xref: /openbmc/u-boot/README (revision 0abddf82d54c704cf066524235b6414333e8d087)
1c609719bSwdenk#
2cccfc2abSDetlev Zundel# (C) Copyright 2000 - 2009
3c609719bSwdenk# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4c609719bSwdenk#
5c609719bSwdenk# See file CREDITS for list of people who contributed to this
6c609719bSwdenk# project.
7c609719bSwdenk#
8c609719bSwdenk# This program is free software; you can redistribute it and/or
9c609719bSwdenk# modify it under the terms of the GNU General Public License as
10c609719bSwdenk# published by the Free Software Foundation; either version 2 of
11c609719bSwdenk# the License, or (at your option) any later version.
12c609719bSwdenk#
13c609719bSwdenk# This program is distributed in the hope that it will be useful,
14c609719bSwdenk# but WITHOUT ANY WARRANTY; without even the implied warranty of
15c609719bSwdenk# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
16c609719bSwdenk# GNU General Public License for more details.
17c609719bSwdenk#
18c609719bSwdenk# You should have received a copy of the GNU General Public License
19c609719bSwdenk# along with this program; if not, write to the Free Software
20c609719bSwdenk# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21c609719bSwdenk# MA 02111-1307 USA
22c609719bSwdenk#
23c609719bSwdenk
24c609719bSwdenkSummary:
25c609719bSwdenk========
26c609719bSwdenk
2724ee89b9SwdenkThis directory contains the source code for U-Boot, a boot loader for
28e86e5a07SwdenkEmbedded boards based on PowerPC, ARM, MIPS and several other
29e86e5a07Swdenkprocessors, which can be installed in a boot ROM and used to
30e86e5a07Swdenkinitialize and test the hardware or to download and run application
31e86e5a07Swdenkcode.
32c609719bSwdenk
33c609719bSwdenkThe development of U-Boot is closely related to Linux: some parts of
3424ee89b9Swdenkthe source code originate in the Linux source tree, we have some
3524ee89b9Swdenkheader files in common, and special provision has been made to
36c609719bSwdenksupport booting of Linux images.
37c609719bSwdenk
38c609719bSwdenkSome attention has been paid to make this software easily
39c609719bSwdenkconfigurable and extendable. For instance, all monitor commands are
40c609719bSwdenkimplemented with the same call interface, so that it's very easy to
41c609719bSwdenkadd new commands. Also, instead of permanently adding rarely used
42c609719bSwdenkcode (for instance hardware test utilities) to the monitor, you can
43c609719bSwdenkload and run it dynamically.
44c609719bSwdenk
45c609719bSwdenk
46c609719bSwdenkStatus:
47c609719bSwdenk=======
48c609719bSwdenk
49c609719bSwdenkIn general, all boards for which a configuration option exists in the
50c609719bSwdenkMakefile have been tested to some extent and can be considered
51c609719bSwdenk"working". In fact, many of them are used in production systems.
52c609719bSwdenk
53c609719bSwdenkIn case of problems see the CHANGELOG and CREDITS files to find out
54218ca724SWolfgang Denkwho contributed the specific port. The MAINTAINERS file lists board
55218ca724SWolfgang Denkmaintainers.
56c609719bSwdenk
57c609719bSwdenk
58c609719bSwdenkWhere to get help:
59c609719bSwdenk==================
60c609719bSwdenk
61c609719bSwdenkIn case you have questions about, problems with or contributions for
62c609719bSwdenkU-Boot you should send a message to the U-Boot mailing list at
630c32565fSPeter Tyser<u-boot@lists.denx.de>. There is also an archive of previous traffic
640c32565fSPeter Tyseron the mailing list - please search the archive before asking FAQ's.
650c32565fSPeter TyserPlease see http://lists.denx.de/pipermail/u-boot and
660c32565fSPeter Tyserhttp://dir.gmane.org/gmane.comp.boot-loaders.u-boot
67c609719bSwdenk
68c609719bSwdenk
69218ca724SWolfgang DenkWhere to get source code:
70218ca724SWolfgang Denk=========================
71218ca724SWolfgang Denk
72218ca724SWolfgang DenkThe U-Boot source code is maintained in the git repository at
73218ca724SWolfgang Denkgit://www.denx.de/git/u-boot.git ; you can browse it online at
74218ca724SWolfgang Denkhttp://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=summary
75218ca724SWolfgang Denk
76218ca724SWolfgang DenkThe "snapshot" links on this page allow you to download tarballs of
7711ccc33fSMarcel Ziswilerany version you might be interested in. Official releases are also
78218ca724SWolfgang Denkavailable for FTP download from the ftp://ftp.denx.de/pub/u-boot/
79218ca724SWolfgang Denkdirectory.
80218ca724SWolfgang Denk
81d4ee711dSAnatolij GustschinPre-built (and tested) images are available from
82218ca724SWolfgang Denkftp://ftp.denx.de/pub/u-boot/images/
83218ca724SWolfgang Denk
84218ca724SWolfgang Denk
85c609719bSwdenkWhere we come from:
86c609719bSwdenk===================
87c609719bSwdenk
88c609719bSwdenk- start from 8xxrom sources
8924ee89b9Swdenk- create PPCBoot project (http://sourceforge.net/projects/ppcboot)
90c609719bSwdenk- clean up code
91c609719bSwdenk- make it easier to add custom boards
92c609719bSwdenk- make it possible to add other [PowerPC] CPUs
93c609719bSwdenk- extend functions, especially:
94c609719bSwdenk  * Provide extended interface to Linux boot loader
95c609719bSwdenk  * S-Record download
96c609719bSwdenk  * network boot
9711ccc33fSMarcel Ziswiler  * PCMCIA / CompactFlash / ATA disk / SCSI ... boot
9824ee89b9Swdenk- create ARMBoot project (http://sourceforge.net/projects/armboot)
99c609719bSwdenk- add other CPU families (starting with ARM)
10024ee89b9Swdenk- create U-Boot project (http://sourceforge.net/projects/u-boot)
1010d28f34bSMagnus Lilja- current project page: see http://www.denx.de/wiki/U-Boot
10224ee89b9Swdenk
10324ee89b9Swdenk
10424ee89b9SwdenkNames and Spelling:
10524ee89b9Swdenk===================
10624ee89b9Swdenk
10724ee89b9SwdenkThe "official" name of this project is "Das U-Boot". The spelling
10824ee89b9Swdenk"U-Boot" shall be used in all written text (documentation, comments
10924ee89b9Swdenkin source files etc.). Example:
11024ee89b9Swdenk
11124ee89b9Swdenk	This is the README file for the U-Boot project.
11224ee89b9Swdenk
11324ee89b9SwdenkFile names etc. shall be based on the string "u-boot". Examples:
11424ee89b9Swdenk
11524ee89b9Swdenk	include/asm-ppc/u-boot.h
11624ee89b9Swdenk
11724ee89b9Swdenk	#include <asm/u-boot.h>
11824ee89b9Swdenk
11924ee89b9SwdenkVariable names, preprocessor constants etc. shall be either based on
12024ee89b9Swdenkthe string "u_boot" or on "U_BOOT". Example:
12124ee89b9Swdenk
12224ee89b9Swdenk	U_BOOT_VERSION		u_boot_logo
12324ee89b9Swdenk	IH_OS_U_BOOT		u_boot_hush_start
124c609719bSwdenk
125c609719bSwdenk
12693f19cc0SwdenkVersioning:
12793f19cc0Swdenk===========
12893f19cc0Swdenk
129360d883aSThomas WeberStarting with the release in October 2008, the names of the releases
130360d883aSThomas Weberwere changed from numerical release numbers without deeper meaning
131360d883aSThomas Weberinto a time stamp based numbering. Regular releases are identified by
132360d883aSThomas Webernames consisting of the calendar year and month of the release date.
133360d883aSThomas WeberAdditional fields (if present) indicate release candidates or bug fix
134360d883aSThomas Weberreleases in "stable" maintenance trees.
13593f19cc0Swdenk
136360d883aSThomas WeberExamples:
137360d883aSThomas Weber	U-Boot v2009.11     - Release November 2009
138360d883aSThomas Weber	U-Boot v2009.11.1   - Release 1 in version November 2009 stable tree
139360d883aSThomas Weber	U-Boot v2010.09-rc1 - Release candiate 1 for September 2010 release
14093f19cc0Swdenk
14193f19cc0Swdenk
142c609719bSwdenkDirectory Hierarchy:
143c609719bSwdenk====================
144c609719bSwdenk
1458d321b81SPeter Tyser/arch			Architecture specific files
1468d321b81SPeter Tyser  /arm			Files generic to ARM architecture
1478d321b81SPeter Tyser    /cpu		CPU specific files
1488d321b81SPeter Tyser      /arm720t		Files specific to ARM 720 CPUs
1498d321b81SPeter Tyser      /arm920t		Files specific to ARM 920 CPUs
1508d321b81SPeter Tyser	/at91rm9200	Files specific to Atmel AT91RM9200 CPU
1518d321b81SPeter Tyser	/imx		Files specific to Freescale MC9328 i.MX CPUs
1528d321b81SPeter Tyser	/s3c24x0	Files specific to Samsung S3C24X0 CPUs
1538d321b81SPeter Tyser      /arm925t		Files specific to ARM 925 CPUs
1548d321b81SPeter Tyser      /arm926ejs	Files specific to ARM 926 CPUs
1558d321b81SPeter Tyser      /arm1136		Files specific to ARM 1136 CPUs
1568d321b81SPeter Tyser      /ixp		Files specific to Intel XScale IXP CPUs
1578d321b81SPeter Tyser      /pxa		Files specific to Intel XScale PXA CPUs
1588d321b81SPeter Tyser      /s3c44b0		Files specific to Samsung S3C44B0 CPUs
1598d321b81SPeter Tyser      /sa1100		Files specific to Intel StrongARM SA1100 CPUs
1608d321b81SPeter Tyser    /lib		Architecture specific library files
1618d321b81SPeter Tyser  /avr32		Files generic to AVR32 architecture
1628d321b81SPeter Tyser    /cpu		CPU specific files
1638d321b81SPeter Tyser    /lib		Architecture specific library files
1648d321b81SPeter Tyser  /blackfin		Files generic to Analog Devices Blackfin architecture
1658d321b81SPeter Tyser    /cpu		CPU specific files
1668d321b81SPeter Tyser    /lib		Architecture specific library files
167fea25720SGraeme Russ  /x86			Files generic to x86 architecture
1688d321b81SPeter Tyser    /cpu		CPU specific files
1698d321b81SPeter Tyser    /lib		Architecture specific library files
1708d321b81SPeter Tyser  /m68k			Files generic to m68k architecture
1718d321b81SPeter Tyser    /cpu		CPU specific files
1728d321b81SPeter Tyser      /mcf52x2		Files specific to Freescale ColdFire MCF52x2 CPUs
1738d321b81SPeter Tyser      /mcf5227x		Files specific to Freescale ColdFire MCF5227x CPUs
1748d321b81SPeter Tyser      /mcf532x		Files specific to Freescale ColdFire MCF5329 CPUs
1758d321b81SPeter Tyser      /mcf5445x		Files specific to Freescale ColdFire MCF5445x CPUs
1768d321b81SPeter Tyser      /mcf547x_8x	Files specific to Freescale ColdFire MCF547x_8x CPUs
1778d321b81SPeter Tyser    /lib		Architecture specific library files
1788d321b81SPeter Tyser  /microblaze		Files generic to microblaze architecture
1798d321b81SPeter Tyser    /cpu		CPU specific files
1808d321b81SPeter Tyser    /lib		Architecture specific library files
1818d321b81SPeter Tyser  /mips			Files generic to MIPS architecture
1828d321b81SPeter Tyser    /cpu		CPU specific files
1838d321b81SPeter Tyser    /lib		Architecture specific library files
1848d321b81SPeter Tyser  /nios2		Files generic to Altera NIOS2 architecture
1858d321b81SPeter Tyser    /cpu		CPU specific files
1868d321b81SPeter Tyser    /lib		Architecture specific library files
187a47a12beSStefan Roese  /powerpc		Files generic to PowerPC architecture
1888d321b81SPeter Tyser    /cpu		CPU specific files
1898d321b81SPeter Tyser      /74xx_7xx		Files specific to Freescale MPC74xx and 7xx CPUs
1908d321b81SPeter Tyser      /mpc5xx		Files specific to Freescale MPC5xx CPUs
1918d321b81SPeter Tyser      /mpc5xxx		Files specific to Freescale MPC5xxx CPUs
1928d321b81SPeter Tyser      /mpc8xx		Files specific to Freescale MPC8xx CPUs
1938d321b81SPeter Tyser      /mpc8220		Files specific to Freescale MPC8220 CPUs
1948d321b81SPeter Tyser      /mpc824x		Files specific to Freescale MPC824x CPUs
1958d321b81SPeter Tyser      /mpc8260		Files specific to Freescale MPC8260 CPUs
1968d321b81SPeter Tyser      /mpc85xx		Files specific to Freescale MPC85xx CPUs
1978d321b81SPeter Tyser      /ppc4xx		Files specific to AMCC PowerPC 4xx CPUs
1988d321b81SPeter Tyser    /lib		Architecture specific library files
1998d321b81SPeter Tyser  /sh			Files generic to SH architecture
2008d321b81SPeter Tyser    /cpu		CPU specific files
2018d321b81SPeter Tyser      /sh2		Files specific to sh2 CPUs
2028d321b81SPeter Tyser      /sh3		Files specific to sh3 CPUs
2038d321b81SPeter Tyser      /sh4		Files specific to sh4 CPUs
2048d321b81SPeter Tyser    /lib		Architecture specific library files
2058d321b81SPeter Tyser  /sparc		Files generic to SPARC architecture
2068d321b81SPeter Tyser    /cpu		CPU specific files
2078d321b81SPeter Tyser      /leon2		Files specific to Gaisler LEON2 SPARC CPU
2088d321b81SPeter Tyser      /leon3		Files specific to Gaisler LEON3 SPARC CPU
2098d321b81SPeter Tyser    /lib		Architecture specific library files
2108d321b81SPeter Tyser/api			Machine/arch independent API for external apps
2118d321b81SPeter Tyser/board			Board dependent files
2128d321b81SPeter Tyser/common			Misc architecture independent functions
2138d321b81SPeter Tyser/disk			Code for disk drive partition handling
2148d321b81SPeter Tyser/doc			Documentation (don't expect too much)
2158d321b81SPeter Tyser/drivers		Commonly used device drivers
2168d321b81SPeter Tyser/examples		Example code for standalone applications, etc.
2178d321b81SPeter Tyser/fs			Filesystem code (cramfs, ext2, jffs2, etc.)
2188d321b81SPeter Tyser/include		Header Files
2198d321b81SPeter Tyser/lib			Files generic to all architectures
2208d321b81SPeter Tyser  /libfdt		Library files to support flattened device trees
2218d321b81SPeter Tyser  /lzma			Library files to support LZMA decompression
2228d321b81SPeter Tyser  /lzo			Library files to support LZO decompression
2238d321b81SPeter Tyser/net			Networking code
2248d321b81SPeter Tyser/post			Power On Self Test
2258d321b81SPeter Tyser/rtc			Real Time Clock drivers
2268d321b81SPeter Tyser/tools			Tools to build S-Record or U-Boot images, etc.
227c609719bSwdenk
228c609719bSwdenkSoftware Configuration:
229c609719bSwdenk=======================
230c609719bSwdenk
231c609719bSwdenkConfiguration is usually done using C preprocessor defines; the
232c609719bSwdenkrationale behind that is to avoid dead code whenever possible.
233c609719bSwdenk
234c609719bSwdenkThere are two classes of configuration variables:
235c609719bSwdenk
236c609719bSwdenk* Configuration _OPTIONS_:
237c609719bSwdenk  These are selectable by the user and have names beginning with
238c609719bSwdenk  "CONFIG_".
239c609719bSwdenk
240c609719bSwdenk* Configuration _SETTINGS_:
241c609719bSwdenk  These depend on the hardware etc. and should not be meddled with if
242c609719bSwdenk  you don't know what you're doing; they have names beginning with
2436d0f6bcfSJean-Christophe PLAGNIOL-VILLARD  "CONFIG_SYS_".
244c609719bSwdenk
245c609719bSwdenkLater we will add a configuration tool - probably similar to or even
246c609719bSwdenkidentical to what's used for the Linux kernel. Right now, we have to
247c609719bSwdenkdo the configuration by hand, which means creating some symbolic
248c609719bSwdenklinks and editing some configuration files. We use the TQM8xxL boards
249c609719bSwdenkas an example here.
250c609719bSwdenk
251c609719bSwdenk
252c609719bSwdenkSelection of Processor Architecture and Board Type:
253c609719bSwdenk---------------------------------------------------
254c609719bSwdenk
255c609719bSwdenkFor all supported boards there are ready-to-use default
256c609719bSwdenkconfigurations available; just type "make <board_name>_config".
257c609719bSwdenk
258c609719bSwdenkExample: For a TQM823L module type:
259c609719bSwdenk
260c609719bSwdenk	cd u-boot
261c609719bSwdenk	make TQM823L_config
262c609719bSwdenk
26311ccc33fSMarcel ZiswilerFor the Cogent platform, you need to specify the CPU type as well;
264c609719bSwdenke.g. "make cogent_mpc8xx_config". And also configure the cogent
265c609719bSwdenkdirectory according to the instructions in cogent/README.
266c609719bSwdenk
267c609719bSwdenk
268c609719bSwdenkConfiguration Options:
269c609719bSwdenk----------------------
270c609719bSwdenk
271c609719bSwdenkConfiguration depends on the combination of board and CPU type; all
272c609719bSwdenksuch information is kept in a configuration file
273c609719bSwdenk"include/configs/<board_name>.h".
274c609719bSwdenk
275c609719bSwdenkExample: For a TQM823L module, all configuration settings are in
276c609719bSwdenk"include/configs/TQM823L.h".
277c609719bSwdenk
278c609719bSwdenk
2797f6c2cbcSwdenkMany of the options are named exactly as the corresponding Linux
2807f6c2cbcSwdenkkernel configuration options. The intention is to make it easier to
2817f6c2cbcSwdenkbuild a config tool - later.
2827f6c2cbcSwdenk
2837f6c2cbcSwdenk
284c609719bSwdenkThe following options need to be configured:
285c609719bSwdenk
2862628114eSKim Phillips- CPU Type:	Define exactly one, e.g. CONFIG_MPC85XX.
287c609719bSwdenk
2882628114eSKim Phillips- Board Type:	Define exactly one, e.g. CONFIG_MPC8540ADS.
2896ccec449SWolfgang Denk
2906ccec449SWolfgang Denk- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined)
29109ea0de0SHaavard Skinnemoen		Define exactly one, e.g. CONFIG_ATSTK1002
292c609719bSwdenk
293c609719bSwdenk- CPU Module Type: (if CONFIG_COGENT is defined)
294c609719bSwdenk		Define exactly one of
295c609719bSwdenk		CONFIG_CMA286_60_OLD
296c609719bSwdenk--- FIXME --- not tested yet:
297c609719bSwdenk		CONFIG_CMA286_60, CONFIG_CMA286_21, CONFIG_CMA286_60P,
298c609719bSwdenk		CONFIG_CMA287_23, CONFIG_CMA287_50
299c609719bSwdenk
300c609719bSwdenk- Motherboard Type: (if CONFIG_COGENT is defined)
301c609719bSwdenk		Define exactly one of
302c609719bSwdenk		CONFIG_CMA101, CONFIG_CMA102
303c609719bSwdenk
304c609719bSwdenk- Motherboard I/O Modules: (if CONFIG_COGENT is defined)
305c609719bSwdenk		Define one or more of
306c609719bSwdenk		CONFIG_CMA302
307c609719bSwdenk
308c609719bSwdenk- Motherboard Options: (if CONFIG_CMA101 or CONFIG_CMA102 are defined)
309c609719bSwdenk		Define one or more of
310c609719bSwdenk		CONFIG_LCD_HEARTBEAT	- update a character position on
31111ccc33fSMarcel Ziswiler					  the LCD display every second with
312c609719bSwdenk					  a "rotator" |\-/|\-/
313c609719bSwdenk
3142535d602Swdenk- Board flavour: (if CONFIG_MPC8260ADS is defined)
3152535d602Swdenk		CONFIG_ADSTYPE
3162535d602Swdenk		Possible values are:
3176d0f6bcfSJean-Christophe PLAGNIOL-VILLARD			CONFIG_SYS_8260ADS	- original MPC8260ADS
3186d0f6bcfSJean-Christophe PLAGNIOL-VILLARD			CONFIG_SYS_8266ADS	- MPC8266ADS
3196d0f6bcfSJean-Christophe PLAGNIOL-VILLARD			CONFIG_SYS_PQ2FADS	- PQ2FADS-ZU or PQ2FADS-VR
3206d0f6bcfSJean-Christophe PLAGNIOL-VILLARD			CONFIG_SYS_8272ADS	- MPC8272ADS
3212535d602Swdenk
322cf946c6dSLei Wen- Marvell Family Member
323cf946c6dSLei Wen		CONFIG_SYS_MVFS		- define it if you want to enable
324cf946c6dSLei Wen					  multiple fs option at one time
325cf946c6dSLei Wen					  for marvell soc family
326cf946c6dSLei Wen
327c609719bSwdenk- MPC824X Family Member (if CONFIG_MPC824X is defined)
328c609719bSwdenk		Define exactly one of
329c609719bSwdenk		CONFIG_MPC8240, CONFIG_MPC8245
330c609719bSwdenk
33111ccc33fSMarcel Ziswiler- 8xx CPU Options: (if using an MPC8xx CPU)
33266ca92a5Swdenk		CONFIG_8xx_GCLK_FREQ	- deprecated: CPU clock if
33366ca92a5Swdenk					  get_gclk_freq() cannot work
3345da627a4Swdenk					  e.g. if there is no 32KHz
3355da627a4Swdenk					  reference PIT/RTC clock
33666ca92a5Swdenk		CONFIG_8xx_OSCLK	- PLL input clock (either EXTCLK
33766ca92a5Swdenk					  or XTAL/EXTAL)
338c609719bSwdenk
33966ca92a5Swdenk- 859/866/885 CPU options: (if using a MPC859 or MPC866 or MPC885 CPU):
3406d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_8xx_CPUCLK_MIN
3416d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_8xx_CPUCLK_MAX
34266ca92a5Swdenk		CONFIG_8xx_CPUCLK_DEFAULT
34375d1ea7fSwdenk			See doc/README.MPC866
34475d1ea7fSwdenk
3456d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_MEASURE_CPUCLK
34675d1ea7fSwdenk
34775d1ea7fSwdenk		Define this to measure the actual CPU clock instead
34875d1ea7fSwdenk		of relying on the correctness of the configured
34975d1ea7fSwdenk		values. Mostly useful for board bringup to make sure
35075d1ea7fSwdenk		the PLL is locked at the intended frequency. Note
35175d1ea7fSwdenk		that this requires a (stable) reference clock (32 kHz
3526d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		RTC clock or CONFIG_SYS_8XX_XIN)
35375d1ea7fSwdenk
354506f3918SHeiko Schocher		CONFIG_SYS_DELAYED_ICACHE
355506f3918SHeiko Schocher
356506f3918SHeiko Schocher		Define this option if you want to enable the
357506f3918SHeiko Schocher		ICache only when Code runs from RAM.
358506f3918SHeiko Schocher
3590b953ffcSMarkus Klotzbuecher- Intel Monahans options:
3606d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO
3610b953ffcSMarkus Klotzbuecher
3620b953ffcSMarkus Klotzbuecher		Defines the Monahans run mode to oscillator
3630b953ffcSMarkus Klotzbuecher		ratio. Valid values are 8, 16, 24, 31. The core
3640b953ffcSMarkus Klotzbuecher		frequency is this value multiplied by 13 MHz.
3650b953ffcSMarkus Klotzbuecher
3666d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO
3670b953ffcSMarkus Klotzbuecher
3680b953ffcSMarkus Klotzbuecher		Defines the Monahans turbo mode to oscillator
3690b953ffcSMarkus Klotzbuecher		ratio. Valid values are 1 (default if undefined) and
3700b953ffcSMarkus Klotzbuecher		2. The core frequency as calculated above is multiplied
3710b953ffcSMarkus Klotzbuecher		by this value.
3720b953ffcSMarkus Klotzbuecher
3735da627a4Swdenk- Linux Kernel Interface:
374c609719bSwdenk		CONFIG_CLOCKS_IN_MHZ
375c609719bSwdenk
376c609719bSwdenk		U-Boot stores all clock information in Hz
377c609719bSwdenk		internally. For binary compatibility with older Linux
378c609719bSwdenk		kernels (which expect the clocks passed in the
379c609719bSwdenk		bd_info data to be in MHz) the environment variable
380c609719bSwdenk		"clocks_in_mhz" can be defined so that U-Boot
381c609719bSwdenk		converts clock data to MHZ before passing it to the
382c609719bSwdenk		Linux kernel.
383c609719bSwdenk		When CONFIG_CLOCKS_IN_MHZ is defined, a definition of
384c609719bSwdenk		"clocks_in_mhz=1" is automatically included in the
385c609719bSwdenk		default environment.
386c609719bSwdenk
3875da627a4Swdenk		CONFIG_MEMSIZE_IN_BYTES		[relevant for MIPS only]
3885da627a4Swdenk
38911ccc33fSMarcel Ziswiler		When transferring memsize parameter to linux, some versions
3905da627a4Swdenk		expect it to be in bytes, others in MB.
3915da627a4Swdenk		Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes.
3925da627a4Swdenk
393fec6d9eeSGerald Van Baren		CONFIG_OF_LIBFDT
394f57f70aaSWolfgang Denk
395f57f70aaSWolfgang Denk		New kernel versions are expecting firmware settings to be
396213bf8c8SGerald Van Baren		passed using flattened device trees (based on open firmware
397213bf8c8SGerald Van Baren		concepts).
398213bf8c8SGerald Van Baren
399213bf8c8SGerald Van Baren		CONFIG_OF_LIBFDT
400213bf8c8SGerald Van Baren		 * New libfdt-based support
401213bf8c8SGerald Van Baren		 * Adds the "fdt" command
4023bb342fcSKim Phillips		 * The bootm command automatically updates the fdt
403213bf8c8SGerald Van Baren
404b55ae402SMarcel Ziswiler		OF_CPU - The proper name of the cpus node (only required for
405b55ae402SMarcel Ziswiler			MPC512X and MPC5xxx based boards).
406b55ae402SMarcel Ziswiler		OF_SOC - The proper name of the soc node (only required for
407b55ae402SMarcel Ziswiler			MPC512X and MPC5xxx based boards).
408f57f70aaSWolfgang Denk		OF_TBCLK - The timebase frequency.
409c2871f03SKumar Gala		OF_STDOUT_PATH - The path to the console device
410f57f70aaSWolfgang Denk
41111ccc33fSMarcel Ziswiler		boards with QUICC Engines require OF_QE to set UCC MAC
41211ccc33fSMarcel Ziswiler		addresses
4133bb342fcSKim Phillips
4144e253137SKumar Gala		CONFIG_OF_BOARD_SETUP
4154e253137SKumar Gala
4164e253137SKumar Gala		Board code has addition modification that it wants to make
4174e253137SKumar Gala		to the flat device tree before handing it off to the kernel
4186705d81eSwdenk
4190267768eSMatthew McClintock		CONFIG_OF_BOOT_CPU
4200267768eSMatthew McClintock
42111ccc33fSMarcel Ziswiler		This define fills in the correct boot CPU in the boot
4220267768eSMatthew McClintock		param header, the default value is zero if undefined.
4230267768eSMatthew McClintock
4243887c3fbSHeiko Schocher		CONFIG_OF_IDE_FIXUP
4253887c3fbSHeiko Schocher
4263887c3fbSHeiko Schocher		U-Boot can detect if an IDE device is present or not.
4273887c3fbSHeiko Schocher		If not, and this new config option is activated, U-Boot
4283887c3fbSHeiko Schocher		removes the ATA node from the DTS before booting Linux,
4293887c3fbSHeiko Schocher		so the Linux IDE driver does not probe the device and
4303887c3fbSHeiko Schocher		crash. This is needed for buggy hardware (uc101) where
4313887c3fbSHeiko Schocher		no pull down resistor is connected to the signal IDE5V_DD7.
4323887c3fbSHeiko Schocher
4330b2f4ecaSNiklaus Giger- vxWorks boot parameters:
4340b2f4ecaSNiklaus Giger
4350b2f4ecaSNiklaus Giger		bootvx constructs a valid bootline using the following
4360b2f4ecaSNiklaus Giger		environments variables: bootfile, ipaddr, serverip, hostname.
4370b2f4ecaSNiklaus Giger		It loads the vxWorks image pointed bootfile.
4380b2f4ecaSNiklaus Giger
4390b2f4ecaSNiklaus Giger		CONFIG_SYS_VXWORKS_BOOT_DEVICE - The vxworks device name
4400b2f4ecaSNiklaus Giger		CONFIG_SYS_VXWORKS_MAC_PTR - Ethernet 6 byte MA -address
4410b2f4ecaSNiklaus Giger		CONFIG_SYS_VXWORKS_SERVERNAME - Name of the server
4420b2f4ecaSNiklaus Giger		CONFIG_SYS_VXWORKS_BOOT_ADDR - Address of boot parameters
4430b2f4ecaSNiklaus Giger
4440b2f4ecaSNiklaus Giger		CONFIG_SYS_VXWORKS_ADD_PARAMS
4450b2f4ecaSNiklaus Giger
4460b2f4ecaSNiklaus Giger		Add it at the end of the bootline. E.g "u=username pw=secret"
4470b2f4ecaSNiklaus Giger
4480b2f4ecaSNiklaus Giger		Note: If a "bootargs" environment is defined, it will overwride
4490b2f4ecaSNiklaus Giger		the defaults discussed just above.
4500b2f4ecaSNiklaus Giger
4516705d81eSwdenk- Serial Ports:
45248d0192fSAndreas Engel		CONFIG_PL010_SERIAL
4536705d81eSwdenk
4546705d81eSwdenk		Define this if you want support for Amba PrimeCell PL010 UARTs.
4556705d81eSwdenk
45648d0192fSAndreas Engel		CONFIG_PL011_SERIAL
4576705d81eSwdenk
4586705d81eSwdenk		Define this if you want support for Amba PrimeCell PL011 UARTs.
4596705d81eSwdenk
4606705d81eSwdenk		CONFIG_PL011_CLOCK
4616705d81eSwdenk
4626705d81eSwdenk		If you have Amba PrimeCell PL011 UARTs, set this variable to
4636705d81eSwdenk		the clock speed of the UARTs.
4646705d81eSwdenk
4656705d81eSwdenk		CONFIG_PL01x_PORTS
4666705d81eSwdenk
4676705d81eSwdenk		If you have Amba PrimeCell PL010 or PL011 UARTs on your board,
4686705d81eSwdenk		define this to a list of base addresses for each (supported)
4696705d81eSwdenk		port. See e.g. include/configs/versatile.h
4706705d81eSwdenk
4716705d81eSwdenk
472c609719bSwdenk- Console Interface:
473c609719bSwdenk		Depending on board, define exactly one serial port
474c609719bSwdenk		(like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2,
475c609719bSwdenk		CONFIG_8xx_CONS_SCC1, ...), or switch off the serial
476c609719bSwdenk		console by defining CONFIG_8xx_CONS_NONE
477c609719bSwdenk
478c609719bSwdenk		Note: if CONFIG_8xx_CONS_NONE is defined, the serial
479c609719bSwdenk		port routines must be defined elsewhere
480c609719bSwdenk		(i.e. serial_init(), serial_getc(), ...)
481c609719bSwdenk
482c609719bSwdenk		CONFIG_CFB_CONSOLE
483c609719bSwdenk		Enables console device for a color framebuffer. Needs following
484c609719bSwdenk		defines (cf. smiLynxEM, i8042, board/eltec/bab7xx)
485c609719bSwdenk			VIDEO_FB_LITTLE_ENDIAN	graphic memory organisation
486c609719bSwdenk						(default big endian)
487c609719bSwdenk			VIDEO_HW_RECTFILL	graphic chip supports
488c609719bSwdenk						rectangle fill
489c609719bSwdenk						(cf. smiLynxEM)
490c609719bSwdenk			VIDEO_HW_BITBLT		graphic chip supports
491c609719bSwdenk						bit-blit (cf. smiLynxEM)
492c609719bSwdenk			VIDEO_VISIBLE_COLS	visible pixel columns
493c609719bSwdenk						(cols=pitch)
494c609719bSwdenk			VIDEO_VISIBLE_ROWS	visible pixel rows
495c609719bSwdenk			VIDEO_PIXEL_SIZE	bytes per pixel
496c609719bSwdenk			VIDEO_DATA_FORMAT	graphic data format
497c609719bSwdenk						(0-5, cf. cfb_console.c)
498c609719bSwdenk			VIDEO_FB_ADRS		framebuffer address
499c609719bSwdenk			VIDEO_KBD_INIT_FCT	keyboard int fct
500c609719bSwdenk						(i.e. i8042_kbd_init())
501c609719bSwdenk			VIDEO_TSTC_FCT		test char fct
502c609719bSwdenk						(i.e. i8042_tstc)
503c609719bSwdenk			VIDEO_GETC_FCT		get char fct
504c609719bSwdenk						(i.e. i8042_getc)
505c609719bSwdenk			CONFIG_CONSOLE_CURSOR	cursor drawing on/off
506c609719bSwdenk						(requires blink timer
507c609719bSwdenk						cf. i8042.c)
5086d0f6bcfSJean-Christophe PLAGNIOL-VILLARD			CONFIG_SYS_CONSOLE_BLINK_COUNT blink interval (cf. i8042.c)
509c609719bSwdenk			CONFIG_CONSOLE_TIME	display time/date info in
510c609719bSwdenk						upper right corner
511602ad3b3SJon Loeliger						(requires CONFIG_CMD_DATE)
512c609719bSwdenk			CONFIG_VIDEO_LOGO	display Linux logo in
513c609719bSwdenk						upper left corner
514a6c7ad2fSwdenk			CONFIG_VIDEO_BMP_LOGO	use bmp_logo.h instead of
515a6c7ad2fSwdenk						linux_logo.h for logo.
516a6c7ad2fSwdenk						Requires CONFIG_VIDEO_LOGO
517c609719bSwdenk			CONFIG_CONSOLE_EXTRA_INFO
51811ccc33fSMarcel Ziswiler						additional board info beside
519c609719bSwdenk						the logo
520c609719bSwdenk
521c609719bSwdenk		When CONFIG_CFB_CONSOLE is defined, video console is
522c609719bSwdenk		default i/o. Serial console can be forced with
523c609719bSwdenk		environment 'console=serial'.
524c609719bSwdenk
525a3ad8e26Swdenk		When CONFIG_SILENT_CONSOLE is defined, all console
526a3ad8e26Swdenk		messages (by U-Boot and Linux!) can be silenced with
527a3ad8e26Swdenk		the "silent" environment variable. See
528a3ad8e26Swdenk		doc/README.silent for more information.
529a3ad8e26Swdenk
530c609719bSwdenk- Console Baudrate:
531c609719bSwdenk		CONFIG_BAUDRATE - in bps
532c609719bSwdenk		Select one of the baudrates listed in
5336d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_BAUDRATE_TABLE, see below.
5346d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_BRGCLK_PRESCALE, baudrate prescale
535c609719bSwdenk
536c92fac91SHeiko Schocher- Console Rx buffer length
537c92fac91SHeiko Schocher		With CONFIG_SYS_SMC_RXBUFLEN it is possible to define
538c92fac91SHeiko Schocher		the maximum receive buffer length for the SMC.
5392b3f12c2SHeiko Schocher		This option is actual only for 82xx and 8xx possible.
540c92fac91SHeiko Schocher		If using CONFIG_SYS_SMC_RXBUFLEN also CONFIG_SYS_MAXIDLE
541c92fac91SHeiko Schocher		must be defined, to setup the maximum idle timeout for
542c92fac91SHeiko Schocher		the SMC.
543c92fac91SHeiko Schocher
544c609719bSwdenk- Boot Delay:	CONFIG_BOOTDELAY - in seconds
545c609719bSwdenk		Delay before automatically booting the default image;
546c609719bSwdenk		set to -1 to disable autoboot.
547c609719bSwdenk
548c609719bSwdenk		See doc/README.autoboot for these options that
549c609719bSwdenk		work with CONFIG_BOOTDELAY. None are required.
550c609719bSwdenk		CONFIG_BOOT_RETRY_TIME
551c609719bSwdenk		CONFIG_BOOT_RETRY_MIN
552c609719bSwdenk		CONFIG_AUTOBOOT_KEYED
553c609719bSwdenk		CONFIG_AUTOBOOT_PROMPT
554c609719bSwdenk		CONFIG_AUTOBOOT_DELAY_STR
555c609719bSwdenk		CONFIG_AUTOBOOT_STOP_STR
556c609719bSwdenk		CONFIG_AUTOBOOT_DELAY_STR2
557c609719bSwdenk		CONFIG_AUTOBOOT_STOP_STR2
558c609719bSwdenk		CONFIG_ZERO_BOOTDELAY_CHECK
559c609719bSwdenk		CONFIG_RESET_TO_RETRY
560c609719bSwdenk
561c609719bSwdenk- Autoboot Command:
562c609719bSwdenk		CONFIG_BOOTCOMMAND
563c609719bSwdenk		Only needed when CONFIG_BOOTDELAY is enabled;
564c609719bSwdenk		define a command string that is automatically executed
565c609719bSwdenk		when no character is read on the console interface
566c609719bSwdenk		within "Boot Delay" after reset.
567c609719bSwdenk
568c609719bSwdenk		CONFIG_BOOTARGS
569c609719bSwdenk		This can be used to pass arguments to the bootm
570c609719bSwdenk		command. The value of CONFIG_BOOTARGS goes into the
571c609719bSwdenk		environment value "bootargs".
572c609719bSwdenk
573c609719bSwdenk		CONFIG_RAMBOOT and CONFIG_NFSBOOT
574c609719bSwdenk		The value of these goes into the environment as
575c609719bSwdenk		"ramboot" and "nfsboot" respectively, and can be used
576c609719bSwdenk		as a convenience, when switching between booting from
57711ccc33fSMarcel Ziswiler		RAM and NFS.
578c609719bSwdenk
579c609719bSwdenk- Pre-Boot Commands:
580c609719bSwdenk		CONFIG_PREBOOT
581c609719bSwdenk
582c609719bSwdenk		When this option is #defined, the existence of the
583c609719bSwdenk		environment variable "preboot" will be checked
584c609719bSwdenk		immediately before starting the CONFIG_BOOTDELAY
585c609719bSwdenk		countdown and/or running the auto-boot command resp.
586c609719bSwdenk		entering interactive mode.
587c609719bSwdenk
588c609719bSwdenk		This feature is especially useful when "preboot" is
589c609719bSwdenk		automatically generated or modified. For an example
590c609719bSwdenk		see the LWMON board specific code: here "preboot" is
591c609719bSwdenk		modified when the user holds down a certain
592c609719bSwdenk		combination of keys on the (special) keyboard when
593c609719bSwdenk		booting the systems
594c609719bSwdenk
595c609719bSwdenk- Serial Download Echo Mode:
596c609719bSwdenk		CONFIG_LOADS_ECHO
597c609719bSwdenk		If defined to 1, all characters received during a
598c609719bSwdenk		serial download (using the "loads" command) are
599c609719bSwdenk		echoed back. This might be needed by some terminal
600c609719bSwdenk		emulations (like "cu"), but may as well just take
601c609719bSwdenk		time on others. This setting #define's the initial
602c609719bSwdenk		value of the "loads_echo" environment variable.
603c609719bSwdenk
604602ad3b3SJon Loeliger- Kgdb Serial Baudrate: (if CONFIG_CMD_KGDB is defined)
605c609719bSwdenk		CONFIG_KGDB_BAUDRATE
606c609719bSwdenk		Select one of the baudrates listed in
6076d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_BAUDRATE_TABLE, see below.
608c609719bSwdenk
609c609719bSwdenk- Monitor Functions:
610602ad3b3SJon Loeliger		Monitor commands can be included or excluded
611602ad3b3SJon Loeliger		from the build by using the #include files
612602ad3b3SJon Loeliger		"config_cmd_all.h" and #undef'ing unwanted
613602ad3b3SJon Loeliger		commands, or using "config_cmd_default.h"
614602ad3b3SJon Loeliger		and augmenting with additional #define's
615602ad3b3SJon Loeliger		for wanted commands.
616c609719bSwdenk
617602ad3b3SJon Loeliger		The default command configuration includes all commands
618602ad3b3SJon Loeliger		except those marked below with a "*".
619602ad3b3SJon Loeliger
620602ad3b3SJon Loeliger		CONFIG_CMD_ASKENV	* ask for env variable
621602ad3b3SJon Loeliger		CONFIG_CMD_BDI		  bdinfo
622602ad3b3SJon Loeliger		CONFIG_CMD_BEDBUG	* Include BedBug Debugger
623602ad3b3SJon Loeliger		CONFIG_CMD_BMP		* BMP support
624602ad3b3SJon Loeliger		CONFIG_CMD_BSP		* Board specific commands
625602ad3b3SJon Loeliger		CONFIG_CMD_BOOTD	  bootd
626602ad3b3SJon Loeliger		CONFIG_CMD_CACHE	* icache, dcache
627602ad3b3SJon Loeliger		CONFIG_CMD_CONSOLE	  coninfo
628710b9938SMike Frysinger		CONFIG_CMD_CRC32	* crc32
629602ad3b3SJon Loeliger		CONFIG_CMD_DATE		* support for RTC, date/time...
630602ad3b3SJon Loeliger		CONFIG_CMD_DHCP		* DHCP support
631602ad3b3SJon Loeliger		CONFIG_CMD_DIAG		* Diagnostics
632a7c93104SPeter Tyser		CONFIG_CMD_DS4510	* ds4510 I2C gpio commands
633a7c93104SPeter Tyser		CONFIG_CMD_DS4510_INFO	* ds4510 I2C info command
634a7c93104SPeter Tyser		CONFIG_CMD_DS4510_MEM	* ds4510 I2C eeprom/sram commansd
635a7c93104SPeter Tyser		CONFIG_CMD_DS4510_RST	* ds4510 I2C rst command
636602ad3b3SJon Loeliger		CONFIG_CMD_DTT		* Digital Therm and Thermostat
637602ad3b3SJon Loeliger		CONFIG_CMD_ECHO		  echo arguments
638246c6922SPeter Tyser		CONFIG_CMD_EDITENV	  edit env variable
639602ad3b3SJon Loeliger		CONFIG_CMD_EEPROM	* EEPROM read/write support
640602ad3b3SJon Loeliger		CONFIG_CMD_ELF		* bootelf, bootvx
6410c79cda0SMike Frysinger		CONFIG_CMD_EXPORTENV	* export the environment
642bdab39d3SMike Frysinger		CONFIG_CMD_SAVEENV	  saveenv
643602ad3b3SJon Loeliger		CONFIG_CMD_FDC		* Floppy Disk Support
644602ad3b3SJon Loeliger		CONFIG_CMD_FAT		* FAT partition support
645602ad3b3SJon Loeliger		CONFIG_CMD_FDOS		* Dos diskette Support
646602ad3b3SJon Loeliger		CONFIG_CMD_FLASH	  flinfo, erase, protect
647602ad3b3SJon Loeliger		CONFIG_CMD_FPGA		  FPGA device initialization support
648a641b979SMike Frysinger		CONFIG_CMD_GO		* the 'go' command (exec code)
649a000b795SKim Phillips		CONFIG_CMD_GREPENV	* search environment
650602ad3b3SJon Loeliger		CONFIG_CMD_HWFLOW	* RTS/CTS hw flow control
651602ad3b3SJon Loeliger		CONFIG_CMD_I2C		* I2C serial bus support
652602ad3b3SJon Loeliger		CONFIG_CMD_IDE		* IDE harddisk support
653602ad3b3SJon Loeliger		CONFIG_CMD_IMI		  iminfo
654602ad3b3SJon Loeliger		CONFIG_CMD_IMLS		  List all found images
655602ad3b3SJon Loeliger		CONFIG_CMD_IMMAP	* IMMR dump support
6560c79cda0SMike Frysinger		CONFIG_CMD_IMPORTENV	* import an environment
657602ad3b3SJon Loeliger		CONFIG_CMD_IRQ		* irqinfo
658602ad3b3SJon Loeliger		CONFIG_CMD_ITEST	  Integer/string test of 2 values
659602ad3b3SJon Loeliger		CONFIG_CMD_JFFS2	* JFFS2 Support
660602ad3b3SJon Loeliger		CONFIG_CMD_KGDB		* kgdb
6611ba7fd25SMike Frysinger		CONFIG_CMD_LDRINFO	  ldrinfo (display Blackfin loader)
662602ad3b3SJon Loeliger		CONFIG_CMD_LOADB	  loadb
663602ad3b3SJon Loeliger		CONFIG_CMD_LOADS	  loads
66402c9aa1dSRobin Getz		CONFIG_CMD_MD5SUM	  print md5 message digest
66502c9aa1dSRobin Getz					  (requires CONFIG_CMD_MEMORY and CONFIG_MD5)
666602ad3b3SJon Loeliger		CONFIG_CMD_MEMORY	  md, mm, nm, mw, cp, cmp, crc, base,
66756523f12Swdenk					  loop, loopw, mtest
668602ad3b3SJon Loeliger		CONFIG_CMD_MISC		  Misc functions like sleep etc
669602ad3b3SJon Loeliger		CONFIG_CMD_MMC		* MMC memory mapped support
670602ad3b3SJon Loeliger		CONFIG_CMD_MII		* MII utility commands
67168d7d651SStefan Roese		CONFIG_CMD_MTDPARTS	* MTD partition support
672602ad3b3SJon Loeliger		CONFIG_CMD_NAND		* NAND support
673602ad3b3SJon Loeliger		CONFIG_CMD_NET		  bootp, tftpboot, rarpboot
674e92739d3SPeter Tyser		CONFIG_CMD_PCA953X	* PCA953x I2C gpio commands
675e92739d3SPeter Tyser		CONFIG_CMD_PCA953X_INFO	* PCA953x I2C gpio info command
676602ad3b3SJon Loeliger		CONFIG_CMD_PCI		* pciinfo
677602ad3b3SJon Loeliger		CONFIG_CMD_PCMCIA		* PCMCIA support
678602ad3b3SJon Loeliger		CONFIG_CMD_PING		* send ICMP ECHO_REQUEST to network
679602ad3b3SJon Loeliger					  host
680602ad3b3SJon Loeliger		CONFIG_CMD_PORTIO	* Port I/O
681602ad3b3SJon Loeliger		CONFIG_CMD_REGINFO	* Register dump
682602ad3b3SJon Loeliger		CONFIG_CMD_RUN		  run command in env variable
683602ad3b3SJon Loeliger		CONFIG_CMD_SAVES	* save S record dump
684602ad3b3SJon Loeliger		CONFIG_CMD_SCSI		* SCSI Support
685602ad3b3SJon Loeliger		CONFIG_CMD_SDRAM	* print SDRAM configuration information
686602ad3b3SJon Loeliger					  (requires CONFIG_CMD_I2C)
687602ad3b3SJon Loeliger		CONFIG_CMD_SETGETDCR	  Support for DCR Register access
688602ad3b3SJon Loeliger					  (4xx only)
689c6b1ee66SAlexander Holler		CONFIG_CMD_SHA1SUM	  print sha1 memory digest
69002c9aa1dSRobin Getz					  (requires CONFIG_CMD_MEMORY)
69174de7aefSWolfgang Denk		CONFIG_CMD_SOURCE	  "source" command Support
692602ad3b3SJon Loeliger		CONFIG_CMD_SPI		* SPI serial bus support
693602ad3b3SJon Loeliger		CONFIG_CMD_USB		* USB support
694602ad3b3SJon Loeliger		CONFIG_CMD_VFD		* VFD support (TRAB)
695602ad3b3SJon Loeliger		CONFIG_CMD_CDP		* Cisco Discover Protocol support
696602ad3b3SJon Loeliger		CONFIG_CMD_FSL		* Microblaze FSL support
697c609719bSwdenk
698c609719bSwdenk
699c609719bSwdenk		EXAMPLE: If you want all functions except of network
700c609719bSwdenk		support you can write:
701c609719bSwdenk
702602ad3b3SJon Loeliger		#include "config_cmd_all.h"
703602ad3b3SJon Loeliger		#undef CONFIG_CMD_NET
704c609719bSwdenk
705213bf8c8SGerald Van Baren	Other Commands:
706213bf8c8SGerald Van Baren		fdt (flattened device tree) command: CONFIG_OF_LIBFDT
707c609719bSwdenk
708c609719bSwdenk	Note:	Don't enable the "icache" and "dcache" commands
709602ad3b3SJon Loeliger		(configuration option CONFIG_CMD_CACHE) unless you know
710c609719bSwdenk		what you (and your U-Boot users) are doing. Data
711c609719bSwdenk		cache cannot be enabled on systems like the 8xx or
712c609719bSwdenk		8260 (where accesses to the IMMR region must be
713c609719bSwdenk		uncached), and it cannot be disabled on all other
714c609719bSwdenk		systems where we (mis-) use the data cache to hold an
715c609719bSwdenk		initial stack and some data.
716c609719bSwdenk
717c609719bSwdenk
718c609719bSwdenk		XXX - this list needs to get updated!
719c609719bSwdenk
720c609719bSwdenk- Watchdog:
721c609719bSwdenk		CONFIG_WATCHDOG
722c609719bSwdenk		If this variable is defined, it enables watchdog
7237152b1d0Swdenk		support. There must be support in the platform specific
724c609719bSwdenk		code for a watchdog. For the 8xx and 8260 CPUs, the
725c609719bSwdenk		SIU Watchdog feature is enabled in the SYPCR
726c609719bSwdenk		register.
727c609719bSwdenk
728c1551ea8Sstroese- U-Boot Version:
729c1551ea8Sstroese		CONFIG_VERSION_VARIABLE
730c1551ea8Sstroese		If this variable is defined, an environment variable
731c1551ea8Sstroese		named "ver" is created by U-Boot showing the U-Boot
732c1551ea8Sstroese		version as printed by the "version" command.
733c1551ea8Sstroese		This variable is readonly.
734c1551ea8Sstroese
735c609719bSwdenk- Real-Time Clock:
736c609719bSwdenk
737602ad3b3SJon Loeliger		When CONFIG_CMD_DATE is selected, the type of the RTC
738c609719bSwdenk		has to be selected, too. Define exactly one of the
739c609719bSwdenk		following options:
740c609719bSwdenk
741c609719bSwdenk		CONFIG_RTC_MPC8xx	- use internal RTC of MPC8xx
742c609719bSwdenk		CONFIG_RTC_PCF8563	- use Philips PCF8563 RTC
7437ce63709SGuennadi Liakhovetski		CONFIG_RTC_MC13783	- use MC13783 RTC
744c609719bSwdenk		CONFIG_RTC_MC146818	- use MC146818 RTC
7451cb8e980Swdenk		CONFIG_RTC_DS1307	- use Maxim, Inc. DS1307 RTC
746c609719bSwdenk		CONFIG_RTC_DS1337	- use Maxim, Inc. DS1337 RTC
7477f70e853Swdenk		CONFIG_RTC_DS1338	- use Maxim, Inc. DS1338 RTC
7483bac3513Swdenk		CONFIG_RTC_DS164x	- use Dallas DS164x RTC
7499536dfccSTor Krill		CONFIG_RTC_ISL1208	- use Intersil ISL1208 RTC
7504c0d4c3bSwdenk		CONFIG_RTC_MAX6900	- use Maxim, Inc. MAX6900 RTC
7516d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_RTC_DS1337_NOOSC	- Turn off the OSC output for DS1337
75271d19f30SHeiko Schocher		CONFIG_SYS_RV3029_TCR	- enable trickle charger on
75371d19f30SHeiko Schocher					  RV3029 RTC.
754c609719bSwdenk
755b37c7e5eSwdenk		Note that if the RTC uses I2C, then the I2C interface
756b37c7e5eSwdenk		must also be configured. See I2C Support, below.
757b37c7e5eSwdenk
758e92739d3SPeter Tyser- GPIO Support:
759e92739d3SPeter Tyser		CONFIG_PCA953X		- use NXP's PCA953X series I2C GPIO
760e92739d3SPeter Tyser		CONFIG_PCA953X_INFO	- enable pca953x info command
761e92739d3SPeter Tyser
7625dec49caSChris Packham		The CONFIG_SYS_I2C_PCA953X_WIDTH option specifies a list of
7635dec49caSChris Packham		chip-ngpio pairs that tell the PCA953X driver the number of
7645dec49caSChris Packham		pins supported by a particular chip.
7655dec49caSChris Packham
766e92739d3SPeter Tyser		Note that if the GPIO device uses I2C, then the I2C interface
767e92739d3SPeter Tyser		must also be configured. See I2C Support, below.
768e92739d3SPeter Tyser
769c609719bSwdenk- Timestamp Support:
770c609719bSwdenk
771c609719bSwdenk		When CONFIG_TIMESTAMP is selected, the timestamp
772c609719bSwdenk		(date and time) of an image is printed by image
773c609719bSwdenk		commands like bootm or iminfo. This option is
774602ad3b3SJon Loeliger		automatically enabled when you select CONFIG_CMD_DATE .
775c609719bSwdenk
776c609719bSwdenk- Partition Support:
777c609719bSwdenk		CONFIG_MAC_PARTITION and/or CONFIG_DOS_PARTITION
77807f3d789Srichardretanubun		and/or CONFIG_ISO_PARTITION and/or CONFIG_EFI_PARTITION
779c609719bSwdenk
780602ad3b3SJon Loeliger		If IDE or SCSI support is enabled (CONFIG_CMD_IDE or
781218ca724SWolfgang Denk		CONFIG_CMD_SCSI) you must configure support for at
782218ca724SWolfgang Denk		least one partition type as well.
783c609719bSwdenk
784c609719bSwdenk- IDE Reset method:
7854d13cbadSwdenk		CONFIG_IDE_RESET_ROUTINE - this is defined in several
7864d13cbadSwdenk		board configurations files but used nowhere!
787c609719bSwdenk
7884d13cbadSwdenk		CONFIG_IDE_RESET - is this is defined, IDE Reset will
7894d13cbadSwdenk		be performed by calling the function
7904d13cbadSwdenk			ide_set_reset(int reset)
7914d13cbadSwdenk		which has to be defined in a board specific file
792c609719bSwdenk
793c609719bSwdenk- ATAPI Support:
794c609719bSwdenk		CONFIG_ATAPI
795c609719bSwdenk
796c609719bSwdenk		Set this to enable ATAPI support.
797c609719bSwdenk
798c40b2956Swdenk- LBA48 Support
799c40b2956Swdenk		CONFIG_LBA48
800c40b2956Swdenk
801c40b2956Swdenk		Set this to enable support for disks larger than 137GB
8024b142febSHeiko Schocher		Also look at CONFIG_SYS_64BIT_LBA.
803c40b2956Swdenk		Whithout these , LBA48 support uses 32bit variables and will 'only'
804c40b2956Swdenk		support disks up to 2.1TB.
805c40b2956Swdenk
8066d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_64BIT_LBA:
807c40b2956Swdenk			When enabled, makes the IDE subsystem use 64bit sector addresses.
808c40b2956Swdenk			Default is 32bit.
809c40b2956Swdenk
810c609719bSwdenk- SCSI Support:
811c609719bSwdenk		At the moment only there is only support for the
812c609719bSwdenk		SYM53C8XX SCSI controller; define
813c609719bSwdenk		CONFIG_SCSI_SYM53C8XX to enable it.
814c609719bSwdenk
8156d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_SCSI_MAX_LUN [8], CONFIG_SYS_SCSI_MAX_SCSI_ID [7] and
8166d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_SCSI_MAX_DEVICE [CONFIG_SYS_SCSI_MAX_SCSI_ID *
8176d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_SCSI_MAX_LUN] can be adjusted to define the
818c609719bSwdenk		maximum numbers of LUNs, SCSI ID's and target
819c609719bSwdenk		devices.
8206d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz)
821c609719bSwdenk
822c609719bSwdenk- NETWORK Support (PCI):
823682011ffSwdenk		CONFIG_E1000
824682011ffSwdenk		Support for Intel 8254x gigabit chips.
825682011ffSwdenk
826ac3315c2SAndre Schwarz		CONFIG_E1000_FALLBACK_MAC
82711ccc33fSMarcel Ziswiler		default MAC for empty EEPROM after production.
828ac3315c2SAndre Schwarz
829c609719bSwdenk		CONFIG_EEPRO100
830c609719bSwdenk		Support for Intel 82557/82559/82559ER chips.
83111ccc33fSMarcel Ziswiler		Optional CONFIG_EEPRO100_SROM_WRITE enables EEPROM
832c609719bSwdenk		write routine for first time initialisation.
833c609719bSwdenk
834c609719bSwdenk		CONFIG_TULIP
835c609719bSwdenk		Support for Digital 2114x chips.
836c609719bSwdenk		Optional CONFIG_TULIP_SELECT_MEDIA for board specific
837c609719bSwdenk		modem chip initialisation (KS8761/QS6611).
838c609719bSwdenk
839c609719bSwdenk		CONFIG_NATSEMI
840c609719bSwdenk		Support for National dp83815 chips.
841c609719bSwdenk
842c609719bSwdenk		CONFIG_NS8382X
843c609719bSwdenk		Support for National dp8382[01] gigabit chips.
844c609719bSwdenk
84545219c46Swdenk- NETWORK Support (other):
84645219c46Swdenk
847c041e9d2SJens Scharsig		CONFIG_DRIVER_AT91EMAC
848c041e9d2SJens Scharsig		Support for AT91RM9200 EMAC.
849c041e9d2SJens Scharsig
850c041e9d2SJens Scharsig			CONFIG_RMII
851c041e9d2SJens Scharsig			Define this to use reduced MII inteface
852c041e9d2SJens Scharsig
853c041e9d2SJens Scharsig			CONFIG_DRIVER_AT91EMAC_QUIET
854c041e9d2SJens Scharsig			If this defined, the driver is quiet.
855c041e9d2SJens Scharsig			The driver doen't show link status messages.
856c041e9d2SJens Scharsig
85745219c46Swdenk		CONFIG_DRIVER_LAN91C96
85845219c46Swdenk		Support for SMSC's LAN91C96 chips.
85945219c46Swdenk
86045219c46Swdenk			CONFIG_LAN91C96_BASE
86145219c46Swdenk			Define this to hold the physical address
86245219c46Swdenk			of the LAN91C96's I/O space
86345219c46Swdenk
86445219c46Swdenk			CONFIG_LAN91C96_USE_32_BIT
86545219c46Swdenk			Define this to enable 32 bit addressing
86645219c46Swdenk
867f39748aeSwdenk		CONFIG_DRIVER_SMC91111
868f39748aeSwdenk		Support for SMSC's LAN91C111 chip
869f39748aeSwdenk
870f39748aeSwdenk			CONFIG_SMC91111_BASE
871f39748aeSwdenk			Define this to hold the physical address
872f39748aeSwdenk			of the device (I/O space)
873f39748aeSwdenk
874f39748aeSwdenk			CONFIG_SMC_USE_32_BIT
875f39748aeSwdenk			Define this if data bus is 32 bits
876f39748aeSwdenk
877f39748aeSwdenk			CONFIG_SMC_USE_IOFUNCS
878f39748aeSwdenk			Define this to use i/o functions instead of macros
879f39748aeSwdenk			(some hardware wont work with macros)
880f39748aeSwdenk
881b3dbf4a5SMacpaul Lin		CONFIG_FTGMAC100
882b3dbf4a5SMacpaul Lin		Support for Faraday's FTGMAC100 Gigabit SoC Ethernet
883b3dbf4a5SMacpaul Lin
884b3dbf4a5SMacpaul Lin			CONFIG_FTGMAC100_EGIGA
885b3dbf4a5SMacpaul Lin			Define this to use GE link update with gigabit PHY.
886b3dbf4a5SMacpaul Lin			Define this if FTGMAC100 is connected to gigabit PHY.
887b3dbf4a5SMacpaul Lin			If your system has 10/100 PHY only, it might not occur
888b3dbf4a5SMacpaul Lin			wrong behavior. Because PHY usually return timeout or
889b3dbf4a5SMacpaul Lin			useless data when polling gigabit status and gigabit
890b3dbf4a5SMacpaul Lin			control registers. This behavior won't affect the
891b3dbf4a5SMacpaul Lin			correctnessof 10/100 link speed update.
892b3dbf4a5SMacpaul Lin
893c2fff331SMike Rapoport		CONFIG_SMC911X
894557b377dSJens Gehrlein		Support for SMSC's LAN911x and LAN921x chips
895557b377dSJens Gehrlein
896c2fff331SMike Rapoport			CONFIG_SMC911X_BASE
897557b377dSJens Gehrlein			Define this to hold the physical address
898557b377dSJens Gehrlein			of the device (I/O space)
899557b377dSJens Gehrlein
900c2fff331SMike Rapoport			CONFIG_SMC911X_32_BIT
901557b377dSJens Gehrlein			Define this if data bus is 32 bits
902557b377dSJens Gehrlein
903c2fff331SMike Rapoport			CONFIG_SMC911X_16_BIT
904557b377dSJens Gehrlein			Define this if data bus is 16 bits. If your processor
905557b377dSJens Gehrlein			automatically converts one 32 bit word to two 16 bit
906c2fff331SMike Rapoport			words you may also try CONFIG_SMC911X_32_BIT.
907557b377dSJens Gehrlein
9083d0075faSYoshihiro Shimoda		CONFIG_SH_ETHER
9093d0075faSYoshihiro Shimoda		Support for Renesas on-chip Ethernet controller
9103d0075faSYoshihiro Shimoda
9113d0075faSYoshihiro Shimoda			CONFIG_SH_ETHER_USE_PORT
9123d0075faSYoshihiro Shimoda			Define the number of ports to be used
9133d0075faSYoshihiro Shimoda
9143d0075faSYoshihiro Shimoda			CONFIG_SH_ETHER_PHY_ADDR
9153d0075faSYoshihiro Shimoda			Define the ETH PHY's address
9163d0075faSYoshihiro Shimoda
91768260aabSYoshihiro Shimoda			CONFIG_SH_ETHER_CACHE_WRITEBACK
91868260aabSYoshihiro Shimoda			If this option is set, the driver enables cache flush.
91968260aabSYoshihiro Shimoda
920c609719bSwdenk- USB Support:
921c609719bSwdenk		At the moment only the UHCI host controller is
9224d13cbadSwdenk		supported (PIP405, MIP405, MPC5200); define
923c609719bSwdenk		CONFIG_USB_UHCI to enable it.
924c609719bSwdenk		define CONFIG_USB_KEYBOARD to enable the USB Keyboard
92530d56faeSwdenk		and define CONFIG_USB_STORAGE to enable the USB
926c609719bSwdenk		storage devices.
927c609719bSwdenk		Note:
928c609719bSwdenk		Supported are USB Keyboards and USB Floppy drives
929c609719bSwdenk		(TEAC FD-05PUB).
9304d13cbadSwdenk		MPC5200 USB requires additional defines:
9314d13cbadSwdenk			CONFIG_USB_CLOCK
9324d13cbadSwdenk				for 528 MHz Clock: 0x0001bbbb
933307ecb6dSEric Millbrandt			CONFIG_PSC3_USB
934307ecb6dSEric Millbrandt				for USB on PSC3
9354d13cbadSwdenk			CONFIG_USB_CONFIG
9364d13cbadSwdenk				for differential drivers: 0x00001000
9374d13cbadSwdenk				for single ended drivers: 0x00005000
938307ecb6dSEric Millbrandt				for differential drivers on PSC3: 0x00000100
939307ecb6dSEric Millbrandt				for single ended drivers on PSC3: 0x00004100
9406d0f6bcfSJean-Christophe PLAGNIOL-VILLARD			CONFIG_SYS_USB_EVENT_POLL
941fdcfaa1bSZhang Wei				May be defined to allow interrupt polling
942fdcfaa1bSZhang Wei				instead of using asynchronous interrupts
9434d13cbadSwdenk
94416c8d5e7SWolfgang Denk- USB Device:
94516c8d5e7SWolfgang Denk		Define the below if you wish to use the USB console.
94616c8d5e7SWolfgang Denk		Once firmware is rebuilt from a serial console issue the
94716c8d5e7SWolfgang Denk		command "setenv stdin usbtty; setenv stdout usbtty" and
94811ccc33fSMarcel Ziswiler		attach your USB cable. The Unix command "dmesg" should print
94916c8d5e7SWolfgang Denk		it has found a new device. The environment variable usbtty
95016c8d5e7SWolfgang Denk		can be set to gserial or cdc_acm to enable your device to
95116c8d5e7SWolfgang Denk		appear to a USB host as a Linux gserial device or a
95216c8d5e7SWolfgang Denk		Common Device Class Abstract Control Model serial device.
95316c8d5e7SWolfgang Denk		If you select usbtty = gserial you should be able to enumerate
95416c8d5e7SWolfgang Denk		a Linux host by
95516c8d5e7SWolfgang Denk		# modprobe usbserial vendor=0xVendorID product=0xProductID
95616c8d5e7SWolfgang Denk		else if using cdc_acm, simply setting the environment
95716c8d5e7SWolfgang Denk		variable usbtty to be cdc_acm should suffice. The following
95816c8d5e7SWolfgang Denk		might be defined in YourBoardName.h
95916c8d5e7SWolfgang Denk
96016c8d5e7SWolfgang Denk			CONFIG_USB_DEVICE
96116c8d5e7SWolfgang Denk			Define this to build a UDC device
96216c8d5e7SWolfgang Denk
96316c8d5e7SWolfgang Denk			CONFIG_USB_TTY
96416c8d5e7SWolfgang Denk			Define this to have a tty type of device available to
96516c8d5e7SWolfgang Denk			talk to the UDC device
96616c8d5e7SWolfgang Denk
9676d0f6bcfSJean-Christophe PLAGNIOL-VILLARD			CONFIG_SYS_CONSOLE_IS_IN_ENV
96816c8d5e7SWolfgang Denk			Define this if you want stdin, stdout &/or stderr to
96916c8d5e7SWolfgang Denk			be set to usbtty.
97016c8d5e7SWolfgang Denk
97116c8d5e7SWolfgang Denk			mpc8xx:
9726d0f6bcfSJean-Christophe PLAGNIOL-VILLARD				CONFIG_SYS_USB_EXTC_CLK 0xBLAH
97316c8d5e7SWolfgang Denk				Derive USB clock from external clock "blah"
9746d0f6bcfSJean-Christophe PLAGNIOL-VILLARD				- CONFIG_SYS_USB_EXTC_CLK 0x02
97516c8d5e7SWolfgang Denk
9766d0f6bcfSJean-Christophe PLAGNIOL-VILLARD				CONFIG_SYS_USB_BRG_CLK 0xBLAH
97716c8d5e7SWolfgang Denk				Derive USB clock from brgclk
9786d0f6bcfSJean-Christophe PLAGNIOL-VILLARD				- CONFIG_SYS_USB_BRG_CLK 0x04
97916c8d5e7SWolfgang Denk
98016c8d5e7SWolfgang Denk		If you have a USB-IF assigned VendorID then you may wish to
98116c8d5e7SWolfgang Denk		define your own vendor specific values either in BoardName.h
98216c8d5e7SWolfgang Denk		or directly in usbd_vendor_info.h. If you don't define
98316c8d5e7SWolfgang Denk		CONFIG_USBD_MANUFACTURER, CONFIG_USBD_PRODUCT_NAME,
98416c8d5e7SWolfgang Denk		CONFIG_USBD_VENDORID and CONFIG_USBD_PRODUCTID, then U-Boot
98516c8d5e7SWolfgang Denk		should pretend to be a Linux device to it's target host.
98616c8d5e7SWolfgang Denk
98716c8d5e7SWolfgang Denk			CONFIG_USBD_MANUFACTURER
98816c8d5e7SWolfgang Denk			Define this string as the name of your company for
98916c8d5e7SWolfgang Denk			- CONFIG_USBD_MANUFACTURER "my company"
99016c8d5e7SWolfgang Denk
99116c8d5e7SWolfgang Denk			CONFIG_USBD_PRODUCT_NAME
99216c8d5e7SWolfgang Denk			Define this string as the name of your product
99316c8d5e7SWolfgang Denk			- CONFIG_USBD_PRODUCT_NAME "acme usb device"
99416c8d5e7SWolfgang Denk
99516c8d5e7SWolfgang Denk			CONFIG_USBD_VENDORID
99616c8d5e7SWolfgang Denk			Define this as your assigned Vendor ID from the USB
99716c8d5e7SWolfgang Denk			Implementors Forum. This *must* be a genuine Vendor ID
99816c8d5e7SWolfgang Denk			to avoid polluting the USB namespace.
99916c8d5e7SWolfgang Denk			- CONFIG_USBD_VENDORID 0xFFFF
100016c8d5e7SWolfgang Denk
100116c8d5e7SWolfgang Denk			CONFIG_USBD_PRODUCTID
100216c8d5e7SWolfgang Denk			Define this as the unique Product ID
100316c8d5e7SWolfgang Denk			for your device
100416c8d5e7SWolfgang Denk			- CONFIG_USBD_PRODUCTID 0xFFFF
1005c609719bSwdenk
1006c609719bSwdenk
1007c609719bSwdenk- MMC Support:
1008c609719bSwdenk		The MMC controller on the Intel PXA is supported. To
1009c609719bSwdenk		enable this define CONFIG_MMC. The MMC can be
1010c609719bSwdenk		accessed from the boot prompt by mapping the device
1011c609719bSwdenk		to physical memory similar to flash. Command line is
1012602ad3b3SJon Loeliger		enabled with CONFIG_CMD_MMC. The MMC driver also works with
1013602ad3b3SJon Loeliger		the FAT fs. This is enabled with CONFIG_CMD_FAT.
1014c609719bSwdenk
10156705d81eSwdenk- Journaling Flash filesystem support:
10166705d81eSwdenk		CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
10176705d81eSwdenk		CONFIG_JFFS2_NAND_DEV
10186705d81eSwdenk		Define these for a default partition on a NAND device
10196705d81eSwdenk
10206d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_JFFS2_FIRST_SECTOR,
10216d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_JFFS2_FIRST_BANK, CONFIG_SYS_JFFS2_NUM_BANKS
10226705d81eSwdenk		Define these for a default partition on a NOR device
10236705d81eSwdenk
10246d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_JFFS_CUSTOM_PART
10256705d81eSwdenk		Define this to create an own partition. You have to provide a
10266705d81eSwdenk		function struct part_info* jffs2_part_info(int part_num)
10276705d81eSwdenk
10286705d81eSwdenk		If you define only one JFFS2 partition you may also want to
10296d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		#define CONFIG_SYS_JFFS_SINGLE_PART	1
10306705d81eSwdenk		to disable the command chpart. This is the default when you
10316705d81eSwdenk		have not defined a custom partition
10326705d81eSwdenk
1033c609719bSwdenk- Keyboard Support:
1034c609719bSwdenk		CONFIG_ISA_KEYBOARD
1035c609719bSwdenk
1036c609719bSwdenk		Define this to enable standard (PC-Style) keyboard
1037c609719bSwdenk		support
1038c609719bSwdenk
1039c609719bSwdenk		CONFIG_I8042_KBD
1040c609719bSwdenk		Standard PC keyboard driver with US (is default) and
1041c609719bSwdenk		GERMAN key layout (switch via environment 'keymap=de') support.
1042c609719bSwdenk		Export function i8042_kbd_init, i8042_tstc and i8042_getc
1043c609719bSwdenk		for cfb_console. Supports cursor blinking.
1044c609719bSwdenk
1045c609719bSwdenk- Video support:
1046c609719bSwdenk		CONFIG_VIDEO
1047c609719bSwdenk
1048c609719bSwdenk		Define this to enable video support (for output to
1049c609719bSwdenk		video).
1050c609719bSwdenk
1051c609719bSwdenk		CONFIG_VIDEO_CT69000
1052c609719bSwdenk
1053c609719bSwdenk		Enable Chips & Technologies 69000 Video chip
1054c609719bSwdenk
1055c609719bSwdenk		CONFIG_VIDEO_SMI_LYNXEM
1056eeb1b77bSwdenk		Enable Silicon Motion SMI 712/710/810 Video chip. The
1057eeb1b77bSwdenk		video output is selected via environment 'videoout'
1058eeb1b77bSwdenk		(1 = LCD and 2 = CRT). If videoout is undefined, CRT is
1059eeb1b77bSwdenk		assumed.
1060c609719bSwdenk
1061eeb1b77bSwdenk		For the CT69000 and SMI_LYNXEM drivers, videomode is
106211ccc33fSMarcel Ziswiler		selected via environment 'videomode'. Two different ways
1063eeb1b77bSwdenk		are possible:
1064eeb1b77bSwdenk		- "videomode=num"   'num' is a standard LiLo mode numbers.
1065eeb1b77bSwdenk		Following standard modes are supported	(* is default):
1066eeb1b77bSwdenk
1067eeb1b77bSwdenk		      Colors	640x480 800x600 1024x768 1152x864 1280x1024
1068eeb1b77bSwdenk		-------------+---------------------------------------------
1069eeb1b77bSwdenk		      8 bits |	0x301*	0x303	 0x305	  0x161	    0x307
1070eeb1b77bSwdenk		     15 bits |	0x310	0x313	 0x316	  0x162	    0x319
1071eeb1b77bSwdenk		     16 bits |	0x311	0x314	 0x317	  0x163	    0x31A
1072eeb1b77bSwdenk		     24 bits |	0x312	0x315	 0x318	    ?	    0x31B
1073eeb1b77bSwdenk		-------------+---------------------------------------------
1074c609719bSwdenk		(i.e. setenv videomode 317; saveenv; reset;)
1075c609719bSwdenk
1076eeb1b77bSwdenk		- "videomode=bootargs" all the video parameters are parsed
10777817cb20SMarcel Ziswiler		from the bootargs. (See drivers/video/videomodes.c)
1078eeb1b77bSwdenk
1079eeb1b77bSwdenk
1080a6c7ad2fSwdenk		CONFIG_VIDEO_SED13806
1081a6c7ad2fSwdenk		Enable Epson SED13806 driver. This driver supports 8bpp
1082a6c7ad2fSwdenk		and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP
1083a6c7ad2fSwdenk		or CONFIG_VIDEO_SED13806_16BPP
1084a6c7ad2fSwdenk
10857d3053fbSTimur Tabi		CONFIG_FSL_DIU_FB
10867d3053fbSTimur Tabi		Enable the Freescale DIU video driver.  Reference boards for
10877d3053fbSTimur Tabi		SOCs that have a DIU should define this macro to enable DIU
10887d3053fbSTimur Tabi		support, and should also define these other macros:
10897d3053fbSTimur Tabi
10907d3053fbSTimur Tabi			CONFIG_SYS_DIU_ADDR
10917d3053fbSTimur Tabi			CONFIG_VIDEO
10927d3053fbSTimur Tabi			CONFIG_CMD_BMP
10937d3053fbSTimur Tabi			CONFIG_CFB_CONSOLE
10947d3053fbSTimur Tabi			CONFIG_VIDEO_SW_CURSOR
10957d3053fbSTimur Tabi			CONFIG_VGA_AS_SINGLE_DEVICE
10967d3053fbSTimur Tabi			CONFIG_VIDEO_LOGO
10977d3053fbSTimur Tabi			CONFIG_VIDEO_BMP_LOGO
10987d3053fbSTimur Tabi
1099ba8e76bdSTimur Tabi		The DIU driver will look for the 'video-mode' environment
1100ba8e76bdSTimur Tabi		variable, and if defined, enable the DIU as a console during
1101ba8e76bdSTimur Tabi		boot.  See the documentation file README.video for a
1102ba8e76bdSTimur Tabi		description of this variable.
11037d3053fbSTimur Tabi
1104682011ffSwdenk- Keyboard Support:
1105682011ffSwdenk		CONFIG_KEYBOARD
1106682011ffSwdenk
1107682011ffSwdenk		Define this to enable a custom keyboard support.
1108682011ffSwdenk		This simply calls drv_keyboard_init() which must be
1109682011ffSwdenk		defined in your board-specific files.
1110682011ffSwdenk		The only board using this so far is RBC823.
1111a6c7ad2fSwdenk
1112c609719bSwdenk- LCD Support:	CONFIG_LCD
1113c609719bSwdenk
1114c609719bSwdenk		Define this to enable LCD support (for output to LCD
1115c609719bSwdenk		display); also select one of the supported displays
1116c609719bSwdenk		by defining one of these:
1117c609719bSwdenk
111839cf4804SStelian Pop		CONFIG_ATMEL_LCD:
111939cf4804SStelian Pop
112039cf4804SStelian Pop			HITACHI TX09D70VM1CCA, 3.5", 240x320.
112139cf4804SStelian Pop
1122fd3103bbSwdenk		CONFIG_NEC_NL6448AC33:
1123c609719bSwdenk
1124fd3103bbSwdenk			NEC NL6448AC33-18. Active, color, single scan.
1125c609719bSwdenk
1126fd3103bbSwdenk		CONFIG_NEC_NL6448BC20
1127c609719bSwdenk
1128fd3103bbSwdenk			NEC NL6448BC20-08. 6.5", 640x480.
1129fd3103bbSwdenk			Active, color, single scan.
1130fd3103bbSwdenk
1131fd3103bbSwdenk		CONFIG_NEC_NL6448BC33_54
1132fd3103bbSwdenk
1133fd3103bbSwdenk			NEC NL6448BC33-54. 10.4", 640x480.
1134c609719bSwdenk			Active, color, single scan.
1135c609719bSwdenk
1136c609719bSwdenk		CONFIG_SHARP_16x9
1137c609719bSwdenk
1138c609719bSwdenk			Sharp 320x240. Active, color, single scan.
1139c609719bSwdenk			It isn't 16x9, and I am not sure what it is.
1140c609719bSwdenk
1141c609719bSwdenk		CONFIG_SHARP_LQ64D341
1142c609719bSwdenk
1143c609719bSwdenk			Sharp LQ64D341 display, 640x480.
1144c609719bSwdenk			Active, color, single scan.
1145c609719bSwdenk
1146c609719bSwdenk		CONFIG_HLD1045
1147c609719bSwdenk
1148c609719bSwdenk			HLD1045 display, 640x480.
1149c609719bSwdenk			Active, color, single scan.
1150c609719bSwdenk
1151c609719bSwdenk		CONFIG_OPTREX_BW
1152c609719bSwdenk
1153c609719bSwdenk			Optrex	 CBL50840-2 NF-FW 99 22 M5
1154c609719bSwdenk			or
1155c609719bSwdenk			Hitachi	 LMG6912RPFC-00T
1156c609719bSwdenk			or
1157c609719bSwdenk			Hitachi	 SP14Q002
1158c609719bSwdenk
1159c609719bSwdenk			320x240. Black & white.
1160c609719bSwdenk
1161c609719bSwdenk		Normally display is black on white background; define
11626d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_WHITE_ON_BLACK to get it inverted.
1163c609719bSwdenk
11647152b1d0Swdenk- Splash Screen Support: CONFIG_SPLASH_SCREEN
1165d791b1dcSwdenk
1166d791b1dcSwdenk		If this option is set, the environment is checked for
1167d791b1dcSwdenk		a variable "splashimage". If found, the usual display
1168d791b1dcSwdenk		of logo, copyright and system information on the LCD
1169e94d2cd9Swdenk		is suppressed and the BMP image at the address
1170d791b1dcSwdenk		specified in "splashimage" is loaded instead. The
1171d791b1dcSwdenk		console is redirected to the "nulldev", too. This
1172d791b1dcSwdenk		allows for a "silent" boot where a splash screen is
1173d791b1dcSwdenk		loaded very quickly after power-on.
1174d791b1dcSwdenk
11751ca298ceSMatthias Weisser		CONFIG_SPLASH_SCREEN_ALIGN
11761ca298ceSMatthias Weisser
11771ca298ceSMatthias Weisser		If this option is set the splash image can be freely positioned
11781ca298ceSMatthias Weisser		on the screen. Environment variable "splashpos" specifies the
11791ca298ceSMatthias Weisser		position as "x,y". If a positive number is given it is used as
11801ca298ceSMatthias Weisser		number of pixel from left/top. If a negative number is given it
11811ca298ceSMatthias Weisser		is used as number of pixel from right/bottom. You can also
11821ca298ceSMatthias Weisser		specify 'm' for centering the image.
11831ca298ceSMatthias Weisser
11841ca298ceSMatthias Weisser		Example:
11851ca298ceSMatthias Weisser		setenv splashpos m,m
11861ca298ceSMatthias Weisser			=> image at center of screen
11871ca298ceSMatthias Weisser
11881ca298ceSMatthias Weisser		setenv splashpos 30,20
11891ca298ceSMatthias Weisser			=> image at x = 30 and y = 20
11901ca298ceSMatthias Weisser
11911ca298ceSMatthias Weisser		setenv splashpos -10,m
11921ca298ceSMatthias Weisser			=> vertically centered image
11931ca298ceSMatthias Weisser			   at x = dspWidth - bmpWidth - 9
11941ca298ceSMatthias Weisser
119598f4a3dfSStefan Roese- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP
119698f4a3dfSStefan Roese
119798f4a3dfSStefan Roese		If this option is set, additionally to standard BMP
119898f4a3dfSStefan Roese		images, gzipped BMP images can be displayed via the
119998f4a3dfSStefan Roese		splashscreen support or the bmp command.
120098f4a3dfSStefan Roese
1201d5011762SAnatolij Gustschin- Run length encoded BMP image (RLE8) support: CONFIG_VIDEO_BMP_RLE8
1202d5011762SAnatolij Gustschin
1203d5011762SAnatolij Gustschin		If this option is set, 8-bit RLE compressed BMP images
1204d5011762SAnatolij Gustschin		can be displayed via the splashscreen support or the
1205d5011762SAnatolij Gustschin		bmp command.
1206d5011762SAnatolij Gustschin
1207c29fdfc1Swdenk- Compression support:
1208c29fdfc1Swdenk		CONFIG_BZIP2
1209c29fdfc1Swdenk
1210c29fdfc1Swdenk		If this option is set, support for bzip2 compressed
1211c29fdfc1Swdenk		images is included. If not, only uncompressed and gzip
1212c29fdfc1Swdenk		compressed images are supported.
1213c29fdfc1Swdenk
1214c29fdfc1Swdenk		NOTE: the bzip2 algorithm requires a lot of RAM, so
12156d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		the malloc area (as defined by CONFIG_SYS_MALLOC_LEN) should
1216c29fdfc1Swdenk		be at least 4MB.
1217d791b1dcSwdenk
1218fc9c1727SLuigi 'Comio' Mantellini		CONFIG_LZMA
1219fc9c1727SLuigi 'Comio' Mantellini
1220fc9c1727SLuigi 'Comio' Mantellini		If this option is set, support for lzma compressed
1221fc9c1727SLuigi 'Comio' Mantellini		images is included.
1222fc9c1727SLuigi 'Comio' Mantellini
1223fc9c1727SLuigi 'Comio' Mantellini		Note: The LZMA algorithm adds between 2 and 4KB of code and it
1224fc9c1727SLuigi 'Comio' Mantellini		requires an amount of dynamic memory that is given by the
1225fc9c1727SLuigi 'Comio' Mantellini		formula:
1226fc9c1727SLuigi 'Comio' Mantellini
1227fc9c1727SLuigi 'Comio' Mantellini			(1846 + 768 << (lc + lp)) * sizeof(uint16)
1228fc9c1727SLuigi 'Comio' Mantellini
1229fc9c1727SLuigi 'Comio' Mantellini		Where lc and lp stand for, respectively, Literal context bits
1230fc9c1727SLuigi 'Comio' Mantellini		and Literal pos bits.
1231fc9c1727SLuigi 'Comio' Mantellini
1232fc9c1727SLuigi 'Comio' Mantellini		This value is upper-bounded by 14MB in the worst case. Anyway,
1233fc9c1727SLuigi 'Comio' Mantellini		for a ~4MB large kernel image, we have lc=3 and lp=0 for a
1234fc9c1727SLuigi 'Comio' Mantellini		total amount of (1846 + 768 << (3 + 0)) * 2 = ~41KB... that is
1235fc9c1727SLuigi 'Comio' Mantellini		a very small buffer.
1236fc9c1727SLuigi 'Comio' Mantellini
1237fc9c1727SLuigi 'Comio' Mantellini		Use the lzmainfo tool to determinate the lc and lp values and
1238fc9c1727SLuigi 'Comio' Mantellini		then calculate the amount of needed dynamic memory (ensuring
12396d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		the appropriate CONFIG_SYS_MALLOC_LEN value).
1240fc9c1727SLuigi 'Comio' Mantellini
124117ea1177Swdenk- MII/PHY support:
124217ea1177Swdenk		CONFIG_PHY_ADDR
124317ea1177Swdenk
124417ea1177Swdenk		The address of PHY on MII bus.
124517ea1177Swdenk
124617ea1177Swdenk		CONFIG_PHY_CLOCK_FREQ (ppc4xx)
124717ea1177Swdenk
124817ea1177Swdenk		The clock frequency of the MII bus
124917ea1177Swdenk
125017ea1177Swdenk		CONFIG_PHY_GIGE
125117ea1177Swdenk
125217ea1177Swdenk		If this option is set, support for speed/duplex
125311ccc33fSMarcel Ziswiler		detection of gigabit PHY is included.
125417ea1177Swdenk
125517ea1177Swdenk		CONFIG_PHY_RESET_DELAY
125617ea1177Swdenk
125717ea1177Swdenk		Some PHY like Intel LXT971A need extra delay after
125817ea1177Swdenk		reset before any MII register access is possible.
125917ea1177Swdenk		For such PHY, set this option to the usec delay
126017ea1177Swdenk		required. (minimum 300usec for LXT971A)
126117ea1177Swdenk
126217ea1177Swdenk		CONFIG_PHY_CMD_DELAY (ppc4xx)
126317ea1177Swdenk
126417ea1177Swdenk		Some PHY like Intel LXT971A need extra delay after
126517ea1177Swdenk		command issued before MII status register can be read
126617ea1177Swdenk
1267c609719bSwdenk- Ethernet address:
1268c609719bSwdenk		CONFIG_ETHADDR
1269c68a05feSrichardretanubun		CONFIG_ETH1ADDR
1270c609719bSwdenk		CONFIG_ETH2ADDR
1271c609719bSwdenk		CONFIG_ETH3ADDR
1272c68a05feSrichardretanubun		CONFIG_ETH4ADDR
1273c68a05feSrichardretanubun		CONFIG_ETH5ADDR
1274c609719bSwdenk
127511ccc33fSMarcel Ziswiler		Define a default value for Ethernet address to use
127611ccc33fSMarcel Ziswiler		for the respective Ethernet interface, in case this
1277c609719bSwdenk		is not determined automatically.
1278c609719bSwdenk
1279c609719bSwdenk- IP address:
1280c609719bSwdenk		CONFIG_IPADDR
1281c609719bSwdenk
1282c609719bSwdenk		Define a default value for the IP address to use for
128311ccc33fSMarcel Ziswiler		the default Ethernet interface, in case this is not
1284c609719bSwdenk		determined through e.g. bootp.
1285c609719bSwdenk
1286c609719bSwdenk- Server IP address:
1287c609719bSwdenk		CONFIG_SERVERIP
1288c609719bSwdenk
1289c609719bSwdenk		Defines a default value for the IP address of a TFTP
1290c609719bSwdenk		server to contact when using the "tftboot" command.
1291c609719bSwdenk
129297cfe861SRobin Getz		CONFIG_KEEP_SERVERADDR
129397cfe861SRobin Getz
129497cfe861SRobin Getz		Keeps the server's MAC address, in the env 'serveraddr'
129597cfe861SRobin Getz		for passing to bootargs (like Linux's netconsole option)
129697cfe861SRobin Getz
129753a5c424SDavid Updegraff- Multicast TFTP Mode:
129853a5c424SDavid Updegraff		CONFIG_MCAST_TFTP
129953a5c424SDavid Updegraff
130053a5c424SDavid Updegraff		Defines whether you want to support multicast TFTP as per
130153a5c424SDavid Updegraff		rfc-2090; for example to work with atftp.  Lets lots of targets
130211ccc33fSMarcel Ziswiler		tftp down the same boot image concurrently.  Note: the Ethernet
130353a5c424SDavid Updegraff		driver in use must provide a function: mcast() to join/leave a
130453a5c424SDavid Updegraff		multicast group.
130553a5c424SDavid Updegraff
130653a5c424SDavid Updegraff		CONFIG_BOOTP_RANDOM_DELAY
1307c609719bSwdenk- BOOTP Recovery Mode:
1308c609719bSwdenk		CONFIG_BOOTP_RANDOM_DELAY
1309c609719bSwdenk
1310c609719bSwdenk		If you have many targets in a network that try to
1311c609719bSwdenk		boot using BOOTP, you may want to avoid that all
1312c609719bSwdenk		systems send out BOOTP requests at precisely the same
1313c609719bSwdenk		moment (which would happen for instance at recovery
1314c609719bSwdenk		from a power failure, when all systems will try to
1315c609719bSwdenk		boot, thus flooding the BOOTP server. Defining
1316c609719bSwdenk		CONFIG_BOOTP_RANDOM_DELAY causes a random delay to be
1317c609719bSwdenk		inserted before sending out BOOTP requests. The
13186c33c785SWolfgang Denk		following delays are inserted then:
1319c609719bSwdenk
1320c609719bSwdenk		1st BOOTP request:	delay 0 ... 1 sec
1321c609719bSwdenk		2nd BOOTP request:	delay 0 ... 2 sec
1322c609719bSwdenk		3rd BOOTP request:	delay 0 ... 4 sec
1323c609719bSwdenk		4th and following
1324c609719bSwdenk		BOOTP requests:		delay 0 ... 8 sec
1325c609719bSwdenk
1326fe389a82Sstroese- DHCP Advanced Options:
13271fe80d79SJon Loeliger		You can fine tune the DHCP functionality by defining
13281fe80d79SJon Loeliger		CONFIG_BOOTP_* symbols:
1329fe389a82Sstroese
13301fe80d79SJon Loeliger		CONFIG_BOOTP_SUBNETMASK
13311fe80d79SJon Loeliger		CONFIG_BOOTP_GATEWAY
13321fe80d79SJon Loeliger		CONFIG_BOOTP_HOSTNAME
13331fe80d79SJon Loeliger		CONFIG_BOOTP_NISDOMAIN
13341fe80d79SJon Loeliger		CONFIG_BOOTP_BOOTPATH
13351fe80d79SJon Loeliger		CONFIG_BOOTP_BOOTFILESIZE
13361fe80d79SJon Loeliger		CONFIG_BOOTP_DNS
13371fe80d79SJon Loeliger		CONFIG_BOOTP_DNS2
13381fe80d79SJon Loeliger		CONFIG_BOOTP_SEND_HOSTNAME
13391fe80d79SJon Loeliger		CONFIG_BOOTP_NTPSERVER
13401fe80d79SJon Loeliger		CONFIG_BOOTP_TIMEOFFSET
13411fe80d79SJon Loeliger		CONFIG_BOOTP_VENDOREX
1342fe389a82Sstroese
13435d110f0aSWilson Callan		CONFIG_BOOTP_SERVERIP - TFTP server will be the serverip
13445d110f0aSWilson Callan		environment variable, not the BOOTP server.
1345fe389a82Sstroese
1346fe389a82Sstroese		CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS
1347fe389a82Sstroese		serverip from a DHCP server, it is possible that more
1348fe389a82Sstroese		than one DNS serverip is offered to the client.
1349fe389a82Sstroese		If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS
1350fe389a82Sstroese		serverip will be stored in the additional environment
1351fe389a82Sstroese		variable "dnsip2". The first DNS serverip is always
1352fe389a82Sstroese		stored in the variable "dnsip", when CONFIG_BOOTP_DNS
13531fe80d79SJon Loeliger		is defined.
1354fe389a82Sstroese
1355fe389a82Sstroese		CONFIG_BOOTP_SEND_HOSTNAME - Some DHCP servers are capable
1356fe389a82Sstroese		to do a dynamic update of a DNS server. To do this, they
1357fe389a82Sstroese		need the hostname of the DHCP requester.
13585d110f0aSWilson Callan		If CONFIG_BOOTP_SEND_HOSTNAME is defined, the content
13591fe80d79SJon Loeliger		of the "hostname" environment variable is passed as
13601fe80d79SJon Loeliger		option 12 to the DHCP server.
1361fe389a82Sstroese
1362d9a2f416SAras Vaichas		CONFIG_BOOTP_DHCP_REQUEST_DELAY
1363d9a2f416SAras Vaichas
1364d9a2f416SAras Vaichas		A 32bit value in microseconds for a delay between
1365d9a2f416SAras Vaichas		receiving a "DHCP Offer" and sending the "DHCP Request".
1366d9a2f416SAras Vaichas		This fixes a problem with certain DHCP servers that don't
1367d9a2f416SAras Vaichas		respond 100% of the time to a "DHCP request". E.g. On an
1368d9a2f416SAras Vaichas		AT91RM9200 processor running at 180MHz, this delay needed
1369d9a2f416SAras Vaichas		to be *at least* 15,000 usec before a Windows Server 2003
1370d9a2f416SAras Vaichas		DHCP server would reply 100% of the time. I recommend at
1371d9a2f416SAras Vaichas		least 50,000 usec to be safe. The alternative is to hope
1372d9a2f416SAras Vaichas		that one of the retries will be successful but note that
1373d9a2f416SAras Vaichas		the DHCP timeout and retry process takes a longer than
1374d9a2f416SAras Vaichas		this delay.
1375d9a2f416SAras Vaichas
1376a3d991bdSwdenk - CDP Options:
1377a3d991bdSwdenk		CONFIG_CDP_DEVICE_ID
1378a3d991bdSwdenk
1379a3d991bdSwdenk		The device id used in CDP trigger frames.
1380a3d991bdSwdenk
1381a3d991bdSwdenk		CONFIG_CDP_DEVICE_ID_PREFIX
1382a3d991bdSwdenk
1383a3d991bdSwdenk		A two character string which is prefixed to the MAC address
1384a3d991bdSwdenk		of the device.
1385a3d991bdSwdenk
1386a3d991bdSwdenk		CONFIG_CDP_PORT_ID
1387a3d991bdSwdenk
1388a3d991bdSwdenk		A printf format string which contains the ascii name of
1389a3d991bdSwdenk		the port. Normally is set to "eth%d" which sets
139011ccc33fSMarcel Ziswiler		eth0 for the first Ethernet, eth1 for the second etc.
1391a3d991bdSwdenk
1392a3d991bdSwdenk		CONFIG_CDP_CAPABILITIES
1393a3d991bdSwdenk
1394a3d991bdSwdenk		A 32bit integer which indicates the device capabilities;
1395a3d991bdSwdenk		0x00000010 for a normal host which does not forwards.
1396a3d991bdSwdenk
1397a3d991bdSwdenk		CONFIG_CDP_VERSION
1398a3d991bdSwdenk
1399a3d991bdSwdenk		An ascii string containing the version of the software.
1400a3d991bdSwdenk
1401a3d991bdSwdenk		CONFIG_CDP_PLATFORM
1402a3d991bdSwdenk
1403a3d991bdSwdenk		An ascii string containing the name of the platform.
1404a3d991bdSwdenk
1405a3d991bdSwdenk		CONFIG_CDP_TRIGGER
1406a3d991bdSwdenk
1407a3d991bdSwdenk		A 32bit integer sent on the trigger.
1408a3d991bdSwdenk
1409a3d991bdSwdenk		CONFIG_CDP_POWER_CONSUMPTION
1410a3d991bdSwdenk
1411a3d991bdSwdenk		A 16bit integer containing the power consumption of the
1412a3d991bdSwdenk		device in .1 of milliwatts.
1413a3d991bdSwdenk
1414a3d991bdSwdenk		CONFIG_CDP_APPLIANCE_VLAN_TYPE
1415a3d991bdSwdenk
1416a3d991bdSwdenk		A byte containing the id of the VLAN.
1417a3d991bdSwdenk
1418c609719bSwdenk- Status LED:	CONFIG_STATUS_LED
1419c609719bSwdenk
1420c609719bSwdenk		Several configurations allow to display the current
1421c609719bSwdenk		status using a LED. For instance, the LED will blink
1422c609719bSwdenk		fast while running U-Boot code, stop blinking as
1423c609719bSwdenk		soon as a reply to a BOOTP request was received, and
1424c609719bSwdenk		start blinking slow once the Linux kernel is running
1425c609719bSwdenk		(supported by a status LED driver in the Linux
1426c609719bSwdenk		kernel). Defining CONFIG_STATUS_LED enables this
1427c609719bSwdenk		feature in U-Boot.
1428c609719bSwdenk
1429c609719bSwdenk- CAN Support:	CONFIG_CAN_DRIVER
1430c609719bSwdenk
1431c609719bSwdenk		Defining CONFIG_CAN_DRIVER enables CAN driver support
1432c609719bSwdenk		on those systems that support this (optional)
1433c609719bSwdenk		feature, like the TQM8xxL modules.
1434c609719bSwdenk
1435c609719bSwdenk- I2C Support:	CONFIG_HARD_I2C | CONFIG_SOFT_I2C
1436c609719bSwdenk
1437b37c7e5eSwdenk		These enable I2C serial bus commands. Defining either of
1438b37c7e5eSwdenk		(but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will
143911ccc33fSMarcel Ziswiler		include the appropriate I2C driver for the selected CPU.
1440c609719bSwdenk
1441b37c7e5eSwdenk		This will allow you to use i2c commands at the u-boot
1442602ad3b3SJon Loeliger		command line (as long as you set CONFIG_CMD_I2C in
1443b37c7e5eSwdenk		CONFIG_COMMANDS) and communicate with i2c based realtime
1444b37c7e5eSwdenk		clock chips. See common/cmd_i2c.c for a description of the
1445c609719bSwdenk		command line interface.
1446c609719bSwdenk
1447bb99ad6dSBen Warren		CONFIG_HARD_I2C selects a hardware I2C controller.
1448c609719bSwdenk
1449b37c7e5eSwdenk		CONFIG_SOFT_I2C configures u-boot to use a software (aka
1450b37c7e5eSwdenk		bit-banging) driver instead of CPM or similar hardware
1451b37c7e5eSwdenk		support for I2C.
1452c609719bSwdenk
1453b37c7e5eSwdenk		There are several other quantities that must also be
1454b37c7e5eSwdenk		defined when you define CONFIG_HARD_I2C or CONFIG_SOFT_I2C.
1455c609719bSwdenk
14566d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		In both cases you will need to define CONFIG_SYS_I2C_SPEED
1457b37c7e5eSwdenk		to be the frequency (in Hz) at which you wish your i2c bus
14586d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		to run and CONFIG_SYS_I2C_SLAVE to be the address of this node (ie
145911ccc33fSMarcel Ziswiler		the CPU's i2c node address).
1460c609719bSwdenk
14618d321b81SPeter Tyser		Now, the u-boot i2c code for the mpc8xx
1462a47a12beSStefan Roese		(arch/powerpc/cpu/mpc8xx/i2c.c) sets the CPU up as a master node
14638d321b81SPeter Tyser		and so its address should therefore be cleared to 0 (See,
14648d321b81SPeter Tyser		eg, MPC823e User's Manual p.16-473). So, set
14658d321b81SPeter Tyser		CONFIG_SYS_I2C_SLAVE to 0.
1466b37c7e5eSwdenk
14675da71efaSEric Millbrandt		CONFIG_SYS_I2C_INIT_MPC5XXX
14685da71efaSEric Millbrandt
14695da71efaSEric Millbrandt		When a board is reset during an i2c bus transfer
14705da71efaSEric Millbrandt		chips might think that the current transfer is still
14715da71efaSEric Millbrandt		in progress.  Reset the slave devices by sending start
14725da71efaSEric Millbrandt		commands until the slave device responds.
14735da71efaSEric Millbrandt
1474b37c7e5eSwdenk		That's all that's required for CONFIG_HARD_I2C.
1475b37c7e5eSwdenk
1476b37c7e5eSwdenk		If you use the software i2c interface (CONFIG_SOFT_I2C)
1477b37c7e5eSwdenk		then the following macros need to be defined (examples are
1478b37c7e5eSwdenk		from include/configs/lwmon.h):
1479c609719bSwdenk
1480c609719bSwdenk		I2C_INIT
1481c609719bSwdenk
1482b37c7e5eSwdenk		(Optional). Any commands necessary to enable the I2C
1483c609719bSwdenk		controller or configure ports.
1484c609719bSwdenk
1485b37c7e5eSwdenk		eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |=	PB_SCL)
1486b37c7e5eSwdenk
1487c609719bSwdenk		I2C_PORT
1488c609719bSwdenk
1489c609719bSwdenk		(Only for MPC8260 CPU). The I/O port to use (the code
1490c609719bSwdenk		assumes both bits are on the same port). Valid values
1491c609719bSwdenk		are 0..3 for ports A..D.
1492c609719bSwdenk
1493c609719bSwdenk		I2C_ACTIVE
1494c609719bSwdenk
1495c609719bSwdenk		The code necessary to make the I2C data line active
1496c609719bSwdenk		(driven).  If the data line is open collector, this
1497c609719bSwdenk		define can be null.
1498c609719bSwdenk
1499b37c7e5eSwdenk		eg: #define I2C_ACTIVE (immr->im_cpm.cp_pbdir |=  PB_SDA)
1500b37c7e5eSwdenk
1501c609719bSwdenk		I2C_TRISTATE
1502c609719bSwdenk
1503c609719bSwdenk		The code necessary to make the I2C data line tri-stated
1504c609719bSwdenk		(inactive).  If the data line is open collector, this
1505c609719bSwdenk		define can be null.
1506c609719bSwdenk
1507b37c7e5eSwdenk		eg: #define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
1508b37c7e5eSwdenk
1509c609719bSwdenk		I2C_READ
1510c609719bSwdenk
1511c609719bSwdenk		Code that returns TRUE if the I2C data line is high,
1512c609719bSwdenk		FALSE if it is low.
1513c609719bSwdenk
1514b37c7e5eSwdenk		eg: #define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
1515b37c7e5eSwdenk
1516c609719bSwdenk		I2C_SDA(bit)
1517c609719bSwdenk
1518c609719bSwdenk		If <bit> is TRUE, sets the I2C data line high. If it
1519c609719bSwdenk		is FALSE, it clears it (low).
1520c609719bSwdenk
1521b37c7e5eSwdenk		eg: #define I2C_SDA(bit) \
1522b37c7e5eSwdenk			if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
1523b37c7e5eSwdenk			else	immr->im_cpm.cp_pbdat &= ~PB_SDA
1524b37c7e5eSwdenk
1525c609719bSwdenk		I2C_SCL(bit)
1526c609719bSwdenk
1527c609719bSwdenk		If <bit> is TRUE, sets the I2C clock line high. If it
1528c609719bSwdenk		is FALSE, it clears it (low).
1529c609719bSwdenk
1530b37c7e5eSwdenk		eg: #define I2C_SCL(bit) \
1531b37c7e5eSwdenk			if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
1532b37c7e5eSwdenk			else	immr->im_cpm.cp_pbdat &= ~PB_SCL
1533b37c7e5eSwdenk
1534c609719bSwdenk		I2C_DELAY
1535c609719bSwdenk
1536c609719bSwdenk		This delay is invoked four times per clock cycle so this
1537c609719bSwdenk		controls the rate of data transfer.  The data rate thus
1538b37c7e5eSwdenk		is 1 / (I2C_DELAY * 4). Often defined to be something
1539b37c7e5eSwdenk		like:
1540b37c7e5eSwdenk
1541b37c7e5eSwdenk		#define I2C_DELAY  udelay(2)
1542c609719bSwdenk
1543793b5726SMike Frysinger		CONFIG_SOFT_I2C_GPIO_SCL / CONFIG_SOFT_I2C_GPIO_SDA
1544793b5726SMike Frysinger
1545793b5726SMike Frysinger		If your arch supports the generic GPIO framework (asm/gpio.h),
1546793b5726SMike Frysinger		then you may alternatively define the two GPIOs that are to be
1547793b5726SMike Frysinger		used as SCL / SDA.  Any of the previous I2C_xxx macros will
1548793b5726SMike Frysinger		have GPIO-based defaults assigned to them as appropriate.
1549793b5726SMike Frysinger
1550793b5726SMike Frysinger		You should define these to the GPIO value as given directly to
1551793b5726SMike Frysinger		the generic GPIO functions.
1552793b5726SMike Frysinger
15536d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_I2C_INIT_BOARD
155447cd00faSwdenk
155547cd00faSwdenk		When a board is reset during an i2c bus transfer
155647cd00faSwdenk		chips might think that the current transfer is still
155747cd00faSwdenk		in progress. On some boards it is possible to access
155847cd00faSwdenk		the i2c SCLK line directly, either by using the
155947cd00faSwdenk		processor pin as a GPIO or by having a second pin
156047cd00faSwdenk		connected to the bus. If this option is defined a
156147cd00faSwdenk		custom i2c_init_board() routine in boards/xxx/board.c
156247cd00faSwdenk		is run early in the boot sequence.
156347cd00faSwdenk
156426a33504SRichard Retanubun		CONFIG_SYS_I2C_BOARD_LATE_INIT
156526a33504SRichard Retanubun
156626a33504SRichard Retanubun		An alternative to CONFIG_SYS_I2C_INIT_BOARD. If this option is
156726a33504SRichard Retanubun		defined a custom i2c_board_late_init() routine in
156826a33504SRichard Retanubun		boards/xxx/board.c is run AFTER the operations in i2c_init()
156926a33504SRichard Retanubun		is completed. This callpoint can be used to unreset i2c bus
157026a33504SRichard Retanubun		using CPU i2c controller register accesses for CPUs whose i2c
157126a33504SRichard Retanubun		controller provide such a method. It is called at the end of
157226a33504SRichard Retanubun		i2c_init() to allow i2c_init operations to setup the i2c bus
157326a33504SRichard Retanubun		controller on the CPU (e.g. setting bus speed & slave address).
157426a33504SRichard Retanubun
157517ea1177Swdenk		CONFIG_I2CFAST (PPC405GP|PPC405EP only)
157617ea1177Swdenk
157717ea1177Swdenk		This option enables configuration of bi_iic_fast[] flags
157817ea1177Swdenk		in u-boot bd_info structure based on u-boot environment
157917ea1177Swdenk		variable "i2cfast". (see also i2cfast)
158017ea1177Swdenk
1581bb99ad6dSBen Warren		CONFIG_I2C_MULTI_BUS
1582bb99ad6dSBen Warren
1583bb99ad6dSBen Warren		This option allows the use of multiple I2C buses, each of which
1584bb99ad6dSBen Warren		must have a controller.  At any point in time, only one bus is
1585bb99ad6dSBen Warren		active.  To switch to a different bus, use the 'i2c dev' command.
1586bb99ad6dSBen Warren		Note that bus numbering is zero-based.
1587bb99ad6dSBen Warren
15886d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_I2C_NOPROBES
1589bb99ad6dSBen Warren
1590bb99ad6dSBen Warren		This option specifies a list of I2C devices that will be skipped
15910f89c54bSPeter Tyser		when the 'i2c probe' command is issued.  If CONFIG_I2C_MULTI_BUS
15920f89c54bSPeter Tyser		is set, specify a list of bus-device pairs.  Otherwise, specify
15930f89c54bSPeter Tyser		a 1D array of device addresses
1594bb99ad6dSBen Warren
1595bb99ad6dSBen Warren		e.g.
1596bb99ad6dSBen Warren			#undef	CONFIG_I2C_MULTI_BUS
15976d0f6bcfSJean-Christophe PLAGNIOL-VILLARD			#define CONFIG_SYS_I2C_NOPROBES	{0x50,0x68}
1598bb99ad6dSBen Warren
1599bb99ad6dSBen Warren		will skip addresses 0x50 and 0x68 on a board with one I2C bus
1600bb99ad6dSBen Warren
1601bb99ad6dSBen Warren			#define	CONFIG_I2C_MULTI_BUS
16026d0f6bcfSJean-Christophe PLAGNIOL-VILLARD			#define CONFIG_SYS_I2C_MULTI_NOPROBES	{{0,0x50},{0,0x68},{1,0x54}}
1603bb99ad6dSBen Warren
1604bb99ad6dSBen Warren		will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1
1605bb99ad6dSBen Warren
16066d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_SPD_BUS_NUM
1607be5e6181STimur Tabi
1608be5e6181STimur Tabi		If defined, then this indicates the I2C bus number for DDR SPD.
1609be5e6181STimur Tabi		If not defined, then U-Boot assumes that SPD is on I2C bus 0.
1610be5e6181STimur Tabi
16116d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_RTC_BUS_NUM
16120dc018ecSStefan Roese
16130dc018ecSStefan Roese		If defined, then this indicates the I2C bus number for the RTC.
16140dc018ecSStefan Roese		If not defined, then U-Boot assumes that RTC is on I2C bus 0.
16150dc018ecSStefan Roese
16166d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_DTT_BUS_NUM
16170dc018ecSStefan Roese
16180dc018ecSStefan Roese		If defined, then this indicates the I2C bus number for the DTT.
16190dc018ecSStefan Roese		If not defined, then U-Boot assumes that DTT is on I2C bus 0.
16200dc018ecSStefan Roese
16216d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_I2C_DTT_ADDR:
16229ebbb54fSVictor Gallardo
16239ebbb54fSVictor Gallardo		If defined, specifies the I2C address of the DTT device.
16249ebbb54fSVictor Gallardo		If not defined, then U-Boot uses predefined value for
16259ebbb54fSVictor Gallardo		specified DTT device.
16269ebbb54fSVictor Gallardo
1627be5e6181STimur Tabi		CONFIG_FSL_I2C
1628be5e6181STimur Tabi
1629be5e6181STimur Tabi		Define this option if you want to use Freescale's I2C driver in
16307817cb20SMarcel Ziswiler		drivers/i2c/fsl_i2c.c.
1631be5e6181STimur Tabi
163267b23a32SHeiko Schocher		CONFIG_I2C_MUX
163367b23a32SHeiko Schocher
163467b23a32SHeiko Schocher		Define this option if you have I2C devices reached over 1 .. n
163567b23a32SHeiko Schocher		I2C Muxes like the pca9544a. This option addes a new I2C
163667b23a32SHeiko Schocher		Command "i2c bus [muxtype:muxaddr:muxchannel]" which adds a
163767b23a32SHeiko Schocher		new I2C Bus to the existing I2C Busses. If you select the
163867b23a32SHeiko Schocher		new Bus with "i2c dev", u-bbot sends first the commandos for
163967b23a32SHeiko Schocher		the muxes to activate this new "bus".
164067b23a32SHeiko Schocher
164167b23a32SHeiko Schocher		CONFIG_I2C_MULTI_BUS must be also defined, to use this
164267b23a32SHeiko Schocher		feature!
164367b23a32SHeiko Schocher
164467b23a32SHeiko Schocher		Example:
164567b23a32SHeiko Schocher		Adding a new I2C Bus reached over 2 pca9544a muxes
164667b23a32SHeiko Schocher			The First mux with address 70 and channel 6
164767b23a32SHeiko Schocher			The Second mux with address 71 and channel 4
164867b23a32SHeiko Schocher
164967b23a32SHeiko Schocher		=> i2c bus pca9544a:70:6:pca9544a:71:4
165067b23a32SHeiko Schocher
165167b23a32SHeiko Schocher		Use the "i2c bus" command without parameter, to get a list
165267b23a32SHeiko Schocher		of I2C Busses with muxes:
165367b23a32SHeiko Schocher
165467b23a32SHeiko Schocher		=> i2c bus
165567b23a32SHeiko Schocher		Busses reached over muxes:
165667b23a32SHeiko Schocher		Bus ID: 2
165767b23a32SHeiko Schocher		  reached over Mux(es):
165867b23a32SHeiko Schocher		    pca9544a@70 ch: 4
165967b23a32SHeiko Schocher		Bus ID: 3
166067b23a32SHeiko Schocher		  reached over Mux(es):
166167b23a32SHeiko Schocher		    pca9544a@70 ch: 6
166267b23a32SHeiko Schocher		    pca9544a@71 ch: 4
166367b23a32SHeiko Schocher		=>
166467b23a32SHeiko Schocher
166567b23a32SHeiko Schocher		If you now switch to the new I2C Bus 3 with "i2c dev 3"
166667b23a32SHeiko Schocher		u-boot sends First the Commando to the mux@70 to enable
166767b23a32SHeiko Schocher		channel 6, and then the Commando to the mux@71 to enable
166867b23a32SHeiko Schocher		the channel 4.
166967b23a32SHeiko Schocher
167067b23a32SHeiko Schocher		After that, you can use the "normal" i2c commands as
167167b23a32SHeiko Schocher		usual, to communicate with your I2C devices behind
167267b23a32SHeiko Schocher		the 2 muxes.
167367b23a32SHeiko Schocher
167467b23a32SHeiko Schocher		This option is actually implemented for the bitbanging
167567b23a32SHeiko Schocher		algorithm in common/soft_i2c.c and for the Hardware I2C
167667b23a32SHeiko Schocher		Bus on the MPC8260. But it should be not so difficult
167767b23a32SHeiko Schocher		to add this option to other architectures.
167867b23a32SHeiko Schocher
16792ac6985aSAndrew Dyer		CONFIG_SOFT_I2C_READ_REPEATED_START
16802ac6985aSAndrew Dyer
16812ac6985aSAndrew Dyer		defining this will force the i2c_read() function in
16822ac6985aSAndrew Dyer		the soft_i2c driver to perform an I2C repeated start
16832ac6985aSAndrew Dyer		between writing the address pointer and reading the
16842ac6985aSAndrew Dyer		data.  If this define is omitted the default behaviour
16852ac6985aSAndrew Dyer		of doing a stop-start sequence will be used.  Most I2C
16862ac6985aSAndrew Dyer		devices can use either method, but some require one or
16872ac6985aSAndrew Dyer		the other.
1688be5e6181STimur Tabi
1689c609719bSwdenk- SPI Support:	CONFIG_SPI
1690c609719bSwdenk
1691c609719bSwdenk		Enables SPI driver (so far only tested with
1692c609719bSwdenk		SPI EEPROM, also an instance works with Crystal A/D and
1693c609719bSwdenk		D/As on the SACSng board)
1694c609719bSwdenk
16956639562eSYoshihiro Shimoda		CONFIG_SH_SPI
16966639562eSYoshihiro Shimoda
16976639562eSYoshihiro Shimoda		Enables the driver for SPI controller on SuperH. Currently
16986639562eSYoshihiro Shimoda		only SH7757 is supported.
16996639562eSYoshihiro Shimoda
1700c609719bSwdenk		CONFIG_SPI_X
1701c609719bSwdenk
1702c609719bSwdenk		Enables extended (16-bit) SPI EEPROM addressing.
1703c609719bSwdenk		(symmetrical to CONFIG_I2C_X)
1704c609719bSwdenk
1705c609719bSwdenk		CONFIG_SOFT_SPI
1706c609719bSwdenk
1707c609719bSwdenk		Enables a software (bit-bang) SPI driver rather than
1708c609719bSwdenk		using hardware support. This is a general purpose
1709c609719bSwdenk		driver that only requires three general I/O port pins
1710c609719bSwdenk		(two outputs, one input) to function. If this is
1711c609719bSwdenk		defined, the board configuration must define several
1712c609719bSwdenk		SPI configuration items (port pins to use, etc). For
1713c609719bSwdenk		an example, see include/configs/sacsng.h.
1714c609719bSwdenk
171504a9e118SBen Warren		CONFIG_HARD_SPI
171604a9e118SBen Warren
171704a9e118SBen Warren		Enables a hardware SPI driver for general-purpose reads
171804a9e118SBen Warren		and writes.  As with CONFIG_SOFT_SPI, the board configuration
171904a9e118SBen Warren		must define a list of chip-select function pointers.
172004a9e118SBen Warren		Currently supported on some MPC8xxx processors.  For an
172104a9e118SBen Warren		example, see include/configs/mpc8349emds.h.
172204a9e118SBen Warren
172338254f45SGuennadi Liakhovetski		CONFIG_MXC_SPI
172438254f45SGuennadi Liakhovetski
172538254f45SGuennadi Liakhovetski		Enables the driver for the SPI controllers on i.MX and MXC
172638254f45SGuennadi Liakhovetski		SoCs. Currently only i.MX31 is supported.
172738254f45SGuennadi Liakhovetski
17280133502eSMatthias Fuchs- FPGA Support: CONFIG_FPGA
17290133502eSMatthias Fuchs
17300133502eSMatthias Fuchs		Enables FPGA subsystem.
17310133502eSMatthias Fuchs
17320133502eSMatthias Fuchs		CONFIG_FPGA_<vendor>
17330133502eSMatthias Fuchs
17340133502eSMatthias Fuchs		Enables support for specific chip vendors.
17350133502eSMatthias Fuchs		(ALTERA, XILINX)
17360133502eSMatthias Fuchs
17370133502eSMatthias Fuchs		CONFIG_FPGA_<family>
17380133502eSMatthias Fuchs
17390133502eSMatthias Fuchs		Enables support for FPGA family.
17400133502eSMatthias Fuchs		(SPARTAN2, SPARTAN3, VIRTEX2, CYCLONE2, ACEX1K, ACEX)
17410133502eSMatthias Fuchs
17420133502eSMatthias Fuchs		CONFIG_FPGA_COUNT
1743c609719bSwdenk
1744c609719bSwdenk		Specify the number of FPGA devices to support.
1745c609719bSwdenk
17466d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_FPGA_PROG_FEEDBACK
1747c609719bSwdenk
1748c609719bSwdenk		Enable printing of hash marks during FPGA configuration.
1749c609719bSwdenk
17506d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_FPGA_CHECK_BUSY
1751c609719bSwdenk
1752c609719bSwdenk		Enable checks on FPGA configuration interface busy
1753c609719bSwdenk		status by the configuration function. This option
1754c609719bSwdenk		will require a board or device specific function to
1755c609719bSwdenk		be written.
1756c609719bSwdenk
1757c609719bSwdenk		CONFIG_FPGA_DELAY
1758c609719bSwdenk
1759c609719bSwdenk		If defined, a function that provides delays in the FPGA
1760c609719bSwdenk		configuration driver.
1761c609719bSwdenk
17626d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_FPGA_CHECK_CTRLC
1763c609719bSwdenk		Allow Control-C to interrupt FPGA configuration
1764c609719bSwdenk
17656d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_FPGA_CHECK_ERROR
1766c609719bSwdenk
1767c609719bSwdenk		Check for configuration errors during FPGA bitfile
1768c609719bSwdenk		loading. For example, abort during Virtex II
1769c609719bSwdenk		configuration if the INIT_B line goes low (which
1770c609719bSwdenk		indicated a CRC error).
1771c609719bSwdenk
17726d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_FPGA_WAIT_INIT
1773c609719bSwdenk
1774c609719bSwdenk		Maximum time to wait for the INIT_B line to deassert
1775c609719bSwdenk		after PROB_B has been deasserted during a Virtex II
1776c609719bSwdenk		FPGA configuration sequence. The default time is 500
177711ccc33fSMarcel Ziswiler		ms.
1778c609719bSwdenk
17796d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_FPGA_WAIT_BUSY
1780c609719bSwdenk
1781c609719bSwdenk		Maximum time to wait for BUSY to deassert during
178211ccc33fSMarcel Ziswiler		Virtex II FPGA configuration. The default is 5 ms.
1783c609719bSwdenk
17846d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_FPGA_WAIT_CONFIG
1785c609719bSwdenk
1786c609719bSwdenk		Time to wait after FPGA configuration. The default is
178711ccc33fSMarcel Ziswiler		200 ms.
1788c609719bSwdenk
1789c609719bSwdenk- Configuration Management:
1790c609719bSwdenk		CONFIG_IDENT_STRING
1791c609719bSwdenk
1792c609719bSwdenk		If defined, this string will be added to the U-Boot
1793c609719bSwdenk		version information (U_BOOT_VERSION)
1794c609719bSwdenk
1795c609719bSwdenk- Vendor Parameter Protection:
1796c609719bSwdenk
1797c609719bSwdenk		U-Boot considers the values of the environment
1798c609719bSwdenk		variables "serial#" (Board Serial Number) and
17997152b1d0Swdenk		"ethaddr" (Ethernet Address) to be parameters that
1800c609719bSwdenk		are set once by the board vendor / manufacturer, and
1801c609719bSwdenk		protects these variables from casual modification by
1802c609719bSwdenk		the user. Once set, these variables are read-only,
1803c609719bSwdenk		and write or delete attempts are rejected. You can
180411ccc33fSMarcel Ziswiler		change this behaviour:
1805c609719bSwdenk
1806c609719bSwdenk		If CONFIG_ENV_OVERWRITE is #defined in your config
1807c609719bSwdenk		file, the write protection for vendor parameters is
180847cd00faSwdenk		completely disabled. Anybody can change or delete
1809c609719bSwdenk		these parameters.
1810c609719bSwdenk
1811c609719bSwdenk		Alternatively, if you #define _both_ CONFIG_ETHADDR
1812c609719bSwdenk		_and_ CONFIG_OVERWRITE_ETHADDR_ONCE, a default
181311ccc33fSMarcel Ziswiler		Ethernet address is installed in the environment,
1814c609719bSwdenk		which can be changed exactly ONCE by the user. [The
1815c609719bSwdenk		serial# is unaffected by this, i. e. it remains
1816c609719bSwdenk		read-only.]
1817c609719bSwdenk
1818c609719bSwdenk- Protected RAM:
1819c609719bSwdenk		CONFIG_PRAM
1820c609719bSwdenk
1821c609719bSwdenk		Define this variable to enable the reservation of
1822c609719bSwdenk		"protected RAM", i. e. RAM which is not overwritten
1823c609719bSwdenk		by U-Boot. Define CONFIG_PRAM to hold the number of
1824c609719bSwdenk		kB you want to reserve for pRAM. You can overwrite
1825c609719bSwdenk		this default value by defining an environment
1826c609719bSwdenk		variable "pram" to the number of kB you want to
1827c609719bSwdenk		reserve. Note that the board info structure will
1828c609719bSwdenk		still show the full amount of RAM. If pRAM is
1829c609719bSwdenk		reserved, a new environment variable "mem" will
1830c609719bSwdenk		automatically be defined to hold the amount of
1831c609719bSwdenk		remaining RAM in a form that can be passed as boot
1832c609719bSwdenk		argument to Linux, for instance like that:
1833c609719bSwdenk
1834fe126d8bSWolfgang Denk			setenv bootargs ... mem=\${mem}
1835c609719bSwdenk			saveenv
1836c609719bSwdenk
1837c609719bSwdenk		This way you can tell Linux not to use this memory,
1838c609719bSwdenk		either, which results in a memory region that will
1839c609719bSwdenk		not be affected by reboots.
1840c609719bSwdenk
1841c609719bSwdenk		*WARNING* If your board configuration uses automatic
1842c609719bSwdenk		detection of the RAM size, you must make sure that
1843c609719bSwdenk		this memory test is non-destructive. So far, the
1844c609719bSwdenk		following board configurations are known to be
1845c609719bSwdenk		"pRAM-clean":
1846c609719bSwdenk
1847c609719bSwdenk			ETX094, IVMS8, IVML24, SPD8xx, TQM8xxL,
1848c609719bSwdenk			HERMES, IP860, RPXlite, LWMON, LANTEC,
1849544d97e9SWolfgang Denk			FLAGADM, TQM8260
1850c609719bSwdenk
1851c609719bSwdenk- Error Recovery:
1852c609719bSwdenk		CONFIG_PANIC_HANG
1853c609719bSwdenk
1854c609719bSwdenk		Define this variable to stop the system in case of a
1855c609719bSwdenk		fatal error, so that you have to reset it manually.
1856c609719bSwdenk		This is probably NOT a good idea for an embedded
185711ccc33fSMarcel Ziswiler		system where you want the system to reboot
1858c609719bSwdenk		automatically as fast as possible, but it may be
1859c609719bSwdenk		useful during development since you can try to debug
1860c609719bSwdenk		the conditions that lead to the situation.
1861c609719bSwdenk
1862c609719bSwdenk		CONFIG_NET_RETRY_COUNT
1863c609719bSwdenk
1864c609719bSwdenk		This variable defines the number of retries for
1865c609719bSwdenk		network operations like ARP, RARP, TFTP, or BOOTP
1866c609719bSwdenk		before giving up the operation. If not defined, a
1867c609719bSwdenk		default value of 5 is used.
1868c609719bSwdenk
186940cb90eeSGuennadi Liakhovetski		CONFIG_ARP_TIMEOUT
187040cb90eeSGuennadi Liakhovetski
187140cb90eeSGuennadi Liakhovetski		Timeout waiting for an ARP reply in milliseconds.
187240cb90eeSGuennadi Liakhovetski
1873c609719bSwdenk- Command Interpreter:
18748078f1a5SWolfgang Denk		CONFIG_AUTO_COMPLETE
187504a85b3bSwdenk
187604a85b3bSwdenk		Enable auto completion of commands using TAB.
187704a85b3bSwdenk
18788078f1a5SWolfgang Denk		Note that this feature has NOT been implemented yet
18798078f1a5SWolfgang Denk		for the "hush" shell.
18808078f1a5SWolfgang Denk
18818078f1a5SWolfgang Denk
18826d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_HUSH_PARSER
1883c609719bSwdenk
1884c609719bSwdenk		Define this variable to enable the "hush" shell (from
1885c609719bSwdenk		Busybox) as command line interpreter, thus enabling
1886c609719bSwdenk		powerful command line syntax like
1887c609719bSwdenk		if...then...else...fi conditionals or `&&' and '||'
1888c609719bSwdenk		constructs ("shell scripts").
1889c609719bSwdenk
1890c609719bSwdenk		If undefined, you get the old, much simpler behaviour
1891c609719bSwdenk		with a somewhat smaller memory footprint.
1892c609719bSwdenk
1893c609719bSwdenk
18946d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_PROMPT_HUSH_PS2
1895c609719bSwdenk
1896c609719bSwdenk		This defines the secondary prompt string, which is
1897c609719bSwdenk		printed when the command interpreter needs more input
1898c609719bSwdenk		to complete a command. Usually "> ".
1899c609719bSwdenk
1900c609719bSwdenk	Note:
1901c609719bSwdenk
1902c609719bSwdenk		In the current implementation, the local variables
1903c609719bSwdenk		space and global environment variables space are
1904c609719bSwdenk		separated. Local variables are those you define by
19053b57fe0aSwdenk		simply typing `name=value'. To access a local
1906c609719bSwdenk		variable later on, you have write `$name' or
19073b57fe0aSwdenk		`${name}'; to execute the contents of a variable
19083b57fe0aSwdenk		directly type `$name' at the command prompt.
1909c609719bSwdenk
1910c609719bSwdenk		Global environment variables are those you use
1911c609719bSwdenk		setenv/printenv to work with. To run a command stored
1912c609719bSwdenk		in such a variable, you need to use the run command,
1913c609719bSwdenk		and you must not use the '$' sign to access them.
1914c609719bSwdenk
1915c609719bSwdenk		To store commands and special characters in a
1916c609719bSwdenk		variable, please use double quotation marks
1917c609719bSwdenk		surrounding the whole text of the variable, instead
1918c609719bSwdenk		of the backslashes before semicolons and special
1919c609719bSwdenk		symbols.
1920c609719bSwdenk
1921aa0c71acSWolfgang Denk- Commandline Editing and History:
1922aa0c71acSWolfgang Denk		CONFIG_CMDLINE_EDITING
1923aa0c71acSWolfgang Denk
192411ccc33fSMarcel Ziswiler		Enable editing and History functions for interactive
1925aa0c71acSWolfgang Denk		commandline input operations
1926aa0c71acSWolfgang Denk
1927a8c7c708Swdenk- Default Environment:
1928c609719bSwdenk		CONFIG_EXTRA_ENV_SETTINGS
1929c609719bSwdenk
1930c609719bSwdenk		Define this to contain any number of null terminated
1931c609719bSwdenk		strings (variable = value pairs) that will be part of
19327152b1d0Swdenk		the default environment compiled into the boot image.
19332262cfeeSwdenk
1934c609719bSwdenk		For example, place something like this in your
1935c609719bSwdenk		board's config file:
1936c609719bSwdenk
1937c609719bSwdenk		#define CONFIG_EXTRA_ENV_SETTINGS \
1938c609719bSwdenk			"myvar1=value1\0" \
1939c609719bSwdenk			"myvar2=value2\0"
1940c609719bSwdenk
1941c609719bSwdenk		Warning: This method is based on knowledge about the
1942c609719bSwdenk		internal format how the environment is stored by the
19432262cfeeSwdenk		U-Boot code. This is NOT an official, exported
1944c609719bSwdenk		interface! Although it is unlikely that this format
19457152b1d0Swdenk		will change soon, there is no guarantee either.
1946c609719bSwdenk		You better know what you are doing here.
1947c609719bSwdenk
1948c609719bSwdenk		Note: overly (ab)use of the default environment is
1949c609719bSwdenk		discouraged. Make sure to check other ways to preset
195074de7aefSWolfgang Denk		the environment like the "source" command or the
1951c609719bSwdenk		boot command first.
1952c609719bSwdenk
1953a8c7c708Swdenk- DataFlash Support:
19542abbe075Swdenk		CONFIG_HAS_DATAFLASH
19552abbe075Swdenk
19562abbe075Swdenk		Defining this option enables DataFlash features and
19572abbe075Swdenk		allows to read/write in Dataflash via the standard
19582abbe075Swdenk		commands cp, md...
19592abbe075Swdenk
19603f85ce27Swdenk- SystemACE Support:
19613f85ce27Swdenk		CONFIG_SYSTEMACE
19623f85ce27Swdenk
19633f85ce27Swdenk		Adding this option adds support for Xilinx SystemACE
19643f85ce27Swdenk		chips attached via some sort of local bus. The address
196511ccc33fSMarcel Ziswiler		of the chip must also be defined in the
19666d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_SYSTEMACE_BASE macro. For example:
19673f85ce27Swdenk
19683f85ce27Swdenk		#define CONFIG_SYSTEMACE
19696d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		#define CONFIG_SYS_SYSTEMACE_BASE 0xf0000000
19703f85ce27Swdenk
19713f85ce27Swdenk		When SystemACE support is added, the "ace" device type
19723f85ce27Swdenk		becomes available to the fat commands, i.e. fatls.
19733f85ce27Swdenk
1974ecb0ccd9SWolfgang Denk- TFTP Fixed UDP Port:
1975ecb0ccd9SWolfgang Denk		CONFIG_TFTP_PORT
1976ecb0ccd9SWolfgang Denk
197728cb9375SWolfgang Denk		If this is defined, the environment variable tftpsrcp
1978ecb0ccd9SWolfgang Denk		is used to supply the TFTP UDP source port value.
197928cb9375SWolfgang Denk		If tftpsrcp isn't defined, the normal pseudo-random port
1980ecb0ccd9SWolfgang Denk		number generator is used.
1981ecb0ccd9SWolfgang Denk
198228cb9375SWolfgang Denk		Also, the environment variable tftpdstp is used to supply
198328cb9375SWolfgang Denk		the TFTP UDP destination port value.  If tftpdstp isn't
198428cb9375SWolfgang Denk		defined, the normal port 69 is used.
198528cb9375SWolfgang Denk
198628cb9375SWolfgang Denk		The purpose for tftpsrcp is to allow a TFTP server to
1987ecb0ccd9SWolfgang Denk		blindly start the TFTP transfer using the pre-configured
1988ecb0ccd9SWolfgang Denk		target IP address and UDP port. This has the effect of
1989ecb0ccd9SWolfgang Denk		"punching through" the (Windows XP) firewall, allowing
1990ecb0ccd9SWolfgang Denk		the remainder of the TFTP transfer to proceed normally.
1991ecb0ccd9SWolfgang Denk		A better solution is to properly configure the firewall,
1992ecb0ccd9SWolfgang Denk		but sometimes that is not allowed.
1993ecb0ccd9SWolfgang Denk
1994a8c7c708Swdenk- Show boot progress:
1995c609719bSwdenk		CONFIG_SHOW_BOOT_PROGRESS
1996c609719bSwdenk
1997c609719bSwdenk		Defining this option allows to add some board-
1998c609719bSwdenk		specific code (calling a user-provided function
1999c609719bSwdenk		"show_boot_progress(int)") that enables you to show
2000c609719bSwdenk		the system's boot progress on some display (for
2001c609719bSwdenk		example, some LED's) on your board. At the moment,
2002c609719bSwdenk		the following checkpoints are implemented:
2003c609719bSwdenk
20048ae86b76SWolfgang Denk- Standalone program support:
20058ae86b76SWolfgang Denk		CONFIG_STANDALONE_LOAD_ADDR
20068ae86b76SWolfgang Denk
20078ae86b76SWolfgang Denk		This option allows to define board specific values
20088ae86b76SWolfgang Denk		for the address where standalone program gets loaded,
20098ae86b76SWolfgang Denk		thus overwriting the architecutre dependent default
20108ae86b76SWolfgang Denk		settings.
20118ae86b76SWolfgang Denk
2012d32a1a4cSMinkyu Kang- Frame Buffer Address:
2013d32a1a4cSMinkyu Kang	CONFIG_FB_ADDR
2014d32a1a4cSMinkyu Kang
2015d32a1a4cSMinkyu Kang	Define CONFIG_FB_ADDR if you want to use specific address for
2016d32a1a4cSMinkyu Kang	frame buffer.
2017d32a1a4cSMinkyu Kang	Then system will reserve the frame buffer address to defined address
2018d32a1a4cSMinkyu Kang	instead of lcd_setmem (this function grab the memory for frame buffer
2019d32a1a4cSMinkyu Kang	by panel's size).
2020d32a1a4cSMinkyu Kang
2021d32a1a4cSMinkyu Kang	Please see board_init_f function.
2022d32a1a4cSMinkyu Kang
2023d32a1a4cSMinkyu Kang	If you want this config option then,
2024d32a1a4cSMinkyu Kang	please define it at your board config file
2025d32a1a4cSMinkyu Kang
20261372cce2SMarian BalakowiczLegacy uImage format:
20271372cce2SMarian Balakowicz
2028c609719bSwdenk  Arg	Where			When
2029c609719bSwdenk    1	common/cmd_bootm.c	before attempting to boot an image
2030c609719bSwdenk   -1	common/cmd_bootm.c	Image header has bad	 magic number
2031c609719bSwdenk    2	common/cmd_bootm.c	Image header has correct magic number
2032c609719bSwdenk   -2	common/cmd_bootm.c	Image header has bad	 checksum
2033c609719bSwdenk    3	common/cmd_bootm.c	Image header has correct checksum
2034c609719bSwdenk   -3	common/cmd_bootm.c	Image data   has bad	 checksum
2035c609719bSwdenk    4	common/cmd_bootm.c	Image data   has correct checksum
2036c609719bSwdenk   -4	common/cmd_bootm.c	Image is for unsupported architecture
2037c609719bSwdenk    5	common/cmd_bootm.c	Architecture check OK
20381372cce2SMarian Balakowicz   -5	common/cmd_bootm.c	Wrong Image Type (not kernel, multi)
2039c609719bSwdenk    6	common/cmd_bootm.c	Image Type check OK
2040c609719bSwdenk   -6	common/cmd_bootm.c	gunzip uncompression error
2041c609719bSwdenk   -7	common/cmd_bootm.c	Unimplemented compression type
2042c609719bSwdenk    7	common/cmd_bootm.c	Uncompression OK
20431372cce2SMarian Balakowicz    8	common/cmd_bootm.c	No uncompress/copy overwrite error
2044c609719bSwdenk   -9	common/cmd_bootm.c	Unsupported OS (not Linux, BSD, VxWorks, QNX)
20451372cce2SMarian Balakowicz
20461372cce2SMarian Balakowicz    9	common/image.c		Start initial ramdisk verification
20471372cce2SMarian Balakowicz  -10	common/image.c		Ramdisk header has bad	   magic number
20481372cce2SMarian Balakowicz  -11	common/image.c		Ramdisk header has bad	   checksum
20491372cce2SMarian Balakowicz   10	common/image.c		Ramdisk header is OK
20501372cce2SMarian Balakowicz  -12	common/image.c		Ramdisk data   has bad	   checksum
20511372cce2SMarian Balakowicz   11	common/image.c		Ramdisk data   has correct checksum
20521372cce2SMarian Balakowicz   12	common/image.c		Ramdisk verification complete, start loading
205311ccc33fSMarcel Ziswiler  -13	common/image.c		Wrong Image Type (not PPC Linux ramdisk)
20541372cce2SMarian Balakowicz   13	common/image.c		Start multifile image verification
20551372cce2SMarian Balakowicz   14	common/image.c		No initial ramdisk, no multifile, continue.
20561372cce2SMarian Balakowicz
2057ea0364f1SPeter Tyser   15	arch/<arch>/lib/bootm.c	All preparation done, transferring control to OS
2058c609719bSwdenk
2059a47a12beSStefan Roese  -30	arch/powerpc/lib/board.c	Fatal error, hang the system
206063e73c9aSwdenk  -31	post/post.c		POST test failed, detected by post_output_backlog()
206163e73c9aSwdenk  -32	post/post.c		POST test failed, detected by post_run_single()
206263e73c9aSwdenk
2063566a494fSHeiko Schocher   34	common/cmd_doc.c	before loading a Image from a DOC device
2064566a494fSHeiko Schocher  -35	common/cmd_doc.c	Bad usage of "doc" command
2065566a494fSHeiko Schocher   35	common/cmd_doc.c	correct usage of "doc" command
2066566a494fSHeiko Schocher  -36	common/cmd_doc.c	No boot device
2067566a494fSHeiko Schocher   36	common/cmd_doc.c	correct boot device
2068566a494fSHeiko Schocher  -37	common/cmd_doc.c	Unknown Chip ID on boot device
2069566a494fSHeiko Schocher   37	common/cmd_doc.c	correct chip ID found, device available
2070566a494fSHeiko Schocher  -38	common/cmd_doc.c	Read Error on boot device
2071566a494fSHeiko Schocher   38	common/cmd_doc.c	reading Image header from DOC device OK
2072566a494fSHeiko Schocher  -39	common/cmd_doc.c	Image header has bad magic number
2073566a494fSHeiko Schocher   39	common/cmd_doc.c	Image header has correct magic number
2074566a494fSHeiko Schocher  -40	common/cmd_doc.c	Error reading Image from DOC device
2075566a494fSHeiko Schocher   40	common/cmd_doc.c	Image header has correct magic number
2076566a494fSHeiko Schocher   41	common/cmd_ide.c	before loading a Image from a IDE device
2077566a494fSHeiko Schocher  -42	common/cmd_ide.c	Bad usage of "ide" command
2078566a494fSHeiko Schocher   42	common/cmd_ide.c	correct usage of "ide" command
2079566a494fSHeiko Schocher  -43	common/cmd_ide.c	No boot device
2080566a494fSHeiko Schocher   43	common/cmd_ide.c	boot device found
2081566a494fSHeiko Schocher  -44	common/cmd_ide.c	Device not available
2082566a494fSHeiko Schocher   44	common/cmd_ide.c	Device available
2083566a494fSHeiko Schocher  -45	common/cmd_ide.c	wrong partition selected
2084566a494fSHeiko Schocher   45	common/cmd_ide.c	partition selected
2085566a494fSHeiko Schocher  -46	common/cmd_ide.c	Unknown partition table
2086566a494fSHeiko Schocher   46	common/cmd_ide.c	valid partition table found
2087566a494fSHeiko Schocher  -47	common/cmd_ide.c	Invalid partition type
2088566a494fSHeiko Schocher   47	common/cmd_ide.c	correct partition type
2089566a494fSHeiko Schocher  -48	common/cmd_ide.c	Error reading Image Header on boot device
2090566a494fSHeiko Schocher   48	common/cmd_ide.c	reading Image Header from IDE device OK
2091566a494fSHeiko Schocher  -49	common/cmd_ide.c	Image header has bad magic number
2092566a494fSHeiko Schocher   49	common/cmd_ide.c	Image header has correct magic number
2093566a494fSHeiko Schocher  -50	common/cmd_ide.c	Image header has bad	 checksum
2094566a494fSHeiko Schocher   50	common/cmd_ide.c	Image header has correct checksum
2095566a494fSHeiko Schocher  -51	common/cmd_ide.c	Error reading Image from IDE device
2096566a494fSHeiko Schocher   51	common/cmd_ide.c	reading Image from IDE device OK
2097566a494fSHeiko Schocher   52	common/cmd_nand.c	before loading a Image from a NAND device
2098566a494fSHeiko Schocher  -53	common/cmd_nand.c	Bad usage of "nand" command
2099566a494fSHeiko Schocher   53	common/cmd_nand.c	correct usage of "nand" command
2100566a494fSHeiko Schocher  -54	common/cmd_nand.c	No boot device
2101566a494fSHeiko Schocher   54	common/cmd_nand.c	boot device found
2102566a494fSHeiko Schocher  -55	common/cmd_nand.c	Unknown Chip ID on boot device
2103566a494fSHeiko Schocher   55	common/cmd_nand.c	correct chip ID found, device available
2104566a494fSHeiko Schocher  -56	common/cmd_nand.c	Error reading Image Header on boot device
2105566a494fSHeiko Schocher   56	common/cmd_nand.c	reading Image Header from NAND device OK
2106566a494fSHeiko Schocher  -57	common/cmd_nand.c	Image header has bad magic number
2107566a494fSHeiko Schocher   57	common/cmd_nand.c	Image header has correct magic number
2108566a494fSHeiko Schocher  -58	common/cmd_nand.c	Error reading Image from NAND device
2109566a494fSHeiko Schocher   58	common/cmd_nand.c	reading Image from NAND device OK
2110c609719bSwdenk
2111566a494fSHeiko Schocher  -60	common/env_common.c	Environment has a bad CRC, using default
2112c609719bSwdenk
2113566a494fSHeiko Schocher   64	net/eth.c		starting with Ethernet configuration.
2114566a494fSHeiko Schocher  -64	net/eth.c		no Ethernet found.
2115566a494fSHeiko Schocher   65	net/eth.c		Ethernet found.
2116206c60cbSwdenk
2117566a494fSHeiko Schocher  -80	common/cmd_net.c	usage wrong
2118566a494fSHeiko Schocher   80	common/cmd_net.c	before calling NetLoop()
211911ccc33fSMarcel Ziswiler  -81	common/cmd_net.c	some error in NetLoop() occurred
2120566a494fSHeiko Schocher   81	common/cmd_net.c	NetLoop() back without error
2121566a494fSHeiko Schocher  -82	common/cmd_net.c	size == 0 (File with size 0 loaded)
2122566a494fSHeiko Schocher   82	common/cmd_net.c	trying automatic boot
212374de7aefSWolfgang Denk   83	common/cmd_net.c	running "source" command
212474de7aefSWolfgang Denk  -83	common/cmd_net.c	some error in automatic boot or "source" command
2125566a494fSHeiko Schocher   84	common/cmd_net.c	end without errors
2126c609719bSwdenk
21271372cce2SMarian BalakowiczFIT uImage format:
21281372cce2SMarian Balakowicz
21291372cce2SMarian Balakowicz  Arg	Where			When
21301372cce2SMarian Balakowicz  100	common/cmd_bootm.c	Kernel FIT Image has correct format
21311372cce2SMarian Balakowicz -100	common/cmd_bootm.c	Kernel FIT Image has incorrect format
21321372cce2SMarian Balakowicz  101	common/cmd_bootm.c	No Kernel subimage unit name, using configuration
21331372cce2SMarian Balakowicz -101	common/cmd_bootm.c	Can't get configuration for kernel subimage
21341372cce2SMarian Balakowicz  102	common/cmd_bootm.c	Kernel unit name specified
21351372cce2SMarian Balakowicz -103	common/cmd_bootm.c	Can't get kernel subimage node offset
2136f773bea8SMarian Balakowicz  103	common/cmd_bootm.c	Found configuration node
21371372cce2SMarian Balakowicz  104	common/cmd_bootm.c	Got kernel subimage node offset
21381372cce2SMarian Balakowicz -104	common/cmd_bootm.c	Kernel subimage hash verification failed
21391372cce2SMarian Balakowicz  105	common/cmd_bootm.c	Kernel subimage hash verification OK
21401372cce2SMarian Balakowicz -105	common/cmd_bootm.c	Kernel subimage is for unsupported architecture
21411372cce2SMarian Balakowicz  106	common/cmd_bootm.c	Architecture check OK
214211ccc33fSMarcel Ziswiler -106	common/cmd_bootm.c	Kernel subimage has wrong type
214311ccc33fSMarcel Ziswiler  107	common/cmd_bootm.c	Kernel subimage type OK
21441372cce2SMarian Balakowicz -107	common/cmd_bootm.c	Can't get kernel subimage data/size
21451372cce2SMarian Balakowicz  108	common/cmd_bootm.c	Got kernel subimage data/size
21461372cce2SMarian Balakowicz -108	common/cmd_bootm.c	Wrong image type (not legacy, FIT)
21471372cce2SMarian Balakowicz -109	common/cmd_bootm.c	Can't get kernel subimage type
21481372cce2SMarian Balakowicz -110	common/cmd_bootm.c	Can't get kernel subimage comp
21491372cce2SMarian Balakowicz -111	common/cmd_bootm.c	Can't get kernel subimage os
21501372cce2SMarian Balakowicz -112	common/cmd_bootm.c	Can't get kernel subimage load address
21511372cce2SMarian Balakowicz -113	common/cmd_bootm.c	Image uncompress/copy overwrite error
21521372cce2SMarian Balakowicz
21531372cce2SMarian Balakowicz  120	common/image.c		Start initial ramdisk verification
21541372cce2SMarian Balakowicz -120	common/image.c		Ramdisk FIT image has incorrect format
21551372cce2SMarian Balakowicz  121	common/image.c		Ramdisk FIT image has correct format
215611ccc33fSMarcel Ziswiler  122	common/image.c		No ramdisk subimage unit name, using configuration
21571372cce2SMarian Balakowicz -122	common/image.c		Can't get configuration for ramdisk subimage
21581372cce2SMarian Balakowicz  123	common/image.c		Ramdisk unit name specified
21591372cce2SMarian Balakowicz -124	common/image.c		Can't get ramdisk subimage node offset
21601372cce2SMarian Balakowicz  125	common/image.c		Got ramdisk subimage node offset
21611372cce2SMarian Balakowicz -125	common/image.c		Ramdisk subimage hash verification failed
21621372cce2SMarian Balakowicz  126	common/image.c		Ramdisk subimage hash verification OK
21631372cce2SMarian Balakowicz -126	common/image.c		Ramdisk subimage for unsupported architecture
21641372cce2SMarian Balakowicz  127	common/image.c		Architecture check OK
21651372cce2SMarian Balakowicz -127	common/image.c		Can't get ramdisk subimage data/size
21661372cce2SMarian Balakowicz  128	common/image.c		Got ramdisk subimage data/size
21671372cce2SMarian Balakowicz  129	common/image.c		Can't get ramdisk load address
21681372cce2SMarian Balakowicz -129	common/image.c		Got ramdisk load address
21691372cce2SMarian Balakowicz
217011ccc33fSMarcel Ziswiler -130	common/cmd_doc.c	Incorrect FIT image format
21711372cce2SMarian Balakowicz  131	common/cmd_doc.c	FIT image format OK
21721372cce2SMarian Balakowicz
217311ccc33fSMarcel Ziswiler -140	common/cmd_ide.c	Incorrect FIT image format
21741372cce2SMarian Balakowicz  141	common/cmd_ide.c	FIT image format OK
21751372cce2SMarian Balakowicz
217611ccc33fSMarcel Ziswiler -150	common/cmd_nand.c	Incorrect FIT image format
21771372cce2SMarian Balakowicz  151	common/cmd_nand.c	FIT image format OK
21781372cce2SMarian Balakowicz
2179cccfc2abSDetlev Zundel- Automatic software updates via TFTP server
2180cccfc2abSDetlev Zundel		CONFIG_UPDATE_TFTP
2181cccfc2abSDetlev Zundel		CONFIG_UPDATE_TFTP_CNT_MAX
2182cccfc2abSDetlev Zundel		CONFIG_UPDATE_TFTP_MSEC_MAX
2183cccfc2abSDetlev Zundel
2184cccfc2abSDetlev Zundel		These options enable and control the auto-update feature;
2185cccfc2abSDetlev Zundel		for a more detailed description refer to doc/README.update.
2186cccfc2abSDetlev Zundel
2187cccfc2abSDetlev Zundel- MTD Support (mtdparts command, UBI support)
2188cccfc2abSDetlev Zundel		CONFIG_MTD_DEVICE
2189cccfc2abSDetlev Zundel
2190cccfc2abSDetlev Zundel		Adds the MTD device infrastructure from the Linux kernel.
2191cccfc2abSDetlev Zundel		Needed for mtdparts command support.
2192cccfc2abSDetlev Zundel
2193cccfc2abSDetlev Zundel		CONFIG_MTD_PARTITIONS
2194cccfc2abSDetlev Zundel
2195cccfc2abSDetlev Zundel		Adds the MTD partitioning infrastructure from the Linux
2196cccfc2abSDetlev Zundel		kernel. Needed for UBI support.
2197cccfc2abSDetlev Zundel
21981372cce2SMarian Balakowicz
2199c609719bSwdenkModem Support:
2200c609719bSwdenk--------------
2201c609719bSwdenk
220285ec0bccSwdenk[so far only for SMDK2400 and TRAB boards]
2203c609719bSwdenk
220411ccc33fSMarcel Ziswiler- Modem support enable:
2205c609719bSwdenk		CONFIG_MODEM_SUPPORT
2206c609719bSwdenk
2207c609719bSwdenk- RTS/CTS Flow control enable:
2208c609719bSwdenk		CONFIG_HWFLOW
2209c609719bSwdenk
2210c609719bSwdenk- Modem debug support:
2211c609719bSwdenk		CONFIG_MODEM_SUPPORT_DEBUG
2212c609719bSwdenk
2213c609719bSwdenk		Enables debugging stuff (char screen[1024], dbg())
2214c609719bSwdenk		for modem support. Useful only with BDI2000.
2215c609719bSwdenk
2216a8c7c708Swdenk- Interrupt support (PPC):
2217a8c7c708Swdenk
2218a8c7c708Swdenk		There are common interrupt_init() and timer_interrupt()
2219a8c7c708Swdenk		for all PPC archs. interrupt_init() calls interrupt_init_cpu()
222011ccc33fSMarcel Ziswiler		for CPU specific initialization. interrupt_init_cpu()
2221a8c7c708Swdenk		should set decrementer_count to appropriate value. If
222211ccc33fSMarcel Ziswiler		CPU resets decrementer automatically after interrupt
2223a8c7c708Swdenk		(ppc4xx) it should set decrementer_count to zero.
222411ccc33fSMarcel Ziswiler		timer_interrupt() calls timer_interrupt_cpu() for CPU
2225a8c7c708Swdenk		specific handling. If board has watchdog / status_led
2226a8c7c708Swdenk		/ other_activity_monitor it works automatically from
2227a8c7c708Swdenk		general timer_interrupt().
2228a8c7c708Swdenk
2229c609719bSwdenk- General:
2230c609719bSwdenk
2231c609719bSwdenk		In the target system modem support is enabled when a
2232c609719bSwdenk		specific key (key combination) is pressed during
2233c609719bSwdenk		power-on. Otherwise U-Boot will boot normally
223411ccc33fSMarcel Ziswiler		(autoboot). The key_pressed() function is called from
2235c609719bSwdenk		board_init(). Currently key_pressed() is a dummy
2236c609719bSwdenk		function, returning 1 and thus enabling modem
2237c609719bSwdenk		initialization.
2238c609719bSwdenk
2239c609719bSwdenk		If there are no modem init strings in the
2240c609719bSwdenk		environment, U-Boot proceed to autoboot; the
2241c609719bSwdenk		previous output (banner, info printfs) will be
224211ccc33fSMarcel Ziswiler		suppressed, though.
2243c609719bSwdenk
2244c609719bSwdenk		See also: doc/README.Modem
2245c609719bSwdenk
2246c609719bSwdenk
2247c609719bSwdenkConfiguration Settings:
2248c609719bSwdenk-----------------------
2249c609719bSwdenk
22506d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_LONGHELP: Defined when you want long help messages included;
2251c609719bSwdenk		undefine this when you're short of memory.
2252c609719bSwdenk
22532fb2604dSPeter Tyser- CONFIG_SYS_HELP_CMD_WIDTH: Defined when you want to override the default
22542fb2604dSPeter Tyser		width of the commands listed in the 'help' command output.
22552fb2604dSPeter Tyser
22566d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PROMPT:	This is what U-Boot prints on the console to
2257c609719bSwdenk		prompt for user input.
2258c609719bSwdenk
22596d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CBSIZE:	Buffer size for input from the Console
2260c609719bSwdenk
22616d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PBSIZE:	Buffer size for Console output
2262c609719bSwdenk
22636d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAXARGS:	max. Number of arguments accepted for monitor commands
2264c609719bSwdenk
22656d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_BARGSIZE: Buffer size for Boot Arguments which are passed to
2266c609719bSwdenk		the application (usually a Linux kernel) when it is
2267c609719bSwdenk		booted
2268c609719bSwdenk
22696d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_BAUDRATE_TABLE:
2270c609719bSwdenk		List of legal baudrate settings for this board.
2271c609719bSwdenk
22726d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CONSOLE_INFO_QUIET
2273c609719bSwdenk		Suppress display of console information at boot.
2274c609719bSwdenk
22756d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CONSOLE_IS_IN_ENV
2276c609719bSwdenk		If the board specific function
2277c609719bSwdenk			extern int overwrite_console (void);
2278c609719bSwdenk		returns 1, the stdin, stderr and stdout are switched to the
2279c609719bSwdenk		serial port, else the settings in the environment are used.
2280c609719bSwdenk
22816d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
2282c609719bSwdenk		Enable the call to overwrite_console().
2283c609719bSwdenk
22846d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CONSOLE_ENV_OVERWRITE
2285c609719bSwdenk		Enable overwrite of previous console environment settings.
2286c609719bSwdenk
22876d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END:
2288c609719bSwdenk		Begin and End addresses of the area used by the
2289c609719bSwdenk		simple memory test.
2290c609719bSwdenk
22916d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_ALT_MEMTEST:
2292c609719bSwdenk		Enable an alternate, more extensive memory test.
2293c609719bSwdenk
22946d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MEMTEST_SCRATCH:
22955f535fe1Swdenk		Scratch address used by the alternate memory test
22965f535fe1Swdenk		You only need to set this if address zero isn't writeable
22975f535fe1Swdenk
22986d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MEM_TOP_HIDE (PPC only):
22996d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		If CONFIG_SYS_MEM_TOP_HIDE is defined in the board config header,
230014f73ca6SStefan Roese		this specified memory area will get subtracted from the top
230111ccc33fSMarcel Ziswiler		(end) of RAM and won't get "touched" at all by U-Boot. By
230214f73ca6SStefan Roese		fixing up gd->ram_size the Linux kernel should gets passed
230314f73ca6SStefan Roese		the now "corrected" memory size and won't touch it either.
230414f73ca6SStefan Roese		This should work for arch/ppc and arch/powerpc. Only Linux
23055e12e75dSStefan Roese		board ports in arch/powerpc with bootwrapper support that
230614f73ca6SStefan Roese		recalculate the memory size from the SDRAM controller setup
23075e12e75dSStefan Roese		will have to get fixed in Linux additionally.
230814f73ca6SStefan Roese
230914f73ca6SStefan Roese		This option can be used as a workaround for the 440EPx/GRx
231014f73ca6SStefan Roese		CHIP 11 errata where the last 256 bytes in SDRAM shouldn't
231114f73ca6SStefan Roese		be touched.
231214f73ca6SStefan Roese
231314f73ca6SStefan Roese		WARNING: Please make sure that this value is a multiple of
231414f73ca6SStefan Roese		the Linux page size (normally 4k). If this is not the case,
231514f73ca6SStefan Roese		then the end address of the Linux memory will be located at a
231614f73ca6SStefan Roese		non page size aligned address and this could cause major
231714f73ca6SStefan Roese		problems.
231814f73ca6SStefan Roese
23196d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_TFTP_LOADADDR:
2320c609719bSwdenk		Default load address for network file downloads
2321c609719bSwdenk
23226d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_LOADS_BAUD_CHANGE:
2323c609719bSwdenk		Enable temporary baudrate change while serial download
2324c609719bSwdenk
23256d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SDRAM_BASE:
2326c609719bSwdenk		Physical start address of SDRAM. _Must_ be 0 here.
2327c609719bSwdenk
23286d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MBIO_BASE:
2329c609719bSwdenk		Physical start address of Motherboard I/O (if using a
2330c609719bSwdenk		Cogent motherboard)
2331c609719bSwdenk
23326d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_BASE:
2333c609719bSwdenk		Physical start address of Flash memory.
2334c609719bSwdenk
23356d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MONITOR_BASE:
2336c609719bSwdenk		Physical start address of boot monitor code (set by
2337c609719bSwdenk		make config files to be same as the text base address
233814d0a02aSWolfgang Denk		(CONFIG_SYS_TEXT_BASE) used when linking) - same as
23396d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_FLASH_BASE when booting from flash.
2340c609719bSwdenk
23416d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MONITOR_LEN:
23423b57fe0aSwdenk		Size of memory reserved for monitor code, used to
23433b57fe0aSwdenk		determine _at_compile_time_ (!) if the environment is
23443b57fe0aSwdenk		embedded within the U-Boot image, or in a separate
23453b57fe0aSwdenk		flash sector.
2346c609719bSwdenk
23476d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MALLOC_LEN:
2348c609719bSwdenk		Size of DRAM reserved for malloc() use.
2349c609719bSwdenk
23506d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_BOOTM_LEN:
235115940c9aSStefan Roese		Normally compressed uImages are limited to an
235215940c9aSStefan Roese		uncompressed size of 8 MBytes. If this is not enough,
23536d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		you can define CONFIG_SYS_BOOTM_LEN in your board config file
235415940c9aSStefan Roese		to adjust this setting to your needs.
2355c609719bSwdenk
23566d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_BOOTMAPSZ:
2357c609719bSwdenk		Maximum size of memory mapped by the startup code of
2358c609719bSwdenk		the Linux kernel; all data that must be processed by
23597d721e34SBartlomiej Sieka		the Linux kernel (bd_info, boot arguments, FDT blob if
23607d721e34SBartlomiej Sieka		used) must be put below this limit, unless "bootm_low"
23617d721e34SBartlomiej Sieka		enviroment variable is defined and non-zero. In such case
23627d721e34SBartlomiej Sieka		all data for the Linux kernel must be between "bootm_low"
2363c3624e6eSGrant Likely		and "bootm_low" + CONFIG_SYS_BOOTMAPSZ.  The environment
2364c3624e6eSGrant Likely		variable "bootm_mapsize" will override the value of
2365c3624e6eSGrant Likely		CONFIG_SYS_BOOTMAPSZ.  If CONFIG_SYS_BOOTMAPSZ is undefined,
2366c3624e6eSGrant Likely		then the value in "bootm_size" will be used instead.
2367c609719bSwdenk
2368fca43cc8SJohn Rigby- CONFIG_SYS_BOOT_RAMDISK_HIGH:
2369fca43cc8SJohn Rigby		Enable initrd_high functionality.  If defined then the
2370fca43cc8SJohn Rigby		initrd_high feature is enabled and the bootm ramdisk subcommand
2371fca43cc8SJohn Rigby		is enabled.
2372fca43cc8SJohn Rigby
2373fca43cc8SJohn Rigby- CONFIG_SYS_BOOT_GET_CMDLINE:
2374fca43cc8SJohn Rigby		Enables allocating and saving kernel cmdline in space between
2375fca43cc8SJohn Rigby		"bootm_low" and "bootm_low" + BOOTMAPSZ.
2376fca43cc8SJohn Rigby
2377fca43cc8SJohn Rigby- CONFIG_SYS_BOOT_GET_KBD:
2378fca43cc8SJohn Rigby		Enables allocating and saving a kernel copy of the bd_info in
2379fca43cc8SJohn Rigby		space between "bootm_low" and "bootm_low" + BOOTMAPSZ.
2380fca43cc8SJohn Rigby
23816d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAX_FLASH_BANKS:
2382c609719bSwdenk		Max number of Flash memory banks
2383c609719bSwdenk
23846d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAX_FLASH_SECT:
2385c609719bSwdenk		Max number of sectors on a Flash chip
2386c609719bSwdenk
23876d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_ERASE_TOUT:
2388c609719bSwdenk		Timeout for Flash erase operations (in ms)
2389c609719bSwdenk
23906d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_WRITE_TOUT:
2391c609719bSwdenk		Timeout for Flash write operations (in ms)
2392c609719bSwdenk
23936d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_LOCK_TOUT
23948564acf9Swdenk		Timeout for Flash set sector lock bit operation (in ms)
23958564acf9Swdenk
23966d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_UNLOCK_TOUT
23978564acf9Swdenk		Timeout for Flash clear lock bits operation (in ms)
23988564acf9Swdenk
23996d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_PROTECTION
24008564acf9Swdenk		If defined, hardware flash sectors protection is used
24018564acf9Swdenk		instead of U-Boot software protection.
24028564acf9Swdenk
24036d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_DIRECT_FLASH_TFTP:
2404c609719bSwdenk
2405c609719bSwdenk		Enable TFTP transfers directly to flash memory;
2406c609719bSwdenk		without this option such a download has to be
2407c609719bSwdenk		performed in two steps: (1) download to RAM, and (2)
2408c609719bSwdenk		copy from RAM to flash.
2409c609719bSwdenk
2410c609719bSwdenk		The two-step approach is usually more reliable, since
2411c609719bSwdenk		you can check if the download worked before you erase
241211ccc33fSMarcel Ziswiler		the flash, but in some situations (when system RAM is
241311ccc33fSMarcel Ziswiler		too limited to allow for a temporary copy of the
2414c609719bSwdenk		downloaded image) this option may be very useful.
2415c609719bSwdenk
24166d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_CFI:
2417c609719bSwdenk		Define if the flash driver uses extra elements in the
24185653fc33Swdenk		common flash structure for storing flash geometry.
24195653fc33Swdenk
242000b1883aSJean-Christophe PLAGNIOL-VILLARD- CONFIG_FLASH_CFI_DRIVER
24215653fc33Swdenk		This option also enables the building of the cfi_flash driver
24225653fc33Swdenk		in the drivers directory
242353cf9435Sstroese
242491809ed5SPiotr Ziecik- CONFIG_FLASH_CFI_MTD
242591809ed5SPiotr Ziecik		This option enables the building of the cfi_mtd driver
242691809ed5SPiotr Ziecik		in the drivers directory. The driver exports CFI flash
242791809ed5SPiotr Ziecik		to the MTD layer.
242891809ed5SPiotr Ziecik
24296d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_USE_BUFFER_WRITE
243096ef831fSGuennadi Liakhovetski		Use buffered writes to flash.
243196ef831fSGuennadi Liakhovetski
243296ef831fSGuennadi Liakhovetski- CONFIG_FLASH_SPANSION_S29WS_N
243396ef831fSGuennadi Liakhovetski		s29ws-n MirrorBit flash has non-standard addresses for buffered
243496ef831fSGuennadi Liakhovetski		write commands.
243596ef831fSGuennadi Liakhovetski
24366d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FLASH_QUIET_TEST
24375568e613SStefan Roese		If this option is defined, the common CFI flash doesn't
24385568e613SStefan Roese		print it's warning upon not recognized FLASH banks. This
24395568e613SStefan Roese		is useful, if some of the configured banks are only
24405568e613SStefan Roese		optionally available.
24415568e613SStefan Roese
24429a042e9cSJerry Van Baren- CONFIG_FLASH_SHOW_PROGRESS
24439a042e9cSJerry Van Baren		If defined (must be an integer), print out countdown
24449a042e9cSJerry Van Baren		digits and dots.  Recommended value: 45 (9..1) for 80
24459a042e9cSJerry Van Baren		column displays, 15 (3..1) for 40 column displays.
24469a042e9cSJerry Van Baren
24476d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_RX_ETH_BUFFER:
244811ccc33fSMarcel Ziswiler		Defines the number of Ethernet receive buffers. On some
244911ccc33fSMarcel Ziswiler		Ethernet controllers it is recommended to set this value
245053cf9435Sstroese		to 8 or even higher (EEPRO100 or 405 EMAC), since all
245153cf9435Sstroese		buffers can be full shortly after enabling the interface
245211ccc33fSMarcel Ziswiler		on high Ethernet traffic.
245353cf9435Sstroese		Defaults to 4 if not defined.
2454c609719bSwdenk
2455ea882bafSWolfgang Denk- CONFIG_ENV_MAX_ENTRIES
2456ea882bafSWolfgang Denk
2457ea882bafSWolfgang Denk	Maximum number of entries in the hash table that is used
2458ea882bafSWolfgang Denk	internally to store the environment settings. The default
2459ea882bafSWolfgang Denk	setting is supposed to be generous and should work in most
2460ea882bafSWolfgang Denk	cases. This setting can be used to tune behaviour; see
2461ea882bafSWolfgang Denk	lib/hashtable.c for details.
2462ea882bafSWolfgang Denk
2463c609719bSwdenkThe following definitions that deal with the placement and management
2464c609719bSwdenkof environment data (variable area); in general, we support the
2465c609719bSwdenkfollowing configurations:
2466c609719bSwdenk
24675a1aceb0SJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_FLASH:
2468c609719bSwdenk
2469c609719bSwdenk	Define this if the environment is in flash memory.
2470c609719bSwdenk
2471c609719bSwdenk	a) The environment occupies one whole flash sector, which is
2472c609719bSwdenk	   "embedded" in the text segment with the U-Boot code. This
2473c609719bSwdenk	   happens usually with "bottom boot sector" or "top boot
2474c609719bSwdenk	   sector" type flash chips, which have several smaller
2475c609719bSwdenk	   sectors at the start or the end. For instance, such a
2476c609719bSwdenk	   layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In
2477c609719bSwdenk	   such a case you would place the environment in one of the
2478c609719bSwdenk	   4 kB sectors - with U-Boot code before and after it. With
2479c609719bSwdenk	   "top boot sector" type flash chips, you would put the
2480c609719bSwdenk	   environment in one of the last sectors, leaving a gap
2481c609719bSwdenk	   between U-Boot and the environment.
2482c609719bSwdenk
24830e8d1586SJean-Christophe PLAGNIOL-VILLARD	- CONFIG_ENV_OFFSET:
2484c609719bSwdenk
2485c609719bSwdenk	   Offset of environment data (variable area) to the
2486c609719bSwdenk	   beginning of flash memory; for instance, with bottom boot
2487c609719bSwdenk	   type flash chips the second sector can be used: the offset
2488c609719bSwdenk	   for this sector is given here.
2489c609719bSwdenk
24906d0f6bcfSJean-Christophe PLAGNIOL-VILLARD	   CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE.
2491c609719bSwdenk
24920e8d1586SJean-Christophe PLAGNIOL-VILLARD	- CONFIG_ENV_ADDR:
2493c609719bSwdenk
2494c609719bSwdenk	   This is just another way to specify the start address of
2495c609719bSwdenk	   the flash sector containing the environment (instead of
24960e8d1586SJean-Christophe PLAGNIOL-VILLARD	   CONFIG_ENV_OFFSET).
2497c609719bSwdenk
24980e8d1586SJean-Christophe PLAGNIOL-VILLARD	- CONFIG_ENV_SECT_SIZE:
2499c609719bSwdenk
2500c609719bSwdenk	   Size of the sector containing the environment.
2501c609719bSwdenk
2502c609719bSwdenk
2503c609719bSwdenk	b) Sometimes flash chips have few, equal sized, BIG sectors.
2504c609719bSwdenk	   In such a case you don't want to spend a whole sector for
2505c609719bSwdenk	   the environment.
2506c609719bSwdenk
25070e8d1586SJean-Christophe PLAGNIOL-VILLARD	- CONFIG_ENV_SIZE:
2508c609719bSwdenk
25095a1aceb0SJean-Christophe PLAGNIOL-VILLARD	   If you use this in combination with CONFIG_ENV_IS_IN_FLASH
25100e8d1586SJean-Christophe PLAGNIOL-VILLARD	   and CONFIG_ENV_SECT_SIZE, you can specify to use only a part
2511c609719bSwdenk	   of this flash sector for the environment. This saves
2512c609719bSwdenk	   memory for the RAM copy of the environment.
2513c609719bSwdenk
2514c609719bSwdenk	   It may also save flash memory if you decide to use this
2515c609719bSwdenk	   when your environment is "embedded" within U-Boot code,
2516c609719bSwdenk	   since then the remainder of the flash sector could be used
2517c609719bSwdenk	   for U-Boot code. It should be pointed out that this is
2518c609719bSwdenk	   STRONGLY DISCOURAGED from a robustness point of view:
2519c609719bSwdenk	   updating the environment in flash makes it always
2520c609719bSwdenk	   necessary to erase the WHOLE sector. If something goes
2521c609719bSwdenk	   wrong before the contents has been restored from a copy in
2522c609719bSwdenk	   RAM, your target system will be dead.
2523c609719bSwdenk
25240e8d1586SJean-Christophe PLAGNIOL-VILLARD	- CONFIG_ENV_ADDR_REDUND
25250e8d1586SJean-Christophe PLAGNIOL-VILLARD	  CONFIG_ENV_SIZE_REDUND
2526c609719bSwdenk
2527c609719bSwdenk	   These settings describe a second storage area used to hold
252811ccc33fSMarcel Ziswiler	   a redundant copy of the environment data, so that there is
25293e38691eSwdenk	   a valid backup copy in case there is a power failure during
2530c609719bSwdenk	   a "saveenv" operation.
2531c609719bSwdenk
2532c609719bSwdenkBE CAREFUL! Any changes to the flash layout, and some changes to the
2533c609719bSwdenksource code will make it necessary to adapt <board>/u-boot.lds*
2534c609719bSwdenkaccordingly!
2535c609719bSwdenk
2536c609719bSwdenk
25379314cee6SJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_NVRAM:
2538c609719bSwdenk
2539c609719bSwdenk	Define this if you have some non-volatile memory device
2540c609719bSwdenk	(NVRAM, battery buffered SRAM) which you want to use for the
2541c609719bSwdenk	environment.
2542c609719bSwdenk
25430e8d1586SJean-Christophe PLAGNIOL-VILLARD	- CONFIG_ENV_ADDR:
25440e8d1586SJean-Christophe PLAGNIOL-VILLARD	- CONFIG_ENV_SIZE:
2545c609719bSwdenk
254611ccc33fSMarcel Ziswiler	  These two #defines are used to determine the memory area you
2547c609719bSwdenk	  want to use for environment. It is assumed that this memory
2548c609719bSwdenk	  can just be read and written to, without any special
2549c609719bSwdenk	  provision.
2550c609719bSwdenk
2551c609719bSwdenkBE CAREFUL! The first access to the environment happens quite early
2552c609719bSwdenkin U-Boot initalization (when we try to get the setting of for the
255311ccc33fSMarcel Ziswilerconsole baudrate). You *MUST* have mapped your NVRAM area then, or
2554c609719bSwdenkU-Boot will hang.
2555c609719bSwdenk
2556c609719bSwdenkPlease note that even with NVRAM we still use a copy of the
2557c609719bSwdenkenvironment in RAM: we could work on NVRAM directly, but we want to
2558c609719bSwdenkkeep settings there always unmodified except somebody uses "saveenv"
2559c609719bSwdenkto save the current settings.
2560c609719bSwdenk
2561c609719bSwdenk
2562bb1f8b4fSJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_EEPROM:
2563c609719bSwdenk
2564c609719bSwdenk	Use this if you have an EEPROM or similar serial access
2565c609719bSwdenk	device and a driver for it.
2566c609719bSwdenk
25670e8d1586SJean-Christophe PLAGNIOL-VILLARD	- CONFIG_ENV_OFFSET:
25680e8d1586SJean-Christophe PLAGNIOL-VILLARD	- CONFIG_ENV_SIZE:
2569c609719bSwdenk
2570c609719bSwdenk	  These two #defines specify the offset and size of the
2571c609719bSwdenk	  environment area within the total memory of your EEPROM.
2572c609719bSwdenk
25736d0f6bcfSJean-Christophe PLAGNIOL-VILLARD	- CONFIG_SYS_I2C_EEPROM_ADDR:
2574c609719bSwdenk	  If defined, specified the chip address of the EEPROM device.
2575c609719bSwdenk	  The default address is zero.
2576c609719bSwdenk
25776d0f6bcfSJean-Christophe PLAGNIOL-VILLARD	- CONFIG_SYS_EEPROM_PAGE_WRITE_BITS:
2578c609719bSwdenk	  If defined, the number of bits used to address bytes in a
2579c609719bSwdenk	  single page in the EEPROM device.  A 64 byte page, for example
2580c609719bSwdenk	  would require six bits.
2581c609719bSwdenk
25826d0f6bcfSJean-Christophe PLAGNIOL-VILLARD	- CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS:
2583c609719bSwdenk	  If defined, the number of milliseconds to delay between
2584c609719bSwdenk	  page writes.	The default is zero milliseconds.
2585c609719bSwdenk
25866d0f6bcfSJean-Christophe PLAGNIOL-VILLARD	- CONFIG_SYS_I2C_EEPROM_ADDR_LEN:
2587c609719bSwdenk	  The length in bytes of the EEPROM memory array address.  Note
2588c609719bSwdenk	  that this is NOT the chip address length!
2589c609719bSwdenk
25906d0f6bcfSJean-Christophe PLAGNIOL-VILLARD	- CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW:
25915cf91d6bSwdenk	  EEPROM chips that implement "address overflow" are ones
25925cf91d6bSwdenk	  like Catalyst 24WC04/08/16 which has 9/10/11 bits of
25935cf91d6bSwdenk	  address and the extra bits end up in the "chip address" bit
25945cf91d6bSwdenk	  slots. This makes a 24WC08 (1Kbyte) chip look like four 256
25955cf91d6bSwdenk	  byte chips.
25965cf91d6bSwdenk
25975cf91d6bSwdenk	  Note that we consider the length of the address field to
25985cf91d6bSwdenk	  still be one byte because the extra address bits are hidden
25995cf91d6bSwdenk	  in the chip address.
26005cf91d6bSwdenk
26016d0f6bcfSJean-Christophe PLAGNIOL-VILLARD	- CONFIG_SYS_EEPROM_SIZE:
2602c609719bSwdenk	  The size in bytes of the EEPROM device.
2603c609719bSwdenk
2604548738b4SHeiko Schocher	- CONFIG_ENV_EEPROM_IS_ON_I2C
2605548738b4SHeiko Schocher	  define this, if you have I2C and SPI activated, and your
2606548738b4SHeiko Schocher	  EEPROM, which holds the environment, is on the I2C bus.
2607548738b4SHeiko Schocher
2608548738b4SHeiko Schocher	- CONFIG_I2C_ENV_EEPROM_BUS
2609548738b4SHeiko Schocher	  if you have an Environment on an EEPROM reached over
2610548738b4SHeiko Schocher	  I2C muxes, you can define here, how to reach this
2611548738b4SHeiko Schocher	  EEPROM. For example:
2612548738b4SHeiko Schocher
2613548738b4SHeiko Schocher	  #define CONFIG_I2C_ENV_EEPROM_BUS	  "pca9547:70:d\0"
2614548738b4SHeiko Schocher
2615548738b4SHeiko Schocher	  EEPROM which holds the environment, is reached over
2616548738b4SHeiko Schocher	  a pca9547 i2c mux with address 0x70, channel 3.
2617c609719bSwdenk
2618057c849cSJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_DATAFLASH:
26195779d8d9Swdenk
26205779d8d9Swdenk	Define this if you have a DataFlash memory device which you
26215779d8d9Swdenk	want to use for the environment.
26225779d8d9Swdenk
26230e8d1586SJean-Christophe PLAGNIOL-VILLARD	- CONFIG_ENV_OFFSET:
26240e8d1586SJean-Christophe PLAGNIOL-VILLARD	- CONFIG_ENV_ADDR:
26250e8d1586SJean-Christophe PLAGNIOL-VILLARD	- CONFIG_ENV_SIZE:
26265779d8d9Swdenk
26275779d8d9Swdenk	  These three #defines specify the offset and size of the
26285779d8d9Swdenk	  environment area within the total memory of your DataFlash placed
26295779d8d9Swdenk	  at the specified address.
26305779d8d9Swdenk
263151bfee19SJean-Christophe PLAGNIOL-VILLARD- CONFIG_ENV_IS_IN_NAND:
263213a5695bSwdenk
263313a5695bSwdenk	Define this if you have a NAND device which you want to use
263413a5695bSwdenk	for the environment.
263513a5695bSwdenk
26360e8d1586SJean-Christophe PLAGNIOL-VILLARD	- CONFIG_ENV_OFFSET:
26370e8d1586SJean-Christophe PLAGNIOL-VILLARD	- CONFIG_ENV_SIZE:
263813a5695bSwdenk
263913a5695bSwdenk	  These two #defines specify the offset and size of the environment
2640fdd813deSScott Wood	  area within the first NAND device.  CONFIG_ENV_OFFSET must be
2641fdd813deSScott Wood	  aligned to an erase block boundary.
26425779d8d9Swdenk
2643fdd813deSScott Wood	- CONFIG_ENV_OFFSET_REDUND (optional):
2644e443c944SMarkus Klotzbuecher
26450e8d1586SJean-Christophe PLAGNIOL-VILLARD	  This setting describes a second storage area of CONFIG_ENV_SIZE
2646fdd813deSScott Wood	  size used to hold a redundant copy of the environment data, so
2647fdd813deSScott Wood	  that there is a valid backup copy in case there is a power failure
2648fdd813deSScott Wood	  during a "saveenv" operation.  CONFIG_ENV_OFFSET_RENDUND must be
2649fdd813deSScott Wood	  aligned to an erase block boundary.
2650e443c944SMarkus Klotzbuecher
2651fdd813deSScott Wood	- CONFIG_ENV_RANGE (optional):
2652fdd813deSScott Wood
2653fdd813deSScott Wood	  Specifies the length of the region in which the environment
2654fdd813deSScott Wood	  can be written.  This should be a multiple of the NAND device's
2655fdd813deSScott Wood	  block size.  Specifying a range with more erase blocks than
2656fdd813deSScott Wood	  are needed to hold CONFIG_ENV_SIZE allows bad blocks within
2657fdd813deSScott Wood	  the range to be avoided.
2658fdd813deSScott Wood
2659fdd813deSScott Wood	- CONFIG_ENV_OFFSET_OOB (optional):
2660fdd813deSScott Wood
2661fdd813deSScott Wood	  Enables support for dynamically retrieving the offset of the
2662fdd813deSScott Wood	  environment from block zero's out-of-band data.  The
2663fdd813deSScott Wood	  "nand env.oob" command can be used to record this offset.
2664fdd813deSScott Wood	  Currently, CONFIG_ENV_OFFSET_REDUND is not supported when
2665fdd813deSScott Wood	  using CONFIG_ENV_OFFSET_OOB.
2666e443c944SMarkus Klotzbuecher
2667b74ab737SGuennadi Liakhovetski- CONFIG_NAND_ENV_DST
2668b74ab737SGuennadi Liakhovetski
2669b74ab737SGuennadi Liakhovetski	Defines address in RAM to which the nand_spl code should copy the
2670b74ab737SGuennadi Liakhovetski	environment. If redundant environment is used, it will be copied to
2671b74ab737SGuennadi Liakhovetski	CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE.
2672b74ab737SGuennadi Liakhovetski
26736d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SPI_INIT_OFFSET
2674c609719bSwdenk
2675c609719bSwdenk	Defines offset to the initial SPI buffer area in DPRAM. The
2676c609719bSwdenk	area is used at an early stage (ROM part) if the environment
2677c609719bSwdenk	is configured to reside in the SPI EEPROM: We need a 520 byte
2678c609719bSwdenk	scratch DPRAM area. It is used between the two initialization
2679c609719bSwdenk	calls (spi_init_f() and spi_init_r()). A value of 0xB00 seems
2680c609719bSwdenk	to be a good choice since it makes it far enough from the
2681c609719bSwdenk	start of the data area as well as from the stack pointer.
2682c609719bSwdenk
2683e881cb56SBruce AdlerPlease note that the environment is read-only until the monitor
2684c609719bSwdenkhas been relocated to RAM and a RAM copy of the environment has been
2685cdb74977SWolfgang Denkcreated; also, when using EEPROM you will have to use getenv_f()
2686c609719bSwdenkuntil then to read environment variables.
2687c609719bSwdenk
268885ec0bccSwdenkThe environment is protected by a CRC32 checksum. Before the monitor
268985ec0bccSwdenkis relocated into RAM, as a result of a bad CRC you will be working
269085ec0bccSwdenkwith the compiled-in default environment - *silently*!!! [This is
269185ec0bccSwdenknecessary, because the first environment variable we need is the
269285ec0bccSwdenk"baudrate" setting for the console - if we have a bad CRC, we don't
269385ec0bccSwdenkhave any device yet where we could complain.]
2694c609719bSwdenk
2695c609719bSwdenkNote: once the monitor has been relocated, then it will complain if
2696c609719bSwdenkthe default environment is used; a new CRC is computed as soon as you
269785ec0bccSwdenkuse the "saveenv" command to store a valid environment.
2698c609719bSwdenk
26996d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FAULT_ECHO_LINK_DOWN:
2700fc3e2165Swdenk		Echo the inverted Ethernet link state to the fault LED.
2701fc3e2165Swdenk
27026d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		Note: If this option is active, then CONFIG_SYS_FAULT_MII_ADDR
2703fc3e2165Swdenk		      also needs to be defined.
2704fc3e2165Swdenk
27056d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_FAULT_MII_ADDR:
2706fc3e2165Swdenk		MII address of the PHY to check for the Ethernet link state.
2707c609719bSwdenk
2708f5675aa5SRon Madrid- CONFIG_NS16550_MIN_FUNCTIONS:
2709f5675aa5SRon Madrid		Define this if you desire to only have use of the NS16550_init
2710f5675aa5SRon Madrid		and NS16550_putc functions for the serial driver located at
2711f5675aa5SRon Madrid		drivers/serial/ns16550.c.  This option is useful for saving
2712f5675aa5SRon Madrid		space for already greatly restricted images, including but not
2713f5675aa5SRon Madrid		limited to NAND_SPL configurations.
2714f5675aa5SRon Madrid
2715c609719bSwdenkLow Level (hardware related) configuration options:
2716dc7c9a1aSwdenk---------------------------------------------------
2717c609719bSwdenk
27186d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CACHELINE_SIZE:
2719c609719bSwdenk		Cache Line Size of the CPU.
2720c609719bSwdenk
27216d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_DEFAULT_IMMR:
2722c609719bSwdenk		Default address of the IMMR after system reset.
27232535d602Swdenk
27242535d602Swdenk		Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU,
27252535d602Swdenk		and RPXsuper) to be able to adjust the position of
27262535d602Swdenk		the IMMR register after a reset.
2727c609719bSwdenk
27287f6c2cbcSwdenk- Floppy Disk Support:
27296d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_FDC_DRIVE_NUMBER
27307f6c2cbcSwdenk
27317f6c2cbcSwdenk		the default drive number (default value 0)
27327f6c2cbcSwdenk
27336d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_ISA_IO_STRIDE
27347f6c2cbcSwdenk
273511ccc33fSMarcel Ziswiler		defines the spacing between FDC chipset registers
27367f6c2cbcSwdenk		(default value 1)
27377f6c2cbcSwdenk
27386d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_ISA_IO_OFFSET
27397f6c2cbcSwdenk
27407f6c2cbcSwdenk		defines the offset of register from address. It
27417f6c2cbcSwdenk		depends on which part of the data bus is connected to
274211ccc33fSMarcel Ziswiler		the FDC chipset. (default value 0)
27437f6c2cbcSwdenk
27446d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		If CONFIG_SYS_ISA_IO_STRIDE CONFIG_SYS_ISA_IO_OFFSET and
27456d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_FDC_DRIVE_NUMBER are undefined, they take their
27467f6c2cbcSwdenk		default value.
27477f6c2cbcSwdenk
27486d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		if CONFIG_SYS_FDC_HW_INIT is defined, then the function
27497f6c2cbcSwdenk		fdc_hw_init() is called at the beginning of the FDC
27507f6c2cbcSwdenk		setup. fdc_hw_init() must be provided by the board
27517f6c2cbcSwdenk		source code. It is used to make hardware dependant
27527f6c2cbcSwdenk		initializations.
27537f6c2cbcSwdenk
2754*0abddf82SMacpaul Lin- CONFIG_IDE_AHB:
2755*0abddf82SMacpaul Lin		Most IDE controllers were designed to be connected with PCI
2756*0abddf82SMacpaul Lin		interface. Only few of them were designed for AHB interface.
2757*0abddf82SMacpaul Lin		When software is doing ATA command and data transfer to
2758*0abddf82SMacpaul Lin		IDE devices through IDE-AHB controller, some additional
2759*0abddf82SMacpaul Lin		registers accessing to these kind of IDE-AHB controller
2760*0abddf82SMacpaul Lin		is requierd.
2761*0abddf82SMacpaul Lin
27626d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_IMMR:	Physical address of the Internal Memory.
276325d6712aSwdenk		DO NOT CHANGE unless you know exactly what you're
276425d6712aSwdenk		doing! (11-4) [MPC8xx/82xx systems only]
2765c609719bSwdenk
27666d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_INIT_RAM_ADDR:
2767c609719bSwdenk
27687152b1d0Swdenk		Start address of memory area that can be used for
2769c609719bSwdenk		initial data and stack; please note that this must be
2770c609719bSwdenk		writable memory that is working WITHOUT special
2771c609719bSwdenk		initialization, i. e. you CANNOT use normal RAM which
2772c609719bSwdenk		will become available only after programming the
2773c609719bSwdenk		memory controller and running certain initialization
2774c609719bSwdenk		sequences.
2775c609719bSwdenk
2776c609719bSwdenk		U-Boot uses the following memory types:
2777c609719bSwdenk		- MPC8xx and MPC8260: IMMR (internal memory of the CPU)
2778c609719bSwdenk		- MPC824X: data cache
2779c609719bSwdenk		- PPC4xx:  data cache
2780c609719bSwdenk
27816d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_GBL_DATA_OFFSET:
2782c609719bSwdenk
2783c609719bSwdenk		Offset of the initial data structure in the memory
27846d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		area defined by CONFIG_SYS_INIT_RAM_ADDR. Usually
27856d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_GBL_DATA_OFFSET is chosen such that the initial
2786c609719bSwdenk		data is located at the end of the available space
2787553f0982SWolfgang Denk		(sometimes written as (CONFIG_SYS_INIT_RAM_SIZE -
27886d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_INIT_DATA_SIZE), and the initial stack is just
27896d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		below that area (growing from (CONFIG_SYS_INIT_RAM_ADDR +
27906d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_GBL_DATA_OFFSET) downward.
2791c609719bSwdenk
2792c609719bSwdenk	Note:
2793c609719bSwdenk		On the MPC824X (or other systems that use the data
2794c609719bSwdenk		cache for initial memory) the address chosen for
27956d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		CONFIG_SYS_INIT_RAM_ADDR is basically arbitrary - it must
2796c609719bSwdenk		point to an otherwise UNUSED address space between
2797c609719bSwdenk		the top of RAM and the start of the PCI space.
2798c609719bSwdenk
27996d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SIUMCR:	SIU Module Configuration (11-6)
2800c609719bSwdenk
28016d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SYPCR:	System Protection Control (11-9)
2802c609719bSwdenk
28036d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_TBSCR:	Time Base Status and Control (11-26)
2804c609719bSwdenk
28056d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PISCR:	Periodic Interrupt Status and Control (11-31)
2806c609719bSwdenk
28076d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PLPRCR:	PLL, Low-Power, and Reset Control Register (15-30)
2808c609719bSwdenk
28096d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SCCR:	System Clock and reset Control Register (15-27)
2810c609719bSwdenk
28116d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_OR_TIMING_SDRAM:
2812c609719bSwdenk		SDRAM timing
2813c609719bSwdenk
28146d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAMR_PTA:
2815c609719bSwdenk		periodic timer for refresh
2816c609719bSwdenk
28176d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_DER:	Debug Event Register (37-47)
2818c609719bSwdenk
28196d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- FLASH_BASE0_PRELIM, FLASH_BASE1_PRELIM, CONFIG_SYS_REMAP_OR_AM,
28206d0f6bcfSJean-Christophe PLAGNIOL-VILLARD  CONFIG_SYS_PRELIM_OR_AM, CONFIG_SYS_OR_TIMING_FLASH, CONFIG_SYS_OR0_REMAP,
28216d0f6bcfSJean-Christophe PLAGNIOL-VILLARD  CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR1_REMAP, CONFIG_SYS_OR1_PRELIM,
28226d0f6bcfSJean-Christophe PLAGNIOL-VILLARD  CONFIG_SYS_BR1_PRELIM:
2823c609719bSwdenk		Memory Controller Definitions: BR0/1 and OR0/1 (FLASH)
2824c609719bSwdenk
2825c609719bSwdenk- SDRAM_BASE2_PRELIM, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE,
28266d0f6bcfSJean-Christophe PLAGNIOL-VILLARD  CONFIG_SYS_OR_TIMING_SDRAM, CONFIG_SYS_OR2_PRELIM, CONFIG_SYS_BR2_PRELIM,
28276d0f6bcfSJean-Christophe PLAGNIOL-VILLARD  CONFIG_SYS_OR3_PRELIM, CONFIG_SYS_BR3_PRELIM:
2828c609719bSwdenk		Memory Controller Definitions: BR2/3 and OR2/3 (SDRAM)
2829c609719bSwdenk
28306d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_MAMR_PTA, CONFIG_SYS_MPTPR_2BK_4K, CONFIG_SYS_MPTPR_1BK_4K, CONFIG_SYS_MPTPR_2BK_8K,
28316d0f6bcfSJean-Christophe PLAGNIOL-VILLARD  CONFIG_SYS_MPTPR_1BK_8K, CONFIG_SYS_MAMR_8COL, CONFIG_SYS_MAMR_9COL:
2832c609719bSwdenk		Machine Mode Register and Memory Periodic Timer
2833c609719bSwdenk		Prescaler definitions (SDRAM timing)
2834c609719bSwdenk
28356d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_I2C_UCODE_PATCH, CONFIG_SYS_I2C_DPMEM_OFFSET [0x1FC0]:
2836c609719bSwdenk		enable I2C microcode relocation patch (MPC8xx);
2837c609719bSwdenk		define relocation offset in DPRAM [DSP2]
2838c609719bSwdenk
28396d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SMC_UCODE_PATCH, CONFIG_SYS_SMC_DPMEM_OFFSET [0x1FC0]:
2840b423d055SHeiko Schocher		enable SMC microcode relocation patch (MPC8xx);
2841b423d055SHeiko Schocher		define relocation offset in DPRAM [SMC1]
2842b423d055SHeiko Schocher
28436d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SPI_UCODE_PATCH, CONFIG_SYS_SPI_DPMEM_OFFSET [0x1FC0]:
2844c609719bSwdenk		enable SPI microcode relocation patch (MPC8xx);
2845c609719bSwdenk		define relocation offset in DPRAM [SCC4]
2846c609719bSwdenk
28476d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_USE_OSCCLK:
2848c609719bSwdenk		Use OSCM clock mode on MBX8xx board. Be careful,
2849c609719bSwdenk		wrong setting might damage your board. Read
2850c609719bSwdenk		doc/README.MBX before setting this variable!
2851c609719bSwdenk
28526d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_CPM_POST_WORD_ADDR: (MPC8xx, MPC8260 only)
2853ea909b76Swdenk		Offset of the bootmode word in DPRAM used by post
2854ea909b76Swdenk		(Power On Self Tests). This definition overrides
2855ea909b76Swdenk		#define'd default value in commproc.h resp.
2856ea909b76Swdenk		cpm_8260.h.
2857ea909b76Swdenk
28586d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_PCI_SLV_MEM_LOCAL, CONFIG_SYS_PCI_SLV_MEM_BUS, CONFIG_SYS_PICMR0_MASK_ATTRIB,
28596d0f6bcfSJean-Christophe PLAGNIOL-VILLARD  CONFIG_SYS_PCI_MSTR0_LOCAL, CONFIG_SYS_PCIMSK0_MASK, CONFIG_SYS_PCI_MSTR1_LOCAL,
28606d0f6bcfSJean-Christophe PLAGNIOL-VILLARD  CONFIG_SYS_PCIMSK1_MASK, CONFIG_SYS_PCI_MSTR_MEM_LOCAL, CONFIG_SYS_PCI_MSTR_MEM_BUS,
28616d0f6bcfSJean-Christophe PLAGNIOL-VILLARD  CONFIG_SYS_CPU_PCI_MEM_START, CONFIG_SYS_PCI_MSTR_MEM_SIZE, CONFIG_SYS_POCMR0_MASK_ATTRIB,
28626d0f6bcfSJean-Christophe PLAGNIOL-VILLARD  CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL, CONFIG_SYS_PCI_MSTR_MEMIO_BUS, CPU_PCI_MEMIO_START,
28636d0f6bcfSJean-Christophe PLAGNIOL-VILLARD  CONFIG_SYS_PCI_MSTR_MEMIO_SIZE, CONFIG_SYS_POCMR1_MASK_ATTRIB, CONFIG_SYS_PCI_MSTR_IO_LOCAL,
28646d0f6bcfSJean-Christophe PLAGNIOL-VILLARD  CONFIG_SYS_PCI_MSTR_IO_BUS, CONFIG_SYS_CPU_PCI_IO_START, CONFIG_SYS_PCI_MSTR_IO_SIZE,
28656d0f6bcfSJean-Christophe PLAGNIOL-VILLARD  CONFIG_SYS_POCMR2_MASK_ATTRIB: (MPC826x only)
2866a47a12beSStefan Roese		Overrides the default PCI memory map in arch/powerpc/cpu/mpc8260/pci.c if set.
28675d232d0eSwdenk
28689cacf4fcSDirk Eibach- CONFIG_PCI_DISABLE_PCIE:
28699cacf4fcSDirk Eibach		Disable PCI-Express on systems where it is supported but not
28709cacf4fcSDirk Eibach		required.
28719cacf4fcSDirk Eibach
2872a09b9b68SKumar Gala- CONFIG_SYS_SRIO:
2873a09b9b68SKumar Gala		Chip has SRIO or not
2874a09b9b68SKumar Gala
2875a09b9b68SKumar Gala- CONFIG_SRIO1:
2876a09b9b68SKumar Gala		Board has SRIO 1 port available
2877a09b9b68SKumar Gala
2878a09b9b68SKumar Gala- CONFIG_SRIO2:
2879a09b9b68SKumar Gala		Board has SRIO 2 port available
2880a09b9b68SKumar Gala
2881a09b9b68SKumar Gala- CONFIG_SYS_SRIOn_MEM_VIRT:
2882a09b9b68SKumar Gala		Virtual Address of SRIO port 'n' memory region
2883a09b9b68SKumar Gala
2884a09b9b68SKumar Gala- CONFIG_SYS_SRIOn_MEM_PHYS:
2885a09b9b68SKumar Gala		Physical Address of SRIO port 'n' memory region
2886a09b9b68SKumar Gala
2887a09b9b68SKumar Gala- CONFIG_SYS_SRIOn_MEM_SIZE:
2888a09b9b68SKumar Gala		Size of SRIO port 'n' memory region
2889a09b9b68SKumar Gala
2890bb99ad6dSBen Warren- CONFIG_SPD_EEPROM
2891218ca724SWolfgang Denk		Get DDR timing information from an I2C EEPROM. Common
2892218ca724SWolfgang Denk		with pluggable memory modules such as SODIMMs
2893218ca724SWolfgang Denk
2894bb99ad6dSBen Warren  SPD_EEPROM_ADDRESS
2895bb99ad6dSBen Warren		I2C address of the SPD EEPROM
2896bb99ad6dSBen Warren
28976d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_SPD_BUS_NUM
2898218ca724SWolfgang Denk		If SPD EEPROM is on an I2C bus other than the first
2899218ca724SWolfgang Denk		one, specify here. Note that the value must resolve
2900218ca724SWolfgang Denk		to something your driver can deal with.
2901bb99ad6dSBen Warren
29026d0f6bcfSJean-Christophe PLAGNIOL-VILLARD- CONFIG_SYS_83XX_DDR_USES_CS0
2903218ca724SWolfgang Denk		Only for 83xx systems. If specified, then DDR should
2904218ca724SWolfgang Denk		be configured using CS0 and CS1 instead of CS2 and CS3.
29052ad6b513STimur Tabi
2906c26e454dSwdenk- CONFIG_ETHER_ON_FEC[12]
2907c26e454dSwdenk		Define to enable FEC[12] on a 8xx series processor.
2908c26e454dSwdenk
2909c26e454dSwdenk- CONFIG_FEC[12]_PHY
2910c26e454dSwdenk		Define to the hardcoded PHY address which corresponds
29116e592385Swdenk		to the given FEC; i. e.
2912c26e454dSwdenk			#define CONFIG_FEC1_PHY 4
2913c26e454dSwdenk		means that the PHY with address 4 is connected to FEC1
2914c26e454dSwdenk
2915c26e454dSwdenk		When set to -1, means to probe for first available.
2916c26e454dSwdenk
2917c26e454dSwdenk- CONFIG_FEC[12]_PHY_NORXERR
2918c26e454dSwdenk		The PHY does not have a RXERR line (RMII only).
2919c26e454dSwdenk		(so program the FEC to ignore it).
2920c26e454dSwdenk
2921c26e454dSwdenk- CONFIG_RMII
2922c26e454dSwdenk		Enable RMII mode for all FECs.
2923c26e454dSwdenk		Note that this is a global option, we can't
2924c26e454dSwdenk		have one FEC in standard MII mode and another in RMII mode.
2925c26e454dSwdenk
29265cf91d6bSwdenk- CONFIG_CRC32_VERIFY
29275cf91d6bSwdenk		Add a verify option to the crc32 command.
29285cf91d6bSwdenk		The syntax is:
29295cf91d6bSwdenk
29305cf91d6bSwdenk		=> crc32 -v <address> <count> <crc32>
29315cf91d6bSwdenk
29325cf91d6bSwdenk		Where address/count indicate a memory area
29335cf91d6bSwdenk		and crc32 is the correct crc32 which the
29345cf91d6bSwdenk		area should have.
29355cf91d6bSwdenk
293656523f12Swdenk- CONFIG_LOOPW
293756523f12Swdenk		Add the "loopw" memory command. This only takes effect if
2938602ad3b3SJon Loeliger		the memory commands are activated globally (CONFIG_CMD_MEM).
293956523f12Swdenk
29407b466641Sstroese- CONFIG_MX_CYCLIC
29417b466641Sstroese		Add the "mdc" and "mwc" memory commands. These are cyclic
29427b466641Sstroese		"md/mw" commands.
29437b466641Sstroese		Examples:
29447b466641Sstroese
29457b466641Sstroese		=> mdc.b 10 4 500
29467b466641Sstroese		This command will print 4 bytes (10,11,12,13) each 500 ms.
29477b466641Sstroese
29487b466641Sstroese		=> mwc.l 100 12345678 10
29497b466641Sstroese		This command will write 12345678 to address 100 all 10 ms.
29507b466641Sstroese
29517b466641Sstroese		This only takes effect if the memory commands are activated
2952602ad3b3SJon Loeliger		globally (CONFIG_CMD_MEM).
29537b466641Sstroese
29548aa1a2d1Swdenk- CONFIG_SKIP_LOWLEVEL_INIT
2955e03f3169SWolfgang Denk		[ARM only] If this variable is defined, then certain
2956e03f3169SWolfgang Denk		low level initializations (like setting up the memory
2957e03f3169SWolfgang Denk		controller) are omitted and/or U-Boot does not
2958e03f3169SWolfgang Denk		relocate itself into RAM.
29598aa1a2d1Swdenk
2960e03f3169SWolfgang Denk		Normally this variable MUST NOT be defined. The only
2961e03f3169SWolfgang Denk		exception is when U-Boot is loaded (to RAM) by some
2962e03f3169SWolfgang Denk		other boot loader or by a debugger which performs
2963e03f3169SWolfgang Denk		these initializations itself.
29648aa1a2d1Swdenk
2965df81238bSMagnus Lilja- CONFIG_PRELOADER
2966df81238bSMagnus Lilja		Modifies the behaviour of start.S when compiling a loader
2967df81238bSMagnus Lilja		that is executed before the actual U-Boot. E.g. when
2968df81238bSMagnus Lilja		compiling a NAND SPL.
2969400558b5Swdenk
2970d8834a13SMatthias Weisser- CONFIG_USE_ARCH_MEMCPY
2971d8834a13SMatthias Weisser  CONFIG_USE_ARCH_MEMSET
2972d8834a13SMatthias Weisser		If these options are used a optimized version of memcpy/memset will
2973d8834a13SMatthias Weisser		be used if available. These functions may be faster under some
2974d8834a13SMatthias Weisser		conditions but may increase the binary size.
2975d8834a13SMatthias Weisser
2976c609719bSwdenkBuilding the Software:
2977c609719bSwdenk======================
2978c609719bSwdenk
2979218ca724SWolfgang DenkBuilding U-Boot has been tested in several native build environments
2980218ca724SWolfgang Denkand in many different cross environments. Of course we cannot support
2981218ca724SWolfgang Denkall possibly existing versions of cross development tools in all
2982218ca724SWolfgang Denk(potentially obsolete) versions. In case of tool chain problems we
2983218ca724SWolfgang Denkrecommend to use the ELDK (see http://www.denx.de/wiki/DULG/ELDK)
2984218ca724SWolfgang Denkwhich is extensively used to build and test U-Boot.
2985c609719bSwdenk
2986218ca724SWolfgang DenkIf you are not using a native environment, it is assumed that you
2987218ca724SWolfgang Denkhave GNU cross compiling tools available in your path. In this case,
2988218ca724SWolfgang Denkyou must set the environment variable CROSS_COMPILE in your shell.
2989218ca724SWolfgang DenkNote that no changes to the Makefile or any other source files are
2990218ca724SWolfgang Denknecessary. For example using the ELDK on a 4xx CPU, please enter:
2991c609719bSwdenk
2992218ca724SWolfgang Denk	$ CROSS_COMPILE=ppc_4xx-
2993218ca724SWolfgang Denk	$ export CROSS_COMPILE
2994c609719bSwdenk
29952f8d396bSPeter TyserNote: If you wish to generate Windows versions of the utilities in
29962f8d396bSPeter Tyser      the tools directory you can use the MinGW toolchain
29972f8d396bSPeter Tyser      (http://www.mingw.org).  Set your HOST tools to the MinGW
29982f8d396bSPeter Tyser      toolchain and execute 'make tools'.  For example:
29992f8d396bSPeter Tyser
30002f8d396bSPeter Tyser       $ make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools
30012f8d396bSPeter Tyser
30022f8d396bSPeter Tyser      Binaries such as tools/mkimage.exe will be created which can
30032f8d396bSPeter Tyser      be executed on computers running Windows.
30042f8d396bSPeter Tyser
3005c609719bSwdenkU-Boot is intended to be simple to build. After installing the
3006c609719bSwdenksources you must configure U-Boot for one specific board type. This
3007c609719bSwdenkis done by typing:
3008c609719bSwdenk
3009c609719bSwdenk	make NAME_config
3010c609719bSwdenk
3011218ca724SWolfgang Denkwhere "NAME_config" is the name of one of the existing configu-
3012218ca724SWolfgang Denkrations; see the main Makefile for supported names.
301354387ac9Swdenk
3014c609719bSwdenkNote: for some board special configuration names may exist; check if
3015c609719bSwdenk      additional information is available from the board vendor; for
30162729af9dSwdenk      instance, the TQM823L systems are available without (standard)
30172729af9dSwdenk      or with LCD support. You can select such additional "features"
301811ccc33fSMarcel Ziswiler      when choosing the configuration, i. e.
3019c609719bSwdenk
30202729af9dSwdenk      make TQM823L_config
30212729af9dSwdenk	- will configure for a plain TQM823L, i. e. no LCD support
3022c609719bSwdenk
3023c609719bSwdenk      make TQM823L_LCD_config
3024c609719bSwdenk	- will configure for a TQM823L with U-Boot console on LCD
3025c609719bSwdenk
3026c609719bSwdenk      etc.
3027c609719bSwdenk
3028c609719bSwdenk
3029c609719bSwdenkFinally, type "make all", and you should get some working U-Boot
30307152b1d0Swdenkimages ready for download to / installation on your system:
3031c609719bSwdenk
3032c609719bSwdenk- "u-boot.bin" is a raw binary image
3033c609719bSwdenk- "u-boot" is an image in ELF binary format
3034c609719bSwdenk- "u-boot.srec" is in Motorola S-Record format
3035c609719bSwdenk
3036baf31249SMarian BalakowiczBy default the build is performed locally and the objects are saved
3037baf31249SMarian Balakowiczin the source directory. One of the two methods can be used to change
3038baf31249SMarian Balakowiczthis behavior and build U-Boot to some external directory:
3039baf31249SMarian Balakowicz
3040baf31249SMarian Balakowicz1. Add O= to the make command line invocations:
3041baf31249SMarian Balakowicz
3042baf31249SMarian Balakowicz	make O=/tmp/build distclean
3043baf31249SMarian Balakowicz	make O=/tmp/build NAME_config
3044baf31249SMarian Balakowicz	make O=/tmp/build all
3045baf31249SMarian Balakowicz
3046baf31249SMarian Balakowicz2. Set environment variable BUILD_DIR to point to the desired location:
3047baf31249SMarian Balakowicz
3048baf31249SMarian Balakowicz	export BUILD_DIR=/tmp/build
3049baf31249SMarian Balakowicz	make distclean
3050baf31249SMarian Balakowicz	make NAME_config
3051baf31249SMarian Balakowicz	make all
3052baf31249SMarian Balakowicz
3053baf31249SMarian BalakowiczNote that the command line "O=" setting overrides the BUILD_DIR environment
3054baf31249SMarian Balakowiczvariable.
3055baf31249SMarian Balakowicz
3056c609719bSwdenk
3057c609719bSwdenkPlease be aware that the Makefiles assume you are using GNU make, so
3058c609719bSwdenkfor instance on NetBSD you might need to use "gmake" instead of
3059c609719bSwdenknative "make".
3060c609719bSwdenk
3061c609719bSwdenk
3062c609719bSwdenkIf the system board that you have is not listed, then you will need
3063c609719bSwdenkto port U-Boot to your hardware platform. To do this, follow these
3064c609719bSwdenksteps:
3065c609719bSwdenk
3066c609719bSwdenk1.  Add a new configuration option for your board to the toplevel
306785ec0bccSwdenk    "Makefile" and to the "MAKEALL" script, using the existing
306885ec0bccSwdenk    entries as examples. Note that here and at many other places
30697152b1d0Swdenk    boards and other names are listed in alphabetical sort order. Please
307085ec0bccSwdenk    keep this order.
3071c609719bSwdenk2.  Create a new directory to hold your board specific code. Add any
307285ec0bccSwdenk    files you need. In your board directory, you will need at least
307385ec0bccSwdenk    the "Makefile", a "<board>.c", "flash.c" and "u-boot.lds".
307485ec0bccSwdenk3.  Create a new configuration file "include/configs/<board>.h" for
307585ec0bccSwdenk    your board
3076c609719bSwdenk3.  If you're porting U-Boot to a new CPU, then also create a new
3077c609719bSwdenk    directory to hold your CPU specific code. Add any files you need.
307885ec0bccSwdenk4.  Run "make <board>_config" with your new name.
3079c609719bSwdenk5.  Type "make", and you should get a working "u-boot.srec" file
3080c609719bSwdenk    to be installed on your target system.
308185ec0bccSwdenk6.  Debug and solve any problems that might arise.
3082c609719bSwdenk    [Of course, this last step is much harder than it sounds.]
3083c609719bSwdenk
3084c609719bSwdenk
3085c609719bSwdenkTesting of U-Boot Modifications, Ports to New Hardware, etc.:
3086c609719bSwdenk==============================================================
3087c609719bSwdenk
3088c609719bSwdenkIf you have modified U-Boot sources (for instance added a new board
3089c609719bSwdenkor support for new devices, a new CPU, etc.) you are expected to
3090c609719bSwdenkprovide feedback to the other developers. The feedback normally takes
3091c609719bSwdenkthe form of a "patch", i. e. a context diff against a certain (latest
3092218ca724SWolfgang Denkofficial or latest in the git repository) version of U-Boot sources.
3093c609719bSwdenk
3094c609719bSwdenkBut before you submit such a patch, please verify that your modifi-
3095c609719bSwdenkcation did not break existing code. At least make sure that *ALL* of
3096c609719bSwdenkthe supported boards compile WITHOUT ANY compiler warnings. To do so,
3097c609719bSwdenkjust run the "MAKEALL" script, which will configure and build U-Boot
3098c609719bSwdenkfor ALL supported system. Be warned, this will take a while. You can
30997152b1d0Swdenkselect which (cross) compiler to use by passing a `CROSS_COMPILE'
3100218ca724SWolfgang Denkenvironment variable to the script, i. e. to use the ELDK cross tools
3101218ca724SWolfgang Denkyou can type
3102c609719bSwdenk
3103c609719bSwdenk	CROSS_COMPILE=ppc_8xx- MAKEALL
3104c609719bSwdenk
3105c609719bSwdenkor to build on a native PowerPC system you can type
3106c609719bSwdenk
3107c609719bSwdenk	CROSS_COMPILE=' ' MAKEALL
3108c609719bSwdenk
3109218ca724SWolfgang DenkWhen using the MAKEALL script, the default behaviour is to build
3110218ca724SWolfgang DenkU-Boot in the source directory. This location can be changed by
3111218ca724SWolfgang Denksetting the BUILD_DIR environment variable. Also, for each target
3112218ca724SWolfgang Denkbuilt, the MAKEALL script saves two log files (<target>.ERR and
3113218ca724SWolfgang Denk<target>.MAKEALL) in the <source dir>/LOG directory. This default
3114218ca724SWolfgang Denklocation can be changed by setting the MAKEALL_LOGDIR environment
3115218ca724SWolfgang Denkvariable. For example:
3116baf31249SMarian Balakowicz
3117baf31249SMarian Balakowicz	export BUILD_DIR=/tmp/build
3118baf31249SMarian Balakowicz	export MAKEALL_LOGDIR=/tmp/log
3119baf31249SMarian Balakowicz	CROSS_COMPILE=ppc_8xx- MAKEALL
3120baf31249SMarian Balakowicz
3121218ca724SWolfgang DenkWith the above settings build objects are saved in the /tmp/build,
3122218ca724SWolfgang Denklog files are saved in the /tmp/log and the source tree remains clean
3123218ca724SWolfgang Denkduring the whole build process.
3124baf31249SMarian Balakowicz
3125baf31249SMarian Balakowicz
3126c609719bSwdenkSee also "U-Boot Porting Guide" below.
3127c609719bSwdenk
3128c609719bSwdenk
3129c609719bSwdenkMonitor Commands - Overview:
3130c609719bSwdenk============================
3131c609719bSwdenk
3132c609719bSwdenkgo	- start application at address 'addr'
3133c609719bSwdenkrun	- run commands in an environment variable
3134c609719bSwdenkbootm	- boot application image from memory
3135c609719bSwdenkbootp	- boot image via network using BootP/TFTP protocol
3136c609719bSwdenktftpboot- boot image via network using TFTP protocol
3137c609719bSwdenk	       and env variables "ipaddr" and "serverip"
3138c609719bSwdenk	       (and eventually "gatewayip")
3139c609719bSwdenkrarpboot- boot image via network using RARP/TFTP protocol
3140c609719bSwdenkdiskboot- boot from IDE devicebootd   - boot default, i.e., run 'bootcmd'
3141c609719bSwdenkloads	- load S-Record file over serial line
3142c609719bSwdenkloadb	- load binary file over serial line (kermit mode)
3143c609719bSwdenkmd	- memory display
3144c609719bSwdenkmm	- memory modify (auto-incrementing)
3145c609719bSwdenknm	- memory modify (constant address)
3146c609719bSwdenkmw	- memory write (fill)
3147c609719bSwdenkcp	- memory copy
3148c609719bSwdenkcmp	- memory compare
3149c609719bSwdenkcrc32	- checksum calculation
31500f89c54bSPeter Tyseri2c	- I2C sub-system
3151c609719bSwdenksspi	- SPI utility commands
3152c609719bSwdenkbase	- print or set address offset
3153c609719bSwdenkprintenv- print environment variables
3154c609719bSwdenksetenv	- set environment variables
3155c609719bSwdenksaveenv - save environment variables to persistent storage
3156c609719bSwdenkprotect - enable or disable FLASH write protection
3157c609719bSwdenkerase	- erase FLASH memory
3158c609719bSwdenkflinfo	- print FLASH memory information
3159c609719bSwdenkbdinfo	- print Board Info structure
3160c609719bSwdenkiminfo	- print header information for application image
3161c609719bSwdenkconinfo - print console devices and informations
3162c609719bSwdenkide	- IDE sub-system
3163c609719bSwdenkloop	- infinite loop on address range
316456523f12Swdenkloopw	- infinite write loop on address range
3165c609719bSwdenkmtest	- simple RAM test
3166c609719bSwdenkicache	- enable or disable instruction cache
3167c609719bSwdenkdcache	- enable or disable data cache
3168c609719bSwdenkreset	- Perform RESET of the CPU
3169c609719bSwdenkecho	- echo args to console
3170c609719bSwdenkversion - print monitor version
3171c609719bSwdenkhelp	- print online help
3172c609719bSwdenk?	- alias for 'help'
3173c609719bSwdenk
3174c609719bSwdenk
3175c609719bSwdenkMonitor Commands - Detailed Description:
3176c609719bSwdenk========================================
3177c609719bSwdenk
3178c609719bSwdenkTODO.
3179c609719bSwdenk
3180c609719bSwdenkFor now: just type "help <command>".
3181c609719bSwdenk
3182c609719bSwdenk
3183c609719bSwdenkEnvironment Variables:
3184c609719bSwdenk======================
3185c609719bSwdenk
3186c609719bSwdenkU-Boot supports user configuration using Environment Variables which
3187c609719bSwdenkcan be made persistent by saving to Flash memory.
3188c609719bSwdenk
3189c609719bSwdenkEnvironment Variables are set using "setenv", printed using
3190c609719bSwdenk"printenv", and saved to Flash using "saveenv". Using "setenv"
3191c609719bSwdenkwithout a value can be used to delete a variable from the
3192c609719bSwdenkenvironment. As long as you don't save the environment you are
3193c609719bSwdenkworking with an in-memory copy. In case the Flash area containing the
3194c609719bSwdenkenvironment is erased by accident, a default environment is provided.
3195c609719bSwdenk
3196c96f86eeSWolfgang DenkSome configuration options can be set using Environment Variables.
3197c96f86eeSWolfgang Denk
3198c96f86eeSWolfgang DenkList of environment variables (most likely not complete):
3199c609719bSwdenk
3200c609719bSwdenk  baudrate	- see CONFIG_BAUDRATE
3201c609719bSwdenk
3202c609719bSwdenk  bootdelay	- see CONFIG_BOOTDELAY
3203c609719bSwdenk
3204c609719bSwdenk  bootcmd	- see CONFIG_BOOTCOMMAND
3205c609719bSwdenk
3206c609719bSwdenk  bootargs	- Boot arguments when booting an RTOS image
3207c609719bSwdenk
3208c609719bSwdenk  bootfile	- Name of the image to load with TFTP
3209c609719bSwdenk
32107d721e34SBartlomiej Sieka  bootm_low	- Memory range available for image processing in the bootm
32117d721e34SBartlomiej Sieka		  command can be restricted. This variable is given as
32127d721e34SBartlomiej Sieka		  a hexadecimal number and defines lowest address allowed
32137d721e34SBartlomiej Sieka		  for use by the bootm command. See also "bootm_size"
32147d721e34SBartlomiej Sieka		  environment variable. Address defined by "bootm_low" is
32157d721e34SBartlomiej Sieka		  also the base of the initial memory mapping for the Linux
3216c3624e6eSGrant Likely		  kernel -- see the description of CONFIG_SYS_BOOTMAPSZ and
3217c3624e6eSGrant Likely		  bootm_mapsize.
3218c3624e6eSGrant Likely
3219c3624e6eSGrant Likely  bootm_mapsize	- Size of the initial memory mapping for the Linux kernel.
3220c3624e6eSGrant Likely		  This variable is given as a hexadecimal number and it
3221c3624e6eSGrant Likely		  defines the size of the memory region starting at base
3222c3624e6eSGrant Likely		  address bootm_low that is accessible by the Linux kernel
3223c3624e6eSGrant Likely		  during early boot.  If unset, CONFIG_SYS_BOOTMAPSZ is used
3224c3624e6eSGrant Likely		  as the default value if it is defined, and bootm_size is
3225c3624e6eSGrant Likely		  used otherwise.
32267d721e34SBartlomiej Sieka
32277d721e34SBartlomiej Sieka  bootm_size	- Memory range available for image processing in the bootm
32287d721e34SBartlomiej Sieka		  command can be restricted. This variable is given as
32297d721e34SBartlomiej Sieka		  a hexadecimal number and defines the size of the region
32307d721e34SBartlomiej Sieka		  allowed for use by the bootm command. See also "bootm_low"
32317d721e34SBartlomiej Sieka		  environment variable.
32327d721e34SBartlomiej Sieka
32334bae9090SBartlomiej Sieka  updatefile	- Location of the software update file on a TFTP server, used
32344bae9090SBartlomiej Sieka		  by the automatic software update feature. Please refer to
32354bae9090SBartlomiej Sieka		  documentation in doc/README.update for more details.
32364bae9090SBartlomiej Sieka
3237c609719bSwdenk  autoload	- if set to "no" (any string beginning with 'n'),
3238c609719bSwdenk		  "bootp" will just load perform a lookup of the
3239c609719bSwdenk		  configuration from the BOOTP server, but not try to
3240c609719bSwdenk		  load any image using TFTP
3241c609719bSwdenk
3242c609719bSwdenk  autostart	- if set to "yes", an image loaded using the "bootp",
3243c609719bSwdenk		  "rarpboot", "tftpboot" or "diskboot" commands will
3244c609719bSwdenk		  be automatically started (by internally calling
3245c609719bSwdenk		  "bootm")
3246c609719bSwdenk
32474a6fd34bSwdenk		  If set to "no", a standalone image passed to the
32484a6fd34bSwdenk		  "bootm" command will be copied to the load address
32494a6fd34bSwdenk		  (and eventually uncompressed), but NOT be started.
32504a6fd34bSwdenk		  This can be used to load and uncompress arbitrary
32514a6fd34bSwdenk		  data.
32524a6fd34bSwdenk
325317ea1177Swdenk  i2cfast	- (PPC405GP|PPC405EP only)
325417ea1177Swdenk		  if set to 'y' configures Linux I2C driver for fast
325517ea1177Swdenk		  mode (400kHZ). This environment variable is used in
325617ea1177Swdenk		  initialization code. So, for changes to be effective
325717ea1177Swdenk		  it must be saved and board must be reset.
325817ea1177Swdenk
3259c609719bSwdenk  initrd_high	- restrict positioning of initrd images:
3260c609719bSwdenk		  If this variable is not set, initrd images will be
3261c609719bSwdenk		  copied to the highest possible address in RAM; this
3262c609719bSwdenk		  is usually what you want since it allows for
3263c609719bSwdenk		  maximum initrd size. If for some reason you want to
3264c609719bSwdenk		  make sure that the initrd image is loaded below the
32656d0f6bcfSJean-Christophe PLAGNIOL-VILLARD		  CONFIG_SYS_BOOTMAPSZ limit, you can set this environment
3266c609719bSwdenk		  variable to a value of "no" or "off" or "0".
3267c609719bSwdenk		  Alternatively, you can set it to a maximum upper
3268c609719bSwdenk		  address to use (U-Boot will still check that it
3269c609719bSwdenk		  does not overwrite the U-Boot stack and data).
3270c609719bSwdenk
3271c609719bSwdenk		  For instance, when you have a system with 16 MB
32727152b1d0Swdenk		  RAM, and want to reserve 4 MB from use by Linux,
3273c609719bSwdenk		  you can do this by adding "mem=12M" to the value of
3274c609719bSwdenk		  the "bootargs" variable. However, now you must make
32757152b1d0Swdenk		  sure that the initrd image is placed in the first
3276c609719bSwdenk		  12 MB as well - this can be done with
3277c609719bSwdenk
3278c609719bSwdenk		  setenv initrd_high 00c00000
3279c609719bSwdenk
328038b99261Swdenk		  If you set initrd_high to 0xFFFFFFFF, this is an
328138b99261Swdenk		  indication to U-Boot that all addresses are legal
328238b99261Swdenk		  for the Linux kernel, including addresses in flash
328338b99261Swdenk		  memory. In this case U-Boot will NOT COPY the
328438b99261Swdenk		  ramdisk at all. This may be useful to reduce the
328538b99261Swdenk		  boot time on your system, but requires that this
328638b99261Swdenk		  feature is supported by your Linux kernel.
328738b99261Swdenk
3288c609719bSwdenk  ipaddr	- IP address; needed for tftpboot command
3289c609719bSwdenk
3290c609719bSwdenk  loadaddr	- Default load address for commands like "bootp",
3291dc7c9a1aSwdenk		  "rarpboot", "tftpboot", "loadb" or "diskboot"
3292c609719bSwdenk
3293c609719bSwdenk  loads_echo	- see CONFIG_LOADS_ECHO
3294c609719bSwdenk
3295c609719bSwdenk  serverip	- TFTP server IP address; needed for tftpboot command
3296c609719bSwdenk
3297c609719bSwdenk  bootretry	- see CONFIG_BOOT_RETRY_TIME
3298c609719bSwdenk
3299c609719bSwdenk  bootdelaykey	- see CONFIG_AUTOBOOT_DELAY_STR
3300c609719bSwdenk
3301c609719bSwdenk  bootstopkey	- see CONFIG_AUTOBOOT_STOP_STR
3302c609719bSwdenk
3303a3d991bdSwdenk  ethprime	- When CONFIG_NET_MULTI is enabled controls which
3304a3d991bdSwdenk		  interface is used first.
3305a3d991bdSwdenk
3306a3d991bdSwdenk  ethact	- When CONFIG_NET_MULTI is enabled controls which
3307a3d991bdSwdenk		  interface is currently active. For example you
3308a3d991bdSwdenk		  can do the following
3309a3d991bdSwdenk
331048690d80SHeiko Schocher		  => setenv ethact FEC
331148690d80SHeiko Schocher		  => ping 192.168.0.1 # traffic sent on FEC
331248690d80SHeiko Schocher		  => setenv ethact SCC
331348690d80SHeiko Schocher		  => ping 10.0.0.1 # traffic sent on SCC
3314a3d991bdSwdenk
3315e1692577SMatthias Fuchs  ethrotate	- When set to "no" U-Boot does not go through all
3316e1692577SMatthias Fuchs		  available network interfaces.
3317e1692577SMatthias Fuchs		  It just stays at the currently selected interface.
3318e1692577SMatthias Fuchs
3319a3d991bdSwdenk  netretry	- When set to "no" each network operation will
3320a3d991bdSwdenk		  either succeed or fail without retrying.
33216e592385Swdenk		  When set to "once" the network operation will
33226e592385Swdenk		  fail when all the available network interfaces
33236e592385Swdenk		  are tried once without success.
3324a3d991bdSwdenk		  Useful on scripts which control the retry operation
3325a3d991bdSwdenk		  themselves.
3326a3d991bdSwdenk
3327b4e2f89dSJean-Christophe PLAGNIOL-VILLARD  npe_ucode	- set load address for the NPE microcode
3328a1cf027aSJean-Christophe PLAGNIOL-VILLARD
332928cb9375SWolfgang Denk  tftpsrcport	- If this is set, the value is used for TFTP's
3330ecb0ccd9SWolfgang Denk		  UDP source port.
3331ecb0ccd9SWolfgang Denk
333228cb9375SWolfgang Denk  tftpdstport	- If this is set, the value is used for TFTP's UDP
333328cb9375SWolfgang Denk		  destination port instead of the Well Know Port 69.
333428cb9375SWolfgang Denk
3335c96f86eeSWolfgang Denk  tftpblocksize - Block size to use for TFTP transfers; if not set,
3336c96f86eeSWolfgang Denk		  we use the TFTP server's default block size
3337c96f86eeSWolfgang Denk
3338c96f86eeSWolfgang Denk  tftptimeout	- Retransmission timeout for TFTP packets (in milli-
3339c96f86eeSWolfgang Denk		  seconds, minimum value is 1000 = 1 second). Defines
3340c96f86eeSWolfgang Denk		  when a packet is considered to be lost so it has to
3341c96f86eeSWolfgang Denk		  be retransmitted. The default is 5000 = 5 seconds.
3342c96f86eeSWolfgang Denk		  Lowering this value may make downloads succeed
3343c96f86eeSWolfgang Denk		  faster in networks with high packet loss rates or
3344c96f86eeSWolfgang Denk		  with unreliable TFTP servers.
3345c96f86eeSWolfgang Denk
3346a3d991bdSwdenk  vlan		- When set to a value < 4095 the traffic over
334711ccc33fSMarcel Ziswiler		  Ethernet is encapsulated/received over 802.1q
3348a3d991bdSwdenk		  VLAN tagged frames.
3349c609719bSwdenk
3350c609719bSwdenkThe following environment variables may be used and automatically
3351c609719bSwdenkupdated by the network boot commands ("bootp" and "rarpboot"),
3352c609719bSwdenkdepending the information provided by your boot server:
3353c609719bSwdenk
3354c609719bSwdenk  bootfile	- see above
3355c609719bSwdenk  dnsip		- IP address of your Domain Name Server
3356fe389a82Sstroese  dnsip2	- IP address of your secondary Domain Name Server
3357c609719bSwdenk  gatewayip	- IP address of the Gateway (Router) to use
3358c609719bSwdenk  hostname	- Target hostname
3359c609719bSwdenk  ipaddr	- see above
3360c609719bSwdenk  netmask	- Subnet Mask
3361c609719bSwdenk  rootpath	- Pathname of the root filesystem on the NFS server
3362c609719bSwdenk  serverip	- see above
3363c609719bSwdenk
3364c609719bSwdenk
3365c609719bSwdenkThere are two special Environment Variables:
3366c609719bSwdenk
3367c609719bSwdenk  serial#	- contains hardware identification information such
3368c609719bSwdenk		  as type string and/or serial number
3369c609719bSwdenk  ethaddr	- Ethernet address
3370c609719bSwdenk
3371c609719bSwdenkThese variables can be set only once (usually during manufacturing of
3372c609719bSwdenkthe board). U-Boot refuses to delete or overwrite these variables
3373c609719bSwdenkonce they have been set once.
3374c609719bSwdenk
3375c609719bSwdenk
3376c1551ea8SstroeseFurther special Environment Variables:
3377c1551ea8Sstroese
3378c1551ea8Sstroese  ver		- Contains the U-Boot version string as printed
3379c1551ea8Sstroese		  with the "version" command. This variable is
3380c1551ea8Sstroese		  readonly (see CONFIG_VERSION_VARIABLE).
3381c1551ea8Sstroese
3382c1551ea8Sstroese
3383c609719bSwdenkPlease note that changes to some configuration parameters may take
3384c609719bSwdenkonly effect after the next boot (yes, that's just like Windoze :-).
3385c609719bSwdenk
3386c609719bSwdenk
3387f07771ccSwdenkCommand Line Parsing:
3388f07771ccSwdenk=====================
3389f07771ccSwdenk
3390f07771ccSwdenkThere are two different command line parsers available with U-Boot:
33917152b1d0Swdenkthe old "simple" one, and the much more powerful "hush" shell:
3392f07771ccSwdenk
3393f07771ccSwdenkOld, simple command line parser:
3394f07771ccSwdenk--------------------------------
3395f07771ccSwdenk
3396f07771ccSwdenk- supports environment variables (through setenv / saveenv commands)
3397f07771ccSwdenk- several commands on one line, separated by ';'
3398fe126d8bSWolfgang Denk- variable substitution using "... ${name} ..." syntax
3399f07771ccSwdenk- special characters ('$', ';') can be escaped by prefixing with '\',
3400f07771ccSwdenk  for example:
3401fe126d8bSWolfgang Denk	setenv bootcmd bootm \${address}
3402f07771ccSwdenk- You can also escape text by enclosing in single apostrophes, for example:
3403f07771ccSwdenk	setenv addip 'setenv bootargs $bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off'
3404f07771ccSwdenk
3405f07771ccSwdenkHush shell:
3406f07771ccSwdenk-----------
3407f07771ccSwdenk
3408f07771ccSwdenk- similar to Bourne shell, with control structures like
3409f07771ccSwdenk  if...then...else...fi, for...do...done; while...do...done,
3410f07771ccSwdenk  until...do...done, ...
3411f07771ccSwdenk- supports environment ("global") variables (through setenv / saveenv
3412f07771ccSwdenk  commands) and local shell variables (through standard shell syntax
3413f07771ccSwdenk  "name=value"); only environment variables can be used with "run"
3414f07771ccSwdenk  command
3415f07771ccSwdenk
3416f07771ccSwdenkGeneral rules:
3417f07771ccSwdenk--------------
3418f07771ccSwdenk
3419f07771ccSwdenk(1) If a command line (or an environment variable executed by a "run"
3420f07771ccSwdenk    command) contains several commands separated by semicolon, and
3421f07771ccSwdenk    one of these commands fails, then the remaining commands will be
3422f07771ccSwdenk    executed anyway.
3423f07771ccSwdenk
3424f07771ccSwdenk(2) If you execute several variables with one call to run (i. e.
342511ccc33fSMarcel Ziswiler    calling run with a list of variables as arguments), any failing
3426f07771ccSwdenk    command will cause "run" to terminate, i. e. the remaining
3427f07771ccSwdenk    variables are not executed.
3428f07771ccSwdenk
3429c609719bSwdenkNote for Redundant Ethernet Interfaces:
3430c609719bSwdenk=======================================
3431c609719bSwdenk
343211ccc33fSMarcel ZiswilerSome boards come with redundant Ethernet interfaces; U-Boot supports
3433c609719bSwdenksuch configurations and is capable of automatic selection of a
34347152b1d0Swdenk"working" interface when needed. MAC assignment works as follows:
3435c609719bSwdenk
3436c609719bSwdenkNetwork interfaces are numbered eth0, eth1, eth2, ... Corresponding
3437c609719bSwdenkMAC addresses can be stored in the environment as "ethaddr" (=>eth0),
3438c609719bSwdenk"eth1addr" (=>eth1), "eth2addr", ...
3439c609719bSwdenk
3440c609719bSwdenkIf the network interface stores some valid MAC address (for instance
3441c609719bSwdenkin SROM), this is used as default address if there is NO correspon-
3442c609719bSwdenkding setting in the environment; if the corresponding environment
3443c609719bSwdenkvariable is set, this overrides the settings in the card; that means:
3444c609719bSwdenk
3445c609719bSwdenko If the SROM has a valid MAC address, and there is no address in the
3446c609719bSwdenk  environment, the SROM's address is used.
3447c609719bSwdenk
3448c609719bSwdenko If there is no valid address in the SROM, and a definition in the
3449c609719bSwdenk  environment exists, then the value from the environment variable is
3450c609719bSwdenk  used.
3451c609719bSwdenk
3452c609719bSwdenko If both the SROM and the environment contain a MAC address, and
3453c609719bSwdenk  both addresses are the same, this MAC address is used.
3454c609719bSwdenk
3455c609719bSwdenko If both the SROM and the environment contain a MAC address, and the
3456c609719bSwdenk  addresses differ, the value from the environment is used and a
3457c609719bSwdenk  warning is printed.
3458c609719bSwdenk
3459c609719bSwdenko If neither SROM nor the environment contain a MAC address, an error
3460c609719bSwdenk  is raised.
3461c609719bSwdenk
3462ecee9324SBen WarrenIf Ethernet drivers implement the 'write_hwaddr' function, valid MAC addresses
3463ecee9324SBen Warrenwill be programmed into hardware as part of the initialization process.  This
3464ecee9324SBen Warrenmay be skipped by setting the appropriate 'ethmacskip' environment variable.
3465ecee9324SBen WarrenThe naming convention is as follows:
3466ecee9324SBen Warren"ethmacskip" (=>eth0), "eth1macskip" (=>eth1) etc.
3467c609719bSwdenk
3468c609719bSwdenkImage Formats:
3469c609719bSwdenk==============
3470c609719bSwdenk
34713310c549SMarian BalakowiczU-Boot is capable of booting (and performing other auxiliary operations on)
34723310c549SMarian Balakowiczimages in two formats:
34733310c549SMarian Balakowicz
34743310c549SMarian BalakowiczNew uImage format (FIT)
34753310c549SMarian Balakowicz-----------------------
34763310c549SMarian Balakowicz
34773310c549SMarian BalakowiczFlexible and powerful format based on Flattened Image Tree -- FIT (similar
34783310c549SMarian Balakowiczto Flattened Device Tree). It allows the use of images with multiple
34793310c549SMarian Balakowiczcomponents (several kernels, ramdisks, etc.), with contents protected by
34803310c549SMarian BalakowiczSHA1, MD5 or CRC32. More details are found in the doc/uImage.FIT directory.
34813310c549SMarian Balakowicz
34823310c549SMarian Balakowicz
34833310c549SMarian BalakowiczOld uImage format
34843310c549SMarian Balakowicz-----------------
34853310c549SMarian Balakowicz
34863310c549SMarian BalakowiczOld image format is based on binary files which can be basically anything,
34873310c549SMarian Balakowiczpreceded by a special header; see the definitions in include/image.h for
34883310c549SMarian Balakowiczdetails; basically, the header defines the following image properties:
3489c609719bSwdenk
3490c609719bSwdenk* Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD,
3491c609719bSwdenk  4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks,
3492f5ed9e39SPeter Tyser  LynxOS, pSOS, QNX, RTEMS, INTEGRITY;
3493f5ed9e39SPeter Tyser  Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS,
3494f5ed9e39SPeter Tyser  INTEGRITY).
34957b64fef3SWolfgang Denk* Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86,
34961117cbf2SThomas Chou  IA64, MIPS, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
34971117cbf2SThomas Chou  Currently supported: ARM, AVR32, Intel x86, MIPS, Nios II, PowerPC).
3498c29fdfc1Swdenk* Compression Type (uncompressed, gzip, bzip2)
3499c609719bSwdenk* Load Address
3500c609719bSwdenk* Entry Point
3501c609719bSwdenk* Image Name
3502c609719bSwdenk* Image Timestamp
3503c609719bSwdenk
3504c609719bSwdenkThe header is marked by a special Magic Number, and both the header
3505c609719bSwdenkand the data portions of the image are secured against corruption by
3506c609719bSwdenkCRC32 checksums.
3507c609719bSwdenk
3508c609719bSwdenk
3509c609719bSwdenkLinux Support:
3510c609719bSwdenk==============
3511c609719bSwdenk
3512c609719bSwdenkAlthough U-Boot should support any OS or standalone application
35137152b1d0Swdenkeasily, the main focus has always been on Linux during the design of
3514c609719bSwdenkU-Boot.
3515c609719bSwdenk
3516c609719bSwdenkU-Boot includes many features that so far have been part of some
3517c609719bSwdenkspecial "boot loader" code within the Linux kernel. Also, any
3518c609719bSwdenk"initrd" images to be used are no longer part of one big Linux image;
3519c609719bSwdenkinstead, kernel and "initrd" are separate images. This implementation
35207152b1d0Swdenkserves several purposes:
3521c609719bSwdenk
3522c609719bSwdenk- the same features can be used for other OS or standalone
3523c609719bSwdenk  applications (for instance: using compressed images to reduce the
3524c609719bSwdenk  Flash memory footprint)
3525c609719bSwdenk
3526c609719bSwdenk- it becomes much easier to port new Linux kernel versions because
35277152b1d0Swdenk  lots of low-level, hardware dependent stuff are done by U-Boot
3528c609719bSwdenk
3529c609719bSwdenk- the same Linux kernel image can now be used with different "initrd"
3530c609719bSwdenk  images; of course this also means that different kernel images can
3531c609719bSwdenk  be run with the same "initrd". This makes testing easier (you don't
3532c609719bSwdenk  have to build a new "zImage.initrd" Linux image when you just
3533c609719bSwdenk  change a file in your "initrd"). Also, a field-upgrade of the
3534c609719bSwdenk  software is easier now.
3535c609719bSwdenk
3536c609719bSwdenk
3537c609719bSwdenkLinux HOWTO:
3538c609719bSwdenk============
3539c609719bSwdenk
3540c609719bSwdenkPorting Linux to U-Boot based systems:
3541c609719bSwdenk---------------------------------------
3542c609719bSwdenk
3543c609719bSwdenkU-Boot cannot save you from doing all the necessary modifications to
3544c609719bSwdenkconfigure the Linux device drivers for use with your target hardware
3545c609719bSwdenk(no, we don't intend to provide a full virtual machine interface to
3546c609719bSwdenkLinux :-).
3547c609719bSwdenk
3548a47a12beSStefan RoeseBut now you can ignore ALL boot loader code (in arch/powerpc/mbxboot).
3549c609719bSwdenk
3550c609719bSwdenkJust make sure your machine specific header file (for instance
3551c609719bSwdenkinclude/asm-ppc/tqm8xx.h) includes the same definition of the Board
35521dc30693SMarkus HeidelbergInformation structure as we define in include/asm-<arch>/u-boot.h,
35531dc30693SMarkus Heidelbergand make sure that your definition of IMAP_ADDR uses the same value
35546d0f6bcfSJean-Christophe PLAGNIOL-VILLARDas your U-Boot configuration in CONFIG_SYS_IMMR.
3555c609719bSwdenk
3556c609719bSwdenk
3557c609719bSwdenkConfiguring the Linux kernel:
3558c609719bSwdenk-----------------------------
3559c609719bSwdenk
3560c609719bSwdenkNo specific requirements for U-Boot. Make sure you have some root
3561c609719bSwdenkdevice (initial ramdisk, NFS) for your target system.
3562c609719bSwdenk
3563c609719bSwdenk
3564c609719bSwdenkBuilding a Linux Image:
3565c609719bSwdenk-----------------------
3566c609719bSwdenk
356724ee89b9SwdenkWith U-Boot, "normal" build targets like "zImage" or "bzImage" are
356824ee89b9Swdenknot used. If you use recent kernel source, a new build target
356924ee89b9Swdenk"uImage" will exist which automatically builds an image usable by
357024ee89b9SwdenkU-Boot. Most older kernels also have support for a "pImage" target,
357124ee89b9Swdenkwhich was introduced for our predecessor project PPCBoot and uses a
357224ee89b9Swdenk100% compatible format.
3573c609719bSwdenk
3574c609719bSwdenkExample:
3575c609719bSwdenk
3576c609719bSwdenk	make TQM850L_config
3577c609719bSwdenk	make oldconfig
3578c609719bSwdenk	make dep
357924ee89b9Swdenk	make uImage
3580c609719bSwdenk
358124ee89b9SwdenkThe "uImage" build target uses a special tool (in 'tools/mkimage') to
358224ee89b9Swdenkencapsulate a compressed Linux kernel image with header	 information,
358324ee89b9SwdenkCRC32 checksum etc. for use with U-Boot. This is what we are doing:
3584c609719bSwdenk
358524ee89b9Swdenk* build a standard "vmlinux" kernel image (in ELF binary format):
358624ee89b9Swdenk
358724ee89b9Swdenk* convert the kernel into a raw binary image:
358824ee89b9Swdenk
358924ee89b9Swdenk	${CROSS_COMPILE}-objcopy -O binary \
359024ee89b9Swdenk				 -R .note -R .comment \
359124ee89b9Swdenk				 -S vmlinux linux.bin
359224ee89b9Swdenk
359324ee89b9Swdenk* compress the binary image:
359424ee89b9Swdenk
359524ee89b9Swdenk	gzip -9 linux.bin
359624ee89b9Swdenk
359724ee89b9Swdenk* package compressed binary image for U-Boot:
359824ee89b9Swdenk
359924ee89b9Swdenk	mkimage -A ppc -O linux -T kernel -C gzip \
360024ee89b9Swdenk		-a 0 -e 0 -n "Linux Kernel Image" \
360124ee89b9Swdenk		-d linux.bin.gz uImage
360224ee89b9Swdenk
360324ee89b9Swdenk
360424ee89b9SwdenkThe "mkimage" tool can also be used to create ramdisk images for use
360524ee89b9Swdenkwith U-Boot, either separated from the Linux kernel image, or
360624ee89b9Swdenkcombined into one file. "mkimage" encapsulates the images with a 64
360724ee89b9Swdenkbyte header containing information about target architecture,
360824ee89b9Swdenkoperating system, image type, compression method, entry points, time
360924ee89b9Swdenkstamp, CRC32 checksums, etc.
361024ee89b9Swdenk
361124ee89b9Swdenk"mkimage" can be called in two ways: to verify existing images and
361224ee89b9Swdenkprint the header information, or to build new images.
3613c609719bSwdenk
3614c609719bSwdenkIn the first form (with "-l" option) mkimage lists the information
3615c609719bSwdenkcontained in the header of an existing U-Boot image; this includes
3616c609719bSwdenkchecksum verification:
3617c609719bSwdenk
3618c609719bSwdenk	tools/mkimage -l image
3619c609719bSwdenk	  -l ==> list image header information
3620c609719bSwdenk
3621c609719bSwdenkThe second form (with "-d" option) is used to build a U-Boot image
3622c609719bSwdenkfrom a "data file" which is used as image payload:
3623c609719bSwdenk
3624c609719bSwdenk	tools/mkimage -A arch -O os -T type -C comp -a addr -e ep \
3625c609719bSwdenk		      -n name -d data_file image
3626c609719bSwdenk	  -A ==> set architecture to 'arch'
3627c609719bSwdenk	  -O ==> set operating system to 'os'
3628c609719bSwdenk	  -T ==> set image type to 'type'
3629c609719bSwdenk	  -C ==> set compression type 'comp'
3630c609719bSwdenk	  -a ==> set load address to 'addr' (hex)
3631c609719bSwdenk	  -e ==> set entry point to 'ep' (hex)
3632c609719bSwdenk	  -n ==> set image name to 'name'
3633c609719bSwdenk	  -d ==> use image data from 'datafile'
3634c609719bSwdenk
363569459791SwdenkRight now, all Linux kernels for PowerPC systems use the same load
363669459791Swdenkaddress (0x00000000), but the entry point address depends on the
363769459791Swdenkkernel version:
3638c609719bSwdenk
3639c609719bSwdenk- 2.2.x kernels have the entry point at 0x0000000C,
364024ee89b9Swdenk- 2.3.x and later kernels have the entry point at 0x00000000.
3641c609719bSwdenk
3642c609719bSwdenkSo a typical call to build a U-Boot image would read:
3643c609719bSwdenk
364424ee89b9Swdenk	-> tools/mkimage -n '2.4.4 kernel for TQM850L' \
364524ee89b9Swdenk	> -A ppc -O linux -T kernel -C gzip -a 0 -e 0 \
3646a47a12beSStefan Roese	> -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz \
364724ee89b9Swdenk	> examples/uImage.TQM850L
364824ee89b9Swdenk	Image Name:   2.4.4 kernel for TQM850L
3649c609719bSwdenk	Created:      Wed Jul 19 02:34:59 2000
3650c609719bSwdenk	Image Type:   PowerPC Linux Kernel Image (gzip compressed)
3651c609719bSwdenk	Data Size:    335725 Bytes = 327.86 kB = 0.32 MB
3652c609719bSwdenk	Load Address: 0x00000000
365324ee89b9Swdenk	Entry Point:  0x00000000
3654c609719bSwdenk
3655c609719bSwdenkTo verify the contents of the image (or check for corruption):
3656c609719bSwdenk
365724ee89b9Swdenk	-> tools/mkimage -l examples/uImage.TQM850L
365824ee89b9Swdenk	Image Name:   2.4.4 kernel for TQM850L
3659c609719bSwdenk	Created:      Wed Jul 19 02:34:59 2000
3660c609719bSwdenk	Image Type:   PowerPC Linux Kernel Image (gzip compressed)
3661c609719bSwdenk	Data Size:    335725 Bytes = 327.86 kB = 0.32 MB
3662c609719bSwdenk	Load Address: 0x00000000
366324ee89b9Swdenk	Entry Point:  0x00000000
3664c609719bSwdenk
3665c609719bSwdenkNOTE: for embedded systems where boot time is critical you can trade
3666c609719bSwdenkspeed for memory and install an UNCOMPRESSED image instead: this
3667c609719bSwdenkneeds more space in Flash, but boots much faster since it does not
3668c609719bSwdenkneed to be uncompressed:
3669c609719bSwdenk
3670a47a12beSStefan Roese	-> gunzip /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz
367124ee89b9Swdenk	-> tools/mkimage -n '2.4.4 kernel for TQM850L' \
367224ee89b9Swdenk	> -A ppc -O linux -T kernel -C none -a 0 -e 0 \
3673a47a12beSStefan Roese	> -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux \
367424ee89b9Swdenk	> examples/uImage.TQM850L-uncompressed
367524ee89b9Swdenk	Image Name:   2.4.4 kernel for TQM850L
3676c609719bSwdenk	Created:      Wed Jul 19 02:34:59 2000
3677c609719bSwdenk	Image Type:   PowerPC Linux Kernel Image (uncompressed)
3678c609719bSwdenk	Data Size:    792160 Bytes = 773.59 kB = 0.76 MB
3679c609719bSwdenk	Load Address: 0x00000000
368024ee89b9Swdenk	Entry Point:  0x00000000
3681c609719bSwdenk
3682c609719bSwdenk
3683c609719bSwdenkSimilar you can build U-Boot images from a 'ramdisk.image.gz' file
3684c609719bSwdenkwhen your kernel is intended to use an initial ramdisk:
3685c609719bSwdenk
3686c609719bSwdenk	-> tools/mkimage -n 'Simple Ramdisk Image' \
3687c609719bSwdenk	> -A ppc -O linux -T ramdisk -C gzip \
3688c609719bSwdenk	> -d /LinuxPPC/images/SIMPLE-ramdisk.image.gz examples/simple-initrd
3689c609719bSwdenk	Image Name:   Simple Ramdisk Image
3690c609719bSwdenk	Created:      Wed Jan 12 14:01:50 2000
3691c609719bSwdenk	Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
3692c609719bSwdenk	Data Size:    566530 Bytes = 553.25 kB = 0.54 MB
3693c609719bSwdenk	Load Address: 0x00000000
3694c609719bSwdenk	Entry Point:  0x00000000
3695c609719bSwdenk
3696c609719bSwdenk
3697c609719bSwdenkInstalling a Linux Image:
3698c609719bSwdenk-------------------------
3699c609719bSwdenk
3700c609719bSwdenkTo downloading a U-Boot image over the serial (console) interface,
3701c609719bSwdenkyou must convert the image to S-Record format:
3702c609719bSwdenk
3703c609719bSwdenk	objcopy -I binary -O srec examples/image examples/image.srec
3704c609719bSwdenk
3705c609719bSwdenkThe 'objcopy' does not understand the information in the U-Boot
3706c609719bSwdenkimage header, so the resulting S-Record file will be relative to
3707c609719bSwdenkaddress 0x00000000. To load it to a given address, you need to
3708c609719bSwdenkspecify the target address as 'offset' parameter with the 'loads'
3709c609719bSwdenkcommand.
3710c609719bSwdenk
3711c609719bSwdenkExample: install the image to address 0x40100000 (which on the
3712c609719bSwdenkTQM8xxL is in the first Flash bank):
3713c609719bSwdenk
3714c609719bSwdenk	=> erase 40100000 401FFFFF
3715c609719bSwdenk
3716c609719bSwdenk	.......... done
3717c609719bSwdenk	Erased 8 sectors
3718c609719bSwdenk
3719c609719bSwdenk	=> loads 40100000
3720c609719bSwdenk	## Ready for S-Record download ...
3721c609719bSwdenk	~>examples/image.srec
3722c609719bSwdenk	1 2 3 4 5 6 7 8 9 10 11 12 13 ...
3723c609719bSwdenk	...
3724c609719bSwdenk	15989 15990 15991 15992
3725c609719bSwdenk	[file transfer complete]
3726c609719bSwdenk	[connected]
3727c609719bSwdenk	## Start Addr = 0x00000000
3728c609719bSwdenk
3729c609719bSwdenk
3730c609719bSwdenkYou can check the success of the download using the 'iminfo' command;
3731c609719bSwdenkthis includes a checksum verification so you can be sure no data
3732c609719bSwdenkcorruption happened:
3733c609719bSwdenk
3734c609719bSwdenk	=> imi 40100000
3735c609719bSwdenk
3736c609719bSwdenk	## Checking Image at 40100000 ...
3737c609719bSwdenk	   Image Name:	 2.2.13 for initrd on TQM850L
3738c609719bSwdenk	   Image Type:	 PowerPC Linux Kernel Image (gzip compressed)
3739c609719bSwdenk	   Data Size:	 335725 Bytes = 327 kB = 0 MB
3740c609719bSwdenk	   Load Address: 00000000
3741c609719bSwdenk	   Entry Point:	 0000000c
3742c609719bSwdenk	   Verifying Checksum ... OK
3743c609719bSwdenk
3744c609719bSwdenk
3745c609719bSwdenkBoot Linux:
3746c609719bSwdenk-----------
3747c609719bSwdenk
3748c609719bSwdenkThe "bootm" command is used to boot an application that is stored in
3749c609719bSwdenkmemory (RAM or Flash). In case of a Linux kernel image, the contents
3750c609719bSwdenkof the "bootargs" environment variable is passed to the kernel as
3751c609719bSwdenkparameters. You can check and modify this variable using the
3752c609719bSwdenk"printenv" and "setenv" commands:
3753c609719bSwdenk
3754c609719bSwdenk
3755c609719bSwdenk	=> printenv bootargs
3756c609719bSwdenk	bootargs=root=/dev/ram
3757c609719bSwdenk
3758c609719bSwdenk	=> setenv bootargs root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2
3759c609719bSwdenk
3760c609719bSwdenk	=> printenv bootargs
3761c609719bSwdenk	bootargs=root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2
3762c609719bSwdenk
3763c609719bSwdenk	=> bootm 40020000
3764c609719bSwdenk	## Booting Linux kernel at 40020000 ...
3765c609719bSwdenk	   Image Name:	 2.2.13 for NFS on TQM850L
3766c609719bSwdenk	   Image Type:	 PowerPC Linux Kernel Image (gzip compressed)
3767c609719bSwdenk	   Data Size:	 381681 Bytes = 372 kB = 0 MB
3768c609719bSwdenk	   Load Address: 00000000
3769c609719bSwdenk	   Entry Point:	 0000000c
3770c609719bSwdenk	   Verifying Checksum ... OK
3771c609719bSwdenk	   Uncompressing Kernel Image ... OK
3772c609719bSwdenk	Linux version 2.2.13 (wd@denx.local.net) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 19 02:35:17 MEST 2000
3773c609719bSwdenk	Boot arguments: root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2
3774c609719bSwdenk	time_init: decrementer frequency = 187500000/60
3775c609719bSwdenk	Calibrating delay loop... 49.77 BogoMIPS
3776c609719bSwdenk	Memory: 15208k available (700k kernel code, 444k data, 32k init) [c0000000,c1000000]
3777c609719bSwdenk	...
3778c609719bSwdenk
377911ccc33fSMarcel ZiswilerIf you want to boot a Linux kernel with initial RAM disk, you pass
37807152b1d0Swdenkthe memory addresses of both the kernel and the initrd image (PPBCOOT
3781c609719bSwdenkformat!) to the "bootm" command:
3782c609719bSwdenk
3783c609719bSwdenk	=> imi 40100000 40200000
3784c609719bSwdenk
3785c609719bSwdenk	## Checking Image at 40100000 ...
3786c609719bSwdenk	   Image Name:	 2.2.13 for initrd on TQM850L
3787c609719bSwdenk	   Image Type:	 PowerPC Linux Kernel Image (gzip compressed)
3788c609719bSwdenk	   Data Size:	 335725 Bytes = 327 kB = 0 MB
3789c609719bSwdenk	   Load Address: 00000000
3790c609719bSwdenk	   Entry Point:	 0000000c
3791c609719bSwdenk	   Verifying Checksum ... OK
3792c609719bSwdenk
3793c609719bSwdenk	## Checking Image at 40200000 ...
3794c609719bSwdenk	   Image Name:	 Simple Ramdisk Image
3795c609719bSwdenk	   Image Type:	 PowerPC Linux RAMDisk Image (gzip compressed)
3796c609719bSwdenk	   Data Size:	 566530 Bytes = 553 kB = 0 MB
3797c609719bSwdenk	   Load Address: 00000000
3798c609719bSwdenk	   Entry Point:	 00000000
3799c609719bSwdenk	   Verifying Checksum ... OK
3800c609719bSwdenk
3801c609719bSwdenk	=> bootm 40100000 40200000
3802c609719bSwdenk	## Booting Linux kernel at 40100000 ...
3803c609719bSwdenk	   Image Name:	 2.2.13 for initrd on TQM850L
3804c609719bSwdenk	   Image Type:	 PowerPC Linux Kernel Image (gzip compressed)
3805c609719bSwdenk	   Data Size:	 335725 Bytes = 327 kB = 0 MB
3806c609719bSwdenk	   Load Address: 00000000
3807c609719bSwdenk	   Entry Point:	 0000000c
3808c609719bSwdenk	   Verifying Checksum ... OK
3809c609719bSwdenk	   Uncompressing Kernel Image ... OK
3810c609719bSwdenk	## Loading RAMDisk Image at 40200000 ...
3811c609719bSwdenk	   Image Name:	 Simple Ramdisk Image
3812c609719bSwdenk	   Image Type:	 PowerPC Linux RAMDisk Image (gzip compressed)
3813c609719bSwdenk	   Data Size:	 566530 Bytes = 553 kB = 0 MB
3814c609719bSwdenk	   Load Address: 00000000
3815c609719bSwdenk	   Entry Point:	 00000000
3816c609719bSwdenk	   Verifying Checksum ... OK
3817c609719bSwdenk	   Loading Ramdisk ... OK
3818c609719bSwdenk	Linux version 2.2.13 (wd@denx.local.net) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 19 02:32:08 MEST 2000
3819c609719bSwdenk	Boot arguments: root=/dev/ram
3820c609719bSwdenk	time_init: decrementer frequency = 187500000/60
3821c609719bSwdenk	Calibrating delay loop... 49.77 BogoMIPS
3822c609719bSwdenk	...
3823c609719bSwdenk	RAMDISK: Compressed image found at block 0
3824c609719bSwdenk	VFS: Mounted root (ext2 filesystem).
3825c609719bSwdenk
3826c609719bSwdenk	bash#
3827c609719bSwdenk
38280267768eSMatthew McClintockBoot Linux and pass a flat device tree:
38290267768eSMatthew McClintock-----------
38300267768eSMatthew McClintock
38310267768eSMatthew McClintockFirst, U-Boot must be compiled with the appropriate defines. See the section
38320267768eSMatthew McClintocktitled "Linux Kernel Interface" above for a more in depth explanation. The
38330267768eSMatthew McClintockfollowing is an example of how to start a kernel and pass an updated
38340267768eSMatthew McClintockflat device tree:
38350267768eSMatthew McClintock
38360267768eSMatthew McClintock=> print oftaddr
38370267768eSMatthew McClintockoftaddr=0x300000
38380267768eSMatthew McClintock=> print oft
38390267768eSMatthew McClintockoft=oftrees/mpc8540ads.dtb
38400267768eSMatthew McClintock=> tftp $oftaddr $oft
38410267768eSMatthew McClintockSpeed: 1000, full duplex
38420267768eSMatthew McClintockUsing TSEC0 device
38430267768eSMatthew McClintockTFTP from server 192.168.1.1; our IP address is 192.168.1.101
38440267768eSMatthew McClintockFilename 'oftrees/mpc8540ads.dtb'.
38450267768eSMatthew McClintockLoad address: 0x300000
38460267768eSMatthew McClintockLoading: #
38470267768eSMatthew McClintockdone
38480267768eSMatthew McClintockBytes transferred = 4106 (100a hex)
38490267768eSMatthew McClintock=> tftp $loadaddr $bootfile
38500267768eSMatthew McClintockSpeed: 1000, full duplex
38510267768eSMatthew McClintockUsing TSEC0 device
38520267768eSMatthew McClintockTFTP from server 192.168.1.1; our IP address is 192.168.1.2
38530267768eSMatthew McClintockFilename 'uImage'.
38540267768eSMatthew McClintockLoad address: 0x200000
38550267768eSMatthew McClintockLoading:############
38560267768eSMatthew McClintockdone
38570267768eSMatthew McClintockBytes transferred = 1029407 (fb51f hex)
38580267768eSMatthew McClintock=> print loadaddr
38590267768eSMatthew McClintockloadaddr=200000
38600267768eSMatthew McClintock=> print oftaddr
38610267768eSMatthew McClintockoftaddr=0x300000
38620267768eSMatthew McClintock=> bootm $loadaddr - $oftaddr
38630267768eSMatthew McClintock## Booting image at 00200000 ...
38640267768eSMatthew McClintock   Image Name:	 Linux-2.6.17-dirty
38650267768eSMatthew McClintock   Image Type:	 PowerPC Linux Kernel Image (gzip compressed)
38660267768eSMatthew McClintock   Data Size:	 1029343 Bytes = 1005.2 kB
38670267768eSMatthew McClintock   Load Address: 00000000
38680267768eSMatthew McClintock   Entry Point:	 00000000
38690267768eSMatthew McClintock   Verifying Checksum ... OK
38700267768eSMatthew McClintock   Uncompressing Kernel Image ... OK
38710267768eSMatthew McClintockBooting using flat device tree at 0x300000
38720267768eSMatthew McClintockUsing MPC85xx ADS machine description
38730267768eSMatthew McClintockMemory CAM mapping: CAM0=256Mb, CAM1=256Mb, CAM2=0Mb residual: 0Mb
38740267768eSMatthew McClintock[snip]
38750267768eSMatthew McClintock
38760267768eSMatthew McClintock
38776069ff26SwdenkMore About U-Boot Image Types:
38786069ff26Swdenk------------------------------
38796069ff26Swdenk
38806069ff26SwdenkU-Boot supports the following image types:
38816069ff26Swdenk
38826069ff26Swdenk   "Standalone Programs" are directly runnable in the environment
38836069ff26Swdenk	provided by U-Boot; it is expected that (if they behave
38846069ff26Swdenk	well) you can continue to work in U-Boot after return from
38856069ff26Swdenk	the Standalone Program.
38866069ff26Swdenk   "OS Kernel Images" are usually images of some Embedded OS which
38876069ff26Swdenk	will take over control completely. Usually these programs
38886069ff26Swdenk	will install their own set of exception handlers, device
38896069ff26Swdenk	drivers, set up the MMU, etc. - this means, that you cannot
38906069ff26Swdenk	expect to re-enter U-Boot except by resetting the CPU.
38916069ff26Swdenk   "RAMDisk Images" are more or less just data blocks, and their
38926069ff26Swdenk	parameters (address, size) are passed to an OS kernel that is
38936069ff26Swdenk	being started.
38946069ff26Swdenk   "Multi-File Images" contain several images, typically an OS
38956069ff26Swdenk	(Linux) kernel image and one or more data images like
38966069ff26Swdenk	RAMDisks. This construct is useful for instance when you want
38976069ff26Swdenk	to boot over the network using BOOTP etc., where the boot
38986069ff26Swdenk	server provides just a single image file, but you want to get
38996069ff26Swdenk	for instance an OS kernel and a RAMDisk image.
39006069ff26Swdenk
39016069ff26Swdenk	"Multi-File Images" start with a list of image sizes, each
39026069ff26Swdenk	image size (in bytes) specified by an "uint32_t" in network
39036069ff26Swdenk	byte order. This list is terminated by an "(uint32_t)0".
39046069ff26Swdenk	Immediately after the terminating 0 follow the images, one by
39056069ff26Swdenk	one, all aligned on "uint32_t" boundaries (size rounded up to
39066069ff26Swdenk	a multiple of 4 bytes).
39076069ff26Swdenk
39086069ff26Swdenk   "Firmware Images" are binary images containing firmware (like
39096069ff26Swdenk	U-Boot or FPGA images) which usually will be programmed to
39106069ff26Swdenk	flash memory.
39116069ff26Swdenk
39126069ff26Swdenk   "Script files" are command sequences that will be executed by
39136069ff26Swdenk	U-Boot's command interpreter; this feature is especially
39146069ff26Swdenk	useful when you configure U-Boot to use a real shell (hush)
39156069ff26Swdenk	as command interpreter.
39166069ff26Swdenk
3917c609719bSwdenk
3918c609719bSwdenkStandalone HOWTO:
3919c609719bSwdenk=================
3920c609719bSwdenk
3921c609719bSwdenkOne of the features of U-Boot is that you can dynamically load and
3922c609719bSwdenkrun "standalone" applications, which can use some resources of
3923c609719bSwdenkU-Boot like console I/O functions or interrupt services.
3924c609719bSwdenk
3925c609719bSwdenkTwo simple examples are included with the sources:
3926c609719bSwdenk
3927c609719bSwdenk"Hello World" Demo:
3928c609719bSwdenk-------------------
3929c609719bSwdenk
3930c609719bSwdenk'examples/hello_world.c' contains a small "Hello World" Demo
3931c609719bSwdenkapplication; it is automatically compiled when you build U-Boot.
3932c609719bSwdenkIt's configured to run at address 0x00040004, so you can play with it
3933c609719bSwdenklike that:
3934c609719bSwdenk
3935c609719bSwdenk	=> loads
3936c609719bSwdenk	## Ready for S-Record download ...
3937c609719bSwdenk	~>examples/hello_world.srec
3938c609719bSwdenk	1 2 3 4 5 6 7 8 9 10 11 ...
3939c609719bSwdenk	[file transfer complete]
3940c609719bSwdenk	[connected]
3941c609719bSwdenk	## Start Addr = 0x00040004
3942c609719bSwdenk
3943c609719bSwdenk	=> go 40004 Hello World! This is a test.
3944c609719bSwdenk	## Starting application at 0x00040004 ...
3945c609719bSwdenk	Hello World
3946c609719bSwdenk	argc = 7
3947c609719bSwdenk	argv[0] = "40004"
3948c609719bSwdenk	argv[1] = "Hello"
3949c609719bSwdenk	argv[2] = "World!"
3950c609719bSwdenk	argv[3] = "This"
3951c609719bSwdenk	argv[4] = "is"
3952c609719bSwdenk	argv[5] = "a"
3953c609719bSwdenk	argv[6] = "test."
3954c609719bSwdenk	argv[7] = "<NULL>"
3955c609719bSwdenk	Hit any key to exit ...
3956c609719bSwdenk
3957c609719bSwdenk	## Application terminated, rc = 0x0
3958c609719bSwdenk
3959c609719bSwdenkAnother example, which demonstrates how to register a CPM interrupt
3960c609719bSwdenkhandler with the U-Boot code, can be found in 'examples/timer.c'.
3961c609719bSwdenkHere, a CPM timer is set up to generate an interrupt every second.
3962c609719bSwdenkThe interrupt service routine is trivial, just printing a '.'
3963c609719bSwdenkcharacter, but this is just a demo program. The application can be
3964c609719bSwdenkcontrolled by the following keys:
3965c609719bSwdenk
3966c609719bSwdenk	? - print current values og the CPM Timer registers
3967c609719bSwdenk	b - enable interrupts and start timer
3968c609719bSwdenk	e - stop timer and disable interrupts
3969c609719bSwdenk	q - quit application
3970c609719bSwdenk
3971c609719bSwdenk	=> loads
3972c609719bSwdenk	## Ready for S-Record download ...
3973c609719bSwdenk	~>examples/timer.srec
3974c609719bSwdenk	1 2 3 4 5 6 7 8 9 10 11 ...
3975c609719bSwdenk	[file transfer complete]
3976c609719bSwdenk	[connected]
3977c609719bSwdenk	## Start Addr = 0x00040004
3978c609719bSwdenk
3979c609719bSwdenk	=> go 40004
3980c609719bSwdenk	## Starting application at 0x00040004 ...
3981c609719bSwdenk	TIMERS=0xfff00980
3982c609719bSwdenk	Using timer 1
3983c609719bSwdenk	  tgcr @ 0xfff00980, tmr @ 0xfff00990, trr @ 0xfff00994, tcr @ 0xfff00998, tcn @ 0xfff0099c, ter @ 0xfff009b0
3984c609719bSwdenk
3985c609719bSwdenkHit 'b':
3986c609719bSwdenk	[q, b, e, ?] Set interval 1000000 us
3987c609719bSwdenk	Enabling timer
3988c609719bSwdenkHit '?':
3989c609719bSwdenk	[q, b, e, ?] ........
3990c609719bSwdenk	tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0xef6, ter=0x0
3991c609719bSwdenkHit '?':
3992c609719bSwdenk	[q, b, e, ?] .
3993c609719bSwdenk	tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x2ad4, ter=0x0
3994c609719bSwdenkHit '?':
3995c609719bSwdenk	[q, b, e, ?] .
3996c609719bSwdenk	tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x1efc, ter=0x0
3997c609719bSwdenkHit '?':
3998c609719bSwdenk	[q, b, e, ?] .
3999c609719bSwdenk	tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x169d, ter=0x0
4000c609719bSwdenkHit 'e':
4001c609719bSwdenk	[q, b, e, ?] ...Stopping timer
4002c609719bSwdenkHit 'q':
4003c609719bSwdenk	[q, b, e, ?] ## Application terminated, rc = 0x0
4004c609719bSwdenk
4005c609719bSwdenk
400685ec0bccSwdenkMinicom warning:
400785ec0bccSwdenk================
400885ec0bccSwdenk
40097152b1d0SwdenkOver time, many people have reported problems when trying to use the
401085ec0bccSwdenk"minicom" terminal emulation program for serial download. I (wd)
401185ec0bccSwdenkconsider minicom to be broken, and recommend not to use it. Under
4012f07771ccSwdenkUnix, I recommend to use C-Kermit for general purpose use (and
401385ec0bccSwdenkespecially for kermit binary protocol download ("loadb" command), and
401485ec0bccSwdenkuse "cu" for S-Record download ("loads" command).
401585ec0bccSwdenk
401652f52c14SwdenkNevertheless, if you absolutely want to use it try adding this
401752f52c14Swdenkconfiguration to your "File transfer protocols" section:
401852f52c14Swdenk
401952f52c14Swdenk	   Name	   Program			Name U/D FullScr IO-Red. Multi
402052f52c14Swdenk	X  kermit  /usr/bin/kermit -i -l %l -s	 Y    U	   Y	   N	  N
402152f52c14Swdenk	Y  kermit  /usr/bin/kermit -i -l %l -r	 N    D	   Y	   N	  N
402252f52c14Swdenk
402352f52c14Swdenk
4024c609719bSwdenkNetBSD Notes:
4025c609719bSwdenk=============
4026c609719bSwdenk
4027c609719bSwdenkStarting at version 0.9.2, U-Boot supports NetBSD both as host
4028c609719bSwdenk(build U-Boot) and target system (boots NetBSD/mpc8xx).
4029c609719bSwdenk
4030c609719bSwdenkBuilding requires a cross environment; it is known to work on
4031c609719bSwdenkNetBSD/i386 with the cross-powerpc-netbsd-1.3 package (you will also
4032c609719bSwdenkneed gmake since the Makefiles are not compatible with BSD make).
4033c609719bSwdenkNote that the cross-powerpc package does not install include files;
4034c609719bSwdenkattempting to build U-Boot will fail because <machine/ansi.h> is
4035c609719bSwdenkmissing.  This file has to be installed and patched manually:
4036c609719bSwdenk
4037c609719bSwdenk	# cd /usr/pkg/cross/powerpc-netbsd/include
4038c609719bSwdenk	# mkdir powerpc
4039c609719bSwdenk	# ln -s powerpc machine
4040c609719bSwdenk	# cp /usr/src/sys/arch/powerpc/include/ansi.h powerpc/ansi.h
4041c609719bSwdenk	# ${EDIT} powerpc/ansi.h	## must remove __va_list, _BSD_VA_LIST
4042c609719bSwdenk
4043c609719bSwdenkNative builds *don't* work due to incompatibilities between native
4044c609719bSwdenkand U-Boot include files.
4045c609719bSwdenk
4046c609719bSwdenkBooting assumes that (the first part of) the image booted is a
4047c609719bSwdenkstage-2 loader which in turn loads and then invokes the kernel
4048c609719bSwdenkproper. Loader sources will eventually appear in the NetBSD source
4049c609719bSwdenktree (probably in sys/arc/mpc8xx/stand/u-boot_stage2/); in the
40502a8af187Swdenkmeantime, see ftp://ftp.denx.de/pub/u-boot/ppcboot_stage2.tar.gz
4051c609719bSwdenk
4052c609719bSwdenk
4053c609719bSwdenkImplementation Internals:
4054c609719bSwdenk=========================
4055c609719bSwdenk
4056c609719bSwdenkThe following is not intended to be a complete description of every
4057c609719bSwdenkimplementation detail. However, it should help to understand the
4058c609719bSwdenkinner workings of U-Boot and make it easier to port it to custom
4059c609719bSwdenkhardware.
4060c609719bSwdenk
4061c609719bSwdenk
4062c609719bSwdenkInitial Stack, Global Data:
4063c609719bSwdenk---------------------------
4064c609719bSwdenk
4065c609719bSwdenkThe implementation of U-Boot is complicated by the fact that U-Boot
4066c609719bSwdenkstarts running out of ROM (flash memory), usually without access to
4067c609719bSwdenksystem RAM (because the memory controller is not initialized yet).
4068c609719bSwdenkThis means that we don't have writable Data or BSS segments, and BSS
4069c609719bSwdenkis not initialized as zero. To be able to get a C environment working
4070c609719bSwdenkat all, we have to allocate at least a minimal stack. Implementation
4071c609719bSwdenkoptions for this are defined and restricted by the CPU used: Some CPU
4072c609719bSwdenkmodels provide on-chip memory (like the IMMR area on MPC8xx and
4073c609719bSwdenkMPC826x processors), on others (parts of) the data cache can be
4074c609719bSwdenklocked as (mis-) used as memory, etc.
4075c609719bSwdenk
40767152b1d0Swdenk	Chris Hallinan posted a good summary of these issues to the
40770668236bSWolfgang Denk	U-Boot mailing list:
407843d9616cSwdenk
407943d9616cSwdenk	Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)?
408043d9616cSwdenk	From: "Chris Hallinan" <clh@net1plus.com>
408143d9616cSwdenk	Date: Mon, 10 Feb 2003 16:43:46 -0500 (22:43 MET)
408243d9616cSwdenk	...
408343d9616cSwdenk
408443d9616cSwdenk	Correct me if I'm wrong, folks, but the way I understand it
408543d9616cSwdenk	is this: Using DCACHE as initial RAM for Stack, etc, does not
408643d9616cSwdenk	require any physical RAM backing up the cache. The cleverness
408743d9616cSwdenk	is that the cache is being used as a temporary supply of
408843d9616cSwdenk	necessary storage before the SDRAM controller is setup. It's
408911ccc33fSMarcel Ziswiler	beyond the scope of this list to explain the details, but you
409043d9616cSwdenk	can see how this works by studying the cache architecture and
409143d9616cSwdenk	operation in the architecture and processor-specific manuals.
409243d9616cSwdenk
409343d9616cSwdenk	OCM is On Chip Memory, which I believe the 405GP has 4K. It
409443d9616cSwdenk	is another option for the system designer to use as an
409511ccc33fSMarcel Ziswiler	initial stack/RAM area prior to SDRAM being available. Either
409643d9616cSwdenk	option should work for you. Using CS 4 should be fine if your
409743d9616cSwdenk	board designers haven't used it for something that would
409843d9616cSwdenk	cause you grief during the initial boot! It is frequently not
409943d9616cSwdenk	used.
410043d9616cSwdenk
41016d0f6bcfSJean-Christophe PLAGNIOL-VILLARD	CONFIG_SYS_INIT_RAM_ADDR should be somewhere that won't interfere
410243d9616cSwdenk	with your processor/board/system design. The default value
410343d9616cSwdenk	you will find in any recent u-boot distribution in
41048a316c9bSStefan Roese	walnut.h should work for you. I'd set it to a value larger
410543d9616cSwdenk	than your SDRAM module. If you have a 64MB SDRAM module, set
410643d9616cSwdenk	it above 400_0000. Just make sure your board has no resources
410743d9616cSwdenk	that are supposed to respond to that address! That code in
410843d9616cSwdenk	start.S has been around a while and should work as is when
410943d9616cSwdenk	you get the config right.
411043d9616cSwdenk
411143d9616cSwdenk	-Chris Hallinan
411243d9616cSwdenk	DS4.COM, Inc.
411343d9616cSwdenk
4114c609719bSwdenkIt is essential to remember this, since it has some impact on the C
4115c609719bSwdenkcode for the initialization procedures:
4116c609719bSwdenk
4117c609719bSwdenk* Initialized global data (data segment) is read-only. Do not attempt
4118c609719bSwdenk  to write it.
4119c609719bSwdenk
412011ccc33fSMarcel Ziswiler* Do not use any uninitialized global data (or implicitely initialized
4121c609719bSwdenk  as zero data - BSS segment) at all - this is undefined, initiali-
41227152b1d0Swdenk  zation is performed later (when relocating to RAM).
4123c609719bSwdenk
4124c609719bSwdenk* Stack space is very limited. Avoid big data buffers or things like
4125c609719bSwdenk  that.
4126c609719bSwdenk
4127c609719bSwdenkHaving only the stack as writable memory limits means we cannot use
4128c609719bSwdenknormal global data to share information beween the code. But it
4129c609719bSwdenkturned out that the implementation of U-Boot can be greatly
4130c609719bSwdenksimplified by making a global data structure (gd_t) available to all
4131c609719bSwdenkfunctions. We could pass a pointer to this data as argument to _all_
4132c609719bSwdenkfunctions, but this would bloat the code. Instead we use a feature of
4133c609719bSwdenkthe GCC compiler (Global Register Variables) to share the data: we
4134c609719bSwdenkplace a pointer (gd) to the global data into a register which we
4135c609719bSwdenkreserve for this purpose.
4136c609719bSwdenk
41377152b1d0SwdenkWhen choosing a register for such a purpose we are restricted by the
4138c609719bSwdenkrelevant  (E)ABI  specifications for the current architecture, and by
4139c609719bSwdenkGCC's implementation.
4140c609719bSwdenk
4141c609719bSwdenkFor PowerPC, the following registers have specific use:
4142c609719bSwdenk	R1:	stack pointer
4143e7670f6cSWolfgang Denk	R2:	reserved for system use
4144c609719bSwdenk	R3-R4:	parameter passing and return values
4145c609719bSwdenk	R5-R10: parameter passing
4146c609719bSwdenk	R13:	small data area pointer
4147c609719bSwdenk	R30:	GOT pointer
4148c609719bSwdenk	R31:	frame pointer
4149c609719bSwdenk
4150e6bee808SJoakim Tjernlund	(U-Boot also uses R12 as internal GOT pointer. r12
4151e6bee808SJoakim Tjernlund	is a volatile register so r12 needs to be reset when
4152e6bee808SJoakim Tjernlund	going back and forth between asm and C)
4153c609719bSwdenk
4154e7670f6cSWolfgang Denk    ==> U-Boot will use R2 to hold a pointer to the global data
4155c609719bSwdenk
4156c609719bSwdenk    Note: on PPC, we could use a static initializer (since the
4157c609719bSwdenk    address of the global data structure is known at compile time),
4158c609719bSwdenk    but it turned out that reserving a register results in somewhat
4159c609719bSwdenk    smaller code - although the code savings are not that big (on
4160c609719bSwdenk    average for all boards 752 bytes for the whole U-Boot image,
4161c609719bSwdenk    624 text + 127 data).
4162c609719bSwdenk
4163c4db335cSRobin GetzOn Blackfin, the normal C ABI (except for P3) is followed as documented here:
41644c58eb55SMike Frysinger	http://docs.blackfin.uclinux.org/doku.php?id=application_binary_interface
41654c58eb55SMike Frysinger
4166c4db335cSRobin Getz    ==> U-Boot will use P3 to hold a pointer to the global data
41674c58eb55SMike Frysinger
4168c609719bSwdenkOn ARM, the following registers are used:
4169c609719bSwdenk
4170c609719bSwdenk	R0:	function argument word/integer result
4171c609719bSwdenk	R1-R3:	function argument word
4172c609719bSwdenk	R9:	GOT pointer
4173c609719bSwdenk	R10:	stack limit (used only if stack checking if enabled)
4174c609719bSwdenk	R11:	argument (frame) pointer
4175c609719bSwdenk	R12:	temporary workspace
4176c609719bSwdenk	R13:	stack pointer
4177c609719bSwdenk	R14:	link register
4178c609719bSwdenk	R15:	program counter
4179c609719bSwdenk
4180c609719bSwdenk    ==> U-Boot will use R8 to hold a pointer to the global data
4181c609719bSwdenk
41820df01fd3SThomas ChouOn Nios II, the ABI is documented here:
41830df01fd3SThomas Chou	http://www.altera.com/literature/hb/nios2/n2cpu_nii51016.pdf
41840df01fd3SThomas Chou
41850df01fd3SThomas Chou    ==> U-Boot will use gp to hold a pointer to the global data
41860df01fd3SThomas Chou
41870df01fd3SThomas Chou    Note: on Nios II, we give "-G0" option to gcc and don't use gp
41880df01fd3SThomas Chou    to access small data sections, so gp is free.
41890df01fd3SThomas Chou
4190d87080b7SWolfgang DenkNOTE: DECLARE_GLOBAL_DATA_PTR must be used with file-global scope,
4191d87080b7SWolfgang Denkor current versions of GCC may "optimize" the code too much.
4192c609719bSwdenk
4193c609719bSwdenkMemory Management:
4194c609719bSwdenk------------------
4195c609719bSwdenk
4196c609719bSwdenkU-Boot runs in system state and uses physical addresses, i.e. the
4197c609719bSwdenkMMU is not used either for address mapping nor for memory protection.
4198c609719bSwdenk
4199c609719bSwdenkThe available memory is mapped to fixed addresses using the memory
4200c609719bSwdenkcontroller. In this process, a contiguous block is formed for each
4201c609719bSwdenkmemory type (Flash, SDRAM, SRAM), even when it consists of several
4202c609719bSwdenkphysical memory banks.
4203c609719bSwdenk
4204c609719bSwdenkU-Boot is installed in the first 128 kB of the first Flash bank (on
4205c609719bSwdenkTQM8xxL modules this is the range 0x40000000 ... 0x4001FFFF). After
4206c609719bSwdenkbooting and sizing and initializing DRAM, the code relocates itself
4207c609719bSwdenkto the upper end of DRAM. Immediately below the U-Boot code some
42086d0f6bcfSJean-Christophe PLAGNIOL-VILLARDmemory is reserved for use by malloc() [see CONFIG_SYS_MALLOC_LEN
4209c609719bSwdenkconfiguration setting]. Below that, a structure with global Board
4210c609719bSwdenkInfo data is placed, followed by the stack (growing downward).
4211c609719bSwdenk
4212c609719bSwdenkAdditionally, some exception handler code is copied to the low 8 kB
4213c609719bSwdenkof DRAM (0x00000000 ... 0x00001FFF).
4214c609719bSwdenk
4215c609719bSwdenkSo a typical memory configuration with 16 MB of DRAM could look like
4216c609719bSwdenkthis:
4217c609719bSwdenk
4218c609719bSwdenk	0x0000 0000	Exception Vector code
4219c609719bSwdenk	      :
4220c609719bSwdenk	0x0000 1FFF
4221c609719bSwdenk	0x0000 2000	Free for Application Use
4222c609719bSwdenk	      :
4223c609719bSwdenk	      :
4224c609719bSwdenk
4225c609719bSwdenk	      :
4226c609719bSwdenk	      :
4227c609719bSwdenk	0x00FB FF20	Monitor Stack (Growing downward)
4228c609719bSwdenk	0x00FB FFAC	Board Info Data and permanent copy of global data
4229c609719bSwdenk	0x00FC 0000	Malloc Arena
4230c609719bSwdenk	      :
4231c609719bSwdenk	0x00FD FFFF
4232c609719bSwdenk	0x00FE 0000	RAM Copy of Monitor Code
4233c609719bSwdenk	...		eventually: LCD or video framebuffer
4234c609719bSwdenk	...		eventually: pRAM (Protected RAM - unchanged by reset)
4235c609719bSwdenk	0x00FF FFFF	[End of RAM]
4236c609719bSwdenk
4237c609719bSwdenk
4238c609719bSwdenkSystem Initialization:
4239c609719bSwdenk----------------------
4240c609719bSwdenk
4241c609719bSwdenkIn the reset configuration, U-Boot starts at the reset entry point
424211ccc33fSMarcel Ziswiler(on most PowerPC systems at address 0x00000100). Because of the reset
4243c609719bSwdenkconfiguration for CS0# this is a mirror of the onboard Flash memory.
42447152b1d0SwdenkTo be able to re-map memory U-Boot then jumps to its link address.
4245c609719bSwdenkTo be able to implement the initialization code in C, a (small!)
4246c609719bSwdenkinitial stack is set up in the internal Dual Ported RAM (in case CPUs
4247c609719bSwdenkwhich provide such a feature like MPC8xx or MPC8260), or in a locked
4248c609719bSwdenkpart of the data cache. After that, U-Boot initializes the CPU core,
4249c609719bSwdenkthe caches and the SIU.
4250c609719bSwdenk
4251c609719bSwdenkNext, all (potentially) available memory banks are mapped using a
4252c609719bSwdenkpreliminary mapping. For example, we put them on 512 MB boundaries
4253c609719bSwdenk(multiples of 0x20000000: SDRAM on 0x00000000 and 0x20000000, Flash
4254c609719bSwdenkon 0x40000000 and 0x60000000, SRAM on 0x80000000). Then UPM A is
4255c609719bSwdenkprogrammed for SDRAM access. Using the temporary configuration, a
4256c609719bSwdenksimple memory test is run that determines the size of the SDRAM
4257c609719bSwdenkbanks.
4258c609719bSwdenk
4259c609719bSwdenkWhen there is more than one SDRAM bank, and the banks are of
42607152b1d0Swdenkdifferent size, the largest is mapped first. For equal size, the first
4261c609719bSwdenkbank (CS2#) is mapped first. The first mapping is always for address
4262c609719bSwdenk0x00000000, with any additional banks following immediately to create
4263c609719bSwdenkcontiguous memory starting from 0.
4264c609719bSwdenk
4265c609719bSwdenkThen, the monitor installs itself at the upper end of the SDRAM area
4266c609719bSwdenkand allocates memory for use by malloc() and for the global Board
4267c609719bSwdenkInfo data; also, the exception vector code is copied to the low RAM
4268c609719bSwdenkpages, and the final stack is set up.
4269c609719bSwdenk
4270c609719bSwdenkOnly after this relocation will you have a "normal" C environment;
4271c609719bSwdenkuntil that you are restricted in several ways, mostly because you are
4272c609719bSwdenkrunning from ROM, and because the code will have to be relocated to a
4273c609719bSwdenknew address in RAM.
4274c609719bSwdenk
4275c609719bSwdenk
4276c609719bSwdenkU-Boot Porting Guide:
4277c609719bSwdenk----------------------
4278c609719bSwdenk
4279c609719bSwdenk[Based on messages by Jerry Van Baren in the U-Boot-Users mailing
42806aff3115Swdenklist, October 2002]
4281c609719bSwdenk
4282c609719bSwdenk
4283c609719bSwdenkint main(int argc, char *argv[])
4284c609719bSwdenk{
4285c609719bSwdenk	sighandler_t no_more_time;
4286c609719bSwdenk
4287c609719bSwdenk	signal(SIGALRM, no_more_time);
4288c609719bSwdenk	alarm(PROJECT_DEADLINE - toSec (3 * WEEK));
4289c609719bSwdenk
4290c609719bSwdenk	if (available_money > available_manpower) {
42916c3fef28SJerry Van Baren		Pay consultant to port U-Boot;
4292c609719bSwdenk		return 0;
4293c609719bSwdenk	}
4294c609719bSwdenk
4295c609719bSwdenk	Download latest U-Boot source;
4296c609719bSwdenk
42970668236bSWolfgang Denk	Subscribe to u-boot mailing list;
42986aff3115Swdenk
42996c3fef28SJerry Van Baren	if (clueless)
4300c609719bSwdenk		email("Hi, I am new to U-Boot, how do I get started?");
4301c609719bSwdenk
4302c609719bSwdenk	while (learning) {
4303c609719bSwdenk		Read the README file in the top level directory;
43047cb22f97Swdenk		Read http://www.denx.de/twiki/bin/view/DULG/Manual;
43056c3fef28SJerry Van Baren		Read applicable doc/*.README;
4306c609719bSwdenk		Read the source, Luke;
43076c3fef28SJerry Van Baren		/* find . -name "*.[chS]" | xargs grep -i <keyword> */
4308c609719bSwdenk	}
4309c609719bSwdenk
43106c3fef28SJerry Van Baren	if (available_money > toLocalCurrency ($2500))
43116c3fef28SJerry Van Baren		Buy a BDI3000;
43126c3fef28SJerry Van Baren	else
4313c609719bSwdenk		Add a lot of aggravation and time;
4314c609719bSwdenk
43156c3fef28SJerry Van Baren	if (a similar board exists) {	/* hopefully... */
43166c3fef28SJerry Van Baren		cp -a board/<similar> board/<myboard>
43176c3fef28SJerry Van Baren		cp include/configs/<similar>.h include/configs/<myboard>.h
43186c3fef28SJerry Van Baren	} else {
4319c609719bSwdenk		Create your own board support subdirectory;
43206c3fef28SJerry Van Baren		Create your own board include/configs/<myboard>.h file;
43216c3fef28SJerry Van Baren	}
43226c3fef28SJerry Van Baren	Edit new board/<myboard> files
43236c3fef28SJerry Van Baren	Edit new include/configs/<myboard>.h
4324c609719bSwdenk
43256c3fef28SJerry Van Baren	while (!accepted) {
4326c609719bSwdenk		while (!running) {
4327c609719bSwdenk			do {
4328c609719bSwdenk				Add / modify source code;
4329c609719bSwdenk			} until (compiles);
4330c609719bSwdenk			Debug;
4331c609719bSwdenk			if (clueless)
4332c609719bSwdenk				email("Hi, I am having problems...");
4333c609719bSwdenk		}
43346c3fef28SJerry Van Baren		Send patch file to the U-Boot email list;
43356c3fef28SJerry Van Baren		if (reasonable critiques)
43366c3fef28SJerry Van Baren			Incorporate improvements from email list code review;
43376c3fef28SJerry Van Baren		else
43386c3fef28SJerry Van Baren			Defend code as written;
43396c3fef28SJerry Van Baren	}
4340c609719bSwdenk
4341c609719bSwdenk	return 0;
4342c609719bSwdenk}
4343c609719bSwdenk
4344c609719bSwdenkvoid no_more_time (int sig)
4345c609719bSwdenk{
4346c609719bSwdenk      hire_a_guru();
4347c609719bSwdenk}
4348c609719bSwdenk
4349c609719bSwdenk
4350c609719bSwdenkCoding Standards:
4351c609719bSwdenk-----------------
4352c609719bSwdenk
4353c609719bSwdenkAll contributions to U-Boot should conform to the Linux kernel
43542c051651SDetlev Zundelcoding style; see the file "Documentation/CodingStyle" and the script
43552c051651SDetlev Zundel"scripts/Lindent" in your Linux kernel source directory.  In sources
43562c051651SDetlev Zundeloriginating from U-Boot a style corresponding to "Lindent -pcs" (adding
43572c051651SDetlev Zundelspaces before parameters to function calls) is actually used.
4358c609719bSwdenk
43592c051651SDetlev ZundelSource files originating from a different project (for example the
43602c051651SDetlev ZundelMTD subsystem) are generally exempt from these guidelines and are not
43612c051651SDetlev Zundelreformated to ease subsequent migration to newer versions of those
43622c051651SDetlev Zundelsources.
43632c051651SDetlev Zundel
43642c051651SDetlev ZundelPlease note that U-Boot is implemented in C (and to some small parts in
43652c051651SDetlev ZundelAssembler); no C++ is used, so please do not use C++ style comments (//)
43662c051651SDetlev Zundelin your code.
4367c609719bSwdenk
4368c178d3daSwdenkPlease also stick to the following formatting rules:
4369180d3f74Swdenk- remove any trailing white space
4370180d3f74Swdenk- use TAB characters for indentation, not spaces
4371180d3f74Swdenk- make sure NOT to use DOS '\r\n' line feeds
4372180d3f74Swdenk- do not add more than 2 empty lines to source files
4373180d3f74Swdenk- do not add trailing empty lines to source files
4374180d3f74Swdenk
4375c609719bSwdenkSubmissions which do not conform to the standards may be returned
4376c609719bSwdenkwith a request to reformat the changes.
4377c609719bSwdenk
4378c609719bSwdenk
4379c609719bSwdenkSubmitting Patches:
4380c609719bSwdenk-------------------
4381c609719bSwdenk
4382c609719bSwdenkSince the number of patches for U-Boot is growing, we need to
4383c609719bSwdenkestablish some rules. Submissions which do not conform to these rules
4384c609719bSwdenkmay be rejected, even when they contain important and valuable stuff.
4385c609719bSwdenk
43860d28f34bSMagnus LiljaPlease see http://www.denx.de/wiki/U-Boot/Patches for details.
4387218ca724SWolfgang Denk
43880668236bSWolfgang DenkPatches shall be sent to the u-boot mailing list <u-boot@lists.denx.de>;
43890668236bSWolfgang Denksee http://lists.denx.de/mailman/listinfo/u-boot
43900668236bSWolfgang Denk
4391c609719bSwdenkWhen you send a patch, please include the following information with
4392c609719bSwdenkit:
4393c609719bSwdenk
4394c609719bSwdenk* For bug fixes: a description of the bug and how your patch fixes
4395c609719bSwdenk  this bug. Please try to include a way of demonstrating that the
4396c609719bSwdenk  patch actually fixes something.
4397c609719bSwdenk
4398c609719bSwdenk* For new features: a description of the feature and your
4399c609719bSwdenk  implementation.
4400c609719bSwdenk
4401c609719bSwdenk* A CHANGELOG entry as plaintext (separate from the patch)
4402c609719bSwdenk
4403c609719bSwdenk* For major contributions, your entry to the CREDITS file
4404c609719bSwdenk
4405c609719bSwdenk* When you add support for a new board, don't forget to add this
4406c609719bSwdenk  board to the MAKEALL script, too.
4407c609719bSwdenk
4408c609719bSwdenk* If your patch adds new configuration options, don't forget to
4409c609719bSwdenk  document these in the README file.
4410c609719bSwdenk
4411218ca724SWolfgang Denk* The patch itself. If you are using git (which is *strongly*
4412218ca724SWolfgang Denk  recommended) you can easily generate the patch using the
4413218ca724SWolfgang Denk  "git-format-patch". If you then use "git-send-email" to send it to
4414218ca724SWolfgang Denk  the U-Boot mailing list, you will avoid most of the common problems
4415218ca724SWolfgang Denk  with some other mail clients.
4416c609719bSwdenk
4417218ca724SWolfgang Denk  If you cannot use git, use "diff -purN OLD NEW". If your version of
4418218ca724SWolfgang Denk  diff does not support these options, then get the latest version of
4419218ca724SWolfgang Denk  GNU diff.
44206dff5529Swdenk
4421218ca724SWolfgang Denk  The current directory when running this command shall be the parent
4422218ca724SWolfgang Denk  directory of the U-Boot source tree (i. e. please make sure that
4423218ca724SWolfgang Denk  your patch includes sufficient directory information for the
4424218ca724SWolfgang Denk  affected files).
4425218ca724SWolfgang Denk
4426218ca724SWolfgang Denk  We prefer patches as plain text. MIME attachments are discouraged,
4427218ca724SWolfgang Denk  and compressed attachments must not be used.
4428c609719bSwdenk
442952f52c14Swdenk* If one logical set of modifications affects or creates several
443052f52c14Swdenk  files, all these changes shall be submitted in a SINGLE patch file.
443152f52c14Swdenk
443252f52c14Swdenk* Changesets that contain different, unrelated modifications shall be
443352f52c14Swdenk  submitted as SEPARATE patches, one patch per changeset.
443452f52c14Swdenk
443552f52c14Swdenk
4436c609719bSwdenkNotes:
4437c609719bSwdenk
4438c609719bSwdenk* Before sending the patch, run the MAKEALL script on your patched
4439c609719bSwdenk  source tree and make sure that no errors or warnings are reported
4440c609719bSwdenk  for any of the boards.
4441c609719bSwdenk
4442c609719bSwdenk* Keep your modifications to the necessary minimum: A patch
4443c609719bSwdenk  containing several unrelated changes or arbitrary reformats will be
4444c609719bSwdenk  returned with a request to re-formatting / split it.
4445c609719bSwdenk
4446c609719bSwdenk* If you modify existing code, make sure that your new code does not
4447c609719bSwdenk  add to the memory footprint of the code ;-) Small is beautiful!
4448c609719bSwdenk  When adding new features, these should compile conditionally only
4449c609719bSwdenk  (using #ifdef), and the resulting code with the new feature
4450c609719bSwdenk  disabled must not need more memory than the old code without your
4451c609719bSwdenk  modification.
445290dc6704Swdenk
44530668236bSWolfgang Denk* Remember that there is a size limit of 100 kB per message on the
44540668236bSWolfgang Denk  u-boot mailing list. Bigger patches will be moderated. If they are
44550668236bSWolfgang Denk  reasonable and not too big, they will be acknowledged. But patches
44560668236bSWolfgang Denk  bigger than the size limit should be avoided.
4457