1[Unit] 2Description=tgtd iSCSI target daemon 3After=network.target 4 5[Service] 6EnvironmentFile=@SYSCONFDIR@/sysconfig/tgtd 7 8ExecStart=@SBINDIR@/tgtd -f $TGTD_OPTS 9# see bz 848942. workaround for a race for now. 10ExecStartPost=@BASE_BINDIR@/sleep 5 11# Put tgtd into "offline" state until all the targets are configured. 12# We don't want initiators to (re)connect and fail the connection 13# if it's not ready. 14ExecStartPost=@SBINDIR@/tgtadm --op update --mode sys --name State -v offline 15# Configure the targets. 16ExecStartPost=@SBINDIR@/tgt-admin -e -c $TGTD_CONFIG 17# Put tgtd into "ready" state. 18ExecStartPost=@SBINDIR@/tgtadm --op update --mode sys --name State -v ready 19 20# Update configuration for targets. Only targets which 21# are not in use will be updated. 22ExecReload=@SBINDIR@/tgt-admin --update ALL -c $TGTD_CONFIG 23 24# NOTE: Shutdown of the iscsi target may cause data corruption 25# for initiators that are connected. 26ExecStop=@SBINDIR@/tgtadm --op update --mode sys --name State -v offline 27# Remove all targets. It only removes targets which are not in use. 28ExecStop=@SBINDIR@/tgt-admin --update ALL -c /dev/null 29# tgtd will exit if all targets were removed 30ExecStop=@SBINDIR@/tgtadm --op delete --mode system 31 32[Install] 33WantedBy=multi-user.target 34