1*** Settings ***
2
3Documentation    Module to test IPMI asset tag functionality.
4Resource         ../lib/ipmi_client.robot
5Resource         ../lib/openbmc_ffdc.robot
6Variables        ../data/ipmi_raw_cmd_table.py
7Variables        ../data/ipmi_variable.py
8Library          ../lib/bmc_network_utils.py
9Library          ../lib/ipmi_utils.py
10
11Test Teardown    FFDC On Test Case Fail
12
13*** Test Cases ***
14
15Verify Get DCMI Capabilities
16    [Documentation]  Verify get DCMI capabilities command output.
17    [Tags]  Verify_Get_DCMI_Capabilities
18    ${cmd_output}=  Run IPMI Standard Command  dcmi discover
19
20    @{supported_capabilities}=  Create List
21    # Supported DCMI capabilities:
22    ...  Mandatory platform capabilties
23    ...  Optional platform capabilties
24    ...  Power management available
25    ...  Managebility access capabilties
26    ...  In-band KCS channel available
27    # Mandatory platform attributes:
28    ...  200 SEL entries
29    ...  SEL automatic rollover is enabled
30    # Optional Platform Attributes:
31    ...  Slave address of device: 0h (8bits)(Satellite/External controller)
32    ...  Channel number is 0h (Primary BMC)
33    ...  Device revision is 0
34    # Manageability Access Attributes:
35    ...  Primary LAN channel number: 1 is available
36    ...  Secondary LAN channel is not available for OOB
37    ...  No serial channel is available
38
39    FOR  ${capability}  IN  @{supported_capabilities}
40      Should Contain  ${cmd_output}  ${capability}  ignore_case=True
41      ...  msg=Supported DCMI capabilities not present.
42    END
43
44
45Test Get Self Test Results via IPMI Raw Command
46    [Documentation]  Get self test results via IPMI raw command and verify the output.
47    [Tags]  Test_Get_Self_Test_Results_via_IPMI
48
49    ${resp}=  Run IPMI Standard Command  raw ${IPMI_RAW_CMD['Self_Test_Results']['Get'][0]}
50
51    # 55h = No error. All Self Tests Passed.
52    # 56h = Self Test function not implemented in this controller.
53    Should Contain Any  ${resp}  55 00  56 00
54
55
56Test Get Device GUID Via IPMI Raw Command
57    [Documentation]  Get device GUID via IPMI raw command and verify it using Redfish.
58    [Tags]  Test_Get_Device_GUID_via_IPMI_and_Verify_via_Redfish
59    [Teardown]  Run Keywords  Redfish.Logout  AND  FFDC On Test Case Fail
60    # Get GUIDS via IPMI.
61    # This should match the /redfish/v1/Managers/bmc's UUID data.
62    ${guids}=  Run IPMI Standard Command  raw ${IPMI_RAW_CMD['Device GUID']['Get'][0]}
63    # Reverse the order and remove space delims.
64    ${guids}=  Split String  ${guids}
65    Reverse List  ${guids}
66    ${guids}=  Evaluate  "".join(${guids})
67
68    Redfish.Login
69    ${uuid}=  Redfish.Get Attribute  /redfish/v1/Managers/bmc  UUID
70    ${uuid}=  Remove String  ${uuid}  -
71
72    Rprint Vars  guids  uuid
73    Valid Value  uuid  ['${guids}']
74
75
76Verify Get Channel Info via IPMI
77    [Documentation]  Verify get channel info via IPMI.
78    [Tags]  Verify_Get_Channel_Info_via_IPMI
79
80    # Get channel info via ipmi command "ipmitool channel info [channel number]".
81    # Verify channel info with files "channel_access_volatile.json", "channel_access_nv.json"
82    # and "channel_config.json" in BMC.
83
84    # Example output from 'Get Channel Info':
85    # channel_info:
86    #   [channel_0x2_info]:
87    #     [channel_medium_type]:                        802.3 LAN
88    #     [channel_protocol_type]:                      IPMB-1.0
89    #     [session_support]:                            multi-session
90    #     [active_session_count]:                       0
91    #     [protocol_vendor_id]:                         7154
92    #   [volatile(active)_settings]:
93    #       [alerting]:                                 enabled
94    #       [per-message_auth]:                         enabled
95    #       [user_level_auth]:                          enabled
96    #       [access_mode]:                              always available
97    #   [Non-Volatile Settings]:
98    #       [alerting]:                                 enabled
99    #       [per-message_auth]:                         enabled
100    #       [user_level_auth]:                          enabled
101    #       [access_mode]:                              always available
102
103    ${channel_info_ipmi}=  Get Channel Info  ${CHANNEL_NUMBER}
104    ${active_channel_config}=  Get Active Channel Config
105    ${channel_volatile_data_config}=  Get Channel Access Config  /run/ipmi/channel_access_volatile.json
106    ${channel_nv_data_config}=  Get Channel Access Config  /var/lib/ipmi/channel_access_nv.json
107
108    Rprint Vars  channel_info_ipmi  active_channel_config  channel_volatile_data_config  channel_nv_data_config
109
110    Valid Value  medium_type_ipmi_conf_map['${channel_info_ipmi['channel_0x${CHANNEL_NUMBER}_info']['channel_medium_type']}']
111    ...  ['${active_channel_config['${CHANNEL_NUMBER}']['channel_info']['medium_type']}']
112
113    Valid Value  protocol_type_ipmi_conf_map['${channel_info_ipmi['channel_0x${CHANNEL_NUMBER}_info']['channel_protocol_type']}']
114    ...  ['${active_channel_config['${CHANNEL_NUMBER}']['channel_info']['protocol_type']}']
115
116    Valid Value  channel_info_ipmi['channel_0x${CHANNEL_NUMBER}_info']['session_support']
117    ...  ['${active_channel_config['${CHANNEL_NUMBER}']['channel_info']['session_supported']}']
118
119    Valid Value  channel_info_ipmi['channel_0x${CHANNEL_NUMBER}_info']['active_session_count']
120    ...  ['${active_channel_config['${CHANNEL_NUMBER}']['active_sessions']}']
121    # IPMI Spec: The IPMI Enterprise Number is: 7154 (decimal)
122    Valid Value  channel_info_ipmi['channel_0x${CHANNEL_NUMBER}_info']['protocol_vendor_id']  ['7154']
123
124    # Verify volatile(active)_settings
125    Valid Value  disabled_ipmi_conf_map['${channel_info_ipmi['volatile(active)_settings']['alerting']}']
126    ...  ['${channel_volatile_data_config['${CHANNEL_NUMBER}']['alerting_disabled']}']
127
128    Valid Value  disabled_ipmi_conf_map['${channel_info_ipmi['volatile(active)_settings']['per-message_auth']}']
129    ...  ['${channel_volatile_data_config['${CHANNEL_NUMBER}']['per_msg_auth_disabled']}']
130
131    Valid Value  disabled_ipmi_conf_map['${channel_info_ipmi['volatile(active)_settings']['user_level_auth']}']
132    ...  ['${channel_volatile_data_config['${CHANNEL_NUMBER}']['user_auth_disabled']}']
133
134    Valid Value  access_mode_ipmi_conf_map['${channel_info_ipmi['volatile(active)_settings']['access_mode']}']
135    ...  ['${channel_volatile_data_config['${CHANNEL_NUMBER}']['access_mode']}']
136
137    # Verify Non-Volatile Settings
138    Valid Value  disabled_ipmi_conf_map['${channel_info_ipmi['non-volatile_settings']['alerting']}']
139    ...  ['${channel_nv_data_config['${CHANNEL_NUMBER}']['alerting_disabled']}']
140
141    Valid Value  disabled_ipmi_conf_map['${channel_info_ipmi['non-volatile_settings']['per-message_auth']}']
142    ...  ['${channel_nv_data_config['${CHANNEL_NUMBER}']['per_msg_auth_disabled']}']
143
144    Valid Value  disabled_ipmi_conf_map['${channel_info_ipmi['non-volatile_settings']['user_level_auth']}']
145    ...  ['${channel_nv_data_config['${CHANNEL_NUMBER}']['user_auth_disabled']}']
146
147    Valid Value  access_mode_ipmi_conf_map['${channel_info_ipmi['non-volatile_settings']['access_mode']}']
148    ...  ['${channel_nv_data_config['${CHANNEL_NUMBER}']['access_mode']}']
149
150
151Test Get Channel Authentication Capabilities via IPMI
152    [Documentation]  Test get channel authentication capabilities via IPMI.
153    [Tags]  Test_Get_Channel_Authentication_Capabilities_via_IPMI
154
155    ${channel_auth_cap}=  Get Channel Auth Capabilities  ${CHANNEL_NUMBER}
156    Rprint Vars  channel_auth_cap
157
158    Valid Value  channel_auth_cap['channel_number']  ['${CHANNEL_NUMBER}']
159    Valid Value  channel_auth_cap['kg_status']  ['default (all zeroes)']
160    Valid Value  channel_auth_cap['per_message_authentication']  ['enabled']
161    Valid Value  channel_auth_cap['user_level_authentication']  ['enabled']
162    Valid Value  channel_auth_cap['non-null_user_names_exist']  ['yes']
163    Valid Value  channel_auth_cap['null_user_names_exist']  ['no']
164    Valid Value  channel_auth_cap['anonymous_login_enabled']  ['no']
165    Valid Value  channel_auth_cap['channel_supports_ipmi_v1.5']  ['no']
166    Valid Value  channel_auth_cap['channel_supports_ipmi_v2.0']  ['yes']
167
168
169Verify Set Session Privilege Level via IPMI Raw Command
170    [Documentation]  Set session privilege with given privilege level and verify the response with
171    ...              expected level.
172    [Tags]  Verify_Set_Session_Privilege_Level_via_IPMI_Raw_Command
173    [Template]  Set Session Privilege Level And Verify
174
175    # privilege_level   expected_level
176    0x00                04
177    0x02                02
178    0x03                03
179    0x04                04
180
181
182Verify Set Invalid Session Privilege Level via IPMI Raw Command
183    [Documentation]  Verify set invalid session privilege level via IPMI raw command.
184    [Tags]  Verify_Set_Invalid_Session_Privilege_Level_Via_IPMI_Raw_Command
185    [Template]  Set Invalid Session Privilege Level And Verify
186
187    # invalid_privilege_level
188    0x05
189    0x06
190    0x07
191    0x0F
192
193
194Verify Close Session via IPMI
195    [Documentation]  Verify close session via IPMI.
196    [Tags]  Verify_Close_Session_Via_IPMI
197
198    # The "close session command" can be tested with any out-of-band IPMI command.
199    # When the session is about to close, it will execute the close session command at the end.
200
201    ${cmd}=  Catenate  mc info -vvv 2>&1 | grep "Closed Session"
202    ${cmd_output}=  Run External IPMI Standard Command  ${cmd}
203
204    Should Contain  ${cmd_output}  Closed Session
205
206
207*** Keywords ***
208
209Set Session Privilege Level And Verify
210    [Documentation]   Set session privilege with given privilege level and verify the response with
211    ...               expected level.
212    [Arguments]  ${privilege_level}  ${expected_level}
213    # Description of argument(s):
214    # privilege_level    Requested Privilege Level.
215    # expected_level     New Privilege Level (or present level if ‘return present privilege level’ was selected).
216
217    ${resp}=  Run IPMI Command
218    ...  0x06 0x3b ${privilege_level}
219    Should Contain  ${resp}  ${expected_level}
220
221
222Set Invalid Session Privilege Level And Verify
223    [Documentation]   Set invalid session privilege level and verify the response.
224    [Arguments]  ${privilege_level}
225    # Description of argument(s):
226    # privilege_level    Requested Privilege Level.
227
228    # Verify requested level exceeds Channel and/or User Privilege Limit.
229    ${msg}=  Run Keyword And Expect Error  *  Run IPMI Command
230    ...  0x06 0x3b ${privilege_level}
231    Should Contain  ${msg}  Unknown  rsp=0x81
232