1c609719bSwdenk# 26abe6fb6SDetlev Zundel# (C) Copyright 2000 - 2011 3c609719bSwdenk# Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4c609719bSwdenk# 5c609719bSwdenk# See file CREDITS for list of people who contributed to this 6c609719bSwdenk# project. 7c609719bSwdenk# 8c609719bSwdenk# This program is free software; you can redistribute it and/or 9c609719bSwdenk# modify it under the terms of the GNU General Public License as 10c609719bSwdenk# published by the Free Software Foundation; either version 2 of 11c609719bSwdenk# the License, or (at your option) any later version. 12c609719bSwdenk# 13c609719bSwdenk# This program is distributed in the hope that it will be useful, 14c609719bSwdenk# but WITHOUT ANY WARRANTY; without even the implied warranty of 15c609719bSwdenk# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16c609719bSwdenk# GNU General Public License for more details. 17c609719bSwdenk# 18c609719bSwdenk# You should have received a copy of the GNU General Public License 19c609719bSwdenk# along with this program; if not, write to the Free Software 20c609719bSwdenk# Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21c609719bSwdenk# MA 02111-1307 USA 22c609719bSwdenk# 23c609719bSwdenk 24c609719bSwdenkSummary: 25c609719bSwdenk======== 26c609719bSwdenk 2724ee89b9SwdenkThis directory contains the source code for U-Boot, a boot loader for 28e86e5a07SwdenkEmbedded boards based on PowerPC, ARM, MIPS and several other 29e86e5a07Swdenkprocessors, which can be installed in a boot ROM and used to 30e86e5a07Swdenkinitialize and test the hardware or to download and run application 31e86e5a07Swdenkcode. 32c609719bSwdenk 33c609719bSwdenkThe development of U-Boot is closely related to Linux: some parts of 3424ee89b9Swdenkthe source code originate in the Linux source tree, we have some 3524ee89b9Swdenkheader files in common, and special provision has been made to 36c609719bSwdenksupport booting of Linux images. 37c609719bSwdenk 38c609719bSwdenkSome attention has been paid to make this software easily 39c609719bSwdenkconfigurable and extendable. For instance, all monitor commands are 40c609719bSwdenkimplemented with the same call interface, so that it's very easy to 41c609719bSwdenkadd new commands. Also, instead of permanently adding rarely used 42c609719bSwdenkcode (for instance hardware test utilities) to the monitor, you can 43c609719bSwdenkload and run it dynamically. 44c609719bSwdenk 45c609719bSwdenk 46c609719bSwdenkStatus: 47c609719bSwdenk======= 48c609719bSwdenk 49c609719bSwdenkIn general, all boards for which a configuration option exists in the 50c609719bSwdenkMakefile have been tested to some extent and can be considered 51c609719bSwdenk"working". In fact, many of them are used in production systems. 52c609719bSwdenk 53c609719bSwdenkIn case of problems see the CHANGELOG and CREDITS files to find out 54218ca724SWolfgang Denkwho contributed the specific port. The MAINTAINERS file lists board 55218ca724SWolfgang Denkmaintainers. 56c609719bSwdenk 57c609719bSwdenk 58c609719bSwdenkWhere to get help: 59c609719bSwdenk================== 60c609719bSwdenk 61c609719bSwdenkIn case you have questions about, problems with or contributions for 62c609719bSwdenkU-Boot you should send a message to the U-Boot mailing list at 630c32565fSPeter Tyser<u-boot@lists.denx.de>. There is also an archive of previous traffic 640c32565fSPeter Tyseron the mailing list - please search the archive before asking FAQ's. 650c32565fSPeter TyserPlease see http://lists.denx.de/pipermail/u-boot and 660c32565fSPeter Tyserhttp://dir.gmane.org/gmane.comp.boot-loaders.u-boot 67c609719bSwdenk 68c609719bSwdenk 69218ca724SWolfgang DenkWhere to get source code: 70218ca724SWolfgang Denk========================= 71218ca724SWolfgang Denk 72218ca724SWolfgang DenkThe U-Boot source code is maintained in the git repository at 73218ca724SWolfgang Denkgit://www.denx.de/git/u-boot.git ; you can browse it online at 74218ca724SWolfgang Denkhttp://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=summary 75218ca724SWolfgang Denk 76218ca724SWolfgang DenkThe "snapshot" links on this page allow you to download tarballs of 7711ccc33fSMarcel Ziswilerany version you might be interested in. Official releases are also 78218ca724SWolfgang Denkavailable for FTP download from the ftp://ftp.denx.de/pub/u-boot/ 79218ca724SWolfgang Denkdirectory. 80218ca724SWolfgang Denk 81d4ee711dSAnatolij GustschinPre-built (and tested) images are available from 82218ca724SWolfgang Denkftp://ftp.denx.de/pub/u-boot/images/ 83218ca724SWolfgang Denk 84218ca724SWolfgang Denk 85c609719bSwdenkWhere we come from: 86c609719bSwdenk=================== 87c609719bSwdenk 88c609719bSwdenk- start from 8xxrom sources 8924ee89b9Swdenk- create PPCBoot project (http://sourceforge.net/projects/ppcboot) 90c609719bSwdenk- clean up code 91c609719bSwdenk- make it easier to add custom boards 92c609719bSwdenk- make it possible to add other [PowerPC] CPUs 93c609719bSwdenk- extend functions, especially: 94c609719bSwdenk * Provide extended interface to Linux boot loader 95c609719bSwdenk * S-Record download 96c609719bSwdenk * network boot 9711ccc33fSMarcel Ziswiler * PCMCIA / CompactFlash / ATA disk / SCSI ... boot 9824ee89b9Swdenk- create ARMBoot project (http://sourceforge.net/projects/armboot) 99c609719bSwdenk- add other CPU families (starting with ARM) 10024ee89b9Swdenk- create U-Boot project (http://sourceforge.net/projects/u-boot) 1010d28f34bSMagnus Lilja- current project page: see http://www.denx.de/wiki/U-Boot 10224ee89b9Swdenk 10324ee89b9Swdenk 10424ee89b9SwdenkNames and Spelling: 10524ee89b9Swdenk=================== 10624ee89b9Swdenk 10724ee89b9SwdenkThe "official" name of this project is "Das U-Boot". The spelling 10824ee89b9Swdenk"U-Boot" shall be used in all written text (documentation, comments 10924ee89b9Swdenkin source files etc.). Example: 11024ee89b9Swdenk 11124ee89b9Swdenk This is the README file for the U-Boot project. 11224ee89b9Swdenk 11324ee89b9SwdenkFile names etc. shall be based on the string "u-boot". Examples: 11424ee89b9Swdenk 11524ee89b9Swdenk include/asm-ppc/u-boot.h 11624ee89b9Swdenk 11724ee89b9Swdenk #include <asm/u-boot.h> 11824ee89b9Swdenk 11924ee89b9SwdenkVariable names, preprocessor constants etc. shall be either based on 12024ee89b9Swdenkthe string "u_boot" or on "U_BOOT". Example: 12124ee89b9Swdenk 12224ee89b9Swdenk U_BOOT_VERSION u_boot_logo 12324ee89b9Swdenk IH_OS_U_BOOT u_boot_hush_start 124c609719bSwdenk 125c609719bSwdenk 12693f19cc0SwdenkVersioning: 12793f19cc0Swdenk=========== 12893f19cc0Swdenk 129360d883aSThomas WeberStarting with the release in October 2008, the names of the releases 130360d883aSThomas Weberwere changed from numerical release numbers without deeper meaning 131360d883aSThomas Weberinto a time stamp based numbering. Regular releases are identified by 132360d883aSThomas Webernames consisting of the calendar year and month of the release date. 133360d883aSThomas WeberAdditional fields (if present) indicate release candidates or bug fix 134360d883aSThomas Weberreleases in "stable" maintenance trees. 13593f19cc0Swdenk 136360d883aSThomas WeberExamples: 137360d883aSThomas Weber U-Boot v2009.11 - Release November 2009 138360d883aSThomas Weber U-Boot v2009.11.1 - Release 1 in version November 2009 stable tree 139360d883aSThomas Weber U-Boot v2010.09-rc1 - Release candiate 1 for September 2010 release 14093f19cc0Swdenk 14193f19cc0Swdenk 142c609719bSwdenkDirectory Hierarchy: 143c609719bSwdenk==================== 144c609719bSwdenk 1458d321b81SPeter Tyser/arch Architecture specific files 1468d321b81SPeter Tyser /arm Files generic to ARM architecture 1478d321b81SPeter Tyser /cpu CPU specific files 1488d321b81SPeter Tyser /arm720t Files specific to ARM 720 CPUs 1498d321b81SPeter Tyser /arm920t Files specific to ARM 920 CPUs 1506eb0921aSAndreas Bießmann /at91 Files specific to Atmel AT91RM9200 CPU 1518d321b81SPeter Tyser /imx Files specific to Freescale MC9328 i.MX CPUs 1528d321b81SPeter Tyser /s3c24x0 Files specific to Samsung S3C24X0 CPUs 1538d321b81SPeter Tyser /arm925t Files specific to ARM 925 CPUs 1548d321b81SPeter Tyser /arm926ejs Files specific to ARM 926 CPUs 1558d321b81SPeter Tyser /arm1136 Files specific to ARM 1136 CPUs 1568d321b81SPeter Tyser /ixp Files specific to Intel XScale IXP CPUs 1578d321b81SPeter Tyser /pxa Files specific to Intel XScale PXA CPUs 1588d321b81SPeter Tyser /s3c44b0 Files specific to Samsung S3C44B0 CPUs 1598d321b81SPeter Tyser /sa1100 Files specific to Intel StrongARM SA1100 CPUs 1608d321b81SPeter Tyser /lib Architecture specific library files 1618d321b81SPeter Tyser /avr32 Files generic to AVR32 architecture 1628d321b81SPeter Tyser /cpu CPU specific files 1638d321b81SPeter Tyser /lib Architecture specific library files 1648d321b81SPeter Tyser /blackfin Files generic to Analog Devices Blackfin architecture 1658d321b81SPeter Tyser /cpu CPU specific files 1668d321b81SPeter Tyser /lib Architecture specific library files 167fea25720SGraeme Russ /x86 Files generic to x86 architecture 1688d321b81SPeter Tyser /cpu CPU specific files 1698d321b81SPeter Tyser /lib Architecture specific library files 1708d321b81SPeter Tyser /m68k Files generic to m68k architecture 1718d321b81SPeter Tyser /cpu CPU specific files 1728d321b81SPeter Tyser /mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs 1738d321b81SPeter Tyser /mcf5227x Files specific to Freescale ColdFire MCF5227x CPUs 1748d321b81SPeter Tyser /mcf532x Files specific to Freescale ColdFire MCF5329 CPUs 1758d321b81SPeter Tyser /mcf5445x Files specific to Freescale ColdFire MCF5445x CPUs 1768d321b81SPeter Tyser /mcf547x_8x Files specific to Freescale ColdFire MCF547x_8x CPUs 1778d321b81SPeter Tyser /lib Architecture specific library files 1788d321b81SPeter Tyser /microblaze Files generic to microblaze architecture 1798d321b81SPeter Tyser /cpu CPU specific files 1808d321b81SPeter Tyser /lib Architecture specific library files 1818d321b81SPeter Tyser /mips Files generic to MIPS architecture 1828d321b81SPeter Tyser /cpu CPU specific files 18392bbd64eSDaniel Schwierzeck /mips32 Files specific to MIPS32 CPUs 18480421fccSXiangfu Liu /xburst Files specific to Ingenic XBurst CPUs 1858d321b81SPeter Tyser /lib Architecture specific library files 186afc1ce82SMacpaul Lin /nds32 Files generic to NDS32 architecture 187afc1ce82SMacpaul Lin /cpu CPU specific files 188afc1ce82SMacpaul Lin /n1213 Files specific to Andes Technology N1213 CPUs 189afc1ce82SMacpaul Lin /lib Architecture specific library files 1908d321b81SPeter Tyser /nios2 Files generic to Altera NIOS2 architecture 1918d321b81SPeter Tyser /cpu CPU specific files 1928d321b81SPeter Tyser /lib Architecture specific library files 193a47a12beSStefan Roese /powerpc Files generic to PowerPC architecture 1948d321b81SPeter Tyser /cpu CPU specific files 1958d321b81SPeter Tyser /74xx_7xx Files specific to Freescale MPC74xx and 7xx CPUs 1968d321b81SPeter Tyser /mpc5xx Files specific to Freescale MPC5xx CPUs 1978d321b81SPeter Tyser /mpc5xxx Files specific to Freescale MPC5xxx CPUs 1988d321b81SPeter Tyser /mpc8xx Files specific to Freescale MPC8xx CPUs 1998d321b81SPeter Tyser /mpc8220 Files specific to Freescale MPC8220 CPUs 2008d321b81SPeter Tyser /mpc824x Files specific to Freescale MPC824x CPUs 2018d321b81SPeter Tyser /mpc8260 Files specific to Freescale MPC8260 CPUs 2028d321b81SPeter Tyser /mpc85xx Files specific to Freescale MPC85xx CPUs 2038d321b81SPeter Tyser /ppc4xx Files specific to AMCC PowerPC 4xx CPUs 2048d321b81SPeter Tyser /lib Architecture specific library files 2058d321b81SPeter Tyser /sh Files generic to SH architecture 2068d321b81SPeter Tyser /cpu CPU specific files 2078d321b81SPeter Tyser /sh2 Files specific to sh2 CPUs 2088d321b81SPeter Tyser /sh3 Files specific to sh3 CPUs 2098d321b81SPeter Tyser /sh4 Files specific to sh4 CPUs 2108d321b81SPeter Tyser /lib Architecture specific library files 2118d321b81SPeter Tyser /sparc Files generic to SPARC architecture 2128d321b81SPeter Tyser /cpu CPU specific files 2138d321b81SPeter Tyser /leon2 Files specific to Gaisler LEON2 SPARC CPU 2148d321b81SPeter Tyser /leon3 Files specific to Gaisler LEON3 SPARC CPU 2158d321b81SPeter Tyser /lib Architecture specific library files 2168d321b81SPeter Tyser/api Machine/arch independent API for external apps 2178d321b81SPeter Tyser/board Board dependent files 2188d321b81SPeter Tyser/common Misc architecture independent functions 2198d321b81SPeter Tyser/disk Code for disk drive partition handling 2208d321b81SPeter Tyser/doc Documentation (don't expect too much) 2218d321b81SPeter Tyser/drivers Commonly used device drivers 2228d321b81SPeter Tyser/examples Example code for standalone applications, etc. 2238d321b81SPeter Tyser/fs Filesystem code (cramfs, ext2, jffs2, etc.) 2248d321b81SPeter Tyser/include Header Files 2258d321b81SPeter Tyser/lib Files generic to all architectures 2268d321b81SPeter Tyser /libfdt Library files to support flattened device trees 2278d321b81SPeter Tyser /lzma Library files to support LZMA decompression 2288d321b81SPeter Tyser /lzo Library files to support LZO decompression 2298d321b81SPeter Tyser/net Networking code 2308d321b81SPeter Tyser/post Power On Self Test 2318d321b81SPeter Tyser/rtc Real Time Clock drivers 2328d321b81SPeter Tyser/tools Tools to build S-Record or U-Boot images, etc. 233c609719bSwdenk 234c609719bSwdenkSoftware Configuration: 235c609719bSwdenk======================= 236c609719bSwdenk 237c609719bSwdenkConfiguration is usually done using C preprocessor defines; the 238c609719bSwdenkrationale behind that is to avoid dead code whenever possible. 239c609719bSwdenk 240c609719bSwdenkThere are two classes of configuration variables: 241c609719bSwdenk 242c609719bSwdenk* Configuration _OPTIONS_: 243c609719bSwdenk These are selectable by the user and have names beginning with 244c609719bSwdenk "CONFIG_". 245c609719bSwdenk 246c609719bSwdenk* Configuration _SETTINGS_: 247c609719bSwdenk These depend on the hardware etc. and should not be meddled with if 248c609719bSwdenk you don't know what you're doing; they have names beginning with 2496d0f6bcfSJean-Christophe PLAGNIOL-VILLARD "CONFIG_SYS_". 250c609719bSwdenk 251c609719bSwdenkLater we will add a configuration tool - probably similar to or even 252c609719bSwdenkidentical to what's used for the Linux kernel. Right now, we have to 253c609719bSwdenkdo the configuration by hand, which means creating some symbolic 254c609719bSwdenklinks and editing some configuration files. We use the TQM8xxL boards 255c609719bSwdenkas an example here. 256c609719bSwdenk 257c609719bSwdenk 258c609719bSwdenkSelection of Processor Architecture and Board Type: 259c609719bSwdenk--------------------------------------------------- 260c609719bSwdenk 261c609719bSwdenkFor all supported boards there are ready-to-use default 262c609719bSwdenkconfigurations available; just type "make <board_name>_config". 263c609719bSwdenk 264c609719bSwdenkExample: For a TQM823L module type: 265c609719bSwdenk 266c609719bSwdenk cd u-boot 267c609719bSwdenk make TQM823L_config 268c609719bSwdenk 26911ccc33fSMarcel ZiswilerFor the Cogent platform, you need to specify the CPU type as well; 270c609719bSwdenke.g. "make cogent_mpc8xx_config". And also configure the cogent 271c609719bSwdenkdirectory according to the instructions in cogent/README. 272c609719bSwdenk 273c609719bSwdenk 274c609719bSwdenkConfiguration Options: 275c609719bSwdenk---------------------- 276c609719bSwdenk 277c609719bSwdenkConfiguration depends on the combination of board and CPU type; all 278c609719bSwdenksuch information is kept in a configuration file 279c609719bSwdenk"include/configs/<board_name>.h". 280c609719bSwdenk 281c609719bSwdenkExample: For a TQM823L module, all configuration settings are in 282c609719bSwdenk"include/configs/TQM823L.h". 283c609719bSwdenk 284c609719bSwdenk 2857f6c2cbcSwdenkMany of the options are named exactly as the corresponding Linux 2867f6c2cbcSwdenkkernel configuration options. The intention is to make it easier to 2877f6c2cbcSwdenkbuild a config tool - later. 2887f6c2cbcSwdenk 2897f6c2cbcSwdenk 290c609719bSwdenkThe following options need to be configured: 291c609719bSwdenk 2922628114eSKim Phillips- CPU Type: Define exactly one, e.g. CONFIG_MPC85XX. 293c609719bSwdenk 2942628114eSKim Phillips- Board Type: Define exactly one, e.g. CONFIG_MPC8540ADS. 2956ccec449SWolfgang Denk 2966ccec449SWolfgang Denk- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined) 29709ea0de0SHaavard Skinnemoen Define exactly one, e.g. CONFIG_ATSTK1002 298c609719bSwdenk 299c609719bSwdenk- CPU Module Type: (if CONFIG_COGENT is defined) 300c609719bSwdenk Define exactly one of 301c609719bSwdenk CONFIG_CMA286_60_OLD 302c609719bSwdenk--- FIXME --- not tested yet: 303c609719bSwdenk CONFIG_CMA286_60, CONFIG_CMA286_21, CONFIG_CMA286_60P, 304c609719bSwdenk CONFIG_CMA287_23, CONFIG_CMA287_50 305c609719bSwdenk 306c609719bSwdenk- Motherboard Type: (if CONFIG_COGENT is defined) 307c609719bSwdenk Define exactly one of 308c609719bSwdenk CONFIG_CMA101, CONFIG_CMA102 309c609719bSwdenk 310c609719bSwdenk- Motherboard I/O Modules: (if CONFIG_COGENT is defined) 311c609719bSwdenk Define one or more of 312c609719bSwdenk CONFIG_CMA302 313c609719bSwdenk 314c609719bSwdenk- Motherboard Options: (if CONFIG_CMA101 or CONFIG_CMA102 are defined) 315c609719bSwdenk Define one or more of 316c609719bSwdenk CONFIG_LCD_HEARTBEAT - update a character position on 31711ccc33fSMarcel Ziswiler the LCD display every second with 318c609719bSwdenk a "rotator" |\-/|\-/ 319c609719bSwdenk 3202535d602Swdenk- Board flavour: (if CONFIG_MPC8260ADS is defined) 3212535d602Swdenk CONFIG_ADSTYPE 3222535d602Swdenk Possible values are: 3236d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_8260ADS - original MPC8260ADS 3246d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_8266ADS - MPC8266ADS 3256d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PQ2FADS - PQ2FADS-ZU or PQ2FADS-VR 3266d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_8272ADS - MPC8272ADS 3272535d602Swdenk 328cf946c6dSLei Wen- Marvell Family Member 329cf946c6dSLei Wen CONFIG_SYS_MVFS - define it if you want to enable 330cf946c6dSLei Wen multiple fs option at one time 331cf946c6dSLei Wen for marvell soc family 332cf946c6dSLei Wen 333c609719bSwdenk- MPC824X Family Member (if CONFIG_MPC824X is defined) 334c609719bSwdenk Define exactly one of 335c609719bSwdenk CONFIG_MPC8240, CONFIG_MPC8245 336c609719bSwdenk 33711ccc33fSMarcel Ziswiler- 8xx CPU Options: (if using an MPC8xx CPU) 33866ca92a5Swdenk CONFIG_8xx_GCLK_FREQ - deprecated: CPU clock if 33966ca92a5Swdenk get_gclk_freq() cannot work 3405da627a4Swdenk e.g. if there is no 32KHz 3415da627a4Swdenk reference PIT/RTC clock 34266ca92a5Swdenk CONFIG_8xx_OSCLK - PLL input clock (either EXTCLK 34366ca92a5Swdenk or XTAL/EXTAL) 344c609719bSwdenk 34566ca92a5Swdenk- 859/866/885 CPU options: (if using a MPC859 or MPC866 or MPC885 CPU): 3466d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_8xx_CPUCLK_MIN 3476d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_8xx_CPUCLK_MAX 34866ca92a5Swdenk CONFIG_8xx_CPUCLK_DEFAULT 34975d1ea7fSwdenk See doc/README.MPC866 35075d1ea7fSwdenk 3516d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_MEASURE_CPUCLK 35275d1ea7fSwdenk 35375d1ea7fSwdenk Define this to measure the actual CPU clock instead 35475d1ea7fSwdenk of relying on the correctness of the configured 35575d1ea7fSwdenk values. Mostly useful for board bringup to make sure 35675d1ea7fSwdenk the PLL is locked at the intended frequency. Note 35775d1ea7fSwdenk that this requires a (stable) reference clock (32 kHz 3586d0f6bcfSJean-Christophe PLAGNIOL-VILLARD RTC clock or CONFIG_SYS_8XX_XIN) 35975d1ea7fSwdenk 360506f3918SHeiko Schocher CONFIG_SYS_DELAYED_ICACHE 361506f3918SHeiko Schocher 362506f3918SHeiko Schocher Define this option if you want to enable the 363506f3918SHeiko Schocher ICache only when Code runs from RAM. 364506f3918SHeiko Schocher 36566412c63SKumar Gala- 85xx CPU Options: 36666412c63SKumar Gala CONFIG_SYS_FSL_TBCLK_DIV 36766412c63SKumar Gala 36866412c63SKumar Gala Defines the core time base clock divider ratio compared to the 36966412c63SKumar Gala system clock. On most PQ3 devices this is 8, on newer QorIQ 37066412c63SKumar Gala devices it can be 16 or 32. The ratio varies from SoC to Soc. 37166412c63SKumar Gala 3728f29084aSKumar Gala CONFIG_SYS_FSL_PCIE_COMPAT 3738f29084aSKumar Gala 3748f29084aSKumar Gala Defines the string to utilize when trying to match PCIe device 3758f29084aSKumar Gala tree nodes for the given platform. 3768f29084aSKumar Gala 3770b953ffcSMarkus Klotzbuecher- Intel Monahans options: 3786d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO 3790b953ffcSMarkus Klotzbuecher 3800b953ffcSMarkus Klotzbuecher Defines the Monahans run mode to oscillator 3810b953ffcSMarkus Klotzbuecher ratio. Valid values are 8, 16, 24, 31. The core 3820b953ffcSMarkus Klotzbuecher frequency is this value multiplied by 13 MHz. 3830b953ffcSMarkus Klotzbuecher 3846d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO 3850b953ffcSMarkus Klotzbuecher 3860b953ffcSMarkus Klotzbuecher Defines the Monahans turbo mode to oscillator 3870b953ffcSMarkus Klotzbuecher ratio. Valid values are 1 (default if undefined) and 3880b953ffcSMarkus Klotzbuecher 2. The core frequency as calculated above is multiplied 3890b953ffcSMarkus Klotzbuecher by this value. 3900b953ffcSMarkus Klotzbuecher 39192bbd64eSDaniel Schwierzeck- MIPS CPU options: 39292bbd64eSDaniel Schwierzeck CONFIG_SYS_INIT_SP_OFFSET 39392bbd64eSDaniel Schwierzeck 39492bbd64eSDaniel Schwierzeck Offset relative to CONFIG_SYS_SDRAM_BASE for initial stack 39592bbd64eSDaniel Schwierzeck pointer. This is needed for the temporary stack before 39692bbd64eSDaniel Schwierzeck relocation. 39792bbd64eSDaniel Schwierzeck 39892bbd64eSDaniel Schwierzeck CONFIG_SYS_MIPS_CACHE_MODE 39992bbd64eSDaniel Schwierzeck 40092bbd64eSDaniel Schwierzeck Cache operation mode for the MIPS CPU. 40192bbd64eSDaniel Schwierzeck See also arch/mips/include/asm/mipsregs.h. 40292bbd64eSDaniel Schwierzeck Possible values are: 40392bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_NO_WA 40492bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_WA 40592bbd64eSDaniel Schwierzeck CONF_CM_UNCACHED 40692bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_NONCOHERENT 40792bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_CE 40892bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_COW 40992bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_CUW 41092bbd64eSDaniel Schwierzeck CONF_CM_CACHABLE_ACCELERATED 41192bbd64eSDaniel Schwierzeck 41292bbd64eSDaniel Schwierzeck CONFIG_SYS_XWAY_EBU_BOOTCFG 41392bbd64eSDaniel Schwierzeck 41492bbd64eSDaniel Schwierzeck Special option for Lantiq XWAY SoCs for booting from NOR flash. 41592bbd64eSDaniel Schwierzeck See also arch/mips/cpu/mips32/start.S. 41692bbd64eSDaniel Schwierzeck 41792bbd64eSDaniel Schwierzeck CONFIG_XWAY_SWAP_BYTES 41892bbd64eSDaniel Schwierzeck 41992bbd64eSDaniel Schwierzeck Enable compilation of tools/xway-swap-bytes needed for Lantiq 42092bbd64eSDaniel Schwierzeck XWAY SoCs for booting from NOR flash. The U-Boot image needs to 42192bbd64eSDaniel Schwierzeck be swapped if a flash programmer is used. 42292bbd64eSDaniel Schwierzeck 4235da627a4Swdenk- Linux Kernel Interface: 424c609719bSwdenk CONFIG_CLOCKS_IN_MHZ 425c609719bSwdenk 426c609719bSwdenk U-Boot stores all clock information in Hz 427c609719bSwdenk internally. For binary compatibility with older Linux 428c609719bSwdenk kernels (which expect the clocks passed in the 429c609719bSwdenk bd_info data to be in MHz) the environment variable 430c609719bSwdenk "clocks_in_mhz" can be defined so that U-Boot 431c609719bSwdenk converts clock data to MHZ before passing it to the 432c609719bSwdenk Linux kernel. 433c609719bSwdenk When CONFIG_CLOCKS_IN_MHZ is defined, a definition of 434c609719bSwdenk "clocks_in_mhz=1" is automatically included in the 435c609719bSwdenk default environment. 436c609719bSwdenk 4375da627a4Swdenk CONFIG_MEMSIZE_IN_BYTES [relevant for MIPS only] 4385da627a4Swdenk 43911ccc33fSMarcel Ziswiler When transferring memsize parameter to linux, some versions 4405da627a4Swdenk expect it to be in bytes, others in MB. 4415da627a4Swdenk Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes. 4425da627a4Swdenk 443fec6d9eeSGerald Van Baren CONFIG_OF_LIBFDT 444f57f70aaSWolfgang Denk 445f57f70aaSWolfgang Denk New kernel versions are expecting firmware settings to be 446213bf8c8SGerald Van Baren passed using flattened device trees (based on open firmware 447213bf8c8SGerald Van Baren concepts). 448213bf8c8SGerald Van Baren 449213bf8c8SGerald Van Baren CONFIG_OF_LIBFDT 450213bf8c8SGerald Van Baren * New libfdt-based support 451213bf8c8SGerald Van Baren * Adds the "fdt" command 4523bb342fcSKim Phillips * The bootm command automatically updates the fdt 453213bf8c8SGerald Van Baren 454b55ae402SMarcel Ziswiler OF_CPU - The proper name of the cpus node (only required for 455b55ae402SMarcel Ziswiler MPC512X and MPC5xxx based boards). 456b55ae402SMarcel Ziswiler OF_SOC - The proper name of the soc node (only required for 457b55ae402SMarcel Ziswiler MPC512X and MPC5xxx based boards). 458f57f70aaSWolfgang Denk OF_TBCLK - The timebase frequency. 459c2871f03SKumar Gala OF_STDOUT_PATH - The path to the console device 460f57f70aaSWolfgang Denk 46111ccc33fSMarcel Ziswiler boards with QUICC Engines require OF_QE to set UCC MAC 46211ccc33fSMarcel Ziswiler addresses 4633bb342fcSKim Phillips 4644e253137SKumar Gala CONFIG_OF_BOARD_SETUP 4654e253137SKumar Gala 4664e253137SKumar Gala Board code has addition modification that it wants to make 4674e253137SKumar Gala to the flat device tree before handing it off to the kernel 4686705d81eSwdenk 4690267768eSMatthew McClintock CONFIG_OF_BOOT_CPU 4700267768eSMatthew McClintock 47111ccc33fSMarcel Ziswiler This define fills in the correct boot CPU in the boot 4720267768eSMatthew McClintock param header, the default value is zero if undefined. 4730267768eSMatthew McClintock 4743887c3fbSHeiko Schocher CONFIG_OF_IDE_FIXUP 4753887c3fbSHeiko Schocher 4763887c3fbSHeiko Schocher U-Boot can detect if an IDE device is present or not. 4773887c3fbSHeiko Schocher If not, and this new config option is activated, U-Boot 4783887c3fbSHeiko Schocher removes the ATA node from the DTS before booting Linux, 4793887c3fbSHeiko Schocher so the Linux IDE driver does not probe the device and 4803887c3fbSHeiko Schocher crash. This is needed for buggy hardware (uc101) where 4813887c3fbSHeiko Schocher no pull down resistor is connected to the signal IDE5V_DD7. 4823887c3fbSHeiko Schocher 4837eb29398SIgor Grinberg CONFIG_MACH_TYPE [relevant for ARM only][mandatory] 4847eb29398SIgor Grinberg 4857eb29398SIgor Grinberg This setting is mandatory for all boards that have only one 4867eb29398SIgor Grinberg machine type and must be used to specify the machine type 4877eb29398SIgor Grinberg number as it appears in the ARM machine registry 4887eb29398SIgor Grinberg (see http://www.arm.linux.org.uk/developer/machines/). 4897eb29398SIgor Grinberg Only boards that have multiple machine types supported 4907eb29398SIgor Grinberg in a single configuration file and the machine type is 4917eb29398SIgor Grinberg runtime discoverable, do not have to use this setting. 4927eb29398SIgor Grinberg 4930b2f4ecaSNiklaus Giger- vxWorks boot parameters: 4940b2f4ecaSNiklaus Giger 4950b2f4ecaSNiklaus Giger bootvx constructs a valid bootline using the following 4960b2f4ecaSNiklaus Giger environments variables: bootfile, ipaddr, serverip, hostname. 4970b2f4ecaSNiklaus Giger It loads the vxWorks image pointed bootfile. 4980b2f4ecaSNiklaus Giger 4990b2f4ecaSNiklaus Giger CONFIG_SYS_VXWORKS_BOOT_DEVICE - The vxworks device name 5000b2f4ecaSNiklaus Giger CONFIG_SYS_VXWORKS_MAC_PTR - Ethernet 6 byte MA -address 5010b2f4ecaSNiklaus Giger CONFIG_SYS_VXWORKS_SERVERNAME - Name of the server 5020b2f4ecaSNiklaus Giger CONFIG_SYS_VXWORKS_BOOT_ADDR - Address of boot parameters 5030b2f4ecaSNiklaus Giger 5040b2f4ecaSNiklaus Giger CONFIG_SYS_VXWORKS_ADD_PARAMS 5050b2f4ecaSNiklaus Giger 5060b2f4ecaSNiklaus Giger Add it at the end of the bootline. E.g "u=username pw=secret" 5070b2f4ecaSNiklaus Giger 5080b2f4ecaSNiklaus Giger Note: If a "bootargs" environment is defined, it will overwride 5090b2f4ecaSNiklaus Giger the defaults discussed just above. 5100b2f4ecaSNiklaus Giger 5112c451f78SAneesh V- Cache Configuration: 5122c451f78SAneesh V CONFIG_SYS_ICACHE_OFF - Do not enable instruction cache in U-Boot 5132c451f78SAneesh V CONFIG_SYS_DCACHE_OFF - Do not enable data cache in U-Boot 5142c451f78SAneesh V CONFIG_SYS_L2CACHE_OFF- Do not enable L2 cache in U-Boot 5152c451f78SAneesh V 51693bc2193SAneesh V- Cache Configuration for ARM: 51793bc2193SAneesh V CONFIG_SYS_L2_PL310 - Enable support for ARM PL310 L2 cache 51893bc2193SAneesh V controller 51993bc2193SAneesh V CONFIG_SYS_PL310_BASE - Physical base address of PL310 52093bc2193SAneesh V controller register space 52193bc2193SAneesh V 5226705d81eSwdenk- Serial Ports: 52348d0192fSAndreas Engel CONFIG_PL010_SERIAL 5246705d81eSwdenk 5256705d81eSwdenk Define this if you want support for Amba PrimeCell PL010 UARTs. 5266705d81eSwdenk 52748d0192fSAndreas Engel CONFIG_PL011_SERIAL 5286705d81eSwdenk 5296705d81eSwdenk Define this if you want support for Amba PrimeCell PL011 UARTs. 5306705d81eSwdenk 5316705d81eSwdenk CONFIG_PL011_CLOCK 5326705d81eSwdenk 5336705d81eSwdenk If you have Amba PrimeCell PL011 UARTs, set this variable to 5346705d81eSwdenk the clock speed of the UARTs. 5356705d81eSwdenk 5366705d81eSwdenk CONFIG_PL01x_PORTS 5376705d81eSwdenk 5386705d81eSwdenk If you have Amba PrimeCell PL010 or PL011 UARTs on your board, 5396705d81eSwdenk define this to a list of base addresses for each (supported) 5406705d81eSwdenk port. See e.g. include/configs/versatile.h 5416705d81eSwdenk 542910f1ae3SJohn Rigby CONFIG_PL011_SERIAL_RLCR 543910f1ae3SJohn Rigby 544910f1ae3SJohn Rigby Some vendor versions of PL011 serial ports (e.g. ST-Ericsson U8500) 545910f1ae3SJohn Rigby have separate receive and transmit line control registers. Set 546910f1ae3SJohn Rigby this variable to initialize the extra register. 547910f1ae3SJohn Rigby 548910f1ae3SJohn Rigby CONFIG_PL011_SERIAL_FLUSH_ON_INIT 549910f1ae3SJohn Rigby 550910f1ae3SJohn Rigby On some platforms (e.g. U8500) U-Boot is loaded by a second stage 551910f1ae3SJohn Rigby boot loader that has already initialized the UART. Define this 552910f1ae3SJohn Rigby variable to flush the UART at init time. 553910f1ae3SJohn Rigby 5546705d81eSwdenk 555c609719bSwdenk- Console Interface: 556c609719bSwdenk Depending on board, define exactly one serial port 557c609719bSwdenk (like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2, 558c609719bSwdenk CONFIG_8xx_CONS_SCC1, ...), or switch off the serial 559c609719bSwdenk console by defining CONFIG_8xx_CONS_NONE 560c609719bSwdenk 561c609719bSwdenk Note: if CONFIG_8xx_CONS_NONE is defined, the serial 562c609719bSwdenk port routines must be defined elsewhere 563c609719bSwdenk (i.e. serial_init(), serial_getc(), ...) 564c609719bSwdenk 565c609719bSwdenk CONFIG_CFB_CONSOLE 566c609719bSwdenk Enables console device for a color framebuffer. Needs following 567c609719bSwdenk defines (cf. smiLynxEM, i8042, board/eltec/bab7xx) 568c609719bSwdenk VIDEO_FB_LITTLE_ENDIAN graphic memory organisation 569c609719bSwdenk (default big endian) 570c609719bSwdenk VIDEO_HW_RECTFILL graphic chip supports 571c609719bSwdenk rectangle fill 572c609719bSwdenk (cf. smiLynxEM) 573c609719bSwdenk VIDEO_HW_BITBLT graphic chip supports 574c609719bSwdenk bit-blit (cf. smiLynxEM) 575c609719bSwdenk VIDEO_VISIBLE_COLS visible pixel columns 576c609719bSwdenk (cols=pitch) 577c609719bSwdenk VIDEO_VISIBLE_ROWS visible pixel rows 578c609719bSwdenk VIDEO_PIXEL_SIZE bytes per pixel 579c609719bSwdenk VIDEO_DATA_FORMAT graphic data format 580c609719bSwdenk (0-5, cf. cfb_console.c) 581c609719bSwdenk VIDEO_FB_ADRS framebuffer address 582c609719bSwdenk VIDEO_KBD_INIT_FCT keyboard int fct 583c609719bSwdenk (i.e. i8042_kbd_init()) 584c609719bSwdenk VIDEO_TSTC_FCT test char fct 585c609719bSwdenk (i.e. i8042_tstc) 586c609719bSwdenk VIDEO_GETC_FCT get char fct 587c609719bSwdenk (i.e. i8042_getc) 588c609719bSwdenk CONFIG_CONSOLE_CURSOR cursor drawing on/off 589c609719bSwdenk (requires blink timer 590c609719bSwdenk cf. i8042.c) 5916d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_CONSOLE_BLINK_COUNT blink interval (cf. i8042.c) 592c609719bSwdenk CONFIG_CONSOLE_TIME display time/date info in 593c609719bSwdenk upper right corner 594602ad3b3SJon Loeliger (requires CONFIG_CMD_DATE) 595c609719bSwdenk CONFIG_VIDEO_LOGO display Linux logo in 596c609719bSwdenk upper left corner 597a6c7ad2fSwdenk CONFIG_VIDEO_BMP_LOGO use bmp_logo.h instead of 598a6c7ad2fSwdenk linux_logo.h for logo. 599a6c7ad2fSwdenk Requires CONFIG_VIDEO_LOGO 600c609719bSwdenk CONFIG_CONSOLE_EXTRA_INFO 60111ccc33fSMarcel Ziswiler additional board info beside 602c609719bSwdenk the logo 603c609719bSwdenk 604c609719bSwdenk When CONFIG_CFB_CONSOLE is defined, video console is 605c609719bSwdenk default i/o. Serial console can be forced with 606c609719bSwdenk environment 'console=serial'. 607c609719bSwdenk 608a3ad8e26Swdenk When CONFIG_SILENT_CONSOLE is defined, all console 609a3ad8e26Swdenk messages (by U-Boot and Linux!) can be silenced with 610a3ad8e26Swdenk the "silent" environment variable. See 611a3ad8e26Swdenk doc/README.silent for more information. 612a3ad8e26Swdenk 613c609719bSwdenk- Console Baudrate: 614c609719bSwdenk CONFIG_BAUDRATE - in bps 615c609719bSwdenk Select one of the baudrates listed in 6166d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_BAUDRATE_TABLE, see below. 6176d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_BRGCLK_PRESCALE, baudrate prescale 618c609719bSwdenk 619c92fac91SHeiko Schocher- Console Rx buffer length 620c92fac91SHeiko Schocher With CONFIG_SYS_SMC_RXBUFLEN it is possible to define 621c92fac91SHeiko Schocher the maximum receive buffer length for the SMC. 6222b3f12c2SHeiko Schocher This option is actual only for 82xx and 8xx possible. 623c92fac91SHeiko Schocher If using CONFIG_SYS_SMC_RXBUFLEN also CONFIG_SYS_MAXIDLE 624c92fac91SHeiko Schocher must be defined, to setup the maximum idle timeout for 625c92fac91SHeiko Schocher the SMC. 626c92fac91SHeiko Schocher 6279558b48aSGraeme Russ- Pre-Console Buffer: 6289558b48aSGraeme Russ Prior to the console being initialised (i.e. serial UART 6299558b48aSGraeme Russ initialised etc) all console output is silently discarded. 6309558b48aSGraeme Russ Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to 6319558b48aSGraeme Russ buffer any console messages prior to the console being 6329558b48aSGraeme Russ initialised to a buffer of size CONFIG_PRE_CON_BUF_SZ 6339558b48aSGraeme Russ bytes located at CONFIG_PRE_CON_BUF_ADDR. The buffer is 6349558b48aSGraeme Russ a circular buffer, so if more than CONFIG_PRE_CON_BUF_SZ 6359558b48aSGraeme Russ bytes are output before the console is initialised, the 6369558b48aSGraeme Russ earlier bytes are discarded. 6379558b48aSGraeme Russ 6389558b48aSGraeme Russ 'Sane' compilers will generate smaller code if 6399558b48aSGraeme Russ CONFIG_PRE_CON_BUF_SZ is a power of 2 6409558b48aSGraeme Russ 641c609719bSwdenk- Boot Delay: CONFIG_BOOTDELAY - in seconds 642c609719bSwdenk Delay before automatically booting the default image; 643c609719bSwdenk set to -1 to disable autoboot. 644c609719bSwdenk 645c609719bSwdenk See doc/README.autoboot for these options that 646c609719bSwdenk work with CONFIG_BOOTDELAY. None are required. 647c609719bSwdenk CONFIG_BOOT_RETRY_TIME 648c609719bSwdenk CONFIG_BOOT_RETRY_MIN 649c609719bSwdenk CONFIG_AUTOBOOT_KEYED 650c609719bSwdenk CONFIG_AUTOBOOT_PROMPT 651c609719bSwdenk CONFIG_AUTOBOOT_DELAY_STR 652c609719bSwdenk CONFIG_AUTOBOOT_STOP_STR 653c609719bSwdenk CONFIG_AUTOBOOT_DELAY_STR2 654c609719bSwdenk CONFIG_AUTOBOOT_STOP_STR2 655c609719bSwdenk CONFIG_ZERO_BOOTDELAY_CHECK 656c609719bSwdenk CONFIG_RESET_TO_RETRY 657c609719bSwdenk 658c609719bSwdenk- Autoboot Command: 659c609719bSwdenk CONFIG_BOOTCOMMAND 660c609719bSwdenk Only needed when CONFIG_BOOTDELAY is enabled; 661c609719bSwdenk define a command string that is automatically executed 662c609719bSwdenk when no character is read on the console interface 663c609719bSwdenk within "Boot Delay" after reset. 664c609719bSwdenk 665c609719bSwdenk CONFIG_BOOTARGS 666c609719bSwdenk This can be used to pass arguments to the bootm 667c609719bSwdenk command. The value of CONFIG_BOOTARGS goes into the 668c609719bSwdenk environment value "bootargs". 669c609719bSwdenk 670c609719bSwdenk CONFIG_RAMBOOT and CONFIG_NFSBOOT 671c609719bSwdenk The value of these goes into the environment as 672c609719bSwdenk "ramboot" and "nfsboot" respectively, and can be used 673c609719bSwdenk as a convenience, when switching between booting from 67411ccc33fSMarcel Ziswiler RAM and NFS. 675c609719bSwdenk 676c609719bSwdenk- Pre-Boot Commands: 677c609719bSwdenk CONFIG_PREBOOT 678c609719bSwdenk 679c609719bSwdenk When this option is #defined, the existence of the 680c609719bSwdenk environment variable "preboot" will be checked 681c609719bSwdenk immediately before starting the CONFIG_BOOTDELAY 682c609719bSwdenk countdown and/or running the auto-boot command resp. 683c609719bSwdenk entering interactive mode. 684c609719bSwdenk 685c609719bSwdenk This feature is especially useful when "preboot" is 686c609719bSwdenk automatically generated or modified. For an example 687c609719bSwdenk see the LWMON board specific code: here "preboot" is 688c609719bSwdenk modified when the user holds down a certain 689c609719bSwdenk combination of keys on the (special) keyboard when 690c609719bSwdenk booting the systems 691c609719bSwdenk 692c609719bSwdenk- Serial Download Echo Mode: 693c609719bSwdenk CONFIG_LOADS_ECHO 694c609719bSwdenk If defined to 1, all characters received during a 695c609719bSwdenk serial download (using the "loads" command) are 696c609719bSwdenk echoed back. This might be needed by some terminal 697c609719bSwdenk emulations (like "cu"), but may as well just take 698c609719bSwdenk time on others. This setting #define's the initial 699c609719bSwdenk value of the "loads_echo" environment variable. 700c609719bSwdenk 701602ad3b3SJon Loeliger- Kgdb Serial Baudrate: (if CONFIG_CMD_KGDB is defined) 702c609719bSwdenk CONFIG_KGDB_BAUDRATE 703c609719bSwdenk Select one of the baudrates listed in 7046d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_BAUDRATE_TABLE, see below. 705c609719bSwdenk 706c609719bSwdenk- Monitor Functions: 707602ad3b3SJon Loeliger Monitor commands can be included or excluded 708602ad3b3SJon Loeliger from the build by using the #include files 709602ad3b3SJon Loeliger "config_cmd_all.h" and #undef'ing unwanted 710602ad3b3SJon Loeliger commands, or using "config_cmd_default.h" 711602ad3b3SJon Loeliger and augmenting with additional #define's 712602ad3b3SJon Loeliger for wanted commands. 713c609719bSwdenk 714602ad3b3SJon Loeliger The default command configuration includes all commands 715602ad3b3SJon Loeliger except those marked below with a "*". 716602ad3b3SJon Loeliger 717602ad3b3SJon Loeliger CONFIG_CMD_ASKENV * ask for env variable 718602ad3b3SJon Loeliger CONFIG_CMD_BDI bdinfo 719602ad3b3SJon Loeliger CONFIG_CMD_BEDBUG * Include BedBug Debugger 720602ad3b3SJon Loeliger CONFIG_CMD_BMP * BMP support 721602ad3b3SJon Loeliger CONFIG_CMD_BSP * Board specific commands 722602ad3b3SJon Loeliger CONFIG_CMD_BOOTD bootd 723602ad3b3SJon Loeliger CONFIG_CMD_CACHE * icache, dcache 724602ad3b3SJon Loeliger CONFIG_CMD_CONSOLE coninfo 725710b9938SMike Frysinger CONFIG_CMD_CRC32 * crc32 726602ad3b3SJon Loeliger CONFIG_CMD_DATE * support for RTC, date/time... 727602ad3b3SJon Loeliger CONFIG_CMD_DHCP * DHCP support 728602ad3b3SJon Loeliger CONFIG_CMD_DIAG * Diagnostics 729a7c93104SPeter Tyser CONFIG_CMD_DS4510 * ds4510 I2C gpio commands 730a7c93104SPeter Tyser CONFIG_CMD_DS4510_INFO * ds4510 I2C info command 731a7c93104SPeter Tyser CONFIG_CMD_DS4510_MEM * ds4510 I2C eeprom/sram commansd 732a7c93104SPeter Tyser CONFIG_CMD_DS4510_RST * ds4510 I2C rst command 733602ad3b3SJon Loeliger CONFIG_CMD_DTT * Digital Therm and Thermostat 734602ad3b3SJon Loeliger CONFIG_CMD_ECHO echo arguments 735246c6922SPeter Tyser CONFIG_CMD_EDITENV edit env variable 736602ad3b3SJon Loeliger CONFIG_CMD_EEPROM * EEPROM read/write support 737602ad3b3SJon Loeliger CONFIG_CMD_ELF * bootelf, bootvx 7380c79cda0SMike Frysinger CONFIG_CMD_EXPORTENV * export the environment 739bdab39d3SMike Frysinger CONFIG_CMD_SAVEENV saveenv 740602ad3b3SJon Loeliger CONFIG_CMD_FDC * Floppy Disk Support 741602ad3b3SJon Loeliger CONFIG_CMD_FAT * FAT partition support 742602ad3b3SJon Loeliger CONFIG_CMD_FDOS * Dos diskette Support 743602ad3b3SJon Loeliger CONFIG_CMD_FLASH flinfo, erase, protect 744602ad3b3SJon Loeliger CONFIG_CMD_FPGA FPGA device initialization support 745a641b979SMike Frysinger CONFIG_CMD_GO * the 'go' command (exec code) 746a000b795SKim Phillips CONFIG_CMD_GREPENV * search environment 747602ad3b3SJon Loeliger CONFIG_CMD_HWFLOW * RTS/CTS hw flow control 748602ad3b3SJon Loeliger CONFIG_CMD_I2C * I2C serial bus support 749602ad3b3SJon Loeliger CONFIG_CMD_IDE * IDE harddisk support 750602ad3b3SJon Loeliger CONFIG_CMD_IMI iminfo 751602ad3b3SJon Loeliger CONFIG_CMD_IMLS List all found images 752602ad3b3SJon Loeliger CONFIG_CMD_IMMAP * IMMR dump support 7530c79cda0SMike Frysinger CONFIG_CMD_IMPORTENV * import an environment 754602ad3b3SJon Loeliger CONFIG_CMD_IRQ * irqinfo 755602ad3b3SJon Loeliger CONFIG_CMD_ITEST Integer/string test of 2 values 756602ad3b3SJon Loeliger CONFIG_CMD_JFFS2 * JFFS2 Support 757602ad3b3SJon Loeliger CONFIG_CMD_KGDB * kgdb 7581ba7fd25SMike Frysinger CONFIG_CMD_LDRINFO ldrinfo (display Blackfin loader) 759602ad3b3SJon Loeliger CONFIG_CMD_LOADB loadb 760602ad3b3SJon Loeliger CONFIG_CMD_LOADS loads 76102c9aa1dSRobin Getz CONFIG_CMD_MD5SUM print md5 message digest 76202c9aa1dSRobin Getz (requires CONFIG_CMD_MEMORY and CONFIG_MD5) 763602ad3b3SJon Loeliger CONFIG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, 76456523f12Swdenk loop, loopw, mtest 765602ad3b3SJon Loeliger CONFIG_CMD_MISC Misc functions like sleep etc 766602ad3b3SJon Loeliger CONFIG_CMD_MMC * MMC memory mapped support 767602ad3b3SJon Loeliger CONFIG_CMD_MII * MII utility commands 76868d7d651SStefan Roese CONFIG_CMD_MTDPARTS * MTD partition support 769602ad3b3SJon Loeliger CONFIG_CMD_NAND * NAND support 770602ad3b3SJon Loeliger CONFIG_CMD_NET bootp, tftpboot, rarpboot 771e92739d3SPeter Tyser CONFIG_CMD_PCA953X * PCA953x I2C gpio commands 772e92739d3SPeter Tyser CONFIG_CMD_PCA953X_INFO * PCA953x I2C gpio info command 773602ad3b3SJon Loeliger CONFIG_CMD_PCI * pciinfo 774602ad3b3SJon Loeliger CONFIG_CMD_PCMCIA * PCMCIA support 775602ad3b3SJon Loeliger CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network 776602ad3b3SJon Loeliger host 777602ad3b3SJon Loeliger CONFIG_CMD_PORTIO * Port I/O 778602ad3b3SJon Loeliger CONFIG_CMD_REGINFO * Register dump 779602ad3b3SJon Loeliger CONFIG_CMD_RUN run command in env variable 780602ad3b3SJon Loeliger CONFIG_CMD_SAVES * save S record dump 781602ad3b3SJon Loeliger CONFIG_CMD_SCSI * SCSI Support 782602ad3b3SJon Loeliger CONFIG_CMD_SDRAM * print SDRAM configuration information 783602ad3b3SJon Loeliger (requires CONFIG_CMD_I2C) 784602ad3b3SJon Loeliger CONFIG_CMD_SETGETDCR Support for DCR Register access 785602ad3b3SJon Loeliger (4xx only) 786c6b1ee66SAlexander Holler CONFIG_CMD_SHA1SUM print sha1 memory digest 78702c9aa1dSRobin Getz (requires CONFIG_CMD_MEMORY) 78874de7aefSWolfgang Denk CONFIG_CMD_SOURCE "source" command Support 789602ad3b3SJon Loeliger CONFIG_CMD_SPI * SPI serial bus support 7907a83af07SLuca Ceresoli CONFIG_CMD_TFTPSRV * TFTP transfer in server mode 7911fb7cd49SSimon Glass CONFIG_CMD_TFTPPUT * TFTP put command (upload) 792ca366d0eSChe-liang Chiou CONFIG_CMD_TIME * run command and report execution time 793602ad3b3SJon Loeliger CONFIG_CMD_USB * USB support 794602ad3b3SJon Loeliger CONFIG_CMD_CDP * Cisco Discover Protocol support 795602ad3b3SJon Loeliger CONFIG_CMD_FSL * Microblaze FSL support 796c609719bSwdenk 797c609719bSwdenk 798c609719bSwdenk EXAMPLE: If you want all functions except of network 799c609719bSwdenk support you can write: 800c609719bSwdenk 801602ad3b3SJon Loeliger #include "config_cmd_all.h" 802602ad3b3SJon Loeliger #undef CONFIG_CMD_NET 803c609719bSwdenk 804213bf8c8SGerald Van Baren Other Commands: 805213bf8c8SGerald Van Baren fdt (flattened device tree) command: CONFIG_OF_LIBFDT 806c609719bSwdenk 807c609719bSwdenk Note: Don't enable the "icache" and "dcache" commands 808602ad3b3SJon Loeliger (configuration option CONFIG_CMD_CACHE) unless you know 809c609719bSwdenk what you (and your U-Boot users) are doing. Data 810c609719bSwdenk cache cannot be enabled on systems like the 8xx or 811c609719bSwdenk 8260 (where accesses to the IMMR region must be 812c609719bSwdenk uncached), and it cannot be disabled on all other 813c609719bSwdenk systems where we (mis-) use the data cache to hold an 814c609719bSwdenk initial stack and some data. 815c609719bSwdenk 816c609719bSwdenk 817c609719bSwdenk XXX - this list needs to get updated! 818c609719bSwdenk 81945ba8077SSimon Glass- Device tree: 82045ba8077SSimon Glass CONFIG_OF_CONTROL 82145ba8077SSimon Glass If this variable is defined, U-Boot will use a device tree 82245ba8077SSimon Glass to configure its devices, instead of relying on statically 82345ba8077SSimon Glass compiled #defines in the board file. This option is 82445ba8077SSimon Glass experimental and only available on a few boards. The device 82545ba8077SSimon Glass tree is available in the global data as gd->fdt_blob. 82645ba8077SSimon Glass 8272c0f79e4SSimon Glass U-Boot needs to get its device tree from somewhere. This can 8282c0f79e4SSimon Glass be done using one of the two options below: 829bbb0b128SSimon Glass 830bbb0b128SSimon Glass CONFIG_OF_EMBED 831bbb0b128SSimon Glass If this variable is defined, U-Boot will embed a device tree 832bbb0b128SSimon Glass binary in its image. This device tree file should be in the 833bbb0b128SSimon Glass board directory and called <soc>-<board>.dts. The binary file 834bbb0b128SSimon Glass is then picked up in board_init_f() and made available through 835bbb0b128SSimon Glass the global data structure as gd->blob. 83645ba8077SSimon Glass 8372c0f79e4SSimon Glass CONFIG_OF_SEPARATE 8382c0f79e4SSimon Glass If this variable is defined, U-Boot will build a device tree 8392c0f79e4SSimon Glass binary. It will be called u-boot.dtb. Architecture-specific 8402c0f79e4SSimon Glass code will locate it at run-time. Generally this works by: 8412c0f79e4SSimon Glass 8422c0f79e4SSimon Glass cat u-boot.bin u-boot.dtb >image.bin 8432c0f79e4SSimon Glass 8442c0f79e4SSimon Glass and in fact, U-Boot does this for you, creating a file called 8452c0f79e4SSimon Glass u-boot-dtb.bin which is useful in the common case. You can 8462c0f79e4SSimon Glass still use the individual files if you need something more 8472c0f79e4SSimon Glass exotic. 8482c0f79e4SSimon Glass 849c609719bSwdenk- Watchdog: 850c609719bSwdenk CONFIG_WATCHDOG 851c609719bSwdenk If this variable is defined, it enables watchdog 8526abe6fb6SDetlev Zundel support for the SoC. There must be support in the SoC 8536abe6fb6SDetlev Zundel specific code for a watchdog. For the 8xx and 8260 8546abe6fb6SDetlev Zundel CPUs, the SIU Watchdog feature is enabled in the SYPCR 8556abe6fb6SDetlev Zundel register. When supported for a specific SoC is 8566abe6fb6SDetlev Zundel available, then no further board specific code should 8576abe6fb6SDetlev Zundel be needed to use it. 8586abe6fb6SDetlev Zundel 8596abe6fb6SDetlev Zundel CONFIG_HW_WATCHDOG 8606abe6fb6SDetlev Zundel When using a watchdog circuitry external to the used 8616abe6fb6SDetlev Zundel SoC, then define this variable and provide board 8626abe6fb6SDetlev Zundel specific code for the "hw_watchdog_reset" function. 863c609719bSwdenk 864c1551ea8Sstroese- U-Boot Version: 865c1551ea8Sstroese CONFIG_VERSION_VARIABLE 866c1551ea8Sstroese If this variable is defined, an environment variable 867c1551ea8Sstroese named "ver" is created by U-Boot showing the U-Boot 868c1551ea8Sstroese version as printed by the "version" command. 869c1551ea8Sstroese This variable is readonly. 870c1551ea8Sstroese 871c609719bSwdenk- Real-Time Clock: 872c609719bSwdenk 873602ad3b3SJon Loeliger When CONFIG_CMD_DATE is selected, the type of the RTC 874c609719bSwdenk has to be selected, too. Define exactly one of the 875c609719bSwdenk following options: 876c609719bSwdenk 877c609719bSwdenk CONFIG_RTC_MPC8xx - use internal RTC of MPC8xx 878c609719bSwdenk CONFIG_RTC_PCF8563 - use Philips PCF8563 RTC 8797ce63709SGuennadi Liakhovetski CONFIG_RTC_MC13783 - use MC13783 RTC 880c609719bSwdenk CONFIG_RTC_MC146818 - use MC146818 RTC 8811cb8e980Swdenk CONFIG_RTC_DS1307 - use Maxim, Inc. DS1307 RTC 882c609719bSwdenk CONFIG_RTC_DS1337 - use Maxim, Inc. DS1337 RTC 8837f70e853Swdenk CONFIG_RTC_DS1338 - use Maxim, Inc. DS1338 RTC 8843bac3513Swdenk CONFIG_RTC_DS164x - use Dallas DS164x RTC 8859536dfccSTor Krill CONFIG_RTC_ISL1208 - use Intersil ISL1208 RTC 8864c0d4c3bSwdenk CONFIG_RTC_MAX6900 - use Maxim, Inc. MAX6900 RTC 8876d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_RTC_DS1337_NOOSC - Turn off the OSC output for DS1337 88871d19f30SHeiko Schocher CONFIG_SYS_RV3029_TCR - enable trickle charger on 88971d19f30SHeiko Schocher RV3029 RTC. 890c609719bSwdenk 891b37c7e5eSwdenk Note that if the RTC uses I2C, then the I2C interface 892b37c7e5eSwdenk must also be configured. See I2C Support, below. 893b37c7e5eSwdenk 894e92739d3SPeter Tyser- GPIO Support: 895e92739d3SPeter Tyser CONFIG_PCA953X - use NXP's PCA953X series I2C GPIO 896e92739d3SPeter Tyser CONFIG_PCA953X_INFO - enable pca953x info command 897e92739d3SPeter Tyser 8985dec49caSChris Packham The CONFIG_SYS_I2C_PCA953X_WIDTH option specifies a list of 8995dec49caSChris Packham chip-ngpio pairs that tell the PCA953X driver the number of 9005dec49caSChris Packham pins supported by a particular chip. 9015dec49caSChris Packham 902e92739d3SPeter Tyser Note that if the GPIO device uses I2C, then the I2C interface 903e92739d3SPeter Tyser must also be configured. See I2C Support, below. 904e92739d3SPeter Tyser 905c609719bSwdenk- Timestamp Support: 906c609719bSwdenk 907c609719bSwdenk When CONFIG_TIMESTAMP is selected, the timestamp 908c609719bSwdenk (date and time) of an image is printed by image 909c609719bSwdenk commands like bootm or iminfo. This option is 910602ad3b3SJon Loeliger automatically enabled when you select CONFIG_CMD_DATE . 911c609719bSwdenk 912c609719bSwdenk- Partition Support: 913c609719bSwdenk CONFIG_MAC_PARTITION and/or CONFIG_DOS_PARTITION 91407f3d789Srichardretanubun and/or CONFIG_ISO_PARTITION and/or CONFIG_EFI_PARTITION 915c609719bSwdenk 916602ad3b3SJon Loeliger If IDE or SCSI support is enabled (CONFIG_CMD_IDE or 917218ca724SWolfgang Denk CONFIG_CMD_SCSI) you must configure support for at 918218ca724SWolfgang Denk least one partition type as well. 919c609719bSwdenk 920c609719bSwdenk- IDE Reset method: 9214d13cbadSwdenk CONFIG_IDE_RESET_ROUTINE - this is defined in several 9224d13cbadSwdenk board configurations files but used nowhere! 923c609719bSwdenk 9244d13cbadSwdenk CONFIG_IDE_RESET - is this is defined, IDE Reset will 9254d13cbadSwdenk be performed by calling the function 9264d13cbadSwdenk ide_set_reset(int reset) 9274d13cbadSwdenk which has to be defined in a board specific file 928c609719bSwdenk 929c609719bSwdenk- ATAPI Support: 930c609719bSwdenk CONFIG_ATAPI 931c609719bSwdenk 932c609719bSwdenk Set this to enable ATAPI support. 933c609719bSwdenk 934c40b2956Swdenk- LBA48 Support 935c40b2956Swdenk CONFIG_LBA48 936c40b2956Swdenk 937c40b2956Swdenk Set this to enable support for disks larger than 137GB 9384b142febSHeiko Schocher Also look at CONFIG_SYS_64BIT_LBA. 939c40b2956Swdenk Whithout these , LBA48 support uses 32bit variables and will 'only' 940c40b2956Swdenk support disks up to 2.1TB. 941c40b2956Swdenk 9426d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_64BIT_LBA: 943c40b2956Swdenk When enabled, makes the IDE subsystem use 64bit sector addresses. 944c40b2956Swdenk Default is 32bit. 945c40b2956Swdenk 946c609719bSwdenk- SCSI Support: 947c609719bSwdenk At the moment only there is only support for the 948c609719bSwdenk SYM53C8XX SCSI controller; define 949c609719bSwdenk CONFIG_SCSI_SYM53C8XX to enable it. 950c609719bSwdenk 9516d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SCSI_MAX_LUN [8], CONFIG_SYS_SCSI_MAX_SCSI_ID [7] and 9526d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SCSI_MAX_DEVICE [CONFIG_SYS_SCSI_MAX_SCSI_ID * 9536d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SCSI_MAX_LUN] can be adjusted to define the 954c609719bSwdenk maximum numbers of LUNs, SCSI ID's and target 955c609719bSwdenk devices. 9566d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz) 957c609719bSwdenk 958c609719bSwdenk- NETWORK Support (PCI): 959682011ffSwdenk CONFIG_E1000 960682011ffSwdenk Support for Intel 8254x gigabit chips. 961682011ffSwdenk 962ac3315c2SAndre Schwarz CONFIG_E1000_FALLBACK_MAC 96311ccc33fSMarcel Ziswiler default MAC for empty EEPROM after production. 964ac3315c2SAndre Schwarz 965c609719bSwdenk CONFIG_EEPRO100 966c609719bSwdenk Support for Intel 82557/82559/82559ER chips. 96711ccc33fSMarcel Ziswiler Optional CONFIG_EEPRO100_SROM_WRITE enables EEPROM 968c609719bSwdenk write routine for first time initialisation. 969c609719bSwdenk 970c609719bSwdenk CONFIG_TULIP 971c609719bSwdenk Support for Digital 2114x chips. 972c609719bSwdenk Optional CONFIG_TULIP_SELECT_MEDIA for board specific 973c609719bSwdenk modem chip initialisation (KS8761/QS6611). 974c609719bSwdenk 975c609719bSwdenk CONFIG_NATSEMI 976c609719bSwdenk Support for National dp83815 chips. 977c609719bSwdenk 978c609719bSwdenk CONFIG_NS8382X 979c609719bSwdenk Support for National dp8382[01] gigabit chips. 980c609719bSwdenk 98145219c46Swdenk- NETWORK Support (other): 98245219c46Swdenk 983c041e9d2SJens Scharsig CONFIG_DRIVER_AT91EMAC 984c041e9d2SJens Scharsig Support for AT91RM9200 EMAC. 985c041e9d2SJens Scharsig 986c041e9d2SJens Scharsig CONFIG_RMII 987c041e9d2SJens Scharsig Define this to use reduced MII inteface 988c041e9d2SJens Scharsig 989c041e9d2SJens Scharsig CONFIG_DRIVER_AT91EMAC_QUIET 990c041e9d2SJens Scharsig If this defined, the driver is quiet. 991c041e9d2SJens Scharsig The driver doen't show link status messages. 992c041e9d2SJens Scharsig 99345219c46Swdenk CONFIG_DRIVER_LAN91C96 99445219c46Swdenk Support for SMSC's LAN91C96 chips. 99545219c46Swdenk 99645219c46Swdenk CONFIG_LAN91C96_BASE 99745219c46Swdenk Define this to hold the physical address 99845219c46Swdenk of the LAN91C96's I/O space 99945219c46Swdenk 100045219c46Swdenk CONFIG_LAN91C96_USE_32_BIT 100145219c46Swdenk Define this to enable 32 bit addressing 100245219c46Swdenk 1003f39748aeSwdenk CONFIG_DRIVER_SMC91111 1004f39748aeSwdenk Support for SMSC's LAN91C111 chip 1005f39748aeSwdenk 1006f39748aeSwdenk CONFIG_SMC91111_BASE 1007f39748aeSwdenk Define this to hold the physical address 1008f39748aeSwdenk of the device (I/O space) 1009f39748aeSwdenk 1010f39748aeSwdenk CONFIG_SMC_USE_32_BIT 1011f39748aeSwdenk Define this if data bus is 32 bits 1012f39748aeSwdenk 1013f39748aeSwdenk CONFIG_SMC_USE_IOFUNCS 1014f39748aeSwdenk Define this to use i/o functions instead of macros 1015f39748aeSwdenk (some hardware wont work with macros) 1016f39748aeSwdenk 1017b3dbf4a5SMacpaul Lin CONFIG_FTGMAC100 1018b3dbf4a5SMacpaul Lin Support for Faraday's FTGMAC100 Gigabit SoC Ethernet 1019b3dbf4a5SMacpaul Lin 1020b3dbf4a5SMacpaul Lin CONFIG_FTGMAC100_EGIGA 1021b3dbf4a5SMacpaul Lin Define this to use GE link update with gigabit PHY. 1022b3dbf4a5SMacpaul Lin Define this if FTGMAC100 is connected to gigabit PHY. 1023b3dbf4a5SMacpaul Lin If your system has 10/100 PHY only, it might not occur 1024b3dbf4a5SMacpaul Lin wrong behavior. Because PHY usually return timeout or 1025b3dbf4a5SMacpaul Lin useless data when polling gigabit status and gigabit 1026b3dbf4a5SMacpaul Lin control registers. This behavior won't affect the 1027b3dbf4a5SMacpaul Lin correctnessof 10/100 link speed update. 1028b3dbf4a5SMacpaul Lin 1029c2fff331SMike Rapoport CONFIG_SMC911X 1030557b377dSJens Gehrlein Support for SMSC's LAN911x and LAN921x chips 1031557b377dSJens Gehrlein 1032c2fff331SMike Rapoport CONFIG_SMC911X_BASE 1033557b377dSJens Gehrlein Define this to hold the physical address 1034557b377dSJens Gehrlein of the device (I/O space) 1035557b377dSJens Gehrlein 1036c2fff331SMike Rapoport CONFIG_SMC911X_32_BIT 1037557b377dSJens Gehrlein Define this if data bus is 32 bits 1038557b377dSJens Gehrlein 1039c2fff331SMike Rapoport CONFIG_SMC911X_16_BIT 1040557b377dSJens Gehrlein Define this if data bus is 16 bits. If your processor 1041557b377dSJens Gehrlein automatically converts one 32 bit word to two 16 bit 1042c2fff331SMike Rapoport words you may also try CONFIG_SMC911X_32_BIT. 1043557b377dSJens Gehrlein 10443d0075faSYoshihiro Shimoda CONFIG_SH_ETHER 10453d0075faSYoshihiro Shimoda Support for Renesas on-chip Ethernet controller 10463d0075faSYoshihiro Shimoda 10473d0075faSYoshihiro Shimoda CONFIG_SH_ETHER_USE_PORT 10483d0075faSYoshihiro Shimoda Define the number of ports to be used 10493d0075faSYoshihiro Shimoda 10503d0075faSYoshihiro Shimoda CONFIG_SH_ETHER_PHY_ADDR 10513d0075faSYoshihiro Shimoda Define the ETH PHY's address 10523d0075faSYoshihiro Shimoda 105368260aabSYoshihiro Shimoda CONFIG_SH_ETHER_CACHE_WRITEBACK 105468260aabSYoshihiro Shimoda If this option is set, the driver enables cache flush. 105568260aabSYoshihiro Shimoda 1056c609719bSwdenk- USB Support: 1057c609719bSwdenk At the moment only the UHCI host controller is 10584d13cbadSwdenk supported (PIP405, MIP405, MPC5200); define 1059c609719bSwdenk CONFIG_USB_UHCI to enable it. 1060c609719bSwdenk define CONFIG_USB_KEYBOARD to enable the USB Keyboard 106130d56faeSwdenk and define CONFIG_USB_STORAGE to enable the USB 1062c609719bSwdenk storage devices. 1063c609719bSwdenk Note: 1064c609719bSwdenk Supported are USB Keyboards and USB Floppy drives 1065c609719bSwdenk (TEAC FD-05PUB). 10664d13cbadSwdenk MPC5200 USB requires additional defines: 10674d13cbadSwdenk CONFIG_USB_CLOCK 10684d13cbadSwdenk for 528 MHz Clock: 0x0001bbbb 1069307ecb6dSEric Millbrandt CONFIG_PSC3_USB 1070307ecb6dSEric Millbrandt for USB on PSC3 10714d13cbadSwdenk CONFIG_USB_CONFIG 10724d13cbadSwdenk for differential drivers: 0x00001000 10734d13cbadSwdenk for single ended drivers: 0x00005000 1074307ecb6dSEric Millbrandt for differential drivers on PSC3: 0x00000100 1075307ecb6dSEric Millbrandt for single ended drivers on PSC3: 0x00004100 10766d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_USB_EVENT_POLL 1077fdcfaa1bSZhang Wei May be defined to allow interrupt polling 1078fdcfaa1bSZhang Wei instead of using asynchronous interrupts 10794d13cbadSwdenk 108016c8d5e7SWolfgang Denk- USB Device: 108116c8d5e7SWolfgang Denk Define the below if you wish to use the USB console. 108216c8d5e7SWolfgang Denk Once firmware is rebuilt from a serial console issue the 108316c8d5e7SWolfgang Denk command "setenv stdin usbtty; setenv stdout usbtty" and 108411ccc33fSMarcel Ziswiler attach your USB cable. The Unix command "dmesg" should print 108516c8d5e7SWolfgang Denk it has found a new device. The environment variable usbtty 108616c8d5e7SWolfgang Denk can be set to gserial or cdc_acm to enable your device to 108716c8d5e7SWolfgang Denk appear to a USB host as a Linux gserial device or a 108816c8d5e7SWolfgang Denk Common Device Class Abstract Control Model serial device. 108916c8d5e7SWolfgang Denk If you select usbtty = gserial you should be able to enumerate 109016c8d5e7SWolfgang Denk a Linux host by 109116c8d5e7SWolfgang Denk # modprobe usbserial vendor=0xVendorID product=0xProductID 109216c8d5e7SWolfgang Denk else if using cdc_acm, simply setting the environment 109316c8d5e7SWolfgang Denk variable usbtty to be cdc_acm should suffice. The following 109416c8d5e7SWolfgang Denk might be defined in YourBoardName.h 109516c8d5e7SWolfgang Denk 109616c8d5e7SWolfgang Denk CONFIG_USB_DEVICE 109716c8d5e7SWolfgang Denk Define this to build a UDC device 109816c8d5e7SWolfgang Denk 109916c8d5e7SWolfgang Denk CONFIG_USB_TTY 110016c8d5e7SWolfgang Denk Define this to have a tty type of device available to 110116c8d5e7SWolfgang Denk talk to the UDC device 110216c8d5e7SWolfgang Denk 11036d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_CONSOLE_IS_IN_ENV 110416c8d5e7SWolfgang Denk Define this if you want stdin, stdout &/or stderr to 110516c8d5e7SWolfgang Denk be set to usbtty. 110616c8d5e7SWolfgang Denk 110716c8d5e7SWolfgang Denk mpc8xx: 11086d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_USB_EXTC_CLK 0xBLAH 110916c8d5e7SWolfgang Denk Derive USB clock from external clock "blah" 11106d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_USB_EXTC_CLK 0x02 111116c8d5e7SWolfgang Denk 11126d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_USB_BRG_CLK 0xBLAH 111316c8d5e7SWolfgang Denk Derive USB clock from brgclk 11146d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_USB_BRG_CLK 0x04 111516c8d5e7SWolfgang Denk 111616c8d5e7SWolfgang Denk If you have a USB-IF assigned VendorID then you may wish to 111716c8d5e7SWolfgang Denk define your own vendor specific values either in BoardName.h 111816c8d5e7SWolfgang Denk or directly in usbd_vendor_info.h. If you don't define 111916c8d5e7SWolfgang Denk CONFIG_USBD_MANUFACTURER, CONFIG_USBD_PRODUCT_NAME, 112016c8d5e7SWolfgang Denk CONFIG_USBD_VENDORID and CONFIG_USBD_PRODUCTID, then U-Boot 112116c8d5e7SWolfgang Denk should pretend to be a Linux device to it's target host. 112216c8d5e7SWolfgang Denk 112316c8d5e7SWolfgang Denk CONFIG_USBD_MANUFACTURER 112416c8d5e7SWolfgang Denk Define this string as the name of your company for 112516c8d5e7SWolfgang Denk - CONFIG_USBD_MANUFACTURER "my company" 112616c8d5e7SWolfgang Denk 112716c8d5e7SWolfgang Denk CONFIG_USBD_PRODUCT_NAME 112816c8d5e7SWolfgang Denk Define this string as the name of your product 112916c8d5e7SWolfgang Denk - CONFIG_USBD_PRODUCT_NAME "acme usb device" 113016c8d5e7SWolfgang Denk 113116c8d5e7SWolfgang Denk CONFIG_USBD_VENDORID 113216c8d5e7SWolfgang Denk Define this as your assigned Vendor ID from the USB 113316c8d5e7SWolfgang Denk Implementors Forum. This *must* be a genuine Vendor ID 113416c8d5e7SWolfgang Denk to avoid polluting the USB namespace. 113516c8d5e7SWolfgang Denk - CONFIG_USBD_VENDORID 0xFFFF 113616c8d5e7SWolfgang Denk 113716c8d5e7SWolfgang Denk CONFIG_USBD_PRODUCTID 113816c8d5e7SWolfgang Denk Define this as the unique Product ID 113916c8d5e7SWolfgang Denk for your device 114016c8d5e7SWolfgang Denk - CONFIG_USBD_PRODUCTID 0xFFFF 1141c609719bSwdenk 1142c609719bSwdenk 1143c609719bSwdenk- MMC Support: 1144c609719bSwdenk The MMC controller on the Intel PXA is supported. To 1145c609719bSwdenk enable this define CONFIG_MMC. The MMC can be 1146c609719bSwdenk accessed from the boot prompt by mapping the device 1147c609719bSwdenk to physical memory similar to flash. Command line is 1148602ad3b3SJon Loeliger enabled with CONFIG_CMD_MMC. The MMC driver also works with 1149602ad3b3SJon Loeliger the FAT fs. This is enabled with CONFIG_CMD_FAT. 1150c609719bSwdenk 1151afb35666SYoshihiro Shimoda CONFIG_SH_MMCIF 1152afb35666SYoshihiro Shimoda Support for Renesas on-chip MMCIF controller 1153afb35666SYoshihiro Shimoda 1154afb35666SYoshihiro Shimoda CONFIG_SH_MMCIF_ADDR 1155afb35666SYoshihiro Shimoda Define the base address of MMCIF registers 1156afb35666SYoshihiro Shimoda 1157afb35666SYoshihiro Shimoda CONFIG_SH_MMCIF_CLK 1158afb35666SYoshihiro Shimoda Define the clock frequency for MMCIF 1159afb35666SYoshihiro Shimoda 11606705d81eSwdenk- Journaling Flash filesystem support: 11616705d81eSwdenk CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE, 11626705d81eSwdenk CONFIG_JFFS2_NAND_DEV 11636705d81eSwdenk Define these for a default partition on a NAND device 11646705d81eSwdenk 11656d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_JFFS2_FIRST_SECTOR, 11666d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_JFFS2_FIRST_BANK, CONFIG_SYS_JFFS2_NUM_BANKS 11676705d81eSwdenk Define these for a default partition on a NOR device 11686705d81eSwdenk 11696d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_JFFS_CUSTOM_PART 11706705d81eSwdenk Define this to create an own partition. You have to provide a 11716705d81eSwdenk function struct part_info* jffs2_part_info(int part_num) 11726705d81eSwdenk 11736705d81eSwdenk If you define only one JFFS2 partition you may also want to 11746d0f6bcfSJean-Christophe PLAGNIOL-VILLARD #define CONFIG_SYS_JFFS_SINGLE_PART 1 11756705d81eSwdenk to disable the command chpart. This is the default when you 11766705d81eSwdenk have not defined a custom partition 11776705d81eSwdenk 1178c30a15e5SDonggeun Kim- FAT(File Allocation Table) filesystem write function support: 1179c30a15e5SDonggeun Kim CONFIG_FAT_WRITE 1180c30a15e5SDonggeun Kim Support for saving memory data as a file 1181c30a15e5SDonggeun Kim in FAT formatted partition 1182c30a15e5SDonggeun Kim 1183c609719bSwdenk- Keyboard Support: 1184c609719bSwdenk CONFIG_ISA_KEYBOARD 1185c609719bSwdenk 1186c609719bSwdenk Define this to enable standard (PC-Style) keyboard 1187c609719bSwdenk support 1188c609719bSwdenk 1189c609719bSwdenk CONFIG_I8042_KBD 1190c609719bSwdenk Standard PC keyboard driver with US (is default) and 1191c609719bSwdenk GERMAN key layout (switch via environment 'keymap=de') support. 1192c609719bSwdenk Export function i8042_kbd_init, i8042_tstc and i8042_getc 1193c609719bSwdenk for cfb_console. Supports cursor blinking. 1194c609719bSwdenk 1195c609719bSwdenk- Video support: 1196c609719bSwdenk CONFIG_VIDEO 1197c609719bSwdenk 1198c609719bSwdenk Define this to enable video support (for output to 1199c609719bSwdenk video). 1200c609719bSwdenk 1201c609719bSwdenk CONFIG_VIDEO_CT69000 1202c609719bSwdenk 1203c609719bSwdenk Enable Chips & Technologies 69000 Video chip 1204c609719bSwdenk 1205c609719bSwdenk CONFIG_VIDEO_SMI_LYNXEM 1206eeb1b77bSwdenk Enable Silicon Motion SMI 712/710/810 Video chip. The 1207eeb1b77bSwdenk video output is selected via environment 'videoout' 1208eeb1b77bSwdenk (1 = LCD and 2 = CRT). If videoout is undefined, CRT is 1209eeb1b77bSwdenk assumed. 1210c609719bSwdenk 1211eeb1b77bSwdenk For the CT69000 and SMI_LYNXEM drivers, videomode is 121211ccc33fSMarcel Ziswiler selected via environment 'videomode'. Two different ways 1213eeb1b77bSwdenk are possible: 1214eeb1b77bSwdenk - "videomode=num" 'num' is a standard LiLo mode numbers. 1215eeb1b77bSwdenk Following standard modes are supported (* is default): 1216eeb1b77bSwdenk 1217eeb1b77bSwdenk Colors 640x480 800x600 1024x768 1152x864 1280x1024 1218eeb1b77bSwdenk -------------+--------------------------------------------- 1219eeb1b77bSwdenk 8 bits | 0x301* 0x303 0x305 0x161 0x307 1220eeb1b77bSwdenk 15 bits | 0x310 0x313 0x316 0x162 0x319 1221eeb1b77bSwdenk 16 bits | 0x311 0x314 0x317 0x163 0x31A 1222eeb1b77bSwdenk 24 bits | 0x312 0x315 0x318 ? 0x31B 1223eeb1b77bSwdenk -------------+--------------------------------------------- 1224c609719bSwdenk (i.e. setenv videomode 317; saveenv; reset;) 1225c609719bSwdenk 1226eeb1b77bSwdenk - "videomode=bootargs" all the video parameters are parsed 12277817cb20SMarcel Ziswiler from the bootargs. (See drivers/video/videomodes.c) 1228eeb1b77bSwdenk 1229eeb1b77bSwdenk 1230a6c7ad2fSwdenk CONFIG_VIDEO_SED13806 1231a6c7ad2fSwdenk Enable Epson SED13806 driver. This driver supports 8bpp 1232a6c7ad2fSwdenk and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP 1233a6c7ad2fSwdenk or CONFIG_VIDEO_SED13806_16BPP 1234a6c7ad2fSwdenk 12357d3053fbSTimur Tabi CONFIG_FSL_DIU_FB 12367d3053fbSTimur Tabi Enable the Freescale DIU video driver. Reference boards for 12377d3053fbSTimur Tabi SOCs that have a DIU should define this macro to enable DIU 12387d3053fbSTimur Tabi support, and should also define these other macros: 12397d3053fbSTimur Tabi 12407d3053fbSTimur Tabi CONFIG_SYS_DIU_ADDR 12417d3053fbSTimur Tabi CONFIG_VIDEO 12427d3053fbSTimur Tabi CONFIG_CMD_BMP 12437d3053fbSTimur Tabi CONFIG_CFB_CONSOLE 12447d3053fbSTimur Tabi CONFIG_VIDEO_SW_CURSOR 12457d3053fbSTimur Tabi CONFIG_VGA_AS_SINGLE_DEVICE 12467d3053fbSTimur Tabi CONFIG_VIDEO_LOGO 12477d3053fbSTimur Tabi CONFIG_VIDEO_BMP_LOGO 12487d3053fbSTimur Tabi 1249ba8e76bdSTimur Tabi The DIU driver will look for the 'video-mode' environment 1250ba8e76bdSTimur Tabi variable, and if defined, enable the DIU as a console during 1251ba8e76bdSTimur Tabi boot. See the documentation file README.video for a 1252ba8e76bdSTimur Tabi description of this variable. 12537d3053fbSTimur Tabi 1254682011ffSwdenk- Keyboard Support: 1255682011ffSwdenk CONFIG_KEYBOARD 1256682011ffSwdenk 1257682011ffSwdenk Define this to enable a custom keyboard support. 1258682011ffSwdenk This simply calls drv_keyboard_init() which must be 1259682011ffSwdenk defined in your board-specific files. 1260682011ffSwdenk The only board using this so far is RBC823. 1261a6c7ad2fSwdenk 1262c609719bSwdenk- LCD Support: CONFIG_LCD 1263c609719bSwdenk 1264c609719bSwdenk Define this to enable LCD support (for output to LCD 1265c609719bSwdenk display); also select one of the supported displays 1266c609719bSwdenk by defining one of these: 1267c609719bSwdenk 126839cf4804SStelian Pop CONFIG_ATMEL_LCD: 126939cf4804SStelian Pop 127039cf4804SStelian Pop HITACHI TX09D70VM1CCA, 3.5", 240x320. 127139cf4804SStelian Pop 1272fd3103bbSwdenk CONFIG_NEC_NL6448AC33: 1273c609719bSwdenk 1274fd3103bbSwdenk NEC NL6448AC33-18. Active, color, single scan. 1275c609719bSwdenk 1276fd3103bbSwdenk CONFIG_NEC_NL6448BC20 1277c609719bSwdenk 1278fd3103bbSwdenk NEC NL6448BC20-08. 6.5", 640x480. 1279fd3103bbSwdenk Active, color, single scan. 1280fd3103bbSwdenk 1281fd3103bbSwdenk CONFIG_NEC_NL6448BC33_54 1282fd3103bbSwdenk 1283fd3103bbSwdenk NEC NL6448BC33-54. 10.4", 640x480. 1284c609719bSwdenk Active, color, single scan. 1285c609719bSwdenk 1286c609719bSwdenk CONFIG_SHARP_16x9 1287c609719bSwdenk 1288c609719bSwdenk Sharp 320x240. Active, color, single scan. 1289c609719bSwdenk It isn't 16x9, and I am not sure what it is. 1290c609719bSwdenk 1291c609719bSwdenk CONFIG_SHARP_LQ64D341 1292c609719bSwdenk 1293c609719bSwdenk Sharp LQ64D341 display, 640x480. 1294c609719bSwdenk Active, color, single scan. 1295c609719bSwdenk 1296c609719bSwdenk CONFIG_HLD1045 1297c609719bSwdenk 1298c609719bSwdenk HLD1045 display, 640x480. 1299c609719bSwdenk Active, color, single scan. 1300c609719bSwdenk 1301c609719bSwdenk CONFIG_OPTREX_BW 1302c609719bSwdenk 1303c609719bSwdenk Optrex CBL50840-2 NF-FW 99 22 M5 1304c609719bSwdenk or 1305c609719bSwdenk Hitachi LMG6912RPFC-00T 1306c609719bSwdenk or 1307c609719bSwdenk Hitachi SP14Q002 1308c609719bSwdenk 1309c609719bSwdenk 320x240. Black & white. 1310c609719bSwdenk 1311c609719bSwdenk Normally display is black on white background; define 13126d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_WHITE_ON_BLACK to get it inverted. 1313c609719bSwdenk 13147152b1d0Swdenk- Splash Screen Support: CONFIG_SPLASH_SCREEN 1315d791b1dcSwdenk 1316d791b1dcSwdenk If this option is set, the environment is checked for 1317d791b1dcSwdenk a variable "splashimage". If found, the usual display 1318d791b1dcSwdenk of logo, copyright and system information on the LCD 1319e94d2cd9Swdenk is suppressed and the BMP image at the address 1320d791b1dcSwdenk specified in "splashimage" is loaded instead. The 1321d791b1dcSwdenk console is redirected to the "nulldev", too. This 1322d791b1dcSwdenk allows for a "silent" boot where a splash screen is 1323d791b1dcSwdenk loaded very quickly after power-on. 1324d791b1dcSwdenk 13251ca298ceSMatthias Weisser CONFIG_SPLASH_SCREEN_ALIGN 13261ca298ceSMatthias Weisser 13271ca298ceSMatthias Weisser If this option is set the splash image can be freely positioned 13281ca298ceSMatthias Weisser on the screen. Environment variable "splashpos" specifies the 13291ca298ceSMatthias Weisser position as "x,y". If a positive number is given it is used as 13301ca298ceSMatthias Weisser number of pixel from left/top. If a negative number is given it 13311ca298ceSMatthias Weisser is used as number of pixel from right/bottom. You can also 13321ca298ceSMatthias Weisser specify 'm' for centering the image. 13331ca298ceSMatthias Weisser 13341ca298ceSMatthias Weisser Example: 13351ca298ceSMatthias Weisser setenv splashpos m,m 13361ca298ceSMatthias Weisser => image at center of screen 13371ca298ceSMatthias Weisser 13381ca298ceSMatthias Weisser setenv splashpos 30,20 13391ca298ceSMatthias Weisser => image at x = 30 and y = 20 13401ca298ceSMatthias Weisser 13411ca298ceSMatthias Weisser setenv splashpos -10,m 13421ca298ceSMatthias Weisser => vertically centered image 13431ca298ceSMatthias Weisser at x = dspWidth - bmpWidth - 9 13441ca298ceSMatthias Weisser 134598f4a3dfSStefan Roese- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP 134698f4a3dfSStefan Roese 134798f4a3dfSStefan Roese If this option is set, additionally to standard BMP 134898f4a3dfSStefan Roese images, gzipped BMP images can be displayed via the 134998f4a3dfSStefan Roese splashscreen support or the bmp command. 135098f4a3dfSStefan Roese 1351d5011762SAnatolij Gustschin- Run length encoded BMP image (RLE8) support: CONFIG_VIDEO_BMP_RLE8 1352d5011762SAnatolij Gustschin 1353d5011762SAnatolij Gustschin If this option is set, 8-bit RLE compressed BMP images 1354d5011762SAnatolij Gustschin can be displayed via the splashscreen support or the 1355d5011762SAnatolij Gustschin bmp command. 1356d5011762SAnatolij Gustschin 1357c29fdfc1Swdenk- Compression support: 1358c29fdfc1Swdenk CONFIG_BZIP2 1359c29fdfc1Swdenk 1360c29fdfc1Swdenk If this option is set, support for bzip2 compressed 1361c29fdfc1Swdenk images is included. If not, only uncompressed and gzip 1362c29fdfc1Swdenk compressed images are supported. 1363c29fdfc1Swdenk 1364c29fdfc1Swdenk NOTE: the bzip2 algorithm requires a lot of RAM, so 13656d0f6bcfSJean-Christophe PLAGNIOL-VILLARD the malloc area (as defined by CONFIG_SYS_MALLOC_LEN) should 1366c29fdfc1Swdenk be at least 4MB. 1367d791b1dcSwdenk 1368fc9c1727SLuigi 'Comio' Mantellini CONFIG_LZMA 1369fc9c1727SLuigi 'Comio' Mantellini 1370fc9c1727SLuigi 'Comio' Mantellini If this option is set, support for lzma compressed 1371fc9c1727SLuigi 'Comio' Mantellini images is included. 1372fc9c1727SLuigi 'Comio' Mantellini 1373fc9c1727SLuigi 'Comio' Mantellini Note: The LZMA algorithm adds between 2 and 4KB of code and it 1374fc9c1727SLuigi 'Comio' Mantellini requires an amount of dynamic memory that is given by the 1375fc9c1727SLuigi 'Comio' Mantellini formula: 1376fc9c1727SLuigi 'Comio' Mantellini 1377fc9c1727SLuigi 'Comio' Mantellini (1846 + 768 << (lc + lp)) * sizeof(uint16) 1378fc9c1727SLuigi 'Comio' Mantellini 1379fc9c1727SLuigi 'Comio' Mantellini Where lc and lp stand for, respectively, Literal context bits 1380fc9c1727SLuigi 'Comio' Mantellini and Literal pos bits. 1381fc9c1727SLuigi 'Comio' Mantellini 1382fc9c1727SLuigi 'Comio' Mantellini This value is upper-bounded by 14MB in the worst case. Anyway, 1383fc9c1727SLuigi 'Comio' Mantellini for a ~4MB large kernel image, we have lc=3 and lp=0 for a 1384fc9c1727SLuigi 'Comio' Mantellini total amount of (1846 + 768 << (3 + 0)) * 2 = ~41KB... that is 1385fc9c1727SLuigi 'Comio' Mantellini a very small buffer. 1386fc9c1727SLuigi 'Comio' Mantellini 1387fc9c1727SLuigi 'Comio' Mantellini Use the lzmainfo tool to determinate the lc and lp values and 1388fc9c1727SLuigi 'Comio' Mantellini then calculate the amount of needed dynamic memory (ensuring 13896d0f6bcfSJean-Christophe PLAGNIOL-VILLARD the appropriate CONFIG_SYS_MALLOC_LEN value). 1390fc9c1727SLuigi 'Comio' Mantellini 139117ea1177Swdenk- MII/PHY support: 139217ea1177Swdenk CONFIG_PHY_ADDR 139317ea1177Swdenk 139417ea1177Swdenk The address of PHY on MII bus. 139517ea1177Swdenk 139617ea1177Swdenk CONFIG_PHY_CLOCK_FREQ (ppc4xx) 139717ea1177Swdenk 139817ea1177Swdenk The clock frequency of the MII bus 139917ea1177Swdenk 140017ea1177Swdenk CONFIG_PHY_GIGE 140117ea1177Swdenk 140217ea1177Swdenk If this option is set, support for speed/duplex 140311ccc33fSMarcel Ziswiler detection of gigabit PHY is included. 140417ea1177Swdenk 140517ea1177Swdenk CONFIG_PHY_RESET_DELAY 140617ea1177Swdenk 140717ea1177Swdenk Some PHY like Intel LXT971A need extra delay after 140817ea1177Swdenk reset before any MII register access is possible. 140917ea1177Swdenk For such PHY, set this option to the usec delay 141017ea1177Swdenk required. (minimum 300usec for LXT971A) 141117ea1177Swdenk 141217ea1177Swdenk CONFIG_PHY_CMD_DELAY (ppc4xx) 141317ea1177Swdenk 141417ea1177Swdenk Some PHY like Intel LXT971A need extra delay after 141517ea1177Swdenk command issued before MII status register can be read 141617ea1177Swdenk 1417c609719bSwdenk- Ethernet address: 1418c609719bSwdenk CONFIG_ETHADDR 1419c68a05feSrichardretanubun CONFIG_ETH1ADDR 1420c609719bSwdenk CONFIG_ETH2ADDR 1421c609719bSwdenk CONFIG_ETH3ADDR 1422c68a05feSrichardretanubun CONFIG_ETH4ADDR 1423c68a05feSrichardretanubun CONFIG_ETH5ADDR 1424c609719bSwdenk 142511ccc33fSMarcel Ziswiler Define a default value for Ethernet address to use 142611ccc33fSMarcel Ziswiler for the respective Ethernet interface, in case this 1427c609719bSwdenk is not determined automatically. 1428c609719bSwdenk 1429c609719bSwdenk- IP address: 1430c609719bSwdenk CONFIG_IPADDR 1431c609719bSwdenk 1432c609719bSwdenk Define a default value for the IP address to use for 143311ccc33fSMarcel Ziswiler the default Ethernet interface, in case this is not 1434c609719bSwdenk determined through e.g. bootp. 1435*1ebcd654SWolfgang Denk (Environment variable "ipaddr") 1436c609719bSwdenk 1437c609719bSwdenk- Server IP address: 1438c609719bSwdenk CONFIG_SERVERIP 1439c609719bSwdenk 1440c609719bSwdenk Defines a default value for the IP address of a TFTP 1441c609719bSwdenk server to contact when using the "tftboot" command. 1442*1ebcd654SWolfgang Denk (Environment variable "serverip") 1443c609719bSwdenk 144497cfe861SRobin Getz CONFIG_KEEP_SERVERADDR 144597cfe861SRobin Getz 144697cfe861SRobin Getz Keeps the server's MAC address, in the env 'serveraddr' 144797cfe861SRobin Getz for passing to bootargs (like Linux's netconsole option) 144897cfe861SRobin Getz 1449*1ebcd654SWolfgang Denk- Gateway IP address: 1450*1ebcd654SWolfgang Denk CONFIG_GATEWAYIP 1451*1ebcd654SWolfgang Denk 1452*1ebcd654SWolfgang Denk Defines a default value for the IP address of the 1453*1ebcd654SWolfgang Denk default router where packets to other networks are 1454*1ebcd654SWolfgang Denk sent to. 1455*1ebcd654SWolfgang Denk (Environment variable "gatewayip") 1456*1ebcd654SWolfgang Denk 1457*1ebcd654SWolfgang Denk- Subnet mask: 1458*1ebcd654SWolfgang Denk CONFIG_NETMASK 1459*1ebcd654SWolfgang Denk 1460*1ebcd654SWolfgang Denk Defines a default value for the subnet mask (or 1461*1ebcd654SWolfgang Denk routing prefix) which is used to determine if an IP 1462*1ebcd654SWolfgang Denk address belongs to the local subnet or needs to be 1463*1ebcd654SWolfgang Denk forwarded through a router. 1464*1ebcd654SWolfgang Denk (Environment variable "netmask") 1465*1ebcd654SWolfgang Denk 146653a5c424SDavid Updegraff- Multicast TFTP Mode: 146753a5c424SDavid Updegraff CONFIG_MCAST_TFTP 146853a5c424SDavid Updegraff 146953a5c424SDavid Updegraff Defines whether you want to support multicast TFTP as per 147053a5c424SDavid Updegraff rfc-2090; for example to work with atftp. Lets lots of targets 147111ccc33fSMarcel Ziswiler tftp down the same boot image concurrently. Note: the Ethernet 147253a5c424SDavid Updegraff driver in use must provide a function: mcast() to join/leave a 147353a5c424SDavid Updegraff multicast group. 147453a5c424SDavid Updegraff 1475c609719bSwdenk- BOOTP Recovery Mode: 1476c609719bSwdenk CONFIG_BOOTP_RANDOM_DELAY 1477c609719bSwdenk 1478c609719bSwdenk If you have many targets in a network that try to 1479c609719bSwdenk boot using BOOTP, you may want to avoid that all 1480c609719bSwdenk systems send out BOOTP requests at precisely the same 1481c609719bSwdenk moment (which would happen for instance at recovery 1482c609719bSwdenk from a power failure, when all systems will try to 1483c609719bSwdenk boot, thus flooding the BOOTP server. Defining 1484c609719bSwdenk CONFIG_BOOTP_RANDOM_DELAY causes a random delay to be 1485c609719bSwdenk inserted before sending out BOOTP requests. The 14866c33c785SWolfgang Denk following delays are inserted then: 1487c609719bSwdenk 1488c609719bSwdenk 1st BOOTP request: delay 0 ... 1 sec 1489c609719bSwdenk 2nd BOOTP request: delay 0 ... 2 sec 1490c609719bSwdenk 3rd BOOTP request: delay 0 ... 4 sec 1491c609719bSwdenk 4th and following 1492c609719bSwdenk BOOTP requests: delay 0 ... 8 sec 1493c609719bSwdenk 1494fe389a82Sstroese- DHCP Advanced Options: 14951fe80d79SJon Loeliger You can fine tune the DHCP functionality by defining 14961fe80d79SJon Loeliger CONFIG_BOOTP_* symbols: 1497fe389a82Sstroese 14981fe80d79SJon Loeliger CONFIG_BOOTP_SUBNETMASK 14991fe80d79SJon Loeliger CONFIG_BOOTP_GATEWAY 15001fe80d79SJon Loeliger CONFIG_BOOTP_HOSTNAME 15011fe80d79SJon Loeliger CONFIG_BOOTP_NISDOMAIN 15021fe80d79SJon Loeliger CONFIG_BOOTP_BOOTPATH 15031fe80d79SJon Loeliger CONFIG_BOOTP_BOOTFILESIZE 15041fe80d79SJon Loeliger CONFIG_BOOTP_DNS 15051fe80d79SJon Loeliger CONFIG_BOOTP_DNS2 15061fe80d79SJon Loeliger CONFIG_BOOTP_SEND_HOSTNAME 15071fe80d79SJon Loeliger CONFIG_BOOTP_NTPSERVER 15081fe80d79SJon Loeliger CONFIG_BOOTP_TIMEOFFSET 15091fe80d79SJon Loeliger CONFIG_BOOTP_VENDOREX 1510fe389a82Sstroese 15115d110f0aSWilson Callan CONFIG_BOOTP_SERVERIP - TFTP server will be the serverip 15125d110f0aSWilson Callan environment variable, not the BOOTP server. 1513fe389a82Sstroese 1514fe389a82Sstroese CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS 1515fe389a82Sstroese serverip from a DHCP server, it is possible that more 1516fe389a82Sstroese than one DNS serverip is offered to the client. 1517fe389a82Sstroese If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS 1518fe389a82Sstroese serverip will be stored in the additional environment 1519fe389a82Sstroese variable "dnsip2". The first DNS serverip is always 1520fe389a82Sstroese stored in the variable "dnsip", when CONFIG_BOOTP_DNS 15211fe80d79SJon Loeliger is defined. 1522fe389a82Sstroese 1523fe389a82Sstroese CONFIG_BOOTP_SEND_HOSTNAME - Some DHCP servers are capable 1524fe389a82Sstroese to do a dynamic update of a DNS server. To do this, they 1525fe389a82Sstroese need the hostname of the DHCP requester. 15265d110f0aSWilson Callan If CONFIG_BOOTP_SEND_HOSTNAME is defined, the content 15271fe80d79SJon Loeliger of the "hostname" environment variable is passed as 15281fe80d79SJon Loeliger option 12 to the DHCP server. 1529fe389a82Sstroese 1530d9a2f416SAras Vaichas CONFIG_BOOTP_DHCP_REQUEST_DELAY 1531d9a2f416SAras Vaichas 1532d9a2f416SAras Vaichas A 32bit value in microseconds for a delay between 1533d9a2f416SAras Vaichas receiving a "DHCP Offer" and sending the "DHCP Request". 1534d9a2f416SAras Vaichas This fixes a problem with certain DHCP servers that don't 1535d9a2f416SAras Vaichas respond 100% of the time to a "DHCP request". E.g. On an 1536d9a2f416SAras Vaichas AT91RM9200 processor running at 180MHz, this delay needed 1537d9a2f416SAras Vaichas to be *at least* 15,000 usec before a Windows Server 2003 1538d9a2f416SAras Vaichas DHCP server would reply 100% of the time. I recommend at 1539d9a2f416SAras Vaichas least 50,000 usec to be safe. The alternative is to hope 1540d9a2f416SAras Vaichas that one of the retries will be successful but note that 1541d9a2f416SAras Vaichas the DHCP timeout and retry process takes a longer than 1542d9a2f416SAras Vaichas this delay. 1543d9a2f416SAras Vaichas 1544a3d991bdSwdenk - CDP Options: 1545a3d991bdSwdenk CONFIG_CDP_DEVICE_ID 1546a3d991bdSwdenk 1547a3d991bdSwdenk The device id used in CDP trigger frames. 1548a3d991bdSwdenk 1549a3d991bdSwdenk CONFIG_CDP_DEVICE_ID_PREFIX 1550a3d991bdSwdenk 1551a3d991bdSwdenk A two character string which is prefixed to the MAC address 1552a3d991bdSwdenk of the device. 1553a3d991bdSwdenk 1554a3d991bdSwdenk CONFIG_CDP_PORT_ID 1555a3d991bdSwdenk 1556a3d991bdSwdenk A printf format string which contains the ascii name of 1557a3d991bdSwdenk the port. Normally is set to "eth%d" which sets 155811ccc33fSMarcel Ziswiler eth0 for the first Ethernet, eth1 for the second etc. 1559a3d991bdSwdenk 1560a3d991bdSwdenk CONFIG_CDP_CAPABILITIES 1561a3d991bdSwdenk 1562a3d991bdSwdenk A 32bit integer which indicates the device capabilities; 1563a3d991bdSwdenk 0x00000010 for a normal host which does not forwards. 1564a3d991bdSwdenk 1565a3d991bdSwdenk CONFIG_CDP_VERSION 1566a3d991bdSwdenk 1567a3d991bdSwdenk An ascii string containing the version of the software. 1568a3d991bdSwdenk 1569a3d991bdSwdenk CONFIG_CDP_PLATFORM 1570a3d991bdSwdenk 1571a3d991bdSwdenk An ascii string containing the name of the platform. 1572a3d991bdSwdenk 1573a3d991bdSwdenk CONFIG_CDP_TRIGGER 1574a3d991bdSwdenk 1575a3d991bdSwdenk A 32bit integer sent on the trigger. 1576a3d991bdSwdenk 1577a3d991bdSwdenk CONFIG_CDP_POWER_CONSUMPTION 1578a3d991bdSwdenk 1579a3d991bdSwdenk A 16bit integer containing the power consumption of the 1580a3d991bdSwdenk device in .1 of milliwatts. 1581a3d991bdSwdenk 1582a3d991bdSwdenk CONFIG_CDP_APPLIANCE_VLAN_TYPE 1583a3d991bdSwdenk 1584a3d991bdSwdenk A byte containing the id of the VLAN. 1585a3d991bdSwdenk 1586c609719bSwdenk- Status LED: CONFIG_STATUS_LED 1587c609719bSwdenk 1588c609719bSwdenk Several configurations allow to display the current 1589c609719bSwdenk status using a LED. For instance, the LED will blink 1590c609719bSwdenk fast while running U-Boot code, stop blinking as 1591c609719bSwdenk soon as a reply to a BOOTP request was received, and 1592c609719bSwdenk start blinking slow once the Linux kernel is running 1593c609719bSwdenk (supported by a status LED driver in the Linux 1594c609719bSwdenk kernel). Defining CONFIG_STATUS_LED enables this 1595c609719bSwdenk feature in U-Boot. 1596c609719bSwdenk 1597c609719bSwdenk- CAN Support: CONFIG_CAN_DRIVER 1598c609719bSwdenk 1599c609719bSwdenk Defining CONFIG_CAN_DRIVER enables CAN driver support 1600c609719bSwdenk on those systems that support this (optional) 1601c609719bSwdenk feature, like the TQM8xxL modules. 1602c609719bSwdenk 1603c609719bSwdenk- I2C Support: CONFIG_HARD_I2C | CONFIG_SOFT_I2C 1604c609719bSwdenk 1605b37c7e5eSwdenk These enable I2C serial bus commands. Defining either of 1606b37c7e5eSwdenk (but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will 160711ccc33fSMarcel Ziswiler include the appropriate I2C driver for the selected CPU. 1608c609719bSwdenk 1609b37c7e5eSwdenk This will allow you to use i2c commands at the u-boot 1610602ad3b3SJon Loeliger command line (as long as you set CONFIG_CMD_I2C in 1611b37c7e5eSwdenk CONFIG_COMMANDS) and communicate with i2c based realtime 1612b37c7e5eSwdenk clock chips. See common/cmd_i2c.c for a description of the 1613c609719bSwdenk command line interface. 1614c609719bSwdenk 1615bb99ad6dSBen Warren CONFIG_HARD_I2C selects a hardware I2C controller. 1616c609719bSwdenk 1617b37c7e5eSwdenk CONFIG_SOFT_I2C configures u-boot to use a software (aka 1618b37c7e5eSwdenk bit-banging) driver instead of CPM or similar hardware 1619b37c7e5eSwdenk support for I2C. 1620c609719bSwdenk 1621b37c7e5eSwdenk There are several other quantities that must also be 1622b37c7e5eSwdenk defined when you define CONFIG_HARD_I2C or CONFIG_SOFT_I2C. 1623c609719bSwdenk 16246d0f6bcfSJean-Christophe PLAGNIOL-VILLARD In both cases you will need to define CONFIG_SYS_I2C_SPEED 1625b37c7e5eSwdenk to be the frequency (in Hz) at which you wish your i2c bus 16266d0f6bcfSJean-Christophe PLAGNIOL-VILLARD to run and CONFIG_SYS_I2C_SLAVE to be the address of this node (ie 162711ccc33fSMarcel Ziswiler the CPU's i2c node address). 1628c609719bSwdenk 16298d321b81SPeter Tyser Now, the u-boot i2c code for the mpc8xx 1630a47a12beSStefan Roese (arch/powerpc/cpu/mpc8xx/i2c.c) sets the CPU up as a master node 16318d321b81SPeter Tyser and so its address should therefore be cleared to 0 (See, 16328d321b81SPeter Tyser eg, MPC823e User's Manual p.16-473). So, set 16338d321b81SPeter Tyser CONFIG_SYS_I2C_SLAVE to 0. 1634b37c7e5eSwdenk 16355da71efaSEric Millbrandt CONFIG_SYS_I2C_INIT_MPC5XXX 16365da71efaSEric Millbrandt 16375da71efaSEric Millbrandt When a board is reset during an i2c bus transfer 16385da71efaSEric Millbrandt chips might think that the current transfer is still 16395da71efaSEric Millbrandt in progress. Reset the slave devices by sending start 16405da71efaSEric Millbrandt commands until the slave device responds. 16415da71efaSEric Millbrandt 1642b37c7e5eSwdenk That's all that's required for CONFIG_HARD_I2C. 1643b37c7e5eSwdenk 1644b37c7e5eSwdenk If you use the software i2c interface (CONFIG_SOFT_I2C) 1645b37c7e5eSwdenk then the following macros need to be defined (examples are 1646b37c7e5eSwdenk from include/configs/lwmon.h): 1647c609719bSwdenk 1648c609719bSwdenk I2C_INIT 1649c609719bSwdenk 1650b37c7e5eSwdenk (Optional). Any commands necessary to enable the I2C 1651c609719bSwdenk controller or configure ports. 1652c609719bSwdenk 1653b37c7e5eSwdenk eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) 1654b37c7e5eSwdenk 1655c609719bSwdenk I2C_PORT 1656c609719bSwdenk 1657c609719bSwdenk (Only for MPC8260 CPU). The I/O port to use (the code 1658c609719bSwdenk assumes both bits are on the same port). Valid values 1659c609719bSwdenk are 0..3 for ports A..D. 1660c609719bSwdenk 1661c609719bSwdenk I2C_ACTIVE 1662c609719bSwdenk 1663c609719bSwdenk The code necessary to make the I2C data line active 1664c609719bSwdenk (driven). If the data line is open collector, this 1665c609719bSwdenk define can be null. 1666c609719bSwdenk 1667b37c7e5eSwdenk eg: #define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) 1668b37c7e5eSwdenk 1669c609719bSwdenk I2C_TRISTATE 1670c609719bSwdenk 1671c609719bSwdenk The code necessary to make the I2C data line tri-stated 1672c609719bSwdenk (inactive). If the data line is open collector, this 1673c609719bSwdenk define can be null. 1674c609719bSwdenk 1675b37c7e5eSwdenk eg: #define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) 1676b37c7e5eSwdenk 1677c609719bSwdenk I2C_READ 1678c609719bSwdenk 1679c609719bSwdenk Code that returns TRUE if the I2C data line is high, 1680c609719bSwdenk FALSE if it is low. 1681c609719bSwdenk 1682b37c7e5eSwdenk eg: #define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) 1683b37c7e5eSwdenk 1684c609719bSwdenk I2C_SDA(bit) 1685c609719bSwdenk 1686c609719bSwdenk If <bit> is TRUE, sets the I2C data line high. If it 1687c609719bSwdenk is FALSE, it clears it (low). 1688c609719bSwdenk 1689b37c7e5eSwdenk eg: #define I2C_SDA(bit) \ 1690b37c7e5eSwdenk if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ 1691b37c7e5eSwdenk else immr->im_cpm.cp_pbdat &= ~PB_SDA 1692b37c7e5eSwdenk 1693c609719bSwdenk I2C_SCL(bit) 1694c609719bSwdenk 1695c609719bSwdenk If <bit> is TRUE, sets the I2C clock line high. If it 1696c609719bSwdenk is FALSE, it clears it (low). 1697c609719bSwdenk 1698b37c7e5eSwdenk eg: #define I2C_SCL(bit) \ 1699b37c7e5eSwdenk if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ 1700b37c7e5eSwdenk else immr->im_cpm.cp_pbdat &= ~PB_SCL 1701b37c7e5eSwdenk 1702c609719bSwdenk I2C_DELAY 1703c609719bSwdenk 1704c609719bSwdenk This delay is invoked four times per clock cycle so this 1705c609719bSwdenk controls the rate of data transfer. The data rate thus 1706b37c7e5eSwdenk is 1 / (I2C_DELAY * 4). Often defined to be something 1707b37c7e5eSwdenk like: 1708b37c7e5eSwdenk 1709b37c7e5eSwdenk #define I2C_DELAY udelay(2) 1710c609719bSwdenk 1711793b5726SMike Frysinger CONFIG_SOFT_I2C_GPIO_SCL / CONFIG_SOFT_I2C_GPIO_SDA 1712793b5726SMike Frysinger 1713793b5726SMike Frysinger If your arch supports the generic GPIO framework (asm/gpio.h), 1714793b5726SMike Frysinger then you may alternatively define the two GPIOs that are to be 1715793b5726SMike Frysinger used as SCL / SDA. Any of the previous I2C_xxx macros will 1716793b5726SMike Frysinger have GPIO-based defaults assigned to them as appropriate. 1717793b5726SMike Frysinger 1718793b5726SMike Frysinger You should define these to the GPIO value as given directly to 1719793b5726SMike Frysinger the generic GPIO functions. 1720793b5726SMike Frysinger 17216d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_I2C_INIT_BOARD 172247cd00faSwdenk 172347cd00faSwdenk When a board is reset during an i2c bus transfer 172447cd00faSwdenk chips might think that the current transfer is still 172547cd00faSwdenk in progress. On some boards it is possible to access 172647cd00faSwdenk the i2c SCLK line directly, either by using the 172747cd00faSwdenk processor pin as a GPIO or by having a second pin 172847cd00faSwdenk connected to the bus. If this option is defined a 172947cd00faSwdenk custom i2c_init_board() routine in boards/xxx/board.c 173047cd00faSwdenk is run early in the boot sequence. 173147cd00faSwdenk 173226a33504SRichard Retanubun CONFIG_SYS_I2C_BOARD_LATE_INIT 173326a33504SRichard Retanubun 173426a33504SRichard Retanubun An alternative to CONFIG_SYS_I2C_INIT_BOARD. If this option is 173526a33504SRichard Retanubun defined a custom i2c_board_late_init() routine in 173626a33504SRichard Retanubun boards/xxx/board.c is run AFTER the operations in i2c_init() 173726a33504SRichard Retanubun is completed. This callpoint can be used to unreset i2c bus 173826a33504SRichard Retanubun using CPU i2c controller register accesses for CPUs whose i2c 173926a33504SRichard Retanubun controller provide such a method. It is called at the end of 174026a33504SRichard Retanubun i2c_init() to allow i2c_init operations to setup the i2c bus 174126a33504SRichard Retanubun controller on the CPU (e.g. setting bus speed & slave address). 174226a33504SRichard Retanubun 174317ea1177Swdenk CONFIG_I2CFAST (PPC405GP|PPC405EP only) 174417ea1177Swdenk 174517ea1177Swdenk This option enables configuration of bi_iic_fast[] flags 174617ea1177Swdenk in u-boot bd_info structure based on u-boot environment 174717ea1177Swdenk variable "i2cfast". (see also i2cfast) 174817ea1177Swdenk 1749bb99ad6dSBen Warren CONFIG_I2C_MULTI_BUS 1750bb99ad6dSBen Warren 1751bb99ad6dSBen Warren This option allows the use of multiple I2C buses, each of which 1752bb99ad6dSBen Warren must have a controller. At any point in time, only one bus is 1753bb99ad6dSBen Warren active. To switch to a different bus, use the 'i2c dev' command. 1754bb99ad6dSBen Warren Note that bus numbering is zero-based. 1755bb99ad6dSBen Warren 17566d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_I2C_NOPROBES 1757bb99ad6dSBen Warren 1758bb99ad6dSBen Warren This option specifies a list of I2C devices that will be skipped 17590f89c54bSPeter Tyser when the 'i2c probe' command is issued. If CONFIG_I2C_MULTI_BUS 17600f89c54bSPeter Tyser is set, specify a list of bus-device pairs. Otherwise, specify 17610f89c54bSPeter Tyser a 1D array of device addresses 1762bb99ad6dSBen Warren 1763bb99ad6dSBen Warren e.g. 1764bb99ad6dSBen Warren #undef CONFIG_I2C_MULTI_BUS 17656d0f6bcfSJean-Christophe PLAGNIOL-VILLARD #define CONFIG_SYS_I2C_NOPROBES {0x50,0x68} 1766bb99ad6dSBen Warren 1767bb99ad6dSBen Warren will skip addresses 0x50 and 0x68 on a board with one I2C bus 1768bb99ad6dSBen Warren 1769bb99ad6dSBen Warren #define CONFIG_I2C_MULTI_BUS 17706d0f6bcfSJean-Christophe PLAGNIOL-VILLARD #define CONFIG_SYS_I2C_MULTI_NOPROBES {{0,0x50},{0,0x68},{1,0x54}} 1771bb99ad6dSBen Warren 1772bb99ad6dSBen Warren will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1 1773bb99ad6dSBen Warren 17746d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SPD_BUS_NUM 1775be5e6181STimur Tabi 1776be5e6181STimur Tabi If defined, then this indicates the I2C bus number for DDR SPD. 1777be5e6181STimur Tabi If not defined, then U-Boot assumes that SPD is on I2C bus 0. 1778be5e6181STimur Tabi 17796d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_RTC_BUS_NUM 17800dc018ecSStefan Roese 17810dc018ecSStefan Roese If defined, then this indicates the I2C bus number for the RTC. 17820dc018ecSStefan Roese If not defined, then U-Boot assumes that RTC is on I2C bus 0. 17830dc018ecSStefan Roese 17846d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_DTT_BUS_NUM 17850dc018ecSStefan Roese 17860dc018ecSStefan Roese If defined, then this indicates the I2C bus number for the DTT. 17870dc018ecSStefan Roese If not defined, then U-Boot assumes that DTT is on I2C bus 0. 17880dc018ecSStefan Roese 17896d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_I2C_DTT_ADDR: 17909ebbb54fSVictor Gallardo 17919ebbb54fSVictor Gallardo If defined, specifies the I2C address of the DTT device. 17929ebbb54fSVictor Gallardo If not defined, then U-Boot uses predefined value for 17939ebbb54fSVictor Gallardo specified DTT device. 17949ebbb54fSVictor Gallardo 1795be5e6181STimur Tabi CONFIG_FSL_I2C 1796be5e6181STimur Tabi 1797be5e6181STimur Tabi Define this option if you want to use Freescale's I2C driver in 17987817cb20SMarcel Ziswiler drivers/i2c/fsl_i2c.c. 1799be5e6181STimur Tabi 180067b23a32SHeiko Schocher CONFIG_I2C_MUX 180167b23a32SHeiko Schocher 180267b23a32SHeiko Schocher Define this option if you have I2C devices reached over 1 .. n 180367b23a32SHeiko Schocher I2C Muxes like the pca9544a. This option addes a new I2C 180467b23a32SHeiko Schocher Command "i2c bus [muxtype:muxaddr:muxchannel]" which adds a 180567b23a32SHeiko Schocher new I2C Bus to the existing I2C Busses. If you select the 180667b23a32SHeiko Schocher new Bus with "i2c dev", u-bbot sends first the commandos for 180767b23a32SHeiko Schocher the muxes to activate this new "bus". 180867b23a32SHeiko Schocher 180967b23a32SHeiko Schocher CONFIG_I2C_MULTI_BUS must be also defined, to use this 181067b23a32SHeiko Schocher feature! 181167b23a32SHeiko Schocher 181267b23a32SHeiko Schocher Example: 181367b23a32SHeiko Schocher Adding a new I2C Bus reached over 2 pca9544a muxes 181467b23a32SHeiko Schocher The First mux with address 70 and channel 6 181567b23a32SHeiko Schocher The Second mux with address 71 and channel 4 181667b23a32SHeiko Schocher 181767b23a32SHeiko Schocher => i2c bus pca9544a:70:6:pca9544a:71:4 181867b23a32SHeiko Schocher 181967b23a32SHeiko Schocher Use the "i2c bus" command without parameter, to get a list 182067b23a32SHeiko Schocher of I2C Busses with muxes: 182167b23a32SHeiko Schocher 182267b23a32SHeiko Schocher => i2c bus 182367b23a32SHeiko Schocher Busses reached over muxes: 182467b23a32SHeiko Schocher Bus ID: 2 182567b23a32SHeiko Schocher reached over Mux(es): 182667b23a32SHeiko Schocher pca9544a@70 ch: 4 182767b23a32SHeiko Schocher Bus ID: 3 182867b23a32SHeiko Schocher reached over Mux(es): 182967b23a32SHeiko Schocher pca9544a@70 ch: 6 183067b23a32SHeiko Schocher pca9544a@71 ch: 4 183167b23a32SHeiko Schocher => 183267b23a32SHeiko Schocher 183367b23a32SHeiko Schocher If you now switch to the new I2C Bus 3 with "i2c dev 3" 1834f9a78b8dSMichael Jones u-boot first sends the command to the mux@70 to enable 1835f9a78b8dSMichael Jones channel 6, and then the command to the mux@71 to enable 183667b23a32SHeiko Schocher the channel 4. 183767b23a32SHeiko Schocher 183867b23a32SHeiko Schocher After that, you can use the "normal" i2c commands as 1839f9a78b8dSMichael Jones usual to communicate with your I2C devices behind 184067b23a32SHeiko Schocher the 2 muxes. 184167b23a32SHeiko Schocher 184267b23a32SHeiko Schocher This option is actually implemented for the bitbanging 184367b23a32SHeiko Schocher algorithm in common/soft_i2c.c and for the Hardware I2C 184467b23a32SHeiko Schocher Bus on the MPC8260. But it should be not so difficult 184567b23a32SHeiko Schocher to add this option to other architectures. 184667b23a32SHeiko Schocher 18472ac6985aSAndrew Dyer CONFIG_SOFT_I2C_READ_REPEATED_START 18482ac6985aSAndrew Dyer 18492ac6985aSAndrew Dyer defining this will force the i2c_read() function in 18502ac6985aSAndrew Dyer the soft_i2c driver to perform an I2C repeated start 18512ac6985aSAndrew Dyer between writing the address pointer and reading the 18522ac6985aSAndrew Dyer data. If this define is omitted the default behaviour 18532ac6985aSAndrew Dyer of doing a stop-start sequence will be used. Most I2C 18542ac6985aSAndrew Dyer devices can use either method, but some require one or 18552ac6985aSAndrew Dyer the other. 1856be5e6181STimur Tabi 1857c609719bSwdenk- SPI Support: CONFIG_SPI 1858c609719bSwdenk 1859c609719bSwdenk Enables SPI driver (so far only tested with 1860c609719bSwdenk SPI EEPROM, also an instance works with Crystal A/D and 1861c609719bSwdenk D/As on the SACSng board) 1862c609719bSwdenk 18636639562eSYoshihiro Shimoda CONFIG_SH_SPI 18646639562eSYoshihiro Shimoda 18656639562eSYoshihiro Shimoda Enables the driver for SPI controller on SuperH. Currently 18666639562eSYoshihiro Shimoda only SH7757 is supported. 18676639562eSYoshihiro Shimoda 1868c609719bSwdenk CONFIG_SPI_X 1869c609719bSwdenk 1870c609719bSwdenk Enables extended (16-bit) SPI EEPROM addressing. 1871c609719bSwdenk (symmetrical to CONFIG_I2C_X) 1872c609719bSwdenk 1873c609719bSwdenk CONFIG_SOFT_SPI 1874c609719bSwdenk 1875c609719bSwdenk Enables a software (bit-bang) SPI driver rather than 1876c609719bSwdenk using hardware support. This is a general purpose 1877c609719bSwdenk driver that only requires three general I/O port pins 1878c609719bSwdenk (two outputs, one input) to function. If this is 1879c609719bSwdenk defined, the board configuration must define several 1880c609719bSwdenk SPI configuration items (port pins to use, etc). For 1881c609719bSwdenk an example, see include/configs/sacsng.h. 1882c609719bSwdenk 188304a9e118SBen Warren CONFIG_HARD_SPI 188404a9e118SBen Warren 188504a9e118SBen Warren Enables a hardware SPI driver for general-purpose reads 188604a9e118SBen Warren and writes. As with CONFIG_SOFT_SPI, the board configuration 188704a9e118SBen Warren must define a list of chip-select function pointers. 188804a9e118SBen Warren Currently supported on some MPC8xxx processors. For an 188904a9e118SBen Warren example, see include/configs/mpc8349emds.h. 189004a9e118SBen Warren 189138254f45SGuennadi Liakhovetski CONFIG_MXC_SPI 189238254f45SGuennadi Liakhovetski 189338254f45SGuennadi Liakhovetski Enables the driver for the SPI controllers on i.MX and MXC 189438254f45SGuennadi Liakhovetski SoCs. Currently only i.MX31 is supported. 189538254f45SGuennadi Liakhovetski 18960133502eSMatthias Fuchs- FPGA Support: CONFIG_FPGA 18970133502eSMatthias Fuchs 18980133502eSMatthias Fuchs Enables FPGA subsystem. 18990133502eSMatthias Fuchs 19000133502eSMatthias Fuchs CONFIG_FPGA_<vendor> 19010133502eSMatthias Fuchs 19020133502eSMatthias Fuchs Enables support for specific chip vendors. 19030133502eSMatthias Fuchs (ALTERA, XILINX) 19040133502eSMatthias Fuchs 19050133502eSMatthias Fuchs CONFIG_FPGA_<family> 19060133502eSMatthias Fuchs 19070133502eSMatthias Fuchs Enables support for FPGA family. 19080133502eSMatthias Fuchs (SPARTAN2, SPARTAN3, VIRTEX2, CYCLONE2, ACEX1K, ACEX) 19090133502eSMatthias Fuchs 19100133502eSMatthias Fuchs CONFIG_FPGA_COUNT 1911c609719bSwdenk 1912c609719bSwdenk Specify the number of FPGA devices to support. 1913c609719bSwdenk 19146d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_PROG_FEEDBACK 1915c609719bSwdenk 1916c609719bSwdenk Enable printing of hash marks during FPGA configuration. 1917c609719bSwdenk 19186d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_CHECK_BUSY 1919c609719bSwdenk 1920c609719bSwdenk Enable checks on FPGA configuration interface busy 1921c609719bSwdenk status by the configuration function. This option 1922c609719bSwdenk will require a board or device specific function to 1923c609719bSwdenk be written. 1924c609719bSwdenk 1925c609719bSwdenk CONFIG_FPGA_DELAY 1926c609719bSwdenk 1927c609719bSwdenk If defined, a function that provides delays in the FPGA 1928c609719bSwdenk configuration driver. 1929c609719bSwdenk 19306d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_CHECK_CTRLC 1931c609719bSwdenk Allow Control-C to interrupt FPGA configuration 1932c609719bSwdenk 19336d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_CHECK_ERROR 1934c609719bSwdenk 1935c609719bSwdenk Check for configuration errors during FPGA bitfile 1936c609719bSwdenk loading. For example, abort during Virtex II 1937c609719bSwdenk configuration if the INIT_B line goes low (which 1938c609719bSwdenk indicated a CRC error). 1939c609719bSwdenk 19406d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_WAIT_INIT 1941c609719bSwdenk 1942c609719bSwdenk Maximum time to wait for the INIT_B line to deassert 1943c609719bSwdenk after PROB_B has been deasserted during a Virtex II 1944c609719bSwdenk FPGA configuration sequence. The default time is 500 194511ccc33fSMarcel Ziswiler ms. 1946c609719bSwdenk 19476d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_WAIT_BUSY 1948c609719bSwdenk 1949c609719bSwdenk Maximum time to wait for BUSY to deassert during 195011ccc33fSMarcel Ziswiler Virtex II FPGA configuration. The default is 5 ms. 1951c609719bSwdenk 19526d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FPGA_WAIT_CONFIG 1953c609719bSwdenk 1954c609719bSwdenk Time to wait after FPGA configuration. The default is 195511ccc33fSMarcel Ziswiler 200 ms. 1956c609719bSwdenk 1957c609719bSwdenk- Configuration Management: 1958c609719bSwdenk CONFIG_IDENT_STRING 1959c609719bSwdenk 1960c609719bSwdenk If defined, this string will be added to the U-Boot 1961c609719bSwdenk version information (U_BOOT_VERSION) 1962c609719bSwdenk 1963c609719bSwdenk- Vendor Parameter Protection: 1964c609719bSwdenk 1965c609719bSwdenk U-Boot considers the values of the environment 1966c609719bSwdenk variables "serial#" (Board Serial Number) and 19677152b1d0Swdenk "ethaddr" (Ethernet Address) to be parameters that 1968c609719bSwdenk are set once by the board vendor / manufacturer, and 1969c609719bSwdenk protects these variables from casual modification by 1970c609719bSwdenk the user. Once set, these variables are read-only, 1971c609719bSwdenk and write or delete attempts are rejected. You can 197211ccc33fSMarcel Ziswiler change this behaviour: 1973c609719bSwdenk 1974c609719bSwdenk If CONFIG_ENV_OVERWRITE is #defined in your config 1975c609719bSwdenk file, the write protection for vendor parameters is 197647cd00faSwdenk completely disabled. Anybody can change or delete 1977c609719bSwdenk these parameters. 1978c609719bSwdenk 1979c609719bSwdenk Alternatively, if you #define _both_ CONFIG_ETHADDR 1980c609719bSwdenk _and_ CONFIG_OVERWRITE_ETHADDR_ONCE, a default 198111ccc33fSMarcel Ziswiler Ethernet address is installed in the environment, 1982c609719bSwdenk which can be changed exactly ONCE by the user. [The 1983c609719bSwdenk serial# is unaffected by this, i. e. it remains 1984c609719bSwdenk read-only.] 1985c609719bSwdenk 1986c609719bSwdenk- Protected RAM: 1987c609719bSwdenk CONFIG_PRAM 1988c609719bSwdenk 1989c609719bSwdenk Define this variable to enable the reservation of 1990c609719bSwdenk "protected RAM", i. e. RAM which is not overwritten 1991c609719bSwdenk by U-Boot. Define CONFIG_PRAM to hold the number of 1992c609719bSwdenk kB you want to reserve for pRAM. You can overwrite 1993c609719bSwdenk this default value by defining an environment 1994c609719bSwdenk variable "pram" to the number of kB you want to 1995c609719bSwdenk reserve. Note that the board info structure will 1996c609719bSwdenk still show the full amount of RAM. If pRAM is 1997c609719bSwdenk reserved, a new environment variable "mem" will 1998c609719bSwdenk automatically be defined to hold the amount of 1999c609719bSwdenk remaining RAM in a form that can be passed as boot 2000c609719bSwdenk argument to Linux, for instance like that: 2001c609719bSwdenk 2002fe126d8bSWolfgang Denk setenv bootargs ... mem=\${mem} 2003c609719bSwdenk saveenv 2004c609719bSwdenk 2005c609719bSwdenk This way you can tell Linux not to use this memory, 2006c609719bSwdenk either, which results in a memory region that will 2007c609719bSwdenk not be affected by reboots. 2008c609719bSwdenk 2009c609719bSwdenk *WARNING* If your board configuration uses automatic 2010c609719bSwdenk detection of the RAM size, you must make sure that 2011c609719bSwdenk this memory test is non-destructive. So far, the 2012c609719bSwdenk following board configurations are known to be 2013c609719bSwdenk "pRAM-clean": 2014c609719bSwdenk 2015c609719bSwdenk ETX094, IVMS8, IVML24, SPD8xx, TQM8xxL, 2016c609719bSwdenk HERMES, IP860, RPXlite, LWMON, LANTEC, 2017544d97e9SWolfgang Denk FLAGADM, TQM8260 2018c609719bSwdenk 2019c609719bSwdenk- Error Recovery: 2020c609719bSwdenk CONFIG_PANIC_HANG 2021c609719bSwdenk 2022c609719bSwdenk Define this variable to stop the system in case of a 2023c609719bSwdenk fatal error, so that you have to reset it manually. 2024c609719bSwdenk This is probably NOT a good idea for an embedded 202511ccc33fSMarcel Ziswiler system where you want the system to reboot 2026c609719bSwdenk automatically as fast as possible, but it may be 2027c609719bSwdenk useful during development since you can try to debug 2028c609719bSwdenk the conditions that lead to the situation. 2029c609719bSwdenk 2030c609719bSwdenk CONFIG_NET_RETRY_COUNT 2031c609719bSwdenk 2032c609719bSwdenk This variable defines the number of retries for 2033c609719bSwdenk network operations like ARP, RARP, TFTP, or BOOTP 2034c609719bSwdenk before giving up the operation. If not defined, a 2035c609719bSwdenk default value of 5 is used. 2036c609719bSwdenk 203740cb90eeSGuennadi Liakhovetski CONFIG_ARP_TIMEOUT 203840cb90eeSGuennadi Liakhovetski 203940cb90eeSGuennadi Liakhovetski Timeout waiting for an ARP reply in milliseconds. 204040cb90eeSGuennadi Liakhovetski 2041c609719bSwdenk- Command Interpreter: 20428078f1a5SWolfgang Denk CONFIG_AUTO_COMPLETE 204304a85b3bSwdenk 204404a85b3bSwdenk Enable auto completion of commands using TAB. 204504a85b3bSwdenk 20468078f1a5SWolfgang Denk Note that this feature has NOT been implemented yet 20478078f1a5SWolfgang Denk for the "hush" shell. 20488078f1a5SWolfgang Denk 20498078f1a5SWolfgang Denk 20506d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_HUSH_PARSER 2051c609719bSwdenk 2052c609719bSwdenk Define this variable to enable the "hush" shell (from 2053c609719bSwdenk Busybox) as command line interpreter, thus enabling 2054c609719bSwdenk powerful command line syntax like 2055c609719bSwdenk if...then...else...fi conditionals or `&&' and '||' 2056c609719bSwdenk constructs ("shell scripts"). 2057c609719bSwdenk 2058c609719bSwdenk If undefined, you get the old, much simpler behaviour 2059c609719bSwdenk with a somewhat smaller memory footprint. 2060c609719bSwdenk 2061c609719bSwdenk 20626d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PROMPT_HUSH_PS2 2063c609719bSwdenk 2064c609719bSwdenk This defines the secondary prompt string, which is 2065c609719bSwdenk printed when the command interpreter needs more input 2066c609719bSwdenk to complete a command. Usually "> ". 2067c609719bSwdenk 2068c609719bSwdenk Note: 2069c609719bSwdenk 2070c609719bSwdenk In the current implementation, the local variables 2071c609719bSwdenk space and global environment variables space are 2072c609719bSwdenk separated. Local variables are those you define by 20733b57fe0aSwdenk simply typing `name=value'. To access a local 2074c609719bSwdenk variable later on, you have write `$name' or 20753b57fe0aSwdenk `${name}'; to execute the contents of a variable 20763b57fe0aSwdenk directly type `$name' at the command prompt. 2077c609719bSwdenk 2078c609719bSwdenk Global environment variables are those you use 2079c609719bSwdenk setenv/printenv to work with. To run a command stored 2080c609719bSwdenk in such a variable, you need to use the run command, 2081c609719bSwdenk and you must not use the '$' sign to access them. 2082c609719bSwdenk 2083c609719bSwdenk To store commands and special characters in a 2084c609719bSwdenk variable, please use double quotation marks 2085c609719bSwdenk surrounding the whole text of the variable, instead 2086c609719bSwdenk of the backslashes before semicolons and special 2087c609719bSwdenk symbols. 2088c609719bSwdenk 2089aa0c71acSWolfgang Denk- Commandline Editing and History: 2090aa0c71acSWolfgang Denk CONFIG_CMDLINE_EDITING 2091aa0c71acSWolfgang Denk 209211ccc33fSMarcel Ziswiler Enable editing and History functions for interactive 2093aa0c71acSWolfgang Denk commandline input operations 2094aa0c71acSWolfgang Denk 2095a8c7c708Swdenk- Default Environment: 2096c609719bSwdenk CONFIG_EXTRA_ENV_SETTINGS 2097c609719bSwdenk 2098c609719bSwdenk Define this to contain any number of null terminated 2099c609719bSwdenk strings (variable = value pairs) that will be part of 21007152b1d0Swdenk the default environment compiled into the boot image. 21012262cfeeSwdenk 2102c609719bSwdenk For example, place something like this in your 2103c609719bSwdenk board's config file: 2104c609719bSwdenk 2105c609719bSwdenk #define CONFIG_EXTRA_ENV_SETTINGS \ 2106c609719bSwdenk "myvar1=value1\0" \ 2107c609719bSwdenk "myvar2=value2\0" 2108c609719bSwdenk 2109c609719bSwdenk Warning: This method is based on knowledge about the 2110c609719bSwdenk internal format how the environment is stored by the 21112262cfeeSwdenk U-Boot code. This is NOT an official, exported 2112c609719bSwdenk interface! Although it is unlikely that this format 21137152b1d0Swdenk will change soon, there is no guarantee either. 2114c609719bSwdenk You better know what you are doing here. 2115c609719bSwdenk 2116c609719bSwdenk Note: overly (ab)use of the default environment is 2117c609719bSwdenk discouraged. Make sure to check other ways to preset 211874de7aefSWolfgang Denk the environment like the "source" command or the 2119c609719bSwdenk boot command first. 2120c609719bSwdenk 2121a8c7c708Swdenk- DataFlash Support: 21222abbe075Swdenk CONFIG_HAS_DATAFLASH 21232abbe075Swdenk 21242abbe075Swdenk Defining this option enables DataFlash features and 21252abbe075Swdenk allows to read/write in Dataflash via the standard 21262abbe075Swdenk commands cp, md... 21272abbe075Swdenk 21283f85ce27Swdenk- SystemACE Support: 21293f85ce27Swdenk CONFIG_SYSTEMACE 21303f85ce27Swdenk 21313f85ce27Swdenk Adding this option adds support for Xilinx SystemACE 21323f85ce27Swdenk chips attached via some sort of local bus. The address 213311ccc33fSMarcel Ziswiler of the chip must also be defined in the 21346d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_SYSTEMACE_BASE macro. For example: 21353f85ce27Swdenk 21363f85ce27Swdenk #define CONFIG_SYSTEMACE 21376d0f6bcfSJean-Christophe PLAGNIOL-VILLARD #define CONFIG_SYS_SYSTEMACE_BASE 0xf0000000 21383f85ce27Swdenk 21393f85ce27Swdenk When SystemACE support is added, the "ace" device type 21403f85ce27Swdenk becomes available to the fat commands, i.e. fatls. 21413f85ce27Swdenk 2142ecb0ccd9SWolfgang Denk- TFTP Fixed UDP Port: 2143ecb0ccd9SWolfgang Denk CONFIG_TFTP_PORT 2144ecb0ccd9SWolfgang Denk 214528cb9375SWolfgang Denk If this is defined, the environment variable tftpsrcp 2146ecb0ccd9SWolfgang Denk is used to supply the TFTP UDP source port value. 214728cb9375SWolfgang Denk If tftpsrcp isn't defined, the normal pseudo-random port 2148ecb0ccd9SWolfgang Denk number generator is used. 2149ecb0ccd9SWolfgang Denk 215028cb9375SWolfgang Denk Also, the environment variable tftpdstp is used to supply 215128cb9375SWolfgang Denk the TFTP UDP destination port value. If tftpdstp isn't 215228cb9375SWolfgang Denk defined, the normal port 69 is used. 215328cb9375SWolfgang Denk 215428cb9375SWolfgang Denk The purpose for tftpsrcp is to allow a TFTP server to 2155ecb0ccd9SWolfgang Denk blindly start the TFTP transfer using the pre-configured 2156ecb0ccd9SWolfgang Denk target IP address and UDP port. This has the effect of 2157ecb0ccd9SWolfgang Denk "punching through" the (Windows XP) firewall, allowing 2158ecb0ccd9SWolfgang Denk the remainder of the TFTP transfer to proceed normally. 2159ecb0ccd9SWolfgang Denk A better solution is to properly configure the firewall, 2160ecb0ccd9SWolfgang Denk but sometimes that is not allowed. 2161ecb0ccd9SWolfgang Denk 2162a8c7c708Swdenk- Show boot progress: 2163c609719bSwdenk CONFIG_SHOW_BOOT_PROGRESS 2164c609719bSwdenk 2165c609719bSwdenk Defining this option allows to add some board- 2166c609719bSwdenk specific code (calling a user-provided function 2167c609719bSwdenk "show_boot_progress(int)") that enables you to show 2168c609719bSwdenk the system's boot progress on some display (for 2169c609719bSwdenk example, some LED's) on your board. At the moment, 2170c609719bSwdenk the following checkpoints are implemented: 2171c609719bSwdenk 21721372cce2SMarian BalakowiczLegacy uImage format: 21731372cce2SMarian Balakowicz 2174c609719bSwdenk Arg Where When 2175c609719bSwdenk 1 common/cmd_bootm.c before attempting to boot an image 2176c609719bSwdenk -1 common/cmd_bootm.c Image header has bad magic number 2177c609719bSwdenk 2 common/cmd_bootm.c Image header has correct magic number 2178c609719bSwdenk -2 common/cmd_bootm.c Image header has bad checksum 2179c609719bSwdenk 3 common/cmd_bootm.c Image header has correct checksum 2180c609719bSwdenk -3 common/cmd_bootm.c Image data has bad checksum 2181c609719bSwdenk 4 common/cmd_bootm.c Image data has correct checksum 2182c609719bSwdenk -4 common/cmd_bootm.c Image is for unsupported architecture 2183c609719bSwdenk 5 common/cmd_bootm.c Architecture check OK 21841372cce2SMarian Balakowicz -5 common/cmd_bootm.c Wrong Image Type (not kernel, multi) 2185c609719bSwdenk 6 common/cmd_bootm.c Image Type check OK 2186c609719bSwdenk -6 common/cmd_bootm.c gunzip uncompression error 2187c609719bSwdenk -7 common/cmd_bootm.c Unimplemented compression type 2188c609719bSwdenk 7 common/cmd_bootm.c Uncompression OK 21891372cce2SMarian Balakowicz 8 common/cmd_bootm.c No uncompress/copy overwrite error 2190c609719bSwdenk -9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX) 21911372cce2SMarian Balakowicz 21921372cce2SMarian Balakowicz 9 common/image.c Start initial ramdisk verification 21931372cce2SMarian Balakowicz -10 common/image.c Ramdisk header has bad magic number 21941372cce2SMarian Balakowicz -11 common/image.c Ramdisk header has bad checksum 21951372cce2SMarian Balakowicz 10 common/image.c Ramdisk header is OK 21961372cce2SMarian Balakowicz -12 common/image.c Ramdisk data has bad checksum 21971372cce2SMarian Balakowicz 11 common/image.c Ramdisk data has correct checksum 21981372cce2SMarian Balakowicz 12 common/image.c Ramdisk verification complete, start loading 219911ccc33fSMarcel Ziswiler -13 common/image.c Wrong Image Type (not PPC Linux ramdisk) 22001372cce2SMarian Balakowicz 13 common/image.c Start multifile image verification 22011372cce2SMarian Balakowicz 14 common/image.c No initial ramdisk, no multifile, continue. 22021372cce2SMarian Balakowicz 2203ea0364f1SPeter Tyser 15 arch/<arch>/lib/bootm.c All preparation done, transferring control to OS 2204c609719bSwdenk 2205a47a12beSStefan Roese -30 arch/powerpc/lib/board.c Fatal error, hang the system 220663e73c9aSwdenk -31 post/post.c POST test failed, detected by post_output_backlog() 220763e73c9aSwdenk -32 post/post.c POST test failed, detected by post_run_single() 220863e73c9aSwdenk 2209566a494fSHeiko Schocher 34 common/cmd_doc.c before loading a Image from a DOC device 2210566a494fSHeiko Schocher -35 common/cmd_doc.c Bad usage of "doc" command 2211566a494fSHeiko Schocher 35 common/cmd_doc.c correct usage of "doc" command 2212566a494fSHeiko Schocher -36 common/cmd_doc.c No boot device 2213566a494fSHeiko Schocher 36 common/cmd_doc.c correct boot device 2214566a494fSHeiko Schocher -37 common/cmd_doc.c Unknown Chip ID on boot device 2215566a494fSHeiko Schocher 37 common/cmd_doc.c correct chip ID found, device available 2216566a494fSHeiko Schocher -38 common/cmd_doc.c Read Error on boot device 2217566a494fSHeiko Schocher 38 common/cmd_doc.c reading Image header from DOC device OK 2218566a494fSHeiko Schocher -39 common/cmd_doc.c Image header has bad magic number 2219566a494fSHeiko Schocher 39 common/cmd_doc.c Image header has correct magic number 2220566a494fSHeiko Schocher -40 common/cmd_doc.c Error reading Image from DOC device 2221566a494fSHeiko Schocher 40 common/cmd_doc.c Image header has correct magic number 2222566a494fSHeiko Schocher 41 common/cmd_ide.c before loading a Image from a IDE device 2223566a494fSHeiko Schocher -42 common/cmd_ide.c Bad usage of "ide" command 2224566a494fSHeiko Schocher 42 common/cmd_ide.c correct usage of "ide" command 2225566a494fSHeiko Schocher -43 common/cmd_ide.c No boot device 2226566a494fSHeiko Schocher 43 common/cmd_ide.c boot device found 2227566a494fSHeiko Schocher -44 common/cmd_ide.c Device not available 2228566a494fSHeiko Schocher 44 common/cmd_ide.c Device available 2229566a494fSHeiko Schocher -45 common/cmd_ide.c wrong partition selected 2230566a494fSHeiko Schocher 45 common/cmd_ide.c partition selected 2231566a494fSHeiko Schocher -46 common/cmd_ide.c Unknown partition table 2232566a494fSHeiko Schocher 46 common/cmd_ide.c valid partition table found 2233566a494fSHeiko Schocher -47 common/cmd_ide.c Invalid partition type 2234566a494fSHeiko Schocher 47 common/cmd_ide.c correct partition type 2235566a494fSHeiko Schocher -48 common/cmd_ide.c Error reading Image Header on boot device 2236566a494fSHeiko Schocher 48 common/cmd_ide.c reading Image Header from IDE device OK 2237566a494fSHeiko Schocher -49 common/cmd_ide.c Image header has bad magic number 2238566a494fSHeiko Schocher 49 common/cmd_ide.c Image header has correct magic number 2239566a494fSHeiko Schocher -50 common/cmd_ide.c Image header has bad checksum 2240566a494fSHeiko Schocher 50 common/cmd_ide.c Image header has correct checksum 2241566a494fSHeiko Schocher -51 common/cmd_ide.c Error reading Image from IDE device 2242566a494fSHeiko Schocher 51 common/cmd_ide.c reading Image from IDE device OK 2243566a494fSHeiko Schocher 52 common/cmd_nand.c before loading a Image from a NAND device 2244566a494fSHeiko Schocher -53 common/cmd_nand.c Bad usage of "nand" command 2245566a494fSHeiko Schocher 53 common/cmd_nand.c correct usage of "nand" command 2246566a494fSHeiko Schocher -54 common/cmd_nand.c No boot device 2247566a494fSHeiko Schocher 54 common/cmd_nand.c boot device found 2248566a494fSHeiko Schocher -55 common/cmd_nand.c Unknown Chip ID on boot device 2249566a494fSHeiko Schocher 55 common/cmd_nand.c correct chip ID found, device available 2250566a494fSHeiko Schocher -56 common/cmd_nand.c Error reading Image Header on boot device 2251566a494fSHeiko Schocher 56 common/cmd_nand.c reading Image Header from NAND device OK 2252566a494fSHeiko Schocher -57 common/cmd_nand.c Image header has bad magic number 2253566a494fSHeiko Schocher 57 common/cmd_nand.c Image header has correct magic number 2254566a494fSHeiko Schocher -58 common/cmd_nand.c Error reading Image from NAND device 2255566a494fSHeiko Schocher 58 common/cmd_nand.c reading Image from NAND device OK 2256c609719bSwdenk 2257566a494fSHeiko Schocher -60 common/env_common.c Environment has a bad CRC, using default 2258c609719bSwdenk 2259566a494fSHeiko Schocher 64 net/eth.c starting with Ethernet configuration. 2260566a494fSHeiko Schocher -64 net/eth.c no Ethernet found. 2261566a494fSHeiko Schocher 65 net/eth.c Ethernet found. 2262206c60cbSwdenk 2263566a494fSHeiko Schocher -80 common/cmd_net.c usage wrong 2264566a494fSHeiko Schocher 80 common/cmd_net.c before calling NetLoop() 226511ccc33fSMarcel Ziswiler -81 common/cmd_net.c some error in NetLoop() occurred 2266566a494fSHeiko Schocher 81 common/cmd_net.c NetLoop() back without error 2267566a494fSHeiko Schocher -82 common/cmd_net.c size == 0 (File with size 0 loaded) 2268566a494fSHeiko Schocher 82 common/cmd_net.c trying automatic boot 226974de7aefSWolfgang Denk 83 common/cmd_net.c running "source" command 227074de7aefSWolfgang Denk -83 common/cmd_net.c some error in automatic boot or "source" command 2271566a494fSHeiko Schocher 84 common/cmd_net.c end without errors 2272c609719bSwdenk 22731372cce2SMarian BalakowiczFIT uImage format: 22741372cce2SMarian Balakowicz 22751372cce2SMarian Balakowicz Arg Where When 22761372cce2SMarian Balakowicz 100 common/cmd_bootm.c Kernel FIT Image has correct format 22771372cce2SMarian Balakowicz -100 common/cmd_bootm.c Kernel FIT Image has incorrect format 22781372cce2SMarian Balakowicz 101 common/cmd_bootm.c No Kernel subimage unit name, using configuration 22791372cce2SMarian Balakowicz -101 common/cmd_bootm.c Can't get configuration for kernel subimage 22801372cce2SMarian Balakowicz 102 common/cmd_bootm.c Kernel unit name specified 22811372cce2SMarian Balakowicz -103 common/cmd_bootm.c Can't get kernel subimage node offset 2282f773bea8SMarian Balakowicz 103 common/cmd_bootm.c Found configuration node 22831372cce2SMarian Balakowicz 104 common/cmd_bootm.c Got kernel subimage node offset 22841372cce2SMarian Balakowicz -104 common/cmd_bootm.c Kernel subimage hash verification failed 22851372cce2SMarian Balakowicz 105 common/cmd_bootm.c Kernel subimage hash verification OK 22861372cce2SMarian Balakowicz -105 common/cmd_bootm.c Kernel subimage is for unsupported architecture 22871372cce2SMarian Balakowicz 106 common/cmd_bootm.c Architecture check OK 228811ccc33fSMarcel Ziswiler -106 common/cmd_bootm.c Kernel subimage has wrong type 228911ccc33fSMarcel Ziswiler 107 common/cmd_bootm.c Kernel subimage type OK 22901372cce2SMarian Balakowicz -107 common/cmd_bootm.c Can't get kernel subimage data/size 22911372cce2SMarian Balakowicz 108 common/cmd_bootm.c Got kernel subimage data/size 22921372cce2SMarian Balakowicz -108 common/cmd_bootm.c Wrong image type (not legacy, FIT) 22931372cce2SMarian Balakowicz -109 common/cmd_bootm.c Can't get kernel subimage type 22941372cce2SMarian Balakowicz -110 common/cmd_bootm.c Can't get kernel subimage comp 22951372cce2SMarian Balakowicz -111 common/cmd_bootm.c Can't get kernel subimage os 22961372cce2SMarian Balakowicz -112 common/cmd_bootm.c Can't get kernel subimage load address 22971372cce2SMarian Balakowicz -113 common/cmd_bootm.c Image uncompress/copy overwrite error 22981372cce2SMarian Balakowicz 22991372cce2SMarian Balakowicz 120 common/image.c Start initial ramdisk verification 23001372cce2SMarian Balakowicz -120 common/image.c Ramdisk FIT image has incorrect format 23011372cce2SMarian Balakowicz 121 common/image.c Ramdisk FIT image has correct format 230211ccc33fSMarcel Ziswiler 122 common/image.c No ramdisk subimage unit name, using configuration 23031372cce2SMarian Balakowicz -122 common/image.c Can't get configuration for ramdisk subimage 23041372cce2SMarian Balakowicz 123 common/image.c Ramdisk unit name specified 23051372cce2SMarian Balakowicz -124 common/image.c Can't get ramdisk subimage node offset 23061372cce2SMarian Balakowicz 125 common/image.c Got ramdisk subimage node offset 23071372cce2SMarian Balakowicz -125 common/image.c Ramdisk subimage hash verification failed 23081372cce2SMarian Balakowicz 126 common/image.c Ramdisk subimage hash verification OK 23091372cce2SMarian Balakowicz -126 common/image.c Ramdisk subimage for unsupported architecture 23101372cce2SMarian Balakowicz 127 common/image.c Architecture check OK 23111372cce2SMarian Balakowicz -127 common/image.c Can't get ramdisk subimage data/size 23121372cce2SMarian Balakowicz 128 common/image.c Got ramdisk subimage data/size 23131372cce2SMarian Balakowicz 129 common/image.c Can't get ramdisk load address 23141372cce2SMarian Balakowicz -129 common/image.c Got ramdisk load address 23151372cce2SMarian Balakowicz 231611ccc33fSMarcel Ziswiler -130 common/cmd_doc.c Incorrect FIT image format 23171372cce2SMarian Balakowicz 131 common/cmd_doc.c FIT image format OK 23181372cce2SMarian Balakowicz 231911ccc33fSMarcel Ziswiler -140 common/cmd_ide.c Incorrect FIT image format 23201372cce2SMarian Balakowicz 141 common/cmd_ide.c FIT image format OK 23211372cce2SMarian Balakowicz 232211ccc33fSMarcel Ziswiler -150 common/cmd_nand.c Incorrect FIT image format 23231372cce2SMarian Balakowicz 151 common/cmd_nand.c FIT image format OK 23241372cce2SMarian Balakowicz 23254cf2609bSWolfgang Denk- Standalone program support: 23264cf2609bSWolfgang Denk CONFIG_STANDALONE_LOAD_ADDR 23274cf2609bSWolfgang Denk 23286feff899SWolfgang Denk This option defines a board specific value for the 23296feff899SWolfgang Denk address where standalone program gets loaded, thus 23306feff899SWolfgang Denk overwriting the architecture dependent default 23314cf2609bSWolfgang Denk settings. 23324cf2609bSWolfgang Denk 23334cf2609bSWolfgang Denk- Frame Buffer Address: 23344cf2609bSWolfgang Denk CONFIG_FB_ADDR 23354cf2609bSWolfgang Denk 23364cf2609bSWolfgang Denk Define CONFIG_FB_ADDR if you want to use specific 23374cf2609bSWolfgang Denk address for frame buffer. 23384cf2609bSWolfgang Denk Then system will reserve the frame buffer address to 23394cf2609bSWolfgang Denk defined address instead of lcd_setmem (this function 23406feff899SWolfgang Denk grabs the memory for frame buffer by panel's size). 23414cf2609bSWolfgang Denk 23424cf2609bSWolfgang Denk Please see board_init_f function. 23434cf2609bSWolfgang Denk 2344cccfc2abSDetlev Zundel- Automatic software updates via TFTP server 2345cccfc2abSDetlev Zundel CONFIG_UPDATE_TFTP 2346cccfc2abSDetlev Zundel CONFIG_UPDATE_TFTP_CNT_MAX 2347cccfc2abSDetlev Zundel CONFIG_UPDATE_TFTP_MSEC_MAX 2348cccfc2abSDetlev Zundel 2349cccfc2abSDetlev Zundel These options enable and control the auto-update feature; 2350cccfc2abSDetlev Zundel for a more detailed description refer to doc/README.update. 2351cccfc2abSDetlev Zundel 2352cccfc2abSDetlev Zundel- MTD Support (mtdparts command, UBI support) 2353cccfc2abSDetlev Zundel CONFIG_MTD_DEVICE 2354cccfc2abSDetlev Zundel 2355cccfc2abSDetlev Zundel Adds the MTD device infrastructure from the Linux kernel. 2356cccfc2abSDetlev Zundel Needed for mtdparts command support. 2357cccfc2abSDetlev Zundel 2358cccfc2abSDetlev Zundel CONFIG_MTD_PARTITIONS 2359cccfc2abSDetlev Zundel 2360cccfc2abSDetlev Zundel Adds the MTD partitioning infrastructure from the Linux 2361cccfc2abSDetlev Zundel kernel. Needed for UBI support. 2362cccfc2abSDetlev Zundel 23636a11cf48SDaniel Schwierzeck- SPL framework 23646a11cf48SDaniel Schwierzeck CONFIG_SPL 23656a11cf48SDaniel Schwierzeck Enable building of SPL globally. 23666a11cf48SDaniel Schwierzeck 23676a11cf48SDaniel Schwierzeck CONFIG_SPL_TEXT_BASE 23686a11cf48SDaniel Schwierzeck TEXT_BASE for linking the SPL binary. 23696a11cf48SDaniel Schwierzeck 23706a11cf48SDaniel Schwierzeck CONFIG_SPL_LDSCRIPT 23716a11cf48SDaniel Schwierzeck LDSCRIPT for linking the SPL binary. 23726a11cf48SDaniel Schwierzeck 23736a11cf48SDaniel Schwierzeck CONFIG_SPL_LIBCOMMON_SUPPORT 23746a11cf48SDaniel Schwierzeck Support for common/libcommon.o in SPL binary 23756a11cf48SDaniel Schwierzeck 23766a11cf48SDaniel Schwierzeck CONFIG_SPL_LIBDISK_SUPPORT 23776a11cf48SDaniel Schwierzeck Support for disk/libdisk.o in SPL binary 23786a11cf48SDaniel Schwierzeck 23796a11cf48SDaniel Schwierzeck CONFIG_SPL_I2C_SUPPORT 23806a11cf48SDaniel Schwierzeck Support for drivers/i2c/libi2c.o in SPL binary 23816a11cf48SDaniel Schwierzeck 23826a11cf48SDaniel Schwierzeck CONFIG_SPL_GPIO_SUPPORT 23836a11cf48SDaniel Schwierzeck Support for drivers/gpio/libgpio.o in SPL binary 23846a11cf48SDaniel Schwierzeck 23856a11cf48SDaniel Schwierzeck CONFIG_SPL_MMC_SUPPORT 23866a11cf48SDaniel Schwierzeck Support for drivers/mmc/libmmc.o in SPL binary 23876a11cf48SDaniel Schwierzeck 23886a11cf48SDaniel Schwierzeck CONFIG_SPL_SERIAL_SUPPORT 23896a11cf48SDaniel Schwierzeck Support for drivers/serial/libserial.o in SPL binary 23906a11cf48SDaniel Schwierzeck 23916a11cf48SDaniel Schwierzeck CONFIG_SPL_SPI_FLASH_SUPPORT 23926a11cf48SDaniel Schwierzeck Support for drivers/mtd/spi/libspi_flash.o in SPL binary 23936a11cf48SDaniel Schwierzeck 23946a11cf48SDaniel Schwierzeck CONFIG_SPL_SPI_SUPPORT 23956a11cf48SDaniel Schwierzeck Support for drivers/spi/libspi.o in SPL binary 23966a11cf48SDaniel Schwierzeck 23976a11cf48SDaniel Schwierzeck CONFIG_SPL_FAT_SUPPORT 23986a11cf48SDaniel Schwierzeck Support for fs/fat/libfat.o in SPL binary 23996a11cf48SDaniel Schwierzeck 24006a11cf48SDaniel Schwierzeck CONFIG_SPL_LIBGENERIC_SUPPORT 24016a11cf48SDaniel Schwierzeck Support for lib/libgeneric.o in SPL binary 24021372cce2SMarian Balakowicz 2403c609719bSwdenkModem Support: 2404c609719bSwdenk-------------- 2405c609719bSwdenk 2406566e5cf4SWolfgang Denk[so far only for SMDK2400 boards] 2407c609719bSwdenk 240811ccc33fSMarcel Ziswiler- Modem support enable: 2409c609719bSwdenk CONFIG_MODEM_SUPPORT 2410c609719bSwdenk 2411c609719bSwdenk- RTS/CTS Flow control enable: 2412c609719bSwdenk CONFIG_HWFLOW 2413c609719bSwdenk 2414c609719bSwdenk- Modem debug support: 2415c609719bSwdenk CONFIG_MODEM_SUPPORT_DEBUG 2416c609719bSwdenk 2417c609719bSwdenk Enables debugging stuff (char screen[1024], dbg()) 2418c609719bSwdenk for modem support. Useful only with BDI2000. 2419c609719bSwdenk 2420a8c7c708Swdenk- Interrupt support (PPC): 2421a8c7c708Swdenk 2422a8c7c708Swdenk There are common interrupt_init() and timer_interrupt() 2423a8c7c708Swdenk for all PPC archs. interrupt_init() calls interrupt_init_cpu() 242411ccc33fSMarcel Ziswiler for CPU specific initialization. interrupt_init_cpu() 2425a8c7c708Swdenk should set decrementer_count to appropriate value. If 242611ccc33fSMarcel Ziswiler CPU resets decrementer automatically after interrupt 2427a8c7c708Swdenk (ppc4xx) it should set decrementer_count to zero. 242811ccc33fSMarcel Ziswiler timer_interrupt() calls timer_interrupt_cpu() for CPU 2429a8c7c708Swdenk specific handling. If board has watchdog / status_led 2430a8c7c708Swdenk / other_activity_monitor it works automatically from 2431a8c7c708Swdenk general timer_interrupt(). 2432a8c7c708Swdenk 2433c609719bSwdenk- General: 2434c609719bSwdenk 2435c609719bSwdenk In the target system modem support is enabled when a 2436c609719bSwdenk specific key (key combination) is pressed during 2437c609719bSwdenk power-on. Otherwise U-Boot will boot normally 243811ccc33fSMarcel Ziswiler (autoboot). The key_pressed() function is called from 2439c609719bSwdenk board_init(). Currently key_pressed() is a dummy 2440c609719bSwdenk function, returning 1 and thus enabling modem 2441c609719bSwdenk initialization. 2442c609719bSwdenk 2443c609719bSwdenk If there are no modem init strings in the 2444c609719bSwdenk environment, U-Boot proceed to autoboot; the 2445c609719bSwdenk previous output (banner, info printfs) will be 244611ccc33fSMarcel Ziswiler suppressed, though. 2447c609719bSwdenk 2448c609719bSwdenk See also: doc/README.Modem 2449c609719bSwdenk 2450c609719bSwdenk 2451c609719bSwdenkConfiguration Settings: 2452c609719bSwdenk----------------------- 2453c609719bSwdenk 24546d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_LONGHELP: Defined when you want long help messages included; 2455c609719bSwdenk undefine this when you're short of memory. 2456c609719bSwdenk 24572fb2604dSPeter Tyser- CONFIG_SYS_HELP_CMD_WIDTH: Defined when you want to override the default 24582fb2604dSPeter Tyser width of the commands listed in the 'help' command output. 24592fb2604dSPeter Tyser 24606d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PROMPT: This is what U-Boot prints on the console to 2461c609719bSwdenk prompt for user input. 2462c609719bSwdenk 24636d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CBSIZE: Buffer size for input from the Console 2464c609719bSwdenk 24656d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PBSIZE: Buffer size for Console output 2466c609719bSwdenk 24676d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAXARGS: max. Number of arguments accepted for monitor commands 2468c609719bSwdenk 24696d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_BARGSIZE: Buffer size for Boot Arguments which are passed to 2470c609719bSwdenk the application (usually a Linux kernel) when it is 2471c609719bSwdenk booted 2472c609719bSwdenk 24736d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_BAUDRATE_TABLE: 2474c609719bSwdenk List of legal baudrate settings for this board. 2475c609719bSwdenk 24766d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CONSOLE_INFO_QUIET 2477c609719bSwdenk Suppress display of console information at boot. 2478c609719bSwdenk 24796d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CONSOLE_IS_IN_ENV 2480c609719bSwdenk If the board specific function 2481c609719bSwdenk extern int overwrite_console (void); 2482c609719bSwdenk returns 1, the stdin, stderr and stdout are switched to the 2483c609719bSwdenk serial port, else the settings in the environment are used. 2484c609719bSwdenk 24856d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 2486c609719bSwdenk Enable the call to overwrite_console(). 2487c609719bSwdenk 24886d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CONSOLE_ENV_OVERWRITE 2489c609719bSwdenk Enable overwrite of previous console environment settings. 2490c609719bSwdenk 24916d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END: 2492c609719bSwdenk Begin and End addresses of the area used by the 2493c609719bSwdenk simple memory test. 2494c609719bSwdenk 24956d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_ALT_MEMTEST: 2496c609719bSwdenk Enable an alternate, more extensive memory test. 2497c609719bSwdenk 24986d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MEMTEST_SCRATCH: 24995f535fe1Swdenk Scratch address used by the alternate memory test 25005f535fe1Swdenk You only need to set this if address zero isn't writeable 25015f535fe1Swdenk 25026d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MEM_TOP_HIDE (PPC only): 25036d0f6bcfSJean-Christophe PLAGNIOL-VILLARD If CONFIG_SYS_MEM_TOP_HIDE is defined in the board config header, 250414f73ca6SStefan Roese this specified memory area will get subtracted from the top 250511ccc33fSMarcel Ziswiler (end) of RAM and won't get "touched" at all by U-Boot. By 250614f73ca6SStefan Roese fixing up gd->ram_size the Linux kernel should gets passed 250714f73ca6SStefan Roese the now "corrected" memory size and won't touch it either. 250814f73ca6SStefan Roese This should work for arch/ppc and arch/powerpc. Only Linux 25095e12e75dSStefan Roese board ports in arch/powerpc with bootwrapper support that 251014f73ca6SStefan Roese recalculate the memory size from the SDRAM controller setup 25115e12e75dSStefan Roese will have to get fixed in Linux additionally. 251214f73ca6SStefan Roese 251314f73ca6SStefan Roese This option can be used as a workaround for the 440EPx/GRx 251414f73ca6SStefan Roese CHIP 11 errata where the last 256 bytes in SDRAM shouldn't 251514f73ca6SStefan Roese be touched. 251614f73ca6SStefan Roese 251714f73ca6SStefan Roese WARNING: Please make sure that this value is a multiple of 251814f73ca6SStefan Roese the Linux page size (normally 4k). If this is not the case, 251914f73ca6SStefan Roese then the end address of the Linux memory will be located at a 252014f73ca6SStefan Roese non page size aligned address and this could cause major 252114f73ca6SStefan Roese problems. 252214f73ca6SStefan Roese 25236d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_TFTP_LOADADDR: 2524c609719bSwdenk Default load address for network file downloads 2525c609719bSwdenk 25266d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_LOADS_BAUD_CHANGE: 2527c609719bSwdenk Enable temporary baudrate change while serial download 2528c609719bSwdenk 25296d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SDRAM_BASE: 2530c609719bSwdenk Physical start address of SDRAM. _Must_ be 0 here. 2531c609719bSwdenk 25326d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MBIO_BASE: 2533c609719bSwdenk Physical start address of Motherboard I/O (if using a 2534c609719bSwdenk Cogent motherboard) 2535c609719bSwdenk 25366d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_BASE: 2537c609719bSwdenk Physical start address of Flash memory. 2538c609719bSwdenk 25396d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MONITOR_BASE: 2540c609719bSwdenk Physical start address of boot monitor code (set by 2541c609719bSwdenk make config files to be same as the text base address 254214d0a02aSWolfgang Denk (CONFIG_SYS_TEXT_BASE) used when linking) - same as 25436d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FLASH_BASE when booting from flash. 2544c609719bSwdenk 25456d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MONITOR_LEN: 25463b57fe0aSwdenk Size of memory reserved for monitor code, used to 25473b57fe0aSwdenk determine _at_compile_time_ (!) if the environment is 25483b57fe0aSwdenk embedded within the U-Boot image, or in a separate 25493b57fe0aSwdenk flash sector. 2550c609719bSwdenk 25516d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MALLOC_LEN: 2552c609719bSwdenk Size of DRAM reserved for malloc() use. 2553c609719bSwdenk 25546d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_BOOTM_LEN: 255515940c9aSStefan Roese Normally compressed uImages are limited to an 255615940c9aSStefan Roese uncompressed size of 8 MBytes. If this is not enough, 25576d0f6bcfSJean-Christophe PLAGNIOL-VILLARD you can define CONFIG_SYS_BOOTM_LEN in your board config file 255815940c9aSStefan Roese to adjust this setting to your needs. 2559c609719bSwdenk 25606d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_BOOTMAPSZ: 2561c609719bSwdenk Maximum size of memory mapped by the startup code of 2562c609719bSwdenk the Linux kernel; all data that must be processed by 25637d721e34SBartlomiej Sieka the Linux kernel (bd_info, boot arguments, FDT blob if 25647d721e34SBartlomiej Sieka used) must be put below this limit, unless "bootm_low" 25657d721e34SBartlomiej Sieka enviroment variable is defined and non-zero. In such case 25667d721e34SBartlomiej Sieka all data for the Linux kernel must be between "bootm_low" 2567c3624e6eSGrant Likely and "bootm_low" + CONFIG_SYS_BOOTMAPSZ. The environment 2568c3624e6eSGrant Likely variable "bootm_mapsize" will override the value of 2569c3624e6eSGrant Likely CONFIG_SYS_BOOTMAPSZ. If CONFIG_SYS_BOOTMAPSZ is undefined, 2570c3624e6eSGrant Likely then the value in "bootm_size" will be used instead. 2571c609719bSwdenk 2572fca43cc8SJohn Rigby- CONFIG_SYS_BOOT_RAMDISK_HIGH: 2573fca43cc8SJohn Rigby Enable initrd_high functionality. If defined then the 2574fca43cc8SJohn Rigby initrd_high feature is enabled and the bootm ramdisk subcommand 2575fca43cc8SJohn Rigby is enabled. 2576fca43cc8SJohn Rigby 2577fca43cc8SJohn Rigby- CONFIG_SYS_BOOT_GET_CMDLINE: 2578fca43cc8SJohn Rigby Enables allocating and saving kernel cmdline in space between 2579fca43cc8SJohn Rigby "bootm_low" and "bootm_low" + BOOTMAPSZ. 2580fca43cc8SJohn Rigby 2581fca43cc8SJohn Rigby- CONFIG_SYS_BOOT_GET_KBD: 2582fca43cc8SJohn Rigby Enables allocating and saving a kernel copy of the bd_info in 2583fca43cc8SJohn Rigby space between "bootm_low" and "bootm_low" + BOOTMAPSZ. 2584fca43cc8SJohn Rigby 25856d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAX_FLASH_BANKS: 2586c609719bSwdenk Max number of Flash memory banks 2587c609719bSwdenk 25886d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAX_FLASH_SECT: 2589c609719bSwdenk Max number of sectors on a Flash chip 2590c609719bSwdenk 25916d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_ERASE_TOUT: 2592c609719bSwdenk Timeout for Flash erase operations (in ms) 2593c609719bSwdenk 25946d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_WRITE_TOUT: 2595c609719bSwdenk Timeout for Flash write operations (in ms) 2596c609719bSwdenk 25976d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_LOCK_TOUT 25988564acf9Swdenk Timeout for Flash set sector lock bit operation (in ms) 25998564acf9Swdenk 26006d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_UNLOCK_TOUT 26018564acf9Swdenk Timeout for Flash clear lock bits operation (in ms) 26028564acf9Swdenk 26036d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_PROTECTION 26048564acf9Swdenk If defined, hardware flash sectors protection is used 26058564acf9Swdenk instead of U-Boot software protection. 26068564acf9Swdenk 26076d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_DIRECT_FLASH_TFTP: 2608c609719bSwdenk 2609c609719bSwdenk Enable TFTP transfers directly to flash memory; 2610c609719bSwdenk without this option such a download has to be 2611c609719bSwdenk performed in two steps: (1) download to RAM, and (2) 2612c609719bSwdenk copy from RAM to flash. 2613c609719bSwdenk 2614c609719bSwdenk The two-step approach is usually more reliable, since 2615c609719bSwdenk you can check if the download worked before you erase 261611ccc33fSMarcel Ziswiler the flash, but in some situations (when system RAM is 261711ccc33fSMarcel Ziswiler too limited to allow for a temporary copy of the 2618c609719bSwdenk downloaded image) this option may be very useful. 2619c609719bSwdenk 26206d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_CFI: 2621c609719bSwdenk Define if the flash driver uses extra elements in the 26225653fc33Swdenk common flash structure for storing flash geometry. 26235653fc33Swdenk 262400b1883aSJean-Christophe PLAGNIOL-VILLARD- CONFIG_FLASH_CFI_DRIVER 26255653fc33Swdenk This option also enables the building of the cfi_flash driver 26265653fc33Swdenk in the drivers directory 262753cf9435Sstroese 262891809ed5SPiotr Ziecik- CONFIG_FLASH_CFI_MTD 262991809ed5SPiotr Ziecik This option enables the building of the cfi_mtd driver 263091809ed5SPiotr Ziecik in the drivers directory. The driver exports CFI flash 263191809ed5SPiotr Ziecik to the MTD layer. 263291809ed5SPiotr Ziecik 26336d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_USE_BUFFER_WRITE 263496ef831fSGuennadi Liakhovetski Use buffered writes to flash. 263596ef831fSGuennadi Liakhovetski 263696ef831fSGuennadi Liakhovetski- CONFIG_FLASH_SPANSION_S29WS_N 263796ef831fSGuennadi Liakhovetski s29ws-n MirrorBit flash has non-standard addresses for buffered 263896ef831fSGuennadi Liakhovetski write commands. 263996ef831fSGuennadi Liakhovetski 26406d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_QUIET_TEST 26415568e613SStefan Roese If this option is defined, the common CFI flash doesn't 26425568e613SStefan Roese print it's warning upon not recognized FLASH banks. This 26435568e613SStefan Roese is useful, if some of the configured banks are only 26445568e613SStefan Roese optionally available. 26455568e613SStefan Roese 26469a042e9cSJerry Van Baren- CONFIG_FLASH_SHOW_PROGRESS 26479a042e9cSJerry Van Baren If defined (must be an integer), print out countdown 26489a042e9cSJerry Van Baren digits and dots. Recommended value: 45 (9..1) for 80 26499a042e9cSJerry Van Baren column displays, 15 (3..1) for 40 column displays. 26509a042e9cSJerry Van Baren 26516d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_RX_ETH_BUFFER: 265211ccc33fSMarcel Ziswiler Defines the number of Ethernet receive buffers. On some 265311ccc33fSMarcel Ziswiler Ethernet controllers it is recommended to set this value 265453cf9435Sstroese to 8 or even higher (EEPRO100 or 405 EMAC), since all 265553cf9435Sstroese buffers can be full shortly after enabling the interface 265611ccc33fSMarcel Ziswiler on high Ethernet traffic. 265753cf9435Sstroese Defaults to 4 if not defined. 2658c609719bSwdenk 2659ea882bafSWolfgang Denk- CONFIG_ENV_MAX_ENTRIES 2660ea882bafSWolfgang Denk 2661ea882bafSWolfgang Denk Maximum number of entries in the hash table that is used 2662ea882bafSWolfgang Denk internally to store the environment settings. The default 2663ea882bafSWolfgang Denk setting is supposed to be generous and should work in most 2664ea882bafSWolfgang Denk cases. This setting can be used to tune behaviour; see 2665ea882bafSWolfgang Denk lib/hashtable.c for details. 2666ea882bafSWolfgang Denk 2667c609719bSwdenkThe following definitions that deal with the placement and management 2668c609719bSwdenkof environment data (variable area); in general, we support the 2669c609719bSwdenkfollowing configurations: 2670c609719bSwdenk 2671c3eb3fe4SMike Frysinger- CONFIG_BUILD_ENVCRC: 2672c3eb3fe4SMike Frysinger 2673c3eb3fe4SMike Frysinger Builds up envcrc with the target environment so that external utils 2674c3eb3fe4SMike Frysinger may easily extract it and embed it in final U-Boot images. 2675c3eb3fe4SMike Frysinger 26765a1aceb0SJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_FLASH: 2677c609719bSwdenk 2678c609719bSwdenk Define this if the environment is in flash memory. 2679c609719bSwdenk 2680c609719bSwdenk a) The environment occupies one whole flash sector, which is 2681c609719bSwdenk "embedded" in the text segment with the U-Boot code. This 2682c609719bSwdenk happens usually with "bottom boot sector" or "top boot 2683c609719bSwdenk sector" type flash chips, which have several smaller 2684c609719bSwdenk sectors at the start or the end. For instance, such a 2685c609719bSwdenk layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In 2686c609719bSwdenk such a case you would place the environment in one of the 2687c609719bSwdenk 4 kB sectors - with U-Boot code before and after it. With 2688c609719bSwdenk "top boot sector" type flash chips, you would put the 2689c609719bSwdenk environment in one of the last sectors, leaving a gap 2690c609719bSwdenk between U-Boot and the environment. 2691c609719bSwdenk 26920e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_OFFSET: 2693c609719bSwdenk 2694c609719bSwdenk Offset of environment data (variable area) to the 2695c609719bSwdenk beginning of flash memory; for instance, with bottom boot 2696c609719bSwdenk type flash chips the second sector can be used: the offset 2697c609719bSwdenk for this sector is given here. 2698c609719bSwdenk 26996d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE. 2700c609719bSwdenk 27010e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_ADDR: 2702c609719bSwdenk 2703c609719bSwdenk This is just another way to specify the start address of 2704c609719bSwdenk the flash sector containing the environment (instead of 27050e8d1586SJean-Christophe PLAGNIOL-VILLARD CONFIG_ENV_OFFSET). 2706c609719bSwdenk 27070e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SECT_SIZE: 2708c609719bSwdenk 2709c609719bSwdenk Size of the sector containing the environment. 2710c609719bSwdenk 2711c609719bSwdenk 2712c609719bSwdenk b) Sometimes flash chips have few, equal sized, BIG sectors. 2713c609719bSwdenk In such a case you don't want to spend a whole sector for 2714c609719bSwdenk the environment. 2715c609719bSwdenk 27160e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SIZE: 2717c609719bSwdenk 27185a1aceb0SJean-Christophe PLAGNIOL-VILLARD If you use this in combination with CONFIG_ENV_IS_IN_FLASH 27190e8d1586SJean-Christophe PLAGNIOL-VILLARD and CONFIG_ENV_SECT_SIZE, you can specify to use only a part 2720c609719bSwdenk of this flash sector for the environment. This saves 2721c609719bSwdenk memory for the RAM copy of the environment. 2722c609719bSwdenk 2723c609719bSwdenk It may also save flash memory if you decide to use this 2724c609719bSwdenk when your environment is "embedded" within U-Boot code, 2725c609719bSwdenk since then the remainder of the flash sector could be used 2726c609719bSwdenk for U-Boot code. It should be pointed out that this is 2727c609719bSwdenk STRONGLY DISCOURAGED from a robustness point of view: 2728c609719bSwdenk updating the environment in flash makes it always 2729c609719bSwdenk necessary to erase the WHOLE sector. If something goes 2730c609719bSwdenk wrong before the contents has been restored from a copy in 2731c609719bSwdenk RAM, your target system will be dead. 2732c609719bSwdenk 27330e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_ADDR_REDUND 27340e8d1586SJean-Christophe PLAGNIOL-VILLARD CONFIG_ENV_SIZE_REDUND 2735c609719bSwdenk 2736c609719bSwdenk These settings describe a second storage area used to hold 273711ccc33fSMarcel Ziswiler a redundant copy of the environment data, so that there is 27383e38691eSwdenk a valid backup copy in case there is a power failure during 2739c609719bSwdenk a "saveenv" operation. 2740c609719bSwdenk 2741c609719bSwdenkBE CAREFUL! Any changes to the flash layout, and some changes to the 2742c609719bSwdenksource code will make it necessary to adapt <board>/u-boot.lds* 2743c609719bSwdenkaccordingly! 2744c609719bSwdenk 2745c609719bSwdenk 27469314cee6SJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_NVRAM: 2747c609719bSwdenk 2748c609719bSwdenk Define this if you have some non-volatile memory device 2749c609719bSwdenk (NVRAM, battery buffered SRAM) which you want to use for the 2750c609719bSwdenk environment. 2751c609719bSwdenk 27520e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_ADDR: 27530e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SIZE: 2754c609719bSwdenk 275511ccc33fSMarcel Ziswiler These two #defines are used to determine the memory area you 2756c609719bSwdenk want to use for environment. It is assumed that this memory 2757c609719bSwdenk can just be read and written to, without any special 2758c609719bSwdenk provision. 2759c609719bSwdenk 2760c609719bSwdenkBE CAREFUL! The first access to the environment happens quite early 2761c609719bSwdenkin U-Boot initalization (when we try to get the setting of for the 276211ccc33fSMarcel Ziswilerconsole baudrate). You *MUST* have mapped your NVRAM area then, or 2763c609719bSwdenkU-Boot will hang. 2764c609719bSwdenk 2765c609719bSwdenkPlease note that even with NVRAM we still use a copy of the 2766c609719bSwdenkenvironment in RAM: we could work on NVRAM directly, but we want to 2767c609719bSwdenkkeep settings there always unmodified except somebody uses "saveenv" 2768c609719bSwdenkto save the current settings. 2769c609719bSwdenk 2770c609719bSwdenk 2771bb1f8b4fSJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_EEPROM: 2772c609719bSwdenk 2773c609719bSwdenk Use this if you have an EEPROM or similar serial access 2774c609719bSwdenk device and a driver for it. 2775c609719bSwdenk 27760e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_OFFSET: 27770e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SIZE: 2778c609719bSwdenk 2779c609719bSwdenk These two #defines specify the offset and size of the 2780c609719bSwdenk environment area within the total memory of your EEPROM. 2781c609719bSwdenk 27826d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_I2C_EEPROM_ADDR: 2783c609719bSwdenk If defined, specified the chip address of the EEPROM device. 2784c609719bSwdenk The default address is zero. 2785c609719bSwdenk 27866d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_EEPROM_PAGE_WRITE_BITS: 2787c609719bSwdenk If defined, the number of bits used to address bytes in a 2788c609719bSwdenk single page in the EEPROM device. A 64 byte page, for example 2789c609719bSwdenk would require six bits. 2790c609719bSwdenk 27916d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS: 2792c609719bSwdenk If defined, the number of milliseconds to delay between 2793c609719bSwdenk page writes. The default is zero milliseconds. 2794c609719bSwdenk 27956d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_I2C_EEPROM_ADDR_LEN: 2796c609719bSwdenk The length in bytes of the EEPROM memory array address. Note 2797c609719bSwdenk that this is NOT the chip address length! 2798c609719bSwdenk 27996d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW: 28005cf91d6bSwdenk EEPROM chips that implement "address overflow" are ones 28015cf91d6bSwdenk like Catalyst 24WC04/08/16 which has 9/10/11 bits of 28025cf91d6bSwdenk address and the extra bits end up in the "chip address" bit 28035cf91d6bSwdenk slots. This makes a 24WC08 (1Kbyte) chip look like four 256 28045cf91d6bSwdenk byte chips. 28055cf91d6bSwdenk 28065cf91d6bSwdenk Note that we consider the length of the address field to 28075cf91d6bSwdenk still be one byte because the extra address bits are hidden 28085cf91d6bSwdenk in the chip address. 28095cf91d6bSwdenk 28106d0f6bcfSJean-Christophe PLAGNIOL-VILLARD - CONFIG_SYS_EEPROM_SIZE: 2811c609719bSwdenk The size in bytes of the EEPROM device. 2812c609719bSwdenk 2813548738b4SHeiko Schocher - CONFIG_ENV_EEPROM_IS_ON_I2C 2814548738b4SHeiko Schocher define this, if you have I2C and SPI activated, and your 2815548738b4SHeiko Schocher EEPROM, which holds the environment, is on the I2C bus. 2816548738b4SHeiko Schocher 2817548738b4SHeiko Schocher - CONFIG_I2C_ENV_EEPROM_BUS 2818548738b4SHeiko Schocher if you have an Environment on an EEPROM reached over 2819548738b4SHeiko Schocher I2C muxes, you can define here, how to reach this 2820548738b4SHeiko Schocher EEPROM. For example: 2821548738b4SHeiko Schocher 2822548738b4SHeiko Schocher #define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0" 2823548738b4SHeiko Schocher 2824548738b4SHeiko Schocher EEPROM which holds the environment, is reached over 2825548738b4SHeiko Schocher a pca9547 i2c mux with address 0x70, channel 3. 2826c609719bSwdenk 2827057c849cSJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_DATAFLASH: 28285779d8d9Swdenk 28295779d8d9Swdenk Define this if you have a DataFlash memory device which you 28305779d8d9Swdenk want to use for the environment. 28315779d8d9Swdenk 28320e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_OFFSET: 28330e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_ADDR: 28340e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SIZE: 28355779d8d9Swdenk 28365779d8d9Swdenk These three #defines specify the offset and size of the 28375779d8d9Swdenk environment area within the total memory of your DataFlash placed 28385779d8d9Swdenk at the specified address. 28395779d8d9Swdenk 284051bfee19SJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_NAND: 284113a5695bSwdenk 284213a5695bSwdenk Define this if you have a NAND device which you want to use 284313a5695bSwdenk for the environment. 284413a5695bSwdenk 28450e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_OFFSET: 28460e8d1586SJean-Christophe PLAGNIOL-VILLARD - CONFIG_ENV_SIZE: 284713a5695bSwdenk 284813a5695bSwdenk These two #defines specify the offset and size of the environment 2849fdd813deSScott Wood area within the first NAND device. CONFIG_ENV_OFFSET must be 2850fdd813deSScott Wood aligned to an erase block boundary. 28515779d8d9Swdenk 2852fdd813deSScott Wood - CONFIG_ENV_OFFSET_REDUND (optional): 2853e443c944SMarkus Klotzbuecher 28540e8d1586SJean-Christophe PLAGNIOL-VILLARD This setting describes a second storage area of CONFIG_ENV_SIZE 2855fdd813deSScott Wood size used to hold a redundant copy of the environment data, so 2856fdd813deSScott Wood that there is a valid backup copy in case there is a power failure 2857fdd813deSScott Wood during a "saveenv" operation. CONFIG_ENV_OFFSET_RENDUND must be 2858fdd813deSScott Wood aligned to an erase block boundary. 2859e443c944SMarkus Klotzbuecher 2860fdd813deSScott Wood - CONFIG_ENV_RANGE (optional): 2861fdd813deSScott Wood 2862fdd813deSScott Wood Specifies the length of the region in which the environment 2863fdd813deSScott Wood can be written. This should be a multiple of the NAND device's 2864fdd813deSScott Wood block size. Specifying a range with more erase blocks than 2865fdd813deSScott Wood are needed to hold CONFIG_ENV_SIZE allows bad blocks within 2866fdd813deSScott Wood the range to be avoided. 2867fdd813deSScott Wood 2868fdd813deSScott Wood - CONFIG_ENV_OFFSET_OOB (optional): 2869fdd813deSScott Wood 2870fdd813deSScott Wood Enables support for dynamically retrieving the offset of the 2871fdd813deSScott Wood environment from block zero's out-of-band data. The 2872fdd813deSScott Wood "nand env.oob" command can be used to record this offset. 2873fdd813deSScott Wood Currently, CONFIG_ENV_OFFSET_REDUND is not supported when 2874fdd813deSScott Wood using CONFIG_ENV_OFFSET_OOB. 2875e443c944SMarkus Klotzbuecher 2876b74ab737SGuennadi Liakhovetski- CONFIG_NAND_ENV_DST 2877b74ab737SGuennadi Liakhovetski 2878b74ab737SGuennadi Liakhovetski Defines address in RAM to which the nand_spl code should copy the 2879b74ab737SGuennadi Liakhovetski environment. If redundant environment is used, it will be copied to 2880b74ab737SGuennadi Liakhovetski CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE. 2881b74ab737SGuennadi Liakhovetski 28826d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SPI_INIT_OFFSET 2883c609719bSwdenk 2884c609719bSwdenk Defines offset to the initial SPI buffer area in DPRAM. The 2885c609719bSwdenk area is used at an early stage (ROM part) if the environment 2886c609719bSwdenk is configured to reside in the SPI EEPROM: We need a 520 byte 2887c609719bSwdenk scratch DPRAM area. It is used between the two initialization 2888c609719bSwdenk calls (spi_init_f() and spi_init_r()). A value of 0xB00 seems 2889c609719bSwdenk to be a good choice since it makes it far enough from the 2890c609719bSwdenk start of the data area as well as from the stack pointer. 2891c609719bSwdenk 2892e881cb56SBruce AdlerPlease note that the environment is read-only until the monitor 2893c609719bSwdenkhas been relocated to RAM and a RAM copy of the environment has been 2894cdb74977SWolfgang Denkcreated; also, when using EEPROM you will have to use getenv_f() 2895c609719bSwdenkuntil then to read environment variables. 2896c609719bSwdenk 289785ec0bccSwdenkThe environment is protected by a CRC32 checksum. Before the monitor 289885ec0bccSwdenkis relocated into RAM, as a result of a bad CRC you will be working 289985ec0bccSwdenkwith the compiled-in default environment - *silently*!!! [This is 290085ec0bccSwdenknecessary, because the first environment variable we need is the 290185ec0bccSwdenk"baudrate" setting for the console - if we have a bad CRC, we don't 290285ec0bccSwdenkhave any device yet where we could complain.] 2903c609719bSwdenk 2904c609719bSwdenkNote: once the monitor has been relocated, then it will complain if 2905c609719bSwdenkthe default environment is used; a new CRC is computed as soon as you 290685ec0bccSwdenkuse the "saveenv" command to store a valid environment. 2907c609719bSwdenk 29086d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FAULT_ECHO_LINK_DOWN: 2909fc3e2165Swdenk Echo the inverted Ethernet link state to the fault LED. 2910fc3e2165Swdenk 29116d0f6bcfSJean-Christophe PLAGNIOL-VILLARD Note: If this option is active, then CONFIG_SYS_FAULT_MII_ADDR 2912fc3e2165Swdenk also needs to be defined. 2913fc3e2165Swdenk 29146d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FAULT_MII_ADDR: 2915fc3e2165Swdenk MII address of the PHY to check for the Ethernet link state. 2916c609719bSwdenk 2917f5675aa5SRon Madrid- CONFIG_NS16550_MIN_FUNCTIONS: 2918f5675aa5SRon Madrid Define this if you desire to only have use of the NS16550_init 2919f5675aa5SRon Madrid and NS16550_putc functions for the serial driver located at 2920f5675aa5SRon Madrid drivers/serial/ns16550.c. This option is useful for saving 2921f5675aa5SRon Madrid space for already greatly restricted images, including but not 2922f5675aa5SRon Madrid limited to NAND_SPL configurations. 2923f5675aa5SRon Madrid 2924c609719bSwdenkLow Level (hardware related) configuration options: 2925dc7c9a1aSwdenk--------------------------------------------------- 2926c609719bSwdenk 29276d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CACHELINE_SIZE: 2928c609719bSwdenk Cache Line Size of the CPU. 2929c609719bSwdenk 29306d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_DEFAULT_IMMR: 2931c609719bSwdenk Default address of the IMMR after system reset. 29322535d602Swdenk 29332535d602Swdenk Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU, 29342535d602Swdenk and RPXsuper) to be able to adjust the position of 29352535d602Swdenk the IMMR register after a reset. 2936c609719bSwdenk 2937e46fedfeSTimur Tabi- CONFIG_SYS_CCSRBAR_DEFAULT: 2938e46fedfeSTimur Tabi Default (power-on reset) physical address of CCSR on Freescale 2939e46fedfeSTimur Tabi PowerPC SOCs. 2940e46fedfeSTimur Tabi 2941e46fedfeSTimur Tabi- CONFIG_SYS_CCSRBAR: 2942e46fedfeSTimur Tabi Virtual address of CCSR. On a 32-bit build, this is typically 2943e46fedfeSTimur Tabi the same value as CONFIG_SYS_CCSRBAR_DEFAULT. 2944e46fedfeSTimur Tabi 2945e46fedfeSTimur Tabi CONFIG_SYS_DEFAULT_IMMR must also be set to this value, 2946e46fedfeSTimur Tabi for cross-platform code that uses that macro instead. 2947e46fedfeSTimur Tabi 2948e46fedfeSTimur Tabi- CONFIG_SYS_CCSRBAR_PHYS: 2949e46fedfeSTimur Tabi Physical address of CCSR. CCSR can be relocated to a new 2950e46fedfeSTimur Tabi physical address, if desired. In this case, this macro should 2951e46fedfeSTimur Tabi be set to that address. Otherwise, it should be set to the 2952e46fedfeSTimur Tabi same value as CONFIG_SYS_CCSRBAR_DEFAULT. For example, CCSR 2953e46fedfeSTimur Tabi is typically relocated on 36-bit builds. It is recommended 2954e46fedfeSTimur Tabi that this macro be defined via the _HIGH and _LOW macros: 2955e46fedfeSTimur Tabi 2956e46fedfeSTimur Tabi #define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH 2957e46fedfeSTimur Tabi * 1ull) << 32 | CONFIG_SYS_CCSRBAR_PHYS_LOW) 2958e46fedfeSTimur Tabi 2959e46fedfeSTimur Tabi- CONFIG_SYS_CCSRBAR_PHYS_HIGH: 2960e46fedfeSTimur Tabi Bits 33-36 of CONFIG_SYS_CCSRBAR_PHYS. This value is typically 2961e46fedfeSTimur Tabi either 0 (32-bit build) or 0xF (36-bit build). This macro is 2962e46fedfeSTimur Tabi used in assembly code, so it must not contain typecasts or 2963e46fedfeSTimur Tabi integer size suffixes (e.g. "ULL"). 2964e46fedfeSTimur Tabi 2965e46fedfeSTimur Tabi- CONFIG_SYS_CCSRBAR_PHYS_LOW: 2966e46fedfeSTimur Tabi Lower 32-bits of CONFIG_SYS_CCSRBAR_PHYS. This macro is 2967e46fedfeSTimur Tabi used in assembly code, so it must not contain typecasts or 2968e46fedfeSTimur Tabi integer size suffixes (e.g. "ULL"). 2969e46fedfeSTimur Tabi 2970e46fedfeSTimur Tabi- CONFIG_SYS_CCSR_DO_NOT_RELOCATE: 2971e46fedfeSTimur Tabi If this macro is defined, then CONFIG_SYS_CCSRBAR_PHYS will be 2972e46fedfeSTimur Tabi forced to a value that ensures that CCSR is not relocated. 2973e46fedfeSTimur Tabi 29747f6c2cbcSwdenk- Floppy Disk Support: 29756d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FDC_DRIVE_NUMBER 29767f6c2cbcSwdenk 29777f6c2cbcSwdenk the default drive number (default value 0) 29787f6c2cbcSwdenk 29796d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_ISA_IO_STRIDE 29807f6c2cbcSwdenk 298111ccc33fSMarcel Ziswiler defines the spacing between FDC chipset registers 29827f6c2cbcSwdenk (default value 1) 29837f6c2cbcSwdenk 29846d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_ISA_IO_OFFSET 29857f6c2cbcSwdenk 29867f6c2cbcSwdenk defines the offset of register from address. It 29877f6c2cbcSwdenk depends on which part of the data bus is connected to 298811ccc33fSMarcel Ziswiler the FDC chipset. (default value 0) 29897f6c2cbcSwdenk 29906d0f6bcfSJean-Christophe PLAGNIOL-VILLARD If CONFIG_SYS_ISA_IO_STRIDE CONFIG_SYS_ISA_IO_OFFSET and 29916d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_FDC_DRIVE_NUMBER are undefined, they take their 29927f6c2cbcSwdenk default value. 29937f6c2cbcSwdenk 29946d0f6bcfSJean-Christophe PLAGNIOL-VILLARD if CONFIG_SYS_FDC_HW_INIT is defined, then the function 29957f6c2cbcSwdenk fdc_hw_init() is called at the beginning of the FDC 29967f6c2cbcSwdenk setup. fdc_hw_init() must be provided by the board 29977f6c2cbcSwdenk source code. It is used to make hardware dependant 29987f6c2cbcSwdenk initializations. 29997f6c2cbcSwdenk 30000abddf82SMacpaul Lin- CONFIG_IDE_AHB: 30010abddf82SMacpaul Lin Most IDE controllers were designed to be connected with PCI 30020abddf82SMacpaul Lin interface. Only few of them were designed for AHB interface. 30030abddf82SMacpaul Lin When software is doing ATA command and data transfer to 30040abddf82SMacpaul Lin IDE devices through IDE-AHB controller, some additional 30050abddf82SMacpaul Lin registers accessing to these kind of IDE-AHB controller 30060abddf82SMacpaul Lin is requierd. 30070abddf82SMacpaul Lin 30086d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_IMMR: Physical address of the Internal Memory. 300925d6712aSwdenk DO NOT CHANGE unless you know exactly what you're 301025d6712aSwdenk doing! (11-4) [MPC8xx/82xx systems only] 3011c609719bSwdenk 30126d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_INIT_RAM_ADDR: 3013c609719bSwdenk 30147152b1d0Swdenk Start address of memory area that can be used for 3015c609719bSwdenk initial data and stack; please note that this must be 3016c609719bSwdenk writable memory that is working WITHOUT special 3017c609719bSwdenk initialization, i. e. you CANNOT use normal RAM which 3018c609719bSwdenk will become available only after programming the 3019c609719bSwdenk memory controller and running certain initialization 3020c609719bSwdenk sequences. 3021c609719bSwdenk 3022c609719bSwdenk U-Boot uses the following memory types: 3023c609719bSwdenk - MPC8xx and MPC8260: IMMR (internal memory of the CPU) 3024c609719bSwdenk - MPC824X: data cache 3025c609719bSwdenk - PPC4xx: data cache 3026c609719bSwdenk 30276d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_GBL_DATA_OFFSET: 3028c609719bSwdenk 3029c609719bSwdenk Offset of the initial data structure in the memory 30306d0f6bcfSJean-Christophe PLAGNIOL-VILLARD area defined by CONFIG_SYS_INIT_RAM_ADDR. Usually 30316d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_GBL_DATA_OFFSET is chosen such that the initial 3032c609719bSwdenk data is located at the end of the available space 3033553f0982SWolfgang Denk (sometimes written as (CONFIG_SYS_INIT_RAM_SIZE - 30346d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_INIT_DATA_SIZE), and the initial stack is just 30356d0f6bcfSJean-Christophe PLAGNIOL-VILLARD below that area (growing from (CONFIG_SYS_INIT_RAM_ADDR + 30366d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_GBL_DATA_OFFSET) downward. 3037c609719bSwdenk 3038c609719bSwdenk Note: 3039c609719bSwdenk On the MPC824X (or other systems that use the data 3040c609719bSwdenk cache for initial memory) the address chosen for 30416d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_INIT_RAM_ADDR is basically arbitrary - it must 3042c609719bSwdenk point to an otherwise UNUSED address space between 3043c609719bSwdenk the top of RAM and the start of the PCI space. 3044c609719bSwdenk 30456d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SIUMCR: SIU Module Configuration (11-6) 3046c609719bSwdenk 30476d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SYPCR: System Protection Control (11-9) 3048c609719bSwdenk 30496d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_TBSCR: Time Base Status and Control (11-26) 3050c609719bSwdenk 30516d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PISCR: Periodic Interrupt Status and Control (11-31) 3052c609719bSwdenk 30536d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PLPRCR: PLL, Low-Power, and Reset Control Register (15-30) 3054c609719bSwdenk 30556d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SCCR: System Clock and reset Control Register (15-27) 3056c609719bSwdenk 30576d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_OR_TIMING_SDRAM: 3058c609719bSwdenk SDRAM timing 3059c609719bSwdenk 30606d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAMR_PTA: 3061c609719bSwdenk periodic timer for refresh 3062c609719bSwdenk 30636d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_DER: Debug Event Register (37-47) 3064c609719bSwdenk 30656d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- FLASH_BASE0_PRELIM, FLASH_BASE1_PRELIM, CONFIG_SYS_REMAP_OR_AM, 30666d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PRELIM_OR_AM, CONFIG_SYS_OR_TIMING_FLASH, CONFIG_SYS_OR0_REMAP, 30676d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR1_REMAP, CONFIG_SYS_OR1_PRELIM, 30686d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_BR1_PRELIM: 3069c609719bSwdenk Memory Controller Definitions: BR0/1 and OR0/1 (FLASH) 3070c609719bSwdenk 3071c609719bSwdenk- SDRAM_BASE2_PRELIM, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE, 30726d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_OR_TIMING_SDRAM, CONFIG_SYS_OR2_PRELIM, CONFIG_SYS_BR2_PRELIM, 30736d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_OR3_PRELIM, CONFIG_SYS_BR3_PRELIM: 3074c609719bSwdenk Memory Controller Definitions: BR2/3 and OR2/3 (SDRAM) 3075c609719bSwdenk 30766d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAMR_PTA, CONFIG_SYS_MPTPR_2BK_4K, CONFIG_SYS_MPTPR_1BK_4K, CONFIG_SYS_MPTPR_2BK_8K, 30776d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_MPTPR_1BK_8K, CONFIG_SYS_MAMR_8COL, CONFIG_SYS_MAMR_9COL: 3078c609719bSwdenk Machine Mode Register and Memory Periodic Timer 3079c609719bSwdenk Prescaler definitions (SDRAM timing) 3080c609719bSwdenk 30816d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_I2C_UCODE_PATCH, CONFIG_SYS_I2C_DPMEM_OFFSET [0x1FC0]: 3082c609719bSwdenk enable I2C microcode relocation patch (MPC8xx); 3083c609719bSwdenk define relocation offset in DPRAM [DSP2] 3084c609719bSwdenk 30856d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SMC_UCODE_PATCH, CONFIG_SYS_SMC_DPMEM_OFFSET [0x1FC0]: 3086b423d055SHeiko Schocher enable SMC microcode relocation patch (MPC8xx); 3087b423d055SHeiko Schocher define relocation offset in DPRAM [SMC1] 3088b423d055SHeiko Schocher 30896d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SPI_UCODE_PATCH, CONFIG_SYS_SPI_DPMEM_OFFSET [0x1FC0]: 3090c609719bSwdenk enable SPI microcode relocation patch (MPC8xx); 3091c609719bSwdenk define relocation offset in DPRAM [SCC4] 3092c609719bSwdenk 30936d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_USE_OSCCLK: 3094c609719bSwdenk Use OSCM clock mode on MBX8xx board. Be careful, 3095c609719bSwdenk wrong setting might damage your board. Read 3096c609719bSwdenk doc/README.MBX before setting this variable! 3097c609719bSwdenk 30986d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CPM_POST_WORD_ADDR: (MPC8xx, MPC8260 only) 3099ea909b76Swdenk Offset of the bootmode word in DPRAM used by post 3100ea909b76Swdenk (Power On Self Tests). This definition overrides 3101ea909b76Swdenk #define'd default value in commproc.h resp. 3102ea909b76Swdenk cpm_8260.h. 3103ea909b76Swdenk 31046d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PCI_SLV_MEM_LOCAL, CONFIG_SYS_PCI_SLV_MEM_BUS, CONFIG_SYS_PICMR0_MASK_ATTRIB, 31056d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PCI_MSTR0_LOCAL, CONFIG_SYS_PCIMSK0_MASK, CONFIG_SYS_PCI_MSTR1_LOCAL, 31066d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PCIMSK1_MASK, CONFIG_SYS_PCI_MSTR_MEM_LOCAL, CONFIG_SYS_PCI_MSTR_MEM_BUS, 31076d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_CPU_PCI_MEM_START, CONFIG_SYS_PCI_MSTR_MEM_SIZE, CONFIG_SYS_POCMR0_MASK_ATTRIB, 31086d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL, CONFIG_SYS_PCI_MSTR_MEMIO_BUS, CPU_PCI_MEMIO_START, 31096d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PCI_MSTR_MEMIO_SIZE, CONFIG_SYS_POCMR1_MASK_ATTRIB, CONFIG_SYS_PCI_MSTR_IO_LOCAL, 31106d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_PCI_MSTR_IO_BUS, CONFIG_SYS_CPU_PCI_IO_START, CONFIG_SYS_PCI_MSTR_IO_SIZE, 31116d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_POCMR2_MASK_ATTRIB: (MPC826x only) 3112a47a12beSStefan Roese Overrides the default PCI memory map in arch/powerpc/cpu/mpc8260/pci.c if set. 31135d232d0eSwdenk 31149cacf4fcSDirk Eibach- CONFIG_PCI_DISABLE_PCIE: 31159cacf4fcSDirk Eibach Disable PCI-Express on systems where it is supported but not 31169cacf4fcSDirk Eibach required. 31179cacf4fcSDirk Eibach 3118a09b9b68SKumar Gala- CONFIG_SYS_SRIO: 3119a09b9b68SKumar Gala Chip has SRIO or not 3120a09b9b68SKumar Gala 3121a09b9b68SKumar Gala- CONFIG_SRIO1: 3122a09b9b68SKumar Gala Board has SRIO 1 port available 3123a09b9b68SKumar Gala 3124a09b9b68SKumar Gala- CONFIG_SRIO2: 3125a09b9b68SKumar Gala Board has SRIO 2 port available 3126a09b9b68SKumar Gala 3127a09b9b68SKumar Gala- CONFIG_SYS_SRIOn_MEM_VIRT: 3128a09b9b68SKumar Gala Virtual Address of SRIO port 'n' memory region 3129a09b9b68SKumar Gala 3130a09b9b68SKumar Gala- CONFIG_SYS_SRIOn_MEM_PHYS: 3131a09b9b68SKumar Gala Physical Address of SRIO port 'n' memory region 3132a09b9b68SKumar Gala 3133a09b9b68SKumar Gala- CONFIG_SYS_SRIOn_MEM_SIZE: 3134a09b9b68SKumar Gala Size of SRIO port 'n' memory region 3135a09b9b68SKumar Gala 3136eced4626SAlex Waterman- CONFIG_SYS_NDFC_16 3137eced4626SAlex Waterman Defined to tell the NDFC that the NAND chip is using a 3138eced4626SAlex Waterman 16 bit bus. 3139eced4626SAlex Waterman 3140eced4626SAlex Waterman- CONFIG_SYS_NDFC_EBC0_CFG 3141eced4626SAlex Waterman Sets the EBC0_CFG register for the NDFC. If not defined 3142eced4626SAlex Waterman a default value will be used. 3143eced4626SAlex Waterman 3144bb99ad6dSBen Warren- CONFIG_SPD_EEPROM 3145218ca724SWolfgang Denk Get DDR timing information from an I2C EEPROM. Common 3146218ca724SWolfgang Denk with pluggable memory modules such as SODIMMs 3147218ca724SWolfgang Denk 3148bb99ad6dSBen Warren SPD_EEPROM_ADDRESS 3149bb99ad6dSBen Warren I2C address of the SPD EEPROM 3150bb99ad6dSBen Warren 31516d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SPD_BUS_NUM 3152218ca724SWolfgang Denk If SPD EEPROM is on an I2C bus other than the first 3153218ca724SWolfgang Denk one, specify here. Note that the value must resolve 3154218ca724SWolfgang Denk to something your driver can deal with. 3155bb99ad6dSBen Warren 31561b3e3c4fSYork Sun- CONFIG_SYS_DDR_RAW_TIMING 31571b3e3c4fSYork Sun Get DDR timing information from other than SPD. Common with 31581b3e3c4fSYork Sun soldered DDR chips onboard without SPD. DDR raw timing 31591b3e3c4fSYork Sun parameters are extracted from datasheet and hard-coded into 31601b3e3c4fSYork Sun header files or board specific files. 31611b3e3c4fSYork Sun 31626f5e1dc5SYork Sun- CONFIG_FSL_DDR_INTERACTIVE 31636f5e1dc5SYork Sun Enable interactive DDR debugging. See doc/README.fsl-ddr. 31646f5e1dc5SYork Sun 31656d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_83XX_DDR_USES_CS0 3166218ca724SWolfgang Denk Only for 83xx systems. If specified, then DDR should 3167218ca724SWolfgang Denk be configured using CS0 and CS1 instead of CS2 and CS3. 31682ad6b513STimur Tabi 3169c26e454dSwdenk- CONFIG_ETHER_ON_FEC[12] 3170c26e454dSwdenk Define to enable FEC[12] on a 8xx series processor. 3171c26e454dSwdenk 3172c26e454dSwdenk- CONFIG_FEC[12]_PHY 3173c26e454dSwdenk Define to the hardcoded PHY address which corresponds 31746e592385Swdenk to the given FEC; i. e. 3175c26e454dSwdenk #define CONFIG_FEC1_PHY 4 3176c26e454dSwdenk means that the PHY with address 4 is connected to FEC1 3177c26e454dSwdenk 3178c26e454dSwdenk When set to -1, means to probe for first available. 3179c26e454dSwdenk 3180c26e454dSwdenk- CONFIG_FEC[12]_PHY_NORXERR 3181c26e454dSwdenk The PHY does not have a RXERR line (RMII only). 3182c26e454dSwdenk (so program the FEC to ignore it). 3183c26e454dSwdenk 3184c26e454dSwdenk- CONFIG_RMII 3185c26e454dSwdenk Enable RMII mode for all FECs. 3186c26e454dSwdenk Note that this is a global option, we can't 3187c26e454dSwdenk have one FEC in standard MII mode and another in RMII mode. 3188c26e454dSwdenk 31895cf91d6bSwdenk- CONFIG_CRC32_VERIFY 31905cf91d6bSwdenk Add a verify option to the crc32 command. 31915cf91d6bSwdenk The syntax is: 31925cf91d6bSwdenk 31935cf91d6bSwdenk => crc32 -v <address> <count> <crc32> 31945cf91d6bSwdenk 31955cf91d6bSwdenk Where address/count indicate a memory area 31965cf91d6bSwdenk and crc32 is the correct crc32 which the 31975cf91d6bSwdenk area should have. 31985cf91d6bSwdenk 319956523f12Swdenk- CONFIG_LOOPW 320056523f12Swdenk Add the "loopw" memory command. This only takes effect if 3201602ad3b3SJon Loeliger the memory commands are activated globally (CONFIG_CMD_MEM). 320256523f12Swdenk 32037b466641Sstroese- CONFIG_MX_CYCLIC 32047b466641Sstroese Add the "mdc" and "mwc" memory commands. These are cyclic 32057b466641Sstroese "md/mw" commands. 32067b466641Sstroese Examples: 32077b466641Sstroese 32087b466641Sstroese => mdc.b 10 4 500 32097b466641Sstroese This command will print 4 bytes (10,11,12,13) each 500 ms. 32107b466641Sstroese 32117b466641Sstroese => mwc.l 100 12345678 10 32127b466641Sstroese This command will write 12345678 to address 100 all 10 ms. 32137b466641Sstroese 32147b466641Sstroese This only takes effect if the memory commands are activated 3215602ad3b3SJon Loeliger globally (CONFIG_CMD_MEM). 32167b466641Sstroese 32178aa1a2d1Swdenk- CONFIG_SKIP_LOWLEVEL_INIT 3218afc1ce82SMacpaul Lin [ARM, NDS32, MIPS only] If this variable is defined, then certain 3219e03f3169SWolfgang Denk low level initializations (like setting up the memory 3220e03f3169SWolfgang Denk controller) are omitted and/or U-Boot does not 3221e03f3169SWolfgang Denk relocate itself into RAM. 32228aa1a2d1Swdenk 3223e03f3169SWolfgang Denk Normally this variable MUST NOT be defined. The only 3224e03f3169SWolfgang Denk exception is when U-Boot is loaded (to RAM) by some 3225e03f3169SWolfgang Denk other boot loader or by a debugger which performs 3226e03f3169SWolfgang Denk these initializations itself. 32278aa1a2d1Swdenk 3228401bb30bSAneesh V- CONFIG_SPL_BUILD 3229df81238bSMagnus Lilja Modifies the behaviour of start.S when compiling a loader 3230df81238bSMagnus Lilja that is executed before the actual U-Boot. E.g. when 3231df81238bSMagnus Lilja compiling a NAND SPL. 3232400558b5Swdenk 3233d8834a13SMatthias Weisser- CONFIG_USE_ARCH_MEMCPY 3234d8834a13SMatthias Weisser CONFIG_USE_ARCH_MEMSET 3235d8834a13SMatthias Weisser If these options are used a optimized version of memcpy/memset will 3236d8834a13SMatthias Weisser be used if available. These functions may be faster under some 3237d8834a13SMatthias Weisser conditions but may increase the binary size. 3238d8834a13SMatthias Weisser 3239c609719bSwdenkBuilding the Software: 3240c609719bSwdenk====================== 3241c609719bSwdenk 3242218ca724SWolfgang DenkBuilding U-Boot has been tested in several native build environments 3243218ca724SWolfgang Denkand in many different cross environments. Of course we cannot support 3244218ca724SWolfgang Denkall possibly existing versions of cross development tools in all 3245218ca724SWolfgang Denk(potentially obsolete) versions. In case of tool chain problems we 3246218ca724SWolfgang Denkrecommend to use the ELDK (see http://www.denx.de/wiki/DULG/ELDK) 3247218ca724SWolfgang Denkwhich is extensively used to build and test U-Boot. 3248c609719bSwdenk 3249218ca724SWolfgang DenkIf you are not using a native environment, it is assumed that you 3250218ca724SWolfgang Denkhave GNU cross compiling tools available in your path. In this case, 3251218ca724SWolfgang Denkyou must set the environment variable CROSS_COMPILE in your shell. 3252218ca724SWolfgang DenkNote that no changes to the Makefile or any other source files are 3253218ca724SWolfgang Denknecessary. For example using the ELDK on a 4xx CPU, please enter: 3254c609719bSwdenk 3255218ca724SWolfgang Denk $ CROSS_COMPILE=ppc_4xx- 3256218ca724SWolfgang Denk $ export CROSS_COMPILE 3257c609719bSwdenk 32582f8d396bSPeter TyserNote: If you wish to generate Windows versions of the utilities in 32592f8d396bSPeter Tyser the tools directory you can use the MinGW toolchain 32602f8d396bSPeter Tyser (http://www.mingw.org). Set your HOST tools to the MinGW 32612f8d396bSPeter Tyser toolchain and execute 'make tools'. For example: 32622f8d396bSPeter Tyser 32632f8d396bSPeter Tyser $ make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools 32642f8d396bSPeter Tyser 32652f8d396bSPeter Tyser Binaries such as tools/mkimage.exe will be created which can 32662f8d396bSPeter Tyser be executed on computers running Windows. 32672f8d396bSPeter Tyser 3268c609719bSwdenkU-Boot is intended to be simple to build. After installing the 3269c609719bSwdenksources you must configure U-Boot for one specific board type. This 3270c609719bSwdenkis done by typing: 3271c609719bSwdenk 3272c609719bSwdenk make NAME_config 3273c609719bSwdenk 3274218ca724SWolfgang Denkwhere "NAME_config" is the name of one of the existing configu- 3275218ca724SWolfgang Denkrations; see the main Makefile for supported names. 327654387ac9Swdenk 3277c609719bSwdenkNote: for some board special configuration names may exist; check if 3278c609719bSwdenk additional information is available from the board vendor; for 32792729af9dSwdenk instance, the TQM823L systems are available without (standard) 32802729af9dSwdenk or with LCD support. You can select such additional "features" 328111ccc33fSMarcel Ziswiler when choosing the configuration, i. e. 3282c609719bSwdenk 32832729af9dSwdenk make TQM823L_config 32842729af9dSwdenk - will configure for a plain TQM823L, i. e. no LCD support 3285c609719bSwdenk 3286c609719bSwdenk make TQM823L_LCD_config 3287c609719bSwdenk - will configure for a TQM823L with U-Boot console on LCD 3288c609719bSwdenk 3289c609719bSwdenk etc. 3290c609719bSwdenk 3291c609719bSwdenk 3292c609719bSwdenkFinally, type "make all", and you should get some working U-Boot 32937152b1d0Swdenkimages ready for download to / installation on your system: 3294c609719bSwdenk 3295c609719bSwdenk- "u-boot.bin" is a raw binary image 3296c609719bSwdenk- "u-boot" is an image in ELF binary format 3297c609719bSwdenk- "u-boot.srec" is in Motorola S-Record format 3298c609719bSwdenk 3299baf31249SMarian BalakowiczBy default the build is performed locally and the objects are saved 3300baf31249SMarian Balakowiczin the source directory. One of the two methods can be used to change 3301baf31249SMarian Balakowiczthis behavior and build U-Boot to some external directory: 3302baf31249SMarian Balakowicz 3303baf31249SMarian Balakowicz1. Add O= to the make command line invocations: 3304baf31249SMarian Balakowicz 3305baf31249SMarian Balakowicz make O=/tmp/build distclean 3306baf31249SMarian Balakowicz make O=/tmp/build NAME_config 3307baf31249SMarian Balakowicz make O=/tmp/build all 3308baf31249SMarian Balakowicz 3309baf31249SMarian Balakowicz2. Set environment variable BUILD_DIR to point to the desired location: 3310baf31249SMarian Balakowicz 3311baf31249SMarian Balakowicz export BUILD_DIR=/tmp/build 3312baf31249SMarian Balakowicz make distclean 3313baf31249SMarian Balakowicz make NAME_config 3314baf31249SMarian Balakowicz make all 3315baf31249SMarian Balakowicz 3316baf31249SMarian BalakowiczNote that the command line "O=" setting overrides the BUILD_DIR environment 3317baf31249SMarian Balakowiczvariable. 3318baf31249SMarian Balakowicz 3319c609719bSwdenk 3320c609719bSwdenkPlease be aware that the Makefiles assume you are using GNU make, so 3321c609719bSwdenkfor instance on NetBSD you might need to use "gmake" instead of 3322c609719bSwdenknative "make". 3323c609719bSwdenk 3324c609719bSwdenk 3325c609719bSwdenkIf the system board that you have is not listed, then you will need 3326c609719bSwdenkto port U-Boot to your hardware platform. To do this, follow these 3327c609719bSwdenksteps: 3328c609719bSwdenk 3329c609719bSwdenk1. Add a new configuration option for your board to the toplevel 333085ec0bccSwdenk "Makefile" and to the "MAKEALL" script, using the existing 333185ec0bccSwdenk entries as examples. Note that here and at many other places 33327152b1d0Swdenk boards and other names are listed in alphabetical sort order. Please 333385ec0bccSwdenk keep this order. 3334c609719bSwdenk2. Create a new directory to hold your board specific code. Add any 333585ec0bccSwdenk files you need. In your board directory, you will need at least 333685ec0bccSwdenk the "Makefile", a "<board>.c", "flash.c" and "u-boot.lds". 333785ec0bccSwdenk3. Create a new configuration file "include/configs/<board>.h" for 333885ec0bccSwdenk your board 3339c609719bSwdenk3. If you're porting U-Boot to a new CPU, then also create a new 3340c609719bSwdenk directory to hold your CPU specific code. Add any files you need. 334185ec0bccSwdenk4. Run "make <board>_config" with your new name. 3342c609719bSwdenk5. Type "make", and you should get a working "u-boot.srec" file 3343c609719bSwdenk to be installed on your target system. 334485ec0bccSwdenk6. Debug and solve any problems that might arise. 3345c609719bSwdenk [Of course, this last step is much harder than it sounds.] 3346c609719bSwdenk 3347c609719bSwdenk 3348c609719bSwdenkTesting of U-Boot Modifications, Ports to New Hardware, etc.: 3349c609719bSwdenk============================================================== 3350c609719bSwdenk 3351c609719bSwdenkIf you have modified U-Boot sources (for instance added a new board 3352c609719bSwdenkor support for new devices, a new CPU, etc.) you are expected to 3353c609719bSwdenkprovide feedback to the other developers. The feedback normally takes 3354c609719bSwdenkthe form of a "patch", i. e. a context diff against a certain (latest 3355218ca724SWolfgang Denkofficial or latest in the git repository) version of U-Boot sources. 3356c609719bSwdenk 3357c609719bSwdenkBut before you submit such a patch, please verify that your modifi- 3358c609719bSwdenkcation did not break existing code. At least make sure that *ALL* of 3359c609719bSwdenkthe supported boards compile WITHOUT ANY compiler warnings. To do so, 3360c609719bSwdenkjust run the "MAKEALL" script, which will configure and build U-Boot 3361c609719bSwdenkfor ALL supported system. Be warned, this will take a while. You can 33627152b1d0Swdenkselect which (cross) compiler to use by passing a `CROSS_COMPILE' 3363218ca724SWolfgang Denkenvironment variable to the script, i. e. to use the ELDK cross tools 3364218ca724SWolfgang Denkyou can type 3365c609719bSwdenk 3366c609719bSwdenk CROSS_COMPILE=ppc_8xx- MAKEALL 3367c609719bSwdenk 3368c609719bSwdenkor to build on a native PowerPC system you can type 3369c609719bSwdenk 3370c609719bSwdenk CROSS_COMPILE=' ' MAKEALL 3371c609719bSwdenk 3372218ca724SWolfgang DenkWhen using the MAKEALL script, the default behaviour is to build 3373218ca724SWolfgang DenkU-Boot in the source directory. This location can be changed by 3374218ca724SWolfgang Denksetting the BUILD_DIR environment variable. Also, for each target 3375218ca724SWolfgang Denkbuilt, the MAKEALL script saves two log files (<target>.ERR and 3376218ca724SWolfgang Denk<target>.MAKEALL) in the <source dir>/LOG directory. This default 3377218ca724SWolfgang Denklocation can be changed by setting the MAKEALL_LOGDIR environment 3378218ca724SWolfgang Denkvariable. For example: 3379baf31249SMarian Balakowicz 3380baf31249SMarian Balakowicz export BUILD_DIR=/tmp/build 3381baf31249SMarian Balakowicz export MAKEALL_LOGDIR=/tmp/log 3382baf31249SMarian Balakowicz CROSS_COMPILE=ppc_8xx- MAKEALL 3383baf31249SMarian Balakowicz 3384218ca724SWolfgang DenkWith the above settings build objects are saved in the /tmp/build, 3385218ca724SWolfgang Denklog files are saved in the /tmp/log and the source tree remains clean 3386218ca724SWolfgang Denkduring the whole build process. 3387baf31249SMarian Balakowicz 3388baf31249SMarian Balakowicz 3389c609719bSwdenkSee also "U-Boot Porting Guide" below. 3390c609719bSwdenk 3391c609719bSwdenk 3392c609719bSwdenkMonitor Commands - Overview: 3393c609719bSwdenk============================ 3394c609719bSwdenk 3395c609719bSwdenkgo - start application at address 'addr' 3396c609719bSwdenkrun - run commands in an environment variable 3397c609719bSwdenkbootm - boot application image from memory 3398c609719bSwdenkbootp - boot image via network using BootP/TFTP protocol 3399c609719bSwdenktftpboot- boot image via network using TFTP protocol 3400c609719bSwdenk and env variables "ipaddr" and "serverip" 3401c609719bSwdenk (and eventually "gatewayip") 34021fb7cd49SSimon Glasstftpput - upload a file via network using TFTP protocol 3403c609719bSwdenkrarpboot- boot image via network using RARP/TFTP protocol 3404c609719bSwdenkdiskboot- boot from IDE devicebootd - boot default, i.e., run 'bootcmd' 3405c609719bSwdenkloads - load S-Record file over serial line 3406c609719bSwdenkloadb - load binary file over serial line (kermit mode) 3407c609719bSwdenkmd - memory display 3408c609719bSwdenkmm - memory modify (auto-incrementing) 3409c609719bSwdenknm - memory modify (constant address) 3410c609719bSwdenkmw - memory write (fill) 3411c609719bSwdenkcp - memory copy 3412c609719bSwdenkcmp - memory compare 3413c609719bSwdenkcrc32 - checksum calculation 34140f89c54bSPeter Tyseri2c - I2C sub-system 3415c609719bSwdenksspi - SPI utility commands 3416c609719bSwdenkbase - print or set address offset 3417c609719bSwdenkprintenv- print environment variables 3418c609719bSwdenksetenv - set environment variables 3419c609719bSwdenksaveenv - save environment variables to persistent storage 3420c609719bSwdenkprotect - enable or disable FLASH write protection 3421c609719bSwdenkerase - erase FLASH memory 3422c609719bSwdenkflinfo - print FLASH memory information 3423c609719bSwdenkbdinfo - print Board Info structure 3424c609719bSwdenkiminfo - print header information for application image 3425c609719bSwdenkconinfo - print console devices and informations 3426c609719bSwdenkide - IDE sub-system 3427c609719bSwdenkloop - infinite loop on address range 342856523f12Swdenkloopw - infinite write loop on address range 3429c609719bSwdenkmtest - simple RAM test 3430c609719bSwdenkicache - enable or disable instruction cache 3431c609719bSwdenkdcache - enable or disable data cache 3432c609719bSwdenkreset - Perform RESET of the CPU 3433c609719bSwdenkecho - echo args to console 3434c609719bSwdenkversion - print monitor version 3435c609719bSwdenkhelp - print online help 3436c609719bSwdenk? - alias for 'help' 3437c609719bSwdenk 3438c609719bSwdenk 3439c609719bSwdenkMonitor Commands - Detailed Description: 3440c609719bSwdenk======================================== 3441c609719bSwdenk 3442c609719bSwdenkTODO. 3443c609719bSwdenk 3444c609719bSwdenkFor now: just type "help <command>". 3445c609719bSwdenk 3446c609719bSwdenk 3447c609719bSwdenkEnvironment Variables: 3448c609719bSwdenk====================== 3449c609719bSwdenk 3450c609719bSwdenkU-Boot supports user configuration using Environment Variables which 3451c609719bSwdenkcan be made persistent by saving to Flash memory. 3452c609719bSwdenk 3453c609719bSwdenkEnvironment Variables are set using "setenv", printed using 3454c609719bSwdenk"printenv", and saved to Flash using "saveenv". Using "setenv" 3455c609719bSwdenkwithout a value can be used to delete a variable from the 3456c609719bSwdenkenvironment. As long as you don't save the environment you are 3457c609719bSwdenkworking with an in-memory copy. In case the Flash area containing the 3458c609719bSwdenkenvironment is erased by accident, a default environment is provided. 3459c609719bSwdenk 3460c96f86eeSWolfgang DenkSome configuration options can be set using Environment Variables. 3461c96f86eeSWolfgang Denk 3462c96f86eeSWolfgang DenkList of environment variables (most likely not complete): 3463c609719bSwdenk 3464c609719bSwdenk baudrate - see CONFIG_BAUDRATE 3465c609719bSwdenk 3466c609719bSwdenk bootdelay - see CONFIG_BOOTDELAY 3467c609719bSwdenk 3468c609719bSwdenk bootcmd - see CONFIG_BOOTCOMMAND 3469c609719bSwdenk 3470c609719bSwdenk bootargs - Boot arguments when booting an RTOS image 3471c609719bSwdenk 3472c609719bSwdenk bootfile - Name of the image to load with TFTP 3473c609719bSwdenk 34747d721e34SBartlomiej Sieka bootm_low - Memory range available for image processing in the bootm 34757d721e34SBartlomiej Sieka command can be restricted. This variable is given as 34767d721e34SBartlomiej Sieka a hexadecimal number and defines lowest address allowed 34777d721e34SBartlomiej Sieka for use by the bootm command. See also "bootm_size" 34787d721e34SBartlomiej Sieka environment variable. Address defined by "bootm_low" is 34797d721e34SBartlomiej Sieka also the base of the initial memory mapping for the Linux 3480c3624e6eSGrant Likely kernel -- see the description of CONFIG_SYS_BOOTMAPSZ and 3481c3624e6eSGrant Likely bootm_mapsize. 3482c3624e6eSGrant Likely 3483c3624e6eSGrant Likely bootm_mapsize - Size of the initial memory mapping for the Linux kernel. 3484c3624e6eSGrant Likely This variable is given as a hexadecimal number and it 3485c3624e6eSGrant Likely defines the size of the memory region starting at base 3486c3624e6eSGrant Likely address bootm_low that is accessible by the Linux kernel 3487c3624e6eSGrant Likely during early boot. If unset, CONFIG_SYS_BOOTMAPSZ is used 3488c3624e6eSGrant Likely as the default value if it is defined, and bootm_size is 3489c3624e6eSGrant Likely used otherwise. 34907d721e34SBartlomiej Sieka 34917d721e34SBartlomiej Sieka bootm_size - Memory range available for image processing in the bootm 34927d721e34SBartlomiej Sieka command can be restricted. This variable is given as 34937d721e34SBartlomiej Sieka a hexadecimal number and defines the size of the region 34947d721e34SBartlomiej Sieka allowed for use by the bootm command. See also "bootm_low" 34957d721e34SBartlomiej Sieka environment variable. 34967d721e34SBartlomiej Sieka 34974bae9090SBartlomiej Sieka updatefile - Location of the software update file on a TFTP server, used 34984bae9090SBartlomiej Sieka by the automatic software update feature. Please refer to 34994bae9090SBartlomiej Sieka documentation in doc/README.update for more details. 35004bae9090SBartlomiej Sieka 3501c609719bSwdenk autoload - if set to "no" (any string beginning with 'n'), 3502c609719bSwdenk "bootp" will just load perform a lookup of the 3503c609719bSwdenk configuration from the BOOTP server, but not try to 3504c609719bSwdenk load any image using TFTP 3505c609719bSwdenk 3506c609719bSwdenk autostart - if set to "yes", an image loaded using the "bootp", 3507c609719bSwdenk "rarpboot", "tftpboot" or "diskboot" commands will 3508c609719bSwdenk be automatically started (by internally calling 3509c609719bSwdenk "bootm") 3510c609719bSwdenk 35114a6fd34bSwdenk If set to "no", a standalone image passed to the 35124a6fd34bSwdenk "bootm" command will be copied to the load address 35134a6fd34bSwdenk (and eventually uncompressed), but NOT be started. 35144a6fd34bSwdenk This can be used to load and uncompress arbitrary 35154a6fd34bSwdenk data. 35164a6fd34bSwdenk 3517a28afca5SDavid A. Long fdt_high - if set this restricts the maximum address that the 3518a28afca5SDavid A. Long flattened device tree will be copied into upon boot. 3519a28afca5SDavid A. Long If this is set to the special value 0xFFFFFFFF then 3520a28afca5SDavid A. Long the fdt will not be copied at all on boot. For this 3521a28afca5SDavid A. Long to work it must reside in writable memory, have 3522a28afca5SDavid A. Long sufficient padding on the end of it for u-boot to 3523a28afca5SDavid A. Long add the information it needs into it, and the memory 3524a28afca5SDavid A. Long must be accessible by the kernel. 3525a28afca5SDavid A. Long 3526eea63e05SSimon Glass fdtcontroladdr- if set this is the address of the control flattened 3527eea63e05SSimon Glass device tree used by U-Boot when CONFIG_OF_CONTROL is 3528eea63e05SSimon Glass defined. 3529eea63e05SSimon Glass 353017ea1177Swdenk i2cfast - (PPC405GP|PPC405EP only) 353117ea1177Swdenk if set to 'y' configures Linux I2C driver for fast 353217ea1177Swdenk mode (400kHZ). This environment variable is used in 353317ea1177Swdenk initialization code. So, for changes to be effective 353417ea1177Swdenk it must be saved and board must be reset. 353517ea1177Swdenk 3536c609719bSwdenk initrd_high - restrict positioning of initrd images: 3537c609719bSwdenk If this variable is not set, initrd images will be 3538c609719bSwdenk copied to the highest possible address in RAM; this 3539c609719bSwdenk is usually what you want since it allows for 3540c609719bSwdenk maximum initrd size. If for some reason you want to 3541c609719bSwdenk make sure that the initrd image is loaded below the 35426d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_BOOTMAPSZ limit, you can set this environment 3543c609719bSwdenk variable to a value of "no" or "off" or "0". 3544c609719bSwdenk Alternatively, you can set it to a maximum upper 3545c609719bSwdenk address to use (U-Boot will still check that it 3546c609719bSwdenk does not overwrite the U-Boot stack and data). 3547c609719bSwdenk 3548c609719bSwdenk For instance, when you have a system with 16 MB 35497152b1d0Swdenk RAM, and want to reserve 4 MB from use by Linux, 3550c609719bSwdenk you can do this by adding "mem=12M" to the value of 3551c609719bSwdenk the "bootargs" variable. However, now you must make 35527152b1d0Swdenk sure that the initrd image is placed in the first 3553c609719bSwdenk 12 MB as well - this can be done with 3554c609719bSwdenk 3555c609719bSwdenk setenv initrd_high 00c00000 3556c609719bSwdenk 355738b99261Swdenk If you set initrd_high to 0xFFFFFFFF, this is an 355838b99261Swdenk indication to U-Boot that all addresses are legal 355938b99261Swdenk for the Linux kernel, including addresses in flash 356038b99261Swdenk memory. In this case U-Boot will NOT COPY the 356138b99261Swdenk ramdisk at all. This may be useful to reduce the 356238b99261Swdenk boot time on your system, but requires that this 356338b99261Swdenk feature is supported by your Linux kernel. 356438b99261Swdenk 3565c609719bSwdenk ipaddr - IP address; needed for tftpboot command 3566c609719bSwdenk 3567c609719bSwdenk loadaddr - Default load address for commands like "bootp", 3568dc7c9a1aSwdenk "rarpboot", "tftpboot", "loadb" or "diskboot" 3569c609719bSwdenk 3570c609719bSwdenk loads_echo - see CONFIG_LOADS_ECHO 3571c609719bSwdenk 3572c609719bSwdenk serverip - TFTP server IP address; needed for tftpboot command 3573c609719bSwdenk 3574c609719bSwdenk bootretry - see CONFIG_BOOT_RETRY_TIME 3575c609719bSwdenk 3576c609719bSwdenk bootdelaykey - see CONFIG_AUTOBOOT_DELAY_STR 3577c609719bSwdenk 3578c609719bSwdenk bootstopkey - see CONFIG_AUTOBOOT_STOP_STR 3579c609719bSwdenk 3580e2a53458SMike Frysinger ethprime - controls which interface is used first. 3581a3d991bdSwdenk 3582e2a53458SMike Frysinger ethact - controls which interface is currently active. 3583e2a53458SMike Frysinger For example you can do the following 3584a3d991bdSwdenk 358548690d80SHeiko Schocher => setenv ethact FEC 358648690d80SHeiko Schocher => ping 192.168.0.1 # traffic sent on FEC 358748690d80SHeiko Schocher => setenv ethact SCC 358848690d80SHeiko Schocher => ping 10.0.0.1 # traffic sent on SCC 3589a3d991bdSwdenk 3590e1692577SMatthias Fuchs ethrotate - When set to "no" U-Boot does not go through all 3591e1692577SMatthias Fuchs available network interfaces. 3592e1692577SMatthias Fuchs It just stays at the currently selected interface. 3593e1692577SMatthias Fuchs 3594a3d991bdSwdenk netretry - When set to "no" each network operation will 3595a3d991bdSwdenk either succeed or fail without retrying. 35966e592385Swdenk When set to "once" the network operation will 35976e592385Swdenk fail when all the available network interfaces 35986e592385Swdenk are tried once without success. 3599a3d991bdSwdenk Useful on scripts which control the retry operation 3600a3d991bdSwdenk themselves. 3601a3d991bdSwdenk 3602b4e2f89dSJean-Christophe PLAGNIOL-VILLARD npe_ucode - set load address for the NPE microcode 3603a1cf027aSJean-Christophe PLAGNIOL-VILLARD 360428cb9375SWolfgang Denk tftpsrcport - If this is set, the value is used for TFTP's 3605ecb0ccd9SWolfgang Denk UDP source port. 3606ecb0ccd9SWolfgang Denk 360728cb9375SWolfgang Denk tftpdstport - If this is set, the value is used for TFTP's UDP 360828cb9375SWolfgang Denk destination port instead of the Well Know Port 69. 360928cb9375SWolfgang Denk 3610c96f86eeSWolfgang Denk tftpblocksize - Block size to use for TFTP transfers; if not set, 3611c96f86eeSWolfgang Denk we use the TFTP server's default block size 3612c96f86eeSWolfgang Denk 3613c96f86eeSWolfgang Denk tftptimeout - Retransmission timeout for TFTP packets (in milli- 3614c96f86eeSWolfgang Denk seconds, minimum value is 1000 = 1 second). Defines 3615c96f86eeSWolfgang Denk when a packet is considered to be lost so it has to 3616c96f86eeSWolfgang Denk be retransmitted. The default is 5000 = 5 seconds. 3617c96f86eeSWolfgang Denk Lowering this value may make downloads succeed 3618c96f86eeSWolfgang Denk faster in networks with high packet loss rates or 3619c96f86eeSWolfgang Denk with unreliable TFTP servers. 3620c96f86eeSWolfgang Denk 3621a3d991bdSwdenk vlan - When set to a value < 4095 the traffic over 362211ccc33fSMarcel Ziswiler Ethernet is encapsulated/received over 802.1q 3623a3d991bdSwdenk VLAN tagged frames. 3624c609719bSwdenk 3625dc0b7b0eSJason HobbsThe following image location variables contain the location of images 3626dc0b7b0eSJason Hobbsused in booting. The "Image" column gives the role of the image and is 3627dc0b7b0eSJason Hobbsnot an environment variable name. The other columns are environment 3628dc0b7b0eSJason Hobbsvariable names. "File Name" gives the name of the file on a TFTP 3629dc0b7b0eSJason Hobbsserver, "RAM Address" gives the location in RAM the image will be 3630dc0b7b0eSJason Hobbsloaded to, and "Flash Location" gives the image's address in NOR 3631dc0b7b0eSJason Hobbsflash or offset in NAND flash. 3632dc0b7b0eSJason Hobbs 3633dc0b7b0eSJason Hobbs*Note* - these variables don't have to be defined for all boards, some 3634dc0b7b0eSJason Hobbsboards currenlty use other variables for these purposes, and some 3635dc0b7b0eSJason Hobbsboards use these variables for other purposes. 3636dc0b7b0eSJason Hobbs 3637dc0b7b0eSJason HobbsImage File Name RAM Address Flash Location 3638dc0b7b0eSJason Hobbs----- --------- ----------- -------------- 3639dc0b7b0eSJason Hobbsu-boot u-boot u-boot_addr_r u-boot_addr 3640dc0b7b0eSJason HobbsLinux kernel bootfile kernel_addr_r kernel_addr 3641dc0b7b0eSJason Hobbsdevice tree blob fdtfile fdt_addr_r fdt_addr 3642dc0b7b0eSJason Hobbsramdisk ramdiskfile ramdisk_addr_r ramdisk_addr 3643dc0b7b0eSJason Hobbs 3644c609719bSwdenkThe following environment variables may be used and automatically 3645c609719bSwdenkupdated by the network boot commands ("bootp" and "rarpboot"), 3646c609719bSwdenkdepending the information provided by your boot server: 3647c609719bSwdenk 3648c609719bSwdenk bootfile - see above 3649c609719bSwdenk dnsip - IP address of your Domain Name Server 3650fe389a82Sstroese dnsip2 - IP address of your secondary Domain Name Server 3651c609719bSwdenk gatewayip - IP address of the Gateway (Router) to use 3652c609719bSwdenk hostname - Target hostname 3653c609719bSwdenk ipaddr - see above 3654c609719bSwdenk netmask - Subnet Mask 3655c609719bSwdenk rootpath - Pathname of the root filesystem on the NFS server 3656c609719bSwdenk serverip - see above 3657c609719bSwdenk 3658c609719bSwdenk 3659c609719bSwdenkThere are two special Environment Variables: 3660c609719bSwdenk 3661c609719bSwdenk serial# - contains hardware identification information such 3662c609719bSwdenk as type string and/or serial number 3663c609719bSwdenk ethaddr - Ethernet address 3664c609719bSwdenk 3665c609719bSwdenkThese variables can be set only once (usually during manufacturing of 3666c609719bSwdenkthe board). U-Boot refuses to delete or overwrite these variables 3667c609719bSwdenkonce they have been set once. 3668c609719bSwdenk 3669c609719bSwdenk 3670c1551ea8SstroeseFurther special Environment Variables: 3671c1551ea8Sstroese 3672c1551ea8Sstroese ver - Contains the U-Boot version string as printed 3673c1551ea8Sstroese with the "version" command. This variable is 3674c1551ea8Sstroese readonly (see CONFIG_VERSION_VARIABLE). 3675c1551ea8Sstroese 3676c1551ea8Sstroese 3677c609719bSwdenkPlease note that changes to some configuration parameters may take 3678c609719bSwdenkonly effect after the next boot (yes, that's just like Windoze :-). 3679c609719bSwdenk 3680c609719bSwdenk 3681f07771ccSwdenkCommand Line Parsing: 3682f07771ccSwdenk===================== 3683f07771ccSwdenk 3684f07771ccSwdenkThere are two different command line parsers available with U-Boot: 36857152b1d0Swdenkthe old "simple" one, and the much more powerful "hush" shell: 3686f07771ccSwdenk 3687f07771ccSwdenkOld, simple command line parser: 3688f07771ccSwdenk-------------------------------- 3689f07771ccSwdenk 3690f07771ccSwdenk- supports environment variables (through setenv / saveenv commands) 3691f07771ccSwdenk- several commands on one line, separated by ';' 3692fe126d8bSWolfgang Denk- variable substitution using "... ${name} ..." syntax 3693f07771ccSwdenk- special characters ('$', ';') can be escaped by prefixing with '\', 3694f07771ccSwdenk for example: 3695fe126d8bSWolfgang Denk setenv bootcmd bootm \${address} 3696f07771ccSwdenk- You can also escape text by enclosing in single apostrophes, for example: 3697f07771ccSwdenk setenv addip 'setenv bootargs $bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off' 3698f07771ccSwdenk 3699f07771ccSwdenkHush shell: 3700f07771ccSwdenk----------- 3701f07771ccSwdenk 3702f07771ccSwdenk- similar to Bourne shell, with control structures like 3703f07771ccSwdenk if...then...else...fi, for...do...done; while...do...done, 3704f07771ccSwdenk until...do...done, ... 3705f07771ccSwdenk- supports environment ("global") variables (through setenv / saveenv 3706f07771ccSwdenk commands) and local shell variables (through standard shell syntax 3707f07771ccSwdenk "name=value"); only environment variables can be used with "run" 3708f07771ccSwdenk command 3709f07771ccSwdenk 3710f07771ccSwdenkGeneral rules: 3711f07771ccSwdenk-------------- 3712f07771ccSwdenk 3713f07771ccSwdenk(1) If a command line (or an environment variable executed by a "run" 3714f07771ccSwdenk command) contains several commands separated by semicolon, and 3715f07771ccSwdenk one of these commands fails, then the remaining commands will be 3716f07771ccSwdenk executed anyway. 3717f07771ccSwdenk 3718f07771ccSwdenk(2) If you execute several variables with one call to run (i. e. 371911ccc33fSMarcel Ziswiler calling run with a list of variables as arguments), any failing 3720f07771ccSwdenk command will cause "run" to terminate, i. e. the remaining 3721f07771ccSwdenk variables are not executed. 3722f07771ccSwdenk 3723c609719bSwdenkNote for Redundant Ethernet Interfaces: 3724c609719bSwdenk======================================= 3725c609719bSwdenk 372611ccc33fSMarcel ZiswilerSome boards come with redundant Ethernet interfaces; U-Boot supports 3727c609719bSwdenksuch configurations and is capable of automatic selection of a 37287152b1d0Swdenk"working" interface when needed. MAC assignment works as follows: 3729c609719bSwdenk 3730c609719bSwdenkNetwork interfaces are numbered eth0, eth1, eth2, ... Corresponding 3731c609719bSwdenkMAC addresses can be stored in the environment as "ethaddr" (=>eth0), 3732c609719bSwdenk"eth1addr" (=>eth1), "eth2addr", ... 3733c609719bSwdenk 3734c609719bSwdenkIf the network interface stores some valid MAC address (for instance 3735c609719bSwdenkin SROM), this is used as default address if there is NO correspon- 3736c609719bSwdenkding setting in the environment; if the corresponding environment 3737c609719bSwdenkvariable is set, this overrides the settings in the card; that means: 3738c609719bSwdenk 3739c609719bSwdenko If the SROM has a valid MAC address, and there is no address in the 3740c609719bSwdenk environment, the SROM's address is used. 3741c609719bSwdenk 3742c609719bSwdenko If there is no valid address in the SROM, and a definition in the 3743c609719bSwdenk environment exists, then the value from the environment variable is 3744c609719bSwdenk used. 3745c609719bSwdenk 3746c609719bSwdenko If both the SROM and the environment contain a MAC address, and 3747c609719bSwdenk both addresses are the same, this MAC address is used. 3748c609719bSwdenk 3749c609719bSwdenko If both the SROM and the environment contain a MAC address, and the 3750c609719bSwdenk addresses differ, the value from the environment is used and a 3751c609719bSwdenk warning is printed. 3752c609719bSwdenk 3753c609719bSwdenko If neither SROM nor the environment contain a MAC address, an error 3754c609719bSwdenk is raised. 3755c609719bSwdenk 3756ecee9324SBen WarrenIf Ethernet drivers implement the 'write_hwaddr' function, valid MAC addresses 3757ecee9324SBen Warrenwill be programmed into hardware as part of the initialization process. This 3758ecee9324SBen Warrenmay be skipped by setting the appropriate 'ethmacskip' environment variable. 3759ecee9324SBen WarrenThe naming convention is as follows: 3760ecee9324SBen Warren"ethmacskip" (=>eth0), "eth1macskip" (=>eth1) etc. 3761c609719bSwdenk 3762c609719bSwdenkImage Formats: 3763c609719bSwdenk============== 3764c609719bSwdenk 37653310c549SMarian BalakowiczU-Boot is capable of booting (and performing other auxiliary operations on) 37663310c549SMarian Balakowiczimages in two formats: 37673310c549SMarian Balakowicz 37683310c549SMarian BalakowiczNew uImage format (FIT) 37693310c549SMarian Balakowicz----------------------- 37703310c549SMarian Balakowicz 37713310c549SMarian BalakowiczFlexible and powerful format based on Flattened Image Tree -- FIT (similar 37723310c549SMarian Balakowiczto Flattened Device Tree). It allows the use of images with multiple 37733310c549SMarian Balakowiczcomponents (several kernels, ramdisks, etc.), with contents protected by 37743310c549SMarian BalakowiczSHA1, MD5 or CRC32. More details are found in the doc/uImage.FIT directory. 37753310c549SMarian Balakowicz 37763310c549SMarian Balakowicz 37773310c549SMarian BalakowiczOld uImage format 37783310c549SMarian Balakowicz----------------- 37793310c549SMarian Balakowicz 37803310c549SMarian BalakowiczOld image format is based on binary files which can be basically anything, 37813310c549SMarian Balakowiczpreceded by a special header; see the definitions in include/image.h for 37823310c549SMarian Balakowiczdetails; basically, the header defines the following image properties: 3783c609719bSwdenk 3784c609719bSwdenk* Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD, 3785c609719bSwdenk 4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks, 3786f5ed9e39SPeter Tyser LynxOS, pSOS, QNX, RTEMS, INTEGRITY; 3787f5ed9e39SPeter Tyser Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS, 3788f5ed9e39SPeter Tyser INTEGRITY). 37897b64fef3SWolfgang Denk* Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86, 3790afc1ce82SMacpaul Lin IA64, MIPS, NDS32, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit; 3791afc1ce82SMacpaul Lin Currently supported: ARM, AVR32, Intel x86, MIPS, NDS32, Nios II, PowerPC). 3792c29fdfc1Swdenk* Compression Type (uncompressed, gzip, bzip2) 3793c609719bSwdenk* Load Address 3794c609719bSwdenk* Entry Point 3795c609719bSwdenk* Image Name 3796c609719bSwdenk* Image Timestamp 3797c609719bSwdenk 3798c609719bSwdenkThe header is marked by a special Magic Number, and both the header 3799c609719bSwdenkand the data portions of the image are secured against corruption by 3800c609719bSwdenkCRC32 checksums. 3801c609719bSwdenk 3802c609719bSwdenk 3803c609719bSwdenkLinux Support: 3804c609719bSwdenk============== 3805c609719bSwdenk 3806c609719bSwdenkAlthough U-Boot should support any OS or standalone application 38077152b1d0Swdenkeasily, the main focus has always been on Linux during the design of 3808c609719bSwdenkU-Boot. 3809c609719bSwdenk 3810c609719bSwdenkU-Boot includes many features that so far have been part of some 3811c609719bSwdenkspecial "boot loader" code within the Linux kernel. Also, any 3812c609719bSwdenk"initrd" images to be used are no longer part of one big Linux image; 3813c609719bSwdenkinstead, kernel and "initrd" are separate images. This implementation 38147152b1d0Swdenkserves several purposes: 3815c609719bSwdenk 3816c609719bSwdenk- the same features can be used for other OS or standalone 3817c609719bSwdenk applications (for instance: using compressed images to reduce the 3818c609719bSwdenk Flash memory footprint) 3819c609719bSwdenk 3820c609719bSwdenk- it becomes much easier to port new Linux kernel versions because 38217152b1d0Swdenk lots of low-level, hardware dependent stuff are done by U-Boot 3822c609719bSwdenk 3823c609719bSwdenk- the same Linux kernel image can now be used with different "initrd" 3824c609719bSwdenk images; of course this also means that different kernel images can 3825c609719bSwdenk be run with the same "initrd". This makes testing easier (you don't 3826c609719bSwdenk have to build a new "zImage.initrd" Linux image when you just 3827c609719bSwdenk change a file in your "initrd"). Also, a field-upgrade of the 3828c609719bSwdenk software is easier now. 3829c609719bSwdenk 3830c609719bSwdenk 3831c609719bSwdenkLinux HOWTO: 3832c609719bSwdenk============ 3833c609719bSwdenk 3834c609719bSwdenkPorting Linux to U-Boot based systems: 3835c609719bSwdenk--------------------------------------- 3836c609719bSwdenk 3837c609719bSwdenkU-Boot cannot save you from doing all the necessary modifications to 3838c609719bSwdenkconfigure the Linux device drivers for use with your target hardware 3839c609719bSwdenk(no, we don't intend to provide a full virtual machine interface to 3840c609719bSwdenkLinux :-). 3841c609719bSwdenk 3842a47a12beSStefan RoeseBut now you can ignore ALL boot loader code (in arch/powerpc/mbxboot). 3843c609719bSwdenk 3844c609719bSwdenkJust make sure your machine specific header file (for instance 3845c609719bSwdenkinclude/asm-ppc/tqm8xx.h) includes the same definition of the Board 38461dc30693SMarkus HeidelbergInformation structure as we define in include/asm-<arch>/u-boot.h, 38471dc30693SMarkus Heidelbergand make sure that your definition of IMAP_ADDR uses the same value 38486d0f6bcfSJean-Christophe PLAGNIOL-VILLARDas your U-Boot configuration in CONFIG_SYS_IMMR. 3849c609719bSwdenk 3850c609719bSwdenk 3851c609719bSwdenkConfiguring the Linux kernel: 3852c609719bSwdenk----------------------------- 3853c609719bSwdenk 3854c609719bSwdenkNo specific requirements for U-Boot. Make sure you have some root 3855c609719bSwdenkdevice (initial ramdisk, NFS) for your target system. 3856c609719bSwdenk 3857c609719bSwdenk 3858c609719bSwdenkBuilding a Linux Image: 3859c609719bSwdenk----------------------- 3860c609719bSwdenk 386124ee89b9SwdenkWith U-Boot, "normal" build targets like "zImage" or "bzImage" are 386224ee89b9Swdenknot used. If you use recent kernel source, a new build target 386324ee89b9Swdenk"uImage" will exist which automatically builds an image usable by 386424ee89b9SwdenkU-Boot. Most older kernels also have support for a "pImage" target, 386524ee89b9Swdenkwhich was introduced for our predecessor project PPCBoot and uses a 386624ee89b9Swdenk100% compatible format. 3867c609719bSwdenk 3868c609719bSwdenkExample: 3869c609719bSwdenk 3870c609719bSwdenk make TQM850L_config 3871c609719bSwdenk make oldconfig 3872c609719bSwdenk make dep 387324ee89b9Swdenk make uImage 3874c609719bSwdenk 387524ee89b9SwdenkThe "uImage" build target uses a special tool (in 'tools/mkimage') to 387624ee89b9Swdenkencapsulate a compressed Linux kernel image with header information, 387724ee89b9SwdenkCRC32 checksum etc. for use with U-Boot. This is what we are doing: 3878c609719bSwdenk 387924ee89b9Swdenk* build a standard "vmlinux" kernel image (in ELF binary format): 388024ee89b9Swdenk 388124ee89b9Swdenk* convert the kernel into a raw binary image: 388224ee89b9Swdenk 388324ee89b9Swdenk ${CROSS_COMPILE}-objcopy -O binary \ 388424ee89b9Swdenk -R .note -R .comment \ 388524ee89b9Swdenk -S vmlinux linux.bin 388624ee89b9Swdenk 388724ee89b9Swdenk* compress the binary image: 388824ee89b9Swdenk 388924ee89b9Swdenk gzip -9 linux.bin 389024ee89b9Swdenk 389124ee89b9Swdenk* package compressed binary image for U-Boot: 389224ee89b9Swdenk 389324ee89b9Swdenk mkimage -A ppc -O linux -T kernel -C gzip \ 389424ee89b9Swdenk -a 0 -e 0 -n "Linux Kernel Image" \ 389524ee89b9Swdenk -d linux.bin.gz uImage 389624ee89b9Swdenk 389724ee89b9Swdenk 389824ee89b9SwdenkThe "mkimage" tool can also be used to create ramdisk images for use 389924ee89b9Swdenkwith U-Boot, either separated from the Linux kernel image, or 390024ee89b9Swdenkcombined into one file. "mkimage" encapsulates the images with a 64 390124ee89b9Swdenkbyte header containing information about target architecture, 390224ee89b9Swdenkoperating system, image type, compression method, entry points, time 390324ee89b9Swdenkstamp, CRC32 checksums, etc. 390424ee89b9Swdenk 390524ee89b9Swdenk"mkimage" can be called in two ways: to verify existing images and 390624ee89b9Swdenkprint the header information, or to build new images. 3907c609719bSwdenk 3908c609719bSwdenkIn the first form (with "-l" option) mkimage lists the information 3909c609719bSwdenkcontained in the header of an existing U-Boot image; this includes 3910c609719bSwdenkchecksum verification: 3911c609719bSwdenk 3912c609719bSwdenk tools/mkimage -l image 3913c609719bSwdenk -l ==> list image header information 3914c609719bSwdenk 3915c609719bSwdenkThe second form (with "-d" option) is used to build a U-Boot image 3916c609719bSwdenkfrom a "data file" which is used as image payload: 3917c609719bSwdenk 3918c609719bSwdenk tools/mkimage -A arch -O os -T type -C comp -a addr -e ep \ 3919c609719bSwdenk -n name -d data_file image 3920c609719bSwdenk -A ==> set architecture to 'arch' 3921c609719bSwdenk -O ==> set operating system to 'os' 3922c609719bSwdenk -T ==> set image type to 'type' 3923c609719bSwdenk -C ==> set compression type 'comp' 3924c609719bSwdenk -a ==> set load address to 'addr' (hex) 3925c609719bSwdenk -e ==> set entry point to 'ep' (hex) 3926c609719bSwdenk -n ==> set image name to 'name' 3927c609719bSwdenk -d ==> use image data from 'datafile' 3928c609719bSwdenk 392969459791SwdenkRight now, all Linux kernels for PowerPC systems use the same load 393069459791Swdenkaddress (0x00000000), but the entry point address depends on the 393169459791Swdenkkernel version: 3932c609719bSwdenk 3933c609719bSwdenk- 2.2.x kernels have the entry point at 0x0000000C, 393424ee89b9Swdenk- 2.3.x and later kernels have the entry point at 0x00000000. 3935c609719bSwdenk 3936c609719bSwdenkSo a typical call to build a U-Boot image would read: 3937c609719bSwdenk 393824ee89b9Swdenk -> tools/mkimage -n '2.4.4 kernel for TQM850L' \ 393924ee89b9Swdenk > -A ppc -O linux -T kernel -C gzip -a 0 -e 0 \ 3940a47a12beSStefan Roese > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz \ 394124ee89b9Swdenk > examples/uImage.TQM850L 394224ee89b9Swdenk Image Name: 2.4.4 kernel for TQM850L 3943c609719bSwdenk Created: Wed Jul 19 02:34:59 2000 3944c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 3945c609719bSwdenk Data Size: 335725 Bytes = 327.86 kB = 0.32 MB 3946c609719bSwdenk Load Address: 0x00000000 394724ee89b9Swdenk Entry Point: 0x00000000 3948c609719bSwdenk 3949c609719bSwdenkTo verify the contents of the image (or check for corruption): 3950c609719bSwdenk 395124ee89b9Swdenk -> tools/mkimage -l examples/uImage.TQM850L 395224ee89b9Swdenk Image Name: 2.4.4 kernel for TQM850L 3953c609719bSwdenk Created: Wed Jul 19 02:34:59 2000 3954c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 3955c609719bSwdenk Data Size: 335725 Bytes = 327.86 kB = 0.32 MB 3956c609719bSwdenk Load Address: 0x00000000 395724ee89b9Swdenk Entry Point: 0x00000000 3958c609719bSwdenk 3959c609719bSwdenkNOTE: for embedded systems where boot time is critical you can trade 3960c609719bSwdenkspeed for memory and install an UNCOMPRESSED image instead: this 3961c609719bSwdenkneeds more space in Flash, but boots much faster since it does not 3962c609719bSwdenkneed to be uncompressed: 3963c609719bSwdenk 3964a47a12beSStefan Roese -> gunzip /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz 396524ee89b9Swdenk -> tools/mkimage -n '2.4.4 kernel for TQM850L' \ 396624ee89b9Swdenk > -A ppc -O linux -T kernel -C none -a 0 -e 0 \ 3967a47a12beSStefan Roese > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux \ 396824ee89b9Swdenk > examples/uImage.TQM850L-uncompressed 396924ee89b9Swdenk Image Name: 2.4.4 kernel for TQM850L 3970c609719bSwdenk Created: Wed Jul 19 02:34:59 2000 3971c609719bSwdenk Image Type: PowerPC Linux Kernel Image (uncompressed) 3972c609719bSwdenk Data Size: 792160 Bytes = 773.59 kB = 0.76 MB 3973c609719bSwdenk Load Address: 0x00000000 397424ee89b9Swdenk Entry Point: 0x00000000 3975c609719bSwdenk 3976c609719bSwdenk 3977c609719bSwdenkSimilar you can build U-Boot images from a 'ramdisk.image.gz' file 3978c609719bSwdenkwhen your kernel is intended to use an initial ramdisk: 3979c609719bSwdenk 3980c609719bSwdenk -> tools/mkimage -n 'Simple Ramdisk Image' \ 3981c609719bSwdenk > -A ppc -O linux -T ramdisk -C gzip \ 3982c609719bSwdenk > -d /LinuxPPC/images/SIMPLE-ramdisk.image.gz examples/simple-initrd 3983c609719bSwdenk Image Name: Simple Ramdisk Image 3984c609719bSwdenk Created: Wed Jan 12 14:01:50 2000 3985c609719bSwdenk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) 3986c609719bSwdenk Data Size: 566530 Bytes = 553.25 kB = 0.54 MB 3987c609719bSwdenk Load Address: 0x00000000 3988c609719bSwdenk Entry Point: 0x00000000 3989c609719bSwdenk 3990c609719bSwdenk 3991c609719bSwdenkInstalling a Linux Image: 3992c609719bSwdenk------------------------- 3993c609719bSwdenk 3994c609719bSwdenkTo downloading a U-Boot image over the serial (console) interface, 3995c609719bSwdenkyou must convert the image to S-Record format: 3996c609719bSwdenk 3997c609719bSwdenk objcopy -I binary -O srec examples/image examples/image.srec 3998c609719bSwdenk 3999c609719bSwdenkThe 'objcopy' does not understand the information in the U-Boot 4000c609719bSwdenkimage header, so the resulting S-Record file will be relative to 4001c609719bSwdenkaddress 0x00000000. To load it to a given address, you need to 4002c609719bSwdenkspecify the target address as 'offset' parameter with the 'loads' 4003c609719bSwdenkcommand. 4004c609719bSwdenk 4005c609719bSwdenkExample: install the image to address 0x40100000 (which on the 4006c609719bSwdenkTQM8xxL is in the first Flash bank): 4007c609719bSwdenk 4008c609719bSwdenk => erase 40100000 401FFFFF 4009c609719bSwdenk 4010c609719bSwdenk .......... done 4011c609719bSwdenk Erased 8 sectors 4012c609719bSwdenk 4013c609719bSwdenk => loads 40100000 4014c609719bSwdenk ## Ready for S-Record download ... 4015c609719bSwdenk ~>examples/image.srec 4016c609719bSwdenk 1 2 3 4 5 6 7 8 9 10 11 12 13 ... 4017c609719bSwdenk ... 4018c609719bSwdenk 15989 15990 15991 15992 4019c609719bSwdenk [file transfer complete] 4020c609719bSwdenk [connected] 4021c609719bSwdenk ## Start Addr = 0x00000000 4022c609719bSwdenk 4023c609719bSwdenk 4024c609719bSwdenkYou can check the success of the download using the 'iminfo' command; 4025c609719bSwdenkthis includes a checksum verification so you can be sure no data 4026c609719bSwdenkcorruption happened: 4027c609719bSwdenk 4028c609719bSwdenk => imi 40100000 4029c609719bSwdenk 4030c609719bSwdenk ## Checking Image at 40100000 ... 4031c609719bSwdenk Image Name: 2.2.13 for initrd on TQM850L 4032c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 4033c609719bSwdenk Data Size: 335725 Bytes = 327 kB = 0 MB 4034c609719bSwdenk Load Address: 00000000 4035c609719bSwdenk Entry Point: 0000000c 4036c609719bSwdenk Verifying Checksum ... OK 4037c609719bSwdenk 4038c609719bSwdenk 4039c609719bSwdenkBoot Linux: 4040c609719bSwdenk----------- 4041c609719bSwdenk 4042c609719bSwdenkThe "bootm" command is used to boot an application that is stored in 4043c609719bSwdenkmemory (RAM or Flash). In case of a Linux kernel image, the contents 4044c609719bSwdenkof the "bootargs" environment variable is passed to the kernel as 4045c609719bSwdenkparameters. You can check and modify this variable using the 4046c609719bSwdenk"printenv" and "setenv" commands: 4047c609719bSwdenk 4048c609719bSwdenk 4049c609719bSwdenk => printenv bootargs 4050c609719bSwdenk bootargs=root=/dev/ram 4051c609719bSwdenk 4052c609719bSwdenk => setenv bootargs root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 4053c609719bSwdenk 4054c609719bSwdenk => printenv bootargs 4055c609719bSwdenk bootargs=root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 4056c609719bSwdenk 4057c609719bSwdenk => bootm 40020000 4058c609719bSwdenk ## Booting Linux kernel at 40020000 ... 4059c609719bSwdenk Image Name: 2.2.13 for NFS on TQM850L 4060c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 4061c609719bSwdenk Data Size: 381681 Bytes = 372 kB = 0 MB 4062c609719bSwdenk Load Address: 00000000 4063c609719bSwdenk Entry Point: 0000000c 4064c609719bSwdenk Verifying Checksum ... OK 4065c609719bSwdenk Uncompressing Kernel Image ... OK 4066c609719bSwdenk Linux version 2.2.13 (wd@denx.local.net) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 19 02:35:17 MEST 2000 4067c609719bSwdenk Boot arguments: root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 4068c609719bSwdenk time_init: decrementer frequency = 187500000/60 4069c609719bSwdenk Calibrating delay loop... 49.77 BogoMIPS 4070c609719bSwdenk Memory: 15208k available (700k kernel code, 444k data, 32k init) [c0000000,c1000000] 4071c609719bSwdenk ... 4072c609719bSwdenk 407311ccc33fSMarcel ZiswilerIf you want to boot a Linux kernel with initial RAM disk, you pass 40747152b1d0Swdenkthe memory addresses of both the kernel and the initrd image (PPBCOOT 4075c609719bSwdenkformat!) to the "bootm" command: 4076c609719bSwdenk 4077c609719bSwdenk => imi 40100000 40200000 4078c609719bSwdenk 4079c609719bSwdenk ## Checking Image at 40100000 ... 4080c609719bSwdenk Image Name: 2.2.13 for initrd on TQM850L 4081c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 4082c609719bSwdenk Data Size: 335725 Bytes = 327 kB = 0 MB 4083c609719bSwdenk Load Address: 00000000 4084c609719bSwdenk Entry Point: 0000000c 4085c609719bSwdenk Verifying Checksum ... OK 4086c609719bSwdenk 4087c609719bSwdenk ## Checking Image at 40200000 ... 4088c609719bSwdenk Image Name: Simple Ramdisk Image 4089c609719bSwdenk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) 4090c609719bSwdenk Data Size: 566530 Bytes = 553 kB = 0 MB 4091c609719bSwdenk Load Address: 00000000 4092c609719bSwdenk Entry Point: 00000000 4093c609719bSwdenk Verifying Checksum ... OK 4094c609719bSwdenk 4095c609719bSwdenk => bootm 40100000 40200000 4096c609719bSwdenk ## Booting Linux kernel at 40100000 ... 4097c609719bSwdenk Image Name: 2.2.13 for initrd on TQM850L 4098c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 4099c609719bSwdenk Data Size: 335725 Bytes = 327 kB = 0 MB 4100c609719bSwdenk Load Address: 00000000 4101c609719bSwdenk Entry Point: 0000000c 4102c609719bSwdenk Verifying Checksum ... OK 4103c609719bSwdenk Uncompressing Kernel Image ... OK 4104c609719bSwdenk ## Loading RAMDisk Image at 40200000 ... 4105c609719bSwdenk Image Name: Simple Ramdisk Image 4106c609719bSwdenk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) 4107c609719bSwdenk Data Size: 566530 Bytes = 553 kB = 0 MB 4108c609719bSwdenk Load Address: 00000000 4109c609719bSwdenk Entry Point: 00000000 4110c609719bSwdenk Verifying Checksum ... OK 4111c609719bSwdenk Loading Ramdisk ... OK 4112c609719bSwdenk Linux version 2.2.13 (wd@denx.local.net) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 19 02:32:08 MEST 2000 4113c609719bSwdenk Boot arguments: root=/dev/ram 4114c609719bSwdenk time_init: decrementer frequency = 187500000/60 4115c609719bSwdenk Calibrating delay loop... 49.77 BogoMIPS 4116c609719bSwdenk ... 4117c609719bSwdenk RAMDISK: Compressed image found at block 0 4118c609719bSwdenk VFS: Mounted root (ext2 filesystem). 4119c609719bSwdenk 4120c609719bSwdenk bash# 4121c609719bSwdenk 41220267768eSMatthew McClintockBoot Linux and pass a flat device tree: 41230267768eSMatthew McClintock----------- 41240267768eSMatthew McClintock 41250267768eSMatthew McClintockFirst, U-Boot must be compiled with the appropriate defines. See the section 41260267768eSMatthew McClintocktitled "Linux Kernel Interface" above for a more in depth explanation. The 41270267768eSMatthew McClintockfollowing is an example of how to start a kernel and pass an updated 41280267768eSMatthew McClintockflat device tree: 41290267768eSMatthew McClintock 41300267768eSMatthew McClintock=> print oftaddr 41310267768eSMatthew McClintockoftaddr=0x300000 41320267768eSMatthew McClintock=> print oft 41330267768eSMatthew McClintockoft=oftrees/mpc8540ads.dtb 41340267768eSMatthew McClintock=> tftp $oftaddr $oft 41350267768eSMatthew McClintockSpeed: 1000, full duplex 41360267768eSMatthew McClintockUsing TSEC0 device 41370267768eSMatthew McClintockTFTP from server 192.168.1.1; our IP address is 192.168.1.101 41380267768eSMatthew McClintockFilename 'oftrees/mpc8540ads.dtb'. 41390267768eSMatthew McClintockLoad address: 0x300000 41400267768eSMatthew McClintockLoading: # 41410267768eSMatthew McClintockdone 41420267768eSMatthew McClintockBytes transferred = 4106 (100a hex) 41430267768eSMatthew McClintock=> tftp $loadaddr $bootfile 41440267768eSMatthew McClintockSpeed: 1000, full duplex 41450267768eSMatthew McClintockUsing TSEC0 device 41460267768eSMatthew McClintockTFTP from server 192.168.1.1; our IP address is 192.168.1.2 41470267768eSMatthew McClintockFilename 'uImage'. 41480267768eSMatthew McClintockLoad address: 0x200000 41490267768eSMatthew McClintockLoading:############ 41500267768eSMatthew McClintockdone 41510267768eSMatthew McClintockBytes transferred = 1029407 (fb51f hex) 41520267768eSMatthew McClintock=> print loadaddr 41530267768eSMatthew McClintockloadaddr=200000 41540267768eSMatthew McClintock=> print oftaddr 41550267768eSMatthew McClintockoftaddr=0x300000 41560267768eSMatthew McClintock=> bootm $loadaddr - $oftaddr 41570267768eSMatthew McClintock## Booting image at 00200000 ... 41580267768eSMatthew McClintock Image Name: Linux-2.6.17-dirty 41590267768eSMatthew McClintock Image Type: PowerPC Linux Kernel Image (gzip compressed) 41600267768eSMatthew McClintock Data Size: 1029343 Bytes = 1005.2 kB 41610267768eSMatthew McClintock Load Address: 00000000 41620267768eSMatthew McClintock Entry Point: 00000000 41630267768eSMatthew McClintock Verifying Checksum ... OK 41640267768eSMatthew McClintock Uncompressing Kernel Image ... OK 41650267768eSMatthew McClintockBooting using flat device tree at 0x300000 41660267768eSMatthew McClintockUsing MPC85xx ADS machine description 41670267768eSMatthew McClintockMemory CAM mapping: CAM0=256Mb, CAM1=256Mb, CAM2=0Mb residual: 0Mb 41680267768eSMatthew McClintock[snip] 41690267768eSMatthew McClintock 41700267768eSMatthew McClintock 41716069ff26SwdenkMore About U-Boot Image Types: 41726069ff26Swdenk------------------------------ 41736069ff26Swdenk 41746069ff26SwdenkU-Boot supports the following image types: 41756069ff26Swdenk 41766069ff26Swdenk "Standalone Programs" are directly runnable in the environment 41776069ff26Swdenk provided by U-Boot; it is expected that (if they behave 41786069ff26Swdenk well) you can continue to work in U-Boot after return from 41796069ff26Swdenk the Standalone Program. 41806069ff26Swdenk "OS Kernel Images" are usually images of some Embedded OS which 41816069ff26Swdenk will take over control completely. Usually these programs 41826069ff26Swdenk will install their own set of exception handlers, device 41836069ff26Swdenk drivers, set up the MMU, etc. - this means, that you cannot 41846069ff26Swdenk expect to re-enter U-Boot except by resetting the CPU. 41856069ff26Swdenk "RAMDisk Images" are more or less just data blocks, and their 41866069ff26Swdenk parameters (address, size) are passed to an OS kernel that is 41876069ff26Swdenk being started. 41886069ff26Swdenk "Multi-File Images" contain several images, typically an OS 41896069ff26Swdenk (Linux) kernel image and one or more data images like 41906069ff26Swdenk RAMDisks. This construct is useful for instance when you want 41916069ff26Swdenk to boot over the network using BOOTP etc., where the boot 41926069ff26Swdenk server provides just a single image file, but you want to get 41936069ff26Swdenk for instance an OS kernel and a RAMDisk image. 41946069ff26Swdenk 41956069ff26Swdenk "Multi-File Images" start with a list of image sizes, each 41966069ff26Swdenk image size (in bytes) specified by an "uint32_t" in network 41976069ff26Swdenk byte order. This list is terminated by an "(uint32_t)0". 41986069ff26Swdenk Immediately after the terminating 0 follow the images, one by 41996069ff26Swdenk one, all aligned on "uint32_t" boundaries (size rounded up to 42006069ff26Swdenk a multiple of 4 bytes). 42016069ff26Swdenk 42026069ff26Swdenk "Firmware Images" are binary images containing firmware (like 42036069ff26Swdenk U-Boot or FPGA images) which usually will be programmed to 42046069ff26Swdenk flash memory. 42056069ff26Swdenk 42066069ff26Swdenk "Script files" are command sequences that will be executed by 42076069ff26Swdenk U-Boot's command interpreter; this feature is especially 42086069ff26Swdenk useful when you configure U-Boot to use a real shell (hush) 42096069ff26Swdenk as command interpreter. 42106069ff26Swdenk 4211c609719bSwdenk 4212c609719bSwdenkStandalone HOWTO: 4213c609719bSwdenk================= 4214c609719bSwdenk 4215c609719bSwdenkOne of the features of U-Boot is that you can dynamically load and 4216c609719bSwdenkrun "standalone" applications, which can use some resources of 4217c609719bSwdenkU-Boot like console I/O functions or interrupt services. 4218c609719bSwdenk 4219c609719bSwdenkTwo simple examples are included with the sources: 4220c609719bSwdenk 4221c609719bSwdenk"Hello World" Demo: 4222c609719bSwdenk------------------- 4223c609719bSwdenk 4224c609719bSwdenk'examples/hello_world.c' contains a small "Hello World" Demo 4225c609719bSwdenkapplication; it is automatically compiled when you build U-Boot. 4226c609719bSwdenkIt's configured to run at address 0x00040004, so you can play with it 4227c609719bSwdenklike that: 4228c609719bSwdenk 4229c609719bSwdenk => loads 4230c609719bSwdenk ## Ready for S-Record download ... 4231c609719bSwdenk ~>examples/hello_world.srec 4232c609719bSwdenk 1 2 3 4 5 6 7 8 9 10 11 ... 4233c609719bSwdenk [file transfer complete] 4234c609719bSwdenk [connected] 4235c609719bSwdenk ## Start Addr = 0x00040004 4236c609719bSwdenk 4237c609719bSwdenk => go 40004 Hello World! This is a test. 4238c609719bSwdenk ## Starting application at 0x00040004 ... 4239c609719bSwdenk Hello World 4240c609719bSwdenk argc = 7 4241c609719bSwdenk argv[0] = "40004" 4242c609719bSwdenk argv[1] = "Hello" 4243c609719bSwdenk argv[2] = "World!" 4244c609719bSwdenk argv[3] = "This" 4245c609719bSwdenk argv[4] = "is" 4246c609719bSwdenk argv[5] = "a" 4247c609719bSwdenk argv[6] = "test." 4248c609719bSwdenk argv[7] = "<NULL>" 4249c609719bSwdenk Hit any key to exit ... 4250c609719bSwdenk 4251c609719bSwdenk ## Application terminated, rc = 0x0 4252c609719bSwdenk 4253c609719bSwdenkAnother example, which demonstrates how to register a CPM interrupt 4254c609719bSwdenkhandler with the U-Boot code, can be found in 'examples/timer.c'. 4255c609719bSwdenkHere, a CPM timer is set up to generate an interrupt every second. 4256c609719bSwdenkThe interrupt service routine is trivial, just printing a '.' 4257c609719bSwdenkcharacter, but this is just a demo program. The application can be 4258c609719bSwdenkcontrolled by the following keys: 4259c609719bSwdenk 4260c609719bSwdenk ? - print current values og the CPM Timer registers 4261c609719bSwdenk b - enable interrupts and start timer 4262c609719bSwdenk e - stop timer and disable interrupts 4263c609719bSwdenk q - quit application 4264c609719bSwdenk 4265c609719bSwdenk => loads 4266c609719bSwdenk ## Ready for S-Record download ... 4267c609719bSwdenk ~>examples/timer.srec 4268c609719bSwdenk 1 2 3 4 5 6 7 8 9 10 11 ... 4269c609719bSwdenk [file transfer complete] 4270c609719bSwdenk [connected] 4271c609719bSwdenk ## Start Addr = 0x00040004 4272c609719bSwdenk 4273c609719bSwdenk => go 40004 4274c609719bSwdenk ## Starting application at 0x00040004 ... 4275c609719bSwdenk TIMERS=0xfff00980 4276c609719bSwdenk Using timer 1 4277c609719bSwdenk tgcr @ 0xfff00980, tmr @ 0xfff00990, trr @ 0xfff00994, tcr @ 0xfff00998, tcn @ 0xfff0099c, ter @ 0xfff009b0 4278c609719bSwdenk 4279c609719bSwdenkHit 'b': 4280c609719bSwdenk [q, b, e, ?] Set interval 1000000 us 4281c609719bSwdenk Enabling timer 4282c609719bSwdenkHit '?': 4283c609719bSwdenk [q, b, e, ?] ........ 4284c609719bSwdenk tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0xef6, ter=0x0 4285c609719bSwdenkHit '?': 4286c609719bSwdenk [q, b, e, ?] . 4287c609719bSwdenk tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x2ad4, ter=0x0 4288c609719bSwdenkHit '?': 4289c609719bSwdenk [q, b, e, ?] . 4290c609719bSwdenk tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x1efc, ter=0x0 4291c609719bSwdenkHit '?': 4292c609719bSwdenk [q, b, e, ?] . 4293c609719bSwdenk tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x169d, ter=0x0 4294c609719bSwdenkHit 'e': 4295c609719bSwdenk [q, b, e, ?] ...Stopping timer 4296c609719bSwdenkHit 'q': 4297c609719bSwdenk [q, b, e, ?] ## Application terminated, rc = 0x0 4298c609719bSwdenk 4299c609719bSwdenk 430085ec0bccSwdenkMinicom warning: 430185ec0bccSwdenk================ 430285ec0bccSwdenk 43037152b1d0SwdenkOver time, many people have reported problems when trying to use the 430485ec0bccSwdenk"minicom" terminal emulation program for serial download. I (wd) 430585ec0bccSwdenkconsider minicom to be broken, and recommend not to use it. Under 4306f07771ccSwdenkUnix, I recommend to use C-Kermit for general purpose use (and 430785ec0bccSwdenkespecially for kermit binary protocol download ("loadb" command), and 430885ec0bccSwdenkuse "cu" for S-Record download ("loads" command). 430985ec0bccSwdenk 431052f52c14SwdenkNevertheless, if you absolutely want to use it try adding this 431152f52c14Swdenkconfiguration to your "File transfer protocols" section: 431252f52c14Swdenk 431352f52c14Swdenk Name Program Name U/D FullScr IO-Red. Multi 431452f52c14Swdenk X kermit /usr/bin/kermit -i -l %l -s Y U Y N N 431552f52c14Swdenk Y kermit /usr/bin/kermit -i -l %l -r N D Y N N 431652f52c14Swdenk 431752f52c14Swdenk 4318c609719bSwdenkNetBSD Notes: 4319c609719bSwdenk============= 4320c609719bSwdenk 4321c609719bSwdenkStarting at version 0.9.2, U-Boot supports NetBSD both as host 4322c609719bSwdenk(build U-Boot) and target system (boots NetBSD/mpc8xx). 4323c609719bSwdenk 4324c609719bSwdenkBuilding requires a cross environment; it is known to work on 4325c609719bSwdenkNetBSD/i386 with the cross-powerpc-netbsd-1.3 package (you will also 4326c609719bSwdenkneed gmake since the Makefiles are not compatible with BSD make). 4327c609719bSwdenkNote that the cross-powerpc package does not install include files; 4328c609719bSwdenkattempting to build U-Boot will fail because <machine/ansi.h> is 4329c609719bSwdenkmissing. This file has to be installed and patched manually: 4330c609719bSwdenk 4331c609719bSwdenk # cd /usr/pkg/cross/powerpc-netbsd/include 4332c609719bSwdenk # mkdir powerpc 4333c609719bSwdenk # ln -s powerpc machine 4334c609719bSwdenk # cp /usr/src/sys/arch/powerpc/include/ansi.h powerpc/ansi.h 4335c609719bSwdenk # ${EDIT} powerpc/ansi.h ## must remove __va_list, _BSD_VA_LIST 4336c609719bSwdenk 4337c609719bSwdenkNative builds *don't* work due to incompatibilities between native 4338c609719bSwdenkand U-Boot include files. 4339c609719bSwdenk 4340c609719bSwdenkBooting assumes that (the first part of) the image booted is a 4341c609719bSwdenkstage-2 loader which in turn loads and then invokes the kernel 4342c609719bSwdenkproper. Loader sources will eventually appear in the NetBSD source 4343c609719bSwdenktree (probably in sys/arc/mpc8xx/stand/u-boot_stage2/); in the 43442a8af187Swdenkmeantime, see ftp://ftp.denx.de/pub/u-boot/ppcboot_stage2.tar.gz 4345c609719bSwdenk 4346c609719bSwdenk 4347c609719bSwdenkImplementation Internals: 4348c609719bSwdenk========================= 4349c609719bSwdenk 4350c609719bSwdenkThe following is not intended to be a complete description of every 4351c609719bSwdenkimplementation detail. However, it should help to understand the 4352c609719bSwdenkinner workings of U-Boot and make it easier to port it to custom 4353c609719bSwdenkhardware. 4354c609719bSwdenk 4355c609719bSwdenk 4356c609719bSwdenkInitial Stack, Global Data: 4357c609719bSwdenk--------------------------- 4358c609719bSwdenk 4359c609719bSwdenkThe implementation of U-Boot is complicated by the fact that U-Boot 4360c609719bSwdenkstarts running out of ROM (flash memory), usually without access to 4361c609719bSwdenksystem RAM (because the memory controller is not initialized yet). 4362c609719bSwdenkThis means that we don't have writable Data or BSS segments, and BSS 4363c609719bSwdenkis not initialized as zero. To be able to get a C environment working 4364c609719bSwdenkat all, we have to allocate at least a minimal stack. Implementation 4365c609719bSwdenkoptions for this are defined and restricted by the CPU used: Some CPU 4366c609719bSwdenkmodels provide on-chip memory (like the IMMR area on MPC8xx and 4367c609719bSwdenkMPC826x processors), on others (parts of) the data cache can be 4368c609719bSwdenklocked as (mis-) used as memory, etc. 4369c609719bSwdenk 43707152b1d0Swdenk Chris Hallinan posted a good summary of these issues to the 43710668236bSWolfgang Denk U-Boot mailing list: 437243d9616cSwdenk 437343d9616cSwdenk Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)? 437443d9616cSwdenk From: "Chris Hallinan" <clh@net1plus.com> 437543d9616cSwdenk Date: Mon, 10 Feb 2003 16:43:46 -0500 (22:43 MET) 437643d9616cSwdenk ... 437743d9616cSwdenk 437843d9616cSwdenk Correct me if I'm wrong, folks, but the way I understand it 437943d9616cSwdenk is this: Using DCACHE as initial RAM for Stack, etc, does not 438043d9616cSwdenk require any physical RAM backing up the cache. The cleverness 438143d9616cSwdenk is that the cache is being used as a temporary supply of 438243d9616cSwdenk necessary storage before the SDRAM controller is setup. It's 438311ccc33fSMarcel Ziswiler beyond the scope of this list to explain the details, but you 438443d9616cSwdenk can see how this works by studying the cache architecture and 438543d9616cSwdenk operation in the architecture and processor-specific manuals. 438643d9616cSwdenk 438743d9616cSwdenk OCM is On Chip Memory, which I believe the 405GP has 4K. It 438843d9616cSwdenk is another option for the system designer to use as an 438911ccc33fSMarcel Ziswiler initial stack/RAM area prior to SDRAM being available. Either 439043d9616cSwdenk option should work for you. Using CS 4 should be fine if your 439143d9616cSwdenk board designers haven't used it for something that would 439243d9616cSwdenk cause you grief during the initial boot! It is frequently not 439343d9616cSwdenk used. 439443d9616cSwdenk 43956d0f6bcfSJean-Christophe PLAGNIOL-VILLARD CONFIG_SYS_INIT_RAM_ADDR should be somewhere that won't interfere 439643d9616cSwdenk with your processor/board/system design. The default value 439743d9616cSwdenk you will find in any recent u-boot distribution in 43988a316c9bSStefan Roese walnut.h should work for you. I'd set it to a value larger 439943d9616cSwdenk than your SDRAM module. If you have a 64MB SDRAM module, set 440043d9616cSwdenk it above 400_0000. Just make sure your board has no resources 440143d9616cSwdenk that are supposed to respond to that address! That code in 440243d9616cSwdenk start.S has been around a while and should work as is when 440343d9616cSwdenk you get the config right. 440443d9616cSwdenk 440543d9616cSwdenk -Chris Hallinan 440643d9616cSwdenk DS4.COM, Inc. 440743d9616cSwdenk 4408c609719bSwdenkIt is essential to remember this, since it has some impact on the C 4409c609719bSwdenkcode for the initialization procedures: 4410c609719bSwdenk 4411c609719bSwdenk* Initialized global data (data segment) is read-only. Do not attempt 4412c609719bSwdenk to write it. 4413c609719bSwdenk 441411ccc33fSMarcel Ziswiler* Do not use any uninitialized global data (or implicitely initialized 4415c609719bSwdenk as zero data - BSS segment) at all - this is undefined, initiali- 44167152b1d0Swdenk zation is performed later (when relocating to RAM). 4417c609719bSwdenk 4418c609719bSwdenk* Stack space is very limited. Avoid big data buffers or things like 4419c609719bSwdenk that. 4420c609719bSwdenk 4421c609719bSwdenkHaving only the stack as writable memory limits means we cannot use 4422c609719bSwdenknormal global data to share information beween the code. But it 4423c609719bSwdenkturned out that the implementation of U-Boot can be greatly 4424c609719bSwdenksimplified by making a global data structure (gd_t) available to all 4425c609719bSwdenkfunctions. We could pass a pointer to this data as argument to _all_ 4426c609719bSwdenkfunctions, but this would bloat the code. Instead we use a feature of 4427c609719bSwdenkthe GCC compiler (Global Register Variables) to share the data: we 4428c609719bSwdenkplace a pointer (gd) to the global data into a register which we 4429c609719bSwdenkreserve for this purpose. 4430c609719bSwdenk 44317152b1d0SwdenkWhen choosing a register for such a purpose we are restricted by the 4432c609719bSwdenkrelevant (E)ABI specifications for the current architecture, and by 4433c609719bSwdenkGCC's implementation. 4434c609719bSwdenk 4435c609719bSwdenkFor PowerPC, the following registers have specific use: 4436c609719bSwdenk R1: stack pointer 4437e7670f6cSWolfgang Denk R2: reserved for system use 4438c609719bSwdenk R3-R4: parameter passing and return values 4439c609719bSwdenk R5-R10: parameter passing 4440c609719bSwdenk R13: small data area pointer 4441c609719bSwdenk R30: GOT pointer 4442c609719bSwdenk R31: frame pointer 4443c609719bSwdenk 4444e6bee808SJoakim Tjernlund (U-Boot also uses R12 as internal GOT pointer. r12 4445e6bee808SJoakim Tjernlund is a volatile register so r12 needs to be reset when 4446e6bee808SJoakim Tjernlund going back and forth between asm and C) 4447c609719bSwdenk 4448e7670f6cSWolfgang Denk ==> U-Boot will use R2 to hold a pointer to the global data 4449c609719bSwdenk 4450c609719bSwdenk Note: on PPC, we could use a static initializer (since the 4451c609719bSwdenk address of the global data structure is known at compile time), 4452c609719bSwdenk but it turned out that reserving a register results in somewhat 4453c609719bSwdenk smaller code - although the code savings are not that big (on 4454c609719bSwdenk average for all boards 752 bytes for the whole U-Boot image, 4455c609719bSwdenk 624 text + 127 data). 4456c609719bSwdenk 4457c4db335cSRobin GetzOn Blackfin, the normal C ABI (except for P3) is followed as documented here: 44584c58eb55SMike Frysinger http://docs.blackfin.uclinux.org/doku.php?id=application_binary_interface 44594c58eb55SMike Frysinger 4460c4db335cSRobin Getz ==> U-Boot will use P3 to hold a pointer to the global data 44614c58eb55SMike Frysinger 4462c609719bSwdenkOn ARM, the following registers are used: 4463c609719bSwdenk 4464c609719bSwdenk R0: function argument word/integer result 4465c609719bSwdenk R1-R3: function argument word 4466c609719bSwdenk R9: GOT pointer 4467c609719bSwdenk R10: stack limit (used only if stack checking if enabled) 4468c609719bSwdenk R11: argument (frame) pointer 4469c609719bSwdenk R12: temporary workspace 4470c609719bSwdenk R13: stack pointer 4471c609719bSwdenk R14: link register 4472c609719bSwdenk R15: program counter 4473c609719bSwdenk 4474c609719bSwdenk ==> U-Boot will use R8 to hold a pointer to the global data 4475c609719bSwdenk 44760df01fd3SThomas ChouOn Nios II, the ABI is documented here: 44770df01fd3SThomas Chou http://www.altera.com/literature/hb/nios2/n2cpu_nii51016.pdf 44780df01fd3SThomas Chou 44790df01fd3SThomas Chou ==> U-Boot will use gp to hold a pointer to the global data 44800df01fd3SThomas Chou 44810df01fd3SThomas Chou Note: on Nios II, we give "-G0" option to gcc and don't use gp 44820df01fd3SThomas Chou to access small data sections, so gp is free. 44830df01fd3SThomas Chou 4484afc1ce82SMacpaul LinOn NDS32, the following registers are used: 4485afc1ce82SMacpaul Lin 4486afc1ce82SMacpaul Lin R0-R1: argument/return 4487afc1ce82SMacpaul Lin R2-R5: argument 4488afc1ce82SMacpaul Lin R15: temporary register for assembler 4489afc1ce82SMacpaul Lin R16: trampoline register 4490afc1ce82SMacpaul Lin R28: frame pointer (FP) 4491afc1ce82SMacpaul Lin R29: global pointer (GP) 4492afc1ce82SMacpaul Lin R30: link register (LP) 4493afc1ce82SMacpaul Lin R31: stack pointer (SP) 4494afc1ce82SMacpaul Lin PC: program counter (PC) 4495afc1ce82SMacpaul Lin 4496afc1ce82SMacpaul Lin ==> U-Boot will use R10 to hold a pointer to the global data 4497afc1ce82SMacpaul Lin 4498d87080b7SWolfgang DenkNOTE: DECLARE_GLOBAL_DATA_PTR must be used with file-global scope, 4499d87080b7SWolfgang Denkor current versions of GCC may "optimize" the code too much. 4500c609719bSwdenk 4501c609719bSwdenkMemory Management: 4502c609719bSwdenk------------------ 4503c609719bSwdenk 4504c609719bSwdenkU-Boot runs in system state and uses physical addresses, i.e. the 4505c609719bSwdenkMMU is not used either for address mapping nor for memory protection. 4506c609719bSwdenk 4507c609719bSwdenkThe available memory is mapped to fixed addresses using the memory 4508c609719bSwdenkcontroller. In this process, a contiguous block is formed for each 4509c609719bSwdenkmemory type (Flash, SDRAM, SRAM), even when it consists of several 4510c609719bSwdenkphysical memory banks. 4511c609719bSwdenk 4512c609719bSwdenkU-Boot is installed in the first 128 kB of the first Flash bank (on 4513c609719bSwdenkTQM8xxL modules this is the range 0x40000000 ... 0x4001FFFF). After 4514c609719bSwdenkbooting and sizing and initializing DRAM, the code relocates itself 4515c609719bSwdenkto the upper end of DRAM. Immediately below the U-Boot code some 45166d0f6bcfSJean-Christophe PLAGNIOL-VILLARDmemory is reserved for use by malloc() [see CONFIG_SYS_MALLOC_LEN 4517c609719bSwdenkconfiguration setting]. Below that, a structure with global Board 4518c609719bSwdenkInfo data is placed, followed by the stack (growing downward). 4519c609719bSwdenk 4520c609719bSwdenkAdditionally, some exception handler code is copied to the low 8 kB 4521c609719bSwdenkof DRAM (0x00000000 ... 0x00001FFF). 4522c609719bSwdenk 4523c609719bSwdenkSo a typical memory configuration with 16 MB of DRAM could look like 4524c609719bSwdenkthis: 4525c609719bSwdenk 4526c609719bSwdenk 0x0000 0000 Exception Vector code 4527c609719bSwdenk : 4528c609719bSwdenk 0x0000 1FFF 4529c609719bSwdenk 0x0000 2000 Free for Application Use 4530c609719bSwdenk : 4531c609719bSwdenk : 4532c609719bSwdenk 4533c609719bSwdenk : 4534c609719bSwdenk : 4535c609719bSwdenk 0x00FB FF20 Monitor Stack (Growing downward) 4536c609719bSwdenk 0x00FB FFAC Board Info Data and permanent copy of global data 4537c609719bSwdenk 0x00FC 0000 Malloc Arena 4538c609719bSwdenk : 4539c609719bSwdenk 0x00FD FFFF 4540c609719bSwdenk 0x00FE 0000 RAM Copy of Monitor Code 4541c609719bSwdenk ... eventually: LCD or video framebuffer 4542c609719bSwdenk ... eventually: pRAM (Protected RAM - unchanged by reset) 4543c609719bSwdenk 0x00FF FFFF [End of RAM] 4544c609719bSwdenk 4545c609719bSwdenk 4546c609719bSwdenkSystem Initialization: 4547c609719bSwdenk---------------------- 4548c609719bSwdenk 4549c609719bSwdenkIn the reset configuration, U-Boot starts at the reset entry point 455011ccc33fSMarcel Ziswiler(on most PowerPC systems at address 0x00000100). Because of the reset 4551c609719bSwdenkconfiguration for CS0# this is a mirror of the onboard Flash memory. 45527152b1d0SwdenkTo be able to re-map memory U-Boot then jumps to its link address. 4553c609719bSwdenkTo be able to implement the initialization code in C, a (small!) 4554c609719bSwdenkinitial stack is set up in the internal Dual Ported RAM (in case CPUs 4555c609719bSwdenkwhich provide such a feature like MPC8xx or MPC8260), or in a locked 4556c609719bSwdenkpart of the data cache. After that, U-Boot initializes the CPU core, 4557c609719bSwdenkthe caches and the SIU. 4558c609719bSwdenk 4559c609719bSwdenkNext, all (potentially) available memory banks are mapped using a 4560c609719bSwdenkpreliminary mapping. For example, we put them on 512 MB boundaries 4561c609719bSwdenk(multiples of 0x20000000: SDRAM on 0x00000000 and 0x20000000, Flash 4562c609719bSwdenkon 0x40000000 and 0x60000000, SRAM on 0x80000000). Then UPM A is 4563c609719bSwdenkprogrammed for SDRAM access. Using the temporary configuration, a 4564c609719bSwdenksimple memory test is run that determines the size of the SDRAM 4565c609719bSwdenkbanks. 4566c609719bSwdenk 4567c609719bSwdenkWhen there is more than one SDRAM bank, and the banks are of 45687152b1d0Swdenkdifferent size, the largest is mapped first. For equal size, the first 4569c609719bSwdenkbank (CS2#) is mapped first. The first mapping is always for address 4570c609719bSwdenk0x00000000, with any additional banks following immediately to create 4571c609719bSwdenkcontiguous memory starting from 0. 4572c609719bSwdenk 4573c609719bSwdenkThen, the monitor installs itself at the upper end of the SDRAM area 4574c609719bSwdenkand allocates memory for use by malloc() and for the global Board 4575c609719bSwdenkInfo data; also, the exception vector code is copied to the low RAM 4576c609719bSwdenkpages, and the final stack is set up. 4577c609719bSwdenk 4578c609719bSwdenkOnly after this relocation will you have a "normal" C environment; 4579c609719bSwdenkuntil that you are restricted in several ways, mostly because you are 4580c609719bSwdenkrunning from ROM, and because the code will have to be relocated to a 4581c609719bSwdenknew address in RAM. 4582c609719bSwdenk 4583c609719bSwdenk 4584c609719bSwdenkU-Boot Porting Guide: 4585c609719bSwdenk---------------------- 4586c609719bSwdenk 4587c609719bSwdenk[Based on messages by Jerry Van Baren in the U-Boot-Users mailing 45886aff3115Swdenklist, October 2002] 4589c609719bSwdenk 4590c609719bSwdenk 4591c609719bSwdenkint main(int argc, char *argv[]) 4592c609719bSwdenk{ 4593c609719bSwdenk sighandler_t no_more_time; 4594c609719bSwdenk 4595c609719bSwdenk signal(SIGALRM, no_more_time); 4596c609719bSwdenk alarm(PROJECT_DEADLINE - toSec (3 * WEEK)); 4597c609719bSwdenk 4598c609719bSwdenk if (available_money > available_manpower) { 45996c3fef28SJerry Van Baren Pay consultant to port U-Boot; 4600c609719bSwdenk return 0; 4601c609719bSwdenk } 4602c609719bSwdenk 4603c609719bSwdenk Download latest U-Boot source; 4604c609719bSwdenk 46050668236bSWolfgang Denk Subscribe to u-boot mailing list; 46066aff3115Swdenk 46076c3fef28SJerry Van Baren if (clueless) 4608c609719bSwdenk email("Hi, I am new to U-Boot, how do I get started?"); 4609c609719bSwdenk 4610c609719bSwdenk while (learning) { 4611c609719bSwdenk Read the README file in the top level directory; 46127cb22f97Swdenk Read http://www.denx.de/twiki/bin/view/DULG/Manual; 46136c3fef28SJerry Van Baren Read applicable doc/*.README; 4614c609719bSwdenk Read the source, Luke; 46156c3fef28SJerry Van Baren /* find . -name "*.[chS]" | xargs grep -i <keyword> */ 4616c609719bSwdenk } 4617c609719bSwdenk 46186c3fef28SJerry Van Baren if (available_money > toLocalCurrency ($2500)) 46196c3fef28SJerry Van Baren Buy a BDI3000; 46206c3fef28SJerry Van Baren else 4621c609719bSwdenk Add a lot of aggravation and time; 4622c609719bSwdenk 46236c3fef28SJerry Van Baren if (a similar board exists) { /* hopefully... */ 46246c3fef28SJerry Van Baren cp -a board/<similar> board/<myboard> 46256c3fef28SJerry Van Baren cp include/configs/<similar>.h include/configs/<myboard>.h 46266c3fef28SJerry Van Baren } else { 4627c609719bSwdenk Create your own board support subdirectory; 46286c3fef28SJerry Van Baren Create your own board include/configs/<myboard>.h file; 46296c3fef28SJerry Van Baren } 46306c3fef28SJerry Van Baren Edit new board/<myboard> files 46316c3fef28SJerry Van Baren Edit new include/configs/<myboard>.h 4632c609719bSwdenk 46336c3fef28SJerry Van Baren while (!accepted) { 4634c609719bSwdenk while (!running) { 4635c609719bSwdenk do { 4636c609719bSwdenk Add / modify source code; 4637c609719bSwdenk } until (compiles); 4638c609719bSwdenk Debug; 4639c609719bSwdenk if (clueless) 4640c609719bSwdenk email("Hi, I am having problems..."); 4641c609719bSwdenk } 46426c3fef28SJerry Van Baren Send patch file to the U-Boot email list; 46436c3fef28SJerry Van Baren if (reasonable critiques) 46446c3fef28SJerry Van Baren Incorporate improvements from email list code review; 46456c3fef28SJerry Van Baren else 46466c3fef28SJerry Van Baren Defend code as written; 46476c3fef28SJerry Van Baren } 4648c609719bSwdenk 4649c609719bSwdenk return 0; 4650c609719bSwdenk} 4651c609719bSwdenk 4652c609719bSwdenkvoid no_more_time (int sig) 4653c609719bSwdenk{ 4654c609719bSwdenk hire_a_guru(); 4655c609719bSwdenk} 4656c609719bSwdenk 4657c609719bSwdenk 4658c609719bSwdenkCoding Standards: 4659c609719bSwdenk----------------- 4660c609719bSwdenk 4661c609719bSwdenkAll contributions to U-Boot should conform to the Linux kernel 46622c051651SDetlev Zundelcoding style; see the file "Documentation/CodingStyle" and the script 46637ca9296eSWolfgang Denk"scripts/Lindent" in your Linux kernel source directory. 4664c609719bSwdenk 46652c051651SDetlev ZundelSource files originating from a different project (for example the 46662c051651SDetlev ZundelMTD subsystem) are generally exempt from these guidelines and are not 46672c051651SDetlev Zundelreformated to ease subsequent migration to newer versions of those 46682c051651SDetlev Zundelsources. 46692c051651SDetlev Zundel 46702c051651SDetlev ZundelPlease note that U-Boot is implemented in C (and to some small parts in 46712c051651SDetlev ZundelAssembler); no C++ is used, so please do not use C++ style comments (//) 46722c051651SDetlev Zundelin your code. 4673c609719bSwdenk 4674c178d3daSwdenkPlease also stick to the following formatting rules: 4675180d3f74Swdenk- remove any trailing white space 46767ca9296eSWolfgang Denk- use TAB characters for indentation and vertical alignment, not spaces 4677180d3f74Swdenk- make sure NOT to use DOS '\r\n' line feeds 46787ca9296eSWolfgang Denk- do not add more than 2 consecutive empty lines to source files 4679180d3f74Swdenk- do not add trailing empty lines to source files 4680180d3f74Swdenk 4681c609719bSwdenkSubmissions which do not conform to the standards may be returned 4682c609719bSwdenkwith a request to reformat the changes. 4683c609719bSwdenk 4684c609719bSwdenk 4685c609719bSwdenkSubmitting Patches: 4686c609719bSwdenk------------------- 4687c609719bSwdenk 4688c609719bSwdenkSince the number of patches for U-Boot is growing, we need to 4689c609719bSwdenkestablish some rules. Submissions which do not conform to these rules 4690c609719bSwdenkmay be rejected, even when they contain important and valuable stuff. 4691c609719bSwdenk 46920d28f34bSMagnus LiljaPlease see http://www.denx.de/wiki/U-Boot/Patches for details. 4693218ca724SWolfgang Denk 46940668236bSWolfgang DenkPatches shall be sent to the u-boot mailing list <u-boot@lists.denx.de>; 46950668236bSWolfgang Denksee http://lists.denx.de/mailman/listinfo/u-boot 46960668236bSWolfgang Denk 4697c609719bSwdenkWhen you send a patch, please include the following information with 4698c609719bSwdenkit: 4699c609719bSwdenk 4700c609719bSwdenk* For bug fixes: a description of the bug and how your patch fixes 4701c609719bSwdenk this bug. Please try to include a way of demonstrating that the 4702c609719bSwdenk patch actually fixes something. 4703c609719bSwdenk 4704c609719bSwdenk* For new features: a description of the feature and your 4705c609719bSwdenk implementation. 4706c609719bSwdenk 4707c609719bSwdenk* A CHANGELOG entry as plaintext (separate from the patch) 4708c609719bSwdenk 4709c609719bSwdenk* For major contributions, your entry to the CREDITS file 4710c609719bSwdenk 4711c609719bSwdenk* When you add support for a new board, don't forget to add this 47127ca9296eSWolfgang Denk board to the MAINTAINERS file, too. 4713c609719bSwdenk 4714c609719bSwdenk* If your patch adds new configuration options, don't forget to 4715c609719bSwdenk document these in the README file. 4716c609719bSwdenk 4717218ca724SWolfgang Denk* The patch itself. If you are using git (which is *strongly* 4718218ca724SWolfgang Denk recommended) you can easily generate the patch using the 47197ca9296eSWolfgang Denk "git format-patch". If you then use "git send-email" to send it to 4720218ca724SWolfgang Denk the U-Boot mailing list, you will avoid most of the common problems 4721218ca724SWolfgang Denk with some other mail clients. 4722c609719bSwdenk 4723218ca724SWolfgang Denk If you cannot use git, use "diff -purN OLD NEW". If your version of 4724218ca724SWolfgang Denk diff does not support these options, then get the latest version of 4725218ca724SWolfgang Denk GNU diff. 47266dff5529Swdenk 4727218ca724SWolfgang Denk The current directory when running this command shall be the parent 4728218ca724SWolfgang Denk directory of the U-Boot source tree (i. e. please make sure that 4729218ca724SWolfgang Denk your patch includes sufficient directory information for the 4730218ca724SWolfgang Denk affected files). 4731218ca724SWolfgang Denk 4732218ca724SWolfgang Denk We prefer patches as plain text. MIME attachments are discouraged, 4733218ca724SWolfgang Denk and compressed attachments must not be used. 4734c609719bSwdenk 473552f52c14Swdenk* If one logical set of modifications affects or creates several 473652f52c14Swdenk files, all these changes shall be submitted in a SINGLE patch file. 473752f52c14Swdenk 473852f52c14Swdenk* Changesets that contain different, unrelated modifications shall be 473952f52c14Swdenk submitted as SEPARATE patches, one patch per changeset. 474052f52c14Swdenk 474152f52c14Swdenk 4742c609719bSwdenkNotes: 4743c609719bSwdenk 4744c609719bSwdenk* Before sending the patch, run the MAKEALL script on your patched 4745c609719bSwdenk source tree and make sure that no errors or warnings are reported 4746c609719bSwdenk for any of the boards. 4747c609719bSwdenk 4748c609719bSwdenk* Keep your modifications to the necessary minimum: A patch 4749c609719bSwdenk containing several unrelated changes or arbitrary reformats will be 4750c609719bSwdenk returned with a request to re-formatting / split it. 4751c609719bSwdenk 4752c609719bSwdenk* If you modify existing code, make sure that your new code does not 4753c609719bSwdenk add to the memory footprint of the code ;-) Small is beautiful! 4754c609719bSwdenk When adding new features, these should compile conditionally only 4755c609719bSwdenk (using #ifdef), and the resulting code with the new feature 4756c609719bSwdenk disabled must not need more memory than the old code without your 4757c609719bSwdenk modification. 475890dc6704Swdenk 47590668236bSWolfgang Denk* Remember that there is a size limit of 100 kB per message on the 47600668236bSWolfgang Denk u-boot mailing list. Bigger patches will be moderated. If they are 47610668236bSWolfgang Denk reasonable and not too big, they will be acknowledged. But patches 47620668236bSWolfgang Denk bigger than the size limit should be avoided. 4763