 4203c96f86eeSWolfgang Denk faster in networks with high packet loss rates or 4204c96f86eeSWolfgang Denk with unreliable TFTP servers. 4205c96f86eeSWolfgang Denk 4206a3d991bdSwdenk vlan - When set to a value < 4095 the traffic over 420711ccc33fSMarcel Ziswiler Ethernet is encapsulated/received over 802.1q 4208a3d991bdSwdenk VLAN tagged frames. 4209c609719bSwdenk 4210dc0b7b0eSJason HobbsThe following image location variables contain the location of images 4211dc0b7b0eSJason Hobbsused in booting. The "Image" column gives the role of the image and is 4212dc0b7b0eSJason Hobbsnot an environment variable name. The other columns are environment 4213dc0b7b0eSJason Hobbsvariable names. "File Name" gives the name of the file on a TFTP 4214dc0b7b0eSJason Hobbsserver, "RAM Address" gives the location in RAM the image will be 4215dc0b7b0eSJason Hobbsloaded to, and "Flash Location" gives the image's address in NOR 4216dc0b7b0eSJason Hobbsflash or offset in NAND flash. 4217dc0b7b0eSJason Hobbs 4218dc0b7b0eSJason Hobbs*Note* - these variables don't have to be defined for all boards, some 4219dc0b7b0eSJason Hobbsboards currenlty use other variables for these purposes, and some 4220dc0b7b0eSJason Hobbsboards use these variables for other purposes. 4221dc0b7b0eSJason Hobbs 4222dc0b7b0eSJason HobbsImage File Name RAM Address Flash Location 4223dc0b7b0eSJason Hobbs----- --------- ----------- -------------- 4224dc0b7b0eSJason Hobbsu-boot u-boot u-boot_addr_r u-boot_addr 4225dc0b7b0eSJason HobbsLinux kernel bootfile kernel_addr_r kernel_addr 4226dc0b7b0eSJason Hobbsdevice tree blob fdtfile fdt_addr_r fdt_addr 4227dc0b7b0eSJason Hobbsramdisk ramdiskfile ramdisk_addr_r ramdisk_addr 4228dc0b7b0eSJason Hobbs 4229c609719bSwdenkThe following environment variables may be used and automatically 4230c609719bSwdenkupdated by the network boot commands ("bootp" and "rarpboot"), 4231c609719bSwdenkdepending the information provided by your boot server: 4232c609719bSwdenk 4233c609719bSwdenk bootfile - see above 4234c609719bSwdenk dnsip - IP address of your Domain Name Server 4235fe389a82Sstroese dnsip2 - IP address of your secondary Domain Name Server 4236c609719bSwdenk gatewayip - IP address of the Gateway (Router) to use 4237c609719bSwdenk hostname - Target hostname 4238c609719bSwdenk ipaddr - see above 4239c609719bSwdenk netmask - Subnet Mask 4240c609719bSwdenk rootpath - Pathname of the root filesystem on the NFS server 4241c609719bSwdenk serverip - see above 4242c609719bSwdenk 4243c609719bSwdenk 4244c609719bSwdenkThere are two special Environment Variables: 4245c609719bSwdenk 4246c609719bSwdenk serial# - contains hardware identification information such 4247c609719bSwdenk as type string and/or serial number 4248c609719bSwdenk ethaddr - Ethernet address 4249c609719bSwdenk 4250c609719bSwdenkThese variables can be set only once (usually during manufacturing of 4251c609719bSwdenkthe board). U-Boot refuses to delete or overwrite these variables 4252c609719bSwdenkonce they have been set once. 4253c609719bSwdenk 4254c609719bSwdenk 4255c1551ea8SstroeseFurther special Environment Variables: 4256c1551ea8Sstroese 4257c1551ea8Sstroese ver - Contains the U-Boot version string as printed 4258c1551ea8Sstroese with the "version" command. This variable is 4259c1551ea8Sstroese readonly (see CONFIG_VERSION_VARIABLE). 4260c1551ea8Sstroese 4261c1551ea8Sstroese 4262c609719bSwdenkPlease note that changes to some configuration parameters may take 4263c609719bSwdenkonly effect after the next boot (yes, that's just like Windoze :-). 4264c609719bSwdenk 4265c609719bSwdenk 4266170ab110SJoe HershbergerCallback functions for environment variables: 4267170ab110SJoe Hershberger--------------------------------------------- 4268170ab110SJoe Hershberger 4269170ab110SJoe HershbergerFor some environment variables, the behavior of u-boot needs to change 4270170ab110SJoe Hershbergerwhen their values are changed. This functionailty allows functions to 4271170ab110SJoe Hershbergerbe associated with arbitrary variables. On creation, overwrite, or 4272170ab110SJoe Hershbergerdeletion, the callback will provide the opportunity for some side 4273170ab110SJoe Hershbergereffect to happen or for the change to be rejected. 4274170ab110SJoe Hershberger 4275170ab110SJoe HershbergerThe callbacks are named and associated with a function using the 4276170ab110SJoe HershbergerU_BOOT_ENV_CALLBACK macro in your board or driver code. 4277170ab110SJoe Hershberger 4278170ab110SJoe HershbergerThese callbacks are associated with variables in one of two ways. The 4279170ab110SJoe Hershbergerstatic list can be added to by defining CONFIG_ENV_CALLBACK_LIST_STATIC 4280170ab110SJoe Hershbergerin the board configuration to a string that defines a list of 4281170ab110SJoe Hershbergerassociations. The list must be in the following format: 4282170ab110SJoe Hershberger 4283170ab110SJoe Hershberger entry = variable_name[:callback_name] 4284170ab110SJoe Hershberger list = entry[,list] 4285170ab110SJoe Hershberger 4286170ab110SJoe HershbergerIf the callback name is not specified, then the callback is deleted. 4287170ab110SJoe HershbergerSpaces are also allowed anywhere in the list. 4288170ab110SJoe Hershberger 4289170ab110SJoe HershbergerCallbacks can also be associated by defining the ".callbacks" variable 4290170ab110SJoe Hershbergerwith the same list format above. Any association in ".callbacks" will 4291170ab110SJoe Hershbergeroverride any association in the static list. You can define 4292170ab110SJoe HershbergerCONFIG_ENV_CALLBACK_LIST_DEFAULT to a list (string) to define the 4293170ab110SJoe Hershberger".callbacks" envirnoment variable in the default or embedded environment. 4294170ab110SJoe Hershberger 4295170ab110SJoe Hershberger 4296f07771ccSwdenkCommand Line Parsing: 4297f07771ccSwdenk===================== 4298f07771ccSwdenk 4299f07771ccSwdenkThere are two different command line parsers available with U-Boot: 43007152b1d0Swdenkthe old "simple" one, and the much more powerful "hush" shell: 4301f07771ccSwdenk 4302f07771ccSwdenkOld, simple command line parser: 4303f07771ccSwdenk-------------------------------- 4304f07771ccSwdenk 4305f07771ccSwdenk- supports environment variables (through setenv / saveenv commands) 4306f07771ccSwdenk- several commands on one line, separated by ';' 4307fe126d8bSWolfgang Denk- variable substitution using "... ${name} ..." syntax 4308f07771ccSwdenk- special characters ('$', ';') can be escaped by prefixing with '\', 4309f07771ccSwdenk for example: 4310fe126d8bSWolfgang Denk setenv bootcmd bootm \${address} 4311f07771ccSwdenk- You can also escape text by enclosing in single apostrophes, for example: 4312f07771ccSwdenk setenv addip 'setenv bootargs $bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off' 4313f07771ccSwdenk 4314f07771ccSwdenkHush shell: 4315f07771ccSwdenk----------- 4316f07771ccSwdenk 4317f07771ccSwdenk- similar to Bourne shell, with control structures like 4318f07771ccSwdenk if...then...else...fi, for...do...done; while...do...done, 4319f07771ccSwdenk until...do...done, ... 4320f07771ccSwdenk- supports environment ("global") variables (through setenv / saveenv 4321f07771ccSwdenk commands) and local shell variables (through standard shell syntax 4322f07771ccSwdenk "name=value"); only environment variables can be used with "run" 4323f07771ccSwdenk command 4324f07771ccSwdenk 4325f07771ccSwdenkGeneral rules: 4326f07771ccSwdenk-------------- 4327f07771ccSwdenk 4328f07771ccSwdenk(1) If a command line (or an environment variable executed by a "run" 4329f07771ccSwdenk command) contains several commands separated by semicolon, and 4330f07771ccSwdenk one of these commands fails, then the remaining commands will be 4331f07771ccSwdenk executed anyway. 4332f07771ccSwdenk 4333f07771ccSwdenk(2) If you execute several variables with one call to run (i. e. 433411ccc33fSMarcel Ziswiler calling run with a list of variables as arguments), any failing 4335f07771ccSwdenk command will cause "run" to terminate, i. e. the remaining 4336f07771ccSwdenk variables are not executed. 4337f07771ccSwdenk 4338c609719bSwdenkNote for Redundant Ethernet Interfaces: 4339c609719bSwdenk======================================= 4340c609719bSwdenk 434111ccc33fSMarcel ZiswilerSome boards come with redundant Ethernet interfaces; U-Boot supports 4342c609719bSwdenksuch configurations and is capable of automatic selection of a 43437152b1d0Swdenk"working" interface when needed. MAC assignment works as follows: 4344c609719bSwdenk 4345c609719bSwdenkNetwork interfaces are numbered eth0, eth1, eth2, ... Corresponding 4346c609719bSwdenkMAC addresses can be stored in the environment as "ethaddr" (=>eth0), 4347c609719bSwdenk"eth1addr" (=>eth1), "eth2addr", ... 4348c609719bSwdenk 4349c609719bSwdenkIf the network interface stores some valid MAC address (for instance 4350c609719bSwdenkin SROM), this is used as default address if there is NO correspon- 4351c609719bSwdenkding setting in the environment; if the corresponding environment 4352c609719bSwdenkvariable is set, this overrides the settings in the card; that means: 4353c609719bSwdenk 4354c609719bSwdenko If the SROM has a valid MAC address, and there is no address in the 4355c609719bSwdenk environment, the SROM's address is used. 4356c609719bSwdenk 4357c609719bSwdenko If there is no valid address in the SROM, and a definition in the 4358c609719bSwdenk environment exists, then the value from the environment variable is 4359c609719bSwdenk used. 4360c609719bSwdenk 4361c609719bSwdenko If both the SROM and the environment contain a MAC address, and 4362c609719bSwdenk both addresses are the same, this MAC address is used. 4363c609719bSwdenk 4364c609719bSwdenko If both the SROM and the environment contain a MAC address, and the 4365c609719bSwdenk addresses differ, the value from the environment is used and a 4366c609719bSwdenk warning is printed. 4367c609719bSwdenk 4368c609719bSwdenko If neither SROM nor the environment contain a MAC address, an error 4369c609719bSwdenk is raised. 4370c609719bSwdenk 4371ecee9324SBen WarrenIf Ethernet drivers implement the 'write_hwaddr' function, valid MAC addresses 4372ecee9324SBen Warrenwill be programmed into hardware as part of the initialization process. This 4373ecee9324SBen Warrenmay be skipped by setting the appropriate 'ethmacskip' environment variable. 4374ecee9324SBen WarrenThe naming convention is as follows: 4375ecee9324SBen Warren"ethmacskip" (=>eth0), "eth1macskip" (=>eth1) etc. 4376c609719bSwdenk 4377c609719bSwdenkImage Formats: 4378c609719bSwdenk============== 4379c609719bSwdenk 43803310c549SMarian BalakowiczU-Boot is capable of booting (and performing other auxiliary operations on) 43813310c549SMarian Balakowiczimages in two formats: 43823310c549SMarian Balakowicz 43833310c549SMarian BalakowiczNew uImage format (FIT) 43843310c549SMarian Balakowicz----------------------- 43853310c549SMarian Balakowicz 43863310c549SMarian BalakowiczFlexible and powerful format based on Flattened Image Tree -- FIT (similar 43873310c549SMarian Balakowiczto Flattened Device Tree). It allows the use of images with multiple 43883310c549SMarian Balakowiczcomponents (several kernels, ramdisks, etc.), with contents protected by 43893310c549SMarian BalakowiczSHA1, MD5 or CRC32. More details are found in the doc/uImage.FIT directory. 43903310c549SMarian Balakowicz 43913310c549SMarian Balakowicz 43923310c549SMarian BalakowiczOld uImage format 43933310c549SMarian Balakowicz----------------- 43943310c549SMarian Balakowicz 43953310c549SMarian BalakowiczOld image format is based on binary files which can be basically anything, 43963310c549SMarian Balakowiczpreceded by a special header; see the definitions in include/image.h for 43973310c549SMarian Balakowiczdetails; basically, the header defines the following image properties: 4398c609719bSwdenk 4399c609719bSwdenk* Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD, 4400c609719bSwdenk 4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks, 4401f5ed9e39SPeter Tyser LynxOS, pSOS, QNX, RTEMS, INTEGRITY; 4402f5ed9e39SPeter Tyser Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS, 4403f5ed9e39SPeter Tyser INTEGRITY). 44047b64fef3SWolfgang Denk* Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86, 4405afc1ce82SMacpaul Lin IA64, MIPS, NDS32, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit; 4406afc1ce82SMacpaul Lin Currently supported: ARM, AVR32, Intel x86, MIPS, NDS32, Nios II, PowerPC). 4407c29fdfc1Swdenk* Compression Type (uncompressed, gzip, bzip2) 4408c609719bSwdenk* Load Address 4409c609719bSwdenk* Entry Point 4410c609719bSwdenk* Image Name 4411c609719bSwdenk* Image Timestamp 4412c609719bSwdenk 4413c609719bSwdenkThe header is marked by a special Magic Number, and both the header 4414c609719bSwdenkand the data portions of the image are secured against corruption by 4415c609719bSwdenkCRC32 checksums. 4416c609719bSwdenk 4417c609719bSwdenk 4418c609719bSwdenkLinux Support: 4419c609719bSwdenk============== 4420c609719bSwdenk 4421c609719bSwdenkAlthough U-Boot should support any OS or standalone application 44227152b1d0Swdenkeasily, the main focus has always been on Linux during the design of 4423c609719bSwdenkU-Boot. 4424c609719bSwdenk 4425c609719bSwdenkU-Boot includes many features that so far have been part of some 4426c609719bSwdenkspecial "boot loader" code within the Linux kernel. Also, any 4427c609719bSwdenk"initrd" images to be used are no longer part of one big Linux image; 4428c609719bSwdenkinstead, kernel and "initrd" are separate images. This implementation 44297152b1d0Swdenkserves several purposes: 4430c609719bSwdenk 4431c609719bSwdenk- the same features can be used for other OS or standalone 4432c609719bSwdenk applications (for instance: using compressed images to reduce the 4433c609719bSwdenk Flash memory footprint) 4434c609719bSwdenk 4435c609719bSwdenk- it becomes much easier to port new Linux kernel versions because 44367152b1d0Swdenk lots of low-level, hardware dependent stuff are done by U-Boot 4437c609719bSwdenk 4438c609719bSwdenk- the same Linux kernel image can now be used with different "initrd" 4439c609719bSwdenk images; of course this also means that different kernel images can 4440c609719bSwdenk be run with the same "initrd". This makes testing easier (you don't 4441c609719bSwdenk have to build a new "zImage.initrd" Linux image when you just 4442c609719bSwdenk change a file in your "initrd"). Also, a field-upgrade of the 4443c609719bSwdenk software is easier now. 4444c609719bSwdenk 4445c609719bSwdenk 4446c609719bSwdenkLinux HOWTO: 4447c609719bSwdenk============ 4448c609719bSwdenk 4449c609719bSwdenkPorting Linux to U-Boot based systems: 4450c609719bSwdenk--------------------------------------- 4451c609719bSwdenk 4452c609719bSwdenkU-Boot cannot save you from doing all the necessary modifications to 4453c609719bSwdenkconfigure the Linux device drivers for use with your target hardware 4454c609719bSwdenk(no, we don't intend to provide a full virtual machine interface to 4455c609719bSwdenkLinux :-). 4456c609719bSwdenk 4457a47a12beSStefan RoeseBut now you can ignore ALL boot loader code (in arch/powerpc/mbxboot). 4458c609719bSwdenk 4459c609719bSwdenkJust make sure your machine specific header file (for instance 4460c609719bSwdenkinclude/asm-ppc/tqm8xx.h) includes the same definition of the Board 44611dc30693SMarkus HeidelbergInformation structure as we define in include/asm-<arch>/u-boot.h, 44621dc30693SMarkus Heidelbergand make sure that your definition of IMAP_ADDR uses the same value 44636d0f6bcfSJean-Christophe PLAGNIOL-VILLARDas your U-Boot configuration in CONFIG_SYS_IMMR. 4464c609719bSwdenk 4465c609719bSwdenk 4466c609719bSwdenkConfiguring the Linux kernel: 4467c609719bSwdenk----------------------------- 4468c609719bSwdenk 4469c609719bSwdenkNo specific requirements for U-Boot. Make sure you have some root 4470c609719bSwdenkdevice (initial ramdisk, NFS) for your target system. 4471c609719bSwdenk 4472c609719bSwdenk 4473c609719bSwdenkBuilding a Linux Image: 4474c609719bSwdenk----------------------- 4475c609719bSwdenk 447624ee89b9SwdenkWith U-Boot, "normal" build targets like "zImage" or "bzImage" are 447724ee89b9Swdenknot used. If you use recent kernel source, a new build target 447824ee89b9Swdenk"uImage" will exist which automatically builds an image usable by 447924ee89b9SwdenkU-Boot. Most older kernels also have support for a "pImage" target, 448024ee89b9Swdenkwhich was introduced for our predecessor project PPCBoot and uses a 448124ee89b9Swdenk100% compatible format. 4482c609719bSwdenk 4483c609719bSwdenkExample: 4484c609719bSwdenk 4485c609719bSwdenk make TQM850L_config 4486c609719bSwdenk make oldconfig 4487c609719bSwdenk make dep 448824ee89b9Swdenk make uImage 4489c609719bSwdenk 449024ee89b9SwdenkThe "uImage" build target uses a special tool (in 'tools/mkimage') to 449124ee89b9Swdenkencapsulate a compressed Linux kernel image with header information, 449224ee89b9SwdenkCRC32 checksum etc. for use with U-Boot. This is what we are doing: 4493c609719bSwdenk 449424ee89b9Swdenk* build a standard "vmlinux" kernel image (in ELF binary format): 449524ee89b9Swdenk 449624ee89b9Swdenk* convert the kernel into a raw binary image: 449724ee89b9Swdenk 449824ee89b9Swdenk ${CROSS_COMPILE}-objcopy -O binary \ 449924ee89b9Swdenk -R .note -R .comment \ 450024ee89b9Swdenk -S vmlinux linux.bin 450124ee89b9Swdenk 450224ee89b9Swdenk* compress the binary image: 450324ee89b9Swdenk 450424ee89b9Swdenk gzip -9 linux.bin 450524ee89b9Swdenk 450624ee89b9Swdenk* package compressed binary image for U-Boot: 450724ee89b9Swdenk 450824ee89b9Swdenk mkimage -A ppc -O linux -T kernel -C gzip \ 450924ee89b9Swdenk -a 0 -e 0 -n "Linux Kernel Image" \ 451024ee89b9Swdenk -d linux.bin.gz uImage 451124ee89b9Swdenk 451224ee89b9Swdenk 451324ee89b9SwdenkThe "mkimage" tool can also be used to create ramdisk images for use 451424ee89b9Swdenkwith U-Boot, either separated from the Linux kernel image, or 451524ee89b9Swdenkcombined into one file. "mkimage" encapsulates the images with a 64 451624ee89b9Swdenkbyte header containing information about target architecture, 451724ee89b9Swdenkoperating system, image type, compression method, entry points, time 451824ee89b9Swdenkstamp, CRC32 checksums, etc. 451924ee89b9Swdenk 452024ee89b9Swdenk"mkimage" can be called in two ways: to verify existing images and 452124ee89b9Swdenkprint the header information, or to build new images. 4522c609719bSwdenk 4523c609719bSwdenkIn the first form (with "-l" option) mkimage lists the information 4524c609719bSwdenkcontained in the header of an existing U-Boot image; this includes 4525c609719bSwdenkchecksum verification: 4526c609719bSwdenk 4527c609719bSwdenk tools/mkimage -l image 4528c609719bSwdenk -l ==> list image header information 4529c609719bSwdenk 4530c609719bSwdenkThe second form (with "-d" option) is used to build a U-Boot image 4531c609719bSwdenkfrom a "data file" which is used as image payload: 4532c609719bSwdenk 4533c609719bSwdenk tools/mkimage -A arch -O os -T type -C comp -a addr -e ep \ 4534c609719bSwdenk -n name -d data_file image 4535c609719bSwdenk -A ==> set architecture to 'arch' 4536c609719bSwdenk -O ==> set operating system to 'os' 4537c609719bSwdenk -T ==> set image type to 'type' 4538c609719bSwdenk -C ==> set compression type 'comp' 4539c609719bSwdenk -a ==> set load address to 'addr' (hex) 4540c609719bSwdenk -e ==> set entry point to 'ep' (hex) 4541c609719bSwdenk -n ==> set image name to 'name' 4542c609719bSwdenk -d ==> use image data from 'datafile' 4543c609719bSwdenk 454469459791SwdenkRight now, all Linux kernels for PowerPC systems use the same load 454569459791Swdenkaddress (0x00000000), but the entry point address depends on the 454669459791Swdenkkernel version: 4547c609719bSwdenk 4548c609719bSwdenk- 2.2.x kernels have the entry point at 0x0000000C, 454924ee89b9Swdenk- 2.3.x and later kernels have the entry point at 0x00000000. 4550c609719bSwdenk 4551c609719bSwdenkSo a typical call to build a U-Boot image would read: 4552c609719bSwdenk 455324ee89b9Swdenk -> tools/mkimage -n '2.4.4 kernel for TQM850L' \ 455424ee89b9Swdenk > -A ppc -O linux -T kernel -C gzip -a 0 -e 0 \ 4555a47a12beSStefan Roese > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz \ 455624ee89b9Swdenk > examples/uImage.TQM850L 455724ee89b9Swdenk Image Name: 2.4.4 kernel for TQM850L 4558c609719bSwdenk Created: Wed Jul 19 02:34:59 2000 4559c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 4560c609719bSwdenk Data Size: 335725 Bytes = 327.86 kB = 0.32 MB 4561c609719bSwdenk Load Address: 0x00000000 456224ee89b9Swdenk Entry Point: 0x00000000 4563c609719bSwdenk 4564c609719bSwdenkTo verify the contents of the image (or check for corruption): 4565c609719bSwdenk 456624ee89b9Swdenk -> tools/mkimage -l examples/uImage.TQM850L 456724ee89b9Swdenk Image Name: 2.4.4 kernel for TQM850L 4568c609719bSwdenk Created: Wed Jul 19 02:34:59 2000 4569c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 4570c609719bSwdenk Data Size: 335725 Bytes = 327.86 kB = 0.32 MB 4571c609719bSwdenk Load Address: 0x00000000 457224ee89b9Swdenk Entry Point: 0x00000000 4573c609719bSwdenk 4574c609719bSwdenkNOTE: for embedded systems where boot time is critical you can trade 4575c609719bSwdenkspeed for memory and install an UNCOMPRESSED image instead: this 4576c609719bSwdenkneeds more space in Flash, but boots much faster since it does not 4577c609719bSwdenkneed to be uncompressed: 4578c609719bSwdenk 4579a47a12beSStefan Roese -> gunzip /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz 458024ee89b9Swdenk -> tools/mkimage -n '2.4.4 kernel for TQM850L' \ 458124ee89b9Swdenk > -A ppc -O linux -T kernel -C none -a 0 -e 0 \ 4582a47a12beSStefan Roese > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux \ 458324ee89b9Swdenk > examples/uImage.TQM850L-uncompressed 458424ee89b9Swdenk Image Name: 2.4.4 kernel for TQM850L 4585c609719bSwdenk Created: Wed Jul 19 02:34:59 2000 4586c609719bSwdenk Image Type: PowerPC Linux Kernel Image (uncompressed) 4587c609719bSwdenk Data Size: 792160 Bytes = 773.59 kB = 0.76 MB 4588c609719bSwdenk Load Address: 0x00000000 458924ee89b9Swdenk Entry Point: 0x00000000 4590c609719bSwdenk 4591c609719bSwdenk 4592c609719bSwdenkSimilar you can build U-Boot images from a 'ramdisk.image.gz' file 4593c609719bSwdenkwhen your kernel is intended to use an initial ramdisk: 4594c609719bSwdenk 4595c609719bSwdenk -> tools/mkimage -n 'Simple Ramdisk Image' \ 4596c609719bSwdenk > -A ppc -O linux -T ramdisk -C gzip \ 4597c609719bSwdenk > -d /LinuxPPC/images/SIMPLE-ramdisk.image.gz examples/simple-initrd 4598c609719bSwdenk Image Name: Simple Ramdisk Image 4599c609719bSwdenk Created: Wed Jan 12 14:01:50 2000 4600c609719bSwdenk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) 4601c609719bSwdenk Data Size: 566530 Bytes = 553.25 kB = 0.54 MB 4602c609719bSwdenk Load Address: 0x00000000 4603c609719bSwdenk Entry Point: 0x00000000 4604c609719bSwdenk 4605c609719bSwdenk 4606c609719bSwdenkInstalling a Linux Image: 4607c609719bSwdenk------------------------- 4608c609719bSwdenk 4609c609719bSwdenkTo downloading a U-Boot image over the serial (console) interface, 4610c609719bSwdenkyou must convert the image to S-Record format: 4611c609719bSwdenk 4612c609719bSwdenk objcopy -I binary -O srec examples/image examples/image.srec 4613c609719bSwdenk 4614c609719bSwdenkThe 'objcopy' does not understand the information in the U-Boot 4615c609719bSwdenkimage header, so the resulting S-Record file will be relative to 4616c609719bSwdenkaddress 0x00000000. To load it to a given address, you need to 4617c609719bSwdenkspecify the target address as 'offset' parameter with the 'loads' 4618c609719bSwdenkcommand. 4619c609719bSwdenk 4620c609719bSwdenkExample: install the image to address 0x40100000 (which on the 4621c609719bSwdenkTQM8xxL is in the first Flash bank): 4622c609719bSwdenk 4623c609719bSwdenk => erase 40100000 401FFFFF 4624c609719bSwdenk 4625c609719bSwdenk .......... done 4626c609719bSwdenk Erased 8 sectors 4627c609719bSwdenk 4628c609719bSwdenk => loads 40100000 4629c609719bSwdenk ## Ready for S-Record download ... 4630c609719bSwdenk ~>examples/image.srec 4631c609719bSwdenk 1 2 3 4 5 6 7 8 9 10 11 12 13 ... 4632c609719bSwdenk ... 4633c609719bSwdenk 15989 15990 15991 15992 4634c609719bSwdenk [file transfer complete] 4635c609719bSwdenk [connected] 4636c609719bSwdenk ## Start Addr = 0x00000000 4637c609719bSwdenk 4638c609719bSwdenk 4639c609719bSwdenkYou can check the success of the download using the 'iminfo' command; 4640c609719bSwdenkthis includes a checksum verification so you can be sure no data 4641c609719bSwdenkcorruption happened: 4642c609719bSwdenk 4643c609719bSwdenk => imi 40100000 4644c609719bSwdenk 4645c609719bSwdenk ## Checking Image at 40100000 ... 4646c609719bSwdenk Image Name: 2.2.13 for initrd on TQM850L 4647c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 4648c609719bSwdenk Data Size: 335725 Bytes = 327 kB = 0 MB 4649c609719bSwdenk Load Address: 00000000 4650c609719bSwdenk Entry Point: 0000000c 4651c609719bSwdenk Verifying Checksum ... OK 4652c609719bSwdenk 4653c609719bSwdenk 4654c609719bSwdenkBoot Linux: 4655c609719bSwdenk----------- 4656c609719bSwdenk 4657c609719bSwdenkThe "bootm" command is used to boot an application that is stored in 4658c609719bSwdenkmemory (RAM or Flash). In case of a Linux kernel image, the contents 4659c609719bSwdenkof the "bootargs" environment variable is passed to the kernel as 4660c609719bSwdenkparameters. You can check and modify this variable using the 4661c609719bSwdenk"printenv" and "setenv" commands: 4662c609719bSwdenk 4663c609719bSwdenk 4664c609719bSwdenk => printenv bootargs 4665c609719bSwdenk bootargs=root=/dev/ram 4666c609719bSwdenk 4667c609719bSwdenk => setenv bootargs root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 4668c609719bSwdenk 4669c609719bSwdenk => printenv bootargs 4670c609719bSwdenk bootargs=root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 4671c609719bSwdenk 4672c609719bSwdenk => bootm 40020000 4673c609719bSwdenk ## Booting Linux kernel at 40020000 ... 4674c609719bSwdenk Image Name: 2.2.13 for NFS on TQM850L 4675c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 4676c609719bSwdenk Data Size: 381681 Bytes = 372 kB = 0 MB 4677c609719bSwdenk Load Address: 00000000 4678c609719bSwdenk Entry Point: 0000000c 4679c609719bSwdenk Verifying Checksum ... OK 4680c609719bSwdenk Uncompressing Kernel Image ... OK 4681c609719bSwdenk Linux version 2.2.13 (wd@denx.local.net) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 19 02:35:17 MEST 2000 4682c609719bSwdenk Boot arguments: root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 4683c609719bSwdenk time_init: decrementer frequency = 187500000/60 4684c609719bSwdenk Calibrating delay loop... 49.77 BogoMIPS 4685c609719bSwdenk Memory: 15208k available (700k kernel code, 444k data, 32k init) [c0000000,c1000000] 4686c609719bSwdenk ... 4687c609719bSwdenk 468811ccc33fSMarcel ZiswilerIf you want to boot a Linux kernel with initial RAM disk, you pass 46897152b1d0Swdenkthe memory addresses of both the kernel and the initrd image (PPBCOOT 4690c609719bSwdenkformat!) to the "bootm" command: 4691c609719bSwdenk 4692c609719bSwdenk => imi 40100000 40200000 4693c609719bSwdenk 4694c609719bSwdenk ## Checking Image at 40100000 ... 4695c609719bSwdenk Image Name: 2.2.13 for initrd on TQM850L 4696c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 4697c609719bSwdenk Data Size: 335725 Bytes = 327 kB = 0 MB 4698c609719bSwdenk Load Address: 00000000 4699c609719bSwdenk Entry Point: 0000000c 4700c609719bSwdenk Verifying Checksum ... OK 4701c609719bSwdenk 4702c609719bSwdenk ## Checking Image at 40200000 ... 4703c609719bSwdenk Image Name: Simple Ramdisk Image 4704c609719bSwdenk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) 4705c609719bSwdenk Data Size: 566530 Bytes = 553 kB = 0 MB 4706c609719bSwdenk Load Address: 00000000 4707c609719bSwdenk Entry Point: 00000000 4708c609719bSwdenk Verifying Checksum ... OK 4709c609719bSwdenk 4710c609719bSwdenk => bootm 40100000 40200000 4711c609719bSwdenk ## Booting Linux kernel at 40100000 ... 4712c609719bSwdenk Image Name: 2.2.13 for initrd on TQM850L 4713c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 4714c609719bSwdenk Data Size: 335725 Bytes = 327 kB = 0 MB 4715c609719bSwdenk Load Address: 00000000 4716c609719bSwdenk Entry Point: 0000000c 4717c609719bSwdenk Verifying Checksum ... OK 4718c609719bSwdenk Uncompressing Kernel Image ... OK 4719c609719bSwdenk ## Loading RAMDisk Image at 40200000 ... 4720c609719bSwdenk Image Name: Simple Ramdisk Image 4721c609719bSwdenk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) 4722c609719bSwdenk Data Size: 566530 Bytes = 553 kB = 0 MB 4723c609719bSwdenk Load Address: 00000000 4724c609719bSwdenk Entry Point: 00000000 4725c609719bSwdenk Verifying Checksum ... OK 4726c609719bSwdenk Loading Ramdisk ... OK 4727c609719bSwdenk Linux version 2.2.13 (wd@denx.local.net) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 19 02:32:08 MEST 2000 4728c609719bSwdenk Boot arguments: root=/dev/ram 4729c609719bSwdenk time_init: decrementer frequency = 187500000/60 4730c609719bSwdenk Calibrating delay loop... 49.77 BogoMIPS 4731c609719bSwdenk ... 4732c609719bSwdenk RAMDISK: Compressed image found at block 0 4733c609719bSwdenk VFS: Mounted root (ext2 filesystem). 4734c609719bSwdenk 4735c609719bSwdenk bash# 4736c609719bSwdenk 47370267768eSMatthew McClintockBoot Linux and pass a flat device tree: 47380267768eSMatthew McClintock----------- 47390267768eSMatthew McClintock 47400267768eSMatthew McClintockFirst, U-Boot must be compiled with the appropriate defines. See the section 47410267768eSMatthew McClintocktitled "Linux Kernel Interface" above for a more in depth explanation. The 47420267768eSMatthew McClintockfollowing is an example of how to start a kernel and pass an updated 47430267768eSMatthew McClintockflat device tree: 47440267768eSMatthew McClintock 47450267768eSMatthew McClintock=> print oftaddr 47460267768eSMatthew McClintockoftaddr=0x300000 47470267768eSMatthew McClintock=> print oft 47480267768eSMatthew McClintockoft=oftrees/mpc8540ads.dtb 47490267768eSMatthew McClintock=> tftp $oftaddr $oft 47500267768eSMatthew McClintockSpeed: 1000, full duplex 47510267768eSMatthew McClintockUsing TSEC0 device 47520267768eSMatthew McClintockTFTP from server 192.168.1.1; our IP address is 192.168.1.101 47530267768eSMatthew McClintockFilename 'oftrees/mpc8540ads.dtb'. 47540267768eSMatthew McClintockLoad address: 0x300000 47550267768eSMatthew McClintockLoading: # 47560267768eSMatthew McClintockdone 47570267768eSMatthew McClintockBytes transferred = 4106 (100a hex) 47580267768eSMatthew McClintock=> tftp $loadaddr $bootfile 47590267768eSMatthew McClintockSpeed: 1000, full duplex 47600267768eSMatthew McClintockUsing TSEC0 device 47610267768eSMatthew McClintockTFTP from server 192.168.1.1; our IP address is 192.168.1.2 47620267768eSMatthew McClintockFilename 'uImage'. 47630267768eSMatthew McClintockLoad address: 0x200000 47640267768eSMatthew McClintockLoading:############ 47650267768eSMatthew McClintockdone 47660267768eSMatthew McClintockBytes transferred = 1029407 (fb51f hex) 47670267768eSMatthew McClintock=> print loadaddr 47680267768eSMatthew McClintockloadaddr=200000 47690267768eSMatthew McClintock=> print oftaddr 47700267768eSMatthew McClintockoftaddr=0x300000 47710267768eSMatthew McClintock=> bootm $loadaddr - $oftaddr 47720267768eSMatthew McClintock## Booting image at 00200000 ... 47730267768eSMatthew McClintock Image Name: Linux-2.6.17-dirty 47740267768eSMatthew McClintock Image Type: PowerPC Linux Kernel Image (gzip compressed) 47750267768eSMatthew McClintock Data Size: 1029343 Bytes = 1005.2 kB 47760267768eSMatthew McClintock Load Address: 00000000 47770267768eSMatthew McClintock Entry Point: 00000000 47780267768eSMatthew McClintock Verifying Checksum ... OK 47790267768eSMatthew McClintock Uncompressing Kernel Image ... OK 47800267768eSMatthew McClintockBooting using flat device tree at 0x300000 47810267768eSMatthew McClintockUsing MPC85xx ADS machine description 47820267768eSMatthew McClintockMemory CAM mapping: CAM0=256Mb, CAM1=256Mb, CAM2=0Mb residual: 0Mb 47830267768eSMatthew McClintock[snip] 47840267768eSMatthew McClintock 47850267768eSMatthew McClintock 47866069ff26SwdenkMore About U-Boot Image Types: 47876069ff26Swdenk------------------------------ 47886069ff26Swdenk 47896069ff26SwdenkU-Boot supports the following image types: 47906069ff26Swdenk 47916069ff26Swdenk "Standalone Programs" are directly runnable in the environment 47926069ff26Swdenk provided by U-Boot; it is expected that (if they behave 47936069ff26Swdenk well) you can continue to work in U-Boot after return from 47946069ff26Swdenk the Standalone Program. 47956069ff26Swdenk "OS Kernel Images" are usually images of some Embedded OS which 47966069ff26Swdenk will take over control completely. Usually these programs 47976069ff26Swdenk will install their own set of exception handlers, device 47986069ff26Swdenk drivers, set up the MMU, etc. - this means, that you cannot 47996069ff26Swdenk expect to re-enter U-Boot except by resetting the CPU. 48006069ff26Swdenk "RAMDisk Images" are more or less just data blocks, and their 48016069ff26Swdenk parameters (address, size) are passed to an OS kernel that is 48026069ff26Swdenk being started. 48036069ff26Swdenk "Multi-File Images" contain several images, typically an OS 48046069ff26Swdenk (Linux) kernel image and one or more data images like 48056069ff26Swdenk RAMDisks. This construct is useful for instance when you want 48066069ff26Swdenk to boot over the network using BOOTP etc., where the boot 48076069ff26Swdenk server provides just a single image file, but you want to get 48086069ff26Swdenk for instance an OS kernel and a RAMDisk image. 48096069ff26Swdenk 48106069ff26Swdenk "Multi-File Images" start with a list of image sizes, each 48116069ff26Swdenk image size (in bytes) specified by an "uint32_t" in network 48126069ff26Swdenk byte order. This list is terminated by an "(uint32_t)0". 48136069ff26Swdenk Immediately after the terminating 0 follow the images, one by 48146069ff26Swdenk one, all aligned on "uint32_t" boundaries (size rounded up to 48156069ff26Swdenk a multiple of 4 bytes). 48166069ff26Swdenk 48176069ff26Swdenk "Firmware Images" are binary images containing firmware (like 48186069ff26Swdenk U-Boot or FPGA images) which usually will be programmed to 48196069ff26Swdenk flash memory. 48206069ff26Swdenk 48216069ff26Swdenk "Script files" are command sequences that will be executed by 48226069ff26Swdenk U-Boot's command interpreter; this feature is especially 48236069ff26Swdenk useful when you configure U-Boot to use a real shell (hush) 48246069ff26Swdenk as command interpreter. 48256069ff26Swdenk 482644f074c7SMarek VasutBooting the Linux zImage: 482744f074c7SMarek Vasut------------------------- 482844f074c7SMarek Vasut 482944f074c7SMarek VasutOn some platforms, it's possible to boot Linux zImage. This is done 483044f074c7SMarek Vasutusing the "bootz" command. The syntax of "bootz" command is the same 483144f074c7SMarek Vasutas the syntax of "bootm" command. 483244f074c7SMarek Vasut 4833017e1f3fSMarek VasutNote, defining the CONFIG_SUPPORT_INITRD_RAW allows user to supply 4834017e1f3fSMarek Vasutkernel with raw initrd images. The syntax is slightly different, the 4835017e1f3fSMarek Vasutaddress of the initrd must be augmented by it's size, in the following 4836017e1f3fSMarek Vasutformat: "<initrd addres>:<initrd size>". 4837017e1f3fSMarek Vasut 4838c609719bSwdenk 4839c609719bSwdenkStandalone HOWTO: 4840c609719bSwdenk================= 4841c609719bSwdenk 4842c609719bSwdenkOne of the features of U-Boot is that you can dynamically load and 4843c609719bSwdenkrun "standalone" applications, which can use some resources of 4844c609719bSwdenkU-Boot like console I/O functions or interrupt services. 4845c609719bSwdenk 4846c609719bSwdenkTwo simple examples are included with the sources: 4847c609719bSwdenk 4848c609719bSwdenk"Hello World" Demo: 4849c609719bSwdenk------------------- 4850c609719bSwdenk 4851c609719bSwdenk'examples/hello_world.c' contains a small "Hello World" Demo 4852c609719bSwdenkapplication; it is automatically compiled when you build U-Boot. 4853c609719bSwdenkIt's configured to run at address 0x00040004, so you can play with it 4854c609719bSwdenklike that: 4855c609719bSwdenk 4856c609719bSwdenk => loads 4857c609719bSwdenk ## Ready for S-Record download ... 4858c609719bSwdenk ~>examples/hello_world.srec 4859c609719bSwdenk 1 2 3 4 5 6 7 8 9 10 11 ... 4860c609719bSwdenk [file transfer complete] 4861c609719bSwdenk [connected] 4862c609719bSwdenk ## Start Addr = 0x00040004 4863c609719bSwdenk 4864c609719bSwdenk => go 40004 Hello World! This is a test. 4865c609719bSwdenk ## Starting application at 0x00040004 ... 4866c609719bSwdenk Hello World 4867c609719bSwdenk argc = 7 4868c609719bSwdenk argv[0] = "40004" 4869c609719bSwdenk argv[1] = "Hello" 4870c609719bSwdenk argv[2] = "World!" 4871c609719bSwdenk argv[3] = "This" 4872c609719bSwdenk argv[4] = "is" 4873c609719bSwdenk argv[5] = "a" 4874c609719bSwdenk argv[6] = "test." 4875c609719bSwdenk argv[7] = "<NULL>" 4876c609719bSwdenk Hit any key to exit ... 4877c609719bSwdenk 4878c609719bSwdenk ## Application terminated, rc = 0x0 4879c609719bSwdenk 4880c609719bSwdenkAnother example, which demonstrates how to register a CPM interrupt 4881c609719bSwdenkhandler with the U-Boot code, can be found in 'examples/timer.c'. 4882c609719bSwdenkHere, a CPM timer is set up to generate an interrupt every second. 4883c609719bSwdenkThe interrupt service routine is trivial, just printing a '.' 4884c609719bSwdenkcharacter, but this is just a demo program. The application can be 4885c609719bSwdenkcontrolled by the following keys: 4886c609719bSwdenk 4887c609719bSwdenk ? - print current values og the CPM Timer registers 4888c609719bSwdenk b - enable interrupts and start timer 4889c609719bSwdenk e - stop timer and disable interrupts 4890c609719bSwdenk q - quit application 4891c609719bSwdenk 4892c609719bSwdenk => loads 4893c609719bSwdenk ## Ready for S-Record download ... 4894c609719bSwdenk ~>examples/timer.srec 4895c609719bSwdenk 1 2 3 4 5 6 7 8 9 10 11 ... 4896c609719bSwdenk [file transfer complete] 4897c609719bSwdenk [connected] 4898c609719bSwdenk ## Start Addr = 0x00040004 4899c609719bSwdenk 4900c609719bSwdenk => go 40004 4901c609719bSwdenk ## Starting application at 0x00040004 ... 4902c609719bSwdenk TIMERS=0xfff00980 4903c609719bSwdenk Using timer 1 4904c609719bSwdenk tgcr @ 0xfff00980, tmr @ 0xfff00990, trr @ 0xfff00994, tcr @ 0xfff00998, tcn @ 0xfff0099c, ter @ 0xfff009b0 4905c609719bSwdenk 4906c609719bSwdenkHit 'b': 4907c609719bSwdenk [q, b, e, ?] Set interval 1000000 us 4908c609719bSwdenk Enabling timer 4909c609719bSwdenkHit '?': 4910c609719bSwdenk [q, b, e, ?] ........ 4911c609719bSwdenk tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0xef6, ter=0x0 4912c609719bSwdenkHit '?': 4913c609719bSwdenk [q, b, e, ?] . 4914c609719bSwdenk tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x2ad4, ter=0x0 4915c609719bSwdenkHit '?': 4916c609719bSwdenk [q, b, e, ?] . 4917c609719bSwdenk tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x1efc, ter=0x0 4918c609719bSwdenkHit '?': 4919c609719bSwdenk [q, b, e, ?] . 4920c609719bSwdenk tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x169d, ter=0x0 4921c609719bSwdenkHit 'e': 4922c609719bSwdenk [q, b, e, ?] ...Stopping timer 4923c609719bSwdenkHit 'q': 4924c609719bSwdenk [q, b, e, ?] ## Application terminated, rc = 0x0 4925c609719bSwdenk 4926c609719bSwdenk 492785ec0bccSwdenkMinicom warning: 492885ec0bccSwdenk================ 492985ec0bccSwdenk 49307152b1d0SwdenkOver time, many people have reported problems when trying to use the 493185ec0bccSwdenk"minicom" terminal emulation program for serial download. I (wd) 493285ec0bccSwdenkconsider minicom to be broken, and recommend not to use it. Under 4933f07771ccSwdenkUnix, I recommend to use C-Kermit for general purpose use (and 493485ec0bccSwdenkespecially for kermit binary protocol download ("loadb" command), and 4935e53515a2SKarl O. Pincuse "cu" for S-Record download ("loads" command). See 4936e53515a2SKarl O. Pinchttp://www.denx.de/wiki/view/DULG/SystemSetup#Section_4.3. 4937e53515a2SKarl O. Pincfor help with kermit. 4938e53515a2SKarl O. Pinc 493985ec0bccSwdenk 494052f52c14SwdenkNevertheless, if you absolutely want to use it try adding this 494152f52c14Swdenkconfiguration to your "File transfer protocols" section: 494252f52c14Swdenk 494352f52c14Swdenk Name Program Name U/D FullScr IO-Red. Multi 494452f52c14Swdenk X kermit /usr/bin/kermit -i -l %l -s Y U Y N N 494552f52c14Swdenk Y kermit /usr/bin/kermit -i -l %l -r N D Y N N 494652f52c14Swdenk 494752f52c14Swdenk 4948c609719bSwdenkNetBSD Notes: 4949c609719bSwdenk============= 4950c609719bSwdenk 4951c609719bSwdenkStarting at version 0.9.2, U-Boot supports NetBSD both as host 4952c609719bSwdenk(build U-Boot) and target system (boots NetBSD/mpc8xx). 4953c609719bSwdenk 4954c609719bSwdenkBuilding requires a cross environment; it is known to work on 4955c609719bSwdenkNetBSD/i386 with the cross-powerpc-netbsd-1.3 package (you will also 4956c609719bSwdenkneed gmake since the Makefiles are not compatible with BSD make). 4957c609719bSwdenkNote that the cross-powerpc package does not install include files; 4958c609719bSwdenkattempting to build U-Boot will fail because <machine/ansi.h> is 4959c609719bSwdenkmissing. This file has to be installed and patched manually: 4960c609719bSwdenk 4961c609719bSwdenk # cd /usr/pkg/cross/powerpc-netbsd/include 4962c609719bSwdenk # mkdir powerpc 4963c609719bSwdenk # ln -s powerpc machine 4964c609719bSwdenk # cp /usr/src/sys/arch/powerpc/include/ansi.h powerpc/ansi.h 4965c609719bSwdenk # ${EDIT} powerpc/ansi.h ## must remove __va_list, _BSD_VA_LIST 4966c609719bSwdenk 4967c609719bSwdenkNative builds *don't* work due to incompatibilities between native 4968c609719bSwdenkand U-Boot include files. 4969c609719bSwdenk 4970c609719bSwdenkBooting assumes that (the first part of) the image booted is a 4971c609719bSwdenkstage-2 loader which in turn loads and then invokes the kernel 4972c609719bSwdenkproper. Loader sources will eventually appear in the NetBSD source 4973c609719bSwdenktree (probably in sys/arc/mpc8xx/stand/u-boot_stage2/); in the 49742a8af187Swdenkmeantime, see ftp://ftp.denx.de/pub/u-boot/ppcboot_stage2.tar.gz 4975c609719bSwdenk 4976c609719bSwdenk 4977c609719bSwdenkImplementation Internals: 4978c609719bSwdenk========================= 4979c609719bSwdenk 4980c609719bSwdenkThe following is not intended to be a complete description of every 4981c609719bSwdenkimplementation detail. However, it should help to understand the 4982c609719bSwdenkinner workings of U-Boot and make it easier to port it to custom 4983c609719bSwdenkhardware. 4984c609719bSwdenk 4985c609719bSwdenk 4986c609719bSwdenkInitial Stack, Global Data: 4987c609719bSwdenk--------------------------- 4988c609719bSwdenk 4989c609719bSwdenkThe implementation of U-Boot is complicated by the fact that U-Boot 4990c609719bSwdenkstarts running out of ROM (flash memory), usually without access to 4991c609719bSwdenksystem RAM (because the memory controller is not initialized yet). 4992c609719bSwdenkThis means that we don't have writable Data or BSS segments, and BSS 4993c609719bSwdenkis not initialized as zero. To be able to get a C environment working 4994c609719bSwdenkat all, we have to allocate at least a minimal stack. Implementation 4995c609719bSwdenkoptions for this are defined and restricted by the CPU used: Some CPU 4996c609719bSwdenkmodels provide on-chip memory (like the IMMR area on MPC8xx and 4997c609719bSwdenkMPC826x processors), on others (parts of) the data cache can be 4998c609719bSwdenklocked as (mis-) used as memory, etc. 4999c609719bSwdenk 50007152b1d0Swdenk Chris Hallinan posted a good summary of these issues to the 50010668236bSWolfgang Denk U-Boot mailing list: 500243d9616cSwdenk 500343d9616cSwdenk Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)? 500443d9616cSwdenk From: "Chris Hallinan" <clh@net1plus.com> 500543d9616cSwdenk Date: Mon, 10 Feb 2003 16:43:46 -0500 (22:43 MET) 500643d9616cSwdenk ... 500743d9616cSwdenk 500843d9616cSwdenk Correct me if I'm wrong, folks, but the way I understand it 500943d9616cSwdenk is this: Using DCACHE as initial RAM for Stack, etc, does not 501043d9616cSwdenk require any physical RAM backing up the cache. The cleverness 501143d9616cSwdenk is that the cache is being used as a temporary supply of 501243d9616cSwdenk necessary storage before the SDRAM controller is setup. It's 501311ccc33fSMarcel Ziswiler beyond the scope of this list to explain the details, but you 501443d9616cSwdenk can see how this works by studying the cache architecture and 501543d9616cSwdenk operation in the architecture and processor-specific manuals. 501643d9616cSwdenk 501743d9616cSwdenk OCM is On Chip Memory, which I believe the 405GP has 4K. It 501843d9616cSwdenk is another option for the system designer to use as an 501911ccc33fSMarcel Ziswiler initial stack/RAM area prior to SDRAM being available. Either 502043d9616cSwdenk option should work for you. Using CS 4 should be fine if your 502143d9616cSwdenk board designers haven't used it for something that would 502243d9616cSwdenk cause you grief during the initial boot! It is frequently not 502343d9616cSwdenk used. 502443d9616cSwdenk 50256d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_INIT_RAM_ADDR should be somewhere that won't interfere 502643d9616cSwdenk with your processor/board/system design. The default value 502743d9616cSwdenk you will find in any recent u-boot distribution in 50288a316c9bSStefan Roese walnut.h should work for you. I'd set it to a value larger 502943d9616cSwdenk than your SDRAM module. If you have a 64MB SDRAM module, set 503043d9616cSwdenk it above 400_0000. Just make sure your board has no resources 503143d9616cSwdenk that are supposed to respond to that address! That code in 503243d9616cSwdenk start.S has been around a while and should work as is when 503343d9616cSwdenk you get the config right. 503443d9616cSwdenk 503543d9616cSwdenk -Chris Hallinan 503643d9616cSwdenk DS4.COM, Inc. 503743d9616cSwdenk 5038c609719bSwdenkIt is essential to remember this, since it has some impact on the C 5039c609719bSwdenkcode for the initialization procedures: 5040c609719bSwdenk 5041c609719bSwdenk* Initialized global data (data segment) is read-only. Do not attempt 5042c609719bSwdenk to write it. 5043c609719bSwdenk 504411ccc33fSMarcel Ziswiler* Do not use any uninitialized global data (or implicitely initialized 5045c609719bSwdenk as zero data - BSS segment) at all - this is undefined, initiali- 50467152b1d0Swdenk zation is performed later (when relocating to RAM). 5047c609719bSwdenk 5048c609719bSwdenk* Stack space is very limited. Avoid big data buffers or things like 5049c609719bSwdenk that. 5050c609719bSwdenk 5051c609719bSwdenkHaving only the stack as writable memory limits means we cannot use 5052c609719bSwdenknormal global data to share information beween the code. But it 5053c609719bSwdenkturned out that the implementation of U-Boot can be greatly 5054c609719bSwdenksimplified by making a global data structure (gd_t) available to all 5055c609719bSwdenkfunctions. We could pass a pointer to this data as argument to _all_ 5056c609719bSwdenkfunctions, but this would bloat the code. Instead we use a feature of 5057c609719bSwdenkthe GCC compiler (Global Register Variables) to share the data: we 5058c609719bSwdenkplace a pointer (gd) to the global data into a register which we 5059c609719bSwdenkreserve for this purpose. 5060c609719bSwdenk 50617152b1d0SwdenkWhen choosing a register for such a purpose we are restricted by the 5062c609719bSwdenkrelevant (E)ABI specifications for the current architecture, and by 5063c609719bSwdenkGCC's implementation. 5064c609719bSwdenk 5065c609719bSwdenkFor PowerPC, the following registers have specific use: 5066c609719bSwdenk R1: stack pointer 5067e7670f6cSWolfgang Denk R2: reserved for system use 5068c609719bSwdenk R3-R4: parameter passing and return values 5069c609719bSwdenk R5-R10: parameter passing 5070c609719bSwdenk R13: small data area pointer 5071c609719bSwdenk R30: GOT pointer 5072c609719bSwdenk R31: frame pointer 5073c609719bSwdenk 5074e6bee808SJoakim Tjernlund (U-Boot also uses R12 as internal GOT pointer. r12 5075e6bee808SJoakim Tjernlund is a volatile register so r12 needs to be reset when 5076e6bee808SJoakim Tjernlund going back and forth between asm and C) 5077c609719bSwdenk 5078e7670f6cSWolfgang Denk ==> U-Boot will use R2 to hold a pointer to the global data 5079c609719bSwdenk 5080c609719bSwdenk Note: on PPC, we could use a static initializer (since the 5081c609719bSwdenk address of the global data structure is known at compile time), 5082c609719bSwdenk but it turned out that reserving a register results in somewhat 5083c609719bSwdenk smaller code - although the code savings are not that big (on 5084c609719bSwdenk average for all boards 752 bytes for the whole U-Boot image, 5085c609719bSwdenk 624 text + 127 data). 5086c609719bSwdenk 5087c4db335cSRobin GetzOn Blackfin, the normal C ABI (except for P3) is followed as documented here: 50884c58eb55SMike Frysinger http://docs.blackfin.uclinux.org/doku.php?id=application_binary_interface 50894c58eb55SMike Frysinger 5090c4db335cSRobin Getz ==> U-Boot will use P3 to hold a pointer to the global data 50914c58eb55SMike Frysinger 5092c609719bSwdenkOn ARM, the following registers are used: 5093c609719bSwdenk 5094c609719bSwdenk R0: function argument word/integer result 5095c609719bSwdenk R1-R3: function argument word 5096c609719bSwdenk R9: GOT pointer 5097c609719bSwdenk R10: stack limit (used only if stack checking if enabled) 5098c609719bSwdenk R11: argument (frame) pointer 5099c609719bSwdenk R12: temporary workspace 5100c609719bSwdenk R13: stack pointer 5101c609719bSwdenk R14: link register 5102c609719bSwdenk R15: program counter 5103c609719bSwdenk 5104c609719bSwdenk ==> U-Boot will use R8 to hold a pointer to the global data 5105c609719bSwdenk 51060df01fd3SThomas ChouOn Nios II, the ABI is documented here: 51070df01fd3SThomas Chou http://www.altera.com/literature/hb/nios2/n2cpu_nii51016.pdf 51080df01fd3SThomas Chou 51090df01fd3SThomas Chou ==> U-Boot will use gp to hold a pointer to the global data 51100df01fd3SThomas Chou 51110df01fd3SThomas Chou Note: on Nios II, we give "-G0" option to gcc and don't use gp 51120df01fd3SThomas Chou to access small data sections, so gp is free. 51130df01fd3SThomas Chou 5114afc1ce82SMacpaul LinOn NDS32, the following registers are used: 5115afc1ce82SMacpaul Lin 5116afc1ce82SMacpaul Lin R0-R1: argument/return 5117afc1ce82SMacpaul Lin R2-R5: argument 5118afc1ce82SMacpaul Lin R15: temporary register for assembler 5119afc1ce82SMacpaul Lin R16: trampoline register 5120afc1ce82SMacpaul Lin R28: frame pointer (FP) 5121afc1ce82SMacpaul Lin R29: global pointer (GP) 5122afc1ce82SMacpaul Lin R30: link register (LP) 5123afc1ce82SMacpaul Lin R31: stack pointer (SP) 5124afc1ce82SMacpaul Lin PC: program counter (PC) 5125afc1ce82SMacpaul Lin 5126afc1ce82SMacpaul Lin ==> U-Boot will use R10 to hold a pointer to the global data 5127afc1ce82SMacpaul Lin 5128d87080b7SWolfgang DenkNOTE: DECLARE_GLOBAL_DATA_PTR must be used with file-global scope, 5129d87080b7SWolfgang Denkor current versions of GCC may "optimize" the code too much. 5130c609719bSwdenk 5131c609719bSwdenkMemory Management: 5132c609719bSwdenk------------------ 5133c609719bSwdenk 5134c609719bSwdenkU-Boot runs in system state and uses physical addresses, i.e. the 5135c609719bSwdenkMMU is not used either for address mapping nor for memory protection. 5136c609719bSwdenk 5137c609719bSwdenkThe available memory is mapped to fixed addresses using the memory 5138c609719bSwdenkcontroller. In this process, a contiguous block is formed for each 5139c609719bSwdenkmemory type (Flash, SDRAM, SRAM), even when it consists of several 5140c609719bSwdenkphysical memory banks. 5141c609719bSwdenk 5142c609719bSwdenkU-Boot is installed in the first 128 kB of the first Flash bank (on 5143c609719bSwdenkTQM8xxL modules this is the range 0x40000000 ... 0x4001FFFF). After 5144c609719bSwdenkbooting and sizing and initializing DRAM, the code relocates itself 5145c609719bSwdenkto the upper end of DRAM. Immediately below the U-Boot code some 51466d0f6bcfSJean-Christophe PLAGNIOL-VILLARDmemory is reserved for use by malloc() [see CONFIG_SYS_MALLOC_LEN 5147c609719bSwdenkconfiguration setting]. Below that, a structure with global Board 5148c609719bSwdenkInfo data is placed, followed by the stack (growing downward). 5149c609719bSwdenk 5150c609719bSwdenkAdditionally, some exception handler code is copied to the low 8 kB 5151c609719bSwdenkof DRAM (0x00000000 ... 0x00001FFF). 5152c609719bSwdenk 5153c609719bSwdenkSo a typical memory configuration with 16 MB of DRAM could look like 5154c609719bSwdenkthis: 5155c609719bSwdenk 5156c609719bSwdenk 0x0000 0000 Exception Vector code 5157c609719bSwdenk : 5158c609719bSwdenk 0x0000 1FFF 5159c609719bSwdenk 0x0000 2000 Free for Application Use 5160c609719bSwdenk : 5161c609719bSwdenk : 5162c609719bSwdenk 5163c609719bSwdenk : 5164c609719bSwdenk : 5165c609719bSwdenk 0x00FB FF20 Monitor Stack (Growing downward) 5166c609719bSwdenk 0x00FB FFAC Board Info Data and permanent copy of global data 5167c609719bSwdenk 0x00FC 0000 Malloc Arena 5168c609719bSwdenk : 5169c609719bSwdenk 0x00FD FFFF 5170c609719bSwdenk 0x00FE 0000 RAM Copy of Monitor Code 5171c609719bSwdenk ... eventually: LCD or video framebuffer 5172c609719bSwdenk ... eventually: pRAM (Protected RAM - unchanged by reset) 5173c609719bSwdenk 0x00FF FFFF [End of RAM] 5174c609719bSwdenk 5175c609719bSwdenk 5176c609719bSwdenkSystem Initialization: 5177c609719bSwdenk---------------------- 5178c609719bSwdenk 5179c609719bSwdenkIn the reset configuration, U-Boot starts at the reset entry point 518011ccc33fSMarcel Ziswiler(on most PowerPC systems at address 0x00000100). Because of the reset 5181c609719bSwdenkconfiguration for CS0# this is a mirror of the onboard Flash memory. 51827152b1d0SwdenkTo be able to re-map memory U-Boot then jumps to its link address. 5183c609719bSwdenkTo be able to implement the initialization code in C, a (small!) 5184c609719bSwdenkinitial stack is set up in the internal Dual Ported RAM (in case CPUs 5185c609719bSwdenkwhich provide such a feature like MPC8xx or MPC8260), or in a locked 5186c609719bSwdenkpart of the data cache. After that, U-Boot initializes the CPU core, 5187c609719bSwdenkthe caches and the SIU. 5188c609719bSwdenk 5189c609719bSwdenkNext, all (potentially) available memory banks are mapped using a 5190c609719bSwdenkpreliminary mapping. For example, we put them on 512 MB boundaries 5191c609719bSwdenk(multiples of 0x20000000: SDRAM on 0x00000000 and 0x20000000, Flash 5192c609719bSwdenkon 0x40000000 and 0x60000000, SRAM on 0x80000000). Then UPM A is 5193c609719bSwdenkprogrammed for SDRAM access. Using the temporary configuration, a 5194c609719bSwdenksimple memory test is run that determines the size of the SDRAM 5195c609719bSwdenkbanks. 5196c609719bSwdenk 5197c609719bSwdenkWhen there is more than one SDRAM bank, and the banks are of 51987152b1d0Swdenkdifferent size, the largest is mapped first. For equal size, the first 5199c609719bSwdenkbank (CS2#) is mapped first. The first mapping is always for address 5200c609719bSwdenk0x00000000, with any additional banks following immediately to create 5201c609719bSwdenkcontiguous memory starting from 0. 5202c609719bSwdenk 5203c609719bSwdenkThen, the monitor installs itself at the upper end of the SDRAM area 5204c609719bSwdenkand allocates memory for use by malloc() and for the global Board 5205c609719bSwdenkInfo data; also, the exception vector code is copied to the low RAM 5206c609719bSwdenkpages, and the final stack is set up. 5207c609719bSwdenk 5208c609719bSwdenkOnly after this relocation will you have a "normal" C environment; 5209c609719bSwdenkuntil that you are restricted in several ways, mostly because you are 5210c609719bSwdenkrunning from ROM, and because the code will have to be relocated to a 5211c609719bSwdenknew address in RAM. 5212c609719bSwdenk 5213c609719bSwdenk 5214c609719bSwdenkU-Boot Porting Guide: 5215c609719bSwdenk---------------------- 5216c609719bSwdenk 5217c609719bSwdenk[Based on messages by Jerry Van Baren in the U-Boot-Users mailing 52186aff3115Swdenklist, October 2002] 5219c609719bSwdenk 5220c609719bSwdenk 5221c609719bSwdenkint main(int argc, char *argv[]) 5222c609719bSwdenk{ 5223c609719bSwdenk sighandler_t no_more_time; 5224c609719bSwdenk 5225c609719bSwdenk signal(SIGALRM, no_more_time); 5226c609719bSwdenk alarm(PROJECT_DEADLINE - toSec (3 * WEEK)); 5227c609719bSwdenk 5228c609719bSwdenk if (available_money > available_manpower) { 52296c3fef28SJerry Van Baren Pay consultant to port U-Boot; 5230c609719bSwdenk return 0; 5231c609719bSwdenk } 5232c609719bSwdenk 5233c609719bSwdenk Download latest U-Boot source; 5234c609719bSwdenk 52350668236bSWolfgang Denk Subscribe to u-boot mailing list; 52366aff3115Swdenk 52376c3fef28SJerry Van Baren if (clueless) 5238c609719bSwdenk email("Hi, I am new to U-Boot, how do I get started?"); 5239c609719bSwdenk 5240c609719bSwdenk while (learning) { 5241c609719bSwdenk Read the README file in the top level directory; 52427cb22f97Swdenk Read http://www.denx.de/twiki/bin/view/DULG/Manual; 52436c3fef28SJerry Van Baren Read applicable doc/*.README; 5244c609719bSwdenk Read the source, Luke; 52456c3fef28SJerry Van Baren /* find . -name "*.[chS]" | xargs grep -i <keyword> */ 5246c609719bSwdenk } 5247c609719bSwdenk 52486c3fef28SJerry Van Baren if (available_money > toLocalCurrency ($2500)) 52496c3fef28SJerry Van Baren Buy a BDI3000; 52506c3fef28SJerry Van Baren else 5251c609719bSwdenk Add a lot of aggravation and time; 5252c609719bSwdenk 52536c3fef28SJerry Van Baren if (a similar board exists) { /* hopefully... */ 52546c3fef28SJerry Van Baren cp -a board/<similar> board/<myboard> 52556c3fef28SJerry Van Baren cp include/configs/<similar>.h include/configs/<myboard>.h 52566c3fef28SJerry Van Baren } else { 5257c609719bSwdenk Create your own board support subdirectory; 52586c3fef28SJerry Van Baren Create your own board include/configs/<myboard>.h file; 52596c3fef28SJerry Van Baren } 52606c3fef28SJerry Van Baren Edit new board/<myboard> files 52616c3fef28SJerry Van Baren Edit new include/configs/<myboard>.h 5262c609719bSwdenk 52636c3fef28SJerry Van Baren while (!accepted) { 5264c609719bSwdenk while (!running) { 5265c609719bSwdenk do { 5266c609719bSwdenk Add / modify source code; 5267c609719bSwdenk } until (compiles); 5268c609719bSwdenk Debug; 5269c609719bSwdenk if (clueless) 5270c609719bSwdenk email("Hi, I am having problems..."); 5271c609719bSwdenk } 52726c3fef28SJerry Van Baren Send patch file to the U-Boot email list; 52736c3fef28SJerry Van Baren if (reasonable critiques) 52746c3fef28SJerry Van Baren Incorporate improvements from email list code review; 52756c3fef28SJerry Van Baren else 52766c3fef28SJerry Van Baren Defend code as written; 52776c3fef28SJerry Van Baren } 5278c609719bSwdenk 5279c609719bSwdenk return 0; 5280c609719bSwdenk} 5281c609719bSwdenk 5282c609719bSwdenkvoid no_more_time (int sig) 5283c609719bSwdenk{ 5284c609719bSwdenk hire_a_guru(); 5285c609719bSwdenk} 5286c609719bSwdenk 5287c609719bSwdenk 5288c609719bSwdenkCoding Standards: 5289c609719bSwdenk----------------- 5290c609719bSwdenk 5291c609719bSwdenkAll contributions to U-Boot should conform to the Linux kernel 52922c051651SDetlev Zundelcoding style; see the file "Documentation/CodingStyle" and the script 52937ca9296eSWolfgang Denk"scripts/Lindent" in your Linux kernel source directory. 5294c609719bSwdenk 52952c051651SDetlev ZundelSource files originating from a different project (for example the 52962c051651SDetlev ZundelMTD subsystem) are generally exempt from these guidelines and are not 52972c051651SDetlev Zundelreformated to ease subsequent migration to newer versions of those 52982c051651SDetlev Zundelsources. 52992c051651SDetlev Zundel 53002c051651SDetlev ZundelPlease note that U-Boot is implemented in C (and to some small parts in 53012c051651SDetlev ZundelAssembler); no C++ is used, so please do not use C++ style comments (//) 53022c051651SDetlev Zundelin your code. 5303c609719bSwdenk 5304c178d3daSwdenkPlease also stick to the following formatting rules: 5305180d3f74Swdenk- remove any trailing white space 53067ca9296eSWolfgang Denk- use TAB characters for indentation and vertical alignment, not spaces 5307180d3f74Swdenk- make sure NOT to use DOS '\r\n' line feeds 53087ca9296eSWolfgang Denk- do not add more than 2 consecutive empty lines to source files 5309180d3f74Swdenk- do not add trailing empty lines to source files 5310180d3f74Swdenk 5311c609719bSwdenkSubmissions which do not conform to the standards may be returned 5312c609719bSwdenkwith a request to reformat the changes. 5313c609719bSwdenk 5314c609719bSwdenk 5315c609719bSwdenkSubmitting Patches: 5316c609719bSwdenk------------------- 5317c609719bSwdenk 5318c609719bSwdenkSince the number of patches for U-Boot is growing, we need to 5319c609719bSwdenkestablish some rules. Submissions which do not conform to these rules 5320c609719bSwdenkmay be rejected, even when they contain important and valuable stuff. 5321c609719bSwdenk 53220d28f34bSMagnus LiljaPlease see http://www.denx.de/wiki/U-Boot/Patches for details. 5323218ca724SWolfgang Denk 53240668236bSWolfgang DenkPatches shall be sent to the u-boot mailing list <u-boot@lists.denx.de>; 53250668236bSWolfgang Denksee http://lists.denx.de/mailman/listinfo/u-boot 53260668236bSWolfgang Denk 5327c609719bSwdenkWhen you send a patch, please include the following information with 5328c609719bSwdenkit: 5329c609719bSwdenk 5330c609719bSwdenk* For bug fixes: a description of the bug and how your patch fixes 5331c609719bSwdenk this bug. Please try to include a way of demonstrating that the 5332c609719bSwdenk patch actually fixes something. 5333c609719bSwdenk 5334c609719bSwdenk* For new features: a description of the feature and your 5335c609719bSwdenk implementation. 5336c609719bSwdenk 5337c609719bSwdenk* A CHANGELOG entry as plaintext (separate from the patch) 5338c609719bSwdenk 5339c609719bSwdenk* For major contributions, your entry to the CREDITS file 5340c609719bSwdenk 5341c609719bSwdenk* When you add support for a new board, don't forget to add this 53427ca9296eSWolfgang Denk board to the MAINTAINERS file, too. 5343c609719bSwdenk 5344c609719bSwdenk* If your patch adds new configuration options, don't forget to 5345c609719bSwdenk document these in the README file. 5346c609719bSwdenk 5347218ca724SWolfgang Denk* The patch itself. If you are using git (which is *strongly* 5348218ca724SWolfgang Denk recommended) you can easily generate the patch using the 53497ca9296eSWolfgang Denk "git format-patch". If you then use "git send-email" to send it to 5350218ca724SWolfgang Denk the U-Boot mailing list, you will avoid most of the common problems 5351218ca724SWolfgang Denk with some other mail clients. 5352c609719bSwdenk 5353218ca724SWolfgang Denk If you cannot use git, use "diff -purN OLD NEW". If your version of 5354218ca724SWolfgang Denk diff does not support these options, then get the latest version of 5355218ca724SWolfgang Denk GNU diff. 53566dff5529Swdenk 5357218ca724SWolfgang Denk The current directory when running this command shall be the parent 5358218ca724SWolfgang Denk directory of the U-Boot source tree (i. e. please make sure that 5359218ca724SWolfgang Denk your patch includes sufficient directory information for the 5360218ca724SWolfgang Denk affected files). 5361218ca724SWolfgang Denk 5362218ca724SWolfgang Denk We prefer patches as plain text. MIME attachments are discouraged, 5363218ca724SWolfgang Denk and compressed attachments must not be used. 5364c609719bSwdenk 536552f52c14Swdenk* If one logical set of modifications affects or creates several 536652f52c14Swdenk files, all these changes shall be submitted in a SINGLE patch file. 536752f52c14Swdenk 536852f52c14Swdenk* Changesets that contain different, unrelated modifications shall be 536952f52c14Swdenk submitted as SEPARATE patches, one patch per changeset. 537052f52c14Swdenk 537152f52c14Swdenk 5372c609719bSwdenkNotes: 5373c609719bSwdenk 5374c609719bSwdenk* Before sending the patch, run the MAKEALL script on your patched 5375c609719bSwdenk source tree and make sure that no errors or warnings are reported 5376c609719bSwdenk for any of the boards. 5377c609719bSwdenk 5378c609719bSwdenk* Keep your modifications to the necessary minimum: A patch 5379c609719bSwdenk containing several unrelated changes or arbitrary reformats will be 5380c609719bSwdenk returned with a request to re-formatting / split it. 5381c609719bSwdenk 5382c609719bSwdenk* If you modify existing code, make sure that your new code does not 5383c609719bSwdenk add to the memory footprint of the code ;-) Small is beautiful! 5384c609719bSwdenk When adding new features, these should compile conditionally only 5385c609719bSwdenk (using #ifdef), and the resulting code with the new feature 5386c609719bSwdenk disabled must not need more memory than the old code without your 5387c609719bSwdenk modification. 538890dc6704Swdenk 53890668236bSWolfgang Denk* Remember that there is a size limit of 100 kB per message on the 53900668236bSWolfgang Denk u-boot mailing list. Bigger patches will be moderated. If they are 53910668236bSWolfgang Denk reasonable and not too big, they will be acknowledged. But patches 53920668236bSWolfgang Denk bigger than the size limit should be avoided. 5393