1c609719bSwdenk# 2218ca724SWolfgang Denk# (C) Copyright 2000 - 2008 3c609719bSwdenk# Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4c609719bSwdenk# 5c609719bSwdenk# See file CREDITS for list of people who contributed to this 6c609719bSwdenk# project. 7c609719bSwdenk# 8c609719bSwdenk# This program is free software; you can redistribute it and/or 9c609719bSwdenk# modify it under the terms of the GNU General Public License as 10c609719bSwdenk# published by the Free Software Foundation; either version 2 of 11c609719bSwdenk# the License, or (at your option) any later version. 12c609719bSwdenk# 13c609719bSwdenk# This program is distributed in the hope that it will be useful, 14c609719bSwdenk# but WITHOUT ANY WARRANTY; without even the implied warranty of 15c609719bSwdenk# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16c609719bSwdenk# GNU General Public License for more details. 17c609719bSwdenk# 18c609719bSwdenk# You should have received a copy of the GNU General Public License 19c609719bSwdenk# along with this program; if not, write to the Free Software 20c609719bSwdenk# Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21c609719bSwdenk# MA 02111-1307 USA 22c609719bSwdenk# 23c609719bSwdenk 24c609719bSwdenkSummary: 25c609719bSwdenk======== 26c609719bSwdenk 2724ee89b9SwdenkThis directory contains the source code for U-Boot, a boot loader for 28e86e5a07SwdenkEmbedded boards based on PowerPC, ARM, MIPS and several other 29e86e5a07Swdenkprocessors, which can be installed in a boot ROM and used to 30e86e5a07Swdenkinitialize and test the hardware or to download and run application 31e86e5a07Swdenkcode. 32c609719bSwdenk 33c609719bSwdenkThe development of U-Boot is closely related to Linux: some parts of 3424ee89b9Swdenkthe source code originate in the Linux source tree, we have some 3524ee89b9Swdenkheader files in common, and special provision has been made to 36c609719bSwdenksupport booting of Linux images. 37c609719bSwdenk 38c609719bSwdenkSome attention has been paid to make this software easily 39c609719bSwdenkconfigurable and extendable. For instance, all monitor commands are 40c609719bSwdenkimplemented with the same call interface, so that it's very easy to 41c609719bSwdenkadd new commands. Also, instead of permanently adding rarely used 42c609719bSwdenkcode (for instance hardware test utilities) to the monitor, you can 43c609719bSwdenkload and run it dynamically. 44c609719bSwdenk 45c609719bSwdenk 46c609719bSwdenkStatus: 47c609719bSwdenk======= 48c609719bSwdenk 49c609719bSwdenkIn general, all boards for which a configuration option exists in the 50c609719bSwdenkMakefile have been tested to some extent and can be considered 51c609719bSwdenk"working". In fact, many of them are used in production systems. 52c609719bSwdenk 53c609719bSwdenkIn case of problems see the CHANGELOG and CREDITS files to find out 54218ca724SWolfgang Denkwho contributed the specific port. The MAINTAINERS file lists board 55218ca724SWolfgang Denkmaintainers. 56c609719bSwdenk 57c609719bSwdenk 58c609719bSwdenkWhere to get help: 59c609719bSwdenk================== 60c609719bSwdenk 61c609719bSwdenkIn case you have questions about, problems with or contributions for 62c609719bSwdenkU-Boot you should send a message to the U-Boot mailing list at 63c609719bSwdenk<u-boot-users@lists.sourceforge.net>. There is also an archive of 64c609719bSwdenkprevious traffic on the mailing list - please search the archive 65c609719bSwdenkbefore asking FAQ's. Please see 66c609719bSwdenkhttp://lists.sourceforge.net/lists/listinfo/u-boot-users/ 67c609719bSwdenk 68c609719bSwdenk 69218ca724SWolfgang DenkWhere to get source code: 70218ca724SWolfgang Denk========================= 71218ca724SWolfgang Denk 72218ca724SWolfgang DenkThe U-Boot source code is maintained in the git repository at 73218ca724SWolfgang Denkgit://www.denx.de/git/u-boot.git ; you can browse it online at 74218ca724SWolfgang Denkhttp://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=summary 75218ca724SWolfgang Denk 76218ca724SWolfgang DenkThe "snapshot" links on this page allow you to download tarballs of 7711ccc33fSMarcel Ziswilerany version you might be interested in. Official releases are also 78218ca724SWolfgang Denkavailable for FTP download from the ftp://ftp.denx.de/pub/u-boot/ 79218ca724SWolfgang Denkdirectory. 80218ca724SWolfgang Denk 81d4ee711dSAnatolij GustschinPre-built (and tested) images are available from 82218ca724SWolfgang Denkftp://ftp.denx.de/pub/u-boot/images/ 83218ca724SWolfgang Denk 84218ca724SWolfgang Denk 85c609719bSwdenkWhere we come from: 86c609719bSwdenk=================== 87c609719bSwdenk 88c609719bSwdenk- start from 8xxrom sources 8924ee89b9Swdenk- create PPCBoot project (http://sourceforge.net/projects/ppcboot) 90c609719bSwdenk- clean up code 91c609719bSwdenk- make it easier to add custom boards 92c609719bSwdenk- make it possible to add other [PowerPC] CPUs 93c609719bSwdenk- extend functions, especially: 94c609719bSwdenk * Provide extended interface to Linux boot loader 95c609719bSwdenk * S-Record download 96c609719bSwdenk * network boot 9711ccc33fSMarcel Ziswiler * PCMCIA / CompactFlash / ATA disk / SCSI ... boot 9824ee89b9Swdenk- create ARMBoot project (http://sourceforge.net/projects/armboot) 99c609719bSwdenk- add other CPU families (starting with ARM) 10024ee89b9Swdenk- create U-Boot project (http://sourceforge.net/projects/u-boot) 1010d28f34bSMagnus Lilja- current project page: see http://www.denx.de/wiki/U-Boot 10224ee89b9Swdenk 10324ee89b9Swdenk 10424ee89b9SwdenkNames and Spelling: 10524ee89b9Swdenk=================== 10624ee89b9Swdenk 10724ee89b9SwdenkThe "official" name of this project is "Das U-Boot". The spelling 10824ee89b9Swdenk"U-Boot" shall be used in all written text (documentation, comments 10924ee89b9Swdenkin source files etc.). Example: 11024ee89b9Swdenk 11124ee89b9Swdenk This is the README file for the U-Boot project. 11224ee89b9Swdenk 11324ee89b9SwdenkFile names etc. shall be based on the string "u-boot". Examples: 11424ee89b9Swdenk 11524ee89b9Swdenk include/asm-ppc/u-boot.h 11624ee89b9Swdenk 11724ee89b9Swdenk #include <asm/u-boot.h> 11824ee89b9Swdenk 11924ee89b9SwdenkVariable names, preprocessor constants etc. shall be either based on 12024ee89b9Swdenkthe string "u_boot" or on "U_BOOT". Example: 12124ee89b9Swdenk 12224ee89b9Swdenk U_BOOT_VERSION u_boot_logo 12324ee89b9Swdenk IH_OS_U_BOOT u_boot_hush_start 124c609719bSwdenk 125c609719bSwdenk 12693f19cc0SwdenkVersioning: 12793f19cc0Swdenk=========== 12893f19cc0Swdenk 12993f19cc0SwdenkU-Boot uses a 3 level version number containing a version, a 13093f19cc0Swdenksub-version, and a patchlevel: "U-Boot-2.34.5" means version "2", 13193f19cc0Swdenksub-version "34", and patchlevel "4". 13293f19cc0Swdenk 13393f19cc0SwdenkThe patchlevel is used to indicate certain stages of development 13493f19cc0Swdenkbetween released versions, i. e. officially released versions of 13593f19cc0SwdenkU-Boot will always have a patchlevel of "0". 13693f19cc0Swdenk 13793f19cc0Swdenk 138c609719bSwdenkDirectory Hierarchy: 139c609719bSwdenk==================== 140c609719bSwdenk 1417152b1d0Swdenk- board Board dependent files 1427152b1d0Swdenk- common Misc architecture independent functions 143c609719bSwdenk- cpu CPU specific files 144983fda83Swdenk - 74xx_7xx Files specific to Freescale MPC74xx and 7xx CPUs 14511dadd54Swdenk - arm720t Files specific to ARM 720 CPUs 14611dadd54Swdenk - arm920t Files specific to ARM 920 CPUs 147a85f9f21Swdenk - at91rm9200 Files specific to Atmel AT91RM9200 CPU 148983fda83Swdenk - imx Files specific to Freescale MC9328 i.MX CPUs 1491d9f4105Swdenk - s3c24x0 Files specific to Samsung S3C24X0 CPUs 15011dadd54Swdenk - arm925t Files specific to ARM 925 CPUs 15111dadd54Swdenk - arm926ejs Files specific to ARM 926 CPUs 1528ed96046Swdenk - arm1136 Files specific to ARM 1136 CPUs 15372a087e0SWolfgang Denk - at32ap Files specific to Atmel AVR32 AP CPUs 15411dadd54Swdenk - i386 Files specific to i386 CPUs 15511dadd54Swdenk - ixp Files specific to Intel XScale IXP CPUs 156b330990cSDaniel Hellstrom - leon2 Files specific to Gaisler LEON2 SPARC CPU 1571e9a164eSDaniel Hellstrom - leon3 Files specific to Gaisler LEON3 SPARC CPU 158983fda83Swdenk - mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs 1591552af70STsiChungLiew - mcf5227x Files specific to Freescale ColdFire MCF5227x CPUs 1608e585f02STsiChung Liew - mcf532x Files specific to Freescale ColdFire MCF5329 CPUs 1618ae158cdSTsiChungLiew - mcf5445x Files specific to Freescale ColdFire MCF5445x CPUs 16257a12720STsiChungLiew - mcf547x_8x Files specific to Freescale ColdFire MCF547x_8x CPUs 16311dadd54Swdenk - mips Files specific to MIPS CPUs 164983fda83Swdenk - mpc5xx Files specific to Freescale MPC5xx CPUs 165983fda83Swdenk - mpc5xxx Files specific to Freescale MPC5xxx CPUs 166983fda83Swdenk - mpc8xx Files specific to Freescale MPC8xx CPUs 167983fda83Swdenk - mpc8220 Files specific to Freescale MPC8220 CPUs 168983fda83Swdenk - mpc824x Files specific to Freescale MPC824x CPUs 169983fda83Swdenk - mpc8260 Files specific to Freescale MPC8260 CPUs 170983fda83Swdenk - mpc85xx Files specific to Freescale MPC85xx CPUs 17111dadd54Swdenk - nios Files specific to Altera NIOS CPUs 1725c952cf0Swdenk - nios2 Files specific to Altera Nios-II CPUs 1730c8721a4SWolfgang Denk - ppc4xx Files specific to AMCC PowerPC 4xx CPUs 17411dadd54Swdenk - pxa Files specific to Intel XScale PXA CPUs 17511dadd54Swdenk - s3c44b0 Files specific to Samsung S3C44B0 CPUs 17611dadd54Swdenk - sa1100 Files specific to Intel StrongARM SA1100 CPUs 177c609719bSwdenk- disk Code for disk drive partition handling 178c609719bSwdenk- doc Documentation (don't expect too much) 1797152b1d0Swdenk- drivers Commonly used device drivers 180c609719bSwdenk- dtt Digital Thermometer and Thermostat drivers 181c609719bSwdenk- examples Example code for standalone applications, etc. 182c609719bSwdenk- include Header Files 18311dadd54Swdenk- lib_arm Files generic to ARM architecture 1847b64fef3SWolfgang Denk- lib_avr32 Files generic to AVR32 architecture 18511dadd54Swdenk- lib_generic Files generic to all architectures 18611dadd54Swdenk- lib_i386 Files generic to i386 architecture 18711dadd54Swdenk- lib_m68k Files generic to m68k architecture 18811dadd54Swdenk- lib_mips Files generic to MIPS architecture 18911dadd54Swdenk- lib_nios Files generic to NIOS architecture 19011dadd54Swdenk- lib_ppc Files generic to PowerPC architecture 191c2f02da2SDaniel Hellstrom- lib_sparc Files generic to SPARC architecture 192213bf8c8SGerald Van Baren- libfdt Library files to support flattened device trees 193c609719bSwdenk- net Networking code 194c609719bSwdenk- post Power On Self Test 195c609719bSwdenk- rtc Real Time Clock drivers 196c609719bSwdenk- tools Tools to build S-Record or U-Boot images, etc. 197c609719bSwdenk 198c609719bSwdenkSoftware Configuration: 199c609719bSwdenk======================= 200c609719bSwdenk 201c609719bSwdenkConfiguration is usually done using C preprocessor defines; the 202c609719bSwdenkrationale behind that is to avoid dead code whenever possible. 203c609719bSwdenk 204c609719bSwdenkThere are two classes of configuration variables: 205c609719bSwdenk 206c609719bSwdenk* Configuration _OPTIONS_: 207c609719bSwdenk These are selectable by the user and have names beginning with 208c609719bSwdenk "CONFIG_". 209c609719bSwdenk 210c609719bSwdenk* Configuration _SETTINGS_: 211c609719bSwdenk These depend on the hardware etc. and should not be meddled with if 212c609719bSwdenk you don't know what you're doing; they have names beginning with 213c609719bSwdenk "CFG_". 214c609719bSwdenk 215c609719bSwdenkLater we will add a configuration tool - probably similar to or even 216c609719bSwdenkidentical to what's used for the Linux kernel. Right now, we have to 217c609719bSwdenkdo the configuration by hand, which means creating some symbolic 218c609719bSwdenklinks and editing some configuration files. We use the TQM8xxL boards 219c609719bSwdenkas an example here. 220c609719bSwdenk 221c609719bSwdenk 222c609719bSwdenkSelection of Processor Architecture and Board Type: 223c609719bSwdenk--------------------------------------------------- 224c609719bSwdenk 225c609719bSwdenkFor all supported boards there are ready-to-use default 226c609719bSwdenkconfigurations available; just type "make <board_name>_config". 227c609719bSwdenk 228c609719bSwdenkExample: For a TQM823L module type: 229c609719bSwdenk 230c609719bSwdenk cd u-boot 231c609719bSwdenk make TQM823L_config 232c609719bSwdenk 23311ccc33fSMarcel ZiswilerFor the Cogent platform, you need to specify the CPU type as well; 234c609719bSwdenke.g. "make cogent_mpc8xx_config". And also configure the cogent 235c609719bSwdenkdirectory according to the instructions in cogent/README. 236c609719bSwdenk 237c609719bSwdenk 238c609719bSwdenkConfiguration Options: 239c609719bSwdenk---------------------- 240c609719bSwdenk 241c609719bSwdenkConfiguration depends on the combination of board and CPU type; all 242c609719bSwdenksuch information is kept in a configuration file 243c609719bSwdenk"include/configs/<board_name>.h". 244c609719bSwdenk 245c609719bSwdenkExample: For a TQM823L module, all configuration settings are in 246c609719bSwdenk"include/configs/TQM823L.h". 247c609719bSwdenk 248c609719bSwdenk 2497f6c2cbcSwdenkMany of the options are named exactly as the corresponding Linux 2507f6c2cbcSwdenkkernel configuration options. The intention is to make it easier to 2517f6c2cbcSwdenkbuild a config tool - later. 2527f6c2cbcSwdenk 2537f6c2cbcSwdenk 254c609719bSwdenkThe following options need to be configured: 255c609719bSwdenk 2562628114eSKim Phillips- CPU Type: Define exactly one, e.g. CONFIG_MPC85XX. 257c609719bSwdenk 2582628114eSKim Phillips- Board Type: Define exactly one, e.g. CONFIG_MPC8540ADS. 2596ccec449SWolfgang Denk 2606ccec449SWolfgang Denk- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined) 26109ea0de0SHaavard Skinnemoen Define exactly one, e.g. CONFIG_ATSTK1002 262c609719bSwdenk 263c609719bSwdenk- CPU Module Type: (if CONFIG_COGENT is defined) 264c609719bSwdenk Define exactly one of 265c609719bSwdenk CONFIG_CMA286_60_OLD 266c609719bSwdenk--- FIXME --- not tested yet: 267c609719bSwdenk CONFIG_CMA286_60, CONFIG_CMA286_21, CONFIG_CMA286_60P, 268c609719bSwdenk CONFIG_CMA287_23, CONFIG_CMA287_50 269c609719bSwdenk 270c609719bSwdenk- Motherboard Type: (if CONFIG_COGENT is defined) 271c609719bSwdenk Define exactly one of 272c609719bSwdenk CONFIG_CMA101, CONFIG_CMA102 273c609719bSwdenk 274c609719bSwdenk- Motherboard I/O Modules: (if CONFIG_COGENT is defined) 275c609719bSwdenk Define one or more of 276c609719bSwdenk CONFIG_CMA302 277c609719bSwdenk 278c609719bSwdenk- Motherboard Options: (if CONFIG_CMA101 or CONFIG_CMA102 are defined) 279c609719bSwdenk Define one or more of 280c609719bSwdenk CONFIG_LCD_HEARTBEAT - update a character position on 28111ccc33fSMarcel Ziswiler the LCD display every second with 282c609719bSwdenk a "rotator" |\-/|\-/ 283c609719bSwdenk 2842535d602Swdenk- Board flavour: (if CONFIG_MPC8260ADS is defined) 2852535d602Swdenk CONFIG_ADSTYPE 2862535d602Swdenk Possible values are: 2872535d602Swdenk CFG_8260ADS - original MPC8260ADS 288180d3f74Swdenk CFG_8266ADS - MPC8266ADS 28954387ac9Swdenk CFG_PQ2FADS - PQ2FADS-ZU or PQ2FADS-VR 29004a85b3bSwdenk CFG_8272ADS - MPC8272ADS 2912535d602Swdenk 292c609719bSwdenk- MPC824X Family Member (if CONFIG_MPC824X is defined) 293c609719bSwdenk Define exactly one of 294c609719bSwdenk CONFIG_MPC8240, CONFIG_MPC8245 295c609719bSwdenk 29611ccc33fSMarcel Ziswiler- 8xx CPU Options: (if using an MPC8xx CPU) 29766ca92a5Swdenk CONFIG_8xx_GCLK_FREQ - deprecated: CPU clock if 29866ca92a5Swdenk get_gclk_freq() cannot work 2995da627a4Swdenk e.g. if there is no 32KHz 3005da627a4Swdenk reference PIT/RTC clock 30166ca92a5Swdenk CONFIG_8xx_OSCLK - PLL input clock (either EXTCLK 30266ca92a5Swdenk or XTAL/EXTAL) 303c609719bSwdenk 30466ca92a5Swdenk- 859/866/885 CPU options: (if using a MPC859 or MPC866 or MPC885 CPU): 30566ca92a5Swdenk CFG_8xx_CPUCLK_MIN 30666ca92a5Swdenk CFG_8xx_CPUCLK_MAX 30766ca92a5Swdenk CONFIG_8xx_CPUCLK_DEFAULT 30875d1ea7fSwdenk See doc/README.MPC866 30975d1ea7fSwdenk 31075d1ea7fSwdenk CFG_MEASURE_CPUCLK 31175d1ea7fSwdenk 31275d1ea7fSwdenk Define this to measure the actual CPU clock instead 31375d1ea7fSwdenk of relying on the correctness of the configured 31475d1ea7fSwdenk values. Mostly useful for board bringup to make sure 31575d1ea7fSwdenk the PLL is locked at the intended frequency. Note 31675d1ea7fSwdenk that this requires a (stable) reference clock (32 kHz 31766ca92a5Swdenk RTC clock or CFG_8XX_XIN) 31875d1ea7fSwdenk 3190b953ffcSMarkus Klotzbuecher- Intel Monahans options: 3200b953ffcSMarkus Klotzbuecher CFG_MONAHANS_RUN_MODE_OSC_RATIO 3210b953ffcSMarkus Klotzbuecher 3220b953ffcSMarkus Klotzbuecher Defines the Monahans run mode to oscillator 3230b953ffcSMarkus Klotzbuecher ratio. Valid values are 8, 16, 24, 31. The core 3240b953ffcSMarkus Klotzbuecher frequency is this value multiplied by 13 MHz. 3250b953ffcSMarkus Klotzbuecher 3260b953ffcSMarkus Klotzbuecher CFG_MONAHANS_TURBO_RUN_MODE_RATIO 3270b953ffcSMarkus Klotzbuecher 3280b953ffcSMarkus Klotzbuecher Defines the Monahans turbo mode to oscillator 3290b953ffcSMarkus Klotzbuecher ratio. Valid values are 1 (default if undefined) and 3300b953ffcSMarkus Klotzbuecher 2. The core frequency as calculated above is multiplied 3310b953ffcSMarkus Klotzbuecher by this value. 3320b953ffcSMarkus Klotzbuecher 3335da627a4Swdenk- Linux Kernel Interface: 334c609719bSwdenk CONFIG_CLOCKS_IN_MHZ 335c609719bSwdenk 336c609719bSwdenk U-Boot stores all clock information in Hz 337c609719bSwdenk internally. For binary compatibility with older Linux 338c609719bSwdenk kernels (which expect the clocks passed in the 339c609719bSwdenk bd_info data to be in MHz) the environment variable 340c609719bSwdenk "clocks_in_mhz" can be defined so that U-Boot 341c609719bSwdenk converts clock data to MHZ before passing it to the 342c609719bSwdenk Linux kernel. 343c609719bSwdenk When CONFIG_CLOCKS_IN_MHZ is defined, a definition of 344c609719bSwdenk "clocks_in_mhz=1" is automatically included in the 345c609719bSwdenk default environment. 346c609719bSwdenk 3475da627a4Swdenk CONFIG_MEMSIZE_IN_BYTES [relevant for MIPS only] 3485da627a4Swdenk 34911ccc33fSMarcel Ziswiler When transferring memsize parameter to linux, some versions 3505da627a4Swdenk expect it to be in bytes, others in MB. 3515da627a4Swdenk Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes. 3525da627a4Swdenk 353fec6d9eeSGerald Van Baren CONFIG_OF_LIBFDT 354f57f70aaSWolfgang Denk 355f57f70aaSWolfgang Denk New kernel versions are expecting firmware settings to be 356213bf8c8SGerald Van Baren passed using flattened device trees (based on open firmware 357213bf8c8SGerald Van Baren concepts). 358213bf8c8SGerald Van Baren 359213bf8c8SGerald Van Baren CONFIG_OF_LIBFDT 360213bf8c8SGerald Van Baren * New libfdt-based support 361213bf8c8SGerald Van Baren * Adds the "fdt" command 3623bb342fcSKim Phillips * The bootm command automatically updates the fdt 363213bf8c8SGerald Van Baren 364f57f70aaSWolfgang Denk OF_CPU - The proper name of the cpus node. 365c2871f03SKumar Gala OF_SOC - The proper name of the soc node. 366f57f70aaSWolfgang Denk OF_TBCLK - The timebase frequency. 367c2871f03SKumar Gala OF_STDOUT_PATH - The path to the console device 368f57f70aaSWolfgang Denk 36911ccc33fSMarcel Ziswiler boards with QUICC Engines require OF_QE to set UCC MAC 37011ccc33fSMarcel Ziswiler addresses 3713bb342fcSKim Phillips 3724e253137SKumar Gala CONFIG_OF_BOARD_SETUP 3734e253137SKumar Gala 3744e253137SKumar Gala Board code has addition modification that it wants to make 3754e253137SKumar Gala to the flat device tree before handing it off to the kernel 3766705d81eSwdenk 3770267768eSMatthew McClintock CONFIG_OF_BOOT_CPU 3780267768eSMatthew McClintock 37911ccc33fSMarcel Ziswiler This define fills in the correct boot CPU in the boot 3800267768eSMatthew McClintock param header, the default value is zero if undefined. 3810267768eSMatthew McClintock 3826705d81eSwdenk- Serial Ports: 3836705d81eSwdenk CFG_PL010_SERIAL 3846705d81eSwdenk 3856705d81eSwdenk Define this if you want support for Amba PrimeCell PL010 UARTs. 3866705d81eSwdenk 3876705d81eSwdenk CFG_PL011_SERIAL 3886705d81eSwdenk 3896705d81eSwdenk Define this if you want support for Amba PrimeCell PL011 UARTs. 3906705d81eSwdenk 3916705d81eSwdenk CONFIG_PL011_CLOCK 3926705d81eSwdenk 3936705d81eSwdenk If you have Amba PrimeCell PL011 UARTs, set this variable to 3946705d81eSwdenk the clock speed of the UARTs. 3956705d81eSwdenk 3966705d81eSwdenk CONFIG_PL01x_PORTS 3976705d81eSwdenk 3986705d81eSwdenk If you have Amba PrimeCell PL010 or PL011 UARTs on your board, 3996705d81eSwdenk define this to a list of base addresses for each (supported) 4006705d81eSwdenk port. See e.g. include/configs/versatile.h 4016705d81eSwdenk 4026705d81eSwdenk 403c609719bSwdenk- Console Interface: 404c609719bSwdenk Depending on board, define exactly one serial port 405c609719bSwdenk (like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2, 406c609719bSwdenk CONFIG_8xx_CONS_SCC1, ...), or switch off the serial 407c609719bSwdenk console by defining CONFIG_8xx_CONS_NONE 408c609719bSwdenk 409c609719bSwdenk Note: if CONFIG_8xx_CONS_NONE is defined, the serial 410c609719bSwdenk port routines must be defined elsewhere 411c609719bSwdenk (i.e. serial_init(), serial_getc(), ...) 412c609719bSwdenk 413c609719bSwdenk CONFIG_CFB_CONSOLE 414c609719bSwdenk Enables console device for a color framebuffer. Needs following 415c609719bSwdenk defines (cf. smiLynxEM, i8042, board/eltec/bab7xx) 416c609719bSwdenk VIDEO_FB_LITTLE_ENDIAN graphic memory organisation 417c609719bSwdenk (default big endian) 418c609719bSwdenk VIDEO_HW_RECTFILL graphic chip supports 419c609719bSwdenk rectangle fill 420c609719bSwdenk (cf. smiLynxEM) 421c609719bSwdenk VIDEO_HW_BITBLT graphic chip supports 422c609719bSwdenk bit-blit (cf. smiLynxEM) 423c609719bSwdenk VIDEO_VISIBLE_COLS visible pixel columns 424c609719bSwdenk (cols=pitch) 425c609719bSwdenk VIDEO_VISIBLE_ROWS visible pixel rows 426c609719bSwdenk VIDEO_PIXEL_SIZE bytes per pixel 427c609719bSwdenk VIDEO_DATA_FORMAT graphic data format 428c609719bSwdenk (0-5, cf. cfb_console.c) 429c609719bSwdenk VIDEO_FB_ADRS framebuffer address 430c609719bSwdenk VIDEO_KBD_INIT_FCT keyboard int fct 431c609719bSwdenk (i.e. i8042_kbd_init()) 432c609719bSwdenk VIDEO_TSTC_FCT test char fct 433c609719bSwdenk (i.e. i8042_tstc) 434c609719bSwdenk VIDEO_GETC_FCT get char fct 435c609719bSwdenk (i.e. i8042_getc) 436c609719bSwdenk CONFIG_CONSOLE_CURSOR cursor drawing on/off 437c609719bSwdenk (requires blink timer 438c609719bSwdenk cf. i8042.c) 439c609719bSwdenk CFG_CONSOLE_BLINK_COUNT blink interval (cf. i8042.c) 440c609719bSwdenk CONFIG_CONSOLE_TIME display time/date info in 441c609719bSwdenk upper right corner 442602ad3b3SJon Loeliger (requires CONFIG_CMD_DATE) 443c609719bSwdenk CONFIG_VIDEO_LOGO display Linux logo in 444c609719bSwdenk upper left corner 445a6c7ad2fSwdenk CONFIG_VIDEO_BMP_LOGO use bmp_logo.h instead of 446a6c7ad2fSwdenk linux_logo.h for logo. 447a6c7ad2fSwdenk Requires CONFIG_VIDEO_LOGO 448c609719bSwdenk CONFIG_CONSOLE_EXTRA_INFO 44911ccc33fSMarcel Ziswiler additional board info beside 450c609719bSwdenk the logo 451c609719bSwdenk 452c609719bSwdenk When CONFIG_CFB_CONSOLE is defined, video console is 453c609719bSwdenk default i/o. Serial console can be forced with 454c609719bSwdenk environment 'console=serial'. 455c609719bSwdenk 456a3ad8e26Swdenk When CONFIG_SILENT_CONSOLE is defined, all console 457a3ad8e26Swdenk messages (by U-Boot and Linux!) can be silenced with 458a3ad8e26Swdenk the "silent" environment variable. See 459a3ad8e26Swdenk doc/README.silent for more information. 460a3ad8e26Swdenk 461c609719bSwdenk- Console Baudrate: 462c609719bSwdenk CONFIG_BAUDRATE - in bps 463c609719bSwdenk Select one of the baudrates listed in 464c609719bSwdenk CFG_BAUDRATE_TABLE, see below. 4653bbc899fSwdenk CFG_BRGCLK_PRESCALE, baudrate prescale 466c609719bSwdenk 467c609719bSwdenk- Interrupt driven serial port input: 468c609719bSwdenk CONFIG_SERIAL_SOFTWARE_FIFO 469c609719bSwdenk 470c609719bSwdenk PPC405GP only. 471c609719bSwdenk Use an interrupt handler for receiving data on the 472c609719bSwdenk serial port. It also enables using hardware handshake 473c609719bSwdenk (RTS/CTS) and UART's built-in FIFO. Set the number of 474c609719bSwdenk bytes the interrupt driven input buffer should have. 475c609719bSwdenk 476109c0e3aSwdenk Leave undefined to disable this feature, including 477109c0e3aSwdenk disable the buffer and hardware handshake. 478c609719bSwdenk 4791d49b1f3Sstroese- Console UART Number: 4801d49b1f3Sstroese CONFIG_UART1_CONSOLE 4811d49b1f3Sstroese 4820c8721a4SWolfgang Denk AMCC PPC4xx only. 4831d49b1f3Sstroese If defined internal UART1 (and not UART0) is used 4841d49b1f3Sstroese as default U-Boot console. 4851d49b1f3Sstroese 486c609719bSwdenk- Boot Delay: CONFIG_BOOTDELAY - in seconds 487c609719bSwdenk Delay before automatically booting the default image; 488c609719bSwdenk set to -1 to disable autoboot. 489c609719bSwdenk 490c609719bSwdenk See doc/README.autoboot for these options that 491c609719bSwdenk work with CONFIG_BOOTDELAY. None are required. 492c609719bSwdenk CONFIG_BOOT_RETRY_TIME 493c609719bSwdenk CONFIG_BOOT_RETRY_MIN 494c609719bSwdenk CONFIG_AUTOBOOT_KEYED 495c609719bSwdenk CONFIG_AUTOBOOT_PROMPT 496c609719bSwdenk CONFIG_AUTOBOOT_DELAY_STR 497c609719bSwdenk CONFIG_AUTOBOOT_STOP_STR 498c609719bSwdenk CONFIG_AUTOBOOT_DELAY_STR2 499c609719bSwdenk CONFIG_AUTOBOOT_STOP_STR2 500c609719bSwdenk CONFIG_ZERO_BOOTDELAY_CHECK 501c609719bSwdenk CONFIG_RESET_TO_RETRY 502c609719bSwdenk 503c609719bSwdenk- Autoboot Command: 504c609719bSwdenk CONFIG_BOOTCOMMAND 505c609719bSwdenk Only needed when CONFIG_BOOTDELAY is enabled; 506c609719bSwdenk define a command string that is automatically executed 507c609719bSwdenk when no character is read on the console interface 508c609719bSwdenk within "Boot Delay" after reset. 509c609719bSwdenk 510c609719bSwdenk CONFIG_BOOTARGS 511c609719bSwdenk This can be used to pass arguments to the bootm 512c609719bSwdenk command. The value of CONFIG_BOOTARGS goes into the 513c609719bSwdenk environment value "bootargs". 514c609719bSwdenk 515c609719bSwdenk CONFIG_RAMBOOT and CONFIG_NFSBOOT 516c609719bSwdenk The value of these goes into the environment as 517c609719bSwdenk "ramboot" and "nfsboot" respectively, and can be used 518c609719bSwdenk as a convenience, when switching between booting from 51911ccc33fSMarcel Ziswiler RAM and NFS. 520c609719bSwdenk 521c609719bSwdenk- Pre-Boot Commands: 522c609719bSwdenk CONFIG_PREBOOT 523c609719bSwdenk 524c609719bSwdenk When this option is #defined, the existence of the 525c609719bSwdenk environment variable "preboot" will be checked 526c609719bSwdenk immediately before starting the CONFIG_BOOTDELAY 527c609719bSwdenk countdown and/or running the auto-boot command resp. 528c609719bSwdenk entering interactive mode. 529c609719bSwdenk 530c609719bSwdenk This feature is especially useful when "preboot" is 531c609719bSwdenk automatically generated or modified. For an example 532c609719bSwdenk see the LWMON board specific code: here "preboot" is 533c609719bSwdenk modified when the user holds down a certain 534c609719bSwdenk combination of keys on the (special) keyboard when 535c609719bSwdenk booting the systems 536c609719bSwdenk 537c609719bSwdenk- Serial Download Echo Mode: 538c609719bSwdenk CONFIG_LOADS_ECHO 539c609719bSwdenk If defined to 1, all characters received during a 540c609719bSwdenk serial download (using the "loads" command) are 541c609719bSwdenk echoed back. This might be needed by some terminal 542c609719bSwdenk emulations (like "cu"), but may as well just take 543c609719bSwdenk time on others. This setting #define's the initial 544c609719bSwdenk value of the "loads_echo" environment variable. 545c609719bSwdenk 546602ad3b3SJon Loeliger- Kgdb Serial Baudrate: (if CONFIG_CMD_KGDB is defined) 547c609719bSwdenk CONFIG_KGDB_BAUDRATE 548c609719bSwdenk Select one of the baudrates listed in 549c609719bSwdenk CFG_BAUDRATE_TABLE, see below. 550c609719bSwdenk 551c609719bSwdenk- Monitor Functions: 552602ad3b3SJon Loeliger Monitor commands can be included or excluded 553602ad3b3SJon Loeliger from the build by using the #include files 554602ad3b3SJon Loeliger "config_cmd_all.h" and #undef'ing unwanted 555602ad3b3SJon Loeliger commands, or using "config_cmd_default.h" 556602ad3b3SJon Loeliger and augmenting with additional #define's 557602ad3b3SJon Loeliger for wanted commands. 558c609719bSwdenk 559602ad3b3SJon Loeliger The default command configuration includes all commands 560602ad3b3SJon Loeliger except those marked below with a "*". 561602ad3b3SJon Loeliger 562602ad3b3SJon Loeliger CONFIG_CMD_ASKENV * ask for env variable 563602ad3b3SJon Loeliger CONFIG_CMD_AUTOSCRIPT Autoscript Support 564602ad3b3SJon Loeliger CONFIG_CMD_BDI bdinfo 565602ad3b3SJon Loeliger CONFIG_CMD_BEDBUG * Include BedBug Debugger 566602ad3b3SJon Loeliger CONFIG_CMD_BMP * BMP support 567602ad3b3SJon Loeliger CONFIG_CMD_BSP * Board specific commands 568602ad3b3SJon Loeliger CONFIG_CMD_BOOTD bootd 569602ad3b3SJon Loeliger CONFIG_CMD_CACHE * icache, dcache 570602ad3b3SJon Loeliger CONFIG_CMD_CONSOLE coninfo 571602ad3b3SJon Loeliger CONFIG_CMD_DATE * support for RTC, date/time... 572602ad3b3SJon Loeliger CONFIG_CMD_DHCP * DHCP support 573602ad3b3SJon Loeliger CONFIG_CMD_DIAG * Diagnostics 574602ad3b3SJon Loeliger CONFIG_CMD_DOC * Disk-On-Chip Support 575602ad3b3SJon Loeliger CONFIG_CMD_DTT * Digital Therm and Thermostat 576602ad3b3SJon Loeliger CONFIG_CMD_ECHO echo arguments 577602ad3b3SJon Loeliger CONFIG_CMD_EEPROM * EEPROM read/write support 578602ad3b3SJon Loeliger CONFIG_CMD_ELF * bootelf, bootvx 579602ad3b3SJon Loeliger CONFIG_CMD_ENV saveenv 580602ad3b3SJon Loeliger CONFIG_CMD_FDC * Floppy Disk Support 581602ad3b3SJon Loeliger CONFIG_CMD_FAT * FAT partition support 582602ad3b3SJon Loeliger CONFIG_CMD_FDOS * Dos diskette Support 583602ad3b3SJon Loeliger CONFIG_CMD_FLASH flinfo, erase, protect 584602ad3b3SJon Loeliger CONFIG_CMD_FPGA FPGA device initialization support 585602ad3b3SJon Loeliger CONFIG_CMD_HWFLOW * RTS/CTS hw flow control 586602ad3b3SJon Loeliger CONFIG_CMD_I2C * I2C serial bus support 587602ad3b3SJon Loeliger CONFIG_CMD_IDE * IDE harddisk support 588602ad3b3SJon Loeliger CONFIG_CMD_IMI iminfo 589602ad3b3SJon Loeliger CONFIG_CMD_IMLS List all found images 590602ad3b3SJon Loeliger CONFIG_CMD_IMMAP * IMMR dump support 591602ad3b3SJon Loeliger CONFIG_CMD_IRQ * irqinfo 592602ad3b3SJon Loeliger CONFIG_CMD_ITEST Integer/string test of 2 values 593602ad3b3SJon Loeliger CONFIG_CMD_JFFS2 * JFFS2 Support 594602ad3b3SJon Loeliger CONFIG_CMD_KGDB * kgdb 595602ad3b3SJon Loeliger CONFIG_CMD_LOADB loadb 596602ad3b3SJon Loeliger CONFIG_CMD_LOADS loads 597602ad3b3SJon Loeliger CONFIG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, 59856523f12Swdenk loop, loopw, mtest 599602ad3b3SJon Loeliger CONFIG_CMD_MISC Misc functions like sleep etc 600602ad3b3SJon Loeliger CONFIG_CMD_MMC * MMC memory mapped support 601602ad3b3SJon Loeliger CONFIG_CMD_MII * MII utility commands 602602ad3b3SJon Loeliger CONFIG_CMD_NAND * NAND support 603602ad3b3SJon Loeliger CONFIG_CMD_NET bootp, tftpboot, rarpboot 604602ad3b3SJon Loeliger CONFIG_CMD_PCI * pciinfo 605602ad3b3SJon Loeliger CONFIG_CMD_PCMCIA * PCMCIA support 606602ad3b3SJon Loeliger CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network 607602ad3b3SJon Loeliger host 608602ad3b3SJon Loeliger CONFIG_CMD_PORTIO * Port I/O 609602ad3b3SJon Loeliger CONFIG_CMD_REGINFO * Register dump 610602ad3b3SJon Loeliger CONFIG_CMD_RUN run command in env variable 611602ad3b3SJon Loeliger CONFIG_CMD_SAVES * save S record dump 612602ad3b3SJon Loeliger CONFIG_CMD_SCSI * SCSI Support 613602ad3b3SJon Loeliger CONFIG_CMD_SDRAM * print SDRAM configuration information 614602ad3b3SJon Loeliger (requires CONFIG_CMD_I2C) 615602ad3b3SJon Loeliger CONFIG_CMD_SETGETDCR Support for DCR Register access 616602ad3b3SJon Loeliger (4xx only) 617602ad3b3SJon Loeliger CONFIG_CMD_SPI * SPI serial bus support 618602ad3b3SJon Loeliger CONFIG_CMD_USB * USB support 619602ad3b3SJon Loeliger CONFIG_CMD_VFD * VFD support (TRAB) 620602ad3b3SJon Loeliger CONFIG_CMD_CDP * Cisco Discover Protocol support 621602ad3b3SJon Loeliger CONFIG_CMD_FSL * Microblaze FSL support 622c609719bSwdenk 623c609719bSwdenk 624c609719bSwdenk EXAMPLE: If you want all functions except of network 625c609719bSwdenk support you can write: 626c609719bSwdenk 627602ad3b3SJon Loeliger #include "config_cmd_all.h" 628602ad3b3SJon Loeliger #undef CONFIG_CMD_NET 629c609719bSwdenk 630213bf8c8SGerald Van Baren Other Commands: 631213bf8c8SGerald Van Baren fdt (flattened device tree) command: CONFIG_OF_LIBFDT 632c609719bSwdenk 633c609719bSwdenk Note: Don't enable the "icache" and "dcache" commands 634602ad3b3SJon Loeliger (configuration option CONFIG_CMD_CACHE) unless you know 635c609719bSwdenk what you (and your U-Boot users) are doing. Data 636c609719bSwdenk cache cannot be enabled on systems like the 8xx or 637c609719bSwdenk 8260 (where accesses to the IMMR region must be 638c609719bSwdenk uncached), and it cannot be disabled on all other 639c609719bSwdenk systems where we (mis-) use the data cache to hold an 640c609719bSwdenk initial stack and some data. 641c609719bSwdenk 642c609719bSwdenk 643c609719bSwdenk XXX - this list needs to get updated! 644c609719bSwdenk 645c609719bSwdenk- Watchdog: 646c609719bSwdenk CONFIG_WATCHDOG 647c609719bSwdenk If this variable is defined, it enables watchdog 6487152b1d0Swdenk support. There must be support in the platform specific 649c609719bSwdenk code for a watchdog. For the 8xx and 8260 CPUs, the 650c609719bSwdenk SIU Watchdog feature is enabled in the SYPCR 651c609719bSwdenk register. 652c609719bSwdenk 653c1551ea8Sstroese- U-Boot Version: 654c1551ea8Sstroese CONFIG_VERSION_VARIABLE 655c1551ea8Sstroese If this variable is defined, an environment variable 656c1551ea8Sstroese named "ver" is created by U-Boot showing the U-Boot 657c1551ea8Sstroese version as printed by the "version" command. 658c1551ea8Sstroese This variable is readonly. 659c1551ea8Sstroese 660c609719bSwdenk- Real-Time Clock: 661c609719bSwdenk 662602ad3b3SJon Loeliger When CONFIG_CMD_DATE is selected, the type of the RTC 663c609719bSwdenk has to be selected, too. Define exactly one of the 664c609719bSwdenk following options: 665c609719bSwdenk 666c609719bSwdenk CONFIG_RTC_MPC8xx - use internal RTC of MPC8xx 667c609719bSwdenk CONFIG_RTC_PCF8563 - use Philips PCF8563 RTC 6687ce63709SGuennadi Liakhovetski CONFIG_RTC_MC13783 - use MC13783 RTC 669c609719bSwdenk CONFIG_RTC_MC146818 - use MC146818 RTC 6701cb8e980Swdenk CONFIG_RTC_DS1307 - use Maxim, Inc. DS1307 RTC 671c609719bSwdenk CONFIG_RTC_DS1337 - use Maxim, Inc. DS1337 RTC 6727f70e853Swdenk CONFIG_RTC_DS1338 - use Maxim, Inc. DS1338 RTC 6733bac3513Swdenk CONFIG_RTC_DS164x - use Dallas DS164x RTC 6749536dfccSTor Krill CONFIG_RTC_ISL1208 - use Intersil ISL1208 RTC 6754c0d4c3bSwdenk CONFIG_RTC_MAX6900 - use Maxim, Inc. MAX6900 RTC 676da8808dfSJoakim Tjernlund CFG_RTC_DS1337_NOOSC - Turn off the OSC output for DS1337 677c609719bSwdenk 678b37c7e5eSwdenk Note that if the RTC uses I2C, then the I2C interface 679b37c7e5eSwdenk must also be configured. See I2C Support, below. 680b37c7e5eSwdenk 681c609719bSwdenk- Timestamp Support: 682c609719bSwdenk 683c609719bSwdenk When CONFIG_TIMESTAMP is selected, the timestamp 684c609719bSwdenk (date and time) of an image is printed by image 685c609719bSwdenk commands like bootm or iminfo. This option is 686602ad3b3SJon Loeliger automatically enabled when you select CONFIG_CMD_DATE . 687c609719bSwdenk 688c609719bSwdenk- Partition Support: 689c609719bSwdenk CONFIG_MAC_PARTITION and/or CONFIG_DOS_PARTITION 690c609719bSwdenk and/or CONFIG_ISO_PARTITION 691c609719bSwdenk 692602ad3b3SJon Loeliger If IDE or SCSI support is enabled (CONFIG_CMD_IDE or 693218ca724SWolfgang Denk CONFIG_CMD_SCSI) you must configure support for at 694218ca724SWolfgang Denk least one partition type as well. 695c609719bSwdenk 696c609719bSwdenk- IDE Reset method: 6974d13cbadSwdenk CONFIG_IDE_RESET_ROUTINE - this is defined in several 6984d13cbadSwdenk board configurations files but used nowhere! 699c609719bSwdenk 7004d13cbadSwdenk CONFIG_IDE_RESET - is this is defined, IDE Reset will 7014d13cbadSwdenk be performed by calling the function 7024d13cbadSwdenk ide_set_reset(int reset) 7034d13cbadSwdenk which has to be defined in a board specific file 704c609719bSwdenk 705c609719bSwdenk- ATAPI Support: 706c609719bSwdenk CONFIG_ATAPI 707c609719bSwdenk 708c609719bSwdenk Set this to enable ATAPI support. 709c609719bSwdenk 710c40b2956Swdenk- LBA48 Support 711c40b2956Swdenk CONFIG_LBA48 712c40b2956Swdenk 713c40b2956Swdenk Set this to enable support for disks larger than 137GB 714c40b2956Swdenk Also look at CFG_64BIT_LBA ,CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL 715c40b2956Swdenk Whithout these , LBA48 support uses 32bit variables and will 'only' 716c40b2956Swdenk support disks up to 2.1TB. 717c40b2956Swdenk 718c40b2956Swdenk CFG_64BIT_LBA: 719c40b2956Swdenk When enabled, makes the IDE subsystem use 64bit sector addresses. 720c40b2956Swdenk Default is 32bit. 721c40b2956Swdenk 722c609719bSwdenk- SCSI Support: 723c609719bSwdenk At the moment only there is only support for the 724c609719bSwdenk SYM53C8XX SCSI controller; define 725c609719bSwdenk CONFIG_SCSI_SYM53C8XX to enable it. 726c609719bSwdenk 727c609719bSwdenk CFG_SCSI_MAX_LUN [8], CFG_SCSI_MAX_SCSI_ID [7] and 728c609719bSwdenk CFG_SCSI_MAX_DEVICE [CFG_SCSI_MAX_SCSI_ID * 729c609719bSwdenk CFG_SCSI_MAX_LUN] can be adjusted to define the 730c609719bSwdenk maximum numbers of LUNs, SCSI ID's and target 731c609719bSwdenk devices. 732c609719bSwdenk CFG_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz) 733c609719bSwdenk 734c609719bSwdenk- NETWORK Support (PCI): 735682011ffSwdenk CONFIG_E1000 736682011ffSwdenk Support for Intel 8254x gigabit chips. 737682011ffSwdenk 738ac3315c2SAndre Schwarz CONFIG_E1000_FALLBACK_MAC 73911ccc33fSMarcel Ziswiler default MAC for empty EEPROM after production. 740ac3315c2SAndre Schwarz 741c609719bSwdenk CONFIG_EEPRO100 742c609719bSwdenk Support for Intel 82557/82559/82559ER chips. 74311ccc33fSMarcel Ziswiler Optional CONFIG_EEPRO100_SROM_WRITE enables EEPROM 744c609719bSwdenk write routine for first time initialisation. 745c609719bSwdenk 746c609719bSwdenk CONFIG_TULIP 747c609719bSwdenk Support for Digital 2114x chips. 748c609719bSwdenk Optional CONFIG_TULIP_SELECT_MEDIA for board specific 749c609719bSwdenk modem chip initialisation (KS8761/QS6611). 750c609719bSwdenk 751c609719bSwdenk CONFIG_NATSEMI 752c609719bSwdenk Support for National dp83815 chips. 753c609719bSwdenk 754c609719bSwdenk CONFIG_NS8382X 755c609719bSwdenk Support for National dp8382[01] gigabit chips. 756c609719bSwdenk 75745219c46Swdenk- NETWORK Support (other): 75845219c46Swdenk 75945219c46Swdenk CONFIG_DRIVER_LAN91C96 76045219c46Swdenk Support for SMSC's LAN91C96 chips. 76145219c46Swdenk 76245219c46Swdenk CONFIG_LAN91C96_BASE 76345219c46Swdenk Define this to hold the physical address 76445219c46Swdenk of the LAN91C96's I/O space 76545219c46Swdenk 76645219c46Swdenk CONFIG_LAN91C96_USE_32_BIT 76745219c46Swdenk Define this to enable 32 bit addressing 76845219c46Swdenk 769f39748aeSwdenk CONFIG_DRIVER_SMC91111 770f39748aeSwdenk Support for SMSC's LAN91C111 chip 771f39748aeSwdenk 772f39748aeSwdenk CONFIG_SMC91111_BASE 773f39748aeSwdenk Define this to hold the physical address 774f39748aeSwdenk of the device (I/O space) 775f39748aeSwdenk 776f39748aeSwdenk CONFIG_SMC_USE_32_BIT 777f39748aeSwdenk Define this if data bus is 32 bits 778f39748aeSwdenk 779f39748aeSwdenk CONFIG_SMC_USE_IOFUNCS 780f39748aeSwdenk Define this to use i/o functions instead of macros 781f39748aeSwdenk (some hardware wont work with macros) 782f39748aeSwdenk 783557b377dSJens Gehrlein CONFIG_DRIVER_SMC911X 784557b377dSJens Gehrlein Support for SMSC's LAN911x and LAN921x chips 785557b377dSJens Gehrlein 786557b377dSJens Gehrlein CONFIG_DRIVER_SMC911X_BASE 787557b377dSJens Gehrlein Define this to hold the physical address 788557b377dSJens Gehrlein of the device (I/O space) 789557b377dSJens Gehrlein 790557b377dSJens Gehrlein CONFIG_DRIVER_SMC911X_32_BIT 791557b377dSJens Gehrlein Define this if data bus is 32 bits 792557b377dSJens Gehrlein 793557b377dSJens Gehrlein CONFIG_DRIVER_SMC911X_16_BIT 794557b377dSJens Gehrlein Define this if data bus is 16 bits. If your processor 795557b377dSJens Gehrlein automatically converts one 32 bit word to two 16 bit 796557b377dSJens Gehrlein words you may also try CONFIG_DRIVER_SMC911X_32_BIT. 797557b377dSJens Gehrlein 798c609719bSwdenk- USB Support: 799c609719bSwdenk At the moment only the UHCI host controller is 8004d13cbadSwdenk supported (PIP405, MIP405, MPC5200); define 801c609719bSwdenk CONFIG_USB_UHCI to enable it. 802c609719bSwdenk define CONFIG_USB_KEYBOARD to enable the USB Keyboard 80330d56faeSwdenk and define CONFIG_USB_STORAGE to enable the USB 804c609719bSwdenk storage devices. 805c609719bSwdenk Note: 806c609719bSwdenk Supported are USB Keyboards and USB Floppy drives 807c609719bSwdenk (TEAC FD-05PUB). 8084d13cbadSwdenk MPC5200 USB requires additional defines: 8094d13cbadSwdenk CONFIG_USB_CLOCK 8104d13cbadSwdenk for 528 MHz Clock: 0x0001bbbb 8114d13cbadSwdenk CONFIG_USB_CONFIG 8124d13cbadSwdenk for differential drivers: 0x00001000 8134d13cbadSwdenk for single ended drivers: 0x00005000 814fdcfaa1bSZhang Wei CFG_USB_EVENT_POLL 815fdcfaa1bSZhang Wei May be defined to allow interrupt polling 816fdcfaa1bSZhang Wei instead of using asynchronous interrupts 8174d13cbadSwdenk 81816c8d5e7SWolfgang Denk- USB Device: 81916c8d5e7SWolfgang Denk Define the below if you wish to use the USB console. 82016c8d5e7SWolfgang Denk Once firmware is rebuilt from a serial console issue the 82116c8d5e7SWolfgang Denk command "setenv stdin usbtty; setenv stdout usbtty" and 82211ccc33fSMarcel Ziswiler attach your USB cable. The Unix command "dmesg" should print 82316c8d5e7SWolfgang Denk it has found a new device. The environment variable usbtty 82416c8d5e7SWolfgang Denk can be set to gserial or cdc_acm to enable your device to 82516c8d5e7SWolfgang Denk appear to a USB host as a Linux gserial device or a 82616c8d5e7SWolfgang Denk Common Device Class Abstract Control Model serial device. 82716c8d5e7SWolfgang Denk If you select usbtty = gserial you should be able to enumerate 82816c8d5e7SWolfgang Denk a Linux host by 82916c8d5e7SWolfgang Denk # modprobe usbserial vendor=0xVendorID product=0xProductID 83016c8d5e7SWolfgang Denk else if using cdc_acm, simply setting the environment 83116c8d5e7SWolfgang Denk variable usbtty to be cdc_acm should suffice. The following 83216c8d5e7SWolfgang Denk might be defined in YourBoardName.h 83316c8d5e7SWolfgang Denk 83416c8d5e7SWolfgang Denk CONFIG_USB_DEVICE 83516c8d5e7SWolfgang Denk Define this to build a UDC device 83616c8d5e7SWolfgang Denk 83716c8d5e7SWolfgang Denk CONFIG_USB_TTY 83816c8d5e7SWolfgang Denk Define this to have a tty type of device available to 83916c8d5e7SWolfgang Denk talk to the UDC device 84016c8d5e7SWolfgang Denk 84116c8d5e7SWolfgang Denk CFG_CONSOLE_IS_IN_ENV 84216c8d5e7SWolfgang Denk Define this if you want stdin, stdout &/or stderr to 84316c8d5e7SWolfgang Denk be set to usbtty. 84416c8d5e7SWolfgang Denk 84516c8d5e7SWolfgang Denk mpc8xx: 84616c8d5e7SWolfgang Denk CFG_USB_EXTC_CLK 0xBLAH 84716c8d5e7SWolfgang Denk Derive USB clock from external clock "blah" 84816c8d5e7SWolfgang Denk - CFG_USB_EXTC_CLK 0x02 84916c8d5e7SWolfgang Denk 85016c8d5e7SWolfgang Denk CFG_USB_BRG_CLK 0xBLAH 85116c8d5e7SWolfgang Denk Derive USB clock from brgclk 85216c8d5e7SWolfgang Denk - CFG_USB_BRG_CLK 0x04 85316c8d5e7SWolfgang Denk 85416c8d5e7SWolfgang Denk If you have a USB-IF assigned VendorID then you may wish to 85516c8d5e7SWolfgang Denk define your own vendor specific values either in BoardName.h 85616c8d5e7SWolfgang Denk or directly in usbd_vendor_info.h. If you don't define 85716c8d5e7SWolfgang Denk CONFIG_USBD_MANUFACTURER, CONFIG_USBD_PRODUCT_NAME, 85816c8d5e7SWolfgang Denk CONFIG_USBD_VENDORID and CONFIG_USBD_PRODUCTID, then U-Boot 85916c8d5e7SWolfgang Denk should pretend to be a Linux device to it's target host. 86016c8d5e7SWolfgang Denk 86116c8d5e7SWolfgang Denk CONFIG_USBD_MANUFACTURER 86216c8d5e7SWolfgang Denk Define this string as the name of your company for 86316c8d5e7SWolfgang Denk - CONFIG_USBD_MANUFACTURER "my company" 86416c8d5e7SWolfgang Denk 86516c8d5e7SWolfgang Denk CONFIG_USBD_PRODUCT_NAME 86616c8d5e7SWolfgang Denk Define this string as the name of your product 86716c8d5e7SWolfgang Denk - CONFIG_USBD_PRODUCT_NAME "acme usb device" 86816c8d5e7SWolfgang Denk 86916c8d5e7SWolfgang Denk CONFIG_USBD_VENDORID 87016c8d5e7SWolfgang Denk Define this as your assigned Vendor ID from the USB 87116c8d5e7SWolfgang Denk Implementors Forum. This *must* be a genuine Vendor ID 87216c8d5e7SWolfgang Denk to avoid polluting the USB namespace. 87316c8d5e7SWolfgang Denk - CONFIG_USBD_VENDORID 0xFFFF 87416c8d5e7SWolfgang Denk 87516c8d5e7SWolfgang Denk CONFIG_USBD_PRODUCTID 87616c8d5e7SWolfgang Denk Define this as the unique Product ID 87716c8d5e7SWolfgang Denk for your device 87816c8d5e7SWolfgang Denk - CONFIG_USBD_PRODUCTID 0xFFFF 879c609719bSwdenk 880c609719bSwdenk 881c609719bSwdenk- MMC Support: 882c609719bSwdenk The MMC controller on the Intel PXA is supported. To 883c609719bSwdenk enable this define CONFIG_MMC. The MMC can be 884c609719bSwdenk accessed from the boot prompt by mapping the device 885c609719bSwdenk to physical memory similar to flash. Command line is 886602ad3b3SJon Loeliger enabled with CONFIG_CMD_MMC. The MMC driver also works with 887602ad3b3SJon Loeliger the FAT fs. This is enabled with CONFIG_CMD_FAT. 888c609719bSwdenk 8896705d81eSwdenk- Journaling Flash filesystem support: 8906705d81eSwdenk CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE, 8916705d81eSwdenk CONFIG_JFFS2_NAND_DEV 8926705d81eSwdenk Define these for a default partition on a NAND device 8936705d81eSwdenk 8946705d81eSwdenk CFG_JFFS2_FIRST_SECTOR, 8956705d81eSwdenk CFG_JFFS2_FIRST_BANK, CFG_JFFS2_NUM_BANKS 8966705d81eSwdenk Define these for a default partition on a NOR device 8976705d81eSwdenk 8986705d81eSwdenk CFG_JFFS_CUSTOM_PART 8996705d81eSwdenk Define this to create an own partition. You have to provide a 9006705d81eSwdenk function struct part_info* jffs2_part_info(int part_num) 9016705d81eSwdenk 9026705d81eSwdenk If you define only one JFFS2 partition you may also want to 9036705d81eSwdenk #define CFG_JFFS_SINGLE_PART 1 9046705d81eSwdenk to disable the command chpart. This is the default when you 9056705d81eSwdenk have not defined a custom partition 9066705d81eSwdenk 907c609719bSwdenk- Keyboard Support: 908c609719bSwdenk CONFIG_ISA_KEYBOARD 909c609719bSwdenk 910c609719bSwdenk Define this to enable standard (PC-Style) keyboard 911c609719bSwdenk support 912c609719bSwdenk 913c609719bSwdenk CONFIG_I8042_KBD 914c609719bSwdenk Standard PC keyboard driver with US (is default) and 915c609719bSwdenk GERMAN key layout (switch via environment 'keymap=de') support. 916c609719bSwdenk Export function i8042_kbd_init, i8042_tstc and i8042_getc 917c609719bSwdenk for cfb_console. Supports cursor blinking. 918c609719bSwdenk 919c609719bSwdenk- Video support: 920c609719bSwdenk CONFIG_VIDEO 921c609719bSwdenk 922c609719bSwdenk Define this to enable video support (for output to 923c609719bSwdenk video). 924c609719bSwdenk 925c609719bSwdenk CONFIG_VIDEO_CT69000 926c609719bSwdenk 927c609719bSwdenk Enable Chips & Technologies 69000 Video chip 928c609719bSwdenk 929c609719bSwdenk CONFIG_VIDEO_SMI_LYNXEM 930eeb1b77bSwdenk Enable Silicon Motion SMI 712/710/810 Video chip. The 931eeb1b77bSwdenk video output is selected via environment 'videoout' 932eeb1b77bSwdenk (1 = LCD and 2 = CRT). If videoout is undefined, CRT is 933eeb1b77bSwdenk assumed. 934c609719bSwdenk 935eeb1b77bSwdenk For the CT69000 and SMI_LYNXEM drivers, videomode is 93611ccc33fSMarcel Ziswiler selected via environment 'videomode'. Two different ways 937eeb1b77bSwdenk are possible: 938eeb1b77bSwdenk - "videomode=num" 'num' is a standard LiLo mode numbers. 939eeb1b77bSwdenk Following standard modes are supported (* is default): 940eeb1b77bSwdenk 941eeb1b77bSwdenk Colors 640x480 800x600 1024x768 1152x864 1280x1024 942eeb1b77bSwdenk -------------+--------------------------------------------- 943eeb1b77bSwdenk 8 bits | 0x301* 0x303 0x305 0x161 0x307 944eeb1b77bSwdenk 15 bits | 0x310 0x313 0x316 0x162 0x319 945eeb1b77bSwdenk 16 bits | 0x311 0x314 0x317 0x163 0x31A 946eeb1b77bSwdenk 24 bits | 0x312 0x315 0x318 ? 0x31B 947eeb1b77bSwdenk -------------+--------------------------------------------- 948c609719bSwdenk (i.e. setenv videomode 317; saveenv; reset;) 949c609719bSwdenk 950eeb1b77bSwdenk - "videomode=bootargs" all the video parameters are parsed 9517817cb20SMarcel Ziswiler from the bootargs. (See drivers/video/videomodes.c) 952eeb1b77bSwdenk 953eeb1b77bSwdenk 954a6c7ad2fSwdenk CONFIG_VIDEO_SED13806 955a6c7ad2fSwdenk Enable Epson SED13806 driver. This driver supports 8bpp 956a6c7ad2fSwdenk and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP 957a6c7ad2fSwdenk or CONFIG_VIDEO_SED13806_16BPP 958a6c7ad2fSwdenk 959682011ffSwdenk- Keyboard Support: 960682011ffSwdenk CONFIG_KEYBOARD 961682011ffSwdenk 962682011ffSwdenk Define this to enable a custom keyboard support. 963682011ffSwdenk This simply calls drv_keyboard_init() which must be 964682011ffSwdenk defined in your board-specific files. 965682011ffSwdenk The only board using this so far is RBC823. 966a6c7ad2fSwdenk 967c609719bSwdenk- LCD Support: CONFIG_LCD 968c609719bSwdenk 969c609719bSwdenk Define this to enable LCD support (for output to LCD 970c609719bSwdenk display); also select one of the supported displays 971c609719bSwdenk by defining one of these: 972c609719bSwdenk 97339cf4804SStelian Pop CONFIG_ATMEL_LCD: 97439cf4804SStelian Pop 97539cf4804SStelian Pop HITACHI TX09D70VM1CCA, 3.5", 240x320. 97639cf4804SStelian Pop 977fd3103bbSwdenk CONFIG_NEC_NL6448AC33: 978c609719bSwdenk 979fd3103bbSwdenk NEC NL6448AC33-18. Active, color, single scan. 980c609719bSwdenk 981fd3103bbSwdenk CONFIG_NEC_NL6448BC20 982c609719bSwdenk 983fd3103bbSwdenk NEC NL6448BC20-08. 6.5", 640x480. 984fd3103bbSwdenk Active, color, single scan. 985fd3103bbSwdenk 986fd3103bbSwdenk CONFIG_NEC_NL6448BC33_54 987fd3103bbSwdenk 988fd3103bbSwdenk NEC NL6448BC33-54. 10.4", 640x480. 989c609719bSwdenk Active, color, single scan. 990c609719bSwdenk 991c609719bSwdenk CONFIG_SHARP_16x9 992c609719bSwdenk 993c609719bSwdenk Sharp 320x240. Active, color, single scan. 994c609719bSwdenk It isn't 16x9, and I am not sure what it is. 995c609719bSwdenk 996c609719bSwdenk CONFIG_SHARP_LQ64D341 997c609719bSwdenk 998c609719bSwdenk Sharp LQ64D341 display, 640x480. 999c609719bSwdenk Active, color, single scan. 1000c609719bSwdenk 1001c609719bSwdenk CONFIG_HLD1045 1002c609719bSwdenk 1003c609719bSwdenk HLD1045 display, 640x480. 1004c609719bSwdenk Active, color, single scan. 1005c609719bSwdenk 1006c609719bSwdenk CONFIG_OPTREX_BW 1007c609719bSwdenk 1008c609719bSwdenk Optrex CBL50840-2 NF-FW 99 22 M5 1009c609719bSwdenk or 1010c609719bSwdenk Hitachi LMG6912RPFC-00T 1011c609719bSwdenk or 1012c609719bSwdenk Hitachi SP14Q002 1013c609719bSwdenk 1014c609719bSwdenk 320x240. Black & white. 1015c609719bSwdenk 1016c609719bSwdenk Normally display is black on white background; define 1017c609719bSwdenk CFG_WHITE_ON_BLACK to get it inverted. 1018c609719bSwdenk 10197152b1d0Swdenk- Splash Screen Support: CONFIG_SPLASH_SCREEN 1020d791b1dcSwdenk 1021d791b1dcSwdenk If this option is set, the environment is checked for 1022d791b1dcSwdenk a variable "splashimage". If found, the usual display 1023d791b1dcSwdenk of logo, copyright and system information on the LCD 1024e94d2cd9Swdenk is suppressed and the BMP image at the address 1025d791b1dcSwdenk specified in "splashimage" is loaded instead. The 1026d791b1dcSwdenk console is redirected to the "nulldev", too. This 1027d791b1dcSwdenk allows for a "silent" boot where a splash screen is 1028d791b1dcSwdenk loaded very quickly after power-on. 1029d791b1dcSwdenk 103098f4a3dfSStefan Roese- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP 103198f4a3dfSStefan Roese 103298f4a3dfSStefan Roese If this option is set, additionally to standard BMP 103398f4a3dfSStefan Roese images, gzipped BMP images can be displayed via the 103498f4a3dfSStefan Roese splashscreen support or the bmp command. 103598f4a3dfSStefan Roese 1036c29fdfc1Swdenk- Compression support: 1037c29fdfc1Swdenk CONFIG_BZIP2 1038c29fdfc1Swdenk 1039c29fdfc1Swdenk If this option is set, support for bzip2 compressed 1040c29fdfc1Swdenk images is included. If not, only uncompressed and gzip 1041c29fdfc1Swdenk compressed images are supported. 1042c29fdfc1Swdenk 1043c29fdfc1Swdenk NOTE: the bzip2 algorithm requires a lot of RAM, so 1044c29fdfc1Swdenk the malloc area (as defined by CFG_MALLOC_LEN) should 1045c29fdfc1Swdenk be at least 4MB. 1046d791b1dcSwdenk 104717ea1177Swdenk- MII/PHY support: 104817ea1177Swdenk CONFIG_PHY_ADDR 104917ea1177Swdenk 105017ea1177Swdenk The address of PHY on MII bus. 105117ea1177Swdenk 105217ea1177Swdenk CONFIG_PHY_CLOCK_FREQ (ppc4xx) 105317ea1177Swdenk 105417ea1177Swdenk The clock frequency of the MII bus 105517ea1177Swdenk 105617ea1177Swdenk CONFIG_PHY_GIGE 105717ea1177Swdenk 105817ea1177Swdenk If this option is set, support for speed/duplex 105911ccc33fSMarcel Ziswiler detection of gigabit PHY is included. 106017ea1177Swdenk 106117ea1177Swdenk CONFIG_PHY_RESET_DELAY 106217ea1177Swdenk 106317ea1177Swdenk Some PHY like Intel LXT971A need extra delay after 106417ea1177Swdenk reset before any MII register access is possible. 106517ea1177Swdenk For such PHY, set this option to the usec delay 106617ea1177Swdenk required. (minimum 300usec for LXT971A) 106717ea1177Swdenk 106817ea1177Swdenk CONFIG_PHY_CMD_DELAY (ppc4xx) 106917ea1177Swdenk 107017ea1177Swdenk Some PHY like Intel LXT971A need extra delay after 107117ea1177Swdenk command issued before MII status register can be read 107217ea1177Swdenk 1073c609719bSwdenk- Ethernet address: 1074c609719bSwdenk CONFIG_ETHADDR 1075c609719bSwdenk CONFIG_ETH2ADDR 1076c609719bSwdenk CONFIG_ETH3ADDR 1077c609719bSwdenk 107811ccc33fSMarcel Ziswiler Define a default value for Ethernet address to use 107911ccc33fSMarcel Ziswiler for the respective Ethernet interface, in case this 1080c609719bSwdenk is not determined automatically. 1081c609719bSwdenk 1082c609719bSwdenk- IP address: 1083c609719bSwdenk CONFIG_IPADDR 1084c609719bSwdenk 1085c609719bSwdenk Define a default value for the IP address to use for 108611ccc33fSMarcel Ziswiler the default Ethernet interface, in case this is not 1087c609719bSwdenk determined through e.g. bootp. 1088c609719bSwdenk 1089c609719bSwdenk- Server IP address: 1090c609719bSwdenk CONFIG_SERVERIP 1091c609719bSwdenk 1092c609719bSwdenk Defines a default value for the IP address of a TFTP 1093c609719bSwdenk server to contact when using the "tftboot" command. 1094c609719bSwdenk 109553a5c424SDavid Updegraff- Multicast TFTP Mode: 109653a5c424SDavid Updegraff CONFIG_MCAST_TFTP 109753a5c424SDavid Updegraff 109853a5c424SDavid Updegraff Defines whether you want to support multicast TFTP as per 109953a5c424SDavid Updegraff rfc-2090; for example to work with atftp. Lets lots of targets 110011ccc33fSMarcel Ziswiler tftp down the same boot image concurrently. Note: the Ethernet 110153a5c424SDavid Updegraff driver in use must provide a function: mcast() to join/leave a 110253a5c424SDavid Updegraff multicast group. 110353a5c424SDavid Updegraff 110453a5c424SDavid Updegraff CONFIG_BOOTP_RANDOM_DELAY 1105c609719bSwdenk- BOOTP Recovery Mode: 1106c609719bSwdenk CONFIG_BOOTP_RANDOM_DELAY 1107c609719bSwdenk 1108c609719bSwdenk If you have many targets in a network that try to 1109c609719bSwdenk boot using BOOTP, you may want to avoid that all 1110c609719bSwdenk systems send out BOOTP requests at precisely the same 1111c609719bSwdenk moment (which would happen for instance at recovery 1112c609719bSwdenk from a power failure, when all systems will try to 1113c609719bSwdenk boot, thus flooding the BOOTP server. Defining 1114c609719bSwdenk CONFIG_BOOTP_RANDOM_DELAY causes a random delay to be 1115c609719bSwdenk inserted before sending out BOOTP requests. The 11166c33c785SWolfgang Denk following delays are inserted then: 1117c609719bSwdenk 1118c609719bSwdenk 1st BOOTP request: delay 0 ... 1 sec 1119c609719bSwdenk 2nd BOOTP request: delay 0 ... 2 sec 1120c609719bSwdenk 3rd BOOTP request: delay 0 ... 4 sec 1121c609719bSwdenk 4th and following 1122c609719bSwdenk BOOTP requests: delay 0 ... 8 sec 1123c609719bSwdenk 1124fe389a82Sstroese- DHCP Advanced Options: 11251fe80d79SJon Loeliger You can fine tune the DHCP functionality by defining 11261fe80d79SJon Loeliger CONFIG_BOOTP_* symbols: 1127fe389a82Sstroese 11281fe80d79SJon Loeliger CONFIG_BOOTP_SUBNETMASK 11291fe80d79SJon Loeliger CONFIG_BOOTP_GATEWAY 11301fe80d79SJon Loeliger CONFIG_BOOTP_HOSTNAME 11311fe80d79SJon Loeliger CONFIG_BOOTP_NISDOMAIN 11321fe80d79SJon Loeliger CONFIG_BOOTP_BOOTPATH 11331fe80d79SJon Loeliger CONFIG_BOOTP_BOOTFILESIZE 11341fe80d79SJon Loeliger CONFIG_BOOTP_DNS 11351fe80d79SJon Loeliger CONFIG_BOOTP_DNS2 11361fe80d79SJon Loeliger CONFIG_BOOTP_SEND_HOSTNAME 11371fe80d79SJon Loeliger CONFIG_BOOTP_NTPSERVER 11381fe80d79SJon Loeliger CONFIG_BOOTP_TIMEOFFSET 11391fe80d79SJon Loeliger CONFIG_BOOTP_VENDOREX 1140fe389a82Sstroese 11415d110f0aSWilson Callan CONFIG_BOOTP_SERVERIP - TFTP server will be the serverip 11425d110f0aSWilson Callan environment variable, not the BOOTP server. 1143fe389a82Sstroese 1144fe389a82Sstroese CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS 1145fe389a82Sstroese serverip from a DHCP server, it is possible that more 1146fe389a82Sstroese than one DNS serverip is offered to the client. 1147fe389a82Sstroese If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS 1148fe389a82Sstroese serverip will be stored in the additional environment 1149fe389a82Sstroese variable "dnsip2". The first DNS serverip is always 1150fe389a82Sstroese stored in the variable "dnsip", when CONFIG_BOOTP_DNS 11511fe80d79SJon Loeliger is defined. 1152fe389a82Sstroese 1153fe389a82Sstroese CONFIG_BOOTP_SEND_HOSTNAME - Some DHCP servers are capable 1154fe389a82Sstroese to do a dynamic update of a DNS server. To do this, they 1155fe389a82Sstroese need the hostname of the DHCP requester. 11565d110f0aSWilson Callan If CONFIG_BOOTP_SEND_HOSTNAME is defined, the content 11571fe80d79SJon Loeliger of the "hostname" environment variable is passed as 11581fe80d79SJon Loeliger option 12 to the DHCP server. 1159fe389a82Sstroese 1160d9a2f416SAras Vaichas CONFIG_BOOTP_DHCP_REQUEST_DELAY 1161d9a2f416SAras Vaichas 1162d9a2f416SAras Vaichas A 32bit value in microseconds for a delay between 1163d9a2f416SAras Vaichas receiving a "DHCP Offer" and sending the "DHCP Request". 1164d9a2f416SAras Vaichas This fixes a problem with certain DHCP servers that don't 1165d9a2f416SAras Vaichas respond 100% of the time to a "DHCP request". E.g. On an 1166d9a2f416SAras Vaichas AT91RM9200 processor running at 180MHz, this delay needed 1167d9a2f416SAras Vaichas to be *at least* 15,000 usec before a Windows Server 2003 1168d9a2f416SAras Vaichas DHCP server would reply 100% of the time. I recommend at 1169d9a2f416SAras Vaichas least 50,000 usec to be safe. The alternative is to hope 1170d9a2f416SAras Vaichas that one of the retries will be successful but note that 1171d9a2f416SAras Vaichas the DHCP timeout and retry process takes a longer than 1172d9a2f416SAras Vaichas this delay. 1173d9a2f416SAras Vaichas 1174a3d991bdSwdenk - CDP Options: 1175a3d991bdSwdenk CONFIG_CDP_DEVICE_ID 1176a3d991bdSwdenk 1177a3d991bdSwdenk The device id used in CDP trigger frames. 1178a3d991bdSwdenk 1179a3d991bdSwdenk CONFIG_CDP_DEVICE_ID_PREFIX 1180a3d991bdSwdenk 1181a3d991bdSwdenk A two character string which is prefixed to the MAC address 1182a3d991bdSwdenk of the device. 1183a3d991bdSwdenk 1184a3d991bdSwdenk CONFIG_CDP_PORT_ID 1185a3d991bdSwdenk 1186a3d991bdSwdenk A printf format string which contains the ascii name of 1187a3d991bdSwdenk the port. Normally is set to "eth%d" which sets 118811ccc33fSMarcel Ziswiler eth0 for the first Ethernet, eth1 for the second etc. 1189a3d991bdSwdenk 1190a3d991bdSwdenk CONFIG_CDP_CAPABILITIES 1191a3d991bdSwdenk 1192a3d991bdSwdenk A 32bit integer which indicates the device capabilities; 1193a3d991bdSwdenk 0x00000010 for a normal host which does not forwards. 1194a3d991bdSwdenk 1195a3d991bdSwdenk CONFIG_CDP_VERSION 1196a3d991bdSwdenk 1197a3d991bdSwdenk An ascii string containing the version of the software. 1198a3d991bdSwdenk 1199a3d991bdSwdenk CONFIG_CDP_PLATFORM 1200a3d991bdSwdenk 1201a3d991bdSwdenk An ascii string containing the name of the platform. 1202a3d991bdSwdenk 1203a3d991bdSwdenk CONFIG_CDP_TRIGGER 1204a3d991bdSwdenk 1205a3d991bdSwdenk A 32bit integer sent on the trigger. 1206a3d991bdSwdenk 1207a3d991bdSwdenk CONFIG_CDP_POWER_CONSUMPTION 1208a3d991bdSwdenk 1209a3d991bdSwdenk A 16bit integer containing the power consumption of the 1210a3d991bdSwdenk device in .1 of milliwatts. 1211a3d991bdSwdenk 1212a3d991bdSwdenk CONFIG_CDP_APPLIANCE_VLAN_TYPE 1213a3d991bdSwdenk 1214a3d991bdSwdenk A byte containing the id of the VLAN. 1215a3d991bdSwdenk 1216c609719bSwdenk- Status LED: CONFIG_STATUS_LED 1217c609719bSwdenk 1218c609719bSwdenk Several configurations allow to display the current 1219c609719bSwdenk status using a LED. For instance, the LED will blink 1220c609719bSwdenk fast while running U-Boot code, stop blinking as 1221c609719bSwdenk soon as a reply to a BOOTP request was received, and 1222c609719bSwdenk start blinking slow once the Linux kernel is running 1223c609719bSwdenk (supported by a status LED driver in the Linux 1224c609719bSwdenk kernel). Defining CONFIG_STATUS_LED enables this 1225c609719bSwdenk feature in U-Boot. 1226c609719bSwdenk 1227c609719bSwdenk- CAN Support: CONFIG_CAN_DRIVER 1228c609719bSwdenk 1229c609719bSwdenk Defining CONFIG_CAN_DRIVER enables CAN driver support 1230c609719bSwdenk on those systems that support this (optional) 1231c609719bSwdenk feature, like the TQM8xxL modules. 1232c609719bSwdenk 1233c609719bSwdenk- I2C Support: CONFIG_HARD_I2C | CONFIG_SOFT_I2C 1234c609719bSwdenk 1235b37c7e5eSwdenk These enable I2C serial bus commands. Defining either of 1236b37c7e5eSwdenk (but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will 123711ccc33fSMarcel Ziswiler include the appropriate I2C driver for the selected CPU. 1238c609719bSwdenk 1239b37c7e5eSwdenk This will allow you to use i2c commands at the u-boot 1240602ad3b3SJon Loeliger command line (as long as you set CONFIG_CMD_I2C in 1241b37c7e5eSwdenk CONFIG_COMMANDS) and communicate with i2c based realtime 1242b37c7e5eSwdenk clock chips. See common/cmd_i2c.c for a description of the 1243c609719bSwdenk command line interface. 1244c609719bSwdenk 1245bb99ad6dSBen Warren CONFIG_I2C_CMD_TREE is a recommended option that places 1246bb99ad6dSBen Warren all I2C commands under a single 'i2c' root command. The 1247bb99ad6dSBen Warren older 'imm', 'imd', 'iprobe' etc. commands are considered 1248bb99ad6dSBen Warren deprecated and may disappear in the future. 1249bb99ad6dSBen Warren 1250bb99ad6dSBen Warren CONFIG_HARD_I2C selects a hardware I2C controller. 1251c609719bSwdenk 1252b37c7e5eSwdenk CONFIG_SOFT_I2C configures u-boot to use a software (aka 1253b37c7e5eSwdenk bit-banging) driver instead of CPM or similar hardware 1254b37c7e5eSwdenk support for I2C. 1255c609719bSwdenk 1256b37c7e5eSwdenk There are several other quantities that must also be 1257b37c7e5eSwdenk defined when you define CONFIG_HARD_I2C or CONFIG_SOFT_I2C. 1258c609719bSwdenk 1259b37c7e5eSwdenk In both cases you will need to define CFG_I2C_SPEED 1260b37c7e5eSwdenk to be the frequency (in Hz) at which you wish your i2c bus 1261b37c7e5eSwdenk to run and CFG_I2C_SLAVE to be the address of this node (ie 126211ccc33fSMarcel Ziswiler the CPU's i2c node address). 1263c609719bSwdenk 1264b37c7e5eSwdenk Now, the u-boot i2c code for the mpc8xx (cpu/mpc8xx/i2c.c) 126511ccc33fSMarcel Ziswiler sets the CPU up as a master node and so its address should 1266b37c7e5eSwdenk therefore be cleared to 0 (See, eg, MPC823e User's Manual 1267b37c7e5eSwdenk p.16-473). So, set CFG_I2C_SLAVE to 0. 1268b37c7e5eSwdenk 1269b37c7e5eSwdenk That's all that's required for CONFIG_HARD_I2C. 1270b37c7e5eSwdenk 1271b37c7e5eSwdenk If you use the software i2c interface (CONFIG_SOFT_I2C) 1272b37c7e5eSwdenk then the following macros need to be defined (examples are 1273b37c7e5eSwdenk from include/configs/lwmon.h): 1274c609719bSwdenk 1275c609719bSwdenk I2C_INIT 1276c609719bSwdenk 1277b37c7e5eSwdenk (Optional). Any commands necessary to enable the I2C 1278c609719bSwdenk controller or configure ports. 1279c609719bSwdenk 1280b37c7e5eSwdenk eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) 1281b37c7e5eSwdenk 1282c609719bSwdenk I2C_PORT 1283c609719bSwdenk 1284c609719bSwdenk (Only for MPC8260 CPU). The I/O port to use (the code 1285c609719bSwdenk assumes both bits are on the same port). Valid values 1286c609719bSwdenk are 0..3 for ports A..D. 1287c609719bSwdenk 1288c609719bSwdenk I2C_ACTIVE 1289c609719bSwdenk 1290c609719bSwdenk The code necessary to make the I2C data line active 1291c609719bSwdenk (driven). If the data line is open collector, this 1292c609719bSwdenk define can be null. 1293c609719bSwdenk 1294b37c7e5eSwdenk eg: #define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) 1295b37c7e5eSwdenk 1296c609719bSwdenk I2C_TRISTATE 1297c609719bSwdenk 1298c609719bSwdenk The code necessary to make the I2C data line tri-stated 1299c609719bSwdenk (inactive). If the data line is open collector, this 1300c609719bSwdenk define can be null. 1301c609719bSwdenk 1302b37c7e5eSwdenk eg: #define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) 1303b37c7e5eSwdenk 1304c609719bSwdenk I2C_READ 1305c609719bSwdenk 1306c609719bSwdenk Code that returns TRUE if the I2C data line is high, 1307c609719bSwdenk FALSE if it is low. 1308c609719bSwdenk 1309b37c7e5eSwdenk eg: #define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) 1310b37c7e5eSwdenk 1311c609719bSwdenk I2C_SDA(bit) 1312c609719bSwdenk 1313c609719bSwdenk If <bit> is TRUE, sets the I2C data line high. If it 1314c609719bSwdenk is FALSE, it clears it (low). 1315c609719bSwdenk 1316b37c7e5eSwdenk eg: #define I2C_SDA(bit) \ 1317b37c7e5eSwdenk if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ 1318b37c7e5eSwdenk else immr->im_cpm.cp_pbdat &= ~PB_SDA 1319b37c7e5eSwdenk 1320c609719bSwdenk I2C_SCL(bit) 1321c609719bSwdenk 1322c609719bSwdenk If <bit> is TRUE, sets the I2C clock line high. If it 1323c609719bSwdenk is FALSE, it clears it (low). 1324c609719bSwdenk 1325b37c7e5eSwdenk eg: #define I2C_SCL(bit) \ 1326b37c7e5eSwdenk if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ 1327b37c7e5eSwdenk else immr->im_cpm.cp_pbdat &= ~PB_SCL 1328b37c7e5eSwdenk 1329c609719bSwdenk I2C_DELAY 1330c609719bSwdenk 1331c609719bSwdenk This delay is invoked four times per clock cycle so this 1332c609719bSwdenk controls the rate of data transfer. The data rate thus 1333b37c7e5eSwdenk is 1 / (I2C_DELAY * 4). Often defined to be something 1334b37c7e5eSwdenk like: 1335b37c7e5eSwdenk 1336b37c7e5eSwdenk #define I2C_DELAY udelay(2) 1337c609719bSwdenk 133847cd00faSwdenk CFG_I2C_INIT_BOARD 133947cd00faSwdenk 134047cd00faSwdenk When a board is reset during an i2c bus transfer 134147cd00faSwdenk chips might think that the current transfer is still 134247cd00faSwdenk in progress. On some boards it is possible to access 134347cd00faSwdenk the i2c SCLK line directly, either by using the 134447cd00faSwdenk processor pin as a GPIO or by having a second pin 134547cd00faSwdenk connected to the bus. If this option is defined a 134647cd00faSwdenk custom i2c_init_board() routine in boards/xxx/board.c 134747cd00faSwdenk is run early in the boot sequence. 134847cd00faSwdenk 134917ea1177Swdenk CONFIG_I2CFAST (PPC405GP|PPC405EP only) 135017ea1177Swdenk 135117ea1177Swdenk This option enables configuration of bi_iic_fast[] flags 135217ea1177Swdenk in u-boot bd_info structure based on u-boot environment 135317ea1177Swdenk variable "i2cfast". (see also i2cfast) 135417ea1177Swdenk 1355bb99ad6dSBen Warren CONFIG_I2C_MULTI_BUS 1356bb99ad6dSBen Warren 1357bb99ad6dSBen Warren This option allows the use of multiple I2C buses, each of which 1358bb99ad6dSBen Warren must have a controller. At any point in time, only one bus is 1359bb99ad6dSBen Warren active. To switch to a different bus, use the 'i2c dev' command. 1360bb99ad6dSBen Warren Note that bus numbering is zero-based. 1361bb99ad6dSBen Warren 1362bb99ad6dSBen Warren CFG_I2C_NOPROBES 1363bb99ad6dSBen Warren 1364bb99ad6dSBen Warren This option specifies a list of I2C devices that will be skipped 1365bb99ad6dSBen Warren when the 'i2c probe' command is issued (or 'iprobe' using the legacy 1366bb99ad6dSBen Warren command). If CONFIG_I2C_MULTI_BUS is set, specify a list of bus-device 1367bb99ad6dSBen Warren pairs. Otherwise, specify a 1D array of device addresses 1368bb99ad6dSBen Warren 1369bb99ad6dSBen Warren e.g. 1370bb99ad6dSBen Warren #undef CONFIG_I2C_MULTI_BUS 1371bb99ad6dSBen Warren #define CFG_I2C_NOPROBES {0x50,0x68} 1372bb99ad6dSBen Warren 1373bb99ad6dSBen Warren will skip addresses 0x50 and 0x68 on a board with one I2C bus 1374bb99ad6dSBen Warren 1375bb99ad6dSBen Warren #define CONFIG_I2C_MULTI_BUS 1376bb99ad6dSBen Warren #define CFG_I2C_MULTI_NOPROBES {{0,0x50},{0,0x68},{1,0x54}} 1377bb99ad6dSBen Warren 1378bb99ad6dSBen Warren will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1 1379bb99ad6dSBen Warren 1380be5e6181STimur Tabi CFG_SPD_BUS_NUM 1381be5e6181STimur Tabi 1382be5e6181STimur Tabi If defined, then this indicates the I2C bus number for DDR SPD. 1383be5e6181STimur Tabi If not defined, then U-Boot assumes that SPD is on I2C bus 0. 1384be5e6181STimur Tabi 13850dc018ecSStefan Roese CFG_RTC_BUS_NUM 13860dc018ecSStefan Roese 13870dc018ecSStefan Roese If defined, then this indicates the I2C bus number for the RTC. 13880dc018ecSStefan Roese If not defined, then U-Boot assumes that RTC is on I2C bus 0. 13890dc018ecSStefan Roese 13900dc018ecSStefan Roese CFG_DTT_BUS_NUM 13910dc018ecSStefan Roese 13920dc018ecSStefan Roese If defined, then this indicates the I2C bus number for the DTT. 13930dc018ecSStefan Roese If not defined, then U-Boot assumes that DTT is on I2C bus 0. 13940dc018ecSStefan Roese 1395be5e6181STimur Tabi CONFIG_FSL_I2C 1396be5e6181STimur Tabi 1397be5e6181STimur Tabi Define this option if you want to use Freescale's I2C driver in 13987817cb20SMarcel Ziswiler drivers/i2c/fsl_i2c.c. 1399be5e6181STimur Tabi 1400be5e6181STimur Tabi 1401c609719bSwdenk- SPI Support: CONFIG_SPI 1402c609719bSwdenk 1403c609719bSwdenk Enables SPI driver (so far only tested with 1404c609719bSwdenk SPI EEPROM, also an instance works with Crystal A/D and 1405c609719bSwdenk D/As on the SACSng board) 1406c609719bSwdenk 1407c609719bSwdenk CONFIG_SPI_X 1408c609719bSwdenk 1409c609719bSwdenk Enables extended (16-bit) SPI EEPROM addressing. 1410c609719bSwdenk (symmetrical to CONFIG_I2C_X) 1411c609719bSwdenk 1412c609719bSwdenk CONFIG_SOFT_SPI 1413c609719bSwdenk 1414c609719bSwdenk Enables a software (bit-bang) SPI driver rather than 1415c609719bSwdenk using hardware support. This is a general purpose 1416c609719bSwdenk driver that only requires three general I/O port pins 1417c609719bSwdenk (two outputs, one input) to function. If this is 1418c609719bSwdenk defined, the board configuration must define several 1419c609719bSwdenk SPI configuration items (port pins to use, etc). For 1420c609719bSwdenk an example, see include/configs/sacsng.h. 1421c609719bSwdenk 142204a9e118SBen Warren CONFIG_HARD_SPI 142304a9e118SBen Warren 142404a9e118SBen Warren Enables a hardware SPI driver for general-purpose reads 142504a9e118SBen Warren and writes. As with CONFIG_SOFT_SPI, the board configuration 142604a9e118SBen Warren must define a list of chip-select function pointers. 142704a9e118SBen Warren Currently supported on some MPC8xxx processors. For an 142804a9e118SBen Warren example, see include/configs/mpc8349emds.h. 142904a9e118SBen Warren 143038254f45SGuennadi Liakhovetski CONFIG_MXC_SPI 143138254f45SGuennadi Liakhovetski 143238254f45SGuennadi Liakhovetski Enables the driver for the SPI controllers on i.MX and MXC 143338254f45SGuennadi Liakhovetski SoCs. Currently only i.MX31 is supported. 143438254f45SGuennadi Liakhovetski 14350133502eSMatthias Fuchs- FPGA Support: CONFIG_FPGA 14360133502eSMatthias Fuchs 14370133502eSMatthias Fuchs Enables FPGA subsystem. 14380133502eSMatthias Fuchs 14390133502eSMatthias Fuchs CONFIG_FPGA_<vendor> 14400133502eSMatthias Fuchs 14410133502eSMatthias Fuchs Enables support for specific chip vendors. 14420133502eSMatthias Fuchs (ALTERA, XILINX) 14430133502eSMatthias Fuchs 14440133502eSMatthias Fuchs CONFIG_FPGA_<family> 14450133502eSMatthias Fuchs 14460133502eSMatthias Fuchs Enables support for FPGA family. 14470133502eSMatthias Fuchs (SPARTAN2, SPARTAN3, VIRTEX2, CYCLONE2, ACEX1K, ACEX) 14480133502eSMatthias Fuchs 14490133502eSMatthias Fuchs CONFIG_FPGA_COUNT 1450c609719bSwdenk 1451c609719bSwdenk Specify the number of FPGA devices to support. 1452c609719bSwdenk 1453c609719bSwdenk CFG_FPGA_PROG_FEEDBACK 1454c609719bSwdenk 1455c609719bSwdenk Enable printing of hash marks during FPGA configuration. 1456c609719bSwdenk 1457c609719bSwdenk CFG_FPGA_CHECK_BUSY 1458c609719bSwdenk 1459c609719bSwdenk Enable checks on FPGA configuration interface busy 1460c609719bSwdenk status by the configuration function. This option 1461c609719bSwdenk will require a board or device specific function to 1462c609719bSwdenk be written. 1463c609719bSwdenk 1464c609719bSwdenk CONFIG_FPGA_DELAY 1465c609719bSwdenk 1466c609719bSwdenk If defined, a function that provides delays in the FPGA 1467c609719bSwdenk configuration driver. 1468c609719bSwdenk 1469c609719bSwdenk CFG_FPGA_CHECK_CTRLC 1470c609719bSwdenk Allow Control-C to interrupt FPGA configuration 1471c609719bSwdenk 1472c609719bSwdenk CFG_FPGA_CHECK_ERROR 1473c609719bSwdenk 1474c609719bSwdenk Check for configuration errors during FPGA bitfile 1475c609719bSwdenk loading. For example, abort during Virtex II 1476c609719bSwdenk configuration if the INIT_B line goes low (which 1477c609719bSwdenk indicated a CRC error). 1478c609719bSwdenk 1479c609719bSwdenk CFG_FPGA_WAIT_INIT 1480c609719bSwdenk 1481c609719bSwdenk Maximum time to wait for the INIT_B line to deassert 1482c609719bSwdenk after PROB_B has been deasserted during a Virtex II 1483c609719bSwdenk FPGA configuration sequence. The default time is 500 148411ccc33fSMarcel Ziswiler ms. 1485c609719bSwdenk 1486c609719bSwdenk CFG_FPGA_WAIT_BUSY 1487c609719bSwdenk 1488c609719bSwdenk Maximum time to wait for BUSY to deassert during 148911ccc33fSMarcel Ziswiler Virtex II FPGA configuration. The default is 5 ms. 1490c609719bSwdenk 1491c609719bSwdenk CFG_FPGA_WAIT_CONFIG 1492c609719bSwdenk 1493c609719bSwdenk Time to wait after FPGA configuration. The default is 149411ccc33fSMarcel Ziswiler 200 ms. 1495c609719bSwdenk 1496c609719bSwdenk- Configuration Management: 1497c609719bSwdenk CONFIG_IDENT_STRING 1498c609719bSwdenk 1499c609719bSwdenk If defined, this string will be added to the U-Boot 1500c609719bSwdenk version information (U_BOOT_VERSION) 1501c609719bSwdenk 1502c609719bSwdenk- Vendor Parameter Protection: 1503c609719bSwdenk 1504c609719bSwdenk U-Boot considers the values of the environment 1505c609719bSwdenk variables "serial#" (Board Serial Number) and 15067152b1d0Swdenk "ethaddr" (Ethernet Address) to be parameters that 1507c609719bSwdenk are set once by the board vendor / manufacturer, and 1508c609719bSwdenk protects these variables from casual modification by 1509c609719bSwdenk the user. Once set, these variables are read-only, 1510c609719bSwdenk and write or delete attempts are rejected. You can 151111ccc33fSMarcel Ziswiler change this behaviour: 1512c609719bSwdenk 1513c609719bSwdenk If CONFIG_ENV_OVERWRITE is #defined in your config 1514c609719bSwdenk file, the write protection for vendor parameters is 151547cd00faSwdenk completely disabled. Anybody can change or delete 1516c609719bSwdenk these parameters. 1517c609719bSwdenk 1518c609719bSwdenk Alternatively, if you #define _both_ CONFIG_ETHADDR 1519c609719bSwdenk _and_ CONFIG_OVERWRITE_ETHADDR_ONCE, a default 152011ccc33fSMarcel Ziswiler Ethernet address is installed in the environment, 1521c609719bSwdenk which can be changed exactly ONCE by the user. [The 1522c609719bSwdenk serial# is unaffected by this, i. e. it remains 1523c609719bSwdenk read-only.] 1524c609719bSwdenk 1525c609719bSwdenk- Protected RAM: 1526c609719bSwdenk CONFIG_PRAM 1527c609719bSwdenk 1528c609719bSwdenk Define this variable to enable the reservation of 1529c609719bSwdenk "protected RAM", i. e. RAM which is not overwritten 1530c609719bSwdenk by U-Boot. Define CONFIG_PRAM to hold the number of 1531c609719bSwdenk kB you want to reserve for pRAM. You can overwrite 1532c609719bSwdenk this default value by defining an environment 1533c609719bSwdenk variable "pram" to the number of kB you want to 1534c609719bSwdenk reserve. Note that the board info structure will 1535c609719bSwdenk still show the full amount of RAM. If pRAM is 1536c609719bSwdenk reserved, a new environment variable "mem" will 1537c609719bSwdenk automatically be defined to hold the amount of 1538c609719bSwdenk remaining RAM in a form that can be passed as boot 1539c609719bSwdenk argument to Linux, for instance like that: 1540c609719bSwdenk 1541fe126d8bSWolfgang Denk setenv bootargs ... mem=\${mem} 1542c609719bSwdenk saveenv 1543c609719bSwdenk 1544c609719bSwdenk This way you can tell Linux not to use this memory, 1545c609719bSwdenk either, which results in a memory region that will 1546c609719bSwdenk not be affected by reboots. 1547c609719bSwdenk 1548c609719bSwdenk *WARNING* If your board configuration uses automatic 1549c609719bSwdenk detection of the RAM size, you must make sure that 1550c609719bSwdenk this memory test is non-destructive. So far, the 1551c609719bSwdenk following board configurations are known to be 1552c609719bSwdenk "pRAM-clean": 1553c609719bSwdenk 1554c609719bSwdenk ETX094, IVMS8, IVML24, SPD8xx, TQM8xxL, 1555c609719bSwdenk HERMES, IP860, RPXlite, LWMON, LANTEC, 1556c609719bSwdenk PCU_E, FLAGADM, TQM8260 1557c609719bSwdenk 1558c609719bSwdenk- Error Recovery: 1559c609719bSwdenk CONFIG_PANIC_HANG 1560c609719bSwdenk 1561c609719bSwdenk Define this variable to stop the system in case of a 1562c609719bSwdenk fatal error, so that you have to reset it manually. 1563c609719bSwdenk This is probably NOT a good idea for an embedded 156411ccc33fSMarcel Ziswiler system where you want the system to reboot 1565c609719bSwdenk automatically as fast as possible, but it may be 1566c609719bSwdenk useful during development since you can try to debug 1567c609719bSwdenk the conditions that lead to the situation. 1568c609719bSwdenk 1569c609719bSwdenk CONFIG_NET_RETRY_COUNT 1570c609719bSwdenk 1571c609719bSwdenk This variable defines the number of retries for 1572c609719bSwdenk network operations like ARP, RARP, TFTP, or BOOTP 1573c609719bSwdenk before giving up the operation. If not defined, a 1574c609719bSwdenk default value of 5 is used. 1575c609719bSwdenk 157640cb90eeSGuennadi Liakhovetski CONFIG_ARP_TIMEOUT 157740cb90eeSGuennadi Liakhovetski 157840cb90eeSGuennadi Liakhovetski Timeout waiting for an ARP reply in milliseconds. 157940cb90eeSGuennadi Liakhovetski 1580c609719bSwdenk- Command Interpreter: 15818078f1a5SWolfgang Denk CONFIG_AUTO_COMPLETE 158204a85b3bSwdenk 158304a85b3bSwdenk Enable auto completion of commands using TAB. 158404a85b3bSwdenk 15858078f1a5SWolfgang Denk Note that this feature has NOT been implemented yet 15868078f1a5SWolfgang Denk for the "hush" shell. 15878078f1a5SWolfgang Denk 15888078f1a5SWolfgang Denk 1589c609719bSwdenk CFG_HUSH_PARSER 1590c609719bSwdenk 1591c609719bSwdenk Define this variable to enable the "hush" shell (from 1592c609719bSwdenk Busybox) as command line interpreter, thus enabling 1593c609719bSwdenk powerful command line syntax like 1594c609719bSwdenk if...then...else...fi conditionals or `&&' and '||' 1595c609719bSwdenk constructs ("shell scripts"). 1596c609719bSwdenk 1597c609719bSwdenk If undefined, you get the old, much simpler behaviour 1598c609719bSwdenk with a somewhat smaller memory footprint. 1599c609719bSwdenk 1600c609719bSwdenk 1601c609719bSwdenk CFG_PROMPT_HUSH_PS2 1602c609719bSwdenk 1603c609719bSwdenk This defines the secondary prompt string, which is 1604c609719bSwdenk printed when the command interpreter needs more input 1605c609719bSwdenk to complete a command. Usually "> ". 1606c609719bSwdenk 1607c609719bSwdenk Note: 1608c609719bSwdenk 1609c609719bSwdenk In the current implementation, the local variables 1610c609719bSwdenk space and global environment variables space are 1611c609719bSwdenk separated. Local variables are those you define by 16123b57fe0aSwdenk simply typing `name=value'. To access a local 1613c609719bSwdenk variable later on, you have write `$name' or 16143b57fe0aSwdenk `${name}'; to execute the contents of a variable 16153b57fe0aSwdenk directly type `$name' at the command prompt. 1616c609719bSwdenk 1617c609719bSwdenk Global environment variables are those you use 1618c609719bSwdenk setenv/printenv to work with. To run a command stored 1619c609719bSwdenk in such a variable, you need to use the run command, 1620c609719bSwdenk and you must not use the '$' sign to access them. 1621c609719bSwdenk 1622c609719bSwdenk To store commands and special characters in a 1623c609719bSwdenk variable, please use double quotation marks 1624c609719bSwdenk surrounding the whole text of the variable, instead 1625c609719bSwdenk of the backslashes before semicolons and special 1626c609719bSwdenk symbols. 1627c609719bSwdenk 1628aa0c71acSWolfgang Denk- Commandline Editing and History: 1629aa0c71acSWolfgang Denk CONFIG_CMDLINE_EDITING 1630aa0c71acSWolfgang Denk 163111ccc33fSMarcel Ziswiler Enable editing and History functions for interactive 1632aa0c71acSWolfgang Denk commandline input operations 1633aa0c71acSWolfgang Denk 1634a8c7c708Swdenk- Default Environment: 1635c609719bSwdenk CONFIG_EXTRA_ENV_SETTINGS 1636c609719bSwdenk 1637c609719bSwdenk Define this to contain any number of null terminated 1638c609719bSwdenk strings (variable = value pairs) that will be part of 16397152b1d0Swdenk the default environment compiled into the boot image. 16402262cfeeSwdenk 1641c609719bSwdenk For example, place something like this in your 1642c609719bSwdenk board's config file: 1643c609719bSwdenk 1644c609719bSwdenk #define CONFIG_EXTRA_ENV_SETTINGS \ 1645c609719bSwdenk "myvar1=value1\0" \ 1646c609719bSwdenk "myvar2=value2\0" 1647c609719bSwdenk 1648c609719bSwdenk Warning: This method is based on knowledge about the 1649c609719bSwdenk internal format how the environment is stored by the 16502262cfeeSwdenk U-Boot code. This is NOT an official, exported 1651c609719bSwdenk interface! Although it is unlikely that this format 16527152b1d0Swdenk will change soon, there is no guarantee either. 1653c609719bSwdenk You better know what you are doing here. 1654c609719bSwdenk 1655c609719bSwdenk Note: overly (ab)use of the default environment is 1656c609719bSwdenk discouraged. Make sure to check other ways to preset 1657c609719bSwdenk the environment like the autoscript function or the 1658c609719bSwdenk boot command first. 1659c609719bSwdenk 1660a8c7c708Swdenk- DataFlash Support: 16612abbe075Swdenk CONFIG_HAS_DATAFLASH 16622abbe075Swdenk 16632abbe075Swdenk Defining this option enables DataFlash features and 16642abbe075Swdenk allows to read/write in Dataflash via the standard 16652abbe075Swdenk commands cp, md... 16662abbe075Swdenk 16673f85ce27Swdenk- SystemACE Support: 16683f85ce27Swdenk CONFIG_SYSTEMACE 16693f85ce27Swdenk 16703f85ce27Swdenk Adding this option adds support for Xilinx SystemACE 16713f85ce27Swdenk chips attached via some sort of local bus. The address 167211ccc33fSMarcel Ziswiler of the chip must also be defined in the 16733f85ce27Swdenk CFG_SYSTEMACE_BASE macro. For example: 16743f85ce27Swdenk 16753f85ce27Swdenk #define CONFIG_SYSTEMACE 16763f85ce27Swdenk #define CFG_SYSTEMACE_BASE 0xf0000000 16773f85ce27Swdenk 16783f85ce27Swdenk When SystemACE support is added, the "ace" device type 16793f85ce27Swdenk becomes available to the fat commands, i.e. fatls. 16803f85ce27Swdenk 1681ecb0ccd9SWolfgang Denk- TFTP Fixed UDP Port: 1682ecb0ccd9SWolfgang Denk CONFIG_TFTP_PORT 1683ecb0ccd9SWolfgang Denk 168428cb9375SWolfgang Denk If this is defined, the environment variable tftpsrcp 1685ecb0ccd9SWolfgang Denk is used to supply the TFTP UDP source port value. 168628cb9375SWolfgang Denk If tftpsrcp isn't defined, the normal pseudo-random port 1687ecb0ccd9SWolfgang Denk number generator is used. 1688ecb0ccd9SWolfgang Denk 168928cb9375SWolfgang Denk Also, the environment variable tftpdstp is used to supply 169028cb9375SWolfgang Denk the TFTP UDP destination port value. If tftpdstp isn't 169128cb9375SWolfgang Denk defined, the normal port 69 is used. 169228cb9375SWolfgang Denk 169328cb9375SWolfgang Denk The purpose for tftpsrcp is to allow a TFTP server to 1694ecb0ccd9SWolfgang Denk blindly start the TFTP transfer using the pre-configured 1695ecb0ccd9SWolfgang Denk target IP address and UDP port. This has the effect of 1696ecb0ccd9SWolfgang Denk "punching through" the (Windows XP) firewall, allowing 1697ecb0ccd9SWolfgang Denk the remainder of the TFTP transfer to proceed normally. 1698ecb0ccd9SWolfgang Denk A better solution is to properly configure the firewall, 1699ecb0ccd9SWolfgang Denk but sometimes that is not allowed. 1700ecb0ccd9SWolfgang Denk 1701a8c7c708Swdenk- Show boot progress: 1702c609719bSwdenk CONFIG_SHOW_BOOT_PROGRESS 1703c609719bSwdenk 1704c609719bSwdenk Defining this option allows to add some board- 1705c609719bSwdenk specific code (calling a user-provided function 1706c609719bSwdenk "show_boot_progress(int)") that enables you to show 1707c609719bSwdenk the system's boot progress on some display (for 1708c609719bSwdenk example, some LED's) on your board. At the moment, 1709c609719bSwdenk the following checkpoints are implemented: 1710c609719bSwdenk 17111372cce2SMarian BalakowiczLegacy uImage format: 17121372cce2SMarian Balakowicz 1713c609719bSwdenk Arg Where When 1714c609719bSwdenk 1 common/cmd_bootm.c before attempting to boot an image 1715c609719bSwdenk -1 common/cmd_bootm.c Image header has bad magic number 1716c609719bSwdenk 2 common/cmd_bootm.c Image header has correct magic number 1717c609719bSwdenk -2 common/cmd_bootm.c Image header has bad checksum 1718c609719bSwdenk 3 common/cmd_bootm.c Image header has correct checksum 1719c609719bSwdenk -3 common/cmd_bootm.c Image data has bad checksum 1720c609719bSwdenk 4 common/cmd_bootm.c Image data has correct checksum 1721c609719bSwdenk -4 common/cmd_bootm.c Image is for unsupported architecture 1722c609719bSwdenk 5 common/cmd_bootm.c Architecture check OK 17231372cce2SMarian Balakowicz -5 common/cmd_bootm.c Wrong Image Type (not kernel, multi) 1724c609719bSwdenk 6 common/cmd_bootm.c Image Type check OK 1725c609719bSwdenk -6 common/cmd_bootm.c gunzip uncompression error 1726c609719bSwdenk -7 common/cmd_bootm.c Unimplemented compression type 1727c609719bSwdenk 7 common/cmd_bootm.c Uncompression OK 17281372cce2SMarian Balakowicz 8 common/cmd_bootm.c No uncompress/copy overwrite error 1729c609719bSwdenk -9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX) 17301372cce2SMarian Balakowicz 17311372cce2SMarian Balakowicz 9 common/image.c Start initial ramdisk verification 17321372cce2SMarian Balakowicz -10 common/image.c Ramdisk header has bad magic number 17331372cce2SMarian Balakowicz -11 common/image.c Ramdisk header has bad checksum 17341372cce2SMarian Balakowicz 10 common/image.c Ramdisk header is OK 17351372cce2SMarian Balakowicz -12 common/image.c Ramdisk data has bad checksum 17361372cce2SMarian Balakowicz 11 common/image.c Ramdisk data has correct checksum 17371372cce2SMarian Balakowicz 12 common/image.c Ramdisk verification complete, start loading 173811ccc33fSMarcel Ziswiler -13 common/image.c Wrong Image Type (not PPC Linux ramdisk) 17391372cce2SMarian Balakowicz 13 common/image.c Start multifile image verification 17401372cce2SMarian Balakowicz 14 common/image.c No initial ramdisk, no multifile, continue. 17411372cce2SMarian Balakowicz 17421372cce2SMarian Balakowicz 15 lib_<arch>/bootm.c All preparation done, transferring control to OS 1743c609719bSwdenk 174463e73c9aSwdenk -30 lib_ppc/board.c Fatal error, hang the system 174563e73c9aSwdenk -31 post/post.c POST test failed, detected by post_output_backlog() 174663e73c9aSwdenk -32 post/post.c POST test failed, detected by post_run_single() 174763e73c9aSwdenk 1748566a494fSHeiko Schocher 34 common/cmd_doc.c before loading a Image from a DOC device 1749566a494fSHeiko Schocher -35 common/cmd_doc.c Bad usage of "doc" command 1750566a494fSHeiko Schocher 35 common/cmd_doc.c correct usage of "doc" command 1751566a494fSHeiko Schocher -36 common/cmd_doc.c No boot device 1752566a494fSHeiko Schocher 36 common/cmd_doc.c correct boot device 1753566a494fSHeiko Schocher -37 common/cmd_doc.c Unknown Chip ID on boot device 1754566a494fSHeiko Schocher 37 common/cmd_doc.c correct chip ID found, device available 1755566a494fSHeiko Schocher -38 common/cmd_doc.c Read Error on boot device 1756566a494fSHeiko Schocher 38 common/cmd_doc.c reading Image header from DOC device OK 1757566a494fSHeiko Schocher -39 common/cmd_doc.c Image header has bad magic number 1758566a494fSHeiko Schocher 39 common/cmd_doc.c Image header has correct magic number 1759566a494fSHeiko Schocher -40 common/cmd_doc.c Error reading Image from DOC device 1760566a494fSHeiko Schocher 40 common/cmd_doc.c Image header has correct magic number 1761566a494fSHeiko Schocher 41 common/cmd_ide.c before loading a Image from a IDE device 1762566a494fSHeiko Schocher -42 common/cmd_ide.c Bad usage of "ide" command 1763566a494fSHeiko Schocher 42 common/cmd_ide.c correct usage of "ide" command 1764566a494fSHeiko Schocher -43 common/cmd_ide.c No boot device 1765566a494fSHeiko Schocher 43 common/cmd_ide.c boot device found 1766566a494fSHeiko Schocher -44 common/cmd_ide.c Device not available 1767566a494fSHeiko Schocher 44 common/cmd_ide.c Device available 1768566a494fSHeiko Schocher -45 common/cmd_ide.c wrong partition selected 1769566a494fSHeiko Schocher 45 common/cmd_ide.c partition selected 1770566a494fSHeiko Schocher -46 common/cmd_ide.c Unknown partition table 1771566a494fSHeiko Schocher 46 common/cmd_ide.c valid partition table found 1772566a494fSHeiko Schocher -47 common/cmd_ide.c Invalid partition type 1773566a494fSHeiko Schocher 47 common/cmd_ide.c correct partition type 1774566a494fSHeiko Schocher -48 common/cmd_ide.c Error reading Image Header on boot device 1775566a494fSHeiko Schocher 48 common/cmd_ide.c reading Image Header from IDE device OK 1776566a494fSHeiko Schocher -49 common/cmd_ide.c Image header has bad magic number 1777566a494fSHeiko Schocher 49 common/cmd_ide.c Image header has correct magic number 1778566a494fSHeiko Schocher -50 common/cmd_ide.c Image header has bad checksum 1779566a494fSHeiko Schocher 50 common/cmd_ide.c Image header has correct checksum 1780566a494fSHeiko Schocher -51 common/cmd_ide.c Error reading Image from IDE device 1781566a494fSHeiko Schocher 51 common/cmd_ide.c reading Image from IDE device OK 1782566a494fSHeiko Schocher 52 common/cmd_nand.c before loading a Image from a NAND device 1783566a494fSHeiko Schocher -53 common/cmd_nand.c Bad usage of "nand" command 1784566a494fSHeiko Schocher 53 common/cmd_nand.c correct usage of "nand" command 1785566a494fSHeiko Schocher -54 common/cmd_nand.c No boot device 1786566a494fSHeiko Schocher 54 common/cmd_nand.c boot device found 1787566a494fSHeiko Schocher -55 common/cmd_nand.c Unknown Chip ID on boot device 1788566a494fSHeiko Schocher 55 common/cmd_nand.c correct chip ID found, device available 1789566a494fSHeiko Schocher -56 common/cmd_nand.c Error reading Image Header on boot device 1790566a494fSHeiko Schocher 56 common/cmd_nand.c reading Image Header from NAND device OK 1791566a494fSHeiko Schocher -57 common/cmd_nand.c Image header has bad magic number 1792566a494fSHeiko Schocher 57 common/cmd_nand.c Image header has correct magic number 1793566a494fSHeiko Schocher -58 common/cmd_nand.c Error reading Image from NAND device 1794566a494fSHeiko Schocher 58 common/cmd_nand.c reading Image from NAND device OK 1795c609719bSwdenk 1796566a494fSHeiko Schocher -60 common/env_common.c Environment has a bad CRC, using default 1797c609719bSwdenk 1798566a494fSHeiko Schocher 64 net/eth.c starting with Ethernet configuration. 1799566a494fSHeiko Schocher -64 net/eth.c no Ethernet found. 1800566a494fSHeiko Schocher 65 net/eth.c Ethernet found. 1801206c60cbSwdenk 1802566a494fSHeiko Schocher -80 common/cmd_net.c usage wrong 1803566a494fSHeiko Schocher 80 common/cmd_net.c before calling NetLoop() 180411ccc33fSMarcel Ziswiler -81 common/cmd_net.c some error in NetLoop() occurred 1805566a494fSHeiko Schocher 81 common/cmd_net.c NetLoop() back without error 1806566a494fSHeiko Schocher -82 common/cmd_net.c size == 0 (File with size 0 loaded) 1807566a494fSHeiko Schocher 82 common/cmd_net.c trying automatic boot 1808566a494fSHeiko Schocher 83 common/cmd_net.c running autoscript 1809566a494fSHeiko Schocher -83 common/cmd_net.c some error in automatic boot or autoscript 1810566a494fSHeiko Schocher 84 common/cmd_net.c end without errors 1811c609719bSwdenk 18121372cce2SMarian BalakowiczFIT uImage format: 18131372cce2SMarian Balakowicz 18141372cce2SMarian Balakowicz Arg Where When 18151372cce2SMarian Balakowicz 100 common/cmd_bootm.c Kernel FIT Image has correct format 18161372cce2SMarian Balakowicz -100 common/cmd_bootm.c Kernel FIT Image has incorrect format 18171372cce2SMarian Balakowicz 101 common/cmd_bootm.c No Kernel subimage unit name, using configuration 18181372cce2SMarian Balakowicz -101 common/cmd_bootm.c Can't get configuration for kernel subimage 18191372cce2SMarian Balakowicz 102 common/cmd_bootm.c Kernel unit name specified 18201372cce2SMarian Balakowicz -103 common/cmd_bootm.c Can't get kernel subimage node offset 1821f773bea8SMarian Balakowicz 103 common/cmd_bootm.c Found configuration node 18221372cce2SMarian Balakowicz 104 common/cmd_bootm.c Got kernel subimage node offset 18231372cce2SMarian Balakowicz -104 common/cmd_bootm.c Kernel subimage hash verification failed 18241372cce2SMarian Balakowicz 105 common/cmd_bootm.c Kernel subimage hash verification OK 18251372cce2SMarian Balakowicz -105 common/cmd_bootm.c Kernel subimage is for unsupported architecture 18261372cce2SMarian Balakowicz 106 common/cmd_bootm.c Architecture check OK 182711ccc33fSMarcel Ziswiler -106 common/cmd_bootm.c Kernel subimage has wrong type 182811ccc33fSMarcel Ziswiler 107 common/cmd_bootm.c Kernel subimage type OK 18291372cce2SMarian Balakowicz -107 common/cmd_bootm.c Can't get kernel subimage data/size 18301372cce2SMarian Balakowicz 108 common/cmd_bootm.c Got kernel subimage data/size 18311372cce2SMarian Balakowicz -108 common/cmd_bootm.c Wrong image type (not legacy, FIT) 18321372cce2SMarian Balakowicz -109 common/cmd_bootm.c Can't get kernel subimage type 18331372cce2SMarian Balakowicz -110 common/cmd_bootm.c Can't get kernel subimage comp 18341372cce2SMarian Balakowicz -111 common/cmd_bootm.c Can't get kernel subimage os 18351372cce2SMarian Balakowicz -112 common/cmd_bootm.c Can't get kernel subimage load address 18361372cce2SMarian Balakowicz -113 common/cmd_bootm.c Image uncompress/copy overwrite error 18371372cce2SMarian Balakowicz 18381372cce2SMarian Balakowicz 120 common/image.c Start initial ramdisk verification 18391372cce2SMarian Balakowicz -120 common/image.c Ramdisk FIT image has incorrect format 18401372cce2SMarian Balakowicz 121 common/image.c Ramdisk FIT image has correct format 184111ccc33fSMarcel Ziswiler 122 common/image.c No ramdisk subimage unit name, using configuration 18421372cce2SMarian Balakowicz -122 common/image.c Can't get configuration for ramdisk subimage 18431372cce2SMarian Balakowicz 123 common/image.c Ramdisk unit name specified 18441372cce2SMarian Balakowicz -124 common/image.c Can't get ramdisk subimage node offset 18451372cce2SMarian Balakowicz 125 common/image.c Got ramdisk subimage node offset 18461372cce2SMarian Balakowicz -125 common/image.c Ramdisk subimage hash verification failed 18471372cce2SMarian Balakowicz 126 common/image.c Ramdisk subimage hash verification OK 18481372cce2SMarian Balakowicz -126 common/image.c Ramdisk subimage for unsupported architecture 18491372cce2SMarian Balakowicz 127 common/image.c Architecture check OK 18501372cce2SMarian Balakowicz -127 common/image.c Can't get ramdisk subimage data/size 18511372cce2SMarian Balakowicz 128 common/image.c Got ramdisk subimage data/size 18521372cce2SMarian Balakowicz 129 common/image.c Can't get ramdisk load address 18531372cce2SMarian Balakowicz -129 common/image.c Got ramdisk load address 18541372cce2SMarian Balakowicz 185511ccc33fSMarcel Ziswiler -130 common/cmd_doc.c Incorrect FIT image format 18561372cce2SMarian Balakowicz 131 common/cmd_doc.c FIT image format OK 18571372cce2SMarian Balakowicz 185811ccc33fSMarcel Ziswiler -140 common/cmd_ide.c Incorrect FIT image format 18591372cce2SMarian Balakowicz 141 common/cmd_ide.c FIT image format OK 18601372cce2SMarian Balakowicz 186111ccc33fSMarcel Ziswiler -150 common/cmd_nand.c Incorrect FIT image format 18621372cce2SMarian Balakowicz 151 common/cmd_nand.c FIT image format OK 18631372cce2SMarian Balakowicz 18641372cce2SMarian Balakowicz 1865c609719bSwdenkModem Support: 1866c609719bSwdenk-------------- 1867c609719bSwdenk 186885ec0bccSwdenk[so far only for SMDK2400 and TRAB boards] 1869c609719bSwdenk 187011ccc33fSMarcel Ziswiler- Modem support enable: 1871c609719bSwdenk CONFIG_MODEM_SUPPORT 1872c609719bSwdenk 1873c609719bSwdenk- RTS/CTS Flow control enable: 1874c609719bSwdenk CONFIG_HWFLOW 1875c609719bSwdenk 1876c609719bSwdenk- Modem debug support: 1877c609719bSwdenk CONFIG_MODEM_SUPPORT_DEBUG 1878c609719bSwdenk 1879c609719bSwdenk Enables debugging stuff (char screen[1024], dbg()) 1880c609719bSwdenk for modem support. Useful only with BDI2000. 1881c609719bSwdenk 1882a8c7c708Swdenk- Interrupt support (PPC): 1883a8c7c708Swdenk 1884a8c7c708Swdenk There are common interrupt_init() and timer_interrupt() 1885a8c7c708Swdenk for all PPC archs. interrupt_init() calls interrupt_init_cpu() 188611ccc33fSMarcel Ziswiler for CPU specific initialization. interrupt_init_cpu() 1887a8c7c708Swdenk should set decrementer_count to appropriate value. If 188811ccc33fSMarcel Ziswiler CPU resets decrementer automatically after interrupt 1889a8c7c708Swdenk (ppc4xx) it should set decrementer_count to zero. 189011ccc33fSMarcel Ziswiler timer_interrupt() calls timer_interrupt_cpu() for CPU 1891a8c7c708Swdenk specific handling. If board has watchdog / status_led 1892a8c7c708Swdenk / other_activity_monitor it works automatically from 1893a8c7c708Swdenk general timer_interrupt(). 1894a8c7c708Swdenk 1895c609719bSwdenk- General: 1896c609719bSwdenk 1897c609719bSwdenk In the target system modem support is enabled when a 1898c609719bSwdenk specific key (key combination) is pressed during 1899c609719bSwdenk power-on. Otherwise U-Boot will boot normally 190011ccc33fSMarcel Ziswiler (autoboot). The key_pressed() function is called from 1901c609719bSwdenk board_init(). Currently key_pressed() is a dummy 1902c609719bSwdenk function, returning 1 and thus enabling modem 1903c609719bSwdenk initialization. 1904c609719bSwdenk 1905c609719bSwdenk If there are no modem init strings in the 1906c609719bSwdenk environment, U-Boot proceed to autoboot; the 1907c609719bSwdenk previous output (banner, info printfs) will be 190811ccc33fSMarcel Ziswiler suppressed, though. 1909c609719bSwdenk 1910c609719bSwdenk See also: doc/README.Modem 1911c609719bSwdenk 1912c609719bSwdenk 1913c609719bSwdenkConfiguration Settings: 1914c609719bSwdenk----------------------- 1915c609719bSwdenk 1916c609719bSwdenk- CFG_LONGHELP: Defined when you want long help messages included; 1917c609719bSwdenk undefine this when you're short of memory. 1918c609719bSwdenk 1919c609719bSwdenk- CFG_PROMPT: This is what U-Boot prints on the console to 1920c609719bSwdenk prompt for user input. 1921c609719bSwdenk 1922c609719bSwdenk- CFG_CBSIZE: Buffer size for input from the Console 1923c609719bSwdenk 1924c609719bSwdenk- CFG_PBSIZE: Buffer size for Console output 1925c609719bSwdenk 1926c609719bSwdenk- CFG_MAXARGS: max. Number of arguments accepted for monitor commands 1927c609719bSwdenk 1928c609719bSwdenk- CFG_BARGSIZE: Buffer size for Boot Arguments which are passed to 1929c609719bSwdenk the application (usually a Linux kernel) when it is 1930c609719bSwdenk booted 1931c609719bSwdenk 1932c609719bSwdenk- CFG_BAUDRATE_TABLE: 1933c609719bSwdenk List of legal baudrate settings for this board. 1934c609719bSwdenk 1935c609719bSwdenk- CFG_CONSOLE_INFO_QUIET 1936c609719bSwdenk Suppress display of console information at boot. 1937c609719bSwdenk 1938c609719bSwdenk- CFG_CONSOLE_IS_IN_ENV 1939c609719bSwdenk If the board specific function 1940c609719bSwdenk extern int overwrite_console (void); 1941c609719bSwdenk returns 1, the stdin, stderr and stdout are switched to the 1942c609719bSwdenk serial port, else the settings in the environment are used. 1943c609719bSwdenk 1944c609719bSwdenk- CFG_CONSOLE_OVERWRITE_ROUTINE 1945c609719bSwdenk Enable the call to overwrite_console(). 1946c609719bSwdenk 1947c609719bSwdenk- CFG_CONSOLE_ENV_OVERWRITE 1948c609719bSwdenk Enable overwrite of previous console environment settings. 1949c609719bSwdenk 1950c609719bSwdenk- CFG_MEMTEST_START, CFG_MEMTEST_END: 1951c609719bSwdenk Begin and End addresses of the area used by the 1952c609719bSwdenk simple memory test. 1953c609719bSwdenk 1954c609719bSwdenk- CFG_ALT_MEMTEST: 1955c609719bSwdenk Enable an alternate, more extensive memory test. 1956c609719bSwdenk 19575f535fe1Swdenk- CFG_MEMTEST_SCRATCH: 19585f535fe1Swdenk Scratch address used by the alternate memory test 19595f535fe1Swdenk You only need to set this if address zero isn't writeable 19605f535fe1Swdenk 196114f73ca6SStefan Roese- CFG_MEM_TOP_HIDE (PPC only): 196214f73ca6SStefan Roese If CFG_MEM_TOP_HIDE is defined in the board config header, 196314f73ca6SStefan Roese this specified memory area will get subtracted from the top 196411ccc33fSMarcel Ziswiler (end) of RAM and won't get "touched" at all by U-Boot. By 196514f73ca6SStefan Roese fixing up gd->ram_size the Linux kernel should gets passed 196614f73ca6SStefan Roese the now "corrected" memory size and won't touch it either. 196714f73ca6SStefan Roese This should work for arch/ppc and arch/powerpc. Only Linux 19685e12e75dSStefan Roese board ports in arch/powerpc with bootwrapper support that 196914f73ca6SStefan Roese recalculate the memory size from the SDRAM controller setup 19705e12e75dSStefan Roese will have to get fixed in Linux additionally. 197114f73ca6SStefan Roese 197214f73ca6SStefan Roese This option can be used as a workaround for the 440EPx/GRx 197314f73ca6SStefan Roese CHIP 11 errata where the last 256 bytes in SDRAM shouldn't 197414f73ca6SStefan Roese be touched. 197514f73ca6SStefan Roese 197614f73ca6SStefan Roese WARNING: Please make sure that this value is a multiple of 197714f73ca6SStefan Roese the Linux page size (normally 4k). If this is not the case, 197814f73ca6SStefan Roese then the end address of the Linux memory will be located at a 197914f73ca6SStefan Roese non page size aligned address and this could cause major 198014f73ca6SStefan Roese problems. 198114f73ca6SStefan Roese 1982c609719bSwdenk- CFG_TFTP_LOADADDR: 1983c609719bSwdenk Default load address for network file downloads 1984c609719bSwdenk 1985c609719bSwdenk- CFG_LOADS_BAUD_CHANGE: 1986c609719bSwdenk Enable temporary baudrate change while serial download 1987c609719bSwdenk 1988c609719bSwdenk- CFG_SDRAM_BASE: 1989c609719bSwdenk Physical start address of SDRAM. _Must_ be 0 here. 1990c609719bSwdenk 1991c609719bSwdenk- CFG_MBIO_BASE: 1992c609719bSwdenk Physical start address of Motherboard I/O (if using a 1993c609719bSwdenk Cogent motherboard) 1994c609719bSwdenk 1995c609719bSwdenk- CFG_FLASH_BASE: 1996c609719bSwdenk Physical start address of Flash memory. 1997c609719bSwdenk 1998c609719bSwdenk- CFG_MONITOR_BASE: 1999c609719bSwdenk Physical start address of boot monitor code (set by 2000c609719bSwdenk make config files to be same as the text base address 2001c609719bSwdenk (TEXT_BASE) used when linking) - same as 2002c609719bSwdenk CFG_FLASH_BASE when booting from flash. 2003c609719bSwdenk 2004c609719bSwdenk- CFG_MONITOR_LEN: 20053b57fe0aSwdenk Size of memory reserved for monitor code, used to 20063b57fe0aSwdenk determine _at_compile_time_ (!) if the environment is 20073b57fe0aSwdenk embedded within the U-Boot image, or in a separate 20083b57fe0aSwdenk flash sector. 2009c609719bSwdenk 2010c609719bSwdenk- CFG_MALLOC_LEN: 2011c609719bSwdenk Size of DRAM reserved for malloc() use. 2012c609719bSwdenk 201315940c9aSStefan Roese- CFG_BOOTM_LEN: 201415940c9aSStefan Roese Normally compressed uImages are limited to an 201515940c9aSStefan Roese uncompressed size of 8 MBytes. If this is not enough, 201615940c9aSStefan Roese you can define CFG_BOOTM_LEN in your board config file 201715940c9aSStefan Roese to adjust this setting to your needs. 2018c609719bSwdenk 2019c609719bSwdenk- CFG_BOOTMAPSZ: 2020c609719bSwdenk Maximum size of memory mapped by the startup code of 2021c609719bSwdenk the Linux kernel; all data that must be processed by 20227d721e34SBartlomiej Sieka the Linux kernel (bd_info, boot arguments, FDT blob if 20237d721e34SBartlomiej Sieka used) must be put below this limit, unless "bootm_low" 20247d721e34SBartlomiej Sieka enviroment variable is defined and non-zero. In such case 20257d721e34SBartlomiej Sieka all data for the Linux kernel must be between "bootm_low" 20267d721e34SBartlomiej Sieka and "bootm_low" + CFG_BOOTMAPSZ. 2027c609719bSwdenk 2028c609719bSwdenk- CFG_MAX_FLASH_BANKS: 2029c609719bSwdenk Max number of Flash memory banks 2030c609719bSwdenk 2031c609719bSwdenk- CFG_MAX_FLASH_SECT: 2032c609719bSwdenk Max number of sectors on a Flash chip 2033c609719bSwdenk 2034c609719bSwdenk- CFG_FLASH_ERASE_TOUT: 2035c609719bSwdenk Timeout for Flash erase operations (in ms) 2036c609719bSwdenk 2037c609719bSwdenk- CFG_FLASH_WRITE_TOUT: 2038c609719bSwdenk Timeout for Flash write operations (in ms) 2039c609719bSwdenk 20408564acf9Swdenk- CFG_FLASH_LOCK_TOUT 20418564acf9Swdenk Timeout for Flash set sector lock bit operation (in ms) 20428564acf9Swdenk 20438564acf9Swdenk- CFG_FLASH_UNLOCK_TOUT 20448564acf9Swdenk Timeout for Flash clear lock bits operation (in ms) 20458564acf9Swdenk 20468564acf9Swdenk- CFG_FLASH_PROTECTION 20478564acf9Swdenk If defined, hardware flash sectors protection is used 20488564acf9Swdenk instead of U-Boot software protection. 20498564acf9Swdenk 2050c609719bSwdenk- CFG_DIRECT_FLASH_TFTP: 2051c609719bSwdenk 2052c609719bSwdenk Enable TFTP transfers directly to flash memory; 2053c609719bSwdenk without this option such a download has to be 2054c609719bSwdenk performed in two steps: (1) download to RAM, and (2) 2055c609719bSwdenk copy from RAM to flash. 2056c609719bSwdenk 2057c609719bSwdenk The two-step approach is usually more reliable, since 2058c609719bSwdenk you can check if the download worked before you erase 205911ccc33fSMarcel Ziswiler the flash, but in some situations (when system RAM is 206011ccc33fSMarcel Ziswiler too limited to allow for a temporary copy of the 2061c609719bSwdenk downloaded image) this option may be very useful. 2062c609719bSwdenk 2063c609719bSwdenk- CFG_FLASH_CFI: 2064c609719bSwdenk Define if the flash driver uses extra elements in the 20655653fc33Swdenk common flash structure for storing flash geometry. 20665653fc33Swdenk 2067*00b1883aSJean-Christophe PLAGNIOL-VILLARD- CONFIG_FLASH_CFI_DRIVER 20685653fc33Swdenk This option also enables the building of the cfi_flash driver 20695653fc33Swdenk in the drivers directory 207053cf9435Sstroese 207196ef831fSGuennadi Liakhovetski- CFG_FLASH_USE_BUFFER_WRITE 207296ef831fSGuennadi Liakhovetski Use buffered writes to flash. 207396ef831fSGuennadi Liakhovetski 207496ef831fSGuennadi Liakhovetski- CONFIG_FLASH_SPANSION_S29WS_N 207596ef831fSGuennadi Liakhovetski s29ws-n MirrorBit flash has non-standard addresses for buffered 207696ef831fSGuennadi Liakhovetski write commands. 207796ef831fSGuennadi Liakhovetski 20785568e613SStefan Roese- CFG_FLASH_QUIET_TEST 20795568e613SStefan Roese If this option is defined, the common CFI flash doesn't 20805568e613SStefan Roese print it's warning upon not recognized FLASH banks. This 20815568e613SStefan Roese is useful, if some of the configured banks are only 20825568e613SStefan Roese optionally available. 20835568e613SStefan Roese 20849a042e9cSJerry Van Baren- CONFIG_FLASH_SHOW_PROGRESS 20859a042e9cSJerry Van Baren If defined (must be an integer), print out countdown 20869a042e9cSJerry Van Baren digits and dots. Recommended value: 45 (9..1) for 80 20879a042e9cSJerry Van Baren column displays, 15 (3..1) for 40 column displays. 20889a042e9cSJerry Van Baren 208953cf9435Sstroese- CFG_RX_ETH_BUFFER: 209011ccc33fSMarcel Ziswiler Defines the number of Ethernet receive buffers. On some 209111ccc33fSMarcel Ziswiler Ethernet controllers it is recommended to set this value 209253cf9435Sstroese to 8 or even higher (EEPRO100 or 405 EMAC), since all 209353cf9435Sstroese buffers can be full shortly after enabling the interface 209411ccc33fSMarcel Ziswiler on high Ethernet traffic. 209553cf9435Sstroese Defaults to 4 if not defined. 2096c609719bSwdenk 2097c609719bSwdenkThe following definitions that deal with the placement and management 2098c609719bSwdenkof environment data (variable area); in general, we support the 2099c609719bSwdenkfollowing configurations: 2100c609719bSwdenk 2101c609719bSwdenk- CFG_ENV_IS_IN_FLASH: 2102c609719bSwdenk 2103c609719bSwdenk Define this if the environment is in flash memory. 2104c609719bSwdenk 2105c609719bSwdenk a) The environment occupies one whole flash sector, which is 2106c609719bSwdenk "embedded" in the text segment with the U-Boot code. This 2107c609719bSwdenk happens usually with "bottom boot sector" or "top boot 2108c609719bSwdenk sector" type flash chips, which have several smaller 2109c609719bSwdenk sectors at the start or the end. For instance, such a 2110c609719bSwdenk layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In 2111c609719bSwdenk such a case you would place the environment in one of the 2112c609719bSwdenk 4 kB sectors - with U-Boot code before and after it. With 2113c609719bSwdenk "top boot sector" type flash chips, you would put the 2114c609719bSwdenk environment in one of the last sectors, leaving a gap 2115c609719bSwdenk between U-Boot and the environment. 2116c609719bSwdenk 2117c609719bSwdenk - CFG_ENV_OFFSET: 2118c609719bSwdenk 2119c609719bSwdenk Offset of environment data (variable area) to the 2120c609719bSwdenk beginning of flash memory; for instance, with bottom boot 2121c609719bSwdenk type flash chips the second sector can be used: the offset 2122c609719bSwdenk for this sector is given here. 2123c609719bSwdenk 2124c609719bSwdenk CFG_ENV_OFFSET is used relative to CFG_FLASH_BASE. 2125c609719bSwdenk 2126c609719bSwdenk - CFG_ENV_ADDR: 2127c609719bSwdenk 2128c609719bSwdenk This is just another way to specify the start address of 2129c609719bSwdenk the flash sector containing the environment (instead of 2130c609719bSwdenk CFG_ENV_OFFSET). 2131c609719bSwdenk 2132c609719bSwdenk - CFG_ENV_SECT_SIZE: 2133c609719bSwdenk 2134c609719bSwdenk Size of the sector containing the environment. 2135c609719bSwdenk 2136c609719bSwdenk 2137c609719bSwdenk b) Sometimes flash chips have few, equal sized, BIG sectors. 2138c609719bSwdenk In such a case you don't want to spend a whole sector for 2139c609719bSwdenk the environment. 2140c609719bSwdenk 2141c609719bSwdenk - CFG_ENV_SIZE: 2142c609719bSwdenk 2143c609719bSwdenk If you use this in combination with CFG_ENV_IS_IN_FLASH 2144c609719bSwdenk and CFG_ENV_SECT_SIZE, you can specify to use only a part 2145c609719bSwdenk of this flash sector for the environment. This saves 2146c609719bSwdenk memory for the RAM copy of the environment. 2147c609719bSwdenk 2148c609719bSwdenk It may also save flash memory if you decide to use this 2149c609719bSwdenk when your environment is "embedded" within U-Boot code, 2150c609719bSwdenk since then the remainder of the flash sector could be used 2151c609719bSwdenk for U-Boot code. It should be pointed out that this is 2152c609719bSwdenk STRONGLY DISCOURAGED from a robustness point of view: 2153c609719bSwdenk updating the environment in flash makes it always 2154c609719bSwdenk necessary to erase the WHOLE sector. If something goes 2155c609719bSwdenk wrong before the contents has been restored from a copy in 2156c609719bSwdenk RAM, your target system will be dead. 2157c609719bSwdenk 2158c609719bSwdenk - CFG_ENV_ADDR_REDUND 2159c609719bSwdenk CFG_ENV_SIZE_REDUND 2160c609719bSwdenk 2161c609719bSwdenk These settings describe a second storage area used to hold 216211ccc33fSMarcel Ziswiler a redundant copy of the environment data, so that there is 21633e38691eSwdenk a valid backup copy in case there is a power failure during 2164c609719bSwdenk a "saveenv" operation. 2165c609719bSwdenk 2166c609719bSwdenkBE CAREFUL! Any changes to the flash layout, and some changes to the 2167c609719bSwdenksource code will make it necessary to adapt <board>/u-boot.lds* 2168c609719bSwdenkaccordingly! 2169c609719bSwdenk 2170c609719bSwdenk 2171c609719bSwdenk- CFG_ENV_IS_IN_NVRAM: 2172c609719bSwdenk 2173c609719bSwdenk Define this if you have some non-volatile memory device 2174c609719bSwdenk (NVRAM, battery buffered SRAM) which you want to use for the 2175c609719bSwdenk environment. 2176c609719bSwdenk 2177c609719bSwdenk - CFG_ENV_ADDR: 2178c609719bSwdenk - CFG_ENV_SIZE: 2179c609719bSwdenk 218011ccc33fSMarcel Ziswiler These two #defines are used to determine the memory area you 2181c609719bSwdenk want to use for environment. It is assumed that this memory 2182c609719bSwdenk can just be read and written to, without any special 2183c609719bSwdenk provision. 2184c609719bSwdenk 2185c609719bSwdenkBE CAREFUL! The first access to the environment happens quite early 2186c609719bSwdenkin U-Boot initalization (when we try to get the setting of for the 218711ccc33fSMarcel Ziswilerconsole baudrate). You *MUST* have mapped your NVRAM area then, or 2188c609719bSwdenkU-Boot will hang. 2189c609719bSwdenk 2190c609719bSwdenkPlease note that even with NVRAM we still use a copy of the 2191c609719bSwdenkenvironment in RAM: we could work on NVRAM directly, but we want to 2192c609719bSwdenkkeep settings there always unmodified except somebody uses "saveenv" 2193c609719bSwdenkto save the current settings. 2194c609719bSwdenk 2195c609719bSwdenk 2196c609719bSwdenk- CFG_ENV_IS_IN_EEPROM: 2197c609719bSwdenk 2198c609719bSwdenk Use this if you have an EEPROM or similar serial access 2199c609719bSwdenk device and a driver for it. 2200c609719bSwdenk 2201c609719bSwdenk - CFG_ENV_OFFSET: 2202c609719bSwdenk - CFG_ENV_SIZE: 2203c609719bSwdenk 2204c609719bSwdenk These two #defines specify the offset and size of the 2205c609719bSwdenk environment area within the total memory of your EEPROM. 2206c609719bSwdenk 2207c609719bSwdenk - CFG_I2C_EEPROM_ADDR: 2208c609719bSwdenk If defined, specified the chip address of the EEPROM device. 2209c609719bSwdenk The default address is zero. 2210c609719bSwdenk 2211c609719bSwdenk - CFG_EEPROM_PAGE_WRITE_BITS: 2212c609719bSwdenk If defined, the number of bits used to address bytes in a 2213c609719bSwdenk single page in the EEPROM device. A 64 byte page, for example 2214c609719bSwdenk would require six bits. 2215c609719bSwdenk 2216c609719bSwdenk - CFG_EEPROM_PAGE_WRITE_DELAY_MS: 2217c609719bSwdenk If defined, the number of milliseconds to delay between 2218c609719bSwdenk page writes. The default is zero milliseconds. 2219c609719bSwdenk 2220c609719bSwdenk - CFG_I2C_EEPROM_ADDR_LEN: 2221c609719bSwdenk The length in bytes of the EEPROM memory array address. Note 2222c609719bSwdenk that this is NOT the chip address length! 2223c609719bSwdenk 22245cf91d6bSwdenk - CFG_I2C_EEPROM_ADDR_OVERFLOW: 22255cf91d6bSwdenk EEPROM chips that implement "address overflow" are ones 22265cf91d6bSwdenk like Catalyst 24WC04/08/16 which has 9/10/11 bits of 22275cf91d6bSwdenk address and the extra bits end up in the "chip address" bit 22285cf91d6bSwdenk slots. This makes a 24WC08 (1Kbyte) chip look like four 256 22295cf91d6bSwdenk byte chips. 22305cf91d6bSwdenk 22315cf91d6bSwdenk Note that we consider the length of the address field to 22325cf91d6bSwdenk still be one byte because the extra address bits are hidden 22335cf91d6bSwdenk in the chip address. 22345cf91d6bSwdenk 2235c609719bSwdenk - CFG_EEPROM_SIZE: 2236c609719bSwdenk The size in bytes of the EEPROM device. 2237c609719bSwdenk 2238c609719bSwdenk 22395779d8d9Swdenk- CFG_ENV_IS_IN_DATAFLASH: 22405779d8d9Swdenk 22415779d8d9Swdenk Define this if you have a DataFlash memory device which you 22425779d8d9Swdenk want to use for the environment. 22435779d8d9Swdenk 22445779d8d9Swdenk - CFG_ENV_OFFSET: 22455779d8d9Swdenk - CFG_ENV_ADDR: 22465779d8d9Swdenk - CFG_ENV_SIZE: 22475779d8d9Swdenk 22485779d8d9Swdenk These three #defines specify the offset and size of the 22495779d8d9Swdenk environment area within the total memory of your DataFlash placed 22505779d8d9Swdenk at the specified address. 22515779d8d9Swdenk 225213a5695bSwdenk- CFG_ENV_IS_IN_NAND: 225313a5695bSwdenk 225413a5695bSwdenk Define this if you have a NAND device which you want to use 225513a5695bSwdenk for the environment. 225613a5695bSwdenk 225713a5695bSwdenk - CFG_ENV_OFFSET: 225813a5695bSwdenk - CFG_ENV_SIZE: 225913a5695bSwdenk 226013a5695bSwdenk These two #defines specify the offset and size of the environment 226113a5695bSwdenk area within the first NAND device. 22625779d8d9Swdenk 2263e443c944SMarkus Klotzbuecher - CFG_ENV_OFFSET_REDUND 2264e443c944SMarkus Klotzbuecher 2265e443c944SMarkus Klotzbuecher This setting describes a second storage area of CFG_ENV_SIZE 2266e443c944SMarkus Klotzbuecher size used to hold a redundant copy of the environment data, 2267e443c944SMarkus Klotzbuecher so that there is a valid backup copy in case there is a 2268e443c944SMarkus Klotzbuecher power failure during a "saveenv" operation. 2269e443c944SMarkus Klotzbuecher 2270e443c944SMarkus Klotzbuecher Note: CFG_ENV_OFFSET and CFG_ENV_OFFSET_REDUND must be aligned 2271e443c944SMarkus Klotzbuecher to a block boundary, and CFG_ENV_SIZE must be a multiple of 2272e443c944SMarkus Klotzbuecher the NAND devices block size. 2273e443c944SMarkus Klotzbuecher 2274c609719bSwdenk- CFG_SPI_INIT_OFFSET 2275c609719bSwdenk 2276c609719bSwdenk Defines offset to the initial SPI buffer area in DPRAM. The 2277c609719bSwdenk area is used at an early stage (ROM part) if the environment 2278c609719bSwdenk is configured to reside in the SPI EEPROM: We need a 520 byte 2279c609719bSwdenk scratch DPRAM area. It is used between the two initialization 2280c609719bSwdenk calls (spi_init_f() and spi_init_r()). A value of 0xB00 seems 2281c609719bSwdenk to be a good choice since it makes it far enough from the 2282c609719bSwdenk start of the data area as well as from the stack pointer. 2283c609719bSwdenk 2284e881cb56SBruce AdlerPlease note that the environment is read-only until the monitor 2285c609719bSwdenkhas been relocated to RAM and a RAM copy of the environment has been 2286c609719bSwdenkcreated; also, when using EEPROM you will have to use getenv_r() 2287c609719bSwdenkuntil then to read environment variables. 2288c609719bSwdenk 228985ec0bccSwdenkThe environment is protected by a CRC32 checksum. Before the monitor 229085ec0bccSwdenkis relocated into RAM, as a result of a bad CRC you will be working 229185ec0bccSwdenkwith the compiled-in default environment - *silently*!!! [This is 229285ec0bccSwdenknecessary, because the first environment variable we need is the 229385ec0bccSwdenk"baudrate" setting for the console - if we have a bad CRC, we don't 229485ec0bccSwdenkhave any device yet where we could complain.] 2295c609719bSwdenk 2296c609719bSwdenkNote: once the monitor has been relocated, then it will complain if 2297c609719bSwdenkthe default environment is used; a new CRC is computed as soon as you 229885ec0bccSwdenkuse the "saveenv" command to store a valid environment. 2299c609719bSwdenk 2300fc3e2165Swdenk- CFG_FAULT_ECHO_LINK_DOWN: 2301fc3e2165Swdenk Echo the inverted Ethernet link state to the fault LED. 2302fc3e2165Swdenk 2303fc3e2165Swdenk Note: If this option is active, then CFG_FAULT_MII_ADDR 2304fc3e2165Swdenk also needs to be defined. 2305fc3e2165Swdenk 2306fc3e2165Swdenk- CFG_FAULT_MII_ADDR: 2307fc3e2165Swdenk MII address of the PHY to check for the Ethernet link state. 2308c609719bSwdenk 2309c40b2956Swdenk- CFG_64BIT_VSPRINTF: 2310c40b2956Swdenk Makes vsprintf (and all *printf functions) support printing 2311c40b2956Swdenk of 64bit values by using the L quantifier 2312c40b2956Swdenk 2313c40b2956Swdenk- CFG_64BIT_STRTOUL: 2314c40b2956Swdenk Adds simple_strtoull that returns a 64bit value 2315c40b2956Swdenk 2316c609719bSwdenkLow Level (hardware related) configuration options: 2317dc7c9a1aSwdenk--------------------------------------------------- 2318c609719bSwdenk 2319c609719bSwdenk- CFG_CACHELINE_SIZE: 2320c609719bSwdenk Cache Line Size of the CPU. 2321c609719bSwdenk 2322c609719bSwdenk- CFG_DEFAULT_IMMR: 2323c609719bSwdenk Default address of the IMMR after system reset. 23242535d602Swdenk 23252535d602Swdenk Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU, 23262535d602Swdenk and RPXsuper) to be able to adjust the position of 23272535d602Swdenk the IMMR register after a reset. 2328c609719bSwdenk 23297f6c2cbcSwdenk- Floppy Disk Support: 23307f6c2cbcSwdenk CFG_FDC_DRIVE_NUMBER 23317f6c2cbcSwdenk 23327f6c2cbcSwdenk the default drive number (default value 0) 23337f6c2cbcSwdenk 23347f6c2cbcSwdenk CFG_ISA_IO_STRIDE 23357f6c2cbcSwdenk 233611ccc33fSMarcel Ziswiler defines the spacing between FDC chipset registers 23377f6c2cbcSwdenk (default value 1) 23387f6c2cbcSwdenk 23397f6c2cbcSwdenk CFG_ISA_IO_OFFSET 23407f6c2cbcSwdenk 23417f6c2cbcSwdenk defines the offset of register from address. It 23427f6c2cbcSwdenk depends on which part of the data bus is connected to 234311ccc33fSMarcel Ziswiler the FDC chipset. (default value 0) 23447f6c2cbcSwdenk 23457f6c2cbcSwdenk If CFG_ISA_IO_STRIDE CFG_ISA_IO_OFFSET and 23467f6c2cbcSwdenk CFG_FDC_DRIVE_NUMBER are undefined, they take their 23477f6c2cbcSwdenk default value. 23487f6c2cbcSwdenk 23497f6c2cbcSwdenk if CFG_FDC_HW_INIT is defined, then the function 23507f6c2cbcSwdenk fdc_hw_init() is called at the beginning of the FDC 23517f6c2cbcSwdenk setup. fdc_hw_init() must be provided by the board 23527f6c2cbcSwdenk source code. It is used to make hardware dependant 23537f6c2cbcSwdenk initializations. 23547f6c2cbcSwdenk 235525d6712aSwdenk- CFG_IMMR: Physical address of the Internal Memory. 235625d6712aSwdenk DO NOT CHANGE unless you know exactly what you're 235725d6712aSwdenk doing! (11-4) [MPC8xx/82xx systems only] 2358c609719bSwdenk 2359c609719bSwdenk- CFG_INIT_RAM_ADDR: 2360c609719bSwdenk 23617152b1d0Swdenk Start address of memory area that can be used for 2362c609719bSwdenk initial data and stack; please note that this must be 2363c609719bSwdenk writable memory that is working WITHOUT special 2364c609719bSwdenk initialization, i. e. you CANNOT use normal RAM which 2365c609719bSwdenk will become available only after programming the 2366c609719bSwdenk memory controller and running certain initialization 2367c609719bSwdenk sequences. 2368c609719bSwdenk 2369c609719bSwdenk U-Boot uses the following memory types: 2370c609719bSwdenk - MPC8xx and MPC8260: IMMR (internal memory of the CPU) 2371c609719bSwdenk - MPC824X: data cache 2372c609719bSwdenk - PPC4xx: data cache 2373c609719bSwdenk 237485ec0bccSwdenk- CFG_GBL_DATA_OFFSET: 2375c609719bSwdenk 2376c609719bSwdenk Offset of the initial data structure in the memory 2377c609719bSwdenk area defined by CFG_INIT_RAM_ADDR. Usually 237885ec0bccSwdenk CFG_GBL_DATA_OFFSET is chosen such that the initial 2379c609719bSwdenk data is located at the end of the available space 2380c609719bSwdenk (sometimes written as (CFG_INIT_RAM_END - 2381c609719bSwdenk CFG_INIT_DATA_SIZE), and the initial stack is just 2382c609719bSwdenk below that area (growing from (CFG_INIT_RAM_ADDR + 238385ec0bccSwdenk CFG_GBL_DATA_OFFSET) downward. 2384c609719bSwdenk 2385c609719bSwdenk Note: 2386c609719bSwdenk On the MPC824X (or other systems that use the data 2387c609719bSwdenk cache for initial memory) the address chosen for 2388c609719bSwdenk CFG_INIT_RAM_ADDR is basically arbitrary - it must 2389c609719bSwdenk point to an otherwise UNUSED address space between 2390c609719bSwdenk the top of RAM and the start of the PCI space. 2391c609719bSwdenk 2392c609719bSwdenk- CFG_SIUMCR: SIU Module Configuration (11-6) 2393c609719bSwdenk 2394c609719bSwdenk- CFG_SYPCR: System Protection Control (11-9) 2395c609719bSwdenk 2396c609719bSwdenk- CFG_TBSCR: Time Base Status and Control (11-26) 2397c609719bSwdenk 2398c609719bSwdenk- CFG_PISCR: Periodic Interrupt Status and Control (11-31) 2399c609719bSwdenk 2400c609719bSwdenk- CFG_PLPRCR: PLL, Low-Power, and Reset Control Register (15-30) 2401c609719bSwdenk 2402c609719bSwdenk- CFG_SCCR: System Clock and reset Control Register (15-27) 2403c609719bSwdenk 2404c609719bSwdenk- CFG_OR_TIMING_SDRAM: 2405c609719bSwdenk SDRAM timing 2406c609719bSwdenk 2407c609719bSwdenk- CFG_MAMR_PTA: 2408c609719bSwdenk periodic timer for refresh 2409c609719bSwdenk 2410c609719bSwdenk- CFG_DER: Debug Event Register (37-47) 2411c609719bSwdenk 2412c609719bSwdenk- FLASH_BASE0_PRELIM, FLASH_BASE1_PRELIM, CFG_REMAP_OR_AM, 2413c609719bSwdenk CFG_PRELIM_OR_AM, CFG_OR_TIMING_FLASH, CFG_OR0_REMAP, 2414c609719bSwdenk CFG_OR0_PRELIM, CFG_BR0_PRELIM, CFG_OR1_REMAP, CFG_OR1_PRELIM, 2415c609719bSwdenk CFG_BR1_PRELIM: 2416c609719bSwdenk Memory Controller Definitions: BR0/1 and OR0/1 (FLASH) 2417c609719bSwdenk 2418c609719bSwdenk- SDRAM_BASE2_PRELIM, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE, 2419c609719bSwdenk CFG_OR_TIMING_SDRAM, CFG_OR2_PRELIM, CFG_BR2_PRELIM, 2420c609719bSwdenk CFG_OR3_PRELIM, CFG_BR3_PRELIM: 2421c609719bSwdenk Memory Controller Definitions: BR2/3 and OR2/3 (SDRAM) 2422c609719bSwdenk 2423c609719bSwdenk- CFG_MAMR_PTA, CFG_MPTPR_2BK_4K, CFG_MPTPR_1BK_4K, CFG_MPTPR_2BK_8K, 2424c609719bSwdenk CFG_MPTPR_1BK_8K, CFG_MAMR_8COL, CFG_MAMR_9COL: 2425c609719bSwdenk Machine Mode Register and Memory Periodic Timer 2426c609719bSwdenk Prescaler definitions (SDRAM timing) 2427c609719bSwdenk 2428c609719bSwdenk- CFG_I2C_UCODE_PATCH, CFG_I2C_DPMEM_OFFSET [0x1FC0]: 2429c609719bSwdenk enable I2C microcode relocation patch (MPC8xx); 2430c609719bSwdenk define relocation offset in DPRAM [DSP2] 2431c609719bSwdenk 2432b423d055SHeiko Schocher- CFG_SMC_UCODE_PATCH, CFG_SMC_DPMEM_OFFSET [0x1FC0]: 2433b423d055SHeiko Schocher enable SMC microcode relocation patch (MPC8xx); 2434b423d055SHeiko Schocher define relocation offset in DPRAM [SMC1] 2435b423d055SHeiko Schocher 2436c609719bSwdenk- CFG_SPI_UCODE_PATCH, CFG_SPI_DPMEM_OFFSET [0x1FC0]: 2437c609719bSwdenk enable SPI microcode relocation patch (MPC8xx); 2438c609719bSwdenk define relocation offset in DPRAM [SCC4] 2439c609719bSwdenk 2440c609719bSwdenk- CFG_USE_OSCCLK: 2441c609719bSwdenk Use OSCM clock mode on MBX8xx board. Be careful, 2442c609719bSwdenk wrong setting might damage your board. Read 2443c609719bSwdenk doc/README.MBX before setting this variable! 2444c609719bSwdenk 2445ea909b76Swdenk- CFG_CPM_POST_WORD_ADDR: (MPC8xx, MPC8260 only) 2446ea909b76Swdenk Offset of the bootmode word in DPRAM used by post 2447ea909b76Swdenk (Power On Self Tests). This definition overrides 2448ea909b76Swdenk #define'd default value in commproc.h resp. 2449ea909b76Swdenk cpm_8260.h. 2450ea909b76Swdenk 24515d232d0eSwdenk- CFG_PCI_SLV_MEM_LOCAL, CFG_PCI_SLV_MEM_BUS, CFG_PICMR0_MASK_ATTRIB, 24525d232d0eSwdenk CFG_PCI_MSTR0_LOCAL, CFG_PCIMSK0_MASK, CFG_PCI_MSTR1_LOCAL, 24535d232d0eSwdenk CFG_PCIMSK1_MASK, CFG_PCI_MSTR_MEM_LOCAL, CFG_PCI_MSTR_MEM_BUS, 24545d232d0eSwdenk CFG_CPU_PCI_MEM_START, CFG_PCI_MSTR_MEM_SIZE, CFG_POCMR0_MASK_ATTRIB, 24555d232d0eSwdenk CFG_PCI_MSTR_MEMIO_LOCAL, CFG_PCI_MSTR_MEMIO_BUS, CPU_PCI_MEMIO_START, 24565d232d0eSwdenk CFG_PCI_MSTR_MEMIO_SIZE, CFG_POCMR1_MASK_ATTRIB, CFG_PCI_MSTR_IO_LOCAL, 24575d232d0eSwdenk CFG_PCI_MSTR_IO_BUS, CFG_CPU_PCI_IO_START, CFG_PCI_MSTR_IO_SIZE, 24585d232d0eSwdenk CFG_POCMR2_MASK_ATTRIB: (MPC826x only) 24595d232d0eSwdenk Overrides the default PCI memory map in cpu/mpc8260/pci.c if set. 24605d232d0eSwdenk 2461bb99ad6dSBen Warren- CONFIG_SPD_EEPROM 2462218ca724SWolfgang Denk Get DDR timing information from an I2C EEPROM. Common 2463218ca724SWolfgang Denk with pluggable memory modules such as SODIMMs 2464218ca724SWolfgang Denk 2465bb99ad6dSBen Warren SPD_EEPROM_ADDRESS 2466bb99ad6dSBen Warren I2C address of the SPD EEPROM 2467bb99ad6dSBen Warren 2468bb99ad6dSBen Warren- CFG_SPD_BUS_NUM 2469218ca724SWolfgang Denk If SPD EEPROM is on an I2C bus other than the first 2470218ca724SWolfgang Denk one, specify here. Note that the value must resolve 2471218ca724SWolfgang Denk to something your driver can deal with. 2472bb99ad6dSBen Warren 24732ad6b513STimur Tabi- CFG_83XX_DDR_USES_CS0 2474218ca724SWolfgang Denk Only for 83xx systems. If specified, then DDR should 2475218ca724SWolfgang Denk be configured using CS0 and CS1 instead of CS2 and CS3. 24762ad6b513STimur Tabi 24772ad6b513STimur Tabi- CFG_83XX_DDR_USES_CS0 2478218ca724SWolfgang Denk Only for 83xx systems. If specified, then DDR should 2479218ca724SWolfgang Denk be configured using CS0 and CS1 instead of CS2 and CS3. 24802ad6b513STimur Tabi 2481c26e454dSwdenk- CONFIG_ETHER_ON_FEC[12] 2482c26e454dSwdenk Define to enable FEC[12] on a 8xx series processor. 2483c26e454dSwdenk 2484c26e454dSwdenk- CONFIG_FEC[12]_PHY 2485c26e454dSwdenk Define to the hardcoded PHY address which corresponds 24866e592385Swdenk to the given FEC; i. e. 2487c26e454dSwdenk #define CONFIG_FEC1_PHY 4 2488c26e454dSwdenk means that the PHY with address 4 is connected to FEC1 2489c26e454dSwdenk 2490c26e454dSwdenk When set to -1, means to probe for first available. 2491c26e454dSwdenk 2492c26e454dSwdenk- CONFIG_FEC[12]_PHY_NORXERR 2493c26e454dSwdenk The PHY does not have a RXERR line (RMII only). 2494c26e454dSwdenk (so program the FEC to ignore it). 2495c26e454dSwdenk 2496c26e454dSwdenk- CONFIG_RMII 2497c26e454dSwdenk Enable RMII mode for all FECs. 2498c26e454dSwdenk Note that this is a global option, we can't 2499c26e454dSwdenk have one FEC in standard MII mode and another in RMII mode. 2500c26e454dSwdenk 25015cf91d6bSwdenk- CONFIG_CRC32_VERIFY 25025cf91d6bSwdenk Add a verify option to the crc32 command. 25035cf91d6bSwdenk The syntax is: 25045cf91d6bSwdenk 25055cf91d6bSwdenk => crc32 -v <address> <count> <crc32> 25065cf91d6bSwdenk 25075cf91d6bSwdenk Where address/count indicate a memory area 25085cf91d6bSwdenk and crc32 is the correct crc32 which the 25095cf91d6bSwdenk area should have. 25105cf91d6bSwdenk 251156523f12Swdenk- CONFIG_LOOPW 251256523f12Swdenk Add the "loopw" memory command. This only takes effect if 2513602ad3b3SJon Loeliger the memory commands are activated globally (CONFIG_CMD_MEM). 251456523f12Swdenk 25157b466641Sstroese- CONFIG_MX_CYCLIC 25167b466641Sstroese Add the "mdc" and "mwc" memory commands. These are cyclic 25177b466641Sstroese "md/mw" commands. 25187b466641Sstroese Examples: 25197b466641Sstroese 25207b466641Sstroese => mdc.b 10 4 500 25217b466641Sstroese This command will print 4 bytes (10,11,12,13) each 500 ms. 25227b466641Sstroese 25237b466641Sstroese => mwc.l 100 12345678 10 25247b466641Sstroese This command will write 12345678 to address 100 all 10 ms. 25257b466641Sstroese 25267b466641Sstroese This only takes effect if the memory commands are activated 2527602ad3b3SJon Loeliger globally (CONFIG_CMD_MEM). 25287b466641Sstroese 25298aa1a2d1Swdenk- CONFIG_SKIP_LOWLEVEL_INIT 25308aa1a2d1Swdenk- CONFIG_SKIP_RELOCATE_UBOOT 25318aa1a2d1Swdenk 25328aa1a2d1Swdenk [ARM only] If these variables are defined, then 25338aa1a2d1Swdenk certain low level initializations (like setting up 25348aa1a2d1Swdenk the memory controller) are omitted and/or U-Boot does 25358aa1a2d1Swdenk not relocate itself into RAM. 25368aa1a2d1Swdenk Normally these variables MUST NOT be defined. The 25378aa1a2d1Swdenk only exception is when U-Boot is loaded (to RAM) by 25388aa1a2d1Swdenk some other boot loader or by a debugger which 253911ccc33fSMarcel Ziswiler performs these initializations itself. 25408aa1a2d1Swdenk 2541400558b5Swdenk 2542c609719bSwdenkBuilding the Software: 2543c609719bSwdenk====================== 2544c609719bSwdenk 2545218ca724SWolfgang DenkBuilding U-Boot has been tested in several native build environments 2546218ca724SWolfgang Denkand in many different cross environments. Of course we cannot support 2547218ca724SWolfgang Denkall possibly existing versions of cross development tools in all 2548218ca724SWolfgang Denk(potentially obsolete) versions. In case of tool chain problems we 2549218ca724SWolfgang Denkrecommend to use the ELDK (see http://www.denx.de/wiki/DULG/ELDK) 2550218ca724SWolfgang Denkwhich is extensively used to build and test U-Boot. 2551c609719bSwdenk 2552218ca724SWolfgang DenkIf you are not using a native environment, it is assumed that you 2553218ca724SWolfgang Denkhave GNU cross compiling tools available in your path. In this case, 2554218ca724SWolfgang Denkyou must set the environment variable CROSS_COMPILE in your shell. 2555218ca724SWolfgang DenkNote that no changes to the Makefile or any other source files are 2556218ca724SWolfgang Denknecessary. For example using the ELDK on a 4xx CPU, please enter: 2557c609719bSwdenk 2558218ca724SWolfgang Denk $ CROSS_COMPILE=ppc_4xx- 2559218ca724SWolfgang Denk $ export CROSS_COMPILE 2560c609719bSwdenk 2561c609719bSwdenkU-Boot is intended to be simple to build. After installing the 2562c609719bSwdenksources you must configure U-Boot for one specific board type. This 2563c609719bSwdenkis done by typing: 2564c609719bSwdenk 2565c609719bSwdenk make NAME_config 2566c609719bSwdenk 2567218ca724SWolfgang Denkwhere "NAME_config" is the name of one of the existing configu- 2568218ca724SWolfgang Denkrations; see the main Makefile for supported names. 256954387ac9Swdenk 2570c609719bSwdenkNote: for some board special configuration names may exist; check if 2571c609719bSwdenk additional information is available from the board vendor; for 25722729af9dSwdenk instance, the TQM823L systems are available without (standard) 25732729af9dSwdenk or with LCD support. You can select such additional "features" 257411ccc33fSMarcel Ziswiler when choosing the configuration, i. e. 2575c609719bSwdenk 25762729af9dSwdenk make TQM823L_config 25772729af9dSwdenk - will configure for a plain TQM823L, i. e. no LCD support 2578c609719bSwdenk 2579c609719bSwdenk make TQM823L_LCD_config 2580c609719bSwdenk - will configure for a TQM823L with U-Boot console on LCD 2581c609719bSwdenk 2582c609719bSwdenk etc. 2583c609719bSwdenk 2584c609719bSwdenk 2585c609719bSwdenkFinally, type "make all", and you should get some working U-Boot 25867152b1d0Swdenkimages ready for download to / installation on your system: 2587c609719bSwdenk 2588c609719bSwdenk- "u-boot.bin" is a raw binary image 2589c609719bSwdenk- "u-boot" is an image in ELF binary format 2590c609719bSwdenk- "u-boot.srec" is in Motorola S-Record format 2591c609719bSwdenk 2592baf31249SMarian BalakowiczBy default the build is performed locally and the objects are saved 2593baf31249SMarian Balakowiczin the source directory. One of the two methods can be used to change 2594baf31249SMarian Balakowiczthis behavior and build U-Boot to some external directory: 2595baf31249SMarian Balakowicz 2596baf31249SMarian Balakowicz1. Add O= to the make command line invocations: 2597baf31249SMarian Balakowicz 2598baf31249SMarian Balakowicz make O=/tmp/build distclean 2599baf31249SMarian Balakowicz make O=/tmp/build NAME_config 2600baf31249SMarian Balakowicz make O=/tmp/build all 2601baf31249SMarian Balakowicz 2602baf31249SMarian Balakowicz2. Set environment variable BUILD_DIR to point to the desired location: 2603baf31249SMarian Balakowicz 2604baf31249SMarian Balakowicz export BUILD_DIR=/tmp/build 2605baf31249SMarian Balakowicz make distclean 2606baf31249SMarian Balakowicz make NAME_config 2607baf31249SMarian Balakowicz make all 2608baf31249SMarian Balakowicz 2609baf31249SMarian BalakowiczNote that the command line "O=" setting overrides the BUILD_DIR environment 2610baf31249SMarian Balakowiczvariable. 2611baf31249SMarian Balakowicz 2612c609719bSwdenk 2613c609719bSwdenkPlease be aware that the Makefiles assume you are using GNU make, so 2614c609719bSwdenkfor instance on NetBSD you might need to use "gmake" instead of 2615c609719bSwdenknative "make". 2616c609719bSwdenk 2617c609719bSwdenk 2618c609719bSwdenkIf the system board that you have is not listed, then you will need 2619c609719bSwdenkto port U-Boot to your hardware platform. To do this, follow these 2620c609719bSwdenksteps: 2621c609719bSwdenk 2622c609719bSwdenk1. Add a new configuration option for your board to the toplevel 262385ec0bccSwdenk "Makefile" and to the "MAKEALL" script, using the existing 262485ec0bccSwdenk entries as examples. Note that here and at many other places 26257152b1d0Swdenk boards and other names are listed in alphabetical sort order. Please 262685ec0bccSwdenk keep this order. 2627c609719bSwdenk2. Create a new directory to hold your board specific code. Add any 262885ec0bccSwdenk files you need. In your board directory, you will need at least 262985ec0bccSwdenk the "Makefile", a "<board>.c", "flash.c" and "u-boot.lds". 263085ec0bccSwdenk3. Create a new configuration file "include/configs/<board>.h" for 263185ec0bccSwdenk your board 2632c609719bSwdenk3. If you're porting U-Boot to a new CPU, then also create a new 2633c609719bSwdenk directory to hold your CPU specific code. Add any files you need. 263485ec0bccSwdenk4. Run "make <board>_config" with your new name. 2635c609719bSwdenk5. Type "make", and you should get a working "u-boot.srec" file 2636c609719bSwdenk to be installed on your target system. 263785ec0bccSwdenk6. Debug and solve any problems that might arise. 2638c609719bSwdenk [Of course, this last step is much harder than it sounds.] 2639c609719bSwdenk 2640c609719bSwdenk 2641c609719bSwdenkTesting of U-Boot Modifications, Ports to New Hardware, etc.: 2642c609719bSwdenk============================================================== 2643c609719bSwdenk 2644c609719bSwdenkIf you have modified U-Boot sources (for instance added a new board 2645c609719bSwdenkor support for new devices, a new CPU, etc.) you are expected to 2646c609719bSwdenkprovide feedback to the other developers. The feedback normally takes 2647c609719bSwdenkthe form of a "patch", i. e. a context diff against a certain (latest 2648218ca724SWolfgang Denkofficial or latest in the git repository) version of U-Boot sources. 2649c609719bSwdenk 2650c609719bSwdenkBut before you submit such a patch, please verify that your modifi- 2651c609719bSwdenkcation did not break existing code. At least make sure that *ALL* of 2652c609719bSwdenkthe supported boards compile WITHOUT ANY compiler warnings. To do so, 2653c609719bSwdenkjust run the "MAKEALL" script, which will configure and build U-Boot 2654c609719bSwdenkfor ALL supported system. Be warned, this will take a while. You can 26557152b1d0Swdenkselect which (cross) compiler to use by passing a `CROSS_COMPILE' 2656218ca724SWolfgang Denkenvironment variable to the script, i. e. to use the ELDK cross tools 2657218ca724SWolfgang Denkyou can type 2658c609719bSwdenk 2659c609719bSwdenk CROSS_COMPILE=ppc_8xx- MAKEALL 2660c609719bSwdenk 2661c609719bSwdenkor to build on a native PowerPC system you can type 2662c609719bSwdenk 2663c609719bSwdenk CROSS_COMPILE=' ' MAKEALL 2664c609719bSwdenk 2665218ca724SWolfgang DenkWhen using the MAKEALL script, the default behaviour is to build 2666218ca724SWolfgang DenkU-Boot in the source directory. This location can be changed by 2667218ca724SWolfgang Denksetting the BUILD_DIR environment variable. Also, for each target 2668218ca724SWolfgang Denkbuilt, the MAKEALL script saves two log files (<target>.ERR and 2669218ca724SWolfgang Denk<target>.MAKEALL) in the <source dir>/LOG directory. This default 2670218ca724SWolfgang Denklocation can be changed by setting the MAKEALL_LOGDIR environment 2671218ca724SWolfgang Denkvariable. For example: 2672baf31249SMarian Balakowicz 2673baf31249SMarian Balakowicz export BUILD_DIR=/tmp/build 2674baf31249SMarian Balakowicz export MAKEALL_LOGDIR=/tmp/log 2675baf31249SMarian Balakowicz CROSS_COMPILE=ppc_8xx- MAKEALL 2676baf31249SMarian Balakowicz 2677218ca724SWolfgang DenkWith the above settings build objects are saved in the /tmp/build, 2678218ca724SWolfgang Denklog files are saved in the /tmp/log and the source tree remains clean 2679218ca724SWolfgang Denkduring the whole build process. 2680baf31249SMarian Balakowicz 2681baf31249SMarian Balakowicz 2682c609719bSwdenkSee also "U-Boot Porting Guide" below. 2683c609719bSwdenk 2684c609719bSwdenk 2685c609719bSwdenkMonitor Commands - Overview: 2686c609719bSwdenk============================ 2687c609719bSwdenk 2688c609719bSwdenkgo - start application at address 'addr' 2689c609719bSwdenkrun - run commands in an environment variable 2690c609719bSwdenkbootm - boot application image from memory 2691c609719bSwdenkbootp - boot image via network using BootP/TFTP protocol 2692c609719bSwdenktftpboot- boot image via network using TFTP protocol 2693c609719bSwdenk and env variables "ipaddr" and "serverip" 2694c609719bSwdenk (and eventually "gatewayip") 2695c609719bSwdenkrarpboot- boot image via network using RARP/TFTP protocol 2696c609719bSwdenkdiskboot- boot from IDE devicebootd - boot default, i.e., run 'bootcmd' 2697c609719bSwdenkloads - load S-Record file over serial line 2698c609719bSwdenkloadb - load binary file over serial line (kermit mode) 2699c609719bSwdenkmd - memory display 2700c609719bSwdenkmm - memory modify (auto-incrementing) 2701c609719bSwdenknm - memory modify (constant address) 2702c609719bSwdenkmw - memory write (fill) 2703c609719bSwdenkcp - memory copy 2704c609719bSwdenkcmp - memory compare 2705c609719bSwdenkcrc32 - checksum calculation 2706c609719bSwdenkimd - i2c memory display 2707c609719bSwdenkimm - i2c memory modify (auto-incrementing) 2708c609719bSwdenkinm - i2c memory modify (constant address) 2709c609719bSwdenkimw - i2c memory write (fill) 2710c609719bSwdenkicrc32 - i2c checksum calculation 2711c609719bSwdenkiprobe - probe to discover valid I2C chip addresses 2712c609719bSwdenkiloop - infinite loop on address range 2713c609719bSwdenkisdram - print SDRAM configuration information 2714c609719bSwdenksspi - SPI utility commands 2715c609719bSwdenkbase - print or set address offset 2716c609719bSwdenkprintenv- print environment variables 2717c609719bSwdenksetenv - set environment variables 2718c609719bSwdenksaveenv - save environment variables to persistent storage 2719c609719bSwdenkprotect - enable or disable FLASH write protection 2720c609719bSwdenkerase - erase FLASH memory 2721c609719bSwdenkflinfo - print FLASH memory information 2722c609719bSwdenkbdinfo - print Board Info structure 2723c609719bSwdenkiminfo - print header information for application image 2724c609719bSwdenkconinfo - print console devices and informations 2725c609719bSwdenkide - IDE sub-system 2726c609719bSwdenkloop - infinite loop on address range 272756523f12Swdenkloopw - infinite write loop on address range 2728c609719bSwdenkmtest - simple RAM test 2729c609719bSwdenkicache - enable or disable instruction cache 2730c609719bSwdenkdcache - enable or disable data cache 2731c609719bSwdenkreset - Perform RESET of the CPU 2732c609719bSwdenkecho - echo args to console 2733c609719bSwdenkversion - print monitor version 2734c609719bSwdenkhelp - print online help 2735c609719bSwdenk? - alias for 'help' 2736c609719bSwdenk 2737c609719bSwdenk 2738c609719bSwdenkMonitor Commands - Detailed Description: 2739c609719bSwdenk======================================== 2740c609719bSwdenk 2741c609719bSwdenkTODO. 2742c609719bSwdenk 2743c609719bSwdenkFor now: just type "help <command>". 2744c609719bSwdenk 2745c609719bSwdenk 2746c609719bSwdenkEnvironment Variables: 2747c609719bSwdenk====================== 2748c609719bSwdenk 2749c609719bSwdenkU-Boot supports user configuration using Environment Variables which 2750c609719bSwdenkcan be made persistent by saving to Flash memory. 2751c609719bSwdenk 2752c609719bSwdenkEnvironment Variables are set using "setenv", printed using 2753c609719bSwdenk"printenv", and saved to Flash using "saveenv". Using "setenv" 2754c609719bSwdenkwithout a value can be used to delete a variable from the 2755c609719bSwdenkenvironment. As long as you don't save the environment you are 2756c609719bSwdenkworking with an in-memory copy. In case the Flash area containing the 2757c609719bSwdenkenvironment is erased by accident, a default environment is provided. 2758c609719bSwdenk 2759c609719bSwdenkSome configuration options can be set using Environment Variables: 2760c609719bSwdenk 2761c609719bSwdenk baudrate - see CONFIG_BAUDRATE 2762c609719bSwdenk 2763c609719bSwdenk bootdelay - see CONFIG_BOOTDELAY 2764c609719bSwdenk 2765c609719bSwdenk bootcmd - see CONFIG_BOOTCOMMAND 2766c609719bSwdenk 2767c609719bSwdenk bootargs - Boot arguments when booting an RTOS image 2768c609719bSwdenk 2769c609719bSwdenk bootfile - Name of the image to load with TFTP 2770c609719bSwdenk 27717d721e34SBartlomiej Sieka bootm_low - Memory range available for image processing in the bootm 27727d721e34SBartlomiej Sieka command can be restricted. This variable is given as 27737d721e34SBartlomiej Sieka a hexadecimal number and defines lowest address allowed 27747d721e34SBartlomiej Sieka for use by the bootm command. See also "bootm_size" 27757d721e34SBartlomiej Sieka environment variable. Address defined by "bootm_low" is 27767d721e34SBartlomiej Sieka also the base of the initial memory mapping for the Linux 277711ccc33fSMarcel Ziswiler kernel -- see the description of CFG_BOOTMAPSZ. 27787d721e34SBartlomiej Sieka 27797d721e34SBartlomiej Sieka bootm_size - Memory range available for image processing in the bootm 27807d721e34SBartlomiej Sieka command can be restricted. This variable is given as 27817d721e34SBartlomiej Sieka a hexadecimal number and defines the size of the region 27827d721e34SBartlomiej Sieka allowed for use by the bootm command. See also "bootm_low" 27837d721e34SBartlomiej Sieka environment variable. 27847d721e34SBartlomiej Sieka 2785c609719bSwdenk autoload - if set to "no" (any string beginning with 'n'), 2786c609719bSwdenk "bootp" will just load perform a lookup of the 2787c609719bSwdenk configuration from the BOOTP server, but not try to 2788c609719bSwdenk load any image using TFTP 2789c609719bSwdenk 27903310c549SMarian Balakowicz autoscript - if set to "yes" commands like "loadb", "loady", 27913310c549SMarian Balakowicz "bootp", "tftpb", "rarpboot" and "nfs" will attempt 27923310c549SMarian Balakowicz to automatically run script images (by internally 27933310c549SMarian Balakowicz calling "autoscript"). 27943310c549SMarian Balakowicz 27953310c549SMarian Balakowicz autoscript_uname - if script image is in a format (FIT) this 27963310c549SMarian Balakowicz variable is used to get script subimage unit name. 27973310c549SMarian Balakowicz 2798c609719bSwdenk autostart - if set to "yes", an image loaded using the "bootp", 2799c609719bSwdenk "rarpboot", "tftpboot" or "diskboot" commands will 2800c609719bSwdenk be automatically started (by internally calling 2801c609719bSwdenk "bootm") 2802c609719bSwdenk 28034a6fd34bSwdenk If set to "no", a standalone image passed to the 28044a6fd34bSwdenk "bootm" command will be copied to the load address 28054a6fd34bSwdenk (and eventually uncompressed), but NOT be started. 28064a6fd34bSwdenk This can be used to load and uncompress arbitrary 28074a6fd34bSwdenk data. 28084a6fd34bSwdenk 280917ea1177Swdenk i2cfast - (PPC405GP|PPC405EP only) 281017ea1177Swdenk if set to 'y' configures Linux I2C driver for fast 281117ea1177Swdenk mode (400kHZ). This environment variable is used in 281217ea1177Swdenk initialization code. So, for changes to be effective 281317ea1177Swdenk it must be saved and board must be reset. 281417ea1177Swdenk 2815c609719bSwdenk initrd_high - restrict positioning of initrd images: 2816c609719bSwdenk If this variable is not set, initrd images will be 2817c609719bSwdenk copied to the highest possible address in RAM; this 2818c609719bSwdenk is usually what you want since it allows for 2819c609719bSwdenk maximum initrd size. If for some reason you want to 2820c609719bSwdenk make sure that the initrd image is loaded below the 2821c609719bSwdenk CFG_BOOTMAPSZ limit, you can set this environment 2822c609719bSwdenk variable to a value of "no" or "off" or "0". 2823c609719bSwdenk Alternatively, you can set it to a maximum upper 2824c609719bSwdenk address to use (U-Boot will still check that it 2825c609719bSwdenk does not overwrite the U-Boot stack and data). 2826c609719bSwdenk 2827c609719bSwdenk For instance, when you have a system with 16 MB 28287152b1d0Swdenk RAM, and want to reserve 4 MB from use by Linux, 2829c609719bSwdenk you can do this by adding "mem=12M" to the value of 2830c609719bSwdenk the "bootargs" variable. However, now you must make 28317152b1d0Swdenk sure that the initrd image is placed in the first 2832c609719bSwdenk 12 MB as well - this can be done with 2833c609719bSwdenk 2834c609719bSwdenk setenv initrd_high 00c00000 2835c609719bSwdenk 283638b99261Swdenk If you set initrd_high to 0xFFFFFFFF, this is an 283738b99261Swdenk indication to U-Boot that all addresses are legal 283838b99261Swdenk for the Linux kernel, including addresses in flash 283938b99261Swdenk memory. In this case U-Boot will NOT COPY the 284038b99261Swdenk ramdisk at all. This may be useful to reduce the 284138b99261Swdenk boot time on your system, but requires that this 284238b99261Swdenk feature is supported by your Linux kernel. 284338b99261Swdenk 2844c609719bSwdenk ipaddr - IP address; needed for tftpboot command 2845c609719bSwdenk 2846c609719bSwdenk loadaddr - Default load address for commands like "bootp", 2847dc7c9a1aSwdenk "rarpboot", "tftpboot", "loadb" or "diskboot" 2848c609719bSwdenk 2849c609719bSwdenk loads_echo - see CONFIG_LOADS_ECHO 2850c609719bSwdenk 2851c609719bSwdenk serverip - TFTP server IP address; needed for tftpboot command 2852c609719bSwdenk 2853c609719bSwdenk bootretry - see CONFIG_BOOT_RETRY_TIME 2854c609719bSwdenk 2855c609719bSwdenk bootdelaykey - see CONFIG_AUTOBOOT_DELAY_STR 2856c609719bSwdenk 2857c609719bSwdenk bootstopkey - see CONFIG_AUTOBOOT_STOP_STR 2858c609719bSwdenk 2859a3d991bdSwdenk ethprime - When CONFIG_NET_MULTI is enabled controls which 2860a3d991bdSwdenk interface is used first. 2861a3d991bdSwdenk 2862a3d991bdSwdenk ethact - When CONFIG_NET_MULTI is enabled controls which 2863a3d991bdSwdenk interface is currently active. For example you 2864a3d991bdSwdenk can do the following 2865a3d991bdSwdenk 2866a3d991bdSwdenk => setenv ethact FEC ETHERNET 2867a3d991bdSwdenk => ping 192.168.0.1 # traffic sent on FEC ETHERNET 2868a3d991bdSwdenk => setenv ethact SCC ETHERNET 2869a3d991bdSwdenk => ping 10.0.0.1 # traffic sent on SCC ETHERNET 2870a3d991bdSwdenk 2871e1692577SMatthias Fuchs ethrotate - When set to "no" U-Boot does not go through all 2872e1692577SMatthias Fuchs available network interfaces. 2873e1692577SMatthias Fuchs It just stays at the currently selected interface. 2874e1692577SMatthias Fuchs 2875a3d991bdSwdenk netretry - When set to "no" each network operation will 2876a3d991bdSwdenk either succeed or fail without retrying. 28776e592385Swdenk When set to "once" the network operation will 28786e592385Swdenk fail when all the available network interfaces 28796e592385Swdenk are tried once without success. 2880a3d991bdSwdenk Useful on scripts which control the retry operation 2881a3d991bdSwdenk themselves. 2882a3d991bdSwdenk 2883a1cf027aSJean-Christophe PLAGNIOL-VILLARD npe_ucode - see CONFIG_IXP4XX_NPE_EXT_UCOD 288411ccc33fSMarcel Ziswiler if set load address for the NPE microcode 2885a1cf027aSJean-Christophe PLAGNIOL-VILLARD 288628cb9375SWolfgang Denk tftpsrcport - If this is set, the value is used for TFTP's 2887ecb0ccd9SWolfgang Denk UDP source port. 2888ecb0ccd9SWolfgang Denk 288928cb9375SWolfgang Denk tftpdstport - If this is set, the value is used for TFTP's UDP 289028cb9375SWolfgang Denk destination port instead of the Well Know Port 69. 289128cb9375SWolfgang Denk 2892a3d991bdSwdenk vlan - When set to a value < 4095 the traffic over 289311ccc33fSMarcel Ziswiler Ethernet is encapsulated/received over 802.1q 2894a3d991bdSwdenk VLAN tagged frames. 2895c609719bSwdenk 2896c609719bSwdenkThe following environment variables may be used and automatically 2897c609719bSwdenkupdated by the network boot commands ("bootp" and "rarpboot"), 2898c609719bSwdenkdepending the information provided by your boot server: 2899c609719bSwdenk 2900c609719bSwdenk bootfile - see above 2901c609719bSwdenk dnsip - IP address of your Domain Name Server 2902fe389a82Sstroese dnsip2 - IP address of your secondary Domain Name Server 2903c609719bSwdenk gatewayip - IP address of the Gateway (Router) to use 2904c609719bSwdenk hostname - Target hostname 2905c609719bSwdenk ipaddr - see above 2906c609719bSwdenk netmask - Subnet Mask 2907c609719bSwdenk rootpath - Pathname of the root filesystem on the NFS server 2908c609719bSwdenk serverip - see above 2909c609719bSwdenk 2910c609719bSwdenk 2911c609719bSwdenkThere are two special Environment Variables: 2912c609719bSwdenk 2913c609719bSwdenk serial# - contains hardware identification information such 2914c609719bSwdenk as type string and/or serial number 2915c609719bSwdenk ethaddr - Ethernet address 2916c609719bSwdenk 2917c609719bSwdenkThese variables can be set only once (usually during manufacturing of 2918c609719bSwdenkthe board). U-Boot refuses to delete or overwrite these variables 2919c609719bSwdenkonce they have been set once. 2920c609719bSwdenk 2921c609719bSwdenk 2922c1551ea8SstroeseFurther special Environment Variables: 2923c1551ea8Sstroese 2924c1551ea8Sstroese ver - Contains the U-Boot version string as printed 2925c1551ea8Sstroese with the "version" command. This variable is 2926c1551ea8Sstroese readonly (see CONFIG_VERSION_VARIABLE). 2927c1551ea8Sstroese 2928c1551ea8Sstroese 2929c609719bSwdenkPlease note that changes to some configuration parameters may take 2930c609719bSwdenkonly effect after the next boot (yes, that's just like Windoze :-). 2931c609719bSwdenk 2932c609719bSwdenk 2933f07771ccSwdenkCommand Line Parsing: 2934f07771ccSwdenk===================== 2935f07771ccSwdenk 2936f07771ccSwdenkThere are two different command line parsers available with U-Boot: 29377152b1d0Swdenkthe old "simple" one, and the much more powerful "hush" shell: 2938f07771ccSwdenk 2939f07771ccSwdenkOld, simple command line parser: 2940f07771ccSwdenk-------------------------------- 2941f07771ccSwdenk 2942f07771ccSwdenk- supports environment variables (through setenv / saveenv commands) 2943f07771ccSwdenk- several commands on one line, separated by ';' 2944fe126d8bSWolfgang Denk- variable substitution using "... ${name} ..." syntax 2945f07771ccSwdenk- special characters ('$', ';') can be escaped by prefixing with '\', 2946f07771ccSwdenk for example: 2947fe126d8bSWolfgang Denk setenv bootcmd bootm \${address} 2948f07771ccSwdenk- You can also escape text by enclosing in single apostrophes, for example: 2949f07771ccSwdenk setenv addip 'setenv bootargs $bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off' 2950f07771ccSwdenk 2951f07771ccSwdenkHush shell: 2952f07771ccSwdenk----------- 2953f07771ccSwdenk 2954f07771ccSwdenk- similar to Bourne shell, with control structures like 2955f07771ccSwdenk if...then...else...fi, for...do...done; while...do...done, 2956f07771ccSwdenk until...do...done, ... 2957f07771ccSwdenk- supports environment ("global") variables (through setenv / saveenv 2958f07771ccSwdenk commands) and local shell variables (through standard shell syntax 2959f07771ccSwdenk "name=value"); only environment variables can be used with "run" 2960f07771ccSwdenk command 2961f07771ccSwdenk 2962f07771ccSwdenkGeneral rules: 2963f07771ccSwdenk-------------- 2964f07771ccSwdenk 2965f07771ccSwdenk(1) If a command line (or an environment variable executed by a "run" 2966f07771ccSwdenk command) contains several commands separated by semicolon, and 2967f07771ccSwdenk one of these commands fails, then the remaining commands will be 2968f07771ccSwdenk executed anyway. 2969f07771ccSwdenk 2970f07771ccSwdenk(2) If you execute several variables with one call to run (i. e. 297111ccc33fSMarcel Ziswiler calling run with a list of variables as arguments), any failing 2972f07771ccSwdenk command will cause "run" to terminate, i. e. the remaining 2973f07771ccSwdenk variables are not executed. 2974f07771ccSwdenk 2975c609719bSwdenkNote for Redundant Ethernet Interfaces: 2976c609719bSwdenk======================================= 2977c609719bSwdenk 297811ccc33fSMarcel ZiswilerSome boards come with redundant Ethernet interfaces; U-Boot supports 2979c609719bSwdenksuch configurations and is capable of automatic selection of a 29807152b1d0Swdenk"working" interface when needed. MAC assignment works as follows: 2981c609719bSwdenk 2982c609719bSwdenkNetwork interfaces are numbered eth0, eth1, eth2, ... Corresponding 2983c609719bSwdenkMAC addresses can be stored in the environment as "ethaddr" (=>eth0), 2984c609719bSwdenk"eth1addr" (=>eth1), "eth2addr", ... 2985c609719bSwdenk 2986c609719bSwdenkIf the network interface stores some valid MAC address (for instance 2987c609719bSwdenkin SROM), this is used as default address if there is NO correspon- 2988c609719bSwdenkding setting in the environment; if the corresponding environment 2989c609719bSwdenkvariable is set, this overrides the settings in the card; that means: 2990c609719bSwdenk 2991c609719bSwdenko If the SROM has a valid MAC address, and there is no address in the 2992c609719bSwdenk environment, the SROM's address is used. 2993c609719bSwdenk 2994c609719bSwdenko If there is no valid address in the SROM, and a definition in the 2995c609719bSwdenk environment exists, then the value from the environment variable is 2996c609719bSwdenk used. 2997c609719bSwdenk 2998c609719bSwdenko If both the SROM and the environment contain a MAC address, and 2999c609719bSwdenk both addresses are the same, this MAC address is used. 3000c609719bSwdenk 3001c609719bSwdenko If both the SROM and the environment contain a MAC address, and the 3002c609719bSwdenk addresses differ, the value from the environment is used and a 3003c609719bSwdenk warning is printed. 3004c609719bSwdenk 3005c609719bSwdenko If neither SROM nor the environment contain a MAC address, an error 3006c609719bSwdenk is raised. 3007c609719bSwdenk 3008c609719bSwdenk 3009c609719bSwdenkImage Formats: 3010c609719bSwdenk============== 3011c609719bSwdenk 30123310c549SMarian BalakowiczU-Boot is capable of booting (and performing other auxiliary operations on) 30133310c549SMarian Balakowiczimages in two formats: 30143310c549SMarian Balakowicz 30153310c549SMarian BalakowiczNew uImage format (FIT) 30163310c549SMarian Balakowicz----------------------- 30173310c549SMarian Balakowicz 30183310c549SMarian BalakowiczFlexible and powerful format based on Flattened Image Tree -- FIT (similar 30193310c549SMarian Balakowiczto Flattened Device Tree). It allows the use of images with multiple 30203310c549SMarian Balakowiczcomponents (several kernels, ramdisks, etc.), with contents protected by 30213310c549SMarian BalakowiczSHA1, MD5 or CRC32. More details are found in the doc/uImage.FIT directory. 30223310c549SMarian Balakowicz 30233310c549SMarian Balakowicz 30243310c549SMarian BalakowiczOld uImage format 30253310c549SMarian Balakowicz----------------- 30263310c549SMarian Balakowicz 30273310c549SMarian BalakowiczOld image format is based on binary files which can be basically anything, 30283310c549SMarian Balakowiczpreceded by a special header; see the definitions in include/image.h for 30293310c549SMarian Balakowiczdetails; basically, the header defines the following image properties: 3030c609719bSwdenk 3031c609719bSwdenk* Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD, 3032c609719bSwdenk 4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks, 30337f70e853Swdenk LynxOS, pSOS, QNX, RTEMS, ARTOS; 30341f4bb37dSwdenk Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, ARTOS, LynxOS). 30357b64fef3SWolfgang Denk* Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86, 30363d1e8a9dSwdenk IA64, MIPS, NIOS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit; 30377b64fef3SWolfgang Denk Currently supported: ARM, AVR32, Intel x86, MIPS, NIOS, PowerPC). 3038c29fdfc1Swdenk* Compression Type (uncompressed, gzip, bzip2) 3039c609719bSwdenk* Load Address 3040c609719bSwdenk* Entry Point 3041c609719bSwdenk* Image Name 3042c609719bSwdenk* Image Timestamp 3043c609719bSwdenk 3044c609719bSwdenkThe header is marked by a special Magic Number, and both the header 3045c609719bSwdenkand the data portions of the image are secured against corruption by 3046c609719bSwdenkCRC32 checksums. 3047c609719bSwdenk 3048c609719bSwdenk 3049c609719bSwdenkLinux Support: 3050c609719bSwdenk============== 3051c609719bSwdenk 3052c609719bSwdenkAlthough U-Boot should support any OS or standalone application 30537152b1d0Swdenkeasily, the main focus has always been on Linux during the design of 3054c609719bSwdenkU-Boot. 3055c609719bSwdenk 3056c609719bSwdenkU-Boot includes many features that so far have been part of some 3057c609719bSwdenkspecial "boot loader" code within the Linux kernel. Also, any 3058c609719bSwdenk"initrd" images to be used are no longer part of one big Linux image; 3059c609719bSwdenkinstead, kernel and "initrd" are separate images. This implementation 30607152b1d0Swdenkserves several purposes: 3061c609719bSwdenk 3062c609719bSwdenk- the same features can be used for other OS or standalone 3063c609719bSwdenk applications (for instance: using compressed images to reduce the 3064c609719bSwdenk Flash memory footprint) 3065c609719bSwdenk 3066c609719bSwdenk- it becomes much easier to port new Linux kernel versions because 30677152b1d0Swdenk lots of low-level, hardware dependent stuff are done by U-Boot 3068c609719bSwdenk 3069c609719bSwdenk- the same Linux kernel image can now be used with different "initrd" 3070c609719bSwdenk images; of course this also means that different kernel images can 3071c609719bSwdenk be run with the same "initrd". This makes testing easier (you don't 3072c609719bSwdenk have to build a new "zImage.initrd" Linux image when you just 3073c609719bSwdenk change a file in your "initrd"). Also, a field-upgrade of the 3074c609719bSwdenk software is easier now. 3075c609719bSwdenk 3076c609719bSwdenk 3077c609719bSwdenkLinux HOWTO: 3078c609719bSwdenk============ 3079c609719bSwdenk 3080c609719bSwdenkPorting Linux to U-Boot based systems: 3081c609719bSwdenk--------------------------------------- 3082c609719bSwdenk 3083c609719bSwdenkU-Boot cannot save you from doing all the necessary modifications to 3084c609719bSwdenkconfigure the Linux device drivers for use with your target hardware 3085c609719bSwdenk(no, we don't intend to provide a full virtual machine interface to 3086c609719bSwdenkLinux :-). 3087c609719bSwdenk 3088c609719bSwdenkBut now you can ignore ALL boot loader code (in arch/ppc/mbxboot). 3089c609719bSwdenk 3090c609719bSwdenkJust make sure your machine specific header file (for instance 3091c609719bSwdenkinclude/asm-ppc/tqm8xx.h) includes the same definition of the Board 3092c609719bSwdenkInformation structure as we define in include/u-boot.h, and make 3093c609719bSwdenksure that your definition of IMAP_ADDR uses the same value as your 3094c609719bSwdenkU-Boot configuration in CFG_IMMR. 3095c609719bSwdenk 3096c609719bSwdenk 3097c609719bSwdenkConfiguring the Linux kernel: 3098c609719bSwdenk----------------------------- 3099c609719bSwdenk 3100c609719bSwdenkNo specific requirements for U-Boot. Make sure you have some root 3101c609719bSwdenkdevice (initial ramdisk, NFS) for your target system. 3102c609719bSwdenk 3103c609719bSwdenk 3104c609719bSwdenkBuilding a Linux Image: 3105c609719bSwdenk----------------------- 3106c609719bSwdenk 310724ee89b9SwdenkWith U-Boot, "normal" build targets like "zImage" or "bzImage" are 310824ee89b9Swdenknot used. If you use recent kernel source, a new build target 310924ee89b9Swdenk"uImage" will exist which automatically builds an image usable by 311024ee89b9SwdenkU-Boot. Most older kernels also have support for a "pImage" target, 311124ee89b9Swdenkwhich was introduced for our predecessor project PPCBoot and uses a 311224ee89b9Swdenk100% compatible format. 3113c609719bSwdenk 3114c609719bSwdenkExample: 3115c609719bSwdenk 3116c609719bSwdenk make TQM850L_config 3117c609719bSwdenk make oldconfig 3118c609719bSwdenk make dep 311924ee89b9Swdenk make uImage 3120c609719bSwdenk 312124ee89b9SwdenkThe "uImage" build target uses a special tool (in 'tools/mkimage') to 312224ee89b9Swdenkencapsulate a compressed Linux kernel image with header information, 312324ee89b9SwdenkCRC32 checksum etc. for use with U-Boot. This is what we are doing: 3124c609719bSwdenk 312524ee89b9Swdenk* build a standard "vmlinux" kernel image (in ELF binary format): 312624ee89b9Swdenk 312724ee89b9Swdenk* convert the kernel into a raw binary image: 312824ee89b9Swdenk 312924ee89b9Swdenk ${CROSS_COMPILE}-objcopy -O binary \ 313024ee89b9Swdenk -R .note -R .comment \ 313124ee89b9Swdenk -S vmlinux linux.bin 313224ee89b9Swdenk 313324ee89b9Swdenk* compress the binary image: 313424ee89b9Swdenk 313524ee89b9Swdenk gzip -9 linux.bin 313624ee89b9Swdenk 313724ee89b9Swdenk* package compressed binary image for U-Boot: 313824ee89b9Swdenk 313924ee89b9Swdenk mkimage -A ppc -O linux -T kernel -C gzip \ 314024ee89b9Swdenk -a 0 -e 0 -n "Linux Kernel Image" \ 314124ee89b9Swdenk -d linux.bin.gz uImage 314224ee89b9Swdenk 314324ee89b9Swdenk 314424ee89b9SwdenkThe "mkimage" tool can also be used to create ramdisk images for use 314524ee89b9Swdenkwith U-Boot, either separated from the Linux kernel image, or 314624ee89b9Swdenkcombined into one file. "mkimage" encapsulates the images with a 64 314724ee89b9Swdenkbyte header containing information about target architecture, 314824ee89b9Swdenkoperating system, image type, compression method, entry points, time 314924ee89b9Swdenkstamp, CRC32 checksums, etc. 315024ee89b9Swdenk 315124ee89b9Swdenk"mkimage" can be called in two ways: to verify existing images and 315224ee89b9Swdenkprint the header information, or to build new images. 3153c609719bSwdenk 3154c609719bSwdenkIn the first form (with "-l" option) mkimage lists the information 3155c609719bSwdenkcontained in the header of an existing U-Boot image; this includes 3156c609719bSwdenkchecksum verification: 3157c609719bSwdenk 3158c609719bSwdenk tools/mkimage -l image 3159c609719bSwdenk -l ==> list image header information 3160c609719bSwdenk 3161c609719bSwdenkThe second form (with "-d" option) is used to build a U-Boot image 3162c609719bSwdenkfrom a "data file" which is used as image payload: 3163c609719bSwdenk 3164c609719bSwdenk tools/mkimage -A arch -O os -T type -C comp -a addr -e ep \ 3165c609719bSwdenk -n name -d data_file image 3166c609719bSwdenk -A ==> set architecture to 'arch' 3167c609719bSwdenk -O ==> set operating system to 'os' 3168c609719bSwdenk -T ==> set image type to 'type' 3169c609719bSwdenk -C ==> set compression type 'comp' 3170c609719bSwdenk -a ==> set load address to 'addr' (hex) 3171c609719bSwdenk -e ==> set entry point to 'ep' (hex) 3172c609719bSwdenk -n ==> set image name to 'name' 3173c609719bSwdenk -d ==> use image data from 'datafile' 3174c609719bSwdenk 317569459791SwdenkRight now, all Linux kernels for PowerPC systems use the same load 317669459791Swdenkaddress (0x00000000), but the entry point address depends on the 317769459791Swdenkkernel version: 3178c609719bSwdenk 3179c609719bSwdenk- 2.2.x kernels have the entry point at 0x0000000C, 318024ee89b9Swdenk- 2.3.x and later kernels have the entry point at 0x00000000. 3181c609719bSwdenk 3182c609719bSwdenkSo a typical call to build a U-Boot image would read: 3183c609719bSwdenk 318424ee89b9Swdenk -> tools/mkimage -n '2.4.4 kernel for TQM850L' \ 318524ee89b9Swdenk > -A ppc -O linux -T kernel -C gzip -a 0 -e 0 \ 318624ee89b9Swdenk > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/ppc/coffboot/vmlinux.gz \ 318724ee89b9Swdenk > examples/uImage.TQM850L 318824ee89b9Swdenk Image Name: 2.4.4 kernel for TQM850L 3189c609719bSwdenk Created: Wed Jul 19 02:34:59 2000 3190c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 3191c609719bSwdenk Data Size: 335725 Bytes = 327.86 kB = 0.32 MB 3192c609719bSwdenk Load Address: 0x00000000 319324ee89b9Swdenk Entry Point: 0x00000000 3194c609719bSwdenk 3195c609719bSwdenkTo verify the contents of the image (or check for corruption): 3196c609719bSwdenk 319724ee89b9Swdenk -> tools/mkimage -l examples/uImage.TQM850L 319824ee89b9Swdenk Image Name: 2.4.4 kernel for TQM850L 3199c609719bSwdenk Created: Wed Jul 19 02:34:59 2000 3200c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 3201c609719bSwdenk Data Size: 335725 Bytes = 327.86 kB = 0.32 MB 3202c609719bSwdenk Load Address: 0x00000000 320324ee89b9Swdenk Entry Point: 0x00000000 3204c609719bSwdenk 3205c609719bSwdenkNOTE: for embedded systems where boot time is critical you can trade 3206c609719bSwdenkspeed for memory and install an UNCOMPRESSED image instead: this 3207c609719bSwdenkneeds more space in Flash, but boots much faster since it does not 3208c609719bSwdenkneed to be uncompressed: 3209c609719bSwdenk 321024ee89b9Swdenk -> gunzip /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/ppc/coffboot/vmlinux.gz 321124ee89b9Swdenk -> tools/mkimage -n '2.4.4 kernel for TQM850L' \ 321224ee89b9Swdenk > -A ppc -O linux -T kernel -C none -a 0 -e 0 \ 321324ee89b9Swdenk > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/ppc/coffboot/vmlinux \ 321424ee89b9Swdenk > examples/uImage.TQM850L-uncompressed 321524ee89b9Swdenk Image Name: 2.4.4 kernel for TQM850L 3216c609719bSwdenk Created: Wed Jul 19 02:34:59 2000 3217c609719bSwdenk Image Type: PowerPC Linux Kernel Image (uncompressed) 3218c609719bSwdenk Data Size: 792160 Bytes = 773.59 kB = 0.76 MB 3219c609719bSwdenk Load Address: 0x00000000 322024ee89b9Swdenk Entry Point: 0x00000000 3221c609719bSwdenk 3222c609719bSwdenk 3223c609719bSwdenkSimilar you can build U-Boot images from a 'ramdisk.image.gz' file 3224c609719bSwdenkwhen your kernel is intended to use an initial ramdisk: 3225c609719bSwdenk 3226c609719bSwdenk -> tools/mkimage -n 'Simple Ramdisk Image' \ 3227c609719bSwdenk > -A ppc -O linux -T ramdisk -C gzip \ 3228c609719bSwdenk > -d /LinuxPPC/images/SIMPLE-ramdisk.image.gz examples/simple-initrd 3229c609719bSwdenk Image Name: Simple Ramdisk Image 3230c609719bSwdenk Created: Wed Jan 12 14:01:50 2000 3231c609719bSwdenk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) 3232c609719bSwdenk Data Size: 566530 Bytes = 553.25 kB = 0.54 MB 3233c609719bSwdenk Load Address: 0x00000000 3234c609719bSwdenk Entry Point: 0x00000000 3235c609719bSwdenk 3236c609719bSwdenk 3237c609719bSwdenkInstalling a Linux Image: 3238c609719bSwdenk------------------------- 3239c609719bSwdenk 3240c609719bSwdenkTo downloading a U-Boot image over the serial (console) interface, 3241c609719bSwdenkyou must convert the image to S-Record format: 3242c609719bSwdenk 3243c609719bSwdenk objcopy -I binary -O srec examples/image examples/image.srec 3244c609719bSwdenk 3245c609719bSwdenkThe 'objcopy' does not understand the information in the U-Boot 3246c609719bSwdenkimage header, so the resulting S-Record file will be relative to 3247c609719bSwdenkaddress 0x00000000. To load it to a given address, you need to 3248c609719bSwdenkspecify the target address as 'offset' parameter with the 'loads' 3249c609719bSwdenkcommand. 3250c609719bSwdenk 3251c609719bSwdenkExample: install the image to address 0x40100000 (which on the 3252c609719bSwdenkTQM8xxL is in the first Flash bank): 3253c609719bSwdenk 3254c609719bSwdenk => erase 40100000 401FFFFF 3255c609719bSwdenk 3256c609719bSwdenk .......... done 3257c609719bSwdenk Erased 8 sectors 3258c609719bSwdenk 3259c609719bSwdenk => loads 40100000 3260c609719bSwdenk ## Ready for S-Record download ... 3261c609719bSwdenk ~>examples/image.srec 3262c609719bSwdenk 1 2 3 4 5 6 7 8 9 10 11 12 13 ... 3263c609719bSwdenk ... 3264c609719bSwdenk 15989 15990 15991 15992 3265c609719bSwdenk [file transfer complete] 3266c609719bSwdenk [connected] 3267c609719bSwdenk ## Start Addr = 0x00000000 3268c609719bSwdenk 3269c609719bSwdenk 3270c609719bSwdenkYou can check the success of the download using the 'iminfo' command; 3271c609719bSwdenkthis includes a checksum verification so you can be sure no data 3272c609719bSwdenkcorruption happened: 3273c609719bSwdenk 3274c609719bSwdenk => imi 40100000 3275c609719bSwdenk 3276c609719bSwdenk ## Checking Image at 40100000 ... 3277c609719bSwdenk Image Name: 2.2.13 for initrd on TQM850L 3278c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 3279c609719bSwdenk Data Size: 335725 Bytes = 327 kB = 0 MB 3280c609719bSwdenk Load Address: 00000000 3281c609719bSwdenk Entry Point: 0000000c 3282c609719bSwdenk Verifying Checksum ... OK 3283c609719bSwdenk 3284c609719bSwdenk 3285c609719bSwdenkBoot Linux: 3286c609719bSwdenk----------- 3287c609719bSwdenk 3288c609719bSwdenkThe "bootm" command is used to boot an application that is stored in 3289c609719bSwdenkmemory (RAM or Flash). In case of a Linux kernel image, the contents 3290c609719bSwdenkof the "bootargs" environment variable is passed to the kernel as 3291c609719bSwdenkparameters. You can check and modify this variable using the 3292c609719bSwdenk"printenv" and "setenv" commands: 3293c609719bSwdenk 3294c609719bSwdenk 3295c609719bSwdenk => printenv bootargs 3296c609719bSwdenk bootargs=root=/dev/ram 3297c609719bSwdenk 3298c609719bSwdenk => setenv bootargs root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 3299c609719bSwdenk 3300c609719bSwdenk => printenv bootargs 3301c609719bSwdenk bootargs=root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 3302c609719bSwdenk 3303c609719bSwdenk => bootm 40020000 3304c609719bSwdenk ## Booting Linux kernel at 40020000 ... 3305c609719bSwdenk Image Name: 2.2.13 for NFS on TQM850L 3306c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 3307c609719bSwdenk Data Size: 381681 Bytes = 372 kB = 0 MB 3308c609719bSwdenk Load Address: 00000000 3309c609719bSwdenk Entry Point: 0000000c 3310c609719bSwdenk Verifying Checksum ... OK 3311c609719bSwdenk Uncompressing Kernel Image ... OK 3312c609719bSwdenk Linux version 2.2.13 (wd@denx.local.net) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 19 02:35:17 MEST 2000 3313c609719bSwdenk Boot arguments: root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 3314c609719bSwdenk time_init: decrementer frequency = 187500000/60 3315c609719bSwdenk Calibrating delay loop... 49.77 BogoMIPS 3316c609719bSwdenk Memory: 15208k available (700k kernel code, 444k data, 32k init) [c0000000,c1000000] 3317c609719bSwdenk ... 3318c609719bSwdenk 331911ccc33fSMarcel ZiswilerIf you want to boot a Linux kernel with initial RAM disk, you pass 33207152b1d0Swdenkthe memory addresses of both the kernel and the initrd image (PPBCOOT 3321c609719bSwdenkformat!) to the "bootm" command: 3322c609719bSwdenk 3323c609719bSwdenk => imi 40100000 40200000 3324c609719bSwdenk 3325c609719bSwdenk ## Checking Image at 40100000 ... 3326c609719bSwdenk Image Name: 2.2.13 for initrd on TQM850L 3327c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 3328c609719bSwdenk Data Size: 335725 Bytes = 327 kB = 0 MB 3329c609719bSwdenk Load Address: 00000000 3330c609719bSwdenk Entry Point: 0000000c 3331c609719bSwdenk Verifying Checksum ... OK 3332c609719bSwdenk 3333c609719bSwdenk ## Checking Image at 40200000 ... 3334c609719bSwdenk Image Name: Simple Ramdisk Image 3335c609719bSwdenk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) 3336c609719bSwdenk Data Size: 566530 Bytes = 553 kB = 0 MB 3337c609719bSwdenk Load Address: 00000000 3338c609719bSwdenk Entry Point: 00000000 3339c609719bSwdenk Verifying Checksum ... OK 3340c609719bSwdenk 3341c609719bSwdenk => bootm 40100000 40200000 3342c609719bSwdenk ## Booting Linux kernel at 40100000 ... 3343c609719bSwdenk Image Name: 2.2.13 for initrd on TQM850L 3344c609719bSwdenk Image Type: PowerPC Linux Kernel Image (gzip compressed) 3345c609719bSwdenk Data Size: 335725 Bytes = 327 kB = 0 MB 3346c609719bSwdenk Load Address: 00000000 3347c609719bSwdenk Entry Point: 0000000c 3348c609719bSwdenk Verifying Checksum ... OK 3349c609719bSwdenk Uncompressing Kernel Image ... OK 3350c609719bSwdenk ## Loading RAMDisk Image at 40200000 ... 3351c609719bSwdenk Image Name: Simple Ramdisk Image 3352c609719bSwdenk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) 3353c609719bSwdenk Data Size: 566530 Bytes = 553 kB = 0 MB 3354c609719bSwdenk Load Address: 00000000 3355c609719bSwdenk Entry Point: 00000000 3356c609719bSwdenk Verifying Checksum ... OK 3357c609719bSwdenk Loading Ramdisk ... OK 3358c609719bSwdenk Linux version 2.2.13 (wd@denx.local.net) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 19 02:32:08 MEST 2000 3359c609719bSwdenk Boot arguments: root=/dev/ram 3360c609719bSwdenk time_init: decrementer frequency = 187500000/60 3361c609719bSwdenk Calibrating delay loop... 49.77 BogoMIPS 3362c609719bSwdenk ... 3363c609719bSwdenk RAMDISK: Compressed image found at block 0 3364c609719bSwdenk VFS: Mounted root (ext2 filesystem). 3365c609719bSwdenk 3366c609719bSwdenk bash# 3367c609719bSwdenk 33680267768eSMatthew McClintockBoot Linux and pass a flat device tree: 33690267768eSMatthew McClintock----------- 33700267768eSMatthew McClintock 33710267768eSMatthew McClintockFirst, U-Boot must be compiled with the appropriate defines. See the section 33720267768eSMatthew McClintocktitled "Linux Kernel Interface" above for a more in depth explanation. The 33730267768eSMatthew McClintockfollowing is an example of how to start a kernel and pass an updated 33740267768eSMatthew McClintockflat device tree: 33750267768eSMatthew McClintock 33760267768eSMatthew McClintock=> print oftaddr 33770267768eSMatthew McClintockoftaddr=0x300000 33780267768eSMatthew McClintock=> print oft 33790267768eSMatthew McClintockoft=oftrees/mpc8540ads.dtb 33800267768eSMatthew McClintock=> tftp $oftaddr $oft 33810267768eSMatthew McClintockSpeed: 1000, full duplex 33820267768eSMatthew McClintockUsing TSEC0 device 33830267768eSMatthew McClintockTFTP from server 192.168.1.1; our IP address is 192.168.1.101 33840267768eSMatthew McClintockFilename 'oftrees/mpc8540ads.dtb'. 33850267768eSMatthew McClintockLoad address: 0x300000 33860267768eSMatthew McClintockLoading: # 33870267768eSMatthew McClintockdone 33880267768eSMatthew McClintockBytes transferred = 4106 (100a hex) 33890267768eSMatthew McClintock=> tftp $loadaddr $bootfile 33900267768eSMatthew McClintockSpeed: 1000, full duplex 33910267768eSMatthew McClintockUsing TSEC0 device 33920267768eSMatthew McClintockTFTP from server 192.168.1.1; our IP address is 192.168.1.2 33930267768eSMatthew McClintockFilename 'uImage'. 33940267768eSMatthew McClintockLoad address: 0x200000 33950267768eSMatthew McClintockLoading:############ 33960267768eSMatthew McClintockdone 33970267768eSMatthew McClintockBytes transferred = 1029407 (fb51f hex) 33980267768eSMatthew McClintock=> print loadaddr 33990267768eSMatthew McClintockloadaddr=200000 34000267768eSMatthew McClintock=> print oftaddr 34010267768eSMatthew McClintockoftaddr=0x300000 34020267768eSMatthew McClintock=> bootm $loadaddr - $oftaddr 34030267768eSMatthew McClintock## Booting image at 00200000 ... 34040267768eSMatthew McClintock Image Name: Linux-2.6.17-dirty 34050267768eSMatthew McClintock Image Type: PowerPC Linux Kernel Image (gzip compressed) 34060267768eSMatthew McClintock Data Size: 1029343 Bytes = 1005.2 kB 34070267768eSMatthew McClintock Load Address: 00000000 34080267768eSMatthew McClintock Entry Point: 00000000 34090267768eSMatthew McClintock Verifying Checksum ... OK 34100267768eSMatthew McClintock Uncompressing Kernel Image ... OK 34110267768eSMatthew McClintockBooting using flat device tree at 0x300000 34120267768eSMatthew McClintockUsing MPC85xx ADS machine description 34130267768eSMatthew McClintockMemory CAM mapping: CAM0=256Mb, CAM1=256Mb, CAM2=0Mb residual: 0Mb 34140267768eSMatthew McClintock[snip] 34150267768eSMatthew McClintock 34160267768eSMatthew McClintock 34176069ff26SwdenkMore About U-Boot Image Types: 34186069ff26Swdenk------------------------------ 34196069ff26Swdenk 34206069ff26SwdenkU-Boot supports the following image types: 34216069ff26Swdenk 34226069ff26Swdenk "Standalone Programs" are directly runnable in the environment 34236069ff26Swdenk provided by U-Boot; it is expected that (if they behave 34246069ff26Swdenk well) you can continue to work in U-Boot after return from 34256069ff26Swdenk the Standalone Program. 34266069ff26Swdenk "OS Kernel Images" are usually images of some Embedded OS which 34276069ff26Swdenk will take over control completely. Usually these programs 34286069ff26Swdenk will install their own set of exception handlers, device 34296069ff26Swdenk drivers, set up the MMU, etc. - this means, that you cannot 34306069ff26Swdenk expect to re-enter U-Boot except by resetting the CPU. 34316069ff26Swdenk "RAMDisk Images" are more or less just data blocks, and their 34326069ff26Swdenk parameters (address, size) are passed to an OS kernel that is 34336069ff26Swdenk being started. 34346069ff26Swdenk "Multi-File Images" contain several images, typically an OS 34356069ff26Swdenk (Linux) kernel image and one or more data images like 34366069ff26Swdenk RAMDisks. This construct is useful for instance when you want 34376069ff26Swdenk to boot over the network using BOOTP etc., where the boot 34386069ff26Swdenk server provides just a single image file, but you want to get 34396069ff26Swdenk for instance an OS kernel and a RAMDisk image. 34406069ff26Swdenk 34416069ff26Swdenk "Multi-File Images" start with a list of image sizes, each 34426069ff26Swdenk image size (in bytes) specified by an "uint32_t" in network 34436069ff26Swdenk byte order. This list is terminated by an "(uint32_t)0". 34446069ff26Swdenk Immediately after the terminating 0 follow the images, one by 34456069ff26Swdenk one, all aligned on "uint32_t" boundaries (size rounded up to 34466069ff26Swdenk a multiple of 4 bytes). 34476069ff26Swdenk 34486069ff26Swdenk "Firmware Images" are binary images containing firmware (like 34496069ff26Swdenk U-Boot or FPGA images) which usually will be programmed to 34506069ff26Swdenk flash memory. 34516069ff26Swdenk 34526069ff26Swdenk "Script files" are command sequences that will be executed by 34536069ff26Swdenk U-Boot's command interpreter; this feature is especially 34546069ff26Swdenk useful when you configure U-Boot to use a real shell (hush) 34556069ff26Swdenk as command interpreter. 34566069ff26Swdenk 3457c609719bSwdenk 3458c609719bSwdenkStandalone HOWTO: 3459c609719bSwdenk================= 3460c609719bSwdenk 3461c609719bSwdenkOne of the features of U-Boot is that you can dynamically load and 3462c609719bSwdenkrun "standalone" applications, which can use some resources of 3463c609719bSwdenkU-Boot like console I/O functions or interrupt services. 3464c609719bSwdenk 3465c609719bSwdenkTwo simple examples are included with the sources: 3466c609719bSwdenk 3467c609719bSwdenk"Hello World" Demo: 3468c609719bSwdenk------------------- 3469c609719bSwdenk 3470c609719bSwdenk'examples/hello_world.c' contains a small "Hello World" Demo 3471c609719bSwdenkapplication; it is automatically compiled when you build U-Boot. 3472c609719bSwdenkIt's configured to run at address 0x00040004, so you can play with it 3473c609719bSwdenklike that: 3474c609719bSwdenk 3475c609719bSwdenk => loads 3476c609719bSwdenk ## Ready for S-Record download ... 3477c609719bSwdenk ~>examples/hello_world.srec 3478c609719bSwdenk 1 2 3 4 5 6 7 8 9 10 11 ... 3479c609719bSwdenk [file transfer complete] 3480c609719bSwdenk [connected] 3481c609719bSwdenk ## Start Addr = 0x00040004 3482c609719bSwdenk 3483c609719bSwdenk => go 40004 Hello World! This is a test. 3484c609719bSwdenk ## Starting application at 0x00040004 ... 3485c609719bSwdenk Hello World 3486c609719bSwdenk argc = 7 3487c609719bSwdenk argv[0] = "40004" 3488c609719bSwdenk argv[1] = "Hello" 3489c609719bSwdenk argv[2] = "World!" 3490c609719bSwdenk argv[3] = "This" 3491c609719bSwdenk argv[4] = "is" 3492c609719bSwdenk argv[5] = "a" 3493c609719bSwdenk argv[6] = "test." 3494c609719bSwdenk argv[7] = "<NULL>" 3495c609719bSwdenk Hit any key to exit ... 3496c609719bSwdenk 3497c609719bSwdenk ## Application terminated, rc = 0x0 3498c609719bSwdenk 3499c609719bSwdenkAnother example, which demonstrates how to register a CPM interrupt 3500c609719bSwdenkhandler with the U-Boot code, can be found in 'examples/timer.c'. 3501c609719bSwdenkHere, a CPM timer is set up to generate an interrupt every second. 3502c609719bSwdenkThe interrupt service routine is trivial, just printing a '.' 3503c609719bSwdenkcharacter, but this is just a demo program. The application can be 3504c609719bSwdenkcontrolled by the following keys: 3505c609719bSwdenk 3506c609719bSwdenk ? - print current values og the CPM Timer registers 3507c609719bSwdenk b - enable interrupts and start timer 3508c609719bSwdenk e - stop timer and disable interrupts 3509c609719bSwdenk q - quit application 3510c609719bSwdenk 3511c609719bSwdenk => loads 3512c609719bSwdenk ## Ready for S-Record download ... 3513c609719bSwdenk ~>examples/timer.srec 3514c609719bSwdenk 1 2 3 4 5 6 7 8 9 10 11 ... 3515c609719bSwdenk [file transfer complete] 3516c609719bSwdenk [connected] 3517c609719bSwdenk ## Start Addr = 0x00040004 3518c609719bSwdenk 3519c609719bSwdenk => go 40004 3520c609719bSwdenk ## Starting application at 0x00040004 ... 3521c609719bSwdenk TIMERS=0xfff00980 3522c609719bSwdenk Using timer 1 3523c609719bSwdenk tgcr @ 0xfff00980, tmr @ 0xfff00990, trr @ 0xfff00994, tcr @ 0xfff00998, tcn @ 0xfff0099c, ter @ 0xfff009b0 3524c609719bSwdenk 3525c609719bSwdenkHit 'b': 3526c609719bSwdenk [q, b, e, ?] Set interval 1000000 us 3527c609719bSwdenk Enabling timer 3528c609719bSwdenkHit '?': 3529c609719bSwdenk [q, b, e, ?] ........ 3530c609719bSwdenk tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0xef6, ter=0x0 3531c609719bSwdenkHit '?': 3532c609719bSwdenk [q, b, e, ?] . 3533c609719bSwdenk tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x2ad4, ter=0x0 3534c609719bSwdenkHit '?': 3535c609719bSwdenk [q, b, e, ?] . 3536c609719bSwdenk tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x1efc, ter=0x0 3537c609719bSwdenkHit '?': 3538c609719bSwdenk [q, b, e, ?] . 3539c609719bSwdenk tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x169d, ter=0x0 3540c609719bSwdenkHit 'e': 3541c609719bSwdenk [q, b, e, ?] ...Stopping timer 3542c609719bSwdenkHit 'q': 3543c609719bSwdenk [q, b, e, ?] ## Application terminated, rc = 0x0 3544c609719bSwdenk 3545c609719bSwdenk 354685ec0bccSwdenkMinicom warning: 354785ec0bccSwdenk================ 354885ec0bccSwdenk 35497152b1d0SwdenkOver time, many people have reported problems when trying to use the 355085ec0bccSwdenk"minicom" terminal emulation program for serial download. I (wd) 355185ec0bccSwdenkconsider minicom to be broken, and recommend not to use it. Under 3552f07771ccSwdenkUnix, I recommend to use C-Kermit for general purpose use (and 355385ec0bccSwdenkespecially for kermit binary protocol download ("loadb" command), and 355485ec0bccSwdenkuse "cu" for S-Record download ("loads" command). 355585ec0bccSwdenk 355652f52c14SwdenkNevertheless, if you absolutely want to use it try adding this 355752f52c14Swdenkconfiguration to your "File transfer protocols" section: 355852f52c14Swdenk 355952f52c14Swdenk Name Program Name U/D FullScr IO-Red. Multi 356052f52c14Swdenk X kermit /usr/bin/kermit -i -l %l -s Y U Y N N 356152f52c14Swdenk Y kermit /usr/bin/kermit -i -l %l -r N D Y N N 356252f52c14Swdenk 356352f52c14Swdenk 3564c609719bSwdenkNetBSD Notes: 3565c609719bSwdenk============= 3566c609719bSwdenk 3567c609719bSwdenkStarting at version 0.9.2, U-Boot supports NetBSD both as host 3568c609719bSwdenk(build U-Boot) and target system (boots NetBSD/mpc8xx). 3569c609719bSwdenk 3570c609719bSwdenkBuilding requires a cross environment; it is known to work on 3571c609719bSwdenkNetBSD/i386 with the cross-powerpc-netbsd-1.3 package (you will also 3572c609719bSwdenkneed gmake since the Makefiles are not compatible with BSD make). 3573c609719bSwdenkNote that the cross-powerpc package does not install include files; 3574c609719bSwdenkattempting to build U-Boot will fail because <machine/ansi.h> is 3575c609719bSwdenkmissing. This file has to be installed and patched manually: 3576c609719bSwdenk 3577c609719bSwdenk # cd /usr/pkg/cross/powerpc-netbsd/include 3578c609719bSwdenk # mkdir powerpc 3579c609719bSwdenk # ln -s powerpc machine 3580c609719bSwdenk # cp /usr/src/sys/arch/powerpc/include/ansi.h powerpc/ansi.h 3581c609719bSwdenk # ${EDIT} powerpc/ansi.h ## must remove __va_list, _BSD_VA_LIST 3582c609719bSwdenk 3583c609719bSwdenkNative builds *don't* work due to incompatibilities between native 3584c609719bSwdenkand U-Boot include files. 3585c609719bSwdenk 3586c609719bSwdenkBooting assumes that (the first part of) the image booted is a 3587c609719bSwdenkstage-2 loader which in turn loads and then invokes the kernel 3588c609719bSwdenkproper. Loader sources will eventually appear in the NetBSD source 3589c609719bSwdenktree (probably in sys/arc/mpc8xx/stand/u-boot_stage2/); in the 35902a8af187Swdenkmeantime, see ftp://ftp.denx.de/pub/u-boot/ppcboot_stage2.tar.gz 3591c609719bSwdenk 3592c609719bSwdenk 3593c609719bSwdenkImplementation Internals: 3594c609719bSwdenk========================= 3595c609719bSwdenk 3596c609719bSwdenkThe following is not intended to be a complete description of every 3597c609719bSwdenkimplementation detail. However, it should help to understand the 3598c609719bSwdenkinner workings of U-Boot and make it easier to port it to custom 3599c609719bSwdenkhardware. 3600c609719bSwdenk 3601c609719bSwdenk 3602c609719bSwdenkInitial Stack, Global Data: 3603c609719bSwdenk--------------------------- 3604c609719bSwdenk 3605c609719bSwdenkThe implementation of U-Boot is complicated by the fact that U-Boot 3606c609719bSwdenkstarts running out of ROM (flash memory), usually without access to 3607c609719bSwdenksystem RAM (because the memory controller is not initialized yet). 3608c609719bSwdenkThis means that we don't have writable Data or BSS segments, and BSS 3609c609719bSwdenkis not initialized as zero. To be able to get a C environment working 3610c609719bSwdenkat all, we have to allocate at least a minimal stack. Implementation 3611c609719bSwdenkoptions for this are defined and restricted by the CPU used: Some CPU 3612c609719bSwdenkmodels provide on-chip memory (like the IMMR area on MPC8xx and 3613c609719bSwdenkMPC826x processors), on others (parts of) the data cache can be 3614c609719bSwdenklocked as (mis-) used as memory, etc. 3615c609719bSwdenk 36167152b1d0Swdenk Chris Hallinan posted a good summary of these issues to the 361743d9616cSwdenk u-boot-users mailing list: 361843d9616cSwdenk 361943d9616cSwdenk Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)? 362043d9616cSwdenk From: "Chris Hallinan" <clh@net1plus.com> 362143d9616cSwdenk Date: Mon, 10 Feb 2003 16:43:46 -0500 (22:43 MET) 362243d9616cSwdenk ... 362343d9616cSwdenk 362443d9616cSwdenk Correct me if I'm wrong, folks, but the way I understand it 362543d9616cSwdenk is this: Using DCACHE as initial RAM for Stack, etc, does not 362643d9616cSwdenk require any physical RAM backing up the cache. The cleverness 362743d9616cSwdenk is that the cache is being used as a temporary supply of 362843d9616cSwdenk necessary storage before the SDRAM controller is setup. It's 362911ccc33fSMarcel Ziswiler beyond the scope of this list to explain the details, but you 363043d9616cSwdenk can see how this works by studying the cache architecture and 363143d9616cSwdenk operation in the architecture and processor-specific manuals. 363243d9616cSwdenk 363343d9616cSwdenk OCM is On Chip Memory, which I believe the 405GP has 4K. It 363443d9616cSwdenk is another option for the system designer to use as an 363511ccc33fSMarcel Ziswiler initial stack/RAM area prior to SDRAM being available. Either 363643d9616cSwdenk option should work for you. Using CS 4 should be fine if your 363743d9616cSwdenk board designers haven't used it for something that would 363843d9616cSwdenk cause you grief during the initial boot! It is frequently not 363943d9616cSwdenk used. 364043d9616cSwdenk 364143d9616cSwdenk CFG_INIT_RAM_ADDR should be somewhere that won't interfere 364243d9616cSwdenk with your processor/board/system design. The default value 364343d9616cSwdenk you will find in any recent u-boot distribution in 36448a316c9bSStefan Roese walnut.h should work for you. I'd set it to a value larger 364543d9616cSwdenk than your SDRAM module. If you have a 64MB SDRAM module, set 364643d9616cSwdenk it above 400_0000. Just make sure your board has no resources 364743d9616cSwdenk that are supposed to respond to that address! That code in 364843d9616cSwdenk start.S has been around a while and should work as is when 364943d9616cSwdenk you get the config right. 365043d9616cSwdenk 365143d9616cSwdenk -Chris Hallinan 365243d9616cSwdenk DS4.COM, Inc. 365343d9616cSwdenk 3654c609719bSwdenkIt is essential to remember this, since it has some impact on the C 3655c609719bSwdenkcode for the initialization procedures: 3656c609719bSwdenk 3657c609719bSwdenk* Initialized global data (data segment) is read-only. Do not attempt 3658c609719bSwdenk to write it. 3659c609719bSwdenk 366011ccc33fSMarcel Ziswiler* Do not use any uninitialized global data (or implicitely initialized 3661c609719bSwdenk as zero data - BSS segment) at all - this is undefined, initiali- 36627152b1d0Swdenk zation is performed later (when relocating to RAM). 3663c609719bSwdenk 3664c609719bSwdenk* Stack space is very limited. Avoid big data buffers or things like 3665c609719bSwdenk that. 3666c609719bSwdenk 3667c609719bSwdenkHaving only the stack as writable memory limits means we cannot use 3668c609719bSwdenknormal global data to share information beween the code. But it 3669c609719bSwdenkturned out that the implementation of U-Boot can be greatly 3670c609719bSwdenksimplified by making a global data structure (gd_t) available to all 3671c609719bSwdenkfunctions. We could pass a pointer to this data as argument to _all_ 3672c609719bSwdenkfunctions, but this would bloat the code. Instead we use a feature of 3673c609719bSwdenkthe GCC compiler (Global Register Variables) to share the data: we 3674c609719bSwdenkplace a pointer (gd) to the global data into a register which we 3675c609719bSwdenkreserve for this purpose. 3676c609719bSwdenk 36777152b1d0SwdenkWhen choosing a register for such a purpose we are restricted by the 3678c609719bSwdenkrelevant (E)ABI specifications for the current architecture, and by 3679c609719bSwdenkGCC's implementation. 3680c609719bSwdenk 3681c609719bSwdenkFor PowerPC, the following registers have specific use: 3682c609719bSwdenk R1: stack pointer 3683e7670f6cSWolfgang Denk R2: reserved for system use 3684c609719bSwdenk R3-R4: parameter passing and return values 3685c609719bSwdenk R5-R10: parameter passing 3686c609719bSwdenk R13: small data area pointer 3687c609719bSwdenk R30: GOT pointer 3688c609719bSwdenk R31: frame pointer 3689c609719bSwdenk 3690c609719bSwdenk (U-Boot also uses R14 as internal GOT pointer.) 3691c609719bSwdenk 3692e7670f6cSWolfgang Denk ==> U-Boot will use R2 to hold a pointer to the global data 3693c609719bSwdenk 3694c609719bSwdenk Note: on PPC, we could use a static initializer (since the 3695c609719bSwdenk address of the global data structure is known at compile time), 3696c609719bSwdenk but it turned out that reserving a register results in somewhat 3697c609719bSwdenk smaller code - although the code savings are not that big (on 3698c609719bSwdenk average for all boards 752 bytes for the whole U-Boot image, 3699c609719bSwdenk 624 text + 127 data). 3700c609719bSwdenk 37014c58eb55SMike FrysingerOn Blackfin, the normal C ABI (except for P5) is followed as documented here: 37024c58eb55SMike Frysinger http://docs.blackfin.uclinux.org/doku.php?id=application_binary_interface 37034c58eb55SMike Frysinger 37044c58eb55SMike Frysinger ==> U-Boot will use P5 to hold a pointer to the global data 37054c58eb55SMike Frysinger 3706c609719bSwdenkOn ARM, the following registers are used: 3707c609719bSwdenk 3708c609719bSwdenk R0: function argument word/integer result 3709c609719bSwdenk R1-R3: function argument word 3710c609719bSwdenk R9: GOT pointer 3711c609719bSwdenk R10: stack limit (used only if stack checking if enabled) 3712c609719bSwdenk R11: argument (frame) pointer 3713c609719bSwdenk R12: temporary workspace 3714c609719bSwdenk R13: stack pointer 3715c609719bSwdenk R14: link register 3716c609719bSwdenk R15: program counter 3717c609719bSwdenk 3718c609719bSwdenk ==> U-Boot will use R8 to hold a pointer to the global data 3719c609719bSwdenk 3720d87080b7SWolfgang DenkNOTE: DECLARE_GLOBAL_DATA_PTR must be used with file-global scope, 3721d87080b7SWolfgang Denkor current versions of GCC may "optimize" the code too much. 3722c609719bSwdenk 3723c609719bSwdenkMemory Management: 3724c609719bSwdenk------------------ 3725c609719bSwdenk 3726c609719bSwdenkU-Boot runs in system state and uses physical addresses, i.e. the 3727c609719bSwdenkMMU is not used either for address mapping nor for memory protection. 3728c609719bSwdenk 3729c609719bSwdenkThe available memory is mapped to fixed addresses using the memory 3730c609719bSwdenkcontroller. In this process, a contiguous block is formed for each 3731c609719bSwdenkmemory type (Flash, SDRAM, SRAM), even when it consists of several 3732c609719bSwdenkphysical memory banks. 3733c609719bSwdenk 3734c609719bSwdenkU-Boot is installed in the first 128 kB of the first Flash bank (on 3735c609719bSwdenkTQM8xxL modules this is the range 0x40000000 ... 0x4001FFFF). After 3736c609719bSwdenkbooting and sizing and initializing DRAM, the code relocates itself 3737c609719bSwdenkto the upper end of DRAM. Immediately below the U-Boot code some 3738c609719bSwdenkmemory is reserved for use by malloc() [see CFG_MALLOC_LEN 3739c609719bSwdenkconfiguration setting]. Below that, a structure with global Board 3740c609719bSwdenkInfo data is placed, followed by the stack (growing downward). 3741c609719bSwdenk 3742c609719bSwdenkAdditionally, some exception handler code is copied to the low 8 kB 3743c609719bSwdenkof DRAM (0x00000000 ... 0x00001FFF). 3744c609719bSwdenk 3745c609719bSwdenkSo a typical memory configuration with 16 MB of DRAM could look like 3746c609719bSwdenkthis: 3747c609719bSwdenk 3748c609719bSwdenk 0x0000 0000 Exception Vector code 3749c609719bSwdenk : 3750c609719bSwdenk 0x0000 1FFF 3751c609719bSwdenk 0x0000 2000 Free for Application Use 3752c609719bSwdenk : 3753c609719bSwdenk : 3754c609719bSwdenk 3755c609719bSwdenk : 3756c609719bSwdenk : 3757c609719bSwdenk 0x00FB FF20 Monitor Stack (Growing downward) 3758c609719bSwdenk 0x00FB FFAC Board Info Data and permanent copy of global data 3759c609719bSwdenk 0x00FC 0000 Malloc Arena 3760c609719bSwdenk : 3761c609719bSwdenk 0x00FD FFFF 3762c609719bSwdenk 0x00FE 0000 RAM Copy of Monitor Code 3763c609719bSwdenk ... eventually: LCD or video framebuffer 3764c609719bSwdenk ... eventually: pRAM (Protected RAM - unchanged by reset) 3765c609719bSwdenk 0x00FF FFFF [End of RAM] 3766c609719bSwdenk 3767c609719bSwdenk 3768c609719bSwdenkSystem Initialization: 3769c609719bSwdenk---------------------- 3770c609719bSwdenk 3771c609719bSwdenkIn the reset configuration, U-Boot starts at the reset entry point 377211ccc33fSMarcel Ziswiler(on most PowerPC systems at address 0x00000100). Because of the reset 3773c609719bSwdenkconfiguration for CS0# this is a mirror of the onboard Flash memory. 37747152b1d0SwdenkTo be able to re-map memory U-Boot then jumps to its link address. 3775c609719bSwdenkTo be able to implement the initialization code in C, a (small!) 3776c609719bSwdenkinitial stack is set up in the internal Dual Ported RAM (in case CPUs 3777c609719bSwdenkwhich provide such a feature like MPC8xx or MPC8260), or in a locked 3778c609719bSwdenkpart of the data cache. After that, U-Boot initializes the CPU core, 3779c609719bSwdenkthe caches and the SIU. 3780c609719bSwdenk 3781c609719bSwdenkNext, all (potentially) available memory banks are mapped using a 3782c609719bSwdenkpreliminary mapping. For example, we put them on 512 MB boundaries 3783c609719bSwdenk(multiples of 0x20000000: SDRAM on 0x00000000 and 0x20000000, Flash 3784c609719bSwdenkon 0x40000000 and 0x60000000, SRAM on 0x80000000). Then UPM A is 3785c609719bSwdenkprogrammed for SDRAM access. Using the temporary configuration, a 3786c609719bSwdenksimple memory test is run that determines the size of the SDRAM 3787c609719bSwdenkbanks. 3788c609719bSwdenk 3789c609719bSwdenkWhen there is more than one SDRAM bank, and the banks are of 37907152b1d0Swdenkdifferent size, the largest is mapped first. For equal size, the first 3791c609719bSwdenkbank (CS2#) is mapped first. The first mapping is always for address 3792c609719bSwdenk0x00000000, with any additional banks following immediately to create 3793c609719bSwdenkcontiguous memory starting from 0. 3794c609719bSwdenk 3795c609719bSwdenkThen, the monitor installs itself at the upper end of the SDRAM area 3796c609719bSwdenkand allocates memory for use by malloc() and for the global Board 3797c609719bSwdenkInfo data; also, the exception vector code is copied to the low RAM 3798c609719bSwdenkpages, and the final stack is set up. 3799c609719bSwdenk 3800c609719bSwdenkOnly after this relocation will you have a "normal" C environment; 3801c609719bSwdenkuntil that you are restricted in several ways, mostly because you are 3802c609719bSwdenkrunning from ROM, and because the code will have to be relocated to a 3803c609719bSwdenknew address in RAM. 3804c609719bSwdenk 3805c609719bSwdenk 3806c609719bSwdenkU-Boot Porting Guide: 3807c609719bSwdenk---------------------- 3808c609719bSwdenk 3809c609719bSwdenk[Based on messages by Jerry Van Baren in the U-Boot-Users mailing 38106aff3115Swdenklist, October 2002] 3811c609719bSwdenk 3812c609719bSwdenk 3813c609719bSwdenkint main (int argc, char *argv[]) 3814c609719bSwdenk{ 3815c609719bSwdenk sighandler_t no_more_time; 3816c609719bSwdenk 3817c609719bSwdenk signal (SIGALRM, no_more_time); 3818c609719bSwdenk alarm (PROJECT_DEADLINE - toSec (3 * WEEK)); 3819c609719bSwdenk 3820c609719bSwdenk if (available_money > available_manpower) { 3821c609719bSwdenk pay consultant to port U-Boot; 3822c609719bSwdenk return 0; 3823c609719bSwdenk } 3824c609719bSwdenk 3825c609719bSwdenk Download latest U-Boot source; 3826c609719bSwdenk 38276aff3115Swdenk Subscribe to u-boot-users mailing list; 38286aff3115Swdenk 3829c609719bSwdenk if (clueless) { 3830c609719bSwdenk email ("Hi, I am new to U-Boot, how do I get started?"); 3831c609719bSwdenk } 3832c609719bSwdenk 3833c609719bSwdenk while (learning) { 3834c609719bSwdenk Read the README file in the top level directory; 38357cb22f97Swdenk Read http://www.denx.de/twiki/bin/view/DULG/Manual ; 3836c609719bSwdenk Read the source, Luke; 3837c609719bSwdenk } 3838c609719bSwdenk 3839c609719bSwdenk if (available_money > toLocalCurrency ($2500)) { 3840c609719bSwdenk Buy a BDI2000; 3841c609719bSwdenk } else { 3842c609719bSwdenk Add a lot of aggravation and time; 3843c609719bSwdenk } 3844c609719bSwdenk 3845c609719bSwdenk Create your own board support subdirectory; 3846c609719bSwdenk 38476aff3115Swdenk Create your own board config file; 38486aff3115Swdenk 3849c609719bSwdenk while (!running) { 3850c609719bSwdenk do { 3851c609719bSwdenk Add / modify source code; 3852c609719bSwdenk } until (compiles); 3853c609719bSwdenk Debug; 3854c609719bSwdenk if (clueless) 3855c609719bSwdenk email ("Hi, I am having problems..."); 3856c609719bSwdenk } 3857c609719bSwdenk Send patch file to Wolfgang; 3858c609719bSwdenk 3859c609719bSwdenk return 0; 3860c609719bSwdenk} 3861c609719bSwdenk 3862c609719bSwdenkvoid no_more_time (int sig) 3863c609719bSwdenk{ 3864c609719bSwdenk hire_a_guru(); 3865c609719bSwdenk} 3866c609719bSwdenk 3867c609719bSwdenk 3868c609719bSwdenkCoding Standards: 3869c609719bSwdenk----------------- 3870c609719bSwdenk 3871c609719bSwdenkAll contributions to U-Boot should conform to the Linux kernel 38722c051651SDetlev Zundelcoding style; see the file "Documentation/CodingStyle" and the script 38732c051651SDetlev Zundel"scripts/Lindent" in your Linux kernel source directory. In sources 38742c051651SDetlev Zundeloriginating from U-Boot a style corresponding to "Lindent -pcs" (adding 38752c051651SDetlev Zundelspaces before parameters to function calls) is actually used. 3876c609719bSwdenk 38772c051651SDetlev ZundelSource files originating from a different project (for example the 38782c051651SDetlev ZundelMTD subsystem) are generally exempt from these guidelines and are not 38792c051651SDetlev Zundelreformated to ease subsequent migration to newer versions of those 38802c051651SDetlev Zundelsources. 38812c051651SDetlev Zundel 38822c051651SDetlev ZundelPlease note that U-Boot is implemented in C (and to some small parts in 38832c051651SDetlev ZundelAssembler); no C++ is used, so please do not use C++ style comments (//) 38842c051651SDetlev Zundelin your code. 3885c609719bSwdenk 3886c178d3daSwdenkPlease also stick to the following formatting rules: 3887180d3f74Swdenk- remove any trailing white space 3888180d3f74Swdenk- use TAB characters for indentation, not spaces 3889180d3f74Swdenk- make sure NOT to use DOS '\r\n' line feeds 3890180d3f74Swdenk- do not add more than 2 empty lines to source files 3891180d3f74Swdenk- do not add trailing empty lines to source files 3892180d3f74Swdenk 3893c609719bSwdenkSubmissions which do not conform to the standards may be returned 3894c609719bSwdenkwith a request to reformat the changes. 3895c609719bSwdenk 3896c609719bSwdenk 3897c609719bSwdenkSubmitting Patches: 3898c609719bSwdenk------------------- 3899c609719bSwdenk 3900c609719bSwdenkSince the number of patches for U-Boot is growing, we need to 3901c609719bSwdenkestablish some rules. Submissions which do not conform to these rules 3902c609719bSwdenkmay be rejected, even when they contain important and valuable stuff. 3903c609719bSwdenk 390490dc6704SwdenkPatches shall be sent to the u-boot-users mailing list. 3905c609719bSwdenk 39060d28f34bSMagnus LiljaPlease see http://www.denx.de/wiki/U-Boot/Patches for details. 3907218ca724SWolfgang Denk 3908c609719bSwdenkWhen you send a patch, please include the following information with 3909c609719bSwdenkit: 3910c609719bSwdenk 3911c609719bSwdenk* For bug fixes: a description of the bug and how your patch fixes 3912c609719bSwdenk this bug. Please try to include a way of demonstrating that the 3913c609719bSwdenk patch actually fixes something. 3914c609719bSwdenk 3915c609719bSwdenk* For new features: a description of the feature and your 3916c609719bSwdenk implementation. 3917c609719bSwdenk 3918c609719bSwdenk* A CHANGELOG entry as plaintext (separate from the patch) 3919c609719bSwdenk 3920c609719bSwdenk* For major contributions, your entry to the CREDITS file 3921c609719bSwdenk 3922c609719bSwdenk* When you add support for a new board, don't forget to add this 3923c609719bSwdenk board to the MAKEALL script, too. 3924c609719bSwdenk 3925c609719bSwdenk* If your patch adds new configuration options, don't forget to 3926c609719bSwdenk document these in the README file. 3927c609719bSwdenk 3928218ca724SWolfgang Denk* The patch itself. If you are using git (which is *strongly* 3929218ca724SWolfgang Denk recommended) you can easily generate the patch using the 3930218ca724SWolfgang Denk "git-format-patch". If you then use "git-send-email" to send it to 3931218ca724SWolfgang Denk the U-Boot mailing list, you will avoid most of the common problems 3932218ca724SWolfgang Denk with some other mail clients. 3933c609719bSwdenk 3934218ca724SWolfgang Denk If you cannot use git, use "diff -purN OLD NEW". If your version of 3935218ca724SWolfgang Denk diff does not support these options, then get the latest version of 3936218ca724SWolfgang Denk GNU diff. 39376dff5529Swdenk 3938218ca724SWolfgang Denk The current directory when running this command shall be the parent 3939218ca724SWolfgang Denk directory of the U-Boot source tree (i. e. please make sure that 3940218ca724SWolfgang Denk your patch includes sufficient directory information for the 3941218ca724SWolfgang Denk affected files). 3942218ca724SWolfgang Denk 3943218ca724SWolfgang Denk We prefer patches as plain text. MIME attachments are discouraged, 3944218ca724SWolfgang Denk and compressed attachments must not be used. 3945c609719bSwdenk 394652f52c14Swdenk* If one logical set of modifications affects or creates several 394752f52c14Swdenk files, all these changes shall be submitted in a SINGLE patch file. 394852f52c14Swdenk 394952f52c14Swdenk* Changesets that contain different, unrelated modifications shall be 395052f52c14Swdenk submitted as SEPARATE patches, one patch per changeset. 395152f52c14Swdenk 395252f52c14Swdenk 3953c609719bSwdenkNotes: 3954c609719bSwdenk 3955c609719bSwdenk* Before sending the patch, run the MAKEALL script on your patched 3956c609719bSwdenk source tree and make sure that no errors or warnings are reported 3957c609719bSwdenk for any of the boards. 3958c609719bSwdenk 3959c609719bSwdenk* Keep your modifications to the necessary minimum: A patch 3960c609719bSwdenk containing several unrelated changes or arbitrary reformats will be 3961c609719bSwdenk returned with a request to re-formatting / split it. 3962c609719bSwdenk 3963c609719bSwdenk* If you modify existing code, make sure that your new code does not 3964c609719bSwdenk add to the memory footprint of the code ;-) Small is beautiful! 3965c609719bSwdenk When adding new features, these should compile conditionally only 3966c609719bSwdenk (using #ifdef), and the resulting code with the new feature 3967c609719bSwdenk disabled must not need more memory than the old code without your 3968c609719bSwdenk modification. 396990dc6704Swdenk 397090dc6704Swdenk* Remember that there is a size limit of 40 kB per message on the 3971218ca724SWolfgang Denk u-boot-users mailing list. Bigger patches will be moderated. If 3972218ca724SWolfgang Denk they are reasonable and not bigger than 100 kB, they will be 3973218ca724SWolfgang Denk acknowledged. Even bigger patches should be avoided. 3974