xref: /openbmc/qemu/hw/char/mcf_uart.c (revision f213ccc9)
1 /*
2  * ColdFire UART emulation.
3  *
4  * Copyright (c) 2007 CodeSourcery.
5  *
6  * This code is licensed under the GPL
7  */
8 
9 #include "qemu/osdep.h"
10 #include "hw/irq.h"
11 #include "hw/sysbus.h"
12 #include "qemu/module.h"
13 #include "qapi/error.h"
14 #include "hw/m68k/mcf.h"
15 #include "hw/qdev-properties.h"
16 #include "hw/qdev-properties-system.h"
17 #include "chardev/char-fe.h"
18 #include "qom/object.h"
19 
20 struct mcf_uart_state {
21     SysBusDevice parent_obj;
22 
23     MemoryRegion iomem;
24     uint8_t mr[2];
25     uint8_t sr;
26     uint8_t isr;
27     uint8_t imr;
28     uint8_t bg1;
29     uint8_t bg2;
30     uint8_t fifo[4];
31     uint8_t tb;
32     int current_mr;
33     int fifo_len;
34     int tx_enabled;
35     int rx_enabled;
36     qemu_irq irq;
37     CharBackend chr;
38 };
39 
40 #define TYPE_MCF_UART "mcf-uart"
OBJECT_DECLARE_SIMPLE_TYPE(mcf_uart_state,MCF_UART)41 OBJECT_DECLARE_SIMPLE_TYPE(mcf_uart_state, MCF_UART)
42 
43 /* UART Status Register bits.  */
44 #define MCF_UART_RxRDY  0x01
45 #define MCF_UART_FFULL  0x02
46 #define MCF_UART_TxRDY  0x04
47 #define MCF_UART_TxEMP  0x08
48 #define MCF_UART_OE     0x10
49 #define MCF_UART_PE     0x20
50 #define MCF_UART_FE     0x40
51 #define MCF_UART_RB     0x80
52 
53 /* Interrupt flags.  */
54 #define MCF_UART_TxINT  0x01
55 #define MCF_UART_RxINT  0x02
56 #define MCF_UART_DBINT  0x04
57 #define MCF_UART_COSINT 0x80
58 
59 /* UMR1 flags.  */
60 #define MCF_UART_BC0    0x01
61 #define MCF_UART_BC1    0x02
62 #define MCF_UART_PT     0x04
63 #define MCF_UART_PM0    0x08
64 #define MCF_UART_PM1    0x10
65 #define MCF_UART_ERR    0x20
66 #define MCF_UART_RxIRQ  0x40
67 #define MCF_UART_RxRTS  0x80
68 
69 static void mcf_uart_update(mcf_uart_state *s)
70 {
71     s->isr &= ~(MCF_UART_TxINT | MCF_UART_RxINT);
72     if (s->sr & MCF_UART_TxRDY)
73         s->isr |= MCF_UART_TxINT;
74     if ((s->sr & ((s->mr[0] & MCF_UART_RxIRQ)
75                   ? MCF_UART_FFULL : MCF_UART_RxRDY)) != 0)
76         s->isr |= MCF_UART_RxINT;
77 
78     qemu_set_irq(s->irq, (s->isr & s->imr) != 0);
79 }
80 
mcf_uart_read(void * opaque,hwaddr addr,unsigned size)81 uint64_t mcf_uart_read(void *opaque, hwaddr addr,
82                        unsigned size)
83 {
84     mcf_uart_state *s = (mcf_uart_state *)opaque;
85     switch (addr & 0x3f) {
86     case 0x00:
87         return s->mr[s->current_mr];
88     case 0x04:
89         return s->sr;
90     case 0x0c:
91         {
92             uint8_t val;
93             int i;
94 
95             if (s->fifo_len == 0)
96                 return 0;
97 
98             val = s->fifo[0];
99             s->fifo_len--;
100             for (i = 0; i < s->fifo_len; i++)
101                 s->fifo[i] = s->fifo[i + 1];
102             s->sr &= ~MCF_UART_FFULL;
103             if (s->fifo_len == 0)
104                 s->sr &= ~MCF_UART_RxRDY;
105             mcf_uart_update(s);
106             qemu_chr_fe_accept_input(&s->chr);
107             return val;
108         }
109     case 0x10:
110         /* TODO: Implement IPCR.  */
111         return 0;
112     case 0x14:
113         return s->isr;
114     case 0x18:
115         return s->bg1;
116     case 0x1c:
117         return s->bg2;
118     default:
119         return 0;
120     }
121 }
122 
123 /* Update TxRDY flag and set data if present and enabled.  */
mcf_uart_do_tx(mcf_uart_state * s)124 static void mcf_uart_do_tx(mcf_uart_state *s)
125 {
126     if (s->tx_enabled && (s->sr & MCF_UART_TxEMP) == 0) {
127         /* XXX this blocks entire thread. Rewrite to use
128          * qemu_chr_fe_write and background I/O callbacks */
129         qemu_chr_fe_write_all(&s->chr, (unsigned char *)&s->tb, 1);
130         s->sr |= MCF_UART_TxEMP;
131     }
132     if (s->tx_enabled) {
133         s->sr |= MCF_UART_TxRDY;
134     } else {
135         s->sr &= ~MCF_UART_TxRDY;
136     }
137 }
138 
mcf_do_command(mcf_uart_state * s,uint8_t cmd)139 static void mcf_do_command(mcf_uart_state *s, uint8_t cmd)
140 {
141     /* Misc command.  */
142     switch ((cmd >> 4) & 7) {
143     case 0: /* No-op.  */
144         break;
145     case 1: /* Reset mode register pointer.  */
146         s->current_mr = 0;
147         break;
148     case 2: /* Reset receiver.  */
149         s->rx_enabled = 0;
150         s->fifo_len = 0;
151         s->sr &= ~(MCF_UART_RxRDY | MCF_UART_FFULL);
152         break;
153     case 3: /* Reset transmitter.  */
154         s->tx_enabled = 0;
155         s->sr |= MCF_UART_TxEMP;
156         s->sr &= ~MCF_UART_TxRDY;
157         break;
158     case 4: /* Reset error status.  */
159         break;
160     case 5: /* Reset break-change interrupt.  */
161         s->isr &= ~MCF_UART_DBINT;
162         break;
163     case 6: /* Start break.  */
164     case 7: /* Stop break.  */
165         break;
166     }
167 
168     /* Transmitter command.  */
169     switch ((cmd >> 2) & 3) {
170     case 0: /* No-op.  */
171         break;
172     case 1: /* Enable.  */
173         s->tx_enabled = 1;
174         mcf_uart_do_tx(s);
175         break;
176     case 2: /* Disable.  */
177         s->tx_enabled = 0;
178         mcf_uart_do_tx(s);
179         break;
180     case 3: /* Reserved.  */
181         fprintf(stderr, "mcf_uart: Bad TX command\n");
182         break;
183     }
184 
185     /* Receiver command.  */
186     switch (cmd & 3) {
187     case 0: /* No-op.  */
188         break;
189     case 1: /* Enable.  */
190         s->rx_enabled = 1;
191         break;
192     case 2:
193         s->rx_enabled = 0;
194         break;
195     case 3: /* Reserved.  */
196         fprintf(stderr, "mcf_uart: Bad RX command\n");
197         break;
198     }
199 }
200 
mcf_uart_write(void * opaque,hwaddr addr,uint64_t val,unsigned size)201 void mcf_uart_write(void *opaque, hwaddr addr,
202                     uint64_t val, unsigned size)
203 {
204     mcf_uart_state *s = (mcf_uart_state *)opaque;
205     switch (addr & 0x3f) {
206     case 0x00:
207         s->mr[s->current_mr] = val;
208         s->current_mr = 1;
209         break;
210     case 0x04:
211         /* CSR is ignored.  */
212         break;
213     case 0x08: /* Command Register.  */
214         mcf_do_command(s, val);
215         break;
216     case 0x0c: /* Transmit Buffer.  */
217         s->sr &= ~MCF_UART_TxEMP;
218         s->tb = val;
219         mcf_uart_do_tx(s);
220         break;
221     case 0x10:
222         /* ACR is ignored.  */
223         break;
224     case 0x14:
225         s->imr = val;
226         break;
227     default:
228         break;
229     }
230     mcf_uart_update(s);
231 }
232 
mcf_uart_reset(DeviceState * dev)233 static void mcf_uart_reset(DeviceState *dev)
234 {
235     mcf_uart_state *s = MCF_UART(dev);
236 
237     s->fifo_len = 0;
238     s->mr[0] = 0;
239     s->mr[1] = 0;
240     s->sr = MCF_UART_TxEMP;
241     s->tx_enabled = 0;
242     s->rx_enabled = 0;
243     s->isr = 0;
244     s->imr = 0;
245 }
246 
mcf_uart_push_byte(mcf_uart_state * s,uint8_t data)247 static void mcf_uart_push_byte(mcf_uart_state *s, uint8_t data)
248 {
249     /* Break events overwrite the last byte if the fifo is full.  */
250     if (s->fifo_len == 4)
251         s->fifo_len--;
252 
253     s->fifo[s->fifo_len] = data;
254     s->fifo_len++;
255     s->sr |= MCF_UART_RxRDY;
256     if (s->fifo_len == 4)
257         s->sr |= MCF_UART_FFULL;
258 
259     mcf_uart_update(s);
260 }
261 
mcf_uart_event(void * opaque,QEMUChrEvent event)262 static void mcf_uart_event(void *opaque, QEMUChrEvent event)
263 {
264     mcf_uart_state *s = (mcf_uart_state *)opaque;
265 
266     switch (event) {
267     case CHR_EVENT_BREAK:
268         s->isr |= MCF_UART_DBINT;
269         mcf_uart_push_byte(s, 0);
270         break;
271     default:
272         break;
273     }
274 }
275 
mcf_uart_can_receive(void * opaque)276 static int mcf_uart_can_receive(void *opaque)
277 {
278     mcf_uart_state *s = (mcf_uart_state *)opaque;
279 
280     return s->rx_enabled && (s->sr & MCF_UART_FFULL) == 0;
281 }
282 
mcf_uart_receive(void * opaque,const uint8_t * buf,int size)283 static void mcf_uart_receive(void *opaque, const uint8_t *buf, int size)
284 {
285     mcf_uart_state *s = (mcf_uart_state *)opaque;
286 
287     mcf_uart_push_byte(s, buf[0]);
288 }
289 
290 static const MemoryRegionOps mcf_uart_ops = {
291     .read = mcf_uart_read,
292     .write = mcf_uart_write,
293     .endianness = DEVICE_NATIVE_ENDIAN,
294 };
295 
mcf_uart_instance_init(Object * obj)296 static void mcf_uart_instance_init(Object *obj)
297 {
298     SysBusDevice *dev = SYS_BUS_DEVICE(obj);
299     mcf_uart_state *s = MCF_UART(dev);
300 
301     memory_region_init_io(&s->iomem, obj, &mcf_uart_ops, s, "uart", 0x40);
302     sysbus_init_mmio(dev, &s->iomem);
303 
304     sysbus_init_irq(dev, &s->irq);
305 }
306 
mcf_uart_realize(DeviceState * dev,Error ** errp)307 static void mcf_uart_realize(DeviceState *dev, Error **errp)
308 {
309     mcf_uart_state *s = MCF_UART(dev);
310 
311     qemu_chr_fe_set_handlers(&s->chr, mcf_uart_can_receive, mcf_uart_receive,
312                              mcf_uart_event, NULL, s, NULL, true);
313 }
314 
315 static Property mcf_uart_properties[] = {
316     DEFINE_PROP_CHR("chardev", mcf_uart_state, chr),
317     DEFINE_PROP_END_OF_LIST(),
318 };
319 
mcf_uart_class_init(ObjectClass * oc,void * data)320 static void mcf_uart_class_init(ObjectClass *oc, void *data)
321 {
322     DeviceClass *dc = DEVICE_CLASS(oc);
323 
324     dc->realize = mcf_uart_realize;
325     dc->reset = mcf_uart_reset;
326     device_class_set_props(dc, mcf_uart_properties);
327     set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
328 }
329 
330 static const TypeInfo mcf_uart_info = {
331     .name          = TYPE_MCF_UART,
332     .parent        = TYPE_SYS_BUS_DEVICE,
333     .instance_size = sizeof(mcf_uart_state),
334     .instance_init = mcf_uart_instance_init,
335     .class_init    = mcf_uart_class_init,
336 };
337 
mcf_uart_register(void)338 static void mcf_uart_register(void)
339 {
340     type_register_static(&mcf_uart_info);
341 }
342 
type_init(mcf_uart_register)343 type_init(mcf_uart_register)
344 
345 DeviceState *mcf_uart_create(qemu_irq irq, Chardev *chrdrv)
346 {
347     DeviceState *dev;
348 
349     dev = qdev_new(TYPE_MCF_UART);
350     if (chrdrv) {
351         qdev_prop_set_chr(dev, "chardev", chrdrv);
352     }
353     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
354     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq);
355 
356     return dev;
357 }
358 
mcf_uart_create_mmap(hwaddr base,qemu_irq irq,Chardev * chrdrv)359 DeviceState *mcf_uart_create_mmap(hwaddr base, qemu_irq irq, Chardev *chrdrv)
360 {
361     DeviceState *dev;
362 
363     dev = mcf_uart_create(irq, chrdrv);
364     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
365 
366     return dev;
367 }
368