1 /* 2 * CFI parallel flash with Intel command set emulation 3 * 4 * Copyright (c) 2006 Thorsten Zitterell 5 * Copyright (c) 2005 Jocelyn Mayer 6 * 7 * This library is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU Lesser General Public 9 * License as published by the Free Software Foundation; either 10 * version 2.1 of the License, or (at your option) any later version. 11 * 12 * This library is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 15 * Lesser General Public License for more details. 16 * 17 * You should have received a copy of the GNU Lesser General Public 18 * License along with this library; if not, see <http://www.gnu.org/licenses/>. 19 */ 20 21 /* 22 * For now, this code can emulate flashes of 1, 2 or 4 bytes width. 23 * Supported commands/modes are: 24 * - flash read 25 * - flash write 26 * - flash ID read 27 * - sector erase 28 * - CFI queries 29 * 30 * It does not support timings 31 * It does not support flash interleaving 32 * It does not implement software data protection as found in many real chips 33 * It does not implement erase suspend/resume commands 34 * It does not implement multiple sectors erase 35 * 36 * It does not implement much more ... 37 */ 38 39 #include "qemu/osdep.h" 40 #include "hw/block/block.h" 41 #include "hw/block/flash.h" 42 #include "hw/qdev-properties.h" 43 #include "hw/qdev-properties-system.h" 44 #include "sysemu/block-backend.h" 45 #include "qapi/error.h" 46 #include "qemu/error-report.h" 47 #include "qemu/bitops.h" 48 #include "qemu/host-utils.h" 49 #include "qemu/log.h" 50 #include "qemu/module.h" 51 #include "qemu/option.h" 52 #include "hw/sysbus.h" 53 #include "migration/vmstate.h" 54 #include "sysemu/blockdev.h" 55 #include "sysemu/runstate.h" 56 #include "trace.h" 57 58 #define PFLASH_BE 0 59 #define PFLASH_SECURE 1 60 61 struct PFlashCFI01 { 62 /*< private >*/ 63 SysBusDevice parent_obj; 64 /*< public >*/ 65 66 BlockBackend *blk; 67 uint32_t nb_blocs; 68 uint64_t sector_len; 69 uint8_t bank_width; 70 uint8_t device_width; /* If 0, device width not specified. */ 71 uint8_t max_device_width; /* max device width in bytes */ 72 uint32_t features; 73 uint8_t wcycle; /* if 0, the flash is read normally */ 74 bool ro; 75 uint8_t cmd; 76 uint8_t status; 77 uint16_t ident0; 78 uint16_t ident1; 79 uint16_t ident2; 80 uint16_t ident3; 81 uint8_t cfi_table[0x52]; 82 uint64_t counter; 83 uint32_t writeblock_size; 84 MemoryRegion mem; 85 char *name; 86 void *storage; 87 VMChangeStateEntry *vmstate; 88 bool old_multiple_chip_handling; 89 90 /* block update buffer */ 91 unsigned char *blk_bytes; 92 uint32_t blk_offset; 93 }; 94 95 static int pflash_post_load(void *opaque, int version_id); 96 97 static bool pflash_blk_write_state_needed(void *opaque) 98 { 99 PFlashCFI01 *pfl = opaque; 100 101 return (pfl->blk_offset != -1); 102 } 103 104 static const VMStateDescription vmstate_pflash_blk_write = { 105 .name = "pflash_cfi01_blk_write", 106 .version_id = 1, 107 .minimum_version_id = 1, 108 .needed = pflash_blk_write_state_needed, 109 .fields = (const VMStateField[]) { 110 VMSTATE_VBUFFER_UINT32(blk_bytes, PFlashCFI01, 0, NULL, writeblock_size), 111 VMSTATE_UINT32(blk_offset, PFlashCFI01), 112 VMSTATE_END_OF_LIST() 113 } 114 }; 115 116 static const VMStateDescription vmstate_pflash = { 117 .name = "pflash_cfi01", 118 .version_id = 1, 119 .minimum_version_id = 1, 120 .post_load = pflash_post_load, 121 .fields = (const VMStateField[]) { 122 VMSTATE_UINT8(wcycle, PFlashCFI01), 123 VMSTATE_UINT8(cmd, PFlashCFI01), 124 VMSTATE_UINT8(status, PFlashCFI01), 125 VMSTATE_UINT64(counter, PFlashCFI01), 126 VMSTATE_END_OF_LIST() 127 }, 128 .subsections = (const VMStateDescription * const []) { 129 &vmstate_pflash_blk_write, 130 NULL 131 } 132 }; 133 134 /* 135 * Perform a CFI query based on the bank width of the flash. 136 * If this code is called we know we have a device_width set for 137 * this flash. 138 */ 139 static uint32_t pflash_cfi_query(PFlashCFI01 *pfl, hwaddr offset) 140 { 141 int i; 142 uint32_t resp = 0; 143 hwaddr boff; 144 145 /* 146 * Adjust incoming offset to match expected device-width 147 * addressing. CFI query addresses are always specified in terms of 148 * the maximum supported width of the device. This means that x8 149 * devices and x8/x16 devices in x8 mode behave differently. For 150 * devices that are not used at their max width, we will be 151 * provided with addresses that use higher address bits than 152 * expected (based on the max width), so we will shift them lower 153 * so that they will match the addresses used when 154 * device_width==max_device_width. 155 */ 156 boff = offset >> (ctz32(pfl->bank_width) + 157 ctz32(pfl->max_device_width) - ctz32(pfl->device_width)); 158 159 if (boff >= sizeof(pfl->cfi_table)) { 160 return 0; 161 } 162 /* 163 * Now we will construct the CFI response generated by a single 164 * device, then replicate that for all devices that make up the 165 * bus. For wide parts used in x8 mode, CFI query responses 166 * are different than native byte-wide parts. 167 */ 168 resp = pfl->cfi_table[boff]; 169 if (pfl->device_width != pfl->max_device_width) { 170 /* The only case currently supported is x8 mode for a 171 * wider part. 172 */ 173 if (pfl->device_width != 1 || pfl->bank_width > 4) { 174 trace_pflash_unsupported_device_configuration(pfl->name, 175 pfl->device_width, pfl->max_device_width); 176 return 0; 177 } 178 /* CFI query data is repeated, rather than zero padded for 179 * wide devices used in x8 mode. 180 */ 181 for (i = 1; i < pfl->max_device_width; i++) { 182 resp = deposit32(resp, 8 * i, 8, pfl->cfi_table[boff]); 183 } 184 } 185 /* Replicate responses for each device in bank. */ 186 if (pfl->device_width < pfl->bank_width) { 187 for (i = pfl->device_width; 188 i < pfl->bank_width; i += pfl->device_width) { 189 resp = deposit32(resp, 8 * i, 8 * pfl->device_width, resp); 190 } 191 } 192 193 return resp; 194 } 195 196 197 198 /* Perform a device id query based on the bank width of the flash. */ 199 static uint32_t pflash_devid_query(PFlashCFI01 *pfl, hwaddr offset) 200 { 201 int i; 202 uint32_t resp; 203 hwaddr boff; 204 205 /* 206 * Adjust incoming offset to match expected device-width 207 * addressing. Device ID read addresses are always specified in 208 * terms of the maximum supported width of the device. This means 209 * that x8 devices and x8/x16 devices in x8 mode behave 210 * differently. For devices that are not used at their max width, 211 * we will be provided with addresses that use higher address bits 212 * than expected (based on the max width), so we will shift them 213 * lower so that they will match the addresses used when 214 * device_width==max_device_width. 215 */ 216 boff = offset >> (ctz32(pfl->bank_width) + 217 ctz32(pfl->max_device_width) - ctz32(pfl->device_width)); 218 219 /* 220 * Mask off upper bits which may be used in to query block 221 * or sector lock status at other addresses. 222 * Offsets 2/3 are block lock status, is not emulated. 223 */ 224 switch (boff & 0xFF) { 225 case 0: 226 resp = pfl->ident0; 227 trace_pflash_manufacturer_id(pfl->name, resp); 228 break; 229 case 1: 230 resp = pfl->ident1; 231 trace_pflash_device_id(pfl->name, resp); 232 break; 233 default: 234 trace_pflash_device_info(pfl->name, offset); 235 return 0; 236 } 237 /* Replicate responses for each device in bank. */ 238 if (pfl->device_width < pfl->bank_width) { 239 for (i = pfl->device_width; 240 i < pfl->bank_width; i += pfl->device_width) { 241 resp = deposit32(resp, 8 * i, 8 * pfl->device_width, resp); 242 } 243 } 244 245 return resp; 246 } 247 248 static uint32_t pflash_data_read(PFlashCFI01 *pfl, hwaddr offset, 249 int width, int be) 250 { 251 uint8_t *p; 252 uint32_t ret; 253 254 p = pfl->storage; 255 if (be) { 256 ret = ldn_be_p(p + offset, width); 257 } else { 258 ret = ldn_le_p(p + offset, width); 259 } 260 trace_pflash_data_read(pfl->name, offset, width, ret); 261 return ret; 262 } 263 264 static uint32_t pflash_read(PFlashCFI01 *pfl, hwaddr offset, 265 int width, int be) 266 { 267 hwaddr boff; 268 uint32_t ret; 269 270 ret = -1; 271 switch (pfl->cmd) { 272 default: 273 /* This should never happen : reset state & treat it as a read */ 274 trace_pflash_read_unknown_state(pfl->name, pfl->cmd); 275 pfl->wcycle = 0; 276 /* 277 * The command 0x00 is not assigned by the CFI open standard, 278 * but QEMU historically uses it for the READ_ARRAY command (0xff). 279 */ 280 pfl->cmd = 0x00; 281 /* fall through to read code */ 282 case 0x00: /* This model reset value for READ_ARRAY (not CFI compliant) */ 283 /* Flash area read */ 284 ret = pflash_data_read(pfl, offset, width, be); 285 break; 286 case 0x10: /* Single byte program */ 287 case 0x20: /* Block erase */ 288 case 0x28: /* Block erase */ 289 case 0x40: /* single byte program */ 290 case 0x50: /* Clear status register */ 291 case 0x60: /* Block /un)lock */ 292 case 0x70: /* Status Register */ 293 case 0xe8: /* Write block */ 294 /* 295 * Status register read. Return status from each device in 296 * bank. 297 */ 298 ret = pfl->status; 299 if (pfl->device_width && width > pfl->device_width) { 300 int shift = pfl->device_width * 8; 301 while (shift + pfl->device_width * 8 <= width * 8) { 302 ret |= pfl->status << shift; 303 shift += pfl->device_width * 8; 304 } 305 } else if (!pfl->device_width && width > 2) { 306 /* 307 * Handle 32 bit flash cases where device width is not 308 * set. (Existing behavior before device width added.) 309 */ 310 ret |= pfl->status << 16; 311 } 312 trace_pflash_read_status(pfl->name, ret); 313 break; 314 case 0x90: 315 if (!pfl->device_width) { 316 /* Preserve old behavior if device width not specified */ 317 boff = offset & 0xFF; 318 if (pfl->bank_width == 2) { 319 boff = boff >> 1; 320 } else if (pfl->bank_width == 4) { 321 boff = boff >> 2; 322 } 323 324 switch (boff) { 325 case 0: 326 ret = pfl->ident0 << 8 | pfl->ident1; 327 trace_pflash_manufacturer_id(pfl->name, ret); 328 break; 329 case 1: 330 ret = pfl->ident2 << 8 | pfl->ident3; 331 trace_pflash_device_id(pfl->name, ret); 332 break; 333 default: 334 trace_pflash_device_info(pfl->name, boff); 335 ret = 0; 336 break; 337 } 338 } else { 339 /* 340 * If we have a read larger than the bank_width, combine multiple 341 * manufacturer/device ID queries into a single response. 342 */ 343 int i; 344 for (i = 0; i < width; i += pfl->bank_width) { 345 ret = deposit32(ret, i * 8, pfl->bank_width * 8, 346 pflash_devid_query(pfl, 347 offset + i * pfl->bank_width)); 348 } 349 } 350 break; 351 case 0x98: /* Query mode */ 352 if (!pfl->device_width) { 353 /* Preserve old behavior if device width not specified */ 354 boff = offset & 0xFF; 355 if (pfl->bank_width == 2) { 356 boff = boff >> 1; 357 } else if (pfl->bank_width == 4) { 358 boff = boff >> 2; 359 } 360 361 if (boff < sizeof(pfl->cfi_table)) { 362 ret = pfl->cfi_table[boff]; 363 } else { 364 ret = 0; 365 } 366 } else { 367 /* 368 * If we have a read larger than the bank_width, combine multiple 369 * CFI queries into a single response. 370 */ 371 int i; 372 for (i = 0; i < width; i += pfl->bank_width) { 373 ret = deposit32(ret, i * 8, pfl->bank_width * 8, 374 pflash_cfi_query(pfl, 375 offset + i * pfl->bank_width)); 376 } 377 } 378 379 break; 380 } 381 trace_pflash_io_read(pfl->name, offset, width, ret, pfl->cmd, pfl->wcycle); 382 383 return ret; 384 } 385 386 /* update flash content on disk */ 387 static void pflash_update(PFlashCFI01 *pfl, int offset, 388 int size) 389 { 390 int offset_end; 391 int ret; 392 if (pfl->blk) { 393 offset_end = offset + size; 394 /* widen to sector boundaries */ 395 offset = QEMU_ALIGN_DOWN(offset, BDRV_SECTOR_SIZE); 396 offset_end = QEMU_ALIGN_UP(offset_end, BDRV_SECTOR_SIZE); 397 ret = blk_pwrite(pfl->blk, offset, offset_end - offset, 398 pfl->storage + offset, 0); 399 if (ret < 0) { 400 /* TODO set error bit in status */ 401 error_report("Could not update PFLASH: %s", strerror(-ret)); 402 } 403 } 404 } 405 406 /* copy current flash content to block update buffer */ 407 static void pflash_blk_write_start(PFlashCFI01 *pfl, hwaddr offset) 408 { 409 hwaddr mask = ~(pfl->writeblock_size - 1); 410 411 trace_pflash_write_block_start(pfl->name, pfl->counter); 412 pfl->blk_offset = offset & mask; 413 memcpy(pfl->blk_bytes, pfl->storage + pfl->blk_offset, 414 pfl->writeblock_size); 415 } 416 417 /* commit block update buffer changes */ 418 static void pflash_blk_write_flush(PFlashCFI01 *pfl) 419 { 420 g_assert(pfl->blk_offset != -1); 421 trace_pflash_write_block_flush(pfl->name); 422 memcpy(pfl->storage + pfl->blk_offset, pfl->blk_bytes, 423 pfl->writeblock_size); 424 pflash_update(pfl, pfl->blk_offset, pfl->writeblock_size); 425 pfl->blk_offset = -1; 426 } 427 428 /* discard block update buffer changes */ 429 static void pflash_blk_write_abort(PFlashCFI01 *pfl) 430 { 431 trace_pflash_write_block_abort(pfl->name); 432 pfl->blk_offset = -1; 433 } 434 435 static inline void pflash_data_write(PFlashCFI01 *pfl, hwaddr offset, 436 uint32_t value, int width, int be) 437 { 438 uint8_t *p; 439 440 if (pfl->blk_offset != -1) { 441 /* block write: redirect writes to block update buffer */ 442 if ((offset < pfl->blk_offset) || 443 (offset + width > pfl->blk_offset + pfl->writeblock_size)) { 444 pfl->status |= 0x10; /* Programming error */ 445 return; 446 } 447 trace_pflash_data_write_block(pfl->name, offset, width, value, 448 pfl->counter); 449 p = pfl->blk_bytes + (offset - pfl->blk_offset); 450 } else { 451 /* write directly to storage */ 452 trace_pflash_data_write(pfl->name, offset, width, value); 453 p = pfl->storage + offset; 454 } 455 456 if (be) { 457 stn_be_p(p, width, value); 458 } else { 459 stn_le_p(p, width, value); 460 } 461 } 462 463 static void pflash_write(PFlashCFI01 *pfl, hwaddr offset, 464 uint32_t value, int width, int be) 465 { 466 uint8_t *p; 467 uint8_t cmd; 468 469 cmd = value; 470 471 trace_pflash_io_write(pfl->name, offset, width, value, pfl->wcycle); 472 if (!pfl->wcycle) { 473 /* Set the device in I/O access mode */ 474 memory_region_rom_device_set_romd(&pfl->mem, false); 475 } 476 477 switch (pfl->wcycle) { 478 case 0: 479 /* read mode */ 480 switch (cmd) { 481 case 0x00: /* This model reset value for READ_ARRAY (not CFI) */ 482 goto mode_read_array; 483 case 0x10: /* Single Byte Program */ 484 case 0x40: /* Single Byte Program */ 485 trace_pflash_write(pfl->name, "single byte program (0)"); 486 break; 487 case 0x20: /* Block erase */ 488 p = pfl->storage; 489 offset &= ~(pfl->sector_len - 1); 490 491 trace_pflash_write_block_erase(pfl->name, offset, pfl->sector_len); 492 493 if (!pfl->ro) { 494 memset(p + offset, 0xff, pfl->sector_len); 495 pflash_update(pfl, offset, pfl->sector_len); 496 } else { 497 pfl->status |= 0x20; /* Block erase error */ 498 } 499 pfl->status |= 0x80; /* Ready! */ 500 break; 501 case 0x50: /* Clear status bits */ 502 trace_pflash_write(pfl->name, "clear status bits"); 503 pfl->status = 0x0; 504 goto mode_read_array; 505 case 0x60: /* Block (un)lock */ 506 trace_pflash_write(pfl->name, "block unlock"); 507 break; 508 case 0x70: /* Status Register */ 509 trace_pflash_write(pfl->name, "read status register"); 510 pfl->cmd = cmd; 511 return; 512 case 0x90: /* Read Device ID */ 513 trace_pflash_write(pfl->name, "read device information"); 514 pfl->cmd = cmd; 515 return; 516 case 0x98: /* CFI query */ 517 trace_pflash_write(pfl->name, "CFI query"); 518 break; 519 case 0xe8: /* Write to buffer */ 520 trace_pflash_write(pfl->name, "write to buffer"); 521 pfl->status |= 0x80; /* Ready! */ 522 break; 523 case 0xf0: /* Probe for AMD flash */ 524 trace_pflash_write(pfl->name, "probe for AMD flash"); 525 goto mode_read_array; 526 case 0xff: /* Read Array */ 527 trace_pflash_write(pfl->name, "read array mode"); 528 goto mode_read_array; 529 default: 530 goto error_flash; 531 } 532 pfl->wcycle++; 533 pfl->cmd = cmd; 534 break; 535 case 1: 536 switch (pfl->cmd) { 537 case 0x10: /* Single Byte Program */ 538 case 0x40: /* Single Byte Program */ 539 trace_pflash_write(pfl->name, "single byte program (1)"); 540 if (!pfl->ro) { 541 pflash_data_write(pfl, offset, value, width, be); 542 pflash_update(pfl, offset, width); 543 } else { 544 pfl->status |= 0x10; /* Programming error */ 545 } 546 pfl->status |= 0x80; /* Ready! */ 547 pfl->wcycle = 0; 548 break; 549 case 0x20: /* Block erase */ 550 case 0x28: 551 if (cmd == 0xd0) { /* confirm */ 552 pfl->wcycle = 0; 553 pfl->status |= 0x80; 554 } else if (cmd == 0xff) { /* Read Array */ 555 goto mode_read_array; 556 } else 557 goto error_flash; 558 559 break; 560 case 0xe8: 561 /* 562 * Mask writeblock size based on device width, or bank width if 563 * device width not specified. 564 */ 565 /* FIXME check @offset, @width */ 566 if (pfl->device_width) { 567 value = extract32(value, 0, pfl->device_width * 8); 568 } else { 569 value = extract32(value, 0, pfl->bank_width * 8); 570 } 571 pfl->counter = value; 572 pfl->wcycle++; 573 break; 574 case 0x60: 575 if (cmd == 0xd0) { 576 pfl->wcycle = 0; 577 pfl->status |= 0x80; 578 } else if (cmd == 0x01) { 579 pfl->wcycle = 0; 580 pfl->status |= 0x80; 581 } else if (cmd == 0xff) { /* Read Array */ 582 goto mode_read_array; 583 } else { 584 trace_pflash_write(pfl->name, "unknown (un)locking command"); 585 goto mode_read_array; 586 } 587 break; 588 case 0x98: 589 if (cmd == 0xff) { /* Read Array */ 590 goto mode_read_array; 591 } else { 592 trace_pflash_write(pfl->name, "leaving query mode"); 593 } 594 break; 595 default: 596 goto error_flash; 597 } 598 break; 599 case 2: 600 switch (pfl->cmd) { 601 case 0xe8: /* Block write */ 602 /* FIXME check @offset, @width */ 603 if (pfl->blk_offset == -1 && pfl->counter) { 604 pflash_blk_write_start(pfl, offset); 605 } 606 if (!pfl->ro && (pfl->blk_offset != -1)) { 607 pflash_data_write(pfl, offset, value, width, be); 608 } else { 609 pfl->status |= 0x10; /* Programming error */ 610 } 611 612 pfl->status |= 0x80; 613 614 if (!pfl->counter) { 615 trace_pflash_write(pfl->name, "block write finished"); 616 pfl->wcycle++; 617 break; 618 } 619 620 pfl->counter--; 621 break; 622 default: 623 goto error_flash; 624 } 625 break; 626 case 3: /* Confirm mode */ 627 switch (pfl->cmd) { 628 case 0xe8: /* Block write */ 629 if ((cmd == 0xd0) && !(pfl->status & 0x10)) { 630 pflash_blk_write_flush(pfl); 631 pfl->wcycle = 0; 632 pfl->status |= 0x80; 633 } else { 634 pflash_blk_write_abort(pfl); 635 goto mode_read_array; 636 } 637 break; 638 default: 639 pflash_blk_write_abort(pfl); 640 goto error_flash; 641 } 642 break; 643 default: 644 /* Should never happen */ 645 trace_pflash_write(pfl->name, "invalid write state"); 646 goto mode_read_array; 647 } 648 return; 649 650 error_flash: 651 qemu_log_mask(LOG_UNIMP, "%s: Unimplemented flash cmd sequence " 652 "(offset " HWADDR_FMT_plx ", wcycle 0x%x cmd 0x%x value 0x%x)" 653 "\n", __func__, offset, pfl->wcycle, pfl->cmd, value); 654 655 mode_read_array: 656 trace_pflash_mode_read_array(pfl->name); 657 memory_region_rom_device_set_romd(&pfl->mem, true); 658 pfl->wcycle = 0; 659 pfl->cmd = 0x00; /* This model reset value for READ_ARRAY (not CFI) */ 660 } 661 662 663 static MemTxResult pflash_mem_read_with_attrs(void *opaque, hwaddr addr, uint64_t *value, 664 unsigned len, MemTxAttrs attrs) 665 { 666 PFlashCFI01 *pfl = opaque; 667 bool be = !!(pfl->features & (1 << PFLASH_BE)); 668 669 if ((pfl->features & (1 << PFLASH_SECURE)) && !attrs.secure) { 670 *value = pflash_data_read(opaque, addr, len, be); 671 } else { 672 *value = pflash_read(opaque, addr, len, be); 673 } 674 return MEMTX_OK; 675 } 676 677 static MemTxResult pflash_mem_write_with_attrs(void *opaque, hwaddr addr, uint64_t value, 678 unsigned len, MemTxAttrs attrs) 679 { 680 PFlashCFI01 *pfl = opaque; 681 bool be = !!(pfl->features & (1 << PFLASH_BE)); 682 683 if ((pfl->features & (1 << PFLASH_SECURE)) && !attrs.secure) { 684 return MEMTX_ERROR; 685 } else { 686 pflash_write(opaque, addr, value, len, be); 687 return MEMTX_OK; 688 } 689 } 690 691 static const MemoryRegionOps pflash_cfi01_ops = { 692 .read_with_attrs = pflash_mem_read_with_attrs, 693 .write_with_attrs = pflash_mem_write_with_attrs, 694 .endianness = DEVICE_NATIVE_ENDIAN, 695 }; 696 697 static void pflash_cfi01_fill_cfi_table(PFlashCFI01 *pfl) 698 { 699 uint64_t blocks_per_device, sector_len_per_device, device_len; 700 int num_devices; 701 702 /* 703 * These are only used to expose the parameters of each device 704 * in the cfi_table[]. 705 */ 706 num_devices = pfl->device_width ? (pfl->bank_width / pfl->device_width) : 1; 707 if (pfl->old_multiple_chip_handling) { 708 blocks_per_device = pfl->nb_blocs / num_devices; 709 sector_len_per_device = pfl->sector_len; 710 } else { 711 blocks_per_device = pfl->nb_blocs; 712 sector_len_per_device = pfl->sector_len / num_devices; 713 } 714 device_len = sector_len_per_device * blocks_per_device; 715 716 /* Hardcoded CFI table */ 717 /* Standard "QRY" string */ 718 pfl->cfi_table[0x10] = 'Q'; 719 pfl->cfi_table[0x11] = 'R'; 720 pfl->cfi_table[0x12] = 'Y'; 721 /* Command set (Intel) */ 722 pfl->cfi_table[0x13] = 0x01; 723 pfl->cfi_table[0x14] = 0x00; 724 /* Primary extended table address (none) */ 725 pfl->cfi_table[0x15] = 0x31; 726 pfl->cfi_table[0x16] = 0x00; 727 /* Alternate command set (none) */ 728 pfl->cfi_table[0x17] = 0x00; 729 pfl->cfi_table[0x18] = 0x00; 730 /* Alternate extended table (none) */ 731 pfl->cfi_table[0x19] = 0x00; 732 pfl->cfi_table[0x1A] = 0x00; 733 /* Vcc min */ 734 pfl->cfi_table[0x1B] = 0x45; 735 /* Vcc max */ 736 pfl->cfi_table[0x1C] = 0x55; 737 /* Vpp min (no Vpp pin) */ 738 pfl->cfi_table[0x1D] = 0x00; 739 /* Vpp max (no Vpp pin) */ 740 pfl->cfi_table[0x1E] = 0x00; 741 /* Reserved */ 742 pfl->cfi_table[0x1F] = 0x07; 743 /* Timeout for min size buffer write */ 744 pfl->cfi_table[0x20] = 0x07; 745 /* Typical timeout for block erase */ 746 pfl->cfi_table[0x21] = 0x0a; 747 /* Typical timeout for full chip erase (4096 ms) */ 748 pfl->cfi_table[0x22] = 0x00; 749 /* Reserved */ 750 pfl->cfi_table[0x23] = 0x04; 751 /* Max timeout for buffer write */ 752 pfl->cfi_table[0x24] = 0x04; 753 /* Max timeout for block erase */ 754 pfl->cfi_table[0x25] = 0x04; 755 /* Max timeout for chip erase */ 756 pfl->cfi_table[0x26] = 0x00; 757 /* Device size */ 758 pfl->cfi_table[0x27] = ctz32(device_len); /* + 1; */ 759 /* Flash device interface (8 & 16 bits) */ 760 pfl->cfi_table[0x28] = 0x02; 761 pfl->cfi_table[0x29] = 0x00; 762 /* Max number of bytes in multi-bytes write */ 763 if (pfl->bank_width == 1) { 764 pfl->cfi_table[0x2A] = 0x08; 765 } else { 766 pfl->cfi_table[0x2A] = 0x0B; 767 } 768 pfl->writeblock_size = 1 << pfl->cfi_table[0x2A]; 769 if (!pfl->old_multiple_chip_handling && num_devices > 1) { 770 pfl->writeblock_size *= num_devices; 771 } 772 773 pfl->cfi_table[0x2B] = 0x00; 774 /* Number of erase block regions (uniform) */ 775 pfl->cfi_table[0x2C] = 0x01; 776 /* Erase block region 1 */ 777 pfl->cfi_table[0x2D] = blocks_per_device - 1; 778 pfl->cfi_table[0x2E] = (blocks_per_device - 1) >> 8; 779 pfl->cfi_table[0x2F] = sector_len_per_device >> 8; 780 pfl->cfi_table[0x30] = sector_len_per_device >> 16; 781 782 /* Extended */ 783 pfl->cfi_table[0x31] = 'P'; 784 pfl->cfi_table[0x32] = 'R'; 785 pfl->cfi_table[0x33] = 'I'; 786 787 pfl->cfi_table[0x34] = '1'; 788 pfl->cfi_table[0x35] = '0'; 789 790 pfl->cfi_table[0x36] = 0x00; 791 pfl->cfi_table[0x37] = 0x00; 792 pfl->cfi_table[0x38] = 0x00; 793 pfl->cfi_table[0x39] = 0x00; 794 795 pfl->cfi_table[0x3a] = 0x00; 796 797 pfl->cfi_table[0x3b] = 0x00; 798 pfl->cfi_table[0x3c] = 0x00; 799 800 pfl->cfi_table[0x3f] = 0x01; /* Number of protection fields */ 801 } 802 803 static void pflash_cfi01_realize(DeviceState *dev, Error **errp) 804 { 805 ERRP_GUARD(); 806 PFlashCFI01 *pfl = PFLASH_CFI01(dev); 807 uint64_t total_len; 808 int ret; 809 810 if (pfl->sector_len == 0) { 811 error_setg(errp, "attribute \"sector-length\" not specified or zero."); 812 return; 813 } 814 if (pfl->nb_blocs == 0) { 815 error_setg(errp, "attribute \"num-blocks\" not specified or zero."); 816 return; 817 } 818 if (pfl->name == NULL) { 819 error_setg(errp, "attribute \"name\" not specified."); 820 return; 821 } 822 823 total_len = pfl->sector_len * pfl->nb_blocs; 824 825 memory_region_init_rom_device( 826 &pfl->mem, OBJECT(dev), 827 &pflash_cfi01_ops, 828 pfl, 829 pfl->name, total_len, errp); 830 if (*errp) { 831 return; 832 } 833 834 pfl->storage = memory_region_get_ram_ptr(&pfl->mem); 835 sysbus_init_mmio(SYS_BUS_DEVICE(dev), &pfl->mem); 836 837 if (pfl->blk) { 838 uint64_t perm; 839 pfl->ro = !blk_supports_write_perm(pfl->blk); 840 perm = BLK_PERM_CONSISTENT_READ | (pfl->ro ? 0 : BLK_PERM_WRITE); 841 ret = blk_set_perm(pfl->blk, perm, BLK_PERM_ALL, errp); 842 if (ret < 0) { 843 return; 844 } 845 } else { 846 pfl->ro = false; 847 } 848 849 if (pfl->blk) { 850 if (!blk_check_size_and_read_all(pfl->blk, dev, pfl->storage, 851 total_len, errp)) { 852 vmstate_unregister_ram(&pfl->mem, DEVICE(pfl)); 853 return; 854 } 855 } 856 857 /* 858 * Default to devices being used at their maximum device width. This was 859 * assumed before the device_width support was added. 860 */ 861 if (!pfl->max_device_width) { 862 pfl->max_device_width = pfl->device_width; 863 } 864 865 pfl->wcycle = 0; 866 /* 867 * The command 0x00 is not assigned by the CFI open standard, 868 * but QEMU historically uses it for the READ_ARRAY command (0xff). 869 */ 870 pfl->cmd = 0x00; 871 pfl->status = 0x80; /* WSM ready */ 872 pflash_cfi01_fill_cfi_table(pfl); 873 874 pfl->blk_bytes = g_malloc(pfl->writeblock_size); 875 pfl->blk_offset = -1; 876 } 877 878 static void pflash_cfi01_system_reset(DeviceState *dev) 879 { 880 PFlashCFI01 *pfl = PFLASH_CFI01(dev); 881 882 trace_pflash_reset(pfl->name); 883 /* 884 * The command 0x00 is not assigned by the CFI open standard, 885 * but QEMU historically uses it for the READ_ARRAY command (0xff). 886 */ 887 pfl->cmd = 0x00; 888 pfl->wcycle = 0; 889 memory_region_rom_device_set_romd(&pfl->mem, true); 890 /* 891 * The WSM ready timer occurs at most 150ns after system reset. 892 * This model deliberately ignores this delay. 893 */ 894 pfl->status = 0x80; 895 896 pfl->blk_offset = -1; 897 } 898 899 static Property pflash_cfi01_properties[] = { 900 DEFINE_PROP_DRIVE("drive", PFlashCFI01, blk), 901 /* num-blocks is the number of blocks actually visible to the guest, 902 * ie the total size of the device divided by the sector length. 903 * If we're emulating flash devices wired in parallel the actual 904 * number of blocks per individual device will differ. 905 */ 906 DEFINE_PROP_UINT32("num-blocks", PFlashCFI01, nb_blocs, 0), 907 DEFINE_PROP_UINT64("sector-length", PFlashCFI01, sector_len, 0), 908 /* width here is the overall width of this QEMU device in bytes. 909 * The QEMU device may be emulating a number of flash devices 910 * wired up in parallel; the width of each individual flash 911 * device should be specified via device-width. If the individual 912 * devices have a maximum width which is greater than the width 913 * they are being used for, this maximum width should be set via 914 * max-device-width (which otherwise defaults to device-width). 915 * So for instance a 32-bit wide QEMU flash device made from four 916 * 16-bit flash devices used in 8-bit wide mode would be configured 917 * with width = 4, device-width = 1, max-device-width = 2. 918 * 919 * If device-width is not specified we default to backwards 920 * compatible behaviour which is a bad emulation of two 921 * 16 bit devices making up a 32 bit wide QEMU device. This 922 * is deprecated for new uses of this device. 923 */ 924 DEFINE_PROP_UINT8("width", PFlashCFI01, bank_width, 0), 925 DEFINE_PROP_UINT8("device-width", PFlashCFI01, device_width, 0), 926 DEFINE_PROP_UINT8("max-device-width", PFlashCFI01, max_device_width, 0), 927 DEFINE_PROP_BIT("big-endian", PFlashCFI01, features, PFLASH_BE, 0), 928 DEFINE_PROP_BIT("secure", PFlashCFI01, features, PFLASH_SECURE, 0), 929 DEFINE_PROP_UINT16("id0", PFlashCFI01, ident0, 0), 930 DEFINE_PROP_UINT16("id1", PFlashCFI01, ident1, 0), 931 DEFINE_PROP_UINT16("id2", PFlashCFI01, ident2, 0), 932 DEFINE_PROP_UINT16("id3", PFlashCFI01, ident3, 0), 933 DEFINE_PROP_STRING("name", PFlashCFI01, name), 934 DEFINE_PROP_BOOL("old-multiple-chip-handling", PFlashCFI01, 935 old_multiple_chip_handling, false), 936 DEFINE_PROP_END_OF_LIST(), 937 }; 938 939 static void pflash_cfi01_class_init(ObjectClass *klass, void *data) 940 { 941 DeviceClass *dc = DEVICE_CLASS(klass); 942 943 device_class_set_legacy_reset(dc, pflash_cfi01_system_reset); 944 dc->realize = pflash_cfi01_realize; 945 device_class_set_props(dc, pflash_cfi01_properties); 946 dc->vmsd = &vmstate_pflash; 947 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); 948 } 949 950 951 static const TypeInfo pflash_cfi01_info = { 952 .name = TYPE_PFLASH_CFI01, 953 .parent = TYPE_SYS_BUS_DEVICE, 954 .instance_size = sizeof(PFlashCFI01), 955 .class_init = pflash_cfi01_class_init, 956 }; 957 958 static void pflash_cfi01_register_types(void) 959 { 960 type_register_static(&pflash_cfi01_info); 961 } 962 963 type_init(pflash_cfi01_register_types) 964 965 PFlashCFI01 *pflash_cfi01_register(hwaddr base, 966 const char *name, 967 hwaddr size, 968 BlockBackend *blk, 969 uint32_t sector_len, 970 int bank_width, 971 uint16_t id0, uint16_t id1, 972 uint16_t id2, uint16_t id3, 973 int be) 974 { 975 DeviceState *dev = qdev_new(TYPE_PFLASH_CFI01); 976 977 if (blk) { 978 qdev_prop_set_drive(dev, "drive", blk); 979 } 980 assert(QEMU_IS_ALIGNED(size, sector_len)); 981 qdev_prop_set_uint32(dev, "num-blocks", size / sector_len); 982 qdev_prop_set_uint64(dev, "sector-length", sector_len); 983 qdev_prop_set_uint8(dev, "width", bank_width); 984 qdev_prop_set_bit(dev, "big-endian", !!be); 985 qdev_prop_set_uint16(dev, "id0", id0); 986 qdev_prop_set_uint16(dev, "id1", id1); 987 qdev_prop_set_uint16(dev, "id2", id2); 988 qdev_prop_set_uint16(dev, "id3", id3); 989 qdev_prop_set_string(dev, "name", name); 990 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); 991 992 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); 993 return PFLASH_CFI01(dev); 994 } 995 996 BlockBackend *pflash_cfi01_get_blk(PFlashCFI01 *fl) 997 { 998 return fl->blk; 999 } 1000 1001 MemoryRegion *pflash_cfi01_get_memory(PFlashCFI01 *fl) 1002 { 1003 return &fl->mem; 1004 } 1005 1006 /* 1007 * Handle -drive if=pflash for machines that use properties. 1008 * If @dinfo is null, do nothing. 1009 * Else if @fl's property "drive" is already set, fatal error. 1010 * Else set it to the BlockBackend with @dinfo. 1011 */ 1012 void pflash_cfi01_legacy_drive(PFlashCFI01 *fl, DriveInfo *dinfo) 1013 { 1014 Location loc; 1015 1016 if (!dinfo) { 1017 return; 1018 } 1019 1020 loc_push_none(&loc); 1021 qemu_opts_loc_restore(dinfo->opts); 1022 if (fl->blk) { 1023 error_report("clashes with -machine"); 1024 exit(1); 1025 } 1026 qdev_prop_set_drive_err(DEVICE(fl), "drive", blk_by_legacy_dinfo(dinfo), 1027 &error_fatal); 1028 loc_pop(&loc); 1029 } 1030 1031 static void postload_update_cb(void *opaque, bool running, RunState state) 1032 { 1033 PFlashCFI01 *pfl = opaque; 1034 1035 /* This is called after bdrv_activate_all. */ 1036 qemu_del_vm_change_state_handler(pfl->vmstate); 1037 pfl->vmstate = NULL; 1038 1039 trace_pflash_postload_cb(pfl->name); 1040 pflash_update(pfl, 0, pfl->sector_len * pfl->nb_blocs); 1041 } 1042 1043 static int pflash_post_load(void *opaque, int version_id) 1044 { 1045 PFlashCFI01 *pfl = opaque; 1046 1047 if (!pfl->ro) { 1048 pfl->vmstate = qemu_add_vm_change_state_handler(postload_update_cb, 1049 pfl); 1050 } 1051 return 0; 1052 } 1053