1[Unit]
2Description=tgtd iSCSI target daemon
3After=network.target
4
5[Service]
6EnvironmentFile=@SYSCONFDIR@/sysconfig/tgtd
7
8ExecStart=@SBINDIR@/tgtd -f $TGTD_OPTS
9# see bz 848942. workaround for a race for now.
10ExecStartPost=@BASE_BINDIR@/sleep 5
11# Put tgtd into "offline" state until all the targets are configured.
12# We don't want initiators to (re)connect and fail the connection
13# if it's not ready.
14ExecStartPost=@SBINDIR@/tgtadm --op update --mode sys --name State -v offline
15# Configure the targets.
16ExecStartPost=@SBINDIR@/tgt-admin -e -c $TGTD_CONFIG
17# Put tgtd into "ready" state.
18ExecStartPost=@SBINDIR@/tgtadm --op update --mode sys --name State -v ready
19
20# Update configuration for targets. Only targets which
21# are not in use will be updated.
22ExecReload=@SBINDIR@/tgt-admin --update ALL -c $TGTD_CONFIG
23
24# NOTE: Shutdown of the iscsi target may cause data corruption
25# for initiators that are connected.
26ExecStop=@SBINDIR@/tgtadm --op update --mode sys --name State -v offline
27# Remove all targets. It only removes targets which are not in use.
28ExecStop=@SBINDIR@/tgt-admin --update ALL -c /dev/null
29# tgtd will exit if all targets were removed
30ExecStop=@SBINDIR@/tgtadm --op delete --mode system
31
32[Install]
33WantedBy=multi-user.target
34