1 /* 2 * ASPEED AST2400 SMC Controller (SPI Flash Only) 3 * 4 * Copyright (C) 2016 IBM Corp. 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include "qemu/osdep.h" 26 #include "hw/block/flash.h" 27 #include "hw/sysbus.h" 28 #include "migration/vmstate.h" 29 #include "qemu/log.h" 30 #include "qemu/module.h" 31 #include "qemu/error-report.h" 32 #include "qapi/error.h" 33 #include "qemu/units.h" 34 #include "trace.h" 35 36 #include "hw/irq.h" 37 #include "hw/qdev-properties.h" 38 #include "hw/ssi/aspeed_smc.h" 39 40 /* CE Type Setting Register */ 41 #define R_CONF (0x00 / 4) 42 #define CONF_LEGACY_DISABLE (1 << 31) 43 #define CONF_ENABLE_W4 20 44 #define CONF_ENABLE_W3 19 45 #define CONF_ENABLE_W2 18 46 #define CONF_ENABLE_W1 17 47 #define CONF_ENABLE_W0 16 48 #define CONF_FLASH_TYPE4 8 49 #define CONF_FLASH_TYPE3 6 50 #define CONF_FLASH_TYPE2 4 51 #define CONF_FLASH_TYPE1 2 52 #define CONF_FLASH_TYPE0 0 53 #define CONF_FLASH_TYPE_NOR 0x0 54 #define CONF_FLASH_TYPE_NAND 0x1 55 #define CONF_FLASH_TYPE_SPI 0x2 /* AST2600 is SPI only */ 56 57 /* CE Control Register */ 58 #define R_CE_CTRL (0x04 / 4) 59 #define CTRL_EXTENDED4 4 /* 32 bit addressing for SPI */ 60 #define CTRL_EXTENDED3 3 /* 32 bit addressing for SPI */ 61 #define CTRL_EXTENDED2 2 /* 32 bit addressing for SPI */ 62 #define CTRL_EXTENDED1 1 /* 32 bit addressing for SPI */ 63 #define CTRL_EXTENDED0 0 /* 32 bit addressing for SPI */ 64 65 /* Interrupt Control and Status Register */ 66 #define R_INTR_CTRL (0x08 / 4) 67 #define INTR_CTRL_DMA_STATUS (1 << 11) 68 #define INTR_CTRL_CMD_ABORT_STATUS (1 << 10) 69 #define INTR_CTRL_WRITE_PROTECT_STATUS (1 << 9) 70 #define INTR_CTRL_DMA_EN (1 << 3) 71 #define INTR_CTRL_CMD_ABORT_EN (1 << 2) 72 #define INTR_CTRL_WRITE_PROTECT_EN (1 << 1) 73 74 /* Command Control Register */ 75 #define R_CE_CMD_CTRL (0x0C / 4) 76 #define CTRL_ADDR_BYTE0_DISABLE_SHIFT 4 77 #define CTRL_DATA_BYTE0_DISABLE_SHIFT 0 78 79 #define aspeed_smc_addr_byte_enabled(s, i) \ 80 (!((s)->regs[R_CE_CMD_CTRL] & (1 << (CTRL_ADDR_BYTE0_DISABLE_SHIFT + (i))))) 81 #define aspeed_smc_data_byte_enabled(s, i) \ 82 (!((s)->regs[R_CE_CMD_CTRL] & (1 << (CTRL_DATA_BYTE0_DISABLE_SHIFT + (i))))) 83 84 /* CEx Control Register */ 85 #define R_CTRL0 (0x10 / 4) 86 #define CTRL_IO_QPI (1 << 31) 87 #define CTRL_IO_QUAD_DATA (1 << 30) 88 #define CTRL_IO_DUAL_DATA (1 << 29) 89 #define CTRL_IO_DUAL_ADDR_DATA (1 << 28) /* Includes dummies */ 90 #define CTRL_IO_QUAD_ADDR_DATA (1 << 28) /* Includes dummies */ 91 #define CTRL_CMD_SHIFT 16 92 #define CTRL_CMD_MASK 0xff 93 #define CTRL_DUMMY_HIGH_SHIFT 14 94 #define CTRL_AST2400_SPI_4BYTE (1 << 13) 95 #define CE_CTRL_CLOCK_FREQ_SHIFT 8 96 #define CE_CTRL_CLOCK_FREQ_MASK 0xf 97 #define CE_CTRL_CLOCK_FREQ(div) \ 98 (((div) & CE_CTRL_CLOCK_FREQ_MASK) << CE_CTRL_CLOCK_FREQ_SHIFT) 99 #define CTRL_DUMMY_LOW_SHIFT 6 /* 2 bits [7:6] */ 100 #define CTRL_CE_STOP_ACTIVE (1 << 2) 101 #define CTRL_CMD_MODE_MASK 0x3 102 #define CTRL_READMODE 0x0 103 #define CTRL_FREADMODE 0x1 104 #define CTRL_WRITEMODE 0x2 105 #define CTRL_USERMODE 0x3 106 #define R_CTRL1 (0x14 / 4) 107 #define R_CTRL2 (0x18 / 4) 108 #define R_CTRL3 (0x1C / 4) 109 #define R_CTRL4 (0x20 / 4) 110 111 /* CEx Segment Address Register */ 112 #define R_SEG_ADDR0 (0x30 / 4) 113 #define SEG_END_SHIFT 24 /* 8MB units */ 114 #define SEG_END_MASK 0xff 115 #define SEG_START_SHIFT 16 /* address bit [A29-A23] */ 116 #define SEG_START_MASK 0xff 117 #define R_SEG_ADDR1 (0x34 / 4) 118 #define R_SEG_ADDR2 (0x38 / 4) 119 #define R_SEG_ADDR3 (0x3C / 4) 120 #define R_SEG_ADDR4 (0x40 / 4) 121 122 /* Misc Control Register #1 */ 123 #define R_MISC_CTRL1 (0x50 / 4) 124 125 /* SPI dummy cycle data */ 126 #define R_DUMMY_DATA (0x54 / 4) 127 128 /* FMC_WDT2 Control/Status Register for Alternate Boot (AST2600) */ 129 #define R_FMC_WDT2_CTRL (0x64 / 4) 130 #define FMC_WDT2_CTRL_ALT_BOOT_MODE BIT(6) /* O: 2 chips 1: 1 chip */ 131 #define FMC_WDT2_CTRL_SINGLE_BOOT_MODE BIT(5) 132 #define FMC_WDT2_CTRL_BOOT_SOURCE BIT(4) /* O: primary 1: alternate */ 133 #define FMC_WDT2_CTRL_EN BIT(0) 134 135 /* DMA DRAM Side Address High Part (AST2700) */ 136 #define R_DMA_DRAM_ADDR_HIGH (0x7c / 4) 137 138 /* DMA Control/Status Register */ 139 #define R_DMA_CTRL (0x80 / 4) 140 #define DMA_CTRL_REQUEST (1 << 31) 141 #define DMA_CTRL_GRANT (1 << 30) 142 #define DMA_CTRL_DELAY_MASK 0xf 143 #define DMA_CTRL_DELAY_SHIFT 8 144 #define DMA_CTRL_FREQ_MASK 0xf 145 #define DMA_CTRL_FREQ_SHIFT 4 146 #define DMA_CTRL_CALIB (1 << 3) 147 #define DMA_CTRL_CKSUM (1 << 2) 148 #define DMA_CTRL_WRITE (1 << 1) 149 #define DMA_CTRL_ENABLE (1 << 0) 150 151 /* DMA Flash Side Address */ 152 #define R_DMA_FLASH_ADDR (0x84 / 4) 153 154 /* DMA DRAM Side Address */ 155 #define R_DMA_DRAM_ADDR (0x88 / 4) 156 157 /* DMA Length Register */ 158 #define R_DMA_LEN (0x8C / 4) 159 160 /* Checksum Calculation Result */ 161 #define R_DMA_CHECKSUM (0x90 / 4) 162 163 /* Read Timing Compensation Register */ 164 #define R_TIMINGS (0x94 / 4) 165 166 /* SPI controller registers and bits (AST2400) */ 167 #define R_SPI_CONF (0x00 / 4) 168 #define SPI_CONF_ENABLE_W0 0 169 #define R_SPI_CTRL0 (0x4 / 4) 170 #define R_SPI_MISC_CTRL (0x10 / 4) 171 #define R_SPI_TIMINGS (0x14 / 4) 172 173 #define ASPEED_SMC_R_SPI_MAX (0x20 / 4) 174 #define ASPEED_SMC_R_SMC_MAX (0x20 / 4) 175 176 /* 177 * DMA DRAM addresses should be 4 bytes aligned and the valid address 178 * range is 0x40000000 - 0x5FFFFFFF (AST2400) 179 * 0x80000000 - 0xBFFFFFFF (AST2500) 180 * 181 * DMA flash addresses should be 4 bytes aligned and the valid address 182 * range is 0x20000000 - 0x2FFFFFFF. 183 * 184 * DMA length is from 4 bytes to 32MB (AST2500) 185 * 0: 4 bytes 186 * 0x1FFFFFC: 32M bytes 187 * 188 * DMA length is from 1 byte to 32MB (AST2600, AST10x0 and AST2700) 189 * 0: 1 byte 190 * 0x1FFFFFF: 32M bytes 191 */ 192 #define DMA_DRAM_ADDR(asc, val) ((val) & (asc)->dma_dram_mask) 193 #define DMA_DRAM_ADDR_HIGH(val) ((val) & 0xf) 194 #define DMA_FLASH_ADDR(asc, val) ((val) & (asc)->dma_flash_mask) 195 #define DMA_LENGTH(val) ((val) & 0x01FFFFFF) 196 197 /* Flash opcodes. */ 198 #define SPI_OP_READ 0x03 /* Read data bytes (low frequency) */ 199 200 #define SNOOP_OFF 0xFF 201 #define SNOOP_START 0x0 202 203 /* 204 * Default segments mapping addresses and size for each peripheral per 205 * controller. These can be changed when board is initialized with the 206 * Segment Address Registers. 207 */ 208 static const AspeedSegments aspeed_2500_spi1_segments[]; 209 static const AspeedSegments aspeed_2500_spi2_segments[]; 210 211 #define ASPEED_SMC_FEATURE_DMA 0x1 212 #define ASPEED_SMC_FEATURE_DMA_GRANT 0x2 213 #define ASPEED_SMC_FEATURE_WDT_CONTROL 0x4 214 #define ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH 0x08 215 216 static inline bool aspeed_smc_has_dma(const AspeedSMCClass *asc) 217 { 218 return !!(asc->features & ASPEED_SMC_FEATURE_DMA); 219 } 220 221 static inline bool aspeed_smc_has_wdt_control(const AspeedSMCClass *asc) 222 { 223 return !!(asc->features & ASPEED_SMC_FEATURE_WDT_CONTROL); 224 } 225 226 static inline bool aspeed_smc_has_dma64(const AspeedSMCClass *asc) 227 { 228 return !!(asc->features & ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH); 229 } 230 231 #define aspeed_smc_error(fmt, ...) \ 232 qemu_log_mask(LOG_GUEST_ERROR, "%s: " fmt "\n", __func__, ## __VA_ARGS__) 233 234 static bool aspeed_smc_flash_overlap(const AspeedSMCState *s, 235 const AspeedSegments *new, 236 int cs) 237 { 238 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 239 AspeedSegments seg; 240 int i; 241 242 for (i = 0; i < asc->cs_num_max; i++) { 243 if (i == cs) { 244 continue; 245 } 246 247 asc->reg_to_segment(s, s->regs[R_SEG_ADDR0 + i], &seg); 248 249 if (new->addr + new->size > seg.addr && 250 new->addr < seg.addr + seg.size) { 251 aspeed_smc_error("new segment CS%d [ 0x%" 252 HWADDR_PRIx" - 0x%"HWADDR_PRIx" ] overlaps with " 253 "CS%d [ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]", 254 cs, new->addr, new->addr + new->size, 255 i, seg.addr, seg.addr + seg.size); 256 return true; 257 } 258 } 259 return false; 260 } 261 262 static void aspeed_smc_flash_set_segment_region(AspeedSMCState *s, int cs, 263 uint64_t regval) 264 { 265 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 266 AspeedSMCFlash *fl = &s->flashes[cs]; 267 AspeedSegments seg; 268 269 asc->reg_to_segment(s, regval, &seg); 270 271 memory_region_transaction_begin(); 272 memory_region_set_size(&fl->mmio, seg.size); 273 memory_region_set_address(&fl->mmio, seg.addr - asc->flash_window_base); 274 memory_region_set_enabled(&fl->mmio, !!seg.size); 275 memory_region_transaction_commit(); 276 277 if (asc->segment_addr_mask) { 278 regval &= asc->segment_addr_mask; 279 } 280 281 s->regs[R_SEG_ADDR0 + cs] = regval; 282 } 283 284 static void aspeed_smc_flash_set_segment(AspeedSMCState *s, int cs, 285 uint64_t new) 286 { 287 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 288 AspeedSegments seg; 289 290 asc->reg_to_segment(s, new, &seg); 291 292 trace_aspeed_smc_flash_set_segment(cs, new, seg.addr, seg.addr + seg.size); 293 294 /* The start address of CS0 is read-only */ 295 if (cs == 0 && seg.addr != asc->flash_window_base) { 296 aspeed_smc_error("Tried to change CS0 start address to 0x%" 297 HWADDR_PRIx, seg.addr); 298 seg.addr = asc->flash_window_base; 299 new = asc->segment_to_reg(s, &seg); 300 } 301 302 /* 303 * The end address of the AST2500 spi controllers is also 304 * read-only. 305 */ 306 if ((asc->segments == aspeed_2500_spi1_segments || 307 asc->segments == aspeed_2500_spi2_segments) && 308 cs == asc->cs_num_max && 309 seg.addr + seg.size != asc->segments[cs].addr + 310 asc->segments[cs].size) { 311 aspeed_smc_error("Tried to change CS%d end address to 0x%" 312 HWADDR_PRIx, cs, seg.addr + seg.size); 313 seg.size = asc->segments[cs].addr + asc->segments[cs].size - 314 seg.addr; 315 new = asc->segment_to_reg(s, &seg); 316 } 317 318 /* Keep the segment in the overall flash window */ 319 if (seg.size && 320 (seg.addr + seg.size <= asc->flash_window_base || 321 seg.addr > asc->flash_window_base + asc->flash_window_size)) { 322 aspeed_smc_error("new segment for CS%d is invalid : " 323 "[ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]", 324 cs, seg.addr, seg.addr + seg.size); 325 return; 326 } 327 328 /* Check start address vs. alignment */ 329 if (seg.size && !QEMU_IS_ALIGNED(seg.addr, seg.size)) { 330 aspeed_smc_error("new segment for CS%d is not " 331 "aligned : [ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]", 332 cs, seg.addr, seg.addr + seg.size); 333 } 334 335 /* And segments should not overlap (in the specs) */ 336 aspeed_smc_flash_overlap(s, &seg, cs); 337 338 /* All should be fine now to move the region */ 339 aspeed_smc_flash_set_segment_region(s, cs, new); 340 } 341 342 static uint64_t aspeed_smc_flash_default_read(void *opaque, hwaddr addr, 343 unsigned size) 344 { 345 aspeed_smc_error("To 0x%" HWADDR_PRIx " of size %u", addr, size); 346 return 0; 347 } 348 349 static void aspeed_smc_flash_default_write(void *opaque, hwaddr addr, 350 uint64_t data, unsigned size) 351 { 352 aspeed_smc_error("To 0x%" HWADDR_PRIx " of size %u: 0x%" PRIx64, 353 addr, size, data); 354 } 355 356 static const MemoryRegionOps aspeed_smc_flash_default_ops = { 357 .read = aspeed_smc_flash_default_read, 358 .write = aspeed_smc_flash_default_write, 359 .endianness = DEVICE_LITTLE_ENDIAN, 360 .valid = { 361 .min_access_size = 1, 362 .max_access_size = 4, 363 }, 364 }; 365 366 static inline int aspeed_smc_flash_mode(const AspeedSMCFlash *fl) 367 { 368 const AspeedSMCState *s = fl->controller; 369 370 return s->regs[s->r_ctrl0 + fl->cs] & CTRL_CMD_MODE_MASK; 371 } 372 373 static inline bool aspeed_smc_is_writable(const AspeedSMCFlash *fl) 374 { 375 const AspeedSMCState *s = fl->controller; 376 377 return s->regs[s->r_conf] & (1 << (s->conf_enable_w0 + fl->cs)); 378 } 379 380 static inline int aspeed_smc_flash_cmd(const AspeedSMCFlash *fl) 381 { 382 const AspeedSMCState *s = fl->controller; 383 int cmd = (s->regs[s->r_ctrl0 + fl->cs] >> CTRL_CMD_SHIFT) & CTRL_CMD_MASK; 384 385 /* 386 * In read mode, the default SPI command is READ (0x3). In other 387 * modes, the command should necessarily be defined 388 * 389 * TODO: add support for READ4 (0x13) on AST2600 390 */ 391 if (aspeed_smc_flash_mode(fl) == CTRL_READMODE) { 392 cmd = SPI_OP_READ; 393 } 394 395 if (!cmd) { 396 aspeed_smc_error("no command defined for mode %d", 397 aspeed_smc_flash_mode(fl)); 398 } 399 400 return cmd; 401 } 402 403 static inline int aspeed_smc_flash_addr_width(const AspeedSMCFlash *fl) 404 { 405 const AspeedSMCState *s = fl->controller; 406 AspeedSMCClass *asc = fl->asc; 407 408 if (asc->addr_width) { 409 return asc->addr_width(s); 410 } else { 411 return s->regs[s->r_ce_ctrl] & (1 << (CTRL_EXTENDED0 + fl->cs)) ? 4 : 3; 412 } 413 } 414 415 static void aspeed_smc_flash_do_select(AspeedSMCFlash *fl, bool unselect) 416 { 417 AspeedSMCState *s = fl->controller; 418 419 trace_aspeed_smc_flash_select(fl->cs, unselect ? "un" : ""); 420 421 qemu_set_irq(s->cs_lines[fl->cs], unselect); 422 } 423 424 static void aspeed_smc_flash_select(AspeedSMCFlash *fl) 425 { 426 aspeed_smc_flash_do_select(fl, false); 427 } 428 429 static void aspeed_smc_flash_unselect(AspeedSMCFlash *fl) 430 { 431 aspeed_smc_flash_do_select(fl, true); 432 } 433 434 static uint32_t aspeed_smc_check_segment_addr(const AspeedSMCFlash *fl, 435 uint32_t addr) 436 { 437 const AspeedSMCState *s = fl->controller; 438 AspeedSMCClass *asc = fl->asc; 439 AspeedSegments seg; 440 441 asc->reg_to_segment(s, s->regs[R_SEG_ADDR0 + fl->cs], &seg); 442 if ((addr % seg.size) != addr) { 443 aspeed_smc_error("invalid address 0x%08x for CS%d segment : " 444 "[ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]", 445 addr, fl->cs, seg.addr, seg.addr + seg.size); 446 addr %= seg.size; 447 } 448 449 return addr; 450 } 451 452 static int aspeed_smc_flash_dummies(const AspeedSMCFlash *fl) 453 { 454 const AspeedSMCState *s = fl->controller; 455 uint32_t r_ctrl0 = s->regs[s->r_ctrl0 + fl->cs]; 456 uint32_t dummy_high = (r_ctrl0 >> CTRL_DUMMY_HIGH_SHIFT) & 0x1; 457 uint32_t dummy_low = (r_ctrl0 >> CTRL_DUMMY_LOW_SHIFT) & 0x3; 458 uint32_t dummies = ((dummy_high << 2) | dummy_low) * 8; 459 460 if (r_ctrl0 & CTRL_IO_DUAL_ADDR_DATA) { 461 dummies /= 2; 462 } 463 464 return dummies; 465 } 466 467 static void aspeed_smc_flash_setup(AspeedSMCFlash *fl, uint32_t addr) 468 { 469 const AspeedSMCState *s = fl->controller; 470 uint8_t cmd = aspeed_smc_flash_cmd(fl); 471 int i = aspeed_smc_flash_addr_width(fl); 472 473 /* Flash access can not exceed CS segment */ 474 addr = aspeed_smc_check_segment_addr(fl, addr); 475 476 ssi_transfer(s->spi, cmd); 477 while (i--) { 478 if (aspeed_smc_addr_byte_enabled(s, i)) { 479 ssi_transfer(s->spi, (addr >> (i * 8)) & 0xff); 480 } 481 } 482 483 /* 484 * Use fake transfers to model dummy bytes. The value should 485 * be configured to some non-zero value in fast read mode and 486 * zero in read mode. But, as the HW allows inconsistent 487 * settings, let's check for fast read mode. 488 */ 489 if (aspeed_smc_flash_mode(fl) == CTRL_FREADMODE) { 490 for (i = 0; i < aspeed_smc_flash_dummies(fl); i++) { 491 ssi_transfer(fl->controller->spi, s->regs[R_DUMMY_DATA] & 0xff); 492 } 493 } 494 } 495 496 static uint64_t aspeed_smc_flash_read(void *opaque, hwaddr addr, unsigned size) 497 { 498 AspeedSMCFlash *fl = opaque; 499 AspeedSMCState *s = fl->controller; 500 uint64_t ret = 0; 501 int i; 502 503 switch (aspeed_smc_flash_mode(fl)) { 504 case CTRL_USERMODE: 505 for (i = 0; i < size; i++) { 506 ret |= (uint64_t) ssi_transfer(s->spi, 0x0) << (8 * i); 507 } 508 break; 509 case CTRL_READMODE: 510 case CTRL_FREADMODE: 511 aspeed_smc_flash_select(fl); 512 aspeed_smc_flash_setup(fl, addr); 513 514 for (i = 0; i < size; i++) { 515 ret |= (uint64_t) ssi_transfer(s->spi, 0x0) << (8 * i); 516 } 517 518 aspeed_smc_flash_unselect(fl); 519 break; 520 default: 521 aspeed_smc_error("invalid flash mode %d", aspeed_smc_flash_mode(fl)); 522 } 523 524 trace_aspeed_smc_flash_read(fl->cs, addr, size, ret, 525 aspeed_smc_flash_mode(fl)); 526 return ret; 527 } 528 529 /* 530 * TODO (clg@kaod.org): stolen from xilinx_spips.c. Should move to a 531 * common include header. 532 */ 533 typedef enum { 534 READ = 0x3, READ_4 = 0x13, 535 FAST_READ = 0xb, FAST_READ_4 = 0x0c, 536 DOR = 0x3b, DOR_4 = 0x3c, 537 QOR = 0x6b, QOR_4 = 0x6c, 538 DIOR = 0xbb, DIOR_4 = 0xbc, 539 QIOR = 0xeb, QIOR_4 = 0xec, 540 541 PP = 0x2, PP_4 = 0x12, 542 DPP = 0xa2, 543 QPP = 0x32, QPP_4 = 0x34, 544 } FlashCMD; 545 546 static int aspeed_smc_num_dummies(uint8_t command) 547 { 548 switch (command) { /* check for dummies */ 549 case READ: /* no dummy bytes/cycles */ 550 case PP: 551 case DPP: 552 case QPP: 553 case READ_4: 554 case PP_4: 555 case QPP_4: 556 return 0; 557 case FAST_READ: 558 case DOR: 559 case QOR: 560 case FAST_READ_4: 561 case DOR_4: 562 case QOR_4: 563 return 1; 564 case DIOR: 565 case DIOR_4: 566 return 2; 567 case QIOR: 568 case QIOR_4: 569 return 4; 570 default: 571 return -1; 572 } 573 } 574 575 static bool aspeed_smc_do_snoop(AspeedSMCFlash *fl, uint64_t data, 576 unsigned size) 577 { 578 AspeedSMCState *s = fl->controller; 579 uint8_t addr_width = aspeed_smc_flash_addr_width(fl); 580 581 trace_aspeed_smc_do_snoop(fl->cs, s->snoop_index, s->snoop_dummies, 582 (uint8_t) data & 0xff); 583 584 if (s->snoop_index == SNOOP_OFF) { 585 return false; /* Do nothing */ 586 587 } else if (s->snoop_index == SNOOP_START) { 588 uint8_t cmd = data & 0xff; 589 int ndummies = aspeed_smc_num_dummies(cmd); 590 591 /* 592 * No dummy cycles are expected with the current command. Turn 593 * off snooping and let the transfer proceed normally. 594 */ 595 if (ndummies <= 0) { 596 s->snoop_index = SNOOP_OFF; 597 return false; 598 } 599 600 s->snoop_dummies = ndummies * 8; 601 602 } else if (s->snoop_index >= addr_width + 1) { 603 604 /* The SPI transfer has reached the dummy cycles sequence */ 605 for (; s->snoop_dummies; s->snoop_dummies--) { 606 ssi_transfer(s->spi, s->regs[R_DUMMY_DATA] & 0xff); 607 } 608 609 /* If no more dummy cycles are expected, turn off snooping */ 610 if (!s->snoop_dummies) { 611 s->snoop_index = SNOOP_OFF; 612 } else { 613 s->snoop_index += size; 614 } 615 616 /* 617 * Dummy cycles have been faked already. Ignore the current 618 * SPI transfer 619 */ 620 return true; 621 } 622 623 s->snoop_index += size; 624 return false; 625 } 626 627 static void aspeed_smc_flash_write(void *opaque, hwaddr addr, uint64_t data, 628 unsigned size) 629 { 630 AspeedSMCFlash *fl = opaque; 631 AspeedSMCState *s = fl->controller; 632 int i; 633 634 trace_aspeed_smc_flash_write(fl->cs, addr, size, data, 635 aspeed_smc_flash_mode(fl)); 636 637 if (!aspeed_smc_is_writable(fl)) { 638 aspeed_smc_error("flash is not writable at 0x%" HWADDR_PRIx, addr); 639 return; 640 } 641 642 switch (aspeed_smc_flash_mode(fl)) { 643 case CTRL_USERMODE: 644 if (aspeed_smc_do_snoop(fl, data, size)) { 645 break; 646 } 647 648 for (i = 0; i < size; i++) { 649 ssi_transfer(s->spi, (data >> (8 * i)) & 0xff); 650 } 651 break; 652 case CTRL_WRITEMODE: 653 aspeed_smc_flash_select(fl); 654 aspeed_smc_flash_setup(fl, addr); 655 656 for (i = 0; i < size; i++) { 657 ssi_transfer(s->spi, (data >> (8 * i)) & 0xff); 658 } 659 660 aspeed_smc_flash_unselect(fl); 661 break; 662 default: 663 aspeed_smc_error("invalid flash mode %d", aspeed_smc_flash_mode(fl)); 664 } 665 } 666 667 static const MemoryRegionOps aspeed_smc_flash_ops = { 668 .read = aspeed_smc_flash_read, 669 .write = aspeed_smc_flash_write, 670 .endianness = DEVICE_LITTLE_ENDIAN, 671 .valid = { 672 .min_access_size = 1, 673 .max_access_size = 4, 674 }, 675 }; 676 677 static void aspeed_smc_flash_update_ctrl(AspeedSMCFlash *fl, uint32_t value) 678 { 679 AspeedSMCState *s = fl->controller; 680 bool unselect; 681 682 /* User mode selects the CS, other modes unselect */ 683 unselect = (value & CTRL_CMD_MODE_MASK) != CTRL_USERMODE; 684 685 /* A change of CTRL_CE_STOP_ACTIVE from 0 to 1, unselects the CS */ 686 if (!(s->regs[s->r_ctrl0 + fl->cs] & CTRL_CE_STOP_ACTIVE) && 687 value & CTRL_CE_STOP_ACTIVE) { 688 unselect = true; 689 } 690 691 s->regs[s->r_ctrl0 + fl->cs] = value; 692 693 s->snoop_index = unselect ? SNOOP_OFF : SNOOP_START; 694 695 aspeed_smc_flash_do_select(fl, unselect); 696 } 697 698 static void aspeed_smc_reset(DeviceState *d) 699 { 700 AspeedSMCState *s = ASPEED_SMC(d); 701 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 702 int i; 703 704 if (asc->resets) { 705 memcpy(s->regs, asc->resets, sizeof s->regs); 706 } else { 707 memset(s->regs, 0, sizeof s->regs); 708 } 709 710 for (i = 0; i < asc->cs_num_max; i++) { 711 DeviceState *dev = ssi_get_cs(s->spi, i); 712 if (dev) { 713 Object *o = OBJECT(dev); 714 715 if (!object_dynamic_cast(o, TYPE_M25P80)) { 716 warn_report("Aspeed SMC %s.%d : Invalid %s device type", 717 BUS(s->spi)->name, i, object_get_typename(o)); 718 continue; 719 } 720 721 qemu_irq cs_line = qdev_get_gpio_in_named(dev, SSI_GPIO_CS, 0); 722 qdev_connect_gpio_out_named(DEVICE(s), "cs", i, cs_line); 723 } 724 } 725 726 /* Unselect all peripherals */ 727 for (i = 0; i < asc->cs_num_max; ++i) { 728 s->regs[s->r_ctrl0 + i] |= CTRL_CE_STOP_ACTIVE; 729 qemu_set_irq(s->cs_lines[i], true); 730 } 731 732 /* setup the default segment register values and regions for all */ 733 for (i = 0; i < asc->cs_num_max; ++i) { 734 aspeed_smc_flash_set_segment_region(s, i, 735 asc->segment_to_reg(s, &asc->segments[i])); 736 } 737 738 s->snoop_index = SNOOP_OFF; 739 s->snoop_dummies = 0; 740 } 741 742 static uint64_t aspeed_smc_read(void *opaque, hwaddr addr, unsigned int size) 743 { 744 AspeedSMCState *s = ASPEED_SMC(opaque); 745 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(opaque); 746 747 addr >>= 2; 748 749 if (addr == s->r_conf || 750 (addr >= s->r_timings && 751 addr < s->r_timings + asc->nregs_timings) || 752 addr == s->r_ce_ctrl || 753 addr == R_CE_CMD_CTRL || 754 addr == R_INTR_CTRL || 755 addr == R_DUMMY_DATA || 756 (aspeed_smc_has_wdt_control(asc) && addr == R_FMC_WDT2_CTRL) || 757 (aspeed_smc_has_dma(asc) && addr == R_DMA_CTRL) || 758 (aspeed_smc_has_dma(asc) && addr == R_DMA_FLASH_ADDR) || 759 (aspeed_smc_has_dma(asc) && addr == R_DMA_DRAM_ADDR) || 760 (aspeed_smc_has_dma(asc) && aspeed_smc_has_dma64(asc) && 761 addr == R_DMA_DRAM_ADDR_HIGH) || 762 (aspeed_smc_has_dma(asc) && addr == R_DMA_LEN) || 763 (aspeed_smc_has_dma(asc) && addr == R_DMA_CHECKSUM) || 764 (addr >= R_SEG_ADDR0 && 765 addr < R_SEG_ADDR0 + asc->cs_num_max) || 766 (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + asc->cs_num_max)) { 767 768 trace_aspeed_smc_read(addr << 2, size, s->regs[addr]); 769 770 return s->regs[addr]; 771 } else { 772 qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n", 773 __func__, addr); 774 return -1; 775 } 776 } 777 778 static uint8_t aspeed_smc_hclk_divisor(uint8_t hclk_mask) 779 { 780 /* HCLK/1 .. HCLK/16 */ 781 const uint8_t hclk_divisors[] = { 782 15, 7, 14, 6, 13, 5, 12, 4, 11, 3, 10, 2, 9, 1, 8, 0 783 }; 784 int i; 785 786 for (i = 0; i < ARRAY_SIZE(hclk_divisors); i++) { 787 if (hclk_mask == hclk_divisors[i]) { 788 return i + 1; 789 } 790 } 791 792 g_assert_not_reached(); 793 } 794 795 /* 796 * When doing calibration, the SPI clock rate in the CE0 Control 797 * Register and the read delay cycles in the Read Timing Compensation 798 * Register are set using bit[11:4] of the DMA Control Register. 799 */ 800 static void aspeed_smc_dma_calibration(AspeedSMCState *s) 801 { 802 uint8_t delay = 803 (s->regs[R_DMA_CTRL] >> DMA_CTRL_DELAY_SHIFT) & DMA_CTRL_DELAY_MASK; 804 uint8_t hclk_mask = 805 (s->regs[R_DMA_CTRL] >> DMA_CTRL_FREQ_SHIFT) & DMA_CTRL_FREQ_MASK; 806 uint8_t hclk_div = aspeed_smc_hclk_divisor(hclk_mask); 807 uint32_t hclk_shift = (hclk_div - 1) << 2; 808 uint8_t cs; 809 810 /* 811 * The Read Timing Compensation Register values apply to all CS on 812 * the SPI bus and only HCLK/1 - HCLK/5 can have tunable delays 813 */ 814 if (hclk_div && hclk_div < 6) { 815 s->regs[s->r_timings] &= ~(0xf << hclk_shift); 816 s->regs[s->r_timings] |= delay << hclk_shift; 817 } 818 819 /* 820 * TODO: compute the CS from the DMA address and the segment 821 * registers. This is not really a problem for now because the 822 * Timing Register values apply to all CS and software uses CS0 to 823 * do calibration. 824 */ 825 cs = 0; 826 s->regs[s->r_ctrl0 + cs] &= 827 ~(CE_CTRL_CLOCK_FREQ_MASK << CE_CTRL_CLOCK_FREQ_SHIFT); 828 s->regs[s->r_ctrl0 + cs] |= CE_CTRL_CLOCK_FREQ(hclk_div); 829 } 830 831 /* 832 * Emulate read errors in the DMA Checksum Register for high 833 * frequencies and optimistic settings of the Read Timing Compensation 834 * Register. This will help in tuning the SPI timing calibration 835 * algorithm. 836 */ 837 static bool aspeed_smc_inject_read_failure(AspeedSMCState *s) 838 { 839 uint8_t delay = 840 (s->regs[R_DMA_CTRL] >> DMA_CTRL_DELAY_SHIFT) & DMA_CTRL_DELAY_MASK; 841 uint8_t hclk_mask = 842 (s->regs[R_DMA_CTRL] >> DMA_CTRL_FREQ_SHIFT) & DMA_CTRL_FREQ_MASK; 843 844 /* 845 * Typical values of a palmetto-bmc machine. 846 */ 847 switch (aspeed_smc_hclk_divisor(hclk_mask)) { 848 case 4 ... 16: 849 return false; 850 case 3: /* at least one HCLK cycle delay */ 851 return (delay & 0x7) < 1; 852 case 2: /* at least two HCLK cycle delay */ 853 return (delay & 0x7) < 2; 854 case 1: /* (> 100MHz) is above the max freq of the controller */ 855 return true; 856 default: 857 g_assert_not_reached(); 858 } 859 } 860 861 static uint64_t aspeed_smc_dma_dram_addr(AspeedSMCState *s) 862 { 863 return s->regs[R_DMA_DRAM_ADDR] | 864 ((uint64_t) s->regs[R_DMA_DRAM_ADDR_HIGH] << 32); 865 } 866 867 static uint32_t aspeed_smc_dma_len(AspeedSMCState *s) 868 { 869 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 870 871 return QEMU_ALIGN_UP(s->regs[R_DMA_LEN] + asc->dma_start_length, 4); 872 } 873 874 /* 875 * Accumulate the result of the reads to provide a checksum that will 876 * be used to validate the read timing settings. 877 */ 878 static void aspeed_smc_dma_checksum(AspeedSMCState *s) 879 { 880 MemTxResult result; 881 uint32_t dma_len; 882 uint32_t data; 883 884 if (s->regs[R_DMA_CTRL] & DMA_CTRL_WRITE) { 885 aspeed_smc_error("invalid direction for DMA checksum"); 886 return; 887 } 888 889 if (s->regs[R_DMA_CTRL] & DMA_CTRL_CALIB) { 890 aspeed_smc_dma_calibration(s); 891 } 892 893 dma_len = aspeed_smc_dma_len(s); 894 895 while (dma_len) { 896 data = address_space_ldl_le(&s->flash_as, s->regs[R_DMA_FLASH_ADDR], 897 MEMTXATTRS_UNSPECIFIED, &result); 898 if (result != MEMTX_OK) { 899 aspeed_smc_error("Flash read failed @%08x", 900 s->regs[R_DMA_FLASH_ADDR]); 901 return; 902 } 903 trace_aspeed_smc_dma_checksum(s->regs[R_DMA_FLASH_ADDR], data); 904 905 /* 906 * When the DMA is on-going, the DMA registers are updated 907 * with the current working addresses and length. 908 */ 909 s->regs[R_DMA_CHECKSUM] += data; 910 s->regs[R_DMA_FLASH_ADDR] += 4; 911 dma_len -= 4; 912 s->regs[R_DMA_LEN] = dma_len; 913 } 914 915 if (s->inject_failure && aspeed_smc_inject_read_failure(s)) { 916 s->regs[R_DMA_CHECKSUM] = 0xbadc0de; 917 } 918 919 } 920 921 static void aspeed_smc_dma_rw(AspeedSMCState *s) 922 { 923 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 924 uint64_t dma_dram_offset; 925 uint64_t dma_dram_addr; 926 MemTxResult result; 927 uint32_t dma_len; 928 uint32_t data; 929 930 dma_len = aspeed_smc_dma_len(s); 931 dma_dram_addr = aspeed_smc_dma_dram_addr(s); 932 933 if (aspeed_smc_has_dma64(asc)) { 934 dma_dram_offset = dma_dram_addr - s->dram_base; 935 } else { 936 dma_dram_offset = dma_dram_addr; 937 } 938 939 trace_aspeed_smc_dma_rw(s->regs[R_DMA_CTRL] & DMA_CTRL_WRITE ? 940 "write" : "read", 941 s->regs[R_DMA_FLASH_ADDR], 942 dma_dram_offset, 943 dma_len); 944 while (dma_len) { 945 if (s->regs[R_DMA_CTRL] & DMA_CTRL_WRITE) { 946 data = address_space_ldl_le(&s->dram_as, dma_dram_offset, 947 MEMTXATTRS_UNSPECIFIED, &result); 948 if (result != MEMTX_OK) { 949 aspeed_smc_error("DRAM read failed @%" PRIx64, 950 dma_dram_offset); 951 return; 952 } 953 954 address_space_stl_le(&s->flash_as, s->regs[R_DMA_FLASH_ADDR], 955 data, MEMTXATTRS_UNSPECIFIED, &result); 956 if (result != MEMTX_OK) { 957 aspeed_smc_error("Flash write failed @%08x", 958 s->regs[R_DMA_FLASH_ADDR]); 959 return; 960 } 961 } else { 962 data = address_space_ldl_le(&s->flash_as, s->regs[R_DMA_FLASH_ADDR], 963 MEMTXATTRS_UNSPECIFIED, &result); 964 if (result != MEMTX_OK) { 965 aspeed_smc_error("Flash read failed @%08x", 966 s->regs[R_DMA_FLASH_ADDR]); 967 return; 968 } 969 970 address_space_stl_le(&s->dram_as, dma_dram_offset, 971 data, MEMTXATTRS_UNSPECIFIED, &result); 972 if (result != MEMTX_OK) { 973 aspeed_smc_error("DRAM write failed @%" PRIx64, 974 dma_dram_offset); 975 return; 976 } 977 } 978 979 /* 980 * When the DMA is on-going, the DMA registers are updated 981 * with the current working addresses and length. 982 */ 983 dma_dram_offset += 4; 984 dma_dram_addr += 4; 985 986 s->regs[R_DMA_DRAM_ADDR_HIGH] = dma_dram_addr >> 32; 987 s->regs[R_DMA_DRAM_ADDR] = dma_dram_addr & 0xffffffff; 988 s->regs[R_DMA_FLASH_ADDR] += 4; 989 dma_len -= 4; 990 s->regs[R_DMA_LEN] = dma_len; 991 s->regs[R_DMA_CHECKSUM] += data; 992 } 993 } 994 995 static void aspeed_smc_dma_stop(AspeedSMCState *s) 996 { 997 /* 998 * When the DMA is disabled, INTR_CTRL_DMA_STATUS=0 means the 999 * engine is idle 1000 */ 1001 s->regs[R_INTR_CTRL] &= ~INTR_CTRL_DMA_STATUS; 1002 s->regs[R_DMA_CHECKSUM] = 0; 1003 1004 /* 1005 * Lower the DMA irq in any case. The IRQ control register could 1006 * have been cleared before disabling the DMA. 1007 */ 1008 qemu_irq_lower(s->irq); 1009 } 1010 1011 /* 1012 * When INTR_CTRL_DMA_STATUS=1, the DMA has completed and a new DMA 1013 * can start even if the result of the previous was not collected. 1014 */ 1015 static bool aspeed_smc_dma_in_progress(AspeedSMCState *s) 1016 { 1017 return s->regs[R_DMA_CTRL] & DMA_CTRL_ENABLE && 1018 !(s->regs[R_INTR_CTRL] & INTR_CTRL_DMA_STATUS); 1019 } 1020 1021 static void aspeed_smc_dma_done(AspeedSMCState *s) 1022 { 1023 s->regs[R_INTR_CTRL] |= INTR_CTRL_DMA_STATUS; 1024 if (s->regs[R_INTR_CTRL] & INTR_CTRL_DMA_EN) { 1025 qemu_irq_raise(s->irq); 1026 } 1027 } 1028 1029 static void aspeed_smc_dma_ctrl(AspeedSMCState *s, uint32_t dma_ctrl) 1030 { 1031 if (!(dma_ctrl & DMA_CTRL_ENABLE)) { 1032 s->regs[R_DMA_CTRL] = dma_ctrl; 1033 1034 aspeed_smc_dma_stop(s); 1035 return; 1036 } 1037 1038 if (aspeed_smc_dma_in_progress(s)) { 1039 aspeed_smc_error("DMA in progress !"); 1040 return; 1041 } 1042 1043 s->regs[R_DMA_CTRL] = dma_ctrl; 1044 1045 if (s->regs[R_DMA_CTRL] & DMA_CTRL_CKSUM) { 1046 aspeed_smc_dma_checksum(s); 1047 } else { 1048 aspeed_smc_dma_rw(s); 1049 } 1050 1051 aspeed_smc_dma_done(s); 1052 } 1053 1054 static inline bool aspeed_smc_dma_granted(AspeedSMCState *s) 1055 { 1056 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 1057 1058 if (!(asc->features & ASPEED_SMC_FEATURE_DMA_GRANT)) { 1059 return true; 1060 } 1061 1062 if (!(s->regs[R_DMA_CTRL] & DMA_CTRL_GRANT)) { 1063 aspeed_smc_error("DMA not granted"); 1064 return false; 1065 } 1066 1067 return true; 1068 } 1069 1070 static void aspeed_2600_smc_dma_ctrl(AspeedSMCState *s, uint32_t dma_ctrl) 1071 { 1072 /* Preserve DMA bits */ 1073 dma_ctrl |= s->regs[R_DMA_CTRL] & (DMA_CTRL_REQUEST | DMA_CTRL_GRANT); 1074 1075 if (dma_ctrl == 0xAEED0000) { 1076 /* automatically grant request */ 1077 s->regs[R_DMA_CTRL] |= (DMA_CTRL_REQUEST | DMA_CTRL_GRANT); 1078 return; 1079 } 1080 1081 /* clear request */ 1082 if (dma_ctrl == 0xDEEA0000) { 1083 s->regs[R_DMA_CTRL] &= ~(DMA_CTRL_REQUEST | DMA_CTRL_GRANT); 1084 return; 1085 } 1086 1087 if (!aspeed_smc_dma_granted(s)) { 1088 aspeed_smc_error("DMA not granted"); 1089 return; 1090 } 1091 1092 aspeed_smc_dma_ctrl(s, dma_ctrl); 1093 s->regs[R_DMA_CTRL] &= ~(DMA_CTRL_REQUEST | DMA_CTRL_GRANT); 1094 } 1095 1096 static void aspeed_smc_write(void *opaque, hwaddr addr, uint64_t data, 1097 unsigned int size) 1098 { 1099 AspeedSMCState *s = ASPEED_SMC(opaque); 1100 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 1101 uint32_t value = data; 1102 1103 trace_aspeed_smc_write(addr, size, data); 1104 1105 addr >>= 2; 1106 1107 if (addr == s->r_conf || 1108 (addr >= s->r_timings && 1109 addr < s->r_timings + asc->nregs_timings) || 1110 addr == s->r_ce_ctrl) { 1111 s->regs[addr] = value; 1112 } else if (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + asc->cs_num_max) { 1113 int cs = addr - s->r_ctrl0; 1114 aspeed_smc_flash_update_ctrl(&s->flashes[cs], value); 1115 } else if (addr >= R_SEG_ADDR0 && 1116 addr < R_SEG_ADDR0 + asc->cs_num_max) { 1117 int cs = addr - R_SEG_ADDR0; 1118 1119 if (value != s->regs[R_SEG_ADDR0 + cs]) { 1120 aspeed_smc_flash_set_segment(s, cs, value); 1121 } 1122 } else if (addr == R_CE_CMD_CTRL) { 1123 s->regs[addr] = value & 0xff; 1124 } else if (addr == R_DUMMY_DATA) { 1125 s->regs[addr] = value & 0xff; 1126 } else if (aspeed_smc_has_wdt_control(asc) && addr == R_FMC_WDT2_CTRL) { 1127 s->regs[addr] = value & FMC_WDT2_CTRL_EN; 1128 } else if (addr == R_INTR_CTRL) { 1129 s->regs[addr] = value; 1130 } else if (aspeed_smc_has_dma(asc) && addr == R_DMA_CTRL) { 1131 asc->dma_ctrl(s, value); 1132 } else if (aspeed_smc_has_dma(asc) && addr == R_DMA_DRAM_ADDR && 1133 aspeed_smc_dma_granted(s)) { 1134 s->regs[addr] = DMA_DRAM_ADDR(asc, value); 1135 } else if (aspeed_smc_has_dma(asc) && addr == R_DMA_FLASH_ADDR && 1136 aspeed_smc_dma_granted(s)) { 1137 s->regs[addr] = DMA_FLASH_ADDR(asc, value); 1138 } else if (aspeed_smc_has_dma(asc) && addr == R_DMA_LEN && 1139 aspeed_smc_dma_granted(s)) { 1140 s->regs[addr] = DMA_LENGTH(value); 1141 } else if (aspeed_smc_has_dma(asc) && aspeed_smc_has_dma64(asc) && 1142 addr == R_DMA_DRAM_ADDR_HIGH) { 1143 s->regs[addr] = DMA_DRAM_ADDR_HIGH(value); 1144 } else { 1145 qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n", 1146 __func__, addr); 1147 return; 1148 } 1149 } 1150 1151 static const MemoryRegionOps aspeed_smc_ops = { 1152 .read = aspeed_smc_read, 1153 .write = aspeed_smc_write, 1154 .endianness = DEVICE_LITTLE_ENDIAN, 1155 }; 1156 1157 static void aspeed_smc_instance_init(Object *obj) 1158 { 1159 AspeedSMCState *s = ASPEED_SMC(obj); 1160 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 1161 int i; 1162 1163 for (i = 0; i < asc->cs_num_max; i++) { 1164 object_initialize_child(obj, "flash[*]", &s->flashes[i], 1165 TYPE_ASPEED_SMC_FLASH); 1166 } 1167 } 1168 1169 /* 1170 * Initialize the custom address spaces for DMAs 1171 */ 1172 static void aspeed_smc_dma_setup(AspeedSMCState *s, Error **errp) 1173 { 1174 if (!s->dram_mr) { 1175 error_setg(errp, TYPE_ASPEED_SMC ": 'dram' link not set"); 1176 return; 1177 } 1178 1179 address_space_init(&s->flash_as, &s->mmio_flash, 1180 TYPE_ASPEED_SMC ".dma-flash"); 1181 address_space_init(&s->dram_as, s->dram_mr, 1182 TYPE_ASPEED_SMC ".dma-dram"); 1183 } 1184 1185 static void aspeed_smc_realize(DeviceState *dev, Error **errp) 1186 { 1187 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 1188 AspeedSMCState *s = ASPEED_SMC(dev); 1189 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 1190 int i; 1191 hwaddr offset = 0; 1192 1193 /* keep a copy under AspeedSMCState to speed up accesses */ 1194 s->r_conf = asc->r_conf; 1195 s->r_ce_ctrl = asc->r_ce_ctrl; 1196 s->r_ctrl0 = asc->r_ctrl0; 1197 s->r_timings = asc->r_timings; 1198 s->conf_enable_w0 = asc->conf_enable_w0; 1199 1200 /* DMA irq. Keep it first for the initialization in the SoC */ 1201 sysbus_init_irq(sbd, &s->irq); 1202 1203 s->spi = ssi_create_bus(dev, NULL); 1204 1205 /* Setup cs_lines for peripherals */ 1206 s->cs_lines = g_new0(qemu_irq, asc->cs_num_max); 1207 qdev_init_gpio_out_named(DEVICE(s), s->cs_lines, "cs", asc->cs_num_max); 1208 1209 /* The memory region for the controller registers */ 1210 memory_region_init_io(&s->mmio, OBJECT(s), &aspeed_smc_ops, s, 1211 TYPE_ASPEED_SMC, asc->nregs * 4); 1212 sysbus_init_mmio(sbd, &s->mmio); 1213 1214 /* 1215 * The container memory region representing the address space 1216 * window in which the flash modules are mapped. The size and 1217 * address depends on the SoC model and controller type. 1218 */ 1219 memory_region_init(&s->mmio_flash_container, OBJECT(s), 1220 TYPE_ASPEED_SMC ".container", 1221 asc->flash_window_size); 1222 sysbus_init_mmio(sbd, &s->mmio_flash_container); 1223 1224 memory_region_init_io(&s->mmio_flash, OBJECT(s), 1225 &aspeed_smc_flash_default_ops, s, 1226 TYPE_ASPEED_SMC ".flash", 1227 asc->flash_window_size); 1228 memory_region_add_subregion(&s->mmio_flash_container, 0x0, 1229 &s->mmio_flash); 1230 1231 /* 1232 * Let's create a sub memory region for each possible peripheral. All 1233 * have a configurable memory segment in the overall flash mapping 1234 * window of the controller but, there is not necessarily a flash 1235 * module behind to handle the memory accesses. This depends on 1236 * the board configuration. 1237 */ 1238 for (i = 0; i < asc->cs_num_max; ++i) { 1239 AspeedSMCFlash *fl = &s->flashes[i]; 1240 1241 if (!object_property_set_link(OBJECT(fl), "controller", OBJECT(s), 1242 errp)) { 1243 return; 1244 } 1245 if (!object_property_set_uint(OBJECT(fl), "cs", i, errp)) { 1246 return; 1247 } 1248 if (!sysbus_realize(SYS_BUS_DEVICE(fl), errp)) { 1249 return; 1250 } 1251 1252 memory_region_add_subregion(&s->mmio_flash, offset, &fl->mmio); 1253 offset += asc->segments[i].size; 1254 } 1255 1256 /* DMA support */ 1257 if (aspeed_smc_has_dma(asc)) { 1258 aspeed_smc_dma_setup(s, errp); 1259 } 1260 } 1261 1262 static const VMStateDescription vmstate_aspeed_smc = { 1263 .name = "aspeed.smc", 1264 .version_id = 2, 1265 .minimum_version_id = 2, 1266 .fields = (const VMStateField[]) { 1267 VMSTATE_UINT32_ARRAY(regs, AspeedSMCState, ASPEED_SMC_R_MAX), 1268 VMSTATE_UINT8(snoop_index, AspeedSMCState), 1269 VMSTATE_UINT8(snoop_dummies, AspeedSMCState), 1270 VMSTATE_END_OF_LIST() 1271 } 1272 }; 1273 1274 static Property aspeed_smc_properties[] = { 1275 DEFINE_PROP_BOOL("inject-failure", AspeedSMCState, inject_failure, false), 1276 DEFINE_PROP_UINT64("dram-base", AspeedSMCState, dram_base, 0), 1277 DEFINE_PROP_LINK("dram", AspeedSMCState, dram_mr, 1278 TYPE_MEMORY_REGION, MemoryRegion *), 1279 DEFINE_PROP_END_OF_LIST(), 1280 }; 1281 1282 static void aspeed_smc_class_init(ObjectClass *klass, void *data) 1283 { 1284 DeviceClass *dc = DEVICE_CLASS(klass); 1285 1286 dc->realize = aspeed_smc_realize; 1287 device_class_set_legacy_reset(dc, aspeed_smc_reset); 1288 device_class_set_props(dc, aspeed_smc_properties); 1289 dc->vmsd = &vmstate_aspeed_smc; 1290 } 1291 1292 static const TypeInfo aspeed_smc_info = { 1293 .name = TYPE_ASPEED_SMC, 1294 .parent = TYPE_SYS_BUS_DEVICE, 1295 .instance_init = aspeed_smc_instance_init, 1296 .instance_size = sizeof(AspeedSMCState), 1297 .class_size = sizeof(AspeedSMCClass), 1298 .class_init = aspeed_smc_class_init, 1299 .abstract = true, 1300 }; 1301 1302 static void aspeed_smc_flash_realize(DeviceState *dev, Error **errp) 1303 { 1304 AspeedSMCFlash *s = ASPEED_SMC_FLASH(dev); 1305 g_autofree char *name = g_strdup_printf(TYPE_ASPEED_SMC_FLASH ".%d", s->cs); 1306 1307 if (!s->controller) { 1308 error_setg(errp, TYPE_ASPEED_SMC_FLASH ": 'controller' link not set"); 1309 return; 1310 } 1311 1312 s->asc = ASPEED_SMC_GET_CLASS(s->controller); 1313 1314 /* 1315 * Use the default segment value to size the memory region. This 1316 * can be changed by FW at runtime. 1317 */ 1318 memory_region_init_io(&s->mmio, OBJECT(s), s->asc->reg_ops, 1319 s, name, s->asc->segments[s->cs].size); 1320 sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio); 1321 } 1322 1323 static Property aspeed_smc_flash_properties[] = { 1324 DEFINE_PROP_UINT8("cs", AspeedSMCFlash, cs, 0), 1325 DEFINE_PROP_LINK("controller", AspeedSMCFlash, controller, TYPE_ASPEED_SMC, 1326 AspeedSMCState *), 1327 DEFINE_PROP_END_OF_LIST(), 1328 }; 1329 1330 static void aspeed_smc_flash_class_init(ObjectClass *klass, void *data) 1331 { 1332 DeviceClass *dc = DEVICE_CLASS(klass); 1333 1334 dc->desc = "Aspeed SMC Flash device region"; 1335 dc->realize = aspeed_smc_flash_realize; 1336 device_class_set_props(dc, aspeed_smc_flash_properties); 1337 } 1338 1339 static const TypeInfo aspeed_smc_flash_info = { 1340 .name = TYPE_ASPEED_SMC_FLASH, 1341 .parent = TYPE_SYS_BUS_DEVICE, 1342 .instance_size = sizeof(AspeedSMCFlash), 1343 .class_init = aspeed_smc_flash_class_init, 1344 }; 1345 1346 /* 1347 * The Segment Registers of the AST2400 and AST2500 have a 8MB 1348 * unit. The address range of a flash SPI peripheral is encoded with 1349 * absolute addresses which should be part of the overall controller 1350 * window. 1351 */ 1352 static uint32_t aspeed_smc_segment_to_reg(const AspeedSMCState *s, 1353 const AspeedSegments *seg) 1354 { 1355 uint32_t reg = 0; 1356 reg |= ((seg->addr >> 23) & SEG_START_MASK) << SEG_START_SHIFT; 1357 reg |= (((seg->addr + seg->size) >> 23) & SEG_END_MASK) << SEG_END_SHIFT; 1358 return reg; 1359 } 1360 1361 static void aspeed_smc_reg_to_segment(const AspeedSMCState *s, 1362 uint32_t reg, AspeedSegments *seg) 1363 { 1364 seg->addr = ((reg >> SEG_START_SHIFT) & SEG_START_MASK) << 23; 1365 seg->size = (((reg >> SEG_END_SHIFT) & SEG_END_MASK) << 23) - seg->addr; 1366 } 1367 1368 static const AspeedSegments aspeed_2400_smc_segments[] = { 1369 { 0x10000000, 32 * MiB }, 1370 }; 1371 1372 static void aspeed_2400_smc_class_init(ObjectClass *klass, void *data) 1373 { 1374 DeviceClass *dc = DEVICE_CLASS(klass); 1375 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1376 1377 dc->desc = "Aspeed 2400 SMC Controller"; 1378 asc->r_conf = R_CONF; 1379 asc->r_ce_ctrl = R_CE_CTRL; 1380 asc->r_ctrl0 = R_CTRL0; 1381 asc->r_timings = R_TIMINGS; 1382 asc->nregs_timings = 1; 1383 asc->conf_enable_w0 = CONF_ENABLE_W0; 1384 asc->cs_num_max = 1; 1385 asc->segments = aspeed_2400_smc_segments; 1386 asc->flash_window_base = 0x10000000; 1387 asc->flash_window_size = 0x6000000; 1388 asc->features = 0x0; 1389 asc->nregs = ASPEED_SMC_R_SMC_MAX; 1390 asc->segment_to_reg = aspeed_smc_segment_to_reg; 1391 asc->reg_to_segment = aspeed_smc_reg_to_segment; 1392 asc->dma_ctrl = aspeed_smc_dma_ctrl; 1393 asc->reg_ops = &aspeed_smc_flash_ops; 1394 } 1395 1396 static const TypeInfo aspeed_2400_smc_info = { 1397 .name = "aspeed.smc-ast2400", 1398 .parent = TYPE_ASPEED_SMC, 1399 .class_init = aspeed_2400_smc_class_init, 1400 }; 1401 1402 static const uint32_t aspeed_2400_fmc_resets[ASPEED_SMC_R_MAX] = { 1403 /* 1404 * CE0 and CE1 types are HW strapped in SCU70. Do it here to 1405 * simplify the model. 1406 */ 1407 [R_CONF] = CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0, 1408 }; 1409 1410 static const AspeedSegments aspeed_2400_fmc_segments[] = { 1411 { 0x20000000, 64 * MiB }, /* start address is readonly */ 1412 { 0x24000000, 32 * MiB }, 1413 { 0x26000000, 32 * MiB }, 1414 { 0x28000000, 32 * MiB }, 1415 { 0x2A000000, 32 * MiB } 1416 }; 1417 1418 static void aspeed_2400_fmc_class_init(ObjectClass *klass, void *data) 1419 { 1420 DeviceClass *dc = DEVICE_CLASS(klass); 1421 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1422 1423 dc->desc = "Aspeed 2400 FMC Controller"; 1424 asc->r_conf = R_CONF; 1425 asc->r_ce_ctrl = R_CE_CTRL; 1426 asc->r_ctrl0 = R_CTRL0; 1427 asc->r_timings = R_TIMINGS; 1428 asc->nregs_timings = 1; 1429 asc->conf_enable_w0 = CONF_ENABLE_W0; 1430 asc->cs_num_max = 5; 1431 asc->segments = aspeed_2400_fmc_segments; 1432 asc->segment_addr_mask = 0xffff0000; 1433 asc->resets = aspeed_2400_fmc_resets; 1434 asc->flash_window_base = 0x20000000; 1435 asc->flash_window_size = 0x10000000; 1436 asc->features = ASPEED_SMC_FEATURE_DMA; 1437 asc->dma_flash_mask = 0x0FFFFFFC; 1438 asc->dma_dram_mask = 0x1FFFFFFC; 1439 asc->dma_start_length = 4; 1440 asc->nregs = ASPEED_SMC_R_MAX; 1441 asc->segment_to_reg = aspeed_smc_segment_to_reg; 1442 asc->reg_to_segment = aspeed_smc_reg_to_segment; 1443 asc->dma_ctrl = aspeed_smc_dma_ctrl; 1444 asc->reg_ops = &aspeed_smc_flash_ops; 1445 } 1446 1447 static const TypeInfo aspeed_2400_fmc_info = { 1448 .name = "aspeed.fmc-ast2400", 1449 .parent = TYPE_ASPEED_SMC, 1450 .class_init = aspeed_2400_fmc_class_init, 1451 }; 1452 1453 static const AspeedSegments aspeed_2400_spi1_segments[] = { 1454 { 0x30000000, 64 * MiB }, 1455 }; 1456 1457 static int aspeed_2400_spi1_addr_width(const AspeedSMCState *s) 1458 { 1459 return s->regs[R_SPI_CTRL0] & CTRL_AST2400_SPI_4BYTE ? 4 : 3; 1460 } 1461 1462 static void aspeed_2400_spi1_class_init(ObjectClass *klass, void *data) 1463 { 1464 DeviceClass *dc = DEVICE_CLASS(klass); 1465 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1466 1467 dc->desc = "Aspeed 2400 SPI1 Controller"; 1468 asc->r_conf = R_SPI_CONF; 1469 asc->r_ce_ctrl = 0xff; 1470 asc->r_ctrl0 = R_SPI_CTRL0; 1471 asc->r_timings = R_SPI_TIMINGS; 1472 asc->nregs_timings = 1; 1473 asc->conf_enable_w0 = SPI_CONF_ENABLE_W0; 1474 asc->cs_num_max = 1; 1475 asc->segments = aspeed_2400_spi1_segments; 1476 asc->flash_window_base = 0x30000000; 1477 asc->flash_window_size = 0x10000000; 1478 asc->features = 0x0; 1479 asc->nregs = ASPEED_SMC_R_SPI_MAX; 1480 asc->segment_to_reg = aspeed_smc_segment_to_reg; 1481 asc->reg_to_segment = aspeed_smc_reg_to_segment; 1482 asc->dma_ctrl = aspeed_smc_dma_ctrl; 1483 asc->addr_width = aspeed_2400_spi1_addr_width; 1484 asc->reg_ops = &aspeed_smc_flash_ops; 1485 } 1486 1487 static const TypeInfo aspeed_2400_spi1_info = { 1488 .name = "aspeed.spi1-ast2400", 1489 .parent = TYPE_ASPEED_SMC, 1490 .class_init = aspeed_2400_spi1_class_init, 1491 }; 1492 1493 static const uint32_t aspeed_2500_fmc_resets[ASPEED_SMC_R_MAX] = { 1494 [R_CONF] = (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0 | 1495 CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE1), 1496 }; 1497 1498 static const AspeedSegments aspeed_2500_fmc_segments[] = { 1499 { 0x20000000, 128 * MiB }, /* start address is readonly */ 1500 { 0x28000000, 32 * MiB }, 1501 { 0x2A000000, 32 * MiB }, 1502 }; 1503 1504 static void aspeed_2500_fmc_class_init(ObjectClass *klass, void *data) 1505 { 1506 DeviceClass *dc = DEVICE_CLASS(klass); 1507 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1508 1509 dc->desc = "Aspeed 2500 FMC Controller"; 1510 asc->r_conf = R_CONF; 1511 asc->r_ce_ctrl = R_CE_CTRL; 1512 asc->r_ctrl0 = R_CTRL0; 1513 asc->r_timings = R_TIMINGS; 1514 asc->nregs_timings = 1; 1515 asc->conf_enable_w0 = CONF_ENABLE_W0; 1516 asc->cs_num_max = 3; 1517 asc->segments = aspeed_2500_fmc_segments; 1518 asc->segment_addr_mask = 0xffff0000; 1519 asc->resets = aspeed_2500_fmc_resets; 1520 asc->flash_window_base = 0x20000000; 1521 asc->flash_window_size = 0x10000000; 1522 asc->features = ASPEED_SMC_FEATURE_DMA; 1523 asc->dma_flash_mask = 0x0FFFFFFC; 1524 asc->dma_dram_mask = 0x3FFFFFFC; 1525 asc->dma_start_length = 4; 1526 asc->nregs = ASPEED_SMC_R_MAX; 1527 asc->segment_to_reg = aspeed_smc_segment_to_reg; 1528 asc->reg_to_segment = aspeed_smc_reg_to_segment; 1529 asc->dma_ctrl = aspeed_smc_dma_ctrl; 1530 asc->reg_ops = &aspeed_smc_flash_ops; 1531 } 1532 1533 static const TypeInfo aspeed_2500_fmc_info = { 1534 .name = "aspeed.fmc-ast2500", 1535 .parent = TYPE_ASPEED_SMC, 1536 .class_init = aspeed_2500_fmc_class_init, 1537 }; 1538 1539 static const AspeedSegments aspeed_2500_spi1_segments[] = { 1540 { 0x30000000, 32 * MiB }, /* start address is readonly */ 1541 { 0x32000000, 96 * MiB }, /* end address is readonly */ 1542 }; 1543 1544 static void aspeed_2500_spi1_class_init(ObjectClass *klass, void *data) 1545 { 1546 DeviceClass *dc = DEVICE_CLASS(klass); 1547 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1548 1549 dc->desc = "Aspeed 2500 SPI1 Controller"; 1550 asc->r_conf = R_CONF; 1551 asc->r_ce_ctrl = R_CE_CTRL; 1552 asc->r_ctrl0 = R_CTRL0; 1553 asc->r_timings = R_TIMINGS; 1554 asc->nregs_timings = 1; 1555 asc->conf_enable_w0 = CONF_ENABLE_W0; 1556 asc->cs_num_max = 2; 1557 asc->segments = aspeed_2500_spi1_segments; 1558 asc->segment_addr_mask = 0xffff0000; 1559 asc->flash_window_base = 0x30000000; 1560 asc->flash_window_size = 0x8000000; 1561 asc->features = 0x0; 1562 asc->nregs = ASPEED_SMC_R_MAX; 1563 asc->segment_to_reg = aspeed_smc_segment_to_reg; 1564 asc->reg_to_segment = aspeed_smc_reg_to_segment; 1565 asc->dma_ctrl = aspeed_smc_dma_ctrl; 1566 asc->reg_ops = &aspeed_smc_flash_ops; 1567 } 1568 1569 static const TypeInfo aspeed_2500_spi1_info = { 1570 .name = "aspeed.spi1-ast2500", 1571 .parent = TYPE_ASPEED_SMC, 1572 .class_init = aspeed_2500_spi1_class_init, 1573 }; 1574 1575 static const AspeedSegments aspeed_2500_spi2_segments[] = { 1576 { 0x38000000, 32 * MiB }, /* start address is readonly */ 1577 { 0x3A000000, 96 * MiB }, /* end address is readonly */ 1578 }; 1579 1580 static void aspeed_2500_spi2_class_init(ObjectClass *klass, void *data) 1581 { 1582 DeviceClass *dc = DEVICE_CLASS(klass); 1583 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1584 1585 dc->desc = "Aspeed 2500 SPI2 Controller"; 1586 asc->r_conf = R_CONF; 1587 asc->r_ce_ctrl = R_CE_CTRL; 1588 asc->r_ctrl0 = R_CTRL0; 1589 asc->r_timings = R_TIMINGS; 1590 asc->nregs_timings = 1; 1591 asc->conf_enable_w0 = CONF_ENABLE_W0; 1592 asc->cs_num_max = 2; 1593 asc->segments = aspeed_2500_spi2_segments; 1594 asc->segment_addr_mask = 0xffff0000; 1595 asc->flash_window_base = 0x38000000; 1596 asc->flash_window_size = 0x8000000; 1597 asc->features = 0x0; 1598 asc->nregs = ASPEED_SMC_R_MAX; 1599 asc->segment_to_reg = aspeed_smc_segment_to_reg; 1600 asc->reg_to_segment = aspeed_smc_reg_to_segment; 1601 asc->dma_ctrl = aspeed_smc_dma_ctrl; 1602 asc->reg_ops = &aspeed_smc_flash_ops; 1603 } 1604 1605 static const TypeInfo aspeed_2500_spi2_info = { 1606 .name = "aspeed.spi2-ast2500", 1607 .parent = TYPE_ASPEED_SMC, 1608 .class_init = aspeed_2500_spi2_class_init, 1609 }; 1610 1611 /* 1612 * The Segment Registers of the AST2600 have a 1MB unit. The address 1613 * range of a flash SPI peripheral is encoded with offsets in the overall 1614 * controller window. The previous SoC AST2400 and AST2500 used 1615 * absolute addresses. Only bits [27:20] are relevant and the end 1616 * address is an upper bound limit. 1617 */ 1618 #define AST2600_SEG_ADDR_MASK 0x0ff00000 1619 1620 static uint32_t aspeed_2600_smc_segment_to_reg(const AspeedSMCState *s, 1621 const AspeedSegments *seg) 1622 { 1623 uint32_t reg = 0; 1624 1625 /* Disabled segments have a nil register */ 1626 if (!seg->size) { 1627 return 0; 1628 } 1629 1630 reg |= (seg->addr & AST2600_SEG_ADDR_MASK) >> 16; /* start offset */ 1631 reg |= (seg->addr + seg->size - 1) & AST2600_SEG_ADDR_MASK; /* end offset */ 1632 return reg; 1633 } 1634 1635 static void aspeed_2600_smc_reg_to_segment(const AspeedSMCState *s, 1636 uint32_t reg, AspeedSegments *seg) 1637 { 1638 uint32_t start_offset = (reg << 16) & AST2600_SEG_ADDR_MASK; 1639 uint32_t end_offset = reg & AST2600_SEG_ADDR_MASK; 1640 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 1641 1642 if (reg) { 1643 seg->addr = asc->flash_window_base + start_offset; 1644 seg->size = end_offset + MiB - start_offset; 1645 } else { 1646 seg->addr = asc->flash_window_base; 1647 seg->size = 0; 1648 } 1649 } 1650 1651 static const uint32_t aspeed_2600_fmc_resets[ASPEED_SMC_R_MAX] = { 1652 [R_CONF] = (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0 | 1653 CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE1 | 1654 CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE2), 1655 }; 1656 1657 static const AspeedSegments aspeed_2600_fmc_segments[] = { 1658 { 0x0, 128 * MiB }, /* start address is readonly */ 1659 { 128 * MiB, 128 * MiB }, /* default is disabled but needed for -kernel */ 1660 { 0x0, 0 }, /* disabled */ 1661 }; 1662 1663 static void aspeed_2600_fmc_class_init(ObjectClass *klass, void *data) 1664 { 1665 DeviceClass *dc = DEVICE_CLASS(klass); 1666 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1667 1668 dc->desc = "Aspeed 2600 FMC Controller"; 1669 asc->r_conf = R_CONF; 1670 asc->r_ce_ctrl = R_CE_CTRL; 1671 asc->r_ctrl0 = R_CTRL0; 1672 asc->r_timings = R_TIMINGS; 1673 asc->nregs_timings = 1; 1674 asc->conf_enable_w0 = CONF_ENABLE_W0; 1675 asc->cs_num_max = 3; 1676 asc->segments = aspeed_2600_fmc_segments; 1677 asc->segment_addr_mask = 0x0ff00ff0; 1678 asc->resets = aspeed_2600_fmc_resets; 1679 asc->flash_window_base = 0x20000000; 1680 asc->flash_window_size = 0x10000000; 1681 asc->features = ASPEED_SMC_FEATURE_DMA | 1682 ASPEED_SMC_FEATURE_WDT_CONTROL; 1683 asc->dma_flash_mask = 0x0FFFFFFC; 1684 asc->dma_dram_mask = 0x3FFFFFFC; 1685 asc->dma_start_length = 1; 1686 asc->nregs = ASPEED_SMC_R_MAX; 1687 asc->segment_to_reg = aspeed_2600_smc_segment_to_reg; 1688 asc->reg_to_segment = aspeed_2600_smc_reg_to_segment; 1689 asc->dma_ctrl = aspeed_2600_smc_dma_ctrl; 1690 asc->reg_ops = &aspeed_smc_flash_ops; 1691 } 1692 1693 static const TypeInfo aspeed_2600_fmc_info = { 1694 .name = "aspeed.fmc-ast2600", 1695 .parent = TYPE_ASPEED_SMC, 1696 .class_init = aspeed_2600_fmc_class_init, 1697 }; 1698 1699 static const AspeedSegments aspeed_2600_spi1_segments[] = { 1700 { 0x0, 128 * MiB }, /* start address is readonly */ 1701 { 0x0, 0 }, /* disabled */ 1702 }; 1703 1704 static void aspeed_2600_spi1_class_init(ObjectClass *klass, void *data) 1705 { 1706 DeviceClass *dc = DEVICE_CLASS(klass); 1707 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1708 1709 dc->desc = "Aspeed 2600 SPI1 Controller"; 1710 asc->r_conf = R_CONF; 1711 asc->r_ce_ctrl = R_CE_CTRL; 1712 asc->r_ctrl0 = R_CTRL0; 1713 asc->r_timings = R_TIMINGS; 1714 asc->nregs_timings = 2; 1715 asc->conf_enable_w0 = CONF_ENABLE_W0; 1716 asc->cs_num_max = 2; 1717 asc->segments = aspeed_2600_spi1_segments; 1718 asc->segment_addr_mask = 0x0ff00ff0; 1719 asc->flash_window_base = 0x30000000; 1720 asc->flash_window_size = 0x10000000; 1721 asc->features = ASPEED_SMC_FEATURE_DMA | 1722 ASPEED_SMC_FEATURE_DMA_GRANT; 1723 asc->dma_flash_mask = 0x0FFFFFFC; 1724 asc->dma_dram_mask = 0x3FFFFFFC; 1725 asc->dma_start_length = 1; 1726 asc->nregs = ASPEED_SMC_R_MAX; 1727 asc->segment_to_reg = aspeed_2600_smc_segment_to_reg; 1728 asc->reg_to_segment = aspeed_2600_smc_reg_to_segment; 1729 asc->dma_ctrl = aspeed_2600_smc_dma_ctrl; 1730 asc->reg_ops = &aspeed_smc_flash_ops; 1731 } 1732 1733 static const TypeInfo aspeed_2600_spi1_info = { 1734 .name = "aspeed.spi1-ast2600", 1735 .parent = TYPE_ASPEED_SMC, 1736 .class_init = aspeed_2600_spi1_class_init, 1737 }; 1738 1739 static const AspeedSegments aspeed_2600_spi2_segments[] = { 1740 { 0x0, 128 * MiB }, /* start address is readonly */ 1741 { 0x0, 0 }, /* disabled */ 1742 { 0x0, 0 }, /* disabled */ 1743 }; 1744 1745 static void aspeed_2600_spi2_class_init(ObjectClass *klass, void *data) 1746 { 1747 DeviceClass *dc = DEVICE_CLASS(klass); 1748 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1749 1750 dc->desc = "Aspeed 2600 SPI2 Controller"; 1751 asc->r_conf = R_CONF; 1752 asc->r_ce_ctrl = R_CE_CTRL; 1753 asc->r_ctrl0 = R_CTRL0; 1754 asc->r_timings = R_TIMINGS; 1755 asc->nregs_timings = 3; 1756 asc->conf_enable_w0 = CONF_ENABLE_W0; 1757 asc->cs_num_max = 3; 1758 asc->segments = aspeed_2600_spi2_segments; 1759 asc->segment_addr_mask = 0x0ff00ff0; 1760 asc->flash_window_base = 0x50000000; 1761 asc->flash_window_size = 0x10000000; 1762 asc->features = ASPEED_SMC_FEATURE_DMA | 1763 ASPEED_SMC_FEATURE_DMA_GRANT; 1764 asc->dma_flash_mask = 0x0FFFFFFC; 1765 asc->dma_dram_mask = 0x3FFFFFFC; 1766 asc->dma_start_length = 1; 1767 asc->nregs = ASPEED_SMC_R_MAX; 1768 asc->segment_to_reg = aspeed_2600_smc_segment_to_reg; 1769 asc->reg_to_segment = aspeed_2600_smc_reg_to_segment; 1770 asc->dma_ctrl = aspeed_2600_smc_dma_ctrl; 1771 asc->reg_ops = &aspeed_smc_flash_ops; 1772 } 1773 1774 static const TypeInfo aspeed_2600_spi2_info = { 1775 .name = "aspeed.spi2-ast2600", 1776 .parent = TYPE_ASPEED_SMC, 1777 .class_init = aspeed_2600_spi2_class_init, 1778 }; 1779 1780 /* 1781 * The FMC Segment Registers of the AST1030 have a 512KB unit. 1782 * Only bits [27:19] are used for decoding. 1783 */ 1784 #define AST1030_SEG_ADDR_MASK 0x0ff80000 1785 1786 static uint32_t aspeed_1030_smc_segment_to_reg(const AspeedSMCState *s, 1787 const AspeedSegments *seg) 1788 { 1789 uint32_t reg = 0; 1790 1791 /* Disabled segments have a nil register */ 1792 if (!seg->size) { 1793 return 0; 1794 } 1795 1796 reg |= (seg->addr & AST1030_SEG_ADDR_MASK) >> 16; /* start offset */ 1797 reg |= (seg->addr + seg->size - 1) & AST1030_SEG_ADDR_MASK; /* end offset */ 1798 return reg; 1799 } 1800 1801 static void aspeed_1030_smc_reg_to_segment(const AspeedSMCState *s, 1802 uint32_t reg, AspeedSegments *seg) 1803 { 1804 uint32_t start_offset = (reg << 16) & AST1030_SEG_ADDR_MASK; 1805 uint32_t end_offset = reg & AST1030_SEG_ADDR_MASK; 1806 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 1807 1808 if (reg) { 1809 seg->addr = asc->flash_window_base + start_offset; 1810 seg->size = end_offset + (512 * KiB) - start_offset; 1811 } else { 1812 seg->addr = asc->flash_window_base; 1813 seg->size = 0; 1814 } 1815 } 1816 1817 static const uint32_t aspeed_1030_fmc_resets[ASPEED_SMC_R_MAX] = { 1818 [R_CONF] = (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0 | 1819 CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE1), 1820 }; 1821 1822 static const AspeedSegments aspeed_1030_fmc_segments[] = { 1823 { 0x0, 128 * MiB }, /* start address is readonly */ 1824 { 128 * MiB, 128 * MiB }, /* default is disabled but needed for -kernel */ 1825 { 0x0, 0 }, /* disabled */ 1826 }; 1827 1828 static void aspeed_1030_fmc_class_init(ObjectClass *klass, void *data) 1829 { 1830 DeviceClass *dc = DEVICE_CLASS(klass); 1831 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1832 1833 dc->desc = "Aspeed 1030 FMC Controller"; 1834 asc->r_conf = R_CONF; 1835 asc->r_ce_ctrl = R_CE_CTRL; 1836 asc->r_ctrl0 = R_CTRL0; 1837 asc->r_timings = R_TIMINGS; 1838 asc->nregs_timings = 2; 1839 asc->conf_enable_w0 = CONF_ENABLE_W0; 1840 asc->cs_num_max = 2; 1841 asc->segments = aspeed_1030_fmc_segments; 1842 asc->segment_addr_mask = 0x0ff80ff8; 1843 asc->resets = aspeed_1030_fmc_resets; 1844 asc->flash_window_base = 0x80000000; 1845 asc->flash_window_size = 0x10000000; 1846 asc->features = ASPEED_SMC_FEATURE_DMA; 1847 asc->dma_flash_mask = 0x0FFFFFFC; 1848 asc->dma_dram_mask = 0x000BFFFC; 1849 asc->dma_start_length = 1; 1850 asc->nregs = ASPEED_SMC_R_MAX; 1851 asc->segment_to_reg = aspeed_1030_smc_segment_to_reg; 1852 asc->reg_to_segment = aspeed_1030_smc_reg_to_segment; 1853 asc->dma_ctrl = aspeed_2600_smc_dma_ctrl; 1854 asc->reg_ops = &aspeed_smc_flash_ops; 1855 } 1856 1857 static const TypeInfo aspeed_1030_fmc_info = { 1858 .name = "aspeed.fmc-ast1030", 1859 .parent = TYPE_ASPEED_SMC, 1860 .class_init = aspeed_1030_fmc_class_init, 1861 }; 1862 1863 static const AspeedSegments aspeed_1030_spi1_segments[] = { 1864 { 0x0, 128 * MiB }, /* start address is readonly */ 1865 { 0x0, 0 }, /* disabled */ 1866 }; 1867 1868 static void aspeed_1030_spi1_class_init(ObjectClass *klass, void *data) 1869 { 1870 DeviceClass *dc = DEVICE_CLASS(klass); 1871 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1872 1873 dc->desc = "Aspeed 1030 SPI1 Controller"; 1874 asc->r_conf = R_CONF; 1875 asc->r_ce_ctrl = R_CE_CTRL; 1876 asc->r_ctrl0 = R_CTRL0; 1877 asc->r_timings = R_TIMINGS; 1878 asc->nregs_timings = 2; 1879 asc->conf_enable_w0 = CONF_ENABLE_W0; 1880 asc->cs_num_max = 2; 1881 asc->segments = aspeed_1030_spi1_segments; 1882 asc->segment_addr_mask = 0x0ff00ff0; 1883 asc->flash_window_base = 0x90000000; 1884 asc->flash_window_size = 0x10000000; 1885 asc->features = ASPEED_SMC_FEATURE_DMA; 1886 asc->dma_flash_mask = 0x0FFFFFFC; 1887 asc->dma_dram_mask = 0x000BFFFC; 1888 asc->dma_start_length = 1; 1889 asc->nregs = ASPEED_SMC_R_MAX; 1890 asc->segment_to_reg = aspeed_2600_smc_segment_to_reg; 1891 asc->reg_to_segment = aspeed_2600_smc_reg_to_segment; 1892 asc->dma_ctrl = aspeed_2600_smc_dma_ctrl; 1893 asc->reg_ops = &aspeed_smc_flash_ops; 1894 } 1895 1896 static const TypeInfo aspeed_1030_spi1_info = { 1897 .name = "aspeed.spi1-ast1030", 1898 .parent = TYPE_ASPEED_SMC, 1899 .class_init = aspeed_1030_spi1_class_init, 1900 }; 1901 static const AspeedSegments aspeed_1030_spi2_segments[] = { 1902 { 0x0, 128 * MiB }, /* start address is readonly */ 1903 { 0x0, 0 }, /* disabled */ 1904 }; 1905 1906 static void aspeed_1030_spi2_class_init(ObjectClass *klass, void *data) 1907 { 1908 DeviceClass *dc = DEVICE_CLASS(klass); 1909 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 1910 1911 dc->desc = "Aspeed 1030 SPI2 Controller"; 1912 asc->r_conf = R_CONF; 1913 asc->r_ce_ctrl = R_CE_CTRL; 1914 asc->r_ctrl0 = R_CTRL0; 1915 asc->r_timings = R_TIMINGS; 1916 asc->nregs_timings = 2; 1917 asc->conf_enable_w0 = CONF_ENABLE_W0; 1918 asc->cs_num_max = 2; 1919 asc->segments = aspeed_1030_spi2_segments; 1920 asc->segment_addr_mask = 0x0ff00ff0; 1921 asc->flash_window_base = 0xb0000000; 1922 asc->flash_window_size = 0x10000000; 1923 asc->features = ASPEED_SMC_FEATURE_DMA; 1924 asc->dma_flash_mask = 0x0FFFFFFC; 1925 asc->dma_dram_mask = 0x000BFFFC; 1926 asc->dma_start_length = 1; 1927 asc->nregs = ASPEED_SMC_R_MAX; 1928 asc->segment_to_reg = aspeed_2600_smc_segment_to_reg; 1929 asc->reg_to_segment = aspeed_2600_smc_reg_to_segment; 1930 asc->dma_ctrl = aspeed_2600_smc_dma_ctrl; 1931 asc->reg_ops = &aspeed_smc_flash_ops; 1932 } 1933 1934 static const TypeInfo aspeed_1030_spi2_info = { 1935 .name = "aspeed.spi2-ast1030", 1936 .parent = TYPE_ASPEED_SMC, 1937 .class_init = aspeed_1030_spi2_class_init, 1938 }; 1939 1940 /* 1941 * The FMC Segment Registers of the AST2700 have a 64KB unit. 1942 * Only bits [31:16] are used for decoding. 1943 */ 1944 #define AST2700_SEG_ADDR_MASK 0xffff0000 1945 1946 static uint32_t aspeed_2700_smc_segment_to_reg(const AspeedSMCState *s, 1947 const AspeedSegments *seg) 1948 { 1949 uint32_t reg = 0; 1950 1951 /* Disabled segments have a nil register */ 1952 if (!seg->size) { 1953 return 0; 1954 } 1955 1956 reg |= (seg->addr & AST2700_SEG_ADDR_MASK) >> 16; /* start offset */ 1957 reg |= (seg->addr + seg->size - 1) & AST2700_SEG_ADDR_MASK; /* end offset */ 1958 return reg; 1959 } 1960 1961 static void aspeed_2700_smc_reg_to_segment(const AspeedSMCState *s, 1962 uint32_t reg, AspeedSegments *seg) 1963 { 1964 uint32_t start_offset = (reg << 16) & AST2700_SEG_ADDR_MASK; 1965 uint32_t end_offset = reg & AST2700_SEG_ADDR_MASK; 1966 AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s); 1967 1968 if (reg) { 1969 seg->addr = asc->flash_window_base + start_offset; 1970 seg->size = end_offset + (64 * KiB) - start_offset; 1971 } else { 1972 seg->addr = asc->flash_window_base; 1973 seg->size = 0; 1974 } 1975 } 1976 1977 static const uint32_t aspeed_2700_fmc_resets[ASPEED_SMC_R_MAX] = { 1978 [R_CONF] = (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0 | 1979 CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE1), 1980 [R_CE_CTRL] = 0x0000aa00, 1981 [R_CTRL0] = 0x406b0641, 1982 [R_CTRL1] = 0x00000400, 1983 [R_CTRL2] = 0x00000400, 1984 [R_CTRL3] = 0x00000400, 1985 [R_SEG_ADDR0] = 0x08000000, 1986 [R_SEG_ADDR1] = 0x10000800, 1987 [R_SEG_ADDR2] = 0x00000000, 1988 [R_SEG_ADDR3] = 0x00000000, 1989 [R_DUMMY_DATA] = 0x00010000, 1990 [R_DMA_DRAM_ADDR_HIGH] = 0x00000000, 1991 [R_TIMINGS] = 0x007b0000, 1992 }; 1993 1994 static const MemoryRegionOps aspeed_2700_smc_flash_ops = { 1995 .read = aspeed_smc_flash_read, 1996 .write = aspeed_smc_flash_write, 1997 .endianness = DEVICE_LITTLE_ENDIAN, 1998 .valid = { 1999 .min_access_size = 1, 2000 .max_access_size = 8, 2001 }, 2002 }; 2003 2004 static const AspeedSegments aspeed_2700_fmc_segments[] = { 2005 { 0x0, 128 * MiB }, /* start address is readonly */ 2006 { 128 * MiB, 128 * MiB }, /* default is disabled but needed for -kernel */ 2007 { 256 * MiB, 128 * MiB }, /* default is disabled but needed for -kernel */ 2008 { 0x0, 0 }, /* disabled */ 2009 }; 2010 2011 static void aspeed_2700_fmc_class_init(ObjectClass *klass, void *data) 2012 { 2013 DeviceClass *dc = DEVICE_CLASS(klass); 2014 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 2015 2016 dc->desc = "Aspeed 2700 FMC Controller"; 2017 asc->r_conf = R_CONF; 2018 asc->r_ce_ctrl = R_CE_CTRL; 2019 asc->r_ctrl0 = R_CTRL0; 2020 asc->r_timings = R_TIMINGS; 2021 asc->nregs_timings = 3; 2022 asc->conf_enable_w0 = CONF_ENABLE_W0; 2023 asc->cs_num_max = 3; 2024 asc->segments = aspeed_2700_fmc_segments; 2025 asc->segment_addr_mask = 0xffffffff; 2026 asc->resets = aspeed_2700_fmc_resets; 2027 asc->flash_window_base = 0x100000000; 2028 asc->flash_window_size = 1 * GiB; 2029 asc->features = ASPEED_SMC_FEATURE_DMA | 2030 ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH; 2031 asc->dma_flash_mask = 0x2FFFFFFC; 2032 asc->dma_dram_mask = 0xFFFFFFFC; 2033 asc->dma_start_length = 1; 2034 asc->nregs = ASPEED_SMC_R_MAX; 2035 asc->segment_to_reg = aspeed_2700_smc_segment_to_reg; 2036 asc->reg_to_segment = aspeed_2700_smc_reg_to_segment; 2037 asc->dma_ctrl = aspeed_2600_smc_dma_ctrl; 2038 asc->reg_ops = &aspeed_2700_smc_flash_ops; 2039 } 2040 2041 static const TypeInfo aspeed_2700_fmc_info = { 2042 .name = "aspeed.fmc-ast2700", 2043 .parent = TYPE_ASPEED_SMC, 2044 .class_init = aspeed_2700_fmc_class_init, 2045 }; 2046 2047 static const AspeedSegments aspeed_2700_spi0_segments[] = { 2048 { 0x0, 128 * MiB }, /* start address is readonly */ 2049 { 128 * MiB, 128 * MiB }, /* start address is readonly */ 2050 { 0x0, 0 }, /* disabled */ 2051 }; 2052 2053 static void aspeed_2700_spi0_class_init(ObjectClass *klass, void *data) 2054 { 2055 DeviceClass *dc = DEVICE_CLASS(klass); 2056 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 2057 2058 dc->desc = "Aspeed 2700 SPI0 Controller"; 2059 asc->r_conf = R_CONF; 2060 asc->r_ce_ctrl = R_CE_CTRL; 2061 asc->r_ctrl0 = R_CTRL0; 2062 asc->r_timings = R_TIMINGS; 2063 asc->nregs_timings = 2; 2064 asc->conf_enable_w0 = CONF_ENABLE_W0; 2065 asc->cs_num_max = 2; 2066 asc->segments = aspeed_2700_spi0_segments; 2067 asc->segment_addr_mask = 0xffffffff; 2068 asc->flash_window_base = 0x180000000; 2069 asc->flash_window_size = 1 * GiB; 2070 asc->features = ASPEED_SMC_FEATURE_DMA | 2071 ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH; 2072 asc->dma_flash_mask = 0x2FFFFFFC; 2073 asc->dma_dram_mask = 0xFFFFFFFC; 2074 asc->dma_start_length = 1; 2075 asc->nregs = ASPEED_SMC_R_MAX; 2076 asc->segment_to_reg = aspeed_2700_smc_segment_to_reg; 2077 asc->reg_to_segment = aspeed_2700_smc_reg_to_segment; 2078 asc->dma_ctrl = aspeed_2600_smc_dma_ctrl; 2079 asc->reg_ops = &aspeed_2700_smc_flash_ops; 2080 } 2081 2082 static const TypeInfo aspeed_2700_spi0_info = { 2083 .name = "aspeed.spi0-ast2700", 2084 .parent = TYPE_ASPEED_SMC, 2085 .class_init = aspeed_2700_spi0_class_init, 2086 }; 2087 2088 static const AspeedSegments aspeed_2700_spi1_segments[] = { 2089 { 0x0, 128 * MiB }, /* start address is readonly */ 2090 { 0x0, 0 }, /* disabled */ 2091 }; 2092 2093 static void aspeed_2700_spi1_class_init(ObjectClass *klass, void *data) 2094 { 2095 DeviceClass *dc = DEVICE_CLASS(klass); 2096 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 2097 2098 dc->desc = "Aspeed 2700 SPI1 Controller"; 2099 asc->r_conf = R_CONF; 2100 asc->r_ce_ctrl = R_CE_CTRL; 2101 asc->r_ctrl0 = R_CTRL0; 2102 asc->r_timings = R_TIMINGS; 2103 asc->nregs_timings = 2; 2104 asc->conf_enable_w0 = CONF_ENABLE_W0; 2105 asc->cs_num_max = 2; 2106 asc->segments = aspeed_2700_spi1_segments; 2107 asc->segment_addr_mask = 0xffffffff; 2108 asc->flash_window_base = 0x200000000; 2109 asc->flash_window_size = 1 * GiB; 2110 asc->features = ASPEED_SMC_FEATURE_DMA | 2111 ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH; 2112 asc->dma_flash_mask = 0x2FFFFFFC; 2113 asc->dma_dram_mask = 0xFFFFFFFC; 2114 asc->dma_start_length = 1; 2115 asc->nregs = ASPEED_SMC_R_MAX; 2116 asc->segment_to_reg = aspeed_2700_smc_segment_to_reg; 2117 asc->reg_to_segment = aspeed_2700_smc_reg_to_segment; 2118 asc->dma_ctrl = aspeed_2600_smc_dma_ctrl; 2119 asc->reg_ops = &aspeed_2700_smc_flash_ops; 2120 } 2121 2122 static const TypeInfo aspeed_2700_spi1_info = { 2123 .name = "aspeed.spi1-ast2700", 2124 .parent = TYPE_ASPEED_SMC, 2125 .class_init = aspeed_2700_spi1_class_init, 2126 }; 2127 2128 static const AspeedSegments aspeed_2700_spi2_segments[] = { 2129 { 0x0, 128 * MiB }, /* start address is readonly */ 2130 { 0x0, 0 }, /* disabled */ 2131 }; 2132 2133 static void aspeed_2700_spi2_class_init(ObjectClass *klass, void *data) 2134 { 2135 DeviceClass *dc = DEVICE_CLASS(klass); 2136 AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass); 2137 2138 dc->desc = "Aspeed 2700 SPI2 Controller"; 2139 asc->r_conf = R_CONF; 2140 asc->r_ce_ctrl = R_CE_CTRL; 2141 asc->r_ctrl0 = R_CTRL0; 2142 asc->r_timings = R_TIMINGS; 2143 asc->nregs_timings = 2; 2144 asc->conf_enable_w0 = CONF_ENABLE_W0; 2145 asc->cs_num_max = 2; 2146 asc->segments = aspeed_2700_spi2_segments; 2147 asc->segment_addr_mask = 0xffffffff; 2148 asc->flash_window_base = 0x280000000; 2149 asc->flash_window_size = 1 * GiB; 2150 asc->features = ASPEED_SMC_FEATURE_DMA | 2151 ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH; 2152 asc->dma_flash_mask = 0x0FFFFFFC; 2153 asc->dma_dram_mask = 0xFFFFFFFC; 2154 asc->dma_start_length = 1; 2155 asc->nregs = ASPEED_SMC_R_MAX; 2156 asc->segment_to_reg = aspeed_2700_smc_segment_to_reg; 2157 asc->reg_to_segment = aspeed_2700_smc_reg_to_segment; 2158 asc->dma_ctrl = aspeed_2600_smc_dma_ctrl; 2159 asc->reg_ops = &aspeed_2700_smc_flash_ops; 2160 } 2161 2162 static const TypeInfo aspeed_2700_spi2_info = { 2163 .name = "aspeed.spi2-ast2700", 2164 .parent = TYPE_ASPEED_SMC, 2165 .class_init = aspeed_2700_spi2_class_init, 2166 }; 2167 2168 static void aspeed_smc_register_types(void) 2169 { 2170 type_register_static(&aspeed_smc_flash_info); 2171 type_register_static(&aspeed_smc_info); 2172 type_register_static(&aspeed_2400_smc_info); 2173 type_register_static(&aspeed_2400_fmc_info); 2174 type_register_static(&aspeed_2400_spi1_info); 2175 type_register_static(&aspeed_2500_fmc_info); 2176 type_register_static(&aspeed_2500_spi1_info); 2177 type_register_static(&aspeed_2500_spi2_info); 2178 type_register_static(&aspeed_2600_fmc_info); 2179 type_register_static(&aspeed_2600_spi1_info); 2180 type_register_static(&aspeed_2600_spi2_info); 2181 type_register_static(&aspeed_1030_fmc_info); 2182 type_register_static(&aspeed_1030_spi1_info); 2183 type_register_static(&aspeed_1030_spi2_info); 2184 type_register_static(&aspeed_2700_fmc_info); 2185 type_register_static(&aspeed_2700_spi0_info); 2186 type_register_static(&aspeed_2700_spi1_info); 2187 type_register_static(&aspeed_2700_spi2_info); 2188 } 2189 2190 type_init(aspeed_smc_register_types) 2191