1 /* 2 * ASPEED AST2400 SMC Controller (SPI Flash Only) 3 * 4 * Copyright (C) 2016 IBM Corp. 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include "qemu/osdep.h" 26 #include "hw/sysbus.h" 27 #include "migration/vmstate.h" 28 #include "qemu/log.h" 29 #include "qemu/module.h" 30 #include "qemu/error-report.h" 31 #include "qapi/error.h" 32 #include "qemu/units.h" 33 #include "trace.h" 34 35 #include "hw/irq.h" 36 #include "hw/qdev-properties.h" 37 #include "hw/ssi/aspeed_smc.h" 38 39 /* CE Type Setting Register */ 40 #define R_CONF (0x00 / 4) 41 #define CONF_LEGACY_DISABLE (1 << 31) 42 #define CONF_ENABLE_W4 20 43 #define CONF_ENABLE_W3 19 44 #define CONF_ENABLE_W2 18 45 #define CONF_ENABLE_W1 17 46 #define CONF_ENABLE_W0 16 47 #define CONF_FLASH_TYPE4 8 48 #define CONF_FLASH_TYPE3 6 49 #define CONF_FLASH_TYPE2 4 50 #define CONF_FLASH_TYPE1 2 51 #define CONF_FLASH_TYPE0 0 52 #define CONF_FLASH_TYPE_NOR 0x0 53 #define CONF_FLASH_TYPE_NAND 0x1 54 #define CONF_FLASH_TYPE_SPI 0x2 /* AST2600 is SPI only */ 55 56 /* CE Control Register */ 57 #define R_CE_CTRL (0x04 / 4) 58 #define CTRL_EXTENDED4 4 /* 32 bit addressing for SPI */ 59 #define CTRL_EXTENDED3 3 /* 32 bit addressing for SPI */ 60 #define CTRL_EXTENDED2 2 /* 32 bit addressing for SPI */ 61 #define CTRL_EXTENDED1 1 /* 32 bit addressing for SPI */ 62 #define CTRL_EXTENDED0 0 /* 32 bit addressing for SPI */ 63 64 /* Interrupt Control and Status Register */ 65 #define R_INTR_CTRL (0x08 / 4) 66 #define INTR_CTRL_DMA_STATUS (1 << 11) 67 #define INTR_CTRL_CMD_ABORT_STATUS (1 << 10) 68 #define INTR_CTRL_WRITE_PROTECT_STATUS (1 << 9) 69 #define INTR_CTRL_DMA_EN (1 << 3) 70 #define INTR_CTRL_CMD_ABORT_EN (1 << 2) 71 #define INTR_CTRL_WRITE_PROTECT_EN (1 << 1) 72 73 /* Command Control Register */ 74 #define R_CE_CMD_CTRL (0x0C / 4) 75 #define CTRL_ADDR_BYTE0_DISABLE_SHIFT 4 76 #define CTRL_DATA_BYTE0_DISABLE_SHIFT 0 77 78 #define aspeed_smc_addr_byte_enabled(s, i) \ 79 (!((s)->regs[R_CE_CMD_CTRL] & (1 << (CTRL_ADDR_BYTE0_DISABLE_SHIFT + (i))))) 80 #define aspeed_smc_data_byte_enabled(s, i) \ 81 (!((s)->regs[R_CE_CMD_CTRL] & (1 << (CTRL_DATA_BYTE0_DISABLE_SHIFT + (i))))) 82 83 /* CEx Control Register */ 84 #define R_CTRL0 (0x10 / 4) 85 #define CTRL_IO_QPI (1 << 31) 86 #define CTRL_IO_QUAD_DATA (1 << 30) 87 #define CTRL_IO_DUAL_DATA (1 << 29) 88 #define CTRL_IO_DUAL_ADDR_DATA (1 << 28) /* Includes dummies */ 89 #define CTRL_IO_QUAD_ADDR_DATA (1 << 28) /* Includes dummies */ 90 #define CTRL_CMD_SHIFT 16 91 #define CTRL_CMD_MASK 0xff 92 #define CTRL_DUMMY_HIGH_SHIFT 14 93 #define CTRL_AST2400_SPI_4BYTE (1 << 13) 94 #define CE_CTRL_CLOCK_FREQ_SHIFT 8 95 #define CE_CTRL_CLOCK_FREQ_MASK 0xf 96 #define CE_CTRL_CLOCK_FREQ(div) \ 97 (((div) & CE_CTRL_CLOCK_FREQ_MASK) << CE_CTRL_CLOCK_FREQ_SHIFT) 98 #define CTRL_DUMMY_LOW_SHIFT 6 /* 2 bits [7:6] */ 99 #define CTRL_CE_STOP_ACTIVE (1 << 2) 100 #define CTRL_CMD_MODE_MASK 0x3 101 #define CTRL_READMODE 0x0 102 #define CTRL_FREADMODE 0x1 103 #define CTRL_WRITEMODE 0x2 104 #define CTRL_USERMODE 0x3 105 #define R_CTRL1 (0x14 / 4) 106 #define R_CTRL2 (0x18 / 4) 107 #define R_CTRL3 (0x1C / 4) 108 #define R_CTRL4 (0x20 / 4) 109 110 /* CEx Segment Address Register */ 111 #define R_SEG_ADDR0 (0x30 / 4) 112 #define SEG_END_SHIFT 24 /* 8MB units */ 113 #define SEG_END_MASK 0xff 114 #define SEG_START_SHIFT 16 /* address bit [A29-A23] */ 115 #define SEG_START_MASK 0xff 116 #define R_SEG_ADDR1 (0x34 / 4) 117 #define R_SEG_ADDR2 (0x38 / 4) 118 #define R_SEG_ADDR3 (0x3C / 4) 119 #define R_SEG_ADDR4 (0x40 / 4) 120 121 /* Misc Control Register #1 */ 122 #define R_MISC_CTRL1 (0x50 / 4) 123 124 /* SPI dummy cycle data */ 125 #define R_DUMMY_DATA (0x54 / 4) 126 127 /* FMC_WDT2 Control/Status Register for Alternate Boot (AST2600) */ 128 #define R_FMC_WDT2_CTRL (0x64 / 4) 129 #define FMC_WDT2_CTRL_ALT_BOOT_MODE BIT(6) /* O: 2 chips 1: 1 chip */ 130 #define FMC_WDT2_CTRL_SINGLE_BOOT_MODE BIT(5) 131 #define FMC_WDT2_CTRL_BOOT_SOURCE BIT(4) /* O: primary 1: alternate */ 132 #define FMC_WDT2_CTRL_EN BIT(0) 133 134 /* DMA Control/Status Register */ 135 #define R_DMA_CTRL (0x80 / 4) 136 #define DMA_CTRL_REQUEST (1 << 31) 137 #define DMA_CTRL_GRANT (1 << 30) 138 #define DMA_CTRL_DELAY_MASK 0xf 139 #define DMA_CTRL_DELAY_SHIFT 8 140 #define DMA_CTRL_FREQ_MASK 0xf 141 #define DMA_CTRL_FREQ_SHIFT 4 142 #define DMA_CTRL_CALIB (1 << 3) 143 #define DMA_CTRL_CKSUM (1 << 2) 144 #define DMA_CTRL_WRITE (1 << 1) 145 #define DMA_CTRL_ENABLE (1 << 0) 146 147 /* DMA Flash Side Address */ 148 #define R_DMA_FLASH_ADDR (0x84 / 4) 149 150 /* DMA DRAM Side Address */ 151 #define R_DMA_DRAM_ADDR (0x88 / 4) 152 153 /* DMA Length Register */ 154 #define R_DMA_LEN (0x8C / 4) 155 156 /* Checksum Calculation Result */ 157 #define R_DMA_CHECKSUM (0x90 / 4) 158 159 /* Read Timing Compensation Register */ 160 #define R_TIMINGS (0x94 / 4) 161 162 /* SPI controller registers and bits (AST2400) */ 163 #define R_SPI_CONF (0x00 / 4) 164 #define SPI_CONF_ENABLE_W0 0 165 #define R_SPI_CTRL0 (0x4 / 4) 166 #define R_SPI_MISC_CTRL (0x10 / 4) 167 #define R_SPI_TIMINGS (0x14 / 4) 168 169 #define ASPEED_SMC_R_SPI_MAX (0x20 / 4) 170 #define ASPEED_SMC_R_SMC_MAX (0x20 / 4) 171 172 /* 173 * DMA DRAM addresses should be 4 bytes aligned and the valid address 174 * range is 0x40000000 - 0x5FFFFFFF (AST2400) 175 * 0x80000000 - 0xBFFFFFFF (AST2500) 176 * 177 * DMA flash addresses should be 4 bytes aligned and the valid address 178 * range is 0x20000000 - 0x2FFFFFFF. 179 * 180 * DMA length is from 4 bytes to 32MB 181 * 0: 4 bytes 182 * 0x7FFFFF: 32M bytes 183 */ 184 #define DMA_DRAM_ADDR(asc, val) ((val) & (asc)->dma_dram_mask) 185 #define DMA_FLASH_ADDR(asc, val) ((val) & (asc)->dma_flash_mask) 186 #define DMA_LENGTH(val) ((val) & 0x01FFFFFC) 187 188 /* Flash opcodes. */ 189 #define SPI_OP_READ 0x03 /* Read data bytes (low frequency) */ 190 191 #define SNOOP_OFF 0xFF 192 #define SNOOP_START 0x0 193 194 /* 195 * Default segments mapping addresses and size for each peripheral per 196 * controller. These can be changed when board is initialized with the 197 * Segment Address Registers. 198 */ 199 static const AspeedSegments aspeed_2500_spi1_segments[]; 200 static const AspeedSegments aspeed_2500_spi2_segments[]; 201 202 #define ASPEED_SMC_FEATURE_DMA 0x1 203 #define ASPEED_SMC_FEATURE_DMA_GRANT 0x2 204 #define ASPEED_SMC_FEATURE_WDT_CONTROL 0x4 205 206 static inline bool aspeed_smc_has_dma(const AspeedSMCClass *asc) 207 { 208 return !!(asc->features & ASPEED_SMC_FEATURE_DMA); 209 } 210 211 static inline bool aspeed_smc_has_wdt_control(const AspeedSMCClass *asc) 212 { 213 return !!(asc->features & ASPEED_SMC_FEATURE_WDT_CONTROL); 214 } 215 216 #define aspeed_smc_error(fmt, ...) \ 217 qemu_log_mask(LOG_GUEST_ERROR, "%s: " fmt "\n", __func__, ## __VA_ARGS__) 218 219 static bool aspeed_smc_flash_overlap(const AspeedSMCState *s, 220 const AspeedSegments *new, 221 int cs) 222 { 223 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 224 AspeedSegments seg; 225 int i; 226 227 for (i = 0; i < asc->cs_num_max; i++) { 228 if (i == cs) { 229 continue; 230 } 231 232 asc->reg_to_segment(s, s->regs[R_SEG_ADDR0 + i], &seg); 233 234 if (new->addr + new->size > seg.addr && 235 new->addr < seg.addr + seg.size) { 236 aspeed_smc_error("new segment CS%d [ 0x%" 237 HWADDR_PRIx" - 0x%"HWADDR_PRIx" ] overlaps with " 238 "CS%d [ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]", 239 cs, new->addr, new->addr + new->size, 240 i, seg.addr, seg.addr + seg.size); 241 return true; 242 } 243 } 244 return false; 245 } 246 247 static void aspeed_smc_flash_set_segment_region(AspeedSMCState *s, int cs, 248 uint64_t regval) 249 { 250 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 251 AspeedSMCFlash *fl = &s->flashes[cs]; 252 AspeedSegments seg; 253 254 asc->reg_to_segment(s, regval, &seg); 255 256 memory_region_transaction_begin(); 257 memory_region_set_size(&fl->mmio, seg.size); 258 memory_region_set_address(&fl->mmio, seg.addr - asc->flash_window_base); 259 memory_region_set_enabled(&fl->mmio, !!seg.size); 260 memory_region_transaction_commit(); 261 262 if (asc->segment_addr_mask) { 263 regval &= asc->segment_addr_mask; 264 } 265 266 s->regs[R_SEG_ADDR0 + cs] = regval; 267 } 268 269 static void aspeed_smc_flash_set_segment(AspeedSMCState *s, int cs, 270 uint64_t new) 271 { 272 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 273 AspeedSegments seg; 274 275 asc->reg_to_segment(s, new, &seg); 276 277 trace_aspeed_smc_flash_set_segment(cs, new, seg.addr, seg.addr + seg.size); 278 279 /* The start address of CS0 is read-only */ 280 if (cs == 0 && seg.addr != asc->flash_window_base) { 281 aspeed_smc_error("Tried to change CS0 start address to 0x%" 282 HWADDR_PRIx, seg.addr); 283 seg.addr = asc->flash_window_base; 284 new = asc->segment_to_reg(s, &seg); 285 } 286 287 /* 288 * The end address of the AST2500 spi controllers is also 289 * read-only. 290 */ 291 if ((asc->segments == aspeed_2500_spi1_segments || 292 asc->segments == aspeed_2500_spi2_segments) && 293 cs == asc->cs_num_max && 294 seg.addr + seg.size != asc->segments[cs].addr + 295 asc->segments[cs].size) { 296 aspeed_smc_error("Tried to change CS%d end address to 0x%" 297 HWADDR_PRIx, cs, seg.addr + seg.size); 298 seg.size = asc->segments[cs].addr + asc->segments[cs].size - 299 seg.addr; 300 new = asc->segment_to_reg(s, &seg); 301 } 302 303 /* Keep the segment in the overall flash window */ 304 if (seg.size && 305 (seg.addr + seg.size <= asc->flash_window_base || 306 seg.addr > asc->flash_window_base + asc->flash_window_size)) { 307 aspeed_smc_error("new segment for CS%d is invalid : " 308 "[ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]", 309 cs, seg.addr, seg.addr + seg.size); 310 return; 311 } 312 313 /* Check start address vs. alignment */ 314 if (seg.size && !QEMU_IS_ALIGNED(seg.addr, seg.size)) { 315 aspeed_smc_error("new segment for CS%d is not " 316 "aligned : [ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]", 317 cs, seg.addr, seg.addr + seg.size); 318 } 319 320 /* And segments should not overlap (in the specs) */ 321 aspeed_smc_flash_overlap(s, &seg, cs); 322 323 /* All should be fine now to move the region */ 324 aspeed_smc_flash_set_segment_region(s, cs, new); 325 } 326 327 static uint64_t aspeed_smc_flash_default_read(void *opaque, hwaddr addr, 328 unsigned size) 329 { 330 aspeed_smc_error("To 0x%" HWADDR_PRIx " of size %u", addr, size); 331 return 0; 332 } 333 334 static void aspeed_smc_flash_default_write(void *opaque, hwaddr addr, 335 uint64_t data, unsigned size) 336 { 337 aspeed_smc_error("To 0x%" HWADDR_PRIx " of size %u: 0x%" PRIx64, 338 addr, size, data); 339 } 340 341 static const MemoryRegionOps aspeed_smc_flash_default_ops = { 342 .read = aspeed_smc_flash_default_read, 343 .write = aspeed_smc_flash_default_write, 344 .endianness = DEVICE_LITTLE_ENDIAN, 345 .valid = { 346 .min_access_size = 1, 347 .max_access_size = 4, 348 }, 349 }; 350 351 static inline int aspeed_smc_flash_mode(const AspeedSMCFlash *fl) 352 { 353 const AspeedSMCState *s = fl->controller; 354 355 return s->regs[s->r_ctrl0 + fl->cs] & CTRL_CMD_MODE_MASK; 356 } 357 358 static inline bool aspeed_smc_is_writable(const AspeedSMCFlash *fl) 359 { 360 const AspeedSMCState *s = fl->controller; 361 362 return s->regs[s->r_conf] & (1 << (s->conf_enable_w0 + fl->cs)); 363 } 364 365 static inline int aspeed_smc_flash_cmd(const AspeedSMCFlash *fl) 366 { 367 const AspeedSMCState *s = fl->controller; 368 int cmd = (s->regs[s->r_ctrl0 + fl->cs] >> CTRL_CMD_SHIFT) & CTRL_CMD_MASK; 369 370 /* 371 * In read mode, the default SPI command is READ (0x3). In other 372 * modes, the command should necessarily be defined 373 * 374 * TODO: add support for READ4 (0x13) on AST2600 375 */ 376 if (aspeed_smc_flash_mode(fl) == CTRL_READMODE) { 377 cmd = SPI_OP_READ; 378 } 379 380 if (!cmd) { 381 aspeed_smc_error("no command defined for mode %d", 382 aspeed_smc_flash_mode(fl)); 383 } 384 385 return cmd; 386 } 387 388 static inline int aspeed_smc_flash_addr_width(const AspeedSMCFlash *fl) 389 { 390 const AspeedSMCState *s = fl->controller; 391 AspeedSMCClass *asc = fl->asc; 392 393 if (asc->addr_width) { 394 return asc->addr_width(s); 395 } else { 396 return s->regs[s->r_ce_ctrl] & (1 << (CTRL_EXTENDED0 + fl->cs)) ? 4 : 3; 397 } 398 } 399 400 static void aspeed_smc_flash_do_select(AspeedSMCFlash *fl, bool unselect) 401 { 402 AspeedSMCState *s = fl->controller; 403 404 trace_aspeed_smc_flash_select(fl->cs, unselect ? "un" : ""); 405 406 qemu_set_irq(s->cs_lines[fl->cs], unselect); 407 } 408 409 static void aspeed_smc_flash_select(AspeedSMCFlash *fl) 410 { 411 aspeed_smc_flash_do_select(fl, false); 412 } 413 414 static void aspeed_smc_flash_unselect(AspeedSMCFlash *fl) 415 { 416 aspeed_smc_flash_do_select(fl, true); 417 } 418 419 static uint32_t aspeed_smc_check_segment_addr(const AspeedSMCFlash *fl, 420 uint32_t addr) 421 { 422 const AspeedSMCState *s = fl->controller; 423 AspeedSMCClass *asc = fl->asc; 424 AspeedSegments seg; 425 426 asc->reg_to_segment(s, s->regs[R_SEG_ADDR0 + fl->cs], &seg); 427 if ((addr % seg.size) != addr) { 428 aspeed_smc_error("invalid address 0x%08x for CS%d segment : " 429 "[ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]", 430 addr, fl->cs, seg.addr, seg.addr + seg.size); 431 addr %= seg.size; 432 } 433 434 return addr; 435 } 436 437 static int aspeed_smc_flash_dummies(const AspeedSMCFlash *fl) 438 { 439 const AspeedSMCState *s = fl->controller; 440 uint32_t r_ctrl0 = s->regs[s->r_ctrl0 + fl->cs]; 441 uint32_t dummy_high = (r_ctrl0 >> CTRL_DUMMY_HIGH_SHIFT) & 0x1; 442 uint32_t dummy_low = (r_ctrl0 >> CTRL_DUMMY_LOW_SHIFT) & 0x3; 443 uint32_t dummies = ((dummy_high << 2) | dummy_low) * 8; 444 445 if (r_ctrl0 & CTRL_IO_DUAL_ADDR_DATA) { 446 dummies /= 2; 447 } 448 449 return dummies; 450 } 451 452 static void aspeed_smc_flash_setup(AspeedSMCFlash *fl, uint32_t addr) 453 { 454 const AspeedSMCState *s = fl->controller; 455 uint8_t cmd = aspeed_smc_flash_cmd(fl); 456 int i = aspeed_smc_flash_addr_width(fl); 457 458 /* Flash access can not exceed CS segment */ 459 addr = aspeed_smc_check_segment_addr(fl, addr); 460 461 ssi_transfer(s->spi, cmd); 462 while (i--) { 463 if (aspeed_smc_addr_byte_enabled(s, i)) { 464 ssi_transfer(s->spi, (addr >> (i * 8)) & 0xff); 465 } 466 } 467 468 /* 469 * Use fake transfers to model dummy bytes. The value should 470 * be configured to some non-zero value in fast read mode and 471 * zero in read mode. But, as the HW allows inconsistent 472 * settings, let's check for fast read mode. 473 */ 474 if (aspeed_smc_flash_mode(fl) == CTRL_FREADMODE) { 475 for (i = 0; i < aspeed_smc_flash_dummies(fl); i++) { 476 ssi_transfer(fl->controller->spi, s->regs[R_DUMMY_DATA] & 0xff); 477 } 478 } 479 } 480 481 static uint64_t aspeed_smc_flash_read(void *opaque, hwaddr addr, unsigned size) 482 { 483 AspeedSMCFlash *fl = opaque; 484 AspeedSMCState *s = fl->controller; 485 uint64_t ret = 0; 486 int i; 487 488 switch (aspeed_smc_flash_mode(fl)) { 489 case CTRL_USERMODE: 490 for (i = 0; i < size; i++) { 491 ret |= (uint64_t) ssi_transfer(s->spi, 0x0) << (8 * i); 492 } 493 break; 494 case CTRL_READMODE: 495 case CTRL_FREADMODE: 496 aspeed_smc_flash_select(fl); 497 aspeed_smc_flash_setup(fl, addr); 498 499 for (i = 0; i < size; i++) { 500 ret |= (uint64_t) ssi_transfer(s->spi, 0x0) << (8 * i); 501 } 502 503 aspeed_smc_flash_unselect(fl); 504 break; 505 default: 506 aspeed_smc_error("invalid flash mode %d", aspeed_smc_flash_mode(fl)); 507 } 508 509 trace_aspeed_smc_flash_read(fl->cs, addr, size, ret, 510 aspeed_smc_flash_mode(fl)); 511 return ret; 512 } 513 514 /* 515 * TODO (clg@kaod.org): stolen from xilinx_spips.c. Should move to a 516 * common include header. 517 */ 518 typedef enum { 519 READ = 0x3, READ_4 = 0x13, 520 FAST_READ = 0xb, FAST_READ_4 = 0x0c, 521 DOR = 0x3b, DOR_4 = 0x3c, 522 QOR = 0x6b, QOR_4 = 0x6c, 523 DIOR = 0xbb, DIOR_4 = 0xbc, 524 QIOR = 0xeb, QIOR_4 = 0xec, 525 526 PP = 0x2, PP_4 = 0x12, 527 DPP = 0xa2, 528 QPP = 0x32, QPP_4 = 0x34, 529 } FlashCMD; 530 531 static int aspeed_smc_num_dummies(uint8_t command) 532 { 533 switch (command) { /* check for dummies */ 534 case READ: /* no dummy bytes/cycles */ 535 case PP: 536 case DPP: 537 case QPP: 538 case READ_4: 539 case PP_4: 540 case QPP_4: 541 return 0; 542 case FAST_READ: 543 case DOR: 544 case QOR: 545 case FAST_READ_4: 546 case DOR_4: 547 case QOR_4: 548 return 1; 549 case DIOR: 550 case DIOR_4: 551 return 2; 552 case QIOR: 553 case QIOR_4: 554 return 4; 555 default: 556 return -1; 557 } 558 } 559 560 static bool aspeed_smc_do_snoop(AspeedSMCFlash *fl, uint64_t data, 561 unsigned size) 562 { 563 AspeedSMCState *s = fl->controller; 564 uint8_t addr_width = aspeed_smc_flash_addr_width(fl); 565 566 trace_aspeed_smc_do_snoop(fl->cs, s->snoop_index, s->snoop_dummies, 567 (uint8_t) data & 0xff); 568 569 if (s->snoop_index == SNOOP_OFF) { 570 return false; /* Do nothing */ 571 572 } else if (s->snoop_index == SNOOP_START) { 573 uint8_t cmd = data & 0xff; 574 int ndummies = aspeed_smc_num_dummies(cmd); 575 576 /* 577 * No dummy cycles are expected with the current command. Turn 578 * off snooping and let the transfer proceed normally. 579 */ 580 if (ndummies <= 0) { 581 s->snoop_index = SNOOP_OFF; 582 return false; 583 } 584 585 s->snoop_dummies = ndummies * 8; 586 587 } else if (s->snoop_index >= addr_width + 1) { 588 589 /* The SPI transfer has reached the dummy cycles sequence */ 590 for (; s->snoop_dummies; s->snoop_dummies--) { 591 ssi_transfer(s->spi, s->regs[R_DUMMY_DATA] & 0xff); 592 } 593 594 /* If no more dummy cycles are expected, turn off snooping */ 595 if (!s->snoop_dummies) { 596 s->snoop_index = SNOOP_OFF; 597 } else { 598 s->snoop_index += size; 599 } 600 601 /* 602 * Dummy cycles have been faked already. Ignore the current 603 * SPI transfer 604 */ 605 return true; 606 } 607 608 s->snoop_index += size; 609 return false; 610 } 611 612 static void aspeed_smc_flash_write(void *opaque, hwaddr addr, uint64_t data, 613 unsigned size) 614 { 615 AspeedSMCFlash *fl = opaque; 616 AspeedSMCState *s = fl->controller; 617 int i; 618 619 trace_aspeed_smc_flash_write(fl->cs, addr, size, data, 620 aspeed_smc_flash_mode(fl)); 621 622 if (!aspeed_smc_is_writable(fl)) { 623 aspeed_smc_error("flash is not writable at 0x%" HWADDR_PRIx, addr); 624 return; 625 } 626 627 switch (aspeed_smc_flash_mode(fl)) { 628 case CTRL_USERMODE: 629 if (aspeed_smc_do_snoop(fl, data, size)) { 630 break; 631 } 632 633 for (i = 0; i < size; i++) { 634 ssi_transfer(s->spi, (data >> (8 * i)) & 0xff); 635 } 636 break; 637 case CTRL_WRITEMODE: 638 aspeed_smc_flash_select(fl); 639 aspeed_smc_flash_setup(fl, addr); 640 641 for (i = 0; i < size; i++) { 642 ssi_transfer(s->spi, (data >> (8 * i)) & 0xff); 643 } 644 645 aspeed_smc_flash_unselect(fl); 646 break; 647 default: 648 aspeed_smc_error("invalid flash mode %d", aspeed_smc_flash_mode(fl)); 649 } 650 } 651 652 static const MemoryRegionOps aspeed_smc_flash_ops = { 653 .read = aspeed_smc_flash_read, 654 .write = aspeed_smc_flash_write, 655 .endianness = DEVICE_LITTLE_ENDIAN, 656 .valid = { 657 .min_access_size = 1, 658 .max_access_size = 4, 659 }, 660 }; 661 662 static void aspeed_smc_flash_update_ctrl(AspeedSMCFlash *fl, uint32_t value) 663 { 664 AspeedSMCState *s = fl->controller; 665 bool unselect; 666 667 /* User mode selects the CS, other modes unselect */ 668 unselect = (value & CTRL_CMD_MODE_MASK) != CTRL_USERMODE; 669 670 /* A change of CTRL_CE_STOP_ACTIVE from 0 to 1, unselects the CS */ 671 if (!(s->regs[s->r_ctrl0 + fl->cs] & CTRL_CE_STOP_ACTIVE) && 672 value & CTRL_CE_STOP_ACTIVE) { 673 unselect = true; 674 } 675 676 s->regs[s->r_ctrl0 + fl->cs] = value; 677 678 s->snoop_index = unselect ? SNOOP_OFF : SNOOP_START; 679 680 aspeed_smc_flash_do_select(fl, unselect); 681 } 682 683 static void aspeed_smc_reset(DeviceState *d) 684 { 685 AspeedSMCState *s = ASPEED_SMC(d); 686 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 687 int i; 688 689 if (asc->resets) { 690 memcpy(s->regs, asc->resets, sizeof s->regs); 691 } else { 692 memset(s->regs, 0, sizeof s->regs); 693 } 694 695 for (i = 0; i < asc->cs_num_max; i++) { 696 DeviceState *dev = ssi_get_cs(s->spi, i); 697 if (dev) { 698 qemu_irq cs_line = qdev_get_gpio_in_named(dev, SSI_GPIO_CS, 0); 699 qdev_connect_gpio_out_named(DEVICE(s), "cs", i, cs_line); 700 } 701 } 702 703 /* Unselect all peripherals */ 704 for (i = 0; i < asc->cs_num_max; ++i) { 705 s->regs[s->r_ctrl0 + i] |= CTRL_CE_STOP_ACTIVE; 706 qemu_set_irq(s->cs_lines[i], true); 707 } 708 709 /* setup the default segment register values and regions for all */ 710 for (i = 0; i < asc->cs_num_max; ++i) { 711 aspeed_smc_flash_set_segment_region(s, i, 712 asc->segment_to_reg(s, &asc->segments[i])); 713 } 714 715 s->snoop_index = SNOOP_OFF; 716 s->snoop_dummies = 0; 717 } 718 719 static uint64_t aspeed_smc_read(void *opaque, hwaddr addr, unsigned int size) 720 { 721 AspeedSMCState *s = ASPEED_SMC(opaque); 722 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(opaque); 723 724 addr >>= 2; 725 726 if (addr == s->r_conf || 727 (addr >= s->r_timings && 728 addr < s->r_timings + asc->nregs_timings) || 729 addr == s->r_ce_ctrl || 730 addr == R_CE_CMD_CTRL || 731 addr == R_INTR_CTRL || 732 addr == R_DUMMY_DATA || 733 (aspeed_smc_has_wdt_control(asc) && addr == R_FMC_WDT2_CTRL) || 734 (aspeed_smc_has_dma(asc) && addr == R_DMA_CTRL) || 735 (aspeed_smc_has_dma(asc) && addr == R_DMA_FLASH_ADDR) || 736 (aspeed_smc_has_dma(asc) && addr == R_DMA_DRAM_ADDR) || 737 (aspeed_smc_has_dma(asc) && addr == R_DMA_LEN) || 738 (aspeed_smc_has_dma(asc) && addr == R_DMA_CHECKSUM) || 739 (addr >= R_SEG_ADDR0 && 740 addr < R_SEG_ADDR0 + asc->cs_num_max) || 741 (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + asc->cs_num_max)) { 742 743 trace_aspeed_smc_read(addr << 2, size, s->regs[addr]); 744 745 return s->regs[addr]; 746 } else { 747 qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n", 748 __func__, addr); 749 return -1; 750 } 751 } 752 753 static uint8_t aspeed_smc_hclk_divisor(uint8_t hclk_mask) 754 { 755 /* HCLK/1 .. HCLK/16 */ 756 const uint8_t hclk_divisors[] = { 757 15, 7, 14, 6, 13, 5, 12, 4, 11, 3, 10, 2, 9, 1, 8, 0 758 }; 759 int i; 760 761 for (i = 0; i < ARRAY_SIZE(hclk_divisors); i++) { 762 if (hclk_mask == hclk_divisors[i]) { 763 return i + 1; 764 } 765 } 766 767 aspeed_smc_error("invalid HCLK mask %x", hclk_mask); 768 return 0; 769 } 770 771 /* 772 * When doing calibration, the SPI clock rate in the CE0 Control 773 * Register and the read delay cycles in the Read Timing Compensation 774 * Register are set using bit[11:4] of the DMA Control Register. 775 */ 776 static void aspeed_smc_dma_calibration(AspeedSMCState *s) 777 { 778 uint8_t delay = 779 (s->regs[R_DMA_CTRL] >> DMA_CTRL_DELAY_SHIFT) & DMA_CTRL_DELAY_MASK; 780 uint8_t hclk_mask = 781 (s->regs[R_DMA_CTRL] >> DMA_CTRL_FREQ_SHIFT) & DMA_CTRL_FREQ_MASK; 782 uint8_t hclk_div = aspeed_smc_hclk_divisor(hclk_mask); 783 uint32_t hclk_shift = (hclk_div - 1) << 2; 784 uint8_t cs; 785 786 /* 787 * The Read Timing Compensation Register values apply to all CS on 788 * the SPI bus and only HCLK/1 - HCLK/5 can have tunable delays 789 */ 790 if (hclk_div && hclk_div < 6) { 791 s->regs[s->r_timings] &= ~(0xf << hclk_shift); 792 s->regs[s->r_timings] |= delay << hclk_shift; 793 } 794 795 /* 796 * TODO: compute the CS from the DMA address and the segment 797 * registers. This is not really a problem for now because the 798 * Timing Register values apply to all CS and software uses CS0 to 799 * do calibration. 800 */ 801 cs = 0; 802 s->regs[s->r_ctrl0 + cs] &= 803 ~(CE_CTRL_CLOCK_FREQ_MASK << CE_CTRL_CLOCK_FREQ_SHIFT); 804 s->regs[s->r_ctrl0 + cs] |= CE_CTRL_CLOCK_FREQ(hclk_div); 805 } 806 807 /* 808 * Emulate read errors in the DMA Checksum Register for high 809 * frequencies and optimistic settings of the Read Timing Compensation 810 * Register. This will help in tuning the SPI timing calibration 811 * algorithm. 812 */ 813 static bool aspeed_smc_inject_read_failure(AspeedSMCState *s) 814 { 815 uint8_t delay = 816 (s->regs[R_DMA_CTRL] >> DMA_CTRL_DELAY_SHIFT) & DMA_CTRL_DELAY_MASK; 817 uint8_t hclk_mask = 818 (s->regs[R_DMA_CTRL] >> DMA_CTRL_FREQ_SHIFT) & DMA_CTRL_FREQ_MASK; 819 820 /* 821 * Typical values of a palmetto-bmc machine. 822 */ 823 switch (aspeed_smc_hclk_divisor(hclk_mask)) { 824 case 4 ... 16: 825 return false; 826 case 3: /* at least one HCLK cycle delay */ 827 return (delay & 0x7) < 1; 828 case 2: /* at least two HCLK cycle delay */ 829 return (delay & 0x7) < 2; 830 case 1: /* (> 100MHz) is above the max freq of the controller */ 831 return true; 832 default: 833 g_assert_not_reached(); 834 } 835 } 836 837 /* 838 * Accumulate the result of the reads to provide a checksum that will 839 * be used to validate the read timing settings. 840 */ 841 static void aspeed_smc_dma_checksum(AspeedSMCState *s) 842 { 843 MemTxResult result; 844 uint32_t data; 845 846 if (s->regs[R_DMA_CTRL] & DMA_CTRL_WRITE) { 847 aspeed_smc_error("invalid direction for DMA checksum"); 848 return; 849 } 850 851 if (s->regs[R_DMA_CTRL] & DMA_CTRL_CALIB) { 852 aspeed_smc_dma_calibration(s); 853 } 854 855 while (s->regs[R_DMA_LEN]) { 856 data = address_space_ldl_le(&s->flash_as, s->regs[R_DMA_FLASH_ADDR], 857 MEMTXATTRS_UNSPECIFIED, &result); 858 if (result != MEMTX_OK) { 859 aspeed_smc_error("Flash read failed @%08x", 860 s->regs[R_DMA_FLASH_ADDR]); 861 return; 862 } 863 trace_aspeed_smc_dma_checksum(s->regs[R_DMA_FLASH_ADDR], data); 864 865 /* 866 * When the DMA is on-going, the DMA registers are updated 867 * with the current working addresses and length. 868 */ 869 s->regs[R_DMA_CHECKSUM] += data; 870 s->regs[R_DMA_FLASH_ADDR] += 4; 871 s->regs[R_DMA_LEN] -= 4; 872 } 873 874 if (s->inject_failure && aspeed_smc_inject_read_failure(s)) { 875 s->regs[R_DMA_CHECKSUM] = 0xbadc0de; 876 } 877 878 } 879 880 static void aspeed_smc_dma_rw(AspeedSMCState *s) 881 { 882 MemTxResult result; 883 uint32_t data; 884 885 trace_aspeed_smc_dma_rw(s->regs[R_DMA_CTRL] & DMA_CTRL_WRITE ? 886 "write" : "read", 887 s->regs[R_DMA_FLASH_ADDR], 888 s->regs[R_DMA_DRAM_ADDR], 889 s->regs[R_DMA_LEN]); 890 while (s->regs[R_DMA_LEN]) { 891 if (s->regs[R_DMA_CTRL] & DMA_CTRL_WRITE) { 892 data = address_space_ldl_le(&s->dram_as, s->regs[R_DMA_DRAM_ADDR], 893 MEMTXATTRS_UNSPECIFIED, &result); 894 if (result != MEMTX_OK) { 895 aspeed_smc_error("DRAM read failed @%08x", 896 s->regs[R_DMA_DRAM_ADDR]); 897 return; 898 } 899 900 address_space_stl_le(&s->flash_as, s->regs[R_DMA_FLASH_ADDR], 901 data, MEMTXATTRS_UNSPECIFIED, &result); 902 if (result != MEMTX_OK) { 903 aspeed_smc_error("Flash write failed @%08x", 904 s->regs[R_DMA_FLASH_ADDR]); 905 return; 906 } 907 } else { 908 data = address_space_ldl_le(&s->flash_as, s->regs[R_DMA_FLASH_ADDR], 909 MEMTXATTRS_UNSPECIFIED, &result); 910 if (result != MEMTX_OK) { 911 aspeed_smc_error("Flash read failed @%08x", 912 s->regs[R_DMA_FLASH_ADDR]); 913 return; 914 } 915 916 address_space_stl_le(&s->dram_as, s->regs[R_DMA_DRAM_ADDR], 917 data, MEMTXATTRS_UNSPECIFIED, &result); 918 if (result != MEMTX_OK) { 919 aspeed_smc_error("DRAM write failed @%08x", 920 s->regs[R_DMA_DRAM_ADDR]); 921 return; 922 } 923 } 924 925 /* 926 * When the DMA is on-going, the DMA registers are updated 927 * with the current working addresses and length. 928 */ 929 s->regs[R_DMA_FLASH_ADDR] += 4; 930 s->regs[R_DMA_DRAM_ADDR] += 4; 931 s->regs[R_DMA_LEN] -= 4; 932 s->regs[R_DMA_CHECKSUM] += data; 933 } 934 } 935 936 static void aspeed_smc_dma_stop(AspeedSMCState *s) 937 { 938 /* 939 * When the DMA is disabled, INTR_CTRL_DMA_STATUS=0 means the 940 * engine is idle 941 */ 942 s->regs[R_INTR_CTRL] &= ~INTR_CTRL_DMA_STATUS; 943 s->regs[R_DMA_CHECKSUM] = 0; 944 945 /* 946 * Lower the DMA irq in any case. The IRQ control register could 947 * have been cleared before disabling the DMA. 948 */ 949 qemu_irq_lower(s->irq); 950 } 951 952 /* 953 * When INTR_CTRL_DMA_STATUS=1, the DMA has completed and a new DMA 954 * can start even if the result of the previous was not collected. 955 */ 956 static bool aspeed_smc_dma_in_progress(AspeedSMCState *s) 957 { 958 return s->regs[R_DMA_CTRL] & DMA_CTRL_ENABLE && 959 !(s->regs[R_INTR_CTRL] & INTR_CTRL_DMA_STATUS); 960 } 961 962 static void aspeed_smc_dma_done(AspeedSMCState *s) 963 { 964 s->regs[R_INTR_CTRL] |= INTR_CTRL_DMA_STATUS; 965 if (s->regs[R_INTR_CTRL] & INTR_CTRL_DMA_EN) { 966 qemu_irq_raise(s->irq); 967 } 968 } 969 970 static void aspeed_smc_dma_ctrl(AspeedSMCState *s, uint32_t dma_ctrl) 971 { 972 if (!(dma_ctrl & DMA_CTRL_ENABLE)) { 973 s->regs[R_DMA_CTRL] = dma_ctrl; 974 975 aspeed_smc_dma_stop(s); 976 return; 977 } 978 979 if (aspeed_smc_dma_in_progress(s)) { 980 aspeed_smc_error("DMA in progress !"); 981 return; 982 } 983 984 s->regs[R_DMA_CTRL] = dma_ctrl; 985 986 if (s->regs[R_DMA_CTRL] & DMA_CTRL_CKSUM) { 987 aspeed_smc_dma_checksum(s); 988 } else { 989 aspeed_smc_dma_rw(s); 990 } 991 992 aspeed_smc_dma_done(s); 993 } 994 995 static inline bool aspeed_smc_dma_granted(AspeedSMCState *s) 996 { 997 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 998 999 if (!(asc->features & ASPEED_SMC_FEATURE_DMA_GRANT)) { 1000 return true; 1001 } 1002 1003 if (!(s->regs[R_DMA_CTRL] & DMA_CTRL_GRANT)) { 1004 aspeed_smc_error("DMA not granted"); 1005 return false; 1006 } 1007 1008 return true; 1009 } 1010 1011 static void aspeed_2600_smc_dma_ctrl(AspeedSMCState *s, uint32_t dma_ctrl) 1012 { 1013 /* Preserve DMA bits */ 1014 dma_ctrl |= s->regs[R_DMA_CTRL] & (DMA_CTRL_REQUEST | DMA_CTRL_GRANT); 1015 1016 if (dma_ctrl == 0xAEED0000) { 1017 /* automatically grant request */ 1018 s->regs[R_DMA_CTRL] |= (DMA_CTRL_REQUEST | DMA_CTRL_GRANT); 1019 return; 1020 } 1021 1022 /* clear request */ 1023 if (dma_ctrl == 0xDEEA0000) { 1024 s->regs[R_DMA_CTRL] &= ~(DMA_CTRL_REQUEST | DMA_CTRL_GRANT); 1025 return; 1026 } 1027 1028 if (!aspeed_smc_dma_granted(s)) { 1029 aspeed_smc_error("DMA not granted"); 1030 return; 1031 } 1032 1033 aspeed_smc_dma_ctrl(s, dma_ctrl); 1034 s->regs[R_DMA_CTRL] &= ~(DMA_CTRL_REQUEST | DMA_CTRL_GRANT); 1035 } 1036 1037 static void aspeed_smc_write(void *opaque, hwaddr addr, uint64_t data, 1038 unsigned int size) 1039 { 1040 AspeedSMCState *s = ASPEED_SMC(opaque); 1041 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 1042 uint32_t value = data; 1043 1044 trace_aspeed_smc_write(addr, size, data); 1045 1046 addr >>= 2; 1047 1048 if (addr == s->r_conf || 1049 (addr >= s->r_timings && 1050 addr < s->r_timings + asc->nregs_timings) || 1051 addr == s->r_ce_ctrl) { 1052 s->regs[addr] = value; 1053 } else if (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + asc->cs_num_max) { 1054 int cs = addr - s->r_ctrl0; 1055 aspeed_smc_flash_update_ctrl(&s->flashes[cs], value); 1056 } else if (addr >= R_SEG_ADDR0 && 1057 addr < R_SEG_ADDR0 + asc->cs_num_max) { 1058 int cs = addr - R_SEG_ADDR0; 1059 1060 if (value != s->regs[R_SEG_ADDR0 + cs]) { 1061 aspeed_smc_flash_set_segment(s, cs, value); 1062 } 1063 } else if (addr == R_CE_CMD_CTRL) { 1064 s->regs[addr] = value & 0xff; 1065 } else if (addr == R_DUMMY_DATA) { 1066 s->regs[addr] = value & 0xff; 1067 } else if (aspeed_smc_has_wdt_control(asc) && addr == R_FMC_WDT2_CTRL) { 1068 s->regs[addr] = value & FMC_WDT2_CTRL_EN; 1069 } else if (addr == R_INTR_CTRL) { 1070 s->regs[addr] = value; 1071 } else if (aspeed_smc_has_dma(asc) && addr == R_DMA_CTRL) { 1072 asc->dma_ctrl(s, value); 1073 } else if (aspeed_smc_has_dma(asc) && addr == R_DMA_DRAM_ADDR && 1074 aspeed_smc_dma_granted(s)) { 1075 s->regs[addr] = DMA_DRAM_ADDR(asc, value); 1076 } else if (aspeed_smc_has_dma(asc) && addr == R_DMA_FLASH_ADDR && 1077 aspeed_smc_dma_granted(s)) { 1078 s->regs[addr] = DMA_FLASH_ADDR(asc, value); 1079 } else if (aspeed_smc_has_dma(asc) && addr == R_DMA_LEN && 1080 aspeed_smc_dma_granted(s)) { 1081 s->regs[addr] = DMA_LENGTH(value); 1082 } else { 1083 qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n", 1084 __func__, addr); 1085 return; 1086 } 1087 } 1088 1089 static const MemoryRegionOps aspeed_smc_ops = { 1090 .read = aspeed_smc_read, 1091 .write = aspeed_smc_write, 1092 .endianness = DEVICE_LITTLE_ENDIAN, 1093 }; 1094 1095 static void aspeed_smc_instance_init(Object *obj) 1096 { 1097 AspeedSMCState *s = ASPEED_SMC(obj); 1098 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 1099 int i; 1100 1101 for (i = 0; i < asc->cs_num_max; i++) { 1102 object_initialize_child(obj, "flash[*]", &s->flashes[i], 1103 TYPE_ASPEED_SMC_FLASH); 1104 } 1105 } 1106 1107 /* 1108 * Initialize the custom address spaces for DMAs 1109 */ 1110 static void aspeed_smc_dma_setup(AspeedSMCState *s, Error **errp) 1111 { 1112 if (!s->dram_mr) { 1113 error_setg(errp, TYPE_ASPEED_SMC ": 'dram' link not set"); 1114 return; 1115 } 1116 1117 address_space_init(&s->flash_as, &s->mmio_flash, 1118 TYPE_ASPEED_SMC ".dma-flash"); 1119 address_space_init(&s->dram_as, s->dram_mr, 1120 TYPE_ASPEED_SMC ".dma-dram"); 1121 } 1122 1123 static void aspeed_smc_realize(DeviceState *dev, Error **errp) 1124 { 1125 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 1126 AspeedSMCState *s = ASPEED_SMC(dev); 1127 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 1128 int i; 1129 hwaddr offset = 0; 1130 1131 /* keep a copy under AspeedSMCState to speed up accesses */ 1132 s->r_conf = asc->r_conf; 1133 s->r_ce_ctrl = asc->r_ce_ctrl; 1134 s->r_ctrl0 = asc->r_ctrl0; 1135 s->r_timings = asc->r_timings; 1136 s->conf_enable_w0 = asc->conf_enable_w0; 1137 1138 /* DMA irq. Keep it first for the initialization in the SoC */ 1139 sysbus_init_irq(sbd, &s->irq); 1140 1141 s->spi = ssi_create_bus(dev, NULL); 1142 1143 /* Setup cs_lines for peripherals */ 1144 s->cs_lines = g_new0(qemu_irq, asc->cs_num_max); 1145 qdev_init_gpio_out_named(DEVICE(s), s->cs_lines, "cs", asc->cs_num_max); 1146 1147 /* The memory region for the controller registers */ 1148 memory_region_init_io(&s->mmio, OBJECT(s), &aspeed_smc_ops, s, 1149 TYPE_ASPEED_SMC, asc->nregs * 4); 1150 sysbus_init_mmio(sbd, &s->mmio); 1151 1152 /* 1153 * The container memory region representing the address space 1154 * window in which the flash modules are mapped. The size and 1155 * address depends on the SoC model and controller type. 1156 */ 1157 memory_region_init(&s->mmio_flash_container, OBJECT(s), 1158 TYPE_ASPEED_SMC ".container", 1159 asc->flash_window_size); 1160 sysbus_init_mmio(sbd, &s->mmio_flash_container); 1161 1162 memory_region_init_io(&s->mmio_flash, OBJECT(s), 1163 &aspeed_smc_flash_default_ops, s, 1164 TYPE_ASPEED_SMC ".flash", 1165 asc->flash_window_size); 1166 memory_region_add_subregion(&s->mmio_flash_container, 0x0, 1167 &s->mmio_flash); 1168 1169 /* 1170 * Let's create a sub memory region for each possible peripheral. All 1171 * have a configurable memory segment in the overall flash mapping 1172 * window of the controller but, there is not necessarily a flash 1173 * module behind to handle the memory accesses. This depends on 1174 * the board configuration. 1175 */ 1176 for (i = 0; i < asc->cs_num_max; ++i) { 1177 AspeedSMCFlash *fl = &s->flashes[i]; 1178 1179 if (!object_property_set_link(OBJECT(fl), "controller", OBJECT(s), 1180 errp)) { 1181 return; 1182 } 1183 if (!object_property_set_uint(OBJECT(fl), "cs", i, errp)) { 1184 return; 1185 } 1186 if (!sysbus_realize(SYS_BUS_DEVICE(fl), errp)) { 1187 return; 1188 } 1189 1190 memory_region_add_subregion(&s->mmio_flash, offset, &fl->mmio); 1191 offset += asc->segments[i].size; 1192 } 1193 1194 /* DMA support */ 1195 if (aspeed_smc_has_dma(asc)) { 1196 aspeed_smc_dma_setup(s, errp); 1197 } 1198 } 1199 1200 static const VMStateDescription vmstate_aspeed_smc = { 1201 .name = "aspeed.smc", 1202 .version_id = 2, 1203 .minimum_version_id = 2, 1204 .fields = (const VMStateField[]) { 1205 VMSTATE_UINT32_ARRAY(regs, AspeedSMCState, ASPEED_SMC_R_MAX), 1206 VMSTATE_UINT8(snoop_index, AspeedSMCState), 1207 VMSTATE_UINT8(snoop_dummies, AspeedSMCState), 1208 VMSTATE_END_OF_LIST() 1209 } 1210 }; 1211 1212 static Property aspeed_smc_properties[] = { 1213 DEFINE_PROP_BOOL("inject-failure", AspeedSMCState, inject_failure, false), 1214 DEFINE_PROP_LINK("dram", AspeedSMCState, dram_mr, 1215 TYPE_MEMORY_REGION, MemoryRegion *), 1216 DEFINE_PROP_END_OF_LIST(), 1217 }; 1218 1219 static void aspeed_smc_class_init(ObjectClass *klass, void *data) 1220 { 1221 DeviceClass *dc = DEVICE_CLASS(klass); 1222 1223 dc->realize = aspeed_smc_realize; 1224 dc->reset = aspeed_smc_reset; 1225 device_class_set_props(dc, aspeed_smc_properties); 1226 dc->vmsd = &vmstate_aspeed_smc; 1227 } 1228 1229 static const TypeInfo aspeed_smc_info = { 1230 .name = TYPE_ASPEED_SMC, 1231 .parent = TYPE_SYS_BUS_DEVICE, 1232 .instance_init = aspeed_smc_instance_init, 1233 .instance_size = sizeof(AspeedSMCState), 1234 .class_size = sizeof(AspeedSMCClass), 1235 .class_init = aspeed_smc_class_init, 1236 .abstract = true, 1237 }; 1238 1239 static void aspeed_smc_flash_realize(DeviceState *dev, Error **errp) 1240 { 1241 AspeedSMCFlash *s = ASPEED_SMC_FLASH(dev); 1242 g_autofree char *name = g_strdup_printf(TYPE_ASPEED_SMC_FLASH ".%d", s->cs); 1243 1244 if (!s->controller) { 1245 error_setg(errp, TYPE_ASPEED_SMC_FLASH ": 'controller' link not set"); 1246 return; 1247 } 1248 1249 s->asc = ASPEED_SMC_GET_CLASS(s->controller); 1250 1251 /* 1252 * Use the default segment value to size the memory region. This 1253 * can be changed by FW at runtime. 1254 */ 1255 memory_region_init_io(&s->mmio, OBJECT(s), &aspeed_smc_flash_ops, 1256 s, name, s->asc->segments[s->cs].size); 1257 sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio); 1258 } 1259 1260 static Property aspeed_smc_flash_properties[] = { 1261 DEFINE_PROP_UINT8("cs", AspeedSMCFlash, cs, 0), 1262 DEFINE_PROP_LINK("controller", AspeedSMCFlash, controller, TYPE_ASPEED_SMC, 1263 AspeedSMCState *), 1264 DEFINE_PROP_END_OF_LIST(), 1265 }; 1266 1267 static void aspeed_smc_flash_class_init(ObjectClass *klass, void *data) 1268 { 1269 DeviceClass *dc = DEVICE_CLASS(klass); 1270 1271 dc->desc = "Aspeed SMC Flash device region"; 1272 dc->realize = aspeed_smc_flash_realize; 1273 device_class_set_props(dc, aspeed_smc_flash_properties); 1274 } 1275 1276 static const TypeInfo aspeed_smc_flash_info = { 1277 .name = TYPE_ASPEED_SMC_FLASH, 1278 .parent = TYPE_SYS_BUS_DEVICE, 1279 .instance_size = sizeof(AspeedSMCFlash), 1280 .class_init = aspeed_smc_flash_class_init, 1281 }; 1282 1283 /* 1284 * The Segment Registers of the AST2400 and AST2500 have a 8MB 1285 * unit. The address range of a flash SPI peripheral is encoded with 1286 * absolute addresses which should be part of the overall controller 1287 * window. 1288 */ 1289 static uint32_t aspeed_smc_segment_to_reg(const AspeedSMCState *s, 1290 const AspeedSegments *seg) 1291 { 1292 uint32_t reg = 0; 1293 reg |= ((seg->addr >> 23) & SEG_START_MASK) << SEG_START_SHIFT; 1294 reg |= (((seg->addr + seg->size) >> 23) & SEG_END_MASK) << SEG_END_SHIFT; 1295 return reg; 1296 } 1297 1298 static void aspeed_smc_reg_to_segment(const AspeedSMCState *s, 1299 uint32_t reg, AspeedSegments *seg) 1300 { 1301 seg->addr = ((reg >> SEG_START_SHIFT) & SEG_START_MASK) << 23; 1302 seg->size = (((reg >> SEG_END_SHIFT) & SEG_END_MASK) << 23) - seg->addr; 1303 } 1304 1305 static const AspeedSegments aspeed_2400_smc_segments[] = { 1306 { 0x10000000, 32 * MiB }, 1307 }; 1308 1309 static void aspeed_2400_smc_class_init(ObjectClass *klass, void *data) 1310 { 1311 DeviceClass *dc = DEVICE_CLASS(klass); 1312 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1313 1314 dc->desc = "Aspeed 2400 SMC Controller"; 1315 asc->r_conf = R_CONF; 1316 asc->r_ce_ctrl = R_CE_CTRL; 1317 asc->r_ctrl0 = R_CTRL0; 1318 asc->r_timings = R_TIMINGS; 1319 asc->nregs_timings = 1; 1320 asc->conf_enable_w0 = CONF_ENABLE_W0; 1321 asc->cs_num_max = 1; 1322 asc->segments = aspeed_2400_smc_segments; 1323 asc->flash_window_base = 0x10000000; 1324 asc->flash_window_size = 0x6000000; 1325 asc->features = 0x0; 1326 asc->nregs = ASPEED_SMC_R_SMC_MAX; 1327 asc->segment_to_reg = aspeed_smc_segment_to_reg; 1328 asc->reg_to_segment = aspeed_smc_reg_to_segment; 1329 asc->dma_ctrl = aspeed_smc_dma_ctrl; 1330 } 1331 1332 static const TypeInfo aspeed_2400_smc_info = { 1333 .name = "aspeed.smc-ast2400", 1334 .parent = TYPE_ASPEED_SMC, 1335 .class_init = aspeed_2400_smc_class_init, 1336 }; 1337 1338 static const uint32_t aspeed_2400_fmc_resets[ASPEED_SMC_R_MAX] = { 1339 /* 1340 * CE0 and CE1 types are HW strapped in SCU70. Do it here to 1341 * simplify the model. 1342 */ 1343 [R_CONF] = CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0, 1344 }; 1345 1346 static const AspeedSegments aspeed_2400_fmc_segments[] = { 1347 { 0x20000000, 64 * MiB }, /* start address is readonly */ 1348 { 0x24000000, 32 * MiB }, 1349 { 0x26000000, 32 * MiB }, 1350 { 0x28000000, 32 * MiB }, 1351 { 0x2A000000, 32 * MiB } 1352 }; 1353 1354 static void aspeed_2400_fmc_class_init(ObjectClass *klass, void *data) 1355 { 1356 DeviceClass *dc = DEVICE_CLASS(klass); 1357 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1358 1359 dc->desc = "Aspeed 2400 FMC Controller"; 1360 asc->r_conf = R_CONF; 1361 asc->r_ce_ctrl = R_CE_CTRL; 1362 asc->r_ctrl0 = R_CTRL0; 1363 asc->r_timings = R_TIMINGS; 1364 asc->nregs_timings = 1; 1365 asc->conf_enable_w0 = CONF_ENABLE_W0; 1366 asc->cs_num_max = 5; 1367 asc->segments = aspeed_2400_fmc_segments; 1368 asc->segment_addr_mask = 0xffff0000; 1369 asc->resets = aspeed_2400_fmc_resets; 1370 asc->flash_window_base = 0x20000000; 1371 asc->flash_window_size = 0x10000000; 1372 asc->features = ASPEED_SMC_FEATURE_DMA; 1373 asc->dma_flash_mask = 0x0FFFFFFC; 1374 asc->dma_dram_mask = 0x1FFFFFFC; 1375 asc->nregs = ASPEED_SMC_R_MAX; 1376 asc->segment_to_reg = aspeed_smc_segment_to_reg; 1377 asc->reg_to_segment = aspeed_smc_reg_to_segment; 1378 asc->dma_ctrl = aspeed_smc_dma_ctrl; 1379 } 1380 1381 static const TypeInfo aspeed_2400_fmc_info = { 1382 .name = "aspeed.fmc-ast2400", 1383 .parent = TYPE_ASPEED_SMC, 1384 .class_init = aspeed_2400_fmc_class_init, 1385 }; 1386 1387 static const AspeedSegments aspeed_2400_spi1_segments[] = { 1388 { 0x30000000, 64 * MiB }, 1389 }; 1390 1391 static int aspeed_2400_spi1_addr_width(const AspeedSMCState *s) 1392 { 1393 return s->regs[R_SPI_CTRL0] & CTRL_AST2400_SPI_4BYTE ? 4 : 3; 1394 } 1395 1396 static void aspeed_2400_spi1_class_init(ObjectClass *klass, void *data) 1397 { 1398 DeviceClass *dc = DEVICE_CLASS(klass); 1399 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1400 1401 dc->desc = "Aspeed 2400 SPI1 Controller"; 1402 asc->r_conf = R_SPI_CONF; 1403 asc->r_ce_ctrl = 0xff; 1404 asc->r_ctrl0 = R_SPI_CTRL0; 1405 asc->r_timings = R_SPI_TIMINGS; 1406 asc->nregs_timings = 1; 1407 asc->conf_enable_w0 = SPI_CONF_ENABLE_W0; 1408 asc->cs_num_max = 1; 1409 asc->segments = aspeed_2400_spi1_segments; 1410 asc->flash_window_base = 0x30000000; 1411 asc->flash_window_size = 0x10000000; 1412 asc->features = 0x0; 1413 asc->nregs = ASPEED_SMC_R_SPI_MAX; 1414 asc->segment_to_reg = aspeed_smc_segment_to_reg; 1415 asc->reg_to_segment = aspeed_smc_reg_to_segment; 1416 asc->dma_ctrl = aspeed_smc_dma_ctrl; 1417 asc->addr_width = aspeed_2400_spi1_addr_width; 1418 } 1419 1420 static const TypeInfo aspeed_2400_spi1_info = { 1421 .name = "aspeed.spi1-ast2400", 1422 .parent = TYPE_ASPEED_SMC, 1423 .class_init = aspeed_2400_spi1_class_init, 1424 }; 1425 1426 static const uint32_t aspeed_2500_fmc_resets[ASPEED_SMC_R_MAX] = { 1427 [R_CONF] = (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0 | 1428 CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE1), 1429 }; 1430 1431 static const AspeedSegments aspeed_2500_fmc_segments[] = { 1432 { 0x20000000, 128 * MiB }, /* start address is readonly */ 1433 { 0x28000000, 32 * MiB }, 1434 { 0x2A000000, 32 * MiB }, 1435 }; 1436 1437 static void aspeed_2500_fmc_class_init(ObjectClass *klass, void *data) 1438 { 1439 DeviceClass *dc = DEVICE_CLASS(klass); 1440 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1441 1442 dc->desc = "Aspeed 2600 FMC Controller"; 1443 asc->r_conf = R_CONF; 1444 asc->r_ce_ctrl = R_CE_CTRL; 1445 asc->r_ctrl0 = R_CTRL0; 1446 asc->r_timings = R_TIMINGS; 1447 asc->nregs_timings = 1; 1448 asc->conf_enable_w0 = CONF_ENABLE_W0; 1449 asc->cs_num_max = 3; 1450 asc->segments = aspeed_2500_fmc_segments; 1451 asc->segment_addr_mask = 0xffff0000; 1452 asc->resets = aspeed_2500_fmc_resets; 1453 asc->flash_window_base = 0x20000000; 1454 asc->flash_window_size = 0x10000000; 1455 asc->features = ASPEED_SMC_FEATURE_DMA; 1456 asc->dma_flash_mask = 0x0FFFFFFC; 1457 asc->dma_dram_mask = 0x3FFFFFFC; 1458 asc->nregs = ASPEED_SMC_R_MAX; 1459 asc->segment_to_reg = aspeed_smc_segment_to_reg; 1460 asc->reg_to_segment = aspeed_smc_reg_to_segment; 1461 asc->dma_ctrl = aspeed_smc_dma_ctrl; 1462 } 1463 1464 static const TypeInfo aspeed_2500_fmc_info = { 1465 .name = "aspeed.fmc-ast2500", 1466 .parent = TYPE_ASPEED_SMC, 1467 .class_init = aspeed_2500_fmc_class_init, 1468 }; 1469 1470 static const AspeedSegments aspeed_2500_spi1_segments[] = { 1471 { 0x30000000, 32 * MiB }, /* start address is readonly */ 1472 { 0x32000000, 96 * MiB }, /* end address is readonly */ 1473 }; 1474 1475 static void aspeed_2500_spi1_class_init(ObjectClass *klass, void *data) 1476 { 1477 DeviceClass *dc = DEVICE_CLASS(klass); 1478 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1479 1480 dc->desc = "Aspeed 2600 SPI1 Controller"; 1481 asc->r_conf = R_CONF; 1482 asc->r_ce_ctrl = R_CE_CTRL; 1483 asc->r_ctrl0 = R_CTRL0; 1484 asc->r_timings = R_TIMINGS; 1485 asc->nregs_timings = 1; 1486 asc->conf_enable_w0 = CONF_ENABLE_W0; 1487 asc->cs_num_max = 2; 1488 asc->segments = aspeed_2500_spi1_segments; 1489 asc->segment_addr_mask = 0xffff0000; 1490 asc->flash_window_base = 0x30000000; 1491 asc->flash_window_size = 0x8000000; 1492 asc->features = 0x0; 1493 asc->nregs = ASPEED_SMC_R_MAX; 1494 asc->segment_to_reg = aspeed_smc_segment_to_reg; 1495 asc->reg_to_segment = aspeed_smc_reg_to_segment; 1496 asc->dma_ctrl = aspeed_smc_dma_ctrl; 1497 } 1498 1499 static const TypeInfo aspeed_2500_spi1_info = { 1500 .name = "aspeed.spi1-ast2500", 1501 .parent = TYPE_ASPEED_SMC, 1502 .class_init = aspeed_2500_spi1_class_init, 1503 }; 1504 1505 static const AspeedSegments aspeed_2500_spi2_segments[] = { 1506 { 0x38000000, 32 * MiB }, /* start address is readonly */ 1507 { 0x3A000000, 96 * MiB }, /* end address is readonly */ 1508 }; 1509 1510 static void aspeed_2500_spi2_class_init(ObjectClass *klass, void *data) 1511 { 1512 DeviceClass *dc = DEVICE_CLASS(klass); 1513 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1514 1515 dc->desc = "Aspeed 2600 SPI2 Controller"; 1516 asc->r_conf = R_CONF; 1517 asc->r_ce_ctrl = R_CE_CTRL; 1518 asc->r_ctrl0 = R_CTRL0; 1519 asc->r_timings = R_TIMINGS; 1520 asc->nregs_timings = 1; 1521 asc->conf_enable_w0 = CONF_ENABLE_W0; 1522 asc->cs_num_max = 2; 1523 asc->segments = aspeed_2500_spi2_segments; 1524 asc->segment_addr_mask = 0xffff0000; 1525 asc->flash_window_base = 0x38000000; 1526 asc->flash_window_size = 0x8000000; 1527 asc->features = 0x0; 1528 asc->nregs = ASPEED_SMC_R_MAX; 1529 asc->segment_to_reg = aspeed_smc_segment_to_reg; 1530 asc->reg_to_segment = aspeed_smc_reg_to_segment; 1531 asc->dma_ctrl = aspeed_smc_dma_ctrl; 1532 } 1533 1534 static const TypeInfo aspeed_2500_spi2_info = { 1535 .name = "aspeed.spi2-ast2500", 1536 .parent = TYPE_ASPEED_SMC, 1537 .class_init = aspeed_2500_spi2_class_init, 1538 }; 1539 1540 /* 1541 * The Segment Registers of the AST2600 have a 1MB unit. The address 1542 * range of a flash SPI peripheral is encoded with offsets in the overall 1543 * controller window. The previous SoC AST2400 and AST2500 used 1544 * absolute addresses. Only bits [27:20] are relevant and the end 1545 * address is an upper bound limit. 1546 */ 1547 #define AST2600_SEG_ADDR_MASK 0x0ff00000 1548 1549 static uint32_t aspeed_2600_smc_segment_to_reg(const AspeedSMCState *s, 1550 const AspeedSegments *seg) 1551 { 1552 uint32_t reg = 0; 1553 1554 /* Disabled segments have a nil register */ 1555 if (!seg->size) { 1556 return 0; 1557 } 1558 1559 reg |= (seg->addr & AST2600_SEG_ADDR_MASK) >> 16; /* start offset */ 1560 reg |= (seg->addr + seg->size - 1) & AST2600_SEG_ADDR_MASK; /* end offset */ 1561 return reg; 1562 } 1563 1564 static void aspeed_2600_smc_reg_to_segment(const AspeedSMCState *s, 1565 uint32_t reg, AspeedSegments *seg) 1566 { 1567 uint32_t start_offset = (reg << 16) & AST2600_SEG_ADDR_MASK; 1568 uint32_t end_offset = reg & AST2600_SEG_ADDR_MASK; 1569 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 1570 1571 if (reg) { 1572 seg->addr = asc->flash_window_base + start_offset; 1573 seg->size = end_offset + MiB - start_offset; 1574 } else { 1575 seg->addr = asc->flash_window_base; 1576 seg->size = 0; 1577 } 1578 } 1579 1580 static const uint32_t aspeed_2600_fmc_resets[ASPEED_SMC_R_MAX] = { 1581 [R_CONF] = (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0 | 1582 CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE1 | 1583 CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE2), 1584 }; 1585 1586 static const AspeedSegments aspeed_2600_fmc_segments[] = { 1587 { 0x0, 128 * MiB }, /* start address is readonly */ 1588 { 128 * MiB, 128 * MiB }, /* default is disabled but needed for -kernel */ 1589 { 0x0, 0 }, /* disabled */ 1590 }; 1591 1592 static void aspeed_2600_fmc_class_init(ObjectClass *klass, void *data) 1593 { 1594 DeviceClass *dc = DEVICE_CLASS(klass); 1595 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1596 1597 dc->desc = "Aspeed 2600 FMC Controller"; 1598 asc->r_conf = R_CONF; 1599 asc->r_ce_ctrl = R_CE_CTRL; 1600 asc->r_ctrl0 = R_CTRL0; 1601 asc->r_timings = R_TIMINGS; 1602 asc->nregs_timings = 1; 1603 asc->conf_enable_w0 = CONF_ENABLE_W0; 1604 asc->cs_num_max = 3; 1605 asc->segments = aspeed_2600_fmc_segments; 1606 asc->segment_addr_mask = 0x0ff00ff0; 1607 asc->resets = aspeed_2600_fmc_resets; 1608 asc->flash_window_base = 0x20000000; 1609 asc->flash_window_size = 0x10000000; 1610 asc->features = ASPEED_SMC_FEATURE_DMA | 1611 ASPEED_SMC_FEATURE_WDT_CONTROL; 1612 asc->dma_flash_mask = 0x0FFFFFFC; 1613 asc->dma_dram_mask = 0x3FFFFFFC; 1614 asc->nregs = ASPEED_SMC_R_MAX; 1615 asc->segment_to_reg = aspeed_2600_smc_segment_to_reg; 1616 asc->reg_to_segment = aspeed_2600_smc_reg_to_segment; 1617 asc->dma_ctrl = aspeed_2600_smc_dma_ctrl; 1618 } 1619 1620 static const TypeInfo aspeed_2600_fmc_info = { 1621 .name = "aspeed.fmc-ast2600", 1622 .parent = TYPE_ASPEED_SMC, 1623 .class_init = aspeed_2600_fmc_class_init, 1624 }; 1625 1626 static const AspeedSegments aspeed_2600_spi1_segments[] = { 1627 { 0x0, 128 * MiB }, /* start address is readonly */ 1628 { 0x0, 0 }, /* disabled */ 1629 }; 1630 1631 static void aspeed_2600_spi1_class_init(ObjectClass *klass, void *data) 1632 { 1633 DeviceClass *dc = DEVICE_CLASS(klass); 1634 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1635 1636 dc->desc = "Aspeed 2600 SPI1 Controller"; 1637 asc->r_conf = R_CONF; 1638 asc->r_ce_ctrl = R_CE_CTRL; 1639 asc->r_ctrl0 = R_CTRL0; 1640 asc->r_timings = R_TIMINGS; 1641 asc->nregs_timings = 2; 1642 asc->conf_enable_w0 = CONF_ENABLE_W0; 1643 asc->cs_num_max = 2; 1644 asc->segments = aspeed_2600_spi1_segments; 1645 asc->segment_addr_mask = 0x0ff00ff0; 1646 asc->flash_window_base = 0x30000000; 1647 asc->flash_window_size = 0x10000000; 1648 asc->features = ASPEED_SMC_FEATURE_DMA | 1649 ASPEED_SMC_FEATURE_DMA_GRANT; 1650 asc->dma_flash_mask = 0x0FFFFFFC; 1651 asc->dma_dram_mask = 0x3FFFFFFC; 1652 asc->nregs = ASPEED_SMC_R_MAX; 1653 asc->segment_to_reg = aspeed_2600_smc_segment_to_reg; 1654 asc->reg_to_segment = aspeed_2600_smc_reg_to_segment; 1655 asc->dma_ctrl = aspeed_2600_smc_dma_ctrl; 1656 } 1657 1658 static const TypeInfo aspeed_2600_spi1_info = { 1659 .name = "aspeed.spi1-ast2600", 1660 .parent = TYPE_ASPEED_SMC, 1661 .class_init = aspeed_2600_spi1_class_init, 1662 }; 1663 1664 static const AspeedSegments aspeed_2600_spi2_segments[] = { 1665 { 0x0, 128 * MiB }, /* start address is readonly */ 1666 { 0x0, 0 }, /* disabled */ 1667 { 0x0, 0 }, /* disabled */ 1668 }; 1669 1670 static void aspeed_2600_spi2_class_init(ObjectClass *klass, void *data) 1671 { 1672 DeviceClass *dc = DEVICE_CLASS(klass); 1673 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1674 1675 dc->desc = "Aspeed 2600 SPI2 Controller"; 1676 asc->r_conf = R_CONF; 1677 asc->r_ce_ctrl = R_CE_CTRL; 1678 asc->r_ctrl0 = R_CTRL0; 1679 asc->r_timings = R_TIMINGS; 1680 asc->nregs_timings = 3; 1681 asc->conf_enable_w0 = CONF_ENABLE_W0; 1682 asc->cs_num_max = 3; 1683 asc->segments = aspeed_2600_spi2_segments; 1684 asc->segment_addr_mask = 0x0ff00ff0; 1685 asc->flash_window_base = 0x50000000; 1686 asc->flash_window_size = 0x10000000; 1687 asc->features = ASPEED_SMC_FEATURE_DMA | 1688 ASPEED_SMC_FEATURE_DMA_GRANT; 1689 asc->dma_flash_mask = 0x0FFFFFFC; 1690 asc->dma_dram_mask = 0x3FFFFFFC; 1691 asc->nregs = ASPEED_SMC_R_MAX; 1692 asc->segment_to_reg = aspeed_2600_smc_segment_to_reg; 1693 asc->reg_to_segment = aspeed_2600_smc_reg_to_segment; 1694 asc->dma_ctrl = aspeed_2600_smc_dma_ctrl; 1695 } 1696 1697 static const TypeInfo aspeed_2600_spi2_info = { 1698 .name = "aspeed.spi2-ast2600", 1699 .parent = TYPE_ASPEED_SMC, 1700 .class_init = aspeed_2600_spi2_class_init, 1701 }; 1702 1703 /* 1704 * The FMC Segment Registers of the AST1030 have a 512KB unit. 1705 * Only bits [27:19] are used for decoding. 1706 */ 1707 #define AST1030_SEG_ADDR_MASK 0x0ff80000 1708 1709 static uint32_t aspeed_1030_smc_segment_to_reg(const AspeedSMCState *s, 1710 const AspeedSegments *seg) 1711 { 1712 uint32_t reg = 0; 1713 1714 /* Disabled segments have a nil register */ 1715 if (!seg->size) { 1716 return 0; 1717 } 1718 1719 reg |= (seg->addr & AST1030_SEG_ADDR_MASK) >> 16; /* start offset */ 1720 reg |= (seg->addr + seg->size - 1) & AST1030_SEG_ADDR_MASK; /* end offset */ 1721 return reg; 1722 } 1723 1724 static void aspeed_1030_smc_reg_to_segment(const AspeedSMCState *s, 1725 uint32_t reg, AspeedSegments *seg) 1726 { 1727 uint32_t start_offset = (reg << 16) & AST1030_SEG_ADDR_MASK; 1728 uint32_t end_offset = reg & AST1030_SEG_ADDR_MASK; 1729 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 1730 1731 if (reg) { 1732 seg->addr = asc->flash_window_base + start_offset; 1733 seg->size = end_offset + (512 * KiB) - start_offset; 1734 } else { 1735 seg->addr = asc->flash_window_base; 1736 seg->size = 0; 1737 } 1738 } 1739 1740 static const uint32_t aspeed_1030_fmc_resets[ASPEED_SMC_R_MAX] = { 1741 [R_CONF] = (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0 | 1742 CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE1), 1743 }; 1744 1745 static const AspeedSegments aspeed_1030_fmc_segments[] = { 1746 { 0x0, 128 * MiB }, /* start address is readonly */ 1747 { 128 * MiB, 128 * MiB }, /* default is disabled but needed for -kernel */ 1748 { 0x0, 0 }, /* disabled */ 1749 }; 1750 1751 static void aspeed_1030_fmc_class_init(ObjectClass *klass, void *data) 1752 { 1753 DeviceClass *dc = DEVICE_CLASS(klass); 1754 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1755 1756 dc->desc = "Aspeed 1030 FMC Controller"; 1757 asc->r_conf = R_CONF; 1758 asc->r_ce_ctrl = R_CE_CTRL; 1759 asc->r_ctrl0 = R_CTRL0; 1760 asc->r_timings = R_TIMINGS; 1761 asc->nregs_timings = 2; 1762 asc->conf_enable_w0 = CONF_ENABLE_W0; 1763 asc->cs_num_max = 2; 1764 asc->segments = aspeed_1030_fmc_segments; 1765 asc->segment_addr_mask = 0x0ff80ff8; 1766 asc->resets = aspeed_1030_fmc_resets; 1767 asc->flash_window_base = 0x80000000; 1768 asc->flash_window_size = 0x10000000; 1769 asc->features = ASPEED_SMC_FEATURE_DMA; 1770 asc->dma_flash_mask = 0x0FFFFFFC; 1771 asc->dma_dram_mask = 0x000BFFFC; 1772 asc->nregs = ASPEED_SMC_R_MAX; 1773 asc->segment_to_reg = aspeed_1030_smc_segment_to_reg; 1774 asc->reg_to_segment = aspeed_1030_smc_reg_to_segment; 1775 asc->dma_ctrl = aspeed_2600_smc_dma_ctrl; 1776 } 1777 1778 static const TypeInfo aspeed_1030_fmc_info = { 1779 .name = "aspeed.fmc-ast1030", 1780 .parent = TYPE_ASPEED_SMC, 1781 .class_init = aspeed_1030_fmc_class_init, 1782 }; 1783 1784 static const AspeedSegments aspeed_1030_spi1_segments[] = { 1785 { 0x0, 128 * MiB }, /* start address is readonly */ 1786 { 0x0, 0 }, /* disabled */ 1787 }; 1788 1789 static void aspeed_1030_spi1_class_init(ObjectClass *klass, void *data) 1790 { 1791 DeviceClass *dc = DEVICE_CLASS(klass); 1792 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1793 1794 dc->desc = "Aspeed 1030 SPI1 Controller"; 1795 asc->r_conf = R_CONF; 1796 asc->r_ce_ctrl = R_CE_CTRL; 1797 asc->r_ctrl0 = R_CTRL0; 1798 asc->r_timings = R_TIMINGS; 1799 asc->nregs_timings = 2; 1800 asc->conf_enable_w0 = CONF_ENABLE_W0; 1801 asc->cs_num_max = 2; 1802 asc->segments = aspeed_1030_spi1_segments; 1803 asc->segment_addr_mask = 0x0ff00ff0; 1804 asc->flash_window_base = 0x90000000; 1805 asc->flash_window_size = 0x10000000; 1806 asc->features = ASPEED_SMC_FEATURE_DMA; 1807 asc->dma_flash_mask = 0x0FFFFFFC; 1808 asc->dma_dram_mask = 0x000BFFFC; 1809 asc->nregs = ASPEED_SMC_R_MAX; 1810 asc->segment_to_reg = aspeed_2600_smc_segment_to_reg; 1811 asc->reg_to_segment = aspeed_2600_smc_reg_to_segment; 1812 asc->dma_ctrl = aspeed_2600_smc_dma_ctrl; 1813 } 1814 1815 static const TypeInfo aspeed_1030_spi1_info = { 1816 .name = "aspeed.spi1-ast1030", 1817 .parent = TYPE_ASPEED_SMC, 1818 .class_init = aspeed_1030_spi1_class_init, 1819 }; 1820 static const AspeedSegments aspeed_1030_spi2_segments[] = { 1821 { 0x0, 128 * MiB }, /* start address is readonly */ 1822 { 0x0, 0 }, /* disabled */ 1823 }; 1824 1825 static void aspeed_1030_spi2_class_init(ObjectClass *klass, void *data) 1826 { 1827 DeviceClass *dc = DEVICE_CLASS(klass); 1828 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1829 1830 dc->desc = "Aspeed 1030 SPI2 Controller"; 1831 asc->r_conf = R_CONF; 1832 asc->r_ce_ctrl = R_CE_CTRL; 1833 asc->r_ctrl0 = R_CTRL0; 1834 asc->r_timings = R_TIMINGS; 1835 asc->nregs_timings = 2; 1836 asc->conf_enable_w0 = CONF_ENABLE_W0; 1837 asc->cs_num_max = 2; 1838 asc->segments = aspeed_1030_spi2_segments; 1839 asc->segment_addr_mask = 0x0ff00ff0; 1840 asc->flash_window_base = 0xb0000000; 1841 asc->flash_window_size = 0x10000000; 1842 asc->features = ASPEED_SMC_FEATURE_DMA; 1843 asc->dma_flash_mask = 0x0FFFFFFC; 1844 asc->dma_dram_mask = 0x000BFFFC; 1845 asc->nregs = ASPEED_SMC_R_MAX; 1846 asc->segment_to_reg = aspeed_2600_smc_segment_to_reg; 1847 asc->reg_to_segment = aspeed_2600_smc_reg_to_segment; 1848 asc->dma_ctrl = aspeed_2600_smc_dma_ctrl; 1849 } 1850 1851 static const TypeInfo aspeed_1030_spi2_info = { 1852 .name = "aspeed.spi2-ast1030", 1853 .parent = TYPE_ASPEED_SMC, 1854 .class_init = aspeed_1030_spi2_class_init, 1855 }; 1856 1857 static void aspeed_smc_register_types(void) 1858 { 1859 type_register_static(&aspeed_smc_flash_info); 1860 type_register_static(&aspeed_smc_info); 1861 type_register_static(&aspeed_2400_smc_info); 1862 type_register_static(&aspeed_2400_fmc_info); 1863 type_register_static(&aspeed_2400_spi1_info); 1864 type_register_static(&aspeed_2500_fmc_info); 1865 type_register_static(&aspeed_2500_spi1_info); 1866 type_register_static(&aspeed_2500_spi2_info); 1867 type_register_static(&aspeed_2600_fmc_info); 1868 type_register_static(&aspeed_2600_spi1_info); 1869 type_register_static(&aspeed_2600_spi2_info); 1870 type_register_static(&aspeed_1030_fmc_info); 1871 type_register_static(&aspeed_1030_spi1_info); 1872 type_register_static(&aspeed_1030_spi2_info); 1873 } 1874 1875 type_init(aspeed_smc_register_types) 1876